1
tern of pulse control. Laboratory find- ings can be extrapolated to larger sizes. The A/min readout system is unique for arriving at the effective current available for electrodeposition. A 10-A current corresponds to 100 counts/min, and 1 count/min corresponds to 0.1 A. As the reverse current is increased, the count rate decreases proportionately. Resettable totalizing and batch-type counters are featured. When the batch count equals zero, the current reaches zero as indicated by a pilot light. The cycle repeats when the batch count is reinstated. Circle 440 on reader information card immersion Cleaning Systems Tally Cleaning Systems A ffleboro Falls, Mass. The Tally Cleaning Systems Aqua Lift, a mechanical-agitation, immer- sion-cleaning system utilizing aqueous cleaning solutions, is designed with features to enhance service life, such as a control valve guaranteed for 200 million cycles and a lift/agitation cylin- der rated for 10 million ft of agitation strokes. This system is also designed to minimize operating costs by utilizing 80 psi compressed-air supply instead of the industry typical 100 or 125 psi. The system’s modular design permits customization to most processes and adaptation to process changes after the fact. Other features are a stainless steel tank and fiberglass insulation, both standard. Aqua Lift is available in three standard tank sizes and three standard lift capacities and can be modified for unique applications. Circle 441 on reader information card A. When if’s a J-PRESS@ of course! 800mm J-PRES Things to consider: ?? Complete range of filter press sizes, * Volume capacity flexibility. For almost 25 years JWI@ has been developing quality prod- ucts that serve the surface fin- ishing industry. J-Press@ filter presses and J-Mate” sludge dryers are manufactured to exacting standards. When you are considering your options for ??100 and 225 psi operating pressures. waste reduction, you owe it to ?? Extensive variety of automatic controls. yourself to discuss your needs * Reduces volume and disposal costs. with a JWI representative. ?? Technical laboratory assistance. You provide the problem... * Extensive spare pans inventory. We provide the solution. JWI 2155 112th Industrial Drive / Holland, Ml 49424 USA Tel: 616-772-9011 I Fax: 616-772-4516 / l-800-21 4-1682 Circle 080 en reader information card Methylene Chloride Replacement MacDermid Inc. Waferbuy, Conn. MacDeimid Inc. introduces a new cleaning agent specifically formulated ?? Completely assembled and wired ?? Pump can be unscrewed and remotely located ?? Solenoid valve can be subsbtuted or used I” confunctlon wth pump s 2 sets of relay contacts rated 10 amps . Proporhonal control now Included. ?? Adjustable flow rate of 10 1 wth ranges of 3-30, 30-300 63-630 or 173-t 730 ml/mm ?? Weatherproof case Included Provides simplified AUTOMATIC pH control of effluent in stream, laboratory or plant. METAL FINISHING . APRIL 1995 85

Immersion cleaning systems

  • Upload
    duongtu

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Immersion cleaning systems

tern of pulse control. Laboratory find- ings can be extrapolated to larger sizes. The A/min readout system is unique for arriving at the effective current available for electrodeposition. A 10-A current corresponds to 100 counts/min, and 1 count/min corresponds to 0.1 A.

As the reverse current is increased, the count rate decreases proportionately. Resettable totalizing and batch-type counters are featured. When the batch count equals zero, the current reaches zero as indicated by a pilot light. The cycle repeats when the batch count is reinstated.

Circle 440 on reader information card

immersion Cleaning Systems Tally Cleaning Systems A ffleboro Falls, Mass.

The Tally Cleaning Systems Aqua Lift, a mechanical-agitation, immer- sion-cleaning system utilizing aqueous cleaning solutions, is designed with

features to enhance service life, such as a control valve guaranteed for 200 million cycles and a lift/agitation cylin- der rated for 10 million ft of agitation strokes. This system is also designed to minimize operating costs by utilizing 80 psi compressed-air supply instead of the industry typical 100 or 125 psi. The system’s modular design permits customization to most processes and adaptation to process changes after the fact. Other features are a stainless steel tank and fiberglass insulation, both standard. Aqua Lift is available in three standard tank sizes and three standard lift capacities and can be modified for unique applications.

Circle 441 on reader information card

A. When if’s a J-PRESS@ of course!

800mm J-PRES

Things to consider: ??Complete range of filter press sizes, * Volume capacity flexibility.

For almost 25 years JWI@ has been developing quality prod- ucts that serve the surface fin- ishing industry. J-Press@ filter presses and J-Mate” sludge dryers are manufactured to exacting standards. When you are considering your options for

??100 and 225 psi operating pressures. waste reduction, you owe it to

??Extensive variety of automatic controls. yourself to discuss your needs

* Reduces volume and disposal costs. with a JWI representative.

??Technical laboratory assistance. You provide the problem... * Extensive spare pans inventory. We provide the solution.

JWI 2155 112th Industrial Drive / Holland, Ml 49424 USA Tel: 616-772-9011 I Fax: 616-772-4516 / l-800-21 4-1682

Circle 080 en reader information card

Methylene Chloride Replacement MacDermid Inc. Waferbuy, Conn.

MacDeimid Inc. introduces a new cleaning agent specifically formulated

?? Completely assembled and wired

?? Pump can be unscrewed and remotely located

?? Solenoid valve can be subsbtuted or used I” confunctlon wth pump

s 2 sets of relay contacts rated 10 amps

. Proporhonal control now Included.

?? Adjustable flow rate of 10 1 wth ranges of 3-30, 30-300

63-630 or 173-t 730 ml/mm

?? Weatherproof case Included

Provides simplified AUTOMATIC pH control of effluent in stream, laboratory or plant.

METAL FINISHING . APRIL 1995 85