HALFEN Cast-in Channels | ETA-09/0339 ©2018

HALFEN HSC STUD CONNECTOR

CONCRETE

HALFEN CAST-IN CHANNELS

CONCRETE

ETA_HTA 06/18-E

Note: This translation of the original German version has not been verified by the Deutsches Institut für Bautechnik.

HALFEN HTA -CE CAST- IN CHANNELS

Genera l note

This approval only applies to original HALFEN products manufactured by HALFEN. The specifications in this approval are not transferable to other products. Users are fully liable for personel injuries and material damage caused by third-party products used instead of HALFEN products.

Use of third-party productsUse of third-party products

Z29724.18 8.06.01-128/14

European Technical

Assessment

ETA-09/0339

of 28 June 2018 English translation prepared by DIBt - Original version in German language General Part

Technical Assessment Body issuing the European Technical Assessment:

Deutsches Institut für Bautechnik

Trade name of the construction product Halfen anchor channel HTA

Product family to which the construction product belongs

Cast-in anchor channels

Manufacturer Halfen GmbH Abt. Forschung und Entwicklung Liebigstraße 14 40764 Langenfeld DEUTSCHLAND

Manufacturing plant Werk Langenfeld Liebigstraße 14 40764 Langenfeld

This European Technical Assessment contains

30 pages including 3 annexes which form an integral part of this assessment

This European Technical Assessment is issued in accordance with Regulation (EU) No 305/2011, on the basis of

EAD 330008-02-0601

European Technical Assessment

ETA-09/0339

English translation prepared by DIBt

Page 2 of 30 | 28 June 2018

Z29724.18 8.06.01-128/14

The European Technical Assessment is issued by the Technical Assessment Body in its official language. Translations of this European Technical Assessment in other languages shall fully correspond to the original issued document and shall be identified as such.

Communication of this European Technical Assessment, including transmission by electronic means, shall be in full. However, partial reproduction may only be made with the written consent of the issuing Technical Assessment Body. Any partial reproduction shall be identified as such.

This European Technical Assessment may be withdrawn by the issuing Technical Assessment Body, in particular pursuant to information by the Commission in accordance with Article 25(3) of Regulation (EU) No 305/2011.


ETA-09/0339


Page 3 of 30 | 28 June 2018

Z29724.18 8.06.01-128/14

Specific Part

1 Technical description of the product

The Halfen anchor channel HTA is a system consisting of a C-shaped channel profile of steel and stainless steel and at least two metal anchors non-detachably fixed on the channel back and channel bolts.

The anchor channel is embedded surface-flush in the concrete. Halfen-channel bolts (hammerhead or hooked) with appropriate hexagon nuts and washers are fixed to the channel.

The product description is given in Annex A.

2 Specification of the intended use in accordance with the applicable European Assessment Document

The performances given in Section 3 are only valid if the anchor channel is used in compliance with the specifications and conditions given in Annex B.

The verifications and assessment methods on which this European Technical Assessment is based lead to the assumption of a working life of the anchor channel of at least 50 years. The indications given on the working life cannot be interpreted as a guarantee given by the producer, but are to be regarded only as a means for choosing the right products in relation to the expected economically reasonable working life of the works.

3 Performance of the product and references to the methods used for its assessment

3.1 Mechanical resistance and stability (BWR 1)

Essential characteristic Performance

Characteristic resistance to tension load

(static and quasi-static loading)

See Annex C1 to C3 and C6

Characteristic resistance to shear load

(static and quasi-static loading) See Annex C4 to C6

Displacements (static and quasi-static loading) See Annex C3 to C4

Characteristic resistance under fatigue cyclic loads

(tension) See Annex C9 to C11

3.2 Safety in case of fire (BWR 2)

Essential characteristic Performance

Reaction to fire Class A1

Resistance to fire See Annex C7 and C8

4 Assessment and verification of constancy of performance (AVCP) system applied, with reference to its legal base

In accordance with EAD No. 330008-02-0601, the applicable European legal act is: [2000/273/EC].

The system to be applied is: 1


ETA-09/0339


Page 4 of 30 | 28 June 2018

Z29724.18 8.06.01-128/14

5 Technical details necessary for the implementation of the AVCP system, as provided for in the applicable European Assessment Document

Technical details necessary for the implementation of the AVCP system are laid down in the control plan deposited with Deutsches Institut für Bautechnik.

Issued in Berlin on 28 June 2018 by Deutsches Institut für Bautechnik

BD Dipl.-Ing. Andreas Kummerow beglaubigt:

Head of Department Müller

Page 5 of European Technical Assessment ETA-09/0339 of 28 June 2018 English translation prepared by DIBt

Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14


Z29729.18 8.06.01-128/14

CONTACT HALFEN WORLDWIDEHALFEN is represented by subsidiaries in the following countries, please contact us:

NOTES REGARDING THIS CATALOGUETechnical and design changes reserved. The information in this publication is based on state-of-the-art technology at the time of publication. We reserve the right to make technical and design changes at any time. HALFEN GmbH shall not accept liability for the accuracy of the information in this publication or for any printing errors.

The HALFEN GmbH subsidiaries in Germany, France, the Netherlands, Austria, Poland, Switzerland and the Czech Republic are Quality Management certified according to ISO 9001:2015, Certificate no. 202384-2016-AQ-GER-DAkkS.

Furthermore HALFEN is represented with sales offices and distributors worldwide. Please contact us: www.halfen.com

www.dnvgl.com

Austria HALFEN Gesellschaft m.b.H.Leonard-Bernstein-Str. 101220 Wien

Phone: +43 - 1 - 259 6770 E-Mail: [email protected]: www.halfen.at

Fax: +43 - 1 - 259 - 6770 99

Belgium / Luxembourg HALFEN N.V.Borkelstraat 1312900 Schoten

Phone: +32 - 3 - 658 07 20E-Mail: [email protected]: www.halfen.be

Fax: +32 - 3 - 658 15 33

China HALFEN Construction Accessories Distribution Co.Ltd.Room 601 Tower D, Vantone CentreNo. A6 Chao Yang Men Wai StreetChaoyang District Beijing · P.R. China 100020

Phone: +86 - 10 5907 3200E-Mail: [email protected]: www.halfen.cn

Fax: +86 - 10 5907 3218

Czech Republic HALFEN s.r.o.Business Center ŠafránkovaŠafránkova 1238/1155 00 Praha 5

Phone: +420 - 311 - 690 060E-Mail: [email protected]: www.halfen.cz

Fax: +420 - 235 - 314 308

France HALFEN S.A.S.18, rue Goubet75019 Paris

Phone: +33 - 1 - 445231 00E-Mail: [email protected]: www.halfen.fr

Fax: +33 - 1 - 445231 52

Germany HALFEN Vertriebsgesellschaft mbHLiebigstr. 14 40764 Langenfeld

Phone: +49 - 2173 - 970 - 0E-Mail: [email protected]: www.halfen.de

Fax: +49 - 2173 - 970 225

Italy HALFEN S.r.l. Soc. UnipersonaleVia F.lli Bronzetti N° 2824124 Bergamo

Phone: +39 - 035 - 0760711E-Mail: [email protected]: www.halfen.it

Fax: +39 - 035 - 0760799

Netherlands HALFEN b.v.Oostermaat 37623 CS Borne

Phone: +31 - 74-267 14 49E-Mail: [email protected]: www.halfen.nl

Fax: +31 - 74-267 26 59

Norway HALFEN ASPostboks 20804095 Stavanger

Phone: +47 - 51 82 34 00E-Mail: [email protected]: www.halfen.no

Poland HALFEN Sp. z o.o.Ul. Obornicka 28760-691 Poznan

Phone: +48 - 61 - 622 14 14E-Mail: [email protected]: www.halfen.pl

Fax: +48 - 61 - 622 14 15

Spain HALFEN IBERICA, S.L.Polígono Industrial Santa Ana c/ Ignacio Zuloaga 2028522 Rivas-Vaciamadrid

Phone: +34 916 669 181E-Mail: [email protected]: www.halfen.es

Fax: +34 916 669 661

Sweden Halfen ABVädursgatan 5412 50 Göteborg

Phone: +46 - 31 - 98 58 00E-Mail: [email protected]: www.halfen.se

Fax: +46 - 31 - 98 58 01

Switzerland HALFEN Swiss AGHertistrasse 25 8304 Wallisellen

Phone: +41 - 44 - 849 78 78E-Mail: [email protected]: www.halfen.ch

Fax: +41 - 44 - 849 78 79

United Kingdom /Ireland

HALFEN Ltd.A1/A2 Portland CloseHoughton Regis LU5 5AW

Phone: +44 - 1582 - 47 03 00E-Mail: [email protected]: www.halfen.co.uk

Fax: +44 - 1582 - 47 03 04

United States of America HALFEN USA Inc. PO Box 18687 San Antonio TX 78218

Phone: +1 800.423.91 40E-Mail: [email protected]: www.halfenusa.com

Fax: +1 877.683.4910

For countries not listed HALFEN International

HALFEN International GmbHLiebigstr. 14 40764 Langenfeld / Germany

Phone: +49 - 2173 - 970 - 0 E-Mail: [email protected]: www.halfen.com

Fax: +49 - 2173 - 970 - 849

For further information please contact: www.halfen.com

© 2

018

HA

LFEN

Gm

bH, G

erm

any

appl

ies

also

to

copy

ing

in e

xtra

cts.

B - 0

45 -

E - 0

6/18

PD

F 0

6/18

Documents

HALFEN Cast-in Channels | ETA-09/0339 ©2018