ISO End Suction pumps - Hallmark Rotating Equipmenth ?· CENTRIFUGAL PUMP MANUFACTURERS ISO Horizontal…

  • Published on
    05-Jun-2018

  • View
    212

  • Download
    0

Transcript

  • ISO End Suction pumps

    Pumps for process, fire fighting, chemical and industrial applications

    Water supply Fire fighting

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

  • CENTRIFUGAL PUMP MANUFACTURERS

    ISO Horizontal end-suction pumps to ISO 2858 & ISO 5199 standard

    Design Features Single stage impeller Back pull out design Conforms to ISO 2858 dimensions Single mechanical seal High efficiency hydraulic design Stable head-flow curves for

    parallel operation Shaft, bearing and seal design to

    full requirements of ISO 5199. Rotating element may be removed

    from the pump without disturbing the pipework.

    Low Nett Positive Suction Head protects the pump from cavitation damage.

    Non-overloading power characteristics.

    Operating range Discharge flange sizes 32 to 200 mm Maximum flowrate 250 l/sec Max generated head 160 m at 2900 rpm

    Applications

    Chemical, refinery and process

    Building services

    Industrial cooling, heating and circulation

    Municipal water boosting and transfer

    Cooling water supply

    General industrial services

    Operating pressure Cast iron pumps are capable of a working

    pressure of 16 bar With higher rated flanges, cast steel and

    stainless steel pumps can be supplied

    for working pressures up to 25 bar.

    All pumps are hydrostatically tested upon

    assembly to 1.5 times the rated working

    pressure.

    Mechanical seal Virtually any make and type of single, double or

    cartridge seal may be fitted to the ISO pump.

    Drivers Pumps are generally supplied complete with a 3 phase electric motor IP55, TEFC (fan cooled), Class F, Temp. rise class B 380-415V, 50Hz. or driven by Diesel Engine available upon request.

    Materials Hallmark carry stocks of finished components

    in cast iron and stainless steel. Many other materials can be cast to order including:

    Stainless steel Cast bronze Cast steel Cast or Ductile iron

    Further information

    For further information on any product,

    please contact the Hallmark sales office:

    Tel: 001-813-334-5994

    Fax: 001-727-595-5272

    Email:sales@hallmarkrotatingequip.com

    Max temperature 150 deg C

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

    Model Designation

    ISO 250x200-400

    Nominal diameter of impeller (mm)

    Diameter of outlet (mm)

    Diameter of inlet (mm)

    Pump type

  • 4 pole 1450 rpm

    ME

    TR

    ES

    6

    1 1.2

    10

    12

    8

    20

    15

    120

    50

    30

    40

    60

    70

    80

    100

    25

    20

    1.5

    5 6 87

    2 2.5

    10

    3

    12 15

    4 5 12

    3025

    6 7 8 10

    40 50 60

    15

    70

    20

    80 400200

    30

    100 120 150

    40 50 8060

    250

    70

    300

    100 250

    M3/HR

    L/SEC

    600500

    120 150 200

    800

    300

    10004

    50x32-160

    50x32-200

    65x40-200

    65x40-250

    65x40-315

    80x65-160

    80x50-200

    80x50-250

    25

    80x50-315

    100x65-200

    100x65-250

    100x65-315

    125x100-200

    125x100-250

    125x100-315

    125x80-400 125x100-400

    150x125-250

    150x125-315

    150x125-400200x150-400

    250x200-315

    250x200-400

    125x100-500

    200x150-500

    15

    504

    8

    1

    10

    12

    15

    25

    20

    30

    40

    50

    60

    70

    4

    15

    21.51.2

    5 6 7

    32.5

    108 12

    765

    20 25

    108 12

    30 40

    80

    100

    120

    200 L/SEC

    200100

    20 25

    7060 80

    504030

    120 150

    1007060 80

    250 300

    150120

    500400 600

    300250

    1000

    M3/HR

    800

    150

    200

    50x32-160

    50x32-20065x40-200

    65x40-250

    80x65-160

    80x50-200

    80x50-250

    100x65-200

    100x65-250

    125x100-200

    125x100-250

    65x40-315 80x50-315 100x65-315 125x100-315

    2 pole 2900 rpm

    ME

    TR

    ES

    ISO range charts 50hz

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

  • Typical cross section: Bareshaft ISO pumps

    Ref Item Build code C Build code B Build code D Build code G Build code M Build code 6

    1 Volute casing Cast iron Cast iron Ductile iron Cast iron Cast iron 316 SS

    2 Impeller Cast iron LG4 Bronze LG4 Bronze Cast iron 316 SS 316 SS

    3 Shaft 420 SS 420 SS 420 SS 420 SS 420 SS 316 SS

    4 Backcover Cast iron Cast iron Cast iron Cast iron Cast iron 316 SS

    6 Bearing housing Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron

    7 Mechanical Seal As specified As specified As specified As specified As specified As specified

    8 Impeller nut Steel LG4 Bronze LG4 Bronze Steel 316 SS 316 SS

    8.1 Impeller nut washer Steel Bronze Bronze Steel 316 SS 316 SS

    11 Support foot Steel Steel Steel Steel Steel Steel

    12.1 Casing wear ring Cast iron Cast iron Cast iron LG4 Bronze Cast iron 316 SS

    12.2 Backcover wear ring Cast iron Cast iron Cast iron LG4 Bronze Cast iron 316 SS

    13.1 Impeller key Key steel Key steel Key steel Key steel 316 SS 316 SS

    13.2 Coupling key Key steel Key steel Key steel Key steel Key steel Key steel

    41.1 Inboard Roller bearing Steel Steel Steel Steel Steel Steel

    41.2 Double angular contact brg Steel Steel Steel Steel Steel Steel

    42 Bearing cover Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron

    45 Locknut Steel Steel Steel Steel Steel Steel

    45.1 Lockwasher Steel Steel Steel Steel Steel Steel

    46.1 Inboard Lipseal Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber

    46.2 Outboard lipseal Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber

    48 Flinger Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber

    49 Grease nipple Steel Steel Steel Steel Steel Steel

    61.1 Casing o-ring Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber

    61.2 End cover o-ring Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber Nitrile rubber

    F1 Casing bolts Steel Steel Steel Steel Steel Steel

    F2 End cover bolts Steel Steel Steel Steel Steel Steel

    F3 Support foot bolts Steel Steel Steel Steel Steel Steel

    P1 Casing vent plug Steel Steel Steel Steel Steel 316 SS

    P2 Suction gauge plug Steel Steel Steel Steel Steel 316 SS

    P3 Casing drain plug Steel Steel Steel Steel Steel 316 SS

    F1

    01

    12.2

    02

    12.1

    13.1

    P2

    08.1

    P3

    07 42 41.1 06 03 50 41.2 45.1 13.2

    49 46.1 11 F3 46.2

    08

    P1

    04

    45

    F2

    48 61.261.1

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

  • Impeller and bearing housing data

    Pump Shaft Shaft diameters Bearing type Impeller data

    size group Seal Bearings Coupling Inboard Outboard No of Eye dia Width Max M of I

    A B C vanes mm W solids mm Kgm2

    50x32-160 1 32 35 24 N307E 7307B 6 60 7 3 0.011

    50x32-200 1 32 35 24 N307E 7307B 5 60 5 2 0.025

    65x50-160 1 32 35 24 N307E 7307B 6 80 8.5 4 0.013

    65x40-200 1 32 35 24 N307E 7307B 6 70 8.5 4 0.022

    65x40-250 2 43 45 32 N309E 7309B 5 85 7 0 0.067

    65x40-315 2 43 45 32 N309E 7309B 5 75 6 2.5 0.124

    80x65-160 1 32 35 24 N307E 7307B 5 90 16.5 8 0.014

    80x50-200 1 32 35 24 N307E 7307B 6 90 11 5 0.02

    80x50-250 2 43 45 32 N309E 7309B 6 85 9 4 0.056

    80x50-315 2 43 45 32 N309E 7309B 5 90 7 3 0.189

    100x80-160 2 43 45 32 N309E 7309B 6 115 24 11.5 0

    100x65-200 2 43 45 32 N309E 7309B 6 110 17.5 8.5 0.037

    100x65-250 2 43 45 32 N309E 7309B 6 110 11.5 5.5 0.078

    100x65-315 3 53 55 42 N311E 7311B 6 125 12.5 6 0.145

    125x80-400 3 53 55 42 N311E 7311B 5 155 10 0 0

    125x100-200 2 53 45 32 N309E 7309B 6 130 29 14 0.039

    125x100-250 3 53 55 42 N311E 7311B 6 140 23 11 0.1

    125x100-315 3 53 55 42 N311E 7311B 6 135 16.5 8 0.202

    125x100-400 3 53 55 42 N311E 7311B 5 140 17 8 0.404

    125x100-500 4 60 65 48 N313E 7313B 5 140 14 0 1.325

    150x125-250 3 53 55 42 N311E 7311B 6 155 40 0 0.113

    150x125-315 3 53 55 42 N311E 7311B 6 155 18 0 0.215

    150x125-400 3 53 55 42 N311E 7311B 6 170 22 10.5 0.528

    150x125-500 4 60 65 48 N313E 7313B 5 165 23 11 1.35

    200x150-315 4 60 65 48 N313E 7313B 5 195 55 0 0.268

    200x150-400 4 60 65 48 N313E 7313B 6 195 45 0 0.611

    200x150-500 4 60 65 48 N313E 7313B 6 195 30 0 1.357

    250x200-315 4 60 65 48 N313E 7313B 6 220 0 0.322

    250x200-400 4 60 65 48 N313E 7313B 5 220 65 0 0

    A B

    Eye D

    iam

    ete

    r

    C

    Inboard bearing Outboard bearing

    W

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

  • T E C H N I C A L S P E C I F I C AT I O N S

    ISO Material Specifications

    STANDARD CONSTRUCTIONComponent Standard Australian British ASTM

    Fitted Pump Standard Standard Standard

    Casing Cast iron GG25 AS1830/T260 BS1452 - Gr260 A48-Class 35

    Back Plate Cast iron GG25 AS1830/T260 BS1452 - Gr260 A48-Class 35

    Bearing Housing Cast iron GG20 AS1830/T220 BS1452 - Gr220 A48-Class 30

    Casing Wear Ring Bronze AS1565/836 BS1400 LG2 B584-C83600

    Impeller Bronze AS1565/836 BS1400 LG2 B584-C83600

    Impeller Key Stainless steel 420 AS1444/420 BS970 - Gr420-S37 A276 - type 420

    Impeller Lock Nut Stainless steel 420 AS1444/420 BS970 - Gr420-S37 A276 - type 420

    Shaft Stainless steel 420 AS1444/420 BS970 - Gr420-S37 A276 - type 420

    OPTIONAL MATERIAL CONSTRUCTIONComponent Optional Australian British ASTM

    Materials Standard Standard Standard

    Casing Ductile iron AS 1831/400 BS2789-Gr500/7 A536-84 70-50-05Stainless steel 316 AS 2074/H6B BS1504-Gr316 A351-CF-8MStainless steel 2205

    Back Plate Ductile iron AS 1831 BS2789-Gr500/7 A536-84 70-50-05Stainless steel 316 AS 2074/H6B BS1504-Gr316 A351-CF-8MStainless steel 2205

    Casing Wear Ring Stainless steel 316 AS 2074/H6B BS1504-Gr316 A351-CF-8M

    Impeller Stainless steel 316 AS 2074/H6B BS1504-Gr316 A351-CF-8M

    Shaft Stainless steel 316 AS 1444/316 BS970-Gr316-S16 A276 type 316Stainless steel 2205

    Other materials available upon request, please contact Hallmark.

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

  • ISO bareshaft pump dimensions

    N4

    M2

    M1

    W

    Fa

    N3

    N1

    B

    D

    S2

    N2

    H1

    H2

    H0

    L

    Hf

    S1

    Pump Shaft Flanges Outline Dimensions Foot Dims Bolt Holes Rear Support Foot Shaft

    size group IN OUT a F H1 H2 N1 N2 M1 M2 B H0 S1 S2 W Hf N3 N4 D L kg

    50x32-160 1 50 32 80 385 132 160 240 190 100 70 50 12 14 14 285 5 140 110 24 50 38

    50x32-200 1 50 32 80 385 160 180 240 190 100 70 50 12 14 14 285 5 140 110 24 50 46

    65x50-160 1 65 50 80 385 132 160 240 190 100 70 50 12 14 14 285 5 140 110 24 50 40

    65x40-200 1 65 40 100 385 160 180 265 212 100 70 50 12 14 14 285 5 140 110 24 50 48

    65x40-250 2 65 40 100 500 180 225 320 250 125 95 65 16 14 14 370 5 140 110 32 80 70

    65x40-315 2 65 40 125 500 200 250 345 280 125 95 65 16 14 14 370 5 140 110 32 80 80

    80x65-160 1 80 65 100 385 160 180 265 212 100 70 50 12 14 14 285 5 140 110 24 50 46

    80x50-200 1 80 50 100 385 160 200 265 212 100 70 50 12 14 14 285 5 140 110 24 50 52

    80x50-250 2 80 50 125 500 180 225 320 250 125 95 65 16 14 14 370 5 140 110 32 80 72

    80x50-315 2 80 50 125 500 225 280 345 280 125 95 65 16 14 14 370 5 140 110 32 80 87

    100x80-160 2 100 80 100 500 160 200 280 212 125 95 65 16 14 14 370 5 140 110 32 80 68

    100x65-200 2 100 65 100 500 180 225 320 250 125 95 65 16 14 14 370 5 140 110 32 80 70

    100x65-250 2 100 65 125 500 200 250 360 280 160 120 80 16 20 14 370 5 140 110 32 80 80

    100x65-315 3 100 65 125 530 225 280 400 315 160 120 80 20 20 14 370 5 140 110 42 110 118

    125x80-400 3 125 80 125 530 280 355 435 355 160 120 80 20 20 14 370 5 140 110 42 110 165

    125x100-200 2 125 100 125 500 200 280 360 280 160 120 80 16 20 14 370 5 140 110 32 80 85

    125x100-250 3 125 100 140 530 225 280 400 315 160 120 80 20 20 14 370 5 140 110 42 110 126

    125x100-315 3 125 100 140 530 250 315 400 315 160 120 80 20 20 14 370 5 140 110 42 110 135

    125x100-400 3 125 100 140 530 280 355 500 400 200 150 100 20 24 14 370 5 140 110 42 110 175

    125x100-500 4 125 100 160 670 355 450 550 450 200 150 80 25 24 20 500 10 170 140 48 110 313

    150x125-250 3 150 125 140 530 250 355 400 315 160 120 80 20 20 14 370 5 140 110 42 110 140

    150x125-315 3 150 125 140 530 280 355 500 400 200 150 100 20 24 14 370 5 140 110 42 110 150

    150x125-400 3 150 125 140 530 315 400 500 400 200 150 100 20 24 14 370 5 140 110 42 110 186

    150x125-500 4 150 125 160 670 355 450 550 450 200 150 100 25 24 20 500 10 170 140 48 110 336

    200x150-315 4 200 150 160 670 315 400 550 450 200 150 100 25 24 20 500 10 170 140 48 110 222

    200x150-400 4 200 150 160 670 315 450 550 450 200 150 100 25 24 20 500 10 170 140 48 110 300

    200x150-500 4 200 150 160 670 400 500 550 450 200 150 100 25 24 20 500 10 170 140 48 110 382

    250x200-315 4 250 200 180 670 315 450 550 450 200 150 100 25 24 20 500 10 170 140 48 110 277

    250x200-400 4 250 200 180 670 355 500 550 450 200 150 100 25 24 20 500 10 170 140 48 110 340

    206 Gulf Blvd. Unit F E-mail: Sales@hallmarkrotatingequip.com Tel.: 001-813-334-5994 Indian Rocks Beach, FL 33785 USA Website: www.hallmarkrotatingequip.com Fax: 001-727-595-5272

  • C E N T R IF U G A L P U M P S

    206 Gulf Blvd. Unit F Indian Rocks Beach, FL 33785 USA

    Tel.: 001-813-334-5994

    Fax: 001-727-5955272

    E-mail: Sales@hallmarkrotatingequip.com

    Website: www.hallmarkrotatingequip.com

    Distributed By:

    Page 1Page 2Page 4Page 5Page 6Page 53Trang cuoi.pdfBia cuoi Hallmark.pdfPage 1

Recommended

View more >