2
Stand the test of grime Honeywell Wing Union and Hammer Union pressure sensors are built rugged and oilfield tough to stand up to the rigorous demands of today’s oil and gas drilling applications and environments. And they have the sensitivity to ensure precise, reliable measurements every time. The result: Optimized drilling operations. Less downtime. And maximum productivity. Wing Union / Hammer Union Pressure Sensors

Honeywell Wing Union / Hammer Union Pressure Sensors - Stand … · 2015-06-12 · Title: Honeywell Wing Union / Hammer Union Pressure Sensors - Stand the Test of Grime Author: Honeywell

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Honeywell Wing Union / Hammer Union Pressure Sensors - Stand … · 2015-06-12 · Title: Honeywell Wing Union / Hammer Union Pressure Sensors - Stand the Test of Grime Author: Honeywell

Stand the test of grimeHoneywell Wing Union and Hammer Union pressure sensors are built rugged and oilfield

tough to stand up to the rigorous demands of today’s oil and gas drilling applications and

environments. And they have the sensitivity to ensure precise, reliable measurements

every time. The result: Optimized drilling operations. Less downtime. And maximum

productivity.

Wing Union / Hammer Union Pressure Sensors

Page 2: Honeywell Wing Union / Hammer Union Pressure Sensors - Stand … · 2015-06-12 · Title: Honeywell Wing Union / Hammer Union Pressure Sensors - Stand the Test of Grime Author: Honeywell

Today’s oil and gas exploration and drilling applications demand products built oilfield tough, to provide long term

reliability and accurate measurements, and above all to promote overall productivity in challenging environments both on land and off-shore.

Honeywell’s Wing Unions are designed to be rugged, yet sensitive, offering highly reliable and robust pressure sensors for measuring mud and media flow and a choice of sensor models which best fits your drilling environment.

Built on Honeywell’s 20-year, time proven one piece platform design, all models provide highly accurate and reliable data to help operators detect small changes in media flow pressure, allowing quick pressure adjustments during drilling to optimize oil withdrawal rates, profile potentially dangerous conditions, and increase the safety of the drilling experience.

For Any EnvironmentHoneywell offers several Wing Union pressure sensors to choose from – including sensors with higher accuracy for additional precision and sensitivity as well as sensors with a wider aperture design for use with today’s more viscous media blends.

Reliable and DurableAll-welded stainless steel construction with one-piece pressure element design of Inconel® X-750 wetted parts isolates abrasive and corrosive drilling media from sensitive internal electronics. Additionally the cage option provides extra electrical connection protection and durability (Models 425, 427, 435, 437).

Easy to Install and ServiceDesigned for quick field installation including horizontal or vertical mounting, with field-repairable connectors. Access to zero and span adjustments by removing the electrical connector to prevent ingress failures and deter tampering.

Designed for LongevityHit it and forget it—Honeywell’s class leading reliability plus 12-month calibration lets you install it and move on. Long in-service performance means less downtime, fewer field replacements and lower overall service costs.

Readily AvailableWhen you need a replacement in the field, we make it easy for you. We ship our most popular Wing Union configurations in less than five days, with other configurations available within two weeks.

Ideal for Demanding Land-Based and Off-Shore Applications Acidizing Choke manifold Fracturing and cementing Mud pumps / mud logging New well development and extraction Oil and gas drilling Service and cement trucks Standpipe Stimulation Well head measurement

Find out more

To learn more about Honeywell’s test

and measurement sensors for oil and

gas, call +1 614 850-5000,

email us at info.tm@honeywell or visit:

http://measurementsensors.honeywell.com

Honeywell Sensing and Control

1985 Douglas Drive North

Golden Valley, MN 55422

honeywell.com

008887-3-EN GLO IL50 Printed in USA. November 2014 © 2014 Honeywell International Inc. All rights reserved. ® Inconel is a registered trademark of Inco Alloys International, Inc. ® Weco is registered trademark of Fmc Corporation; Glenair is a registered trademark of Glenair. Inc.

WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. \While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.

Model 424 Model 425 Model 427 Model 435 Model 437

All-welded design featuring Inconel® X-750 wetted parts ü ü ü ü ü

Compatible with Weco® 2202 fittings ü

Compatible with Weco® 1502 fittings ü ü ü ü

High accuracy: ±0.1 %FSS BFSL ü ü

Standard accuracy: ±0.2 %FSS BFSL ü ü ü ü ü

Protective cage option ü ü

Free flow pressure port with wide aperture ü ü

On-board temperature sensor option ü

Optional 1-wire (with IS) or 2-wire (without IS) shunt calibration ü ü ü

High accuracy shunt calibration ü ü

Multiple electrical connectors ü ü ü ü

Intrinsically safe: CE, FM/CSA/ATEX approval ü ü

Intrinsically safe: CE, cFMus/ATEX/IEC Ex certification ü ü

RFI/EMI protected ü ü ü ü ü

Pressure ranges: 0 psi to 5000 psi; 0 psi to 6000 psi; 0 psi to 10000 psi; 0 psi to 15000 psi; 0 psi to 20000 psi; 0 bar to 350 bar; 0 bar to 400 bar; 0 bar to 700 bar; 0 bar to 1000 bar; 0 bar to 1350 bar (see datasheet for specific information)