InPro 6000GSensor Series GasPhase OxygenSensors · 2019-07-18 · 5 Gasphaseoxygensensors InPro6000SensorSeries Orderinginformation InPro6800G,12mm∅ Orderno. Orderno. Orderno. Membranemodule

InPro 6850i GInPro 6900i GInPro 6950i G

InPro 6800 G

Short descriptionThe InPro 6000 G O2 sensor series for gas measurement provides high operational availability togetherwith excellent measurement performance. Without the need for an expensive gas sample conditioning, thesensor can be installed directly in the process and sensor maintenance or replacement can be performedwithout process interruption. Mettler-Toledo Ingold offers a unique easy-to-use and reliable solution forchallenging applications like N2 blanketing, inertization and off-gas monitoring in ex or non-ex applica-tions.

Outstanding features are:– ATEX and FM certification– Wide measurement range– In-situ measurement– Negligible interference with many organic and inorganic substances– Insensitive to humidity– Plug And Measure– ISM (Intelligent Senor Management) technology for enhanced diagnostics and predictive maintenance– 2-minutes maintenance

Contents Typical applications 2

Specifications 2

Drawings 4

Ordering information 5

Compatibility with METTLER TOLEDO transmitters and housings 6

Accessories 6

Spare parts 7

InPro®6000 G Sensor SeriesGas Phase Oxygen Sensors

Technical Data

InPro 6800 G

2

Gas phase oxygen sensors InPro 6000 Sensor Series

Typical applications InPro 6800 G InPro 6850 i G InPro 6900i G InPro 6950i G

Biotechnology/PharmaCentrifugation • • – –Drying • • – –Milling • • – –Storage • • • –Packaging • • • –Food powder processingPowder storage tanks • • • –Powder packaging • • • –Brewery industryCO2 purity before recover • • • –CO2 purity after recovery – – – •CO2 purity in CO2 mains – – – •Chemical powder processingMilling • • – –Powder storage tanks • • • –Powder packaging • • • –Chemical manufacturingNitrogen blanketing • • • –Inertization monitoring • • – –Centrifugation • • – –Drying • • – –Storage • • • –Packaging • • • –Vent gas • • – –Pelletizing • • – –

Specifications InPro 6800 G InPro 6850 i G InPro 6900i G InPro 6950i G

Measurement principle Amperometric /polarographic (in accordance with therequirements of ISO 5814 and EN 25 814)

Working conditionsPermissible pressure range during measuring 0.2 ... 9 bar abs. 0.2 ... 9 bar abs. 0.2 ... 9 bar abs. 0.2 ... 9 bar abs.

(2.9 … 130 psi abs.) (2.9 … 130 psi abs.) (2.9 … 130 psi abs.) (2.9 …130 psi abs.)Mechanical pressure resistance max. 12 bar abs. max. 12 bar abs. max. 12 bar abs. max. 12 bar abs.

(max. 174 psi abs.) (max. 174 psi abs.) (max. 174 psi abs.) (max. 174 psi abs.)Permissible temp. range during measuring 0 ... 70 °C 0 ... 70 °C 0 ... 70 °C 0 ... 40 °C

(32 …158 °F) (32 …158 °F) (32 …158 °F) (32 …104 °F)Mechanical –5 ...121 °C –5 ...121 °C –5 ...121 °C –5 ...121 °C

(23 … 250 °F) (23 … 250 °F) (23 … 250 °F) (23 … 250 °F)Temperature resistance (steam-sterilizable) (steam-sterilizable) (steam-sterilizable) (steam-sterilizable)Sensor performanceDetection limit 0.03 Vol.-% O2 0.03 Vol.-% O2 0.005 Vol.-% O2 0.0005 Vol.-% O2

300 ppm Gas 300 ppm Gas 50 ppm Gas 5 ppm GasAccuracy ≤±[1%+0.03Vol.-%] ≤±[1%+0.03Vol.-%] ≤±[1%+0.005Vol.-%]≤±[1%+0.0005Vol.-%]Response time at 25 °C (77 °F) t90% ≤ 20 s t90% ≤ 20 s t90% ≤ 20 s t90% ≤ 20 sSensor signal in ambient air at 25 °C (77 °F) 50 ...110 nA 50 ...110 nA 250 ...500 nA 2500 … 6000 nAResidual signal in nitrogen at 25 °C (77 °F) ≤ 0,1% of signal ≤ 0,1% of signal ≤ 0,03% of signal ≤ 0,025% of signal

in ambient air in ambient air in ambient air in ambient air

3


Specifications InPro 6800 G InPro 6850 i G InPro 6900i G InPro 6950i G

Design featuresTemperature compensation automatic automatic automatic automatic

with built-in RTD with built-in RTD with built-in RTD with built-in RTDCable connection VarioPin (IP68) K8S K8S K8SWetted O-rings Silicone FDA & USP Silicone FDA & USP Silicone FDA & USP Silicone FDA & USP

Class VI approved Class VI approved Class VI approved Class VI approved(other materials (other materials (other materials (other materialson request) on request) on request) on request)

O2 selective membrane material PTFE/Silicone /PTFE PTFE/Silicone /PTFE PTFE/Silicone /PTFE Silicone /PTFEFDA compliant (rein- FDA compliant (rein- FDA compliant (rein- FDA compliant (rein-forced with steel mesh) forced with steel mesh) forced with steel mesh) forced with steel mesh)

Wetted sensor parts S/steel 1.4404, S/steel 1.4404, S/steel 1.4404, S/steel 1.4404,[AISI 316L] [AISI 316L] [AISI 316L] [AISI 316L]with material with material with material with materialcertificate 3.1 certificate 3.1 certificate 3.1 certificate 3.1(other materials (other materials (other materials (other materialson request) on request) on request) on request)

Surface roughness of wetted s/steel parts Ra <0.4 µm Ra <0.4 µm Ra <0.4 µm Ra <0.4 µm(EN 1320: 1996) [16 µm in] [16 µm in] [16 µm in] [16 µm in]Inner body standard ppm ppb trace with guard

(exchangeable) with Pt anode with guard and Pt anode(exchangeable) (exchangeable) (exchangeable)

Cathode platinum platinum platinum platinumAnode silver /silver chloride platinum silver /silver chloride platinumGuard – – platinum platinumReference silver /silver chloride silver /silver chloride silver /silver chloride silver /silver chlorideATEX compatibility – II 1/2G Ex ia IIC – II 1/2G Ex ia IIC – II 1/2G Ex ia IIC –

T6/T5/T4/T3 T6/T5/T4/T3 T6/T5/T4/T3– II 1/2D Ex iaD A20/21 – II 1/2D Ex iaD A20/21 – II 1/2D Ex iaD A20/21T 69°C/T 81°C/ T 69°C/T 81°C/ T 69°C/T 81°C/T 109°C/T 161°C T 109°C/T 161°C T 109°C/T 161°C

FM compatibility IS CL I, II, III /1 / IS CL I, II, III /1 / IS CL I, II, III /1 / –ABCDEFG/T6 Ta=60°C ABCDEFG/T6 Ta=60°C ABCDEFG/T6 Ta=60°C- 53 800 002; Entity - 53 800 002; Entity - 53 800 002; Entity

Certificates (MaxCert™)Quality (Final inspection Cert.) yes yes yes yesFDA/USP Class VI yes yes yes yesMaterial certificate 3.1 yes yes yes yesSurface finish certificate 2.1 yes yes yes yesATEX yes yes yes noFM yes yes yes no

4


Drawings

InPro 6800 G InPro 6850i G InPro 6900i GInPro 6950i G

Sensor headDigital sensors(ISM)

a

Threaded sleevePg 13.5

O-ring

[ 12 mm

Sensor shaft

O-ring

Inner bodyO-ringO-ring

Reference

AnodeCathode

Retainer nut forinner body

Membrane body

O-ring

Cap sleeve(N type)

Protection cap

VP connector,straight


WasherO-ring

[ 12 mm

Sensor shaft

O-ring

Inner bodyO-ringO-ring

Silveranode

Cathode

Retainer nutfor inner body

Membrane body

O-Ring

Cap sleeve(Typ N)

VP connector,angled

a

Protection cap

Sensor headDigital sensors(ISM)

a


O-ring

[ 12 mm

Sensor shaft

O-ring

Inner body (6900i G)O-ringO-ring

Silver anode

Cathode withguard ring

Retainer nut forinner body

Membrane body

O-ring

Cap sleeve(N type)

Protection cap

Inner body(6950i G)

O-ringO-ring

Reference

AnodeCathode with

guard ring

5


Ordering information

InPro 6800 G, 12 mm ∅ Order no. Order no. Order no.Membrane module Gas Gas GasWetted material 316L 316L C22O-Ring material Silicone Kalrez Kalrez

Immersion length (a)120 mm (4.7") 52 206 425 52 206 427 52 206 429220 mm (8.7") 52 206 426 52 206 428 52 206 430

InPro 6850i GMembrane module Gas Gas GasWetted material 316L 316L C22O-Ring material Silicone Kalrez Kalrez

Immersion length (a)120 mm (4.7") 52 206 431 52 206 433 52 206 435220 mm (8.7") 52 206 432 52 206 434 52 206 436

InPro 6900i GMembrane module Gas GasWetted material 316L 316LO-Ring material Silicone Kalrez

Immersion length (a)120 mm (4.7") 52 206 437 52 206 439220 mm (8.7") 52 206 438 52 206 440

InPro 6950i GMembrane module GasWetted material 316LO-Ring material Silicone

Immersion length (a)120 mm (4.7") 52 206 443220 mm (8.7") 52 206 444

6

InPro 6800 G InPro 6850i G InPro 6900i G InPro 6950iM700 • (4700i) • (4700i) • (4700i ppb) • (4700i traces)

4100 PA, FF • • •1 –M300 • • – –M400 • • • –M420 • • • (TAN) • (TAN)

1 limited functions

Compatibility with METTLER TOLEDO housings

Static housings 12 mmINGOLD “safety weld-in socket” –InFit 761 series •Retractable housingInTrac 777e •InTrac 797e •


Compatibility with METTLER TOLEDO transmitters

Accessories

02 sensor masterThe sensor master serves to polarize the connected sensor in air as well as to check functioning of the sensor.Perfect operation of the sensor master can also be verified through a self-check procedure.

02 sensor simulatorThe sensor simulator is used to perform a function check of transmitter and cable. It simulates the behavior of thesensor in air and in an oxygen-free medium. This device can be used to simulate all amperometric analog O2 sensors.

Sensor Order no.O2 sensor master InPro 6800 52 200 892O2 sensor master ISM 52 206 329O2 sensor simulator 52 200 891Zeroing gel for zero-point control 34 100 1032

VP cable Order no. Order no.Temperature range –30…80°C/–22…176°F Temperature range –30…130°C/–22…266°FVP6-ST /1m 52 300 107 VP6-HT/1m 52 300 111VP6-ST /3m 52 300 108 VP6-HT/3m 52 300 112VP6-ST /5m 52 300 109 VP6-HT/5m 52 300 113VP6-ST /10m 52 300 110 VP6-HT/10m 52 300 114VP6-ST /15m 52 300 144 VP6-HT/15m 52 300 237VP6-ST /35m 52 300 184

AK9 coax cables with K8S connector1 m (3.3 ft) 10 000 01023 m (9.8 ft) 10 000 03025 m (16.4 ft) 10 000 050210 m (32.8 ft) 10 000 100220 m (65.6 ft) 52 300 204

Please ask your localMETTLER TOLEDOsales representative.

Please ask your localMETTLER TOLEDOsales representative.

7


Spare parts

InPro 6800 G Order no.Membrane body InPro 6800 Gas (single unit) 52 201 151Membrane kit InPro 6800 Gas (4 membrane bodies, 1 O-ring set, 25 ml electrolyte) 52 201 149Membrane body InPro 6800 Gas Ka (single unit) 52 201 158Membrane kit InPro 6800 Gas Ka (4 membrane bodies, 1 O-ring set, 25 ml electrolyte) 52 201 159Membrane body InPro 6800 Gas C22 Ka (single unit) 52 201 163Membrane kit InPro 6800 Gas C22 Ka (4 membrane bodies, 1 O-ring set, 25 ml electrolyte) 52 201 164Inner body InPro 6800 G (exchangeable) 52 206 449Electrolyte 25ml 341 002 016

InPro 6850i G Order no.Membrane body InPro 6850i G (single unit) 52 206 453Membrane kit InPro 6850i G (4 membrane bodies, 1 O-ring set, 25 ml electrolyte) 52 206 454Membrane body InPro 6850i G Ka (single unit) 52 206 455Membrane kit InPro 6850i G Ka (4 membrane bodies, 1 O-ring set, 25 ml electrolyte) 52 206 456Membrane body InPro 6850i G C22 Ka (single unit) 52 206 457Membrane kit InPro 6850i G C22 Ka (4 membrane bodies, 1 O-ring set, 25 ml electrolyte) 52 206 458Inner body InPro 6850i G (exchangeable) 52 206 450Electrolyte 25ml 341 002 016

InPro 6900i G Order no.Membrane body InPro 6900i G (single unit) 52 206 459Membrane kit InPro 6900i G (4 membrane bodies, 1 O-ring set, 2�5 ml electrolyte) 52 206 460Membrane body InPro 6900i G Ka (single unit) 52 206 461Membrane kit InPro 6900i G Ka (4 membrane bodies, 1 O-ring set, 2�5 ml electrolyte) 52 206 462Inner body InPro 6900i G (exchangeable) 52 206 451Electrolyte 5ml 52 201 005

InPro 6950i G Order no.Membrane body InPro 6950i G (single unit) 52 206 465Membrane kit InPro 6950i G (4 membrane bodies, 1 O-ring set, 2�5 ml electrolyte) 52 206 466Inner body InPro 6950i G (exchangeable) 52 206 452Electrolyte 5ml 52 206 111

Inner body

Cap sleeve

Membrane body

P type N type

6800Gas 6850i G6900i G

InPro 6800 G InPro 6850i G

www.mt.com/proManagement Systemcertified according toISO 9001 / ISO 14001

9001certified

ISO14001certified

ISO

METTLER TOLEDO Market Organizations

Subject to technical changes.07/ 2012. © Mettler-Toledo AGPrinted in Switzerland. 52 206 472

Sales and Service:

AustraliaMettler-Toledo Ltd.220 Turner StreetPort MelbourneAUS-3207 Melbourne /VICPhone +61 1300 659 761Fax +61 3 9645 3935e-mail [email protected]

AustriaMettler-Toledo Ges.m.b.H.Südrandstraße 17A-1230 WienPhone +43 1 604 19 80Fax +43 1 604 28 80e-mail [email protected]

BrazilMettler-Toledo Ind. e Com. Ltda.Alameda Araguaia, 451AlphavilleBR-06455-000 Barueri /SPPhone +55 11 4166 7444Fax +55 11 4166 7401e-mail [email protected]

[email protected]

ChinaMettler-Toledo Instruments(Shanghai) Co. Ltd.589 Gui Ping RoadCao He JingCN-200233 ShanghaiPhone +86 21 64 85 04 35Fax +86 21 64 85 33 51e-mail [email protected]

CroatiaMettler-Toledo d.o.o.Mandlova 3HR-10000 ZagrebPhone +385 1 292 06 33Fax +385 1 295 81 40e-mail [email protected]

Czech RepublicMettler-Toledo s.r.o.Trebohosticka 2283/2CZ-100 00 Praha 10Phone +420 2 72 123 150Fax +420 2 72 123 170e-mail [email protected]

DenmarkMettler-Toledo A/SNaverland 8DK-2600 GlostrupPhone +45 43 27 08 00Fax +45 43 27 08 28e-mail [email protected]

FranceMettler-ToledoAnalyse Industrielle S.A.S.30, Boulevard de DouaumontF-75017 ParisPhone +33 1 47 37 06 00Fax +33 1 47 37 46 26e-mail [email protected]

GermanyMettler-Toledo GmbHProzeßanalytikOckerweg 3D-35396 GießenPhone +49 641 507 333Fax +49 641 507 397e-mail [email protected]

Great BritainMettler-Toledo LTD64 Boston Road, Beaumont LeysGB-Leicester LE4 1AWPhone +44 116 235 7070Fax +44 116 236 5500e-mail [email protected]

HungaryMettler-Toledo Kereskedelmi KFTTeve u. 41HU-1139 BudapestPhone +36 1 288 40 40Fax +36 1 288 40 50e-mail [email protected]

IndiaMettler-Toledo India Private LimitedAmar Hill, Saki Vihar RoadPowaiIN-400 072 MumbaiPhone +91 22 2857 0808Fax +91 22 2857 5071e-mail [email protected]

ItalyMettler-Toledo S.p.A.Via Vialba 42I -20026 Novate MilanesePhone +39 02 333 321Fax +39 02 356 [email protected]

JapanMettler-Toledo K.K.Process Division6F Ikenohata Nisshoku Bldg.2-9-7, IkenohataTaito-kuJP-110-0008 TokyoPhone +81 3 5815 5606Fax +81 3 5815 5626e-mail [email protected]

MalaysiaMettler-Toledo (M) Sdn BhdBangunan Electroscon Holding, U 1-01Lot 8 Jalan Astaka U8/84Seksyen U8, Bukit JelutongMY-40150 Shah Alam SelangorPhone +60 3 78 44 58 88Fax +60 3 78 45 87 [email protected]

MexicoMettler-Toledo S.A. de C.V.Ejercito Nacional #340Col. Chapultepec MoralesDel. Miguel HidalgoMX-11570 México D.F.Phone +52 55 1946 0900e-mail [email protected]

PolandMettler-Toledo (Poland) Sp.z.o.o.ul. Poleczki 21PL-02-822 WarszawaPhone +48 22 545 06 80Fax +48 22 545 06 88e-mail [email protected]

RussiaMettler-Toledo Vostok ZAOSretenskij Bulvar 6/1Office 6RU-101000 MoscowPhone +7 495 621 56 66Fax +7 495 621 63 53e-mail [email protected]

SingaporeMettler-Toledo (S) Pte. Ltd.Block 28Ayer Rajah Crescent #05-01SG-139959 SingaporePhone +65 6890 00 11Fax +65 6890 00 12

+65 6890 00 13e-mail [email protected]

SlovakiaMettler-Toledo s.r.o.Hattalova 12/ASK-83103 BratislavaPhone +421 2 4444 12 20-2Fax +421 2 4444 12 23e-mail [email protected]

SloveniaMettler-Toledo d.o.o.Pot heroja Trtnika 26SI -1261 Ljubljana-DobrunjePhone +386 1 530 80 50Fax +386 1 562 17 89e-mail [email protected]

South KoreaMettler-Toledo (Korea) Ltd.Yeil Building 1 & 2 F124-5, YangJe-DongSeCho-KuKR-137-130 SeoulPhone +82 2 3498 3500Fax +82 2 3498 3555e-mail [email protected]

SpainMettler-Toledo S.A.E.C /Miguel Hernández, 69-71ES-08908 L’Hospitalet de Llobregat(Barcelona)Phone +34 902 32 00 23Fax +34 902 32 00 24e-mail [email protected]

SwedenMettler-Toledo ABVirkesvägen 10Box 92161SE-12008 StockholmPhone +46 8 702 50 00Fax +46 8 642 45 62e-mail [email protected]

SwitzerlandMettler-Toledo (Schweiz) GmbHIm LangacherPostfachCH-8606 GreifenseePhone +41 44 944 45 45Fax +41 44 944 45 10e-mail [email protected]

ThailandMettler-Toledo (Thailand) Ltd.272 Soi Soonvijai 4Rama 9 Rd., BangkapiHuay KwangTH-10320 BangkokPhone +66 2 723 03 00Fax +66 2 719 64 [email protected]

USA/CanadaMettler-Toledo Ingold, Inc.36 Middlesex TurnpikeBedford, MA 01730, USAPhone +1 781 301 8800Freephone +1 800 352 8763Fax +1 781 271 0681e-mail [email protected]

Mettler-Toledo AG, Process AnalyticsIm Hackacker 15, CH-8902 Urdorf, SwitzerlandPhone + 41 44 729 62 11, Fax +41 44 729 66 36

Documents

InPro 6000GSensor Series GasPhase OxygenSensors · 2019-07-18 · 5 Gasphaseoxygensensors InPro6000SensorSeries Orderinginformation InPro6800G,12mm∅ Orderno. Orderno. Orderno. Membranemodule