of 5/5
HP LaserJet 1160 or 1320 Top Cover Replacement Written By: jrw01 HP LaserJet 1160 or 1320 Top Cover Replacement © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 5

HP LaserJet 1160 or 1320 Top Cover Replacement · TOOLS: Metal Spudger Set (1) Phillips #0 Screwdriver (1) PARTS: HP LaserJet 1160 or 1320 Top Cover (1) HP LaserJet 1160 or 1320 Top

  • View
    213

  • Download
    1

Embed Size (px)

Text of HP LaserJet 1160 or 1320 Top Cover Replacement · TOOLS: Metal Spudger Set (1) Phillips #0...

  • HP LaserJet 1160 or 1320 Top CoverReplacement

    Written By: jrw01

    HP LaserJet 1160 or 1320 Top Cover Replacement

    iFixit CC BY-NC-SA www.iFixit.com Page 1 of 5

  • TOOLS:Metal Spudger Set (1)

    Phillips #0 Screwdriver (1)

    PARTS:HP LaserJet 1160 or 1320 Top Cover (1)

    HP LaserJet 1160 or 1320 Top Cover Replacement

    iFixit CC BY-NC-SA www.iFixit.com Page 2 of 5

    http://www.ifixit.com/Tools/Metal-Spudger-Set/IF145-017-1http://www.ifixit.com/Tools/Phillips-0-Screwdriver/IF145-005-3file:///Item/HP_LaserJet_1160_or_1320_Top_Cover

  • Step 1 Left Side Cover

    Pull on the two tabs on the back of the printer to release the left side cover.

    Remove the cover by rotating it towards the front of the printer.

    Step 2 Right Side Cover

    With the printer turned so that the right side is facing upwards, use a metal spudger to disengage 3tabs holding the right side cover in place.

    Lift the cover off of the printer.

    HP LaserJet 1160 or 1320 Top Cover Replacement

    iFixit CC BY-NC-SA www.iFixit.com Page 3 of 5

  • Step 3 Back Cover

    Remove 4 screws on the back of the printer.

    Remove the back cover.

    Step 4 Top Cover

    Remove 2 screws on the back of the printer, one on the left, and one on the front.

    The second image shows the formatter removed, but it is not necessary to remove the formatter toreplace the top cover.

    HP LaserJet 1160 or 1320 Top Cover Replacement

    iFixit CC BY-NC-SA www.iFixit.com Page 4 of 5

  • To reassemble your device, follow these instructions in reverse order.

    This document was last generated on 2017-06-17 08:26:43 PM.

    Step 5 Top Cover

    Disconnect the control panel cableand remove the top cover.

    HP LaserJet 1160 or 1320 Top Cover Replacement

    iFixit CC BY-NC-SA www.iFixit.com Page 5 of 5

    HP LaserJet 1160 or 1320 Top Cover ReplacementWritten By: jrw01

    TOOLS:PARTS:Step 1 Left Side CoverStep 2 Right Side CoverStep 3 Back CoverStep 4 Top CoverStep 5 Top Cover