Phụ lục : Cấu hình VPNL2

7342 ISAM FTTU Guide to VPN Services

For I-240W-P ONT

Table of contents

ContentsTable of contents........................................................................................................................1

VPN Service..............................................................................................................................2

A. Model.............................................................................................................................2

B. Configuration.................................................................................................................2

1. Create vlan..................................................................................................................2

a) Create Vlan Shub......................................................................................................2

b) Create Pon Vlan.......................................................................................................6

2. QoS Profile.................................................................................................................8

a) QoS marker..............................................................................................................8

b) QoS session............................................................................................................11

3 PQ Profile.................................................................................................................13

4 Bandwitdh Profile.....................................................................................................13

5 Create ONT...............................................................................................................15

6 Create Planned Card on ONT......................................................................................21

7 Create Ethernet Port on ONT......................................................................................23

8 Service Portal.............................................................................................................26

9 Service Flow..............................................................................................................28

VPN Service

A. Model

B. Configuration

1. Create vlan

a) Create Vlan Shub.Browse to Ne->InfrastStructure->Layer 2-> Vlan-> Create->Vlan Shub

Parameter: Vlan ID = 2451 Mode: residential bridge Port: NTA-1, LTA-1, LTB-1

Click Next:

Add ports:

After creation:

We could create shub vlan with CLI commandline:

configure vlan shub id 2451 mode residental-bridge name VPNconfigure vlan shub id 2451 egress-port network:1configure vlan shub id 2451 egress-port lt:1/1/1

b) Create Pon VlanBrowse to Ne->InfrastStructure->Layer 2-> Vlan-> Create->Vlan

Vlan ID: 2451

Parameter:

Tab general:

Configuration: mode Residential Bridge Tagging Mode: Stacked

After creation:

Create Vlan with TL1 commandline:

ENT-PONVLAN::PONVLAN-2451::::mode=rbdge,tagmode=stacked;

2. QoS Profile

a) QoS marker Browse to Infranstructure QoS QoS Marker Profile Create QoS Marker Profile

Profile ID: 5

Name: Flex_NoTag_Def2 Upstream parameter:

o General:

Mode: flexible Default Ethernet priority: Spare (2)

o Untagged frames:

Mode: transmit Ethernet Priority: use default ethernet priority

Downstream parameter: o General mode : strip tag

After creation:

Create QoS Marker profile by TL1:> ent-qos-markprof::5:::Flex_notag_def2:PROFTYPE=flexmode,DOT1P=2,UNTAGDS=XMITNOTAG,UNTAGUS=usedefpriority,PRITAGUS=USEDEFCVLAN,TPID=8100

b) QoS sessionBrowse to Infranstructure QoS QoS Session Profile Create QoS Session Profile

Paramter: Name: Flex_NoTag_Def2 Marker Profile: QoS Marker Profile:IACM5After Creation:

Use TL1:

ent-qos-essprof::5:::Flex_Notag:UPMARKPROFID=12,UPMARKPROFNM=Flex_notag

3 PQ ProfileBrowse to Ne->InfrastStructure->Transmission->Gpon-> Priority Queue Profile-> Create Priority Queue Profile.

Pbit0 Pbit7: Queue1 Queue1 : 0, Queue2 Queue8 : Not used

Use TL1:ENT-PROFILE-PQ::3:::MegaWAN:PQ1WEIGHT=0,DOT1P0PQ=1,DOT1P1PQ=1,DOT1P2PQ=1,DOT1P3PQ=1,DOT1P4PQ=1,DOT1P5PQ=1,DOT1P6PQ=1,DOT1P7PQ=1;

4 Bandwitdh ProfileBrowse to Ne->InfrastStructure->Transmission->Gpon-> Bandwitdh Profile-> Create

\

Name : Fiber_Wan2M Profile number : 3 CIR ,AIR, EIR : 2000 kb/s Delay tolerance: Default

After creation:

5 Create ONT After plug ONT in PON link, ONT will be appear in Discovered ONT area.

Browse to NE -> RACK -> SUBRACK -> SLOT -> PON -> Discovered ONT

Copy Serial number of ONT2 : ALCLF8A3D43F

To create ONT, browse to NE -> RACK -> SUBRACK -> SLOT -> PON -> ONT(provisioned) Create ONT

Then, create ONT2 and paste Serial Number in Indentification Tab :

In Tab General , change Administrative State to Unlocked , then Finish

To provisioned ONT, copy Active Software (ALCLF8A3D43F) to Planned Software ( Unplannded), then Apply.

6 Create Planned Card on ONT Browse to NE -> RACK -> SUBRACK -> SLOT -> PON -> ONT provisioned ->

ONT-> Create Planned Card

Planned Type: Fast Ethernet

7 Create Ethernet Port on ONT Browse to NE -> RACK -> SUBRACK -> SLOT -> PON -> ONT provisioned ->

ONT-> Planned ONT Card-> Create Ethernet port

ONT port: 1

Customer Vlan Id : 0 QoS Session Profile : QoS Session Profile:IACM5 DSCP-to Pbit Mapping : System –wide Default

8 Service PortalBrowse to Ne-> Rack->Subrack->Slot->Pon->ONT->ONT Provisioned->ONT-

>Planned ONT Card-> Service Portal.

Portal numer: 3

Parameters:

Vlan : 2451 Bandwidth Profile UP : Fiber_Wan2M Bandwidth Profile Down : Fiber_Wan2M

9 Service Flow Browse to NE -> RACK -> SUBRACK -> SLOT -> PON -> ONT provisioned ->

ONT-> Planned ONT Card-> Service Flow-> Create service flow

Service portal : Portal 3 Vlan: S2451 Bandwidth Profile Up : Inherited from Service Portal Bandwidth Profile Down : Inherited from Service Portal Priority Queue Profile : MegaWan Uni Vlan: Default Network Vlan : 3501

Following above steps, we can create 2 service flows on 2 ONTs for testing VPN service.

Note: must add static arp in each PC to run with Vlan in residential bridge.