automatic spray guns, recovery systems, and the Vortgech multi- cyclone booth. Short-wave infra- red ovens for curing liquid, pow- der, and various coatings will also be on display. Circle 693 on the reader service card

Industrial Heating & Finishing Co., Booth 909 Pelham, Ala.

Industrial Heating & Finishing will provide information on finish- ing system equipment such as pretreatment washes, dry off and cure ovens, gas or electric infra- red ovens, environmental rooms, spraybooths, conveyor systems, and electrocoat systems. Circle 694 on the reader service card

Infra-Red Technologies Inc., Booth 707 Kansas City, MO.

Infra-Red Technologies will show infrared heaters and conveyors. Circle 695 on the reader service card

Innotek Powder Coatings LLC, Booth 117 Big Spring, Texas

Circle 696 on the reader service card

Innotek will display Polyarmor, a multipurpose thermoplastic in- dustrial finish designed for maxi- mum mechanical performance, high-impact resistance, and ulti- mate UV protection. Available in fluid bed and electrostatic grades, Polyarmor powder coatings are the best choice for outdoor furni- ture, wire products, and other tough applications where you need ultimate protection from a great looking coating. Polyarmor coatings require no cure times and are PVC free.

Look no further for the best continuous flour frnlshlng systems.

Set your sights on a RGsler system.The global standard

for environmentally-friendly, low-cost surface finishing.

Rotomatlc Llneemetrc High power and a spiral design Advanced technology and for minimal space requirements. Flo-Thru design for medium to A component-to-media ratio large pieces. Reduced energy that saves costs by lower media requirements result in cost consumption. savings and economy.

As the world leader, RGsler systems are unmatched. From mass

finishing to shot blasting, from consumables to relining and service,

Rejsler can tailor a total solution to fit your exact requirements.

RC%LER finding a beffer way . . .

RGsler Metal Finishing USA L.L.C.

1551 Denso Road * Battle Creek, MI 49015

Tel: 616-441-3000 - www.roesler-surfacefinish.com

Circle 054 on reader card or go to www.thru.to/webconnect

Innovative Industries, Booth 1211 Cleveland

Innovative Industries will show

International Thermal Systems

electric infrared paint/powder curing systems, and the new patent-pending Laboratory Q- Panel Wet/Dry Paint Curing Sim- ulator and Pilot Wet/Dry Paint Curing System. Circle 697 on the reader service card

International Thermal Systems LLC, Booth 601 Milwaukee, Wis.

will show finishing systems, wash- ers, material-handling equipment, wastewater treatment, and water pretreatment. Circle 698 on the reader service card

Interpon Powder Coatings, Div. of Akzo-Nobel Coatings, Booth 1341 Houston

Highlighted will be Particle Man- agement Technology. This pat- ented manufacturing method that allows the supply of powders that

October 2001 29

have significantly different and equipment, including HVLP and improved handling and applica- air-assisted airless automatic and tion characteristics. manual equipment. Circle 699 on the reader service card Circle 701 on the reader service card

Iontech, Booth 833 Cincinnati

Powder booths and guns will be on display along with a new line of Iontech-Walther liquid spray equipment, including HVLP and air-assisted airless automatic and manual equipment. Circle 700 on the reader service card

Iontech Walther, Booth 933 Cincinnati

Powder booths and guns will be on display along with a new line of Iontech-Walther liquid spray

JBI Custom Equipment for Finishing Systems, Booth 1849 Osseo, Wis.

JBI will be showing paint and powder booths, dust booths, batch, burn-off and high-produc- tion ovens, parts washers, and pretreatment systems. Circle 702 on the reader service card

Jacob Tubing L.P., Booth 352 Memphis, Tenn.

Jacob Tubing will be offering modular cast iron tubes, fittings, and valves. Circle 703 on the reader service card

KM1 Systems Inc., Booth 2141 Crystal Lake, Ill.

KM1 Systems offers complete turnkey systems for painting and porcelain enamel, including pre- treatment washers, electrocoat, ovens, spraybooths, powder booths, sludge removal, and fur- naces. Circle 704 on the reader service card

Kemutec Group Inc., Booth 2000 Briston, Pa.

Kemutec has designed a special Kek Minisifter for use in Power Paint Spray Booth Recovery Sys- tems. This new design sifter will be launched at Coating 2001. Uti- lizing the “Cantilever Shaft” prin- ciple, the new design of Kek Mi- nisifter will allow sieving of the

SIMPLE - Automatic Gage Setup and two-button operation ‘, allow you to take basic measurements or perform advanced functions easily. Now with a larger, easier to read LCD and menu-driven user interface.

DURABLE - Tough Probes, Robust Housing, Strong Warranty... the PosiTector 6000 is made to measure in rugged environments. Unaffected by vibration, this heavy-duty gage also resists exposur to solvents, acids, oil, water and dust.

ACCURATE - Measuring with High Resolution and Accuracy, each quality-tested PosiTector 6000 gage leaves our facility with a Certificate of Calibration providing traceability to NIST.

Learn about the upgraded PosiTector at l-800-448-3835 or www.defelsko.com

CORPORATION

Built-in Pro kbe

Circle 020 on reader card or go to www.thru.to/webconnect

October 2001