8
Guitar FX Plug-in Suite User Guide FA0000-01

Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

Embed Size (px)

Citation preview

Page 1: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

1

Guitar FX Plug-in SuiteUser Guide

FA0000-01

Page 2: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

2

Contents

Installation ........................................................ 3

Software Activation ........................................... 3

Guitar FX Plug-in Suite Modules ........................ 5

Amps

Brit Rock ........................................................ 5

Tweed Bass .................................................... 5

Tweed Twin .................................................... 5

US Modern Valve ............................................ 6

V-AC ............................................................... 6

Distortion/Overdrive Pedals

70’s Fuzz ........................................................ 7

Distorter ........................................................ 7

Fat Pie ............................................................ 7

Green Overdrive ............................................. 7

Guitar Tools

Hot Tuna ......................................................... 8

Smart Hum Killer ........................................... 8

Page 3: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

3

Installation1. Double click on the Guitar FX Plug-in Suite Installer

2. Follow onscreen instruction to complete installation.

Software ActivationThe Guitar FX Plug-in Suite requires you to activate the software before you are able to use it. Activation requires internet access, however this is not specifi cally required on the computer on which the plug-ins are installed.

Here are the steps required to activate your plug-ins.

1. Open your DAW of choice.

2. Open any one of the plug-ins in the Suite in the same manner as you would open any other VST or AU plug-in in your DAW.

On opening the plug-in an activation window will appear.

Music computer connected to the Internet:

Step 1: Submit Activation Request.

Click the ‘www’ button and your computer will automatically open a web browser and navigate to the activation page.

Music computer NOT connected to the Internet:

Step 1: Offl ine Activation

Click the ‘Offl ine Activation’ button and choose a location on your computer to save the Activation Request File.

The fi le will be named: GuitarFXSuite-Activation-Request.html

Now copy this fi le on to some transferable media (USB memory stick) and then copy the fi le onto an Internet connected computer.

Double-Click the fi le and your web browser will open and automatically navigate to the activation page.

Page 4: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

4

Enter your details and the Activation Code. The Activation Code can be found on a sticker on the back of the installer CD wallet (if purchased as a boxed copy). If you purchased the software on our E-Store, then the Activation Code will be emailed to you and also displayed in your browser at the time of purchase.

It will be in the form 0000-0000-0000-0000.

Once you have entered your details press ‘Submit’. A License File will be sent to your email address and also output as a file download to your browser download folder (normally your Desktop).Please remember to disable junk mail filters or to check your junk mail folder.

The file will be named: GuitarFXSuite-License-XXXX-XX-XX.fnlf Where XXXX-XX-XX is the date of activation.

Step 2 Install License File:

Now return to the plug-in window in your DAW and click here. Locate the License file (which has been downloaded to the computer, or transferred from another computer).

Once you have selected the license file, the activation window will now display the loaded plug-in.

Page 5: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

5

Guitar FX Plug-in Suite Modules

Amps

Brit Rock

GAIN Knob – Adds overdrive. This increases the input signal in the preamp to saturate the valves. PRESENCE Knob – Increases clarity by emphasising higher frequency components.

BASS Knob – Defines the amount of low frequency.

MIDDLE Knob – Defines the amount of mid frequency.

TREBLE Knob – Defines the amount of high frequency (brightness).

MASTER VOLUME Knob – Sets the level.

Tweed Bass

BASS Knob – Defines the amount of low frequency (bass).

MIDDLE Knob – Defines the amount of mid frequency (presence).

TREBLE Knob – Defines the amount of high frequency (brightness).

VOLUME Knob – Sets the level.

Tweed Twin

BASS Knob – Defines the amount of low frequency.

MIDDLE Knob – Defines the amount of mid frequency (presence). TREBLE Knob – Defines the amount of high frequency (brightness).

VOLUME Knob – Sets the level.

Page 6: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

6

US Modern Valve

GAIN Knob – Sets the amount of harmonic distortion.

PRESENCE Knob – Gives the signal more strength.

BASS Knob – Defines the amount of low frequency.

MID Knob – Defines the amount of mid frequency.

HIGH Knob – Defines the amount of high frequency (brightness).

MASTER Knob – Sets the level.

V-AC

BASS Knob – Defines the amount of low frequency.

TREBLE Knob – Defines the amount of high frequency (brightness).

TOP CUT Knob – Filters out the high frequency by acting as a low-pass filter. Rotate clockwise to reduce the cut-off frequency and so increase the amount of high frequency that is removed.

MASTER VOLUME Knob – Sets the level.

Page 7: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

7

Distortion/Overdrive Pedals

70’s Fuzz

VOLUME Knob – Sets the volume.

FUZZ Knob – Sets the amount of distortion.

Distorter

TONE Knob – Acts in the same way as the filter knob on other effects; rotating in a clockwise direction filters out bass and rotating in an anticlockwise direction removes high frequency. In a central position, no filtering occurs.

LEVEL Knob – Sets the volume.

DISTORTION Knob – Sets the amount of harmonic distortion.

Fat Pie

VOLUME Knob – Sets the level.

TONE Knob – Acts in the same way as the filter knob on other effects; rotating in a clockwise direction filters out bass and rotating in an anticlockwise direction removes high frequency. In a central position, no filtering occurs.

SUSTAIN Knob – Allows the duration of notes to be extended.

Green Overdrive

DRIVE Knob – Sets the amount of overdrive, which creates a subtler distortion.

TONE Knob – Acts in the same way as the filter knob on other effects; rotating in a clockwise direction filters out bass and rotating in an anticlockwise direction removes high frequency. In a central position, no filtering occurs.

LEVEL Knob – Sets the volume.

Page 8: Guitar FX Plug-in Suite - Focusrite · 70’s Fuzz ... The Guitar FX Plug-in Suite requires you to activate the software before you are able to use ... Hum is a buzzing sound that

8

Guitar Tools

Hot Tuna

The Tuna is an effect that allows you to tune an instrument. There are no controls available, only displays. When a note is received, the closest semitone will appear to the left of the meter, e.g. F#. The exact tuning of the note will then be displayed on the meter, showing up to half a semitone either side of the displayed note, e.g. +/- 25. Adjust the tuning of the instrument until the LED meter displays 0 (a central position).

Smart Hum Killer

The hum killer can be used to remove mains hum from a signal. Hum is a buzzing sound that can be caused by the mainselectricity supply. The hum killer works by filtering out and gating the signal. The gate has Threshold and Envelope controls,where the latter is a combination of attack, hold and decay. The killer also has the ability to analyse and act intelligently on asignal using Learn mode.

LEARN – Click to activate Learn mode. Do not play or send a signal through the effect whilst learning. The killer will thenanalyse the signal for a few seconds to isolate the hum, after which the LED will light to indicate that the killer hasdeactivated Learn mode and is acting on the signal.

THRESHOLD Knob – Sets the threshold of the gate. Rotate clockwise to increase the threshold. Increasing the thresholdmakes the gating more obvious.

ENVELOPE Knob – Sets the envelope of the gate. In the short position, there is just a brief attack. Rotate clockwise tointroduce a decay, then increase both attack and decay times. As the dial is rotated further, a gradually increasing hold timeis also introduced.

GAIN REDUCTION Meter – Displays the amount of gain reduction occurring as a result of gating

HUM FREQ – Selects the type of mains supply value in use. Choose the setting that applies to your country. For the UK,choose 50Hz, and for the US, choose 60Hz

CPU – Sets the CPU usage to Hi-res or Lo-res. High res uses more CPU power and filters out a wider range of sound (mainbands, plus sidebands). Lo-res just focuses on the main bands and uses less CPU power

E & O.E.