Honeywell Sensing and Control Manual Switches

Manual Switches

For application help: call 1-800-537-6945. Honeywell 1 MICRO SWITCH Sensing and Control 1

Pushbuttons Pushbutton Panels

Toggles/Rockers

Manuals

Pushbutton panels. Low profile SLP pushbutton panels feature standardmatrices and custom arrays tailored to your requirements. They use a con-ductive rubber technology for operator feedback. Plus full-face LED light-ing and legends, and a variety of button sizes and colors.

Manual switches. Designed by industrial designers to achieve a balancebetween harmonious appearance and ergonomics, AML AdvancedManual Line has pushbuttons, paddles,and rockers; with LED, incandes-cent, and neon illumination. Plus matching indicators and LED annuncia-tors. A smaller cousin, MML Miniature Manual Line, offers many AML fea-tures in a space-saving size.

Pushbuttons. A wide array of different pushbutton families, many withlighted display and matching indicators. Includes Series 2, an easily as-sembled modular design with many color display/control options; low-cost DM pushbuttons and compact PB unlighted pushbuttons.

Toggles/Rockers. NT/TL, TS, TW and AT toggles, and NR/TP rockers fea-ture various degrees of sealing, choice of many circuitry combinations,and 2 or 3-position operation.

Typical Applications . . . . . . . . . . . . . . . . . . . . . . . . . . 2Index by Product Type . . . . . . . . . . . . . . . . . . . . . . . 3Selection Guides . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Catalog Listings/Order Guide . . . . . . . . . . . . . . 8-161Panel Design Guide . . . . . . . . . . . . . . . . . . . . . . . . 162Catalog Listing - Page Number Index . . . . . . . . . 170

Selectio

n

Courtesy of Steven Engineering , Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: (650) 588-9200 ! Outside Local Area: (800) 258-9200 ! www.stevenengineering.com

Manual Switches AML SeriesAdvanced Manual Line

18 Honeywell 1 MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945.

IN FRONT OF THE PANELCoordinated, attractive appearance.AML features innovations designed by in-dustrial designers to achieve the best bal-ance of human factors and aesthetic ap-pearance. Operator height, bezel size,and the compatibility of square and rect-angular shapes blend with other compo-nents to harmonize your panel. There’sno visual clutter to distract from man/machine communication.

This comprehensive line of lighted andunlighted manual controls features:1 Pushbuttons for high and

intermediate frequency functions;1 Rocker and paddle switches, with 2 or

3 positions, for less frequent controlfunctions;

1 Plus lighted indicators andannunciators which complementAML’s universal appeal.

Various controls can be matched withtheir functions to accommodate the mostnatural and efficient habit pattern reflex.Keylock operated switches can be usedto assure ‘‘authorized personnel only’’access.

Display flexibility. AML offers a choice offive legend sizes, four button heights, fullor split section display, and illuminationby incandescent lamps, LED’s or neons.Colors are bright and uniform, providing astrong definition and good visibility. (Non-illuminated devices have the same attrac-tive colors.)

Color display options include:1 Transmitted color — color can be

distinguished whether lamp is On orOff.

1 Dead front — display appears black,until illumination causes legend andcolor to appear.

1 Projected color — white display isdiffused with color when illuminated.

BEHIND THE PANELAML’s simple, cost effective design pro-vides many behind-panel benefits for thedesigner and installer/user.

Simple to install. They snap in from thepanel front individually or in vertical orhorizontal strips; or in subpanel mountedstrips and matrices that can be pre-as-sembled and pre-wired to assure accu-rate alignment and efficient panel build-ing.

Electrical flexibility. Solid state switcheswith Hall effect integrated circuits inter-face directly with microprocessors andother logic level devices. These IC’s werefirst applied in MICRO SWITCH solid statekeyboards. Today, many MICRO SWITCHproducts incorporate the Hall effect tech-nology to meet a wide range of positionsensing and manual control needs.

Electronic control switches with gold orsilver contacts, and 1, 2, or 4 poles, willhandle up to 3 amps. Including an encod-ed version which generates different bi-nary coded outputs merely by changingcam-keyed buttons.

Power duty switches meet line discon-nect application needs with10-amp push-buttons and 15-amp paddle and rockerswitches.

Easy to wire. All AML devices presentsingle level termination. This means fas-ter, easier, neater, and more economicalwiring. And there is a choice of solder,quick-connect, push-on, and printed cir-cuit termination.

MATING RECEPTACLESThe .110 × .020 quick-connect/solder ter-minal (types 2 and 8) is designed for usewith receptacles that comply with the ULstandard for insertion and withdrawalforces. Maximum insertion force is 12 lbs.max., withdrawal force is 14 lbs. These re-ceptacles are supplied by: AMP Inc.,Berg, Augat, Hollingsworth, MALCO,Zierick, and others. Refer to Thomas Reg-ister or the Yellow Pages for the location ofyour local supplier.


Applying Manual Controls and Displays


PANEL DESIGN

Adherence to good human factors princi-ples can help your product make goodfirst impressions as it is being evaluatedby your customers; and increase long-term user satisfaction. You can gain acompetitive edge that may translate intobetter acceptance by your customer andthe user.

The panel, being the surface provided fordisplay and control components, servesas the direct interface for human/machinedialogue. We’d like to offer the followingguidelines to help you achieve ergonom-ically pleasing panels where communica-tion flows operator-to-machine, and backagain.

PREPARATIONBegin with procedures common to anydesign process. Prepare a list of the re-quirements related to the job to be per-formed. Then ask yourself such ques-tions as:

1 What is the panel (control station) todo?

1 Who will be the users?1 Is there a special sequence of

procedures to follow?1 Are there special environmental

conditions or military requirements?1 Will the equipment be used inside or

outside; in a shop, home or office?1 Will barriers, guards or protective

shields be needed to safeguardcomponents and/or users?

1 Will the maintenance tasks beperformed by the equipment user or atechnician? How often and how easyto do?

1 Who will install or set up theequipment?

1 Are elaborate instructions required orcan you design to make themunnecessary?

1 What components are available?1 Will you do the specifying?1 What are the cost constraints?1 What elements should be added to

estimate total installed cost?

Explore as many alternate means ofachieving the desired results as possible.Then select the most effective combina-tion of components. The earlier the fore-going questions are asked and answeredin the concept or selection process, themore closely the panel design will matchthe requirements of a given application.

MATCH CONTROL TO FUNCTIONPeople expect controls to move in certainways. Where possible, component selec-tion should be an extension of normalhabit patterns. For example, the wall-mounted toggle switch found in homesconveys a habit pattern for turning onlights. The upward flipping motion gener-ally associated with ‘‘ON’’ can be usedwith other toggle, rocker and paddleswitches for a natural transfer of a previ-ously learned habit.

The clockwise motion of a rotary knob isfrequently used to select an appliancefunction, such as the desired washer cy-cle. This same familiar action may beadapted to a control panel as an exten-sion of a normal habit pattern.

When a panel uses control actions well-established in our daily lives:1 Reaction time is reduced.1 The first control movement by an

operator is usually correct.1 An operator can perform faster, and

can make adjustments with greaterprecision.

1 An operator can learn controlprocedures faster.

Pushbuttons (alternate-actionor momentary)

Push/pull switches Toggles for 2- or 3-position select

Paddles for 2- or 3-position select Rockers for 2- or 3-position select

Pushbutton and rotary pushbutton/selector Trackball and joystick controls for 3-D maneu-vering of CRT cursors in mapping or trackingtasks




PANEL DESIGN

COMPONENT ARRANGEMENTSome control panels become overlycomplex because of the number and dif-ferent types of components, or becausethe designer failed to explore enough al-ternative arrangements.

Before drawing the elements on a paneloutline, it is helpful to make paper cutoutsof the separate switches, indicators, etc.These cutouts can be easily shifted intovarious groups, and relationships untilthe most effective arrangement is found.You will save hours of tedious drawing,erasing and redrawing, and shouldachieve a better layout. Also, you aremore likely to resist the temptation to stoplooking for the optimal solution too earlyin the design process.

Here are some suggestions for good ar-rangement:

1. Frequently used components shouldbe the most accessible.– for manually operated controls,

somewhere between elbow andshoulder height.

– for displays, nearest the normal lineof sight.

2. Arrange controls and displays for aconventional sequence of operation,left-to-right and top-to-bottom, just aswe normally read.

3. Define functional areas by leavingspace between component groups.Avoid outline borders, color patchesand brackets extending from group ti-tles (except in cases of extreme densi-ty.)

4. Locate emergency controls and dis-plays prominently on the panel to as-sure easy viewing and access by theoperator.

5. Where large layouts are necessary,distribute the workload between bothhands of the operator — for ease of op-eration and increased productivity.

6. Locate displays above (preferable) orto the left of corresponding manualcontrols to prevent visual interferencewhile the manual controls are beingoperated. (When manual controls areat the extreme left of a panel, displaysshould be above the controls.)

Alternative panel layouts. These before-and-after views illustrate how an existing de-sign may be upgraded to better communicate through layout revision and componentsubstitution. Both function and appearance are improved.

For example, the left hand panel uses outline frames to unnecessarily separate relatedfunctions. The frames serve merely as a decorative feature and contribute to a crowdedlook. In the right hand panel, the frames are eliminated, as the components themselvesdefine their functional space.

The uniform use of square and rectangular panel elements in the right hand panelserves to futher simplify and harmonize the appearance. Note that the UNIT FAULTindicators and the analog meter are located in the top half of the panel to help preventthe operator’s hand from obscuring them when the controls are being used. ThePOWER switch-indicator combination eliminates the separate POWER ON light. Also,legends appear above their respective components, rather than in the left hand ver-sion’s random arrangement.

Reference/Ind

ex




PANEL DESIGN

GRAPHICS CONSIDERATIONSPanel graphics need not overwhelm theoperator with their size, since they arenormally viewed at about arm’s length.

Legibility is reinforced when the colorchosen for the graphics contrasts strong-ly with the background. Type is most leg-ible when it is shown as dark lettering on alight panel.

Panel TitlesTitles applied to the panel itself shouldnormally appear above the controls toprevent them from being obscured whena control is in use. An exception would bewhen panel components must be placedat a height that would block the operator’sline of sight to the title.

If different-sized components are used ina horizontal array, pick a common base-line for all their associated titles to avoid astepped, disorderly look.

Whenever possible, apply graphics di-rectly on the manual controls or lighted in-dicators themselves. This not only con-serves valuable panel space, but en-hances overall design flexibility.Recommended graphic colors for com-ponent surfaces are white on red, green,and blue; black on yellow and white; andwhite or black on amber.

Alphanumeric and symbol legends canbe added or easily changed merely by re-placing a switch or indicator button, lens,or rocker-button operator.

Type Selection. All titles should be com-posed of a simple sans serif typeface foroptimum clarity (see examples, at right).Lettering should be horizontal, never ver-tical. Type sizes should conform to panelcomponent priorities (refer to typical let-ter heights for titles in descending order,as shown on page 184).

Avoid abbreviations whenever possible;spell out the entire word. If horizontalspace is tight, try condensed type, butuse it consistently, not interspersed with astandard width type. Inconsistent use ofthe type styles, sizes, or line weights addvisual ‘‘noise’’ to the overall panelscheme and should be avoided.

Layout and graphic design considerations

Typeface Examples

Helvetica Medium (This is the preferred type proportion and weight for most titles).

Helvetica Medium Condensed

Helvetica Bold




PANEL DESIGN

Strip barriers between switcheshelp to preventinadvertent operation.

Full barriers surround pushbuttonswhere more switchprotection is desired.

ILLUMINATED COLOR TECHNIQUES

Transmitted color achieved with colored lens(color is visible even when display isunlighted).

Projected color achieved with colored filterbehind white lens (color not visible until lampis lighted).

Hidden legend/hidden color (dead front).Dark lens hides color/message until displayis lighted.

Hinged guards over pushbuttons in high riskcontrol situations. Guards may also belocked for additional security.

Transmitted color refers to the use of col-ored buttons in applications when the col-or must be apparent when the display islighted or unlighted.

Projected color is achieved with a whitelens and a color filter/lens. When thelamps are off, the display is white. It be-comes colored when illuminated. Thougheffective in dimly lit or dark rooms, the col-or signal tends to weaken in high ambientlight.

Dead front is a hidden legend/color dis-play which generally uses a transparent,smoky gray lens with a legend on a colorinsert. The display appears black and un-abtrusive when the lamps are off. Whenilluminated, color and legend appear.

Ready-to-install low-profile push-button matrices can serve as panelelements or an entire panel. Intelli-gence can be provided by on-boardmicroprocessors which terminate toa plug-in connector.

Reference/Ind

ex




PANEL DESIGN

TYPE SIZESThe type sizes chosen should always cor-respond to the functional priorities of thecontrol panel components, in a descend-ing order, e.g., Panel Title, Group Title,Station Title. Individual application re-quirements may vary, but grossly over-sized letters should be avoided (seedrawing).

COLOR CODINGFollow accepted human factor standardswhen you color code interface compo-nents. Since many colors relate to certainwell established meanings, e.g., red forSTOP, green for GO, they should be usedwherever appropriate.

Color Meanings Examples

Red Alerts an operator that an incompatible or dangerous Stop, No-go, Error, Failure, Malfunction,condition exists and corrective action should be taken. Danger, Warning, Hazard, Take Cover

Yellow Marginal condition exists Pressure Below Normal, Check Hopper Level,Caution, Inspection Port Open

Green Monitored equipment is in tolerance, or a condition is On, Power On,* Go-ahead, Safe, Readysatisfactory and it is all right to proceed

Blue May use as an advisory indicator, but has limited coding High Beam (automobile headlights)value; however blue is ideally suited for use at peripheryof vision where it can be apparent, but not intrusive

White Indicates system conditons or transitions, neither positive Boiler #1 On Line, Reservoir Cyclingnor negative; doesn’t imply success or failure

* Note: The power generating industry is an exception, since it traditionally has used the color red to indicate Power On.Their rationale is that red connotes a ‘‘hot’’ electrical condition. However, green is definitely the preferred humanfactors choice for Power On indication.

PANEL FINISHNon-reflecting, matte-textured colorsfrom light gray to black, beige, and whitewill yield a panel that contrasts well withcontrols and indicators of any color. Neu-tral color backgrounds will focus attentionon the controls. But color effectiveness ismuted when interface components aresurrounded by a panel of a like or similarcolor.

When in doubt, keep it simple and in goodtaste – and you will achieve the most sat-isfying, long-term results.

FINAL EVALUATIONPrior to finalizing your design, evaluate the total panel layout experimentally. Assess itscommunication effectiveness with a test situation, using a mock-up or prototype. De-scribe the application to typical operators, individually.

Observe the procedures used by the operators. If there are basic design errors, theyshould show up, along with the operator’s preferences for certain control features.Separate individual prejudices from valid criticisms. Then apply the data to a revisedlayout. Check and recheck.

In actual practice, there are normally several revisions made beyond an initial propos-al. Rarely, if ever, does the first scheme prove acceptable as the final design; so don’tbe disheartened when new insights from associates or test results necessitate change.Even after a design goes into production, it is not unusual for revisions to be madebecause of undiscovered problems.




FEATURES1 Complete selection of pushbutton,

rocker and paddle (toggle type)switches accommodates differentfunctions and promotes operatorefficiency.

1 Solid state, electronic, and powerduty control.

1 Full or split screen incandescentdisplay switches and indicatorsprovide vivid transmitted color,projected color (for neutral displaywhen unlit), and dead front (hiddencolor).

1 Wide-angle visibility LED and linevoltage neon display switches andindicators.

1 Annunciators back-lighted by LED’senable high density message display.

1 Keylock switches available forcontrolled access applications.

1 All AML terminations at the sameshallow depth (1.7 in. /43,1 mm) forconvenient wiring or PC boardtermination.

1 Snap-in surface mount or sub-panel(hidden bezel) mount with mountinghardware.

1 Pad printed legends with a clearpolyurethane overcoat available in achoice of five standard sizes.

1 Metric design for worldwide accept-ance.

1 UL recognized, CSA certification.1 Selected listings are certified by VDE,

CEE, SEV, and FINKO (for compliancestatus, contact the 800 number.

MICRO SWITCH AML Advanced ManualLine combines functional flexibility withelectrical versatility to provide a broadrange of options to choose from.

EASY TO RELAMP

Relamping of T-1-3/4 incandescentAML91 lamps is accomplished from thefront of the panel without tools. (AML92T-1-3/4 LEDs can be added in the samemanner.)

FULL GUARD BEZEL OPTION

As an alternative to standard height be-zels (.06 in./1,5 mm), pushbutton switch-es can be furnished with full guard bezelsextending .19 in./5.0 mm from the mount-ing surface. In the free position, standardbuttons are flush with full guard bezels.

The raised bezel guards against acciden-tal operation by someone leaning againstor dropping something on a control con-sole.

High Intensity LEDs For Full-face AML Lighted DisplayAML92 Series

1 Full-face illumination for high visibility lighted colors.1 Advanced illumination technology combines high-intensity LED in standard

T-1-3/4 wedge base lamp package.1 Easy plug-in installation in AML lighted switches and indicators.1 Low operating temperature permits high density, continuous operation with

minimal heat build-up.

AML92 Series LEDs have a quad chip assembled in a T-1-3/4 wedge base lamppackage. They provide full-face illumination when used with lighted pushbutton,rocker and paddle switches, or indicators equipped with incandescent lampsockets. For ordering information, refer to page 59.

Manuals




AML CHARACTERISTICSAML 10 Series AML 20 Series AML 30 Series AML 40 Series

Electrical/Mechnical Life* N/APushbuttons–Momentary 1,000,000 100,000 25,000 ---Pushbuttons–Alternate 25,000 25,000 25,000 ---Rockers 25,000 25,000 25,000 ---Paddles 25,000 25,000 25,000 ---

Agency Ratings(May not apply to everyseries division)UL File E53576 File E12252 File E12252 File E58932CSA File LR4442 File LR4442 File LR4442 File LR4442VDE None File 0630/10.78+ File 0630/10.78++ None

Rating 1710 Rating 1710No. 4275.5788 No. 4275.5788

*95% Survival+ Exception: Four-Pole AML’s are not included in VDE Approval++ Exception: Only the 2-pole AML33 and AML34 are certified by VDE

AML ELECTRICAL DATA1 AML10 Series

Electrical Characteristics Absolute Maximum Rating4

Switching TimeMax.

OutputLeakage Voltage

Integrated Supply Output Current Rise Fall Supply Externally LoadsCircuit Current Voltage max. 10% to 90% to Voltage Applied to to Storage

Function (Max.) (Operated) (Released) 90% 10% (VS) Output Output Temperature

5 VDC 3.5 mA +.4 Volt 2.0 µA 1.0µsec 1.0µsec –.5 to +7.0 –.5 Volt min. 20 mA –40°C toSinking1 (Released) (Sinking (Sinking (Sinking VDC +15 Volts max. (Sinking) +65°C

6.5mA 8 mA) 8 mA) 8 mA) 0° to +65°C (Off condition) (–40° to(Operated — (+32° to +149°F)

no load) +149°F)

6-16 VDC 6.5 mA @ + .4 Volt 20 µA 1.5µsec 0.5µsec –1.2 to +20 +20 VDC max. in 40 mA –40°C toSinking2 6 VDC. (Sinking (Sinking (Sinking VDC Off condition only +65°C

10.0 mA @ 20mA 20 mA) 20 mA) –0.5 VDC min. in (–40° to16 VDC max.) Off or On +149°F)

(Plus load condition.current)3

4.5-24 VDCSinking

5 V7.0 mA

(Released)24 V

9.0 mA(Released)

14.0 mA(Operated-

no load)

+.4 Volt(Sinking10 mA)

10 µA 1.5 µ sec(Sinking10 mA)

0.5 µ sec(Sinking10 mA)

–30 to +30VDC

–0.5 Volt min. +24Volts max. (Off

condition)

20 mA(Sinking)

–40−C to+65°C (–40°to +149°F)

5 VDC Scan 3.8 mA @ .6Vmax. input at

Logic ‘‘0’’

2.4 VDCmin.

(Sourcing11 mA)

1.0 µA 1.5 µ sec(Sourcing

5 mA)

1.5 µ sec(Sourcing

5 mA)

–.5 to +7.0VDC

–.5 VDC min.7.0 max.

(Off Condition)

25 mA(Scan)

–40°C to+65°C(–40° to+149°F)

1 Over temperature range of 0° to +55°C (+32° to 2 Over temperature range of 0° to +55°C (+32° to 4 As with all solid state components, performance can be+131°F) and supply voltage of 4.5 to 5.5 VDC. +131°F) and supply voltage of 16 VDC. expected to deteriorate as rating limits are approached;

however, they will not be damaged unless the limits areexceeded.

3 At 24°C. (+75°F)

1 AML20 Series

Contacts Voltage Current Load Type

Silver 250 VAC 2 Amps 75% Power Factoror 125 VAC 3 Amps 75% Power Factor

Gold-plated Silver 24 VDC 2 Amps Resistive

Gold 125 VAC/DC 100 mA Resistive

1 AML30 Series

CurrentVoltage Pushbuttons Rockers or Paddles Load Type

125 VAC 10 amps 15 amps 60% power factor

250 VAC 10 amps 15 amps 60% power factor


Manual Switches AML SeriesMounting Dimensions (For Reference Only)


AML11/12 and 21/22 SWITCHES Note: Top of full guard bezel housing AML27 SWITCHESAML41C/D and AML42C INDICATORS .19/5,0 from panel.

PUSHBUTTONSKEYLOCK

For terminal locations, see page 62.For terminal locations, see page 63.

AML14/16 and AML24/26 SWITCHES AML13/15 and 23/25 SWITCHES

ROCKERS PADDLES

For terminal locations, see page 62, 63. For terminal locations, see page 62, 63.

AML41 INDICATOR AML42 INDICATOR TERMINAL TYPES

LENS STYLE MINIATURE

For terminal locations, see page 62.

NOTE1 Dimensions are mm or mm/IN

IN

Solder Hole will accept two #22 AWG Strand-ed Conductor (per NEMA publication DC-21976)




AML31/32 SWITCHES AML34/36 SWITCHES

PUSHBUTTON ROCKER

AML33/35 SWITCHES TERMINAL LOCATIONS

PADDLE PUSHBUTTON ROCKER AND PADDLE

AML43 INDICATORS PANEL CUTOUT FOR SINGLE-STATIONFRONT-OF-PANEL MOUNTING

Recommended panel thickness: .060-.187/1,52-4,75

NOTES1 Dimensions are mm or mm/IN

IN

Manufacturers logo on this side of housing

Solder Hole Will Accept One #14 AWG Stranded Conductor(Per NEMA Publication DC-2 1976)

PANEL PUNCH FOR AML SERIESA panel punch is manufactured by Greenlee-Textron Tool Co.,Rockford, IL (815-926-3011).

Manuals




TERMINAL LOCATIONS FOR AML10 SWITCHES

PUSHBUTTONS

Solder and Quick-Connect Printed Circuit

Illuminated devices shown (non-illuminated devices do not have lamp terminals).

ROCKERS AND PADDLES


One Integrated Circuit Two Integrated Circuits One Integrated Circuit Two Integrated Circuits

Illuminated devices shown (non-illuminated devices do not have lamp terminals)

TERMINAL LOCATIONS FOR AML41 INDICATORS

Solder and Quick-Connect

1 IncandescentLamp Circuit

1 IncandescentLamp Circuit

2 IncandescentLamp Circuits

2 IncandescentLamp Circuits

1-3 IncandescentLamp Circuits

Printed Circuit

1 Incandescent 1 Incandescent 2 Incandescent 2 Incandescent 1-3 IncandescentLamp Circuit Lamp Circuit Lamp circuits Lamp Circuits Lamp Circuits

TERMINAL LOCATIONS FOR AML42 INDICATORS


1 LED Circuit 1 LED Circuit 1 LED Circuit1 LED Circuit

NOTE1 Dimensions are MM or MM/IN

INManufacturer’s logo on this side ofhousing

4 – Lamp terminals are not provided fornon-illuminated devicespositive terminal ident. (+) marked thisside of housing1 – lamp termination identified by ‘‘B’’.2 – lamp termination identified by ‘‘A’’

and ‘‘C’’.




TERMINAL LOCATIONS FOR AML20 SWITCHES

PUSHBUTTON SWITCHESSolder or Quick-Connect

Terminal identification marked on each adja-cent side of housing

KEYLOCK SWITCHES

Solder or Quick-Connect

Printed Circuit

1 Pole 4 Pole2 Pole

PUSHBUTTON SWITCHESPrinted Circuit

1 Pole2 Pole

4 Pole

1 Pole 2 Pole

ILLUMINATED ROCKERS AND PADDLESSolder or Quick-Connect

Printed Circuit

1 Pole 2 Pole 1 Pole 2 Pole

NON-ILLUMINATED ROCKERS AND PADDLESSolder or Quick-Connect Printed Circuit

1 Pole 2 Pole 4 Pole

Manuals




ANNUNCIATORS

AML45 SERIES

Manufacturer’s logo on this side of housing

For panel punch manufacturer, see page 61.




MULTI-STATION FRONT-PANEL MOUNTING

Panel cutouts (See page 61 for panel punch manufacturer.)

Square Switches & Indicators Rect. Switches & Indicators Annunciator

(.8) (No. of units) — .045* (1.20) (No. of units) — .045* (.40) (No. of units) — .045*(20,3) (No. of units) — 1,14* (30,5) (No. of units) — 1,14* (10,1) (No. of units) — 1,14*

For each barrier, add .053/1,35 * Note: If barriers are used, do not subtract .045 in./1,14 mm from the panel cutoutformula. (.045 in./1,14mm is the allowance for the width of the bezel.)

AML61 MULTI-STATION SUBPANEL MOUNTING

Panel cutouts for AML61

Mounting BracketOrientation Width Length

A* in. .810mm 20,57 (.810)(No. of units)

B in. .810mm 20,57 (1.210)(No. of units)

C or D* in. 1.210mm 27,94 (.810)(No. of units)

*More than two cans with mounting brackets required for stripsof more than 10 units.

AML61 MOUNTING CENTERS

Mounting Centers/Number of CansMounting BracketOrientation 1 2 3 4 5 6 7 8 9 10 11 12

‘‘A’’ or ‘‘C’’ in. 1.285 2.095 2.905 3.715 4.525 5.335 6.145 6.955 7.765 8.575 9.385 10.195mm 32,64 53,21 73,79 94,36 114,94 135,51 156,08 176,66 197,23 217,81 238,38 258,95

‘‘B’’ in. 1.685 2.895 4.105 5.315 6.525 7.735 8.945 10.155mm 42,80 73,53 104,27 135,00 165,74 196,48 227,20 257,94

‘‘D’’ or ‘‘E’’ in. on CL .807 1.614 2.421 3.228 4.035 4.842 5.649 6.456 7.263 8.070 8.877mm on CL 20,50 41,00 61,49 81,99 102,49 122,99 143,48 163,98 184,48 204,98 225,48

Tolerance J ±.015

C

D

E

B

A

Manuals




AML75 PANEL SEAL ACCESSORY

Panel cutoutsMultiple panel sealed units should not bemounted together in a single elongatedslot, since this would create an unsealedspace between each unit.

Side-by-side mounting can be achieved,per the center-to-center dimensionsshown in the drawing. (Dotted lines indi-cate the seal bases which are abutting atfront of panel.)

AML75 seals are not designed for usewith the AML61 mounting system.

NOTE: Suggested cutout dimensions arebased on an .125N/3,18 mm panel thick-ness. Individual preferences for inpanel fit

may require measurement of assembliesbefore panels are cut.

AML76 SWITCH GUARD ACCESSORY

PANEL CUTOUTS


Manual Switches AML11 SeriesSolid State Pushbutton


INCANDESCENT OR NON-LIGHTED DISPLAY

Buttons ordered separately.

FEATURES1 Hall effect reliability.1 Provides low voltage signals that

interface with nearly all DC logic levelloads.

1 5 VDC, 6-16 VDC and 4.5-24 VDCsupply voltage.

1 Full guard bezel option.1 Lamps can be furnished installed or

ordered separately.1 UL recognized.1 Lamp circuit independent of switch

circuit.

AML11 ORDER GUIDEAML11 B B A 2 AA

HousingType

Standard Bezel:AML11B Square Non-LightedAML11C Square 1 Lamp Ckt.AML11E Rect. Non-LightedAML11F Rect. 1 Lamp Ckt.AML11G Rect. 2 Lamp Ckts.

Full Guard Bezel:AML11H Square Non-LightedAML11J Square 1 Lamp Ckt.AML11K Rect. Non-LightedAML11L Rect. 1 Lamp Ckt.AML11M Rect. 2 Lamp Ckts.

BezelColor

BBlack

IncandescentLamp Type

ANo LampInstalled

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

TerminalType

2.110 × .020(Solder or

Quick-Connect)

3.025 H .025

(PrintedCircuit, orPush-On)

CircuitryCodes

5 VDCSinking

AAMomentary

Action

AEAlternate

Action

6-16 VDCSinking

BAMomentary

Action

BEAlternate

Action

5 VDCScan**

CAMomentary

Action

CEAlternate

Action

4.5-24VDC

Sinking

DAMomentary

Action

DEAlternate

Action

* Lamps will be installed per each lamp circuitspecified in the Housing Type.

** See ‘‘Scan Switches,’’ next page.

Example: AML11BBA2AASquare pushbutton switch housing, non-lighted; black bezel; .110 × .020 termination;momentary action; current sinking output for use with 5 volt supply.

CURRENT SINKING OUTPUTAML10 SERIES

A permanent magnet plunger moves ad-jacent to the Hall effect integrated circuitto give a digital, current sinking normallyhigh output.

Manuals


Manual Switches AML12 SeriesSolid State Pushbutton


LED DISPLAY

LED ‘‘window’’ buttons ordered separately.

LEDs are not replaceable.

FEATURES1 Hall effect reliabilty (Refer to facing

page for electrical specifications.)1 Rectangular, high efficiency LED’s

give flush display area and wide angleindication.

1 Available with or without diodeprotection for the LED’s.

1 5 thru 24 VDC devices have aninternal resistor to maintain LEDcurrent at nominal 20 mA.

Electrical Data Page 20Buttons Page 43, 44Lamps and LEDs Page 59Accessories Page 57, 58Mounting Dimensions Page 60, 62

1 LED circuit independent of switchcircuit.

1 UL recognized.

AML12 ORDER GUIDEAML12C B B 2 AA

Housing TypeStandard Bezel:

AML12C Square 1 LED

Full Guard Bezel:AML12J Square 1 LED

BezelColor

BBlack

LED Color/Voltage

RedB V*C 5 VD 10 VE 15 VF 24 V

YellowH V*J 5 VK 10 VL 15 VM 24 V

GreenR V*S 5 VT 10 VW 15 VX 24 V

Terminal Type/Diode Protection

2.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Circuitor Push-On)

8.110 × .020With DiodeProtection

CircuitryCodes

5 VDCSinking

AAMomentary

Action

AEAlternate

Action

6-16 VDCSinking

BAMomentary

Action

BEAlternate

Action

5 VDCScan**

CAMomentary

Action

CEAlternate

Action

4.5-24VDC

Sinking

DAMomentary

Action

DEAlternate

Action* See LED application information for devices

without current-limiting resistor, page 59.

Example: AML12CBB2AASquare pushbutton switch housing;black bezel; red LED; .110 × .020 termina-tion; current sinking output for use with 5volt supply; momentary action.

AML11/12 HALL EFFECT SCAN SWITCHES

Scan switches interface directly with aport expander and microcomputer to op-erate either in a scan matrix or as an indi-vidual function switch with a level sourc-ing signal (emitter follower). Scanning isused to look at each switch in a matrix tosee which stations are active. The scanmatrix significantly lowers overall powerconsumption, since each switch requirespower only while being strobed.

In the scanned mode, the minus supplyconnection becomes the scanning inputconnection. When this input is high, theswitch is de-energized and does not con-sume power. When the scan input is low,the switch will draw current as it normallydoes when energized. If the button is de-pressed when the scan input is low, theoutput will be high. The output remainslow if the button is not depressed duringthe scan cycle.

ELECTRICAL DATACircuitry Termination

Dotted lines denote rectangular housing.1 The ‘‘MICRO SWITCH’’ identification is shown on

this side of the switch housings.


Manual Switches AML13 SeriesSolid State Paddle



Covers ordered separately.

FEATURES1 Hall effect reliability.1 Provides low voltage signals that

interface with nearly all DC logic levelloads.

1 5 VDC and 6-16 VDC supply voltage.1 2 or 3-position operation.1 Toggle type paddle operators

permanently installed in rectangularhousings.

1 Covers for the switch housing may belighted or unlighted.

1 UL recognized.1 Lamps can be furnished installed or

ordered separately.1 Lamp circuit independent of switch

circuit.

AML13 ORDER GUIDEAML13 E B A 2 AA 01

Housing Operator/Bezel Incandescent Terminal Circuitry OperatingType Color Lamp Type Type Code Action

AML13 ERectangularNon-Lighted

AML13 FRectangular

1 Lamp Ckt. (A)

AML13 GRectangular2 Lamp Ckts.

(A & B)

BBlack/Black

ANo LampInstalled

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

2.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Ckt.,or Push-On)

One IC (Ckt. A):AA

5 V Sinking

BA6-16 V Sinking

DA4.5-24 VDC

Sinking

Two IC’s(Ckts. A & B):

AC5 V Sinking

BC6-16 V Sinking

DC4.5-24 VDC

Sinking

Insert CodeNumbers from

OperatingAction Chart

1 The ‘‘MICRO SWITCH’’identification is shown

on this side of the switchhousing.

* Lamps will be installed per each lamp circuit specified in the Housing Type.

Example: AML13EBA2AA01Rectangular non-lighted paddle switchhousing; black paddle and bezel; .110 ×.020 terminals; with one 5 V sinking ICpack; two position operation.

OPERATING ACTION

2 Position:

01Maint. None Maint.

02Mom. None Maint.

03Maint. None Mom.

3-Position:**

04Maint. Maint. Maint.

05Mom. Maint. Mom.

06Maint. Maint. Mom.

07Mom. Maint. Maint.

** 3-position switches must have two circuits spec-ified in the listing (circuitry codes ‘‘AC’’ or ‘‘BC’’).

Coversorderedseparately

Manuals


Manual Switches AML15 SeriesSolid State Paddle


LED DISPLAY

Covers with LED ‘‘window’’ ordered separately.


FEATURES1 Hall effect reliabilty.1 Rectangular, high efficiency LED’s

give flush display area and wide angleindication.

1 Available with or without diodeprotection for the LED’s.

1 5 thru 24 VDC devices have aninternal resistor to maintain LEDcurrent at nominal 20 mA.


1 UL recognized.

Electrical Data Page 20Paddle Covers Page 48, 49Lamps Page 59Accessories Page 57, 58Mounting Dimensions Page 60, 62

AML15 ORDER GUIDEAML15 F B B 2 AA 01 R X

Housing Operator LED Terminal Type/ Circuitry Operating LED Color LED ColorType Bezel Color Voltage Diode Protection Code Action (LED A) (LED B)

AML15 FRect.1 LED

AML15 GRect.

2 LED’s

BBlack/Black

BV*

C5 V

D10 V

E15 V

F24 V

2.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Circuit,or Push-On)

8.110 × .020

w/Diode Protectionfor LED

One IC(Ckt. A):

AA5 V Sinking

BA6-16 V Sinking

DA4.5-24 VDC

Sinking

Two IC’s(Ckts. A & B):

AC5 V Sinking

BC6-16 V Sinking

DC4.5-24 VDC

Sinking

InsertCode

Numbersfrom

OperatingActionChart

RRed

YYellow

GGreen

XNo LED

RRed

YYellow

GGreen

XNo LED

* See LED application information for devices without current-limiting resistor, page 59.

Example: AML15FBB2AA01RXRectangular paddle switch housing withone LED, without resistor, black paddleand bezel; .110 × .020 terminals, with one5 V sinking IC pack; 2-position operation.

CIRCUIT OUTPUT STATES

Ckt. LowA (operated) High High

Ckt. LowB High High (operated)

Switch basetermination

1 The ‘‘MICRO SWITCH’’ identification is on this side of the switch housing.


Manual Switches AML21 SeriesElectronic Control Pushbutton




FEATURES1 1, 2, or 4 poles.1 Silver or gold contacts.1 Full guard bezel option.1 Momentary or 2-level alternate action

(push-on, push-off).1 UL recognized, CSA certified.1 Lamps can be furnished installed or

ordered separately.1 Lamp circuit independent of switch circuit.

AML21 Series: 1 pole and 2-poleonly.

AML21 ORDER GUIDEAML21 B B A 2 AA

Housing Bezel Incandescent Terminal Circuitry CodesType Color Lamp Type Type (Each pole has double-throw)

Standard Bezel: B A 2 Silver Mom. ActionAML21B Square Non-LightedAML21C Square 1 Lamp Ckt.AML21E Rect. Non-LightedAML21F Rect. 1 Lamp Ckt.AML21G Rect. 2 Lamp Ckts.

Full Guard Bezel:AML21H Square Non-LightedAML21J Square 1 Lamp Ckt.AML21K Rect. Non-LightedAML21L Rect. 1 Lamp Ckt.AML21M Rect. 2 Lamp Ckts.

Black No LampInstalled

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Ckt. orPush-On)

Contacts AA 1-PoleAC 2-PoleCC 4-Pole

Alt. ActionAB 1-PoleAD 2-PoleCD 4-Pole

GoldContacts

Mom. ActionBA 1-PoleBC 2-PoleDC 4-Pole

Alt. ActionBB 1-PoleBD 2-PoleDD 4-Pole

Gold-PlatedSilver

Contacts

Mom. ActionEA 1-PoleEC 2-Pole

Alt. ActionEB 1-PoleED 2-Pole


Example: AML21BBA2AASquare pushbutton switch housing non-lighted; black bezel; .110 × .020 termina-tion; momentary action; 1-pole, double-throw; silver contacts.

Manuals


Manual Switches AML22 SeriesElectronic Control Pushbutton


LED DISPLAY

Buttons with LED ‘‘window’’ ordered separately.


FEATURES1 Identical to AML21 switches, except

furnished with high efficiency LEDdisplay.

1 Rectangular LED’s are flush withbutton surface, providing wide angleindication.

1 Optional diode protection for LED’s.1 5 thru 24 VDC LED devices have an

internal resistor to maintain current atnominal 20 mA.

1 UL recognized, CSA certified.1 LED circuit independent of switch

circuit.

Electrical Data Page 20Buttons Page 43, 44Lamps Page 59Accessories Page 57, 58Mounting Dimensions Page 60, 63

AML22 Series: 1 pole and2-pole only.

AML22 ORDER GUIDEAML22 C B B 2 AA

Housing Bezel LED Color/ Terminal Circuitry CodesType Color Voltage Type (Each pole has double-throw)

Standard Bezel: B Red 2 Silver Mom. ActionAML22C Square 1 LEDAML22H Square 1 High-

Profile LED (For use withAML52-A buttons)

Full Guard Bezel:AML22J Square 1 LED

Black B V*C 5VD 10VE 15VF 24V

YellowH V*J 5VK 10VL 15VM 24V

GreenR V*S 5VT 10VW 15VX 24V

.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Ckt.,or Push-On)

8.110 × .020With DiodeProtection

for LED

Contacts AA 1-PoleAC 2-PoleCC 4-Pole

Alt. ActionAB 1-PoleAD 2-PoleCD 4-Pole

GoldContacts

Mom. ActionBA 1-PoleBC 2-PoleDC 4-Pole

Alt. ActionBB 1-PoleBD 2-PoleDD 4-Pole

Gold-PlatedSilver

Contacts

Mom. ActionEA 1-PoleEC 2-Pole

Alt. ActionEB 1-PoleED 2-Pole

* See LED information for devices without current limiting resistor, page 59.

Example: AML22CBB2AASquare pushbutton switch housing withone LED, black bezel; red LED (withoutresistor); .110 × .020 termination; mo-mentary action, 1-pole, double-throw; sil-ver contacts.

CONTACT ARRANGEMENT

1, 2 or 4 poles: Form C


Manual Switches AML23 SeriesElectronic Control Paddle



Covers ordered separately.

FEATURES1 Silver or gold contacts.1 1, 2 or 4 poles.1 Toggle type paddle operators


1 Covers for the switch housing may belighted or unlighted.

1 UL recognized, CSA certified.1 Lamps can be furnished installed or


circuit.

Electrical Data Page 20Paddle Covers Page 48Lamps Page 59Accessories Page 57, 58Mounting Dimensions Page 60,63



Housing Operator/Bezel Incandescent Terminal Circuitry OperatingType Color Lamp Type Type Codes Action

AML23 E B A 2 Insert Codeletters asshown in

Circuitry Chart

Insert Code numbersfrom Operating

Action ChartRectangular Black/Black No Lamp

Installed

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Ckt.,or Push-on)

Non-Lighted

AML23 FRectangular

1 Lamp Ckt. (A)


(A & B)


1 The ‘‘MICRO SWITCH’’identification is shownon this side of theswitch housings.

Example: AML23EBA2AA01Rectangular non-lighted paddle switchhousing; black paddle and bezel; .110 ×.020 terminals; with one circuit ON andone circuit OFF in each extreme operatorposition (maintained).

CIRCUITRY

Silver Gold 2-Position 3-PositionContacts Contacts

AA BA

AC BC

(Non-illuminatedswitches only)

CA DA

CC DC


OPERATING ACTION

2-Position:


02Mom. None Maint.

03Maint. None Mom.

3-Position:


05Mom. Maint. Mom.



Manuals


Manual Switches AML24 SeriesElectronic Control Rocker

30 Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada


Rocker operators ordered separately.

FEATURES1 Silver or gold contacts.1 2 or 3 position operation.1 UL recognized, CSA certified.1 Lamps can be furnished installed or


circuit.

Electrical Data page 19Rockers page 51Lamps page 58Accessories pages 56, 57Mounting Dimensions pages 59, 62

* *

*AML24 Series: 1 pole and2-pole only.


Housing Bezel Incandescent Terminal Circuitry OperatingType Color Lamp Type Type Codes Action

AML24 E B A 2 Insert Codeletters asshown in

Circuitry Chart

Insert Code numbersfrom Operating

Action ChartRectangular Black No Lamp

Installed

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

.110 × .020(Solder or

Quick-Connect)

3.025 × .025

(Printed Ckt.,or Push-on)

Non-Lighted

AML24 FRectangular

1 Lamp Ckt. (A)


1 The ‘‘MICRO SWITCH’’identification is shownon this side of theswitch housings.


Example: AML24EBA2AA01Rectangular non-lighted rocker switchhousing; black bezel; .110 × .020 termi-nals; with one circuit ON and one circuitOFF in each extreme operator position(maintained).

CIRCUITRY

Silver Gold 2-Position 3-PositionContacts Contacts

AA BA

AC BC


CA DA

CC DC


OPERATING ACTION

2-Position:


02Mom. None Maint.

03Maint. None Mom.

3-Position:


05Mom. Maint. Mom.



Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

Manual Switches AML25 SeriesElectronic Control Paddle


LED DISPLAY

Covers with LED ‘‘window’’ ordered separately.

FEATURES1 Identical to AML23, except furnished

with one or two rectangular highefficiency LED’s which give flushdisplay area and wide angleindication.

1 Available with or without diodeprotection for LED’s.


1 5 thru 24 VDC devices have internalresistor to maintain current at nominal20 mA.

1 UL recognized, CSA certified.



Housing Operator/ LED Terminal Type/ Circuitry Operating LED Color LED ColorType Bezel Color Voltage Diode Protection Codes Code (LED A) (LED B)

AML25 F B B 2 Insert code Insert code R RRectangular Black/Black V* .110 × .020 letters numbers Red Red

1 LED (Solder or Q-C) as shown in from Y YC Circuitry Operating Yellow Yellow

AML25 G 5 V 3 Chart Action G GRectangular .025 × .025 on p. 29 Chart Green Green

2 LED’s D (Printed Ckt.,LED version

on p. 29 X X10 V or Push-On

availableNo LED No LED

only withE 8AA15 V .110 × .020BAw/DiodeCAF protectionDA24 V

circuitry

*See LED application information for devices without current-limiting resistor, page 59.

Example: AML25FBB2AA01RXRectangular paddle switch; illuminatedwith one red LED, this device has a blackpaddle and bezel, and .110 × .020 termi-nals; with one circuit ON and one circuitOFF in each extreme operator position(maintained).

† For further information on replacementLED’s, call the 800 number.

Coversorderedseparately 1 The ‘‘MICRO SWITCH’’ identification is

shown on this side of the switch housings.


Manual Switches AML26 SeriesElectronic Control Rocker

Honeywell 1 Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada 31

LED DISPLAY



FEATURES1 Identical to AML24, except furnished

with one or two rectangular highefficiency LED’s which give flushdisplay area and wide angleindication.

1 Available with or without diodeprotection for LED’s.


Electrical Data page 19Rockers page 52Lamps and LEDs page 58Accessories page 57Mounting Dimensions pages 59, 62

1 5 thru 24 VDC LED devices haveinternal resistor to maintain current atnominal 20 mA.


* *

*AML26 Series: 1 pole and2-pole only.


Housing LED Terminal Type/ Circuitry Operating LED Color LED ColorType Bezel Color Voltage Diode Protection Codes Action (LED A) (LED B)

AML26 F B B 2 Insert code Insert code R R1 LED Black V* .110 × .020 letters numbers Red Red

(Solder or as shown in from Y YAML26 G C Quick-Connect Circuitry Operating Yellow Yellow2 LED’s 5 V Chart Action G G

3 Chart Green GreenD .025 × .025

LED versionX X

10 V (Printed Ckt.,available

No LED No LEDor Push-On)

only withEAA15 V 8BA.110 × .020CAF w/DiodeDA24 V for LED

circuitryprotection

*See LED application information for devices without current-limiting resistor, page 58.

Example: AML26FBB2AA01RXRectangular rocker switch; illuminatedwith one LED, this device has a blackbezel, .110 × .020 terminals; with onecircuit ON and one circuit OFF in eachextreme operator position (maintained).

1 The ‘‘MICRO SWITCH’’ identification isshown on this side of the switch housings.

Rockerorderedseparately

Manuals


Manual Switches AML27 SeriesElectronic Control Keylock


NON-LIGHTED FEATURES1 Enable control of access to computer

peripherals, keyboards, point-of-saleterminals, and security systems whichare locked when unattended; andother locations where tampering mustbe discouraged.

1 2 or 3 positions, maintained (90°throw) and momentary action (60°throw).

1 5-bit key combinations

Electrical Data Page 19Mounting Dimensions Page 60, 63Accessories Pages 57-58

1 UL recognized, CSA certified.1 Static discharge protection (up to 20

kV when grounded).

AML27 ORDER GUIDEAML27 A B K 2 AA 21 BA

Circuitry Codes Operation ActionHousing Bezel Button Terminal (Each pole has (Key out in center position, Key

Type Color Color Type double-throw) except where noted) Combinations

AML27 A B K 2 Silver Contacts: (Two KeysBlack Black .110 × .020 AA Furnished)

Square (Solder or 1 polehousing Quick-Connect) AC BA BL

2 pole BB BMNon-Lighted 3 BC BN

.025 × .025 Gold Contacts: BD BP(Printed BA BE BQ

BF BRBG BSBH BTBJ BVBK BW

Circuit or 1 polePush-On) BC

2 pole

CCW Center CW

21None Maint. Maint.

22*None Maint. Maint.

23None Maint. Mom.


25Mom. Maint. Mom.

26**Maint. Maint. Maint.

27***Mom. Maint. Maint.

28***Maint. Maint. Maint.

29†Maint. Maint. Maint.

30†Maint. Maint. Mom.

31††Maint. Maint. Mom.

* Key out in both positions.** Key out in all three positions.

*** Key out in center and CW posi-tions.

† Key out in center andCCW positions.

†† Key out in CCW only.

REPLACEMENT KEYSOne key per listing.

KeyCom-

binationKey

CodeCatalogListing

BA 110 30PA101-AMLBB 109 30PA102-AMLBC 108 30PA103-AMLBD 107 30PA104-AMLBE 106 30PA105-AMLBF 105 30PA106-AMLBG 104 30PA107-AMLBH 103 30PA108-AMLBJ 102 30PA109-AMLBK 101 30PA110-AMLBL 111 30PA111-AMLBM 112 30PA112-AMLBN 113 30PA113-AMLBP 114 30PA114-AMLBQ 115 30PA115-AMLBR 116 30PA116-AMLBS 117 30PA117-AMLBT 118 30PA118-AMLBV 119 30PA119-AMLBW 120 30PA120-AML

Note: These keys fit the 5-bit keylocks inthe Order Guide. To order replacementkeys for our old style 4-bit key combina-tions, see below.

ORDER GUIDE FOR OLD STYLE AML27 REPLACEMENT KEYSOne key per listing.

KeyComb.

KeyCode

CatalogListing

AA 601 30PA3-AMLAB 602 30PA8-AMLAC 604 30PA9-AMLAD 607 30PA10-AMLAE 608 30PA11-AML

Specify different Key Combinations toacquire different keys, i.e.;

AML27ABK2AA21BB andAML27ABK2AA21BK have different keys.AML27ABK2AA21BB andAML27ABK3BC25BB have identical inter-changeable keys.Example: AML27ABK2AC28BBSquare housing; black bezel and button; .110× .020 terminals; 2-pole double-throw; silvercontacts; 3-position maintained and keycode ‘‘BB’’.

CIRCUITRY2-Position Switches:

Key TurnedNormal to Right

Position* (CW)

1 Pole

2 Pole

KeyComb.

KeyCode

CatalogListing

AF 610 30PA12-AMLAG 612 30PA13-AMLAH 614 30PA14-AMLAJ 615 30PA15-AMLAK 616 30PA16-AML

3-Position Switches (Available in 2-pole only.)

KeyTurnedto Left(CCW)

NormalPosition*

KeyTurned to

Right (CW)

2 Pole

* Circuit remains the same with key in or out.

28 and 29 op-erating actionsshould be usedwith Key Com-binations BA,BB, BG or BK.

Manuals


Manual Switches AML31/32 SeriesPower Duty Pushbutton


INCANDESCENT, NEON, OR NON-LIGHTED DISPLAY


FEATURES1 UL recognized, CSA certified.1 AML31 lamp circuit independent of

switch circuit.

AML31 Series: 2-pole.AML32 Series: 2-pole.

CONTACT ARRANGEMENT

2 poles (Form X)

AML31 ORDER GUIDEAML31 accepts one incandescent lamp which can be furnished installed or ordered separately.

AML31 E B A 4 AC

Housing Bezel Incandescent Terminal CircuitryType Color Lamp Type Type Codes

Standard Bezel: B A 4 2-Pole, Single-ThrowAML31E Rect. Non-Lighted Black No Lamp Installed .187 × .020 Normally-Open, Form X:AML31F Rect. 1 Lamp Ckt. (Solder or

Quick-ConnectAD AC

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

Alt.Action

Mom.ActionFull Guard Bezel:

AML31K Rect. Non-LightedAML31L Rect. 1 Lamp Ckt.


Example: AML31EBA4ACRectangular pushbutton switch housing,non-lighted; black bezel; .187 × .020 ter-

minals; momentary action; 2-pole, single-throw, normally open, Form X.

AML32 ORDER GUIDEAML32 has neon lamp wired to 125 or 250 VAC resistor.

AML32 F B C 7 AC

Housing Bezel Neon Lamp Terminal Type CircuitryType Color Voltage/Color Lamp Circuit Codes

Standard Bezel: B Red 4 2-Pole, Single-ThrowNormally-Open, Form X:AML32F Rect. 1 Neon Lamp Black B 125 VAC .187 × .020

C 250 VAC (Solder orQuick-Connect)

with isolatedlamp circuit

7.187 × .020with integrallamp circuit

ADAlt.

Action

ACMom.Action

Full Guard Bezel:AML32L Rect. 1 Neon Lamp Clear

K 125 VACL 250 VAC

GreenM 125 VACP 250 VAC

Example: AML32FBC7ACRectangular pushbutton switch housing;black bezel; 250 volt, red neon lamp; .187× .020 terminals with integral lamp cir-cuit; momentary action; 2-pole, single-throw, normally open, Form X.

Isolated neon circuit Integral neon circuit


SEI

SEI

AML51F BUTTONS

Manual Switches AML33/35 SeriesPower Duty Paddle



Colored housing covers ordered separately.

CONTACT ARRANGEMENT

1 or 2 poles: Form A

Electrical Data Page 20Paddle Covers Page 48Lamps Page 59Mounting Dimensions Page 61

FEATURES1 Toggle type paddle operators


1 2-position maintained action.1 AML33 lamp circuit independent of

switch circuit.1 UL recognized, CSA certified.

AML33 Series: 2-pole only.AML35 Series: 1-pole and

2-pole.AML33 ORDER GUIDEAML33 accepts one incandescent lamp which can be furnished installed or ordered separately.

AML33 E B A 4 AA 01

Housing Operator/Bezel Incandescent Terminal Circuitry OperatingType Color Lamp Type Type Codes Action

AML33 E B A 4 Silver Contacts:AA

1-Pole(One Form ASingle-throw,

Normally-Open)

Rectangular Black/Black No Lamp .187 × .020(Solder or

Quick-Connect)Non-Lighted

AML33 FRectangular1 Lamp Ckt.

Installed

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

AC2-Pole

(Two Form A)

01Maint. Maint.

ON OFF

*Lamps will be installed per each lamp circuit specified in the Housing Type.


AML35 F B B 4 AA 01

Housing Operator/Bezel Neon Lamp Terminal Type/ Circuitry OperatingType Color Voltage Lamp Circuit † Codes Action

AML35 FRectangular

1 Neon Lamp

BBlack/Black

RedB

125 VAC

C250 VAC

GreenM

125 VAC

P250 VAC

4.187 × .020(Solder or

Quick-Connect)With IsolatedLamp Circuit

7.187 × .020

With Integral LampCircuit (Available

with 2-Poledevices only

Silver Contacts:AA

(One Form ASingle-Throw)Available onlywith isolatedlamp circuit,term. type 4.

AC2-Pole

(Two Form A)

01Maint. Maint.

ON OFF

1 The ‘‘MICRO SWITCH’’ identification isshown on this side of the switch housing.

† Refer to next page for neon lamp circuitschematics.

Example: AML35FBB4AA01Rectangular paddle switch housing;black paddle and bezel; 125 VAC neonlamp; .187 × .020 terminals with isolated

lamp circuit; 1-Pole Form A Single-Throw;with circuit ON in one extreme positionand OFF in the other (maintained).

Manuals


Manual Switches AML34/36 SeriesPower Duty Rocker




FEATURES1 Same circuitry, and electrical rating as

power duty paddle switches.1 Neon lamp circuitry can be isolated or

integral on 2-pole switches; isolated-only on 1-pole switches (seeschematics).

1 UL recognized, CSA certified.1 AML34 lamp circuit independent of

switch circuit.

AML34 Series: 2-pole only.AML36 Series: 1-pole and

2-pole.AML34 ORDER GUIDEAML34 accepts one incandescent lamp which can be furnished installed or ordered separately.

AML34 E B A 4 AA 01

Housing Bezel Incandescent Terminal Circuitry OperatingType Color Lamp Type Type Codes Action

AML34 E B A 4 Silver Contacts:AA

1-Pole(One Form ASingle-Throw)

Rectangular Black No Lamp .187 × .020(Solder or

Quick-Connect)Non. Illum.

AML34 FRectangular1 Lamp Ckt.

Installed

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

AC2-Pole

(Two Form A)

01Maint. Maint.

ON OFF

*Lamps will be installed per each lamp circuit specified in the Housing Type.


AML36 F B B 4 AA 01

Housing Bezel Neon Lamp Terminal Type/ Circuitry OperatingType Color Voltage Lamp Circuit Codes Action

AML36 FRectangular

1 Neon Lamp

BBlack

RedB

125 VAC

C250 VAC

GreenM

125 VAC

P250 VAC

4.187 × .020(Solder or

Quick-Connect)With IsolatedLamp Circuit

7.187 × .020(Solder or

Quick-Connect)With Integral Lamp

Circuit

Silver Contacts:AA

(One Form ASingle-Throw)

Not available withterminal type 7

AC2-Pole

(Two Form A)

01Maint. Maint.

ON OFF

1 The ‘‘MICRO SWITCH’’ identification isshown on this side of the switch housing.

Example: AML36FBB4AA01Rectangular rocker switch housing; blackbezel; 125 VAC neon lamp; .187 × .020terminals with isolated lamp circuit; 1-Pole Form A single-throw; with circuit ONin one extreme position and OFF in theother.

Integral neon circuit Isolated neon circuit


Manual Switches AML41/42/43 SeriesLighted Indicators


To order lamps see page 59.

FEATURES1 Pushbutton style indicators match

display of lighted switches. Choice ofincandescent, LED, or neonillumination.

1 Lens style indicators use a specialcap-like button which covers thebezel to present a larger display area,without affecting family appearance.Up to 3-lamp split screen capability.Incandescent illumination.

AML41 AML41(Use AML51 push- (Use AML51-J/-K/-L

buttons only. lens buttons only.Page 43.) Page 43.)

AML41 INCANDESCENT DISPLAY INDICATORS ORDER GUIDEAML41 C B A 2

Housing Type Incand.Pushbutton Lens Bezel Lamp Terminal

Style: Style: Color Type Type

AML41 C AML41 J B A 2Square

1 lamp ckt.

AML41 DSquare

2 lamp ckts.

AML41 FRectangular1 lamp ckt.

AML41 GRectangular2 lamp ckts.

Rectangular1 lamp ckt.

AML41 KRectangular2 lamp ckts.

AML41 LRectangular3 lamp ckts.

Black No lampinstalled

B6 V Lamp*

C14 V Lamp*

E28 V Lamp*

.110 × .020(Solder or Quick-

Connect)

3.025 × .025

(PrintedCircuit

or Push-On)


Examples:AML41CBA2Square (pushbutton style) indicatorhousing with one lamp circuit; black be-zel; .110 × .020 termination.

AML41JBA2Rectangular (lens style) indicator hous-ing with one lamp circuit; black bezel; .110× .020 termination.

AML42C AML42S(Use AML52-C/-Apushbuttons only.

Page 44.)

AML43 neon display indicators are iden-tical to AML32 power switches, exceptbutton is furnished assembled (locked indepressed position) and there is no provi-sion for switching. Button is nonremov-able. Other button colors are available.Example:AML43FBB40RRectangular device with black bezel; 125volt red neon lamp .187 × .020 termina-tion.NOTE: Add L to neon indicator cataloglisting if legend is desired and submit Leg-end Sheet FO-63504.

AML42 LED DISPLAY INDICATORS ORDER GUIDELEDs are not replaceable.AML42 S B C 2

Housing Bezel LED Color/ Terminal Type/Type Color Voltage Diode Protection

AML42 C B Red 2 8Square Black B V* .110 × .020 .110 × .0201 LED C 5 V (Solder or Q.C.) w/diode to

D 10 V protect LEDAML42 S E 15 V 3Compact F 24 V .025 × .025 9

1 LED Yellow Green (Printed Circuit .025 × .025H V* R V* or Push-On) w/diode toJ 5 V S 5 V protect LEDK 10 V T 10 VL 15 V W 15 VM 24 V X 24 V

* See LED application data, page 59, for thesedevices without current-limiting resistor.Example: AML42SBC2

Compact indicator with black bezel; 5 voltred LED; .110 × .020 termination.

AML43 NEON DISPLAY INDICATORS ORDER GUIDEAML43 F B B 4 OR

Housing Bezel Neon Lamp Terminal ButtonType** Color Color/Voltage Type Color

AML43FRect.

BBlack

RedB 125 VC 250 V

ClearK 125 VL 250 V

GreenM 125 VP 250 V

4.187 × .020

(solderor Q.C.)

OR RedOY YellowOG GreenOW WhiteOK Black

Manuals


Maual Switches AML45/59 SeriesSolid State LED Annunciators


AML59 CAP ASSEMBLIESThe cap assembly consists of: black cap,color filter(s), and optional film legend;furnished unassembled. It snaps ontohousing, flush with the housing bezel.

Filters, assembled with their matte finishfacing the LED’s, efficiently diffuse the illu-mination. They are color-tinted to comple-ment the red, yellow, and green LED’s.

NOTE: Cap assembly should not be sub-jected to the temperature and chemicalatmosphere associated with wave solder-ing. These parts should be installed aftersoldering and cleanup.

Catalog listings for AML59 cap assem-blies are derived from the ordering guidebelow. The ordering guide for AML45 LEDhousings is on page 39.

CUSTOM LEGENDSA 2:1 drawing in black ink is required forsatisfactory reproduction of custom filmlegends. As an alternative, you may sub-mit an office copy of a page from a typo-graphic supplier catalog such as Char-tpak, Letraset, and Zipatone. MICROSWITCH can also furnish graphic leg-ends from the ‘‘Henry Dreyfus SymbolSource Book.’’ (Custom legends requirea one-time start-up charge.)

1 Viewing area inside cap:X J 1.04 min.; Y J .272 min.

2 Customers ordering film legends fromcommercial photographic or typeset-ting sources should specify that thefilm be precision cut, per the followingdimensions, to insure proper retentionand alignment on the face of the an-nunciator: A J .007 max.; B J 1.1 ±.010; C J .300 ± .003.

STANDARD LEGENDSAML59 Legend Sheet (see page 42) pro-vides ordering information for negativeand positive standard film legends in thetype style (14-point Helvetica condensedbold) shown below. Use separate legendsheet for each AML59 catalog listing andattach it (them) to your purchase order.

AML59 ORDER GUIDEAML59-R K 10 R

Filter ColorCap Cap LegendStyle Color Type Full Screen Split Screen

AML59-RFull Screen

AML59-SSplit Screen

KBlack

10No

Legend

20Negative

FilmLegend

21Positive

FilmLegend

RRed

YYellow

GGreen

RRed

YYellow

GGreen

RRed

YYellow

GGreen

Examples:AML59-RK10RFull screen style, black cap, no legend,and red filter.

AML59-SK20RYSplit screen style, black cap, negative filmlegend, red and yellow color filters.

Manuals


Manual Switches AML59 SeriesLegend Sheet



Manual Switches AML51 SeriesButtons/Lens for Switches and Indicators


AML51 PUSHBUTTON ORDER GUIDEFor Incandescent or non-lighted display switches and pushbutton style indicators.

AML51-C 10 R —

For AML11, 21, 31 switches and AML41 indicators: Display Full Color or 2ndPushbutton Style Legend/Type 1st Color Split Color Split

AML51-C AML51-F AML51-G

AML51-A AML51-H AML51-Nu

AML51-B* AML51-E* AML51-M*

AML51-R*

For AML41D indicators only:

AML51-D

RRed

YYellow

GGreen

BBlueW

WhiteK***

BlackL***

GrayA**

Amber

RRed

YYellow

GGreen

BBlueW

WhiteK***

BlackL***

GrayA**

Amber

Transmitted Color10 No legend20 With legend

on cap.

Transmitted Color(Clear cap and

color insert)11 No legend21 With legend

on insert

Dead Front(Smoky gray capand color insert)30 No legend40 With legend

on insert

Projected Color(White cap and


on cap

*Available with transmitted color (10 or 20) only.

Example: AML51-C10RSquare full color button; with transmitted color,no legend: red.**Available with transmitted color and dead front only.***Black and gray not recommended for lighted display.uAML51-N buttons not available with Display/Legend Types10 and 20.Note: Dimensions include the .060 in bezel.

AML51 LENS ORDER GUIDEFor incandescent display AML41J, K, and L lens style indicators only.

AML51-J 10 R

Full ColorDisplay/Legend or 1st 2nd 3rd

Lens style Type Color Split Color Split Color Split

AML51-J

AML51-K

AML51-L

Transmitted Color R R R10 No legend Red Red Red20 With legend

Y Y YTransmitted Color Yellow Yellow Yellow

(Clear cap andcolor insert) G G G

11 No legend Green Green Green21 With legend

B B BDead Front Blue Blue Blue

(Smoky gray capand color insert) W W W30 No legend White White White40 With legend

A** A** A**Projected Color Amber Amber Amber(White cap and


**Not available with projected color.

AML51 lens buttons provide added dis-play area by snapping onto and coveringthe bezel of AML41J, K, and L indicators.They do not fit other indicators or switch-es.

Example: AML51-J10RRectangular lens type button; full color;transmitted color, no lenged; red.

HOW TO ORDER BUTTON LEGENDSWhen specifying legended buttons, sub-mit a legend order sheet to cover eachlisting. To insure proper legend orienta-tion, AML housings (when viewed fromthe panel front) should have the ‘‘MICROSWITCH’’ identification facing UP onsquare devices and UP or to the LEFT onrectangular.

Button legend order sheets are shown onthe following pages. Reproduce them onyour office copier.Legend Sheet Form No.AML51 Pushbuttons FO-63394AML51 Lens buttons FO-63395AML52 Pushbuttons FO-63504AML53 Paddle switch covers FO-63567AML55 Paddle switch covers FO-63565AML54 Rockers FO-63566AML56 Rockers FO-63564

Manuals


Manual Switches AML51/52 SeriesButtons for Switches and Indicators


AML52 BUTTON ORDER GUIDEFor AML12, AML22 (w/o light pipe), AML32, AML42 LED display.

AML52-N 10 R

Button Display/Legend ButtonType Type Color

For LED DevicesAML52-C

AML52-A*

For AML32 Neon DevicesAML52-N

Transmitted Color

10No Legend

20With Legend

RRed

YYellow

GGreen

BBlue

WWhite

KBlack

AAmber

LGray

Examples:AML52-N10RRectangular full screen; for use on neonpower switch with transmitted color, nolegend; red button.

AML52-C10KSquare full screen; for use with LED de-vice; transmitted color, no legend; blackbutton.


Manual Switches AML52 SeriesPushbutton Legend Sheet


Manuals


Manual Switches AML51 SeriesPushbutton Legend Sheet



Manual Switches AML51 SeriesLens Legend Sheet


Manuals


Manual Switches AML53/55 SeriesCovers for Paddle Switches


Colored covers simply snap into the topof paddle switch housings.

COLOR DISPLAY OPTIONSTransmitted color — Color is displayedwhether lamp is On or Off. Choice of1-piece covers (types 10 or 20) or coverswith clear cap and colored translucent in-sert (types 11 or 12).

Dead front hidden color/hidden legend —Cover appears black with lamp Off. Leg-end and color appear when illuminated(types 30 or 40).

Projected color — Translucent white cov-er with transparent colored insert (types50 or 60). White cover appears coloredwhen illuminated.

AML53 PADDLE SWITCH COVER ORDER GUIDEFor AML13, AML23, and AML33 incandescent or non-lighted display.

AML53-T 10 R G

Cover Color

Paddle 1⁄2 cover, Other side ofSwitch Display/Legend or one side of two-piece cover

Cover Type Type two-piece cover (see note)

AML53-E1⁄2 Cover

AML53-TTwo-Piece Cover

Transmitted Color RRed

YYellow

GGreen

BBlueW

WhiteK*

BlackL*

GrayA**

Amber

RRed

YYellow

GGreen

BBlueW

WhiteK*

BlackL*

GrayA**

Amber

10 No legend20 With legend on

capTransmitted Color

(Clear cap andcolor insert)


insertDead Front

(Smoky gray capand color insert)30 No legend40 With legend on

insertProjected Color(White cap and

color insert)50 No legend60 With legend on

cap

Note: Only one color code letter is neces-sary when ordering 1⁄2 covers.

Example: AML53-T10RGTwo-piece cover; with transmitted color,no legend; red and green.

*Not for lighted display.**Not available with projected color.

AML55 PADDLE SWITCH COVER ORDER GUIDEFor AML35 neon display.

AML55-N 10 R Y

Paddle Switch Display/Legend Lens CoverCover Type Type Color Color

AML55-NFull Neon Cover,with colored lens

Transmitted Color10

No Legend

20With Legend

TClear

RRed

RRed

YYellow

GGreen

BBlueW

WhiteK

BlackL

GrayA

Amber

AML55-N covers have a colored lenticularlens window which extends over the neonlamp.

Example: AML55-N10RYFull neon paddle switch cover; with trans-mitted color, no legend; red lens and yel-low cover.


Manual Switches AML55 SeriesCovers for Paddle Switches


HOW TO ORDER LEGENDSFOR PADDLE SWITCH COVERSWhen specifying legended paddle switchcovers, submit a legend order sheet tocover each catalog listing. These formsidentify the maximum number of lines perarea and the maximum characters perline, based on the type size you request.

To insure proper legend orientation, pad-dle switch housings (when viewed fromthe panel front) should have the ‘‘MICROSWITCH’’ identification facing UP or tothe LEFT.

Legend order sheets for covers areshown on the following pages. Repro-duce them on your office copier or re-quest a pad of them from the 800 num-ber.:Legend Sheet Form No.AML53 Covers FO-63567AML55 Covers FO-63565

AML55 PADDLE SWITCH COVER ORDER GUIDEFor AML15 and AML25 LED display. See notes below

AML55-T 10 Y R

Cover Color – See notes below

Paddle 1/2-cover,Switch Display/Legend or LED side of Other side of

Cover Type Type two-piece covers* two piece covers

AML55-E

1/2 Cover(For one LED)*

AML55-T

Two-Piece Cover(For one LED)

AML55-H

Two-Piece Cover(For two LED’s)

Transmitted Color10 No Legend20 With Legend

R RRed Red

YYellow

GGreen

BBlueW

WhiteK

BlackL

Gray

YYellow

GGreen

BBlueW

WhiteK

BlackL

Gray

AML55-E, -T, and -H covers have an openwindow which allows LED’s to be flushwith the cover surface.

* Notes:1 Only one color code letter is necessary

for AML55-E 1/2 covers.2 To order a 1/2-cover without the LED

‘‘window,’’ specify an AML53-E listingfrom the previous page.

Example: AML55-T10YRTwo-piece cover; with LED window in oneside, transmitted color, no legend; yellow(LED side) and red (non-LED side).

Manuals


Manual Switches AML53 SeriesPaddle Operator Legend Sheet



Manual Switches AML55 SeriesPaddle Legend Sheet


Manuals


Manual Switches AML54/56 SeriesRocker Switch Operators


COLOR DISPLAY OPTIONS

Rocker operators are assembled to theswitches by simply snapping them intorecesses in the switch operator sockets.

Transmitted color — Color is displayedwhether lamp is On or Off. Choice of 1-piece rockers (types 10 or 20) or rockerswith clear cap and colored translucent in-sert (types 11 or 12).

Dead front hidden color/hidden legend —Rocker appears black with lamp Off. Leg-end and color appear when illuminated(types 30 or 40).

Projected color — Translucent whiterocker with transparent colored insert(types 50 or 60). White rocker appearscolored when illuminated.

AML54 ROCKER OPERATOR ORDER GUIDEFor AML14, AML24, AML34 incandescent or non-lighted display.

AML54-F 10 R

Rocker Color – See Note Below

RockerOperator Type

Display/LegendType

Full rocker,1/2 rocker,

or one side oftwo-piece rockers

Other sideof two-piece

rockersAML54-F

Full Rocker

AML54-E

1/2 Rocker

AML54-T

Two-Piece Rocker

Transmitted Color10 No legend20 With legend on

cap

Transmitted Color(Clear cap andcolor insert) †


insert

Dead Front †(Smoky gray capand color insert)


insert

Projected Color †(White cap and

color insert)50 No legend60 With legend on

cap

RRed

YYellow

GGreen

BBlueW

WhiteK*

BlackL*

GrayA**

Amber

RRed

YYellow

GGreen

BBlueW

WhiteK*

BlackL*

GrayA**

Amber

*Not for lighted display.**Not available with projected color or dead front.†Not available for use with AML34 power switches.

Example: AML54-F10RFull rocker; with transmitted color, no leg-end; red.

NOTE: AML54-F10 and AML54-F20 areone-piece, one-color full rockers. Thusonly one color code letter is necessarywhen ordering. Include a two lettercode for all other AML54-E (and AML54-T) catalog listings.

AML56 ROCKER OPERATOR ORDER GUIDEFor AML36 neon display.

AML56-N 10 R Y

Rocker Display/Legend Lens RockerOperator Type Type Color Color

AML56-N Transmitted Color T R10 Clear Red

No Legend R YRed Yellow

20 Y GWith Legend Yellow Green

BFull Rocker

withColored Lens

BlueW

WhiteK

Black

AML56-N rockers have a colored lenticu-lar lens window which extends over theneon lamp.

Example: AML56-N10RYFull rocker; with transmitted color, no leg-end; yellow rocker and red lens.


Manual Switches AML56 SeriesRocker Switch Operators


HOW TO ORDER ROCKER LEGENDSWhen specifying legended rockers, sub-mit a legend order sheet to cover eachcatalog listing. These forms identify themaximum number of lines per area andthe maximum characters per line, basedon the type size you request. To insureproper legend orientation, rocker switchhousings (when viewed from the panelfront) should have the ‘‘MICRO SWITCH’’identification facing UP or to the LEFT.

Rocker legend order sheets are shown onthe following pages. Reproduce them onyour office copier.Legend Sheet Form No.AML54 Rockers FO-63566AML56 Rockers FO-63564

AML56 ORDER GUIDEFor AML16 and AML26 LED display.

AML56-T 10 R B

Rocker Color – See Notes Below

1/2-rockerRocker Display/Legend or LED side of Other side of

Operator Type Type two-piece rockers two piece rockers

AML56-E

1/2-Rocker*(For one LED)

AML56-T

Two-Piece Rocker(For one LED)

AML56-H

Two-Piece Rocker(For two LED’s)

Transmitted Color10 No Legend20 With Legend

R RRed Red

YYellow

GGreen

BBlueW

WhiteK

BlackL

Gray

YYellow

GGreen

BBlueW

WhiteK

BlackL

Gray

Example: AML56-T10RBTwo-piece rocker; with LED window inone side, transmitted color, no legend;red (LED side) and blue (non-LED side).

* Notes:1 Only one color code letter is necessary

for AML56-E 1/2-rockers. AML56-E, -T,and -H rockers have an open windowwhich allows LEDs to be flush with therocker surface.

2 To order a 1/2-rocker without the LED‘‘window,’’ specify an AML54-E listingfrom the previous page.

Manuals


Manual Switches AML54 SeriesRocker Legend Sheet



Manual Switches AML56 SeriesRocker Legend Sheet


Manuals


Manual Switches AML61 SeriesMounting Hardware


FOR STRIP AND MATRIX MOUNT ASSEMBLIES FEATURES1 Enables subpanel mounting of

devices in factory assembled metalcans which are welded together instrips or matrices. Assures accuratealignment and enables pre-wiring.

1 L-shaped mounting brackets conformto various panel thicknesses, usingspacers.

1 Simplifies panel fabrication, sinceonly one large cutout is required.

1 Facilitates printed circuit boardmounting. Operating force istransmitted to mounting hardware,rather than P.C. board.

1 For custom matrices contact theMICRO SWITCH Application Center.

1 Mounting dimensions page 65.AML61 MOUNTING HARDWARE ORDER GUIDE(For standard strip mount assemblies)

AML61 B A 5 A

Mounting Bracket Number Mounting BracketType Orientation of Cans Location

Square cans:

AML61 B(Plain finish)

AML61 J(Black finish)

A

E

123456789*

10*11*12*

*A, C, D & Eorientation only.Rect. cans: B

AML61 E(Plain finish)

AML61 K C D(Black finish)

A G

B K

C L

D P

E T

F

UNOBRACKETS

1To order one rectangular can with mounting brackets on short sides, specify AML61EB1 or AML61KB1 .

Example: AML61EC5AFive rectangular cans, plain finish (un-painted), long sides abutting; type Amounting brackets on long sides, locatedflush with switch or indicator bezel. (TypeT bracket brings top of annunciator bezelflush with top of .160 in./4,1 mm panel.)

This strip has Type F brackets for P.C.board mounting.

NON-STANDARD ASSEMBLIESUse the order form on the following pageto specify non-standard AML61 strip ormatrix assemblies. You may reproduce iton your office copier, or order pads fromthe 800 number. Request FO-63558.


Manual Switches AML71/75 SeriesBarriers/Panel Seal Accessories


AML71 BARRIERS

Drawing shows two switches, slot mount-ed. From left to right: one center barrier, asecond switch, plus another end barrierto complete the arrangement.

When mounting an individual unit, an endbarrier is attached to each side of thehousing. The center barrier is used in aslot mount array.

FEATURES1 Barriers separate individually

mounted switches and indicators —help prevent inadvertent actuation oftwo pushbutton switches with a singlepush.

1 Front of panel mounting simplifiesinstallation.

AML71 BARRIER ORDER GUIDE (See notes)Barriers shown in order guide are black.

Barrier Length Type Catalog Listing

Short Center AML71SCB(For use with square devices and short side

of rectangular devices.) End AML71SEB

Long Center AML71LCB(For use with long side of rectangular

devices.) End AML71LEB

Notes:Not for use with AML61 mounting hardware or any full guard bezel products.Not for use with AML41J, K, or L lens type indicators; or AML45 annunciators.

AML75 PANEL SEAL FEATURES1 AML75 panel seals fit pushbutton

switches and indicators.1 Provides protection from

contamination from accidentalbeverage spills, dust, and dirt.

1 Easy to install, without tools1 No effect on display color, light

intensity, or legend quality.1 Replace seal or change lamps without

removing switch from panel.1 For .19-inch standard height square or

rectangular pushbuttons.1 Mounting dimensions page 66.

The design complements AML’s func-tional appearance, creating a pleasingframed effect around the button. It con-sists of a matte black plastic base whichpress-fits between the panel and switchbezel, and a transparent flexible sealwhich snaps into the base. PK 8521, ship-ped with each order, provides installationinstructions.

Button colors and legends can be viewedwithout distortion whether lighted or un-lighted. Seals can be conveniently re-placed or removed for relamping, withoutremoving the switch from panel.

Operating temperature range is 32° to131°F (0° to 55°C).

AML75 PANEL SEAL ORDER GUIDE

For Use With:

Square .19N Rectangular .19NDescription high pushbuttons high pushbuttons Rockers

Base & Seal AML75ABC AML75BBC AML75RBC

Base Only AML75ABN AML75BBN —

Seal Only AML75ANC AML75BNC —

Notes:Multiple units should not be mounted in asingle slot, since this would create an un-sealed space between each unit. AML75seals are not for use with barriers, full

guard bezels, AML61 mounting hard-ware, AML45 annunciators, or AML41J, K,or L lens type indicators.

MATERIALBase: PolypropyleneCap: Polyvinyl Chloride

Manuals


Manual Switches AML76/78 SeriesSwitch Guard/Panel Plugs, Dummy Housings


FEATURES1 Button cannot be operated when

switch guard cover is closed,preventing accidental operation

1 Wire lock-down feature furtherprevents unintentional actuation of theswitch.

1 Lamps can be replaced with theswitch guard attached, withoutspecial tools, saving maintenancetime

1 Can be used with alternate ormomentary action square orrectangular .19 inch standard heightAML buttons

1 Shock resistant construction, for long,maintenance-free life

AML76 switch guard protects squareand rectangular .19-inch standardheight pushbuttons from inadvertentactuation. It is for use with standard be-zel type switches only.

See page 66 for mounting dimensions.

The switch guard cover is clear, polycar-bonate thermoplastic through which thebutton is easily visible. The word ‘‘lift’’ ismolded onto the top front edge of theguard. The bracket is bright-finishedstainless steel.

The switch guard may be assembled tothe AML pushbutton before the switch isinstalled in a panel. Or, the guard can beassembled to a pushbutton alreadymounted in a panel, providing the wiringis sufficiently slack to raise the switch be-zel above the panel; and if there is suffi-cient clearance with adjacent units. PK8522 contains installation instructionsand is shipped with each order.

AML switch guards may be mounted inhorizontal or vertical matrices. A wirelock-down feature, using .020-inch diam-eter locking wire, may be used as an addi-tional protection.

SWITCH GUARD ORDER GUIDE

Guard Type* Catalog Listing

Square AML76C10T01P

Rectangular AML76F10T01P* The word ‘‘LIFT’’ is molded into the cover. If other

languages are desired contact the 800 number.Note: Switch guard is not designed for use withAML61 mounting hardware, AML71 barriers, or fullguard bezel switches.

CONNECTOR BLOCK

AML79CC

This connector block can be used withsquare 1 and 2 pole AML21 switches with.110 × .020 terminals to enable plug-inwiring.

AML78 PANEL PLUGS

Plastic panel plugs (shown above) en-able the user to provide for future needsby punching extra panel holes. Finishedin matte black, they are the same heightas the standard AML bezel when snap-ped in place from the panel front.

Panel plugs are only for use in individualholes or with AML61 mounting hardwarein multi-station strips. (Use dummy hous-ings in strip cutouts without AML61mounting hardware.)

PANEL PLUG ORDER GUIDE

Plug Type Catalog Listing

Square AML78CB

Rectangular AML78FB

AML78 DUMMY HOUSINGSDummy housings can be used to providefor expansion needs in strip cutouts with-out AML61 mounting hardware. Theyhave mounting clips, but there is no provi-sion for switching or illumination.

DUMMY HOUSING ORDER GUIDE

CatalogDummy Housing Type* Listing

Square AML78C100(Pushbutton style)

Rectangular AML78F100(Pushbutton style)

Rectangular AML78J100(Lens indicator style)

* Order AML51 Buttons/lenses for use with dummyhousings.


Manual Switches AML91 SeriesLamps, Soldering Recommendations, Receptacles


AML91 LAMP ORDER GUIDE

Lamp Industry CatalogType Lamp No. Voltage Listing

86 6.3 AML91LA86IncandescentT-1-3/4 73 14.0 AML91LA73

wedge base 85 28.0 AML91LA85

LAMP DATAThe following data was compiled frommanufacturer’s specifications, for refer-ence only.

INCANDESCENT LAMPSIndustry Life

Lamp No. Volts Amps Watts MSCP A/C Volts

86 6.3 .200 1.25 .49 20,000 hours5.5 .185 1.12 .246 106,200 hours5.0 .177 .89 .185 290,000 hours

73 14.0 .080 1.12 .30 15,000 hours12.0 .077 1.00 .23 36,450 hours

85 28.0 .04 1.12 .30 7,000 hours24.0 .037 .89 .177 41,860 hours

Neon Lamps25,000 hours (half life)

INTEGRAL LEDs

Peak Inverse Voltagew/o Diode w/Diode

LEDs FurnishedPermanentlyInstalled in

These Products Vf If VPD Protection Protection

AML12, 15, 16, 2.4 V 20 mA .7 V 5 V 34 V22, 25, 26, 42

AML45 2.4 V 20 mA .7 V 4 V 33 V

100,000 hours (half life).

AML92 SERIES LEDs

For use with these AML switches and in-dicators equipped with lamp sockets:Pushbutton switches: AML11 (SquareOnly)*, AML21 (rectangular and square),and AML31.Paddle switches: AML31/23/33Rocker switches: AML14/24/34Indicators: AML41* Rectangular solid state with one or two lamp circuitscannot be used with LED catalog listings ending in‘‘L’’.

OPERATING CHARACTERISTICSVF Fwd. Voltage (typ.)

Type Yellow Green Red WhiteIF Fwd.Current

VR Rev.Voltage

Quad Chip 8.6 8.6 7.8 — 15 mA 16 V

Six Chip 4 V 4 V 4 V 4 V 50 mA 5.6 V

TEMPERATURE RANGE(Quad Chip or Six Chip)Operating: –20 to 60°C (–4 to 140°F)Storage: –30 to 100°C (–22 to 212°F)

AML92 ORDER GUIDE

LED Color Quad Chip Six Chip

Red AML92ERY AML92ERL

Green AML92EGY AML92EGL

Yellow AML92EYY AML92EYL

White — AML92EWL** For use with white or yellow buttons.

SOLDERING RECOMMENDATIONSAll terminals are solder plated. Proper sol-dering and cleaning procedures must befollowed to maintain the reliability of AMLproducts during installation. An instruc-tion sheet which outlines these proce-dures is included with AML shipments.You may also obtain a copy from yourMICRO SWITCH Sales Office. RequestPK 8518.

As a general guide, the following informa-tion may be used:

Use a 280°C (538°F) solder iron tip, up to6 seconds duration, with a 60-40 rosincore solder. This allows the terminal toheat quickly on the exterior of the housingonly, and greatly reduces the chance offlux migrating inside the housing.

LED APPLICATION INFORMATIONFor those devices without internal currentlimiting resistors, suitable external controlof the LED current must be provided. It isrecommended that a minimum of 5 VDCopen circuit voltage with an appropriateseries resistance be used to drive LED de-vices. This minimizes the effect of temper-ature (current variation) on forward volt-age of the LED.

Resistor values can be determined bysupply voltage or current for LED:

RS JE – Vf

If

WHERE: RS J Series ResistanceE J Supply VoltageVf J Forward Voltage of LEDIf J Circuit Current

If a diode is added in series for reverse po-larity protection then:

RS JE – Vf – VPD

If

WHERE: VPD Forward Voltage ofProtection Diode

Manuals


Manual Switches MML SeriesMiniature Manual Line


FEATURES1 Breadth of line offers complete

selection of pushbuttons (includingencoding options), rockers, paddlesand indicators to accommodatedifferent functions and promoteoperator efficiency.

1 Printed wiring board (PWB) or panelmounted switches, plus multi-unitstrip mounting, and single leveltermination for cost-effectiveinstallation.

1 Tactile feedback imparts a definite feelof switching action.

1 Coordinated appearance enhancespanel harmony.

1 Illumination by long-life LED’s andincandescent lamps—for lighteddisplay versatility.

1 Solid state, electronic control andpower duty switching—for electricalversatility.

1 Temperature range: –18° to 65°C (0°to 149°F).

DESIGN FREEDOMRocker and paddle switches have beenadded to the MICRO SWITCH MML Minia-ture Manual Line. They complement AMLpushbuttons and indicators, providingyou flexibility and design freedom to an-swer all your miniature manual control re-quirements. You can choose the actuatoroption that matches the switch functionand natural habit pattern reflex of the op-erator. You no longer need to compro-mise quality, appearance, or human fac-tors considerations, because of sizeconstraints.

The MML pushbutton and indicator offer-ing has also been expanded to includenew square forms which are smallenough to fit in the tightest places.

MOUNTING FLEXIBILITYPrinted wiring board (PWB) mountedswitches can be arranged in individualpanel openings, multi-unit strips or ma-trices, in a common panel cutout. Option-al support brackets provide added rigidityfor stand-alone PWB mounted devices.Units with bezels and mounting clips canbe snap-in mounted from the panel front.

Single level PWB or solder/quick-connecttermination throughout makes wiring fas-ter, easier, and more economical. Hous-ings are designed to accommodatewashing, before and after wave solder-ing, to help prevent contamination duringprinted wiring board installation.

LIGHTED DISPLAY OPTIONSPushbuttons and indicators can be full-face illuminated by LED’s or incandes-cent lamps for high visibility of colors andlegends. Inherently rugged, long-lifeLED’s reduce service and maintenancecosts. Also, their low drive and inrush cur-rent (30 mA or less) reduces costs of drivecircuitry.

Rockers can be furnished with coloredlenses for illumination by LED’s or incan-descent lamps.

CONTROL VERSATILITYSolid state pushbutton switches with Halleffect integrated circuits interface directlywith microprocessors and other logic lev-el devices. Time-proven for billions of cy-cles, Hall effect IC’s provide the ultimatein reliability.

Electronic control pushbutton, rocker,and paddle switches, with gold or silvercontacts, handle up to 1 amp; power dutyswitches, up to 6 amps.

Manuals




MML ENHANCES PANEL HARMONYThe attractive clean line design of the totalMML offering is coordinated to work inharmony and enhance the visual qualitiesof your product. MML will help make agood first impression with your custom-ers by blending with other panel compo-nents. And also work hard over the longrun to maintain operator satisfaction.

HOW TO ORDERTo specify MML catalog listings, refer tothe order guides. They are based on amodular cataloging system which givesyou the flexibility to choose the combina-tion of feature options that best answersthe requirements of your application.

ORDER GUIDES

Solid State SwitchesMML11 Pushbutton Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Electronic Control SwitchesMML21 Pushbutton Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72MML23 Paddle Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74MML24 Rocker Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Power Duty SwitchesMML31 Pushbutton Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

IndicatorsMML41 Indicators/LED or Incandescent Display . . . . . . . . . . . . . . . . . . . . . . . . . . 78MML46 Indicators/LED or Incandescent Display . . . . . . . . . . . . . . . . . . . . . . . . . . 78MML44 Indicators/LED Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Lenses and ButtonsMML51 Lenses/Incandescent or Non-lighted Display. . . . . . . . . . . . . . . . . . . . . . 82MML52 Lenses/LED or Neon Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Mounting HardwareMML61 Strip Mounting Frames . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85MML72/73 Bezels and Mounting Clips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86MML74 PWB Mount Support Brackets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

LED’s, Lamps, ReceptaclesMML92/93 LED’s/Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87/90MML91/93 Incandescent Lamps/Receptacles . . . . . . . . . . . . . . . . . . . . . . . . . 89/90

MML medical application. Intranvaneous fluid flow controller auto-matically dispenses fluids for medications, therapy, and nutrition.

MML communications application. Mobile radio control keeps busi-nesses in touch with employees on the road.




MML CHARACTERISTICSMML 10 Series MML 20 Series MML 30 Series MML 40 Series

Mechanical Lifetime* N/APushbuttons–Momentary 1,000,000 250,000 100,000 ---Pushbuttons–Alternate 100,000 100,000 100,000 ---Rockers 100,000 250,000 100,000 ---Paddles 100,000 250,000 100,000 ---

Electrical Lifetime*** N/APushbuttons–Momentary 1,000,000 25,000 25,000 ---Pushbuttons–Alternate 100,000 25,000 25,000 ---Rockers 100,000 25,000 25,000 ---Paddles 100,000 25,000 25,000 ---

Agency RatingsUL File E53576 File E12252 File E12252 File E58932CSA File L R4442 File LR4442 File LR4442 File LR4442

*95% Survival**Lifetime at Full Rated Load

MML ELECTRICAL DATAMML10 SERIESElectrical Characteristics Integrated Circuit Function 5-24 VDC Sinking

Supply Current (Max.) 7 mA (Released)8 mA (Operated no load)

Output Voltage (Operated) 0.3 Volt (Sinking 10 mA)

Output Leakage Current 5.0 µAMax. (Released)

Switching Time Max.Rise 10% to 90% 1.5 µ sec (Sinking 10 mA)Fall 90% to 10% 0.5 µ sec (Sinking 10 mA)

Rated Output Current 10 mA Sinking

Absolute MaximumRatings

Supply Voltage (Vs) –28 to +28 VDC

Voltage Externally Applied –0.5 Volt min.to Output +28 Volts max.

(Off condition)

Loads to Output 20 mA (Sinking)

Storage Temperature –40° to +85°C(–40° to +185°F)

Operating Temperature –18° to +65°C(0° to +149°F)and supply voltage of 4.5to 5.5 VDC

As with all solid state components, performance can be expected to deteriorate as rating limits are approached;however, they will not be damaged unless the limits are exceeded.

MML20 SERIESElectrical Rating(silver contacts)

Standard buttonsUp to 1 amp, 125 VAC

1 piece plunger/lens cap buttons:Black—Up to 1 amp, 125 VACAll others—Up to 0.5 amp, 125 VAC

Electrical RatingGold Contacts

All button styles:Up to 0.25 amp, 30 VDCUL rating—0.10 amp, 30 VDC

One pole Form C

MML30 SERIESMML31:Electrical RatingSilver Contacts

6A @ 125 VAC, 250 VAC; 2A @ 30 VDC;1A @ 125 VDC ‘‘L’’; 1/10 hp @ 125 VAC

Contact Arrangement 1 or 2 poles Form X

Manuals




MOUNTING DIMENSIONS (For reference only)

PANEL CUTOUTS FOR PUSHBUTTON SWITCHES AND INDICATORS/RECTANGULAR TYPE

INDIVIDUAL SNAP-IN PANEL MOUNT

1,27 — 2,39

.050 — .094

Panel Thickness

PANEL PUNCH FOR MML SERIESA panel punch is manufactured by Greenlee-Textron Tool Co., Rockford, IL(815-926-3011).

INDIVIDUAL PRINTED WIRING BOARD (PWB) MOUNT

Pushbutton Plunger Thru Panel Housing Thru Panel Indicator Lens Thru Panel

MULTI-UNIT PRINTED WIRING BOARD (PWB) MOUNT

Horizontal Mount

Establish tooling holes on X coordinate and use these holes to establishrelationship between PWB and Panel

Terminals x0,20 0,76

.008 .030

Recommended hole size in PWB 1,17

.046

Switches must be fixtured to insure proper panel cutout alignment

N = Number of switches

X = N-1 x +15,24 15,11.600 .595

Y =10,16

.400

Example: N = 5 Switches

X = 5-1 x +15,24 15,11.600 .595

X = 76,07

2.995

Matrix Mount Vertical Mount

N = Number of SwitchesNX = Number of RowsNY = Number of Columns

N = NX–1 x +15,24 15,11.600 .595

Y = NY x 10,16

.400

N = Number of Switches

Y = N x 10,16.400

X = 15,11.595

Example: N = 4Y = 4 x 10,16

.400

Y = 40,641,600

Manuals





PANEL CUTOUTS FOR PUSHBUTTON SWITCHES AND INDICATORS/SQUARE TYPE

Individual Snap-inPanel Mount Individual Printed Wiring Board PWB Mount

Pushbutton Plunger Thru Panel Housing Thru Panel Indicator Lens Thru Panel

See page 91 for panel punch manufacturer.

MULTI-UNIT PRINTED WIRING BOARD (PWB) MOUNT

Horizontal Mounting

Establish tooling holes on X coordinate and use these holes to establishrelationship between PWB and Panel

Terminals x0,20 0,76

.008 .030

Recommended hole size in PWB 1,17

.046

Switches must be fixtured to insure proper panel cutout alignment

Formula:N = Number of switches

X = N x10,16.400

Y =10,16

.400

Example: N = 5 Switches

X = 5 x 10,16.400

X = 50,80

2.00

Matrix Mounting Vertical Mounting

N = Number of SwitchesNX = Number of RowsNY = Number of Columns

Formula: X = N x10,16.400

Y = N x 10,16

.400

N = Number of Switches

Formula: Y = N x 10,16.400

X = 10,16.400

Example: N = 4Y = 4 x 10,16

.400

Y = 40,641.600





PRINTED WIRING BOARD MOUNT PUSHBUTTON SWITCHES/RECTANGULAR TYPEMML11 Switches PWB Pin Locations

PWB Receptacle Installed (LED or Incandescent Lamp)

MML21 Switches PWB Pin Locations


Notes:Micro Switch Identification This Side

2 – Linear measure mm/IN. or mmIN.

MML31 Switches

Manuals





PRINTED WIRING BOARD MOUNT INDICATORS/RECTANGULAR TYPE

MML41 Indicators




MML44 Indicators

MML46 Indicators


PWB Pad Location For Receptacle (LED or Incandescent Lamp)





PANEL MOUNT PUSHBUTTON SWITCHES/RECTANUGLAR TYPE

MML21 Switches

Solder Receptacle Installed (LED or Incandescent Lamp)



Rotate 45° counter clockwise for removalfrom switch or indicator

MML31 Switches Terminal Detail

Manuals





PANEL MOUNT INDICATORS/RECTANGULAR TYPE

MML41 Indicators


MML43 Indicators Terminal Detail



MML44 Indicators

MML46 Indicators






PRINTED WIRING BOARD MOUNT PUSHBUTTON SWITCHES AND INDICATORS/SQUARE TYPE

MML21 Switches


MML46 Indicators


NOTESMICRO SWITCH IDENTIFICATION THIS SIDEMML41: 2,0/.08MML46: 1,0/.04

3–LINEAR MEASURE mm/IN OR mmIN

PANEL MOUNT PUSHBUTTON SWITCHES/SQUARE TYPE

MML21 Switches Termination Detail

NOTE:To install LED or lamp, use MML93L receptacle shown on page 90.

Manuals





LENSES

RectangularPushbutton Lens

RectangularIndicator Lens

SquarePushbutton Lens

SquareIndicator Lens

PWB SUPPORT BRACKETS

Rectangular Square





PANEL CUTOUTS FOR PWB MOUNT PADDLE AND ROCKER SWITCHES

Actuator Housing Umbrella Rocker 2-Pole 2-PoleThru Panel Thru Panel Thru Panel MML33, 34 Actuator MML33, 34

Thru Panel Housing Thru PanelSee page 91 for panel punch manufacturer.

PRINTED WIRING BOARD MOUNT PADDLE AND ROCKER SWITCHES

MML23 Paddle Switches

See MML24 drawing below for PWB receptacle dimensions

MML24 Rocker Switches

With PWB Receptacle Installed (LED or Incandescent Lamp)

MML24 Rocker (Umbrella Type) Switches



Manuals





PANEL MOUNT PADDLE AND ROCKER SWITCHES

MML23 Paddle Switches



MML24 Rocker Switches

NOTE:To install LED or lamp, use MML93R recepta-cle shown on page 89.





HORIZONTAL MATRIX MOUNT/RECTANGULAR TYPEPrinted Wiring Board

Panel Mounting Detail Mounting Detail

Recommended Panel Cutout

10 127,00/5.000 124,56/4.904 10 188,14/7.407 180,64/7.112

9 114,30/4.500 111,86/4.404 9 170,36/6.707 162,86/6.412

8 101,60/4.000 99,16/3.904 8 152,58/6.007 145,08/5.712

7 88,90/3.500 86,46/3.404 7 134,80/5.307 127,30/5.012

6 76,20/3.000 73,76/2.904 6 117,02/4.607 109,52/4.312

5 63,50/2.500 61,06/2.404 5 99,24/3.907 91,74/3.612

4 50,80/2.000 48,36/1.904 4 81,46/3.207 73,96/2.912

3 38,10/1.500 35,66/1.404 3 63,68/2.507 56,18/2.212

2 25,40/1.000 22,96/ .904 2 45,90/1.807 38.40/1.512

1 12,45/ 0.49 10,26/0.404 N/A N/A N/A

NO. OF NO. OFSTRIPS W X STATIONS Y Z

Notes:1 – Linear measure mm/IN. or mm

IN.

Manuals





VERTICAL MATRIX MOUNT/RECTANGULAR TYPEPrinted Wiring Board


Recommended Panel Cutout

RECOMMENDED DIMENSIONS

10 177,80/7.000 175,26/6.900 10 137,34/5.407 129,69/5.106

9 160,02/6.300 157,48/6.200 9 124,64/4.907 116,99/4.606

8 142,24/5.600 139,70/5.500 8 111,94/4.407 104,29/4.106

7 124,46/4.900 121,92/4.800 7 99,24/3.907 91,59/3.606

6 106,68/4.200 104,14/4.100 6 86,54/3.407 78,80/3.106

5 88,90/3.500 86,36/3.400 5 73,84/2.907 66,19/2.606

4 71,12/2.800 68,58/2.700 4 61,14/2.407 53,49/2.106

3 53,34/2.100 50,80/2.000 3 48,44/1.907 40,79/1.606

2 35,56/1.400 33,02/1.300 2 35,74/1.407 28,09/1.106

1 17,78/ .700 15,24/ .600 1 23,04/ .907 15,39/ .606



IN.





MATRIX MOUNT/SQUARE TYPEPrinted Wiring Board


RECOMMENDED DIMENSIONS

10 127,00/5.000 124,56/4.904 10 137,16/5.400 129,84/5.112

9 114,30/4.500 111,86/4.404 9 124,46/4.900 117,14/4.612

8 101,60/4.000 99,16/3.904 8 111,76/4.400 104,44/4.112

7 88,90/3.500 86,46/3.404 7 99,06/3.900 91,74/3.612

6 76,20/3.000 73,76/2.904 6 86,36/3.400 79,04/3.112

5 63,50/2.500 61,06/2.404 5 73,66/2.900 66,34/2.612

4 50,80/2.000 48,36/1.904 4 60,96/2.400 53,64/2.112

3 38,10/1.500 35,66/1.404 3 48,26/1.900 40,94/1.612

2 25,40/1.000 22,96/ .904 2 35,56/1.400 28,24/1.112

1 12,70/ .500 10,26/ .404 1 22,86/ .900 15,54/ .612



IN.

Manuals


Manual Switches MML11 SeriesSolid State Pushbutton


LED, INCANDESCENT, OR NON-LIGHTED DISPLAY

PWB Mount Panel Mount

FEATURES1 Hall effect reliability1 Provides low voltage signals that

interface with nearly all DC logic1 Accepts one LED or incandescent

lamp1 Printed wiring board or snap-in panel

mounting1 UL recognized, CSA certified1 Bezels and mounting clips, LEDs and

legended lenses can be furnishedinstalled or ordered separately

Example: MML11KA3AAKSolid state pushbutton housing (black),no bezel; PWB terminals; momentary ac-tion; 5 VDC, current sinking output, blackplunger.

Example: MML11KK3AAKRSDRAs above, except furnished with black be-zel; mounting clips (long sides); red LED,and red lens installed.

MML11 ORDER GUIDECatalog listing codes for switch,less assembled display options

MML11K A 3 AA

Housing Type(Rectangular) Mounting Terminals Circuitry/Action

MML11KBlack housing

A No bezel (PWBmounting)

K Black bezel, mtg.clip/long sides

3 Printed wiring board AA 5-24 VDC sinkingmom. action


Manual Switches MML11 SeriesSolid State Pushbutton Switches


Electrical Data Page 69Strip and matrix mounting Page 85Mounting dimensions Page 93PWB pin locations Page 93LED/receptacle Page 87/88Lamp/LED Page 89/90

Current Sinking OutputA permanent magnet plunger moves ad-jacent to the Hall effect integrated circuitto give a digital, current sinking (normallyhigh and normally low) output.

Order display options assembled to switch by adding codes below

K RS DRLeave this space blank,

if legend not desired

PlungerLED(Stanley Type) Lens Legend

K Black XX No LEDRS Red*YS Yellow*GS Green*

* Permanently installed.

For LED display:DR RedDY YellowDG Green

For incandescent or non-lighted display:LR RedLY YellowLG GreenLW WhiteLK Black

20 With Legend

Use Legend Order Sheet FO-74024to cover each catalog listing (seepage 83).

CUSTOMER INSTALLATION:LED1. Order LED and receptacle, page 87.2. Installation instructions, page 88.

Incandescent Lamp1. Order lamp/PWB receptacle or lamp/solder

receptacle, page 89.2. Installation instructions, page 90.

Manuals


Manual Switches MML21 SeriesElectronic Control Pushbutton


LED, INCANDESCENT, OR NON-LIGHTED DISPLAY

PWB Mount Panel Mount(Standard plunger) (Standard plunger)

PWB Mount(One-piece plunger)

FEATURES1 Silver or gold contacts1 Choice of rectangular or square

housings1 Accepts one LED or incandescent

lamp1 Printed wiring board or snap-in panel

mounting1 Bezels and mounting clips, LEDs and


1 UL recognized, CSA certified

Example: MML21KK3AAKElectronic control pushbutton switch withstandard plunger; rectangular housing(black); bezel (black); mounting clips onlong sides, PWB terminals; 1-pole, mo-mentary action, silver contacts, blackplunger.

Example: MML21KK3AAKRSDRAs above, except furnished with red LEDand red lens installed.

MML21KK3AAHRSXX20 as above, leg-ended.

MML21 STANDARD PLUNGER SWITCHES ORDER GUIDECatalog listing codes for switch, less assembled display options

MML21K K 3 AA

Housing Type Mounting Terminals Circuitry/Action (Each pole is double throw)

Rectangular Square Rectangular Square

MML21KRectangular Black HousingMML21HSquare Black Housing




R Black bezel& mtg. clip

3 PrintedWiringBoard

2 Solder

Silver Contacts:AA 1 pole,

mom. actionAB 1 pole,

alt. actionAC 2 pole,

mom. actionAD 2 pole,

alt. actionGold Contacts:BA 1 pole,

mom. actionBB 1 pole,

alt. actionBC 2 pole,

mom. actionBD 2 pole,

alt. action

Silver contacts:AA 1-pole,

mom. actionAB 1-pole,

alt. action

Gold contactsBA 1-pole,

mom. actionBB 1-pole,

alt. action

MML21 ONE PIECE LENS/PLUNGER SWITCHES ORDER GUIDE Catalog listing codes for switch, less assembled display options

MML21H K 3 AA

Housing Type Mounting Terminals Circuitry/Action (Each pole is double throw)

Rectangular Square Rectangular Square

MML21KRectangular Black HousingMML21HSquare Black Housing



A No bezel (PWBMounting)

R Black bezel& mtg. clip

3 PrintedWiringBoard

2 Solder

Silver Contacts:AA 1 pole,

mom. actionAB 1 pole,

alt. actionAC 2 pole,

mom. actionAD 2 pole,

alt. actionGold Contacts:BA 1 pole,

mom. actionBB 1 pole,

alt. actionBC 2 pole,

mom. actionBD 2 pole,

alt. action

Silver contacts:AA 1-pole,

mom. actionAB 1-pole,

alt. action

Gold contactsBA 1-pole,

mom. actionBB 1-pole,

alt. action


Manual Switches MML21 SeriesElectronic Control Pushbutton Switches


Electrical Data Page 69Bezels Page 86Strip and matrix mounting Page 85PWB pin locations Page 93


K RS DR

Plunger Type LED* Lens Legend

K Black

W White

XX No LedRS RedYS YellowGS Green

XX No Lens

For LED DisplayDR RedDY YellowDG Green

For Incandescentor Unlighted DisplayLR RedLY YellowLG GreenLW WhiteLK Black

20With Legend (LeaveBlank if no legendneeded

Use Legend Order SheetFO-74024 to cover eachcatalog listing. (See page83.)





H RS

Button Color (One Piece Plunger) LED* Legend

For LED DisplayH RedL YellowN Green

For Incandescent or non-light displayR RedY YellowG GreenZ Black

XX No LEDRS RedYS YellowGS Green

XX20With Legend (Leave Blank if nolegend needed

Use Legend Order Sheet FO-74024 tocover each catalog listing. (See page83.)

*Notes:1. When an LED is specified in a rectangular MML21 listing, MICRO SWITCH will

permanently install it in the housing.

2. MICRO SWITCH does not permanently install an LED in a square MML21listing. To install an LED in a square housing, order a MML93L or MML93Greceptacle and a MML92 LED (see pages 88 and 90).

Manuals


Manual Switches MML23/24 SeriesElectronic Control Paddle


NON-LIGHTED DISPLAY


FEATURES1 Printed circuit board or snap-in panel

mounting1 Bezels and mounting clips can be

furnished installed or orderedseparately


Example: MML23KA3AA01KElectronic control paddle switch withblack housing; printed wiring boardmounting; printed wiring board terminals;1 pole, silver contacts; 2-position, main-tained action; one circuit ON in each posi-tion; black paddle.

MML23 ORDER GUIDE

MML23K A 3 AA

Housing Type Mounting Terminals Circuitry

MML23KBlack housing

A No bezel (PWB mounting)K Black bezel, mtg. clip/long sides

3 Printed wiring board2 Solder

Insert code lettersfrom Circuitry Chart

Electronic Control Rocker Switches MML24LED, INCANDESCENT, OR NON-LIGHTED DISPLAY

PWB Mount Panel Mount PWB Mount(Lighted rocker)

PWB Mount(Umbrella rocker)

FEATURES1 Accepts one or two LEDs or

incandescent lamps which areordered separately

1 Printed wiring board mounting orsnap-in panel mounting

1 Bezels and mounting clips can befurnished installed or orderedseparately


MML24 ORDER GUIDE (Catalog listing for switch, less assembled display options)

MML24K A 3 AAHousing Type Mounting Terminals Circuitry

MML24KBlack housing


3 Printed wiring board2 Solder

Insert code lettersfrom Circuitry Chart


Manual Switches MML23/24 SeriesElectronic Control Paddle


Electrical Data Page 69Bezels Page 86Strip and matrix mounting Page 85Mounting dimensions Page 99/100PWB pin locations Page 99Rockers and paddles are permanently installed.

CIRCUITRY2-Position 3-Position

Silver GoldContacts ContactsAA BA

AC BC

The ‘‘MICRO SWITCH’’ identification is shown on this side of the switch housings.

Order display options assembled to switch by adding codes below.

OPERATING ACTION2-Position 01 Maint. None Maint.

02 Mom. None Maint.

03 Maint. None Mom.

3-Position 04 Maint. Maint. Maint.

05 Mom. Maint. Mom.

07 Mom. Maint. Maint.

01 K

Action Paddle

Insert codenumbers fromOperatingAction Chart

K Black

Example: MML24KA3AA01HDRXXElectronic control rocker switch withblack housing, printed wiring boardterminals; 1 pole, silver contacts; 2-position, maintained action; one cir-cuit ON in each position; black rock-er, red lens for LED display in Side 1and no lens in Side 2.

Note: Umbrella rockers are availa-ble with PWB terminals only.

01 H DRXXLeave blank,if legend notdesired

Action Rocker Lens Legend

Insert codenumbersfromOperatingActionChart

K Black rocker, non-lightedH Black rocker, one lens*F White rocker, one lens*

* Lighted switches with solder terminalsrequire MML93R receptacle to installlamps or LEDs. See Page 90.

Side 1 Side 2XX None XX None

LED Incand.display: display:DR Red LR RedDY Yellow LY YellowDG Green LG Green

LW White

LED Incand.display: display:DR Red LR RedDY Yellow LY YellowDG Green LG Green

LW White

20 With legend

Use legend ordersheet FO-74193to cover eachcatalog listing(see page 84).




Manuals


Manual Switches MML31 SeriesPower Duty Pushbutton


NON-LIGHTED DISPLAY


FEATURES1 Printed circuit board or snap-in panel

mounting1 Bezels and mounting clips, and



Example: MML31KK2AAKPower duty pushbutton switch housing(black); bezel (black) and mounting clips;solder terminals; 1 pole, momentary ac-tion; black plunger.

Example: MML31KK2AAKLRAs above, except furnished with red lens.

MML31 ORDER GUIDECatalog listing codes for switch,less assembled display options

MML31K K 2 AA

Housing Type(Rectangular)

Mounting Terminals Circuitry/Action(Each pole is single-throw, normallyopen)

MML31KBlackhousing,non-lighted


3 Printed wiring board2 Solder/Quick-connect

AA 1 pole, mom. actionAB 1 pole, alt. actionAC 2 poles, mom. actionAD 2 poles, alt. action


Manual Switches MML31 SeriesPower Duty Pushbutton


Electrical data Page 69Bezels Page 86Strip and matrix mounting Page 85Mounting dimensions Page 99/100PWB pin locations Page 99

Order display options assembled toswitch by adding codes below

K LRLeave this space blank,

if legend not desired

Plunger Lens Legend

K Black LR RedLY YellowLG GreenLW WhiteLK Black

20 With Legend

Use Legend Order SheetFO-74024 to cover eachcatalog listing (see page83).

Manuals


Manual Switches MML41/46 SeriesIndicators/Pushbutton Style


LED OR INCANDESCENT DISPLAY


FEATURES1 Accepts one LED or incandescent

lamp

MML41indicators resemble a pushbuttonswitch with the button in the ‘‘down’’ posi-tion.

MML41 ORDER GUIDECatalog listing codes for indicator, less assembled display options

MML41K A 3 K

Housing Type (Rectangular) Mounting Support Posts/Terminals Plunger

MML41KBlack housing

A No bezel (PWB mounting only)K Black bezel, mtg. clip/long sides

3 PWB* (‘‘A’’ mtg. only)2 Solder0 None

For panel mount andstrip/matrix mount

K Black

Indicators/Flush Mount MML46LED OR INCANDESCENT DISPLAY

PWB Mount Panel Mount PWB Mount Panel Mount

FEATURES1 Accepts one or two LEDs or

incandescent lamps1 Bezels and mounting clips, LEDs and


MML46 ORDER GUIDECatalog listing codes for indicator, less assembled display options

MML46K A 3

Housing Type Mounting Support Posts

Rectangular*(1 or 2 LEDs orincand. lamps)

MML46KBlack housing

Square*(1 LED orincand. lamp)

MML46HBlack housing

Rectangular:A No bezel (PWB mounting only)K Black bezel, mtg. clip/long sides

Square:A No bezel (PWB mounting

only)R Black bezel, mounting clips

3 PWB (‘‘A’’mtg. only)

2 Solder**0 None

For snap-inand strip/matrix mount

** Rectangularhousings only.

* Notes:1. When an LED is specified in a rectangular MML46 listing, MICRO SWITCH will permanently

install it in the housing.2. MICRO SWITCH does not permanently install an LED in a square MML46 listing. To install

an LED in a square housing, order a MML93L or MML93G receptacle and a MML92 LED(see pages 88 and 90).


Manual Switches MML44 SeriesIndicators


LED DISPLAY


FEATURES1 Accepts one LED only1 Bezels and mounting clips, and


Example: MML44KAAIndicator housing (black) which will ac-commodate one LED, no bezel

Example: MML44KA3RSDRAs above, except furnished with red LED(PWB terminals) and lens installed.

MML44 ORDER GUIDE

Catalog listing codes for indicator, less assembled display options

MML44K A 3 RS

Housing Type(Rectangular) Mounting Terminals LED

(Stanley type)

MML44KBlack housing

A No bezel (PWB mounting)K Black bezel, mtg. clip/long sidesM Black bezel, mtg. clip/short sides

A None2 Solder3 Printed wiring

board*

XX NoRS RedYS YellowGS Green

*Use only ifassembled LED isspecified.


Manual Switches MML44 Series


Bezels Page 86LEDs Page 88Lenses Page 82Strip mounting Page 85Mounting dimensions Page 92/94PWB pin locations Page 93/93

Order display options assembled toindicator by adding codes below

DRLeave this space blankif legend not desired

Lens Legend

DR RedDY YellowDG GreenDC Clear

20 With legend

Use Legend Order Sheet FO-74024 to cover eachcatalog listing.

CUSTOMERINSTALLATION:LED1. Order LED and

receptacle, page 87.2. Installation instructions,

page 88.

Manuals


Manual Switches MML51 SeriesButton Lenses/Incandescent or Non-lighted Display


MML51 ORDER GUIDEFor standard plunger MML pushbuttons.

MML51E 20 R

Lens Type Display/Legend Type Color

Rectangular Lenses:MML51ESwitch lens*MML51GIndicator lens

*Use MML51E with MML41rectangular pushbutton styleindicators.

Transmitted Color:10 No legend20 With legend

R RedY YellowG GreenW WhiteK Black

(Opaque)

Example: MML51E20RIncandescent or non-lighted displayswitch lens; red transmitted color, withlegend.

LEGENDINGUse the MML Legend Order Sheetson pages 83 and 84 to specifylegending.

Button Lenses/LED or Neon Display MML52MML52 ORDER GUIDEFor standard plunger MML pushbuttons.

MML52G 10 Y

Lens Type Display/Legend Type Color/Illumination

Rectangular Lenses:MML52ESwitch lens, LED displayMML52G*Indicator lensLED display

* Use MML52E with MML41rectangular pushbutton styleindicators.

Transmitted Color:10 No legend20 With legend

LED Display:R RedY YellowG GreenC Clear

Example: MML52G10YLED display indicator lens; yellowtransmitted color, no legend.

HOW TO INSTALL LENSESKeytabs on two sides of the lenses matewith matching button slots.

Rectangular lenses have tabs on thelong sides. Seat a long side beforesnapping in place.

HOW TO INSTALL LENSES

1. Seat lens. 2. Snap in place.


Manual Switches MML61 SeriesStrip Mounting Frames


MML61 ORDER GUIDE

MML61K 5

Orientation/Color No. of Stations

For Rectangular* Housings:MML61KHorizontal strip, blackMML61GVertical strip, black

For Square HousingsMML61JBlack

* * .4N x .6N housings only.

1 One2 Two3 Three4 Four5 Five6 Six7 Seven8 Eight9 Nine

10 Ten

Note: Switches and indicators are ordered asseparate items.

FEATURES1 Provides back of panel or printed

wiring board mounting in a multi-unitstrip of switches/indicators.

1 Devices can be pre-wired prior toinstallation.

1 Holes at each end of frame will acceptNo. 4 screws.

Example: MML61K5Black 5-station strip mounting frame, hor-izontal orientation.

Refer to pages 101, 102 and 103 formounting dimensions.

Manuals


Manual Switches MML72 SeriesBezels/Mounting Clips


1. Slip mounting clip over top of switch/indicator housing.

2. Snap bezel onto mounting clip.

Recommended panel thickness forpanel mounted units is .050 to .094 in.(1,27 to 2,39 mm).

MML72 ORDER GUIDE(Incl. bezel & mounting clips)

MML72EE K

Type Color

For Rectangular* Housings:MML72EE*Switch: Mtg. clips on long sides

* Use this type with MML41 rectangular pushbuttonstyle indicators.

K Black

Example: MML72EEKBlack switch bezel, mounting clips onlong sides.

TO ORDER MOUNTING CLIPSSEPARATELY

For Rectangular Housings:MML73EA (long sides)MML73EB (short sides)

For Square Housings:MML73BA

PWB Mount Support Bracket MML74 SeriesThese metal frames with PWB supportterminals provide added rigidity for stand-alone PWB mounted switches and indica-tors. They are not for use with MML57 but-tons.

See page 98 for mounting dimensions.

MML74 ORDER GUIDE

CatalogListing For Use With:

MML74E Rectangular .4N x .6N housings

MML74B Square housings


Manual Switches MML91/93 SeriesIncandescent Lamp Assemblies


MML91 LAMP/PWB RECEPTACLE ORDER GUIDE

Catalog ListingLamp Use To Incl. Lamp & IndustryType Illuminate Voltage PWB Receptacle Lamp No.

T-1 1 Rectangular 5 MML91C 715(unbased) button lens 10 MML91BC 7218

14 MML91CC 811128 MML91DC 6838

T-1 2 Square 5 MML91E 7715(bi-pin) button lens 10 MML91BE 8095

and MML24 14 MML91CE 8098rocker lens 28 MML91DE 7839

Notes:1 To order PWB receptacle separately, specify MML93H.2 To order PWB receptacle separately, specify MML93G.

MML91 LAMP/SOLDER RECEPTACLE ORDER GUIDE

Catalog ListingLamp Use To Incl. Lamp & IndustryType Illuminate Voltage Solder Receptacle Lamp No.

T–1 3 Rectangular 5 MML91D 7715(bi-pin) button lens 10 MML91BD 8095

14 MML91CD 809828 MML91DD 7839

Catalog Listing 4

Lamp Use To T-1 (Unbased) IndustryType Illuminate Voltage Solder Receptacle Lamp Only Lamp No.

T-1 Square 5 MML93L MML91A 715(unbased) button lens 10 MML93L MML91BA 7218

14 MML93L MML91CA 811128 MML93L MML91DA 6838

T-1 MML24 5 MML93R MML91A 715(unbased) rocker lens 10 MML93R MML91BA 7218

14 MML93R MML91CA 811128 MML93R MML91DA 6838

Notes:3 To order solder receptacles separately, specify MML93J.4 Order solder receptacles and T-1 lamp listings for complete assembly.

Manuals


Manual Switches MML93 SeriesLED/Incandescent Lamp Receptacles


User installed. Certain MML switchesand indicators will accept incandescentlamps, where specified in the orderguides.

These lamps are ordered separately andinstalled by the user, per the proceduresdescribed below.

LAMP INSTALLATION

1. With Printed Wiring BoardReceptacle for MML93G andMML93H only.Use PWB receptacles to permitlamps to be added or replaced frombehind the printed wiring board,without soldering.

These receptacles are for use withrectangular pushbuttons, squarepushbuttons and MML24 rocker lensonly.

Printed wiring boards are notsupplied.

1. Insert the PWB receptacle/incandescent lamp assemblythrough a hole in the printed wiringboard.

2. A 1⁄8–turn applied clockwise to thereceptacle locks it in the printedwiring board and establishes theelectrical connection.

2. With Solder Terminal Receptaclefor MML93J bi-pin onlyThis receptacle attaches directly tothe rear of panel-mounted units. Itenables lamps to be added orreplaced without rewiring.

This receptacle is for use with allrectangular pushbuttons and MML41or MML46 rectangular indicatorsonly.

1. Insert solder terminal receptacle intohole in base of panel mount unit.

2. A 1⁄8–turn clockwise applied to thereceptacle locks it in the base.

3. With Solder Terminal Receptaclesfor MML93L/93R Unbased Only orT-1 LED.Use the receptacles shown at right toinstall T–1 LEDs or T–1 unbased lampsin panel-mounted MML21 squarepushbutton switches and MML24rocker switches.

Procedure:1. Assemble LEDs or lamps to

receptacles (leads first).2. Snap receptacle into slots in housing

base.3. Solder directly to leads.


Manual Switches MML92 SeriesLEDs


Factory installed. Certain MML switchesand indicators can be furnished withLEDs permanently factory installed,where specified in the order guides.

User installed. LEDs can also be orderedseparately and installed in these productsby the user, per the procedures de-scribed below.

LED INSTALLATION

1. With Printed Wiring BoardReceptacle. (MML93K)PWB receptacle enables T-1 3⁄4 or T-1LEDs to be added or replaced from be-hind the printed wiring board, withoutsoldering. LEDs and receptacles areordered separately. See page 87.

Printed wiring boards are not supplied. 1. Insert the LED/PWB receptacle as-sembly through a hole in the printedwiring board.

2. A 1⁄8–turn applied clockwise to the re-ceptacle locks it in the printed wiringboard and establishes the electricalconnection.

2. With Solder Terminal Receptacle.(MML93J)This receptacle attaches directly to therear of panel-mounted units. It enablesincandescent lamps to be added or re-placed without rewiring. LEDs and re-ceptacles are ordered separately.

This receptacle is for use with all rect-angular pushbuttons and MML41 orMML46 rectangular indicators only. 1. Insert solder terminal receptacle into

hole in base of panel mount unit.2. A 1⁄8–turn clockwise applied to the re-

ceptacle locks it in the base.

3. By Soldering To Printed WiringBoard.In this procedure, the housing ismounted on the printed wiring boardafter the T-1 3⁄4 LED has been seated.

This procedure can be used with anyMML having PWB terminals.

1. Assemble stand-off spacer to LED ter-minals and seat on printed wiringboard.

2. Seat housing on printed wiring board,with LED projecting into hole at thebase of the housing.

4. By Soldering to Printed Wiring Boardor Leadwire (MML44 indicatorsonly).T-1 3⁄4 LEDs are added to MML44 indi-cators via a procedure which is uniqueto this product. The LED is insertedfrom the top of the housing with theleadwires protruding through thehousing base.

1. Assemble LED to MML44 indicator,with the LED terminals protrudingthrough assembly slot in the middle ofhousing base.

2. Use pencil eraser to snap LED securelyin place.


Manual Switches MML92/93 SeriesLEDs


LED APPLICATION INFORMATION

To insure stable conditions, suitable ex-ternal control of the LED current must beprovided. It is recommended that a mini-mum of 5 VDC open circuit voltage withan appropriate series resistance be usedto drive LED devices. This minimizes cur-rent variation and its effect on temper-ature and forward voltage of the LED.

Maximum drive current is 30 mA. Reversevoltage breakdown of the LED’s is 4 volts(min.).

Resistor values can be determined bysupply voltage or current for LED:

RS =E – Vf

If

WHERE: RS = Series ResistanceE = Supply VoltageVf = Forward Voltage

of LEDIf = Circuit Current

MML92 ORDER GUIDELEDs should be the same color as the lenses they illuminate. They are packed 10 per listing, including stand-off spacers for usewhen solder terminating to a printed wiring board, per procedure 3 on page 88.

Forward LEDLED Use To Catalog LED Characteristics Manufacturers’Type Illuminate Listing Color Typ. @ 20mA Max. Part Numbers

Stanley:T–13⁄4 Rectangularbutton lens MML92ERS

MML92EGSMML92EYS

RedGreenYellow

1.7 V2.1 V2.1 V

2.0 V2.5 V2.5 V

ESBR5633ESBG5633ESAY5633

Hewlett Packard:MML92ERHMML92EGHMML92EYH

RedGreenYellow

2.2 V2.3 V2.2 V

3.0 V3.0 V3.0 V

HLMP-3366HLMP-3568HLMP-3466

Stanley:T–1 Square buttonlens, MML24rocker lensrectangularbutton lens

MML92HRSMML92HGSMML92HYS

RedGreenYellow

1.7 V2.1 V2.2 V

2.0 V2.5 V2.5 V

ESBR3901ESPY3901ESAY3901

Hewlett Packard:MML92HRHMML92HGHMML92HYH

RedGreenYellow

2.2 V*2.3 V*2.2 V

3.0 V3.0 V3.0 V

HLMP-1340HLMP-1540HLMP-1440

Long lead: Anode (+). Short lead: Cathode (−).* @ 25 mA.

MML93 LED PWB RECEPTACLE ORDER GUIDE

LEDType Use to Illuminate

CatalogListing

T-13⁄4 Rectangular button lens or umbrella buttonlens MML93K

T-1 Square button lens or MML24 rocker lens MML93G

MML93 LED SOLDER TERMINAL ORDER GUIDE

LEDType Use to Illuminate

CatalogListing

T-1 Square button MML93L

T-1 MML24 rocker lens MML93R

T-1 Rectangular button MML93J

Manuals


Manual Switches MML91/93 SeriesIncandescent Lamp Assemblies


MML91 LAMP/PWB RECEPTACLE ORDER GUIDE

Catalog ListingLamp Use To Incl. Lamp & IndustryType Illuminate Voltage PWB Receptacle Lamp No.

T-1 1 Rectangular 5 MML91C 715(unbased) button lens 10 MML91BC 7218

14 MML91CC 811128 MML91DC 6838

T-1 2 Square 5 MML91E 7715(bi-pin) button lens 10 MML91BE 8095

and MML24 14 MML91CE 8098rocker lens 28 MML91DE 7839

Notes:1 To order PWB receptacle separately, specify MML93H.2 To order PWB receptacle separately, specify MML93G.

MML91 LAMP/SOLDER RECEPTACLE ORDER GUIDE

Catalog ListingLamp Use To Incl. Lamp & IndustryType Illuminate Voltage Solder Receptacle Lamp No.

T–1 3 Rectangular 5 MML91D 7715(bi-pin) button lens 10 MML91BD 8095

14 MML91CD 809828 MML91DD 7839

Catalog Listing 4

Lamp Use To T-1 (Unbased) IndustryType Illuminate Voltage Solder Receptacle Lamp Only Lamp No.

T-1 Square 5 MML93L MML91A 715(unbased) button lens 10 MML93L MML91BA 7218

14 MML93L MML91CA 811128 MML93L MML91DA 6838

T-1 MML24 5 MML93R MML91A 715(unbased) rocker lens 10 MML93R MML91BA 7218

14 MML93R MML91CA 811128 MML93R MML91DA 6838

Notes:3 To order solder receptacles separately, specify MML93J.4 Order solder receptacles and T-1 lamp listings for complete assembly.

Manuals


Manual Switches MML93 SeriesLED/Incandescent Lamp Receptacles


User installed. Certain MML switchesand indicators will accept incandescentlamps, where specified in the orderguides.

These lamps are ordered separately andinstalled by the user, per the proceduresdescribed below.

LAMP INSTALLATION

1. With Printed Wiring BoardReceptacle for MML93G andMML93H only.Use PWB receptacles to permitlamps to be added or replaced frombehind the printed wiring board,without soldering.

These receptacles are for use withrectangular pushbuttons, squarepushbuttons and MML24 rocker lensonly.

Printed wiring boards are notsupplied.

1. Insert the PWB receptacle/incandescent lamp assemblythrough a hole in the printed wiringboard.

2. A 1⁄8–turn applied clockwise to thereceptacle locks it in the printedwiring board and establishes theelectrical connection.

2. With Solder Terminal Receptaclefor MML93J bi-pin onlyThis receptacle attaches directly tothe rear of panel-mounted units. Itenables lamps to be added orreplaced without rewiring.

This receptacle is for use with allrectangular pushbuttons and MML41or MML46 rectangular indicatorsonly.

1. Insert solder terminal receptacle intohole in base of panel mount unit.

2. A 1⁄8–turn clockwise applied to thereceptacle locks it in the base.

3. With Solder Terminal Receptaclesfor MML93L/93R Unbased Only orT-1 LED.Use the receptacles shown at right toinstall T–1 LEDs or T–1 unbased lampsin panel-mounted MML21 squarepushbutton switches and MML24rocker switches.

Procedure:1. Assemble LEDs or lamps to

receptacles (leads first).2. Snap receptacle into slots in housing

base.3. Solder directly to leads.


Multi-Light Oiltight Controls CMC Series


INDICATOR PUSHBUTTON

SELECTORSELECTOR-PUSH2-3-4 POSITION

2-3-4 POSITION

MULTI-LIGHT OILTIGHT CONTROLS

CMC square, multi-light controls are ideal for process controlpanels. They are available with selector, pushbutton, and select-or-push actuators, and mechanical or electronic duty contactblocks.

1 Indicators, pushbuttons, selectors, and selector-push units1 Mechanical and electronic duty contact blocks1 Contact blocks tandem mount behind operator1 More circuitry control than with any other control by using

four plunger adapter kit1 Legend plates with legending in square or diagonal formats1 Bright, lighted displays with good contrast for easy

identification1 Square shape is compatible with other panel controls1 Rotary cam-actuated contact blocks1 NEMA 13, oiltight and dusttight1 CSA certified no. LR573261 UL listed file no. E37138

TABLE OF CONTENTSCMC Multi-light Oiltight Controls

Contact blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4Four plunger adapter kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Ordering guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Terminal construction for lamp operation . . . . . . . . . . . . . . . 6Indicators and pushbuttons . . . . . . . . . . . . . . . . . . . . . . . . . . 7910 and 913 selectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8911 and 914 selector-push units . . . . . . . . . . . . . . . . . . . . . . 10Cover plates, color inserts, and legend plates . . . . . . . . . 12Legend plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Typical CMC applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Specification sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Legend order sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Replacement parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Mounting dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25920/921 rotary cam-actuated contact blocks . . . . . . . . 26Typical applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Other MICRO SWITCH Solutions . . . . . . . . . . . . . . . . . . . . . 30


TED RUDOLPH

SOLD TO SENASYS LLC 888-736-2797

Multi-Light Oiltight Controls CMC SeriesIndicators and Pushbuttons


1 Suitable for use in NEMA 13enclosures.

Indicator1 Four lighted quadrants1 Two or four transformers, 120 or 240

VAC1 Jumpers available for low voltage

applications.1 Resistor boards available for 24V or

48V supply

1 Each lamp individually controlled1 Cover plates, color inserts, and

legend plates are ordered separately.

Pushbutton1 Actuate up to four 2-plunger contact

blocks in any combination1 Lighted and unlighted versions

available

1 Two or four transformers, 120 or 240VAC

1 Jumpers available for low voltageapplications

1 Resistor boards available for 24V or48V supply

1 Each lamp individually controlled.1 Cover plates, color inserts, and

legend plates are ordered separately

INDICATOR CATALOG LISTING PUSHBUTTON CATALOG LISTING

908AAA-- 909AAA--Gray Button

909BAA--Black Button

ORDER GUIDEComplete the last two blanks of the cata-log listing with the terminal number,which is colored in the table at the right.

Order incandescent cover plate, color in-serts, and legend plate separately frompage 12.

Order LED lamps and color inserts sep-arately.

6VAC/DC - Page 1424VAC/DC - Page 15

Contact blocks may be ordered separate-ly from page 4.

QUADRANT AREAS

908AAA--, 909AAA--, 909BAA--

67 —Unlighted

FOUR TERMINAL UNITS use with 2 lamps

95 —120 VAC transformers (2) and No. 755 lamps in quadrants A & B, nothing in quads C & D96 —120 VAC transformers (2) and No. 755 lamps in quadrants C & D, nothing in quads A & B97 —Line voltage jumpers in quadrants A & B, no lamps, nothing in quads C & D. Can be

used with incandescent or LED bulbs.98 —Line voltage jumpers in quadrants C & D, no lamps, nothing in quads A & B. Can be

used with incandescent or LED bulbs.38 —120 VAC transformers (2) in quadrants A & B. Quadrants C & D unlighted. For use with 6

volt LED lamps and color inserts. Order from page 14.

FIVE TERMINAL UNITS use with 4 lamps

01 —120 VAC transformers (4) and (4) No. 755 lamps02 —240 VAC transformers (4) and (4) No. 755 lamps03 —Line voltage jumpers (4)—Less lamps1. Can be used with incandescent or LED bulbs.40 —48 volt resistors (4) and (4) No. 1819 lamps05 —24 volt resistors (4) and (4) No. 756 lamps15 —120 VAC transformers (4). For use with 6 volt LED lamps and color inserts. Order from

page 14.16 —240 VAC transformers (4). For use with 6 volt LED lamps and color inserts. Order from

page 14.

EIGHT TERMINAL UNITS use with 4 lamps

51 —120 VAC transformers (4) and (4) No. 755 lamps52 —240 VAC transformers (4) and (4) No. 755 lamps53 —Line voltage jumpers (4) less lamps1. Can be used with incandescent or LED bulbs.90 —48 volt resistors (4) and (4) No. 1819 lamps50 —24 volt resistors (4) and (4) No. 756 lamps55 —120 VAC transformers (4). For use with 6 volt LED lamps and color inserts. Order from

page 14.56 —240 VAC transformers (4). For use with 6 volt LED lamps and color inserts. Order from

page 14.1 See Page 23 for 2-28 volt lamp recommendations.Contact MICRO SWITCH Branch Office for combinations of lamp voltages in one unit.


Multi-Light Oiltight Controls CMC SeriesFour Plunger Adapter Kit


1 Exclusive four plunger actuation for se-lector and selector-push units.

1 Affords more circuit sequencing possi-bilities by using all four points on thecam.

1 Any combination of heavy duty andelectronic duty contact blocks (up tofour) may be used per operator.

Catalog ListingPTCA

CIRCUIT SEQUENCING CONTROLCOMPARISON

2 PLUNGER ACTUATION

TURNCAM

BLOCK 1

BLOCK 2

BLOCK 3

BLOCK 4

4 PLUNGER ACTUATION

BETWEEN BLOCKS 1 & 2

TURNCAM

BLOCK 1

4 PLUNGERADAPTER

BLOCK 2

BLOCK 3

BLOCK 4

* 4 Plunger Adapter Kit (Catalog Listing PTCA) in-cludes two sets of auxiliary and offset plungers. Oneset is .200 inch longer than the other set in order tomatch the variation in 2-circuit and 4-circuit blockdepth.


Multi-Light Oiltight Controls CMC SeriesRotary Contact Blocks


ELECTRICAL INTERRUPTINGRATINGS (amperes)The electrical ratings are 600 VAC, 250VDC and 20 amperes continuous carry or180 amperes for three seconds.

920/921 CMC ROTARY CAM-ACTUATED CONTACT BLOCKS1 Up to 12 positions available1 Controls up to 24 circuits1 Positive detent between positions1 Mechanical memory stages

The 920/921CMC series are highly versa-tile rotary cam-actuated contact blocksavailable with CMC selectors. These con-tact blocks are ideal for applications re-quiring a large number of contacts actuat-ed simultaneously by one device. Theyare designed for control circuits in appli-cations such as instrumentation andpower generation.

MECHANICAL MEMORYA special cam and slip clutch (M210) canbe specified to provide mechanical mem-ory.

Drawing A

Drawing B

Drawing A represents a three position se-lector with spring return from both direc-tions. Circuits 7 and 8 - contacts, 13-14and15-16 are the slip (mechanical memo-ry) contacts. M210 is the slip clutch. Draw-ing B is a simplified explanation of howmechanical memory works.

1. In the center position step 1, contacts13-14 and 15-16 are open. The switch(drawing A) is in the normal after TRIPposition.

2. Step 2 shows the contact closures asthe knob is rotated clockwise to theCLOSE position, (13-14 and 15-16close).

3. Step 3 illustrates that the contacts re-main closed after the selector knobspring-returns to the center position.

4. In step 4, the knob is rotated counter-clockwise to the TRIP position, open-ing contacts 13-14 and 15-16.

5. This state is maintained after the knobspring-returns to center, step 5.


Multi-Light Oiltight Controls CMC SeriesRotary Contact Blocks


TYPICAL APPLICATION 920 CMC (LOCKOUT)

Circuit BreakerControl Switchwith Lockout

For identification ONLYDo not build catalog listings from this information. Seenext page for ordering information.

Number Degrees Start Switchingof Between Selector Position StagePositions Position Action Lamp Service Orientation Type

Selector920

A Two Position A 30° A Maintained 01 A 0° Four Digit NumberB Three Position B 45° 02 B 30° Assigned by FreeportC Four Position C 60° B CW Spring Return 05 C 45°D Five Position D 90° C CCW Spring Return 40 D 60°E Six Position E Various D CW & CCW Spring Return 50 E 90°F Seven Position E CW & CCW Spring Return and Lockout 51 F 120°G Eight Position F CW Spring Return and Lockout 52 G 135°H Nine Position 90 H 150°J Ten Position J 180°K Eleven Position 03 K 210°L Twelve Position 53 L 225°

M 240°67 N 270°

P 300°95 R 315°96 S 330°

T 345°97 U 285°98

Selector-Push921


Multi-Light Oiltight Controls CMC SeriesSelector - Push Units


V V

CMC SELECTORS1 Suitable for use in NEMA 13 enclosures.1 Accepts 4 plunger adapter kit

Example:911 A G

Operator

911 —Grey knob914 —Black knob

Turn CamConfiguration

Insert the turn cam comfiguration codefrom the shaded area of the chart below.

1. Match your circuit requirements in onecam code column in the chart below.*

2. Develop the catalog listing of the unit,including the shaded letters of the camcode configuration selected in step 1from the chart below.

3. Consider position number1as the fur-thest counter-clockwise device position.Order contact block(s) and adapter kit asindicated in the left hand column of thecam code selection chart.

Selector Action

2 Position 3 Position 4 Position

A – Pos. 1, 2E – Pos. 2, 3H – Pos. 3, 4L – Pos. 4, 1

U – Pos. 9, 12o’clock

V – Pos. 12, 3o’clock

W – Pos. 3, 6o’clock

X – Pos. 6, 9o’clock

B – Pos. 1, 2, 3F – Pos. 2, 3, 4J – Pos. 3, 4, 1M – Pos. 4, 1, 2

P – Pos. 9, 12,3 o’clock

R – Pos. 12, 3,6 o’clock

S – Pos. 3, 6,9 o’clock

T – Pos. 6, 9,12 o’clock

C – Pos. 1, 2, 3, 4no stop

D – Pos. 1, 2, 3, 4stop between1 and 4

G – Pos. 2, 3, 4, 1stop between2 and 1

K – Pos. 3, 4, 1, 2stop between3 and 2

N – Pos. 4, 1, 2, 3stop between3 and 4

Y – Pos. 9, 12, 3, 6o’clock. No.stop.

Z – Pos. 9, 12, 3, 6o’clock. Stopbetween 6 and9

CAM CODE SELECTION CHART *‘‘X’’ — Circuit Closure‘‘O’’ — Circuit Open

Number of Positions: 2-Positions 3-Positions 4-PositionsTurn Cam: Configuration: B J G G G R L K G A R L

Orientation: 3 1 1 3 1 1 1 4 1 1 1 1Push Cam Code: YA TC BB FB TB FB MA ED MC MD BC VBDevice Positions: 1 2 1 2 1 2 1 2 1 2 1 2 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 4 1 2 3 4Contact1,2

block Terminal Condition

PTCC 1-2 Free O X X O O X X X O X X X X O O X X O O X X X O O X X X X X O O ODepress O O O O O X X O O X O X X O O X X O O O X O O O O X X X O O O O

3-4 Free O O O O X O O O X O O O O O O O O O X O O O O X O O O O O O O ODepress X X X X X O O X X O X O O O X O O X X O O O X X X O O O X O O O

5-6 Free X O X O X X O X X X X X O O X O O X X X O O X X X X X X O O X ODepress O O X O X O O X O O X O O O X O O X X O O O X O X X O X O O O O

7-8 Free O X O O O O X O O O O O O O O O O O O O X X O O O O O O O O O ODepress O X O X O X X O X X O X X O O X O O O O X X O O O O X O O O X O

4-Plunger Adapter Kit3

PTCA For circuits below — Use 4 plunger adapter kit and at least 1 block from above

PTCC 1-2 Free — O X X O — X O X X O X O O X X X O X X X O X X X X O X O ODepress — O O O O — O O O O O X O O X X O O O X O O X O X X O O O O

3-4 Free X O O O O X — O X O O — — O X O O O O O O O O O O O ODepress X X X X X X — X X X X — — O X O O O X O X O O O X O O

5-6 Free X X O X — X O X X — — X O O X X X O O X X X X X O O O XDepress O O O X — O O X O — — X O O O X O O O X X X X O O O O O

7-8 Free O O O O — O X O O — O O O O O O — O X O O O O O O O O ODepress X O X O — X X O X — O X O O X O — X X O O O O X O O O X

Notes:1 Order contact blocks separately from page 4.

Only PTCC contact blocks are charted. Allother contact block alternatives may be sub-stituted for portions of PTCC circuitry.

2 Contact block PTCB, with its location arrowaligned with the operator, provides the circui-try equivalent to 1-2 and 7-8 of the PTCCblock. When PTCB is reversed (turned 180°),so location arrows do not align with operator,the circuitry obtained is equivalent to 3-4 and5-6 of the PTCC block. PTCD with arrowsaligned, provides same circuit as 7-8 of PTCCblock.

When reversed (arrows not aligned), the cir-cuit obtained is equivalent to 3-4 of PTCCblock. PTCE with arrows aligned, providessame circuit as 1-2 of PTCC block. When re-versed (arrows not aligned), the circuit ob-tained is equivalent to 5-6 of PTCC block.

3 PTCA is explained on page 5.4 Use up to 4 contact blocks with maintained

forms and up to 2 with spring return forms.


Multi-Light Oiltight Controls CMC SeriesSelector-Push Units


COVER PLATE LEGEND OPERATOR BLOCKSINSERTS PLATEF F F J

COMPLETEUNIT

A

OperatorFunction

A –MaintainedB –Clockwise

spring returnfrom left (2 and3 pos)

C–Counterclock-wise springreturn from right(2 and 3 pos)

D–Clockwise andcounterclock-wise springreturn to centerfrom left andright (3 pos)

F –Uni-rotationalclockwise (4pos. only, nostop)

01

Lamp Terminalsand Service

67 –Unlighted 5 Term. 8 Term.4 Terminal 01 51

95 –(2) 120 V transformersand (2) No. 755 lamps inquadrants A & B only.

96 –(2) 120 V transformersand (2) No. 755 lamps inquadrants C & D only.

97 –(2) line voltage jumpersin quadrants A & B. Nolamps.

98 –(2) line voltage jumpersin quadrants C & D. Nolamps.

Line voltage jumper versionscan use incandescent or LEDlamps.

(4) 120 V trans.and(4) No. 755lamps

02 52(4) 240 V trans.and(4) No. 755lamps

05 50(4) 24 Vresistors. (4)No. 756 lamps

40 90(4) 48 Vresistors. (4)No. 1819 lamps

03 53(4) line voltagejumpers. Nolamps.

LED Lamp Terminalsand Service

4 Terminal 5 Term. 8 Term.38 –(2) 120 V transformers in

quadrants A & B97 –(2) line voltage jumpers

in quadrants A & B. NoLED.

98 –(2) line voltage jumpersin quadrants C & D. NoLED.

Order LEDs, color inserts andcovers from pages 14-15.

15 55(4) 120V transf.

16 56(4) 240 V transf.

03 53(4) line voltagejumpers. NoLED.

1

TurnCamOrientation

Insert the camorientation code fromthe shaded area of thechart on the facingpage.

BB

Push Cam CodeInsert the push camcode from the shadedarea of the chart on thefacing page.

X

Order cover plates, colorinserts, and legendplates separately frompage 12.

*This chart lists only a few of the unlimited numberof the switch versions available. Contact yournearest MICRO SWITCH Branch Office or Autho-rized Distributor for those not shown.

Definition:Spring return is the direction the knob is turned bythe internal spring force when the operator releas-es the knob. For example, on a two position clock-wise spring return device, the knob is turned fromposition 2 to position 1 by the operator. When theoperator releases the knob, it spring returns to po-sition 2 in a clockwise direction.

DEVICE POSITIONS

QUADRANT AREAS

V V V


Multi-Light Oiltight Controls CMC SeriesSelector Units


V V

CMC SELECTORS1 Suitable for use in NEMA 13 enclosures.1 Accepts 4 plunger adapter kit

Example:910 A E

Operator

910 —Grey knob913 —Black knob

Cam

Insert cam code from chart below.

1. Match your circuit requirements in onecam code column in the chart below.*

2. Develop the catalog listing of the unit,including the shaded letters of the camcode configuration selected in step 1from the chart below.

3. Consider position number1as the fur-thest counter-clockwise device position.Order contact block(s) and adapter kit asindicated in the left hand column of thecam code selection chart.

Selector Action

2 Positions 3 Positions 4 Positions

A —Pos. 1, 2E —Pos. 2, 3H —Pos. 3, 4L —Pos. 4, 1

U —Pos. 9, 12o’clock

V —Pos. 12, 3o’clock

W —Pos. 3, 6o’clock

X —Pos. 6, 9o’clock

B —Pos. 1, 2, 3F —Pos. 2, 3, 4J —Pos. 3, 4, 1M —Pos. 4, 1, 2

P —Pos. 9, 12,3 o’clock

R —Pos. 12, 3,6 o’clock

S —Pos. 3, 6,9 o’clock

T —Pos. 6, 9,12 o’clock

C —Pos. 1, 2, 3, 4no stop

D —Pos. 1, 2, 3, 4stop between1 and 4

G —Pos. 2, 3, 4, 1stop between2 and 1

K —Pos. 3, 4, 1, 2stop between3 and 2

N —Pos. 4, 1, 2, 3stop between3 and 4

Y —Pos. 9, 12, 3, 6o’clock. No.stop.

Z —Pos. 9, 12, 3, 6o’clock. Stopbetween 6 and9

CAM CODE SELECTION CHART *‘‘X’’ — Circuit Closure‘‘O’’ — Circuit Open

2-Pos. 3-Position 4-Position

Cam: E E5 D G F H H A F G

Turn Cam: Orientation: 1 2 1 3 1 4 1 2 2 1

Device Positions: 1 2 1 2 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4Contact1

Block Terminals

PTCC 1-2 (NC) X O O X X O O X X O O X O O X O X O O O O O X X X O X O O X X X3-4 (NO) O X X O O O X O O X X O O O O X O X O O O X O O O O O X X O O O5-6 (NC) X O O X O O X O X X O X O O O O O O X O X X O O X O X O X X O X7-8 (NO) O X X O X O O X O O O O X X O O O O O X O O O X O X O O O O X O

PTCB

1-2 (NC) X O O X X O O X X O O X O O X O X O O O O O X X X O X O O X X X3-4 (NO) O X X O X O O X O O O O X X O O O O O X O O O X O X O O O O X O

Rev. PTCB

3-4 (NO) O X X O O O X O O X X O O O O X O X O O O X O O O O O X X O O O1-2 (NC) X O O X O O X O X X O X O O O O O O X O X X O O X O X O X X O X

4-PlungerAdapter Kit PTCA2 For circuits below — Use 4 plunger adapter kit and at least 1 block from above

PTCC 1-2 (NC) O X O X X X X O X X O O X O X O X X O X X3-4 (NO) O O O O O O O X O O O X O X O O O O X O O5-6 (NC) O O O X O X X O X O X X O O X O X X X X O7-8 (NO) O X O O X O O O O X O O O O O X O O O O X

PTCB

1-2 (NC) O X O X X X X O X X O O X O X O X X O X X3-4 (NO) O X O O X O O O O X O O O O O X O O O O X

PTCBRev.

3-4 (NO) O O O O X O O O X O X O O O O X O O1-2 (NC) X O X X O X O X X O O X O X X X X O

Notes:1 Order contact blocks separately from page 4.

Alternative contact blocks are shownalso. When alternative contact blocks areused, their sequencing is the same as theirportion of contact block PTCC.

2 Adapter kit PTCA requires contact blocksboth before and after the adapter spacer. Upto two blocks may be added both before andafter the adapter. PTCA is explained on page5.

3 Contact block PTCB may be mounted with itslocation arrow and that of the operator

aligned or reversed; i.e., the block may beturned 180° so location arrows do not match.

4 Use up to 4 contact blocks with maintainedforms and up to 2 with spring return forms.

5 For use with 2 position clockwise spring re-turn selector only.


Multi-Light Oiltight Controls CMC SeriesSelector Units


COVER PLATE LEGEND OPERATOR BLOCKSINSERTS PLATEF F F J

COMPLETEUNIT

A

Operator3,4

Function

A –MaintainedB –Clockwise

spring returnfrom left (2 and3 pos)

C–Counterclock-wise springreturn from right(2 and 3 pos)

D–Clockwise andcounterclock-wise springreturn to centerfrom left andright (3 pos)

F –Uni-rotationalclockwise (4pos. only, nostop)

01

Lamp Terminalsand Service

67 –Unlighted 5 Term. 8 Term.4 Terminal 01 51

95 –(2) 120 V transformersand (2) No. 755 lamps inquadrants A & B only.

96 –(2) 120 V transformersand (2) No. 755 lamps inquadrants C & D only.

97 –(2) line voltage jumpersin quadrants A & B. Nolamps.

98 –(2) line voltage jumpersin quadrants C & D. Nolamps.

Line voltage jumper versionscan use incandescent or LEDlamps.

(4) 120 V trans.and(4) No. 755lamps

02 52(4) 240 V trans.and(4) No. 755lamps

05 50(4) 24 Vresistors.(4)No. 756 lamps

40 90(4) 48 Vresistors.(4)No. 1819 lamps

03 53(4) line voltagejumpers. Nolamps.

LED Lamp Terminalsand Service

4 Terminal 5 Term. 8 Term.38 –(2) 120 V transformers in

quadrants A & B97 –(2) line voltage jumpers

in quadrants A & B. NoLED.

98 –(2) line voltage jumpersin quadrants C & D. NoLED.

Order LEDs, color inserts andcovers from pages 14-15.

15 55(4) 120V transf.

16 56(4) 240 V transf.

03 53(4) line voltagejumpers. NoLED.

1

Cam OrientationInsert the cam orientation code from theshaded area of the chart on the facing page.The area is labeled orientation and it must befrom the same column as the cam.

X

Order cover plates, color inserts, and legendplates separately from page 12.

* This chart lists only a few of the unlimited numberof switch versions available. Contact your nearestMICRO SWITCH Branch Office or Authorized Dis-tributor for those not shown.

Definition:Spring return is the direction the knob is turned bythe internal spring force when the operator releas-es the knob. For example, on a two position clock-wise spring return device, the knob is turned fromposition 2 to position 1 by the operator. When theoperator releases the knob, it spring returns to po-sition 2 in a clockwise direction.

DEVICE POSITIONS

QUADRANT AREAS

V V


Multi-Light Oiltight Controls CMC SeriesLegend Plate Order Sheet



Multi-Light Oiltight Controls CMC SeriesLegend Plates


Three type sizes are offered in eitherblack or white lettering for custom leg-ends on blank legend plates. A guide tolegend area character counting is shownin the chart below. Stay within the limitsspelled out in the chart for number of linesand characters.

To order custom legend plates, Form62098 is provided on page 22. See exam-ple of a completed form on page 17.

CATALOG LISTINGS

Operator-Indicator Indicator

907 AUS 907 BUS

LEGEND STYLE AND SIZES

Sizes available in full capital alphabetic and numeric characters are:

9/64 13/64 5/16.141N .203N .313N3,57mm 5,16mm 7.94mmCharacters available are:A B C D E F G H I J K L M N O P Q R S T U V W X Y Z. , ’ # / ( ) + – ’’ % &0 1 2 3 4 5 6 7 8 91⁄2 1⁄4 3⁄4 1⁄3 2⁄3Additional characters available only in .141 (3,57) and .203 (5,16) sizes are:# * — ° → ∞ ‘‘ ’’ 1⁄8 3⁄8 5⁄8 7⁄8I II III IV V VI VII VIII IX XNa Cl H2O O2

CUSTOM LEGEND AREAS

Max. No.Form of Max. No. Max. Total

Number Characters of Lines Caractersin Per Line of Each Per

Shaded Letter (Include Shaded ShadedArea Height Spaces) Area Area

1 9⁄64 19 7 13313⁄64 13 6 785⁄16 8 4 32

2 9⁄64 19 3 5713⁄64 13 3 395⁄16 8 2 16

3 9⁄64 9 3 2713⁄64 6 3 185⁄16 3 2 6

4 9⁄64 19 2* 3813⁄64 13 2* 265⁄16 8 1 8

5 9⁄64 12 1 1213⁄64 8 1 85⁄16 5 1 5

6 9⁄64 9 2* 1813⁄64 6 2* 125⁄16 3 1 3

7 9⁄64 9 1 9

7 2 1413⁄16 6 1 6

Indicators 4 2 8Only

5⁄16 4 1 4Indicators

Only

8 9⁄64 7 1 7

5 2 1013⁄64 4 1 4

The shaded areas shown below indicate the selections available for divi-sion of the legend display area. After determining the form number, readthe letter size, maximum number of characters and lines from the chart onthe left.

INDICATORS 907 AUS

OPERATOR-INDICATORS 907 BUS

INDICATORS OPERATOR-INDICATORS907 AUS 907 BUS

DIAGONALLEGEND PLATES

NOTE: 2 LINE LEGENDS ARE 2 LETTERS SHORTERPER LINE THAN SINGLE LINE LEGENDS

*Legend plate areas 4 and 6 will accept a third line. Maximum number of characters is 5 for9⁄64N and 3 for 13⁄64N where marked.


Multi-Light Oiltight Controls CMC SeriesLegend Order Sheet


Completed Sample


Multi-Light Oiltight Controls CMC SeriesSpecification Sheet


Custom circuit control for selector and se-lector-push units

For assistance in determining your circuitrequirements for selector and selector-push units, fill out a CMC SpecificationSheet (shown here) and submit it to theMICRO SWITCH Application Center, orFax to (815) 235-6545. Your circuit re-quirements will be analyzed, and the formwill be returned to you filled out.

The completed form will include a cataloglisting of the unit that will provide the con-trol you require along with contact blockcatalog listings. The completed form willalso include contact block terminal con-nections for wiring the circuits you spec-ified. Additional forms (FO-62783-B) areavailable on request.

Follow these steps to fill out a Specifica-tion Sheet: (Refer to the example on thispage.)

1. Mark an ‘‘X’’ where a circuit is to beclosed under ‘‘Device Position.’’ Theform may be used for any 2, 3, or 4 po-sition unit. Cross out the unused posi-tion columns.

1.1 For selector-push units, mark an‘‘X’’ where circuit is closed in either (orboth) the FREE and DEPRESS condi-tion in each Device Position.

1.2 For selectors, there is no DEPRESSknob function, and the DEPRESS linesshould be crossed out.

2. Note under ‘‘Circuit’’ if any circuits areto be controlled with electronic dutycontact blocks. Heavy duty contactblocks will be specified unless other-wise noted.

3. Indicate choice of construction de-tails; i.e., 120 or 240 volt transformers,low voltage jumpers, 24 or 48 volt re-sistors. Check whether 4, 5, or 8 termi-nal construction is desired, main-tained or spring return action, andother control specifications, ifapplicable.

NOTE: For 125VDC applications, use linevoltage jumpers with customer supplied ex-ternally mounted dropping resistors. Lampsupply voltage must not exceed 28 volts.


Multi-Light Oiltight Controls CMC SeriesSpecification Sheet



Multi-Light Oiltight Controls CMC SeriesCover Plates, Color Inserts, and Legend Plates


FAST ASSEMBLY LEGEND DISPLAYThe four selected color inserts snap intothe legend plate. This sub-assembly thensnaps into the cover plate to complete thefront-of-panel assembly.

FOR INDICATORS

COVER PLATE

LEGEND PLATE

COLOR INSERTS

FOR OPERATORINDICATORS

COVER PLATE

LEGEND PLATE

COLOR INSERTS

COVER PLATES AND COLORINSERTSCover plates and color inserts are offeredtogether in one package under a singlecatalog listing. The four color inserts canbe positioned in any of the four quarters ofthe total display area.

Any color combination you desire is in-cluded in this chart. The chart is arrangedin the following order: 4 same colors, 3 F1 colors, 2 F 2 colors, 2 F 1 F 1 colors,and 1 F 1 F 1 F 1 colors.

The cover plates listed in the tables have agray painted edge. Plates with edges oth-er than gray may be ordered by substitut-ing any of the following four digits in placeof the first four digits in the tables. Exam-ple: 906A — gray edge or 906E — blackedge. Listings are completed from thenext page.

Edge Operator-Color Indicator Indicator

Gray 906A 906BChrome 906C 906DBlack 906E 906FUnpainted 906G 906HRed 906J 906KWhite 906N 906P

CMC LEGEND PLATESLegend plates are transparent plasticparts on which word messages are dis-played.

BLANK PLATESBlank legend plates are available for cus-tomers preferring to do their own hotstamping, etching, engraving, or silkscreening of legend plates. Drafting my-lar or film positives can also be positionedon the legend plate for custom panel ap-pearance.

LEGENDEDLegend plates are offered with letteringpositioned horizontally, vertically, or diag-onally — in combinations of black andwhite lettering — in combinations of threedifferent type sizes — and the messagethe customer specifies. (See charactercount chart, page 16.) These plates areordered on Custom Legend Form onpage 22.

See completed sample page 17.

LEGEND CONTRASTFor maximum visibility in both the lightedand unlighted condition, the chart belowis recommended as a guide.

ColorLegend LetteringSnap in

Inserts White Black

Amber X X

Blue X

Green X

Red X

White X

Yellow X

BLANK LEGEND PLATES

INDICATOR OPERATOR

907AYY100 907BYY100

LEGENDED PLATES

907AUS 907BUS


Multi-Light Oiltight Controls CMC SeriesGray Cover Plate and Color Insert Color Guide / Incandescent Lamps


COLOR CODE: A—Amber B—Blue G—Green R—Red W—White Y—Yellow K—BlackCover Plate & Color Cover Plate & Color Cover Plate & Color Cover Plate & ColorInserts For Indicator Inserts For Operator Inserts For Indicator Inserts For Operator

Units Only Color Code Indicator Units Units Only Color Code Indicator Units

906 AAF AAAA 906 BAF906 AAD BBBB 906 BAD906 AAC GGGG 906 BAC906 AAA RRRR 906 BAA906 AAE WWWW 906 BAE

906 AAB YYYY 906 BAB906 AEH AAAB 906 BEH906 AEK AAAG 906 BEK906 AEJ AAAR 906 BEJ906 AED AAAW 906 BED

906 AFG AAAY 906 BFG906 AFD BBBA 906 BFD906 AFC BBBG 906 BFC906 AFA BBBR 906 BFA906 AEE BBBW 906 BEE

906 AFB BBBY 906 BFB906 AEZ GGGA 906 BEZ906 AEX GGGB 906 BEX906 AEG GGGR 906 BEG906 AEY GGGW 906 BEY

906 AEW GGGY 906 BEW906 AER RRRA 906 BER906 AEP RRRB 906 BEP906 AEO RRRG 906 BEO906 AEC RRRW 906 BEC

906 AEN RRRY 906 BEN906 AEM WWWA 906 BEM906 AEF WWWB 906 BEF906 AEA WWWG 906 BEA906 AEL WWWR 906 BEL

906 AEB WWWY 906 BEB906 AFE YYYA 906 BFE906 AEU YYYB 906 BEU906 AET YYYG 906 BET906 AES YYYR 906 BES

906 AEV YYYW 906 BEV906 ABN AABB 906 BBN906 ABM AAGG 906 BBM906 ABL AARR 906 BBL906 ABP AAWW 906 BBP

906 AJF AAKK 906 BJF906 ABQ AAYY 906 BBQ906 ABH BBGG 906 BBH906 ABC BBRR 906 BBC906 ABK BBWW 906 BBK

906 AJD BBKK 906 BJD906 ABF BBYY 906 BBF906 ABB GGRR 906 BBB906 ABJ GGWW 906 BBJ906 AJC GGKK 906 BJC

906 ABE GGYY 906 BBE906 ABD RRWW 906 BBD906 AJA RRKK 906 BJA906 ABA RRYY 906 BBA906 AJE WWKK 906 BJE

906 ABG WWYY 906 BBG906 AJB YYKK 906 BJB906 AGZ AABG 906 BGZ906 AGX AABR 906 BGX906 AGY AABW 906 BGY

906 AHL AABY 906 BHL906 ADG AAGR 906 BDG906 ADW AAGW 906 BDW906 AHK AAGY 906 BHK906 ADX AARW 906 BDX

906 AHJ AARY 906 BHJ906 AHM AAWY 906 BHM906 AGV BBAG 906 BGV906 AGS BBAR 906 BGS906 AGW BBAW 906 BGW

906 AHF BBAY 906 BHF906 AGR BBGR 906 BGR906 AGU BBGW 906 BGU906 ADS BBGY 906 BDS906 ADR BBRW 906 BDR906 AGP BBRY 906 BGP

906 AGT BBWY 906 BGT906 AGN GGAB 906 BGN906 ADU GGAR 906 BDU906 AGO GGAW 906 BGO906 AHG GGAY 906 BHG

906 AGK GGBR 906 BGK906 ADV GGBW 906 BDV906 AGL GGBY 906 BGL906 ADT GGRW 906 BDT906 ADN GGRY 906 BDN

906 AGM GGWY 906 BGM906 AGE RRAB 906 BGE906 AGC RRAG 906 BGC906 AGF RRAW 906 BGF906 AHH RRAY 906 BHH

906 ADL RRBG 906 BDL906 AGD RRBW 906 BGD906 ADZ RRBY 906 BDZ906 AGB RRGW 906 BGB906 ADO RRGY 906 BDO

906 AGA RRWY 906 BGA906 ADY WWAB 906 BDY906 ADH WWAG 906 BDH906 ADF WWAR 906 BDF906 AHE WWAY 906 BHE

906 ADK WWBG 906 BDK906 ADM WWBR 906 BDM906 ADE WWBY 906 BDE906 ADB WWGR 906 BDB906 ADD WWGY 906 BDD

906 ADA WWRY 906 BDA906 AHC YYAB 906 BHC906 AHB YYAG 906 BHB906 AHA YYAR 906 BHA906 AHD YYAW 906 BHD

906 ADP YYBG 906 BDP906 ADJ YYBR 906 BDJ906 AGJ YYBW 906 BGJ906 ADC YYGR 906 BDC906 AGH YYGW 906 BGH

906 AGG YYRW 906 BGG906 AKF KKYG 906 BKF906 AKG KKYB 906 BKG906 AKH KKYW 906 BKH906 AKJ KKYA 906 BKJ

906 AKK KKGB 906 BKK906 AKL KKGW 906 BKL906 AKM KKGA 906 BKM906 AKN KKBW 906 BKN906 AKP KKBA 906 BKP

906 AKR KKWA 906 BKR906 AKA KKRY 906 BKA906 AKB KKRG 906 BKB906 AKC KKRB 906 BKC906 AKD KKRW 906 BKD

906 AKE KKRA 906 BKE906 ACF ABGR 906 BCF906 ACJ ABGW 906 BCJ906 ACN ABGY 906 BCN906 ACH ABRW 906 BCH

906 ACL ABRY 906 BCL906 ACP ABWY 906 BCP906 ACG AGRW 906 BCG906 ACK AGRY 906 BCK906 ACO AGWY 906 BCO

906 ACM ARWY 906 BCM906 ACD BGRW 906 BCD906 ACA BGRY 906 BCA906 ACE BGWY 906 BCE906 ACC BRWY 906 BCC906 ACB GRWY 906 BCB

Additional variations with black inserts are available.


Multi-Light Oiltight Controls CMC SeriesLED Cover Plates and Color Inserts


Cover plates, LEDs, and color inserts areoffered together in one package under asingle catalog listing. The four color in-serts can be positioned in any of the fourquarters of the total display area.

The cover plates listed in the tables have agray painted edge. Plates with edges oth-er than gray may be ordered by substitut-ing any of the adjacent four digits in placeof the first four digits in the tables. Exam-ple: 905A — gray edge or 905E — blackedge.



6 VAC/VDC LEDs, GRAY COVER PLATE AND COLOR INSERT ORDER GUIDECOLOR CODE: G—Green R—Red W—White Y—Yellow K—Black

Cover Plate & Color Cover Plate & Color Cover Plate & Color Cover Plate & ColorInserts For Indicator Inserts For Operator Inserts For Indicator Inserts For Operator


905 AAA1 RRRR 905 BAA1905 AAB1 YYYY 905 BAB1905 AAC1 GGGG 905 BAC1905 ABA1 RRYY 905 BBA1905 ABB1 RRGG 905 BBB1905 ABD1 RRWW 905 BBO1905 ABE1 YYGG 905 BBE1905 ABG1 YYWW 905 BBG1905 ABJ1 GGWW 905 BBJ1905 ACB1 RGYW 905 BCB1905 ADA1 RYWW 905 BDA1905 ADB1 RGWW 905 BDB1905 ADC1 RYYG 905 BDC1905 ADD1 YGWW 905 BDD1905 ADN1 RYGG 905 BDN1905 ADO1 RRYG 905 BDO1905 ADT1 RGGW 905 BDT1905 AEA1 GWWW 905 BEA1905 AEB1 YWWW 905 BEB1905 AEC1 RRRW 905 BEC1905 AEG1 RGGG 905 BEG1905 AEL1 RWWW 905 BEL1905 AEN1 YRRR 905 BEN1905 AEO1 GRRR 905 BEO1905 AES1 RYYY 905 BES1905 AET1 GYYY 905 BET1905 AEV1 YYYW 905 BEV1905 AEW1 YGGG 905 BEW1905 AEY1 GGGW 905 BEY1905 AFK1 GGGK 905 BFK1905 AFL1 RKKK 905 BFL1905 AGA1 RRYW 905 BGA1905 AGB1 RRGW 905 BGB1905 AGG1 RYYW 905 BGG1905 AGH1 GYYW 905 BGH1905 AGM1 YGGW 905 BGM1905 AHN1 YYGK 905 BHN1905 AHO1 YGGK 905 BHO1905 AHP1 GGWK 905 BHP1905 AHQ1 RWWK 905 BHQ1905 AHS1 GWWK 905 BHS1905 AHT1 RGGK 905 BHT1905 AHY1 YYWK 905 BHY1

905 AJA1 RRKK 905 BJA1905 AJB1 YYKK 905 BJB1905 AJC1 GGKK 905 BJC1905 AKA1 RYKK 905 BKA1905 AKB1 RGKK 905 BKB1905 AKD1 RKKW 905 BKD1905 AKE1 YGKK 905 BKE1905 AKH1 RKKW 905 BKH1905 AKL1 GKKW 905 BKL1905 ALH1 RGWK 905 BLH1905 ALN1 RGYK 905 BLN1905 ALQ1 YKWW 905 BLQ1

Above listings include gray cover plate, 4 color inserts and one to four6 VAC/DC LEDs for all lighted quadrants. (R,G,Y). Black (K) and White(W) color inserts are normally not lighted so LEDs are not included.


Multi-Light Oiltight Controls CMC SeriesLED Cover Plates and Color Inserts


Cover plates, LEDs, and color inserts areoffered together in one package under asingle catalog listing. The four color in-serts can be positioned in any of the fourquarters of the total display area.

The cover plates listed in the tables have agray painted edge. Plates with edges oth-er than gray may be ordered by substitut-ing any of the adjacent four digits in placeof the first four digits in the tables. Exam-ple: 905A — gray edge or 905E — blackedge.



24 VAC/VDC LEDs, GRAY COVER PLATE AND COLOR INSERT ORDER GUIDECOLOR CODE: G—Green R—Red W—White Y—Yellow K—Black

Cover Plate & Color Cover Plate & Color Cover Plate & Color Cover Plate & ColorInserts For Indicator Inserts For Operator Inserts For Indicator Inserts For Operator


905 AAA2 RRRR 905 BAA2905 AAB2 YYYY 905 BAB2905 AAC2 GGGG 905 BAC2905 ABA2 RRYY 905 BBA2905 ABB2 RRGG 905 BBB2905 ABD2 RRWW 905 BBD2905 ABE2 YYGG 905 BBE2905 ABG2 YYWW 905 BBG2905 ABJ2 GGWW 905 BBJ2905 ACB2 RGYW 905 BCB2905 ADA2 RYWW 905 BDA2905 ADB2 RGWW 905 BDB2905 ADC2 RYYG 905 BDC2905 ADD2 YGWW 905 BDD2905 ADN2 RYGG 905 BDN2905 ADO2 RRYG 905 BDO2905 ADT2 RGGW 905 BDT2905 AEA2 GWWW 905 BEA2905 AEB2 YWWW 905 BEB2905 AEC2 RRRW 905 BEC2905 AEG2 RGGG 905 BEG2905 AEL2 RWWW 905 BEL2905 AEN2 YRRR 905 BEN2905 AEO2 GRRR 905 BEO2905 AES2 RYYY 905 BES2905 AET2 GYYY 905 BET2905 AEV2 YYYW 905 BEV2905 AEW2 YGGG 905 BEW2905 AEY2 GGGW 905 BEY2905 AFK2 GGGK 905 BFK2905 AFL2 RKKK 905 BFL2905 AGA2 RRYW 905 BGA2905 AGB2 RRGW 905 BGB2905 AGG2 RYYW 905 BGG2905 AGH2 GYYW 905 BGH2905 AGM2 YGGW 905 BGM2905 AHN2 YYGK 905 BHN2905 AHO2 YGGK 905 BHO2905 AHP2 GGWK 905 BHP2905 AHQ2 RWWK 905 BHQ2905 AHS2 GWWK 905 BHS2905 AHT2 RGGK 905 BHT2905 AHY2 YYWK 905 BHY2

905 AJA2 RRKK 905 BJA2905 AJB2 YYKK 905 BJB2905 AJC2 GGKK 905 BJC2905 AKA2 RYKK 905 BKA2905 AKB2 RGKK 905 BKB2905 AKD2 RKKW 905 BKD2905 AKE2 YGKK 905 BKE2905 AKH2 RKKW 905 BKH2905 AKL2 GKKW 905 BKL2905 ALH2 RGWK 905 BLH2905 ALN2 RGYK 905 BLN2905 ALQ2 YKWW 905 BLQ2

Above listings include gray cover plate, 4 color inserts and one to four24 VAC/DC LEDs for all lighted quadrants. (R,G,Y). Black (K) andWhite (W) color inserts are normally not lighted so LEDs are not in-cluded.


Multi-Light Oiltight Controls CMC SeriesReplacement Parts


Cover PlatesOperator-

Indicators Color Indicators986 AAB 01 Gray 986 AAB 02986 AAB 03 Black 986 AAB 04986 AAB 05 Unpainted 986 AAB 06986 AAB 09 Red 986 AAB 10986 AAB 13 White 986 AAB 14986 AAB 07 Chrome 986 AAB 08

Bulk Packed Cover Platesfor IndicatorsCover plates for 20 CMCindicators are offered.

Bulk Packed Cover Platesfor Operator-IndicatorsPlates for 40 CMC operator-indicators are offered.

Specify in multiples of 20 Specify in multiples of 40986 AAB 01-BP 986 AAB 02-BP986 AAB 03-BP 986 AAB 04-BP986 AAB 05-BP 986 AAB 06-BP986 AAB 09-BP 986 AAB 10-BP986 AAB 13-BP 986 AAB 14-BP986 AAB 07-BP 986 AAB 08-BP

Individual Color Inserts for IncandescentEach insert covers 1⁄4 of total display — four required perCMC unit.

Operator-Indicators Color Indicators986 AAA 01 Red 986 AAA 02986 AAA 03 Yellow 986 AAA 04986 AAA 05 Green 986 AAA 06986 AAA 07 Blue 986 AAA 08986 AAA 09 White 986 AAA 10986 AAA 11 Amber 986 AAA 12986 AAA 13 Black3 986 AAA 14

Bulk Packed for IndicatorsIndividual color inserts (onecolor) for 5 CMC indicatorsare offered.

Bulk Packed for Operator-IndicatorsColor inserts (one color) for10 CMC operator-indicatorsare offered.

Specify in multiples of 20 Specify in multiples of 40986 AAA---BP 986 AAA---BP

Insert number of color above.

Individual Color Inserts for LEDsOperator-

Indicators Color Indicators985AAA01 Red 985AAA02985AAA03 Yellow 985AAA04985AAA05 Green 985AAA06986AAA09 White2 986AAA10986AAA13 Black3 986AAA14

REPLACEMENT LAMPSIndustry No. CatalogDescription Voltage Listing

755 6 PTZ40756 12 PTZ661819 24 PTZ67LED, Red 6VAC/DC PTZ69LED, Green 6VAC/DC PTZ70LED, Yellow 6VAC/DC PTZ68LED, Red 24VAC/DC PTZ78LED, Green 24VAC/DC PTZ79LED, Yellow 24VAC/DC PTZ71

‘‘O’’ Ring SealFor operator-indicatorsonly

986 BAA 04

Panel SealFor all units

986 BAA 03

Lamp Holder908 909 thru 914

Indicator Operator-Only Indicators

986 BAA 05 986 BAA 06

Lamp Box WithoutLamp Hardware

910 Selector 911 Selector- 908Series Push Series Indicators

986 BAA 24 986 BAA 25 986 BAA 27

Knobs1

Replacement 910 Series 913 SeriesKnob Packet For Gray Knob Black Knob

Selector, Positions 1-2-3-4 986BAA15 986BAA20

Selector, Positions 9-12-3-6 o’clock 986BAA17 986BAA22

Replacement 911 Series 914 SeriesKnob Packet For Gray Knob Black Knob

Selector-push, Position 1-2-3-4 986BAA16 986BAA21

Selector-push, Positions 9-12-3-6 o’clock 986BAA18 986BAA23Notes: 1, Knob packets include knob, shaft, and O-ring seal.

2, White inserts not recommended for illumination by LEDs.3, Black inserts not suitable for illumination.

Voltage ControlFor LampIndividual Units

986 BAA 01

120 VAC transformer

986 BAA 02

240 VAC transformer

986 BAA 07

Low voltage jumper

986 BAA 08

48 volt resistor

986 BAA 14

24V resistor


Multi-Light Oiltight Controls CMC SeriesContact Blocks


1 PTC heavy duty and electronic dutycontact blocks

1 Tandem mounting in any combinationup to four contact blocks per operator.(Two blocks on spring return devices.)

1 Exclusive four plunger adapter kit maybe used with selector and selector-push units for greater circuit flexibility.

HEAVY DUTY UL/CSA ListedHeavy duty contact blocks contain finesilver, butting-type contacts. Terminalsare angled 30° for easy screwdriver ac-cess to terminal screws. Screws containself-lifting pressure plates for easy wiring.Holds bare wires of 12 to 16 gauge, either

singly or two wires of same or adjacentsize. Crimp on spade or ring lugs can beused. Base of contact block has markedpad for pencil identification of the controlfrom back of panel.

TWO CIRCUIT BLOCKS ORDER GUIDE

GoldButting Contacts Silver Plated

Cata- Cata-log log

Description Symbol Listing Listing

1 NC-1 NO PTCB PTCT

1 NO PTCD

1 NC PTCE

1 NO-1 NO PTCF

1 NC-1 NC PTCG

For AC use only. Overlapping PTCJFor use with 909 LONC-pushbuttons. ECNO

For other appli- Sequencing PTCKcations contact ECNO-NOMICRO SWITCH.

LO J late opening EC J early closing

FOUR CIRCUIT BLOCKS ORDER GUIDE

GoldButting Contacts Silver Plated

Cata- Cata-log log

Description Symbol Listing Listing

2NC-2NO PTCC PTCW

1 NC PTCH1 NO

1 NC PTCU1 NO

ELECTRICAL RATINGS

AC Volts DC Volts35% Power Factor Inductive Load

ContinuousCurrent

10 Amps. Carry 120 240 480 600 125 250

Normal InrushCurrent in Amps. 60 30 15 12 — —

Normal BreakCurrent in Amps. 6 3 1.5 1.2 2.2 0.55

ELECTRONIC DUTYElectronic duty contact blocks contain sliding contacts for re-liable operation on electrical loads where thermal cleaning ac-tion is not present. These blocks are offered with silver contactsfor low energy applications or gold contacts for solid state milli-volt and milliamp dry circuits. Terminals are combination .187 x.021 inch quick connect plated for soldering.

SILVER GOLD

Sliding Contacts Silver GoldCata- Cata-log logList- List-

Description Symbol ing ing

4NC-4NO PTCL PTCP

2NC (Left half PTCM PTCR2NO of 2 plunger

version.)

2NC (Right half PTCN PTCS2NO of 2 plunger

version.)

ELECTRICAL RATINGS

Standard DutySliding Silver Contacts

AC Volts DC Volts35% Power Inductive

Factor LoadContinuous Current5 Amps. Carry 120 220 125 250

Normal Inrush Current in Amps. 30 15 — —

Normal Break in Amps. 3 1.5 1.1 .5

Gold Contacts

Maximum Resistive LoadsMaximum Volts in Amps.

28 VDC 1 Amp. Resistive

125 VAC .5 Amp Resistive

Initial contact resistance—.006 ohm average


Multi-Light Oiltight Controls CMC SeriesAccessories


Not all of the accessories listed here areavailable from MICRO SWITCH. Be sureto order from the suggested manufactur-er for each accessory.

COLOR FILTERS FOR LAMPSFor use over type lamps as furnished withCMC transformer units. Projects color in-dicated when used with white color in-serts and high ambient light level lampsshown at right.

LAMP INFORMATION120 VAC and 240 VAC transformer unitsare equipped with four T-3 1/4 #755lamps. The #755 lamp has a 6.3 volt rat-ing and is readily obtainable from all in-dustrial or automotive supply companies.These same units will accommodate the#1847 lamp. Replacement #755 lampscan be ordered as PTZ40.24 volt or 48 volt resistor units are sup-plied with lamps. 48 volt units areequipped with GE #1819 lamps rated at28 volts. 24 volt units are equipped with#756 lamps rated at 14 volts. Replace-ment #756 lamps can be ordered asPTZ66 and #1819 lamps can be orderedat PTZ67.CMC units containing line voltagejumpers are not supplied with lamps.These units are designed for use with any5 through 28 volt lamp listed.

If a lamp other than those listed is used,the lamp must be limited to 1 watt perquadrant.

QUICK CONNECTORSAvailable from suppliers shown (not soldby MICRO SWITCH)

ENCLOSURES FOR CMCNumerous panel manufacturers buildcabinets, panelboards or enclosures foruse with CMC. Your local MICRO SWITCHBranch Office or Authorized Distributorcan assist you with information on localavailability of enclosures.

PANEL PUNCH FOR CMCA 2N (50,8mm) square panel punch(Greenlee Model 731M) for CMC is manu-factured by Greenlee Tool Co., Rockford,Illinois. Use in conjunction with a Green-lee No. 7646 hydraulic punch driver.

Manufacturer Color Lamp Filters

Amber Red GreenAPM, Englewood, N.J. 1813/8 A-2 1813/8 R-4 1813/8 G-1

T–31⁄4 LAMP INFORMATION

Ambient Light Level

HighLamp Current Life Medium 24 FT—CType Voltage Amps (Hrs) 5-25 FT—C and Up

1850 5.0 .09 1,500 X

756 14.0 .08 15,000 X

1819 28.0 .04 2,500 X

1847 6.3 .15 5,000 X

47 6.3 .15 3,000 X

755 6.3 .15 20,000 X

T–31⁄4 LED INFORMATION

LED ColorVoltage

V AC/DCCurrent Amps

(Nominal)Luminous

Intensity (MCD)

White/Yellow 6 .06 75White/Yellow 24 .02 75

Green 6 .06 75Green 24 .02 75

Red 6 .06 85Red 24 .02 85

MCD – Millicandlea

FOR ELECTRONIC DUTY CONTACT BLOCKS(Either silver or gold contacts)

Range of Straight—NoManufacturer Wire Size Insulation Flag

AMP 20-16 42452-1 or 42486-1 or42452-2 42800-1

AMP 18-14 62016-2

HOLE PLUG

Contains Oiltight Seal2.25N (57,2mm) + 2.25N (57,2mm)986CAA01 Gray

SWITCH GUARD

Guard consists of cover plate and trans-parent cover. Switch cannot be operatedwhen cover guard is closed helping pre-vent accidental operation. Guard can beused on 909, 910 and 911 series oper-ators. Extends 1.52 in. (38,5 mm) frompanel.

Catalog Listing 986DAA01


Multi-Light Oiltight Controls CMC SeriesMounting Dimensions


Note: The location arrow on the contactblock must be lined up with the arow onthe operator, except as noted for thePTCB block on the ordering pages.

CMC WEIGHTIndicators and operator-indicators (in-cludes cover plate, legend plate, and col-or inserts). With transformers — 14 oz.max.

Without transformers — 71⁄2 oz. max.Contact blocks — 2 oz. each.4-Plunger Adapter Kit — 1 oz.

INDICATOR

PUSHBUTTON

SELECTOR

SELECTOR-PUSH

PANEL CUTOUT RECOMMENDATIONS

HORIZONTAL MOUNTING VERTICAL MOUNTING HORIZONTAL or VERTICAL5 TERMINAL CONSTRUCTION 5 TERMINAL CONSTRUCTION 8 TERMINAL CONSTRUCTION


Manual Switches PB SeriesPushbutton Switches


FEATURES1 Compact size1 Up to 4-poles1 Sealed versions

TOUCH FEEDBACK SWITCHES

SHORT TRAVEL SWITCHES

PANEL SEALED SWITCHES

ORDER GUIDEMomentary and alternate action switches.

No. of SPDT Circuits2 2 4 4

Button Mom. Alt. Mom. Alt.Color Action Action Action Action

Black 2PB11-T2 82PB19-T2 — 84PB19-T2

2PB732-T2 — 4PB714-T2 —(M8805/23-001) (M8805/23-003)

Red 2PB12-T2 82PB21-T2 — —

2PB717-T2 — 4PB717-T2 —(M8805/23-002) (M8805/23-004)

Green 2PB273-T2 82PB22-T2 — —

ORDER GUIDEMomentary action switches.

Button No. of SPDT CircuitsColor 2 3

Black 2PB7 3PB7

These switches resemble the touch-feed-back design, but have a flexible leaf ac-tuator for lower operating force and short-er button travel.

An elastomer seal is bonded between ac-tuating plunger and button collar. An O-ring seals the button assembly to the pan-el front.

Two-piece design enables button to bemounted separately. After switch unit iswired, it snaps into place from behindpanel.


No. of SPDT CircuitsButton CollarColor Type 1 2

Black Hex 1PB4 2PB4

Black Round 1PB42 —

Red Round 1PB43 2PB43

ELECTRICAL RATINGS(Except 15PB and 700PB)30 VDC: 5 amps, res., sea level or 50,000

ft.; 3 amps, ind., sea level; 2.5 ampsind., 50,000 ft; 24 amps, max. inrush.

UL and CSA rating for basic switches: 5amps, 125 or 250 VAC.

Push

butto

ns




WATERTIGHT SWITCH ORDER GUIDEMomentary action switches.Has knurled chrome-finished facenut.

Button No. of SPDT CircuitsColor 2

Black 2PB901-T2

Facenut-to-panel, button-to-facenut, andbushing-to-facenut, sealing helps pre-vent entry of water from behind panel, upand over bushing wall. Switch units pot-ted in corrosion resistant metal enclo-sure. Meets submergence requirementsof MIL-STD-108 (up to 10 PSI water pres-sure for one hour).

HERMETICALLY SEALEDSWITCHES These pushbuttons are equipped with

HM hermetically sealed switch units,which have metal-to-metal fusion aroundthe cover, actuator base, and mountingholes. Terminals are sealed glass-to-metal.

Vapor-proof construction enables use indamp locations without condensation oncontacts. External parts corrosion resist-ant per MIL-S-8805. Meets explosion-proof requirements of MIL-S-8805.


No. of SPDT Circuits2 4

ButtonColor

Black 702PB1 704PB1

MINIATURE SIZE SWITCHES

1PB5 15PB2


No. of SPDT CircuitsButton 1 2

Steel* 1PB5 —

White Plastic — 15PB2

* Steel button enables use under hinged plates or paddle levers, in addition to manual operation.

ELECTRICAL RATINGS — 700PBand 15PB700PB (With hermetically sealed switchunits):28 VDC and 115 VAC, 400 HZ: 3 amps,ind., 5 amps, res.

15PB:30 VDC and 115 VAC: 2 amps, ind., 5amps. res.; 1.0 amp, lamp load.

1PB5250 VAC: 5 amps.

30 VDC: 5 amps, res., sea level or 50,000ft.; 3 amps, ind., sea level; 2.5 amps ind.,50,000 ft.; 24 amps, max. inrush.





Touch Feedback Switches Panel Sealed Switches

2-Pole 4-Pole

Dim. ‘‘A’’ Mom. 16,8/.66 30,0/1.18(max.) Alt. Act. 17,3/.68 30,5/1.20

Dim. ‘‘B’’ Mom. 26,7/1.05 26,7/1.05

Alt. Act. 33,0/1.34 33,0/1.34

Short Travel Switches

2-Pole 3-Pole

Dim. ‘‘A’’ (max.) 17,0/.67 23,8/.94

1-Pole 2-Pole

Dim. ‘‘A’’ (max.) 11,7/.46 17,0/.67

Key:0,0 J mm

0.00 J inches

Push

butto

ns





Watertight Switch Miniature Size Switches

Hermetically Sealed Switches

Mounting hardware includes:hexnut, lockwasher, andkeying washer.

2-Pole 4-Pole

Dim. ‘‘A’’ (max.) 16,8/.66 30,0/1.18Key:

0,0 J mm

0.00 J inches


Manual Switches Series 2Pushbutton Switches and Indicators


FEATURES1 Easy-to-assemble modules provide

thousands of display/controlcombinations

1 Up to 4 incandescent lamps1 1, 2, 3, or 4-section display1 Transmitted or projected color1 Integral hold-in coil option provides

remote released contacts. Pull-in coils(flange mount only) enable remoteactuation

1 Switch guard accessory.

CHANGE LAMPS OR FILTERSFROM PANEL FRONT

Without tool. Remove display screen/lampholder assembly from 2C200 oper-ator-indicator (or 2F200 indicator). Unit iskeyed to maintain proper orientationwhen replacing. Use only flange baseT-13⁄4 lamps with 2C200 and 2F200 de-vices.

LAMPS AND FILTERSOrder lamps and filters for projected colorfrom page 117.

BARRIER MOUNT

Display screen(page 115)

Housing(next page)

Mounting barrier(next page)

Switch unit(page 114)

Mounting barriers attach to either the longor short sides of the housing. They havespring clips which grip the panel. Mount-ing barriers also separate display screens

to protect against inadvertent operation.Multiple units can be attached together ina strip and snapped into a panel slot; orthey can be mounted individually.

FLANGE MOUNT

Display screen(page 115)

Housing(page 113)

Switchunit(page 114)

Flange mount units have mounting clipsready-attached to the housing. They canbe individually installed or replaced; and

enable use of an overlay panel, if desired.Groupings can be separated by optionalspacing barriers.

MODULES ASSEMBLE EASILYAll modules are ordered as separateitems which snap together for easy as-sembly.

Push

butto

ns


Manual Switches Series 2Pushbuttons Switches and Indicators


Barriers on long sides

Barriers on short sides

BARRIER MOUNT MODULESBarrier mount assemblies are identical inpanel appearance. Operator-indicatorhousings have spring clips for attachingswitch modules. This feature is not pro-vided with indicator housings.

Barriers are necessary for mounting.They can be specified for attachment tothe long or short side of the housing, asstated in the order guides.

BARRIER MOUNT HOUSING ORDER GUIDESee ‘‘Application Data’’ for typical bailing circuits for coil-equipped modules.

Tool Not RequiredBarriersAttach On:

No. ofLamp Sockets Operator-Indicator Indicator Only

Long Sidesof Housing

2 (A & C) 2C2074 (A-D) 2C209

Short Sidesof Housing

2 (A & C) 2C2014 (A-D) 2C203 2F203

MOUNTING BARRIER ORDER GUIDEFor strip mounting, specify one more barrier than the number of units in the group.

Catalog ListingsMounting Barrier For PanelType Thickness Gray Black

Attach toLong Sides .06-.19 in. (1,52-4,83 mm) 2B2 2B4

Attach toShort Sides .06-.19 in. (1,52-4,83 mm) 2B1 2B3

Note: Panels .19 in. (1,52 mm) thick require the .06-.19 in. (1,52-4,83 mm) type barriers.




Flanges on long sides

FLANGE MOUNT MODULESFlange mount assemblies are identical inpanel appearance. Operator-indicatorhousings have spring clips for switchmodules attachment (not provided withindicator housings).

Barriers are not required, since the panelmounting clips are ready-attached toflange sides of the housings. However,spacing barriers can be used for color-coding. They also aid in preventing inad-vertent operation of two screens with onepush.

Mounting dimensions on page 120.

FLANGE MOUNT HOUSING ORDER GUIDESee ‘‘Application Data’’ for typical bailing circuits for coil-equipped modules.

Tool Not Required

Flanges On:No. of Lamp

SocketsOperator-Indicator Indicator Only

Long Sides ofHousing

2 (A & C) 2C2044 (A-D) 2C206 2F206

SPACING BARRIER ORDER GUIDEFor .06-31 in. (1,5-7,9 mm) thick panels.

Catalog ListingsSpacing BarrierType Gray Black

For Long Flange Housing 2B9 2B18

Push

butto

ns




SWITCH MODULESInterchangeable type 2D switch modulesattach to spring clips on the bottom of op-erator-indicator housings. There is a wideselection of circuitry, electrical ratings,operating actions and terminations.

For mounting dimensions, see page 121.

ELECTRICAL RATINGSilver contacts:30 VDC: 5 amps res. sea level or 50,000 ft,

3 amps ind. sea level, 2.5 amps 50,000 ft.Max. inrush, 24 amps.

UL and CSA rating for basic switch: 5amps, 125 or 250 VAC.

Gold contacts:30 VDC: 0.5 amp ind.,1amp res., sea level

and 50,000 ft. Max. inrush, 2 amps.

SM SUBMINIATURE MULTI-SPDT SWITCH MODULES

Momentary action Alternate action

SM switch modules offer a choice of twomomentary action styles, one with a pro-nounced touch-feedback, the other withlow operating force for rapid repeat ac-

tuation. Also available with alternate-action and combination momentary/alternate action modules. Extra lengthturret solder terminals.

SM SWITCH MODULE ORDER GUIDE

Momentary Action Alternate ActionTouch-Feedback Type Low Force TypeNo. of

SPDT Circuits Silver Contacts Silver Contacts

1 2D100 2D1182 2D2 2D264 2D9 2D33

V3 COMPACT SPDT/DPDT SWITCH MODULES

V3 switch modules have screw terminalswith lockwashers. Quick-connect termi-nals (not shown) are also available. Whenused with short-flange operator indica-tors, add spacing barriers to preventinterference.

ELECTRICAL RATING30 VDC: 10 amps ind.* sea level, 6 ampsind.,* 50,000 ft. Motor load, 6 amps.** ULand CSA rating for basic switch: 10 amps,1⁄3 Hp, 125 or 250 VAC; 1⁄2 amp, 125 VDC;1⁄4 amp, 250 VDC.* Inductive currents in accordance with AN3179.** Motor load rating based on starting current.

V3 SWITCH MODULE ORDER GUIDE

No. of SPDTCircuits Momentary Action

1 2D70

2 2D72




ONE-PIECE DISPLAYSCREEN OPTIONS

Single-section

These translucent solid color displayscreens are single-section/one piececonstruction

SINGLE-SECTION/ONE-PIECE SCREENS ORDER GUIDE

Colors Standard

Red 2A1

Yellow 2A2

Green 2A3

White 2A5

THREE-PIECE DISPLAYSCREEN OPTIONS

Single-section

These screens have transparent coloredor colorless caps, transparent colorlesslegend inserts and translucent coloredbases.

SINGLE-SECTION/THREE-PIECESCREENS ORDER GUIDE

ColorlessColor Caps

Red 2A81

Yellow 2A82

Green 2A85

White 2A70

Amber 2A114

NOTE:Add –L to catalog listing if button is to belegended.

Silicone rubber baffles prevent light spillagefrom one section to another. Screen caps andlegend inserts are transparent colorless. Basesare translucent colored.

For more information on 2, 3, and 4-section dis-play screens, contact the MICRO SWITCH Ap-plication Center.

Push

butto

ns







LEGEND INFORMATIONHoneywell MICRO SWITCH Division pro-vides legend service on the inserts sup-plied with three-piece screens only. Tospecify your needs, add -L to the cataloglistings (example: 2A81-L) and use Leg-end Order Sheet (Form FO-62308),shown on facing page. Reproduce it onyour office copier.

On any one insert, only one size of type isprovided in either black or white. After leg-ending, the insert is assembled to the dis-play screen. The type face used is ‘‘Mod-ified Gothic’’.

LAMPST-13⁄4 incandescent lamps are availablefrom MICRO SWITCH in 28 volt versions.

Use of neon lamps is not recommended.Light output is approximately 30% of anincandescent lamp. Also, a neon lampwill not illuminate blue or green filters ordisplay screens due to the absence ofthese colors from the neon light spec-trum.

LAMP POLICYThe 28 volt lamps are offered as a conve-nience to customers. Honeywell MICROSWITCH Division does not extend anywarranty as to such lamps, and cannotguarantee to provide lamps from specificmanufacturers. Any technical or qualityquestions regarding such lamps shouldbe directed to the lamp manufacturer.

COLOR FILTERS FOR PROJECTEDCOLORProjected color is achieved by usingwhite buttons and color filters over clearlamps. When lamps are lighted, whitebutton takes on color projected by the fil-ters.

Filters used with type 2C200 and 2F200housings (no-tool relamping) slip overlamp sockets in lampholder.

MIL-S-22885 ASSEMBLED DEVICESPushbutton switches and indicators canbe ordered as assembled devices from asingle MIL-S-22885 part number. Desig-nated Series 2W, they are available forflange mounting and have the no-tool re-lamping feature. For ordering informa-tion, refer to MICRO SWITCH Catalog 80.

SCREEN/LEGEND COLORSThe chart below shows recommendeddisplay screen and legend color combi-nations for optimum legibility.

Legend Lettering

ScreenColor Black White

Red x

Green x

Yellow x

Amber x x

White x

LAMP ORDER GUIDE

Rating Life/Voltage†

Catalog Base Type Life in ExpectedListing Style No. Volts Amps Hours Volts Life (Hrs.)

2E1 Flange 327 28 .040 1000 24.0 7,50026.0 2,80030.0 400

† These are experimental continuous life test results supplied by a lamp manufacturer for reference only. In-termittent operation may reduce these figures as much as 50%. Ratings are based on median values of cur-rent and life.

Wattage should not exceed 2.4 watts (2 lamps) per switch, for continuous illumination.

FILTER ORDER GUIDE

Filter Style Red Green Amber White*

For Type 2C200 and 2G12 2G14 2G16 2G172F200 Housings

* Has blue tint to compensate for high yellow content of incandescent lamps at low voltages. Push

butto

ns




SWITCH GUARD ACCESSORYA hinged cover on the switch guard helpsavoid inadvertent operation of the displayscreen. It is installed in place of the trans-parent slide-on cap furnished with three-piece screen. Note: When used with pull-in coil devices, specify the 2C200 oper-ator-indicator housings which have theno-tool relamping feature.

Barrier mount assembly with guard in-stalled. (Can also be used with all flangemount units.)

Guard requires a ‘‘lift-to-push’’ responseto operate switch normally.

Order Catalog Listing 2H20

Key:0,0 = mm

0.00 = inches





Long barrier operator-indicators Short barrier operator-indicators

Short barrier indicators Long barrier indicators Mounting barriers

Short Long

0,0 = mmKey:

0.00 = inches.

A Panel Thickness

1,5/.06 1,5-4,81/.06-.194,6/.18 4,8-7,9/.19-.31

Length Of Panel Cutout*

Number of UnitsType of Indicator orOperator-Indicator 1 2 3 4 5 6 7

Short mm 36,09 68,00 99,87 131,72 163,60 195,48 227,36

Barrier in. 1.421 2.677 3.932 5.186 6.441 7.696 8.951

Long mm 30,00 55,78 81,58 106,34 133,12 159,90 184,68

Barrier in. 1.181 2.196 3.212 4.226 5.241 6.256 7.271

*Nominal dimensions, ±0,25 mm/0.10 in. (In 5% ofthe cases, the cutout will be undersized for the build-up of assembled units and will require enlargement.

Push

butto

ns





Long flangeoperator-indicators

Long flange indicators Spacing barriers

Short Long

0,0 = mmKey: 0.00 = inches.

Length Of Panel Cutout*Add 4,19 mm/.165 in. to length for each optional spacing barrier used.

Number of UnitsType of Indicator orOperator-Indicator 1 2 3 4 5 6 7

Long mm 27,94 55,75 83,57 111,36 139,17 166,98 194,77

Flange in. 1.1 2.195 3.290 4.384 5.479 6.574 7.668

*Nominal dimensions, ±0,25 mm/0.10 in. (In 5% ofthe cases, the cutout will be undersized for the build-up of assembled units and will require enlargement.




MOUNTING DIMENSIONS (For reference only)SM Switch Modules

V3 Switch Modules

Push

butto

ns


Manual Switches DM SeriesPushbutton Switches


FEATURES1 Attractive, rugged snap-in panel

mount design — easy installation.1 Snap-on or integral pushbuttons.1 Choice of momentary, alternate,

push-pull and pull-to-cheat operation.1 Quick-connect terminals.1 Expected mechanical life: 1 million

operations, 95% survival.1 Temperature range:

–35° to +180°F (–37° to 82°C)1 UL recognized, (E12252) CSA

certified (LR4442).

Three different styles of snap-on buttonscan be used with the DM switches shownabove. There is a choice of momentary oralternate-action, and single or double-pole circuitry.

ELECTRICAL RATINGUL and CSA rating: 10 amps, 1/2 Hp, 125,250 or 277 VAC.

SWITCHES WITH SNAP-ON BUTTONS

With button ‘‘A’’ With button ‘‘B’’

SPDT DPDT

SWITCH ORDER GUIDESwitches have gray faceplates. Buttonsare not included.

MomentaryCircuitry Action

SPDT 3DM1

DPDT 4DM1

Order buttons separately or ready-installed on switches from the order guidebelow.

SPDT

DPDT

SWITCH/BUTTON ORDER GUIDESwitches have gray faceplates.

Momentary Action Alternate ActionButtonStyle

ButtonColor

ButtonOnly

3DM1 (SPDT)and Button

4DM1 (DPDT)and Button

2003DM1 (SPDT)and Button

A

Black 31PA1 13DM1-A1 14DM1-A1

Red 13DM1-A2 14DM1-A2

B

Black 31PA3 13DM1-B1 14DM1-B1

Red 31PA4 13DM1-B2 — 2013DM1-B2




Bezel on all sides Barriers on short sides Barriers on long sides

Barrier on one short side Barriers on one long side

FEATURES1 Provides distinctive color display

whether lighted or unlighted.1 Convenient front panel mounting and

relamping, without tools.1 Matching indicators.1 Locked button option discourages

tampering.1 Choice of transmitted color, projected

color, or dead front display.1 UL recognized, CSA certified.

MOUNTINGSnap-in mounting. Switch or indicator iseasily inserted into the cutout. Mountingclips grip the panel. No tools are needed.

Housings with a full bezel can be frontpanel or sub-panel mounted, individuallyor in strips.Barrier type housings are normallymounted top-of-panel in strips, but can al-so be individually mounted. Barriers canbe on either the short or long housingsides.The drawing shows how housings with abarrier on one side are used in a strip oftwo or more units. The first has a barrieron two sides, while all other units have abarrier on one side, and butt against eachother.

Barriers on Barriers onboth sides. one side.

Incandescent HousingButton Lamp

RELAMPING

1. Lamps and legends can be changedfrom panel front. When button is re-moved, lamp is extracted from itssocket and retained in button.

2. Ease of lamp replacement. After the in-operative lamp is automatically re-moved with the button, the new lamp isinserted without the use of tools.

ELECTRICAL RATINGS5-amp silver contacts —

5 amps res., 3 amps ind., 30 VDC.UL code L-4: 5 amps, 250 VAC

10-amp silver contacts —UL code L-285; 10 amps, 1⁄6 Hp, 125or 250 VAC.

Gold contacts —1 amp res., 0.5 amp, ind., 30 VDCUL code L-22: 1 amp, 125 VAC

Gold alloy contacts —0.1 amp, res., 30 VDC;1 amp, 125 VAC.

LOCKED BUTTON OPTIONSeries 4 can be furnished with a lockedbutton option for use in areas accessibleto the public, where tampering and van-dalism are problems. The housing has aspecial mounting clip with built-in buttonretainer. This mounting clip must be re-moved from behind panel to allow buttonremoval. Button movement during switchoperation is unaffected by locked buttonfeature. (These units cannot be relampedfrom front of panel.)




SWITCH HOUSING ORDER GUIDE

Order buttons separately from page 116.

4A11B AA 11

Switching Element

TerminalsSwitch Housing Style Incandescent(Black) Electrical Data Action .110 QC PC* Illumination

11No lamp,

has lamp socket for T-31⁄4wedge base lamps.

21#161 12-voltT-31⁄4 lamp.

31#656 or 152

28-voltT-31⁄4 lamp

91Unlighted,

no lamp socket.

4A11BBezel: all sidesMtg. clips: long sides

4A12BBezel: all sidesMtg. clips: short sides

4A31BBarriers: long sidesMtg. clips: long sides

4A32BBarriers: long sidesMtg. clips: short sides

4A33BBarrier: one long sideMtg. clips: long sides

4A34BBarrier: one long sideMtg. clips: short sides

4A21BBarriers: short sidesMtg. clips: long sides

4A22BBarriers: short sidesMtg. clips: short sides

4A23BBarrier: one short sideMtg. clips: long sides

4A24BBarrier: one short sideMtg. clips: short sides

With Housing Provisionfor Locked Button

4A13BBezel: all sidesMtg. clips: long sides

4A25BBarriers: short sidesMtg. clips: long sides

4A26BBarrier: one short sideMtg. clips: long sides

4A35Barriers: long sidesMtg. clips: long sides

4A36Barrier: one long sideMtg. clips: long sides

1-Pole(SPDT),

5 a. silver contacts

Momentary

Alt. Action

AA

BA

AD

BD

2-Pole(DPDT),


Momentary

Alt. Action

EA

FA

ED

FD

1-Pole(SPDT),

gold contacts

Momentary

Alt. Action

CA

DA

CD

CD

2-Pole(DPDT),

gold contacts

Momentary

Alt. Action

GA

HA

GD

HD

1-Pole(SPDT),


Momentary

Alt. Action

LA

MA

2-Pole(DPDT),


Momentary

Alt. Action

NA

PA

1-Pole(SPDT),

gold alloy contacts

Momentary

Alt. Action

QA

RA

2-Pole(DPDT),

gold alloy contacts

Momentary

Alt. Action

TA

VA

Example:4A11BAA11Black switch housing with a bezel on allsides, mounting clips on long sides, 1-pole momentary-action 5-amp silver con-tacts, 110N quick-connect/solder termi-nals, and a T-31⁄4 lamp socket.

MOUNTING CLIP ORIENTATIONMounting clips on the long sides of thehousing are specified when individuallymounted or when the long sides of stripmounting housings parallel the longsides of the panel cutout slot. The mostsecure mounting is achieved when themounting clips are on the long sides.

Mounting clips on the short sides of thehousing are specified when short sides ofstrip mounted housings parallel the longsides of the panel cutout slot.




HOW TO ORDER ASSEMBLEDSWITCHES OR INDICATORSWith lamp assembled:To order a lamp assembled, enter the ap-propriate ILLUMINATION Code Number,as shown in the lamp chart on the nextpage. Example: 4A11BBA12 is furnishedwith a 6-volt lamp installed.

With button assembled:To order a button assembled in the hous-ing, add the code letters for BUTTONTYPE, DISPLAY COLOR, and LEGEND(page 60) to the housing listing. Example:4A11BBA12AGN is furnished with a greentransmitted-color unlegended button as-sembled in the housing (and with a 6-voltlamp installed).

INDICATOR ORDER GUIDEOrder buttons separately from page 107.

4C11B 11

Indicator Housing Style (Black)

Terminals Incandescent

Description .110 Q.C. P.C. Illumination

11No lamp, has

lamp socket for T-31⁄4wedge base lamps.

21#161 12-voltT-31⁄4 lamp.

31#656 or 152

28-voltT-31⁄4 lamp

91Unlighted,

no lamp socket.

Bezel: all sides 4C11B 4D11BMtg. clips: long sides

Bezel: all sides 4C12B 4D12BBarriers: short sides

Barriers: short sides 4C21B 4D21BMtg. clips: long sides

Barriers: short sides 4C22B 4D22BMtg. clips: short sides

Barrier: one short side 4C23B 4D23BMtg. clips: long sides

Barrier: one short side 4C24B 4D24BMtg. clips: short sides

Barriers: long sides 4C31B 4D31BMtg. clips: long sides

Barriers: long sides 4C32B 4D32BMtg. clips: short sides

Barrier: one long side 4C33B 4D33BMtg. clips: long sides

Barrier: one long side 4C34B 4D34BMtg. clips: short sides

With Housing Provisionfor Locked Button

Bezel: all sides 4C13B 4D13BMtg. clips: long sides

Barriers: short side 4C25B 4D25BMtg. clips: long sides

Barrier: one short side 4C26B 4D26BMtg. clips: long sides

Barriers: long sides 4C35B 4D35BMtg. clips: long sides

Barrier: one long side 4C36B 4D36BMtg. clips: long sides

Example:4C11B11Black indicator housing with a bezel on allsides, mounting clips on long sides, 110Nquick-connect/solder terminals, and asocket for a T-31⁄4 lamp.

MOUNTING CLIP ORIENTATIONMounting clips on the long sides of thehousing are specified when individuallymounted or when the long sides of stripmounted housings parallel the long sidesof the panel cutout slot. The most securemounting is achieved when the mountingclips are on the long sides.

Mounting clips on the short sides of thehousing are specified when short sides ofstrip mounted housings parallel the longsides of the panel cutout slot.




BUTTON ORDER GUIDE4B1 A G N

Button LegendWith Button Display (Legend Order Sheet must accompany

Metal Shell* Type Color all orders for legended buttons)

ATransmitted color.

5 sides lighted.1-piece translucent button.

BProjected color5 sides lighted.

Translucent white button& color insert.

CDead front,

5 sides lighted.Transparent black button& translucent color insert

DDead front,

Only face lighted.Transparent black button& translucent color insert.

ETransmitted color.

5 sides lighted.Transparent colorless

button &translucent color insert.

U, N, or K type only.

FTransmitted color.Only face lighted.

Transparent colorlessbutton & color insert.U, N or K type only.

GSame as type ‘‘A’’

except .250N higher

BStd. Blue

GStd. Green

RStd. Red

STransparent Black

(Unlightedapplications only)

YStd. Yellow

WStd. White

(Do not use withType B button)

AStd. Amber

(For use with Type Aor G button only)

UNo legend, button

(incl. insert) unassembled.(For customer who does own legending.)

Use with any button except 4B1A—

NNo legend, button assembled.

(For applications not requiring legends.)Use with any button.

LLegend on button only, button assembled.

(For customer who prefers to haveMICRO SWITCH provide legending.)Use with any button except E and F.

KLegend on insert only, button assembled.

(for C, D, E and F button types.)

JLegends on both button and insert,

button assembled.Use with C & D button types

4B2Both button and metal

shell provided.

Button WithMetal Shell,

WithProvision for

Locked Button*

4B3Both button and metal

shell provided.

ButtonWithout

Metal Shell

4B1Button only.

(without metal shell).For replacementpurposes only.

*To be ordered with switch.

LEGENDINGPad printed legendsUse Legend Order Sheet FO-63039 (seepage 110) to specify pad printed legends.Reproduce it on your office copier. Leg-ends are oversprayed for maximum dura-bility.

Film legendsFilm legends are not supplied by MICROSWITCH. However, this service is readilyavailable from commercial sources ormay be provided through your in-housecapabilities. The film should be polyesterto withstand lamp heat and must be preci-sion cut, per the dimensions shown onthe next page, to insure proper alignment.

The film fits into a small undercut on theface of the button insert. The film is heldsecurely when the outer button and insertare snapped together. (Note: It is difficultto disassemble for legend changes with-out damaging the parts.)

Button and insert should be snapped to-gether prior to being assembled to thebutton shell.

ButtonButton and metal shell

Example:4B1AGNGreen (transmitted color) unlegendedbutton. (If the button shell is also desired,substitute 4B2 for 4B1.) Note: legended button should be assem-

bled as shown above, with button notchkeyed to lamp removal slot in shell. Thiswill reduce possibility of lamp droppagewhen button is removed from the hous-ing. Buttons are legended in this manner.

Push

butto

ns




LAMP ORDER GUIDE

Catalog Illum.Listing Code Incandescent Lamp Description

4Z221 21 #161 12-volt (T-31⁄4)

4Z231 31 #656 or #152 28-volt (T-31⁄4)

REPLACEMENT PARTS

MOUNTING CLIPS ORDER GUIDE

CatalogListing Description

4Z31 For long sides

4Z32 For short sides

* Each housing requires tqo long or short mountingclips.

LAMP DATAFollowing data was compiled from manufacturers’ specifications and is provided forreference only.

Illum. Industry DesignCode Lamp No. Volts Incandescent Lamp Specifications

21 161 14 Socket volts 14.0 12.0 11.0Amps .19 .17 .16MSCP 1.0 .60 .4Life (hrs. avg.) 4,000 25,000 26,500

31 656 28 Socket volts 28.0 27.0 26.0or Amps .06 .057 .054

152 MSCP .65 .52 .49Life (hrs. avg.) 5,000 7,500 10,000

METAL SHELL ORDER GUIDE

CatalogListing Description

4Z41 For type 4B1 buttons

4Z42 For type 4B3 buttons

MOUNTING CENTERS FOR STRIP MOUNT

PANEL CUTOUT FOR INDIVIDUALMOUNT (any housing style)

PANEL CUTOUT FOR STRIP MOUNT

+0,38 +.015Dimensions −0,00 −.000Housing

Style Width Length

ShortSides

Abutting

Full Bezel 79 N (20,1 mm) [No. of units x 1.03 N (26,2 mm)] - .05 N (1,4 mm)

Short Barrier 79 N (20,1 mm) [No. of units x 1.09 N (27,8 mm)] - .12 N (3,0 mm)

LongSides

Abutting

Full Bezel .98 N (24,8 mm) [No. of units x .84 N (21,3 mm)] - .05 N (1,4 mm)

Long Barrier .98 N (24,8 mm) [No. of units x .91 N (23,1 mm)] - .12 N (3,0 mm)





Terminal View

.110 QC terminal Printed circuitterminal

Quick-connect terminals are .110 N (2,8 mm) wideby .020 N (0,5 mm) thick. The slot is .130N (3,3 mm)long by .048 N (1,2 mm). Printed circuit terminalsare: Lamp — .025 (0,6 mm) by .020 N (0,5 mm):Switch — .025 N (0,6 mm) square.

All terminals are plated to permit soldering.

Panel thickness: .040-.200 in. (1,02-5,08 mm)

Key:0,0 = mm

0.00 = inches

For proper legend orientation, Series 4 switch when viewed from front of panel, shouldhave terminals1and 3 up for Figures1& 3 and to the right for Figures 2 and 4. (Figures1-4on Legend Order Sheet next page.)

Type A Button Type B Button Type C & E Buttons Type D & F Buttons(5 sides lighted) (5 sides lighted) (5 sides lighted) (Only face lighted)

Transparent Button Transparent ButtonTranslucent Translucent Type C-Black Type D-Black

Colored Button White Button Type-E Colorless Type F-Colorless

Type G Button(5 sides lighted)

Translucent Transparent Translucent Opaque Black InsertColored Button Colored Insert Colored Insert With Translucent

±.005/0,13Colored Face

*Thickness: .004 N to .007 N/0,1 to 0,18 (Film furnished by customer)

Push

butto

ns





Manual Switches SLP1 SeriesLow-Profile Pushbutton Panels


FEATURES/BENEFITS1 Designed and manufactured to meet the specific

needs of your application – including thesefeature options:– Custom layout.– Wide selection of button sizes and colors – capa-

ble of replacement from the panel front.– Full-face lighted buttons.– Legend service on buttons.– Can be furnished wired-only or with built-in inter-

face electronics.– Provision for including lighted message displays.– Termination direct to PC board.– Custom enclosures available.

1 Tactile feedback of switching action.1 Low-cost installation – complete assembly is

furnished ready to attach with mounting screws.Mass termination to plug-in connector saveswiring time.

1 Low energy contacts – compatible withmicroprocessors and other low level logiccircuitry.

1 Advanced construction and manufacturingprocesses reflect the MICRO SWITCHcommitment to high quality, reliability, andperformance.

These low-profile pushbutton panelscombine the latest advancements in con-ductive rubber switching technology andpushbuttons in a custom package, tai-lored to your requirements. They meetthe needs for reliable manual switching inapplications that do not normally requirehigh speed thruput.

Featuring .100 inch (2,4 mm) high buttonsand a .505 inch (12,8 mm) panel framedepth, their low profile easily adapts toyour system’s styling and package sizerequirements. Your design can include aprovision for digital readouts, CRTs, LCDsand other solid state lighted message dis-plays, encoders, microprocessors, etc. –which can be either assembled by you orMICRO SWITCH.

TYPICAL APPLICATIONS1 Marine Control Panels1 Instrumentation1 Banking Machines1 Office Copiers1 Test Equipment1 Vending Machines1 Medical Monitoring and Diagnostic

Devices1 Telecommunications Equipment1 Hand-Held Controllers1 Programmable Controllers1 Security Entrance Control1 Industrial Controls

SPECIFICATIONSEnvironmentalOperating Temperature –40°C to 65°C (–40° to 149°F)

Storage Temperature –40°C to 70°C (–40° to 158°F)

Altitude –100 to 50,000 ft.

Vibration MIL-STD-202F, Method 204, Condition A – frequency to 500cycles: .06 in. double amplitude or 10 G’s and a frequencyrange of 10 to 500 cycles.

Shock MIL-STD-202F, Method 213B, Condition A – 50 G’s, 1/2 sine, 11millisecond pulse.

Sulphur Atmosphere Withstands a sulphur atmosphere at 80% RH. 60°C (140°F) for10 days

Steady State Humidity MIL-STD-202F, Method 103B, Condition B – 90-95% RH at 40°Cfor 96 hours. Insulation resistance will not be less than 10megohmns min.

MechanicalTravel (nominal) 1,3 mm (.05 in.)

Operating Force (typical) 125 grams (4.4 oz. approx.)

Operating Life 10 x 106 operations, 95% survival.

Force deflection (nominal) Peak force, 125 grams (4.4 oz. approx.); Drop-off force, 60grams (2.1 oz. approx.) (See force deflection curve chart.)

ElectricalContact Rating 30 mA @ 12 VDC, .500 sec. contact duration

Closed Circuit Resistance 500 ohms max. over life.

Open Circuit Resistance 10 megohmns min.

Contact Disturbance Time 10 millisec. max. at 2 lbs. (8,9 Newtons) full overtravel force,when mechanically actuated at 4 in. (10,6 mm) sec. plungervelocity.

Capacitance Less than 20 picofarads per station.

Circuitry X-Y or common bus.

LED Vf Forward Voltage: 5V

If Forward Current: 30 mA typ.

Vr Reverse Voltage: 4V


TED RUDOLPH

OBSOLETE



SLP1 ORDER GUIDE (All possible combinations may not be available.)

SLP1 3 2 A 12 27—

Button Color1

SLP Series Circuitry Lighting Legend Matrix Unlighted LightedSLP1 2-XY

3-CommonBus

0-Unlighted1-Red LEDs

2-Green LEDs3-Yellow LEDs4-Combination

of LEDs

A-No LegendB-Legended

Black ink2

C-LegendedWhite ink2

D-LegendedBlack andWhite ink2

4-1×412-3×416-4×420-4×5

-10 Gray -25 Red-11 White -26 Yellow-12 Red -27 Green-13 Yellow -28 White-14 Green -29 Clear-15 Green (matcheslighted green)-16 Blue-18 Black

1 Factory will assign non-standard LED and button colors and combinations. Complete SLP Custom Order Sheet.2 SLP Custom Order Sheet must accompany order.

Example:SLP132A12-27 Common bus circuitry, green LEDS, no legend, 3×4 with green buttons.

INDIVIDUAL BUTTON CATALOGING

SLP51 A 20 G—

Open ColorButton Style Field Legending Unlighted Lighted

SLP51-UnlightedSLP52-Lighted

A 10-No legend20-Legended

Black ink1

21-LegendedWhite ink2

–R Red–G Green–U Green (matches

lighted green)–Y Yellow–B Blue–WWhite–K Black–A Gray

–R Red–U Green–Y Yellow–W White

1 SLP Custom Order Sheet must accompany order.

Example: SLP51A20-GGreen unlighted button legendedwith black ink.

CONSTRUCTIONThe top switching layer is a conductiverubber boot sheet (see cutaway draw-ing). When force is applied to a button,contact is made between the boot and thebottom circuit layer on a printed circuitboard. The boots impart an excellent tac-tile feedback (see force deflection curvechart).

A molded plastic housing, with panelslots for buttons and mounting holes ineach corner, is placed over all compo-nents and ultrasonically welded to theprinted circuit board. Interface circuitrycan be easily added to the PCB by the us-er or furnished built-in.

CUTAWAY VIEW

ILLUMINATIONFull face button lighting is provided byred, green, and yellow LEDs. (LED colorsshould be the same as the button they illu-minate.) The standard SLP1 offering is foruse under general office lighting condi-tions, which is usually about 80 foot can-dles. (LEDs with less brightness can beprovided.)

TERMINATIONA header type connector provides termi-nation directly from the printed circuitboard. Products shown here havestraight exit headers (see mounting di-mension drawings). Right angle exitheader connectors can also be furnished.Connector pins are .025 inch (0,64mm)square, on .100 inch (2,54 mm) centers,by .318 inch long. Suitable for use withvast array connector manufacturers’standard products.

Force Deflection Curve

Push

butto

nP

anels




1 X 4 PANEL

Note: Connector pins are .418 in./10,6 mm long.

LIGHTEDWith C, Bus Sw. Cktry.

Station Switch LED Pins:No.s Pins: Pos. Neg.

1 3-8 1-52 4-8 2-53 6-8 10-54 7-8 9-5

NON-LIGHTED

Station SwitchNo. Pins

1 1-52 2-53 3-54 4-5

3 X 4 PANEL


LIGHTED

With X-Y Sw. Cktry. With C. Bus Cktry.

Station Switch LED Pins: Switch LED Pins:Nos. Pins: Pos. Neg. Pins: Pos. Neg.

1 6-7 1-8 9-10 1-122 6-9 15-8 9-14 21-123 6-10 19-8 9-20 25-124 11-7 2-8 9-7 2-12

5 11-9 16-8 9-11 22-126 11-10 20-8 9-18 26-127 12-7 3-8 9-6 3-128 12-9 13-8 9-13 19-12

9 12-10 17-8 9-17 23-1210 14-7 4-8 9-8 4-1211 14-9 5-8 9-15 5-1212 14-10 18-8 9-16 24-12

NON-LIGHTED

With X-YStation Cktry. With C. Bus Ckty.Nos. Switch Pins: Switch Pins:

1 4-5 4-132 4-6 8-133 4-7 12-134 3-5 3-13

5 3-6 7-136 3-7 11-137 2-5 2-138 2-6 6-13

9 2-7 10-1310 1-5 1-1311 1-6 5-1312 1-7 9-13




4 x 4 PANEL


LIGHTED

With X-Y Sw. Cktry. With C. Bus Sw. Cktry.Station Switch LED Pins: Switch LED Pins:Nos. Pins: Pos. Neg. Pins: Pos. Neg.1 15-9 2-10 3-27 2-52 15-12 5-10 11-27 10-53 15-13 21-10 24-27 31-54 15-16 26-10 28-27 34-55 18-9 1-10 4-27 1-56 18-12 7-10 9-27 13-57 18-13 6-10 23-27 12-58 18-16 25-10 25-27 33-59 17-9 3-10 6-27 7-510 17-12 14-10 16-27 18-511 17-13 24-10 26-27 22-512 17-16 22-10 21-27 32-513 20-9 4-10 17-27 8-514 20-12 11-10 20-27 15-515 20-13 8-10 19-27 14-516 20-16 19-10 30-27 29-5

NON-LIGHTED

With X-YStation Cktry. With C. Bus Cktry.Nos. Switch Pins: Switch Pins:1 3-2 4-172 3-6 8-173 3-7 12-174 3-8 16-175 5-2 3-176 5-6 7-177 5-7 11-178 5-8 15-179 4-2 2-1710 4-6 6-1711 4-7 10-1712 4-8 14-1713 1-2 1-1714 1-6 5-1715 1-7 9-1716 1-8 13-17

5 X 4 PANEL


NOTE:In addition to the recessed mounting hole style shown, units can befurnished with straight thru-holes for rear panel mounting or blind holesfor front panel mounting (see drawings below).

Rear Panel Mount Front Panel Mount

LIGHTED 5 x 4 PANEL

With X-Y Sw. Cktry. With C. Bus Cktry.Station Switch LED Pins: Switch LED Pins:Nos. Pins: Pos. Neg. Pins: Pos. Neg.1 15-7 3-23 3-38 7-282 15-8 2-23 8-38 2-283 15-13 1-23 22-38 1-284 14-21 29-23 32-38 41-285 15-26 30-23 37-38 33-286 19-7 4-23 4-38 10-287 19-8 9-23 15-38 11-288 19-13 18-23 21-38 19-289 19-21 25-23 31-38 30-2810 19-26 28-23 40-38 29-2811 17-7 5-23 5-38 9-2812 17-8 11-23 17-38 13-2813 17-13 16-23 24-38 20-2814 17-21 20-23 36-38 25-2815 17-26 27-23 42-38 34-2816 14-7 6-23 6-38 12-2817 14-8 10-23 18-38 14-2818 14-13 12-23 23-38 16-2819 14-21 22-23 35-38 26-2820 14-26 24-23 39-38 27-28

NON-LIGHTED

With X-YStation Cktry. With C. Bus Cktry.Nos. Switch Pins: Switch Pins:1 4-5 4-212 4-6 8-213 4-7 12-214 4-8 16-215 4-9 20-216 3-5 3-217 3-6 7-218 3-7 11-219 3-8 15-2110 3-9 19-2111 2-5 2-2112 2-6 6-2113 2-7 10-2114 2-8 14-2115 2-9 18-2116 1-5 1-2117 1-6 5-2118 1-7 9-2119 1-8 13-2120 1-9 17-21

Push

butto

nP

anels


Manual Switches SLP1 SeriesCustom Low-Profile Pushbutton Panels


MODULAR SWITCH DESIGNPROVIDES CUSTOM FLEXIBILITYThis new modular switch design incorpo-rates the same basic construction fea-tures as the MICRO SWITCH SLP push-button panel, plus gives you the flexibilityof specifying any switch matrix configura-tion.

Standard buttons are .583-inch square.Other button sizes can be furnished tosuit your application needs.

The modular switch construction featuresgood ergonomics with positive tactilefeedback which imparts a good feel of theswitching action, and compatibility withmicroprocessors and other low-level log-ic circuitry.

The addition of a polyurethane sheet, en-ables the SLP modular switch to meet wa-ter spray and dust sections of NEMA 12.

HOW TO SPECIFY CUSTOM ARRAYSUse the SLP Custom Order Sheet tospecify your desired button layout, buttoncolors, LED colors (unless buttons are tobe unlighted), and legend sizes and col-ors (unless the buttons are to be unleg-ended).

A copy of the order sheet is on the nexttwo pages. Reproduce it on your officecopier or request copies of formFO-64419.

Note: To enhance the display when thebuttons are to be lighted by LEDs, the but-tons should be either the same color asthe LEDs or white buttons.

APPLICATION ASSISTANCEOur field engineer/factory team will behappy to work with you every step of theway—through concept, design, andmanufacturing—to help insure your cus-tom package has a quality appearanceand performs just the way you want it.Contact the 800 number.

PANEL SEAL ACCESSORY

SLP 3 × 4 array with panel seal.

Elastomer silicon seals fit over SLP pan-els to help protect their circuitry and be-hind panel components from contami-nants that might enter through the switch.See photo. The seal is positioned be-tween rear mounted units and the user’smounting panel. When properly installed,it meets NEMA 13, providing a degree ofprotection against dust, spraying of wa-ter, oil, detergent, and non-corrosive coo-lant. (Installation instructions furnishedwith seals.)

Silicon has good natural resistance to ul-traviolet light and no UV inhibitors are re-quired. This material has been thoroughlyevaluated for chemical resistance. Forfurther information, contact the 800 num-ber. Use of the seal does not lessen oper-ating life.

Note:SLP panels with thru-hole mounting arerecommended for use with the panel seal.Sealing is most effective when mountingscrews are torqued to 6±1.5 in./lbs.

ORDER GUIDE – PANEL SEALS

Array Catalog Listing

1×4 SLP61-4

3×4 SLP61-12

4×4 SLP61-16

5×4 SLP61-20




Push

butto

nP

anels







Push

butto

nP

anels


Manual Switches SN/SD SeriesHall Effect Keyboards/Modules


SD HALL EFFECT KEYBOARDSMICRO SWITCH SD Series Hall effectkeyboards meet high performance, cus-tom design, full-travel keyboard needs.They’re unsurpassed for switch speed,reliability and accuracy. Modular con-struction allows flexibility in keyboard lay-out and size.

Hall effect keyboards are offered in stan-dard profile and low profile, sealed or un-sealed, in standard arrays, and in customarrays tailored to fit the user’s specific ap-plication. Hall effect keyboards are capa-ble of handling very high throughput ap-plications.

A sealed version of the Hall effect key-board (101SD29-2E-S-H) designed forharsh duty industrial environments meetsNEMA 4 and 13 water/moisture resist-ance standards.

Request Product Sheets:26SD – 84-0250632SD – 84-0250263SD – 84-02504101SD – 84-0250112/16SD – 84-02607

SN/SD HALL EFFECT KEYSWITCHMODULESSN and SD Series keyswitch modules areideal for building custom arrays, such askeyboards, control/switch panels, andswitch matrices. Lighted display optionsare available.

SN modules are available in types thatcan be either snap-in panel mounted ormounted directly to printed circuit boardswithout additional mounting or supporthardware. Request Product Sheet 84-02508.

SD modules have a lower profile than SN.They securely mount in a metal grid platewhich provides support and enhancesgood keytop alignment between stationsand rows. Request Product Sheet 84-02505.

SD Grid Plate Mount

SN PC Board Mount

SN Snap-in Panel Mount

For further information on Hall effectkeyboards, keytops, and modules, con-tact your nearest MICRO SWITCH salesoffice. Or call 1-800-537-6945.


TED RUDOLPH

OBSOLETE



Documents

Honeywell Sensing and Control Manual Switches