GRUNDFOS DATA BOOKLET

MAGNA3 D 40-150 F 250 1x230V PN6/10 Grundfos Pump 97924466

Thank you for your interest in our productsPlease contact us for more information, or visit our websitehttps://www.lenntech.com/grundfos/MAGNA3D/97924466/MAGNA3-D-40-150-F.html

info@lenntech.comtel. +31-15-261.09.00fax. +31-15-261.62.89

BE > THINK > INNOVATE

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. Description1 MAGNA3 D 40-150 F

Product No.: 97924466

MAGNA3 – More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plusfunctionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers lookingto create high-performance systems for buildings.This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, makingit the obvious choice for almost any building project – old or new.

The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft sealand with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head.The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.

The pump is characterised by the following:• controller integrated in the control box• control panel with TFT display on the control box• control box prepared for optional CIM modules• built-in differential-pressure and temperature sensor• cast-iron pump housing (depending on model)• carbon-fibre-reinforced composite rotor can• stainless-steel bearing plate and rotor cladding• aluminium alloy stator housing• air-cooled power electronicsThe MAGNA3 is a single-phase pump.

Characteristic features• AUTOADAPT.• FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttlingvalves).• Proportional-pressure control.• Constant-pressure control.• Constant-temperature control.• Constant-curve duty.• Max. or min. curve duty.• Automatic Night Setback.• No external motor protection required.• Insulating shells supplied with single-head pumps for heating systems.• Large temperature range where the liquid temperature and the ambient temperature are independentof each other.

CommunicationThe MAGNA3 enables communication via the following:• wireless Grundfos GO Remote• fieldbus communication via CIM modules• digital inputs• relay outputs• analog input (more than a pump function as heat energy meter)

Motor and electronic controllerThe MAGNA3 incorporates a 4-pole synchronous, permanent-magnet motor (PM motor). This motortype is characterised by higher efficiency than a conventional asynchronous squirrel-cage motor.The pump speed is controlled by an integrated frequency converter.A differential-pressure and temperature sensor is incorporated in the pump.

Printed from Grundfos Product Centre [2018.02.043]

Position Qty. DescriptionLiquid:Pumped liquid: WaterLiquid temperature range: -10 .. 110 °CLiquid temperature during operation: 60 °CDensity: 983.2 kg/m³

Technical:TF class: 110Approvals on nameplate: CE,VDE,EAC,CN ROHS

Materials:Pump housing: Cast iron

EN-GJL-250ASTM A48-250B

Impeller: PES 30%GF

Installation:Range of ambient temperature: 0 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 40Pressure rating: PN6/10Port-to-port length: 250 mm

Electrical data:Power input - P1: 16 .. 627 WMains frequency: 50 HzRated voltage: 1 x 230 VMaximum current consumption: 0.18 .. 2.75 AEnclosure class (IEC 34-5): X4DInsulation class (IEC 85): F

Others:Energy (EEI): 0.18Net weight: 31.3 kgGross weight: 35.2 kgShipping volume: 0.087 m³Swedish RSK No.: 5732533Norwegian NRF no.: NRF NO 9042759

Printed from Grundfos Product Centre [2018.02.043]

97924466 MAGNA3 D 40-150 F 50 HzH

[m]

0

2

4

6

8

10

12

14

16

Q [m³/h]0 5 10 15 20 25 30 35 40 45

eta[%]

0

20

40

60

80

100

MAGNA3 D 40-150 F, 50Hz

P1[W]

0

100

200

300

400

500

600

700

800

900

1,000

1,100

1,200

1,300

Printed from Grundfos Product Centre [2018.02.043]

H[m]

0

2

4

6

8

10

12

14

16

Q [m³/h]0 5 10 15 20 25 30 35 40

eta[%]

0

20

40

60

80

100

MAGNA3 D 40-150 F, 50Hz

P1[W]

0

200

400

600

800

1,000

1,200

220 294

250

512

100/110

14/1

9

40

84150

69 303372

84

130 130

155

58

250

260

294 220

M12

L

N

NC

NO

CIN

MAX

MIN

S/S

RELAY1

RELAY2

Max. 250V AC

, 2A, AC1

Min. 5V D

C, 20m

A

24VM

ax.22m

A

U/I

Digital inputs

Relay outputs

Analog input forexternal sensor

NC

NO

C

L

N

Example of mains-connected motorwith mains switch, backup fuse and additional protection

RCD/RCCB

Description ValueGeneral information:Product name: MAGNA3 D 40-150 FProduct No: 97924466EAN number: 5710626495443Technical:Head max: 150 dmTF class: 110Approvals on nameplate: CE,VDE,EAC,CN ROHSModel: DMaterials:Pump housing: Cast iron

EN-GJL-250ASTM A48-250B

Impeller: PES 30%GFInstallation:Range of ambient temperature: 0 .. 40 °CMaximum operating pressure: 10 barFlange standard: DINPipe connection: DN 40Pressure rating: PN6/10Port-to-port length: 250 mmLiquid:Pumped liquid: WaterLiquid temperature range: -10 .. 110 °CLiquid temperature during operation: 60 °CDensity: 983.2 kg/m³Electrical data:Power input - P1: 16 .. 627 WMains frequency: 50 HzRated voltage: 1 x 230 VMaximum current consumption: 0.18 .. 2.75 AEnclosure class (IEC 34-5): X4DInsulation class (IEC 85): FOthers:Energy (EEI): 0.18Net weight: 31.3 kgGross weight: 35.2 kgShipping volume: 0.087 m³Swedish RSK No.: 5732533Norwegian NRF no.: NRF NO 9042759

220294

512

100/110

14/19

4084

150

69303

372

130130260

294220

M12

Printed from Grundfos Product Centre [2018.02.043]

97924466 MAGNA3 D 40-150 F 50 Hz

Note! All units are in [mm] unless others are stated.Disclaimer: This simplified dimensional drawing does not show all details.

220

294

250

512

100/

110

14/19

4084150

6930

337

2

84

130

130

15558

250

260

294

220

M12

Printed from Grundfos Product Centre [2018.02.043]

97924466 MAGNA3 D 40-150 F 50 Hz

Note! All units are in [mm] unless others are stated.

L N

NC NO C INMAX MIN S/S

RELAY1 RELAY2

Max. 250V AC, 2A, AC1

Min. 5V DC, 20mA

24VMax.22mA

U/I

Digital inputs Relay outputs Analog input forexternal sensor

NC NO C

L N

Exam

ple

of m

ains

-con

nect

ed m

otor

with

mai

ns s

witc

h, b

acku

p fu

se a

nd a

dditi

onal

pro

tect

ion

RC

D/R

CC

B

Disclaimer: The information about the Grundfos pump in this document may be outdated.Data may be subject to alterations without further notice.Please contact us to verify the data above is still accurate/up-to-date.

All information is copyright Grundfos.

info@lenntech.comwww.lenntech.comtel. +31-15-261.09.00fax. +31-15-261.62.89