of 1 /1
Editorial Advisory Board K.-J. Bathe Massachusetts Institute of Technology, Cambridge, MA, USA S. Bordas University of Glasgow, United Kingdom C.A. Brebbia Wessex Institute of Tecnhology, Ashurst, Southampton, United Kingdom R. Bru Universidad Polite ´ cnica de Valencia, Spain A.P. Chassiakos University of Patras, Greece R. Citarella Universita ` degli Studi di Salerno, Fisciano (SA), Italy J.Y. Cognard Ecole Nationale Supe ´ rieure d’Inge ´ nieurs, Brest, France M. Cross University of Wales, Swansea, United Kingdom O. von Estorff Technische Universita ¨ t Hamburg-Harburg, Hamburg, Germany D. Eyheramendy E ´ cole Centrale de Marseille, France G.A. Gravvanis Democritus University of Thrace, Xanthi, Greece P. Hajela Rensselaer Polytechnic Institute, Troy, NY, USA O. Hassan Swansea University, United Kingdom S. Herna ´ ndez Universidad de La Coruna, Spain P. Ivanyi University of Pe ´ cs, Hungary P.K. Jimack University of Leeds, United Kingdom J. Kruis C ˇ eske ´ Vysoke ´U ceni Technicke ´ v Praze, Praha, Czech Republic B. Kumar University of Strathclyde, Glasgow, United Kingdom K.H. Law Stanford University, CA, USA M. Leps Czech Technical University, Prague, Czech Republic R.I. Mackie University of Dundee, United Kindgom F. Magoule `s E ´ cole Centrale Paris, France R. Montenegro Armas Universidad de Las Palmas de Gran Canaria, Spain R. Ohayon Conservatoire National des Arts et Me ´ tiers, Paris, France M. Papadrakakis National Technical University, Athens, Greece R. Pusch Geodevelopment International AB, Ideon Science Park, Lund, Sweden M.Y. Rafiq University of Plymouth, United Kingdom E. Ramm Universita ¨ t Stuttgart, Germany J.R. Rice Purdue University, West Lafayette, IN, USA D. Roose Katholieke Universiteit Leuven, Belgium D. Rypl Czech Technical University, Prague, Czech Republic K. Schweizerhof Universita ¨ t Karlsruhe, Germany J. Sienz University of Wales, Swansea, United Kingdom H.D. Simon National Energy Research Scientific Computing Center, Berkeley, CA, USA J. Trevelyan University of Durham, United Kingdom W. Venturini Universidade de Sa ˜o Paulo, Sa ˜ o Carlos, Brazil ADVERTISING INFORMATION If you are interested in advertising or other commercial opportunities please e-mail [email protected] and your enquiry will be passed to the correct person who will respond to you within 48 hours. PUBLICATION INFORMATION Advances in Engineering Software (ISSN 0965-9978). For 2013, volumes 55–66 is scheduled for publication. Subscription prices are available upon request from the Publisher or from the Elsevier Customer Service Department nearest you or from this journal’s website (http://www.elsevier.com/locate/advengsoft). Further information is available on this journal and other Elsevier products through Elsevier’s website (http://www.elsevier.com). Subscriptions are accepted on a prepaid basis only and are entered on a calendar year basis. Issues are sent by standard mail (surface within Europe, air delivery outside Europe). Priority rates are available upon request. Claims for missing issues should be made within six months of the date of dispatch. Orders, claims, and journal enquiries: please contact the Elsevier Customer Service Department nearest you: St. Louis: Elsevier Customer Service Department, 3251 Riverport Lane, Maryland Heights, MO 63043, USA; phone: (877) 8397126 [toll free within the USA]; (+1) (314) 4478878 [outside the USA]; fax: (+1) (314) 4478077; e-mail: [email protected] Oxford: Elsevier Customer Service Department, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK; phone: (+44) (1865) 843434; fax: (+44) (1865) 843970; e-mail: [email protected] Tokyo: Elsevier Customer Service Department, 4F Higashi-Azabu, 1-Chome Bldg, 1-9-15 Higashi-Azabu, Minato-ku, Tokyo 106-0044, Japan; phone: (+81) (3) 5561 5037; fax: (+81) (3) 5561 5047; e-mail: [email protected] Singapore: Elsevier Customer Service Department, 3 Killiney Road, #08-01 Winsland House I, Singapore 239519; phone: (+65) 63490222; fax: (+65) 67331510; e-mail: [email protected] Author enquiries: For enquiries relating to the submission of articles (including electronic submission) please visit this journal’s homepage at http://www.elsevier.com/locate/ades. For detailed instructions on the preparation of electronic artwork, please visit http://www.elsevier.com/artworkinstructions. Contact details for questions arising after acceptance of an article, especially those relating to proofs, will be provided by the publisher. You can track accepted articles at http://www.elsevier.com/trackarticle. You can also check our Author FAQs at http://www.elsevier.com/authorFAQ and/or contact Customer Support via http://support.elsevier.com. ADVANCES IN ENGINEERING SOFTWARE Editors Professor A.K. Noor Old Dominion University Center For Advanced Engineering Environments, ODU Peninsula Higher Education Center 600 Butler Farm Road Room 2228 Hampton, VA 23666, USA Fax: +1 757 766 5246 E-mail: [email protected] Professor B.H.V. Topping University of Pe ´ cs, Hungary and Heriot-Watt University, Edinburgh, UK Tel.: +44 1786 870 191 Fax: +44 1786 870167 E-mail: [email protected]

IFC: Editorial Board/ Publishing Info

  • Upload
    phamque

  • View
    212

  • Download
    0

Embed Size (px)

Citation preview

Editorial Advisory Board

K.-J. BatheMassachusetts Institute of Technology, Cambridge, MA,USA

S. BordasUniversity of Glasgow, United Kingdom

C.A. BrebbiaWessex Institute of Tecnhology, Ashurst, Southampton,United Kingdom

R. BruUniversidad Politecnica de Valencia, Spain

A.P. ChassiakosUniversity of Patras, Greece

R. CitarellaUniversita degli Studi di Salerno, Fisciano (SA), Italy

J.Y. CognardEcole Nationale Superieure d’Ingenieurs, Brest, France

M. CrossUniversity of Wales, Swansea, United Kingdom

O. von EstorffTechnische Universitat Hamburg-Harburg, Hamburg,Germany

D. EyheramendyEcole Centrale de Marseille, France

G.A. GravvanisDemocritus University of Thrace, Xanthi, Greece

P. HajelaRensselaer Polytechnic Institute, Troy, NY, USA

O. HassanSwansea University, United Kingdom

S. HernandezUniversidad de La Coruna, Spain

P. IvanyiUniversity of Pecs, Hungary

P.K. JimackUniversity of Leeds, United Kingdom

J. KruisCeske Vysoke U�ceni Technicke v Praze, Praha,Czech Republic

B. KumarUniversity of Strathclyde, Glasgow, United Kingdom

K.H. LawStanford University, CA, USA

M. LepsCzech Technical University, Prague, Czech Republic

R.I. MackieUniversity of Dundee, United Kindgom

F. MagoulesEcole Centrale Paris, France

R. Montenegro ArmasUniversidad de Las Palmas de Gran Canaria, Spain

R. OhayonConservatoire National des Arts et Metiers, Paris,France

M. PapadrakakisNational Technical University, Athens, Greece

R. PuschGeodevelopment International AB, Ideon Science Park,Lund, Sweden

M.Y. RafiqUniversity of Plymouth, United Kingdom

E. RammUniversitat Stuttgart, Germany

J.R. RicePurdue University, West Lafayette, IN, USA

D. RooseKatholieke Universiteit Leuven, Belgium

D. RyplCzech Technical University, Prague, Czech Republic

K. SchweizerhofUniversitat Karlsruhe, Germany

J. SienzUniversity of Wales, Swansea, United Kingdom

H.D. SimonNational Energy Research Scientific Computing Center,Berkeley, CA, USA

J. TrevelyanUniversity of Durham, United Kingdom

W. VenturiniUniversidade de Sao Paulo, Sao Carlos, Brazil

ADVERTISING INFORMATIONIf you are interested in advertising or other commercial opportunities please e-mail [email protected] and your enquiry will be passed to the correct person who willrespond to you within 48 hours.

PUBLICATION INFORMATIONAdvances in Engineering Software (ISSN 0965-9978). For 2013, volumes 55–66 is scheduled for publication. Subscription prices are available upon request from the Publisher orfrom the Elsevier Customer Service Department nearest you or from this journal’s website (http://www.elsevier.com/locate/advengsoft). Further information is available on thisjournal and other Elsevier products through Elsevier’s website (http://www.elsevier.com). Subscriptions are accepted on a prepaid basis only and are entered on a calendar yearbasis. Issues are sent by standard mail (surface within Europe, air delivery outside Europe). Priority rates are available upon request. Claims for missing issues should be made withinsix months of the date of dispatch.

Orders, claims, and journal enquiries: please contact the Elsevier Customer Service Department nearest you:

St. Louis: Elsevier Customer Service Department, 3251 Riverport Lane, Maryland Heights, MO 63043, USA; phone: (877) 8397126 [toll free within the USA]; (+1) (314) 4478878 [outsidethe USA]; fax: (+1) (314) 4478077; e-mail: [email protected]: Elsevier Customer Service Department, The Boulevard, Langford Lane, Kidlington, Oxford OX5 1GB, UK; phone: (+44) (1865) 843434; fax: (+44) (1865) 843970; e-mail:[email protected]: Elsevier Customer Service Department, 4F Higashi-Azabu, 1-Chome Bldg, 1-9-15 Higashi-Azabu, Minato-ku, Tokyo 106-0044, Japan; phone: (+81) (3) 5561 5037; fax: (+81) (3)5561 5047; e-mail: [email protected]: Elsevier Customer Service Department, 3 Killiney Road, #08-01 Winsland House I, Singapore 239519; phone: (+65) 63490222; fax: (+65) 67331510; e-mail:[email protected]

Author enquiries: For enquiries relating to the submission of articles (including electronic submission) please visit this journal’s homepage at http://www.elsevier.com/locate/ades.For detailed instructions on the preparation of electronic artwork, please visit http://www.elsevier.com/artworkinstructions. Contact details for questions arising after acceptanceof an article, especially those relating to proofs, will be provided by the publisher. You can track accepted articles at http://www.elsevier.com/trackarticle. You can also checkour Author FAQs at http://www.elsevier.com/authorFAQ and/or contact Customer Support via http://support.elsevier.com.

ADVANCES IN ENGINEERING SOFTWARE

EditorsProfessor A.K. NoorOld Dominion UniversityCenter For Advanced EngineeringEnvironments,ODU Peninsula Higher Education Center600 Butler Farm Road Room 2228Hampton, VA 23666, USAFax: +1 757 766 5246E-mail: [email protected]

Professor B.H.V. ToppingUniversity of Pecs, Hungary andHeriot-Watt University,Edinburgh, UKTel.: +44 1786 870 191Fax: +44 1786 870167E-mail: [email protected]