EU-Morocco-Egypt-Tunisia-Algeria-Libya International Cooperation (EU-METALIC) Erasmus Mundus – Action 2 – Strand 1

Programme

Guide to Applying for an EU-METALIC

Scholarship

What is EU-METALIC? • EU-METALIC is an EU funded project under the Erasmus Mundus Action 2

Strand 1 scheme.

• In accordance with the overall Erasmus Mundus Action 2 Strand 1 objectives, the EU-Morocco-Egypt-Tunisia-Algeria-Libya International Cooperation (EU-METALIC) aims to promote European higher education, to help improve and enhance the career prospects of students and to promote intercultural understanding through cooperation with Morocco, Egypt, Tunisia, Algeria and Libya, in accordance with EU external policy objectives in order to contribute to the sustainable development of these countries in the field of higher education.

• The EU-METALIC programme facilitates student and staff mobilities between Morocco, Egypt, Tunisia, Algeria and Libya and the EU

Partners EU PARTNERS (10)

Cardiff Metropolitan University – UK

Ecole Centrale de Nantes - France

Freie Universitat Berlin - Germany

La Sapienza University of Rome – Italy

Technishce Universitat Berlin - Germany

University of Bologna - Italy

University of Graz - Austria

Université de Lorraine – France

Université Montpellier 1 - France

University of Santiago de Compostela - Spain

LOT COUNTRY PARTNERS (10)

University Hassan II, Casablanca - Morocco

Superior Institute of Science and Technology -

Morocco

Ain Sham University - Egypt

Alexandria University - Egypt

Arab Academy for Science & Technology - Egypt

University of Sfax - Tunisia

University of Sousse - Tunisia

University of Algiers - Algeria

University AbouBekr Belkaid of Tlemcem - Algeria

University of Sirte - Libya

Associate Partners EU ASSOCIATE PARTNERS (3)

RMEI Network

European Students Union (ESU)

Scholars At Risk (SAR)

MOROCCAN ASSOCIATE PARTNERS (3)

Ministry of Higher Education - Morocco

University of Cadi Ayyad

Women in Higher Education Elite Leaders

(WHEEL)

EGYPTIAN ASSOCIATE PARTNER (2)

Ministry of Higher Education - Egypt

Sinai University

ALGERIAN ASSOCIATE PARTNER (1)

Ministry of Higher Education - Algeria

LIBYAN ASSOCIATE PARTNER (1)

Ministry of Higher Education - Libya

Project Objectives The EU-METALIC project has set objectives which are in line with EMA2-Strand1 objectives which

contribute to the mutual enrichment of third-countries and the EU, not only in academic matters, but also in political, educational, cultural and economic matters. These objectives are:

• To better adapt the Moroccan, Egyptian, Tunisian, Algerian and Libyan institutions to contribute to

national development needs and to respond to globalisation challenges. • To better integrate the Third-Country universities within the Euro-Mediterranean area. • To contribute to the mutual enrichment of societies by developing the qualifications of the three

target groups at all levels. • To promote mobility both for students, researchers, academics and administrative staff from third

countries especially from vulnerable groups, selected on the basis of academic excellence, to obtain qualifications and/or experience in the European Union;

• To raise the academic level and international visibility of the third-countries partners’ Higher

Education through joint degrees, co-tutorship of thesis, new programmes and exchange of academic staff. This will develop and strengthen the HE learning and teaching capacity of the Third-Country institutions.

Target Groups

TARGET GROUP 1 – all 5 mobility levels, both mobility directions

Students, and staff registered in one of the Higher Education Institutions that is a

member of the partnership.

TARGET GROUP 2 – Masters, Doctorate Post-Doctorate and Staff only, both mobility

directions

Nationals of European countries who are registered in a higher education institution

of these countries that is not included in the partnership (students and staff), or who

have obtained a university degree or equivalent by any European HEI (students only).

European Students To be eligible, European students (undergraduate and master students as well as doctoral and post

doctoral candidates):

1. Must be a national of one of the eligible European countries;

2. For Target Group 1 (TGI): students need to be registered at one of the European countries HEIs within the partnership at the time of submitting their application to the partnership. Undergraduate students must have successfully completed at least one year of studies in their home institution;

3. For Target Group 2 (TGII): students need either to be registered in a HEI (not included in the partnership) of any European country or to have obtained a university degree or equivalent from a HEI of any European country;

4. Must have sufficient knowledge of the language of the courses or of one of the languages currently spoken in the hosting countries.

5. Undergraduate students must have successfully completed at least one year of studies at first higher education level

Staff (Academic / Administrative)

In order to be eligible, academic and administrative staff hereafter referred as "staff": 1. Must be a national of one of the eligible European countries;

2. For Target Group 1 (TGI): EU staff must work in or be associated to one of the EU

HEIs participating in the partnership;

3. For Target Group 2 (TGII): EU staff must work in or be associated to a HEI (not included in the partnership) of any European country.

4. The mobility assignments must be based on partnership agreements between the members of the partnership;

5. The home and host universities and the individual staff must agree on the programme of lectures to be delivered by the visiting staff, on the research activities or on the type of training to be followed.

Scholarships

A monthly allowance - subsistence

Insurance costs: up to 75€ per month

Travel costs: up to 1,500 €

Tuition Fees for students of up to 3000€ (if applicable)

Scholarships include:

Type of mobility Subsistence Allowance Mobility Duration

Undergraduate 1.000 Euros per month

1 academic semester – 10 months (TG1)

1 academic semester – 36 months (TG3)

Master 1.000 Euros per month

1 academic semester – 10 months (TG1 – EU)

1 academic semester – 24 months (TG1 – Third

Country)

1 academic semester – 24 months (TG2 & TG3)

Doctorate 1.500 Euros per month 6 – 36 months (TG1, TG2 & TG3)

Post-doctorate 1.800 Euros per month 6 – 10 months (TG1, TG2 & TG3)

Staff 2.500 Euros per month 1 – 3 months (TG1 & TG2 only)

Scholarship Details

A minimum of 189 Scholarships available

Deadline for UG, Masters, Doctorate, Post-Doctorate scholarships to begin – 31st December 2013

Staff Scholarships to begin at any time, although must be completed by July 2016

% of mobility per Target Group

– Target Group 1 must represent at least 50% of the individual mobility covered by the project;

– Lot Country students and staff need to represent at least 70% of the individual mobility covered by the project;

– European students and staff cannot exceed 30% of the individual mobility flows covered by the project.

% distribution per type of mobility

Undergraduates 30-40% of the total

Masters 15-25% of the total

Doctorates 5-15% of the total

Post-Doctorate fellowships 5-15% of the total

Staff 15-25% of the total

Selection Documents A comprehensive list of documents that must be uploaded with your application in order for it to be considered eligible are detailed on the EU-METALIC website according to the mobility level. IMPORTANT INFORMATION: All documents attached in electronic format to the application will also have to be submitted as original signed documents at the host institution once if you are successfully selected. You must upload scanned versions in image format (i.e. JPEG, BMP, PNG) of all your original documents (transcripts of record, diploma, degree certificates, language certificates etc.). In addition, scanned versions of certified translations/official translations of all these documents into English or the language of your host country are obligatory! **PLEASE NOTE**: The documents listed on the website is general guidance on the documents you need to gather to upload with your application. Some Host Universities may require additional documents. For this reason we ask that you read the information, in addition to the information provided by the Host University on the programme information page under Pre-requisites, and also on the Partner Information Sheets available on the project website. If you have any doubts, please ensure you email your respective Host University.

How to Apply

Register as an Applicant First, visit the project website at www.eu-metalic.eu and select APPLY NOW on the homepage. You will be automatically directed to the online application database. Start the application process by registering an account on this page. It is very important that you provide a valid email address. Once you have successfully created an account, you will be prompted to log in to the online database using the username and password you have just registered

How to Apply

Register as an Applicant Please select ‘Create an account’ Start the application process by registering an account on this page.

It is very important that you provide a valid email address. Once you have successfully created an account, you will be prompted to log in to the online database using the username and password you have just registered with.

1. Basic Information Please first select which Target Group you belong to by reading the group description. Once you have selected the Target Group, please select “Next”. You will then proceed to enter you basic information. Please complete all required fields in this section. Please be careful when entering the data as this information is vital for future correspondence and evaluation purposes!

How to Apply

Please also indicate in this section if you have any special needs. Once completed please ensure you read and agree to the eligibility clauses and the Terms & Conditions and click "Save” button and proceed to “Search and Apply for courses" section.

How to Apply 2. Search and Apply for Course(s)

Select “Step 2: Search and Apply for Courses” and use this section to find the suitable program(s) for your criteria. You have the choice of applying for 2 host universities in this section. Please use the filters to minimise your search of programmes according to your preference. Please note: You may not get a relevant programs list in case that there is no program(s) offered by the Partner Universities complying with the condition(s) you applied to the filter(s). This can be double checked by viewing Fields of Study on the EU-METALIC website. Once you have selected up to a maximum of 2 choices, please proceed by clicking “Apply Now”.

How to Apply 2.1 Search and Apply

for Course(s)

Once your filters are apply you can review the available programmes. By selecting the Programme title you can view further details on the programme. If you are just browsing you can “Bookmark” this course and it will be stored in your “Course Favourites” located at the top of the web browser. This function allows you to gather several courses of interest and compare and contrast them to suit your academic strengths prior to applying. Once you are ready to apply to a programme, please select “Apply Now”.

You will need to select if the choice is your first or second choice – remember there is a maximum of 2 choices in the EU-METALIC Scholarship programme. Please indicate which priority it is by using the drop down menu.

How to Apply

3. Upload Document(s)

Please upload all of the mandatory documents listed in this page. Please note that files must be image files such as JPEG, GIF, PNG. You will be notified of the document you need to upload, and the maximum number of files per document that is permitted to upload. If a red cross appears next to the document, it means that no such file is currently stored in your application. Once uploaded successfully a green tick will appear next to the Step 3: Upload Documents to confirm they has been successfully uploaded to the application. You can view what has been uploaded by selecting the document in the below table.

An application cannot be submitted until all required documents have been uploaded. Once a green tick appears by all required documents you can then proceed to Step 4: Submit your application.

How to Apply

4. Submitting your application

When you are ready to submit a course for scholarship application, please press the “Submit” button.

Caution When you are happy with your application click on the ‘Submit’ Button, but once the application is submitted, you cannot amend your application or change any of the uploaded documents. Notice the buttons are greyed out once an application has been submitted and your application status will automatically update. You will also receive an email to confirm your submission.

For General Enquiries

To Contact the EU-METALIC Project Team for any general queries or to report technical errors, please select HELPDESK on the ‘Contact Us’ page of the website. You will then be able to complete your query ticket. If your query is course or university specific please contact the assigned contact person, details of which are found in the Partner University Information Sheets under the ‘Partners’ section.

www.eu-metalic.eu