IN-STREET PEDESTRIAN CROSSWALK SIGN€¦ · in parking garages and in parking lots. Base and base mounting hardware is sold separately. Surface Mount Base Fixed or Quick Release Model

Dimensions: Overall: 12” x 47”Panel: 12” x 44” (8” bib)Reflective Sheet: 12” x 36”(10” x 24” white insert sheet)Post: 42” (2.375” OD)

47”

36”

8”

24”

12”10”

Reactive Springbuilt into unit.

2.375” OD

SPECIFICATIONS SHEET

Front View Front View

Double-Sided“CAUTION”

YIELD (R1-6)(Shown)

Single-Sided“STATE LAW”STOP (R1-6A)(Shown)Si

de V

iew

IN-STREET PEDESTRIAN CROSSWALK SIGNHIGHLY VISIBLE, REBOUNDING CROSSWALK SIGN

SPEC-PED | 06/15/2017

FEATURES

SPECIFICATIONS RECOMMENDED USE

• Yields Fully upon impact• Anti-Twist Reactive Spring

assembly returns unit to upright position when struck.

• Cost Effective component design

SignModel: • YIELD (R1-6) or • STOP (R1-6A)Sign Heading: • STATE LAW (Standard)• CAUTION or DC LAW (available)Sides: Single or double sided options

PanelsMaterial: Flexible HDPE plasticColor: White

PostMaterial: Flexible HDPE plasticColor: WhiteSize: 42” (2.375” OD)Post Style: Black cap (Plastic)

Reactive Spring Type: Fixed or quick release

Retro-Reflective SheetingSheeting Type: Diamond gradePanel Sheeting Color:• Yellow or• Fluorescent yellow-greenInsert Sheeting Color:• White sheeting (Red & black ink)

• Ideal for delineating crosswalks to reduce the risk of injury, death & property damage.

• Non-signalized intersections• Mid-street crossings• Take care to avoid creating a trip

hazard when using any sign near pedestrian traffic.

Base and base mounting hardware is sold separately.

Surface Mount BaseFixed or Quick Release Model• Durable HDPE plastic• Colors: Black, yellow & white• 8” x 8” x 1”• Installs with anchors or epoxyOne Base®Portable Quick Release Base• Black recycled rubber• 86cm x 36cm

Snow-Plowable Recessed Base• Hardened cast iron• Installs into pavement (recessed)

• Durable HDPE Plastic is resistant to ozone, UV light & hydrocarbons.

• Single or Double-Sided • Graffiti Protective Film available• MUTCD compliant

BASE OPTIONS

©2017 Impact Recovery Systems | © 2017 Impact Traffic | All rights reserved.

PHONE: +1(210) 736-4477

FAX: +1(210)734-6448

Impact Recovery Systems, Inc. 4955 Stout Dr.

San Antonio, TX 78219 United States

[email protected]

DimensionsOuter Diameter: 2.375" Standard Post Heights: 28", 36", 42" and 48"Short Squeeze: 2" squeezeLong Squeeze: 14" squeeze

28"36"42"48"

14" 3"

2"


3.14"

2.375" OD

3" x

12"

Colors:


BASE OPTIONS



• Quick, Easy Installation

Post Material: Flexible HDPE plastic Available Colors: White, yellow, orange, red, gray, black or greenPost Style: • Long squeeze (14" from top)• Short squeeze (2" from top)• Black cap (Black plastic)• Open top

Reactive Spring Type: Fixed, quick release or drivable

Reflective SheetingRetro-Reflective Sheeting:• High-Intensity sheeting or• Diamond grade sheetingAvailable Colors: White, yellow, orange, red, green or blueIncluded Sheeting:• Long Squeeze: Single sheet

3" x 12" refelctive sheet included. (Double-side sheeting available.)

• Short Squeeze, Black Cap & Open Top: Two 3in bands included. Custom configurations available.

• Ideal when increased visibility and channelization is needed.

• Use for indicating alignment in roadway, atop Tuff Curb® systems, in parking garages and in parking lots.


Surface Mount BaseFixed or Quick Release Model• Durable HDPE plastic• Colors: Black, yellow or white• 8” x 8” x 1”• Installs with anchors or epoxy

Drivable Base For In-Ground Installations• 12-gauge perforated steel tubing• 2" x 2" x 18"

Impact Traffic Channelizer CurbTuff Curb™ or Tuff Curb XLP™• Colors: Yellow, white or Green(XLP)

• Retro-Reflective sheeting• Durable HDPE Plastic is resistant

to ozone, UV light & hydrocarbons.• Vivid Integral Color• MUTCD compliant

Long Squeeze Short Squeeze Black Cap (or open top)

MP FLEX POST2.375" HIGH PERFORMANCE FLEXIBLE CHANNELIZER POST

SPEC-MP2 | 06/15/2017


FEATURES


PHONE: +1(210) 736-4477

FAX: +1(210)734-6448



[email protected]

DimensionsOuter Diameter: 3" Standard Post Heights: 28", 36", 42" and 48"Short Squeeze: 2" squeezeLong Squeeze: 14" squeeze

28"36"42"48"

14" 3"

2"


4.5"

3" OD

4" x

12"

Colors:


BASE OPTIONS




Post Material: Flexible polyproplene plastic Available Colors: White, yellow or orangePost Style: • Long squeeze (14" from top)• Short squeeze (2" from top)• Black cap (Black plastic)• Open top



4" x 12" refelctive sheet included. (Double-side sheeting available.)

• Short Squeeze, Black Cap & Open Top: Two 3" bands included. Custom configurations available.







• Retro-Reflective sheeting• Durable Flexible Plastic is resistant


Long Squeeze

Short Squeeze

Black Cap (or open top)

3" TUFF POSTHIGH PERFORMANCE FLEXIBLE DELINEATOR POST

SPEC-TP3 | 06/15/2017


FEATURES


PHONE: +1(210) 736-4477

FAX: +1(210)734-6448



[email protected]

DimensionsOuter Diameter: 4" Standard Post Heights: 28", 36", 42" and 48"Short Squeeze: 2" squeezeLong Squeeze: 14" squeeze

28"36"42"48"

14" 4"

2"


6.125"

4" OD

5.75

" x

12"

Colors:


BASE OPTIONS




Post Material: Flexible polyproplene plastic Available Colors: White or yellowPost Style: • Long squeeze (14" from top)• Short squeeze (2" from top)• Black cap (Black plastic)• Open top



5.75" x 12" refelctive sheet included. (Double-side sheeting available.)

• Short Squeeze, Black Cap & Open Top: Two 4" bands included. Custom configurations available.







• Retro-Reflective sheeting• Durable Flexible Plastic is resistant


Long Squeeze

Short Squeeze

Black Cap (or open top)

4" TUFF POSTLARGE DIAMETER FLEXIBLE DELINEATOR POST

SPEC-TP4 | 06/15/2017


FEATURES


PHONE: +1(210) 736-4477

FAX: +1(210)734-6448



[email protected]

DimensionsOverall: 8" x 8" x 1" Hole Pattern: 4.38" (Center to Center) Shoulder Bolt Spacing: 2.375" (Center to Center)

8"

2.375" 4.38"

8"

1"

FEATURES


• Interchangable Uprights• Durable HDPE Plastic• Resistant to UV Light, Ozone &

Hydrocarbons

Material: High Density Polyethylene

Hardware: Zinc-plated, socket cap screws & t-nutOptional Stainless Steel Hardware: Stainless steel screws & t-nuts

Colors: Black, yellow or white

Installation• 4 anchors - Impact Traffic anchor

kit (recommended) • Epoxy

Upright Support: Supports all Impact Traffic uprights that utilize our Fixed spring type.

• Permanent applications

Take care to avoid creating a trip hazard when using any sign in the presence of pedestrians. Ensure that sign bases are outside pedestrian travel areas.

• Low-Profile Design• Instantly Operational• Installs Easily with anchors

or epoxy

Colors:

SURFACE MOUNT FIXED BASESPEC-BS-SMF | 06/15/2017

PERMANENT, SURFACE MOUNTED SQUARE BASE



PHONE: +1(210) 736-4477

FAX: +1(210)734-6448



[email protected]

DimensionsOverall: 8" x 8" x 1" Hole Pattern: 4.38" (Center to Center) Shoulder Bolt Spacing: 2.375" (Center to Center)

8"

2.375" 4.38"

8"

1"

FEATURES


• Low-Profile Design• Durable HDPE Plastic• Resistant to UV Light, Ozone &

Hydrocarbons

Material: High Density Polyethylene

Hardware: T-nuts: Zinc Shoulder Bolts: Yellow zinc chromate Plate: Galvanized Steel

Colors: Black, yellow or white

Installation• 4 anchors - Impact Traffic anchor

kit (recommended) • Epoxy

Upright Support: Supports all Impact Traffic uprights that utilize our Quick Release spring type.

• Permanent applications


• Interchangable Uprights: Change out uprights in seconds

• Installs Easily with anchors or epoxy

Quick Release AdvantageChange out or remove uprights in less than five seconds, without the use of tools or special equipment. To remove the upright, simply pull the keeper pin, rotate the assembly 15° and lift.

Colors:

Quick Release Feature

SURFACE MOUNT QUICK RELEASE BASE

SPEC-BS-SMQ | 06/15/2017

PERMANENT, SURFACE MOUNTED SQUARE BASE FOR INTERCHANGING UPRIGHTS



PHONE: +1(210) 736-4477

FAX: +1(210)734-6448



[email protected]

DimensionsOverall: 34" x 14" x 2" Weight: 36 lbs

14"

34"

2"


• 100% Recycled Rubber• Easily Transported & Stored• Ergonomic Molded Carry Handle• Easy to Assemble

Material: Made of post consumer recycled crumb rubber

Upright Support: Supports all Impact Traffic uprights that utilize our quick release spring type.

Hardware: T-nuts: ZincShoulder bolts: Yellow zinc chromatePlate: Galvanized steel

Color: Black

• Temporary applications• Use in parking garages and in

parking lots • Special events and convention

centers• Work zone applications


• Quick Deployment• Compatible with all Impact Traffic

uprights that feature a quick release spring type

Top View

Side View

ONE BASE®PORTABLE QUICK RELEASE BASE

SPEC-BS-P1 | 06/15/2017


FEATURES


PHONE: +1(210) 736-4477

FAX: +1(210)734-6448



[email protected]

Documents

IN-STREET PEDESTRIAN CROSSWALK SIGN€¦ · in parking garages and in parking lots. Base and base mounting hardware is sold separately. Surface Mount Base Fixed or Quick Release Model