32
Hydraulic lift crane LR 1110 EN LR 1001.02

Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

  • Upload
    vokhanh

  • View
    237

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

Hydraulic lift crane

LR 1110 EN

LR 1001.02

Page 2: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

2 LR 1110 – 1001.02

Concept and characteristics

• Excellent lifting capacities thanks to optimized distribution of forces

• New cabin with improved and ergonomic operating concept

• Convenient ladder to access the cabin

• Optimized air-conditioning and airflow in the cabin

• Catwalks and optional railings on uppercarriage and cabin

• Transport possible with mounted boom foot and crawlers

• Foldable catwalks remain with the machine during transportation

• Optional railings can be disassembled in a few steps using pin connections

LR 1110 Standard

Page 3: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 3

• Up to 20% increase in lifting capacities where tilting is the limiting factor

• Larger radii thanks to improved stability

• Function of swinging counterweight: the rear counterweight splits in the centre and is swung backwards to a max. angle of 90°. The counterweight can adopt any position within this angle range. The optimized lifting capacities are calculated online in real time via the LMI system and displayed in the operator’s cab.

• Easy and quick adaptation of the counterweight to the lifting requirements

• Swinging counterweight requires less counterweight – swinging back leads to improved ground pressure and similar lifting capacities to those with full counterweight in standard position can be achieved.

• Swinging the counterweight back makes the machine narrower – this allows the machine to pass through narrow spaces.

• For increased lifting capacities the swinging counterweight can also be added to other LR 1110 with standard counterweight

Option: LR 1110 with swinging counterweight

Page 4: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

4 LR 1110 – 1001.02

Dimensions Basic machine with undercarriage

Operating weight

The operating weight includes the basic machine with crawlers, 2 main winches 120 kN and 14 m main boom, consisting of A-frame, boom foot (7 m), boom head (7 m), 34 t basic counterweight, 17.5 t carbody counter- weight and 100 t hook block.

Total weight approx. 115.6 t

Remarks

1. The lifting capacities stated are valid for lifting operation only (corre-sponding with crane classification according to F.E.M. 1.001. crane group A1).

2. Crane standing on firm, horizontal ground.

3. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted form the gross lifting capacity to obtain a net lifting value.

4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity.

5. For max. wind speed please refer to lift chart in operator‘s cab or manual.

6. Working radii are measured from center of swing and under load.

7. The lifting capacities are valid for 360 degrees of swing.

8. Calculation of stability under load is based on DIN 15019 / part 2 / chart 1 and ISO 4305 Table 1 + 2, tipping angle 4°.

9. The structures are calculated according to F.E.M. 1.001 - 1998 (EN 13001-1; EN 13001-2).

Ground pressure

The actual ground pressure is calculated according to the configuration and position of the machine and displayed in the operator’s cab.Using the optional Liebherr Crane-Planner the actual ground pressure, amongst other parameters, can already be calculated and displayed in the planning stage.

Equipment

Main boom (No. 1512.xx) max. length 71 m Luffing jib (No. 1309.xx) max. length 66.8 m Max. combination main boom 38 m and luffing jib 66.8 m Fixed jib (No. 0806.xx) 32 m Auxiliary jib 30 t

Option: swinging counterweight 0 – 90°

980

64754300

1582

3686

7871922

7916

14552

6430

R 4800

9005050

347

1270

5280 4161

90°

R 6590

6430

4194

R 4697

Page 5: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 5

Transport dimensions and weights Basic machine and boom (No. 1512.xx)

Transport options Basic machine and crawlers

14521

3125

3500

914Option 13543036

6475 914

1267

Basic machine

with A-frame, 2x 120 kN crane winches, boom foot and crawlers, without basic counterweight

Width 3500 mm

Weight without hoist rope 57000 kg

Weight of hoist rope 3.42 kg/m

Basic machine

with A-frame, 2x 120 kN crane winches, boom foot, without basic counterweight and crawlers

Width 3500 mm

Weight without hoist rope 37500 kg

Weight of hoist rope 3.42 kg/m

Crawler 2x

Track pads 900 mm

Width 914 mm

Weight 10200 kg

Boom section (No. 1512.22) 3 m

Width 1610 mm

Weight incl. main boom pendants 471 kg

Weight incl. main boom and luffing jib pendants 537 kg

Boom section (No. 1512.22) 6 m

Width 1610 mm

Weight incl. main boom pendants 760 kg

Weight incl. main boom and luffing jib pendants 870 kg

Boom section (No. 1512.22) 12 m

Width 1610 mm

Weight incl. main boom pendants 1392 kg

Weight incl. main boom and luffing jib pendants 1612 kg

Boom head (No. 1512.22)

Width 1819 mm

Weight incl. main boom pendants 2190 kg

1700

3472

14552

3500

6134

1476

1476

3134

1476

12134

7983

2690

Page 6: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

6 LR 1110 – 1001.02

Transport dimensions and weights Luffing jib (No. 1309.xx)

Fixed jib (No. 0806.xx)

Luffing jib head (No. 1309.22)

Width 1392 mm

Weight* 1115 kg

Luffing jib section (No. 1309.20) 3 m

Width 1392 mm

Weight* 302 kg

Luffing jib section (No. 1309.20) 6 m

Width 1392 mm

Weight* 510 kg

Luffing jib section (No. 1309.20) 11.7 m

Width 1390 mm

Weight* 942 kg

Luffing jib foot with A-frames (No. 1309.22)

Width 1624 mm

Weight* 4183 kg

*) Including pendants

Fixed jib head (No. 0806.16)

Width 920 mm

Weight* 424 kg

Fixed jib section (No. 0806.15) 6 m

Width 928 mm

Weight* 250 kg

Fixed jib section (No. 0806.15) 3 m

Width 930 mm

Weight* 145 kg

Fixed jib foot with A-frame (No. 0806.20)

Width 1800 mm

Weight* 1237 kg

6289

3142

6142

11844

8925

2125

1182

1182

1182

2945

*) Including pendants

1193

6927

819

6126

3126

819

1154

6020

Page 7: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 7

Transport dimensions and weights Counterweight

100 t hook block – 5 sheaves

Width 740 mm

Weight 2300 kg

80 t hook block – 3 sheaves

Width 560 mm

Weight 2000 kg

40 t hook block – 1 sheave

Width 480 mm

Weight 1500 kg

12.5 t single hook

Width 400 mm

Weight 600 kg

Counterweight 12x

Width 945 mm

Weight 1500 kg

Standard counterweight 1x

Width 1475 mm

Weight 16000 kg

Swinging counterweight option 1x

Width 1475 mm

Weight 16000 kg

Carbody counterweight 2x

Standard

Width 1640 mm

Weight 7500 kg

1960

840

5270

1591

5270

1021

932

467

1620 138

Carbody counterweight 2x

Standard

Width 1530 mm

Weight 1250 kg

Hooks

1889

770

1815

770

770

1623

1116

400

2195

820 160 t hook block – 7 sheaves

Width 823 mm

Weight 4000 kg

Page 8: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

8 LR 1110 – 1001.02

Boom combinations

Main boom No. 1512.xx 71 m

Max. combination 104.8 m

Main boom No. 1512.xx 38.0 m Luffing jib No. 1309.xx 66.8 m

Max. combination 98.8 m

Main boom No. 1512.xx 41.0 m Luffing jib No. 1309.xx 57.8 m

Max. combination 85 m

Main boom No. 1512.xx 53 m Fixed jib No. 0806.xx 32 m

7 m (23 ft) No. 1512.24

3 m (10 ft) No. 1512.22

12 m (40 ft) No. 1512.22

12 m (40 ft) No. 1512.22

7 m (23 ft) No. 1512.22

6 m (20 ft) No. 1512.22

12 m (40 ft) No. 1512.22

12 m (40 ft) No. 1512.22

12 m (40 ft) No. 1512.22

12 m (40 ft) No. 1512.22

7 m (23 ft) No. 1512.22

5.5 m (18 ft) No. 1309.22

3 m (10 ft) No. 1309.20

6 m (20 ft) No. 1309.20

11.7 m (38 ft) No. 1309.20

11.7 m (38 ft) No. 1309.20

11.7 m (38 ft) No. 1309.20

11.7 m (38 ft) No. 1309.20

5.5 m (18 ft) No. 1309.22

7 m (23 ft) No. 1512.24

7 m (23 ft) No. 1512.24

12 m (40 ft) No. 1512.22

12 m (40 ft) No. 1512.22

7 m (23 ft) No. 1512.22

12 m (40 ft) No. 1512.22

3 m (10 ft) No. 1512.22

6 m (20 ft) No. 0806.15

3 m (10 ft) No. 0806.15

5.5 m (18 ft) No. 0806.16

5.5 m (18 ft) No. 0806.16

6 m (20 ft) No. 0806.15

6 m (20 ft) No. 0806.15

Page 9: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 9

Technical description

Engine

Power rating according to ISO 9249, 230 kW (308 hp) at 1700 rpm Engine type Liebherr D 944 A7 SCR Fuel tank 850 l capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA/CARB Tier 4f and 97/68 EC Stage IV.

Hydraulic system

A double axial displacement pump supplies the open loop hydraulic system, allowing all functions to be operated simultaneously. To minimize peak pressure an automatic working pressure cut–off is integrated in the pump. All filters are electronically monitored. The use of synthetic environ-mentally friendly (biodegradable) oils is possible. Working pressure max. 350 bar Oil tank capacity 685 l

Luffing jib winch

Line pull (5th layer) 82 kN Rope diameter 20 mm Jib luffing 46 sec. from 15° to 78°

Boom winch

Line pull (6th layer) 86 kN Rope diameter 20 mm Boom luffing 44 sec. from 15° to 86°

Crawlers

Propulsion through axial piston motor, hydraulically released spring loaded multi–disc brake, crawler tracks, hydraulic chain tensioning device. Track pads 900 mm Drive speed max. 2.8 km/h

Swing

Consists of rollerbearing with external teeth, swing drive with fixed axial piston hydraulic motor, spring loaded and hydraulically released multi–disc holding brake, planetary gearbox and pinion. Both swing modes are possible – speed control or free swing. A multi–disc holding brake acts automatically at zero swing motion. Swing speed from 0 – 2.1 rpm continuously variable.

Main winches

Line pull (4th layer) 120 kNRope diameter 26 mmDiameter (1st layer) 580 mmRope speed 0 – 136 m/minRope capacity in 4 layers 256 mThe winches are outstanding in their compact design and easy assembly. Propulsion is via a planetary gearbox in an oil bath. Load support by the hydraulic system; additional safety factor provided by a spring loaded, multi–disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option – winch with free-fall system: Clutch and braking functions on the free-fall system are provided by a compact designed, low wear and maintenance-free multi–disc brake.

Noise emission

Noise emissions correspond with 2000/14/EC directive. Guaranteed sound pressure level LPA in the cabin ≤ 71 dB(A)Guaranteed sound power level LWA ≤ 106 dB(A) Vibration transmitted to the hand-arm system of the machine operator < 2.5 m/s2

Vibration transmitted to the whole body of the machine operator < 0.5 m/s2

Control

The heart of the hydraulic crawler cranes is the Liebherr control system which has been developed and manufactured in-house. It includes all control and monitoring functions and is designed to withstand extreme environmental conditions and heavy duty construction tasks. Complete machine operating data as well as warning signals and irregularities are clearly displayed on the high resolution monitor in the operator‘s cab in the required language.The electro-hydraulic proportional control allows several movements to be performed simultaneously. This ensures that all categories of loads can be positioned with utmost precision.

Page 10: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

10 LR 1110 – 1001.02

Main boom 86° – 15° (No. 1512.xx) 34 t counterweight and 17.5 t carbody counterweight

816243240485664 0 m0

8

16

24

32

40

48

56

64

72

80

88m

0 ft4080120160200

0

40

80

120

160

200

240

280

ft

23 m

20 m

17 m

14 m

71 m

68 m

65 m

62 m

59 m

56 m

53 m

50 m

47 m

44 m

41 m

38 m

35 m

32 m

29 m

26 m

86°80°

70°

60°

50°

40°

30°

20°

Main boom configuration (No. 1512.xx)

Configuration for boom lengths between 14 m and 71 m

Length Amount of boom extensions

Boom foot 7 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Boom insert 3 m 1 1 1 1 1 1 1 1 1 1

Boom insert 6 m 1 1 1 1 1 1 1 1 1 1

Boom insert 12 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4

Boom head 7 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Boom length (m) 14 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71

Auxiliary jib applicable

The maximum capacity of the auxiliary jib is 30 t. The corresponding load chart is programmed in the LMI system.

Auxiliary jib 30 t

2000

Page 11: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 11

Lift chart for main boom (No. 1512.xx) 34 t counterweight and 17.5 t carbody counterweight

Capacities in metric tonnes for boom lengths (14 m - 71 m) – with 120 kN winches

Boom length in (m)

Radius 14 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 Radius(m) t t t t t t t t t t t t t t t t t t t t (m)

3 115.5 34 113.1 111.9 96.2 91.7 86.3 82.1 45 93.1 88.1 83.6 79.5 75.9 72.4 67.4 60.8 53.5 48.3 41.9 56 74.0 70.6 67.6 64.8 62.3 59.9 57.6 55.5 50.5 46.1 40.8 40.6 34.3 30.7 27.2 67 61.2 58.8 56.6 54.6 52.7 50.9 49.2 47.5 46.0 43.8 39.0 39.3 33.2 30.0 26.8 24.4 21.8 19.3 17.6 16.2 78 50.6 50.3 48.6 47.0 45.6 44.1 42.8 41.5 40.3 39.1 36.8 36.9 32.3 29.2 25.9 23.6 21.2 18.9 17.4 16.1 89 42.8 42.8 42.5 41.2 40.1 38.9 37.8 36.7 35.7 34.7 33.8 32.8 31.3 28.3 25.2 23.0 20.7 18.4 16.9 15.6 9

10 37.0 37.0 36.9 36.6 35.7 34.7 33.8 32.8 32.0 31.1 30.3 29.5 28.8 27.5 24.4 22.2 20.2 18.0 16.6 15.1 1012 28.9 28.9 28.9 28.8 28.7 28.4 27.7 27.0 26.3 25.7 25.1 24.4 23.9 23.3 22.7 21.0 19.3 17.1 15.7 14.3 1214 23.5 23.5 23.5 23.4 23.4 23.3 23.2 22.7 22.2 21.7 21.2 20.7 20.2 19.7 19.0 18.4 17.6 16.5 15.0 13.6 1416 19.6 19.6 19.6 19.5 19.4 19.3 19.2 19.1 18.6 18.2 17.7 17.1 16.6 16.0 15.5 14.8 14.2 13.6 13.0 1620 14.5 14.5 14.4 14.3 14.2 14.1 14.0 13.9 13.7 13.3 12.8 12.3 11.9 11.5 10.9 10.4 9.9 9.4 2022 12.7 12.7 12.5 12.5 12.3 12.3 12.1 12.0 11.7 11.3 10.9 10.5 10.0 9.5 9.1 8.6 8.1 2226 10.0 9.9 9.8 9.7 9.6 9.5 9.4 9.2 8.9 8.5 8.2 7.8 7.4 7.0 6.5 6.1 2628 8.9 8.8 8.7 8.6 8.5 8.3 8.2 8.0 7.6 7.3 6.9 6.5 6.1 5.8 5.3 2832 7.1 7.0 6.9 6.8 6.7 6.5 6.5 6.2 5.9 5.5 5.2 4.8 4.5 4.1 3234 6.3 6.3 6.1 6.0 5.9 5.8 5.6 5.3 5.0 4.6 4.3 3.9 3.6 3438 5.1 5.0 4.9 4.7 4.6 4.5 4.4 4.0 3.7 3.4 3.1 2.7 3840 4.5 4.4 4.3 4.2 4.0 3.9 3.6 3.3 3.0 2.7 2.4 4044 3.6 3.4 3.3 3.2 3.1 2.9 2.7 2.4 2.1 4446 3.1 3.0 2.9 2.7 2.6 2.4 2.1 4648 2.7 2.5 2.4 2.3 2.2 4850 2.2 2.1 50

Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

34 t swinging counterweight 90° and 17.5 t carbody counterweight

Capacities in metric tonnes for boom lengths (17 m - 71 m) - with 120 kN winches

Boom length in (m)

Radius 17 20 23 26 29 32 35 38 41 44 47 50 53 56 59 62 65 68 71 Radius(m) t t t t t t t t t t t t t t t t t t t (m)

6.9 16.2 6.97 16.2 78 23.6 21.2 18.9 17.4 16.1 89 28.3 25.2 23.0 20.7 18.4 16.9 15.6 9

10 33.4 33.5 30.5 27.5 24.4 22.2 20.2 18.0 16.6 15.1 1012 30.6 29.9 29.2 28.5 27.8 27.2 26.3 23.2 21.0 19.3 17.1 15.7 14.3 1214 26.4 26.4 26.3 26.2 25.8 25.3 24.7 24.2 23.6 23.1 22.5 21.3 19.7 18.4 16.5 15.0 13.6 1416 22.2 22.2 22.1 22.1 22.0 21.9 21.8 21.7 21.3 20.8 20.4 19.8 19.2 18.7 18.1 17.2 15.5 14.2 13.0 1618 19.0 18.9 18.9 18.8 18.7 18.6 18.5 18.4 18.1 17.6 17.0 16.5 16.0 15.5 14.9 14.3 13.3 12.3 1820 16.5 16.4 16.4 16.3 16.2 16.1 16.0 15.9 15.8 15.4 14.9 14.4 14.0 13.5 12.9 12.4 12.0 11.4 2022 14.4 14.5 14.3 14.3 14.1 14.0 13.9 13.8 13.6 13.1 12.7 12.3 11.8 11.4 10.9 10.5 10.0 2226 11.5 11.4 11.3 11.2 11.1 11.0 10.9 10.7 10.5 10.1 9.8 9.4 8.9 8.5 8.1 7.7 2628 10.2 10.2 10.0 10.0 9.8 9.7 9.6 9.5 9.1 8.8 8.4 8.0 7.6 7.2 6.8 2832 8.3 8.2 8.1 8.0 7.9 7.7 7.6 7.5 7.2 6.8 6.5 6.1 5.8 5.4 3234 7.4 7.4 7.2 7.1 7.0 6.9 6.8 6.5 6.2 5.8 5.5 5.2 4.8 3438 6.1 6.0 5.9 5.7 5.6 5.5 5.4 5.1 4.8 4.5 4.2 3.8 3840 5.4 5.3 5.2 5.1 5.0 4.8 4.7 4.4 4.1 3.7 3.4 4044 4.4 4.3 4.2 4.1 3.9 3.8 3.6 3.3 3.0 2.7 4446 3.9 3.8 3.7 3.5 3.4 3.3 3.0 2.7 2.4 4648 3.4 3.3 3.2 3.0 2.9 2.7 2.4 2.1 4850 3.0 2.8 2.7 2.6 2.5 2.2 5055 2.1 55

TLT 11943069 - M00000 V7

TLT 11943069 - M00000 V7

Page 12: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

12 LR 1110 – 1001.02

Working range – luffing jib 78° – 15° (No. 1309.xx) Main boom 88° – 45°

0

8

16

24

32

40

48

56

64

72

80

88

96

104

112m

816243240485664 0 m

0 ft4080120160200

0

40

80

120

160

200

240

280

320

360

ft

45°

65°75° 83° 88°

20 m

17 m

38 m41 m

35 m

32 m

29 m

26 m

23 m

25.7

m22

.7 m

66.8 m

63.8 m

60.8 m

57.8 m

55.1

m52

.1 m

49.1

m46

.1 m

43.4

m40

.4 m

37.4

m34

.4 m

31.7

m28

.7 m

Boom configuration for main boom lengths (17 m – 41 m) – see table on page 10

Jib configuration for jib lengths (22.7 m – 66.8 m)Length Amount of luffing jib extensions

Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 3 m 1 1 1 1 1 1 1 1

Luffing jib insert 6 m 1 1 1 1 1 1 1 1

Luffing jib insert 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4

Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib length (m) 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8

Page 13: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 13

Lift chart – luffing jib (No. 1309.xx) Main boom angle 88°, standard counterweight

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t7.7 34.810 27.4 24.511 25.1 22.4 20.312 22.7 20.8 19.2 15.714 19.5 18.0 16.7 14.9 12.715 18.0 16.6 15.6 14.4 12.3 9.716 16.7 15.5 14.7 13.4 12.1 9.4 8.117 15.7 14.6 13.8 12.7 11.5 9.2 7.9 6.320 13.0 12.1 11.5 10.7 10.0 8.5 7.4 5.924 10.6 9.9 9.4 8.8 8.2 7.4 6.7 5.432 7.3 6.9 6.5 6.0 5.5 5.0 4.338 5.7 5.3 4.9 4.5 4.0 3.544 4.4 4.0 3.6 3.3 2.850 3.4 3.0 2.6 2.255 2.5 2.2

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t7.9 29.210 24.4 21.011 22.5 19.6 17.513 19.1 17.2 15.8 14.114 17.9 16.2 14.8 13.2 11.715 16.6 15.1 13.9 12.6 11.2 9.016 15.4 14.1 13.2 11.9 10.7 8.8 7.418 13.7 12.7 11.7 10.7 9.6 8.4 7.2 5.824 10.0 9.2 8.7 8.0 7.3 6.6 5.8 4.932 6.8 6.4 5.9 5.4 4.9 4.4 3.838 5.3 4.8 4.4 4.0 3.6 3.144 4.1 3.7 3.2 2.9 2.548 3.3 2.8 2.5 2.150 3.1 2.7 2.355 2.3

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t8.1 25.910 22.8 19.012 19.7 17.2 15.313 18.3 16.0 14.4 12.814 17.2 15.1 13.7 12.2 10.515 16.0 14.3 12.9 11.6 10.2 8.216 15.0 13.4 12.3 11.0 9.7 8.2 6.818 13.4 12.0 11.0 10.0 8.9 7.8 6.6 5.324 9.9 8.9 8.3 7.6 6.8 6.1 5.3 4.532 6.7 6.2 5.7 5.2 4.6 4.1 3.438 5.2 4.7 4.3 3.8 3.3 2.844 4.0 3.5 3.1 2.7 2.346 3.4 2.9 2.5 2.150 3.0 2.5 2.255 2.2

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t8.3 21.811 19.0 15.512 18.1 14.7 12.913 17.0 14.1 12.3 10.514 16.3 13.5 11.9 10.2 8.716 14.5 12.3 10.9 9.4 8.2 6.917 13.7 11.8 10.5 9.0 7.9 6.6 5.618 13.1 11.4 10.0 8.7 7.6 6.4 5.4 4.424 9.8 8.7 7.9 7.0 6.2 5.3 4.4 3.634 5.6 5.7 5.2 4.7 4.0 3.5 2.838 5.1 4.6 4.1 3.6 3.1 2.544 3.9 3.5 3.0 2.6 2.146 3.3 2.8 2.4 2.050 3.0 2.5 2.155 2.2

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t8.4 18.711 16.3 13.412 15.5 12.7 11.213 14.7 12.1 10.7 9.114 14.0 11.6 10.3 8.8 7.516 12.6 10.5 9.3 8.1 7.0 6.017 11.9 10.0 9.0 7.8 6.8 5.7 4.818 11.4 9.6 8.6 7.5 6.5 5.5 4.7 3.720 10.5 8.8 7.8 6.9 6.0 5.1 4.3 3.524 9.1 7.5 6.7 5.9 5.2 4.4 3.7 3.034 5.1 5.2 4.5 3.9 3.2 2.7 2.138 4.7 4.1 3.5 2.9 2.442 3.7 3.2 2.6 2.144 3.6 3.1 2.550 2.7 2.2

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1(m) t t t t t t8.5 16.811 14.9 12.112 14.2 11.5 10.113 13.4 11.0 9.6 8.214 12.7 10.5 9.3 7.9 6.716 11.5 9.6 8.4 7.3 6.3 5.318 10.6 8.8 7.7 6.7 5.8 4.920 9.7 8.0 7.1 6.2 5.3 4.524 8.5 6.9 6.1 5.2 4.6 3.828 6.2 5.4 4.6 4.0 3.434 5.4 4.8 4.0 3.4 2.838 4.4 3.7 3.1 2.544 3.2 2.7 2.146 2.6 2.050 2.4

TLT 11943069 - M00000 V7

Page 14: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

14 LR 1110 – 1001.02

Lift chart – luffing jib (No. 1309.xx) Main boom angle 83°, standard counterweight

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

11.1 28.614 22.2 20.516 19.1 17.8 17.018 16.6 15.5 14.8 13.719 15.6 14.6 13.9 13.0 11.422 12.9 12.2 11.7 11.0 10.2 8.324 11.8 11.0 10.5 9.9 9.3 8.0 6.9 5.426 10.7 10.0 9.6 9.1 8.6 7.6 6.7 5.330 8.5 8.2 7.8 7.3 6.8 6.0 5.034 7.4 7.1 6.7 6.4 5.8 5.4 4.740 5.8 5.5 5.2 4.8 4.4 3.946 4.6 4.3 3.8 3.5 3.250 3.8 3.4 3.1 2.755 2.9 2.6 2.260 2.1

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

11.9 24.615 19.4 17.817 16.9 15.7 14.618 15.8 14.6 13.8 12.320 14.0 13.1 12.3 11.3 10.222 12.4 11.6 11.0 10.3 9.4 7.924 11.2 10.5 10.0 9.3 8.6 7.5 6.526 10.3 9.6 9.1 8.6 7.9 7.1 6.2 5.030 8.1 7.8 7.3 6.8 6.2 5.5 4.834 7.2 6.7 6.4 5.9 5.4 4.9 4.238 6.0 5.5 5.2 4.7 4.2 3.740 5.6 5.1 4.8 4.4 4.0 3.546 4.3 4.0 3.6 3.3 2.850 3.5 3.1 2.8 2.455 2.7 2.4

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

12.6 22.716 18.1 16.217 17.0 15.2 13.719 14.9 13.6 12.6 11.222 12.6 11.6 10.7 9.9 8.924 11.3 10.5 9.9 9.0 8.2 7.1 6.026 10.5 9.6 9.0 8.3 7.5 6.7 5.8 4.730 8.2 7.8 7.2 6.6 5.9 5.3 4.434 7.3 6.7 6.3 5.8 5.2 4.7 4.036 6.8 6.3 5.9 5.5 4.8 4.4 3.840 5.6 5.1 4.8 4.3 3.8 3.342 4.7 4.9 4.4 4.0 3.6 3.146 4.4 3.9 3.5 3.2 2.750 3.5 3.1 2.8 2.355 2.7 2.4

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

13.3 18.616 16.6 13.618 15.2 12.7 11.120 13.9 11.7 10.4 8.922 12.6 10.9 9.6 8.4 7.224 11.4 10.1 9.0 7.9 6.8 5.726 10.6 9.5 8.5 7.5 6.5 5.5 4.628 9.9 8.8 8.1 7.1 6.2 5.3 4.4 3.632 7.7 7.2 6.5 5.7 4.9 4.1 3.436 6.9 6.3 5.8 5.2 4.5 3.9 3.142 5.4 4.9 4.4 3.9 3.4 2.748 4.2 3.8 3.3 2.9 2.450 3.6 3.1 2.7 2.255 2.7 2.460 2.0

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

13.7 15.617 13.5 11.318 12.9 10.8 9.420 11.7 9.9 8.8 7.622 10.9 9.2 8.1 7.1 6.224 10.1 8.5 7.5 6.6 5.8 4.926 9.6 7.9 7.1 6.2 5.4 4.6 3.928 9.1 7.5 6.7 5.9 5.2 4.4 3.7 3.032 6.9 6.1 5.3 4.7 4.0 3.3 2.736 6.3 5.6 4.9 4.2 3.6 3.0 2.440 5.1 4.5 3.9 3.2 2.7 2.142 4.9 4.3 3.7 3.1 2.548 3.8 3.3 2.7 2.250 3.1 2.6 2.055 2.3

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1(m) t t t t t t

14.1 13.717 12.0 9.919 11.0 9.2 8.122 9.8 8.1 7.2 6.2 5.324 9.2 7.5 6.6 5.8 5.0 4.126 8.7 7.1 6.2 5.4 4.7 3.928 8.3 6.7 5.9 5.2 4.4 3.732 6.2 5.4 4.6 4.0 3.336 5.7 5.0 4.3 3.6 3.040 4.6 3.9 3.3 2.742 4.4 3.8 3.2 2.644 3.6 3.1 2.546 3.5 3.0 2.348 3.3 2.8 2.250 2.7 2.1

TLT 11943069 - M00000 V7

Page 15: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 15

Lift chart – luffing jib (No. 1309.xx) Main boom angle 75°, standard counterweight

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

16.4 19.022 13.5 13.124 12.1 11.8 11.526 10.9 10.7 10.5 10.028 9.9 9.7 9.5 9.1 8.732 8.1 7.9 7.7 7.4 6.934 7.5 7.3 7.1 6.9 6.4 6.036 6.9 6.7 6.5 6.3 5.9 5.5 4.740 5.8 5.6 5.4 5.1 4.7 4.342 5.4 5.2 5.0 4.8 4.4 3.946 4.5 4.3 4.1 3.8 3.448 4.1 4.0 3.8 3.5 3.150 3.7 3.5 3.3 2.955 2.9 2.7 2.560 2.4 2.2 2.0

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t18 16.022 13.0 12.126 10.5 10.1 9.628 9.6 9.3 8.9 8.430 8.7 8.5 8.2 7.7 7.332 7.7 7.6 7.2 6.8 6.236 6.6 6.4 6.2 5.8 5.3 4.938 6.1 5.9 5.7 5.4 4.9 4.5 4.040 5.5 5.3 5.0 4.6 4.2 3.742 5.1 4.9 4.7 4.3 3.9 3.444 4.7 4.5 4.4 4.0 3.6 3.148 3.9 3.8 3.5 3.1 2.750 3.6 3.5 3.2 2.9 2.555 2.9 2.7 2.4 2.060 2.2

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

19.5 13.524 10.9 10.126 10.0 9.2 8.830 8.3 7.9 7.5 7.032 7.3 6.9 6.4 5.934 6.8 6.4 5.9 5.5 5.036 6.2 6.0 5.5 5.1 4.6 4.138 5.8 5.6 5.1 4.7 4.2 3.840 5.3 5.2 4.8 4.4 3.9 3.5 3.042 4.8 4.5 4.1 3.6 3.2 2.744 4.5 4.2 3.8 3.4 3.0 2.546 4.1 3.9 3.6 3.1 2.7 2.348 3.7 3.4 2.9 2.5 2.150 3.4 3.1 2.7 2.455 2.6 2.3

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

21.1 11.426 9.1 8.428 8.4 7.7 7.230 7.8 7.1 6.7 6.132 7.2 6.6 6.1 5.634 6.1 5.7 5.2 4.736 5.7 5.3 4.8 4.3 3.838 5.3 4.9 4.5 4.0 3.5 3.140 5.0 4.6 4.2 3.7 3.2 2.8 2.342 4.6 4.3 3.9 3.5 3.0 2.6 2.144 4.0 3.7 3.2 2.8 2.346 3.8 3.4 3.0 2.6 2.248 3.2 2.8 2.450 3.0 2.7 2.255 2.2

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8(m) t t t t t t t

21.9 10.424 9.526 8.7 7.928 8.0 7.230 7.4 6.6 6.132 6.9 6.1 5.7 5.134 6.4 5.7 5.2 4.7 4.236 5.3 4.9 4.4 3.9 3.438 5.0 4.6 4.1 3.6 3.1 2.640 4.7 4.3 3.8 3.3 2.8 2.442 4.4 4.0 3.5 3.1 2.6 2.244 3.8 3.3 2.9 2.446 3.5 3.1 2.7 2.248 3.3 2.9 2.5 2.150 2.7 2.4

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1(m) t t t t t t

22.6 9.224 9.026 8.228 7.6 6.730 7.0 6.2 5.732 6.5 5.7 5.2 4.734 6.0 5.3 4.8 4.3 3.836 5.0 4.5 4.0 3.538 4.6 4.2 3.7 3.2 2.740 4.4 3.9 3.4 3.0 2.542 4.1 3.7 3.2 2.8 2.344 3.5 3.0 2.6 2.146 3.3 2.8 2.448 3.0 2.6 2.250 2.5 2.1

TLT 11943069 - M00000 V7

Page 16: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

16 LR 1110 – 1001.02

Lift chart – luffing jib (No. 1309.xx) Main boom angle 65°, standard counterweight

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

22.6 12.128 9.2 8.930 8.4 8.132 7.5 7.334 6.9 6.736 6.3 6.1 5.938 5.8 5.7 5.5 5.240 5.4 5.3 5.0 4.842 4.9 4.7 4.5 4.244 4.5 4.3 4.1 3.946 4.0 3.8 3.6 3.248 3.7 3.5 3.3 3.0 2.650 3.5 3.3 3.1 2.8 2.455 2.7 2.5 2.360 2.0

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8(m) t t t t t t t

25.1 9.932 7.2 6.834 6.6 6.3 6.136 5.8 5.638 5.4 5.2 4.940 4.9 4.8 4.542 4.6 4.4 4.2 3.944 4.1 3.9 3.6 3.246 3.8 3.6 3.3 2.948 3.5 3.3 3.1 2.7 2.350 3.1 2.9 2.5 2.255 2.3 2.1

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1(m) t t t t t

27.6 8.034 6.0 5.636 5.6 5.238 4.8 4.540 4.4 4.2 3.744 3.8 3.6 3.2 2.846 3.3 3.0 2.648 3.1 2.8 2.450 2.9 2.6 2.355 2.1

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4(m) t t t t

30.2 6.136 4.9 4.338 4.6 4.040 3.7 3.344 3.2 2.9 2.446 3.0 2.6 2.348 2.4 2.150 2.300

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4(m) t t t

31.4 5.338 4.2 3.540 3.9 3.3 2.842 3.1 2.644 2.8 2.546 2.6 2.348 2.4 2.1

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4(m) t t t

32.7 4.638 3.7 3.040 3.5 2.842 2.6 2.244 2.4 2.046 2.248 2.1

TLT 11943069 - M00000 V7

Page 17: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 17

Lift chart – luffing jib (No. 1309.xx) Main boom angle 45°, standard counterweight

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4(m) t t t t

32.8 6.536 5.742 4.244 3.946 3.448 3.250 2.9 2.755 2.2

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4(m) t t t37 4.638 4.440 4.146 2.948 2.750 2.3

Main boom 41 mJib length in (m)

Radius 22.7(m) t

41.3 3.142 3.044 2.8

Main boom 32 mJib length in (m)

Radius 22.7(m) t

43.4 2.444 2.446 2.2

TLT 11943069 - M00000 V7

Page 18: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

18 LR 1110 – 1001.02

Working range – luffing jib 78° – 15° (No. 1309.xx) Main boom angle 88° – 45°, swinging counterweight 90°

0

8

16

24

32

40

48

56

64

72

80

88

96

104

112m

816243240485664 0 m

0 ft4080120160200

0

40

80

120

160

200

240

280

320

360

ft

45°

65°75° 83° 88°

20 m

17 m

38 m41 m

35 m

32 m

29 m

26 m

23 m

25.7

m22

.7 m

66.8 m

63.8 m

60.8 m

57.8 m

55.1

m52

.1 m

49.1

m46

.1 m

43.4

m40

.4 m

37.4

m34

.4 m

31.7

m28

.7 m

Boom configuration for main boom lengths (17 m – 41 m) – see table on page 10

Jib configuration for jib lengths (22.7 m – 66.8 m)Length Amount of luffing jib extensions

Luffing jib foot 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib insert 3 m 1 1 1 1 1 1 1 1

Luffing jib insert 6 m 1 1 1 1 1 1 1 1

Luffing jib insert 11.7 m 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4

Luffing jib head 5.5 m 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

Luffing jib length (m) 22.7 25.7 28.7 31.7 34.4 37.4 40.4 43.4 46.1 49.1 52.1 55.1 57.8 60.8 63.8 66.8

Page 19: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 19

Lift chart – luffing jib (No. 1309.xx) Main boom angle 88°, swinging counterweight 90°

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t13 15.414 14.9 12.715 15.6 14.4 12.3 9.716 15.5 14.7 13.4 12.1 9.4 8.117 14.6 13.8 12.7 11.5 9.2 7.9 6.319 13.8 12.9 12.2 11.4 10.4 8.7 7.5 6.022 11.7 10.8 10.4 9.6 9.0 8.1 6.9 5.624 10.6 9.9 9.4 8.8 8.2 7.4 6.7 5.428 8.3 8.0 7.5 7.0 6.4 5.7 4.932 7.3 6.9 6.5 6.0 5.5 5.0 4.338 5.7 5.3 4.9 4.5 4.0 3.544 4.4 4.0 3.6 3.3 2.850 3.4 3.0 2.6 2.255 2.5 2.2

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

12.2 14.413 15.8 14.114 14.8 13.2 11.715 15.1 13.9 12.6 11.2 9.016 14.1 13.2 11.9 10.7 8.8 7.418 13.7 12.7 11.7 10.7 9.6 8.4 7.2 5.820 12.1 11.2 10.5 9.6 8.8 7.6 6.8 5.524 10.0 9.2 8.7 8.0 7.3 6.6 5.8 4.928 7.7 7.4 6.8 6.3 5.6 5.0 4.332 6.8 6.4 5.9 5.4 4.9 4.4 3.838 5.3 4.8 4.4 4.0 3.6 3.144 4.1 3.7 3.2 2.9 2.548 3.3 2.8 2.5 2.150 3.1 2.7 2.355 2.3

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

11.2 15.613 16.0 14.4 12.814 15.1 13.7 12.2 10.515 14.3 12.9 11.6 10.2 8.216 15.0 13.4 12.3 11.0 9.7 8.2 6.818 13.4 12.0 11.0 10.0 8.9 7.8 6.6 5.320 11.9 10.8 10.0 9.0 8.1 7.1 6.3 5.124 9.9 8.9 8.3 7.6 6.8 6.1 5.3 4.528 7.6 7.1 6.5 5.9 5.2 4.6 4.032 6.7 6.2 5.7 5.2 4.6 4.1 3.438 5.2 4.7 4.3 3.8 3.3 2.844 4.0 3.5 3.1 2.7 2.346 3.4 2.9 2.5 2.150 3.0 2.5 2.255 2.2

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t11 15.512 14.7 12.913 14.1 12.3 10.514 16.3 13.5 11.9 10.2 8.716 14.5 12.3 10.9 9.4 8.2 6.917 13.7 11.8 10.5 9.0 7.9 6.6 5.618 13.1 11.4 10.0 8.7 7.6 6.4 5.4 4.420 11.7 10.3 9.2 8.1 7.1 6.0 5.1 4.124 9.8 8.7 7.9 7.0 6.2 5.3 4.4 3.634 5.6 5.7 5.2 4.7 4.0 3.5 2.838 5.1 4.6 4.1 3.6 3.1 2.544 3.9 3.5 3.0 2.6 2.146 3.3 2.8 2.4 2.050 3.0 2.5 2.155 2.2

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

10.3 13.612 12.7 11.213 14.1 12.1 10.7 9.114 14.0 11.6 10.3 8.8 7.516 12.6 10.5 9.3 8.1 7.0 6.017 11.9 10.0 9.0 7.8 6.8 5.7 4.818 11.4 9.6 8.6 7.5 6.5 5.5 4.7 3.720 10.5 8.8 7.8 6.9 6.0 5.1 4.3 3.524 9.1 7.5 6.7 5.9 5.2 4.4 3.7 3.032 6.1 5.4 4.7 4.1 3.4 2.9 2.234 5.1 5.2 4.5 3.9 3.2 2.7 2.138 4.7 4.1 3.5 2.9 2.442 3.7 3.2 2.6 2.144 3.6 3.1 2.550 2.7 2.2

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1(m) t t t t t t

10.4 12.212 14.2 11.5 10.113 13.4 11.0 9.6 8.214 12.7 10.5 9.3 7.9 6.716 11.5 9.6 8.4 7.3 6.3 5.318 10.6 8.8 7.7 6.7 5.8 4.920 9.7 8.0 7.1 6.2 5.3 4.524 8.5 6.9 6.1 5.2 4.6 3.828 6.2 5.4 4.6 4.0 3.434 5.4 4.8 4.0 3.4 2.838 4.4 3.7 3.1 2.542 3.4 2.8 2.344 3.2 2.7 2.146 2.6 2.050 2.4

TLT 11943069 - M00000 V7

Page 20: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

20 LR 1110 – 1001.02

Lift chart – luffing jib (No. 1309.xx) Main boom angle 83°, swinging counterweight 90°

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

13.8 20.514 22.2 20.516 19.1 17.8 17.018 16.6 15.5 14.8 13.719 15.6 14.6 13.9 13.0 11.422 12.9 12.2 11.7 11.0 10.2 8.324 11.8 11.0 10.5 9.9 9.3 8.0 6.9 5.426 10.7 10.0 9.6 9.1 8.6 7.6 6.7 5.330 8.5 8.2 7.8 7.3 6.8 6.0 5.034 7.4 7.1 6.7 6.4 5.8 5.4 4.740 5.8 5.5 5.2 4.8 4.4 3.946 4.6 4.3 3.8 3.5 3.250 3.8 3.4 3.1 2.755 2.9 2.6 2.260 2.1

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

11.9 24.615 19.4 17.817 16.9 15.7 14.618 15.8 14.6 13.8 12.320 14.0 13.1 12.3 11.3 10.222 12.4 11.6 11.0 10.3 9.4 7.924 11.2 10.5 10.0 9.3 8.6 7.5 6.526 10.3 9.6 9.1 8.6 7.9 7.1 6.2 5.030 8.1 7.8 7.3 6.8 6.2 5.5 4.834 7.2 6.7 6.4 5.9 5.4 4.9 4.238 6.0 5.5 5.2 4.7 4.2 3.740 5.6 5.1 4.8 4.4 4.0 3.546 4.3 4.0 3.6 3.3 2.850 3.5 3.1 2.8 2.455 2.7 2.4

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

12.6 22.716 18.1 16.217 17.0 15.2 13.719 14.9 13.6 12.6 11.222 12.6 11.6 10.7 9.9 8.924 11.3 10.5 9.9 9.0 8.2 7.1 6.026 10.5 9.6 9.0 8.3 7.5 6.7 5.8 4.730 8.2 7.8 7.2 6.6 5.9 5.3 4.434 7.3 6.7 6.3 5.8 5.2 4.7 4.036 6.8 6.3 5.9 5.5 4.8 4.4 3.840 5.6 5.1 4.8 4.3 3.8 3.342 4.7 4.9 4.4 4.0 3.6 3.146 4.4 3.9 3.5 3.2 2.750 3.5 3.1 2.8 2.355 2.7 2.4

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

13.3 18.616 16.6 13.618 15.2 12.7 11.120 13.9 11.7 10.4 8.922 12.6 10.9 9.6 8.4 7.224 11.4 10.1 9.0 7.9 6.8 5.726 10.6 9.5 8.5 7.5 6.5 5.5 4.628 9.9 8.8 8.1 7.1 6.2 5.3 4.4 3.632 7.7 7.2 6.5 5.7 4.9 4.1 3.436 6.9 6.3 5.8 5.2 4.5 3.9 3.142 5.4 4.9 4.4 3.9 3.4 2.748 4.2 3.8 3.3 2.9 2.450 3.6 3.1 2.7 2.255 2.7 2.460 2.0

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

13.7 15.617 13.5 11.318 12.9 10.8 9.420 11.7 9.9 8.8 7.622 10.9 9.2 8.1 7.1 6.224 10.1 8.5 7.5 6.6 5.8 4.926 9.6 7.9 7.1 6.2 5.4 4.6 3.928 9.1 7.5 6.7 5.9 5.2 4.4 3.7 3.032 6.9 6.1 5.3 4.7 4.0 3.3 2.736 6.3 5.6 4.9 4.2 3.6 3.0 2.440 5.1 4.5 3.9 3.2 2.7 2.142 4.9 4.3 3.7 3.1 2.548 3.8 3.3 2.7 2.250 3.1 2.6 2.055 2.3

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1(m) t t t t t t

14.1 13.717 12.0 9.919 11.0 9.2 8.122 9.8 8.1 7.2 6.2 5.324 9.2 7.5 6.6 5.8 5.0 4.126 8.7 7.1 6.2 5.4 4.7 3.928 8.3 6.7 5.9 5.2 4.4 3.732 6.2 5.4 4.6 4.0 3.336 5.7 5.0 4.3 3.6 3.040 4.6 3.9 3.3 2.742 4.4 3.8 3.2 2.644 3.6 3.1 2.546 3.5 3.0 2.348 3.3 2.8 2.250 2.7 2.1

TLT 11943069 - M00000 V7

Page 21: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 21

Lift chart – luffing jib (No. 1309.xx) Main boom angle 75°, swinging counterweight 90°

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

16.4 21.622 15.3 14.524 13.7 13.0 12.526 12.4 11.7 11.4 10.828 11.3 10.8 10.3 9.9 9.332 9.1 8.8 8.4 8.1 7.234 8.5 8.2 7.8 7.5 6.9 6.036 7.9 7.6 7.3 6.9 6.5 5.9 4.740 6.7 6.3 6.1 5.7 5.3 4.542 6.2 5.9 5.6 5.3 4.9 4.446 5.3 5.0 4.6 4.4 3.848 4.9 4.7 4.3 4.1 3.650 4.4 4.1 3.8 3.460 2.6 2.6 2.365 2.1

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t18 18.422 14.8 14.026 12.0 11.6 11.228 10.9 10.6 10.3 9.730 9.5 9.7 9.5 8.9 8.432 8.9 8.7 8.3 7.8 6.936 7.6 7.4 7.2 6.8 6.3 5.638 7.0 6.9 6.7 6.4 5.9 5.3 4.442 6.0 5.8 5.6 5.1 4.7 4.144 5.6 5.4 5.2 4.8 4.4 3.948 4.7 4.5 4.2 3.9 3.450 3.9 4.2 3.9 3.6 3.255 3.5 3.3 3.1 2.760 2.8 2.6 2.265 2.2

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

19.5 15.724 12.7 11.826 11.6 10.8 10.430 9.6 9.3 8.8 8.332 8.6 8.2 7.7 7.234 7.9 7.6 7.1 6.7 6.136 7.3 7.1 6.6 6.2 5.7 5.240 6.3 6.1 5.8 5.4 4.9 4.5 4.042 5.7 5.5 5.1 4.6 4.2 3.744 5.3 5.1 4.7 4.3 3.9 3.446 4.9 4.7 4.5 4.0 3.6 3.248 4.4 4.2 3.8 3.4 2.950 4.1 3.9 3.6 3.2 2.755 3.3 3.1 2.7 2.360 2.6 2.3

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

21.1 13.326 10.7 9.928 9.9 9.2 8.730 9.2 8.5 8.0 7.332 8.4 7.9 7.4 6.934 7.3 6.9 6.4 5.936 6.9 6.4 5.9 5.5 4.938 6.4 6.0 5.5 5.1 4.6 3.940 6.0 5.7 5.2 4.7 4.2 3.8 3.042 5.5 5.3 4.9 4.4 3.9 3.5 3.046 4.7 4.3 3.9 3.5 3.0 2.548 4.1 3.7 3.2 2.8 2.350 3.8 3.5 3.0 2.6 2.255 3.0 2.6 2.260 2.2

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

21.9 11.626 10.3 8.730 8.8 8.0 7.132 8.2 7.4 6.9 5.934 7.5 6.9 6.4 5.7 4.936 6.5 6.0 5.5 4.7 3.938 6.1 5.6 5.1 4.6 3.8 3.140 5.7 5.3 4.8 4.3 3.7 3.042 5.4 5.0 4.5 4.0 3.6 2.9 2.244 4.7 4.2 3.8 3.3 2.9 2.246 4.4 4.0 3.6 3.1 2.7 2.148 4.2 3.8 3.3 2.9 2.550 3.6 3.2 2.7 2.355 2.8 2.360 2.0

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1(m) t t t t t t

22.6 9.228 8.5 7.030 8.1 6.7 5.932 7.8 6.4 5.7 4.834 7.3 6.2 5.4 4.7 3.936 5.9 5.2 4.5 3.838 5.7 5.0 4.3 3.7 3.040 5.4 4.8 4.1 3.5 2.942 5.1 4.6 4.0 3.4 2.844 4.4 3.8 3.3 2.646 4.2 3.6 3.1 2.548 3.9 3.5 3.0 2.450 3.3 2.8 2.355 2.560 2.1

TLT 11943069 - M00000 V7

Page 22: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

22 LR 1110 – 1001.02

Lift chart – luffing jib (No. 1309.xx) Main boom angle 65°, swinging counterweight 90°

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

22.6 13.928 10.6 10.330 9.7 9.432 8.6 8.436 7.4 7.2 7.038 6.8 6.7 6.4 6.240 6.3 6.2 6.0 5.842 5.8 5.6 5.4 5.144 5.4 5.2 5.0 4.746 4.8 4.6 4.4 4.148 4.5 4.3 4.1 3.8 3.450 4.2 4.0 3.8 3.6 3.255 3.4 3.2 3.0 2.760 2.6 2.5 2.265 2.0

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8 66.8(m) t t t t t t t t

25.1 11.432 8.4 8.034 7.7 7.4 7.236 6.8 6.638 6.3 6.1 5.940 5.9 5.7 5.542 5.5 5.3 5.1 4.844 4.9 4.7 4.5 4.146 4.6 4.4 4.2 3.848 4.3 4.1 3.9 3.6 3.250 3.8 3.6 3.4 3.055 3.0 2.8 2.5 2.160 2.3 2.100

Main boom 29 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1 55.1 60.8(m) t t t t t t t

27.6 9.434 7.2 6.836 6.6 6.338 5.8 5.640 5.4 5.2 4.842 5.0 4.8 4.444 4.7 4.5 4.2 3.746 4.2 3.9 3.548 3.9 3.6 3.3 2.850 3.6 3.4 3.1 2.6 2.255 2.8 2.6 2.260 2.1

Main boom 35 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1(m) t t t t t

30.2 7.536 6.0 5.538 5.6 5.140 4.8 4.442 4.5 4.144 4.1 3.8 3.446 3.8 3.6 3.1 2.748 3.3 2.9 2.550 3.1 2.8 2.455 2.3

Main boom 38 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1(m) t t t t t

31.4 6.738 5.3 4.640 4.9 4.3 3.944 3.8 3.4 2.946 3.6 3.2 2.748 3.3 3.0 2.5 2.150 2.8 2.455 2.0

Main boom 41 mJib length in (m)

Radius 22.7 31.7 37.4 43.4(m) t t t t

32.7 5.838 4.9 4.140 4.5 3.842 3.6 3.246 3.2 2.8 2.348 3.0 2.6 2.150 2.8 2.455 2.0

TLT 11943069 - M00000 V7

Page 23: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 23

Lift chart – luffing jib (No. 1309.xx) Main boom angle 45°, swinging counterweight 90°

Capacities in metric tonnes with luffing jib (No. 1309.xx) 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator’s cab or manual.

Main boom 17 mJib length in (m)

Radius 22.7 31.7 37.4 43.4 49.1(m) t t t t t

32.8 7.636 6.742 5.144 4.746 4.250 3.7 3.455 2.9 2.760 2.2

Main boom 23 mJib length in (m)

Radius 22.7 31.7 37.4 43.4(m) t t t t37 5.640 5.046 3.748 3.550 3.055 2.300

Main boom 29 mJib length in (m)

Radius 22.7 31.7(m) t t

41.3 4.042 3.944 3.650 2.5

Main boom 32 mJib length in (m)

Radius 22.7(m) t

43.4 3.344 3.246 3.00

TLT 11943069 - M00000 V7

Page 24: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

24 LR 1110 – 1001.02

Working range - fixed jib 15° and 30° (No. 0806.xx)

Main boom 88° – 45°

Boom configuration for boom lengths (20 m – 59 m) – see table 1 on page 10

Fixed jib configuration for fixed jib lengths (11 m – 32 m)Length Amount of fixed jib extensions

Fixed jib foot 5.5 m 1 1 1 1 1 1 1 1

Fixed jib insert 3.0 m 1 1 1 1

Fixed jib insert 6.0 m 1 1 2 2 3 3

Fixed jib head 5.5 m 1 1 1 1 1 1 1 1

Fixed jib length (m) 11 14 17 20 23 26 29 32

81624324048566472 0 m0

8

16

24

32

40

48

56

64

72

80

88

96m

0 ft4080120160200240

0

40

80

120

160

200

240

280

315ft

65°

88°83°75°

45°

20 m

38 m41 m

44 m47 m

50 m53 m

35 m

32 m

29 m

26 m

23 m

20 m23 m26 m29 m32 m

17 m

14 m

11 m

15°

30°

Page 25: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 25

Lift chart - fixed jib (No. 0806.xx)

Offset 15°, standard counterweight

Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 20 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t5.1 24.0

9 24.0 13.912 24.0 12.6 7.814 24.0 11.8 7.2 5.118 17.4 10.6 6.4 4.720 15.1 10.1 6.0 4.524 11.8 9.3 5.4 4.228 9.5 8.7 4.9 4.130 8.6 8.4 4.7 4.038 6.4 4.1 3.744 3.8 3.550 3.5

Main boom 26 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t5.3 24.0

9 24.0 13.612 23.6 12.4 7.714 22.1 11.7 7.3 5.118 17.1 10.7 6.5 4.724 11.6 9.5 5.5 4.228 9.3 9.0 5.1 4.032 7.6 8.1 4.7 3.934 6.9 7.4 4.6 3.844 4.8 4.0 3.650 3.2 3.655 3.4

Main boom 29 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t5.4 24.0

9 24.0 13.312 22.4 12.3 7.714 21.2 11.8 7.3 5.018 17.0 10.8 6.5 4.724 11.4 9.6 5.6 4.328 9.1 9.0 5.2 4.032 7.4 7.9 4.8 3.936 6.1 6.6 4.5 3.846 4.3 4.0 3.650 3.8 3.555 3.3

Main boom 44 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t5.9 20.310 18.7 11.712 17.9 11.3 7.315 16.6 10.8 6.9 4.818 15.1 10.2 6.5 4.624 10.3 9.3 5.7 4.332 6.7 6.9 5.1 4.040 4.4 4.8 4.6 3.748 2.9 3.3 3.5 3.550 2.6 3.0 3.2 3.255 2.3 2.5 2.760 2.1

Main boom 38 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t5.7 22.710 20.6 12.412 19.5 11.8 7.515 18.2 11.2 7.0 4.918 16.0 10.5 6.5 4.624 11.0 9.5 5.7 4.332 7.0 7.5 5.1 4.036 5.7 6.2 4.8 3.840 4.7 5.2 4.5 3.744 3.9 4.3 4.3 3.650 3.3 3.5 3.560 2.2 2.3

Main boom 32 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t5.5 24.010 22.6 12.812 21.4 12.2 7.714 20.4 11.7 7.2 5.018 16.8 10.7 6.5 4.724 11.3 9.5 5.7 4.232 7.3 7.8 4.9 4.036 6.0 6.5 4.6 3.840 5.0 5.4 4.4 3.648 3.8 4.0 3.555 3.0 3.260 2.6

Main boom 50 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t6.1 18.110 16.8 11.013 15.8 10.6 7.015 15.1 10.2 6.7 4.718 14.0 9.6 6.3 4.524 9.4 8.3 5.7 4.232 6.0 6.3 5.1 4.040 4.0 4.2 4.3 3.844 3.3 3.5 3.6 3.648 2.6 2.9 3.0 3.050 2.3 2.6 2.7 2.855 2.0 2.1 2.2

Main boom 53 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t6.2 17.010 15.9 10.613 15.0 10.3 6.915 14.2 9.9 6.6 4.618 13.5 9.3 6.2 4.524 9.0 7.9 5.6 4.232 5.7 5.9 5.1 3.936 4.6 4.8 4.9 3.740 3.7 3.9 4.0 3.644 3.0 3.2 3.3 3.448 2.4 2.6 2.7 2.850 2.1 2.4 2.4 2.5

Main boom 59 mFixed jib length in (m)

Radius 11 14 17 20(m) t t t t6.4 15.1

8 14.8 12.89 14.5 12.6 11.1

10 14.2 12.5 11.0 9.714 13.2 11.6 10.4 9.318 12.1 10.6 9.6 8.624 8.2 8.3 8.3 7.432 5.0 5.1 5.2 5.340 3.1 3.2 3.3 3.444 2.4 2.5 2.6 2.746 2.1 2.2 2.3 2.448 2.0 2.1

TLT 11943069 - M00000 V7

Page 26: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

26 LR 1110 – 1001.02

Lift chart - fixed jib (No. 0806.xx)

Offset 30°, standard counterweight

Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 17 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t7.7 24.014 20.2 10.418 17.7 9.4 5.322 13.5 8.7 4.9 4.124 12.0 8.4 4.7 4.026 10.7 8.2 4.5 3.928 9.7 8.0 4.3 3.930 8.7 7.8 4.2 3.834 7.5 3.9 3.738 6.5 3.8 3.744 3.7 3.650 3.6

Main boom 26 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t7.9 22.214 18.7 10.318 16.5 9.5 5.422 13.3 8.8 4.9 4.126 10.5 8.4 4.6 4.028 9.5 8.2 4.4 4.030 8.5 8.0 4.3 3.932 7.7 7.9 4.2 3.834 7.0 7.6 4.1 3.844 4.9 3.7 3.650 3.7 3.655 3.5

Main boom 29 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t

8 20.914 17.9 10.218 16.0 9.4 5.422 13.2 8.9 5.0 4.026 10.4 8.4 4.6 4.030 8.4 8.0 4.3 3.934 6.9 7.5 4.1 3.836 6.2 6.8 4.0 3.738 5.6 6.2 3.9 3.746 4.4 3.7 3.650 3.7 3.655 3.4

Main boom 44 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t8.6 15.715 13.9 9.2

18 13.2 8.6 5.3

22 12.0 8.0 5.0 4.0

30 7.7 7.3 4.5 3.8

34 6.3 6.7 4.3 3.7

38 5.1 5.6 4.1 3.7

42 4.1 4.7 4.0 3.6

46 3.3 3.9 3.9 3.6

50 2.6 3.2 3.4 3.5

55 2.4 2.7 2.9

60 2.0 2.3

Main boom 38 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t8.4 17.614 15.7 9.818 14.4 9.1 5.422 12.7 8.4 5.0 4.026 10.1 7.9 4.7 3.930 8.1 7.6 4.4 3.834 6.5 7.2 4.3 3.838 5.3 5.9 4.1 3.742 4.4 4.9 3.9 3.646 3.5 4.1 3.8 3.655 2.6 2.9 3.160 2.2 2.5

Main boom 32 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t8.1 19.714 17.3 10.118 15.7 9.4 5.422 13.1 8.8 5.0 4.026 10.3 8.2 4.6 3.930 8.3 7.8 4.4 3.934 6.8 7.4 4.2 3.838 5.5 6.1 4.0 3.640 5.0 5.6 3.9 3.650 3.5 3.7 3.655 3.1 3.360 2.6

Main boom 50 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t8.8 14.015 12.7 8.619 11.8 7.9 5.222 11.0 7.5 4.9 3.926 8.8 6.9 4.6 3.830 7.0 6.4 4.5 3.834 5.7 6.0 4.3 3.738 4.6 5.1 4.2 3.642 3.8 4.2 4.0 3.646 3.1 3.5 3.6 3.550 2.4 2.9 3.0 3.255 2.2 2.4 2.5

Main boom 53 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t8.9 13.215 12.1 8.319 11.2 7.7 5.122 10.6 7.3 4.9 3.828 7.5 6.5 4.5 3.832 6.0 6.0 4.4 3.736 4.8 5.3 4.2 3.640 3.9 4.3 4.1 3.544 3.2 3.5 3.7 3.548 2.6 2.9 3.1 3.250 2.3 2.6 2.8 2.955 2.2 2.3

Main boom 59 mFixed jib length in (m)

Radius 11 14 17 20(m) t t t t9.1 11.811 11.6 10.113 11.2 9.9 8.715 10.9 9.6 8.6 7.518 10.3 9.3 8.2 7.324 8.7 8.2 7.3 6.530 6.0 6.2 6.4 5.938 3.8 3.9 4.1 4.242 3.0 3.1 3.3 3.446 2.3 2.4 2.6 2.748 2.0 2.2 2.3 2.450 2.0 2.1

TLT 11943069 - M00000 V7

Page 27: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 27

Working range - fixed jib 15° and 30° (No. 0806.xx)

Main boom 88° – 45°, swinging counterweight 90°

Boom configuration for boom lengths (20 m – 59 m) – see table 1 on page 10

Fixed jib configuration for fixed jib lengths (11 m – 32 m)Length Amount of fixed jib extensions

Fixed jib foot 5.5 m 1 1 1 1 1 1 1 1

Fixed jib insert 3.0 m 1 1 1 1

Fixed jib insert 6.0 m 1 1 2 2 3 3

Fixed jib head 5.5 m 1 1 1 1 1 1 1 1

Fixed jib length (m) 11 14 17 20 23 26 29 32

81624324048566472 0 m0

8

16

24

32

40

48

56

64

72

80

88

96m

0 ft4080120160200240

0

40

80

120

160

200

240

280

315ft

65°

88°83°75°

45°

20 m

38 m41 m

44 m47 m

50 m53 m

35 m

32 m

29 m

26 m

23 m

20 m23 m26 m29 m32 m

17 m

14 m

11 m

15°

30°

Page 28: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

28 LR 1110 – 1001.02

Lift chart - fixed jib (No. 0806.xx)

Offset 15°, swinging counterweight 90°

Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 20 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t16 22.220 17.1 10.122 15.1 9.7 5.6 4.324 13.5 9.3 5.4 4.226 12.1 9.0 5.1 4.128 10.9 8.7 4.9 4.130 9.9 8.4 4.7 4.034 8.0 4.3 3.838 7.4 4.1 3.742 3.9 3.644 3.8 3.550 3.5

Main boom 26 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t15 21.518 19.4 10.719 18.1 10.5 6.320 16.9 10.2 6.2 4.524 13.2 9.5 5.5 4.228 10.7 9.0 5.1 4.030 9.7 8.7 4.9 3.932 8.8 8.5 4.7 3.934 8.0 8.3 4.6 3.844 5.7 4.0 3.650 3.2 3.655 3.6

Main boom 29 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t14 21.217 19.6 11.018 19.0 10.8 6.520 16.7 10.3 6.2 4.524 13.0 9.6 5.6 4.328 10.5 9.0 5.2 4.032 8.6 8.6 4.8 3.934 7.9 8.3 4.7 3.836 7.2 7.6 4.5 3.846 5.1 4.0 3.650 3.8 3.555 3.5

Main boom 44 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t11 18.414 17.0 10.916 16.3 10.6 6.717 15.9 10.4 6.6 4.620 14.8 9.9 6.2 4.528 9.7 8.8 5.4 4.236 6.5 6.9 4.9 3.844 4.4 4.9 4.4 3.750 3.3 3.7 3.9 3.655 3.0 3.2 3.360 2.5 2.765 2.1

Main boom 38 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t12 19.515 18.2 11.217 17.2 10.7 6.718 16.8 10.5 6.5 4.624 12.6 9.5 5.7 4.332 8.2 8.4 5.1 4.036 6.8 7.3 4.8 3.840 5.6 6.1 4.5 3.744 4.7 5.1 4.3 3.650 4.0 4.0 3.560 2.8 2.965 2.4

Main boom 32 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t13 21.016 19.2 11.118 18.4 10.7 6.519 17.8 10.5 6.3 4.624 12.9 9.5 5.7 4.228 10.4 9.0 5.3 4.132 8.5 8.7 4.9 4.036 7.1 7.5 4.6 3.840 5.9 6.4 4.4 3.648 4.6 4.0 3.555 3.7 3.560 3.2

Main boom 50 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t10 16.813 15.8 10.615 15.1 10.2 6.716 14.8 10.1 6.6 4.618 14.1 9.6 6.3 4.524 11.2 8.3 5.7 4.232 7.3 6.9 5.1 4.040 5.0 5.3 4.7 3.844 4.1 4.4 4.5 3.648 3.4 3.7 3.8 3.555 2.3 2.7 2.9 2.960 2.0 2.3 2.4

Main boom 53 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t10 15.913 15.0 10.314 14.6 10.1 6.716 13.9 9.7 6.5 4.618 13.5 9.3 6.2 4.524 10.7 7.9 5.6 4.232 7.0 6.7 5.1 3.940 4.7 5.0 4.7 3.644 3.9 4.1 4.2 3.548 3.2 3.5 3.6 3.355 2.1 2.5 2.6 2.760 2.1 2.1

Main boom 59 mFixed jib length in (m)

Radius 11 14 17 20(m) t t t t

9 14.510 14.2 12.511 13.9 12.3 10.812 13.6 12.0 10.7 9.516 12.6 11.2 10.1 8.920 11.7 10.2 9.1 8.128 7.8 7.9 7.6 6.936 5.1 5.2 5.3 5.344 3.4 3.4 3.5 3.648 2.7 2.8 2.9 2.950 2.4 2.5 2.6 2.655 2.0

TLT 11943069 - M00000 V7

Page 29: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 29

Lift chart - fixed jib (No. 0806.xx)

Offset 30°, swinging counterweight 90°

Capacities in metric tonnes with fixed jib (No. 0806.xx), 34 t counterweight + 17.5 t carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator‘s cab or manual.

Main boom 20 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t18 17.824 13.6 8.426 12.2 8.2 4.528 11.0 8.0 4.3 3.930 10.0 7.8 4.2 3.834 7.5 3.9 3.736 7.3 3.8 3.738 7.3 3.8 3.742 3.7 3.644 3.7 3.648 3.650 3.6

Main boom 26 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t17 16.922 14.9 8.824 13.4 8.6 4.726 12.0 8.4 4.6 4.028 10.8 8.2 4.4 4.030 9.8 8.0 4.3 3.932 8.9 7.9 4.2 3.834 8.1 7.7 4.1 3.842 6.2 3.7 3.644 5.7 3.7 3.650 3.7 3.655 3.6

Main boom 29 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t16 17.020 15.3 9.124 13.3 8.6 4.826 11.9 8.4 4.6 4.030 9.7 8.0 4.3 3.932 8.8 7.8 4.2 3.834 8.0 7.6 4.1 3.836 7.3 7.4 4.0 3.738 6.6 7.2 3.9 3.746 5.2 3.7 3.650 3.7 3.655 3.6

Main boom 44 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t13 14.518 13.2 8.620 12.7 8.4 5.124 11.9 7.8 4.8 3.932 8.2 7.2 4.4 3.836 6.7 6.9 4.2 3.740 5.5 6.1 4.1 3.644 4.5 5.1 3.9 3.648 3.7 4.3 3.8 3.550 3.4 3.9 3.8 3.560 2.3 2.6 2.965 2.0 2.3

Main boom 38 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t14 15.719 14.1 8.922 13.3 8.4 5.024 12.8 8.1 4.8 4.032 8.4 7.4 4.3 3.836 6.9 7.1 4.2 3.740 5.8 6.3 4.0 3.744 4.8 5.3 3.9 3.646 4.3 4.9 3.8 3.655 3.3 3.6 3.660 2.8 3.165 2.5

Main boom 32 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t15 16.920 15.0 9.122 14.3 8.8 5.024 13.2 8.5 4.8 4.028 10.6 8.0 4.5 3.932 8.7 7.6 4.3 3.836 7.2 7.3 4.1 3.738 6.5 7.1 4.0 3.640 6.0 6.5 3.9 3.650 4.3 3.7 3.655 3.7 3.660 3.2

Main boom 50 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t12 12.717 11.6 8.119 11.2 7.7 5.122 10.6 7.3 4.9 3.828 8.9 6.5 4.5 3.832 7.3 6.0 4.4 3.736 6.0 5.7 4.2 3.640 5.0 5.3 4.1 3.544 4.1 4.5 4.0 3.548 3.4 3.7 3.8 3.355 2.2 2.7 2.9 3.060 2.0 2.3 2.4

Main boom 53 mFixed jib length in (m)

Radius 11 20 26 32(m) t t t t12 12.717 11.6 8.119 11.2 7.7 5.122 10.6 7.3 4.9 3.828 8.9 6.5 4.5 3.832 7.3 6.0 4.4 3.736 6.0 5.7 4.2 3.640 5.0 5.3 4.1 3.544 4.1 4.5 4.0 3.548 3.4 3.7 3.8 3.355 2.2 2.7 2.9 3.060 2.0 2.3 2.4

Main boom 59 mFixed jib length in (m)

Radius 11 14 17 20(m) t t t t12 11.415 10.9 9.6 8.616 10.7 9.5 8.5 7.420 10.0 8.9 8.0 7.028 8.2 7.6 6.8 6.132 6.6 6.8 6.4 5.836 5.4 5.5 5.7 5.440 4.4 4.5 4.7 4.844 3.6 3.7 3.8 4.048 2.9 3.0 3.1 3.250 2.6 2.7 2.8 2.955 2.1 2.2 2.3

TLT 11943069 - M00000 V7

Page 30: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

30 LR 1110 – 1001.02

Notes

Page 31: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

LR 1110 – 1001.02 31

Notes

Page 32: Hydraulic lift crane LR 1110 EN - liebherr.com · (EN 13001-1; EN 13001-2). Ground pressure The actual ground pressure is calculated according to the configuration and position of

Liebherr-Werk Nenzing GmbH Dr. Hans Liebherr Str. 1, A-6710 Nenzing/Austria Tel.: +43 50809 41–473 Fax: +43 50809 41–499 [email protected] www.liebherr.com

LR 1

110

— 1

1921

430

— V

ersi

on

03

— 0

6/20

18 S

ubje

ct t

o ch

ang

e w

itho

ut n

otic

e.