Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
K-Series Manual
K4
The Coda Audio K4 is an ultra compact versatile, full range, 2-wayloudspeaker system that features a 5-inch ultra low distortionlow frequency driver and 1-inchcompression driver coupled to a rotatable 90° x 60°elliptical waveguide. The K4 incorporates amulti-design enclosure enabling it to be usedhorizontal, vertical oras a floor monitor.The addition of flyinghardware as standardtogether with the abilityto rotate the ellipticalwaveguide allowsmultipurpose applications.
The Coda Audio K5 is an ultra compact full range 2-way loudspeakersystem that features double 5-inch ultra low distortion conedrivers and a 1-inch compression drivercoupled to a rotatable 90° x 60° ellipticalwaveguide. The addition of M6 flying points asa standard together with the ability to rotatethe elliptical waveguide allows multipurposeapplications.
UCPW12, PW12A
Dimension drawing
CS
Accessoires and Flying hardware drawings
:
ontroller:uitable Subwoofer:
:
AC24
68620
Truss clamp
195/8
Stand fitting
U-bracket
vertical
160.0 mm 82.0 mm
330.0
mm 1
84.0
mm
150°
120°
135°
135°
Type: Ultra compact 2-way full range system
Main Application: Top
Frequency Response: 80Hz – 30kHz (-3dB)
Power Handling (AES): 250W
Program Power: 500W
Peak Power: 1000W
Sensitivity: 94dB
Max SPL peak: 124dB
Dispertion: 90° x 60°
Components:
Low frequency speaker: 2x 5”/ 1.5” VC ultra low distortion
High frequency driver: 1.5” VC driver
Crossover point: 1600Hz passive
Nominal impedance: 16Ω
Input connectors: 2xNeutrik™ NL4MP internal loop
Enclosure: 12/15mm Baltic birch plywood
Net weight: 8kg
Dimmensions: 160 x 480 x 184mm
TECHNICAL SPECIFICATIONS:
Type: Ultra compact 2-way full range system
Main Application: Top and stage monitor
Frequency Response: 80Hz – 30kHz (-3dB)
Power Handling (AES): 125W
Program Power: 250W
Peak Power: 500W
Sensitivity: 92dB
Max SPL peak: 118dB
Dispertion: 90° x 60°
Components:
Low frequency speaker: 5”/ 1.5” VC ultra low distortion
High frequency driver: 1”/1.5” VC driver
Crossover point: 1600Hz passive
Nominal impedance: 16Ω
Input connectors: 2xNeutrik™ NL4MP internal loop
Enclosure: 12mm Baltic birch plywood
Net weight: 6kg
Dimmensions: 160 x 330 x 184mm
TECHNICAL SPECIFICATIONS:
C UCPW12, PW12A
Dimension drawing
CS
Accessoires and Flying hardware drawings
:
ontroller:uitable Subwoofer:
:
A 24
480.0
mm
184.0
mm
160.0 mm 82.0 mm
68620
Truss clamp
195/8
Stand fitting
K5
2
U-bracket
vertical
The CODA Audio K189 is a compact, full range, high output loudspeakersystem that offers both high fidelity and high efficiency for variety ofapplications. The asymmetric profile of theK189/K189Pro permits use as a Front of HouseP.A. System or as a Stage Monitor.
The Coda Audio K289 contains a pair of low frequency 8-inch conedrivers with 2-inch voice coils, and a 1-inch high frequency driver
mounted on a 90° conicalwaveguide. All Pro enclosures include14 M6 mounting suspension points andan air cargo flying track.
:
ontroller:uitable Subwoofer:
:
Dimension drawing
CS
Accessoires and Flying hardware drawings
SPW112, PW118, PW18A
AC24
68620
Truss clamp
250.0 mm
285
mm
480.0
mm
161m
m
135°
105°
120°
PW115, PW118, PW18A
Dimension drawing
CS
Accessoires and Flying hardware drawings
:
ontroller:uitable Subwoofer:
:
AC24S
250.0 mm 120.0 mm
700.0
mm
300.0
mm
155° 155°
120°120°
68620
Truss clamp
K189 K189 Pro/ K289 K289 Pro/
3
U-bracket
vertical
U-bracket
vertical
Type: Ultra compact 2-way full range system
Main Application: Top and stage monitor
Frequency Response: 60Hz – 30kHz (-3dB)
Power Handling (AES): 150W
Program Power: 300W
Peak Power: 600W
Sensitivity: 94.5dB
Max SPL peak: 122dB
Dispertion: 90° conical
Components:
Low frequency speaker: 8”
High frequency driver: 1” driver
Crossover point: 1900Hz
Nominal impedance: 8Ω (K189) / 16Ω (K189Pro)
Input connectors: 2xNeutrik™ NL4MP internal loop
Enclosure: 15mm plywood
Net weight: 11.2kg (K189) / 13kg (K189Pro)
Dimmensions: 250 x 480 x 285mm
TECHNICAL SPECIFICATIONS:
Type: Ultra compact 2-way full range system
Main Application: Top
Frequency Response: 55Hz – 30kHz (-3dB)
Power Handling (AES): 300W
Program Power: 600W
Peak Power: 1200W
Sensitivity: 97.5dB
Max SPL peak: 128dB
Dispertion: 90° conical (289)
Components:
Low frequency speaker: 2x 8”
High frequency driver: 1” driver
Crossover point: 1900Hz
Nominal impedance: 4Ω (K289) / 16Ω (K289Pro)
Input connectors: 2xNeutrik™ NL4MP internal loop
Enclosure: 15mm plywood
Net weight: 17kg (K289) / 18kg (K289Pro)
Dimmensions: 250 x 700 x 300mm
TECHNICAL SPECIFICATIONS:
The Coda Audio K12 is a versatile, full range, two-way loudspeakersystem that features a high power 12-inch neodymium wooferand a 1-inch neodymium compression drivercoupled to an 80° x 60° rotatable ellipticalwaveguide. The K12 incorporates a multi-designenclosure fitted with M6 threaded pointsfor use with an optionalU-bracket andincludes anintegral top hat.
The Coda Audio K15 is a versatile, full range, two-way loudspeakersystem that features a high power 15-inch neodymium wooferand a 1-inch neodymium compression drivercoupled to an 80° x 60° rotatable ellipticalwaveguide.
Type: Compact 2-way full range system
Main Application: Top and stage monitor
Frequency Response: 50Hz – 21kHz (-3dB)
Power Handling (AES): 500W
Peak Power: 2000W
Sensitivity: 99dB
Max SPL peak: 132dB
Dispertion: 80° x 60°
Components:
Low frequency speaker: 15” neodymium woofer
3” (77 mm) VC, 500 W (AES)
High frequency driver: 1” neodymium compression driver
1.75” (44.4 mm) VC, 80 W
Crossover point: 1200Hz Passive
Nominal impedance: 8Ω
Input connectors: 2xNeutrik™ NL4MP internal loop
Enclosure: 15 mm plywood
Net weight: 22kg
Dimmensions: 420 x 690 x 380mm
TECHNICAL SPECIFICATIONS:
Type: Compact 2-way full range system
Main Application: Top and stage monitor
Frequency Response: 60Hz – 21kHz (-3dB)
Power Handling (AES): 500W
Peak Power: 2000W
Sensitivity: 99dB
Max SPL peak: 132dB
Dispertion: 80° x 60°
Components:
Low frequency speaker: 12” neodymium woofer
3” (77 mm) VC, 500 W (AES)
High frequency driver: 1” neodymium compression driver
1.75” (44.4 mm) VC, 80 W
Crossover point: 1200Hz Passive
Nominal impedance: 8Ω
Input connectors: 2xNeutrik™ NL4MP internal loop
Enclosure: 15/18mm plywood
Net weight: 18kg
Dimmensions: 348 x 615 x 320mm
TECHNICAL SPECIFICATIONS:
PW115, PW118, PW18A
:
ontroller:uitable Subwoofer:
:
Dimension drawing
CS
Accessoires and Flying hardware drawings
AC24M
348.0 mm 128.0 mm
320.0
mm
615.0
mm
125°142°
68620
Truss clamp
PW115, PW118, PW18A
Dimension drawing
CS
Accessoires and Flying hardware drawings
:
ontroller:uitable Subwoofer:
:
AC24L
690.0
mm
380.0
mm
420.0 mm 120.0 mm
125° 145°
68620
Truss clamp
K12v2 K15v2
4
U-bracket
vertical
U-bracket
vertical
How to use the AC24 Analog Signal Processor
mode - TOP/SUB
mode - FULL RANGE
full range full range
from
mixer
AC24 Back
MAINS BMS Elektronik-GmbH
Hannover-Germany
230V / 50-60Hz
LEFTRIGHT
BALANCED INPUTSBALANCED OUTPUTS
LEFTRIGHTRIGHTSUB LEFTSUBLIMITERS TRESHOLD
+6 dB
+3 dB
0 dB
SERIAL N:
1.55V
1.16V
0.775V
LIFT GND
power
amp
MASTER VOLUME
0
1
2
3
45
6
7
8
9
10
Left Right
SUB LEVEL / dB
+ 6 dB
0 dB
- 20 dB
MODE
+3dB
0dB
HIGH EQLIMITERSINPUT LEVEL
Left Right
TOP
SUB
AC 24ANALOGUE CONTROLLER
POWER
ON
-3dB
Full Range
Top/Sub
Monitor
-6
0
+6
-3 +3
AC24 Front
mode - MONITOR
stage monitor stage monitor
from
mixer
AC24 Back
MAINS BMS Elektronik-GmbH
Hannover-Germany
230V / 50-60Hz
LEFTRIGHT
BALANCED INPUTSBALANCED OUTPUTS
LEFTRIGHTRIGHTSUB LEFTSUBLIMITERS TRESHOLD
+6 dB
+3 dB
0 dB
SERIAL N:
1.55V
1.16V
0.775V
LIFT GND
power
amp
MASTER VOLUME
0
1
2
3
45
6
7
8
9
10
Left Right
SUB LEVEL / dB
+ 6 dB
0 dB
- 20 dB
MODE
+3dB
0dB
HIGH EQLIMITERSINPUT LEVEL
Left Right
TOP
SUB
AC 24ANALOGUE CONTROLLER
POWER
ON
-3dB
Full Range
Top/Sub
Monitor
-6
0
+6
-3 +3
MODE
Full RangeTop/Sub
Monitor
AC24 Front
In mode the AC24 provides:Stereo subsonic filters, bass EQ, High EQ
for room compensation and limiters.
Full Range In mode the AC24 provides:Stereo subsonic filters, half space compensation
for floor coupling, High EQ and limiters.
Monitor
In mode the AC24 provides:Stereo 24dB Linkwitz-Riley crossovers, subsonicfilters, bass EQ, High EQ for room compensation
and limiters for all four outputs.
Top/Sub
Although the K-Series loudspeakers incorporatededicated passive crossovers ensuring linearfrequency and phase response allowing them towork without additional processing, the use ofthe AC24 processor improves dramatically theoverall system performance offering protectionand frequency response optimization either infull range, stage monitor applications or incombination with subwoofers.
Utilizing different modules the AC24 is preciselymatched to the K-Series models.
power
amp
subwoofer subwoofer
top top
from
mixer
AC24 Back
MAINS BMS Elektronik-GmbH
Hannover-Germany
230V / 50-60Hz
LEFTRIGHT
BALANCED INPUTSBALANCED OUTPUTS
LEFTRIGHTRIGHTSUB LEFTSUBLIMITERS TRESHOLD
+6 dB
+3 dB
0 dB
SERIAL N:
1.55V
1.16V
0.775V
LIFT GND
power
amp
MASTER VOLUME
0
1
2
3
45
6
7
8
9
10
Left Right
SUB LEVEL / dB
+ 6 dB
0 dB
- 20 dB
MODE
+3dB
0dB
HIGH EQLIMITERSINPUT LEVEL
Left Right
TOP
SUB
AC 24ANALOGUE CONTROLLER
POWER
ON
-3dB
Full Range
Top/Sub
Monitor
-6
0
+6
-3 +3
AC24 Front
The AC24 stereo controller contains two inputsand four outputs.
Using the K-Series cabinets together with the AC24controller, the recommended Coda Audiosubwoofers and high quality amplifiers allows youto create systems ideally suited for live bands,clubs, corporate events and Front-of-House applications.
AC24UC
AC24S
AC24M
AC24L
Please use the following modules:
K4, K5:
K189/K189Pro, K289/289Pro:
K12:
K15:
MODE
Full RangeTop/Sub
Monitor
MODE
Full RangeTop/Sub
Monitor
5
How to use the PW12A, PW15A and PW18A – System Subwoofer
ANALOG PROCESSOR
ACTIVE SYSTEM
OUTPUTS
CH A
CH B
BASS
CHANNEL B
CHANNEL A
MONO BASS
PW A
Back of PW12A, PW15A-Pro, PW18A
Applications: Active four point installation system for Bistros, Restaurants,Pubs, Shopping Centers, Convention Centers, Multimedia, Houses of worship,
Conferences or Corporate events
D-core 2.5 install
L-out-Top
R-out-Top
Sub-out
10A
CH A
CH B
BASS
CHANNEL B
CHANNEL A
0
1
2
3
45
6
7
8
9
10 -12dB 0dB-12dB 0dB
-12dB 0dB
PW A
Power-in Power
switch
L-in
R-in
Master volume
)
(turn off beforepower up
R-Volume
Sub-Volume
L-Volume
6
PW12A, PW15A-Pro, PW18A, PW18A-Pro
Active tri-amp system subwoofers with amplifieroutlets for passive tops contain 1.600Wamplification and analogue processor includingcrossovers, limiters, EQ’s etc for a completestereo Sub/Sat system.
System integration: Optimized to work togetherwith the K-series cabinets, the PW-series activesystem subwoofers can be connected to differentmid-high loudspeakers depending on the venuesize, music or visual requirements to build acomplete stereo Sub/Sat system while replacingmultiple 19” audio gear and eliminate the need ofexternal racks.
D-core 2.2 mobile
PW12A PW12
K5 K5
K4 K4
L-out-Top
R-out-Top
Sub-out
Applications: Ultra compact Active PA and stage monitor System for Solo-Entertainer,Duos, Unplugged, mobile DJ
Applications: Ultra compact Active PA-System for Solo-Entertainer,Duos, unplugged, mobile DJ, Corporate events
D-core 2.3 mobile
PW12A PW12
K189 K189
L-out-Top
R-out-Top
Sub-out
Applications: Ultra compact Active PA-Systemfor Rental Companies, Show and Cover bands,optimal dimension to power ratio, fits in a car.
D-core 5.2 mobile
PW15A-Pro
K12 K12
L-out-Top
R-out-Top
Applications: Compact Active PA-Systemfor Rental Companies, Show and Cover bands.
D-core 8.3 mobile
K12 K12
PW18A PW118
L-out-Top
R-out-Top
Sub-out
How to use the PW12A, PW15A and PW18A – System Subwoofer
7
CODA AUDIO
Germany
Boulevard der EU 6
30539 Hannover - Expo Park
phone: +49- 511-86655888fax: +49- 511-86655887www.codaaudio.com