Hovap Hygienic centrifugal pumps

© 2012 pentair ltd. all rights reserved.

a complete range of hygienic pumps in stainless steel suitable for liquids with viscosity up to 500 mpa.s

Features

• standard electric motors available.• available in accordance with ateX

ce ex iig c t3/t4.• standard mechanical seals acc. en 12756

available.• Hygienic construction.• favorable npsH.• low noise.• easy and low cost maintenance.• High efficiency and capacities up to 200 m3/h

and discharge pressures up to 13 bar.• suitable for cip.• Wide variety on available options such as

heating jackets, frequency controllers, flushed seal, etc.

• available with unions, plane ends or flanges.• Designed and certified in accordance with

eHeDg recommendations.• product friendly treatment.

tecHnical data

motors (kW) 0.75 up to 55temperature (°c) 140 higher temperature seals

on requestconnections standard male part acc.

Din 11851 other connections sms,

rJt, Bs, tri-clamp Din 11864 (eHeDg), iDf or flange can be provided

General application

Designed for continuous operation on ‘thin’ liquids (milk, wine, cream, beer, wort, etc.).these pumps are suitable for liquids with viscosity up to 500 mpa.s.

Materials

according european Directive 1935/2004Wetted parts 1.4404/316lOther parts 1.4301seals- mechanical cs-sic, sic-sic- elastomers nBr, fpm, epDm, ptfeflushed seals availablefDa licensing

www.pentair.com/valves HovBa-0004-en-1308

2

gm

K

BD1

D2a

e1 ±

10

c H1/H2 J1/J2 f

3a

le2

±10

71 0.37 / 0.55 130 191 103 154 48 74 170 195 112 15580 0.75 / 1.1 160 200 77 210 76 102 215 240 125 16090s 1.5 170 210 126 210 86 102.5 221 256 140 18590l 2.2 170 210 101 210 86 102.5 246 281 140 185100l 3 180 230 144 260 98 108 268 310 160 245112 4 190 242 137 260 98 108 275 317 190 233132s 5.5 / 7.5 210 262 213 310 118 108 294 356 216 253132m 9.2 210 262 175 310 118 108 332 394 216 253160m 11 / 15 240 290 289 364 150.5 107.5 383 477 254 297160l 18.5 240 290 245 364 150.5 107.5 427 521 254 297180m 22 260 310 305 374 150.5 107.5 427 521 279 317200l 30 / 37 280 330 339 418 150.5 107.5 503 597 318 347225s 45 305 360 402 496 150.5 107.5 500 594 356 435

Hp 0215 1” Dn 25 1.5” Dn 40 93 30 42 61Hp 0715 1” Dn 25 1.5” Dn 40 119 55 72 70Hp 1515 1.5” Dn 40 2” Dn 50 162 55 74.5 70Hp 1232 1.5” Dn 40 2” Dn 50 172 70 89.5 90Hp 2532 2” Dn 50 2.5” Dn 65 188 70 91.5 90Hp 5032 2.5” Dn 65 3” Dn 80 200 70 95.5 90Hp 8032 3” Dn 80 4” Dn 100 215 70 105 90Hp 1250 1.5” Dn 40 2” Dn 50 187 70 89.5 105Hp 1251 1.5” Dn 40 2” Dn 50 187 70 89.5 105Hp 2550 2” Dn 50 2.5” Dn 65 203 70 93 105Hp 5050 2.5” Dn 65 3” Dn 80 220 70 98 105Hp 8050 3” Dn 80 4” Dn 100 220 70 101.5 105Hp 1280 1.5” Dn 40 2” Dn 50 197 70 89 130Hp 2580 2” Dn 50 2.5” Dn 65 213 70 91.5 130Hp 5080 2.5” Dn 65 3” Dn 80 240 70 97.5 130Hp 8080 3” Dn 80 4” Dn 100 240 70 100.5 130

Hovap Hygienic centrifugal pumpsHP PumP

overall diMensionsMotor Motor e1 e2 F G H1 H2 J1 J2 K liec kW

overall diMensionspump d1 d2 a B c M

imperial Metric imperial Metric

designthe Hp pump range is a solid stainless steel construction to meet the stringent international regulations in the various fields of hygienic requirements offering:- open impeller design- favorable npsH- eHedG approved- 3a approval- according ateX ce ex iig c t3

applicationDesigned for applications where high demands for smooth product handling and continuous operation are required.

dutyDischarge pressure up to 90 mflow rates up to 130 m3/hourtemperatures maximum 140°c higher temperatures

on request

e1 : standarde2 : 3aH1/J1 : single acting mechanical sealH2/J2 : Double acting mechanical seal

standard

3

impeller Hp pump

Hovap Hygienic centrifugal pumpsHP PumP

4

gn

K

BD1

D2a

e1 ±

10

cH1/H2 J

f

3a

le2

±10

m

80 0.75 / 1.1 190 210 317 210 51.5 102.5 240 / 240 125 16090 1.5 / 2.2 200 205 382 210 51.5 102.5 256 / 281 140 185100 3 185 215 454 260 56.5 107.5 310 160 233112 4 190 225 454 260 56.5 107.5 317 190 233132 5.5 / 7.5 / 9.2 210 245 569 310 56.5 107.5 356 / 356 / 394 216 253160 11 / 15 / 18.5 240 280 766 364 56.5 107.5 477 / 477 / 521 254 297180 22 260 300 826 374 56.5 107.5 521 279 317200 30 280 320 936 418 56.5 107.5 597 / 597 318 347225s 45 305 350 996 496 56.5 107.5 594 356 435

Hp-Z 1232 1.5” Dn 40 2” Dn 50 310 215 252 254 275Hp-Z 5032 2.5” Dn 65 3” Dn 80 310 275 316 254 295Hp-Z 2550 2” Dn 50 2.5” Dn 65 340 250 290 270 320Hp-Z 8050 3” Dn 80 4” Dn 100 380 308 355 270 340Hp-Z 8080 3” Dn 80 4” Dn 100 380 307 354 270 390

Hovap Hygienic centrifugal pumpsHP-Z PumP

overall diMensionsMotor Motor e1 e2 F G H1 H2 J K liec kW

overall diMensionspump d1 d2 a B c M n

imperial Metric imperial Metric

designthe Hp-Z self priming pump is specifically designed for handling entrained air at high capacities. the impeller is of open construction and all wetted parts are constructed with stainless steel (Din 1.4404/316l).

applicationthe design is suitable for c.i.p. and scavenge applications. additionally the pump can be applied on venting of suction lines and the handling of entrained air.

dutyDischarge pressure up to 60 mflow rates up to 130 m3/hourtemperatures maximum 140°c higher temperatures

on request

e1 : standarde2 : 3aH1 : single acting mechanical sealH2 : Double acting mechanical seal

standard

5

Hovap Hygienic centrifugal pumpsHP-Z PumP

impeller Hp-Z pump

6

gK

BD1

D2a

e ±1

0

c JH f

l

80 0.55 - 0.75 0.75 - 1.1 157 76 209 71 78 91 215 240 125 16090s 1.1 1.5 167 125 209 81 78 91 221 256 140 18590l 1.5 2.2 167 100 209 81 78 91 246 281 140 185100l 2.2 - 3 3 179 143 259 93 83 96 268 310 160 233112m 4 4 191 136 259 93 83 96 275 317 190 233132s 5.5 5.5 - 7.5 211 212 309 113 83 96 294 356 216 253132m 7.5 9.2 211 174 309 113 83 96 332 394 216 253160m 9.2 - 11 11 - 15 242 288 363 145 83 96 383 477 254 297160l 15 10.5 242 244 363 145 83 96 427 521 254 297180m 18.5 22 262 304 373 145 88 101 427 521 279 317200l 30 30 - 37 282 338 417 145 88 101 503 597 318 347225s 37 - 45 45 309 369 495 145 93 101 532 636 356 435250s 55 55 334 360 573 175 98 111 616 740 406 412280s 75 75 364 381 623 175 98 111 695 819 457 532

Hrn 32-160 1.5” Dn 40 2” Dn 50 160 80 118.5Hrn 40-160 2” Dn 50 2.5” Dn 65 160 80 120Hrn 50-160 2.5” Dn 65 3” Dn 80 180 100 143Hrn 65-160 3” Dn 80 4” Dn 100 200 100 146Hrn 32-200 1.5” Dn 40 2” Dn 50 180 80 118Hrn 40-200 2” Dn 50 2.5” Dn 65 180 100 139Hrn 50-200 2.5” Dn 65 3” Dn 80 200 100 141Hrn 65-200 3” Dn 80 4” Dn 100 225 100 145Hrn 80-200 4” Dn 100 5” Dn 125 250 125 177Hrn 32-250 1.5” Dn 40 2” Dn 50 225 100 137.5Hrn 40-250 2” Dn 50 2.5” Dn 65 225 100 138.5Hrn 50-250 2.5” Dn 65 3” Dn 80 225 125 165.5Hrn 65-250 3” Dn 80 4” Dn 100 250 125 167.5Hrn 80-250 4” Dn 100 5” Dn 125 280 125 171Hrn 40-315 2.5” Dn 65 3” Dn 80 280 125 171Hrn 50-315 3” Dn 80 4” Dn 100 280 125 172Hrn 65-315 4” Dn 100 5” Dn 125 280 125 176Hrn 125-315 - Dn 125 - Dn 150 355 140 196

Hovap Hygienic centrifugal pumpsHRN PumP

overall diMensionsMotor Motor - kW e F G H J K l

1500 rpm 3000 rpm single seal Quench Back to back single seal double seal

overall diMensionspump d1 d2 a B c

imperial Metric imperial Metric

designthis Hrn series is a robust stainless steel design to meet the strict international requirements regarding hygienic applications and offers:- wetted parts are made from stainless steel

(Din 1.4404/316l).- a closed impeller- spiral housing- efficiency up till 80%- favorable npsH- also available as eHeDg certified version

Hrn-e

applicationDesigned for continuous operation and suitable for ‘thin’ liquids (milk, wine, cream, beer, wort, etc.) with viscosity up to 500 mpa.s.

dutyDischarge pressure up to 130 mflow rates up to 200 m3/hourtemperatures maximum 140°c higher temperatures

on request

7

32-200

32-160

50-200

40-160

65-200 80-20040-200

n=3600

50-160

32-250 50-250 65-250 80-25040-250

120

100

80

60

40

30

10 20 30 40 60 80 100 120 140 180 200 Q - m /h3

50 100 200 300 400 500 600 Q - IGPM

50 100 200 300 400 500 600 800 Q - USGPM

H - m H - ft

350

300

250

200

150

100

32-200

32-160

50-200

40-160

65-200 80-20040-200

n=3000

50-160

32-250 50-250 65-250 80-25040-250

40-315 65-315

120

110

100

90

80

70

60

50

40

30

20

5 10 20 30 40 50 70 90 110 130 150 170 Q - m /h3

50 100 200 300 400 500 Q - IGPM

50 100 200 300 400 500 600 Q - USGPM

H - m H - ft400

350

300

250

200

150

100

75

50

Hovap Hygienic centrifugal pumpsHRN PumP

impeller Hrn pump

8

K C H

F

J

B

D1

E1±

10

A L

D2

Gg

K

B

D1

D2

ae

±10

c JH

f

lWa 80 0.75 / 1.1 160 363 210 31 282 125 175Wa 90s/l 1.5 / 2.2 - 3 170 444 210 37 312/337 140 185Wa 112m 4 - 5.5 190 497 260 44 355 190 233Wa 132s/m 7.5 / 9.2 - 11 210 594 310 55 374/412 216 253Wa 160m/l 15 / 18.5 - 22 240 720 364 58 429/473 254 297Wa 200l 30 - 37 280 860 418 58 538 318 347Wa 225m 45 305 955 496 58 583 356 435Wa 250m 55 330 1040 510 58 651 406 435

HrW 32-160 1.5” Dn 40 2” Dn 50 160 80 118HrW 40-160 2” Dn 50 2.5” Dn 65 160 80 120HrW 50-160 2.5” Dn 65 3” Dn 80 180 100 143HrW 65-160 3” Dn 80 4” Dn 100 200 100 146HrW 32-200 1.5” Dn 40 2” Dn 50 180 80 118HrW 40-200 2” Dn 50 2.5” Dn 65 180 100 139HrW 50-200 2” Dn 50 3” Dn 80 200 100 141HrW 65-200 3” Dn 80 4” Dn 100 225 100 145HrW 80-200 3” Dn 80 5” Dn 150 250 125 177HrW 32-250 1.5” Dn 40 2” Dn 50 225 100 138HrW 40-250 2” Dn 50 2.5” Dn 65 225 100 138HrW 50-250 2.5” Dn 65 3” Dn 80 225 125 165HrW 65-250 3” Dn 80 4” Dn 100 250 125 167HrW 80-250 4” Dn 100 5” Dn 150 280 125 170HrW 40-315 2” Dn 50 3” Dn 80 280 125 171HrW 65-315 4” Dn 100 5” Dn 150 280 125 176

Hovap Hygienic centrifugal pumpsHRW-HD PumP

overall diMensionsMotor Motor e F G H J K l

kW

overall diMensionspump d1 d2 a B c

imperial Metric imperial Metric

designthis high performance pump is designed to cater for high flow rates and high system pressures (up to 50 bar). the closed impeller is giving till 80% efficiency.all wetted parts are constructed from stainless steel (Din 1.4404/316l).

applicationthe design is suitable for high system pressures, ultra-filtration and reverse osmosis applications.

dutysystem pressure up to 50 barDischarge pressure up to 130 mflow rates up to 200 m3/hourtemperatures maximum 140°c higher temperatures

on request

9

32-200

32-160

50-200

40-160

65-200 80-20040-200

n=3600

50-160

32-250 50-250 65-250 80-25040-250

120

100

80

60

40

30

10 20 30 40 60 80 100 120 140 180 200 Q - m /h3

50 100 200 300 400 500 600 Q - IGPM

50 100 200 300 400 500 600 800 Q - USGPM

H - m H - ft

350

300

250

200

150

100

32-200

32-160

50-200

40-160

65-200 80-20040-200

n=3000

50-160

32-250 50-250 65-250 80-25040-250

40-315 65-315

120

110

100

90

80

70

60

50

40

30

20

5 10 20 30 40 50 70 90 110 130 150 170 Q - m /h3

50 100 200 300 400 500 Q - IGPM

50 100 200 300 400 500 600 Q - USGPM

H - m H - ft400

350

300

250

200

150

100

75

50

Hovap Hygienic centrifugal pumpsHRW-HD PumP

impeller HrW-HD pump

10

G

L

K C H J

F

D1

B

A

D2

E ±

10

g

K

BD1

D2a

e ±1

0

c JHf

l

112m 4 190 412 260 88 275 190 233132m 7.5 210 507 310 108 332 216 253

Za 18055 2.5” Dn 65 2.5” Dn 65 182 177 201Za 20066 3” Dn 80 3” Dn 80 191 191 220

Hovap Hygienic centrifugal pumpsZA PumP

overall diMensionsMotor Motor e F G H J K liec kW

overall diMensionspump d1 d2 a B c

imperial Metric imperial Metric

designthe Za pump range is a liquid ring design suitable for handling liquid/gaseous mixtures. all wetted parts are constructed from stainless steel according Din 1.4404/316l. the impeller is specially designed for scavenge applications.

applicationthe design is suitable for c.i.p., scavenge duties and the transfer of liquid/gaseous mixtures.

dutyDischarge pressure up to 32 mflow rates up to 40 m3/hourtemperatures maximum 110°c higher temperatures

on request

11

Hovap Hygienic centrifugal pumpsZA PumP

impeller Za pump

12

Double working internal mechanical seal with quench (unpressurized cooling liquid)

Double working external mechanical seal back to back (pressurized cooling liquid)

single working internal mechanical seal

single working external mechanical seal

Hovap Hygienic centrifugal pumpsSeAl coNfiguRAtioNS HP HRN