Embed Size (px)
For a full and complete Guide for Authors, please go to: http://www.elsevier.com/locate/apcatbApplied Catalysis B: Environmental has no page charges
Publication information. Applied Catalysis B: Environmental (ISSN 0926-3373). For 2014 volumes 144–161 are scheduled for publication. Subscrip tion prices are available upon request from the Publisher or from the Elsevier Customer Service Department nearest you or from this journal’swebsite (http://www.elsevier.com/locate/apcatb). Further information is available on this journal and other Elsevier products through Elsevier’swebsite: (http://www.elsevier.com). Subscriptions are accepted on a prepaid basis only and are entered on a calendar year basis. Issues are sent by standard mail (surface within Europe, air delivery outside Europe). Priority rates are available upon request. Claims for missing issues should be made within six months of the date of dispatch.
Orders, claims, and journal enquiries: please contact the Elsevier Customer Service Department nearest you:St. Louis: Elsevier Customer Service Department, 3251 Riverport Lane, Maryland Heights, MO 63043, USA; phone: (877) 8397126 [toll free within the USA]; (+1) (314) 4478878 [outside the USA]; fax: (+1) (314) 4478077; e-mail: [email protected] Oxford: Elsevier Customer Service Department, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK; phone: (+44) (1865) 843434; fax: (+44) (1865) 843970; e-mail: [email protected] Tokyo: Elsevier Customer Service Department, 4F Higashi-Azabu, 1-Chome Bldg, 1-9-15 Higashi-Azabu, Minato-ku, Tokyo 106-0044, Japan; phone: (+81) (3) 5561 5037; fax: (+81) (3) 5561 5047; e-mail: [email protected] Singapore: Elsevier Customer Service Department, 3 Killiney Road, #08-01 Winsland House I, Singapore 239519; phone: (+65) 63490222; fax: (+65) 67331510; e-mail: [email protected]
Advertising information: If you are interested in advertising or other commercial opportunities please e-mail [email protected] and your enquiry will be passed to the correct person who will respond to you within 48 hours
Manuscript submission: It is essential to give an e-mail address when submitting a manuscript. Articles must be written in good English. Should Authors be requested by the Editor to revise the text, the revised version should be submitted within 3 months. After this period the article will be regarded as a new submission.Manuscripts may be submitted to one of the appropriate Editors. Please submit, with the manuscript, a graphical abstract and the names and contact details of three potential Referees.
Contributions from Europe, Russia and Africa:– Prof. X. Verykios, Dept. of Chemical Engineering, University of Patras, GR 26504 Patras, Greece; Fax: (+30-2) 610991527; E-mail: [email protected]
Contributions from Asia and Australia:– Prof. I.-S. Nam, Department of Chemical Engineering, Pohang Univ. of Science & Technology, Hyoja San 31 Nam-gu, Pohang, Republic of Korea; E-mail: [email protected]
Contributions from The Americas:– Prof. M. Flytzani-Stephanopoulos, Department of Chemical and Biological Engineering, Tufts University, 4 Colby Street, Medford MA 02155, USA; Fax: (+1) (617) 627 3991; E-mail: mfl [email protected]
Online submission is strongly encouraged to speed up the reviewing and publication process. Authors can upload their article as a LaTeX, Microsoft® (MS) Word®, WordPerfect®, PostScript or Adobe®, Acrobat® PDF document via Acrobat® PDF document via the online submission system (http://ees.elsevier.com/apcatb). The system generates an Adobe Acrobat PDF version of the article which is used for the reviewing process. Authors, Reviewers and Editors send and receive all correspondence by e-mail.
Language (Usage and Editing services). Please write your text in good English (American or British usage is accepted, but not a mixture of these). Authors who feel their English language manuscript may require editing to eliminate possible grammatical or spelling errors and to conform to correct scientifi c English may wish to use the English Language Editing service available from Elsevier’s WebShop http://webshop.elsevier.com/languageediting/ or visit our customer support site http://support.elsevier.com for more information.
Illustration services. Elsevier’s WebShop (http://webshop.elsevier.com/illustrationservices) offers Illustration Services to authors preparing to submit a manuscript but concerned about the quality of the images accompanying their article. Elsevier’s expert illustrators can produce scientifi c, technical and medical-style images, as well as a full range of charts, tables and graphs. Image ‘polishing’ is also available, where our illustrators take your image(s) and improve them to a professional standard. Please visit the website to fi nd out more.
Author enquiries. For enquiries relating to the submission of articles (including electronic submission) please visit this journal’s homepage at http://www.elsevier.com/locate/apcatb. For detailed instructions on the preparation of electronic artwork, please visit http://www.elsevier.com/artworkinstructions. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher. You can track accepted articles at http://www.elsevier.com/trackarticle. You can also check our Author FAQs at http://www.elsevier.com/authorFAQ and/or contact Customer Support via http://support.elsevier.com.
The corresponding author, at no cost, will be provided with a PDF fi le of the article via e-mail. For an extra charge, paper offprints can be ordered via the offprint order form which is sent once the article is accepted for publication. The PDF fi le is a watermarked version of the published article and includes a cover sheet with the journal cover image and a disclaimer outlining the terms and conditions of use.
Author benefi ts: Contributors to Elsevier journals are entitled to a 30% discount on all Elsevier books.
EditorsProf. M. Flytzani-StephanopoulosDepartment of Chemical and Biological EngineeringTufts University4 Colby St. Medford, MA 02155E-mail: mfl [email protected]
Dr. R. McCabeDept. of Chemical EngineeringFord Motor Company2101 Village Road, MD3179/RIC, MI 48121Michigan, USAE-mail: [email protected]
Prof. I.-S. NamDepartment of Chemical EngineeringPohang Univ. of Science & TechnologyHyoja San 31 Nam-guPohang, Republic of KoreaE-mail: [email protected]
Prof. Hiromi YamashitaDivision of Materials and ManufacturingScienceGraduate School of Engineering Osaka University2-1 Yamada-oka, Suita Osaka 565-0871JapanE-mail: [email protected]
Prof. X. VerykiosDept. of Chemical EngineeringUniversity of PatrasGR 26504 PatrasGreeceE-mail: [email protected]
Founding Editor Prof. B. Delmon, Louvain-la-Neuve, Belgium
C.R. Apesteguia (Santa Fe, Argentina) M.A. Baltanas (Sante Fe, Argentina)C. Descorme ( Villeurbanne Cedex, France)D. Dionysiou (Cincinnati, OH, USA)D. Duprez (Poitiers, France)A.M. Efstathiou (Nicosia, Cyprus) K. Eguchi (Kyoto, Japan)W. Epling (Houston, TX, USA) R. Farnood (Toronto, ON, Canada)R. Farrauto (Iselin, NJ, USA)M Haneda (Tajimi, Gifu, Japan) F. Hernandez-Beltran (Mëxico, DF, Mexico)S.B. Hong (Pohang, Korea)
E. Hums (Erlangen, Germany)H. Idriss (Riyadh, Saudi Arabia) H. Kominami (Osaka, Japan) D. Kondarides (Patras, Greece)C.-J. Liu (Tianjin, China) A. Martinez Arias (Madrid, Spain) F. Meunier (Caen Cedex, France)T. Ohno (Fukuoka, Japan)B. Ohtani (Sapporo, Japan)L. Olsson (Göteborg, Sweden) U.S. Ozkan (Columbus, OH, USA) V.I. Parvulescu (Bucharest, Romania) J. Pérez-Ramírez (Zurich, Switzerland)
D.E. Resasco (Norman, OK, USA)V. Sadykov (Novosibirsk, Russia)P.G. Smirniotis (Cincinnati, OH, USA)C. Song (University Park, PA, USA)B. Subramaniam (Lawrence, KS, USA)S. Suib (Connecticut, USA)Y.-E. Sung (Seoul, Korea)A. Trovarelli (Udine, Italy) M Wong (Houston, TX, USA) A. Yezerets (Columbus, IN, USA)J. Zhang (Shanghai, China)T. Zhang (Dalian, China)
Applied Catalysis B: Environmental welcomes original, novel and high-impact contributions from the following fi elds:• Catalytic elimination of environmental pollutants, such as nitrogen oxides, carbon monoxide, sulfur compounds, chlorinated and other organic
compounds, and soot emitted from stationary or mobile sources• Basic understanding of catalysts used in environmental pollution abatement, especially as applied to industrial processes• All aspects of preparation, characterization, activation, deactivation and regeneration of novel and commercially applicable environmental catalysts• New catalytic routes and processes for the production of clean energy, such as in hydrogen generation via catalytic fuel processing; and new
catalysts and electrocatalysts for fuel cells• Catalytic reactions in which wastes are converted to useful products• Clean manufacturing replacing toxic chemicals with environmentally friendly catalysts• Scientifi c aspects of photocatalytic processes and basic understanding of photocatalysts as applied to environmental problems• New catalytic combustion technologies and catalysts
Papers dealing with reactions and processes aimed at the production of commercial products and the remaining aspect of catalysis should bedirected to Applied Catalysis A: General. Enzymatic papers should be directed to Journal of Molecular Catalysis B.
Information on submission of manuscripts is available at www.elsevier.com/locate/apcatb.