Embed Size (px)
Citation preview
MIAL INSTRUMENTS MAF 900
TECHNICAL PARAMETERS
SPECIFICATION
MAF 900
MIAL INSTRUMENTS MAF 900
MAIN CONSTRUCTIONS AND DIMENSIONS
Every meassuring instrument includes meassuring tube and sensing indicator.
1. Flange2. Tube Body3. Fasten and Enclosed Circle4. Floater stope Shaft5. Orifice hole or Cone tube6. Floater leader Panel7. Floater8. Indicator9. Signal Line connection10. PTFE (Tefelon)
MIAL INSTRUMENTS MAF 900
M10 INDICATOR
ELECTRICITY REMOTE TRANSMIT PERFORMANCE AND WIRING DIAGRAM
DIMENSIONS MAGNETISM FILTER
MIAL INSTRUMENTS MAF 900
KEEP WARM
RESTRICT SWITCH
One or two location limited switch can be installed in the indication, when the flow arrives at the limited value, the alarm switch will send you the alarm value. The flow control figure was set when alarm switch was made. The customer can also open the cover of M10 indicator and set up corresponding position of K1 or K2. SC3.5 limit location switch should use together with the transistor amplifier (WE 77/EX1.2 order alone) in order to fix the explosion proof type. SC 3.5 no limit location switch is common direct type, power supply of 24VDC, three wire direct export about 23.5 V electric signal to the PLC regulating system.
MIAL INSTRUMENTS856/ 6 GIDC Makarpura, Vadodara 390010
Gujarat, India +91 2652645869/2652645870
www.mialinstruments.com Email : [email protected]
