Hyperion Userguide (1)

Embed Size (px)

DESCRIPTION

Hyperion Userguide (1)

Citation preview

  • IntroductiontoHyperionPlanning

    OperatingBudget(OpBud)

    DREXELUNIVERSITYCONFIDENTIALDOCUMENTLASTUPDATED:

    March3,2014

  • DrexelUniversityConfidential Page1

    TABLE OF CONTENTS

    Brief Overview of Hyperion Planning and Reports . . . . . . . . . . . . . . . . . 2 Set up Requirements and Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Logging In to Hyperion Planning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 End User Task List and Basic Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Setting Up User Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Form Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 List of Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Brief Descriptions of Operating Budget Values . . . . . . . . . . . . . . . . . . . . 18 Working with Forms in Hyperion Planning Entering and Saving Data within Forms . . . . . . . . . . . . . . . . . . 20

    Adding New Account to a Form . . . . . . . . . . . . . . . . . . . . . . . . . 22

    How to Add Details to Cells

    Inserting Comment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

    Adding Supporting Detail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

    Adding Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

    Granting Permissions to View Added Document . . . . . . . . . 42

    Viewing Attached Documents. . . . . . . . . . . . . . . . . . . . . . . . . 47

    Exporting Form to Excel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

    Hyperion Planning Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

    Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 55

  • DrexelUniversityConfidential Page2

    BRIEF OVERVIEW OF HYPERION PLANNING AND REPORTS

    Hyperion Planning is the new web-based budget entry tool for Drexel University, including the College of Medicine (DUCOM) and the Academy of Natural Sciences (ANS). Currently there are two applications set up in Hyperion Planning:

    1) Operating Budget (Opbud)

    2) Salary Budget (Salbud). The OpBud application has been designed to replace Web*Budget in letting you create your budgets at the FUND-ORGN-ACCT level. OpBud provides end users with several improvements over the old system including the ability to differentiate budget reallocations from new budget requests (both one-time and ongoing). The SalBud application will be used by end users to manage position budgets (labor distributions) as well as facilitate the Merit process. Please note that the instructions outlined in this manual are focused on OpBud only. Access to Hyperion Planning All end users must have a valid Drexel User ID and password to log into the system.

    We have updated the end user list from Web*Budget with the help of the department heads. This list of end users, with their associated security access, has been uploaded directly into Planning.

    Only brand new users or existing users looking to update their access will need to complete the Hyperion Planning Access Request Form and forward it to the Office of Financial Planning and Analysis for processing.

    You can find the request form at http://drexel.edu/planningandanalysis/forms/overview/.

  • DrexelUniversityConfidential Page3

    SET UP REQUIREMENTS AND INSTRUCTIONS

    Hyperion Planning requires end users to run the application using Internet Explorer 8 only.

    In order to use Planning you will need to add the Planning URL to the list of trusted sites and then adjust some security settings.

    Adding the URL as a Trusted Site

    Click on Tools from the main menu and then select Internet Options at the bottom.

    After the Internet Options window opens, click on the Security tab and then click on the Sites button.

    Type in the URL into the Add this website to the zone: box and click the Add button.

    After you see the URL in the list of websites, click on the Close button which should return you to the Security tab of the Internet Options window.

    Adjusting Security Settings

    Select the Custom level button which will open the Security Settings Trusted Sites Zone window.

    Scroll down and enable Allow script-initiated windows without size of position constraints setting.

    Select the OK button.

    Select the OK button on the Security tab.

    Restart your internet browser.

  • DrexelUniversityConfidential Page4

    LOGGING IN TO HYPERION PLANNING

    You can access Planning via the following link URL: https://epm.irttest.drexel.edu/workspace/index.jsp

    Please save this link as a favorite for your future use.

    After you have typed in the URL and pressed enter, you will be directed to the log on screen.

    Enter in your Drexel User ID and domain password. (This is NOT your Web *Finance password.)

    Then select the Log On button.

    Once you log in, you will directed to the Hyperion Planning Home Page.

  • DrexelUniversityConfidential Page5

    There are three different ways to open Opbud (Operating Budget) form from the Home Page:

    1. Select Navigate >Applications>Planning>Opbud. 2. Select Opbud under Planning in Quick Links found on the right hand side of workspace. 3. Select Opbud under Recently Opened (This would appear after you had previously opened the

    form).

  • DrexelUniversityConfidential Page6

    There are two major sections of the OpBud - Select Data Form: 1. View Pane This section lists the Form Folders, the form names within a folder and also the

    business rules associated with a specific form. 2. Content Area - This section displays the data in crosstab form (very similar to pivot tables in

    Excel). Please double click the Forms folder or click the + sign to drill down to the next level.

  • DrexelUniversityConfidential Page7

    Select the Planning Forms folder. You will see that the Operating Budget Form has appeared in both the View Pane and in the Content Area. You can select either one to launch the form.

  • DrexelUniversityConfidential Page8

    END USER TASK LIST AND BASIC MODE

    The task list is essentially a centralized roadmap of what needs to be done in order to complete the budget submission timely and accurately. To view the task list you need to switch your mode from Advanced Mode to Basic Mode. This is done by clicking on View > Basic Mode from the main menu.

    You will notice that this creates a new tab in the application similar to a new page in an Excel workbook called OpBud Status FY15 Initial Reallocations Task List.

    As with Excel, you will be able to toggle back and forth between tabs during your session.

  • DrexelUniversityConfidential Page9

    This form quickly shows you the status of your task list (% complete how many tasks are incomplete/overdue/due soon) in the Content Pane.

    In the View Pane you will see FY15 Initial Reallocations Task List which can be expanded to show you all the active links to the task list items.

    After expanding FY15 Initial Reallocations Task List in the View Pane, we now see the active links to all of the task list items.

  • DrexelUniversityConfidential Page10

    You will have to click on each task in order to perform the required action(s) to complete that given task.

    In the Content Pane (the area to the right of the vertical bar) you will see two buttons View Task List and Next Incomplete. The View Task List button will display additional information regarding the task, including the status of each task list item. The Next Incomplete button will take you to the link/form/document for the first incomplete item on the Task List. After you select the View Task List button you will directed to the following form.

    This form supplies you with a check box to click on when the task is completed. Additional instructions associated with any given task can be accessed by clicking on the blue View.

    Again, by clicking on the active link located to the left of the vertical bar, you will be taken to the appropriate link/form/document to complete the assigned task.

  • DrexelUniversityConfidential Page11

    After you have switched to Basic mode, this screen will appear each time you open the operating budget entry form.

    You will be able to navigate/update the task list by using the buttons that now appear below the Content Area.

    Notice there is a check box for you to signify that you have completed the task that is highlighted on the View Pane.

  • DrexelUniversityConfidential Page12

    SETTING UP USER PREFERENCES

    To set up your user preferences, go to File and select Preferences.

    This will bring up the Preferences window. Click on the Planning icon in the lower left portion of the window and select the Display Options tab.

    This is the only tab that you will need to adjust.

    Within tab, you can set up Number Formatting for your planning forms.

    Once you have set up your desired formatting, select the OK button at the lower right of the window.

  • DrexelUniversityConfidential Page13

  • DrexelUniversityConfidential Page14

    FORM LAYOUT

    Now that you have your preferences set for the display, we can turn our attention to the physical layout of the forms.

    The forms provide a way for end users to view and input budget information for specific Entity/Fund/Orgn combinations.

    End users will only have the ability to view or enter data for the Entity/Fund/Orgn combinations to which you have been granted access.

    By now, you should be familiar with the View Pane that houses the task lists active links. Across the top of the Content Area you will find the Page Items. The list of choices available from each of the boxes after selecting the button are driven by your end users security. Next is the Crosstab Area of the form (similar to a pivot table in Excel). Finally at the bottom, as we discussed earlier, is the Task List Navigation section. It is very important to note that every form that is displayed is an intersection of the following Dimensions:

    Entity Version Fund Organization Years Period

  • DrexelUniversityConfidential Page15

    Scenario Account Program(hidden)

    The form above shows the different dimensions within the content area of the Planning form.

    Note: Program is also a dimension but it is hidden on the form between the account column and the first historical actuals column (this explains why sometimes there are multiple rows with the same account).

  • DrexelUniversityConfidential Page16

    LIST OF DIMENSIONS The following lists show the members of each dimension along with the hierarchy (Fund, Organization, Account and Program have the same members that are in Banner)

    ENTITY

    Total Drexel Drexel University (DU) DU College of Medicine (DUCOM) Academy of Natural Sciences (ANS) VERSION

    Org Level CollegeLevel SVPLevel BoardApprovedLevel Final FUND

    These are the same Fund Codes that are currently used in Banner. ORGANIZATION These are the same Organization Codes that are currently used in Banner.

    YEARS

    FY 12 thru FY13 - Historical Years FY14 Current Fiscal Year FY15 Budget Year

    PERIOD

    YearInput - Used for Budget Year Year Total Used for Historical and Current Years (FY12, FY13and FY14) SCENARIO Actual Forecast Total Budget

    - Current Services - Reallocation-Initial - New Request

    One-Time Ongoing

    - Reallocation-Final

  • DrexelUniversityConfidential Page17

    Note the hierarchy: - One-Time and Ongoing are children of New Request. - New Request along with Current Services, Reallocation-Initial and Final are children of

    Total Budget.

    ACCOUNT

    These are the same Account codes that are currently used in Banner.

    It is important to note that OpBud has been built as a bottom up budgeting model. This means that data can only be entered at the lowest level of a specific dimension.

    Helpful TrickYou will notice that there is a small black triangle inside a small white rectangle between the View Pane and the Content Area. There is also one above and to the right of the search window in the upper right hand corner of the form.

    When you click on them, they will hide/collapse either the View Pane or the Tool bar to give you more space to view data on the form.

  • DrexelUniversityConfidential Page18

    BRIEF DESCRIPTION OF OPERATING BUDGET VALUES

    Column Description FY12 YearTotal Actual Fiscal Year 2012 total actual revenues and expenses

    FY13 YearTotal Actual Fiscal Year 2013 total actual revenues and expenses

    FY14 YearTotal Actual Year to Date (YTD) actual as of the last load from Banner Finance

    FY14 YearTotal Forecast Current Fiscal Year Revised Budget which includes the Original Board

    Approved Budget (BD01) plus or minus permanent (BD02) and temporary adjustments (BD04)

    FY15 YearInput CurrentServices

    Budget Year Current Services which includes Current Fiscal Year (FY14) Board Approved Budget (BD01) plus or minus permanent adjustments (BD02)

    FY15 YearInput Reallocation Initial

    Reallocations of Current Services Budget made at the beginning of the budget process

    Please note that the Current Services numbers will be updated WEEKLY. As a result, if you have permanent reallocations in the current fiscal year, you will not need to re-enter those amounts in this column. In the past, Current Services was based on a cutoff date, so any permanent adjustments made after that date were not included in the Current Services budget numbers.

  • DrexelUniversityConfidential Page19

    Column Description FY15 YearInput One-Time Enter in arequest for temporary budget dollars for the fiscal year. These

    requests, if approved, will NOT be incorporated into the Board Approved Budget. They will be processed as a separate temporary adjustment.

    FY15 YearInput Ongoing Enter in a request for permanent budget dollars for the fiscal year. These requests, if approved, will be incorporated into the Board Approved Budget.

    FY15 YearInput New Requests

    The calculated total of FY15 Ongoing and One-Time Requests.

    FY15 YearInput Reallocation Final

    Any reallocations of FY15 Board Approved Budget.

    FY15 YearInput Total Budget

    Calculated differently for operating and salary budgets

    FY15 YearInput Reallocation Initial

    Reallocations of Current Services Budget made at the beginning of the budget process

    Operating Budget - represents Total of FY15 Current Services, plus (+) FY15 New Requests, plus (+) FY15 Reallocation Final.

    Salary Budget represents Total Requested budget (+) FY15 Merit, plus (+) FY15 Temporary Adjustments that will be fed from the SalBud application.

    Please note this will not be your Board Approved Budget. The Board Approved Budget will be the Total Budget less the One-Time Requests. As noted previously, One-Time requests will be processed as a temporary adjustment.

  • DrexelUniversityConfidential Page20

    WORKING WITH FORMS IN HYPERION PLANNING

    This section describes some of the operations you can perform when working with forms in Hyperion Planning. It will show you how to enter and save data, add new accounts to the form, and add detail to cells.

    Entering and Saving Data within Forms

    When the web form opens, it displays the different columns as previously mentioned. During the initial stage of the budget process, you are allowed to enter initial reallocations of the Current Services budget.

    Note that the Reallocations Initial column is unshaded, indicating that you are allowed to enter and save data.

    After you have entered data and select enter, the color of the cell changes to a pale yellow. This indicates that you have entered the data, but did not hit SAVE yet. Once you hit SAVE, the color of the cell disappears and a message will appear on the top section of the form. The data has been saved,

  • DrexelUniversityConfidential Page21

    Rule of Thumb:

    As a general rule, the grand total of the reallocations column should equal to zero within the cost center or within the division.

  • DrexelUniversityConfidential Page22

    Adding new account to a form

    There may be occasions when you need to budget in an account code that does not appear on the form. In this case, you have the ability to add an account code.

    In this example we are looking to add and budget for 3302 - Athletic Team Lodging which is not curently on this form.

    Right click anywhere in the accounts column and choose Budget a New Account.

  • DrexelUniversityConfidential Page23

    The Runtime Prompts window will appear.

    Since you are only adding a new account, you only have to manipulate the first line in the window. Very Important: ONLY CHANGE THE FIRST LINE OF THIS WINDOW!

  • DrexelUniversityConfidential Page24

    Click the Select Members icon . This opens the Member Selection window.

    Please make sure you are on the Members tab. You will NEVER need to go the Variables tab.

  • DrexelUniversityConfidential Page25

    Highlight the Account in the left hand box and click on the deselect button to deselect that account.

    The large left hand box will show you a tree list of choices for account codes to add.

  • DrexelUniversityConfidential Page26

    Expand the accounts list in the left hand box by clicking the sign, or if you know the account code, use search window to enter either the account number or part of the account name. Select the display properties button and choose Alias to display the descriptions for the accounts. After you have changed the display properties, select the Keep Only by Levels or Generations button

    and select Level.

    When the Filter By Level window opens, put a check in the box next to 0 and then click the OK button.

    This will ensure that you available choices are Level 0 accounts.

    Remember, that the system is designed so that you can only enter in budget data into form that use Level 0 dimension members.

    After you have selected the account code, click on the select button to move the account code to the right hand box.

  • DrexelUniversityConfidential Page27

    You will now see that the account has moved over to the right hand side. Now click on the OK button select the account.

    Your selected Account will not appear on the first line. Select the Launch Icon.

  • DrexelUniversityConfidential Page28

    Your new account row will now appear on the form. You will also see a message at the top of the form indicating Budget New Account was successful.

    HOW TO ADD DETAILS TO CELLS

    There are three (3) ways to add additional detail to a cell or range of cells:

    1. Insert Comment 2. Supporting Detail 3. Add Document

  • DrexelUniversityConfidential Page29

    1. Inserting Comments

    If you want to add notes or comments to a given cell, right click on the cell and a list of options will appear.

    Click on the Insert Comment option.

  • DrexelUniversityConfidential Page30

    The Comment window will appear. Enter the desired comment in the white box in the form (limit is 1500 characters). When you have finished entering your comment, select the Submit button. A small green triangle will now appear in the upper right had corner of the cell to indicate that there is a comment attached to that cell.

  • DrexelUniversityConfidential Page31

    To review the comments you have added to the cell, simply click on the desired cell. Right click and select View Comment.

  • DrexelUniversityConfidential Page32

  • DrexelUniversityConfidential Page33

    2. Adding Supporting Detail

    You can also add supporting detail to a cell that will provide explanatory calculations of how the amount was determined. This provides a quick way to drill down into the data and to understand the basis of that data. Right click on the cell, and select the Supporting Detail option.

  • DrexelUniversityConfidential Page34

    The Supporting Detail window will expand. When you add supporting detail you can break down the various factors that make up the total cost.

    Enter in a description for the first line. For example, we uses Number of Units. Select an operator (+ - * /). (Typically this is + for the first line.) Enter in the desired amount in the appropriate cell.

    The Supporting Detail window gives you the following two options to add lines to your detail:

    1. Add Child 2. Add Sibling

    Add Sibling:

    Make sure you are on the desired line and select the Add Sibling button:

  • DrexelUniversityConfidential Page35

    By clicking the Add Sibling button, you are adding another line to the supporting detail that is on the same level as the line above.

    After you have finished adding your information, select the Save button in the lower right section of the form.

    Enter the Description (in this example, we used Cost per Unit.) Fill out the operator (in this example, we used (*) multiply.) Enter the amount (in this eample, we used 10.) Notice the Total amount is shaded green which means it is a calculated value. Select the Save button.

    When you return to the Operating Budget screen, the calculated amount has populated the cell.

    Notice the color of the cell changed from white to teal indicating that the cell contains supporting detail.

  • DrexelUniversityConfidential Page36

    You will also see a window appear if you hover over the cell stating that the cell contains supporting detail.

    The message that The data has been saved, will appear on top of the form.

  • DrexelUniversityConfidential Page37

    Add Child:

    To add a child to the calculation, return to the supporting detail window by right clicking the teal cell and selecting Supporting Detail.

    Select the Add Child button.

  • DrexelUniversityConfidential Page38

    Notice that the cell amount changes from white to green. This denotes that the cell is no longer data enterable, but is now a calculated cell. Each time you click the Add Child button while on the first row, Planning will add another indented row. The Parent Level line (Number of Units in the example) is calculated by using the operators you selected for each Child (Group1,Group2, and Group3) that are aggregated to make up the Total. After you have finished adding your information, select the Save button on the lower right of the form.

    3. Adding Documents

    In order to add documents to cells, you must first have to save the desired documents in the appropriate place.

    Start by clicking Explore in the toolbar.

    Saving Documents to Root Folder

    This opens up a new tab in the application. You will see the Root Folder listed first in the View Pane.

    Expand (+) the Root folder and then expand (+) the FY15 Budget Docs folder.

  • DrexelUniversityConfidential Page39

    The folders that are listed here are based on the end users security access. Select the appropriate folder that corresponds with the appropriate organization code. Currently there are separate folders for Operating Budget documents (folders end with OB), folders for Salary Budget documents (ending with SB) and folders specifically for Web*Merit documentation (ending with WM). After you have selected your desired folder select to File > Import > File

  • DrexelUniversityConfidential Page40

    The import window will now appear: Select the Browse button and find your saved document/pdf/spreadsheet. Select the file and click the OK button.

    The path to your desired file will now appear in the first line. The file name will appear in the second line of the form.

  • DrexelUniversityConfidential Page41

    You may save your documents using any naming methodology, but we recommend using the following naming convention: ENTITY_FUND_ORGN_ACCT_ Name of document. e.g. D_110001_3302_2011_Posn Req-Bean counter extraordinaire

    A meaningful description can be entered in the bottom section of the form.

    Select Next

    You will then be directed to Advanced options.

    No action is necessary on this screen.

    Select Next

  • DrexelUniversityConfidential Page42

    Granting Permissions to View Added Document

    The Permissions screen will appear next.

    Select the Groups tab and change the selection criteria from begin with to contain

    Type in the box next to contain the number located at the top of the window (ie 2037_OB)

    Select on the Update List button. The group will now appear under Name.

    Highlight the group and select the button to move the group over to the Selected Users, Groups and Roles: section.

    Under access select the dropdown menu (darkened triangle) and choose Full Control from the choices.

    Select Finish at the bottom of the form

    The desired document will now appear in your folder and is ready to be attached to a cell.

  • DrexelUniversityConfidential Page43

    Adding Documents To add documents to a cell, right click the desired cell and choose Add/Edit Document.

  • DrexelUniversityConfidential Page44

    The window will display the details of the selected cell. It shows the Entity, Version, Fund, Orgn, etc.

    Select the Browse icon to locate the document that you are adding to the cell.

  • DrexelUniversityConfidential Page45

    Drill down from the FY15 Budget Docs file and select the desired file.

    Select the file and click the OK button at the bottom right of the window.

  • DrexelUniversityConfidential Page46

    The hyperlink to the document will now appear in the window. Select the Submit button.

    A blue triangle appears marking a cell with document attached.

  • DrexelUniversityConfidential Page47

    Viewing Attached Documents

    If you want to see the document attached to a cell. Right click on a cell, and select Open Document.

    The File Download window will appear. Select the Open button

  • DrexelUniversityConfidential Page48

    The Windows Security window will appear. Select the Cancel button.

    Your document will now be displayed in its appropriate program (Word, Excel, Acrobat).

    Tip: Please note that sometimes the program will open up behind your Internet Explorer session. You simply have to click on the program icon on the Windows toolbar to reveal your document.

  • DrexelUniversityConfidential Page49

    EXPORTING FORM TO EXCEL

    Unfortunately, Planning does not have an undo button like Excel. Once you hit save you will not be able to revert back to the prior value.

    There are times when you may want to take a snapshot of a form prior to making changes. This would provide you a record of the original values.

    Go to Tools > Export as Spreadsheet.

  • DrexelUniversityConfidential Page50

    The File Download window will appear.

    Select the Save button.

    You will be direct to the Save As window.

    Rename the file and select the Save button.

  • DrexelUniversityConfidential Page51

    You can now open the file in Excel. It will look similar to the spreadsheet above.

  • DrexelUniversityConfidential Page52

    HYPERION PLANNING FUNCTIONALITY

    Cell Color Codes

    Cell background colors indicate:

    Data entry is prohibited

    Data has been changed but not saved

    Cell has supporting detail attached

    Cell is locked

    Data entry available

    Toolbar Commands

    HOME This is Hyperion Plannings home page.

    NEW DOCUMENT This command allows you to open a new document.

    OPEN DOCUMENT This command allows you to open an existing document.

    EXPLORE This command allows you to open folders under the Root Folder. The Root folder contains the subfolders use to store supporting documents.

    Grey

    Yellow

    Teal

    Brown

    Off White

  • DrexelUniversityConfidential Page53

    REFRESH This command reverts any unsaved data back to the values stored since the last save took place. It will NOT save changes and provides a warning to that effect. NOTE: There is no Undo command. Save regularly and use Refresh to Undo to the last save. [Same as ViewRefresh]

    PRINT This command allows print settings and a print preview. [Same as FilePrint]

    ADJUST A given cell value can be decreased or increased by either a value or a percentage (choose from a drop-down menu). Fill out the pop-up window as desired and click Adjust Data. [Same as EditAdjust] You can also do this directly in a cell.

    COMMENT This command allows you to add notes to a given cell. A blue triangle appears marking a cell with text attached.

    To see text, highlight the marked cell and re-click Cell Text. [Same as EditCell Text]

    LOCK/UNLOCK CELLS This command will lock and unlock a given cell, with locked cells showing as brown. To unlock, position the cursor back on the brown cell and click the command again. Use Shift-click to select multiple cells to lock or unlock. [Same as EditLock/Unlock Cells]

    SUPPORTING DETAIL This command allows you to add supporting details, in the form of calculations, to aggregated lines, such as travel. This provides a way for you to drill down into data and to understand the basis of that data. To see the detail, double-click on the cell or click Supporting Detail again while on the cell. Double-clicking on unlocked available cells also opens up the Supporting Detail box. [Same as EditSupporting Detail]

    ADD/EDIT DOCUMENT This command allows you to add/edit document to a given cell. The cell color is teal indicating that a document is attached to a cell. [Same as EditAdd/Edit Document]

  • DrexelUniversityConfidential Page54

    OPEN DOCUMENT This command allows you to open a document attached to a cell.

    CUT This command allows you to cut cell contents. Shift-click to select multiple cells to cut. [Same as EditCut]

    COPY This command allows you to copy cell contents. Shift-click to select multiple cells to copy. [Same as EditCopy]

    PASTE This command allows you to paste previously cut or copied data. Multiple cells will be pasted in the same order as they were cut or copied. [Same as Edit Paste]

    INSTRUCTIONS Not Applicable

    OPEN IN SMART VIEW Not Applicable

    NEW AD HOC GRID Not Applicable

    ANALYZE Not Applicable

    AD HOC OPTIONS Not Applicable

    TASK LISTTask lists may be used to track to do items during the planning process. This command displays current task list(s) in a separate window for reference. [Same as ViewTask Lists]

  • DrexelUniversityConfidential Page55

    CONTACT INFORMATION Please direct any questions to a member of the Office of Financial Planning & Analysis team: Nicole Ferretti Assoc. VP, Financial Planning &

    Analysis [email protected] 215-571-4331

    Michinao (Mitch) Baker Director of Financial Planning & Analysis

    [email protected] 215-895-1917

    Maribeth Schneller Director of Financial Analytics [email protected] 215-895-6058

    Susan Medina Senior Financial Analyst [email protected] 215-895-2843

    Office of Financial Planning and Analysis 3141 Chestnut Street, Suite 228 Philadelphia, PA, 19104 [email protected]