Author
ngokiet
View
229
Download
2
Embed Size (px)
H3C S7500E Series Ethernet Switches
Installation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-080406-20080725-C-1.04
Copyright 2007-2008, Hangzhou H3C Technologies Co., Ltd.
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care,
, TOP G, , IRF, NetPilot, Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware, Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their respective owners.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this document do not constitute the warranty of any kind, express or implied.
Technical Support
http://www.h3c.com
About This Manual
Organization
H3C S7500E Series Ethernet Switches Installation Manual is organized as follows:
Chapter Contents
1 Product Overview Introduces the H3C S7500E Series Ethernet Switches in terms of chassis, SRPUs, LPUs, power supply, and fan tray.
2 Installation Preparations Specifies the installation requirements of the H3C S7500E Series Ethernet Switches and presents installation precautions.
3 Hardware Installation Introduces how to install the H3C S7500E Series Ethernet Switches and how to connect the power supply, ground cables, and the console cable.
4 System Commissioning Introduces the startup process of the H3C S7500E Series Ethernet Switches, including power-on and system initialization.
5 Hardware Maintenance
Introduces how to install and remove power modules, cards, fans, mounting ears, cable management bracket, CF card, and air filters of the H3C S7500E Series Ethernet Switches.
6 Software Maintenance Introduces how to load and upgrade the software of the H3C S7500E Series Ethernet Switches.
7 Troubleshooting Introduces how to troubleshoot the configuration system, power modules, fans, and LPUs of the H3C S7500E Series Ethernet Switches.
Appendix A List of Pluggable Modules
Introduces pluggable modules for different types of ports and their related parameters.
Appendix B AC Power Cables Used in Different Countries or Regions
Introduces AC power cables used in different countries or Regions, including 10A AC power cables and 16A AC power cables.
Appendix C Compliance and safety manual Provides Compliance and safety manual
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are optional.
{ x | y | ... } Alternative items are grouped in braces and separated by vertical bars. One is selected.
[ x | y | ... ] Optional alternative items are grouped in square brackets and separated by vertical bars. One or none is selected.
{ x | y | ... } * Alternative items are grouped in braces and separated by vertical bars. A minimum of one or a maximum of all can be selected.
[ x | y | ... ] * Optional alternative items are grouped in square brackets and separated by vertical bars. Many or none can be selected.
& The argument(s) before the ampersand (&) sign can be entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click .
[ ] Window names, menu items, data table and field names are inside square brackets. For example, pop up the [New User] window.
/ Multi-level menus are separated by forward slashes. For example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation may cause bodily injury.
Caution Means reader be careful. Improper operation may cause data loss or damage to equipment.
Note Means a complementary description.
Related Documentation
In addition to this manual, each H3C S7500E Series Ethernet Switches documentation set includes the following:
Manual Description
H3C S7500E Series Ethernet Switches Operation Manual
It guides users how to use H3C S7500E Series Ethernet Switches.
H3C S7500E Series Ethernet Switches Command Manual
It provides detailed descriptions of the commands available on H3C S7500E Series Ethernet Switches.
Obtaining Documentation
You can access the most up-to-date H3C product documentation on the World Wide Web at this URL: http://www.h3c.com.
The following are the columns from which you can obtain different categories of product documentation:
[Products & Solutions]: Provides information about products and technologies, as well as solutions.
[Technical Support & Document > Technical Documents]: Provides several categories of product documentation, such as installation, operation, command, and typical configuration example.
[Technical Support & Document > Product Support > Software]: Provides the documentation released with the software version.
Documentation Feedback
You can e-mail your comments about product documentation to [email protected]
We appreciate your comments.
mailto:[email protected]
Environmental Protection
This product has been designed to comply with the requirements on environmental protection. For the proper storage, use and disposal of this product, national laws and regulations must be observed.
Installation Manual H3C S7500E Series Ethernet Switches Table of Contents
i
Table of Contents
Chapter 1 Product Overview ........................................................................................................ 1-1 1.1 Introduction ........................................................................................................................ 1-1 1.2 Physical Description of the S7500E Series ....................................................................... 1-1
1.2.1 Chassis and Slots ................................................................................................... 1-1 1.2.2 Backplane................................................................................................................ 1-9 1.2.3 Power Supply System ............................................................................................. 1-9 1.2.4 Fan Tray ................................................................................................................ 1-18 1.2.5 Air Filter ................................................................................................................. 1-19
1.3 SRPUs ............................................................................................................................. 1-19 1.3.1 SRPU Types.......................................................................................................... 1-19 1.3.2 LSQ1MPUA0 SRPU.............................................................................................. 1-20 1.3.3 Dedicated S7503E-S SRPU-LSQ1CGP24TSC0.................................................. 1-24 1.3.4 Salience VI-10GE SRPU-LSQ1SRP2XB0............................................................ 1-28 1.3.5 Salience VI SRPU-LSQ1SRPB0........................................................................... 1-33 1.3.6 Salience VI-Turbo SRPU-LSQ1SRP1CB0 ........................................................... 1-36 1.3.7 Salience VI-Lite SRPU-LSQ1MPUB0 ................................................................... 1-40 1.3.8 Salience VI-Plus SRPU-LSQ1SRPD0 .................................................................. 1-44 1.3.9 Salience VI-GE SRPU-LSQ1SRP12GB0 ............................................................. 1-47
1.4 LPUs ................................................................................................................................ 1-52 1.4.1 LSQ1FP48SA0...................................................................................................... 1-52 1.4.2 LSQ1FV48SA0...................................................................................................... 1-53 1.4.3 LSQ1GP12EA0 ..................................................................................................... 1-54 1.4.4 LSQ1GP12SC0..................................................................................................... 1-55 1.4.5 LSQ1GP24SC0..................................................................................................... 1-56 1.4.6 LSQ1GP48SC0..................................................................................................... 1-57 1.4.7 LSQ1GT24SC0 ..................................................................................................... 1-58 1.4.8 LSQ1GV48SA0 ..................................................................................................... 1-59 1.4.9 LSQ1GV48SC0..................................................................................................... 1-60 1.4.10 LSQ1P24XGSC0 ................................................................................................ 1-61