External Coating ChartExternal Finishes & Colours

Insulated Panel Envelope Systems—Roof Wall Façades Fabrications

02 External Coating Colour Chart

Introducing Kingspan's Colours

Kingspan provides a large selection of external finishes and colours for its Standing Seam System, Insulated Roof & Wall Panels and Fabrications, allowing building owners’ and architects the ultimate flexibility in designing their building. With a wide variety of finishes including metallic, matt, solid and gloss, Kingspan’s offer is suitable for the following building types:

– Community & Amenity;– Education;– Health;– Hotels & Leisure;– Industrial;– Airports & Infrastructure;– Offices;– Private Housing;– Retail;– Social Housing; and– Utilities.

Kingspan Insulated Panels 03

04 External Coating Colour Chart

Note: The above colours are our standard colours, other colours are available as needed.

Kingspan's Standard Colours

BeigeRAL 1014

BlueRAL 5012

BeigeRAL 1001

BlueRAL 5015

GreenRAL 6005

GreenRAL 6021

WhiteRAL 9002

SilverRAL 9006

AluminiumRAL 9007

WhiteRAL 9003

WhiteRAL 9010

GreenRAL 6013

Traffic Red RAL 3020

WhiteRAL 9016

Signal Yellow RAL 1003

Oyster WhiteRAL 1013

Light IvoryRAL 1015

GreyRAL 7035

CreamRAL 9001

Paint System: Polyester / PVDF / Spectrum

Kingspan Insulated Panels 05

Determination of Thermal Properties:– Total Solar Reflectance (according to ASTM E903-01)– Thermal Emissivity (according to ASTM C1 371-04a)– Solar Reflectance Index (according to ASTM E1980-0 1)Solar Reflectance Index (SRI) is determined according to ASTM E1980-01. This method uses the measured TSR (according to ASTM E1903-01) and measured thermal emittance (according to ASTM C1371-04a). SRI gives an estimation of the steady state surface temperature and is quoted at three different convective coefficients (hc) at high (6-10ms-1), medium (2-6 m.s-1) and low (0-2m.s-1) wind speeds. A value of 100 is considered to be the reference white surface and a value of 0 the reference black surface.

SRI ValuesColour Name Colour Code UV Range Visible Range NIR Range Total Solar Thermal SRI hc=12 (300-395) (400-720) (720-2500) Reflectance Emittance (W.m-2.K-1)

White RAL 9003 11,9% 65,2% 58,8% 60,2% 0,81 70

White RAL 9016 13,1% 84,4% 76,4% 78,0% 0,83 95

White RAL 9002 11,9% 65,2% 58,8% 60,2% 0,81 70

White RAL 9010 12,9% 78,0% 75,9% 75,1% 0,86 92

Cream RAL 9001 13% 75% 75% 73% 0,82 89

Oyster White RAL 1013 10% 69% 69% 67% 0,84 80

Light Ivory RAL 1014 11% 69% 69% 67% 0,84 75

Beige RAL 1014 10,4% 51,8% 67,9% 59,6% 0,86 70

Beige RAL 1001 9,7% 45,6% 51,0% 47,6% 0,84 53

Grey RAL 7035 11,1% 44,0% 44,8% 43,5% 0,84 48

Silver RAL 9006 48,7% 44,7% 46,3% 50,7% 0,74 51

Aluminium RAL 9007 69,6% 77,7% 85,0% 81,5% 0,04 81

Signal Yellow RAL 1003 6% 48% 73% 61% 0,86 71

Green RAL 6021 9,6% 27,4% 49,7% 39,3% 0,84 42

Green RAL 6013 9,3% 29,5% 51,2% 41,0% 0,86 45

Green RAL 6005 5,8% 6,9% 33,4% 21,6% 0,84 18

Blue RAL 5012 10,1% 23,8% 59,4% 43,2% 0,84 47

Blue RAL 5015 9,70% 22,50% 56,3% 40,90% 0,86 45

Traffic Red RAL 3020 7% 11% 35% 24% 0,86 22

06 External Coating Colour Chart

SRI Values - PVDFSr.No Color Name Color code UV Range

(300-395)Visible Range (400-720)

NIR Range (400-720)

Total Solar Reflectance

Thermal Emittance

SRI hc=12 (W.m-2.K-1)

1 White RAL9001 13% 75% 75% 73% 0,82 89

2 White RAL9002 10% 65% 61% 61% 0,84 72

3 White RAL9010 10% 84% 80% 80% 0,84 95

4 White RAL9016 10% 84% 80% 79,6% 0,84 96

5 Beige RAL1001 9% 23% 46% 39% 0,86 38

6 Oyster White RAL1013 10% 69% 69% 67% 0,84 80

7 Ivory RAL1014 11% 55% 61% 57% 0,82 65

8 Light Grey RAL7035 10% 53% 48% 49% 0,85 55

9 Silver RAL9006 36% 46% 49% 47% 0,67 46

10 GreySilver RAL9007 24% 29% 36% 33% 0,72 28

11 Moss Green RAL6005 6% 8% 13% 11% 0,86 5

12 Reed Green RAL6013 8% 19% 24% 22% 0,84 18

13 Pale Green RAL6021 10% 32% 54% 44% 0,82 47

14 Light Blue RAL5012 13% 30% 41% 36% 0,85 37

15 Sky Blue RAL5015 8% 19% 41% 31% 0,87 32

SRI Values - PESr.No Color Name Color code UV Range

(300-395)Visible Range (400-720)

NIR Range (400-720)

Total Solar Reflectance

Thermal Emittance

SRI hc=12 (W.m-2.K-1)

1 White RAL9001 10% 76% 68% 69% 0,86 82

2 Signal Yellow RAL1003 6% 48% 73% 61% 0,86 71

3 Oyster White RAL1013 10% 69% 69% 67% 0,84 80

4 Ivory RAL1014 11% 57% 71% 63% 0,86 75

5 Traffic Red RAL3020 7% 11% 35% 24% 0,86 22

Kingspan's Standard Colours

Kingspan Insulated Panels 07

Kingspan's Colours

Kingspan uses prepainted coloured metals in the manufacture of its insulated panel products and ancillaries such as flashings/trims.We offer a wide range of coatings with various designs and technical properties that are available for:

External Applications Internal Applications

– Prepainted coloured metals are generally referred to by their top coat (e.g. PVC, PU, PVDF) and can have different textures (e.g. leathergrain, smooth, high-gloss).

– Interior and exterior prepainted metal facings are key to defining an insulated panel’s performance, durability and appearance.

Special Applications

08 External Coating Colour Chart

Kingspan Coatings Key Benefits

Excellent corrosion resistance from scratches and on cut edges through use of innovative metal

alloy substrates.

Advanced colour stability and UV resistance thanks to state-of-

the-art paint technology.

Environmentally safe, fully recyclable coatings.

Maintenance-free, not requiring any special maintenance regime

retaining their performance during their lifetime.

Meeting the needs of every application through choice of specifications and guarantees.

Comprehensive guarantee against corrosion, chemical

attack, UV rays, humidity and abrasion for up to 40 years.

Kingspan Insulated Panels 09

Kingspan Coatings Metal Coil Coating Process

Decoiler

Entrance accumulator

Pre-treatment (cleaning and

conversion coating)

Top coater

Finish oven

Water quench

Cut-off

Recoiler

Dryer

Prime coater

Curing oven

Exit accumulator

Prepainted coloured metals are manufactured under strict quality control. All our suppliers have achieved ISO 9001; most also hold ISO 14001 and OHSAS 18001

Steel and aluminium are the most common metal substrates for prepainting.

010 External Coating Colour Chart

Kingspan Coatings Kingspan Spectrum

Applications– Ideal for wall applications, especially where a smooth texture is required.– Not widely used on roofs.– Increasing use in applications where durability is important.

PU coating

Back coat

PrimerPre-treatment

Pre-treatment

Metallic protectionMetal substrateMetallic protection

Smooth 55μm thick PU coating in Solid, Metallic and Diamond finishes

High-build material for applications

where durability is important

Good corrosion protection of the metal substrate (700 hours salt

spray test)

High level of temperature

resistance (80°C for Spectrum Solid

and Metallic)

Guaranteed for 20-40 years depending on location of the

building

Kingspan Insulated Panels 011

Kingspan Coatings Kingspan PVDF

Applications– High-end residential, institutional and commercial applications– Recommended exclusively for external wall cladding and façades

Top coat

Pre-treatmentBack coat

Base coat

Primer

Metallic protection

Pre-treatmentMetallic protection

Metal substrate

Smooth, high-gloss 25-55μm

thermoplastic PVDF coating

Multi-layered coating structure –

consists of up to 4 layers of paint

Hardly affected by UV radiation – richness of bright

colours & two-tone finishes

High levels of resistance to acids,

solvents, bases and heat

Guaranteed for 20-40 years

depending on location of the

building

012 External Coating Colour Chart

Kingspan Coatings CLEANsafe 15

Basic 15μm polyester coating

Efficient and durable internal lining system

Non-toxic and easy to clean

Moderate robustness, chemical and

humidity corrosion resistance

Applications– Widely used as a basic coating for low-risk areas or as a basic internal coating.

Back coat

Top coatPre-treatment

Pre-treatment

Metallic ProtectionMetal substrateMetallic Protection

Kingspan Insulated Panels 013

Kingspan Coatings CLEANsafe 25

Standard 25μm polyester coating

Food safety – suitable for surfaces immediately behind food preparation,

processing surfaces or equipment

Non-toxic and easy to clean

Good robustness, chemical and

humidity corrosion resistance

Applications– Suitable for humid and chemically aggressive internal environments.

Back coat

Top coat

Metallic ProtectionMetal substrate

Primer

Pre-treatment

Pre-treatment

Metallic Protection

For the product offering in other markets please contact your local sales representative or visit www.kingspanpanels.com Care has been taken to ensure that the contents of this publication are accurate, but Kingspan Limited and its subsidiary companies do not accept responsibility for errors or for information that is found to be misleading. Suggestions for, or description of, the end use or application of products or methods of working are for information only and Kingspan Limited and its subsidiaries accept no liability in respect thereof.

www.kingspan.com