2
EDUCATION LEED GA, 2016 Certified IRCA, QMS Lead Auditor [ISO9001], 2015 BSc. Electromechanical Engineering, Alexandria University, Egypt, 2014 I.G.C.S.E graduate, 2009 A Level ICT [A] A Level Math. [A] AS Level Physics [B] PROFESSION Electromechanical Engineer NATIONALITY Egyptian FLUENT LANGUAGES English, Arabic IT SKILLS Microsoft Office AutoCAD Adobe Acrobat MATLAB Contact Information Mobile No. +201146692880 +974 50309313 +971 50 976 5823 E-mail [email protected] Kareem Ragab MEP QA/QC Engineer, Electromechanical Engineer SUMMARY OF QUALIFICATIONS I'm an Electromechanical Engineer, Class 2014. My graduation project was fabricating a FDM 3D printer by which we made the design and almost everything by ourselves. I was graduated from High school as an IGCSE student (Cambridge and Edexcel Examination boards) with high grades. Additionally, I'm a certified IRCA Lead Auditor & accredited LEED GA PROFESSIONAL EXPERIENCE Khayyat Contracting & Trading, Doha, Qatar 10th of May 2015 to 20 th of August 2016 MEP QA/QC Engineer - Panorama Residence and Suites, Abraj Quartier Tower AQ-07 (End User; Hilton). MEP QA/QC Engineer - Development of The Duhail Internal Security Forces “ISFcamp, the Traffic control center (TCC) Project. Insuring that the MEP work (Firefighting, Plumbing, HVAC, Chilled Water, Drainage, Electrical work including low current containment) being done on site is as per method statement, as well as, the MEP sub-contractors are following the project’s quality management system. Reviewing Material receiving inspections raised by subcontractor And assuring the compliance of material with the material submittal raised and approved by the consultant. Issuing & releasing MEP work Inspection and Test Requests to the consultant and achieving the consultant’s approval upon the work done. Issuing MEP clearances to the construction team to proceed their work. Participating and attending Quality Audits

Kareem Ragab CV [3:09]

Embed Size (px)

Citation preview

Page 1: Kareem Ragab CV [3:09]

EDUCATION LEED GA, 2016 Certified IRCA, QMS Lead Auditor [ISO9001], 2015 BSc. Electromechanical Engineering, Alexandria University, Egypt, 2014 I.G.C.S.E graduate, 2009 A Level ICT [A] A Level Math. [A] AS Level Physics [B]

PROFESSION Electromechanical Engineer

NATIONALITY Egyptian

FLUENT LANGUAGES English, Arabic IT SKILLS Microsoft Office AutoCAD

Adobe Acrobat MATLAB

Contact Information Mobile No. +201146692880

+974 50309313 +971 50 976 5823 E-mail

[email protected]

Kareem Ragab MEP QA/QC Engineer,

Electromechanical Engineer

SUMMARY OF QUALIFICATIONS

I'm an Electromechanical Engineer, Class 2014. My graduation project was fabricating a FDM 3D printer by which we made the design and almost everything by ourselves. I was graduated from High school as an IGCSE student (Cambridge and Edexcel Examination boards) with high grades. Additionally, I'm a certified IRCA Lead Auditor & accredited LEED GA PROFESSIONAL EXPERIENCE

Khayyat Contracting & Trading, Doha, Qatar 10th of May 2015 to 20th of August 2016

MEP QA/QC Engineer - Panorama Residence and Suites, Abraj Quartier Tower AQ-07 (End User; Hilton).

MEP QA/QC Engineer - Development of The Duhail Internal Security Forces “ISF” camp, the Traffic control center (TCC) Project.

Insuring that the MEP work (Firefighting, Plumbing, HVAC,

Chilled Water, Drainage, Electrical work including low current containment) being done on site is as per method statement, as

well as, the MEP sub-contractors are following the project’s

quality management system.

Reviewing Material receiving inspections raised by subcontractor

And assuring the compliance of material with the material

submittal raised and approved by the consultant.

Issuing & releasing MEP work Inspection and Test Requests to

the consultant and achieving the consultant’s approval upon the work done.

Issuing MEP clearances to the construction team to proceed their

work.

Participating and attending Quality Audits

Page 2: Kareem Ragab CV [3:09]

MEP Site Engineer (Electromechanical Engineer) -Duhail Internal Security Forces “ISF” camp, the Traffic control center (TCC) Project.Executing mechanical, Electrical & plumbing work at site and supervising the MEP

subcontractor while accomplishing the work & installations required on site

St. Raphael Contracting Co., Alexandria, Egypt

Trainee, 7th of July 2013 - 1st of September 2013 Responsible for the SPT piling equipment by following the Maintenance Scheduling, Calibration certificates validity and productivity rates.

Danway for Electrical & Mechanical Construction, Abu Dhabi, UAE

Trainee 24th Jan 2012 – 22nd Feb 2012 Training program for electrical instrumentation & mechanical works in a project i.e: Irrigation Pumping Station with capacity of 208,256m³/day / storage Reservoir of 6.4 MG capacity, and associated Transmission Mains- Installation of surge vessels, for Abu Dhabi Sewerage Company, under the

consultancy of Parsons International Limited in Abu Dhabi, UAE.

The program involved, pumps, 1400mm DI pipes in its all associated types of valves in the pump station, installation of electrical control systems in the MCC Building, also transformers, diesel generators and switch gear in the substation, as per project specification, design, and quality and

safety consciousness. The project manager and the site supervisor whom I was under their supervision, was very concerned to let me go through the submittals including charts and specs as per project. Furthermore, I had to deliver a daily report and a set of questions if available to the project manager to check what exactly I have established and recognized of what is taking place in the project.

Alpha Leo Charity Club, Alexandria, Egypt Charity work, August 2010 – December 2010 Participated in organizing couple of charity events. The first one was called "Ana Mawhub", which was held in the Bibliotheca Alexandrina and attended by a lot of celebrities from Egypt and was later on broadcasted on TV channels. This event was a fund raising event by which talented people with disabilities (mainly Down syndrome) used to perform in front of the audience showing their talents The other one was the Orphans day and it was a fund raising project as well.