Upload
phungliem
View
713
Download
32
Embed Size (px)
Citation preview
1
PRODUCTS INCLUDED:CR(E)CRI(E)TP(E)DKP/APCH/CHiJPMQSPUPE/Magna
Grundfos Pump Repair KitsPrice List October 2016
Category 4A
PLEASE NOTE THE FOLLOWING FROM OUR TERMS AND CONDITIONS OF SALE: A copy of our full terms and conditions are available at the back of this price list
All prices are delivered at place (DAP) and subject to VAT at the standard rate. MINIMUM ORDER VALUE Our minimum order value is £55.00 NET. Orders between the minimum order value and the low order threshold of £335.00 NET for pumps or £130.00 NET for Category 4 items will be subject to a £37.00 NET handling fee.
EXPRESS OPTIONS ‐ DELIVERY CHARGES Grundfos offers choices for next day delivery. The following options are available: INTERSPEED (PER ITEM) (above 250 Kgs – subject to transport availability and an additional cost) • CR(I)(E), CRN(E) Vertical Multistage • Non‐stock SP/SPA models (with or without drop cable cut in 5 metre increments. Please note; Resin cable joint will take 24hrs to set) • Order must be received by 10.45am – despatch same day, delivery next working day – UK (note restrictions apply*) COST ‐ £69.00 NET (PER ITEM) BOXSPEED (PER ITEM) ‐ UK Stocked Items (above 250 Kgs – subject to transport availability and an additional cost) • ALPHA, UPS, UPN, UPS2 Circulators • Magna (D) Glandless Circulators • UP/UPS/Magna Replacement Heads/Terminal boxes (not stocked in the UK) • TPE(D), NB(E) Glanded • CM, CME Horizontal Multistage • JP, MQ, KP, CC and Tanks/Vessels (up to 500 Litre) • CMB(E), Boosters • AP, SL1, SLV, Unilift Waste Water Products • SQ, SQE, SB(A), SP2A, 3A & 5A >1.5kW (without drop cable) • Motors • Flanges & Unions • Pump Components •Chamber Stacks (not stocked in the UK) •Order must be received before 14.00pm – despatch same day, delivery next working day – UK (note restrictions apply*) COST ‐ £48.00 NET (PER ITEM) SPARESPEED (PER ITEM) •Only applies to spares kits •Order must be received before 14.00pm – despatch same day, delivery next working day – UK (note restrictions apply*) COST ‐ £36.00 NET (PER ITEM) *Deliveries to the Highlands and offshore UK may take 2 days. NOTE – Grundfos cannot accept any cancellations or amendments once the orders are received. All services are dependent on component or product availability. Grundfos can guarantee despatch or availability for collection same day but cannot guarantee delivery. Deliveries quoted are applicable for most areas in normal circumstance. SPARES STANDARD DELIVERY CHARGE •A £20.00 NET handling fee will be applied, per order, to all orders for spares, pump components, spares kits. •This charge does not apply if SPARESPEED, express service or our online ordering system (EDI), and/or Extranet are used for order placement. PRODUCT RETURNS FEE •On receipt of written agreement from Grundfos, items can be returned and will be subject to a minimum 35% restocking fee. Goods must be returned in their original packaging and within 6 months of date of despatch. All returns will be subject to inspection, to ascertain age, condition and product type and can incur an increased restocking charge. Please contact [email protected] with the original purchase order, to arrange collection. •Do not send items to Grundfos as they will be refused delivery, collection will be arranged. •Exclusions to Product Returns apply:‐ • Items with a NET value of £125.00 (per item) or less.
• Pump Repair Kits, Power Cable, Engineered to Order, 3rd party sourced and obsolete product cannot be returned for credit.
STORAGE CHARGE •There will be a 2% storage charge of the item invoice value, payable per month, commencing one month from the date the goods were available for delivery from Grundfos. WARRANTY PERIOD •Grundfos pumps are warranted for 24 months from installation or 30 months from manufacture; whichever is the sooner. • A Five Year Warranty covers manufacturing or material defects on domestic heating circulators (UPS2 and ALPHA2 series) purchased from 1st January 2014 (PC 1401). SERVICE AND COMMISSIONING Grundfos Service offers a full range of service, repair and commissioning. Please contact Grundfos Service directly on 01942 263628.
Page
VERTICAL MULTI‐STAGE CP / CPK 5
CR / CRI / CRN 6
CRT 11
SINGLE‐STAGE IN‐LINE & END‐SUCTION CLM / CDM / CLP 12
LM / LP / NM / NP 12
TP 13
UMT / UPT 14
UMTD / UPTD 14
SUBMERSIBLE DRAINAGE AP 15
KP 15
UNILIFT CC 15
WASTEWATER S LINE (SARLIN) 16
HORIZONTAL MULTI‐STAGE CM 16
CH / CHI 17
HORIZONTAL SELF‐PRIMING JP 17
DOMESTIC BOOSTER MQ 17
BOREHOLE SUBMERSIBLE SP 18
SAMPLING SUBMERSIBLE MP1 20
COOLING IMMERSIBLES CHK 20
CRK 21
SPK 21
MTR 22
SHOWER PUMPS AND SOLOLIFT 2 23
PUMP HEADS AND TERMINAL BOXES UPC / UMC / UPS 24
UPS ACCESSORIES 25
PUMP HEADS AND TERMINAL BOXES UPE / MAGNA 26
MAGNA 1 27
MAGNA 3 32
BOOSTER SETS (pfu 2000 ) 34
CHAMBER STACK FOR VERTICAL MULTISTAGE CR(I)(N) 1 35
CR(N) 2 36
CR(I)(N) 3 37
CR(N) 4 38
CR(I) 5 39
CRN 5 40
CR(N) 8 41
CR(I)(N) 10 42
CR(I)(N) 15 43
CR(N) 16 44
CR(I)(N) 20 45
CR(N) 30 46
CR 32 47
CR 45 48
CR(N) 60 49
CR 64 50
CR 90‐CR120‐CR150 51
INDEX
PUMP REPAIR KITS
Product Code Description £
CP2 MODEL 985140 CP2 SHAFT SEAL AND GASKET KIT ‐ STANDARD ON ALL MODELS 355
CP3 MODEL
96549650 CP3 SHAFT SEAL AND GASKET KIT (ALL MODELS) 193
CP3 MODEL (COLD WATER)315413 CP3 ‐ 10 TO 60 WEAR PARTS KIT 341
315414 CP3 ‐ 80 TO 120 WEAR PARTS KIT 544
All other parts obsolete
CP8 MODEL96549654 CP8 SHAFT SEAL AND GASKET KIT (ALL MODELS) 254
CP8 MODEL (HOT WATER) 'K'325252 CP8 ‐ 10 TO 40 WEAR PARTS KIT 289
325253 CP8 ‐ 50 TO 100 WEAR PARTS KIT OBSOLETE
325254 CP8 ‐ 120 TO 200 WEAR PARTS KIT OBSOLETE
CR / CRI / CRN MODEL 1 & 396455085 SHAFT SEAL KIT (HUUV) 251
96455084 SHAFT SEAL KIT (HUUE) 244
96455087 SHAFT SEAL KIT (HQQV) ‐ STANDARD 252
96455086 SHAFT SEAL KIT (HQQE) 245
CR / CRI / CRN MODEL 1 & 396455091 GASKET KIT FKM (VITON) ‐ STANDARD 109
96455090 GASKET KIT EPDM 66
CR1 and CR3 Pump
October 2016Page 5
PUMP REPAIR KITS
Product Code Description £
CR / CRI / CRN 1/3 MODEL96455095 WEAR PARTS KIT ‐ UP TO 9 STAGES 233
96455092 WEAR PARTS KIT ‐ 10‐19 STAGES 270
96455093 WEAR PARTS KIT ‐ 21‐27 STAGES 376
96455094 WEAR PARTS KIT ‐ 30‐36 STAGES 471
CR2 MODEL405009 CR2 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) ‐ AUUE/V 198
405096 CR2 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) ‐ BUBE 126
405097 CR2 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 124
405098 CR2‐ 20 TO 90 WEAR PARTS KIT 229
405099 CR2‐ 110 TO 180 WEAR PARTS KIT 286
405100 CR2‐ 220 TO 260 WEAR PARTS KIT 337
CRN2 MODEL985205 CRN2 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) ‐ AUUE/V 184
405096 CRN2 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) ‐ BUBE 126
405097 CRN2 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 124
405130 CRN2‐ 20 TO 90 WEAR PARTS KIT 212
405131 CRN2‐ 110 TO 150 WEAR PARTS KIT 284
405158 CRN2‐ 180 WEAR PARTS KIT 357
405132 CRN2‐ 220 TO 260 WEAR PARTS KIT 415
CR4 985202 CR4 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) ‐ AUUE/V 221
405096 CR4 SHAFT SEAL AND GASKET KIT ( EPDM BELLOWS TYPE) ‐ BUBE 126
405097 CR4 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 124
415286 CR4 ‐ 10 TO 60 WEAR PARTS KIT 242
415287 CR4 ‐ 70 TO 120 WEAR PARTS KIT 256
415349 CR4 ‐ 140 TO 160 WEAR PARTS KIT 304
415288 CR4 ‐ 190 TO 220 WEAR PARTS KIT 371
CRN4 985205 CRN4 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) ‐ AUUE/V 184
405096 CRN4 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) ‐ BUBE 126
405097 CRN4 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 124
415289 CRN4 ‐ 10 TO 60 WEAR PARTS KIT 198
415290 CRN4 ‐ 70 TO 120 WEAR PARTS KIT 242
415331 CRN4‐ 140 TO 160 WEAR PARTS KIT 341
415291 CRN4 ‐ 190 TO 220 WEAR PARTS KIT 457
CR / CRI / CRN MODEL 596455085 SHAFT SEAL KIT (HUUV) 251
96455084 SHAFT SEAL KIT (HUUE) 244
96455087 SHAFT SEAL KIT (HQQV) ‐ STANDARD 252
96455086 SHAFT SEAL KIT (HQQE) 245
October 2016Page 6
PUMP REPAIR KITS
Product Code Description £
CR / CRI / CRN 596455091 GASKET KIT FKM (VITON) - STANDARD 109
96455090 GASKET KIT EPDM 66
CR / CRI / CRN 596455096 WEAR PARTS KIT - UP TO 7 STAGES 221
96455097 WEAR PARTS KIT - 8-12 STAGES 267
96455098 WEAR PARTS KIT - 13-16 STAGES 363
96455099 WEAR PARTS KIT - 18-22 STAGES 447
96455101 WEAR PARTS KIT - 24-26 STAGES 403
96455100 WEAR PARTS KIT - 29-36 STAGES 563
CR / CRI / CRN 1096511845 SHAFT SEAL KIT HQQV STANDARD 222
96511844 SHAFT SEAL KIT HQQE 217
96509610 GASKET KIT FKM (VITON) STANDARD 166
96509609 GASKET KIT EPDM 122
96511889 WEAR PARTS KIT - UP TO 8 STAGES 249
96511922 WEAR PARTS KIT - 9-14 STAGES 352
96511925 WEAR PARTS KIT - 16-22 STAGES 454
CR / CRI / CRN 1596511845 SHAFT SEAL KIT HQQV STANDARD 222
96511844 SHAFT SEAL KIT HQQE 217
96509610 GASKET KIT FKM (VITON) STANDARD 166
96509609 GASKET KIT EPDM 122
96511824 WEAR PARTS KIT - UP TO 6 STAGES 278
96511827 WEAR PARTS KIT - 7-10 STAGES 377
96511830 WEAR PARTS KIT - 12-17 STAGES 477
CR / CRI / CRN 2096511845 SHAFT SEAL KIT HQQV STANDARD 222
96511844 SHAFT SEAL KIT HQQE 217
96509610 GASKET KIT FKM (VITON) STANDARD 166
96509609 GASKET KIT EPDM 122
96511824 WEAR PARTS KIT - UP TO 6 STAGES 278
96511827 WEAR PARTS KIT - 7-10 STAGES 377
96511830 WEAR PARTS KIT - 12-17 STAGES 477
October 2016Page 7
PUMP REPAIR KITS
Product Code Description £
CR8985204 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) AUUE / V 219
425062 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) ‐ BUBE 157
425063 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 171
425066 CR8 ‐ 10 TO 60 WEAR PARTS KIT 286
425067 CR8 ‐ 80 TO 120 WEAR PARTS KIT 384
425068 CR8 ‐ 140 TO 200 WEAR PARTS KIT 518
CRN8985204 CRN8 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) AUUE / V 219
425062 CRN8 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) ‐ BUBE 157
425063 CRN8 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 171
425069 CRN8 ‐ 10 TO 60 WEAR PARTS KIT 274
425070 CRN8 ‐ 80 WEAR PARTS KIT 387
425266 CRN8 ‐ 100 TO 140 WEAR PARTS KIT 459
425071 CRN8 ‐ 160 TO 200 WEAR PARTS KIT 574
CR16 985204 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) ‐ AUUE/V 219
425062 SHAFT SEAL AND GASKET KIT ( EPDM BELLOWS TYPE) ‐ BUBE 157
425063 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 171
335078 CR16 ‐ 20 TO 60 WEAR PARTS KIT 319
335079 CR16 ‐ 70 TO 100 WEAR PARTS KIT 441
335080 CR16 ‐ 120 TO 160 WEAR PARTS KIT 594
CRN16 985204 SHAFT SEAL AND GASKET KIT (STANDARD TYPE) ‐ AUUE/V 219
425062 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) ‐ BUBE 157
425063 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) ‐ BUBV 171
335081 CRN16 ‐ 20 TO 60 WEAR PARTS KIT 333
335082 CRN16 ‐ 70 TO 80 WEAR PARTS KIT 470
335126 CRN16 ‐ 100 WEAR PARTS KIT 716
335083 CRN16 ‐ 120 TO 160 WEAR PARTS KIT 700
CR 8 Pump
October 2016Page 8
PUMP REPAIR KITS
Product Code Description £
CR30 AND CR60 MODEL A (Cone & Nut version ) Seal and gasket kit only available
345015 CR30 AND CR60 SHAFT SEAL AND GASKET KIT ‐ AUUE/V STANDARD 265
CR30 AND CR60 MODEL B 345122 CR30/60 MECH SHAFT SEAL AND GASKET KIT AUUE/V 319
345180 CR30/60 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS TYPE) BBUE 249
345181 CR30/60 SHAFT SEAL AND GASKET KIT (VITON BELLOWS TYPE) BBUV 281
CR30 AND CR60 MODEL B 345199 CR30 ‐ 10 TO 50 WEAR PARTS KIT 618
345200 CR30 ‐ 60 TO 80 WEAR PARTS KIT 954
345201 CR30 ‐ 90 TO 110 WEAR PARTS KIT 1,028
345202 CR30 ‐ 120 TO 130 WEAR PARTS KIT 1,075
345203 CR30 ‐ 140 TO 160 WEAR PARTS KIT 1,145
365103 CR60 ‐ 20 TO 60 WEAR PARTS KIT 650
365104 CR60 ‐ 70 TO 80 WEAR PARTS KIT 857
CRN30 AND CRN60 345111 CRN30/60 MECH SHAFT SEAL AND GASKET KIT AUUE/V 318
345208 CRN30/60 SHAFT SEAL AND GASKET KIT (EPDM BELLOWS) BBUE 446
345209 CRN30/60 SHAFT SEAL AND GASKET KIT (VITON BELLOWS) BBUV 475
CRN30 345189 CRN30 WEAR PARTS KIT 1 ‐ 5 STAGES 754
345190 CRN30 WEAR PARTS KIT 6 ‐ 8 STAGES 1,100
345191 CRN30 WEAR PARTS KIT 9 ‐ 11 STAGES 1,152
345192 CRN30 WEAR PARTS KIT 12 ‐ 13 STAGES 1,183
345193 CRN30 WEAR PARTS KIT 14 ‐ 16 STAGES 1,230
CRN60 365111 CRN60 WEAR PARTS KIT 2 ‐ 6 STAGES 844
365112 CRN60 WEAR PARTS KIT 7 ‐ 8 STAGES 1,082
CR(N)32, 45, 64, & 90 ALL MODELS96525490 SHAFT SEAL HQQV ‐ STANDARD 242
96525458 SHAFT SEAL HQQE 242
96416580 BOTTOM BEARING KIT 218
Please note old seal types and new alternatives on CR Pumps
EUHE EUBVEUBE EUUVEUUE EQQVEQQE Now use HQQE EUHV Now use HQQV
October 2016Page 9
PUMP REPAIR KITS
Product Code Description £
CR(N)32 MODEL 96416728 CR32 1 ‐ 2 STAGE WEAR PARTS KIT 133
96416729 CR32 3 ‐ 7 STAGE WEAR PARTS KIT 317
96416730 CR32 8 ‐ 11 STAGE WEAR PARTS KIT 442
96416731 CR32 12 ‐ 14 STAGE WEAR PARTS KIT 524
96416574 CR32 3 ‐ 7 STAGE INTERMEDIATE BEARING KIT 146
96416576 CR32 8 ‐ 14 STAGE INTERMEDIATE BEARING KIT 230
96416597 CR32 GASKET KIT (EPDM) 96
96416598 CR32 GASKET KIT (FKM) STANDARD 164
CR(N)45 96416732 CR45 1 ‐ 2 STAGE WEAR PARTS KIT 137
96416733 CR45 3 ‐ 7 STAGE WEAR PARTS KIT 327
96416734 CR45 8 ‐ 10 STAGE WEAR PARTS KIT 429
96472046 CR45 11‐13 STAGE WEAR PARTS KIT 516
96416577 CR45 3 ‐ 7 STAGE INTERMEDIATE BEARING KIT 161
96416578 CR45 8 ‐ 13 STAGE INTERMEDIATE BEARING KIT 257
96416599 CR45 GASKET KIT (EPDM) 116
96416600 CR45 GASKET KIT (FKM) STANDARD 190
CR(N)64 96416735 CR64 1 ‐ 2 STAGE WEAR PARTS KIT 147
96416736 CR64 3 ‐ 8 STAGE WEAR PARTS KIT 387
96416573 CR64 3 ‐ 8 STAGE INTERMEDIATE BEARING KIT 177
96416599 CR64 GASKET KIT (EPDM) 116
96416600 CR64 GASKET KIT (FKM) STANDARD 190
CR(N)90 96416737 CR90 1 ‐ 2 STAGE WEAR PARTS KIT 150
96416738 CR90 3 ‐ 6 STAGE WEAR PARTS KIT 328
96416579 CR90 3 ‐ 6 STAGE INTERMEDIATE BEARING KIT 179
96416601 CR90 GASKET KIT (EPDM) 135
96416602 CR90 GASKET KIT (FKM) STANDARD 230
CR12096525490 SHAFT SEAL HQQV 242
95059801 SHAFT SEAL HBQV 904
95059806 CR120 ‐ 1 WEAR PART KIT 211
95059807 CR120 ‐ 2 TO 4 WEAR PART KIT 511
95059808 CR120 ‐ 5 TO 7 WEAR PART KIT 785
95059805 CR120 GASKET KIT FKM 102
CR15096525490 SHAFT SEAL HQQV 242
95059801 SHAFT SEAL HBQV 904
95059809 CR150 ‐ 1 WEAR PART KIT 204
95059810 CR150 ‐ 2 TO 3 WEAR PART KIT 433
95059811 CR150 ‐ 4 to 6 WEAR PART KIT 745
95059805 CR150 GASKET KIT FKM 102
October 2016Page 10
PUMP REPAIR KITS
Product Code Description £
CRT2 BEFORE SERIAL NUMBER 0336405346 AUUE SHAFT SEAL 280
405349 AUUV SHAFT SEAL 237
CRT2 AFTER SERIAL NUMBER 033596513598 AUUE SHAFT SEAL 204
96513599 AUUV SHAFT SEAL 223
CRT4 BEFORE SERIAL NUMBER 0336405346 AUUE SHAFT SEAL 280
405349 AUUV SHAFT SEAL 237
CRT4 AFTER SERIAL NUMBER 033596513598 AUUE SHAFT SEAL 204
96513599 AUUV SHAFT SEAL 223
CRT8 BEFORE SERIAL NUMBER 0405425303 AUUE SHAFT SEAL 368
425304 AUUV SHAFT SEAL 341
CRT8 AFTER SERIAL NUMBER 040496521638 AUUE SHAFT SEAL 275
96521639 AUUV SHAFT SEAL 300
CRT16 BEFORE SERIAL NUMBER 0405425303 AUUE SHAFT SEAL 368
425304 AUUV SHAFT SEAL 341
CRT16 AFTER SERIAL NUMBER 040496521638 AUUE SHAFT SEAL 275
96521639 AUUV SHAFT SEAL 300
October 2016Page 11
PUMP REPAIR KITS
Product Code Description £
CLM / CLP / CDM / CDP MODEL A ‐ SMOOTH BASES0608156 CLM100 & CLM125 .32MM SHAFT SEAL (BAQE) 474
S0608156 CDM125 & CDM150 .32MM SHAFT SEAL (BAQE) 474
S0608156 CLP65 & 80 MIN. 11KW . 32MM SHAFT SEAL (BAQE) 474
S0608158 CLM150 & CLM200 .45MM SHAFT SEAL (BAQE) 804
S0608158 CDM200 & CDM210 .45MM SHAFT SEAL (BAQE) 804
S0608158 CLP100 . 45MM SHAFT SEAL (BAQE) 804
S0608156 CDP80 FROM 11KW AND 100 474
S0608158 CDP125 804
CLM / CLP / CDM MODEL B ‐ RIBBED BASES0810108 CLM100 & CLM125 .33MM SHAFT SEAL (BBUE) 462
S0810108 CDM125 & CDM150 .33MM SHAFT SEAL (BBUE) 462
S0810109 CLM150 & CLM200 .45MM SHAFT SEAL (BBUE) 684
S0810109 CDM200 & CDM210 .45MM SHAFT SEAL (BBUE) 684
LM / LP / NM / NP 485113 SHAFT SEAL AND GASKET KIT 16MM O RING TYPE (EPDM) AUUE 298
485351 SHAFT SEAL AND GASKET KIT 16MM BELLOWS (EPDM) BUBE STANDARD 193
985845 SHAFT SEAL AND GASKET KIT 16MM SPECIAL FOR GLYCOL / CHILLED WATER RUUE/V 265
485114 SHAFT SEAL AND GASKET KIT 22MM O RING TYPE (EPDM) AUUE 329
485278 SHAFT SEAL AND GASKET KIT 22MM BELLOWS (EPDM) BBUE STANDARD 347
985909 SHAFT SEAL AND GASKET KIT 22MM SPECIAL FOR GLYCOL / CHILLED WATER RUUE/V 295
485353 SHAFT SEAL AND GASKET KIT 33MM O RING TYPE (EPDM BELLOWS) BBUE STD 625
985624 SHAFT SEAL AND GASKET KIT 33MM SPECIAL FOR GLYCOL / CHILLED WATER GQQE 1,910
485125 WEAR PARTS KIT 16MM (AUUE) CONTAINS SHAFT SEAL AND SHAFT 319
485122 WEAR PARTS KIT 22MM (AUUE) CONTAINS SHAFT SEAL AND SHAFT 561
485352 WEAR PARTS KIT 16MM (BUBE) CONTAINS SHAFT SEAL AND SHAFT STANDARD 302
485279 WEAR PARTS KIT 22MM (BBBE) CONTAINS SHAFT SEAL AND SHAFT BBUE 503
485354 WEAR PARTS KIT 33MM (BUBE) CONTAINS SHAFT SEAL AND SHAFT BBUE 986
485449 WEAR PARTS KIT 33MM (BUUE) CONTAINS SHAFT SEAL AND SHAFT 1,060
CDM with ribbed base
October 2016Page 12
PUMP REPAIR KITS
Product Code Description £
TP MODEL96409293 SHAFT SEAL KIT FOR (BUBE) 12MM ‐ STANDARD 113
96421210 SHAFT SEAL KIT FOR (BUUE) 12MM 214
96421212 SHAFT SEAL KIT FOR (GUUE) 12MM 227
96488632 SHAFT SEAL KIT FOR (BQQE) 12MM 220
96488634 SHAFT SEAL KIT FOR (BQQV) 12MM 238
96409263 SHAFT SEAL KIT FOR (BUBE) 12MM ‐ STANDARD 158
96409264 SHAFT SEAL KIT FOR (AUUE) 12MM 180
96432881 SHAFT SEAL KIT FOR (RUUE/V) 12MM 174
96409265 SHAFT SEAL KIT FOR (BUBE) 16MM ‐ STANDARD 180
96409266 SHAFT SEAL KIT FOR (AUUE) 16MM 228
985844 SHAFT SEAL KIT FOR (RUUE/V) 16MM 155
TP ‐ 2 POLE96408792 WEAR PARTS KIT ‐ TP32/50/2 AND TP40/50/2 POA
96408793 WEAR PARTS KIT ‐ TP32/90/2 AND TP40/90/2 POA
96408791 WEAR PARTS KIT ‐ TP25/90/2 POA
96414029 WEAR PARTS KIT ‐ TP32/60/2 221
96409269 WEAR PARTS KIT ‐ TP65/12/2 / TP65/160/2 / TP80/240/2 AND TP100/160/2 222
96414028 WEAR PARTS KIT ‐ TP32/120/2 / TP32/80/2 AND TP32/160/2 197
96414031 WEAR PARTS KIT ‐ TP32/150/2 / TP32/180‐330/2 / TP40/160‐390/2 / 201
96414028 WEAR PARTS KIT ‐ TP40/60‐120/2 / TP50/60‐80/2 / TP65/60‐80/2 AND TP100/120/2 197
TP ‐ 4 POLE96414027 WEAR PARTS KIT ‐ TP32/30/4 AND TP40/30/4 264
96409269 WEAR PARTS KIT ‐ TP80/40‐80/4 AND TP100/30‐160/4 222
96414031 WEAR PARTS KIT ‐ TP32/40‐60/2 / TP40/80/4 / TP50/60‐80/4 AND TP65/30‐80/4 201
96414028 WEAR PARTS KIT ‐ TP50/30/4 AND TP50/40/4 197
TP 50‐60 TPD 40‐190
October 2016Page 13
PUMP REPAIR KITS
Product Code Description £
TP(D) MODELS WITH INTEGRATED SHAFT / COUPLING96488302 SHAFT SEAL KIT FOR (BAQE) 112
96488303 SHAFT SEAL KIT FOR (GQQE) 182
98434904 SHAFT SEAL KIT FOR (BQQE) 136
SHAFT KIT ‐ 4 POLE96039349 TP32/80‐120/4 317
96039350 TP32/130‐140/4 / TP40/100‐130/4 / TP50/90‐110/4 AND TP65/90/4 333
96039351 TP32/190/4 / TP40/160‐190/4 / TP50/120‐160/4 AND TP65/110‐130/4 341
96039352 TP40/220/4 / TP50/190‐270/4 AND TP65/150‐240/4 354
96039353 TP50/340/4 AND TP 65/280/4 406
96039354 TP65/330/4 456
SHAFT KIT ‐ 2 POLE96039350 TP32/270/2 AND TP50/160/2 333
96039351 TP32/300‐370/2 / TP40/280/2 / TP50/190‐240/2 AND TP65/190/2 341
96039352 TP32/380‐510/2 / TP40/300‐420/2 / TP50/280‐360/2 AND TP65/220‐260/2 354
96039353 TP32/550‐640/2 / TP40/470‐600/2 / TP50/410‐480/2 AND TP65/340‐410/2 406
96039354 TP32/770/2 / TP40/740‐930/2 / TP50/540‐830/2 AND TP65/450‐630/2 456
96039355 TP50/900‐960/2 AND TP 65/740/2 505
96039356 TP50/1080/2 AND TP65/880‐1050/2 536
UMT(D) / UPT(D) 495063 SHAFT SEAL KIT MODEL B,C,D (MECHANICAL) 16MM ‐ AUUE STANDARD 302
495078 SHAFT SEAL KIT MODEL B,C,D (BELLOWS) 16MM ‐ BUBE 232
985844 SHAFT SEAL KIT FOR GLYCOL / CHILLED WATER 16MM ‐ RUUE/V 155
495067 UPT 25/32/40 ‐ 50 / 40 ‐ 90 SEAL MODEL A,B ( BELLOWS) 12MM ‐ CVBE/V 158
UMT(D) / UPT(D) 495064 WEAR PARTS KIT MODEL B,C,D (AUUE) 16mm 413
Please check Grundfos Product Centre for complete pump service drawings
October 2016Page 14
PUMP REPAIR KITS
Product Code Description £
AP WASTE WATER MODELS96427804 All AP12, 35, 50 SHAFT SEAL (NBR) ‐ STANDARD 162
96426650 All AP12, 35, 50 SHAFT SEAL (VITON) 251
96548101 AP12 Float Switch 0.7m 172
AP35B / AP50B WASTE WATER96429307 SHAFT SEAL KIT (NBR) STANDARD 143
96429308 SHAFT SEAL KIT (VITON) 182
96429309 AUTOMATIC CABLE ENTRY REPAIR KIT 111
96429310 MANUAL CABLE ENTRY REPAIR KIT 138
APG WASTE WATER GRINDER MODELS(MODEL A) (MODEL B) Model A £ 50 Hz Model B
96003308 96007169 245 WEAR PARTS KIT APG 50.09 AND APG 50.11 418
96003696 96007178 577 WEAR PARTS KIT APG 50.09 Ex AND APG 50.11Ex 1,077
96003309 96007170 386 WEAR PARTS KIT APG 50.17 AND APG 50.18 AND APG 50.19 683
96003310 96007171 519 WEAR PARTS KIT APG 50.19.3 Ex AND APG 50.31.3 Ex 813
96003311 96007172 523 WEAR PARTS KIT APG 50.31 456
96005498 WEAR PARTS KIT APG 50.48.3 Ex AND APG 50.65.3 Ex AND APG50 92.3 Ex 901
96005499 WEAR PARTS KIT APG 50.48.3 Ex AND APG 50.65.3 Ex AND APG50 92.3 Ex* 833
* Pump with moisture switch
KP 10757 CABLE SOCKET SPANNER, KP 18
15778 KP150 IMPELLER KIT 39
15779 KP250 IMPELLER KIT 38
16723 KP150, KP250 KP350 Motor Cable with Float Switch 10m 110
16724 KP150, KP250 KP350 Motor Cable with Float Switch 5m 79
16725 Kit, Motor cable ‐No float 5m 81
16726 Motor Cable no float 10m 78
16739 KP150, KP250 Motor Cable with Vertical Float Switch 5m 158
15220 Non‐Return Valve (single) 42
15221 Non‐Return Valve (pack 10) 278
UNILIFT CC 5,7,996578967 CC5 IMPELLER KITS 32
96578968 CC7 IMPELLER KITS 33
96578969 CC9 IMPELLER KITS 33
96578970 CC 5/7/9 Float Switch 65
96578973 CC 5 Motor Kit 127
96578974 CC 7 Motor Kit 133
96578975 CC 9 Motor Kit 152
Unilift KP 150 AP 50B Unilift CC 5
October 2016Page 15
PUMP REPAIR KITS
Product Code Description £
GRUNDFOS SARLIN SPARES
Please contact [email protected] direct with pump plate details for Spares enquires
CM / CMEMOD ACM1.3.5
96932350 GASKET & SEAL KIT AVBE/V 82
96932392 GASKET & SEAL KIT AQQE/V 111
CM10,15,25
96932393 GASKET & SEAL KIT AVBE/V 98
96932394 GASKET & SEAL KIT AQQE/V 130
MOD i & GCM1,3,5
96932438 GASKET & SEAL KIT AVBE/V 88
96932440 GASKET & SEAL KIT AQQE/V 116
96932441 GASKET & SEAL KIT AQQK 1,467
CM10,15,20
96932443 GASKET & SEAL KIT AVBE/V 95
96932445 GASKET & SEAL KIT AQQE/V 129
96932446 GASKET & SEAL KIT AQQK 1,499
DRAIN/FILL PLUG KIT ALL CM96932395 EPDM AND VITON 56
96932396 FFKM 178
October 2016Page 16
Product Code Description £
CH2 CH4 985164 CH2 / 4 SHAFT SEAL KIT ‐ CVBE/V 67
96586305 CH2 / 4 SHAFT SEAL KIT ‐ AQQE/V STANDARD 136
985737 CH2 / 4 SPECIAL SEAL FOR GLYCOL (COLD OR CHILLED WATER) RUUE/V 111
985848 CH2 / 4 SHAFT SEAL KIT AUUE/V 113
435002 CH2 ‐ 20 TO 50 OVERHAUL KIT 67
435039 CH2 ‐ 60 OVERHAUL KIT 136
445004 CH4 ‐ 20 TO 40 OVERHAUL KIT 60
445017 CH4 ‐ 50 TO 60 OVERHAUL KIT 143
CH8 / CH12 MODEL A AND B004N5012 CH8 / 12 SHAFT SEAL KIT CVBE/V 82
96586306 CH8 / 12 SHAFT SEAL KIT AQQE/V STANDARD 134
004N5013 CH8 / 12 SHAFT SEAL KIT CVBE/V 103
CHI(E) 2 / CHI(E) 4 004H5009 CHI 2 / 4 OVERHAUL KIT AND SHAFT SEAL WITH EPDM BUBE 163
004H5010 CHI 2 / 4 OVERHAUL KIT AND SHAFT SEAL WITH VITON BUBV 212
004H5007 CHI 2 / 4 OVERHAUL KIT AND SHAFT SEAL WITH EPDM BQQE 168
004H5008 CHI 2 / 4 OVERHAUL KIT AND SHAFT SEAL WITH VITON BQQV 142
CHI(E) 8 / CHI(E) 10 / CHI(E) 12004F5012 CHI 8 / 12 OVERHAUL KIT AND SHAFT SEAL 16MM EPDM BQQE 201
004F5013 CHI 8 / 12 OVERHAUL KIT AND SHAFT SEAL 16MM VITON BQQV STANDARD 159
JP5 MODEL B & D96768182 SHAFT SEAL 31
96768180 0.RING GASKETS.PLUG 28
96768184 SMALL COMPONENTS/EJECTOR 86
JP6 MODEL B & D96768182 SHAFT SEAL 31
96768180 0.RING GASKETS.PLUG 28
96768185 SMALL COMPONENTS/EJECTOR 86
MQ 96450696 SHAFT SEAL KIT 95
96526628 O RING KIT 92
96525909 HYDRAULIC KIT (ALL MODELS 50 Hz) 212
96577720 FITTINGS KIT (G1") INCLUDES N.R.VALVE 69
96634763 FITTINGS KIT (NPT 1") INCLUDES N.R. VALVE 45
96526653 PRESSURE SWITCH 79
96488398 END COVER 108
96450697 CLAMP KIT 100
96450698 FLOW SENSOR KIT 82
96488399 TERMINAL BOX CONNECTION 66
96488403 TANK 152
96526663 INTERNAL NON RETURN VALVE KIT 47
96525934 ELECTRONIC PARTS KIT 240V 266
96590742 CAPACITOR 40
PUMP REPAIR KITS
October 2016Page 17
PUMP REPAIR KITS
Product Code Description £
SP1A, SP2A CONE & NUT105059 WEAR PARTS KIT 31‐39 STAGE ROUND SHAFT PUMP 138
95059 WEAR PARTS KIT 40‐48 STAGE ROUND SHAFT PUMP 178
95060 WEAR PARTS KIT49‐60 STAGE ROUND SHAFT PUMP 219
95061 WEAR PARTS KIT 61‐75 STAGE ROUND SHAFT PUMP 256
95062 WEAR PARTS KIT 76‐90 STAGE ROUND SHAFT PUMP 283
SP1A, SP2A SPLINED SHAFT95054 WEAR PARTS KIT 0 ‐ 6 STAGE SPLINE SHAFT PUMP 81
55008 WEAR PARTS KIT 7 ‐ 9 STAGE SPLINE SHAFT PUMP 86
55009 WEAR PARTS KIT 10 ‐ 15 STAGE SPLINE SHAFT PUMP 83
95056 WEAR PARTS KIT 16‐ 21 STAGE SPLINE SHAFT PUMP 103
55010 WEAR PARTS KIT 22 ‐ 26 STAGE SPLINE SHAFT PUMP 103
55011 WEAR PARTS KIT 27‐ 33 STAGE SPLINE SHAFT PUMP 125
SP(N) 3A, SP(N) 5A ROUND SHAFT105543 WEAR PARTS KIT 5 STAGE ROUND SHAFT PUMP 79
105544 WEAR PARTS KIT 10 STAGE ROUND SHAFT PUMP 108
55504 WEAR PARTS KIT 15 STAGE ROUND SHAFT PUMP 127
105546 WEAR PARTS KIT 24 STAGE ROUND SHAFT PUMP 137
105547 WEAR PARTS KIT 30 STAGE ROUND SHAFT PUMP 152
105059 WEAR PARTS KIT 39 STAGE ROUND SHAFT PUMP 138
95059 WEAR PARTS KIT 48 STAGE ROUND SHAFT PUMP 178
95060 WEAR PARTS KIT 60 STAGE ROUND SHAFT PUMP 219
95061 WEAR PARTS KIT 75 STAGE ROUND SHAFT PUMP 256
95062 WEAR PARTS KIT 90 STAGE ROUND SHAFT PUMP 283
SP(N) 3A, SP(N) 5A SLINED SHAFT95054 WEAR PARTS KIT 1‐6 STAGE SPLINE SHAFT PUMP 81
55008 WEAR PARTS KIT 7‐9 STAGE SPLINE SHAFT PUMP 86
55009 WEAR PARTS KIT 10‐15 STAGE SPLINE SHAFT PUMP 83
95056 WEAR PARTS KIT 16‐21 STAGE SPLINE SHAFT PUMP 103
55010 WEAR PARTS KIT 22‐26 STAGE SPLINE SHAFT PUMP 103
55011 WEAR PARTS KIT 27‐33 STAGE SPLINE SHAFT PUMP 125
SP3A‐R, SP5A‐R ROUND SHAFT 105969 WEAR PARTS KIT 5 STAGE ROUND SHAFT PUMP 81
105970 WEAR PARTS KIT 10 STAGE ROUND SHAFT PUMP 84
105971 WEAR PARTS KIT 15 STAGE ROUND SHAFT PUMP 100
105972 WEAR PARTS KIT 24 STAGE ROUND SHAFT PUMP 145
105973 WEAR PARTS KIT 30 STAGE ROUND SHAFT PUMP 127
105974 WEAR PARTS KIT 39 STAGE ROUND SHAFT PUMP 153
105975 WEAR PARTS KIT 48 STAGE ROUND SHAFT PUMP 177
105976 WEAR PARTS KIT 60 STAGE ROUND SHAFT PUMP 206
October 2016Page 18
PUMP REPAIR KITS
Product Code Description £
SP(NE) 3A, SP(NE) 5A MODEL96440231 WEAR PARTS KIT 12 STAGE ROUND SHAFT PUMP 133
96440230 WEAR PARTS KIT 25 STAGE ROUND SHAFT PUMP 172
96440229 WEAR PARTS KIT 33 STAGE ROUND SHAFT PUMP 213
96440228 WEAR PARTS KIT 45 STAGE ROUND SHAFT PUMP 276
96440227 WEAR PARTS KIT 60 STAGE ROUND SHAFT PUMP 296
SP11(A), SP14(A) 75008 WEAR PARTS KIT 5 STAGE ROUND SHAFT PUMP 136
75009 WEAR PARTS KIT 13 STAGE ROUND SHAFT PUMP 267
75010 WEAR PARTS KIT 18 STAGE ROUND SHAFT PUMP 319
75011 WEAR PARTS KIT 25 STAGE ROUND SHAFT PUMP 448
SPN 14A 75507 WEAR PARTS KIT 5 STAGE ROUND SHAFT PUMP 127
75508 WEAR PARTS KIT 13 STAGE ROUND SHAFT PUMP 274
75509 WEAR PARTS KIT 18 STAGE ROUND SHAFT PUMP 334
75510 WEAR PARTS KIT 25 STAGE ROUND SHAFT PUMP 474
SP17, SP17(N), SP17 (R) 96421723 WEAR PARTS KIT 5 STAGE ROUND SHAFTPUMP 218
96421724 WEAR PARTS KIT 16 STAGE ROUND SHAFT PUMP 311
96421725 WEAR PARTS KIT 26 STAGE ROUND SHAFT PUMP 404
96440238 WEAR PARTS KIT 40 STAGE ROUND SHAFT PUMP 532
96488045 WEAR PARTS KIT 50 STAGE ROUND SHAFT PUMP 519
96488046 WEAR PARTS KIT 60 STAGE ROUND SHAFT PUMP 528
SP30, SP30(N), SP30 (R) 96421732 WEAR PARTS KIT 05 STAGE PUMP (STD) 172
96421733 WEAR PARTS KIT 05 STAGE PUMP (N) 305
96421734 WEAR PARTS KIT 16 STAGE PUMP (STD) 375
96440246 WEAR PARTS KIT 16 STAGE PUMP (N) 486
96488047 WEAR PARTS KIT 24 STAGE PUMP (STD) 629
SP46, SP46N 96440248 WEAR PARTS KIT 04 STAGE PUMP 305
96440250 WEAR PARTS KIT 12 STAGE PUMP 351
96440252 WEAR PARTS KIT 18 STAGE PUMP 416
96440254 WEAR PARTS KIT 28 STAGE PUMP 501
96488048 WEAR PARTS KIT 37 STAGE PUMP 497
October 2016Page 19
PUMP REPAIR KITS
Product Code Description £
SP60, SP60N 96440369 WEAR PARTS KIT 06 STAGE PUMP 410
96440371 WEAR PARTS KIT 10 STAGE PUMP 503
96440373 WEAR PARTS KIT 16 STAGE PUMP 571
96440375 WEAR PARTS KIT 22 STAGE PUMP 682
96488049 WEAR PARTS KIT 30 STAGE PUMP 766
SP77, SP77N 96440256 WEAR PARTS KIT 08 STAGE PUMP 325
96440258 WEAR PARTS KIT 14 STAGE PUMP 413
96440260 WEAR PARTS KIT 20 STAGE PUMP 536
SP95, SP95N 96440715 WEAR PARTS KIT 08 STAGE PUMP 412
96440716 WEAR PARTS KIT 14 STAGE PUMP 500
96440717 WEAR PARTS KIT 20 STAGE PUMP 511
SP125, SP125N 96440262 WEAR PARTS KIT 04 STAGE PUMP 231
96440264 WEAR PARTS KIT 06 STAGE PUMP 305
96440266 WEAR PARTS KIT 10 STAGE PUMP 359
96488080 WEAR PARTS KIT 17 STAGE PUMP 354
SP160, SP160N 205117 WEAR PARTS KIT 05 STAGE PUMP 290
205118 WEAR PARTS KIT 09 STAGE PUMP 473
96488081 WEAR PARTS KIT 15 STAGE PUMP 336
SP215, SP215N 185033 WEAR PARTS KIT 02 STAGE PUMP 270
185034 WEAR PARTS KIT 04 STAGE PUMP 313
185035 WEAR PARTS KIT 07 STAGE PUMP 460
185036 WEAR PARTS KIT 10 STAGE PUMP 516
SP 6" MOTOR CABLE95920945 MS6000 cable, 4 G 6mm2, 5m 138
96163690 MS6 Cable 3 x 4 + 1 G 4mm2, 5m 5.5 ‐ 9.2 kw 105
96163691 MS6 Cable 3 x AWG 8 + 1 G AWG 8, 5m 11kw ‐ 30kw 139
MP1 125061 MP1 WEAR PARTS KIT 450
CHK2, CHK4435031 CHK2 / 4 SHAFT SEAL KIT CVBV STANDARD 65
435032 CHK2 OVERHAUL KIT 81
445057 CHK4 OVERHAUL KIT 92
October 2016Page 20
PUMP REPAIR KITS
Product Code Description £
CRK2, CRK4415080 CRK2 / 4 SHAFT SEAL KIT WITH EPDM & VITON AUUV STANDARD 131
415085 CRK2 / 4 SHAFT SEAL KIT VITON BELLOWS BUBV 128
405133 CRK2 ‐ 20 TO 90 WEAR PARTS KIT 131
405134 CRK2 ‐ 110 TO 180 WEAR PARTS KIT 155
405135 CRK2 ‐ 220 TO 260 WEAR PARTS KIT 317
415092 CRK4 ‐ 10 TO 60 WEAR PARTS KIT 193
415093 CRK4 ‐ 70 TO 120 WEAR PARTS KIT 267
415114 CRK4 ‐ 140 TO 160 WEAR PARTS KIT 338
415094 CRK4 ‐ 180 TO 220 WEAR PARTS KIT 275
CRK8, CRK16425089 CRK8 / 16 SHAFT SEAL KIT WITH VITON AUUV STANDARD 172
425090 CRK8 ‐ 1 TO 8 WEAR PARTS KIT 244
425091 CRK8 ‐ 10 TO 14 WEAR PARTS KIT 347
425092 CRK8 ‐ 16 TO 20 WEAR PARTS KIT 351
335091 CRK16 ‐ 1 TO 6 WEAR PARTS KIT 197
335092 CRK16 ‐ 7 TO 10 WEAR PARTS KIT 286
335093 CRK16 ‐ 10 TO 16 WEAR PARTS KIT 390
CRK30, CRK60345294 CRK30 & 60 SHAFT SEAL 306
345290 CRK30 1‐3 585
345291 CRK30 2‐11 WEAR PARTS KIT 593
345292 CRK30 7‐10 WEAR PARTS KIT 758
345293 CRK30 11‐16 WEAR PARTS KIT 812
365196 CRK60 1‐3 WEAR PARTS KIT 416
365197 CRK60 2‐8 WEAR PARTS KIT 623
SPK2, SPK4, SPK8395008 SPK2 / 4 / 8 SHAFT SEAL KIT MODEL B AND C ‐ CVBV STANDARD 70
395090 SPK2 / 4 ‐ 1 TO 8 WEAR PARTS KIT. MODEL C 201
395089 SPK2 / 4 ‐ 9 TO 23 WEAR PARTS KIT. MODEL C 296
395093 SPK8 ‐ 1 ‐ 15 WEAR PARTS KIT ( 1 impeller) 220
395094 SPK8 ‐ 2 ‐ 15 WEAR PARTS KIT ( 2‐3 impellers) 231
395095 SPK8 ‐ 7‐15 WEAR PARTS KIT (5 impellers) 309
395096 SPK8 ‐ 7 ‐ 15 WEAR PARTS KIT ( 7‐9 impellers) 362
395097 SPK8 ‐ 12 TO 15 WEAR PARTS KIT ( 12‐15 impellers) 466
395098 SPK8 ‐ 12 WEAR PARTS KIT (9 impellers) 446
October 2016Page 21
PUMP REPAIR KITS
Product Code Description £
MTR, MTR3, MTR5 SHAFT SEAL96455084 SHAFT SEAL KIT HUUE 244
96455085 SHAFT SEAL KIT HUUV 251
96455086 SHAFT SEAL KIT HQQE 245
96455087 SHAFT SEAL KIT HQQV 252
96533324 SHAFT SEAL KIT HUUK 880
96533326 SHAFT SEAL KIT HQQK 873
MTR1, MTR3 WEAR PARTS KIT96530909 2‐9 STAGES 119
96531000 10‐19 STAGES 161
96531001 20‐27 STAGES 199
96531002 29‐36 STAGES 232
MTR5 WEAR PARTS KIT96531003 2‐7 STAGES 150
96531004 8‐16 STAGES 214
96531006 17‐22 STAGES 240
96531007 24‐32 STAGES 310
PUMP REPAIR KITS
Product Code Description £
MTR10, 15, 20 SHAFT SEAL96511840 SHAFT SEAL KIT HUUE 218
96511841 SHAFT SEAL KIT HUUV 221
96511844 SHAFT SEAL KIT HQQE 217
96511845 SHAFT SEAL KIT HQQV 222
96511842 SHAFT SEAL KIT HUUK 792
96511846 SHAFT SEAL KIT HQQK 790
MTR10 WEAR PARTS KIT96531041 2‐9 STAGES 278
96531042 10‐16 STAGES 390
96531043 18‐22 STAGES 430
MTR 15, 20 WEAR PARTS KIT96531044 2‐9 STAGES 275
96531045 10‐17 STAGES 401
PUMP REPAIR KITS
Product Code Description £
MTR32,45,64 SHAFT SEAL96441768 SHAFT SEAL KIT HUUV 259
96525458 SHAFT SEAL KIT HQQE 242
96525490 SHAFT SEAL KIT HQQV 242
96436727 SHAFT SEAL KIT HUUE 320
96533367 SHAFT SEAL KIT HUUK 1,704
96533369 SHAFT SEAL KIT HQQK 1,688
MTR32 WEAR PARTS KIT96430767 1‐4 STAGES 1‐4 IMPELLERS 233
96491254 5‐8 STAGES 1‐3 IMPELLERS 242
96491255 9‐14 STAGES 1‐3 IMPELLERS 256
96430768 5‐8 STAGES 5‐8 IMPELLERS 402
96491256 9‐14 STAGES 4‐8 IMPELLERS 418
96430769 9‐14 STAGES 9‐12 IMPELLERS 568
MTR45 WEAR PARTS KIT96430773 1‐4 STAGES 1‐4 IMPELLERS 244
96491257 5‐8 STAGES 1‐3 IMPELLERS 249
96491370 9‐12 STAGES 1‐3 IMPELLERS 255
96430775 5‐8 STAGES 4‐8 IMPELLERS 424
96491371 9‐12 STAGES 4‐8 IMPELLERS 429
MTR64 WEAR PARTS KIT96430819 1‐4 STAGES 1‐4 IMPELLERS 242
96491372 5‐8 STAGES 1‐3 IMPELLERS 261
96491373 9‐12 STAGES 1‐3 IMPELLERS 272
96430820 5‐8 STAGES 4‐5 IMPELLERS 367
96491374 9‐12 STAGES 4‐5 IMPELLERS 377
October 2016Page 22
PUMP REPAIR KITS
Product Code Description £
SOLOLIFT2 MODEL WC‐1 WC‐3 CWC‐397775349 Grinder Kit 67
97775341 Motor kit 390
97775344 Pressure Switch Kit 68
97775345 PCB 97
97775374 Capacitor 36
97775370 Carbon Filter pkt 5 13
97775355 Cover, Service WC‐1 WC‐3 46
97775356 Cover Service CWC‐3 48
97775368 Gasket Toilet Connection WC‐1 WC‐3 44
97775369 Gasket Toilet Connection CWC‐3 44
97775350 Impeller 23
97775378 Inlet Adapter WC‐3 CWC‐3 24
97775371 Non Return Valve for outlet 16
97775363 Rubber parts for Inlet WC‐1 34
97775364 Rubber parts for Inlet WC‐3 CWC‐3 37
97775366 Rubber parts for outlet 48
97775377 Supply Cable Schuko 37
97775359 Tank Kit w/o Cover WC‐1 161
97821579 Tank Kit w/o Cover WC‐3 162
97775360 Tank Kit w/o Cover CWC‐3 168
SOLOLIFT2 MODEL C‐3 D‐297775357 Cover, Service C‐2 44
97775358 Cover, Service D‐2 42
97775375 Capacitor 21
97775370 Carbon Filter C‐3 pkt 5 13
97775346 Float Switch C‐3 64
97775352 Impeller C‐3 21
97775354 Impeller D‐2 20
97775378 Adapter with Flap for Horizontal Inlet 24
97775342 Motor & Float Switch Service Kit C‐3 297
97775343 Motor & Float Switch Service Kit D‐2 253
97775351 Motor & O' Ring Only C‐3 181
97775353 Motor & O' Ring Only D‐2 162
97775371 Non Return Valve for outlet 16
97775347 Pressure Switch Kit 64
97775364 Rubber parts for Inlet C‐3 37
97775366 Rubber parts for outlet C‐3 48
97775367 Rubber parts for outlet D‐2 40
97821591 Supply Cable 37
97775361 Tank Kit C‐3 151
97775362 Tank Kit D‐2 97
Sololift2 C‐3
Sololift2 WC‐3
Sololift2 WC‐1
Sololift2 CWC‐3 Sololift2 D‐2
October 2016Page 23
REPLACEMENT PUMP HEADS AND TERMINAL BOXES
Product Code Model £ Product Code Model £
UMC/UPC SERVICE REPLACEMENT PUMP HEADS240v 1Ph 50Hz 415v 3Ph 50Hz
96406320 UPC 40‐60 obsolete 96406321 UPC 40‐60 obsolete
96406322 UPC 40‐120 obsolete 96406323 UPC 40‐120 obsolete
96406324 UMC 50‐60 obsolete 96406325 UMC 50‐60 obsolete
96406328 UPC 50‐120 obsolete 96406329 UPC 50‐120 obsolete
96406330 UMC 65‐60 obsolete 96406331 UMC 65‐60 obsolete
96406334 UPC 65‐120 obsolete 96406335 UPC 65‐120 obsolete
96406336 UMC 80‐60 obsolete
UPC UMC Heads Obsolete single and three phase 96406337 UPC 80‐120 obsolete
Please contact Grundfos sales for new pump option 96406338 UMC 100‐60 obsolete
REPLACEMENT TERMINAL BOXES240v 1Ph 50Hz 415v 3Ph 50Hz
96405853 UPC 40‐60 344 6mf 96404870 UPC 40‐60 335
96405855 UPC 40‐120 344 10mf 96404870 UPC 40‐120 335
96405857 UMC 50‐60 344 14mf 96404870 UMC 50‐60 335
96405859 UPC 50‐120 344 20mf 96404870 UPC 50‐120 335
96405859 UMC 65‐60 344 20mf 96404870 UMC 65‐60 335
96405860 UPC 65‐120 344 25mf 96404870 UPC 65‐120 335
96404870 UMC 80‐60 335
96404870 UPC 80‐120 335
96404870 UMC 100‐60 335
October 2016Page 24
REPLACEMENT PUMP HEADS AND TERMINAL BOXES
Product Code Model £ Product Code Model £
UPS REPLACEMENT PUMP HEADS UPS/UPSD 240v 1Ph 50Hz 415v 3Ph 50Hz
96405977 UPS 32‐30/4 659 96405979 UPS 32‐30/4 659
96405980 UPS 32‐60/2 659 96405984 UPS 32‐60/2 659
96405985 UPS 32‐120/2 659 96405987 UPS 32‐120/2 659
96405988 UPS 40‐30/4 659 96405990 UPS 40‐30/4 659
96405994 UPS 40‐60/2 659 96405996 UPS 40‐60/2 659
96405991 UPS 40‐60/4 767 96405993 UPS 40‐60/4 767
96405997 UPS 40‐120/2 659 96405999 UPS 40‐120/2 659
96406000 UPS 40‐180/2 767 96406001 UPS 40‐180/2 767
96432239 UPS 40‐185/2 767 96432238 UPS 40‐185/2 767
96406002 UPS 50‐30/4 659 96406004 UPS 50‐30/4 659
96406009 UPS 50‐60/2 659 96406013 UPS 50‐60/2 659
96406005 UPS 50‐60/4 767 96406008 UPS 50‐60/4 767
96406015 UPS 50‐120/2 767 96406017 UPS 50‐120/2 767
96406018 UPS 50‐180/2 767 96406019 UPS 50‐180/2 767
96406020 UPS 65‐30/4 659 96406022 UPS 65‐30/4 659
96406026 UPS 65‐60/2 659 96406028 UPS 65‐60/2 659
96406023 UPS 65‐60/4 767 96406025 UPS 65‐60/4 767
96406029 UPS 65‐120/2 767 96406031 UPS 65‐120/2 767
96406032 UPS 65‐180/2 767
96406034 UPS 80‐30/4 767
96406036 UPS 80‐60/4 767
96406038 UPS 80‐120/2 767
96406040 UPS 100‐30/4 767
* UPS circulator pumps with metal ID plate obsolete no spares
October 2016Page 25
REPLACEMENT PUMP HEADS AND TERMINAL BOXES
Product Code Model £ Product Code Model £
REPLACEMENT TERMINAL BOXES UPS/UPSD 240v 1Ph 50Hz 415v 3Ph 50Hz
96405852 UPS 32‐30/4 344 4mf 96404870 UPS 32‐30/4 335
96405853 UPS 32‐60/2 344 6mf 96404870 UPS 32‐60/2 335
96405855 UPS 32‐120/2 344 10mf 96404870 UPS 32‐120/2 335
96405853 UPS 40‐30/4 344 6mf 96404870 UPS 40‐30/4 335
96405854 UPS 40‐60/2 344 8mf 96404870 UPS 40‐60/2 335
96405855 UPS 40‐60/4 344 10mf 96404870 UPS 40‐60/4 335
96405856 UPS 40‐120/2 344 12mf 96404870 UPS 40‐120/2 335
96405860 UPS 40‐180/2 344 25mf 96404870 UPS 40‐180/2 335
96405860 UPS 40‐185/2 344 25mf 96404870 UPS 40‐185/2 335
96405853 UPS 50‐30/4 344 6mf 96404870 UPS 50‐30/4 335
96405855 UPS 50‐60/2 344 10mf 96404870 UPS 50‐60/2 335
96405859 UPS 50‐60/4 344 20mf 96404870 UPS 50‐60/4 335
96405860 UPS 50‐120/2 344 25mf 96404870 UPS 50‐120/2 335
96405861 UPS 50‐180/2 344 30mf 96404870 UPS 50‐180/2 335
96405854 UPS 65‐30/4 344 8mf 96404870 UPS 65‐30/4 335
96405858 UPS 65‐60/2 344 16mf 96404870 UPS 65‐60/2 335
96405859 UPS 65‐60/4 344 20mf 96404870 UPS 65‐60/4 335
96405861 UPS 65‐120/2 344 30mf 96404870 UPS 65‐120/2 335
96404870 UPS 65‐180/2 335
96404870 UPS 80‐30/4 335
96404870 UPS 80‐60/4 335
96404870 UPS 80‐120/2 335
96404870 UPS 100‐30/4 335
LIGHT COMMERCIAL HEADS AND TERMINAL BOX WITH SCREWED CABLE ENTRY TO 2010240v 1ph 50Hz HEADS 240v 1ph 50Hz TERMINAL BOX
52991103 UPS 40‐50F obsolete 98730795 UPS 40‐50F obsolete
52992102 UPS 40‐80F obsolete 98730794 UPS 40‐80F obsolete
52997045 UPSD 32‐50 obsolete 98730797 UPSD 32‐50 obsolete
415v 3ph 50Hz HEADS 415v 3ph 50Hz TERMINAL BOX
52992095 UP 40‐50F 556 98730796 UPS 40‐50F 16
Phase out program on UP40‐50 three phase heads and boxes please check stock, once sold obsolete
Heads and terminal boxes which are not listed these items are now OBSOLETE
ACCESSORIES00SV0181 4mm 29.00 UPS 15‐50 etc
00SV0124 5mm 31.00 UPS 32‐80 40‐50 40‐80
00SV0050 6mm 33.00 UPS 40‐60 40‐120
00SV0051 8mm 38.00 UPS 50‐UPS65‐UPS80‐UPS100
595562 Alpha Plug Kit 25.00
96406940 Body O'Ring Kit 23.00 all large UPS
99200010 Gasket D44/D32x2 15.00 UP 15‐ UP 25 pack 50
96485340 Red Spray Paint 64.00
595406 Flow Switch 43.00 UPA90
October 2016Page 26
REPLACEMENT PUMP HEADS AND TERMINAL BOXES
Product Code Model £ Product Code Model £
UPE REPLACEMENT PUMP HEADS400‐415v 3Ph Model C
96406058 UPE 100‐60 POA
UPE REPLACEMENT PUMP HEADS400‐415v 3Ph Model C
96406058 UPED 100‐60 POA
MAGNA REPLACEMENT TERMINAL BOXES MAGNA SERVICE REPLACEMENT PUMP HEADS230‐240V 1Ph Model E 230‐240V 1Ph Model E
96513647 UPE 32‐120 (F)(FN) POA 96513648 UPE 32‐120 (F)(FN) POA
97752743 UPE 40‐100(F)(F(D) ** POA 96281051 UPE 40‐100(F)(F(D)) POA
96513647 UPE 40‐120(F)(FN)(F(D)) POA 96513649 UPE 40‐120(F)(FN)(F(D) POA
96513647 UPE 50‐60(F)(FN)(F(D)) POA 96513660 UPE 50‐60(F)(FN)(F(D)) POA
97752743 UPE 50‐100(F) POA 96281052 UPE 50‐100(F) POA
96500020 UPE 50‐120(F)(F(D))(FN) POA 96499918 UPE 50‐120(F)(F(D))(FN) POA
96513647 UPE 65‐60(F)(FN)(F(D)) POA 96513661 UPE 65‐60(F)(FN)(F(D)) POA
96500020 UPE 65‐120(F)(FN(D)) POA 96499919 UPE 65‐120(F)(FN)(D) POA
97529279 UPE(D) 80‐120 FZ POA 96281047 UPE25‐60 POA
96281049 UPE25‐100 POA
97752743 MAGNA 25/32/40/50‐40/60/80/100 POA
Please contact Grundfos direct with pump PN NUMBER to make sure correct generation of pump head and terminal box supplied
Above items are under our phase out program ‐ please call to check stock once stock sold parts are obsolete
October 2016Page 27
MAGNA 1 200wExploded view on next page.
£ £
CONTROL BOXRequires configuration file please contact Grundfos direct for part number
CONSISTS OF POS QTY
163 1
163A 2
164 1
164A 5
PUMP HEADDN25/32 (10 bar) 98357751 225
DN25/32 (16 bar) 98357752 260
DN40 98357753 483
CONSISTS OF POS QTY
92 1
163a 2
301 1
CLAMP WITH SCREW pos 92 98148760 71
O' RING pos 301a 98357755 48
PLUG (ALPHA) pos 181 98284561 20
TWO WAY FLAP POS QTY
DN32 215‐217 1 each 96407253 18
DN40 215‐217 1 each 96407257 32
October 2015Page 28
MAGNA 1 750‐1600w
Exploded view on next page. £
PUMP HEAD pos 301DN32‐120 98148737 517
DN40‐80/100 98148739 563
DN40‐120/150/180 98148741 632
DN50‐40/60/80/100 98148743 687
DN50‐120 98148745 816
DN50‐150/180 98148747 1,126
DN65‐40/60 98148749 804
DN65‐80/100/120 98148751 1,020
DN65‐150 98148753 1,160
DN80‐40/60 98148755 946
DN80‐80/100/120 98148757 1,117
DN100‐40/60/80/100/120 98148757 1,117
CONSISTS OF POS QTY
CLAMP 92 1
SCREW 163a 2
SCREW 163d 1
PUMP HEAD 301 1
O' RING 301a 1
GASKET 301b 1
CONTROL BOX pos 163 Requires configuration file please contact Grundfos direct for part number
[email protected] OF POS QTY
CONTROL BOX COMPLETE 163 1.00
SCREW 163a 2.00
SCREW 163d 1.00
TWO WAY FLAP pos 217
DN32 96407253 18
DN40 96407254 26
DN50 96407255 73
DN65 96407256 46
DN80 96407257 32
DN100 96407258 59
CONSISTS OF POS QTY
PIN 215 1.00
RUBBER FLAP 217 1.00
POS QTY
CLAMP WITH SCREW 92 1.00 98148759 73
POS QTY
O' RING 301a 1.00 98148761 32
MAINS PLUG 98284561 20
October 2016Page 30
MAGNA 3Model A to week 12 2015 Model B from week 13 2015
Exploded view on next page. £
PUMP HEAD pos 301
DN32‐120 98148736 658
DN40‐80/100 98148738 726
DN40‐120/150/180 98148740 1,045
DN50‐40/60/80/100 98148742 970
DN50‐120 98148744 1,055
DN50‐150/180 98148746 1,448
DN65‐40/60 98148748 966
DN65‐80/100/120 98148750 1,365
DN65‐150 98148752 1,483
DN80‐40/60 98148754 1,264
DN80‐80/100/120 98148756 1,631
DN100‐40/60/80/100/120 98148756 1,631
CONTROL BOX pos 163
200W Model A & B
750w Model A
1600w Model A
750w Model B
1600w Model B
Requires configuration file please contact Grundfos direct for part number
POWER BOARD pos 166
750w 98148729 364
1600w 98148730 774
CONSISTS OF 750w 1600w
166a 1 2
166b 8 8
166c 1 1
166c 4 4
166d 4 4
167a 1 1
CONTROL BOARD POS 166
750 and 1600w 98148732 314
CONSISTS OF
159, 159a, 159b x 3, 159c, 159d, 159e, 159f, 159g, 159h, 160, 163b x 4, 166a,
heat sink compound
DISPLAY BOARD POS 501
750 and 1600w 98148734 254
CONSISTS OF
163b x 4, 501
TWO WAY FLAP POS 217
DN32 96407253 18
DN40 96407254 26
DN50 96407255 73
DN65 96407256 46
DN80 96407257 32
DN100 96407258 59
CONSISTS OF
215, 217
FRONT COVER POS 164 98148727 97
CONSISTS OF
164, 164a x 5
SENSOR CABLE POS 530b 98148735 59
CONSISTS OF
530, 530a
SENSOR with Cable POS 531 98148758 174
CONSISTS OF
531, 531a, 534, 534a
CLAMP pos 92 98148759 73
O' RING pos 301a 98148761 32
October 2015Page 32
BOOSTERS SPARES
Product Code Description £
PRESSURE SWITCHESGBPS0010 KPI 35 PRESSURE SWITCH ( ‐0.2 ‐ 8 BAR was Sopac ) 120
96578668 Press. switch. Telemechanique, 1 ph /sp 48
CH/JP BOOSTER SET98906913 Kit, Manometer CMB PS/PT + JPB PT 45
98777519 Kit, 5 way fitting and Gasket 62
96587201 SPACER 29
96588682 VIBRATION DAMPER 10
00ID6262 RIVET NUT 12
96603455 GASKET PK4 37
00ID2292 WASHER 12
96898084 Kit, Run Capacitor 20uF IPP 78
00ID3269 FLEXIBLE HOSE (730MM L) CH/24 I 75
98986867 Spare, Arm. rubber hose for 50L Tank 66
98986791 Spare, Flexible pipe 20L CH Booster 40
HYDRO 2000 BOOSTER SET625234 PFU 2000/4 TIL MS, MSH (STANDARD PUMPS) 1,895
625243 PFU 2000/9 TIL MF,MFH,ME,MEH,MES(E PUMPS) 1,184
96591305 PFU 2000 EPROM MS (FIXED) SPECIAL ORDER ONLY
96591307 PFU 2000 EPROM ME (VARIABLE SPEED) SPECIAL ORDER ONLY
HOME BOOSTER96934524 Pump CM 3‐4 I for 3.5 Bar 482
96959353 Pump CM 3‐6 I for 4.5 Bar 581
96848740 PM2 Controller 154
96526321 8 Litre Pressure Vessel 52
97909984 Automatic Air Vent, Brass WRAS 37
97563994 22mm JG Plastic Service Valve 37
97939412 Ballcock & Overflow (Mains Inlet) Kit 169
97939418 Weir Screen & Bezel Kit 108
97939421 Internal Hoses Kit (both models) 256
MINI MONOPRESS
GBOP0001 GBOP0001 SOLENOID PUMP ET508LA 119
October 2016Page 34
CHAMBER STACK
Product Code Model £
CR / CRI1 96453485 CR/CRI 1‐2 327
96453486 CR/CRI 1‐3 324
96453487 CR/CRI 1‐4 352
96453488 CR/CRI 1‐5 377
96453489 CR/CR1 1‐6 412
96453490 CR/CRI 1‐7 437
96453491 CR/CRI 1‐8 462
96453492 CR/CRI 1‐9 488
96453493 CR/CRI 1‐10 548
96453494 CR/CRI 1‐11 571
96453495 CR/CRI 1‐12 607
96453496 CR/CRI 1‐13 633
96453497 CR/CRI 1‐15 687
96453498 CR/CRI 1‐17 755
96453499 CR/CRI 1‐19 809
96453500 CR.CRI 1‐21 894
96453501 CR/CRI 1‐23 945
96453502 CR/CRI 1‐25 996
96453503 CR/CRI 1‐27 1,059
96453504 CR/CRI 1‐30 1,186
96453506 CR/CRI 1‐36 1,342
CRN1 96453508 CRN 1‐3 349
96453509 CRN 1‐4 383
96453510 CRN 1‐5 417
96453511 CRN 1‐6 457
96453512 CRN 1‐7 491
96453513 CRN 1‐8 525
96453514 CRN 1‐9 556
96453515 CRN 1‐10 624
96453516 CRN1‐11 664
96453517 CRN 1‐12 695
96453518 CRN 1‐13 730
96453519 CRN 1‐15 798
96453520 CRN 1‐17 880
96453521 CRN 1‐19 942
96453522 CRN 1‐21 1,045
96453523 CRN 1‐23 1,113
96453524 CRN 1‐25 1,195
96453525 CRN 1‐27 1,249
96453526 CRN 1‐30 1,385
96453527 CRN 1‐33 1,481
96453528 CRN 1‐36 1,581
October 2016Page 35
CHAMBER STACK
Product Code Model £
CR2 405102 CR2‐ 20 324
405103 CR2‐ 30 357
405104 CR2‐ 40 379
405105 CR2‐ 50 423
405106 CR2‐ 60 455
405107 CR2‐ 70 489
405108 CR2‐ 90 554
405109 CR2‐ 110 659
405110 CR2‐ 130 724
405111 CR2‐ 150 790
405112 CR2‐ 180 905
405113 CR2‐ 220 1,060
405114 CR2‐ 260 1,198
CRN2 405208 CRN2‐ 20 366
405209 CRN2‐ 30 405
405210 CRN2‐ 40 466
405211 CRN2‐ 50 516
405212 CRN2‐ 60 565
405214 CRN2‐ 90 736
405215 CRN2‐ 110 855
405216 CRN2‐ 130 944
405217 CRN2‐ 150 1,082
405218 CRN2‐ 180 1,219
405219 CRN2‐ 220 1,452
405220 CRN2‐ 260 1,648
October 2016Page 36
CHAMBER STACK
Product Code Model £
CR / CRI3 96453531 CR/CRI 3‐4 352
96453532 CR/CRI 3‐5 377
96453533 CR/CRI 3‐6 412
96453534 CR/CRI 3‐7 437
96453535 CR/CRI 3‐8 462
96453536 CR/CRI 3‐9 488
96453537 CR/CRI 3‐10 548
96453538 CR/CRI 3‐11 582
96453539 CR/CRI 3‐12 607
96453540 CR/CRI 3‐13 633
96453541 CR/CRI 3‐15 684
96453542 CR/CRI 3‐17 755
96453543 CR/CRI 3‐19 809
96453544 CR/CRI 3‐21 891
96453545 CR/CRI 3‐23 945
96453546 CR/CRI 3‐25 1,010
96453547 CR/CRI 3‐27 1,048
96453548 CR/CRI 3‐29 1,204
96453549 CR/CRI 3‐31 1,209
96453550 CR/CRI 3‐33 1,263
96453551 CR/CRI 3‐36 1,314
CRN3 96453552 CRN 3‐2 335
96453553 CRN 3‐3 358
96453554 CRN 3‐4 383
96453555 CRN 3‐5 415
96453556 CRN 3‐6 457
96453557 CRN 3‐7 488
96453558 CRN 3‐8 522
96453559 CRN 3‐9 556
96453560 CRN 3‐10 621
96453561 CRN 3‐11 662
96453562 CRN 3‐12 695
96453563 CRN 3‐13 727
96453564 CRN 3‐15 792
96453565 CRN 3‐17 877
96453566 CRN 3‐19 942
96453567 CRN 3‐21 1,042
96453568 CRN 3‐23 1,107
96453569 CRN 3‐25 1,172
96453570 CRN 3‐27 1,263
96453571 CRN 3‐29 1,363
96453572 CRN3‐31 1,428
96453573 CRN 3‐33 1,496
96453574 CRN 3‐36 1,595
October 2015Page 37
CHAMBER STACK
Product Code Model £
CR4 415254 CR4‐ 20/1 321
415255 CR4‐ 20 463
415256 CR4‐ 30 508
415257 CR4‐ 40 552
415258 CR4‐ 50 597
415259 CR4‐ 60 642
415260 CR4‐ 80/7 693
415261 CR4‐ 80 736
415262 CR4‐ 100 771
415263 CR4‐ 120 864
415264 CR4‐ 160/14 941
415265 CR4‐ 160 989
415266 CR4‐ 190 1,153
415267 CR4‐ 220 1,270
CRN4 415268 CRN4‐ 20/1 434
415269 CRN4‐ 20 488
415270 CRN4‐ 30 542
415271 CRN4‐ 40 596
415273 CRN4‐ 60 705
415274 CRN4‐ 80/7 837
415275 CRN4‐ 80 875
415276 CRN4‐ 100 880
415277 CRN4‐ 120 997
415278 CRN4‐ 160/14 1,185
415279 CRN4‐ 160 1,253
415280 CRN4‐ 190 1,466
415281 CRN4‐ 220 1,629
October 2016Page 38
CHAMBER STACK
Product Code Model £
CR / CRI 5 96453575 CR/CRI 5‐2 321
96453576 CR/CRI 5‐3 349
96453577 CR/CRI 5‐4 363
96453578 CR/CRI 5‐5 423
96453579 CR/CRI 5‐6 457
96453580 CR/CRI 5‐7 485
96453581 CR/CRI 5‐8 562
96453582 CR/CRI 5‐9 590
96453583 CR/CRI 5‐10 644
96453584 CR/CRI 5‐11 673
96453585 CR/CRI 5‐12 710
96453586 CR/CRI 5‐13 769
96453587 CR/CRI 5‐14 985
96453588 CR/CRI 5‐15 834
96453589 CR/CRI 5‐16 871
96453590 CR/CRI 5‐18 993
96453591 CR/CRI 5‐20 1,056
96453592 CR/CRI 5‐22 1,121
96453593 CR/CRI 5‐24 1,218
96453594 CR/CRI 5‐26 1,251
96453595 CR/CRI 5‐29 1,382
96453596 CR/CRI 5‐32 1,478
96453597 CR/CRI 5‐36 1,657
October 2016Page 39
CHAMBER STACK
Product Code Model £
CRN5 96453598 CRN 5‐2 355
96453599 CRN 5‐3 383
96453600 CRN 5‐4 434
96453601 CRN 5‐5 471
96453602 CRN 5‐6 516
96453603 CRN 5‐7 553
96453604 CRN 5‐8 639
96453605 CRN 5‐9 675
96453606 CRN 5‐10 718
96453607 CRN 5‐11 775
96453608 CRN 5‐12 820
96453609 CRN 5‐13 891
96453610 CRN 5‐14 934
96453611 CRN5‐15 971
96453612 CRN 5‐16 1,016
96453613 CRN 5‐18 1,155
96453614 CRN 5‐20 1,237
96453615 CRN 5‐22 1,319
96453616 CRN 5‐24 1,433
96453617 CRN 5‐26 1,493
96453619 CRN 5‐32 1,766
96453620 CRN 5‐36 1,981
October 2016Page 40
CHAMBER STACK
Product Code Model £
CR8 425049 CR8‐ 20/1 376
425050 CR8‐ 20 416
425051 CR8‐ 30 481
425052 CR8‐ 40 543
425053 CR8‐ 50 610
425054 CR8‐ 60 673
425055 CR8‐ 80 810
425056 CR8‐ 100 990
425057 CR8‐120 1,119
425058 CR8‐ 140 1,248
425059 CR8‐ 160 1,425
425060 CR8‐ 180 1,563
425061 CR8‐ 200 1,692
CRN8 425219 CRN8‐ 20/1 456
425220 CRN8‐ 20 510
425221 CRN8‐ 30 600
425222 CRN8‐ 40 689
425223 CRN8‐ 50 779
425224 CRN8‐60 868
425225 CRN8‐ 80 1,055
425226 CRN8‐ 100 1,287
425227 CRN8‐120 1,467
425228 CRN8‐ 140 1,645
425229 CRN8‐ 160 1,874
425230 CRN8‐ 180 2,064
425231 CRN8‐ 200 2,240
October 2016Page 41
CHAMBER STACK
Product Code Model £
CR1096508403 CR10‐1 388
96508404 CR10‐2 396
96508405 CR10‐3 448
96508406 CR10‐4 503
96508407 CR10‐5 556
96508408 CR10‐6 609
96508409 CR10‐7 665
96508410 CR10‐8 730
96508411 CR10‐9 810
96508412 CR10‐10 863
96508413 CR10‐12 973
96508414 CR10‐14 1,091
96508415 CR10‐16 1,223
96508416 CR10‐18 1,333
96508417 CR10‐20 1,440
96508418 CR10‐22 1,530
CRI 1096491694 CRI 10‐1 398
96491695 CRI 10‐2 407
96491697 CRI 10‐4 511
96491698 CRI 10‐5 564
96491699 CRI 10‐6 617
96491700 CRI 10‐7 674
96491701 CRI 10‐8 741
96491702 CRI 10‐9 821
96491703 CRI 10‐10 874
96491704 CRI 10‐12 983
96491705 CRI 10‐14 1,099
96491706 CRI 10‐16 1,231
96491707 CRI 10‐18 1,344
96491708 CRI 10‐20 1,451
96491709 CRI 10‐22 1,541
96925576 CRI 10‐18 Air cooled top 1,587
October 2016Page 42
Product Code Model £
CRN1096491720 CRN10‐1 426
96491721 CRN10‐2 451
96491722 CRN10‐3 518
96491723 CRN10‐4 588
96491724 CRN10‐5 655
96491725 CRN10‐6 725
96491726 CRN10‐7 796
96491727 CRN10‐8 878
96491728 CRN10‐9 973
96491729 CRN10‐10 1,040
96491730 CRN10‐12 1,181
96491731 CRN10‐14 1,328
96491732 CRN10‐16 1,493
96491734 CRN10‐20 1,771
96491735 CRN10‐22 1,893
CR1596508453 CR15‐1 417
96508454 CR15‐2 438
96508455 CR15‐3 508
96508456 CR15‐4 583
96508457 CR15‐5 674
96508458 CR15‐6 747
96508459 CR15‐7 844
96508490 CR15‐8 922
96508491 CR15‐9 1,004
96508492 CR15‐10 1,076
96508493 CR15‐12 1,297
96508494 CR15‐14 1,385
96508495 CR15‐17 1,604
CRI 1596491736 CRI 15‐1 426
96491737 CRI 15‐2 448
96491738 CRI 15‐3 518
96491739 CRI 15‐4 593
96491740 CRI 15‐5 682
96491741 CRI 15‐6 756
96491742 CRI 15‐7 853
96491743 CRI 15‐8 933
96491744 CRI 15‐9 1,015
96491745 CRI 15‐10 1,086
96491746 CRI 15‐12 1,265
96491747 CRI 15‐14 1,396
96491748 CRI 15‐17 1,615
CHAMBER STACK
October 2016Page 43
CHAMBER STACK
Product Code Model £
CRN1596491749 CRN15‐1 463
96491760 CRN15‐2 505
96491761 CRN15‐3 598
96491762 CRN15‐4 697
96491763 CRN15‐5 807
96491764 CRN15‐6 905
96491765 CRN15‐7 1,026
96491766 CRN15‐8 1,127
96491767 CRN15‐9 1,229
96491768 CRN15‐10 1,327
96491769 CRN15‐12 1,549
96491770 CRN15‐14 1,724
96491771 CRN15‐17 2,011
96639214 CRN15‐2 Air cooled top 749
97939590 CRN15‐3 Air cooled top 1,086
CR16 335065 CR16‐ 30/2 538
335066 CR16‐ 30 615
335067 CR16‐ 40 721
335068 CR16‐ 50 833
335069 CR16‐ 60 945
335070 CR16‐ 70 1,105
335071 CR16‐ 80 1,209
96570394 CR16‐100/9 de‐rated special build 1,563
335072 CR16‐ 100 1,421
335073 CR16‐ 120 1,697
335074 CR16‐ 140 1,908
335075 CR16‐ 160 2,125
CRN16 335220 CRN16‐ 30/2 631
335221 CRN16‐ 30 724
335222 CRN16‐ 40 853
335223 CRN16‐ 50 987
335224 CRN16‐ 60 1,115
335225 CRN16‐ 70 1,306
335226 CRN16‐ 80 1,433
335227 CRN16‐ 100 1,689
335228 CRN16‐ 120 2,013
335229 CRN16‐ 140 2,268
335230 CRN16‐ 160 2,531
October 2016Page 44
Product Code Model £
CR20 96508541 CR20‐1 427
96508542 CR20‐2 446
96508543 CR20‐3 520
96508544 CR20‐4 600
96508545 CR20‐5 693
96508546 CR20‐6 771
96508547 CR20‐7 872
96508548 CR20‐8 954
96508550 CR20‐10 1,072
96508551 CR20‐12 1,305
96508552 CR20‐14 1,442
96508553 CR20‐17 1,672
CRI 20 96491772 CRI 20‐1 429
96491773 CRI 20‐2 457
96491774 CRI 20‐3 530
96491775 CRI 20‐4 596
96491776 CRI 20‐5 701
96491777 CRI 20‐6 781
96491778 CRI 20‐7 882
96491779 CRI 20‐8 962
96491780 CRI 20‐10 1,127
96491781 CRI 20‐12 1,314
96491782 CRI 20‐14 1,453
96491783 CRI 20‐17 1,682
98870723 CRI 20‐3 AIR COOLED TOP 748
CRN 20 96491784 CRN20‐1 467
96491785 CRN20‐2 514
96491786 CRN20‐3 610
96491787 CRN20‐4 711
96491788 CRN20‐5 826
96491789 CRN20‐6 927
96491790 CRN20‐7 1,051
96491791 CRN20‐8 1,156
96491792 CRN20‐10 1,362
96491793 CRN20‐12 1,596
96491794 CRN20‐14 1,777
96491795 CRN20‐17 2,074
CHAMBER STACK
October 2016Page 45
CHAMBER STACK
Product Code Model £
CR30 345144 CR30‐ 10 881
345145 CR30‐ 20 1,382
345146 CR30‐ 30 1,750
345147 CR30‐ 40 2,131
345148 CR30‐ 50 2,499
345149 CR30‐ 80/6 3,324
345150 CR30‐ 80/7 3,530
345151 CR30‐ 80 3,735
345152 CR30‐ 110/9 4,436
345153 CR30‐ 110/10 4,642
345154 CR30‐ 110 4,848
345155 CR30‐ 130/12 5,378
345156 CR30‐ 130 5,584
345157 CR30‐ 160/14 6,275
345158 CR30‐ 160/15 6,480
345159 CR30‐ 160 6,686
CRN30 345160 CRN30‐ 10 1,102
345161 CRN30‐ 20 1,728
345162 CRN30‐ 30 2,187
345163 CRN30‐ 40 2,664
345164 CRN30‐ 50 3,124
345165 CRN30‐ 80/6 4,154
345166 CRN30‐ 80/7 4,412
345167 CRN30‐ 80 4,669
345168 CRN30‐ 110/9 5,546
345169 CRN30‐ 110/10 5,803
345170 CRN30‐ 110 5,578
345172 CRN30‐ 130 6,980
345173 CRN30‐ 160/14 7,844
345174 CRN30‐ 160/15 8,101
345175 CRN30‐ 160 8,358
October 2016Page 46
CHAMBER STACK
Product Code Model £
CR32 96416273 CR32‐ 1.1 560
96416274 CR32‐ 1 560
96416905 CR32‐ 2.2 841
96416276 CR32‐ 2 841
96416906 CR32‐ 3.2 1,439
96416277 CR32‐ 3 1,439
96416907 CR32‐ 4.2 1,719
96416278 CR32‐ 4 1,719
96416908 CR32‐ 5.2 2,014
96416279 CR32‐ 5 2,014
96416909 CR32‐ 6.2 2,292
96416280 CR32‐ 6 2,292
96416910 CR32‐ 7.2 2,574
96416281 CR32‐ 7 2,574
96416911 CR32‐ 8.2 2,993
96416282 CR32‐ 8 2,993
96416912 CR32‐ 9.2 3,281
96416283 CR32‐ 9 3,281
96416913 CR32‐ 10.2 3,557
96416284 CR32‐ 10 3,557
96416915 CR32‐ 12.2 4,133
96416286 CR32‐ 12 4,133
96416916 CR32‐ 13.2 4,414
96416287 CR32‐ 13 4,414
96416917 CR32‐ 14.2 4,701
96416288 CR32‐ 14 4,701
96416291 CRN32‐1 Air‐cooled top 667
96625203 CRN32‐10‐2 Air‐cooled top 4,496
October 2016Page 47
CHAMBER STACK
Product Code Model £
CR45 96416222 CR45‐ 1.1 634
96416223 CR45‐ 1 634
96416224 CR45‐ 2.2 975
96416226 CR45‐ 2 975
96416227 CR45‐ 3.2 1,672
96416228 CR45‐ 3 1,672
96416229 CR45‐ 4.2 2,026
96416230 CR45‐ 4 2,026
96416934 CR45‐ 5.2 2,363
96416231 CR45‐ 5 2,363
96416233 CR45‐ 6.2 2,704
96416234 CR45‐ 6 2,704
96416935 CR45‐ 7.2 3,034
96416235 CR45‐ 7 3,034
96416936 CR45‐ 8.2 3,559
96416236 CR45‐ 8 3,559
96416237 CR45‐ 9.2 3,926
96416937 CR45‐ 9 3,926
96416938 CR45‐ 10.2 4,261
96416238 CR45‐ 10 4,261
96472029 CR45‐12‐2 4,974
96416245 CRN45‐ 3 1,955
October 2016Page 48
CHAMBER STACK
Product Code Model £
CR60 365087 CR60‐ 20 1,538
365088 CR60‐ 30 1,961
365089 CR60‐ 40 2,371
365090 CR60‐ 50 2,781
365091 CR60‐ 60 3,200
365092 CR60‐ 70 3,739
365093 CR60‐ 80 4,150
CRN60 365094 CRN60‐ 20 1,713
365095 CRN60‐ 30 2,234
365096 CRN60‐ 40 2,742
365097 CRN60‐ 50 3,250
365098 CRN60‐ 60 3,767
365099 CRN60‐ 70 4,386
365100 CRN60‐ 80 4,894
October 2016Page 49
CHAMBER STACK
Product Code Model £
CR64 96416307 CR64‐ 1.1 667
96416308 CR64‐ 1 667
96416309 CR64‐ 2.2 1,037
96416310 CR64‐ 2.1 1,037
96416311 CR64‐ 2 1,037
96416312 CR64‐ 3.2 1,766
96416313 CR64‐ 3.1 1,766
96416314 CR64‐ 3 1,766
96416315 CR64‐ 4.2 2,148
96416316 CR64‐ 4.1 2,148
96416317 CR64‐ 4 2,148
96416318 CR64‐ 5.2 2,518
96416319 CR64‐ 5.1 2,518
96416320 CR64‐ 5 2,518
96416321 CR64‐ 6.2 2,888
96416322 CR64‐ 6.1 2,888
96416323 CR64‐ 6 2,888
96416324 CR64‐ 7.2 3,239
96416325 CR64‐ 7.1 3,239
96416331 CRN64‐ 3.1 2,105
October 2016Page 50
CHAMBER STACK
Product Code Model £
CR90 96416256 CR90‐ 1.1 744
96416257 CR90‐ 1 744
96416258 CR90‐ 2.2 1,140
96416260 CR90‐ 2 1,140
96416261 CR90‐ 3.2 1,908
96416263 CR90‐ 3 1,908
96416264 CR90‐ 4.2 2,318
96416266 CR90‐ 4 2,318
96416267 CR90‐ 5.2 2,716
96416269 CR90‐ 5 2,716
96416270 CR90‐ 6.2 3,097
96416272 CR90‐ 6 3,097
CRN90 96458126 CRN90‐ 2.2 1,382
96458129 CRN90‐ 3.2 2,242
96458135 CRN90‐ 5.2 3,234
CR12095059816 CR120‐1 1,453
95059818 CR120‐2‐1 2,026
95059819 CR120‐2 2,026
95059821 CR120‐3 2,596
95059823 CR120‐4‐1 3,167
95059825 CR120‐5‐1 3,741
95059828 CR120‐7 4,878
CRN12095059836 CRN120‐4‐1 3,792
CR15095059842 CR150‐1‐1 1,489
95059843 CR150‐1 1,489
95059845 CR150‐2‐1 2,114
95059847 CR150‐3‐2 2,733
95059849 CR150‐3 2,733
95059851 CR150‐4‐1 3,354
95059853 CR150‐5‐2 3,975
95059854 CR150‐6 4,579
98048195 CR150‐1‐1 Air cooled top 1,775
October 2016Page 51
CONDITIONS OF SALE 1. INTERPRETATION 1.1 All references herein to ‘the Company’ shall be deemed to mean Grundfos Pumps
Limited. 1.2 All references herein to 'The Purchaser’ shall be deemed to mean anyone whether a
person or body corporate who places a purchase order with the Company for a Product.
1.3 The titles to the Conditions herein are for information only and shall not affect the construction or interpretation of these Conditions or any part thereof.
1.4 Reference herein to ‘Products’ shall be deemed to include reference to a product or part or parts thereof. ‘Products’ shall mean all goods or, where the context so admits, all services which the Company supplies to the Purchaser.
1.5 All references to 'Agreement' shall be deemed to mean these Conditions of Sale together with any schedules and attachments hereto specified by the Company to form part of the Agreement.
1.6 Restocking fees are a percentage of the original purchase price of the Product. 2. GENERAL 2.1 All Products are sold subject to the terms and conditions contained in the Agreement. The
Purchaser acknowledges that it has not relied on any representation not repeated in this Agreement.
2.2 No addition or variation may be made to the Agreement without the express written agreement of an authorised officer of the Company.
2.3 In the event of any conflict or inconsistency between these Conditions and the terms or conditions of any order or acceptance, these Conditions shall prevail.
2.4 The giving of any delivery instructions, the acceptance of, or payment for, any Products or any conduct in confirmation by the Purchaser of the transaction hereby contemplated shall constitute unqualified acceptance by the Purchaser of these Conditions.
2.5 Any special terms granted in respect of any one order are not applicable to any subsequent order without the express consent in writing of an authorised officer of the Company.
2.6 Neither party shall be liable to the other party for any delay or failure to meet its obligations (other than a payment obligation) under the Agreement due to any cause beyond its reasonable control. Without prejudice to the generality of the foregoing the following shall be regarded as causes beyond a party's reasonable control: 2.6.1 Act of God, explosion, flood, fire or accident; 2.6.2 War or threat of war, sabotage, civil disturbance or requisition, 2.6.3 Acts, restrictions, regulations, bye‐laws, prohibitions, or measures of any
kind on the part of any government, parliamentary or local authority; 2.6.4 Import or export regulations or embargoes; 2.6.5 Strikes, lock outs or other industrial actions or trade disputes; 2.6.6 Difficulties in obtaining raw materials, labour, fuel, parts or machinery; and 2.6.7 Power failure or breakdown in machinery.
3. ILLUSTRATIONS 3.1 All illustrations or descriptive material of any sort including drawings, specifications of
weight, capacity, dimensions, output and consumption are for information only and shall not form part of the Agreement. They are approximate only and no warranty or guarantee is given for their accuracy.
4. ORDERS AND SPECIFICATIONS 4.1 No purchase order submitted by the Purchaser will be deemed to be accepted by
the Company unless and until confirmed in writing by the Company's authorised representatives.
4.2 The Purchaser will be responsible to the Company for ensuring the accuracy of the terms of any purchase order (including any applicable specifications) submitted by the Purchaser and for giving the Company any necessary information relating to the Purchaser within a sufficient time to enable the Company to perform its obligations in accordance with the Agreement.
4.3 The Purchaser will be responsible to ensure that the Products, are suitable for their particular purpose and the Company will have no liability to the Purchaser if the Products are not suitable for their particular purpose for any reason.
4.4 The Company reserves the right at anytime to make such changes to the design, construction, or composition of the Products or the materials or equipment used in the Products, as it shall think fit without notifying the Purchaser.
5. CANCELLATION BY PURCHASER 5.1 No purchase order which has been accepted by the Company may be cancelled by the
Purchaser except with the agreement in writing of the Company and on terms that the Purchaser will indemnify the Company in full against all loss (including loss of profit) costs (including the cost of all labour and materials used), damages, charges and expenses incurred by the Company as a result of cancellation.
6. SAMPLES 6.1 Samples of Products are available for inspection at the Company's offices. The samples are
ex‐stock at the time of viewing and are without guarantee as to colour or dimensions at the time of delivery. The viewing of a sample does not create a sale by sample.
7. PRICE AND PAYMENT 7.1 The price of the Products will be the Company's quoted price or, where no price has
been quoted (or a quoted price is no longer valid), the price listed in the Company’s published price list current at the date of acceptance of the purchase order. Unless otherwise stated all prices quoted are valid for 30 days only or until earlier acceptance by the Purchaser after which time they maybe altered by the Company without giving prior notice to the Purchaser.
7.2 Unless a fixed price has been agreed in writing between the Company and the Purchaser, the Company reserves the right by giving notice to the Purchaser at any time before delivery to increase the price of the Products to reflect any increase in the cost to the Company which is due to any factors beyond the control of the Company (such as, without limitation, any foreign exchange fluctuation, currency regulations, alteration of duties, significant increase in the cost of labour, materials or other costs of manufacture) any change in delivery dates, quantities or specifications for the Products which is requested by the Purchaser or any delay caused by any instructions of the Purchaser or failure of the Purchaser to give the Company adequate information or instructions.
7.3 Except as otherwise stated under the terms of any quotation or in any price list of the Company, and unless otherwise agreed in writing between the Purchaser and the Company, all prices are given by the Company on delivered at place (DAP) basis.
7.4 The price is exclusive of any applicable value added tax which the Purchaser will be additionally liable to pay to the Company, at the rate prevailing at the date of invoicing.
7.5 Subject to any special terms agreed in writing between the Purchaser and the Company, the Company will be entitled to invoice the Purchaser for the price of the Products on or at any time after delivery of the Products unless the Products are to be collected by the Purchaser or the Purchaser wrongfully fails to take delivery of the Products in which event the Company will be entitled to invoice the Purchaser for the price at any time after the Company has notified the Purchaser that the Products are ready for collection or (as the case may be) the Company has tendered delivery of the Products.
7.6 Unless otherwise agreed, the Purchaser will pay the price of the Products (less any discount to which the Purchaser is entitled but without any other deduction) to be received by the Company not later than the last working day of the calendar month next following the date of the Company‘s invoice and the Company shall be entitled to recover the price notwithstanding that delivery may not have taken place and no property in the Products has not passed to the Purchaser. The time of payment of the price shall be of the essence of the Agreement.
7.7 If the Purchaser fails to make any payment on the due date then, without prejudice to any other right or remedy available to the Company, the Company shall be entitled to: 7.7.1 cancel the Agreement or suspend any further deliveries to the
Purchaser; 7.7.2 appropriate any payment made by the Purchaser to such of the Products (or
the goods supplied under any other contract between the Purchaser and the Company) as the Company may think fit (notwithstanding any purported appropriation by the Purchaser); and
7.7.3 charge the Purchaser interest (both before and after any judgment) on the amount unpaid at the rate of four percent per annum above Barclays Bank Plc base rate from time to time until payment in full is made.
7.8 The Company shall have a lien on all the Purchasers property in the Company's possession for all sums due at any time from the Purchaser to the Company subject to the Company giving to the Purchaser one month's notice in writing. The Company shall be entitled to use, sell and dispose of such property as agent for and at the expense of the Purchaser and apply the proceeds in and towards the payment of monies due and outstanding from the Purchaser to the Company. Thereafter the Company shall be discharged of any liability in respect of the Purchaser's property.
8. DELIVERY 8.1 Delivery of the Products will be made by the Company delivering the Products
to the named place of destination. 8.2 Any dates quoted for delivery of the Products are approximate only and the Company
will not be liable for any additional costs to the Purchaser arising out of any delay in delivery of the Products however caused. Time for delivery shall not be of the essence of the Agreement unless previously agreed by the Company in writing. The Products may be delivered by the Company in advance of the quoted delivery date upon giving reasonable notice to the Purchaser.
8.3 If the Purchaser fails to take delivery of the Products or fails to give the Company adequate delivery instructions at the time stated for delivery (otherwise than by reason of any cause beyond the Purchasers reasonable control or by reason of the Company's fault) then, without prejudice to any other right or remedy available to the Company. The Company may: 8.3.1 store the Products until actual delivery and charge the Purchaser
for the reasonable costs (including insurance) of storage. There will be a 2% storage charge of the item value, payable per month, commencing one month after the goods have become available for delivery from Grundfos ; and
8.3.2 sell the Products at the best price readily obtainable and (after deducting all reasonable storage and selling expenses) account to the Purchaser for the excess over the price under the Agreement or charge the Purchaser for any shortfall below the price under the Agreement.
8.4 If the Products have not been received by the Purchaser within 7 days of notification of dispatch by the Company, or if they have been received but are in a damaged condition or if the quantity received differs from the quantity advised by the Company as dispatched, the Purchaser shall immediately give notice in writing to the Company of the relevant facts. If such notice is not received within 10 days from notification of dispatch by the Company the Company will not be liable to the Purchaser in respect of any loss or damage suffered and the Purchaser shall accept liability as if all the Products had been received and shall not claim against the Company in respect of non or short delivery or damage in transit.
8.5 Where Products are offered for delivery to site the obligation of the Company is to deliver only as near to the site as a safe hard road permits. The Purchaser is to provide to the Company, free of charge, reasonable assistance in unloading.
8.6 If a proof of delivery is required a £10.00 net handling fee will apply. 8.7 A £20.00 net handling fee will be applied, per order, to all orders for spares,
pump components, spares kits, and ancillary items such as flanges, unions etc 9. TRANSFER OF PROPERTY 9.1 All Products shall remain the property of the Company as legal and equitable
owner and no property or title to the Products shall pass to the Purchaser until the full price has been paid to the Company together with the full price of any goods the subject of any other contract with the Company. Until payment in full, the Purchaser shall hold the Products as the Company's fiduciary agent and bailee and shall store the Products in such a way as to enable them to be identified as the property of the Company and shall not encumber the Products in any way. Failure to pay the price for the Products and that of such other goods referred to above when due shall, without prejudice to any other remedies the Company may have, entitle the Company to repossess the Products or so much thereof as the Company may determine from any promises where they may be. For the purpose of repossessing the Products or any part thereof the Purchaser hereby grants an irrevocable Licence to the Company, its employees or agents to enter upon such premises and the Purchaser shall pay to the Company the cost of removal and transfer of the Products or any part thereof.
9.2 The Purchaser may incorporate the Products in or with any other goods provided that any new goods manufactured or containing the Products shall become the sole and exclusive property of the Company and shall be separately stored and marked so as to be identifiable as being manufactured or as containing the Products which are the property of the Company.
9.3 The Purchaser may in the ordinary course of its business sell and deliver the Products or any goods produced with the Products in which the property remains with the Company to any third party as the Company's agent (but as principal vis‐a‐vis any third party), in a fiduciary capacity and for the account of the Company provided that the entire proceeds of sale are held in trust for the Company, are not mingled with any other monies and are at all times identifiable as the Company's monies the Purchaser shall upon request assign to the Company the legal title of any right against any third party arising out of such sale the beneficial interest of which is the Company's. The Purchaser shall be entitled to receive from the Company by way of commission the
excess of the proceeds of sale over the amounts due to the Company from the Purchaser.
9.4 If following the sale to a sub‐purchaser of any Product or any goods produced with any Product in which properly remains with the Company in accordance with Clause 9.3 hereof the Purchaser shall have a receiver or administrative receiver appointed and at the date thereof the Purchaser shall not have received the proceeds of sale of such Product or goods, the Purchaser or the receiver or administrative receiver as agent for the Purchaser, shall assign to the Company within 7 days all rights against the person or persons to whom the Product or goods have been sold.
9.5 The Purchaser shall not take any steps to apply for the appointment of an administrator without giving fourteen days written notice to the Company. From the date of the said notice, the Purchaser shall not be entitled to remain in possession of any of the Products.
9.6 Notwithstanding anything else contained in these Conditions risk in the Products shall pass to the Purchaser on delivery of the Products to the Purchaser's (or Purchasers agent's) vehicles or premises or otherwise in accordance with his purchase order.
10. WARRANTIES AND LIABILITY 10.1 Subject to clause 10.2 the Company warrants that the Products will be free from
defects in materials and workmanship throughout the Warranty Period. 10.2 The above warranty is given by the Company subject to the following conditions:
10.2.1 the Company will be under no liability in respect of any defect in the Products arising from any drawing, design or specification supplied by the Purchaser,
10.2.2 the Company will be under no liability in respect of any defect in the Products arising from:‐ (a) fair wear and tear; (b) accidental or willful damage or misuse; (c) incorrect installation; (d) failure to follow the Company's instructions (whether oral or in writing); (e) the use with the Products of water containing sand, salt or harmful chemicals; (f) inadequate motor projection; (g) the use of faulty ancillary equipment in conjunction with the Product; (h) lightening or other circumstances beyond the Company's control; and
10.2.3 under no circumstances should the Product be dismantled prior to return to the Company and any failure by the Purchaser to comply with this provision will render the warranty in clause 10.1 void.
10.2.4 As of 1st January 2010 all products are subject to a 24 month warranty period from the date of installation or 30 months from the date of manufacture unless otherwise stated.
10.2.5 Warranty repairs will only be carried out between the hours of 9am to 4pm Monday to Friday on dates agreed with the Purchaser.
10.2.6 It is the Purchaser's responsibility to ensure that there is available suitable lifting equipment and other reasonable facilities as required by the Company for maintenance and repairs to the equipment, otherwise the Purchaser will be liable for any additional costs incurred.
10.3 The Purchaser will notify the Company as soon as reasonably practicable and in any event within 14 days after becoming aware of any defect in the Products and will provide authority for the Company's employees or agents to inspect the Products.
10.4 Where any valid claim is made by the Purchaser that the Products are defective then the Company will at its discretion and at its cost either repair or replace the Products (or the part in question), free of charge on an exchange basis. The Purchaser will if required by the Company but at the cost of the Purchaser remove the Product and return it to the Company for repair or replacement. The Purchaser will be responsible for the costs of returning the repaired or replacement Product to the Purchaser and the costs of refitting the Product.
10.5 Subject to clause 10.11 the Company will have no other or further liability to the Purchaser and whether for breach of the Agreement, negligence or otherwise in respect of any direct loss or damage suffered by the Purchaser arising from or in connection with any defect in the Product.
10.6 Subject to clause 10.11 the Company will have no other or further liability to the Purchaser and whether for breach of the Agreement, negligence or otherwise in respect of any consequential loss or damage suffered by the Purchaser arising from or in connection with any defect in the Product.
10.7 The Company's liability for any direct loss or damage sustained by the Purchaser as a result of any error in any weight, dimension, capacity performance or other description or information which has formed a representation or is part of the Agreement will not exceed the price of the Products in respect of which the description or information is incorrect.
10.8 Except for the terms implied by Section 12 of the Sale of Goods Act 1979 or Section 2 of The Supply of Goods and Services Act 1982, all conditions warranties and other terms express or implied, statutory or otherwise are expressly excluded except insofar as they are contained in these Conditions or otherwise expressly agreed by the Company in writing. If any legislation makes it unlawful to exclude or purport to exclude any term from the Agreement. This clause will not apply to such term.
10.9 Subject to clause 10.11 the Company will not be liable to the Purchaser in respect of any direct loss or damage suffered by the Purchaser arising from the negligence of the Company or the negligence or wilful default of the Company's employees or agents in connection with the supply of the Products or the design or manufacture hereof.
10.10 Subject to clause 10.11 the Company will not be liable to the Purchaser in respect of any consequential loss or damage suffered by the Purchaser arising from the negligence of the Company or the negligence or willful default of the Company's employees or agents in connection with the supply of the Products or the design or manufacture hereof.
10.11 The terms of clause 10.5, 10.6, 10.9 and 10.10 will not exclude any liability of the Company: 10.11.1 for death or personal injury resulting from the negligence of the Company
or the negligence or willful default of the Company's employees or agents; or
10.11.2 for damage to property resulting from no negligence of the Company or the negligence or willful default of the Companies employees or agents except that such liability will be limited to £900,000 per occurrence.
10.12 Except in respect of liability for death or personal injury resulting from negligence, the Company will not be liable to the Purchaser under any circumstances (and whether arising from breach of the Agreement or the negligence of the Company or its employees or agents or otherwise) for any indirect special or consequential loss or damage including without limitation loss of Production, loss of profits, loss of contracts or goodwill suffered by the Purchaser which arise out of or in
connection with the supply of the Products or their use or resale by the Purchaser even if such loss was reasonably foreseeable or the Company had been advised of the possibility of the Purchaser incurring the same.
10.13 The Company will not be liable to the Purchaser in respect of any claims pursuant to the Consumer Protection Act 1987 which may be brought against the Purchaser by third parties in respect or defects in the Products and the Purchaser will fully indemnify the Company against all damages, penalties, costs and expenses incurred by the Company arising from any such claims which may be brought against the Company by third parties except in either case insofar as the defects in the Products have arisen as a result of the negligence of the Company or the negligence or willful default of the Company's employees or agents.
11. RETURN OF PRODUCTS 11.1 Products may not be returned to the Company except by prior written
permission of an authorised officer of the Company and such return shall be at the risk of the Purchaser and subject to payment by the Purchaser of handling and restocking fees, transport and all other costs incurred by the Company. All items requested to be returned to Grundfos will be subject to a minimum 35% restocking fee (subject to inspection). Goods must be returned in their original packaging and within 6 months of date of dispatch. All returns will be subject to inspection, to ascertain age, condition and product type and can incur an increased restocking fee. Contact [email protected] with the original purchase order number, to arrange collection. Should products be returned to the Company without prior consent they will be refused delivery. Items with a net value of £125.00 (per item) or less cannot be returned for credit. Pump Repair Kits, Power Cable, Engineered to Order, 3rd party sourced and Obsolete product cannot be returned for credit.
11.2 Sololifts are excluded from product returns. In the event of a warranty liability the Purchaser should contact the service organisation.
11.3 If any Product has been in contact with hazardous liquids then the Company requires the Purchaser to complete a COSHH certification prior to return of the goods.
11.4 For avoidance of doubt under no circumstances will bespoke products be accepted for returns
12. INSOLVENCY OF THE PURCHASER 12.1 This clause applies if:
12.1.1 the Purchaser is in breach of any of its obligations under the Agreement and fails to remedy the breach within 7 days of receipt of notice from the Company specifying the breach and requiring its remedy; or
12.1.2 the Purchaser makes any voluntary arrangement with its creditors or (being an individual or firm) petitions for bankruptcy or becomes bankrupt or (being a company) passes a resolution or proposal to go into administration or liquidation or becomes subject to an administration order or goes into liquidation (otherwise than for the purposes of amalgamation or reconstruction); or
12.1.3 an encumbrancer takes possession or a receiver is appointed of any of the property or assets of the Purchaser; or
12.1.4 the Purchaser ceases or threatens to cease to carry on business; or 12.1.5 the Company reasonably apprehends any of the events mentioned above is
about to occur in relation to the Purchaser and notifies the Purchaser accordingly.
12.2 If this clause applies then, without prejudice to any other right or remedy available to the Company, the Company will be entitled to cancel the Agreement or suspend any further deliveries under the Agreement without any liability to the Purchaser and if the Products have been delivered but not paid for the price shall become immediately due and payable notwithstanding any previous agreement or arrangement to the contrary.
13. SERVICE
13.1 If the Agreement includes an obligation for the Company to undertake servicing of the Products/provide services/carry out repairs to the Purchasers goods the Purchaser shall pay the price stipulated in the Agreement for such service upon collection or the purchaser's goods or 28 days following the date of issue of notification by the Company to the Purchaser that the service has been completed whichever shall be the earlier.
13.2 If payment of the price referred to in clause 13.1above is not made on or before the due date the Company shall be entitled to charge interest in accordance with the provisions of clause 7.7.3 above.
14. MINIMUM ORDER VALUE
14.1 Our minimum order value is £55.00 NET. Orders between the minimum order value and the low order threshold of £335.00 NET for pumps or £130.00 NET for Category 4 items will be subject to a £37 net handling fee.
15. JURISDICTION
15.1 The Agreement is subject solely to English law and any dispute arising here from shall be settled in accordance therewith.
GRUNDFOS PUMPS LTD.Grovebury Road Leighton Buzzard Beds LU7 4TL
Tel: 01525 850000Email: [email protected]
www.grundfos.co.uk
The
nam
e G
rund
fos,
the
Gru
ndfo
s log
o, a
nd b
e th
ink
inno
vate
are
regi
ster
ed tr
adem
arks
ow
ned
by G
rund
fos H
oldi
ng A
/S o
r Gru
ndfo
s A/S
, Den
mar
k. A
ll rig
hts r
eser
ved
wor
ldw
ide.
GB/
PRIC
ELIS
T-CA
T4A/
01-0
9-20
16