of 3/3
44 Phone: 1-641-472-4665 | [email protected] | Toll Free: 1-888-695-0578 (ORDERS ONLY) GROUP 10: FRONT AXLE The Lock Right Locker allows you to keep your hands on the wheel and your mind on the terrain... Lock Right Differential Locker These kits replace the differential spider gears with a ratcheting assembly that transfers torque in a reversed fashion from normal differentials. Lock Right works automatically, so you can keep your hands on the wheel and your mind on the terrain. Because your ring and pinions are not disturbed during instal- lation, no gear lash adjustments are required. If you want to get a good grip with both front or rear wheels the Lock Right should do the job for you. Fits Vehicle Type: D,E,F $385 New Superwinch Lockout Hubs Fits WC 3/4 Ton, 1 Ton PW, WC 1 1/2 Ton (6X6), M-37 $159 Dana44 W100 & W200 $165 Selectro Lockout Hubs W-300-’58-68 $275 W-300-’69-74 $275 M715 Kaiser Jeep $275 Selectro Lockout Hubs WC 1/2 Ton $275 New Selectro Lockout Hubs (not pictured) Internal--non flanged. Fits W100 1969-71 $325 FRONT AXLE SEAL & GASKET SETS M-37, Civ PW, WC 6x6 and WC 3/4 Ton Late (9 5/8” diff.) Front Axle Seal and Gasket Set. Includes: inner axle oil seal (2), hub seals (2), pinion seal (4“ diam- eter), Knuckle felt set and gasket set includes all gaskets (except knuckle cap & fl ange) $75 Set 1/2 Ton WC & VC Front Axle Seal and Gasket Set. Includes: inner axle oil seal (2), front hub seal (2) - specify VC 1/2 ton or WC 1/2 ton, differential pinion seal 8 3/4” small ring gear (1), front knuckle felt set, front axle gasket set includes all gaskets (except knuckle cap & fl ange) $65 Set 3/4 Ton WC Early (8 3/4” diff.) Front Axle Seal and Gasket Set. Includes: inner axle oil seal (2), hub seals (2), pinion seal ( 3.5“ diameter), knuckle felt set and gasket set includes all gaskets (except knuckle cap & fl ange) $65 Set Front/Rear Axle Differential Assembly Typical Exploded Parts View Most parts in stock for all models Differential Gears Repair Kit for all 3/4 & 1 ton Dodge Dif- ferentials, includes gaskets, spider gears, side gears, pins, etc. CC1057780 $65 Stud, Drive Flange NEW [Ord # 7351088] Fits Vehicle Type: A,B,C,D,E,F Part # 10:916414 $2 Nut, Drive Flange Stud NEW Fits Vehicle Type: A,B,C,D,E,F Part # 10:125913 $1 Stud, Drive Pinion Carrier, Conversion NEW This stud is made spe- cifically for converting small early type axle housing to accept large 9 5/8” differential. Important: Diff. inspection cover must be replaced with late style. Fits Vehicle Type: B,D Part # 10:CCS9999 $5 Lockout Hubs Save wear and tear on your front axle. Lim- ited lifetime warranty.

GROUP 10: FRONT AXLE - VETERAN · PDF fileFront Axle Assembly Typical Exploded Parts View Most parts in stock for most models Shim, Steering Knuckle Flange Bearing Cap — Upper

  • View
    224

  • Download
    4

Embed Size (px)

Text of GROUP 10: FRONT AXLE - VETERAN · PDF fileFront Axle Assembly Typical Exploded Parts View Most...

  • 44 Phone: 1-641-472-4665 | [email protected] | Toll Free: 1-888-695-0578 (ORDERS ONLY)

    GROUP 10: FRONT AXLE

    The Lock Right Locker allows you to keep your hands on the wheel and your mind on the terrain...

    Lock Right Differential Locker These kits replace the differential spider gears with a ratcheting assembly that transfers torque in a reversed fashion from normal differentials. Lock Right works automatically, so you can keep your hands on the wheel and your mind on the terrain. Because your ring and pinions are not disturbed during instal-lation, no gear lash adjustments are required. If you want to get a good grip with both front or rear wheels the Lock Right should do the job for you. Fits Vehicle Type: D,E,F $385

    New Superwinch Lockout Hubs

    Fits WC 3/4 Ton, 1 Ton PW, WC 1 1/2 Ton (6X6), M-37 $159 Dana44 W100 & W200 $165

    Selectro Lockout Hubs W-300-58-68 $275 W-300-69-74 $275 M715 Kaiser Jeep $275

    Selectro Lockout Hubs WC 1/2 Ton $275

    New SelectroLockout Hubs (not pictured) Internal--non flanged. Fits W100 1969-71 $325

    FRONT AXLE SEAL & GASKET SETS M-37, Civ PW, WC 6x6 and WC 3/4 Ton Late (9 5/8 diff.) Front Axle Seal and Gasket Set. Includes: inner axle oil seal (2), hub seals (2), pinion seal (4 diam-eter), Knuckle felt set and gasket set includes all gaskets (except knuckle cap & fl ange) $75 Set 1/2 Ton WC & VC Front Axle Seal and Gasket Set. Includes: inner axle oil seal (2), front hub seal (2) - specify VC 1/2 ton or WC 1/2 ton, differential pinion seal 8 3/4 small ring gear (1), front knuckle felt set, front axle gasket set includes all gaskets (except knuckle cap & fl ange) $65 Set 3/4 Ton WC Early (8 3/4 diff.) Front Axle Seal and Gasket Set. Includes: inner axle oil seal (2), hub seals (2), pinion seal ( 3.5 diameter), knuckle felt set and gasket set includes all gaskets (except knuckle cap & fl ange) $65 Set

    Front/Rear Axle Differential Assembly Typical Exploded Parts View Most parts in stock for all models

    Differential Gears Repair Kit for all 3/4 & 1 ton Dodge Dif-ferentials, includes gaskets, spider gears, side gears, pins, etc. CC1057780 $65

    Stud, Drive Flange NEW [Ord # 7351088] Fits Vehicle Type: A,B,C,D,E,F Part # 10:916414 $2

    Nut, Drive Flange Stud NEW Fits Vehicle Type: A,B,C,D,E,F Part # 10:125913 $1

    Stud, Drive Pinion Carrier, Conversion NEW This stud is made spe-cifically for converting small early type axle housing to accept large 9 5/8 differential. Important: Diff. inspection cover must be replaced with late style. Fits Vehicle Type: B,D Part # 10:CCS9999 $5

    Lockout Hubs Save wear and tear on your front axle. Lim-ited lifetime warranty.

  • 45 Phone: 1-641-472-4665 | [email protected] | Toll Free: 1-888-695-0578 (ORDERS ONLY)

    GROUP 10: FRONT AXLE

    Shim, Drive, Flange NOS.005

    Fits Vehicle Type: A Part # 10:915580 $4 .007 Fits Vehicle Type: A Part # 10:915581 $4 NOS .020 Fits Vehicle Type: A Part # 10:915582 $4

    Retainer, Flange, Oil Seal NOS [Ord # 7348992] Fits Vehicle Type: B,C,D,E,F Part # 10:925581 $12.50

    Seal, Drive Pinion Small (approx. 3 1/2diameter) NOS (8 3/4 small differential). Fits Vehicle Type: A,BPart # 10:856864 $15

    Gasket, Drive Flange NOS 1958-68 only. Fits Vehicle Type: H Part # 10:1795195 $2

    Retainer, Oil Seal Felt, Flange Joint USED [Ord # 7348991] Fits Vehicle Type: B,C,D,E,F Part # 10:924638 $2

    Front Axle Assembly Typical Exploded Parts View

    Most parts in stock for most models

    Shim, Steering Knuckle Flange Bearing Cap Upper

    NEW [Ord # 7348994].005 Fits Vehicle Type: B,C,D,E,F Part # 10:924591 $3.50 NOS .005 Half-Ton. Fits Vehicle Type: A Part # 10:916855 $3.50 NEW [Ord # 7349269] .007 Fits Vehicle Type: B,C,D,E,F Part # 10:924592 $3.50 NOS .007 Half-Ton. Fits Vehicle Type: A Part # 10:916856 $3.50 NEW [Ord # 7349268] .020 Fits Vehicle Type: B,C,D,E,F Part # 10:924593 $3.50 NOS .020 Half-Ton Fits Vehicle Type: A Part # 10:916857 $3.50

    Seal, Inner Axle NOS Fits Vehicle Type: A Part # 10:599086 $7.50 NOS [Ord #500057] Fits Vehicle Type: B,C,D,E,F Part # 10:924432 $7.50

    Guide & Seal, Inner Front Axle Shaft NEW Fits Vehicle Type: G Part # 10:1791964 $15

    Seal, Guide Inner Front Axle Shaft NEW Fits Vehicle Type: H Part # 10:1795508 $22

    Guide, Inner Front Axle Shaft NEW Fits Vehicle Type: H Part #10:1795509 $35

    Front Axle Shafts VC 1/2 ton right assembly Bendix CC598850 $150 WC 1/2 ton right assembly Bendix CC915114 $150 WC 1/2 ton left assembly Bendix CC915115 $150 WC 3/4 & 6x6 right assembly Bendix CC924244 $125 WC 3/4 & 6x6 left assembly Bendix C0924245 $125 M-37 & PW right inner Tracta CC1268430, CC1189230 $75 M-37 left inner Tracta CC1268431 $75 PW left inner Tracta CC1189231 $75 M37 & PW outer Tracta CC1189232 $75 M37, PW, W300 Tracta joint(2 piece) -not shownUSED $50, NOS $100

    5.83 Ring & Pinion Gear Sets Small 8 1/4 type for early 3/4 ton WC models CC922848 $200 Large 9 5/8, 4.88 ring and pinion set $455 (call for availability)

    Seal, Drive Pinion Large (approx. 4 diameter) NEW [Ord # 7411822](9 5/8 large differential only). Fits Vehicle Type: B,C,D,E,FPart # 10:928114 $23.50

    Gasket, Drive Flange NEW [Ord # 7351041] Fits Vehicle Type: B,C,D,E,F Part # 10:915565 $2

    Inner Front Axle Shafts (not shown) NOS 1958-68 Dana 70 23 Spline. Fits Vehicle Type: H Right Part # 10:1795502 $200 Left Part # 10:1795503 $200

  • 46 Phone: 1-641-472-4665 | [email protected] | Toll Free: 1-888-695-0578 (ORDERS ONLY)

    GROUP 10: FRONT AXLE

    An Important Note Concerning Spicer/Dana 44 & Spicer/

    Dana 70 Front Axle Parts: Prices may be subject to change.

    Please call us for our most current price on these items.

    Cone Bearing, Bronze, Steering Knuckle Flange - Upper

    NOS [Ord # 7705714] Fits Vehicle Type: D,E,F,G 3,500 lb. axle only),H Part # 10:1270396 $55 NOS [Ord # 7705714] Fits Vehicle Type: B,C Part # 10:924436 $55

    Socket, Wheel Bearing Adjusting Nut 2 9/16 6-Sided

    NOS Fits Vehicle Type: H Part # 10:WBNW002 $25

    Axle Housing Cover Gaskets LargeNOS B-(large differential only). Fits Vehicle Type: B,C Part # 10:929879 $7.50 SmallNOS B-(small differential only). Fits Vehicle Type: A,B Part # 10:915098 $7.50 Drive Pinion Carrier Gaskets Large Differential NOS [Ord # 7411818B]-(large dif-ferential only). Fits Vehicle Type: B,C,D,E,F Part # 10:929877 $7.50 Small DifferentialNOS B-(small differential only). Fits Vehicle Type: A,B Part # 10:952554 $7.50

    Oil Seal, Neoprene, Front Knuckle-Large NOS 3,500 & 4,500 lb axle-only Fits Vehicle Type: G,H Part # 10:1795511 $39 CALL FOR AVAILABILITY

    Bushing, SteeringKnuckle & Axle Housing REP [Ord # 7351046] (4) required on front axle. Fits Vehicle Type: B,D,C,E,FPart # 10:924249 $28

    Felt, Oil Seal, Front Steering Knuckle NOS 3,000 lb axle only. Fits Vehicle Type: G Part # 10:1791960 $8

    Cup, Bearing, SteeringKnuckle Lower/Upper

    NEW Fits Vehicle Type: A Part # 10:598837 $9.50 NEW Fits Vehicle Type: B,C,D,E,F,G Part # 10:927013 $12.50

    Felt, Oil Seal, Front Steering Knuckle NOS 3,500 & 4,500 lb axle-only. Fits Vehicle Type: G,H Part # 10:1795514 $8

    Gasket, Steering Knuckle, Bearing CapLower NEW [Ord # 7348988] Fits Vehicle Type: B,C,D,E,F Part # 10:924594 $1.50

    Oil Seal, Neoprene, Front KnuckleSmall NOS 3,000 lb axle only; (2) required. Fits Vehicle Type: G Part # 10:1791957 $15 Cone Bearing, Steering

    Knuckle Flange - Lower NEW Fits Vehicle Type: A Part #10:598838 $15.50 NEW [Ord # 705436] Fits Vehicle Type: B,C,D,E,F,G (G-except 3000 lb axle),H Part # 10:927014 $22.50

    Gasket, SteeringKnuckle Flange

    NEW[Ord # 7348989] Fits Vehicle Type: B,C,D,E,F Part # 10:924634 $5 NEW Fits Vehicle Type: A Part # 10:915088 $5

    Cup, Bearing, Steering Knuckle NEW 3,000 lb. axle only. Fits Vehicle Type: G Part # 10:1793515 $6.50

    Cone Bearing, Bronze, Steering Knuckle FlangeUpper, Half-Ton NOS Fits Vehicle Type: A Part # 10:916060 $22.50

    Bushing, Upper Steering Knuckle Pivot-Splined NOS 3,000 lb. axle only (1959-68). Fits Vehicle Type: G Part # 10:2511521 $45

    Bushing, Steering Knuckle Half Ton REP (2) required. Fits Vehicle Type: A Part # 10:915579 $28

    Bushing, Upper Steering Knuckle Pivot-Keyed NOS 3,000 lb. axle only (1969-71). Fits Vehicle Type: G Part # 10:1924416 $45

    Bushing, Steering Knuckle NEW Fits Vehicle Type: H Part # 10:1795578 $35

    Retainer,Oil Seal, Front Steering Knuckle NOS 3,500 & 4,500 lb. axle only (4) required. Fits Vehicle Type: G,H Part # 10:1795512 $5

    Cone, Bearing, Lower Steer-ing Knuckle NEW 3,000 lb. axle only. Fits Vehicle Type: G Part # 10:1793514 $16

    Retainer, Oil Seal Front Steering Knuckle NOS 3,000 lb axle only (4) required. Fits Vehicle Type: G Part # 10:1791958 $5

    Bushing, Steering Knuckle NEW Fits Vehicle Type: G Part # 10:1791706 $28

    Socket, Wheel Bearing Adjusting Nut 2 9/16 8-Sided NEW Fits 3/4 drive. Fits Vehicle Type: A,B,C,D,E,F Part # 10:WBNW001 $49