iManager U2000 Acceptance Test Guide For replacing N2000-1

iManager U2000 V100R002C01 Acceptance Test Guide

Contents

ContentsCommon Domain Operation Guide (Basic Package) ................................ ............................. 1T01 Topology Management................................ ................................ ................................ .............................. 1 T01-01 Topology Operations ................................ ................................ ................................ ...................... 1 T01-0101 Expanding and Collapsing a Topological Object ................................ ................................ .1 T01-0102 Viewing the Connection Information ................................ ................................ .................. 2 T01-0103 Viewing the Attributes of a Topological Object ................................ ................................ ...2 T01-0104 Editing a Topological Object ................................ ................................ .............................. 3 T01-0105 Setting the Display Mode of the Topology View................................ ................................ ..3 T01-0106 Searching for Topological Objects ................................ ................................ ...................... 4 T01-0107 Customizing the Topology View ................................ ................................ ......................... 4 T01-02 Topology Alarms................................ ................................ ................................ ............................ 5 T01-0201 Viewing Current Alarms of an NE ................................ ................................ ...................... 5 T01-0202 Synchronizing Current Alarms of an NE ................................ ................................ ............. 5 T01-0203 Acknowledging Alarms of an NE ................................ ................................ ........................ 6 T02 Fault Management ................................ ................................ ................................ ................................ ....7 T02-01 Alarm Browsing ................................ ................................ ................................ ............................. 7 T02-0101 Viewing Alarms and Events ................................ ................................ ................................ 7 T02-0102 Collecting the Alarm/Event Log Statistics ................................ ................................ ...........7 T02-0103 Synchronizing Networkwide Alarms ................................ ................................ ................... 8 T02-0104 Stopping the Alarm Sound ................................ ................................ ................................ ..8 T02-0105 Locating an Alarm in the Topology View ................................ ................................ ............ 9 T02-0106 Setting the Colors for the Alarm Severity Indicator ................................ ............................. 9 T02-0107 Displaying Sorted Alarms ................................ ................................ ................................ . 10 T02-0108 Checking the Reliability of Alarms (IP) ................................ ................................ ............ 10 T02-02 Alarm Settings ................................ ................................ ................................ ............................. 11 T02-0201 Acknowledging Alarms Automatically ................................ ................................ .............. 11 T02-0202 Synchronizing Alarms Automatically ................................ ................................ ................ 11 T02-0203 Setting Fault Diagnosis Rules ................................ ................................ ........................... 12 T02-0204 Redefining an Alarm or Event................................ ................................ ........................... 12 T02-0205 Masking an NE Alarm or Event ................................ ................................ ........................ 13 T02-0206 Analyzing the Alarm Correlation ................................ ................................ ...................... 14 T02-0207 Setting the NE Alarm Attribute Template ................................ ................................ .......... 14 T02-0208 Setting the Maintenance Experience ................................ ................................ ................. 15

Issue 01 (2010-07-31)

Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd.

i


Contents

T02-03 Alarm or Event Dump ................................ ................................ ................................ .................. 15 T02-0301 Dumping Alarms or Events Manually ................................ ................................ ............... 15 T02-0302 Dumping Alarms or Events Automatically ................................ ................................ ........ 16 T02-0303 Saving Alarms or Events as a File ................................ ................................ ..................... 17 T03 Inventory Management................................ ................................ ................................ ............................ 17 T03-01 Physical Inventory ................................ ................................ ................................ ....................... 17 T03-0101 Managing NEs ................................ ................................ ................................ ................. 17 T03-0102 Managing Boards ................................ ................................ ................................ ............. 18 T03-0103 Managing Ports ................................ ................................ ................................ ................ 19 T04 NMS Security Management ................................ ................................ ................................ .................... 20 T04-01 Security Management................................ ................................ ................................ ................... 20 T04-0101 Managing Users ................................ ................................ ................................ ............... 20 T04-0102 Managing User Groups................................ ................................ ................................ ..... 21 T04-0103 Managing Operation Sets................................ ................................ ................................ .. 23 T04-0104 Managing Object Sets................................ ................................ ................................ ....... 23 T04-0105 Managing the ACL List ................................ ................................ ................................ .... 24 T04-02 Client Access Control ................................ ................................ ................................ ................... 25 T04-0201 Locking and Unlocking a Client ................................ ................................ ....................... 25 T04-0202 Setting the Automatic Lock Time of the Client ................................ ................................ .. 25 T04-0203 Forcing a User to Exit................................ ................................ ................................ ....... 26 T05 NMS Log Management ................................ ................................ ................................ ........................... 26 T05-01 NMS Operation Logs ................................ ................................ ................................ ................... 26 T05-0101 Viewing the U2000 Logs ................................ ................................ ................................ .. 26 T05-02 Log Storage ................................ ................................ ................................ ................................ . 27 T05-0201 Saving and Dumping NMS Logs as a File ................................ ................................ ......... 27 T06 Database Backup Management ................................ ................................ ................................ ................ 27 T06-01 Database Backup................................ ................................ ................................ .......................... 27 T06-0101 Backing Up and Restoring the Database................................ ................................ ............ 27 T07 NMS License Management ................................ ................................ ................................ ..................... 28 T07-01 NMS License ................................ ................................ ................................ ............................... 28 T07-0101 Querying the License................................ ................................ ................................ ........ 28 T08 System Monitoring and Management ................................ ................................ ................................ ...... 29 T08-01 System Monitoring................................ ................................ ................................ ....................... 29 T08-0101 Querying and Maintaining Process Parameters ................................ ................................ .. 29 T08-0102 Querying and Maintaining the System Monitoring Parameters ................................ .......... 29 T08-0103 Shutting Down the U2000 Server................................ ................................ ...................... 30 T08-0104 Starting the U2000 Server ................................ ................................ ................................ . 31 T08-02 System Management ................................ ................................ ................................ .................... 31 T08-0201 Setting Resource Usage Threshold ................................ ................................ .................... 31 T09 T09 Customer Management................................ ................................ ................................ ..................... 32 T09-01 Customer Operations ................................ ................................ ................................ .................... 32 T09-0101 Creating a Customer Group ................................ ................................ .............................. 32 T09-0102 Creating a Customer ................................ ................................ ................................ ......... 32 Issue 01 (2010-07-31) Huawei Proprietary and Confidential Copyright Huawei Technologies Co., Ltd. ii


Contents

T09-0103 Authorizing a Customer to a U2000 User ................................ ................................ .......... 33 T09-0104 Querying the Customer Authorization Information ................................ ............................ 33 T10 Link Management ................................ ................................ ................................ ................................ ... 34 T10-01 Link Management ................................ ................................ ................................ ........................ 34 T10-0101 Creating a Link ................................ ................................ ................................ ................ 34

Router Domain Operation Guide (Basic Package) ................................ ............................... 35Basic Configuration ................................ ................................ ................................ ................................ ....... 35 T01-01 Equipment Search ................................ ................................ ................................ ........................ 35 Searching for the Equipment ................................ ................................ ................................ ............ 35 Manually Adding the Equipment ................................ ................................ ................................ ...... 36 T01-02 Equipment Parameter Setting ................................ ................................ ................................ ....... 37 Setting SNMP Parameters ................................ ................................ ................................ ................ 37 Setting Telnet Parameters ................................ ................................ ................................ ................. 38 T02 NE management................................ ................................ ................................ ................................ ...... 39 T02-01 Equipment Management................................ ................................ ................................ ............... 39 System Information ................................ ................................ ................................ .......................... 39 NE Panel ................................ ................................ ................................ ................................ .......... 40 Card Information ................................ ................................ ................................ .............................. 41 T01-02 Interface Management ................................ ................................ ................................ .................. 43 Configuring an Interface ................................ ................................ ................................ ................... 43 Configuring an Ethernet Interface ................................ ................................ ................................ ..... 44 Creating an Ethernet Subinterface ................................ ................................ ................................ ..... 46 Configuring a POS Interface ................................ ................................ ................................ ............. 48 T02 NE Software Management................................ ................................ ................................ ....................... 50 T02-01 System Configuration................................ ................................ ................................ ................... 50 Performing System Configuration................................ ................................ ................................ ..... 50 T01-02 NE Configuration Operations ................................ ................................ ................................ ....... 51 Saving NEs ................................ ................................ ................................ ................................ ...... 51 Backing Up NEs ................................ ................................ ................................ .............................. 52 Restoring NEs ................................ ................................ ................................ ................................ .. 53

Switch Domain Operation Guide (Basic Package) ................................ ............................... 55Equipment Management ................................ ................................ ................................ ................................ . 55 T01-01 Entity Management ................................ ................................ ................................ ...................... 55 Automatically Discovering Equipment ................................ ................................ ............................. 55 Manually Adding a Set of Equipment ................................ ................................ ............................... 56 T01-02 System Information ................................ ................................ ................................ ...................... 56 Viewing the System Information................................ ................................ ................................ ....... 56 T01-03 NE Panel ................................ ................................ ................................ ................................ ..... 57 Viewing the Equipment Panel ................................ ................................ ................................ ........... 57 T01-04 NE Log ................................ ................................ ................................ ................................ ........ 57 Viewing NE Logs ................................ ................................ ................................ ............................. 57 T02 Interface Management ................................ ................................ ................................ ............................. 58

Issue 01 (2010-07-31)


iii


Contents

T02-01 Interface Information ................................ ................................ ................................ ................... 58 Querying Interface Information ................................ ................................ ................................ ........ 58 Configuring Interface Information ................................ ................................ ................................ .... 58 T03 VLAN Management ................................ ................................ ................................ ................................ 59 T03-01 VLAN Management ................................ ................................ ................................ ..................... 59 Querying Global VLANs ................................ ................................ ................................ .................. 59 Creating a Global VLAN ................................ ................................ ................................ .................. 60 T04 NE Channel Management................................ ................................ ................................ ........................ 60 T04-01 VTY Service ................................ ................................ ................................ ................................ 60 Synchronizing the VTY Service ................................ ................................ ................................ ........ 60 T04-02 Trap Service................................ ................................ ................................ ................................ . 61 Creating a Trap Service ................................ ................................ ................................ .................... 61 Synchronizing Trap Services ................................ ................................ ................................ ............ 61 T05 Route Management ................................ ................................ ................................ ................................ . 62 T05-01 Route Information ................................ ................................ ................................ ........................ 62 Viewing the Routing Table ................................ ................................ ................................ ............... 62 Viewing Route Statistics ................................ ................................ ................................ ................... 62 Viewing the FIB Table ................................ ................................ ................................ ...................... 63 Viewing FIB Statistics ................................ ................................ ................................ ...................... 64 T06 NE Software Management................................ ................................ ................................ ....................... 64 T06-01 System-Related Configuration ................................ ................................ ................................ ...... 64 Configuring System Information ................................ ................................ ................................ ...... 64 T06-02 NE Data Backup/Restoration ................................ ................................ ................................ ........ 65 Saving Configuration Files ................................ ................................ ................................ ............... 65 Backing Up Configuration Files ................................ ................................ ................................ ....... 65 Restoring Configuration Files ................................ ................................ ................................ ........... 66

Issue 01 (2010-07-31)


iv


Error! Use the Home tab to apply 1 to the text that you want to appear here.

Common Domain Operation Guide (Basic Package)T01 Topology ManagementT01-01 Topology OperationsT01-0101 Expanding and Collapsing a Topological ObjectObjective Test Networking Diagram Prerequisites

To test the functions of expanding and collapsing a topological object. None 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be subnets and NEs in the topology view. Right-click in the blank area of the topology view and choose Expand All from the shortcut menu. Right-click in the blank area of the topology view and choose Collapse All from the shortcut menu. All the NE icons are successfully displayed in the Main Topology, and the subnet icons are not displayed. For the NE that belongs to a subnet (excluding the root subnet), only the subnet icon is displayed in the Main Topology. For the NE that only belongs to the root subnet, the NE icon is displayed in the Main Topology.

Test Procedure

1. 2.

Expected Results

1. 2.

Remarks Internal Number

None.(passed) T01-0101

Issue 01 (2010-07-31)


1



T01-0102 Viewing the Connection InformationObjective Test Networking Diagram Prerequisites

To test the function of viewing the connection information in the topology view. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be connections in the topology view. In the topology view, click in the middle of a connection between two NEs where two or more connections exist. Alternatively, right-click the connection and choose Expand from the shortcut menu. Then the connection is expanded. To in the middle of any connection between two collapse a connection, click NEs; alternatively, right-click the connection and choose Collapse from the shortcut menu. 2. In the topology view, move the cursor to a connection. The connection name is displayed in the tooltip. Alternatively, right-click the connection and choose Object Attributes from the shortcut menu. When you choose Expand, the collapsed connection is successfully expanded. When you choose Collapse, the expanded connection is successfully collapsed. The connection attributes are correctly displayed.

Test Procedure

1.

Expected Results

1. 2.


None. T01-0102

T01-0103 Viewing the Attributes of a Topological ObjectObjective Test Networking Diagram Prerequisites

To test the function of viewing the attributes of a topological object. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be NEs or subnets in the topology view.

Test Procedure Expected Results Remarks Internal Number

In the topology view, select an NE or a subnet, right-click, and then choose Object Attributes from the shortcut menu. The attributes of the NE or subnet are correctly displayed. None. T01-0103

Issue 01 (2010-07-31)


2



T01-0104 Editing a Topological ObjectObjective Test Networking Diagram Prerequisites

To test the function of editing a topological object. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be NEs or subnets in the topology view.

Test Procedure

In the topology view, select an NE or a subnet, and then choose Edit > Cut, Edit > Copy, Edit > Copy to, or Edit > Move to from the main menu. Alternatively, rightclick the NE or subnet and choose Edit > Cut, Edit > Copy, Edit > Copy to, or Edit > Move to from the shortcut menu. The NE or subnet is successfully cut, copied or moved. None. T01-0104

Expected Results Remarks Internal Number

T01-0105 Setting the Display Mode of the Topology ViewObjective Test Networking Diagram Prerequisites

To test the function of setting the display mode of the topology view. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose View > Display Setting > Topological Navigation Tree from the main menu. Choose View > Display Setting > Legend from the main menu. Choose View > Display Setting > Filter from the main menu. Choose View > Display Setting > Object Attributes from the main menu. Choose View > Display Setting > Aerial View from the main menu. Choose View > Display Setting > NE Statistics from the main menu. Choose View > Display Setting > Topological Navigation Tree, View > Display Setting > Legend, View > Display Setting > Filter, View > Display Setting > Object Attributes, View > Display Setting > Aerial View, or View > Display Setting > NE Statistics again to close the current user interface. The topological navigation tree is correctly displayed. The Legend, Filter, and Object Attributes panel is displayed in the right area of the topology view. The Legend, Filter, and Object Attributes tabs are displayed on the panel. The aerial view is displayed in the lower-right area of the topology view by default.

Test Procedure

1. 2. 3. 4. 5. 6. 7.

Expected Results

1. 2.

3.

Issue 01 (2010-07-31)


3




None. T01-0105

T01-0106 Searching for Topological ObjectsObjective Test Networking Diagram Prerequisites

To test the function of searching for topological objects. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. In the Main Topology, press the shortcut keys Ctrl+F. The Search dialog box is displayed. On the Basic tab page, select a search type from the Search Type drop-down list box. On the Basic tab page, select a search mode from the Search Mode drop-down list box. On the Basic tab page, enter a keyword in the Keyword text box. Select the check box next to Match Whole to search for objects in the full match mode. Select the check box next to Case Sensitive to enable the keyword search in the case-sensitive mode. Click Search to search for the topological object. The required topological object is successfully searched out. All the matching records are successfully displayed in the list. Click Locate to NE and a single NE is located. Click Locate to Topo and the node in the topology view is located.

Test Procedure

1. 2. 3. 4. 5. 6. 7.

Expected Results

1. 2. 3.


None. T01-0106

T01-0107 Customizing the Topology ViewObjective Test Networking Diagram Prerequisites

To test the function of customizing the topology view. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be NEs or subnets in the topology view.

Issue 01 (2010-07-31)


4



Test Procedure

1. 2. 3.

Choose View > Creating > Custom View from the main menu. On the General tab page, enter a name in the Name text box and remarks in the Remarks text box. Choose Topology. The Select Object window is displayed. In the topology view, select the required NE(s) or subnet(s), right-click, choose Select from the shortcut menu, and then click Finish. Click NE List. The Select Object window is displayed. Select the required NE(s) or subnet(s) and then click OK to exit the window. Click OK. The Create Custom View dialog box is closed. In the Confirm dialog box, click Yes to switch to the newly created custom view. The custom view is successfully created. You can switch to the newly created view successfully. You can successfully switch to other views by selecting them in the Current View drop-down list box.

4. 5.Expected Results

1. 2. 3.


None. T01-0107

T01-02 Topology AlarmsT01-0201 Viewing Current Alarms of an NEObjective Test Networking Diagram Prerequisites

To test the function of viewing current alarms of an NE. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable NEs in the topology view of the U2000.


In the navigation tree or topology view, select an NE, right-click, and then choose Browse Current Alarms from the shortcut menu. The Browse Current Alarms window is correctly displayed. All current alarms (if any) of the NE are successfully displayed. None. T01-0201

T01-0202 Synchronizing Current Alarms of an NEObjective Test Networking

To test the function of synchronizing current alarms of an NE. None.

Issue 01 (2010-07-31)


5



Diagram Prerequisites

1. 2. 3.

The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable NEs in the topology view of the U2000.

Test Procedure Expected Results

In the navigation tree or topology view, select an NE, right-click, and then choose Synchronize Current Alarms from the shortcut menu. 1. The progress bar indicating the alarm synchronization status is displayed. After the synchronization is completed, the Operation Result dialog box is displayed. If the operation fails, the details about the failure are displayed. All alarms of the NE are successfully synchronized onto the U2000.

2.Remarks Internal Number

If there is a large amount of alarm data, the synchronization may take quite a while. T01-0202

T01-0203 Acknowledging Alarms of an NEObjective Test Networking Diagram Prerequisites

To test the function of acknowledging alarms of an NE. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable NEs in the topology view of the U2000.

Test Procedure Expected Results

In the navigation tree or topology view, select an NE, right-click, and then choose Acknowledge Alarms from the shortcut menu. 1. 2. The alarms of the NE are successfully acknowledged and the Operation Result dialog box is displayed indicating that the operation is successful. In the Browse Current Alarms window, the acknowledgment status, acknowledgment time, and acknowledgment user are displayed. In addition, after the acknowledgment, the cleared alarms are successfully moved to the history alarm library.

Remarks

Before acknowledging alarms, you need to view the current alarms of the NE and note down the cleared and uncleared alarms. In this way, you can check whether the cleared alarms are successfully moved to the history alarm library after they are acknowledged. T01-0203

Internal Number

Issue 01 (2010-07-31)


6



T02 Fault ManagementT02-01 Alarm BrowsingT02-0101 Viewing Alarms and EventsObjective Test Networking Diagram Prerequisites

To test the function of viewing current and history alarms and events. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Browse Current Alarms, Fault > Browse History Alarms, Fault > Browse Alarm Logs, or Fault > Browse Event Logs from the main menu. In the Filter dialog box that is displayed, enter the parameters and click OK. The windows for browsing the current alarms, history alarms, or alarm logs or event logs are displayed. Click Filter, specify the filter criteria in the Filter dialog box, and then click OK. The Filter dialog box is successfully displayed. The information about current alarms, history alarms, and alarm logs or event logs is correctly displayed. The information about current alarms, history alarms, alarm logs, or event logs is correctly displayed according to different filter criteria.

Test Procedure

1.

2.Expected Results

1. 2. 3.


The Browse Current Alarms window can display only a limited number of alarms. When the total alarms exceed the limit, the earliest alarms are deleted from the window. ATPT02-0101

T02-0102 Collecting the Alarm/Event Log StatisticsObjective Test Networking Diagram Prerequisites

To test the function of collecting alarm or event log statistics. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable NEs and some current and history alarms of the NEs on the U2000. Choose Fault > Query Alarm Log Statistics or Fault > Query Event Log Statistics from the main menu. Choose Template > New. In the Add Template dialog box, set parameters for the template and then click OK.

Test Procedure

1. 2.

Issue 01 (2010-07-31)


7




Click Statistic Filter. Set parameters and then click OK. Click the Pie tab and query the pie chart of alarm or event logs. The template is successfully added and the alarm or event logs that statistics are collected for according to the template are correct. The U2000 can collect statistics about the number of alarms, average acknowledgment time, and average clear time respectively according to the statistic filter criteria and ensure that the statistics are correct. The pie chart of the alarm/event logs is correctly displayed.

1. 2.


None. T02-0102

T02-0103 Synchronizing Networkwide AlarmsObjective Test Networking Diagram Prerequisites

To test the function of synchronizing networkwide alarms. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Browse Current Alarms from the main menu. Click Synchronize. The Browse Current Alarms window is correctly displayed. The alarms that meet the filter criteria are successfully displayed in the window. The alarms are successfully synchronized. The alarms on the U2000 are consistent with alarms on NEs.

Test Procedure

1. 2.

Expected Results

1. 2.


None. T02-0103

T02-0104 Stopping the Alarm SoundObjective Test Networking Diagram Prerequisites

To test the function of stopping the alarm sound. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 client successfully. The function of alarm report and alarm sound indication must be enabled. Choose Fault > Stop the Alarm Sound Permanently from the main menu. Choose Fault > Stop the Current Alarm Sound from the main menu.

Test Procedure

1. 2.

Issue 01 (2010-07-31)


8



Expected Results

1. 2.

The current alarm sound stops and there are no alarm sounds for any alarm reported in the future. The current alarm sound stops but there will be alarm sounds for alarms reported in the future.


None. T02-0104

T02-0105 Locating an Alarm in the Topology ViewObjective Test Networking Diagram Prerequisites

To test the function of locating an alarm in the topology view. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be some current and history alarms on NEs. Choose Fault > Browse Current Alarms from the main menu. Select an alarm, right-click, and then choose Locate in Topology from the shortcut menu. Select an alarm, right-click, and then choose Locate to NE Panel from the shortcut menu. The corresponding NE icon is correctly located in the topology view. The corresponding NE panel is successfully displayed.

Test Procedure

1.


1. 2.


On a local computer, only topological objects can be located for the U2000 alarms. T02-0105

T02-0106 Setting the Colors for the Alarm Severity IndicatorObjective Test Networking Diagram Prerequisites

To test the function of setting the colors for the alarm severity indicator. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be alarms of different severities on the U2000. Choose File > Preferences from the main menu. In the dialog box that is displayed, click Color Settings in navigation tree. Modify the colors for alarms of different severities.

Test Procedure

1. 2.

Issue 01 (2010-07-31)


9




View the colors of alarm indicators for NEs in the topology view. Choose Fault > Browse Current Alarms from the main menu. In the Browse Current Alarms window, view the severities of alarms. The alarm indicators for NEs in the topology view are displayed in colors that are consistent with the settings. In the Browse Current Alarms window, the severities of alarms are displayed in colors that are consistent with the settings.

1. 2.


None. T02-0106

T02-0107 Displaying Sorted AlarmsObjective Test Networking Diagram Prerequisites

To test the function of displaying sorted alarms. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Alarms of different severities must exist on the U2000.


Choose Fault > Browse Current Alarms . View the values in the Occurrence column in the alarm list. The number of sorted alarms is displayed in the Occurrence column in the alarm list. None. T02-0107

T02-0108 Checking the Reliability of Alarms (IP)Objective Test Networking Diagram Prerequisites

To test the function of checking the reliability of alarms (IP). None. 1. 2. 3. The triggered alarm must be the ADAC alarm. The number of the port that receives traps must be x. The command line snmp-agent target-host trap address udp-domain $U2000 server IP address params securityname public $version private-netmanager must be configured on the equipment. The NE version must be V500R007C03 or later. Send an alarm from the equipment to the U2000. Change the number of the port that transmits packets to a non-x value.

4.Test Procedure

1. 2.

Issue 01 (2010-07-31)


10



3. 4. 5.Expected Results

Send the second alarm to the U2000 from the same NE again (Step 2 and 3 simulate the case where the packets are lost). Change the number of the port that transmits packets to an x value. Send the third alarm to the U2000 from the same NE. The U2000 receives the third alarm successfully. The second alarm is synchronized to the U2000 in real time. The alarm information is consistent with the actual information.

1. 2. 3.


None. T02-0108

T02-02 Alarm SettingsT02-0201 Acknowledging Alarms AutomaticallyObjective Test Networking Diagram Prerequisites

To test the function of acknowledging alarms automatically. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be some current alarms on the U2000. Choose Fault > Settings > Options from the main menu. The Alarm Option dialog box is displayed. Choose Auto Acknowledge from the navigation tree. Set the parameters for automatic alarm acknowledgment and click OK.

Test Procedure

1. 2.


Automatic alarm acknowledgement is successfully set. The cleared alarms are acknowledged automatically according to the settings. You can choose Auto acknowledge by severity or Auto acknowledge by rule respectively. T02-0201

T02-0202 Synchronizing Alarms AutomaticallyObjective Test Networking Diagram Prerequisites

To test the function of synchronizing alarms automatically. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights.

Issue 01 (2010-07-31)


11



Test Procedure

1. 2.

Choose Fault > Settings > Options from the main menu. The Alarm Option dialog box is displayed. Choose Auto Acknowledge from the navigation tree in the left pane. Set the conditions for automatic alarm synchronization and click OK.


Automatic alarm synchronization is successfully set. When the preset trigger conditions are met, alarms are synchronized automatically. None. T02-0202

T02-0203 Setting Fault Diagnosis RulesObjective Test Networking Diagram Prerequisites

To test the function of setting fault diagnosis rules. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Settings > Fault Diagnosis Rules from the main menu. Click Export to export the fault diagnosis rules as a file in the .csv format. Click Import and to import the fault diagnosis rules that have been edited as a file in the .csv format. Then click Apply. The fault diagnosis rules are successfully exported in the .cvs format. The fault diagnosis rules that have been edited are successfully imported and the rules are correctly displayed in the Fault Diagnosis Rules window.

Test Procedure

1. 2. 3.

Expected Results

1. 2.


None. T02-0203

T02-0204 Redefining an Alarm or EventObjective Test Networking Diagram Prerequisites

To test the function of redefining an alarm or event. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Settings > Redefine from the main menu. In the Redefine window, click New. A dialog box is displayed. On the Basic Setting tab page, set the name, type and severity of the alarm that

Test Procedure

1. 2. 3.

Issue 01 (2010-07-31)


12



needs to be redefined. 4. 5.Expected Results

On the Alarm/Event Source tab page, select the NE to be redefined and then click OK. Select a piece of redefinition in the window and click Delete. In the Confirm dialog box, click Yes. The alarm or event is redefined successfully. For the redefined alarm or event that is newly reported, the related parameters are changed according to the settings. The redefinition of the alarm or event is successfully deleted.

1. 2. 3.


None. T02-0204

T02-0205 Masking an NE Alarm or EventObjective Test Networking Diagram Prerequisites

To test the function of masking an NE alarm or event. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Settings > Mask Rule from the main menu. Click Alarm Mask Rule and choose Add. The Add Alarm Mask Rule dialog box is displayed. On the Basic Setting tab page, set the name, severity and type of the alarm. On the Alarm Source tab page, set the NE or NE type that needs to mask the alarm. Click Next to set the effective time, alarm duration and remarks and then click Finish. Click Event Mask Rule and choose Add. On the Basic Setting tab page, set the name, severity and type of the event. On the Event Source tab page, set the NE or NE type that needs to mask the event. Click Next to set the effective time, event duration and remarks and then click Finish. In the Mask Rule window, select an alarm or event mask rule and click Delete. In the Confirm dialog box, click Yes. The alarm mask rule and event mask rule are successfully set. For the newly reported NE alarm or event with mask rule, the alarm or event is not displayed on the U2000. The alarm or event mask rule that has been set are successfully deleted.

Test Procedure

1. 2.

3.

4.Expected Results

1. 2. 3.


None. T02-0205

Issue 01 (2010-07-31)


13



T02-0206 Analyzing the Alarm CorrelationObjective Test Networking Diagram Prerequisites

To test the function of analyzing the alarm correlation. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Correlation Analysis > Trail Alarm Correlation Rules from the main menu. Click Create. A new analysis rule is added to the window. Modify the attributes of the rule and click Apply. Select a piece of alarm correlation analysis and click Delete. Choose Fault > Correlation Analysis > Analyze Trail Alarm Correlation from the main menu. Specify the alarm to be analyzed and click OK. Choose Fault > Alarm Correlation > Fiber Relating Alarm from the main menu. Set the correlation status of the fiber relating alarm and click Apply. The trail alarm correlation rules are successfully created or deleted. The rules for trail alarm correlation analysis are successfully set. The correlation status of fiber relating alarms is successfully set.

Test Procedure

1. 2. 3. 4. 5. 6. 7.

Expected Results

1. 2. 3.


None. T02-0206

T02-0207 Setting the NE Alarm Attribute TemplateObjective Test Networking Diagram Prerequisites

To test the function of setting the NE alarm attribute template. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Fault > Settings > NE Alarm Attribute Template from the main menu. Modify the severity, automatic reporting status, and suppression status of an alarm. Then click Save As, enter a name, and click OK. Click Apply to. Select the alarm attributes and the applicable NEs, and click OK. The NE alarm attribute template is successfully set. The alarm attributes of the applicable NEs are consistent with the settings in the alarm attribute template.

Test Procedure

1. 2. 3.

Expected Results

1. 2.

Remarks

None.

Issue 01 (2010-07-31)


14



Internal Number

T02-0207

T02-0208 Setting the Maintenance ExperienceObjective Test Networking Diagram Prerequisites

To test the function of setting the maintenance experience. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. The U2000 must communicate normally with the equipment. Choose Fault > Settings > Maintenance Experience from the main menu. In the Maintenance Experience window, select an alarm or event. Click Modify, enter the correct maintenance information, and then click OK. Click Export. In the Export Experience window, set the file path and export scope to export the experience documents. Click Import. Set the file path and import mode to import the maintenance experience documents that have been edited. The maintenance experience documents are successfully exported. The maintenance experience documents are successfully imported. The maintenance information of alarms is successfully modified. The maintenance experience documents are exported in the client/report directory by default. The export maintenance experience documents are in the .txt, .csv, .html, .xml, .xls, or .pdf format.

Test Procedure

1. 2. 3. 4.

Expected Results

1. 2. 3.

Remarks

1. 2.

Internal Number

T02-0208

T02-03 Alarm or Event DumpT02-0301 Dumping Alarms or Events ManuallyObjective Test Networking Diagram Prerequisites

To test the function of dumping alarms or events manually. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable equipment and some history alarms or events on the U2000.

Issue 01 (2010-07-31)


15



Test Procedure

1. 2.

Choose Administration > Task Schedule > Task Management from the main menu. Choose Task Type > Manual Dump > Event Manual Dump from the navigation tree. Click New. In the New Task dialog box, set the task name, task type, run type and time, and then click Finish. Choose Task Type > Manual Dump > Alarm Manual Dump from the navigation tree. Click New. In the New Task dialog box, set the task name, task type, run type and time, and then click Finish. Select a manual dump task that has been created, right-click, and then choose Run. Set the file type, the generation time of alarm data, and the record that meets the dump conditions. Then click Dump to perform the dump task. The event manual dump or alarm manual dump task can be successfully created. The event is successfully dumped in the U2000InstallationPath/server/var/EventManualDump/FM directory and the alarm is successfully dumped in the U2000InstallationPath/server/var/AlarmManualDump/FM directory. It may take a long time to dump alarms or events when there are many alarms or events. Only the history alarms can be dumped. After the alarms or events are dumped, the alarm or event data is deleted from the database of the U2000.

3.

4.

Expected Results

1. 2.

Remarks

1. 2. 3.

Internal Number

T02-0301

T02-0302 Dumping Alarms or Events AutomaticallyObjective Test Networking Diagram Prerequisites

To test the function of dumping alarms or events automatically. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable equipment and some history alarms or events on the U2000. Choose Administration > Task Schedule > Task Management from the main menu. Choose Database Capacity Management > Alarm or Database Capacity Management > Event Log Dump from the navigation tree. Click New. In the New Task dialog box, set the task name, task type, run type and time and then click Finish. Select a manual dump task that has been created, right-click, and choose Run At Once to perform the alarm or event dump task. The automatic alarm dump or event dump task can be successfully created. The alarms or events that meet conditions are dumped periodically. The dump file

Test Procedure

1. 2.

3.Expected Results

1. 2.

Issue 01 (2010-07-31)


16



format and the dump period are correct.Remarks

1. 2. 3.

The automatic dump period for alarms or events is long. Hence, it may take a long time to test this function. Only the history alarms can be automatically dumped. If automatic deletion of dump files is enabled, the dumped data in the U2000 database is cleared according to the settings.

Internal Number

T02-0302

T02-0303 Saving Alarms or Events as a FileObjective Test Networking Diagram Prerequisites

To test the function of saving alarms or events as a file. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be alarms or events on the U2000. Choose Fault > Query Alarm Log Statistics or Fault > Query Event Log Statistics from the main menu. In the window that is displayed, click Save As. In the Save As dialog box, set the file path, file name and file type of the query result to be saved. Click Save to save the query results as a file in the specified path.

Test Procedure

1. 2. 3.


The query results that meet the conditions are successfully saved as a file in the specified path. None. T02-0303

T03 Inventory ManagementT03-01 Physical InventoryT03-0101 Managing NEsObjective Test Networking Diagram Prerequisites

To test the function of managing NEs. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and

Issue 01 (2010-07-31)


17



operation rights. 3.Test Procedure

There must be manageable equipment on the U2000. Choose Inventory > Physical Inventory > NE from the main menu. The NE list is displayed. In the filter drop-down list, select All Records. Alternatively, click Filter, specify the filter criteria, and then click OK. On the NE List tab page, select a record and click Query to query the details about the NE. Select one or more records, right-click, and then choose Set User Label from the shortcut menu. In the dialog box that is displayed, set a custom label. On the NE Statistics tab page, select the statistics type from the Statistics Type drop-down list box and click Count. On the Equivalent NE Statistics tab page, click Count. On the NE List, NE Statistics, or Equivalent NE Statistics tab page, click Print to print the selected record(s). On the NE List, NE Statistics, or Equivalent NE Statistics tab page, click Save As. In the Save As window, set the start row and end row of the query result to be saved. In the File name field, enter the path for saving the file and click set the file name and file type. Then, click OK. to

1. 2. 3. 4. 5. 6. 7. 8.

Expected Results

1. 2. 3. 4. 5. 6.

On the NE List tab page, all records are displayed. Alternatively, all records that meet the filter criteria are displayed. The NE information is successfully queried. In addition, the information on the NE is consistent with the information on the U2000. A custom label is successfully set. The collection of NE statistics according to the selected type is correctly performed. The equivalent NE statistics are correctly displayed. The records that meet the conditions are saved to the specified directory.


Only the NE that supports query from the NE can be queried. T03-0101

T03-0102 Managing BoardsObjective Test Networking Diagram Prerequisites

To test the function of managing boards. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable equipment on the U2000 and the equipment must be configured with boards. Choose Inventory > Physical Inventory > Board from the main menu. The board

Test Procedure

1.

Issue 01 (2010-07-31)


18



list is displayed. 2. 3. 4. 5. 6. 7. In the filter drop-down list, select All Records. Alternatively, click Filter, specify the filter criteria, and then click OK. On the Board List tab page, select a record and click Query to query details about the board. Select one or more records, right-click, and then choose Set User Label from the shortcut menu. In the dialog box that is displayed, set a custom label. On the Board Statistics tab page, select the statistics type from the Statistics Type drop-down list box and click Count. On the Board List or Board Statistics tab page, click Print to print the selected record(s). On the Board List or Board Statistics tab page, click Save As. In the Save As window, set the start row and end row of the query result to be saved. In the File name field, enter the path for saving the file and click and file type. Then, click OK.Expected Results

to set the file name

1. 2. 3. 4. 5. 6.

On the Board List tab page, all records are displayed. Alternatively, all records that meet the filter criteria are displayed. The detailed information and the subboard and port information about each record are correctly displayed. The Board information is successfully queried. In addition, the card information on the NE is consistent with the card information on the U2000. A custom label is successfully set. The card statistics about the selected card type are correctly collected. The records that meet the conditions are saved to the specified directory.


Only the board that supports query from the NE can be queried. T03-0102

T03-0103 Managing PortsObjective Test Networking Diagram Prerequisites

To test the function of managing ports. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be manageable equipment on the U2000 and the equipment must be configured with cards and ports. Choose Inventory > Physical Inventory > Port from the main menu. The port list is displayed. On the Port List tab page, select the port type; on the NE Type tab page, select the NE type. Click Filter to specify the filter criteria and then click Query. On the Port Statistics tab page, click to set the NE object and then click

Test Procedure

1. 2. 3.

Issue 01 (2010-07-31)


19



Count. 4. 5. On the Port Statistics tab page, click Print to print the selected record(s). In the Port List, right-click and choose Save As from the shortcut menu. In the Save As window, set the start row and end row of the query result to be saved. In the File name field, enter the path for saving the file and click name and file type. Then, click OK.Expected Results

to set the file

1. 2.

The qualified port information is displayed according to the service type at the port, NE type, and filter criteria. The records that meet the conditions are saved to the specified directory.


For NEs of different domains, their ports are displayed differently. T03-0103

T04 NMS Security ManagementT04-01 Security ManagementT04-0101 Managing UsersObjective Test Networking Diagram Prerequisites

To test the function of managing users. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > NMS Security > NMS User Management from the main menu. View information about a single user: Select a user from the navigation tree. Then, in the right pane, click the General, User Group, ACL, Domain, or Operation Rights tab respectively to view the information about the user. Create a user: Right-click Users in the navigation tree and choose New User from the shortcut menu. In the New User dialog box, enter the user name and password and set the parameters. Then click OK or Apply. Set general attributes of a user: Select a user from the navigation tree. On the General tab page in the right pane, set the general attributes of a user as follows: Full name, Description, User account is disabled, Maximum validity period of the password (days), User cannot change password, Maximum of online users, Inactive user policy and Login duration. Set the user group of a user: Select a user from the navigation tree. On the User Group tab page in the right pane, click Add. In the Add User Group dialog box, select a user group and click OK. Alternatively, on the User Group tab page, select the user group of a user and click Delete. In the Confirm dialog box, click Yes. Set ACL of a user: Select a user from the navigation tree. On the ACL tab page in

Test Procedure

1. 2.

3.

4.

5.

6.

Issue 01 (2010-07-31)


20



the right pane, select Set ACL and click Add. In the window that is displayed, set related parameters and then click Apply. Alternatively, select Use the Current User ACL and set the IP addresses that can be used to access the current server. 7. Set the domain of a user: Select a user from the navigation tree. On the Domain tab page in the right pane, click Select. In the Select User Domain dialog box, select the NE, NE sets, and subnets to be added to the domain and click OK. Alternatively, select the NEs, object sets, and subnets and the NE types to be deleted from the domain and click OK. Delete a user: Select a user from the navigation tree, right-click, and then choose Delete from the shortcut menu. In the Confirm dialog box, click Yes. The user is successfully created. The user is added to the U2000. The general attributes of the user are successfully set. The user group of the user is successfully set. The ACL of the user is successfully set. The domain of the user is successfully set. The operation rights of a user are successfully set. The user password is successfully modified. The old password is required for the modification of the password of the current user. The user is successfully deleted. The deleted user is no longer displayed in the user list and the user no longer exists on the U2000. The name of the user to be created must be unique. Only the user that has rights to manage all user groups can create a user that belongs to no group. The default user administrator cannot be deleted. Only user administrator can delete the user that has security operation rights. When the rights of an online user are set, the U2000 broadcasts the message to the online user. Only user administrator can assign the security operation rights to other users. The password for the new user must meet the requirements on the password policy. The user can set the password policy as follows: Choose Administration > NMS Security Settings > Security Policies from the main menu. On the Password Policy tab page, set the policies. Only the user that has rights to manage all user groups can set the attributes of Managed user groups of a user. If a user has rights to manage a user group, the user has rights to manage all users in the user group.

8.Expected Results

1. 2. 3. 4. 5. 6. 7. 8.

Remarks

1. 2. 3. 4. 5.

6.

Internal Number

T04-0101

T04-0102 Managing User GroupsObjective Test Networking Diagram Prerequisites

To test the function of managing user groups. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights.

Issue 01 (2010-07-31)


21



Test Procedure

1. 2. 3.

Choose Administration > NMS Security > NMS User Management from the main menu. Query information about all user groups: Click User Groups in the navigation tree. Then, in the right pane, view the brief information about the managed user groups. Query information about a single user group: Click a user in the navigation tree. Then, in the right pane, click the General, Members, Domain, Operation Rights, or Current Session tab to view the information about the user group. Create a user group: Right-click the User Group in the navigation tree and choose New User Group from the shortcut menu. In the New User Group dialog box, enter the name and description. Then click OK or Apply. Set the general attributes of a user group: Select a user group from the navigation tree. On the General tab page in the right pane, set the general attributes of the user group, such as name and description. Manage the members of a user group: Select a user group from the navigation tree. On the Members tab page in the right pane, add or delete members of the user group. Set the operation rights of a user group: Select a user group from the navigation tree. On the Operation Rights tab page in the right pane, click Select. In the Find Operation Rights dialog box, select Operation Set and Operation. If there are operation objects, select the objects from the Operation Object field and select the specific authorized rights in the right pane. Then click OK. Alternatively, select the operation rights to be deleted and click Delete. In the Confirm dialog box, click Yes. Set the domain of a user group: Select a user group from the navigation tree. On the Domain tab page in the right pane, click Select. In the Select Domain dialog box, select the object sets and subnets to be added to the domain and click OK. Alternatively, clear the object sets and subnets that need not be added into the domain. In the Confirm dialog box, click Yes. Delete a user group: Right-click a user group in the navigation tree and choose Delete from the shortcut menu. In the Confirm dialog box, click Yes. The information about all managed user groups is successfully queried. The information about a single user group is successfully queried. The user group is successfully created. The new user group is displayed in the user group list and is added to the U2000. The general attributes and members of a user group are successfully set. The operation rights and domain of a user group are successfully set. The user group is successfully deleted. The deleted user group is no longer displayed in the user group list and no longer exists on the U2000.

4.

5.

6.

7.

8.

9.Expected Results

1. 2. 3. 4. 5. 6.

Remarks

The name of the user group to be created must be unique. 1. 2. 3. The user group named all user groups cannot be created. Only user administrator can assign the security operation rights to other users. The user that has rights to manage certain user groups can add or delete members of a non-security user group. In other cases, only a user that has rights to manage all user groups can perform operations on the user group. The U2000 provides some user groups by default. These default user groups are the same as the ordinary user groups, except that they are preconfigured during the installation.

4.

Issue 01 (2010-07-31)


22



5.Internal Number

If the user belongs to a certain user group, the user cannot modify the attributes of the user group.

T04-0102

T04-0103 Managing Operation SetsObjective Test Networking Diagram Prerequisites

To test the function of managing operation sets. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > NMS Security > NMS User Management from the main menu. Create an operation set: Right-click the Operation Set in the navigation tree and choose New Operation Set from the shortcut menu. In the New Operation Set dialog box, enter the name and description and select Type. Then click OK or Apply. Modify an operation set: Select an operation set from the navigation tree. On the Details tab page in the right pane, set the name and description. On the Members tab page, add or delete members of the operation set. Delete an operation set: Right-click an operation set in the navigation tree and choose Delete from the shortcut menu. In the Confirm dialog box, click Yes. The operation set is successfully created. The new operation set is displayed in the operation set list and is added to the U2000. The general attributes and members of the operation set are successfully modified. The operation set is successfully deleted. The deleted operation set is no longer displayed in the operation set list and the no longer exists on the U2000. The name of the operation set to be created must be unique. The U2000 provides some operation sets by default. These default operation sets are the same as the ordinary operation sets, except that they are preconfigured during the installation. Only the user administrator can assign the security operation rights and delete the operation sets of security subtype.

Test Procedure

1. 2.

3.

4.Expected Results

1. 2. 3.

Remarks

1. 2.

3.Internal Number

T04-0103

T04-0104 Managing Object SetsObjective Test Networking Diagram

To test the function of managing object sets. None.

Issue 01 (2010-07-31)


23



Prerequisites

1. 2.

The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > NMS Security > NMS User Management from the main menu. Create an object set: Right-click Object Set in the navigation tree and choose New Object Set from the shortcut menu. In the New Object Set dialog box, enter the name and description. Then click OK or Apply. Modify an object set: Select the object set from the navigation tree. On the General tab page in the right pane, set the description. On the Members tab page, add or delete members of the object set. Delete an object set: Right-click the object set in the navigation tree and choose Delete from the shortcut menu. In the Confirm dialog box, click Yes. The object set is successfully created. The new object set is displayed in the object set list and is added to the U2000. The general attributes and members of the object set are successfully modified. The object set is successfully deleted. The deleted object set is no longer displayed in the object set list and no longer exists on the U2000.

Test Procedure

1. 2.

3.

4.Expected Results

1. 2. 3.


The name of the object set to be created must be unique. T04-0104

T04-0105 Managing the ACL ListObjective Test Networking Diagram Prerequisites

To test the function of managing the ACL list. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > NMS Security > ACL from the main menu. Alternatively, choose Administration > NMS User Management from the main menu. In the NMS User Management window, click Users in the Security Object navigation tree, select a user, and then click the ACL tab in the right pane. In the dialog box for ACL settings, select User Administration ACL or Use User ACL and click Set ACL. In the dialog box that is displayed, add the IP addresses or IP range and click Apply.

Test Procedure

1.

2.


The ACL list is successfully refreshed. The user cannot log in to the U2000 through an IP address that is not included in the ACL list. T04-0105

Issue 01 (2010-07-31)


24



T04-02 Client Access ControlT04-0201 Locking and Unlocking a ClientObjective Test Networking Diagram Prerequisites

To test the functions of locking and unlocking a client. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Lock a client: Choose File > Lock Terminal from the main menu to lock a client. Unlock a client: In the Locked dialog box, press Ctrl+Alt+U according to the instructions. In the Unlock dialog box, enter the password and click OK. The client is successfully locked and the user cannot perform any operation on the client. The client is successfully unlocked and the user can perform operations on the client again.

Test Procedure

1. 2.

Expected Results

1. 2.


None. T04-0201

T04-0202 Setting the Automatic Lock Time of the ClientObjective Test Networking Diagram Prerequisites

To test the function of setting the automatic lock time of the client. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose File > Preferences from the main menu. In the dialog box that is displayed, choose Lock Settings from the navigation tree. Set the automatic lock time of the client: In the Locking Interval area, select the check box next to Automatically locked, set the time in the line below, and then click OK. Cancel an automatic lock: In the Locking Interval area, clear the check box next to Automatically locked and click OK. The automatic lock time of the client is successfully set. The client is automatically locked after the specified period of inactivity. The automatic lock of the client is successfully canceled. The client is not locked automatically.

Test Procedure

1. 2.

3.Expected Results

1. 2.

Remarks

None.

Issue 01 (2010-07-31)


25



Internal Number

T04-0202

T04-0203 Forcing a User to ExitObjective Test Networking Diagram Prerequisites

To test the function of forcing a user to exit. None. 1. 2. 3. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. There must be another online client except the current client on the U2000. Log in to the U2000 as a super user. Choose Administration > NMS Security > Monitor User Session from the main menu. In the session monitor list, select a user, right-click, and then choose Force User to Exit. Alternatively, select a user and click Force User to Exit. In the Confirm dialog box, click Yes.

Test Procedure

1. 2.

Expected Results Remarks

The user is forced to exit successfully, and the client that the user logs in to is forced to exit. 1. 2. A user cannot force itself to exit. User administrator cannot be forced to exit.

Internal Number

T04-0203

T05 NMS Log ManagementT05-01 NMS Operation LogsT05-0101 Viewing the U2000 LogsObjective Test Networking Diagram Prerequisites

To test the function of viewing the U2000 logs. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > Log Management > Query Operation Logs, Administration > Log Management > Query System Logs, or Administration > Log Management > Query Security Logs from the main menu. In the Filter dialog box, specify the filter criteria. Then click OK to view the logs.

Test Procedure

1.

2.

Issue 01 (2010-07-31)


26



3.

In the Query Operation Logs, Query System Logs or Query Security Logs window, select one or more logs, right-click and then choose Details from the shortcut menu to view details about the logs.

Expected Results

Logs are successfully queried and displayed according to different query conditions. Details of the logs can be queried successfully.


The NMS logs consist of operation logs, security logs, and system logs. For details on the operations, see the "Test Procedure" and "Expected Results". T05-0101

T05-02 Log StorageT05-0201 Saving and Dumping NMS Logs as a FileObjective Test Networking Diagram Prerequisites

To test the functions of saving and dumping NMS logs as a file. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > Log Management > Query Operation Logs, Administration > Log Management > Query System Logs, or Administration > Log Management > Query Security Logs from the main menu and specify the filter criteria to display the required logs. In the log list, right-click and choose Save Appoint Records from the shortcut menu. In the dialog box that is displayed, enter the start row, end row, file name, and file type, and then click OK.

Test Procedure

1.

2.


Logs are saved successfully and the specified logs are saved as a file in the specified path. There are three items on the shortcut menu, Save All Records, Save Selected Records, and Save Appoint Records. T05-0201

T06 Database Backup ManagementT06-01 Database BackupT06-0101 Backing Up and Restoring the DatabaseObjective

To test the function of backing up the database.

Issue 01 (2010-07-31)


27



Test Networking Diagram Prerequisites

None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Administration > Database > Database Backup from the main menu. In the Backup field, enter the backup path and click Backup.

Test Procedure

1. 2.


The data of the database is successfully backed up to the specified directory. The backup operation is time-consuming. Therefore, wait patiently during the backup. T06-0101

T07 NMS License ManagementT07-01 NMS LicenseT07-0101 Querying the LicenseObjective Test Networking Diagram Prerequisites

To test the function of querying the license. None. 1. 2. The U2000 must work in the normal state. You must have logged in to the U2000 and have the related management and operation rights. Choose Help > License Information from the main menu. The About window is displayed. Click the License Control Item and Function Control Item tabs respectively to view the license information.

Test Procedure

1. 2.


The license information about the U2000 is correctly displayed. None. T07-0101

Issue 01 (2010-07-31)


28



T08 System Monitoring and ManagementT08-01 System MonitoringT08-0101 Querying and Maintaining Process ParametersObjective Test Networking Diagram Prerequisites

To test the functions of querying and maintaining process parameters. None. 1. 2. The server must have been started and available for use. The system monitor process must have been started. Start the System Monitor client. Then, click the Process Monitor tab after successful login. Right-click a service process and choose Details from the shortcut menu. In the Process Details dialog box, view the parameter information about the process. Right-click a service process and choose Start Mode > Automatic from the shortcut menu. Stop the service process selected in Step 3. Select a running service process, right-click, and then choose Start Mode > Manual from the shortcut menu. Stop the service process selected in Step 5. Right-click the service process selected in Step 5 and choose Start the Process from the shortcut menu. Select a running service process, right-click and then choose Start Mode > Disabled from the shortcut menu. Right-click the service process selected in Step 8 and choose Stop the Process from the shortcut menu. After Step 3, the start mode of the selected service process is changed to Automatic. After Step 4, the stopped service process is automatically started. After Step 5, the start mode of the selected service process is changed to Manual. After Step 6, the stopped service process is not automatically started. After Step 7, the stopped service process is started. After Step 8, the start mode of the selected service process is changed to Disabled. After Step 9, the selected service process is stopped.

Test Procedure

1. 2. 3. 4. 5. 6. 7. 8. 9.

Expected Results

1. 2. 3. 4. 5. 6. 7.


None. T08-0101

T08-0102 Querying and Maintaining the System Monitoring ParametersObjective

To test the functions of querying and maintaining the system monitoring parameters.

Issue 01 (2010-07-31)


29



Test Networking Diagram Prerequisites Test Procedure

None. The server must have been started and available for use. 1. 2. 3. Start the System Monitor client. Then, click the Process Monitor tab after successful login. Choose Administration > Settings from the main menu. In the Monitor Settings dialog box, view the system monitoring parameters. Click the Server Monitor tab. Then, set the thresholds of the number of continuous CPU overloads, refreshing interval of server monitoring, and server monitoring thresholds. Click the Hard Disk Monitor tab. Then, set the refreshing interval of hard disk monitoring and hard disk monitoring thresholds. Click the Database Monitor tab. Then, set the refreshing interval of database monitoring and database space usage thresholds. Click the Process Monitor tab. Then, set the refreshing interval of process monitoring. Query the information about the server, process, database, and hard disk and check whether it is the same as the preset values. The information about the system monitoring parameters is correctly displayed. The information about the server, process, database, and hard disk is refreshed according to the preset refreshing intervals. When the resource utilization exceeds the threshold, the corresponding resource records on the database information, system resource information, and hard disk information tab pages are displayed in red. When the occupancy of the CPU, memory, hard disk, or database exceeds the preset threshold, the corresponding alarm is reported to the U2000.

4. 5. 6. 7.Expected Results

1. 2. 3.


None. T08-0102

T08-0103 Shutting Down the U2000 ServerObjective Test Networking Diagram Prerequisites

To test the function of shutting down the U2000 server. None. 1. 2. The server must have been started and available for use. The system monitor process must have been started. Start the System Monitor client. Then, choose Administration > Stop All NMS Services from the main menu after successful login. In the Confirm dialog box, click No. Repeat the operation in Step 1. In the Confirm dialog box, click Yes.

Test Procedure

1. 2. 3. 4.

Issue 01 (2010-07-31)


30



Expected Results

1. 2.

After Step 2, the U2000 remains unchanged. After Step 4, the U2000 is shut down. On the Process tab page, the status of all U2000 server p

Documents

iManager U2000 Acceptance Test Guide For replacing N2000-1