Guide Tech Potences Eng

  • View
    50

  • Download
    0

Embed Size (px)

Text of Guide Tech Potences Eng

EUROSTYLE

TECHNICAL GUIDEJIB CRANE FROM 125 TO 2000 KGEnglish

SI 50Hz

This document and the information contained herein, is the exclusive property of Verlinde S.A. and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A. Copyright (2010) Verlinde S.A. All rights reserved.

11/2011

EUROSTYLETable of Content1 2 3 4

TECHNICAL GUIDE2/42

UPDATE HISTORY .............................................................................................................................. 3 IMPORTANT ........................................................................................................................................ 4 ADJUSTABLE CONSOLE BEARING .................................................................................................. 6 OVER BRACED WALL MOUNTED JIB CRANE 180, UKA PROFILE ............................................... 7 4.1 180 Manual slewing .....................................................................................................................................7 4.2 Specification and main dimensions ..............................................................................................................8 5 OVER BRACED COLUMN MOUNTED JIB CRANE 270, UKA PROFILE ....................................... 10 5.1 270 Manual slewing ...................................................................................................................................10 5.2 Specification and main dimensions ............................................................................................................11 5.2.1 Main dimensions, over braced column mounted jib crane 270 , UKA profile, HSF < 4000 ..................11 5.2.2 Main dimensions, over braced column mounted jib crane 270 , UKA profile, HSF 40016000..........13 6 UNDER BRACED WALL MOUNTED JIB CRANE 180, IPE PROFILE ............................................ 15 6.1 180 Manual slewing ...................................................................................................................................15 6.2 Specification and main dimensions ............................................................................................................16 7 UNDER BRACED COLUMN MOUNTED JIB CRANE 270, IPE PROFILE ...................................... 18 7.1 270 Manual slewing ...................................................................................................................................18 7.2 Specification and main dimensions ............................................................................................................19 7.2.1 Main dimensions, under braced column mounted jib crane 270, IPE profile, HSF < 4000...................19 7.2.2 Main dimensions, under braced column mounted jib crane 270, IPE profile, HSF 40016000 ..........21 8 OVER BRACED WALL MOUNTED JIB CRANE 180, IPE PROFILE ............................................... 23 8.1 180 Manual slewing ...................................................................................................................................23 8.2 Specification and main dimensions ............................................................................................................24 9 OVER BRACED COLUMN MOUNTED JIB CRANE 270, IPE PROFILE ......................................... 26 9.1 270 Manual slewing ...................................................................................................................................26 9.2 Specification and main dimensions ............................................................................................................27 9.2.1 Main dimensions, over braced column mounted jib crane 270, IPE-profile, HSF < 4000.....................27 9.2.2 Main dimensions, over braced column mounted jib crane 270, IPE-profile, HSF 40016000 ............29 10 OPTIONAL BASE PLATE.............................................................................................................. 31 11 APPENDIX A ................................................................................................................................. 32 11.1 Q5 U2 Class ................................................................................................................................................32 11.1.1 Classification of crane and hoist mechanism......................................................................................32 11.1.2 Calculation of the Group of Hoist Mechanism ....................................................................................33 11.2 Q4 U3 Class ................................................................................................................................................34 11.2.1 Classification of crane and hoist mechanism......................................................................................34 11.2.2 Calculation of the Group of Hoist Mechanism ....................................................................................35 11.3 Q3 U4 Class ................................................................................................................................................36 11.3.1 Classification of crane and hoist mechanism......................................................................................36 11.3.2 Calculation of the Group of Hoist Mechanism ....................................................................................38 11.4 Q2 U5 Class ................................................................................................................................................39 11.4.1 Classification of crane and hoist mechanism......................................................................................39 11.4.2 Calculation of the Group of Hoist Mechanism ....................................................................................41

This document and the information contained herein, is the exclusive property of Verlinde S.A. and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A. Copyright (2010) Verlinde S.A. All rights reserved.

11/2011

EUROSTYLE1 UPDATE HISTORYChanges Section p15,18,19 Tables updated, HL dimension and KIT Drawings updated, UKA PE dimensions changed

TECHNICAL GUIDE3/42

Date 6.11.2009 21.1.2010 11.3.2010

Handled by ETTPIA ETTNMA ETTNMA ETTNMA ETTNMA ETTNMA

1000KG, L4000,HSF4000, IPE360 changed to IPE300 and D530 changed to D630

Section 10 added; p21, p24, p13,p1 6 drawings updated (HC dim. added); p12 1000 kg 25.3.2010 weight updated Section 3 added 26.3.2010 30.8.2010

p.6, 9, 11, 13, 14, 17, Travelling speed added, base plate 1600x1600 removed (not in use) 19, 21, 22, 25, 27, 29

This document and the information contained herein, is the exclusive property of Verlinde S.A. and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A. Copyright (2010) Verlinde S.A. All rights reserved.

11/2011

EUROSTYLE2 IMPORTANTFrame classification also acc. to FEM 1.001: A4 (Q4 & U2, Q3 & U3, Q2 & U4)

TECHNICAL GUIDE4/42

Frame classification according to EN13001-1. Base calculations during development phase have been made acc. to Q5 & U2 (full load spectrum and 63.000 cycles). These Jib cranes can also be used for Q4 & U3, Q3 & U4 and Q2 & U5. Linear movements Dlin3 (R>4 m) and Dlin2 (R8

TECHNICAL GUIDE5/42

Note! These cranes can be used only with chain hoist.

This document and the information contained herein, is the exclusive property of Verlinde S.A. and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A. Copyright (2010) Verlinde S.A. All rights reserved.

11/2011

EUROSTYLE3 ADJUSTABLE CONSOLE BEARING

TECHNICAL GUIDE6/42

Konecranes introduces an adjustable console bearing for jib crane range as standard product feature. This makes horizontal beam adjustment easier, improving significantly usability of the crane comparing with existing jib crane products in the markets. Increased safety: uncontrolled trolley and jib beam movements are minimized with simple and easy adjustment.

Short downtime: installation and possible relocation of jib crane can be done in shorter time, without compromising with function of the crane.

This document and the information contained herein, is the exclusive property of Verlinde S.A. and represents a non-public, confidential and proprietary trade secret that may not be reproduced, disclosed to third parties, altered or otherwise employed in any manner whatsoever without the express written consent of Verlinde S.A. Copyright (2010) Verlinde S.A. All rights reserved.

11/2011

EUROSTYLE44.1 180 Manual slewingMode of slewing: Slewing is carried out on a smooth bearing with a self lubricating ring. Fixing:

TECHNICAL GUIDE7/42

OVER BRACED WALL MOUNTED JIB CRANE 180, UKA PROFILE

Brackets are secured by HR, M24 bolts, class 10.9 (not delivered with standard package). Tightening of the bolts must be achieved by using torque wrench. Tightening torque: 903 Nm Supplied with: Hoist trolley Flat cable feeding line wit