Grinnell Quick Up Pipes & Fittings for Piping Installation Catalog 2013

Mechanical Grooved Products Catalogue

Making Connections…Building Solutions

EMEA REGION

www.grinnell.com

TABLE OF CONTENTS

Table of

Contents

2

General Data Section . . . . . . . . . . 8 - 16Why Grooved? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Why GRINNELL? . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Product Features and Benefits . . . . . . . . . . . . . . . . . . 10Agency Listings and Approvals . . . . . . . . . . . . . . . . . 11General Code Groups, Associations, Laboratories,

Government Agencies, and Approval Bodies . . . . . . 11Product Design and Testing . . . . . . . . . . . . . . . . . . . 12ISO 9001:2008 Certified . . . . . . . . . . . . . . . . . . . . 13Shurjoint Products . . . . . . . . . . . . . . . . . . . . . . . . . . 14How to Build GRINNELL Part Numbers . . . . . . . . . . . 15GRINNELL Website . . . . . . . . . . . . . . . . . . . . . . . . . 16

Grooved Couplings . . . . . . . . . . 17 - 38Grooved Couplings Table of Contents . . . . . . . . . . . . 18Figure 772 Rigid Couplings . . . . . . . . . . . . . . . . 20 - 21Figure 740 Rapid Installation

Pivot-Bolt (GRIP) Rigid Couplings . . . . . . . . . . . . . . 22Figure 774 Rigid Couplings . . . . . . . . . . . . . . . . . . . 23Figure 705 Flexible Couplings . . . . . . . . . . . . . . . . . 24Figure 770 High Pressure Rigid Couplings . . . . . . . . . 25Figure 707 Heavy Duty Flexible Couplings . . . . . . 26 - 27Figure 707L Large Diameter Couplings . . . . . . . . . . . 28Shurjoint Figure 7707N Large Diameter

Flexible Couplings . . . . . . . . . . . . . . . . . . . . . . . . 29Figure 909 Plain End Couplings . . . . . . . . . . . . . . . . 30Figure 780 Grooved Snap Couplings . . . . . . . . . . . . 31Shurjoint Figure XH-70EP Extra Heavy

Rigid Couplings With End Protection (EP) Gasket . . . 32Figure 716 Flexible Reducing Couplings . . . . . . . . . . 33Figure 702 Mechanical Outlet Couplings . . . . . . . 34 - 35Shurjoint Figure 7706-T Transition Couplings . . . . . . . 36Electrical Continuity . . . . . . . . . . . . . . . . . . . . . . . . 37Couplings in Galvanised Finish . . . . . . . . . . . . . . . . 37Coupling Installation Information . . . . . . . . . . . . . . . 38

Flange Adapters . . . . . . . . . . . . 39 - 48Flange Adapters Table of Contents . . . . . . . . . . . . . . 40Figure 71 Flange Adapters (PN10/PN16 BS 4504) . . 41Figure 71 Flange Adapters (ANSI) . . . . . . . . . . . 42 - 43Flange Adapter Washers . . . . . . . . . . . . . . . . . . . . . 44Flange Adapter Technical Data . . . . . . . . . . . . . . . . . 45Figure 343 & 344 Flange Adapters

(PN10/PN16 BS 4504) . . . . . . . . . . . . . . . . . 46 - 47Figure 341 Flange Adapters (ANSI) . . . . . . . . . . . . . 48

Grooved Fittings . . . . . . . . . . . . 49 - 82Grooved Fittings Table of Contents . . . . . . . . . . . . . . 50Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . 51Figure 210 90° Elbows . . . . . . . . . . . . . . . . . . . . . . 52Figures 210LR & 310LR 90° Long Radius Elbows . . . . . 53Figure 201, 301 & 201LR 45° Elbows . . . . . . . . . . . 54Figures 212 & 312 - 221⁄2° Elbows . . . . . . . . . . . . . . 55Figures 211 & 311 - 111⁄4° Elbows . . . . . . . . . . . . . . 56Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . 57Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . 58

Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . 59Figures 219 & 319 Tees . . . . . . . . . . . . . . . . . . . . . 60Figure 227 Cross . . . . . . . . . . . . . . . . . . . . . . . . . . 61Figures 260 & 360 End Caps . . . . . . . . . . . . . . . . . 62Figures 361, 362, 363, 364 & 365

End Caps with ISO R7 Threaded Outlets . . . . . . 63 - 64Figures 221 & 321 Reducing Tees . . . . . . . . . . . 65 - 68Figure 322 Reducing Tees

(Groove x Groove x Female BSP Thread) . . . . . . . . . 69Figure 222 Hydrant Tee . . . . . . . . . . . . . . . . . . . . . 69Figures 250 & 350 Concentric Reducers . . . . . . . 70 - 72Figures 251 & 351 Eccentric Reducers . . . . . . . . 73 - 75Figure 314 45° Laterals . . . . . . . . . . . . . . . . . . . . . 76Figure 325 45° Reducing Laterals . . . . . . . . . . . . . . . 77Figure 330 Tee Wyes . . . . . . . . . . . . . . . . . . . . 78 - 79Figure 331 Reducing Tee Wyes . . . . . . . . . . . . . . . . 80Figures 391, 392 & 393 Adapter Nipples . . . . . . . . . 81Figure 304 Groove x Male BSP Thread

Nipple, Machined . . . . . . . . . . . . . . . . . . . . . . . . 82Figure 305 Groove x Female BSP Thread

Nipple, Machined . . . . . . . . . . . . . . . . . . . . . . . . 82

Outlet Fittings . . . . . . . . . . . . . . 83 - 90Outlet Fittings Table of Contents . . . . . . . . . . . . . . . . 84Figure 730 Mechanical Tees – Threaded . . . . . . . 85 - 87Figure 730 Mechanical Tees – Grooved . . . . . . . . 88 - 90

Valves & Accessories . . . . . . . . 91 - 138Valves Table of Contents . . . . . . . . . . . . . . . . . . . . . 92Figures 39101 & 39107 . . . . . . . . . . . . . . . . . . . . 93Grooved Butterfly Valve Flow Characteristics . . . . . . . 93Figure 39101HV Butterfly Valve, 10 Position Handle

Lever Operated for HVAC Applications . . . . . . . . . . 94Figure 39101 Butterfly Valve, Lever Operated

for Potable Water Applications. . . . . . . . . . . . . . . . 95Figure 39101N Butterfly Valves,

Lever Operated with Nitrile Disc . . . . . . . . . . . . . . . 96Figure 39107 Butterfly Valves, Gear Operated

for Potable Water Applications. . . . . . . . . . . . . . . . 97Shurjoint Figure SJ-200 Low Profile Butterfly Valve . . . . 98Model B8101 Low Profile Butterfly Valves . . . . . . . . . 99Figure B333 Large Diameter Butterfly Valve . . . 100 - 101Model BV835 Ball Valves . . . . . . . . . . . . . . . 102 - 103Shurjoint Model SJ-500L Ball Valve . . . . . . . . . . . . . 104Shurjoint Model SJ-500W Ball Valve Gear Operated . 105Shurjoint Model SJ-530 Ball Valve (3 Port) . . . . . . . . 106Model CV-1 Grooved End Check Valves . . . . . 107 - 108Shurjoint Model SJ-915 Dual Disc Check Valves 109 - 110CB800 Circuit Balancing Valves (CBV)

Overview & Specifications . . . . . . . . . . . . . . . . . 111Model CB800 (CBV) BSP Threaded Ends . . . . . . . . . 112Model CB800 (CBV) Grooved Ends . . . . . . . . . . . . 113Model CB800 (CBV) Flanged Ends, PN16/10 . . . . . 114Model CB800 (CBV) Flanged Ends, ANSI . . . . . . . . 115Model CB800 (CBV) Solder Ends . . . . . . . . . . . . . . 116Model CB800 (CBV) Insulation Kits . . . . . . . . . . . . . 117Model CB800 (CBV) MC2 Measuring Computer . . . . 117

General notes: Additional information is included in our data sheets and is available upon request. It is the Designer’s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always read and understand the installation constructions. Never remove any piping components nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified with the gasket recommendation listing for the specific application.

Refer to back cover for country-specific contact information

TABLE OF CONTENTS

Table of

Contents

3


Figure 70607 Groove Ended Metering Station . . . . . 118Figure Venturi, Flow Meter

Butt Weld with Grooved Ends. . . . . . . . . . . . . . . . 119Figure 760 WYE-Strainer . . . . . . . . . . . . . . . . . . . . 120Figure S855 Tee Strainers . . . . . . . . . . . . . . . . . . . 121Figure S810 Suction Diffusers. . . . . . . . . . . . . 122 - 123Figure 7550 Expansion Joint . . . . . . . . . . . . . 124 - 129Figure RXAG Expansion Joint . . . . . . . . . . . . . . . . . 130Figure ALG Expansion Joint . . . . . . . . . . . . . . . . . . 131Figure ANS Expansion Joint . . . . . . . . . . . . . . . . . . 132Figure FTU Rubber Bellows ISO R7 Threaded . . . . . . 132Figure FSF Flanged Rubber Bellows . . . . . . . . . . . . . 133Figure UFBX Flexible Hoses . . . . . . . . . . . . . . 134 - 135Figure HERCULES Fix Point . . . . . . . . . . . . . . . . . . 136Figure FAZ Anchor . . . . . . . . . . . . . . . . . . . . . . . . 137Figures 407GT & 407T Dielectric Waterways . . . . . . 138

Stainless Steel Systems . . . . . 139 - 162Stainless Steel Systems Table of Contents . . . . . . . . . 140Coupling Specifications . . . . . . . . . . . . . . . . . . . . . 141Fitting Specifications . . . . . . . . . . . . . . . . . . . . . . . 141Figure 472 Stainless Steel Rigid Couplings . . . . . . . . 142Shurjoint Figure SS-7X Stainless Steel

Rigid Couplings (Large Diameter) . . . . . . . . . . . . . 143Figure 405 Stainless Steel Flexible Couplings . . . . . . 144Shurjoint SS-8X Stainless Steel

Heavy Duty Flexible Coupling . . . . . . . . . . . . . . . 145Shurjoint SS-1200 Stainless Steel

High Pressure Flexible Couplings . . . . . . . . . . . . . 146Figure 705R Rilsan Coated

Flexible Coupling . . . . . . . . . . . . . . . . . . . . . . . . 147Shurjoint SS-28 Stainless Steel

Hinged Lever Coupling . . . . . . . . . . . . . . . . . . . . 148Shurjoint Figure SS-41 Flange Adapters (ANSI) . . . . . 149Figure 443 & 444 Flange Adapters

(PN16/PN10 BS 4504) . . . . . . . . . . . . . . . . . . . 150Figure 410 90° Stainless Steel Elbows . . . . . . . . . . . 151Figure 401 45° Stainless Steel Elbows . . . . . . . . . . . 151Figure 419 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . 152Figure 460 End Caps . . . . . . . . . . . . . . . . . . . . . . 153Figure 421 Reducing Tees . . . . . . . . . . . . . . . . . . . 154Figure 450 Concentric Reducers . . . . . . . . . . . . . . . 155Shurjoint Figure SJ-400 Butterfly Valve . . . . . . . 156 - 157Shurjoint Figure SJ-600L Ball Valve (Lever) . . . . . . . . 158Shurjoint Figure SJ-600W Ball Valve (Gear) . . . . . . . 159Shurjoint Figure SJ-630 Three Port Ball Valve . . . . . . 160Shurjoint Figure SJ-726 Y Strainer . . . . . . . . . . . . . . 161Shurjoint Figure SS-723 Mechanical Tee . . . . . . . . . 162

HDPE Systems . . . . . . . . . . . . 163 - 168HDPE Systems Table of Contents . . . . . . . . . . . . . . . 164Shurjoint Figure 9095 HDPE Couplings

IPS & ISO Pipe Sizes . . . . . . . . . . . . . . . . . 165 - 166Shurjoint Figure 9097 HDPE Transition Couplings

IPS & ISO Pipe Sizes . . . . . . . . . . . . . . . . . . . . . 167Shurjoint Figure 9094 Flange Couplings

IPS (ANSI) & ISO (PN10/16) Pipe Sizes . . . . . . . . 168

Extra Heavy End Protection (EP) Systems . . . . . . . . . . . . . . . . 163 - 168

Extra Heavy Systems Table of Contents . . . . . . . . . . 170Extra Heavy Fittings Specifications . . . . . . . . . . . . . 170Shurjoint Figure XH-70EP Extra Heavy

Rigid Couplings With End Protection (EP) Gasket . . 171Shurjoint Figure 10EP 90° EP Elbows . . . . . . . . . . . 172Shurjoint Figure 11EP 45° EP Elbows . . . . . . . . . . . 172Shurjoint Figure 20EP EP Tee . . . . . . . . . . . . . . . . . 173Shurjoint Figure 35EP EP Cross . . . . . . . . . . . . . . . . 173Shurjoint Figure 22EP EP Header Tee . . . . . . . . . . . . 174

Shouldered Systems . . . . . . . . 175 - 178Shouldered Systems . . . . . . . . . . . . . . . . . . . . . . . 176Table of Contents & Specifications . . . . . . . . . . . . . 176Shurjoint Figure S35 Shouldered Flexible Coupling . . 177Shurjoint Figure SD-28 Shouldered Toggle Coupling . 178

G-MINE PVC Systems . . . . . . . 179 - 194G-MINE PVC Systems Table of Contents . . . . . . . . . . 180G-MINE PVC Systems . . . . . . . . . . . . . . . . . . . . . . 181Figure 72900 SDR Pipe (Spline x Spline) . . . . . . . . . 182Figure 72904 Couplings (Spline x Spline) . . . . . . . . 183Figure 72905 Couplings (Spline x Solvent Weld) . . . 183Figure 72919 Reducing Couplings

(Male Spline x Female Spline) . . . . . . . . . . . . . . . 184Figure 72940 Outlet Couplings

(Male Spline x Female Spline x Female Thread) . . . 184Figure 72930 Outlet Couplings

(Spline x Spline x Female Thread) . . . . . . . . . . . . . 185Figure 72906 Nipples (Spline x Plain End) . . . . . . . . 185Figure 72907 Nipples (Spline x Groove) . . . . . . . . . 186Figure 72908 Nipples (Spline x Male Thread) . . . . . 186Figure 72909 Nipples (Plain End x Male Thread) . . . 187Figure 72911 Nipples (Spline x Spline) . . . . . . . . . . 187Figure 72910 90° Elbows (Spline x Spline) . . . . . . . 188Figure 72912 45° Elbows (Spline x Spline) . . . . . . . 188Figure 72913 90° Sweep Elbows (Spline x Spline) . . 189Figure 72914 45° Sweep Elbows (Spline x Spline) . . 189Figure 72915 Caps & Plugs (Spline) . . . . . . . . . . . . 190Figure 72916 Flange Adapters

(Spline x Flange 150psi) . . . . . . . . . . . . . . . . . . . 190Figure 72917 Tees (Spline x Spline x Spline) . . . . . . 191Figure 72918 Reducing Tees

(Spline x Spline x Spline) . . . . . . . . . . . . . . . . . . 191Model B8200L G-MINE Butterfly Valves

(Spline x Spline) . . . . . . . . . . . . . . . . . . . . . . . . 192Figure 72999 Splines . . . . . . . . . . . . . . . . . . . . . . 193Figure ITGM Insertion Tools . . . . . . . . . . . . . . . . . . 193Figure 72899 Replacement Gaskets . . . . . . . . . . . . 194

Plain End Systems . . . . . . . . . 195 - 206Plain End Systems Table of Contents . . . . . . . . . . . . 196Coupling Specifications . . . . . . . . . . . . . . . . . . . . . 197Fitting Specifications . . . . . . . . . . . . . . . . . . . . . . . 197Figure 909 Plain End Couplings . . . . . . . . . . . . . . . 198Figure 910 90° Plain End Elbows . . . . . . . . . . . . . . 199

www.grinnell.com

TABLE OF CONTENTS

Table of

Contents

4

Figure 901 45° Plain End Elbows . . . . . . . . . . . . . . 199Figure 910LR 90° Plain End Long Radius Elbows . . . . 200Figure 901LR 45° Plain End Long Radius Elbows . . . . 200Figure 919 Plain End Tees . . . . . . . . . . . . . . . . . . . 201Figure 927 Plain End Crosses. . . . . . . . . . . . . . . . . 201Figure 924 Plain End True Wyes. . . . . . . . . . . . . . . 202Figure 960 Plain End Caps . . . . . . . . . . . . . . . . . . 202Figure 921 Plain End Reducing Tees . . . . . . . . . . . . 203Figure 914 Plain End Laterals . . . . . . . . . . . . . . . . . 203Figure 999 Plain End Swaged Nipples . . . . . . . . . . 204Figures 991, 992, 993 Plain End Adapter Nipples . . 205Figure 941 Plain End Flange Adapters

(ANSI Class 150#) . . . . . . . . . . . . . . . . . . . . . . . 206Figure 942 Plain End Flange Adapters

(ANSI Class 300#) . . . . . . . . . . . . . . . . . . . . . . . 206

Ring Joint Systems . . . . . . . . . 207 - 220Ring Joint Table of Contents . . . . . . . . . . . . . . . . . . 208Ring Joint Specifications . . . . . . . . . . . . . . . . . . . . 209Shurjoint Model R-88 Ring Joint Couplings . . . . . . . . 210Shurjoint Model R-88 Ring Joint Couplings . . . . . . . . 211Shurjoint Model R-88 Ring Joint Couplings

Large Diameter . . . . . . . . . . . . . . . . . . . . . . . . . 212Shurjoint Model RH-1000

1000 PSI Ring Joint Couplings . . . . . . . . . . . . . . . 213Shurjoint Model RX-3000

3000 PSI Ring Joint Couplings . . . . . . . . . . . . . . . 214Shurjoint Model RX-3770

3770 PSI Ring Joint Couplings . . . . . . . . . . . . . . . 215Shurjoint Figure RJ-10 90° Ring Joint Elbows . . . . . . 216Shurjoint Figure RJ-11 45° Ring Joint Elbows . . . . . . 217Shurjoint Figure RJ-20 Ring Joint Tee . . . . . . . . . . . . 217Shurjoint Figure RJ-21 Reducing Tees . . . . . . . . . . . . 218Shurjoint Figure RJ-50 Concentric Reducer . . . . . . . . 219Shurjoint Figure RJ-51 Eccentric Reducer . . . . . . . . . 219Shurjoint Figure RJ-60 Ring Joint Cap . . . . . . . . . . . 220Shurjoint Figure RJ-70 Flange Adapter . . . . . . . . . . . 220

Preparation Equipment . . . . . 221 - 232Preparation Equipment Table of Contents . . . . . . . . . 222Pipe Preparation Tools . . . . . . . . . . . . . . . . . . . . . . 223Pipe Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223Figure HCTOOL Hole Cutting Tool . . . . . . . . . . . . . . 224Hole Cutting Tool Spare Parts . . . . . . . . . . . . . . . . . 224Figure PUNCH . . . . . . . . . . . . . . . . . . . . . . . . . . . 225Centre Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225GRINNELL Groove Measurement Tapes . . . . . . . . . . 225GRINNELL Gauges . . . . . . . . . . . . . . . . . . . . . . . . 226Roll Groove Standard Specification

for Steel & Other IPS Pipe . . . . . . . . . . . . . . 227 - 228Cut Groove Standard Specification

for Steel & Other IPS Pipe . . . . . . . . . . . . . . 229 - 230Standard Roll Groove for Large Diameter IPS Pipe . . . 231End Protection (EP) Cut-Groove Specification . . . . . . 232

Gaskets . . . . . . . . . . . . . . . . . 233 - 246GRINNELL Gasket Seal . . . . . . . . . . . . . . . . . . . . . 234GRINNELL Gasket Styles . . . . . . . . . . . . . . . . . . . . 235GRINNELL Gasket Grade & Recommendations . . . . . 236Tri-Seal Freezer Gasket . . . . . . . . . . . . . . . . . . . . . 236GRINNELL Gasket Air, Water & Chemical

Recommendations . . . . . . . . . . . . . . . . . . . 237 - 239GRINNELL Gasket Lubricants . . . . . . . . . . . . . . . . . 240GRINNELL Replacement Gaskets

for Figure 740, 705, 774, 707, 770 & 772 . 241 - 242GRINNELL Replacement Gaskets

for Figure 71, 780, & 909 . . . . . . . . . . . . . . . . . 243GRINNELL Replacement Gaskets for Figure 716 . . . . 244GRINNELL Replacement Gaskets for Figure 730 . . . . 245

Pressure & Design Data . . . . . 247 - 274Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248Thermal Movement . . . . . . . . . . . . . . . . . . . . 249 - 250Misalignment and Deflection . . . . . . . . . . . . . . . . . 251Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . 252Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . 253 - 254Vertical Piping . . . . . . . . . . . . . . . . . . . . . . . . . . . 255Pipe Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256Working Pressure Ratings Bar (psi)

on ISO Size Steel Pipe . . . . . . . . . . . . . . . . 257 - 259Working Pressure Ratings Bar (psi)

on Light Wall Roll Grooved Steel Pipe . . . . . . 260 - 261Maximum Pressure Ratings Bar (psi)

on ANSI 304/316 Stainless Steel . . . . . . . . 262 - 263Maximum Pressure Ratings Bar (psi)

on ISO 304/316 Stainless Steel . . . . . . . . . . 264 - 265Global Pipe Size Designations . . . . . . . . . . . . . . . . 266Flange Drilling Specifications . . . . . . . . . . . . . . . . . 267Metric/Imperial Conversion Chart . . . . . . . . . . . . . . 268Typical General Specification . . . . . . . . . . . . . 268 - 272

Indices . . . . . . . . . . . . . . . . . 273 - 283Keyword Index . . . . . . . . . . . . . . . . . . . . . . . 274 - 277Part Number Index . . . . . . . . . . . . . . . . . . . . 278 - 281Figure Number Index . . . . . . . . . . . . . . . . . . 282 - 283

10-Year Limited Warranty . . . . . . . .283

Contact Information . . . . . . . Back Cover


GENERAL DATA

5

www.grinnell.com

GENERAL DATA

General

Data

6

The products and specifications published herein are for general evaluation and reference purposes only and are subject to change by GRINNELL Mechanical Products without notice. For the most up-to-date information, visit www.grinnell.com. The information provided in this catalogue should not be relied on as a substitute for professional advice concerning specific applications. ALTHOUGH GRINNELL MECHANICAL PRODUCTS ENDEAVORS TO ENSURE ACCURACY, ALL INFORMATION HEREIN IS PROVIDED ON AN “AS IS” BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. Without limiting the foregoing, GRINNELL Mechanical Products does not warrant the accuracy, adequacy, or completeness of any such information. All users of the information provided herein assume the risk of use or reliance on such information and GRINNELL Mechanical Products shall not be liable for any damages for such use including, but not limited to, indirect, special, incidental, or consequential damages. Terms and Conditions of sale can be found on www.grinnell.com.

GRINNELLMECHANICAL PRODUCTS GRINNELL Mechanical Products, a premium brand of Tyco International, represents a complete suite of mechanical building construction solutions for commercial, industrial, institutional, mining, and governmental applications. Available products offer contractors, engineers, and distributors faster, more cost-effective tools for joining pipe over traditional welding methods. These products include Grooved Couplings and Fittings, Butterfly Valves, High-Pressure Ball Valves, Strainers, Circuit Balancing Valves, HDPE Systems, Stainless Steel Systems, and comprehensive, competitively priced engineering and planning support services. In addition to delivering innovative Grooved Piping Solutions, GRINNELL Products are backed by an industry-leading, 10-year Limited Warranty.

Regional Headquarters

Corporate Headquarters

Research and Development

MAKING CONNECTIONS…Global Headquarters Lansdale, Pennsylvania, USA

Research and Development Cranston, Rhode Island, USA

REGIONAL HEADQUARTERS

North Asia Shanghai, China

South Asia Singapore

Australia Sunshine, Victoria

Middle East Dubai, United Arab Emirates

Europe Enschede, The Netherlands Paris, France Manchester, U.K. Rodgau, Germany Budapest, Hungary Milan, Italy Wien, Austria Mechelen, Belgium Madrid, Spain Lørenskog, Norway Lammhult, Sweden

South America, Central America, and Caribbean Pompano, Florida, USA

Mexico Tlalnepantla, Mexico


GENERAL DATA

General

Data

7

BUILDING SOLUTIONS

43 Stocking Warehouses 24 Manufacturing Locations

Presence in 185 Countries and 43 Languages

4,100 Employees in 34 Countries

www.grinnell.com

GENERAL DATA

General

Data

8

Reduced Installation Time and Cost

Pipe grooving reduces installation cost by up to 30%, allowing contractors to minimise labour costs

and remain within budget. Methods such as welding and soldering are labour intensive and can be very

expensive in high-cost regions.

Retrofits and Repairs GRINNELL Couplings and Fittings allow an installer to

fabricate on-site and around complex problems and obstacles. If an owner unable to shut down a facility

for important retrofits, GRINNELL Mechanical Products is the right solution. Fire permits are not required and

building residents do not have to evacuate due to welding fumes.

Pipe Expansion Support GRINNELL Flexible Couplings absorb linear and

angular movements of pipe work due to temperature changes, eliminating or minimizing the use of

braided and bellow type flex connectors. GRINNELL Mechanical Services offers customers assistance

with designing flexible couplings into thermal expansion projects.

Compatibility With Hazardous Environments

Grooved Pipe does not require welding, threading, or cutting, eliminating cutting oils, fumes, and flames. It is the ideal method for joining pipe in enclosed,

flammable, or hazardous sites like tunnels and mines. And it doesn't require burn or hot-works permits.

Connection Consistency When construction calls for robust piping

applications, GRINNELL Grooved Products maintain high pressures at each connection without sacrificing

quality and reliability. GRINNELL Grooved Systems allow for quick assembly that is simple and consistent

from one worker to the next. Projects are completed on time, and crews can readily move on to their

next installations.

No Special Tools Grooved Products are assembled onto a standard groove. No special tools or additional training to

complete the job are required.

Why Grooved?


GENERAL DATA

General

Data

9

The Best Warranty in the Industry GRINNELL Products are backed by a 10-year limited warranty. Our customers are proud to work with products manufactured by a market leader with an established brand name and a consistent history.

GRINNELL Mechanical Services Our Services Group works seamlessly with engineers and contractors to create the most cost- and time-efficient piping solutions from design...to build. Our experts specialise in CAD blocks, cost comparisons, thermal movement analysis, and BIM.

Green Solutions All GRINNELL Mechanical Products cast are manufactured with 90% recycled metal that would otherwise contribute to our nation’s solid waste stream. All waste paper, used cardboard, scrap wood, and EPDM waste from our plants is recycled.

Industry Pioneer GRINNELL Mechanical Products has been in the pipe-joining business for over 160 years. We have strategic stocking locations throughout the world to serve our customers. We have the best channel partners who are focused, as we are, on innovation and growth.

Great Service At GRINNELL Mechanical Services, the customer always comes first. We pride ourselves on providing knowledgeable sales support, timely technical service, and quality customer care to all global customers.

Global Presence You can find our products in buildings and installations all over the world. We provide global solutions that flexibly address the challenges our customers face, including design in one country for construction in another.

Why GRINNELL?

www.grinnell.com

GENERAL DATA

General

Data

10

NOISE AND VIBRATION GRINNELL Grooved Couplings provide excellent noise and vibration dampening. The engineered design of these couplings and gaskets offers pipe end gapping that helps to dissipate, isolate, and minimise noise and vibration transmission throughout the piping system.

DEPENDABILITY The coupling housings are designed to engage into the grooves and provide a secure joint. The pipe ends are sealed by a pressure responsive gasket which is encapsulated by the ductile iron housing.

VERSATILITY GRINNELL flexible couplings will accommodate misalignments. The maximum deflection information per coupling can be found in this catalogue.

SUPERIOR QUALITY GRINNELL Piping Products are manufactured according to the ISO 9001:2008 Quality Assurance standard.

LONGEVITY AND PERFORMANCE GRINNELL Piping Products are designed to last the lifetime of the pipeline and have been tested and approved by prominent approval agencies. Rolled grooving does not remove any metal from the pipe, therefore pipe integrity is fully maintained when grooved systems are used to join pipe.

CLEAN Unlike with welding, GRINNELL Piping Products do not lead to the release of hazardous fumes or to the possible introduction of foreign materials in the pipeline.

Product Features and Benefits


GENERAL DATA

General

Data

11

Agency Listings and Approvals

General Code Groups, Associations, Laboratories, Government Agencies, and Approval Bodies

ACTIVFIREActive Fire Protection Product Certification

AMERICAN BUREAU OF SHIPPING (ABS)

AMERICAN NATIONAL STANDARDS INSTITUTE (ANSI)

AMERICAN WATER WORKS ASSOCIATION (AWWA) AWWA C-606

AMERICAN PETROLEUM INSTITUTE (API)API Std. 5L

AMERICAN SOCIETY OF HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS (ASHRAE)

AMERICAN SOCIETY OF MECHANICAL ENGINEERS (ASME)

Refinery Piping, B-31.3

ASTMAmerican Society of Testing Materials. F-1476 Couplings, F-1548 Fittings

BUILDING CONFIDENCEEmpowered by Achilles

BUILDING OFFICIALS AND CODE ADMINISTRATORS (BOCA)

BUREAU VERITAS (BV)

CERTIFICATION TO EUROPEAN PRESSURE EQUIPMENT DIRECTIVE

CNBOPCentrum Naukowo-Badawcze Ochrony Przeciwpozarowe

CNPP APSADNational Centre for Prevention and Protection (FR)

COAST GUARDApproved each vessel individually

CORPS OF ENGINEERS (COE)GEGS 15000

CRNCanadian Registration Number

CSTBFrench Scientific and Technical Centre for Building

DNVDet Norske Veritas

DVGWDeutscher Verein des Gas-und Wasserfaches e.V.

FACTORY MUTUAL ENGINEERING CORP. (FM)Approved for Fire Protection Services

FEDERAL AVIATION ADMINISTRATION (FAA)HVAC, Plumbing and Fire Protection

FEDERAL HOUSING ADMINISTRATION (FHA)

GENERAL SERVICES ADMINISTRATION (GSA)15000 Series

GERMANISCHER LLOYD

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS (IAPMO)

ICC-ESNational Evaluation Service, Inc.

LLOYD’SLloyd’s Register of Shipping

(LPCB) LOSS PREVENTION CERTIFICATION BOARDApproved for Fire Protection Services

MATERIAL EQUIPMENT AND ACCEPTANCE (MEA)

MILITARY SPECIFICATIONS (MIL)

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION (NASA)

NATIONAL INSTITUTE OF HEALTH (NIH)Department of Health – 5000 Series

NAVAL FACILITIES ENGINEERING COMMAND (NAVFAC) NFGS 15000 Series

NATIONAL FIRE PROTECTION ASSOCIATION (NFPA)

NSF INTERNATIONALThe Public Health and Safety Company

PRESSURE EQUIPMENT DIRECTIVE (PED)

RINARegistro Italiano Navale

SOUTHERN BUILDING CODE CONGRESS INTERNATIONAL (SBCCI)Standard Plumbing

UNDERWRITERS LABORATORIES, INC. (UL)Listed for Fire Protection Services

UNDERWRITERS LABORATORIES OF CANADA (ULC)Listed for Fire Protection Services

UNIFORM PLUMBING CODE (UPC)

VERBAND DER SACHVERSICHERE E.V. (VDS)Approved for Fire Protective Service

VETERANS AFFAIRS (VA)15000 Series

WATERMARKStandards Australia Limited

WRASWater Regulations Advisory Scheme (UK)

WSDPending Approved for Potable Water Service (HK)

Our products are associated with the following agencies, associations and laboratories. contact GRINNELL for specific listings, approvals and certifications.

97/23/EC

Issue 03, 04, 07Cert No. 570, 669, 673

www.grinnell.com

GENERAL DATA

General

Data

12

Product Design and Testing

Pre-Manufactured/Product DesignAll GRINNELL Products are designed and tested at our state-of-the-art Research and Development Technology Centre.

CastingGRINNELL castings poured at our foundries are made of ductile iron ASTM A536m, Grade 65-45-12. A rigorous quality control programme monitors all steps of the manufacturing process. Samples are continuously tested, chemically and physically, to ensure all products meet our high material specifications.

Rubber InjectionWe manufacture our gaskets using rubber injection presses and tooling to mould different types of rubber compounds specifically designed for the many applications required by our customers. Physical tests are performed on finished gasket samples to verify compliance with specifications including ASTM D 2000.

Paint ProcessUsing a computer controlled process, each product is spray-washed, dried, preheated, dipped, and fully cured prior to assembly or packaging. All integral parts are inspected to maintain consistent paint coverage and surface condition

ToolingUsing product designs from our Research and Development Department, our pattern centre and contracted pattern makers design and build patterns and moulds that produce products to the highest tolerances. Tooling is continually inspected by our in-house certified specialists to ensure finished products meet our specifications and requirements of approving agencies.

Foundry and Assembly


GENERAL DATA

General

Data

13

ISO 9001:2008 Certified

© BRE Global Ltd, 2009

Certificate of Quality SystemRegistration

TYCO FLOW CONTROL (M) SDN. BHD.(TYCO FIRE SUPPRESSION & BUILDING PRODUCTS, MALAYSIA)

Lot 886, C1 & C2, Jalan Subang 9, Taman Perindustrian Subang,47500 Subang, Selangor, Malaysia

has complied with the requirements of the following:

ISO 9001:2008

and is authorised to use the LPCB mark on stationeryand publications related to the following products

and/or services

Assembly of couplings and marketing of couplings and fittings.

T A Hunter

for and on behalf of LPCB

Certificate No: 673

Issue Number: 03

Date of Issue: 03 December 2010

Date of Expiry: 02 December 2013

LPCB is part of BRE Global Limited, Watford, WD25 9XX T: +44 (0)1923 664100 F: +44 (0)1923 664910 W: www.redbooklive.com

This certificate remains the property of BRE Global Ltd and is issued subject to terms and conditions. It is maintained and held in forcethrough at least annual review and verification. To check the validity of this certificate, please visit www.redbooklive.com or contact us.

www.grinnell.com

GENERAL DATA

General

Data

14

Tyco Acquires Shurjoint

In April of 2012 Tyco acquired Shurjoint, broadening its grooved product portfolio and expertise in innovative mechanical solutions. Shurjoint allows Tyco to improve service to the HVAC, mining, oil and gas, and industrial markets.

About Shurjoint

Shurjoint Piping Products has offered quality grooved piping solutions since 1974. To date, Shurjoint has developed and currently offers 3,000 individual piping components in 15 to 2400mm ( 1⁄2" to 96" ) sizes, for use with a variety of piping materials including carbon steel, stainless steel, ductile iron, PVC, HDPE, and CPVC. Shurjoint continuously invests in research, engineering and development, resulting in innovative products and new solutions for the changing needs of the industry.

The synergies of joining Tyco and Shurjoint Piping Products will result in true value to customers by broadening the product portfolio and engineering expertise. To learn more about Shurjoint Piping Products, visit www.shurjoint.com. Taipei 101, 509.2M, the world tallest building 2004 - 2010

Typical Applications

HVAC Reverse Osmosis

Fire Protection Desalination

Water Supply & Treatment Mining & Tunnel Boring

Plumbing Marine

Municipal Gas

Food Processing Chemical

Pulp & Paper Oil

Agriculture Air


GENERAL DATA

General

Data

15

Digits 01, 02, & 03: Figure number

Digit 04: Internal Code

Digit 05: Gasket: E for C-style EPDM (Grade E) T for Tri-Seal EPDM (Grade E) B for C-style Nitrile/Buna-N (Grade T) D for C-style EPDM

(Grade EN, suitable for potable water applications)

V for C-style Fluoro Elastomer (Grade O) S for C-style Silicone (Grade L) Digits 06 thru 09: Size

Digit 10: Finish: 0 for Painted Orange 1 for Painted Red (RAL 3000) 2 for Galvanised 3 for Unpainted 4 for Stainless Steel 316 5 for Painted White (RAL 9010) R for Rilsan

Outlet Fitting DIGIT 05

T = BSP threadN = NPT threadG = Grooved

Outlet Fitting Part Number Example:

730AG63261:

Fig. Number Internal Code Outlet Size Finish

Figure number: 730 · Mechanical TeeInternal Code: AOutlet: G · Grooved (T for BSP Thread; N for NPT Thread)Size: 6326 - 168.3 x 76.1mm (6" x 2 1⁄2")Finish: 1 · Painted Red“All Mechanical Tees have standard EPDM Gaskets. Nitrile (Buna-N) optional”

Coupling Part Number Example:

774ME00891:

Fig. Number Internal Code Gasket Size Finish

Figure Number: 774 · Rigid Standard Weight CouplingInternal Code: MGasket: E · EPDM C-styleSize: 0089 · 88.9mm (3" )Finish: 1 · Painted Red

How to Build GRINNELL Part Numbers

Pipe Size Digits 06-07-08-09

Nominal mm

Inches

O.D.mm

Inches

Sizes Codes for Outlet Fittings

& Reducers

Example: 4” x 2” 4220 (Biggest Size First)

Sizes Codes for Couplings & Fittings

15 21.305 n/a 1

2 0.840

20 26.907 n/a 3

4 1.050

25 33.710 0034

1 1.31532 42.4

12 00421 1

4 1.66040 48.3

15 00481 1

2 1.900

50 60.320 0060

2 2.37565 73.0

25 00732 1

2 2.87565 76.1

26 007676.1mm 3.000

80 88.930 0089

3 3.500100 108.0

41 0108108.0mm 4.252

100 114.342 0114

4 4.500125 133.0

51 0133133.0mm 5.236

125 139.752 0139

139.7mm 5.500125 141.3

53 01415 5.563

150 159.061 0159

159.0mm 6.260150 165.1

62 0165165.1mm 6.500

150 168.363 0168

6 6.625200 219.1

80 02198 8.625

250 273.011 0273

10 10.750300 323.9

13 032412 12.750

350 355.614 0355

14 14.000400 406.4

16 040616 16.000

450 457.218 0457

18 18.000500 508.0

21 050820 20.000600 609.6

24 061024 24.000

FinishSizeGasket

Internal Code

Figure No.

7 7 4 M E 0 0 8 9 1

www.grinnell.com

GENERAL DATA

General

Data

16

GRINNELL Websitewww.grinnell.com

Literature TabThe Literature tab showcases all marketing materials for viewing, downloading, or saving to your preferred location. Marketing literature includes catalogues, brochures, installation manuals, flyers, and price books.

Tech DataThe Tech Data icon provides direct access to technical information on all of our products. It also provides access to online registration for automatic e-mail updates.

Resources Tab Useful for everyday operations, the Resources tab includes a conversion calculator to convert many units of measurement and a Product Cross Reference tool to search for GRINNELL Mechanical Product equivalents.

To learn more about GRINNELL Mechanical Products, visit www.grinnell.com. Our Website provides a wide variety of tools and information at your fingertips.

Please select the EMEA region on the map to see region specific information.

Browse These Website Features

GRINNELL Home Page

Products Tab The Products tab organizes all product information such as pricing, technical data, 3D CAD drawings, and part summary sheets. All product information is available for printing and saving to your preferred location. Searching for any product by name or figure number and downloading custom submittal sheets are also available through this tab.

GROOVED COUPLINGS

17

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings

GRINNELL reserves the right to change the contents without notice.18

GRINNELL Couplings are designed for grooved end pipe and are available in nominal sizes of 25 to 600mm (1" to 24") including BS, ISO, and JIS outside diameters.

The GRINNELL Coupling Design provides economical advantages when compared to welded or flanged systems. GRINNELL Couplings provide a universal method for connecting pipe, fittings, and pipe system components.

GRINNELL Couplings and Gaskets permit a wide selection of combinations for specific applications.

Field modifications are easily accommodated with GRINNELL Mechanical Products as the couplings can be easily rotated, eliminated and/or added to facilitate necessary modifications.

Grooved Couplings Table of Contents


Figure 772Rigid CouplingsPages 20 - 21

Figure 740Rapid Installation Pivot-Bolt

(GRIP) Rigid CouplingsPage 22

Figure 774Rigid Couplings

Page 23

Figure 705Flexible Couplings

Page 24

Figure 770High Pressure Rigid Couplings

Page 25

Figure 707Heavy Duty

Flexible CouplingsPages 26 - 27

Figure 707LLarge Diameter

CouplingsPage 28

Figure 7707 NLarge Diameter

Flexible CouplingsPage 29

Figure 909Plain End Couplings

Page 30

Figure 780Grooved Snap Couplings

Page 31

Figure XH-70EPExtra Heavy Rigid Couplings

With End Protection (EP) GasketPages 32 & 171

Figure 716Flexible Reducing Couplings

Page 33

Figure 702Mechanical Outlet Couplings

Pages 34 - 35

Figure 7706-TTransition Couplings

Page 36

Electrical ContinuityPage 37


GROOVED COUPLINGS

Grooved

Couplings

19

Full contact between Figure 772 Coupling key and groove diameter

Ductile Iron Housing Specifications

castings, Grade 65-45-12

(65,000 psi)

(45,000 psi)

galvanizing

Bolt/Nut SpecificationsMetric: Carbon steel oval neck track head bolts (Gold colour coded) are heat treated and conform to the physical properties of ASTM F 568M with a minimum tensile strength of 760 MPa. Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 563 M Class 9. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

ANSI: Carbon steel oval neck bolts and nuts are heat-treated and conform to the physical properties of ASTM A 183 Grade 2 and SAE J429 Grade 5 with a minimum tensile strength of 7584 Bar (110,000 psi). Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 183 Grade 2 and SAE J995 Grade 5. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

request.

Coatings

GRINNELL Coupling Gasket Specificationsgaskets have a Green colour

code stripe identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C ( -30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services. For low temperature and vacuum systems, a Tri-Seal Grade “E” EPDM gasket with a rigid coupling is recommended.

gaskets have an Orange colour code stripe identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C ( -20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapors.

gaskets are Red colour code stripe and conform to ASTM D 2000 for service temperatures from -34°C to 177°C ( -30°F to 350°F). They are recommended for air without hydrocarbons, or dry heat.

gaskets have a Blue colour code stripe and conform to ASTM D 2000 for service temperatures from -7°C to 149°C (+20°F to 300°F). They are recommended for oxidizing acids, petroleum products, hydraulic fluids, lubricants, and halogenated hyrdrocarbons.

gaskets have a Yellow and Green colour code stripe and are for potable water systems up to 82°C (180°F). They are not recommended for petroleum service.

NSF-61 Certified centre-stop, push-on style gaskets have a Green and Red colour code stripe. For closed-loop heating systems from -34°C to 120°C (-30°F to 250°F) and potable water systems up to 82°C (up to 180°F). Recommended for use in low temperature and vacuum systems. They are not recommended for petroleum service.

MATERIAL SPECIFICATIONS

Additional Features:

special tools.

Limited Warranty, except for G-MINE which is 6 months. Review terms and conditions of sale on www.grinnell.com.

* Shurjoint product specifications can be found at www.shurjoint.com

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Figure 772 Rigid Couplings(Page 1 of 2)

Tech Data Sheet: G141The GRINNELL Figure 772 Rigid Coupling provides a rigid joint by firmly gripping along the full 360° circumference of the pipe grooves. This coupling offers a dependable method of joining pipe and is an economical alternative to welding, threading, or using flanges. The GRINNELL Figure 772 Rigid Coupling is UL Listed for grounding and bonding, and is suitable for bonding systems with a maximum service entrance capacity of 200 amps. Sizes 32 – 200mm (1 1⁄4" – 8") feature a clamshell design that makes installation easier and faster.

A

CB

A

B CB

A

C

32mm - 350mm (114" - 14") 400mm - 450mm (16" - 18") 500mm - 600mm (20" - 24")

Part Number Pipe Size Max.†Pressure

Barpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap mm

Inches

Dimensions Coupling Bolts Approx.Weight

Kg.Lbs.

Grade “E” Gasket

Grade “E” Tri-Seal Gasket

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesQty.

Sizemm

Inches

772ME0042 772MT004232 42.4 51.7 7.22 1.5 69.9 111.3 46.0

2M10 x 57 0.5

1 14 1.660 750 1,623 0.06 2.75 4.38 1.81 3

8 x 2 14 1.0

772ME0048 772MT004840 48.3 51.7 9.46 2.0 76.2 117.3 46.0

2M10 x 57 0.5

1 12 1.900 750 2,127 0.08 3.00 4.62 1.81 3

8 x 2 14 1.0

772ME0060 772MT006050 60.3 51.7 14.78 4.8 86.6 145.0 48

2M12 x 76 1.3

2 2.375 750 3,323 0.188 3.41 5.70 1.9 12 x 3 2.9

772ME0073 772MT007365 73.0 51.7 21.66 4.8 100.8 160.0 48

2M12 x 76 1.5

2 12 2.875 750 4,869 0.188 3.97 6.30 1.9 1

2 x 3 3.3

772ME0076 772MT007665 76.1 51.7 23.58 4.8 104.1 163.0 48

2M12 x 76 1.6

76,1mm 3.000 750 5,301 0.188 4.10 6.43 1.9 – 3.6

772ME0089 772MT008980 88.9 51.7 32.10 4.8 116.8 176.0 48

2M12 x 76 1.7

3 3.500 750 7,216 0.188 4.60 6.93 1.9 12 x 3 3.7

772ME0114 772MT0114100 114.3 51.7 53.06 4.8 147.6 205.0 48

2M12 x 76 2.0

4 4.500 750 11,928 0.188 5.81 8.07 1.9 12 x 3 4.3

772ME0139 772MT0139125 139.7 51.7 79.26 4.8 178.3 246.9 52.3

2M16 x 83 3.4

139,7mm 5.500 750 17,819 0.19 7.02 9.72 2.06 – 7.5

772ME0141 772MT0141125 141.3 51.7 81.09 4.8 180.1 246.6 51.8

2M16 x 83 3.4

5 5.563 750 18,229 0.19 7.09 9.71 2.04 58 x 3 1

4 7.5

772ME0165 772MT0165150 165.1 48.3 103.18 4.8 205.5 267.5 54.1

2M16 x 83 3.4

165,1mm 6.500 700 23,228 0.19 8.09 10.53 2.13 – 7.6

772ME0168 772MT0168150 168.3 48.3 107.34 4.8 205.5 267.5 54.1

2M16 x 83 3.4

6 6.625 700 24,130 0.19 8.09 10.53 2.13 58 x 3 1

4 7.6

772ME0219 772MT0219200 219.1 41.4 155.94 4.8 268.2 344.4 66.5

2M20 x 121 8.2

8 8.625 600 35,056 0.19 10.56 13.56 2.62 34 x 4 3

4 18.0

For detailed Listing / Approval information contact GRINNELL Mechanical Products.

Issue 03, 04, 07Cert No. 570, 669, 673


GROOVED COUPLINGS

Grooved

Couplings

21

Figure 772 Rigid Couplings(Page 2 of 2)

Tech Data Sheet: G141

A

CB

A

B CB

A

C

32mm - 350mm (114" - 14") 400mm - 450mm (16" - 18") 500mm - 600mm (20" - 24")

Part Number Pipe Size Max.†Pressure

Barpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap mm

Inches


Kg.Lbs.



Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesQty.

Sizemm

Inches

772ME0273 772MT0273250 273.0 34.5 201.87 3.3 326.1 416.8 66.5

2– 11.2

10 10.750 500 45,381 0.13 12.84 16.41 2.62 1 x 6 12 24.6

772ME0324 772MT0324300 323.9 27.6 227.17 3.3 391.4 478.5 66.5

2– 19.1

12 12.750 400 51,071 0.13 15.41 18.84 2.62 1 x 6 12 42.0

772AE0355 772AE0355350 355.6 20.7 205.43 3.3 423.7 517.6 74.4

2– 21.7

14 14.000 300 46,181 0.13 16.68 20.38 2.93 1 x 5 12 48.0

772AE0406 772AE0406400 406.4 20.7 268.31 3.3 469.9 575.1 74.4

3– 23.6

16 16.000 300 60,319 0.13 18.50 22.64 2.93 1 x 5 12 52.1

772AE0457 772AE0457450 457.2 20.7 339.58 6.4 541.3 638.0 77.7

3– 30.8

18 18.000 300 76,341 0.25 21.31 25.12 3.06 1 x 5 12 68.0

772AE0508 772AE0508500 508.0 20.7 419.23 6.4 596.9 708.2 77.7

4– 40.4

20 20.000 300 94,248 0.25 23.50 27.88 3.06 1 18 x 5 3

4 89.0

772AE0610 772AE0610600 609.6 17.2 503.08 6.4 701.8 812.8 81.0

4– 43.5

24 24.000 250 113,097 0.25 27.63 32.00 3.19 1 18 x 5 3

4 96.0

= 1 for red paint finish, 2 for hot dipped galvanised finish* Maximum available gap between pipe ends. Minimum gap = 0.† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ

for other pipe materials and/or wall thicknesses. Contact a GRINNELL Sales Representative for details. ‡ Max End Gap is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.

The Fig. 772 Heavy Duty Rigid Coupling does not provide compensation for pipe system expansion and/or contraction associated with pipe system temperature changes.

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Figure 740 Rapid Installation Pivot-Bolt (GRIP) Rigid CouplingsTech Data Sheet: G144

The Figure 740 GRINNELL Rapid Installation Pivot-Bolt (GRIP) Rigid Coupling, provides a rigid joint in one tenth the time of traditional joining methods and in half the time of standard grooved Couplings.

Figure 740 GRIP Couplings are a proven, dependable, and more efficient method of joining pipe. Simply push the EHT gasket onto the pipe, swing the coupling body over the gasket, and tighten only one bolt. In comparison with other installation-ready couplings, the Figure 740 GRIP Coupling allows clear visual confirmation that the gasket is properly seated on the gasket sealing surfaces.

Certified toNSF/ANSI 61

For detailed Listing / Approval information contact

GRINNELL Mechanical Products

B C

A

PIVOTBOLT

COUPLINGBOLT

Part Number

Pipe Size Max.†Pressures

Barpsi

Max.†End Load

kNLbs.

Max. End Gap mm

Inches

Dimensions Pivot Bolts Size

InchesDia x Lg.

Coupling Bolts Size

InchesDia x Lg.

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

740AE0060*50 60.3 51.7 14.78 8.3 84.5 147.8 53.8 1⁄ 2 x 3- 3 ⁄4 1⁄ 2 x 3- 5 ⁄ 8

1.52 2.375 750 3,323 0.33 3.33 5.82 2.12 3.3

740AE0073*65 73.0 51.7 21.66 8.3 97.3 160.3 53.8 1⁄ 2 x 3- 3 ⁄4 1⁄ 2 x 3- 5 ⁄ 8

1.62 1

2 2.875 750 4,869 0.33 3.83 6.31 2.12 3.5

740ME0076*65 76.1 8.3 100.5 163.5 54.1 1⁄ 2 x 3- 3 ⁄4 1⁄ 2 x 3- 5 ⁄ 8

1.676.1mm 3.000 0.33 3.96 6.44 2.13 3.6

740AE0089*80 88.9 51.7 32.10 8.3 112.8 175.8 54.4 1⁄ 2 x 3- 3 ⁄4 1⁄ 2 x 3- 5 ⁄ 8

1.73 3.500 750 7,216 0.33 4.44 6.92 2.14 3.7

740AE0114*100 114.3 51.7 53.06 9.8 145.6 205.7 56.4 1⁄ 2 x 3- 3 ⁄4 1⁄ 2 x 3- 5 ⁄ 8

2.34 4.500 750 11,928 0.39 5.73 8.10 2.22 5.0

740ME0139*125 139.7 9.8 169.7 244.9 58.7 5 ⁄ 8 x 4- 1⁄ 2

5 ⁄ 8 x 4- 1⁄ 23.5

139.7mm 5.500 0.39 6.68 9.64 2.31 7.7

740AE0141*125 141.3 51.7 81.09 9.8 172.4 246.6 58.7 5 ⁄ 8 x 4- 1⁄ 2

5 ⁄ 8 x 4- 1⁄ 23.5

5 5.563 750 18,229 0.39 6.79 9.71 2.31 7.7

740ME0165*150 165.1 9.8 198.4 270.8 58.9 5 ⁄ 8 x 4- 1⁄ 2

5 ⁄ 8 x 4- 1⁄ 23.9

165.1mm 6.500 0.39 7.81 10.66 2.32 8.6

740AE0168*150 168.3 48.2 107.34 9.8 201.7 274.1 58.9 5 ⁄ 8 x 4- 1⁄ 2

5 ⁄ 8 x 4- 1⁄ 23.9

6 6.625 700 24,130 0.39 7.94 10.79 2.32 8.6

740AE0219*200 219.1 41.4 155.94 11.3 256.3 326.1 71.9 5 ⁄ 8 x 4- 1⁄ 2

5 ⁄ 8 x 4- 1⁄ 25.8

8 8.625 600 35,056 0.45 10.09 12.84 2.83 12.8

= 1 for red paint finish,or 2 for hot dipped galvanised finish† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ

for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. Contact a GRINNELL Sales Representative for more information.

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


GROOVED COUPLINGS

Grooved

Couplings

23

Figure 774 Rigid CouplingsTech Data Sheet: G135

Part Number Pipe SizeMax.†

PressuresBarpsi

Max.†End

LoadkN

Lbs.

Max.*‡ End Gap

mmInches

Dimensions Coupling Bolts

Size **(Qty 2)

mmInches

Approx.Weight

kgLbs.



Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

774ME0034 774MT003425 33.7 34.5 2.11 1.5 41 100 42 M10 x 57 0.551 1.315 500 475 0.06 1.63 3.92 1.65 3

8 x 2 14 1.2

774ME0042 774MT004232 42.4 34.5 3.37 1.5 68 112 42 M10 x 57 0.59

1 14 1.660 500 757 0.06 2.66 4.40 1.64 3

8 x 2 14 1.3

774ME0048 774MT004840 48.3 34.5 4.41 1.5 74 118 42 M10 x 57 0.68

1 12 1.900 500 992 0.06 2.90 4.66 1.66 3

8 x 2 14 1.5

774ME0060 774MT006050 60.3 34.5 6.90 1.5 86 132 43 M10 x 57 0.822 2.375 500 1,551 0.06 3.38 5.20 1.70 3

8 x 2 14 1.8

774ME0073 774MT007365 73.0 34.5 10.11 1.5 99 143 44 M10 x 57 0.91

2 12 2.875 500 2,272 0.06 3.88 5.64 1.75 3

8 x 2 14 2.0

774ME0076 774MT007665 76.1 34.5 11.01 1.5 102 147 44 M10 x 57 0.91

76.1mm 3.000 500 2,474 0.06 4.00 5.78 1.75 – 2.0

774ME0089 774MT008980 88.9 34.5 14.98 1.5 114 161 44 M10 x 57 1.503 3.500 500 3,367 0.06 4.50 6.33 1.75 3

8 x 2 14 3.3

774ME0114 774MT0114100 114.3 34.5 21.22 1.5 145 191 46 M10 x 57 1.504 4.500 500 4,771 0.06 5.70 7.50 1.83 3

8 x 2 14 3.3

774ME0139 774MT0139125 139.7 34.5 31.71 3.2 173 222 49 M12 x 76 2.41

139.7mm 5.500 500 7,127 0.125 6.80 8.75 1.91 – 5.3

774ME0141 774MT0141125 141.3 34.5 32.43 3.2 174 224 49 M12 x 76 2.415 5.563 500 7,290 0.125 6.86 8.82 1.91 1

2 x 3 5.3

774ME0165 774MT0165150 165.1 34.5 44.28 3.2 198 248 49 M12 x 76 2.59

165.1mm 6.500 500 9,955 0.125 7.80 9.75 1.91 – 5.7

774ME0168 774MT0168150 168.3 34.5 46.00 3.2 215 251 49 M12 x 76 2.696 6.625 500 10,341 0.125 8.47 9.88 1.91 1

2 x 3 5.9

774ME0219 774MT0219200 219.1 27.5 77.97 3.2 260 325 61 M16 x 83 5.328 8.625 400 17,528 0.125 10.25 12.78 2.40 5

8 x 3 14 11.7

774ME0273 774MT0273250 273.0 16.0 70.7 6.4 318 419 65 M20 x 121 8.8610 10.750 233 15,883 0.25 12.50 16.50 2.56 3

4 x 4 34 19.5

774ME0324 774MT0324300 323.9 12.0 99.4 6.4 368 470 65 M20 x 121 10.0012 12.750 175 22,343 0.25 14.50 18.50 2.56 3

4 x 4 34 22.0

The 774 Coupling will be available from Sept. 2013 – For information on alternative product, contact a GRINNELL Sales Representative

= 1 for red paint finish, 2 for hot dipped galvanised finish, or 5 for painted white RAL 9010 coating* Maximum available gap between pipe ends. Minimum gap = 0.† Maximum Pressure and End Load are total from all loads based on on standard weight steel pipe. Pressure ratings and end loads may

differ for other pipe materials and/or wall thicknesses. Contact a GRINNELL Sales Representative for details. ‡ Max End Gap is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.

** Gold colour coded metric bolt sizes for 25mm - 300mm couplings are available upon request.The Fig. 774 Standard Weight Rigid Coupling does not provide compensation for pipe system expansion and/or contraction associated with

pipe system temperature changes. For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

The GRINNELL Figure 774 Grooved Rigid Coupling provides a rigid joint by firmly gripping along the full circumference of the pipe grooves. Figure 774 Grooved Rigid Couplings are a proven dependable method of joining pipe and are an economical alternative to welding, threading, or using flanges. It is capable of pressures up to 34.5 Bar (500 psi) depending on pipe size and wall thickness when used in fire protection services.

CB

A


Issue 03, 04, 07Cert No. 570, 669, 673

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


B C

A

Figure 705 Flexible CouplingsTech Data Sheet: G110 The GRINNELL Figure 705 Flexible Coupling allows for angular and linear

deflection, thermal expansion and contraction, and misalignments of pipe. It is capable of pressures up to 34.5 Bar (500 psi), depending on pipe size and wall thickness. Suitable for use in a variety of applications, the GRINNELL Figure 705 Coupling provides a dependable method of joining pipe.

Part Number Pipe SizeMax.†

PressureBarpsi

Max.†End

LoadkN

Lbs.

Max.*‡ End Gap mmIn.

Deflection ‡ Dimensions - mm In. Coupling Bolts Size

(Qty 2) mmIn.

Approx.Weight

kgLbs.



Nominal DNIn.

O.D.mmIn.

Deg.Per

Coupling

mm/mIn./Ft

A B C

705ME0034 705MT003425 33.7 34.5 1.86 3.3

5° 30'96.7 56.9 100.1 46.0 M10 x 57 0.6

1 1.315 500 410 0.13 1.16 2.24 3.94 1.81 38 x 2 1

4 1.3

705ME0042 705MT004232 42.4 34.5 4.81 3.3

4° 19'75.0 65.0 106.4 46.0 M10 x 57 0.7

1 14 1.660 500 1,082 0.13 0.90 2.56 4.19 1.81 3

8 x 2 14 1.5

705ME0048 705MT004840 48.3 34.5 6.30 3.3

3° 46'65.8 69.9 112.8 46.0 M10 x 57 0.7

1 12 1.900 500 1,418 0.13 0.79 2.75 4.44 1.81 3

8 x 2 14 1.6

705ME0060 705MT006050 60.3 34.5 9.85 3.3

3° 1'52.5 82.6 124.0 47.8 M10 x 57 0.8

2 2.375 500 2,215 0.13 0.63 3.25 4.88 1.88 38 x 2 1

4 1.7

705ME0073 705MT007365 73.0 34.5 14.43 3.3

2° 29'43.3 93.7 139.7 47.8 M10 x 57 0.9

2 12 2.875 500 3,246 0.13 0.52 3.69 5.50 1.88 3

8 x 2 14 2.0

705ME0076 705MT007665 76.1 34.5 15.72 3.3

2° 23'41.7 101.6 146.10 47.8

M12 x 761.4

76.1mm 3.000 500 3,534 0.13 0.50 4.00 5.75 1.88 3.0

705ME0089 705MT008980 88.9 34.5 21.39 3.3

2° 3'35.8 111.3 165.1 47.8 M12 x 89 1.4

3 3.500 500 4,811 0.13 0.43 4.38 6.50 1.88 12 x 3 3.1

705ME0108 705MT0108100 108.0 34.5 31.55 6.4

3° 22'58.3 140.0 191.0 52.0 M12 x 76 1.9

108.0mm 4.252 500 7,093 0.25 0.70 5.51 7.52 2.05 4.2

705ME0114 705MT0114100 114.3 34.5 35.35 6.4

3° 11'55.8 144.5 196.9 52.3 M12 x 89 1.8

4 4.500 500 7,952 0.25 0.67 5.69 7.75 2.06 12 x 3 4.0

705ME0133 705MT0133125 133.0 31.0 43.33 6.4

2° 44'46.7 167.0 241.0 52 M16 x 83 3.3

133.0mm 5.236 450 9,741 0.25 0.56 6.57 9.49 2.05 – 7.2

705ME0139 705MT0139125 139.7 31.0 47.56 6.4

2° 36'45.5 173.0 247.7 52.3 M16 x 83 3.3

139.7mm 5.500 450 10,691 0.25 0.55 6.81 9.75 2.06 – 7.2

705ME0141 705MT0141125 141.3 31.0 48.63 6.4

2° 35'45.0 174.8 247.7 52.3 M16 x 83 3.2

5 5.563 450 10,938 0.25 0.54 6.88 9.75 2.06 58 x 3 1

4 7.1

705ME0159 705MT0159150 159.0 31.0 61.41 6.4

2° 35'40.0 192.0 261.9 52.3 M16 x 83 3.4

159.0mm 6.260 450 13,806 0.25 0.48 7.56 10.31 2.06 – 7.4

705ME0165 705MT0165150 165.1 31.0 66.36 6.4

2° 12'38.3 196.9 271.5 52.3 M16 x 83 3.2

165.1mm 6.500 450 14,932 0.25 0.46 7.75 10.69 2.06 – 7.1

705ME0168 705MT0168150 168.3 31.0 68.97 6.4

2° 10'37.5 201.7 271.5 52.3 M16 x 83 3.2

6 6.625 450 15,512 0.25 0.45 7.94 10.69 2.06 58 x 3 1

4 7.1

705ME0219 705MT0219200 219.1 31.0 116.89 6.4

1° 40'29.2 258.8 344.4 63.5 M20 x 121 6.6

8 8.625 450 26,292 0.25 0.35 10.19 13.56 2.50 34 x 4 3

4 14.5

705ME0273 705MT0273250 273.0 24.1 141.31 6.4

1° 20'23.3 322.3 416.1 66.8 – 12.7

10 10.750 350 31,767 0.25 0.28 12.69 16.38 2.63 1 x 6 12 28.0

705ME0324 705MT0324300 323.9 24.1 198.78 6.4

1° 7'19.2 379.5 479.6 66.8 – 16.6

12 12.750 350 44,687 0.25 0.23 14.94 18.88 2.63 1 x 6 12 36.5

= 1 for red paint finish, 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating* Maximum available gap between pipe ends. Minimum gap = 0.† Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ

for other pipe materials and/or wall thickness. Contact GRINNELL Products for details. ‡ Max end gap and deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Issue 03, 04, 07Cert No. 570, 669, 673


GROOVED COUPLINGS

Grooved

Couplings

25

Figure 770 High Pressure Rigid CouplingsTech Data Sheet: G138

The Figure 770 Rigid Coupling provides a rigid joint by firmly gripping along the circumference of the pipe grooves. This coupling offers a dependable method for joining pipe and is an economical alternative to welding, threading, or using flanges. It is capable of pressures up to 68.9 Bar (1000 psi) depending on pipe size and wall thickness.

C

A

B

Additional Features:

provides a strong rigid connection.

Warranty.

Part Number


Barpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches

Dimensions - mm Inches Coupling Bolts Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C Qty.

Sizemm

Inches

770AE006050 60.3 68.9 19.71 3.6 89.7 145.3 47.8

2M16 x 70 2.0

2 2.375 1000 4,430 0.14 3.53 5.72 1.88 58 x 2 3

4 4.3

770AE007365 73.0 68.9 28.88 3.6 103.1 152.4 47.8

2M16 x 89 2.3

2 12 2.875 1000 6,492 0.14 4.06 6.00 1.88 5

8 x 3 12 5.0

770AE008980 88.9 68.9 42.79 3.6 121.4 171.7 47.8

2M16 x 89 2.4

3 3.500 1000 9,621 0.14 4.78 6.76 1.88 58 x 3 1

2 5.3

770AE0114100 114.3 68.9 70.74 6.4 152.7 215.9 53.3

2M20 x 108 3.5

4 4.500 1000 15,904 0.25 6.01 8.50 2.10 34 x 4 1

4 7.7

770AE0168150 168.3 68.9 153.33 6.4 216.2 285.8 53.3

2M22 x 140 7.3

6 6.625 1000 34,472 0.25 8.51 11.25 2.10 78 x 5 1

2 16.2

770AE0219200 219.1 55.2 207.90 6.4 277.6 349.3 66.0

2– 10.9

8 8.625 800 46,741 0.25 10.93 13.75 2.60 1 x 5 12 24.0

770AE0273250 273.0 55.2 322.97 6.4 341.9 406.4 66.0

2– 14.5

10 10.750 800 72,610 0.25 13.46 16.00 2.60 1 x 6 12 32.0

770AE0324300 323.9 55.2 454.32 6.4 394.2 457.2 66.0

2– 18.1

12 12.750 800 102,141 0.25 15.52 18.00 2.60 1 x 6 12 40.0


for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. ‡ Max End Gap and Deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Figure 707 Heavy Duty Flexible Couplings(Page 1 of 2)


C

A

B

CB

A

CB

A

25mm - 350mm (1" - 14") 400mm - 450mm (16" - 18") 500mm - 600mm (20" - 24")

Part Number

Pipe SizeMax.†

PressureBarpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap mm

Inches

Deflection ‡ Dimensions - mm In. Coupling BoltsApprox.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

DegreesPer

Coupling

mm/mInches/Ft A B C Qty.

Sizemm

Inches

707AE003425 33.7 68.9 6.10 3.3

5° 26'98.4 60.5 101.6 46.0

2M12 x 89 0.9

1 1.315 1000 1,360 0.13 1.14 2.38 4.00 1.81 12 x 3 2.0

707ME004232 42.4 68.9 9.63 3.3

4° 19'75.0 70.0 111.0 46.0

2M12 x 89 1.0

1 14 1.660 1000 2,165 0.13 0.90 2.76 4.37 1.81 1

2 x 3 2.2

707AE004840 48.3 68.9 12.61 3.3

3° 46'65.8 75.4 117.6 46.0

2M12 x 89 1.1

1 12 1.900 1000 2,835 0.13 0.79 2.97 4.63 1.81 1

2 x 3 2.5

707AE006050 60.3 68.9 19.71 3.3

3° 1'52.5 89.9 133.4 47.8

2M12 x 89 1.4

2 2.375 1000 4,430 0.13 0.63 3.54 5.25 1.88 12 x 3 3.0

707AE007365 73.0 68.9 28.88 3.3

2° 29'43.3 103.1 146.1 47.8

2M12 x 89 1.6

2 12 2.875 1000 6,492 0.13 0.52 4.06 5.75 1.88 1

2 x 3 3.5

707AE007665 76.1 68.9 31.44 3.3

2° 23'41.7 106.4 146.1 47.8

2M12 x 89 1.8

76,1mm 3.000 1000 7,069 0.13 0.50 4.19 5.75 1.88 – 4.0

707AE008980 88.9 68.9 42.80 3.3

2° 3'35.8 119.1 162.1 47.8

2M12 x 89 1.8

3 3.500 1000 9,621 0.13 0.43 4.69 6.38 1.88 12 x 3 4.0

707AE0114100 114.3 68.9 70.75 6.4

3° 11'55.8 151.1 209.6 52.3

2M16 x 83 3.2

4 4.500 1000 15,904 0.25 0.67 5.95 8.25 2.06 58 x 3 1

4 7.0

707AE0139125 139.7 68.9 105.6 6.4

2° 30'43.3 178.3 254.0 51.8

2M20 x 121 3.8

139,7mm 5.500 1000 23,758 0.25 0.52 7.02 10.00 2.04 34 x 4 3

4 8.3

707AE0141125 141.3 68.9 108.12 6.4

2° 35'45.1 179.8 254.0 52.3

2M20 x 121 4.5

5 5.563 1000 24,306 0.25 0.54 7.08 10.00 2.06 34 x 4 3

4 10.0

707AE0165150 165.1 68.9 147.61 6.4

2° 12'38.4 208.0 285.8 52.3

2M20 x 121 5.4

165,1mm 6.500 1000 33,183 0.25 0.46 8.19 11.25 2.06 – 12.0

707AE0168150 168.3 68.9 153.34 6.4

2° 10'37.8 210.8 285.8 52.3

2M20 x 121 5.0

6 6.625 1000 34,472 0.25 0.45 8.30 11.25 2.06 34 x 4 3

4 11.1

The GRINNELL Figure 707 Heavy Duty Flexible Coupling allows for angular and linear deflection, thermal expansion and contraction, and misalignments of the pipe. Flexible couplings can act as an “expansion joint”, allowing linear and angular movement of the pipes when properly installed. This coupling is capable of pressures up to 68.9 Bar (1,000 psi), depending on pipe size and wall thickness. Suitable for use in a variety of applications, the Figure 707 Coupling provides a dependable method of joining pipe.


Issue 03, 04, 07Cert No. 570, 669, 673


GROOVED COUPLINGS

Grooved

Couplings

27

C

A

B

CB

A

CB

A

25mm - 350mm (1" - 14") 400mm - 450mm (16" - 18") 500mm - 600mm (20" - 24")

Figure 707 Heavy Duty Flexible Couplings(Page 2 of 2)


Part Number

Pipe SizeMax.†

PressureBarpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap mm

Inches

Deflection ‡ Dimensions - mm In. Coupling BoltsApprox.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

DegreesPer

Coupling

mm/mInches/Ft A B C Qty.

Sizemm

Inches

707AE0219200 219.1 55.2 207.91 6.4

1° 40'29.2 271.3 355.6 62.7

2M22 x 165 9.7

8 8.625 800 46,741 0.25 0.35 10.68 14.00 2.47 78 x 6 1

2 21.4

707AE0273250 273.0 55.2 322.99 6.4

1° 20'23.3 331.7 417.6 66.8

2– 13.2

10 10.750 800 72,610 0.25 0.28 13.06 16.44 2.63 1 x 6 12 29.0

707AE0324300 323.9 55.2 454.35 6.4

1° 7'19.2 390.9 478.5 66.8

2– 16.8

12 12.750 800 102,141 0.25 0.23 15.39 18.84 2.63 1 x 6 12 37.0

707AE0355350 355.6 20.7 205.43 6.4

1° 2'18.3 423.4 517.7 74.7

2– 20.9

14 14.000 300 46,181 0.25 0.22 16.67 20.38 2.94 1 x 5 12 46.0

707AE0406400 406.4 20.7 268.31 6.4

0° 54'15.8 478.3 575.1 74.7

3– 26.8

16 16.000 300 60,3189 0.25 0.19 18.83 22.64 2.94 1 x 5 12 59.0

707AE0457450 457.2 20.7 339.58 6.4

0° 48'14.2 541.3 638.0 77.7

3– 35.4

18 18.000 300 76,341 0.25 0.17 21.31 25.12 3.06 1 x 5 12 78.0

707AE0508500 508.0 20.7 419.23 6.4

0° 43'12.5 596.1 708.2 77.7

4– 40.4

20 20.000 300 94,248 0.25 0.15 23.47 27.88 3.06 1 18 x 5 3

4 89.0

707AE0610600 609.6 20.7 603.7 6.4

0° 36'10.8 700.5 812.8 81.0

4– 50.8

24 24.000 300 135,717 0.25 0.13 27.58 32.00 3.19 1 18 x 5 3

4 112.0


for other pipe materials and/or wall thicknesses. Contact a GRINNELL Sales Representative for details. ‡ Max End Gap and Deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.For information on alternative sizes, contact a GRINNELL Sales Representative.For coupling sizes above 300mm (12" ) bolt sizes only available in ANSI. See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Figure 707L Large Diameter CouplingsTech Data Sheet: G133

GRINNELL Figure 707L Large Diameter Coupling is designed for joining large diameter IPS roll grooved pipes. The coupling castings are a two to eight segment design and utilize two bolts at each segment joint to ensure proper connection and seal.

Suitable for use in a variety of applications where there is a need to move large volumes of fluids, the Figure 707L Large Diameter Coupling provides a dependable method of joining pipe.

Pipe Size Max. † Working Pressure

Barpsi

Max. † End Load

kNLbs

Max.* ‡ End Gap mm

inches

Dimensions BoltsApprox.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesNo Size

in

650 660.4 20.7 708 8.6 754.0 842.0 125.64 7

8 x 9- 58

67.026 26.0 300 159,279 0.34 29.68 33.15 4.94 147.0

700 711.2 12.1 479 8.6 813 920 12712 7

8 x 482.0

28 28.0 175 107,757 0.34 32.0 36.3 5.0 180.0

750 762.0 12.1 550 8.6 864 972 12712 7

8 x 495.0

30 30.0 175 123,700 0.34 34.0 38.3 5.0 209.0

800 812.8 12.1 626 8.6 914 1022 12712 7

8 x 494.0

32 32.0 175 140,743 0.34 36.0 40.3 5.0 207.0

900 914.4 12.1 792 8.6 1016 1124 12712 7

8 x 496.0

36 36.0 175 178,128 0.34 40.0 44.3 5.0 212.0

1000 1016.0 12.1 978 8.6 1105 1245 14016 1 x 3 1

2123.0

40 40.0 175 219,911 0.34 43.5 49.0 5.5 271.0

1050 1066.8 12.1 1078 8.6 1156 1295 14016 1 x 3 1

2140.0

42 42.0 175 242,452 0.34 45.5 51.5 5.5 308.0

† Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other pipe materials and/or wall thickness. Contact your GRINNELL Representative for details.

* Maximum available gap between pipe ends. Minimum gap = 0.‡ Max End Gap is for rolled grooved standard weight pipe.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

B

B

B

A

C

C

C

DN700 - DN900 (28" - 36") DN1000 - DN1050 (40" - 42")DN650 (26")

AA


GROOVED COUPLINGS

Grooved

Couplings

29

Shurjoint Figure 7707N Large Diameter Flexible Couplings

Shurjoint Tech Data Sheet: C-23The Shurjoint Model 7707N is a two-segment, flexible coupling for use with standard pipe, roll or cut grooved to AWWA C606 specifications.

The Model 7707N Heavy Duty Flexible Coupling is designed for use in a variety of general piping applications of moderate or high pressure services. The Model 7707N couplings feature flexibility that can deal with misalignment, distortion, thermal stress, vibration and noise and also resist seismic tremors. With the use of Model 7707N couplings you can even design a curved layout. See Typical application – Flexible Couplings on Shurjoint Data Sheet #B-19.

The Model 7707N couplings sizes 350 – 600mm (14” – 24”) are com-prised of two identical ductile iron housing segments, an EPDM rubber gasket and one at each segment joint to ensure a positive connection and seal.

Pressure-Temperature Rating

Pipe Size Max. Working PressureAxial

Displacementmm

Inches

Angular Movement Dimensions BoltsApprox.Weight

Kg.Lbs.

Nominalmm

Inches

ActualO.D.mm

Inches

XS (0.500”)*

Barpsi

STD (0.375”)

Barpsi

LW (0.312”)

Barpsi

Degree Per

Coupling (°)

Per Pipemm / m

in / ft

Amm

Inches

Bmm

Inches

Cmm

InchesNo. Size

in

350 355.6 20 20 17 6.41° – 02’

9.0 412 479 752

15.714 14.000 300 300 250 0.250 0.11 16.23 18.85 2.95 7

8 x 6 12 34.5

400 406.4 20 20 17 6.40° – 54’

8.0 463 547 752

18.416 16.000 300 300 250 0.250 0.10 18.23 21.53 2.95 1 x 6 1

2 40.5

450 457.2 20 20 17 6.40° – 48’

7.0 520 605 792

22.318 18.000 300 300 250 0.250 0.08 20.45 23.81 3.11 1 x 6 1

2 47.1

500 508.0 20 20 17 6.40° – 44’

6.0 571 656 792

24.520 20.000 300 300 250 0.250 0.08 22.48 25.82 3.11 1 x 6 1

2 54.0

550 558.8 20 20 17 6.40° – 39’

6.0 621.4 724.6 792

28.622 22.000 300 300 250 0.250 0.07 24.46 28.52 3.11 1

8 x 6 12 63.0

600 609.6 20 20 17 6.40° – 36’

5.0 674 780 792

29.524 24.000 300 300 250 0.250 0.06 26.55 30.70 3.11 1

8 x 6 12 65.1

Deflection or angular movement is the maximum value that a coupling allows under no internal pressure.* Pressure ratings are based on cut-grooved XS carbon steel pipe.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Nom. Rating

Working Pressure(S40S, Roll-grooved)

Max. ServiceTemperature

Class 150

20.7 Bar @38°C300 psi @100°F

EPDM: 110°CEPDM: 230°F

Nitrile: 82°CNitrile: 180°F

*Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe.

*Proof test pressure: 1.5 times the working pressure, non-shock cold water.

*Burst pressure is engineered minimum 2 times the working pressure.

B C

A

Surface Finish:

for waste water, hydrocarbons, harsh chemicals and sea water services, Drynamels #4900 for exterior (outdoor) architectural applications and others (Option).

For additional details contact Shurjoint.

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


The GRINNELL Figure 909 Plain End Coupling utilizes hardened gripping teeth to securely grip onto plain and beveled end pipe surfaces. It is capable of pressures up to 51.7 Bar (750 psi) depending on pipe size and wall thickness.

The GRINNELL Figure 909 Plain End Coupling is designed for Schedule 40 steel pipe and is not for use with steel pipe with a Brinnell hardness greater than 150 HB, plastic, cast, or ductile iron pipes. Contact a GRINNELL Sales Representative for recommendations on other materials and pipe schedules.

50mm - 150mm (2" - 6") (2 Bolts) 200mm - 400mm (8" - 16") (4 Bolts)

BC

CB

A A

Figure 909 Plain End CouplingsTech Data Sheet: G190

Part Number


Barpsi

Max.†End Load

kNLbs.


Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesQty.

Sizemm

Inches

909AE006050 60.3 51.7 14.78 93.7 146.1 84.1

2M16 x 90 2.4

2 2.375 750 3322.6 3.69 5.75 3.31 58 x 3 1

2 5.4

909AE007365 73.0 41.4 17.33 105.9 158.8 84.1

2M16 x 90 2.7

2 12 2.875 600 3895.1 4.17 6.25 3.31 5

8 x 3 12 5.9

909AE007665 76.1 41.4 23.00 111.9 181.1 98.6

2M20 x 121 2.1

76.1mm 3.000 600 5,170.6 4.41 7.13 3.88 34 x 4 3

4 4.6

909AE008980 88.9 41.4 25.68 122.2 192.0 84.1

2M20 x 121 4.1

3 3.500 600 5772.7 4.81 7.56 3.31 34 x 4 3

4 9.0

909AE0114100 114.3 31 31.83 150.6 219.2 98.6

2M20 x 121 6.1

4 4.500 450 7,156.9 5.93 8.63 3.88 34 x 4 3

4 13.5

909AE0165150 165.1 20.7 44.30 203.7 293.7 293.6

2– 9.8

165.1mm 6.500 300 9,959.0 8.02 11.56 11.56 1 x 6 12 21.6

909AE0168150 168.3 20.7 46.00 208.0 296.7 108.0

2– 10.7

6 6.625 300 10,341.5 8.19 11.68 4.25 1 x 6 12 23.5

909AE0219200 219.1 17.2 64.97 271.5 346.2 124.7

4M22 x 140 15.9

8 8.625 250 14,606.6 10.69 13.63 4.91 78 x 5 1

2 35.1

909AE0273250 273.0 17.2 100.93 333.5 403.4 124.7

4M22 x 140 22.0

10 10.750 250 22,690.6 13.13 15.88 4.91 78 x 5 1

2 48.5

= 1 for red paint finish, 2 for hot dipped galvanised finish† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for plain end coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


GROOVED COUPLINGS

Grooved

Couplings

31

The GRINNELL Figure 780 Grooved Snap Coupling is designed for quickly connecting and disconnecting cut or rolled grooved piping systems. By utilizing a hinged lever mechanism, grooved piping segments are joined quickly and securely without nuts and bolts. Coupling housing segments are locked in place by securing the lever handle with a split pin. Additional Features:

(5" to 8") feature a cross-ribbed housing design for extra strength.

300 psi).

CB

A

Split Pin

Figure 780 Grooved Snap CouplingsTech Data Sheet: G145

Part Number

Pipe Size Max. † *WorkingPressure

Barpsi

Max. *End Load

kNLbs.

Max. End Gap mm

Inches

Dimensions Deflection Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

DegreesPer

Coupling

mm/mInches/Ft

780AE004840 48.3 20.7 3.8 1.6 75.0 118.0 47.0

3° 48'66.4 1.0

1 12 1.900 300 851 0.06 2.95 4.65 1.85 0.80 2.2

780AE006050 60.3 20.7 5.9 1.6 86.0 121.0 48.0

3° 31'61.5 1.1

2 2.375 300 1,329 0.06 3.39 4.76 1.89 0.74 2.4

780AE007365 73.0 20.7 8.7 1.6 92.0 150.0 48.0

2° 30'43.7 1.4

2 12 2.875 300 1,947 0.06 3.62 5.91 1.89 0.52 3.1

780AE007665 76.1 20.7 9.4 1.6 92.0 150.0 48.0

2° 24'41.9 1.4

76,1mm 3.000 300 2,121 0.06 3.62 5.91 1.89 0.50 3.1

780AE008980 88.9 20.7 12.8 1.6 119.0 163.0 48.0

2° 24'41.9 1.8

3 3.500 300 2,886 0.06 4.69 6.42 1.89 0.50 4.0

780AE0114100 114.3 20.7 21.2 3.2 165.0 205.0 52.0

3° 12'55.9 2.7

4 4.500 300 4,771 0.13 6.50 8.07 2.05 0.67 5.9

780AE0139125 139.7 20.7 31.7 3.2 189.0 253.0 52.0

2° 37'45.7 4.9

139,7mm 5.500 300 7,127 0.13 7.44 9.96 2.05 0.55 10.8

780AE0141125 141.3 20.7 32.4 3.2 189.0 253.0 52.0

2° 36'45.4 4.9

5 5.565 300 7,289 0.13 7.44 9.96 2.05 0.54 10.8

780AE0165150 165.1 20.7 44.3 3.2 213.0 278.0 52.0

2° 14'39.0 5.8

165,1mm 6.500 300 9,955 0.13 8.39 10.94 2.05 0.47 12.8

780AE0168150 168.3 20.7 46.0 3.2 216.0 281.0 52.0

2° 10'37.8 5.8

6 6.625 300 10,341 0.13 8.50 11.06 2.05 0.45 12.8

780AE0219200 219.1 20.7 78.0 3.2 278.0 356.0 62.0

1° 40'29.1 9.3

8 8.625 300 17,528 0.13 10.95 14.02 2.44 0.35 20.5

= 1 for black paint finish, 2 for hot dipped galvanised finish† Pressure ratings listed are cold water pressure or maximum working pressure within the service temperature range of the gasket used

in the coupling.* Maximum Working Pressures and End Loads listed are total of internal and external pressures and loads based on Schedule 40 steel pipe

grooved in accordance with Standard Cut Groove or Roll Groove Specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Coatings

(standard)

(optional)

Toggle Links

to ANSI C1010 or C1020

Hinge Pin

conforming to ANSI C1212

Rivet

ANSI C1010

Split Pin

conforming to ASTM A 421

Gasket Specificationsgaskets

have a Green colour stripe code for temperature service from -34°C to 110°C ( -30°F to 230°F).

gaskets have an Orange colour stripe code for temperature service from -29°C to 82°C ( -20°F to 180°F).

Refer to data sheet G610 for more gasket information.

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Shurjoint Figure XH-70EP Extra Heavy Rigid Couplings With End Protection (EP) GasketShurjoint Tech Data Sheet: C-09

Pipe Size Max. WorkingPressure

Barpsi

Max. EndLoadkN

Lbs.

Dimensions Bolt / Nut BoltWeight

Kg.Lbs.

Nominalmm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesNo. Size

in

50 60.3 175 50 90 150 492 5

8 x 2 34

1.52 2.375 2500 11070 3.54 5.90 1.92 3.3

65 73.0 175 73.2 103 168 492 5

8 x 2 34

1.82 1

2 2.875 2500 16220 4.06 6.61 1.92 4.0

80 88.9 175 108.6 122 188 512 5

8 x 2 34

2.23 3.500 2500 24040 4.80 7.40 2.00 4.8

100 114.3 175 179.5 157 222 552 3

4 x 4 34

4.04 4.500 2500 39740 6.18 8.74 2.17 8.8

150 168.3 140 311.3 218 295 572 7

8 x 5 12

8.06 6.625 2000 68910 8.58 11.61 2.25 17.6

200 219.1 140 527.6 275 364 702 1 x 5 1

210.9

8 8.625 2000 116790 10.83 14.33 2.75 24.0

250 273.0 88 514.8 334 424 752 1 x 5 1

214.2

10 10.750 1250 113400 13.15 16.70 2.95 31.2

300 323.9 88 724.7 390 480 752 1 x 5 1

216.7

12 12.750 1250 159510 15.35 18.93 2.95 36.7

* Pressures quoted are based on EP cut grooved XS (Sch. 80) pipe.CAUTION: Always fasten the bolts to the required torque. Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


EP Gasket

The Shurjoint Model XH-70EP is designed for use with plastic coated or cement lined pipe. The EP (end protection) gasket serves to form a continuous lined surface at the joint and also helps protect the pipe ends from corrosion. This coupling is rated up to 175 Bar (2500 psi) when used in conjunction with machined EP cut grooves and the applicable pipe.


Housing:

ASTM A 395 Gr.65-45-15, min. tensile strength 4481 Bar (65,000 psi).

Surface Finish:

Rubber Gasket: “EP” gasket (Colour code: Orange

stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to 82°C (-20°F to 180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F)

Bolts & Nuts:

ASTM A 449-83a (or A 183 Gr. 2), minimum tensile strength 7584 Bar (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to ASTM A 563

BC

A


GROOVED COUPLINGS

Grooved

Couplings

33

Figure 716 Flexible Reducing CouplingsTech Data Sheet: G120

The GRINNELL Figure 716 Flexible Reducing Coupling allows for a direct transition between two different pipe sizes and replaces two couplings and a reducing fitting. It is capable of pressures up to 34.5 Bar (500 psi) depending on pipe size and wall thickness. A flexible reducing coupling is not recommended for low-temperature applications.

B

A

C

Part Number


Barpsi

Max.†End

LoadkN

Lbs.

Max.*‡ End Gap

mmIn.

Deflection ‡ Dimensions mm In.

Coupling Bolts Size

(Qty 2) mmIn.

Approx.Weight

kgLbs.

Nominal DNIn.

O.D.mmIn.

DegreesPer

Coupling

mm/mIn./Ft

A B C

716AE201550 x 40 60.3 x 48.3 34.5 6.31 3.3

1° 53'32.9 88.9 128.5 47.8 M10 x 57 1.3

2 x 1- 12 2.375 x 1.900 500 1418 0.13 0.39 3.50 5.06 1.88 3

8 x 2- 14 2.8

716AE252065 x 50 73.0 x 60.3 34.5 9.85 3.3

1° 33'27.1 101.6 139.7 47.8 M120 x 57 1.5

2- 12 x 2 2.875 x 2.375 500 2215 0.13 0.32 4.00 5.50 1.88 3

8 x 2- 14 3.3

716ME262065 x 50 76.1 x 60.3 34.5 9.85 3.3

1° 34'27.3 106.4 149.4 47.8 M12 x 89 1.5

76.1mm x 2 3.000 x 2.375 500 2215 0.13 0.33 4.19 5.88 1.88 3.3

716AE302080 x 50 88.9 x 60.3 34.5 9.85 3.3

1° 17'22.4 119.1 165.1 47.8 M12 x 89 2.0

3 x 2 3.500 x 2.375 500 2215 0.13 0.27 4.69 6.50 1.88 12 x 3 4.3

716AE302580 x 65 88.9 x 73.0 34.5 14.44 3.3

1° 17'22.4 119.1 165.1 47.8 M12 x 89 1.8

3 x 2- 12 3.500 x 2.875 500 3246 0.13 0.27 4.69 6.50 1.88 1

2 x 3 3.9

716ME302680 x 65 88.9 x 76.1 34.5 15.72 3.3

1° 17'22.4 119.1 165.1 47.8 M12 x 89 1.9

3 x 76.1mm 3.500 x 3.000 500 3534 0.13 0.27 4.69 6.50 1.88 4.2

716AE4220100 x 60 114.3 x 60.3 34.5 9.85 4.8

2° 38'46.0 152.4 206.5 50.8 M16 x 83 2.4

4 x 2 4.500 x 2.375 500 2215 0.19 0.55 6.00 8.13 2.00 58 x 3- 1

4 5.2

716AE4225100 x 65 114.3 x 73.0 34.5 14.44 4.8

2° 38'46.0 152.4 206.5 50.8 M16 x 83 3.0

4 x 2- 12 4.500 x 2.875 500 3246 0.19 0.55 6.00 8.13 2.00 5

8 x 3- 14 6.7

716ME4226100 x 65 114.3 x 76.1 34.5 15.72 4.8

2° 38'46.0 152.4 206.5 50.8 M16 x 83 2.8

4 x 76.1mm 4.500 x 3.000 500 3534 0.19 0.55 6.00 8.13 2.00 6.2

716AE4230100 x 80 114.3 x 88.9 34.5 21.40 4.8

2° 38'46.0 152.4 206.5 50.8 M16 x 83 2.8

4 x 3 4.500 x 3.500 500 4811 0.19 0.55 6.00 8.13 2.00 58 x 3- 1

4 6.2

716ME5242125 x 100 139.7 x 114.3 34.5 35.37 6.4

2° 38'46.0 179.3 241.3 52.3 M20 x 121 4.4

139.7mm x 4 5.500 x 4.500 500 7952 0.25 0.55 7.06 9.50 2.06 9.6

716AE5342125 x 100 141.3 x 114.3 34.5 35.37 6.4

2° 5'36.4 181.1 242.8 52.3 M20 x 121 4.4

5 x 4 5.563 x 4.500 500 7952 0.25 0.44 7.13 9.56 2.06 34 x 4- 3

4 9.6

716ME6242150 x 100 165.1 x 114.3 27.6 28.30 6.4

1° 50'32.0 207.8 274.6 52.3 M20 x 121 5.8

165.1mm x 4 6.500 x 4.500 400 6362 0.25 0.38 8.18 10.81 2.06 12.8

716AE6342150 x 100 168.3 x 114.3 27.6 28.30 6.4

1° 44'30.0 212.9 276.4 52.3 M20 x 121 5.8

6 x 4 6.625 x 4.500 400 6362 0.25 0.36 8.38 10.88 2.06 34 x 4- 3

4 12.8

716AE6353150 x 125 168.3 x 141.3 27.6 43.25 6.4

1° 44'30.0 212.9 276.4 52.3 M20 x 121 6.3

6 x 5 6.625 x 5.563 400 9722 0.25 0.36 8.38 10.88 2.06 34 x 4- 3

4 13.8

716AE8063200 x 150 219.1 x 168.3 27.6 61.33 6.4

1° 15'21.0 271.5 349.3 57.2 M22 x 165 9.1

8 x 6 8.625 x 6.625 400 13789 0.25 0.26 10.69 13.75 2.25 78 x 6- 1

2 20.0

= 1 for red paint finish, 2 for hot dipped galvanised finish* Maximum available gap between pipe ends. Minimum gap = 0.† Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ

on other pipe materials and/or wall thickness. Contact GRINNELL Products for details. ‡ Max end gap and deflection is for cut grooved standard weight pipe. Values for roll grooved pipe will be half that of cut grooved.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Issue 03, 04, 07Cert No. 570, 669, 673

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Figure 702 Mechanical Outlet Couplings(Page 1 of 2)

Tech Data Sheet: G220 The GRINNELL Figure 702 Mechanical Outlet Coupling has the combined features of a coupling and a reducing outlet, eliminating the need for a mechanical tee or other associated couplings. The coupling is available in grooved, male-threaded, or female-threaded outlets. This design makes installation faster, safer, and more cost effective on the job site.

Additional features:(1 1 ⁄ 2" to 6")

(500 psi)(10" HG)

Figure 702 Outlet Coupling with Female BSP Outlet

Figure 702 Outlet Coupling with Male BSP Outlet

Figure 702 Outlet Coupling with Grooved Outlet

CB

A

A

CBCB

T

Run Pipe Size Branch SizeEnd GapRange

mmIn.

Max. Run End

LoadkN

Lbs.

Dimensionsmm In.

Bolt Size In.

Approx. Weight

kgLbs.

Nominal DNIn.

O.D.mmIn.

Female ■Thread

mmIn.

Male ■Thread

mmIn.

Grooved

A B C TNominal mmIn.

O.D.mmIn.

401- 1

2

48.31.900

21.3 – – – 20-22

6.31418

– 114.3 70.0 52.0

38 x 2- 1

8

1.2 1

2 – – – 0.81-0.88 – 4.50 2.75 2.06 2.6

26.9 – – – 20-22 – 114.3 70.0 52.0 1.2 3

4 – – – 0.81-0.88 – 4.50 2.75 2.06 2.6

33.7 – – – 20-22 – 114.3 70.0 49.0 1.31 – – – 0.81-0.88 – 4.50 2.75 1.94 2.9

502

60.32.375

21.3 – – – 20-22

9.92215

– 127.0 70.0 59.0

38 x 2- 1

8

1.4 1

2 – – – 0.81-0.88 – 5.00 2.75 2.32 3.1

26.9 – – – 20-22 – 127.0 70.0 59.0 1.4 3

4 – – – 0.81-0.88 – 5.00 2.75 2.32 3.1

33.7 33.7 25 33.7 20-22 89.0 127.0 70.0 56.0 1.51 1 1 1.315 0.81-0.88 3.50 5.00 2.75 2.20 3.3

652- 1

2 73.0

2.875

21.3 – – – 32-38

14.43246

– 161.0 83.0 56.0

12 x 2- 3

8

2.2 1

2 – – – 1.25-1.50 – 6.33 3.25 2.20 4.8

26.9 – – – 32-38 – 161.0 83.0 65.0 2.1 3

4 – – – 1.25-1.50 – 6.33 3.25 2.56 4.6

33.7 – – – 32-38 – 161.0 83.0 62.0 4.41 – – – 1.25-1.50 – 6.33 3.25 2.44 2.2

42.4 42.4 32 42.4 32-38 94.0 161.0 83.0 – 2.31- 1

4 1- 14 1- 1

4 1.660 1.25-1.50 3.70 6.33 3.25 – 5.1

48.3 48.3 40 48.3 32-38 94.0 161.0 83.0 – 5.91- 1

2 1- 12 1- 1

2 1.900 1.25-1.50 3.70 6.33 3.25 – 2.4


GROOVED COUPLINGS

Grooved

Couplings

35

Figure 702 Outlet Coupling with Female BSP Outlet

Figure 702 Outlet Coupling with Male BSP Outlet

Figure 702 Outlet Coupling with Grooved Outlet

CB

A

A

CBCB

T

Figure 702 Mechanical Outlet Couplings(Page 2 of 2)


Run Pipe Size Branch SizeEnd GapRange

mmIn.

Max. Run End

LoadkN

Lbs.

Dimensionsmm In.

Bolt Size In.

Approx. Weight

kgLbs.

Nominal DNIn.

O.D.mmIn.

Female ■Thread

mmIn.

Male ■Thread

mmIn.

Grooved

A B C TNominal mmIn.

O.D.mmIn.

803

88.93.500

26.9 – – – 32-38

21.44811

– 175.0 83.0 72.0

12 x 3

2.7 3

4 – – – 1.25-1.50 – 6.87 3.25 2.83 5.9

33.7 33.7 25 33.7 32-38 102.0 175.0 83.0 70.0 2.81 1 1 1.315 1.25-1.50 4.00 6.87 3.25 2.75 6.2

42.4 – – – ♦ ♦ ♦ ♦ ♦ ♦1- 1

4 – – – ♦ ♦ ♦ ♦ ♦ ♦48.3 48.3 40 48.3 32-38 102.0 175.0 83.0 – 2.91- 1

2 1- 12 1- 1

2 1.900 1.25-1.50 4.00 6.87 3.25 – 6.4

1004

114.34.500

26.9 – ♦ ♦ 41-46

35.47952

♦ 211.0 93.0 94.0

58 x 3- 1

2

4.2 3

4 – ♦ ♦ 1.63-1.81 ♦ 8.31 3.66 3.70 9.2

33.7 – ♦ ♦ 41-46 ♦ 211.0 93.0 91.0 4.31 – ♦ ♦ 1.63-1.81 ♦ 8.31 3.66 3.58 9.5

48.3 48.3 40 48.3 41-46 124.0 211.0 93.0 84.0 4.31- 1

2 1- 12 1- 1

2 1.900 1.63-1.81 4.88 8.31 3.66 3.31 9.5

60.3 60.3 50 60.3 41-46 124.0 211.0 93.0 – 4.52 2 2 2.375 1.63-1.81 4.88 8.31 3.66 – 9.9

1506

168.36.625

33.7 – 25 33.7 41-46

76.717,235

– 276.0 94.0 121.0

58 x 3- 1

2

6.01 – 1 1.315 1.63-1.81 – 10.86 3.70 4.76 13.2

– – 32 42.4 ♦ ♦ ♦ ♦ ♦ ♦– – 1- 1

4 1.660 ♦ ♦ ♦ ♦ ♦ ♦48.3 48.3 40 48.3 41-46 154.0 276.0 94.0 121.0 6.21- 1

2 1- 12 1- 1

2 1.900 1.63-1.81 6.06 10.86 3.70 4.76 13.6

60.3 60.3 50 60.3 41-46 154.0 276.0 94.0 – 6.52 2 2 2.375 1.63-1.81 6.06 10.86 3.70 – 14.3

■ Threads are BSP. Some size outlets are available with NPT threads. Contact GRINNELL Products for details.

♦ Contact GRINNELL Sales Representative for dimension details.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 19 for coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


Shurjoint Figure 7706-T Transition Couplings Shurjoint Tech Data Sheet: C-07

Model 7706-T Transition Couplings allows for a direct transition from IPS pipe sizes to ISO pipe sizes.

Pipe Size Max. EndLoadkN

Lbs.

Axial Displacement

mmInches

Angular Movement Dimensions - mm InchesBolt / Nut

Sizein

Approx.Weight

Kg.Lbs.

Nominalmm

Inches

O.D.mm

Inches

Per CouplingDegree

Per Pipemm/min/ft.

A B C

65 x 65 73.0 x 76.1 5.90 0 ~ 3.22° -24'

21.0 102 138 48 M10 x 55 1.22 1

2 x 76.1mm 2.875 x 3.000 1330 - ~ 0.13 0.25 4.02 5.43 1.89 38 x 2 1

8 2.6

150 x 150 168.3 x 165.1 44.29 0 ~ 6.41° - 06'

19.0 200 270 53 M16 x 90 3.56 x 165.1mm 6.625 x 6.500 9960 0 ~ 0.25 0.23 7.87 10.63 2.09 5

8 x 3 12 7.7

*Deflection or angular movement is the maximum value that a coupling allows with no internal pressure.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


Pressure-Temperature RatingNom.

RatingWorking Pressure

(S40S, Roll-grooved)Max. ServiceTemperature

Class 150 20.7 Bar @ 38°C300 psi @100°F



*Working pressure is based on roll- or cut-grooved standard wall carbon steel pipe.



MATERIAL SPECIFICATIONSHousing:

ASTM A 395, Gr. 65-45-15, min. tensile strength 4481 Bar (65,000 psi).

Surface Finish:

red.

(Option)

Rubber Gasket: (Colour code: Green stripe)

Good for cold & hot water up to 110°C (230°F). Also good for services for water with acid, water with chlorine, deionized water, seawater and waste water, dilute acids, oil-free air and many chemicals. Not recommended for petroleum oils, minerals oils, solvents and aromatic hydrocarbons. Maximum Temperature Range: -34°C to 110°C (-30°F to 230°F)*. * EPDM gaskets for water services are not recommended for steam services unless couplings or components are accessible for frequent gasket replacement.

(Colour code: Orange stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to 82°C (-20°F to 180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F)

Grade “L” - Silicone.


Bolts & Nuts:

ASTM A 449-83a (or A 183 Gr. 2), minimum tensile strength 7584 Bar (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to ASTM A 563.

B C

A

IPSPIPE

ISOPIPE


GROOVED COUPLINGS

Grooved

Couplings

37

Electrical Continuity

Test pipe at TÜV Rheinland®

Couplings in Galvanised FinishMost GRINNELL Grooved Couplings in galvanised finish comply to the electric conductivity according to clause 11.1.2 of EN 61537-2007. Tests were performed by TÜV Rheinland® and test reports are available upon request.

Part Number

Suitable for size Coupling

Inches

ApproxWeight

kgCLIP0103 1 - 3 0.005

CLIP0406 4 - 6 0.005

CLIP0812 8 - 12 0.005

For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Couplings in Painted FinishEarth bonding of the GRINNELL couplings in painted finish can be made in steel pipework systems with an electrical continuity clip. This clip, manufactured from 301-grade stainless steel, is designed to ensure electrical continuity in situations of high current loading and/or corrosive environments, providing equipotential bonding of the conductive parts. It is recommended that the pipework is assembled and installed as recommended and that

the pipework is bonded to the electrical earth and tested in accordance with the I.E.E. regulations for bonding (earthing). Installation should be regularly checked for equipotential bonding (earthing) in case of accidental damage or unauthorised pipework modifications. Following any future modification, electrical continuity clips must be used and the installation re-tested for equipotential bonding.

DETAIL A

DETAIL A

www.grinnell.com

GROOVED COUPLINGS

Grooved

Couplings


These installation instructions do not take the place of nor do they eliminate the need for the installer to fully read and understand the complete GRINNELL Products Installation Handbook (refer to IH-1000M). Always review the GRINNELL Products Installation Handbook and individual product tech data sheets for the latest instructions, techniques, and care and maintenance information. This document does not supersede or replace the GRINNELL Products Installation Handbook or individual product tech data sheets. Current documentation can be obtained by contacting your GRINNELL sales Representative or visiting www.grinnell.com.

GRINNELL Coupling Installation InformationInstallation Handbook: IH-1000M

WARNINGFailure to follow these instructions may result in improper product installation, joint failure or leakage, serious per-sonal injury, and/or property damage.

The following instructions should be used as a guideline for the proper installation of GRINNELL Grooved Products.

1. Always read and understand the instructions.

2. To avoid serious personal injury always wear appro-priate personal protective equipment (ppe), such as safety glasses, hard hat and foot protection.

3. Never remove any piping component without verifying that the system is de-pressurized and drained. Failure to due so may result in serious personal injury.

4. Ensure that the supplied gasket is suitable for the in-tended application. To prevent deterioration of the gasket material, a petroleum lubricant should never be used. Use a recommended lubricant to install the gasket.

5. The pipe groove dimensions must be in accordance with Standard Roll Groove or Cut Groove Specifica-tions. Refer to Pages 221 to 232 or Tech Data Sheet G710 for additional information.

*Note: The samples that were tested contained the GRINNELL Figure 707 high pressure flexible couplings, and the GRINNELL Figure 260 end caps of the appropriate size. These were used on the assembly to test system components as related in a field environment. The rated or working pressure of these items is 68.9 bar (1,000 psi)

*Note: The material of both the fittings and couplings used in this testing is found on page nine of the GRINNELL Handbook. This material is Ductile Iron Casting Grade 65-45-12, which has an elongation in 51mm (2”) of 12%.

The Component Proof Test in ASME A17.1 – 2004, section 3.19.1.3 requires testing to section 8.2.8.5, or five times the rated pressure.

The calculation of the factor of safety located in section 8.2.8.5 would then be calculated as F = (5.04 / 12 – 2.8) + 2.7. This then, according to section 8.2.8.5, would be a requirement safety factor of 3.25. The minimum pressure requirement of these components then would be 224.1 bar (3,250 psig)

ASME Standard Note

6. Ensure that the coupling keys are engaged in the grooves.

7. Always tighten nuts evenly by alternating sides. Un-even tightening can cause the gasket to pinch or bind. If a gasket becomes pinched, replace it immediately.

8. Torque values are supplied as a guideline and may be used when setting the torque on power impact wrench-es. Always refer to the power impact wrench manufac-turer’s instructions for settings.

9. Exceeding the suggested torque values may cause damage to the coupling and/or result in pipe-joint fail-ure. Minimum bolt torque is required for coupling to meet the published performance parameters.

10. Always inspect each joint to ensure that the coupling is properly installed.

EPDM, Tri-Seal gaskets are recommended for freezer applications. Reducing Couplings are not recommended for freezer applications. For dry pipe and freezer applications, use the Tri-Seal freezer gasket with a petroleum-free silicone lubricant. Standard lube is not recommended for this application as it freezes and can cause leakage.

FLANGE ADAPTERS

39

www.grinnell.com

FLANGE ADAPTERS

Flange

Adapters


MATERIAL SPECIFICATIONS Ductile Iron Housing Specifications

(65,000 psi)

(45,000psi)

(2")

Bolt/Nut Specifications

(110,000 psi)

Coatings

Gasket Specifications

( -30°F to 230°F)(230°F)

( -20°F to 180°F)

General notes: It is the Designer’s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Always read and understand the installation constructions. Never remove any piping components nor correct or modify any piping deficiencies without first depressurizing and draining the system. Material should be verified to be compatible for the specific application.


Issue 03, 04, 07Cert No. 570, 669, 673

Figure 71Flange Adapters

PN10/PN16 BS 4504Page 41


ANSI Class 125/150Page 42

WashersPage 44

Technical DataPage 45

Figure 343 & 344Flange Adapters

(PN10/PN16 BS 4504)Pages 46 - 47


(ANSI Class 150#)Page 48


FLANGE ADAPTERS

Flange

Adapters

41

CA

F B E D

Figure 71 Flange Adapters

(PN10/PN16 BS 4504)Tech Data Sheet: G150

The Figure 71 Flange Adapter is capable of pressures up to 20.7 Bar (300 psi) depending on pipe size and wall thickness. It provides a direct transition from flanged components to a grooved piping system. I.P.S. size flange bolt patterns conform to PN10/PN16The gasket seal is designed with an optimal amount of rubber to provide a dependable seal and to avoid the gasket pocket from overfilling, which may cause assembly difficulties.

Part Number

Pipe Size

Flange Type

Max †End

LoadN

Lbs.

Dimensions - mm In.RecommendedFlange Mating

Bolts ‡ Approx.Wt.kg

LbsNominal

DNIn.

O.D.mmIn.

A B C *D *E F

Size Dia. x Lg

mmIn.

Qty.

71DAE006050 60.3 PN10 /

PN165889 162.1 125.0 19.1 60.5 86.6 184.2 M16 x 76

41.4

2 2.375 1,324 6.38 4.92 0.75 2.38 3.41 7.25 3.0

71DAE007665 76.1 PN10 /

PN168665 184.9 145.0 22.4 76.1 102.4 205.5 M16 x 76

42.3

76.1mm 3.000 1,948 7.28 5.71 0.88 3.00 4.03 8.09 5.0

71DAE008980 88.9 PN10 /

PN1612.838 200.2 160.0 23.9 88.9 115.1 222.5 M16 x 76

82.5

3 3.500 2,886 7.88 6.30 0.94 3.50 4.53 8.76 5.6

71DAE0114100 114.3 PN10 /

PN1621.222 219.9 180.1 23.9 114.3 140.5 239.5 M16 x 76

83.2

4 4.500 4,771 8.66 7.09 0.94 4.50 5.53 9.43 7.0

71DME0139125 139.7 PN10 /

PN1632.436 249.9 210.1 25.4 139.7 165.9 271.5 M16 x 89

84.2

139.7mm 5.500 7,292 9.84 8.27 1.00 5.50 6.53 10.69 9.2

71DAE0165150 165.1 PN10 /

PN1644.282 285.0 240.3 24.5 165.1 194.6 307.3 M20 x 89

84.5

165.1mm 6.500 9,955 11.22 9.46 1.00 6.50 7.66 12.10 10.0

71DAE0168150 168.3 PN10 /

PN1645.999 279.4 241.1 25.4 168.1 197.6 301.8 M20 x 89

87.5

6 6.625 10,341 11.00 9.49 1.00 6.62 7.78 11.88 16.6

71DME82192008

219.18.625

PN1077.968 336.8 292.1 28.6 218.9 254.5 358.6 M20 x 89

89.9

17,528 13.26 11.50 1.125 8.62 9.94 14.12 21.8

71DME0219 PN1677.968 339.8 295.1 28.6 218.9 254.5 362.7 M20 x 89

129.9

17,528 13.38 11.62 1.125 8.62 9.94 14.28 21.8

71DAE827325010

273.010.750

PN10121.121 395.2 350.0 30.2 273.1 312.4 419.1 M20 x 102

1210.2

27,229 15.56 13.78 1.188 10.75 12.31 16.50 22.5

71DAE0273 PN16170.380 406.4 355.1 30.2 273.1 312.7 428.8 M22 x 102

1211.0

38,303 16.00 13.98 1.188 10.75 12.31 16.88 24.2

71DME832430012

323.912.750

PN10170.380 445.0 399.8 31.8 323.9 363.5 470.4 M22 x 102

1212.5

38,303 17.52 15.74 1.25 12.75 14.31 18.52 27.5

71DME0324 PN16170.380 460.2 410.0 31.8 323.9 363.5 486.2 M22 x 102

1212.7

38,303 18.12 16.14 1.25 12.75 14.31 19.14 28.0

= 1 for red paint finish, 2 for hot dipped galvanised finish Maximum Pressure rating is 20,7 Bar (300 psi).* Dimensions D and E represent minimum and maximum sealing surfaces.† Maximum end load is total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe

materials and/or wall thickness. Contact GRINNELL Products for details.‡ Mating Bolts and Nuts are not supplied. Flange Mating Bolts must be at least SAE J429, Grade 5 or stronger. Bolt lengths are standard;

responsibility lies with the purchaser to verify the correct length for the intended application.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 40 for specifications and pages 234 - 245 for gasket information.See pages 44-45 for flange washer Adaptor and page 267 flange drilling specificationsThe effective sealing area of the mating flange must be free from gouges, undulations or deformities of any type to ensure

proper sealing of the gasket. The Fig. 71 Flange provides a rigid joint when used on standard grooved pipe in accordance with GRINNELL specifications, therefore, no linear or angular movement at the joint is allowed.



Issue 03, 04, 07Cert No. 570, 669, 673

www.grinnell.com

FLANGE ADAPTERS

Flange

Adapters


Figure 71 Flange Adapters(ANSI Class 125/150)(Page 1 of 2)


The Figure 71 Flange Adapter is capable of pressures up to 20.7 Bar (300 psi) depending on pipe size and wall thickness. It provides a direct transition from flanged components to a grooved piping system. I.P.S. size flange bolt patterns conform to ANSI Class 125 and 150.

The gasket seal is designed with an optimal amount of rubber to provide a dependable seal and to avoid the gasket pocket from overfilling, which may cause assembly difficulties.

CA

F B E D

Sizes 50mm - 300mm (2" - 12")

Part Number

Pipe SizeMax †

PressureBarpsi

Max End Load †

NLbs.

Dimensions - mm InchesRecommendedFlange Mating

Bolts ‡ Approx. Wt.Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C *D *E F

Size Dia. x Lg

mmInches

Qty.

71AAE006050 60.3 20.7 5889 162.1 120.7 19.1 60.5 86.6 184.2 –

41.4

2 2.375 300 1,324 6.38 4.75 0.75 2.38 3.41 7.25 58 x 3 3.0

71AAE007365 73.0 20.7 8665 178.0 140.0 22.0 73.0 99.0 200.0 –

42.3

2 12 2.875 300 1,948 7.00 5.50 0.88 2.88 3.91 7.88 5

8 x 3 5.0

71AAE008980 88.9 20.7 12.838 190.5 152.4 23.9 88.9 115.1 251.0 –

42.5

3 3.500 300 2,886 7.50 6.00 0.94 3.50 4.53 9.88 58 x 3 5.6

71AAE0114100 114.3 20.7 21.222 228.6 190.5 23.9 114.3 140.5 251.5 –

83.2

4 4.500 300 4,771 9.00 7.50 0.94 4.50 5.53 9.90 58 x 3 7.0

71AAE0141125 141.3 20.7 32.436 254.0 215.9 25.4 141.2 170.7 289.1 –

84.2

5 5.563 300 7,292 10.00 8.50 1.00 5.56 6.72 11.38 34 x 3 1

2 9.2

71AAE0168150 168.3 20.7 45.999 279.4 241.3 25.4 168.1 197.6 301.8 –

84.5

6 6.625 300 10,341 11.00 9.50 1.00 6.62 7.78 11.88 34 x 3 1

2 10.0

71AAE0219200 219.1 20.7 77.968 342.9 298.5 28.7 218.9 252.5 365.3 –

87.5

8 8.625 300 17,528 13.50 11.75 1.13 8.62 9.94 14.38 34 x 3 1

2 16.6

71AAE0273250 273.0 20.7 121.121 406.4 362.0 30.2 273.1 312.7 428.8 –

129.9

10 10.750 300 27,229 16.00 14.25 1.19 10.75 12.31 16.88 78 x 4 21.8

71AAE0324300 323.9 20.7 170.380 482.6 431.8 31.8 323.9 363.5 508.0 –

1211.0

12 12.750 300 38,303 19.00 17.00 1.25 12.75 14.31 20.00 78 x 4 24.2


Issue 03, 04, 07Cert No. 570, 669, 673


FLANGE ADAPTERS

Flange

Adapters

43

Sizes 350mm - 600mm (14" - 24")

F

CA

E D

B

SegmentBolt

Figure 71 Flange Adapters(ANSI Class 125/150)

(Page 2 of 2)


Part Number

Pipe SizeMax †

PressureBarpsi

Max End Load †

NLbs.

Dimensions - mm InchesRecommendedFlange Mating

Bolts ‡ Approx. Wt.Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C *D *E F

Size Dia. x Lg

mmInches

Qty.

71AAE0355350 355.6 20.7 205.423 533.4 476.5 36.5 355.6 381.8 609.6 –

1211.3

14** 14.000 300 46,181 21.00 18.76 1.44 14.00 15.03 24.00 1 x 4 14 25.0

71AAE0406400 406.4 20.7 268.294 596.9 540.0 38.10 406.4 431.7 673.1 –

1614.0

16** 16.000 300 60,315 23.50 21.26 1.50 16.00 17.00 26.50 1 x 4 14 31.0

71AAE0457450 457.2 20.7 340.089 635.0 578.1 41.3 457.2 482.8 736.6 –

1615.8

18** 18.000 300 76,455 25.00 22.76 1.63 18.00 19.01 29.00 1 18 x 4 3

4 35.0

71AAE0508500 508.0 20.7 419.223 698.5 635.0 44.5 508.0 534.2 800.1 –

2020.4

20** 20.000 300 94,245 27.50 25.00 1.75 20.00 21.03 31.50 1 18 x 4 3

4 45.0

71AAE0609600 609.6 17.2 603.713 812.8 749.3 49.0 609.6 636.3 914.4 –

2026.8

24** 24.000 250 135,720 32.00 29.50 1.93 24.00 25.05 36.00 1 14 x 5 1

2 59.0

= 1 for red paint finish, 2 for hot dipped galvanised finish* Dimensions D and E represent minimum and maximum sealing surfaces.** For segment bolt torque recommendations, refer to Installation manual.

† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.

‡ Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger. Bolt lengths are standard; responsibility lies with the purchaser to verify the correct length for the intended application.

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 40 for specifications and pages 234 - 245 for gasket information.See pages 44-45 for flange washer Adaptor and page 267 flange drilling specificationsFor instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Note: The effective sealing area of the mating flange must be free from gouges, undulations or deformities of any type to ensure proper sealing of the gasket. The Fig. 71 Flange provides a rigid joint when used on standard grooved pipe in accordance with GRINNELL specifications, therefore, no linear or angular movement at the joint is allowed

www.grinnell.com

FLANGE ADAPTERS

Flange

Adapters


Flange Adapter Washers

Flange Adapter Washer

GRINNELLFlange Adapter

Grooved Pipe

Mating FlangeComponent

Gasket

Carbon steel Flange Adapter Washers are required when the Figure 71 Flange Adapter is used against surfaces such as:

Contact a GRINNELL Sales Representative for additional information.

Part Number Pipe Size Dimensions

PN10/PN16 ANSINominal

mmInches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

INSDIN060M INS060M50 60.3 100.1 57.2 3.02 2.375 3.94 2.25 0.12

– INS073M65 73.0 119.1 69.9 3.0

2 12 2.875 4.69 2.75 0.12

INSDIN076M –65 76.1 124.2 73.2 3.0

76,1mm 3.000 4.89 2.88 0.12

INSDIN089M INS089M80 88.9 131.8 85.9 3.03 3.500 5.19 3.38 0.12

INSDIN114M INS114M100 114.3 169.9 111.3 3.04 4.500 6.69 4.38 0.12

INSDIN139M –125 139.7 189.2 135.1 3.0

139,7mm 5.500 7.45 5.32 0.12

– INS141M125 141.3 192.0 136.7 3.05 5.563 7.56 5.38 0.12

INSDIN165M –150 165.1 215.1 160.5 3.0

165,1mm 6.500 8.47 6.32 0.12

INSDIN168M INS168M150 168.3 217.4 163.6 3.06 6.625 8.56 6.44 0.12

INSDIN219M INS219M200 219.1 274.6 214.4 3.08 8.625 10.81 8.44 0.12

INSDIN273M INS273M250 273.0 335.0 266.7 3.010 10.750 13.19 10.50 0.12

INSDIN324M INS324M300 323.9 404.9 317.5 3.012 12.750 15.94 12.50 0.12

– INS355M350 355.6 444.5 342.9 3.214 14.000 17.50 13.50 0.13

– INS406M400 406.4 508.0 393.7 3.216 16.000 20.00 15.50 0.13

– INS457M450 457.2 542.9 444.5 3.218 18.000 21.38 17.50 0.13

– INS508M500 508.0 600.1 495.3 3.220 20.000 23.63 19.50 0.13

– INS609M600 609.6 711.2 596.9 3.224 24.000 28.00 23.50 0.13

For information on alternative sizes, contact a GRINNELL Sales Representative.Plate material: stainless steel ASTM A666 Type 304-2BSee Flange Drilling Specifications on page 267.For instructions on part numbers, ordering information, and availability, refer to page 15 or

contact a GRINNELL Sales Representative.

AB

C


FLANGE ADAPTERS

Flange

Adapters

45

Flange Adapter Technical Data

Fig 71 GRINNELL Flange Notes:

A. Fig 71 Flange Adapters have an anti-rotational feature or “Gripping Teeth” cast inside the shoulder.

B. GRINNELL grooved Flanges are to be assembled on butterfly valves so as not to interfere with actuator, or handle operation. The Flange might not fit all Grooved butterfly valve sizes. Contact a GRINNELL Sales Representative for details

C. Figure 71 Flange Adapters are not recommended for application which incorporate tierods for anchoring or on a standard fitting within 90° of each other. Contact a GRINNELL Sales Representative for recommendations prior to using with plastic pipe.

D. Fig 71 GRINNELL Flange sealing gaskets require a hard flat surface for adequate sealing. The use of a metal adaptor insert is required for applications against rubber faced valves or other equipment. The adaptor insert is installed between the GRINNELL Flange sealing gasket and the mating flange or surface to provide an effective sealing surface area.

Metal Flange Washer Adapters are required when Figure 71 Flange Adapter is used against surfaces such as:

1. Rubber Surfaces (see exhibit A)

2. Adapting AWWA Cast Flanges

3. Rubber Faced Wafer Valves

4. Serrated Flange Surfaces (see exhibit B)

Special attention required during installation to ensure that the gasket is installed correctly with the small side on the inside.

See the picture on the left side.

FlangeAdapterWasher

GRINNELLFig. 71

GroovedPipe


RubberSurface

GRINNELLFig. 71


GroovedPipe Flange

AdapterWasher

Full FaceGasket

Exhibit A

Exhibit B

www.grinnell.com

FLANGE ADAPTERS

Flange

Adapters


Figure 343 & 344 Flange Adapters(PN10/PN16 BS 4504)(Page 1 of 2)

Part Number

Pipe SizeFlange Drilling

E to Emm

Inches

Mating Flange Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Bolt Qty.

Bolt Sizemm

343F0006050 60.3 PN10 &

PN1695.0

4 M16 x 652.3

2 2.375 3.74 5.07

343F0007665 76.1 PN10 &

PN1695.0

4 M16 x 653.3

76.1mm 3.000 3.74 7.27

343F0008980 88.9 PN10 &

PN16100.0

4 M16 x 704.0

3 3.500 3.94 8.82

343F00108100 108.0 PN10 &

PN16102.0

8 M16 x 704.5

108.0mm 4.252 4.02 9.92

343F00114100 114.3 PN10 &

PN16102.0

8 M16 x 704.6

4 4.500 4.02 10.14

343F00133125 133.0 PN10 &

PN16105.0

8 M16 x 755.9

133.0mm 5.236 4.13 13.00

343F00139125 139.7 PN10 &

PN16105.0

8 M16 x 756.0

139,7mm 5.500 4.13 13.23

343F00159125 159.0 PN10 &

PN16105.0

8 M16 x 757.1

159.0mm 6.260 4.13 15.65

343F00165150 165.1 PN10 &

PN16105.0

8 M20 x 807.2

165,1mm 6.500 4.13 15.87

343F00168150 168.3 PN10 &

PN16105.0

8 M20 x 807.2

6 6.625 4.13 15.87

344F002192008**

219.18.625

PN10112.0

8 M20 x 8010.2

4.41 22.49

343F00219 PN16112.0

12 M20 x 9010.2

4.41 22.49

344F0027325010**

273.010.750

PN10138.0

12M20 x 90

18.05.43 39.68

343F00273 PN16138.0

M24 x 10018.0

5.43 39.68

344F0032430012**

323.912.750

PN10138.0

12M20 x 90

22.45.43 49.38

343F00324 PN16138.0

M24 x 10022.4

5.43 49.38

E to E


FLANGE ADAPTERS

Flange

Adapters

47

Figure 343 & 344 Flange Adapters(PN10/PN16 BS 4504)

(Page 1 of 2)

Part Number

Pipe SizeFlange Drilling

E to Emm

Inches

Mating Flange Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Bolt Qty.

Bolt Sizemm

344T0035535014

355.614.000

PN10203.2

16M20 x 100

55.38.00 121.91

343T00355 PN16203.2

M24 x 11555.3

8.00 121.91

344T0040640016

406.416.000

PN10203.2

16M24 x 110

61.78.00 136.03

343T00406 PN16203.2

M27 x 12561.7

8.00 136.03

344T0045745018

457.218.000

PN10203.2

20M24 x 115

76.28.00 167.99

343T00457 PN16203.2

M27 x 14076.2

8.00 167.99

344T0050850020

508.020.000

PN10203.2

20M24 x 115

94.38.00 207.90

343T00508 PN16203.2

M30 x 16094.3

8.00 207.90

344T0061060024

609.624.000

PN10203.2

20M24 x 115

124.38.00 274.03

343T00610 PN16203.2

M33 x 180124.3

8.00 274.03

= 1 for red paint finish, 2 for hot dipped galvanised finish♦ Contact GRINNELL Sales Representative for dimension details.For information on alternative sizes, contact a GRINNELL Sales Representative.See Flange Drilling Specifications on page 267.See specifications on page 40.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

E to E

www.grinnell.com

FLANGE ADAPTERS

Flange

Adapters


Figure 341 Flange Adapters(ANSI Class 150#)Tech Data Sheet: G180

Part Number

Pipe SizeE to Emm

Inches

Mating Flange Bolts Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

BoltQty.

Bolt Size

Inches

341F0006050 60.3 101.6

4 58 x 2 3

42.8

2 2.375 4.00 6.4

341F0007365 73.0 101.6

4 58 x 2 3

44.0

2 12 2.875 4.00 8.8

341F0008980 88.9 101.6

4 58 x 2 3

44.7

3 3.500 4.00 10.4

341F00114100 114.3 152.4

8 58 x 2 3

48.3

4 4.500 6.00 18.2

341F00141125 141.3 152.4

8 34 x 2 7

810.0

5 5.563 6.00 22.0

341F00168150 168.3 152.4

8 34 x 3 1

812.7

6 6.625 6.00 28.1

341F00219200 219.1 152.4

8 34 x 3 1

419.8

8 8.625 6.00 43.7

341F00273250 273.0 203.2

12 78 x 3 1

230.9

10 10.750 8.00 68.2

341F00324300 323.9 203.2

12 78 x 3 3

443.6

12 12.750 8.00 96.1

341T00355350 355.6 203.2

12 1 x 4 12

55.814 14.000 8.00 123.0

341T00406400 406.4 203.2

16 1 x 4 34

68.516 16.000 8.00 151.0

341T00457450 457.2 203.2

16 1 18 x 5

74.818 18.000 8.00 165.0

341T00508500 508.0 203.2

20 1 18 x 5 1

293.0

20 20.000 8.00 205.0

341T00610600 609.6 203.2

20 1 14 x 6

120.224 24.000 8.00 265.0

= 1 for red paint finish, 2 for hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See Flange Drilling Specifications on page 267.See specifications on page 40.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

E to E

GROOVED FITTINGS

49

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Grooved Fittings Table of Contents


Figure 21090° Elbows

Page 52

Figures 210LR & 310LR

90° Long Radius Elbows

Page 53

Figure 201, 301 & 201LR45° Elbows

Page 54

Figures 212 & 312

22 1⁄2° ElbowsPage 55

Figures 211 & 311

11 1⁄4° ElbowsPage 56

Figures 3D, 5D & 6D

11 1⁄4° to 90° Long Radius Elbows

Pages 57 - 59

Figure 219 & 319Tees

Page 60

Figure 227Cross

Page 61

Figures 260 & 360

End CapsPage 62

Figures 361, 362, 363, 364

& 365End Caps with BSP Threaded Outlets

Pages 63 - 64

Figures 221 & 321

Reducing TeesPages 65 - 68

Figure 322Reducing Tees

Page 69

Figure 222Hydrant Tee

Page 69

Figures 250 & 350

Concentric Reducers

Pages 70 - 72

Figures 251 & 351

Eccentric ReducersPages 73 - 75

Figure 31445° Laterals

Page 76

Figure 32545° Reducing

Laterals

Page 77

Figure 330Tee Wyes

Pages 78 - 79

Figure 331Reducing Tee Wyes

Page 80

Figures 391, 392, & 393BSP Threaded,

Groved and Plain Adapter Nipples

Page 81

Figure 304Groove x Male

BSP Thread Nipple MachinedPage 82

Figure 305Groove x Female

BSP Thread Nipple MachinedPage 82


GROOVED FITTINGS

Grooved

Fittings

51

GRINNELL Grooved Fittings in ductile iron and fabricated steel provide an economical and efficient method of changing direction, adding an outlet, and reducing or capping piping systems.

GRINNELL Grooved Fittings are rated at the pressure rating of the coupling in use.


Ductile Iron Fitting Specifications

ductile iron castings, Grade 65-45-12

(65,000 psi)

(45,000 psi)

(2"), minimum 12%

galvanizing

Fabricated Steel Fitting Specifications

(60,000 psi)

(35,000 psi)

(1 1⁄4" – 10") Schedule 40

(12" – 24") STD (.375)

Coatings

Threads

Fitting Friction Resistance Chart

Fittings SpecificationsTech Data Sheet: G180

Pipe Size Elbows90°m

Feet

Elbows45°m

Feet

TeeBranch

mFeet

TeeRunm

Feet

Nominal mm

Inches

O.D.mm

Inches25 33.7 0.5 0.2 1.3 0.51 1.315 1.6 0.7 4.3 1.6

32 42.4 0.6 0.3 1.5 0.61 1

4 1.660 1.9 1.0 4.8 1.9

40 48.3 0.7 0.4 1.8 0.71 1

2 1.900 2.3 1.2 5.8 2.3

50 60.3 1.0 0.5 2.5 1.02 2.375 3.2 1.6 8.0 3.2

65 73.0 1.2 0.6 3.0 1.22 1

2 2.875 3.9 2.0 9.8 3.9

65 76.1 1.2 0.6 3.1 1.276,1mm 3.000 4.1 2.1 10.3 4.1

80 88.9 1.5 0.7 3.7 1.53 3.500 4.9 2.4 12.2 4.9

100 108.0 2.0 1.0 5.0 2.0108.0mm 4.252 6.5 3.3 16.3 6.5

100 114.3 2.0 1.0 5.0 2.04 4.500 6.5 3.3 16.3 6.5

125 133.0 2.4 1.3 6.1 2.4133.0mm 5.236 8.0 4.1 20.0 8.0

125 139.7 2.4 1.3 6.1 2.4139,7mm 5.500 8.0 4.1 20.0 8.0

125 141.3 2.5 1.3 6.3 2.55 5.563 8.2 4.1 20.5 8.2

125 159.0 2.9 1.4 7.2 2.9159.0mm 6.260 9.5 4.8 23.8 9.5

150 165.1 2.9 1.4 7.2 2.9165,1mm 6.500 9.5 4.8 23.8 9.5

150 168.3 3.0 1.5 7.6 3.06 6.625 9.9 5.0 24.8 9.9

200 219.1 4.0 2.0 10.0 4.08 8.625 13.1 6.6 32.8 13.1

250 273.0 5.0 2.5 12.6 5.010 10.750 16.5 8.3 41.3 16.5

300 323.9 6.1 3.0 15.1 6.112 12.750 19.9 9.9 49.7 19.9

350 355.6 7.0 5.5 20.7 7.014 14.000 23.0 18.0 67.9 23.0

400 406.4 7.9 6.1 23.8 7.916 16.000 25.9 20.0 78.1 25.9

450 457.2 8.8 7.0 25.9 8.818 18.000 28.9 23.0 85.0 28.9

500 508.0 10.1 7.9 30.5 10.120 20.000 33.1 25.9 100.1 33.1

600 609.6 12.2 9.1 35.1 12.224 24.000 40.0 29.9 115.2 40.0

For reducing tee branches, use value corresponding to the branch size. For example, for a 200 x 200 x 50mm (8" x 8" x 2") tee,

use a branch value of 50mm (2") is 2,5m (8.0'). For sizes not listed, interpolate from the values shown. Expressed as Equivalent Straight Pipe.



www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


C to E

Figure 210 90° ElbowsTech Data Sheet: G180

Part Number

Pipe SizeC to Emm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

210M0003425 33.7 57.0 0.41 1.315 2.24 0.9

210M0004232 42.4 69.9 0.5

1 14 1.660 2.75 1.0

210M0004840 48.3 69.9 0.6

1 12 1.900 2.75 1.3

210M0006050 60.3 82.6 0.82 2.375 3.25 1.8

210M0007365 73.0 95.3 1.4

2 12 2.875 3.75 3.1

210M0007665 76.1 95.3 1.5

76,1mm 3.000 3.75 3.2

210M0008980 88.9 108.0 2.23 3.500 4.25 4.8

210M00108100 108.0 121.0 3.9

108,0mm 4.252 4.76 86

210M00114100 114.3 127.0 3.44 4.500 5.00 7.5

210M00133125 133.0 133.0 5.1

133.0mm 5.236 5.24 11.3

210M00139125 139.7 139.7 5.1

139,7mm 5.500 5.50 11.3

210M00141125 141.3 139.7 5.35 5.563 5.50 11.6

210M00159150 159.0 152.0 6.6

159,0mm 6.260 5.98 14.6

210M00165150 165.1 165.1 7.7

165,1mm 6.500 6.50 16.9

210M00168150 168.3 165.1 7.56 6.625 6.50 16.6

210M00219200 219.1 196.9 13.48 8.625 7.75 29.6

210M00273250 273.0 228.6 22.010 10.750 9.00 48.5

210M00324300 323.9 254.0 30.112 12.750 10.00 66.4

= 1 for red paint finish, 2 for hot dipped galvanised finish .For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to

page 15 or contact a GRINNELL Sales Representative.


GROOVED FITTINGS

Grooved

Fittings

53

C to E

Figure 310LR 90° Fabricated Elbow

(Shown)

Figures 210LR & 310LR 90° Long Radius Elbows


Pipe Size Figure 210LR - Cast Figure 310LR - Fabricated

Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

50 60.3210LR0060

111.3 1.1–

– –2 2.375 4.38 2.4 – –

65 73.0210LR0073

127.0 2.3–

– –2 1

2 2.875 5.00 5.1 – –

65 76.1210LR0076

127.0 2.0–

– –76,1mm 3.000 5.00 4.4 – –

80 88.9210LR0089

149.4 3.0–

– –3 3.500 5.88 6.6 – –

100 114.3210LR0114

190.5 5.3–

– –4 4.500 7.50 11.6 – –

125 139.7210LR0139

241.3 8.6–

– –139,7mm 5.500 9.50 19.0 – –

125 141.3210LR0141

241.3 9.1–

– –5 5.563 9.50 20.0 – –

150 165.1210LR0165

273.1 12.0–

– –165,1mm 6.500 10.75 26.4 – –

150 168.3210LR0168

273.1 13.4–

– –6 6.625 10.75 29.5 – –

200 219.1210LR0219

362.0 28.2–

– –8 8.625 14.25 62.1 – –

250 273.0210LR0273

438.0 27.2–

– –10 10.750 17.24 60.0 – –

300 323.9210LR0324

521.0 30.4–

– –12 12.750 20.51 67.0 – –

350 355.6210LR0355

533.4 59.4–

– –14 14.000 21.00 131.0 – –

400 406.4210LR0406

609.6 81.6–

– –16 16.000 24.00 180.0 – –

450 457.2–

– –310T00457

685.8 118.818 18.000 – – 27.00 262.0

500 508.0–

– –310T00508

838.2 147.020 20.000 – – 33.00 324.0

600 609.6–

– –310T00610

914.4 211.424 24.000 – – 36.00 466.0

= 1 for red paint finish, 2 for hot dipped galvanised finish .For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


C to E

C to E

C

Figure 201, 301 & 201LR 45° ElbowsTech Data Sheet: G180

Figure 201 45° Cast Elbow

Figure 301 45° Fabricated Elbow

(Full Flow)

Figure 201LR 45° Cast Elbow (Long Radius)

Pipe Size Figure 201 - Cast Figure 301 - Fabricated Figure 201LR - Long Radius, Cast

Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

25 33.7201M00034

45.0 0.3– –

1 1.315 1.77 0.732 42.4

201M0004244.5 0.4

– –1 1

4 1.660 1.75 0.840 48.3

201M0004844.5 0.4

– –1 1

2 1.900 1.75 0.950 60.3

201M0006050.8 0.6

– –2 2.375 2.00 1.365 73.0

201M0007357.2 1.0

– –2 1

2 2.875 2.25 2.165 76.1

201M0007657.2 1.0

– –76,1mm 3.000 2.25 2.2

80 88.9201M00089

63.5 1.6– –

3 3.500 2.50 3.5100 108.0

201M0010873.0 2.5

– –108,0mm 4.252 2.87 5.5

100 114.3201M00114

76.2 2.5– –

4 4.500 3.00 5.5125 133.0

201M0013382.6 3.5

– –133.0mm 5.236 3.25 7.7

125 139.7201M00139

82.6 3.5– –

139,7mm 5.500 3.25 7.7125 141.3

201M0014182.6 3.7

– –5 5.563 3.25 8.1

150 159.0201M00159

88.9 5.4– –

159,0mm 6.260 3.50 11.9150 165.1

201M0016588.9 5.4

– –165,1mm 6.500 3.50 11.9

150 168.3201M00168

88.9 5.4– –

6 6.625 3.50 11.9200 219.1

201M00219108.0 8.6

– –8 8.625 4.25 19.0

250 273.0201M00273

120.7 12.7– –

10 10.750 4.75 28.0300 323.9

201M00324133.4 22.0

– –12 12.750 5.25 48.0

350 355.6– – 201LR00355

379.0 40.114 14.000 14.92 88.4

400 406.4– – 201LR00406

434.0 47.916 16.000 17.09 105.6

450 457.2– 301T00457

348.0 66.2–

18 18.000 13.70 145.9500 508.0

– 301T00508380.0 81.2

–20 20.000 14.96 179.0600 609.6

– 301T00610444.0 115.7

–24 24.000 17.48 255.1

= 1 for red paint finish, 2 for hot dipped galvanised finish and 5 (201 only) for white paint finishNote: Fabricated Full Flow 1.5D. C to E Dimensions differ from DIN 2605/01 to allow for insulation. For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

C to E


GROOVED FITTINGS

Grooved

Fittings

55

Figure 312 22 1⁄2° Fabricated Elbow

Figure 212 22 1⁄2° Cast Elbow

C to E C to E

Figures 212 & 312 22 1⁄2° Elbows


Pipe Size Figure 212 - Cast Figure 312 - Fabricated

Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

32 42.4212A00042

44.5 0.4–

– –1 1

4 1.660 1.75 0.8 – –

40 48.3212A00048

44.5 0.5–

– –1 1

2 1.900 1.75 1.0 – –

50 60.3212A00060

47.8 0.6–

– –2 2.375 1.88 1.3 – –

65 73.0212A00073

50.8 0.9–

– –2 1

2 2.875 2.00 1.9 – –

65 76.1212M00076

50.8 0.9–

– –76,1mm 3.000 2.00 2.0 – –

80 88.9212A00089

57.2 1.3–

– –3 3.500 2.25 2.9 – –

100 114.3212A00114

66.8 2.1–

– –4 4.500 2.63 4.7 – –

125 139.7212M00139

73.2 3.1–

– –139,7mm 5.500 2.88 6.9 – –

125 141.3212A00141

73.2 3.1–

– –5 5.563 2.88 6.9 – –

150 165.1–

– –312F00165

79.5 4.3165,1mm 6.500 – – 3.13 9.4

150 168.3212A00168

79.5 4.3–

– –6 6.625 3.13 9.4 – –

200 219.1212A00219

98.6 7.7–

– –8 8.625 3.88 16.9 – –

250 273.0–

– –312F00273

111.3 6.410 10.750 – – 4.38 14.0

300 323.9–

– –312F00324

124.0 10.012 12.750 – – 4.88 22.0

350 355.6–

– –312T00355

127.0 20.914 14.000 – – 5.00 46.0

400 406.4–

– –312T00406

127.0 23.716 16.000 – – 5.00 52.2

450 457.2–

– –312T00457

139.7 29.518 18.000 – – 5.50 65.0

500 508.0–

– –312T00508

152.4 36.320 20.000 – – 6.00 80.0

600 609.6–

– –312T00610

177.8 50.824 24.000 – – 7.00 112.0

= 1 for red paint finish, 2 for hot dipped galvanised finish For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Figure 311 11 1⁄4° Fabricated Elbow

Figure 211 11 1⁄4° Cast Elbow

C to E C to E

Figures 211 & 311 11 1⁄4° ElbowsTech Data Sheet: G180


Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx.Weight

Kg.Lbs.

32 42.4211A00042

35.1 0.3–

– –1 1

4 1.660 1.38 0.7 – –

40 48.3211A00048

35.1 0.4–

– –1 1

2 1.900 1.38 0.8 – –

50 60.3211A00060

35.1 0.5–

– –2 2.375 1.38 1.1 – –

65 73.0211A00073

38.1 0.7–

– –2 1

2 2.875 1.50 1.6 – –

65 76.1211M00076

38.1 0.7–

– –76,1mm 3.000 1.50 1.7 – –

80 88.9211A00089

38.1 1.0–

– –3 3.500 1.50 2.2 – –

100 114.3211A00114

44.5 1.5–

– –4 4.500 1.75 3.4 – –

125 139.7211M00139

50.8 2.3–

– –139,7mm 5.500 2.00 5.1 – –

125 141.3211A00141

50.8 2.4–

– –5 5.563 2.00 5.2 – –

150 165.1211M00165

50.8 2.9–

– –165,1mm 6.500 2.00 6.4 – –

150 168.3211A00168

50.8 2.9–

– – 6.625 2.00 6.5 – –

200 219.1211A00219

50.8 4.2–

– –8 8.625 2.00 9.2 – –

250 273.0–

– –311F00273

54.1 4.110 10.750 – – 2.13 9.1

300 323.9–

– –311F00324

57.2 7.612 12.750 – – 2.25 16.7

350 355.6–

– –311F00355

88.9 14.614 14.000 – – 3.50 32.1

400 406.4–

– –311F00406

101.6 19.116 16.000 – – 4.00 42.0

450 457.2–

– –311F00457

114.3 24.218 18.000 – – 4.50 53.2

500 508.0–

– –311F00508

127.0 29.820 20.000 – – 5.00 65.7

600 609.6–

– –311F00610

152.4 43.524 24.000 – – 6.00 96.0

= 1 for red paint finish, 2 for hot dipped galvanised finish For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


GROOVED FITTINGS

Grooved

Fittings

57

Figure 301-3D(45°)

C to E

R = 3D

Figure 303-3D(30°)

C to E

R = 3D

Figure 306-3D(60°)

C to E

R = 3D

Figure 310-3D(90°)

C to E

R = 3D

C to E

R = 3D

Figure 312-3D(22.5°)

Figure 311-3D(11.25°)

R = 3D

C to E

Long Radius 3D Elbows

Pipe Size 310-3D90° Elbow

306-3D60° Elbow

301-3D45° Elbow

303-3D30° Elbow

312-3D22 1⁄ 2° Elbow

311-3D11 1⁄4° Elbow

Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

50 60.3 254 2.4 191 2.1 165 1.9 146 1.7 133 1.6 114 1.32 2.375 10 5.3 7 1

2 4.7 6 12 4.2 5 3

4 3.8 5 14 3.5 4 1

2 2.9

65 73.0 292 4.3 210 3.7 184 3.4 152 2.9 140 2.6 121 2.22 1

2 2.875 11 12 9.5 8 1

4 8.2 7 14 7.6 6 6.4 5 1

2 5.8 4 34 4.9

80 88.9 330 6.7 235 5.7 197 5.1 165 4.4 146 3.9 127 3.33 3.500 13 14.7 9 1

4 12.6 7 34 11.2 6 1

2 9.7 5 34 8.5 5 7.3

90 101.6 368 8.4 254 6.5 216 5.6 171 4.6 152 4.2 127 3.43 1

2 4.000 14 12 18.6 10 14.4 8 1

2 12.3 6 34 10.2 6 9.2 5 7.6

100 114.3 406 10.9 279 9.3 229 8.1 184 6.7 165 6.1 133 4.84 4.500 16 24.1 11 20.4 9 17.8 7 1

4 14.8 6 12 13.4 5 1

4 10.5

125 141.3 508 18.6 349 15.7 286 13.7 229 11.3 203 10.1 165 85 5.563 20 40.9 13 3

4 34.5 11 14 30.1 9 24.9 8 22.2 6 1

2 17.6

150 168.3 610 28.9 419 24.4 343 21.3 273 17.5 241 15.5 197 12.36 6.625 24 63.7 16 1

2 53.7 13 12 46.9 10 3

4 38.6 9 12 34.2 7 3

4 27.1

200 219.1 813 58.1 559 49.0 457 42.8 368 35.7 324 31.4 267 25.38 8.625 32 128.0 22 108.0 18 94.3 14 1

2 78.7 12 34 69.3 10 1

2 55.7

250 273.1 1016 102.8 692 85.9 572 75.7 457 62.7 406 55.9 330 44.110 10.750 40 226.5 27 1

4 189.4 22 12 166.9 18 138.2 16 123.2 13 97.3

300 323.9 1219 151 832 126.5 686 111.3 552 92.9 489 82.4 394 64.312 12.750 48 332.9 32 3

4 278.8 27 245.3 21 34 204.7 19 1

4 181.6 15 12 141.8

350 355.6 1422 194 972 162.6 800 142.9 641 118.6 572 106 464 83.614 14.000 56 427.6 38 1

4 358.5 31 12 315.0 25 1

4 261.4 22 12 233.7 18 1

4 184.4

400 406.4 1626 254.1 1111 213.2 914 187.2 737 151.7 648 137.5 527 108.816 16.000 64 560.3 43 3

4 470.1 36 412.8 29 334.5 25 12 303.2 20 3

4 239.9

450 457.2 1829 322.4 1251 270.7 1029 237.5 826 197.4 730 175 593 138.118 18.000 72 710.7 49 1

4 596.9 40 12 523.7 32 1

2 435.1 28 34 385.7 23.35 304.5

500 508.0 2032 398.8 1391 335.1 1143 293.8 914 243.3 813 216.9 660 171.320 20.000 80 879.3 54 3

4 738.7 45 647.8 36 536.4 32 478.1 26 377.7

600 609.6 2438 576.2 1664 482.4 1365 422.3 1099 351.9 972 311.8 787 245.324 24.000 96 1270.3 65 1

2 1,063.6 53 34 931.0 43 1

4 775.7 38 14 687.2 31 540.9

Long radius Elbows 3D, 5D, and 6D, in sizes up to and including 100mm (4"), are provided with 100mm (4") long integral tangent. Remaining sizes provided with integral tangents with lengths equal to nominal pipe size.

Grooved or plain-end available; specify choice on order.Material is standard wall steel pipe to ASTM A 53, Grade B. (Other materials available on request).Elbow bends to conform to above radii.C to E tolerances: 50 - 150mm (2" - 6") ± 3,2 mm ( 1⁄8"); 200 - 400mm (8" - 16") ± 6,4 mm ( 1⁄4"); 450 - 600mm (18" - 24") ± 9,5mm ( 3⁄8").All weights are approximate, based on calculated weight of pipe.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Figure 301-5D(45°)

C to E

R = 5D

Figure 303-5D(30°)

C to E

R = 5D

Figure 306-5D(60°)

C to E

R = 5D

Figure 310-5D(90°)

C to E

R = 5D

C to E

R = 5D

Figure 312-5D(22.5°)

Figure 311-5D(11.25°)

R = 5D

C to E



306-5D60° Elbow

301-5D45° Elbow

303-5D30° Elbow

312-5D22 1⁄ 2° Elbow

311-5D11 1⁄4° Elbow

Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

50 60.3 356 3.3 248 2.8 210 2.5 171 2.1 152 1.9 127 1.52 2.375 14 7.2 9 3

4 6.1 8 14 5.5 6 3

4 4.6 6 4.1 5 3.3

65 73.0 419 6 286 5.1 235 4.4 191 3.8 165 3.3 133 2.52 1

2 2.875 16 12 13.3 11 1

4 11.2 9 14 9.8 7 1

2 8.3 6 12 7.2 5 1

4 5.6

80 88.9 483 9.5 324 7.9 260 6.8 203 5.6 178 4.9 140 3.83 3.500 19 21.0 12 3

4 17.5 10 14 15.1 8 12.3 7 10.8 5 1

2 8.3

90 101.6 546 12.2 311 9.1 286 7.5 222 5.9 191 5.1 146 3.93 1

2 4.000 21 12 26.9 12 1

4 20.0 11 14 16.5 8 3

4 13.0 7 12 11.3 5 3

4 8.7

100 114.3 610 16.1 394 13.1 318 11.5 241 9.1 203 7.8 152 5.74 4.500 24 35.4 15 1

2 28.9 12 12 25.4 9 1

2 20.1 8 17.1 6 12.5

125 141.3 762 27.2 495 22.3 394 19.2 298 15.3 254 13.1 191 9.65 5.563 30 60 19 1

2 49.2 15 12 42.3 11 3

4 33.7 10 28.9 7 12 21.2

150 168.3 914 42.4 591 34.5 470 29.7 356 23.9 305 20.4 229 14.96 6.625 36 93.5 23 1

4 76.1 18 12 65.5 14 52.7 12 45.0 9 32.9

200 219.1 1219 85.2 787 69.4 622 59.3 476 47.7 406 41.1 305 308 8.625 48 187.9 31 152.9 24 1

2 130.8 18 34 105.2 16 90.5 12 66.2

250 273.1 1524 150.9 991 123.6 781 105.5 597 84.7 508 72.7 381 53.210 10.750 60 332.6 39 272.5 30 3

4 232.5 23 12 186.8 20 160.3 15 117.2

300 323.9 1829 221.7 1187 181.4 940 155.4 711 123.5 610 106.8 457 78.112 12.750 72 488.8 46 3

4 400.0 37 342.7 28 272.3 24 235.5 18 172.2

350 355.6 2134 284.7 1384 232.8 1092 198.8 832 159.1 711 137.2 533 100.314 14.000 84 627.7 54 1

2 513.3 43 438.3 32 34 350.7 28 302.5 21 221.2

400 406.4 2438 373.1 1581 304.9 1251 261.1 953 208.9 813 179.8 610 131.516 16.000 96 822.5 62 1

4 672.2 49 14 575.6 37 1

2 460.6 32 396.4 24 289.8

450 457.2 2743 473.3 1778 386.7 1403 330.3 1073 265.5 914 229.9 686 166.818 18.000 108 1,043.5 70 852.5 55 1

4 728.2 42 14 585.3 36 506.9 27 367.8

500 508.0 3048 585.5 1975 478.2 1562 409.4 1187 326.9 1016 282.2 762 206.320 20.000 120 1,290.9 77 3

4 1,054.2 61 12 902.5 46 3

4 720.7 40 622.1 30 454.9

600 609.6 3658 845.7 2369 690.3 1873 590.8 1429 473.6 1219 407.6 908 295.424 24.000 144 1,864.4 93 1

4 1,521.8 73 34 1,302.5 56 1

4 1,044.0 48 898.5 35 34 651.2




GROOVED FITTINGS

Grooved

Fittings

59

Figure 301-6D(45°)

C to E

R = 6D

Figure 303-6D(30°)

C to E

R = 6D

Figure 306-6D(60°)

C to E

R = 6D

Figure 310-6D(90°)

C to E

R = 6D

C to E

R = 6D

Figure 312-6D(22.5°)

Figure 311-6D(11.25°)

R = 6D

C to E



306-6D60° Elbow

301-6D45° Elbow

303-6D30° Elbow

312-6D22 1⁄ 2° Elbow

311-6D11 1⁄4° Elbow

Nominal mm

Inches

O.D.mm

Inches

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

C to Emm

Inches

ApproxWeight

Kg.Lbs.

50 60.3 406 3.7 279 3.1 229 2.7 184 2.3 165 2 133 1.62 2.375 16 8.2 11 6.9 9 6.0 7 1

4 5.0 6 12 4.5 5 1

4 3.6

65 73.0 483 5.9 324 5.8 260 5 203 4 178 3.5 140 2.72 1

2 2.875 19 13.0 12 34 12.7 10 1

4 11.0 8 8.9 7 7.8 5 12 6.0

80 88.9 559 10.9 368 9.0 292 7.8 222 6.2 191 5.3 146 3.93 3.500 22 24.1 14 1

2 19.9 11 12 17.1 8 3

4 13.6 7 12 11.7 5 3

4 8.7

90 101.6 635 14.1 413 10.3 324 8.4 248 6.5 210 5.6 152 4.23 1

2 4.000 25 31.1 16 14 22.8 12 3

4 18.6 9 34 14.4 8 1

4 12.3 6 9.2

100 114.3 711 18.6 457 15.2 356 12.9 267 10.2 222 8.6 165 6.34 4.500 28 41.1 18 33.6 14 28.4 10 1

2 22.5 8 34 18.9 6 1

2 13.8

125 141.3 889 31.6 565 25.5 445 21.8 330 17.1 279 14.7 203 10.45 5.563 35 69.6 22 1

4 56.2 17 12 48.1 13 37.7 11 32.3 8 22.9

150 168.3 1067 49.2 679 39.8 533 33.9 400 26.9 337 22.9 241 166 6.625 42 108.4 26 3

4 87.7 21 74.8 15 34 59.3 13 1

4 50.5 9 12 35.3

200 219.1 1422 98.8 908 80.1 711 68.2 533 54.1 445 45.5 324 32.48 8.625 56 217.8 35 3

4 176.7 28 150.4 21 119.2 17 12 100.4 12 3

4 71.5

250 273.1 1778 174.9 1137 142 889 120.8 660 94.8 559 81.1 406 57.710 10.750 70 385.6 44 3

4 313.1 35 266.3 26 208.9 22 178.8 16 127.1

300 323.9 2134 257.1 1359 208 1060 176.4 794 139.5 667 118.4 483 83.612 12.750 84 566.7 53 1

2 458.5 41 34 388.9 31 1

4 307.5 26 14 261.1 19 184.4

350 355.6 2489 330.1 1588 267.4 1238 226.8 927 179.4 781 152.8 565 10814 14.000 98 727.8 62 1

2 589.6 48 34 499.9 36 1

2 395.4 30 34 336.9 22 1

4 238.0

400 406.4 2845 432.5 1816 350.8 1416 297.3 1060 235.2 895 200.9 648 141.916 16.000 112 953.6 71 1

2 773.3 55 34 655.5 41 3

4 518.6 35 14 443.0 25 1

2 312.9

450 457.2 3200 548.8 2045 445.4 1594 377.7 1194 298.7 1003 253.8 730 180.818 18.000 126 1,209.9 80 1

2 981.9 62 34 832.7 47 658.5 39 1

2 559.5 28 34 398.7

500 508.0 3556 678.8 2267 549.8 1772 467.1 1327 369.7 1118 314.8 806 221.720 20.000 140 1,496.6 89 1

4 1,212.0 69 34 1,029.8 52 1

4 815.0 44 694.1 31 34 488.7

600 609.6 4267 980.5 2724 795.1 2127 675 1588 532.1 1329 450.2 972 321.724 24.000 168 2,161.6 107 1

4 1,752.9 83 34 1,488.2 62 1

2 1,173.0 52.34 992.5 38 14 709.3



www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Figure 219 Cast Tee

Figure 319 Fabricated Tee

C to E

C to E

C to E

C to E

Figures 219 & 319 TeesTech Data Sheet: G180


Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

ApproxWeight

Kg.Lbs.

Part Number

C to Emm

Inches

ApproxWeight

Kg.Lbs.

25 33.7219M00034

57.0 0.5–

1 1.315 2.24 1.1

32 42.4219M00042

69.9 0.8–

– –1 1

4 1.660 2.75 1.7 – –

40 48.3219M00048

69.9 1.0–

– –1 1

2 1.900 2.75 2.1 – –

50 60.3219M00060

82.6 1.3–

– –2 2.375 3.25 2.8 – –

65 73.0219M00073

95.3 2.0–

– –2 1

2 2.875 3.75 4.4 – –

65 76.1219M00076

95.3 2.9–

– –76,1mm 3.000 3.75 6.5 – –

80 88.9219M00089

108.0 2.9–

– –3 3.500 4.25 6.5 – –

100 108.0219M00108

121.0 5.2–

108,0mm 4.252 4.76 11.5

100 114.3219M00114

127.0 4.8–

– –4 4.500 5.00 10.6 – –

125 133.0219M00133

133.0 4.8–

133.0mm 5.236 5.24 1.6

125 139.7219M00139

139.7 6.9–

– –139,7mm 5.500 5.50 15.2 – –

125 141.3219M00141

139.7 7.0–

– –5 5.563 5.50 15.5 – –

150 159.0219M00159

152.0 6.3–

159,0mm 6.260 5.98 13.9

150 165.1219M00165

165.1 11.0–

– –165,1mm 6.500 6.50 24.2 – –

150 168.3219M00168

165.1 10.4–

– –6 6.625 6.50 23.0 – –

200 219.1219M00219

196.9 19.8–

– –8 8.625 7.75 43.7 – –

250 273.0219M00273

228.6 25.9–

– –10 10.750 9.00 57.0 – –

300 323.9219M00324

254.0 49.9–

– –12 12.750 10.00 110.0 – –

350 355.6219M00355

279.0 61.2–

– –14 14.000 11.00 135.0 – –

400 406.4219M00406

305.0 61.7–

– –16 16.000 12.00 136.0 – –

450 457.2–

– –319T00457

394.0 98.918 18.000 – – 15.50 218.0

500 508.0–

– –319T00508

438.0 125.020 20.000 – – 17.25 275.0

600 609.6–

– –319T00610

508.0 172.024 24.000 – – 20.00 379.0

= 1 for red paint finish, 2 for hot dipped galvanised finish For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or



GROOVED FITTINGS

Grooved

Fittings

61

Figure 227 CrossTech Data Sheet: G180

C to E

C to EPart Number

Pipe SizeC to Emm

Inches

ApproxWeight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

227M0004232 42.4 69.9 1.0

1 14 1.660 2.75 2.2

227M0004840 48.3 69.9 1.1

1 12 1.900 2.75 2.5

227M0006050 60.3 82.6 1.72 2.375 3.25 3.7

227M0007365 73.0 95.3 2.6

2 12 2.875 3.75 5.8

227M0007665 76.1 95.3 2.7

76,1mm 3.000 3.75 6.0

227M0008980 88.9 108.0 3.93 3.500 4.25 8.6

227M00108100 108.0 121.0 5.3

108.0mm 4.252 4.76 11.7

227M00114100 114.3 127.0 9.44 4.500 5.00 20.7

222M0139125 139.7 139.7 6.8

139,7mm 5.500 5.50 15.0

327F00141125 141.3 139.7 8.05 5.563 5.50 17.6

327F00165150 165.1 165.1 12.4

165,1mm 6.500 6.50 27.3

227M00168150 168.3 165.1 13.06 6.625 6.50 28.6

227M00219200 219.1 196.9 21.78 8.625 7.75 48.0

227M002732250 273.0 228.6 34.010 10.750 9.00 75.0

227M003242300 323.9 254.0 43.412 12.750 10.00 95.8

= 1 for red paint finish, 2 for hot dipped galvanised finish For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or


www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Figure 360 Cap Fabricated

Figure 260 Cap Cast

E to EE to E

Figures 260 & 360 End CapsTech Data Sheet: G180


Nominal mm

Inches

O.D.mm

Inches

Part Number

E to Emm

Inches

ApproxWeight

Kg.Lbs.

Part Number

E to Emm

Inches

ApproxWeight

Kg.Lbs.

25 33.7260M00034

21.1 0.1–

– –1 1.315 0.83 0.2 – –

32 42.4260M00042

21.1 0.1–

– –1 1

4 1.660 0.83 0.3 – –

40 48.3260M00048

21.1 0.2–

– –1 1

2 1.900 0.83 0.4 – –

50 60.3260M00060

23.4 0.3–

– –2 2.375 0.92 0.7 – –

65 73.0260M00073

23.4 0.5–

– –2 1

2 2.875 0.92 1.0 – –

65 76.1260M00076

21.8 0.6–

– –76,1mm 3.000 0.86 1.3 – –

80 88.9260M00089

23.4 0.6–

– –3 3.500 0.92 1.4 – –

100 114.3260M00114

25.4 1.2–

– –4 4.500 1.00 2.6 – –

125 139.7260M00139

23.4 2.1–

– –139,7mm 5.500 0.92 4.7 – –

125 141.3260M00141

25.4 2.3–

– –5 5.563 1.00 5.0 – –

125 159.0260M00159

25.0 3.8–

159,0mm 6.260 0.98 8.4

150 165.1260M00165

23.4 2.9–

– –165,1mm 6.500 0.92 6.4 – –

150 168.3260M00168

25.4 2.8–

– –6 6.625 1.00 6.2 – –

200 219.1260M00219

27.0 3.2–

– –8 8.625 1.06 7.1 – –

250 273.0260M00273

25.8 11.1–

– –10 10.750 1.02 24.5 – –

300 323.9260M00324

25.8 14.1–

– –12 12.750 1.02 31.0 – –

350 355.6–

– –360T00355

215.9 16.614 14.000 – – 8.50 36.5

400 406.4–

– –360T00406

228.6 19.716 16.000 – – 9.00 43.5

450 457.2–

– –360T00457

254.0 25.618 18.000 – – 10.00 57.0

500 508.0–

– –360T00508

279.4 34.320 20.000 – – 11.00 75.7

600 609.6–

– –360T00610

317.5 45.824 24.000 – – 12.50 101.0

= 1 for red paint (RAL 3000) finish, 2 for hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


GROOVED FITTINGS

Grooved

Fittings

63

Figures 361, 362, 363, 364 & 365 End Caps with ISO R7 Threaded Outlets

(Page 1 of 2)

Pipe SizeE to EmmIn.

Fig. 364 – DN25 1" Fig. 365 – DN32 1 1⁄4”

NominalmmIn.

O.D.mmIn.

Part Number

CmmIn.

Outletsize

ISO R7In.

Approx. Weight

Kg.Lbs.

Part Number

CmmIn.

Outletsize

ISO R7In.

Approx. Weight

Kg.Lbs.

50 60.3 25364M00060

- DN25 0.2365M00060

- DN32 0.22 2.375 0.98 - 1 0.4 - 1 1

4 0.4

65 76.1 25364M00076

9 DN25 0.4365M00076

9 DN32 0.476.1mm 3.000 0.98 0.35 1 0.9 0.35 1 1

4 0.9

80 88.9 25364M00089

15 DN25 0.5365M00089

15 DN32 0.53 3.500 0.98 0.59 1 1.1 0.59 1 1

4 1.1

100 114.3 25364M00114

28 DN25 1.3365M00114

28 DN32 1.34 4.500 0.98 1.10 1 2.9 1.10 1 1

4 2.9

125 139.7 25364M00139

40 DN25 1.8365M00139

40 DN32 1.8139.7mm 5.500 0.98 1.57 1 4.0 1.57 1 1

4 4.0

125 141.3 25364M00141

41 DN25 1.8–

- - -5 5.563 0.98 1.61 1 4.0 - - -

150 165.1 25364M00165

53 DN25 2.7365M00165

53 DN32 2.7165.1mm 6.500 0.98 2.09 1 6.0 2.09 1 1 4 6.0

150 168.3 25364M00168

54 DN25 2.7365M00168

54 DN32 2.76 6.625 0.98 2.13 1 6.0 2.13 1 1

4 6.0

200 219.1 31364M00219

79 DN25 5.0365M00219

79 DN32 5.0

8 8.625 1.22 3.11 1 11.0 3.11 1 14 11.0



Fig. 363 – DN20 3⁄4"

NominalmmIn.

O.D.mmIn.

Part Number

CmmIn.

Outletsize

ISO R7In.

Approx. Weight

Kg.Lbs.

50 60.3 25363M00060

- DN20 0.22 2.375 0.98 - 3

4 0.4

65 76.1 25363M00076

9 DN20 0.476.1mm 3.000 0.98 0.35 3

4 0.9

80 88.9 25363M00089

15 DN20 0.53 3.500 0.98 0.59 3

4 1.1

100 114.3 25363M00114

28 DN20 1.34 4.500 0.98 1.10 3

4 2.9

125 139.7 25363M00139

40 DN20 1.8139.7mm 5.500 0.98 1.57 3

4 4.0

125 141.3 25363M00141

41 DN20 1.85 5.563 0.98 1.61 3

4 4.0

150 165.1 25363M00165

53 DN20 2.7165.1mm 6.500 0.98 2.09 3

4 6.0

150 168.3 25363M00168

54 DN20 2.76 6.625 0.98 2.13 3

4 6.0

200 219.1 31363M00219

79 DN20 5.0

8 8.625 1.22 3.11 34 11.0

= 1 for red paint (RAL 3000) finish, 2 for hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page

15 or contact a GRINNELL Sales Representative.

C

E to E

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings



Fig. 361 – DN40 1 1⁄2” Fig. 362 – DN50 2”

NominalmmIn.

O.D.mmIn.

Part Number

CmmIn.

Outletsize

ISO R7In.

Approx. Weight

Kg.Lbs.

Part Number

CmmIn.

Outletsize

ISO R7In.

Approx. Weight

Kg.Lbs.

50 60.3 25361M00060

- DN40 0.2–

- - -2 2.375 0.98 - 1 1

2 0.4 - - -

65 76.1 25361M00076

9 DN40 0.4362M00076

4 DN50 0.376.1mm 3.000 0.98 0.35 1 1

2 0.9 0.16 2 0.7

80 88.9 25361M00089

15 DN40 0.5362M00089

9 DN50 1.33 3.500 0.98 0.59 1 1

2 1.1 0.35 2 2.9

100 114.3 25361M00114

28 DN40 1.3362M00114

22 DN50 1.34 4.500 0.98 1.10 1 1

2 2.9 0.87 2 2.9

125 139.7 25361M00139

40 DN40 1.8362M00139

34 DN50 1.8139.7mm 5.500 0.98 1.57 1 1

2 4.0 1.34 2 4.0

125 141.3 25361M00141

41 DN40 1.8362M00141

34 DN50 1.85 5.563 0.98 1.61 1 1

2 4.0 1.34 2 4.0

150 165.1 25361M00165

53 DN40 2.7362M00165

47 DN50 2.7165.1mm 6.500 0.98 2.09 1 1

2 6.0 1.85 2 6.0

150 168.3 25361M00168

54 DN40 2.7362M00168

48 DN50 2.76 6.625 0.98 2.13 1 1

2 6.0 1.89 2 6.0

200 219.1 31361M00219

79 DN40 5.0362M00219

73 DN50 5.0

8 8.625 1.22 3.11 1 12 11.0 2.87 2 11.0

250 273.0 31361M00273

90 DN40 7.2362M00273

90 DN50 7.210 10.750 1.22 3.54 1 1 2 15.9 3.54 2 15.9


Figures 361, 362, 363, 364 & 365 End Caps with ISO R7 Threaded Outlets(Page 2 of 2)

C

E to E


GROOVED FITTINGS

Grooved

Fittings

65

C to E

C to E

C to E

C to E

Figure 221 Reducing Tee CastFigure 321 Reducing Tee Fabricated

Figures 221 & 321 Reducing Tees(Page 1 of 4)



Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

50 x 50 x 25 60.3 x 60.3 x 33.7–

– –321F02010

88.6 0.742 x 2 x 1 2.375 x 2.375 x 1.315 – – 3.25 1.6

50 x 50 x 40 60.3 x 60.3 x 48.3221M02015

82.6 1.2–

– –2 x 2 x 1 1

2 2.375 x 2.375 x 1.900 3.25 2.7 – –65 x 65 x 50 73.0 x 73.0 x 60.3

221M0252095.3 1.9

–– –

2 12 x 2 1

2 x 2 2.875 x 2.875 x 2.375 3.75 4.2 – –65 x 65 x 40 76.1 x 76.1 x 48.3

221M0261595.3 2.0

–– –

76,1mm x 76,1mm x 1 12 3.000 x 3.000 x 1.900 3.75 4.5 – –

65 x 65 x 50 76.1 x 76.1 x 60.3221M02620

95.3 2.0–

– –76,1mm x 76,1mm x 2 3.000 x 3.000 x 2.375 3.75 4.3 – –

80 x 80 x 25 88.9 x 88.9 x 33.7221M03010

108.0 2.5–

– –3 x 3 x 1 3.500 x 3.500 x 1.315 4.25 5.6 – –

80 x 80 x 40 88.9 x 88.9 x 48.3221A03015

108.0 2.7–

– –3 x 3 x 1 1

2 3.500 x 3.500 x 1.900 4.25 5.9 – –80 x 80 x 50 88.9 x 88.9 x 60.3

221M03020108.0 2.7

–– –

3 x 3 x 2 3.500 x 3.500 x 2.375 4.25 6.0 – –80 x 80 x 65 88.9 x 88.9 x 73.0

221M03025108.0 2.8

–– –

3 x 3 x 2 12 3.500 x 3.500 x 2.875 4.25 6.2 – –

80 x 80 x 65 88.9 x 88.9 x 76.1221M03026

108.0 2.7–

– –3 x 3 x 76,1mm 3.500 x 3.500 x 3.000 4.25 6.0 – –100 x 100 x 50 114.3 x 114.3 x 60.3

221M04220127.0 4.1

–– –

4 x 4 x 2 4.500 x 4.500 x 2.375 5.00 9.1 – –100 x 100 x 65 114.3 x 114.3 x 73.0

221M04225127.0 4.3

–– –

4 x 4 x 2 12 4.500 x 4.500 x 2.875 5.00 9.5 – –

100 x 100 x 65 114.3 x 114.3 x 76.1221M04226

127.0 4.3–

– –4 x 4 x 76,1mm 4.500 x 4.500 x 3.000 5.00 9.5 – –100 x 100 x 80 114.3 x 114.3 x 88.9

221M04230127.0 4.4

–– –

4 x 4 x 3 4.500 x 4.500 x 3.500 5.00 9.7 – –125 x 125 x 80 139.7 x 139.7 x 76.1

–– –

321F05226139.7 6.6

139,7 x 139,7 x 76,1mm 5.500 x 5.500 x 3.000 – – 5.50 14.5125 x 125 x 80 139.7 x 139.7 x 88.9

221M05230139.7 5.8

–– –

139,7 x 139,7mm x 3 5.500 x 5.500 x 3.500 5.50 12.7 – –

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings



Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

125 x 125 x 100 139.7 x 139.7 x 114.3221M05242

139.7 6.1–

– –139,7 x 139,7mm x 4 5.500 x 5.500 x 4.500 5.50 13.4 – –

125 x 125 x 65 141.3 x 141.3 x 73.0221A05325

139.7 8.2–

– –5 x 5 x 2 1

2 5.563 x 5.563 x 2.875 5.50 18.0 – –125 x 125 x 80 141.3 x 141.3 x 88.9

221A05330139.7 6.4

–– –

5 x 5 x 3 5.563 x 5.563 x 3.500 5.50 14.0 – –125 x 125 x 100 141.3 x 141.3 x 114.3

221A05342139.7 6.3

–– –

5 x 5 x 4 5.563 x 5.563 x 4.500 5.50 13.9 – –150 x 150 x 50 165.1 x 165.1 x 60.3

–– –

321F06220165.1 11.9

165,1 x 165,1mm x 2 6.500 x 6.500 x 2.375 – – 6.50 26.2150 x 150 x 65 165.1 x 165.1 x 76.1

–– –

321F06226165.1 12.1

165,1 x 165,1 x 76,1mm 6.500 x 6.500 x 3.000 – – 6.50 26.7150 x 150 x 80 165.1 x 165.1 x 88.9

221M06230165.1 8.2 – –

165,1 x 165,mm x 3 6.500 x 6.500 x 3.500 6.50 18.0 – –150 x 150 x 100 165.1 x 165.1 x 114.3

221M06242165.1 8.9

–– –

165,1 x 165,mm x 4 6.500 x 6.500 x 4.500 6.50 19.5 – –150 x 150 x 50 168.3 x 168.3 x 60.3

221M06320165.1 8.8

–– –

6 x 6 x 2 6.625 x 6.625 x 2.375 6.50 19.4 – –150 x 150 x 65 168.3 x 168.3 x 73.0

221M06325165.1 9.8

–– –

6 x 6 x 2 12 6.625 x 6.625 x 2.875 6.50 21.2 – –

150 x 150 x 65 168.3 x 168.3 x 76.1221M06326

165.1 9.8–

– –6 x 6 x 76,1mm 6.625 x 6.625 x 3.000 6.50 21.2 – –150 x 150 x 80 168.3 x 168.3 x 88.9

221M06330165.1 9.5

–– –

6 x 6 x 3 6.625 x 6.625 x 3.500 6.50 21.0 – –150 x 150 x 100 168.3 x 168.3 x 114.3

221M06342165.1 9.9

–– –

6 x 6 x 4 6.625 x 6.625 x 4.500 6.50 21.8 – –150 x 150 x 125 168.3 x 168.3 x 139.7

221M06352165.1 10.4

–– –

6 x 6 x 139,7mm 6.625 x 6.625 x 5.500 6.50 23.0 – –200 x 200 x 100 219.1 x 219.1 x 114.1

221A08042196.9 16.9

–– –

8 x 8 x 4 8.625 x 8.625 x 4.500 7.75 37.2 – –200 x 200 x 125 219.1 x 219.1 x 139.7

221M08052196.9 17.1

–– –

8 x 8 x 139,7mm 8.625 x 8.625 x 5.500 7.75 37.7 – –200 x 200 x 150 219.1 x 219.1 x 165.1

221M08062196.9 17.1

–– –

8 x 8 x 165,1mm 8.625 x 8.625 x 6.500 7.75 37.7 – –200 x 200 x 150 219.1 x 219.1 x 168.3

221A08063196.9 17.0

–– –

8 x 8 x 6 8.625 x 8.625 x 6.625 7.75 37.4 – –250 x 250 x 100 273.0 x 273.0 x 114.3

221M01142228.6 29.9

–– –

10 x 10 x 4 10.750 x 10.750 x 4.500 9.00 65.9 – –250 x 250 x 125 273.0 x 273.0 x 139.7

–– –

321F01152228.6 26.2

10 x 10 x 139,7mm 10.750 x 10.750 x 5.500 – – 9.00 57.8250 x 250 x 150 273.0 x 273.0 x 165.1

–– –

321F01162228.6 26.2

10 x 10 x 165,1mm 10.750 x 10.750 x 6.500 – – 9.00 57.8250 x 250 x 150 273.0 x 273.0 x 168.3

221M01163228.6 30.8

–228.6 27.2

10 x 10 x 6 10.750 x 10.750 x 6.625 9.00 67.9 9.00 66.0



Figure 221 Reducing Tee Cast

Figure 321 Reducing Tee Fabricated

C to E

C to E

C to E

C to E


GROOVED FITTINGS

Grooved

Fittings

67


Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

250 x 250 x 200 273.0 x 273.0 x 219.1221M01180

228.6 31.8–

228.6 28.110 x 10 x 8 10.750 x 10.750 x 8.625 9.00 70.1 9.00 62.0

300 x 300 x 80 323.9 x 323.9 x 88.9–

– –321F01330

254.0 40.012 x 12 x 3 12.750 x 12.750 x 3.500 – – 10.00 88.2

300 x 300 x 100 323.9 x 323.9 x 114.3–

– –321F01342

254.0 40.012 x 12 x 4 12.750 x 12.750 x 4.500 – – 10.00 88.2

300 x 300 x 125 323.9 x 323.9 x 139.7–

– –321F01352

254.0 40.012 x 12 x 139,7mm 12.750 x 12.750 x 5.500 – – 10.00 88.2

300 x 300 x 150 323.9 x 323.9 x 165.1–

– –321F01362

254.0 36.712 x 12 x 165,1mm 12.750 x 12.750 x 6.500 – – 10.00 80.9

300 x 300 x 150 323.9 x 323.9 x 168.3–

– –321F01363

254.0 36.712 x 12 x 6 12.750 x 12.750 x 6.625 – – 10.00 80.9

300 x 300 x 200 323.9 x 323.9 x 219.1–

– –321F01380

254.0 34.612 x 12 x 8 12.750 x 12.750 x 8.625 – – 10.00 76.3

300 x 300 x 250 323.9 x 323.9 x 273.0–

– –321F01311

254.0 35.212 x 12 x 10 12.750 x 12.750 x 10.750 – – 10.00 77.6

350 x 350 x 100 355.6 x 355.6 x 114.3–

– –321T01442

279.4 46.914 x 14 x 4 14.000 x 14.000 x 4.500 – – 11.00 103.3

350 x 350 x 150 355.6 x 355.6 x 168.3–

– –321T01463

279.4 46.914 x 14 x 6 14.000 x 14.000 x 6.625 – – 11.00 103.3

350 x 350 x 200 355.6 x 355.6 x 219.1–

– –321T01480

279.4 46.914 x 14 x 8 14.000 x 14.000 x 8.625 – – 11.00 103.4

350 x 350 x 250 355.6 x 355.6 x 273.0–

– –321T01411

279.4 47.314 x 14 x 10 14.000 x 14.000 x 10.750 – – 11.00 104.3

350 x 350 x 300 355.6 x 355.6 x 323.9–

– –321T01413

279.4 47.814 x 14 x 12 14.000 x 14.000 x 12.750 – – 11.00 105.3

400 x 400 x 100 406.4 x 406.4 x 114.3–

– –321T01642

304.8 59.216 x 16 x 4 16.000 x 16.000 x 4.500 – – 12.00 130.5

400 x 400 x 150 406.4 x 406.4 x 168.3–

– –321T01663

304.8 59.216 x 16 x 6 16.000 x 16.000 x 6.625 – – 12.00 130.5

400 x 400 x 200 406.4 x 406.4 x 219.1–

– –321T01680

304.8 59.216 x 16 x 8 16.000 x 16.000 x 8.625 – – 12.00 130.5

400 x 400 x 250 406.4 x 406.4 x 273.0–

– –321T01611

304.8 58.616 x 16 x 10 16.000 x 16.000 x 10.750 – – 12.00 129.3

400 x 400 x 300 406.4 x 406.4 x 323.9–

– –321T01613

304.8 59.116 x 16 x 12 16.000 x 16.000 x 12.750 – – 12.00 130.2

400 x 400 x 350 406.4 x 406.4 x 355.6–

– –321T01614

304.8 63.716 x 16 x 14 16.000 x 16.000 x 14.000 – – 12.00 140.4

450 x 450 x 150 457.2 x 457.2 x 168.3–

– –321T01863

393.7 87.418 x 18 x 6 18.000 x 18.000 x 6.625 – – 15.50 192.7

450 x 450 x 200 457.2 x 457.2 x 219.1–

– –321T01880

393.7 87.418 x 18 x 8 18.000 x 18.000 x 8.625 – – 15.50 192.7

450 x 450 x 250 457.2 x 457.2 x 273.0–

– –321T01811

393.7 87.818 x 18 x 10 18.000 x 18.000 x 10.750 – – 15.50 193.6





C to E

C to E

C to E

C to E

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings





Nominal mm

Inches

O.D.mm

Inches

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

Part Number

C to Emm

Inches

Approx. Weight

Kg.Lbs.

450 x 450 x 300 457.2 x 457.2 x 323.9–

– –321T01813

393.7 89.018 x 18 x 12 18.000 x 18.000 x 12.750 – – 15.50 196.3

450 x 450 x 350 457.2 x 457.2 x 355.6–

– –321T01814

393.7 91.318 x 18 x 14 18.000 x 18.000 x 14.000 – – 15.50 201.3

450 x 450 x 400 457.2 x 457.2 x 406.4–

– –321T01816

393.7 92.218 x 18 x 16 18.000 x 18.000 x 16.000 – – 15.50 203.2

500 x 500 x 150 508.0 x 508.0 x 168.3–

– –321T02163

450.9 120.020 x 20 x 6 20.000 x 20.000 x 6.625 – – 17.25 264.6

500 x 500 x 200 508.0 x 508.0 x 219.1–

– –321T02180

450.9 120.020 x 20 x 8 20.000 x 20.000 x 8.625 – – 17.25 264.6

500 x 500 x 250 508.0 x 508.0 x 273.0–

– –321T02111

450.9 120.020 x 20 x 10 20.000 x 20.000 x 10.750 – – 17.25 264.6

500 x 500 x 300 508.0 x 508.0 x 323.9–

– –321T02113

450.9 120.020 x 20 x 12 20.000 x 20.000 x 12.750 – – 17.25 264.6

500 x 500 x 350 508.0 x 508.0 x 355.6–

– –321T02114

450.9 120.020 x 20 x 14 20.000 x 20.000 x 14.000 – – 17.25 264.6

500 x 500 x 400 508.0 x 508.0 x 406.4–

– –321T02116

450.9 120.020 x 20 x 16 20.000 x 20.000 x 16.000 – – 17.25 264.6

500 x 500 x 450 508.0 x 508.0 x 457.2–

– –321T02118

450.9 120.020 x 20 x 18 20.000 x 20.000 x 18.000 – – 17.25 264.6

600 x 600 x 200 609.6 x 609.6 x 219.1–

– –321T02480

508.0 162.024 x 24 x 8 24.000 x 24.000 x 8.625 – – 20.00 357.1

600 x 600 x 250 609.6 x 609.6 x 273.0–

– –321T02411

508.0 162.024 x 24 x 10 24.000 x 24.000 x 10.750 – – 20.00 357.1

600 x 600 x 300 609.6 x 609.6 x 323.9–

– –321T02413

508.0 162.024 x 24 x 12 24.000 x 24.000 x 12.750 – – 20.00 357.1

600 x 600 x 350 609.6 x 609.6 x 355.6–

– –321T02414

508.0 162.024 x 24 x 14 24.000 x 24.000 x 14.000 – – 20.00 357.1

600 x 600 x 400 609.6 x 609.6 x 406.4–

– –321T02416

508.0 162.024 x 24 x 16 24.000 x 24.000 x 16.000 – – 20.00 357.1

600 x 600 x 450 609.6 x 609.6 x 457.2–

– –321T02418

508.0 162.024 x 24 x 18 24.000 x 24.000 x 18.000 – – 20.00 357.1

600 x 600 x 500 609.6 x 609.6 x 508.0–

– –321T02421

508.0 162.024 x 24 x 20 24.000 x 24.000 x 20.000 – – 20.00 357.1

= 1 for red paint finish, 2 for hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



C to E

C to E

C to E

C to E


GROOVED FITTINGS

Grooved

Fittings

69

Figure 322 Reducing Tees (Groove x Groove x Female BSP Thread)

Part Number

Pipe Size C to GE &C to TE

mmInches

Approx. WeightKg.Lbs.

Nominalmm

Inches

O.D.mm

Inches

322F02020250 x 50 x 50 60.3 x 60.3 x 60.3 ISO R7 82.6 1.2

2 x 2 x 2 2.375 x 2.375 x 2.375 3.25 2.6

322F02620265 x 65 x 50 76.1 x 76.1 x 60.3 ISO R7 95.2 1.8

76.1 x 76.1mm x 2 3.000 x 3.000 x 2.375 3.75 4.0

322F02625265 x 65 x 50 76.1 x 76.1 x 76.1 ISO R7 95.2 1.9

76.1 x 76.1 x 76.1mm 3.000 x 3.000 x 3.000 3.75 4.2

322F03020280 x 80 x 50 88.9 x 88.9 x 60.3 ISO R7 108.0 2.2

3 x 3 x 2 3.500 x 3.500 x 2.375 4.25 4.9

322F03025280 x 80 x 65 88.9 x 88.9 x 73.0 ISO R7 108.0 2.33 x 3 x 2 1

2 3.500 x 3.500 x 2.875 4.25 5.1

322F042202100 x 100 x 50 114.3 x 114.3 x 60.3 ISO R7 127.0 2.6

4 x 4 x 2 4.500 x 4.500 x 2.375 5.00 5.7

322F042262100 x 100 x 65 114.3 x 114.3 x 76.1 ISO R7 127.0 2.8

4 x 4 x 76.1mm 4.500 x 4.500 x 3.00 5.00 6.2

Only available in hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Figure 222 Hydrant Tee

Part Number

Pipe SizeHydrantOutlet

ISO

Max. WorkingPressure

psiBar

AmmIn.

BmmIn.

CmmIn.

Approx.Weight

Kg.Lbs.

NominalSizeDNIn.

PipeODmmIn.

22V42262100 114.3 R7 20.7 190 70 133 4.64 4.500 DN65 300 7.48 2.76 5.24 10.1

Available in hot dipped galvanizing only.See page 51 for fitting specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

C

B

A

C to E

C to E

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Figure 250 Concentric Reducer Cast

Figure 350 Concentric Reducer Fabricated

E to E E to E

Figures 250 & 350 Concentric Reducers(Page 1 of 3)



Nominal DNIn.

O.D.mmIn.

Part Number

E to E mmIn.

Approx. Weight

kgLbs.

Part Number

E to E mmIn.

Approx. Weight

kgLbs.

32 x 25 42.4 x 33.7 250M01210 63.5 0.3 – — —1- 1

4 x 1 1.660 x 1.315 2.50 0.7 — —40 x 25 48.3 x 33.7 250M01510 63.5 0.3 – — —1- 1

2 x 1 1.900 x 1.315 2.50 0.7 — —40 x 32 48.3 x 42.4 250A01512 63.5 0.3 – — —

1- 12 x 1- 1

4 1.900 x 1.660 2.50 0.8 — —50 x 25 60.3 x 33.7 250M02010 63.5 0.4 – — —2 x 1 2.375 x 1.315 2.50 0.9 — —

50 x 32 60.3 x 42.4 250M02012 63.5 0.4 – — —2 x 1- 1

4 2.375 x 1.660 2.50 0.9 — —50 x 40 60.3 x 48.3 250M02015 63.5 0.5 – — —2 x 1- 1

2 2.375 x 1.900 2.50 1.0 — —65 x 25 73.0 x 33.7

–— —

350F0261063.5 0.5

2- 12 x 1 2.875 x 1.315 — — 2.50 1.2

65 x 50 73.0 x 60.3 250M02520 63.5 0.6 – — —2- 1

2 x 2 2.875 x 2.375 2.50 1.3 — —65 x 32 76.1 x 42.4 250M02612 63.5 0.6 – — —

76.1mm x 1- 14 3.000 x 1.660 2.50 1.4 — —

65 x 40 76.1 x 48.3 250M02615 63.5 0.6 – — —76.1mm x 1- 1

2 3.000 x 1.900 2.50 1.4 — —65 x 50 76.1 x 60.3 250M02620 63.5 0.7 – — —

76.1mm x 2 3.000 x 2.375 2.50 1.5 — —80 x 40 88.9 x 48.3 250A03015 63.5 0.8 – — —3 x 1- 1

2 3.500 x 1.900 2.50 1.8 — —80 x 50 88.9 x 60.3 250M03020 63.5 0.8 – — —3 x 2 3.500 x 2.375 2.50 1.7 — —

80 x 65 88.9 x 73.0 250M03025 63.5 0.8 – — —3 x 2- 1

2 3.500 x 2.875 2.50 1.7 — —80 x 65 88.9 x 76.1 250M03026 63.5 0.9 – — —

3 x 76.1mm 3.500 x 3.000 2.50 2.0 — —100 x 50 114.3 x 60.3 250M04220 76.2 1.1 – — —

4 x 2 4.500 x 2.375 3.00 2.4 — —100 x 65 114.3 x 73.0 250M04225 76.2 1.2 – — —4 x 2- 1

2 4.500 x 2.875 3.00 2.7 — —100 x 65 114.3 x 76.1 250M04226 76.2 1.5 – — —

4 x 76.1mm 4.500 x 3.000 3.00 3.2 — —100 x 80 114.3 x 88.9 250M04230 76.2 1.3 – — —

4 x 3 4.500 x 3.500 3.00 2.8 — —100 x 100 114.3 x 108.0 – — — 350F04241 140.0 1.5

4 x 108.0mm 4.500 x 4.252 — — 5.51 3.3125 x 80 139.7 x 88.9 250M05230 88.9 1.9 – — —

139.7mm x 3 5.500 x 3.500 3.50 4.2 — —125 x 100 139.7 x 114.3 250M05242 88.9 2.0 – — —

139.7mm x 4 5.500 x 4.500 3.50 4.4 — —125 x 100 141.3 x 114.3 250M05342 88.9 2.0 – — —

5 x 4 5.563 x 4.500 3.50 4.4 — —150 x 80 165.1 x 88.9 250M06230 101.6 2.5 – — —

165.1mm x 3 6.500 x 3.500 4.00 5.5 — —150 x 100 165.1 x 114.3 250M06242 101.6 2.7 – — —

165.1mm x 4 6.500 x 4.500 4.00 6.0 — —


GROOVED FITTINGS

Grooved

Fittings

71



E to EFigure 250

Cast Concentric Reducer

Figure 350 Fabricated Concentric

Reducer

E to E


Nominal DNIn.

O.D.mmIn.

Part Number

E to E mmIn.

Approx. Weight

kgLbs.

Part Number

E to E mmIn.

Approx. Weight

kgLbs.

150 x 125 165.1 x 139.7 250M06252 101.6 2.5 – — —165.1 x 139.7mm 6.500 x 5.500 4.00 5.6 — —

150 x 50 168.3 x 60.3 250M06320 101.6 2.7 – — —6 x 2 6.625 x 2.375 4.00 6.1 — —

150 x 65 168.3 x 76.1 250M06326 101.6 2.7 – — —6 x 76.1mm 6.625 x 3.000 4.00 6.1 — —

150 x 80 168.3 x 88.9 250A06330 101.6 2.6 – — —6 x 3 6.625 x 3.500 4.00 5.8 — —

150 x 100 168.3 x 114.3 250M06342 101.6 2.7 – — —6 x 4 6.625 x 4.500 4.00 6.0 — —

150 x 125 168.3 x 139.7 250M06352 101.6 2.3 – — —6 x 139.7mm 6.625 x 5.500 4.00 6.3 — —

150 x 125 168.3 x 141.3 250M06353 101.6 2.8 – — —6 x 5 6.625 x 5.563 4.00 6.2 — —

150 x 125 168.3 x 159.0 – — — 350F06361 140.0 3.26 x 159.0mm 6.625 x 6.260 — — 5.00 7.1

150 x 150 168.3 x 165.1 – — — 350F06362 127.0 5.56 x 165.1mm 6.625 x 6.500 — — 5.00 12.1

200 x 100 219.1 x 114.3 250A08042 127.0 4.9 – — —8 x 4 8.625 x 4.500 5.00 10.7 — —

200 x 125 219.1 x 139.7 250M08052 127.0 4.5 – — —8 x 139.7mm 8.625 x 5.500 5.00 10.0 — —

200 x 125 219.1 x 141.3–

127.0 4.9350F08053

— —8 x 5 8.625 x 5.563 5.00 10.8 — —

200 x 150 219.1 x 165.1250M08062

127.0 5.0–

— —8 x 165.1mm 8.625 x 6.500 5.00 11.0 — —

200 x 150 219.1 x 168.3 250A08063 127.0 5.1 – — —8 x 6 8.625 x 6.625 5.00 11.3 — —

250 x 100 273.0 x 114.3 – — — 350F01142 152.4 9.310 x 4 10.750 x 4.500 — — 6.00 20.5

250 x 125 273.0 x 139.7 – — — 350F01152 152.4 9.110 x 139.7mm 10.750 x 5.500 — — 6.00 20.1

250 x 150 273.0 x 165.1 250M01162 152.4 8.0 – — —10 x 165.1mm 10.750 x 6.500 6.00 17.8 — —

250 x 150 273.0 x 168.3 250A01163 152.4 7.4 – — —10 x 6 10.750 x 6.625 6.00 16.3 — —

250 x 200 273.0 x 219.1 250A01180 152.4 8.3 – — —10 x 8 10.750 x 8.625 6.00 18.3 — —

300 x 100 323.9 x 114.3 250A01342 177.8 10.3 – — —12 x 4 12.750 x 4.500 7.00 22.7 — —

300 x 150 323.9 x 165.1 – — — 350F01362 303.0 11.312 x 165.1mm 12.750 x 6.500 — — 7.00 24.9

300 x 150 323.9 x 168.3 250A01363 177.8 11.0 – — —12 x 6 12.750 x 6.625 7.00 24.2 — —

300 x 200 323.9 x 219.1 250A01380 177.8 11.7 – — —12 x 8 12.750 x 8.625 7.00 25.8 — —

300 x 250 323.9 x 273.0 250A01311 177.8 12.8 – — —12 x 10 12.750 x 10.750 7.00 28.2 — —

350 x 150 355.6 x 165.1–

— —350T01462

330.2 24.614 x 165.1mm 14.000 x 6.500 — — 13.0 54.3

350 x 150 355.6 x 168.3–

— —350T01463

330.2 24.614 x 6 14.000 x 6.625 — — 13.0 54.3

350 x 200 355.6 x 219.1–

— —350T01480

330.2 24.714 x 8 14.000 x 8.625 — — 13.0 54.5

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings





Nominal DNIn.

O.D.mmIn.

Part Number

E to E mmIn.

Approx. Weight

kgLbs.

Part Number

E to E mmIn.

Approx. Weight

kgLbs.

350 x 250 355.6 x 273.0–

— —350T01411

330.2 25.314 x 10 14.000 x 10.750 — — 13.0 55.8

350 x 300 355.6 x 323.9–

— —350T01413

330.2 26.014 x 12 14.000 x 12.750 — — 13.0 57.3

400 x 200 406.4 x 219.1–

— —350T01680

355.6 29.716 x 8 16.000 x 8.625 — — 14.0 65.4

400 x 250 406.4 x 273.0–

— —350T01611

355.6 30.216 x 10 16.000 x 10.750 — — 14.0 66.7

400 x 300 406.4 x 323.9–

— —350T01613

355.6 30.916 x 12 16.000 x 12.750 — — 14.0 68.1

400 x 350 406.4 x 355.6–

— —350T01614

355.6 32.216 x 14 16.000 x 14.000 — — 14.0 71.0

450 x 300 457.2 x 323.9–

— —350T01813

381.0 37.918 x 12 18.000 x 12.750 — — 15.0 83.6

450 x 350 457.2 x 355.6–

— —350T01814

381.0 39.118 x 14 18.000 x 14.000 — — 15.0 86.2

450 x 400 457.2 x 406.4–

— —350T01816

381.0 39.618 x 16 18.000 x 16.000 — — 15.0 87.2

500 x 250 508.0 x 273.0–

— —350T02111

508.0 56.620 x 10 20.000 x 10.750 — — 20.0 124.7

500 x 300 508.0 x 323.9–

— —350T02113

508.0 56.620 x 12 20.000 x 12.750 — — 20.0 124.7

500 x 350 508.0 x 355.6–

— —350T02114

508.0 58.520 x 14 20.000 x 14.000 — — 20.0 129.0

500 x 400 508.0 x 406.4–

— —350T02116

508.0 59.520 x 16 20.000 x 16.000 — — 20.0 131.1

500 x 450 508.0 x 457.2–

— —350T02118

508.0 60.520 x 18 20.000 x 18.000 — — 20.0 133.4

600 x 250 609.6 x 273.0–

— —350T02411

508.0 67.624 x 10 24.000 x 10.750 — — 20.0 149.1

600 x 300 609.6 x 323.9–

— —350T02413

508.0 68.224 x 12 24.000 x 12.750 — — 20.0 150.4

600 x 350 609.6 x 355.6–

— —350T02414

508.0 68.824 x 14 24.000 x 14.000 — — 20.0 151.6

600 x 400 609.6 x 406.4–

— —350T02416

508.0 69.324 x 16 24.000 x 16.000 — — 20.0 152.8

600 x 450 609.6 x 457.2–

— —350T02418

508.0 69.924 x 18 24.000 x 18.000 — — 20.0 154.1

600 x 500 609.6 x 508.0–

— —350T02421

508.0 70.524 x 20 24.000 x 20.000 — — 20.0 155.5

= 1 for red paint finish, 2 for hot dipped galvanised finish♦ Contact GRINNELL Sales Representative for dimension details.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

E to EFigure 250

Cast Concentric Reducer

Figure 350 Fabricated Concentric

Reducer

E to E


GROOVED FITTINGS

Grooved

Fittings

73

Figure 351 Fabricated Eccentric Reducer

(Segment Welded)Figure 251

Cast Eccentric Reducer

E to EE to E


Nominalmm

Inches

O.D.mm

Inches

Part Number

E to E mm

Inches

Approx. Weight

Kg.Lbs.

Part Number

E to E mm

Inches

Approx. Weight

Kg.Lbs.

50 x 25 60.3 x 33.7–

— —351F02010

223.6 1.02 x 1 2.375 x 1.315 — — 9.0 2.2

50 x 32 60.3 x 42.4–

— —351F02012

228.6 1.12 x 1 1

4 2.375 x 1.660 — — 9.0 2.4

50 x 40 60.3 x 48.3–

— —351F02015

228.6 1.12 x 1 1

2 2.375 x 1.900 — — 9.0 2.5

65 x 40 76.1 x 48.3–

— —351F02615

241.3 1.676,1mm x 1 1

2 3.000 x 1.900 — — 9.5 3.6

65 x 50 76.1 x 60.3–

— —351F02620

241.3 1.876,1mm x 2 3.000 x 2.375 — — 9.5 4.0

80 x 50 88.9 x 60.3251A03020

88.9 0.9–

— —3 x 2 3.500 x 2.375 3.5 2.0 — —

80 x 65 88.9 x 73.0251A03025

88.9 1.0–

— —3 x 2 1

2 3.500 x 2.875 3.5 2.2 — —

80 x 65 88.9 x 76.1–

— —351F03026

241.3 2.83 x 76,1mm 3.500 x 3.000 — — 9.5 6.1

100 x 50 114.3 x 60.3251A04220

101.6 1.4–

— —4 x 2 4.500 x 2.375 4.0 3.0 — —

100 x 65 114.3 x 73.0251A04225

101.6 1.4–

— —4 x 2 1

2 4.500 x 2.875 4.0 3.1 — —

100 x 65 114.3 x 76.1–

— —351F04226

254.0 3.74 x 76,1mm 4.500 x 3.000 — — 10.0 8.2

100 x 80 114.3 x 88.9251A04230

101.6 1.5–

— —4 x 3 4.500 x 3.500 4.0 3.3 — —

125 x 80 139.7 x 88.9–

— —351F05230

279.4 5.7139.7mm x 3 5.500 x 3.500 — — 11.0 12.6

125 x 100 139.7 x 114.3–

— —351F05242

279.4 5.9139.7mm x 4 5.500 x 4.500 — — 11.0 13.0

125 x 100 141.3 x 114.3251A05342

127.5 2.6–

— —5 x 4 5.563 x 4.500 5.0 5.7 — —

150 x 50 165.1 x 60.3–

— —351F06220

292.1 6.7165,1mm x 2 6.500 x 2.375 — — 11.5 14.8

150 x 80 165.1 x 88.9–

— —351F06230

292.1 6.2165,1mm x 3 6.500 x 3.500 — — 11.5 14.7

150 x 100 165.1 x 114.3–

— —351F06242

292.1 7.1165,1mm x 4 6.500 x 4.500 — — 11.5 14.9

150 x 100 165.1 x 139.7–

— —351F06252

292.1 7.2165,1 x 139.7mm 6.500 x 5.500 — — 11.5 15.9

150 x 50 168.3 x 60.3–

— —351F06320

292.1 5.56 x 2 6.625 x 2.375 — — 11.5 12.2

150 x 80 168.3 x 88.9251A06330

139.7 3.4–

— —6 x 3 6.625 x 3.500 5.5 7.4 — —

Figures 251 & 351 Eccentric Reducers(Page 1 of 3)


www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings





(Segment Welded)

Figure 251 Cast Eccentric Reducer

E to EE to E


Nominalmm

Inches

O.D.mm

Inches

Part Number

E to E mm

Inches

Approx. Weight

Kg.Lbs.

Part Number

E to E mm

Inches

Approx. Weight

Kg.Lbs.

150 x 100 168.3 x 114.3251A06342

139.7 3.4–

— —6 x 4 6.625 x 4.500 5.5 7.5 — —

150 x 125 168.3 x 139.7–

— —351F06352

292.1 7.26 x 139.7mm 6.625 x 5.500 — — 11.5 15.9

150 x 125 168.3 x 141.3251A06353

139.7 3.7–

— —6 x 5 6.625 x 5.563 5.5 8.1 — —

200 x 80 219.1 x 88.9–

— —351F08030

304.8 8.18 x 3 8.625 x 3.500 — — 12.0 17.9

200 x 100 219.1 x 114.3–

— —351F08042

304.8 9.88 x 4 8.625 x 4.500 — — 12.0 19.7

200 x 125 219.1 x 139.7–

— —351F08052

304.8 9.78 x 139.7mm 8.625 x 5.500 — — 12.0 21.4

200 x 125 219.1 x 141.3–

— —351F08053

304.8 9.78 x 5 8.625 x 5.563 — — 12.0 21.4

200 x 150 219.1 x 165.1–

— —351F08062

304.8 10.98 x 165,1mm 8.625 x 6.500 — — 12.0 24.0

200 x 150 219.1 x 168.3–

— —351F08063

304.8 10.98 x 6 8.625 x 6.625 — — 12.0 24.0

250 x 100 273.0 x 114.3–

— —351F01142

330.2 13.510 x 4 10.750 x 4.500 — — 13.0 29.7

250 x 125 273.0 x 139.7–

— —351F01152

330.2 14.410 x 139.7mm 10.750 x 5.500 — — 13.0 31.7

250 x 125 273.0 x 141.3–

— —351F01153

330.2 14.410 x 5 10.750 x 5.563 — — 13.0 31.7

250 x 150 273.0 x 165.1–

— —351F01162

330.2 15.410 x 165,1mm 10.750 x 6.500 — — 13.0 34.0

250 x 150 273.0 x 168.3–

— —351F01163

330.2 15.410 x 6 10.750 x 6.625 — — 13.0 34.0

250 x 200 273.0 x 219.1–

— —351F01180

330.2 15.610 x 8 10.750 x 8.625 — — 13.0 34.4

300 x 100 323.9 x 114.3–

— —351F01342

355.6 20.312 x 4 12.750 x 4.500 — — 14.0 44.8

300 x 150 323.9 x 165.1–

— —351F01362

355.6 20.512 x 165,1mm 12.750 x 6.500 — — 14.0 45.2

300 x 150 323.9 x 168.3–

— —351F01363

355.6 20.512 x 6 12.750 x 6.625 — — 14.0 45.2

300 x 200 323.9 x 219.1–

— —351F01380

355.6 21.612 x 8 12.750 x 8.625 — — 14.0 47.7

300 x 250 323.9 x 273.0–

— —351F01411

355.6 23.612 x 10 12.750 x 10.750 — — 14.0 52.0

350 x 150 355.6 x 165.1–

— —351T01462

482.6 35.414 x 165,1mm 14.000 x 6.500 — — 19.0 78.0

350 x 150 355.6 x 168.3–

— —351T01463

482.6 35.414 x 6 14.000 x 6.625 — — 19.0 78.0


GROOVED FITTINGS

Grooved

Fittings

75


(Segment Welded)

Figure 251 Cast Eccentric Reducer

E to EE to E


Nominalmm

Inches

O.D.mm

Inches

Part Number

E to E mm

Inches

Approx. Weight

Kg.Lbs.

Part Number

E to E mm

Inches

Approx. Weight

Kg.Lbs.

350 x 200 355.6 x 219.1–

— —351T01480

482.6 36.314 x 8 14.000 x 8.625 — — 19.0 80.0

350 x 250 355.6 x 273.0–

— —351T01411

482.6 38.114 x 10 14.000 x 10.750 — — 19.0 84.0

350 x 300 355.6 x 323.9–

— —351T01413

482.6 39.914 x 12 14.000 x 12.750 — — 19.0 88.0

400 x 200 406.4 x 219.1–

— —351T01680

508.0 41.316 x 8 16.000 x 8.625 — — 20.0 91.0

400 x 250 406.4 x 273.0–

— —351T01611

508.0 43.516 x 10 16.000 x 10.750 — — 20.0 96.0

400 x 300 406.4 x 323.9–

— —351T01613

508.0 44.916 x 12 16.000 x 12.750 — — 20.0 99.0

400 x 350 406.4 x 355.6–

— —351T01614

508.0 47.216 x 14 16.000 x 14.000 — — 20.0 104.0

450 x 300 457.2 x 323.9–

— —351T01813

533.0 51.318 x 12 18.000 x 12.750 — — 21.0 113.0

450 x 350 457.2 x 355.6–

— —351T01814

533.0 53.118 x 14 18.000 x 14.000 — — 21.0 117.0

450 x 400 457.2 x 406.4–

— —351T01816

533.0 54.918 x 16 18.000 x 16.000 — — 21.0 121.0

500 x 250 508.0 x 273.0–

— —351T02111

660.4 65.820 x 10 20.000 x 10.750 — — 26.0 145.0

500 x 300 508.0 x 323.9–

— —351T02113

660.4 67.620 x 12 20.000 x 12.750 — — 26.0 149.0

500 x 350 508.0 x 355.6–

— —351T02114

660.4 68.920 x 14 20.000 x 14.000 — — 26.0 152.0

500 x 400 508.0 x 406.4–

— —351T02116

660.4 70.820 x 16 20.000 x 16.000 — — 26.0 156.0

500 x 450 508.0 x 457.2–

— —351T02118

660.4 72.620 x 18 20.000 x 18.000 — — 26.0 160.0

600 x 250 609.6 x 273.0–

— —351T02411

660.4 78.924 x 10 24.000 x 10.750 — — 26.0 147.0

600 x 300 609.6 x 323.9–

— —351T02413

660.4 81.224 x 12 24.000 x 12.750 — — 26.0 179.0

600 x 350 609.6 x 355.6–

— —351T02414

660.4 83.524 x 14 24.000 x 14.000 — — 26.0 184.0

600 x 400 609.6 x 406.4–

— —351T02416

660.4 85.724 x 16 24.000 x 16.000 — — 26.0 189.0

600 x 450 609.6 x 457.2–

— —351T02418

660.4 88.024 x 18 24.000 x 18.000 — — 26.0 194.0

600 x 500 609.6 x 508.0–

— —351T02421

660.4 90.324 x 20 24.000 x 20.000 — — 26.0 199.0

= 1 for red paint finish, 2 for hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


C to LE

C to SEC to LE

Figure 314 45° LateralsTech Data Sheet: G180

Part Number

Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

314F0003425 33.7 127.0 57.0 0.71 1.315 5.00 2.24 1.5

314F0004232 42.4 146.1 63.5 1.11

1 14 1.660 5.75 2.50 2.4

314F0004840 48.3 158.8 69.9 1.6

1 12 1.900 6.25 2.75 3.5

314F0006050 60.3 177.8 69.9 2.02 2.375 7.00 2.75 4.4

314F0007665 76.1 196.9 76.2 4.5

76,1mm 3.000 7.75 3.00 9.9

314F0008980 88.9 215.9 82.6 5.03 3.500 8.50 3.25 11.0

314F00114100 114.3 266.7 95.3 8.34 4.500 10.50 3.75 18.3

314F00139125 139.7 317.5 102.0 13.6

139,7mm 5.500 12.50 4.00 30.0

314F00165150 165.1 355.6 114.3 21.1

165,1mm 6.500 14.00 4.50 46.5

314F00168150 168.3 355.6 114.3 21.16 6.625 14.00 4.50 46.5

314F00219200 219.1 457.2 152.4 37.68 8.625 18.00 6.00 82.9

314F00273250 273.0 520.7 165.71 57.410 10.750 20.50 6.50 126.5

314F00324300 323.9 584.2 177.8 74.812 12.750 23.00 7.00 164.9

= 1 for red paint finish, 2 for hot dipped galvanised finishFor information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or



GROOVED FITTINGS

Grooved

Fittings

77

C to SE

C to LE

C to LE

Figure 325 45° Reducing LateralsTech Data Sheet: G180

Part Number

Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

325F0302080 x 50 88.9 x 60.3 215.9 82.6 4.13 x 2 3.500 x 2.375 8.50 3.25 9.0

325F0302680 x 76.1 88.9 x 76.1 216.0 83.0 5.2

3 x 76,1mm 3.500 x 3.000 8.50 3.25 11.5

325F04220100 x 50 114.3 x 60.3 266.7 95.3 6.7

4 x 2 4.500 x 2.375 10.50 3.75 14.7

325F04226100 x 65 114.3 x 76.1 267.0 95.0 7.7

4 x 76,1mm 4.500 x 3.000 10.50 3.75 16.9

325F04230100 x 80 114.3 x 88.9 266.7 95.3 7.7

4 x 3 4.500 x 3.500 10.50 3.75 16.9

325F05220125 x 50 139.7 x 60.3 318.1 102.0 10.2

139,7mm x 2 5.500 x 2.375 12.50 4.00 22.4

325F05230125 x 80 139.7 x 88.9 318.0 102.0 12.0

139,7mm x 3 5.500 x 3.500 12.50 4.00 26.5

325F05242125 x 100 139.7 x 114.3 318.0 102.0 13.8

139,7mm x 4 5.500 x 4.500 12.50 4.00 30.4

325F06220150 x 50 165.1 x 60.3 356.0 114.0 15.0

165,1mm x 2 6.500 x 2.375 14.00 4.50 33.1

325F06230150 x 80 165.1 x 88.9 356.0 114.0 16.8

165,1mm x 3 6.500 x 3.500 14.00 4.50 37.0

325F06242150 x 100 165.1 x 114.3 356.0 114.0 18.1

165,1mm x 4 6.500 x 4.500 14.00 4.50 39.9

325F06252150 x 125 165.1 x 139.7 356.0 114.0 20.4

165,1 x 139,7mm 6.500 x 5.500 14.00 4.50 45.0

325F06320150 x 50 168.3 x 60.3 355.6 114.3 14.4

6 x 2 6.625 x 2.375 14.00 4.50 31.7

325F06330150 x 80 168.3 x 88.9 355.6 114.3 15.6

6 x 3 6.625 x 3.500 14.00 4.50 34.4

325F06342150 x 100 168.3 x 114.3 355.6 114.3 16.6

6 x 4 6.625 x 4.500 14.00 4.50 36.5

325F06352150 x 125 168.3 x 139.7 356.0 114.0 20.4

6 x 139,7mm 6.625 x 5.500 14.00 4.50 45.0

325F08042200 x 100 219.1 x 114.1 457.2 152.4 26.7

8 x 4 8.625 x 4.500 18.00 6.00 58.9

325F08052200 x 125 219.1 x 139.7 457.0 152.0 30.8

8 x 139,7mm 8.625 x 5.500 18.00 6.00 67.9

325F08063200 x 150 219.1 x 168.3 457.2 152.4 30.0

8 x 6 8.625 x 6.625 18.00 6.00 66.1

325F01042250 x 100 273.0 x 114.3 520.7 165.1 39.6

10 x 4 10.750 x 4.500 20.50 6.50 87.3

325F01052250 x 125 273.0 x 139.7 521.0 165.0 45.4

10 x 139,7mm 10.750 x 5.500 20.50 6.50 100.1

325F01063250 x 150 273.0 x 168.3 520.7 165.1 43.0

10 x 6 10.750 x 6.625 20.50 6.50 94.7

325F01080250 x 200 273.0 x 219.1 520.7 165.1 45.0

10 x 8 10.750 x 8.625 20.50 6.50 99.2

325F01242300 x 100 323.9 x 114.3 584.2 177.8 54.7

12 x 4 12.750 x 4.500 23.00 7.00 120.6

325F01263300 x 150 323.9 x 168.3 584.2 177.8 58.3

12 x 6 12.750 x 6.625 23.00 7.00 128.5

325F01280300 x 200 323.9 x 219.1 584.2 177.8 60.4

12 x 8 12.750 x 8.625 23.00 7.00 133.1 = 1 for red paint finish, 2 for hot dipped galvanised finish

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page


www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


E1

E2H

G

E1

E2H

G

Figure 330 Tee Wyes(Page 1 of 2)


Pipe SizeG

mmInches

H mm

Inches

E1 mm

Inches

E2 mm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches50 x 50 x 50 60.3 x 60.3 x 60.3 69.9 177.8 228.6 187.2 2.6

2 x 2 x 2 2.375 x 2.375 x 2.375 2.75 7.00 9.00 7.37 5.7

65 x 65 x 65 73.0 x 73.0 x 73.0 76.2 196.9 266.7 224.5 4.62 1

2 x 2 12 x 2 1

2 2.875 x 2.875 x 2.875 3.00 7.75 10.50 8.84 10.2

80 x 80 x 80 88.9 x 88.9 x 88.9 82.6 215.9 292.1 236.5 6.53 x 3 x 3 3.500 x 3.500 x 3.500 3.25 8.50 11.50 9.31 14.4

100 x 100 x 80 114.3 x 114.3 x 88.9 95.3 266.7 327.2 258.3 9.34 x 4 x 3 4.500 x 4.500 x 3.500 3.75 10.50 12.88 10.17 20.5

100 x 100 x 100 114.3 x 114.3 x 114.3 95.3 266.7 346.2 301.5 11.24 x 4 x 4 4.500 x 4.500 x 4.500 3.75 10.50 13.63 11.87 24.6

125 x 125 x 80 141.3 x 141.3 x 88.9 101.6 317.5 362.0 336.6 12.95 x 5 x 3 5.563 x 5.563 x 3.500 4.00 12.50 14.25 13.25 28.4

125 x 125 x 100 141.3 x 141.3 x 114.3 101.6 317.5 384.3 346.1 14.95 x 5 x 4 5.563 x 5.563 x 4.500 4.00 12.50 15.13 13.63 32.8

125 x 125 x 125 141.3 x 141.3 x 141.3 101.6 317.5 409.7 355.6 17.65 x 5 x 5 5.563 x 5.563 x 5.563 4.00 12.50 16.13 14.00 38.8

150 x 150 x 80 168.3 x 168.3 x 88.9 114.3 355.6 388.9 376.2 17.26 x 6 x 3 6.625 x 6.625 x 3.500 4.50 14.00 15.31 14.81 37.9

150 x 150 x 100 168.3 x 168.3 x 114.3 114.3 355.6 412.8 387.4 19.36 x 6 x 4 6.625 x 6.625 x 4.500 4.50 14.00 16.25 15.25 42.5

150 x 150 x 125 168.3 x 168.3 x 141.3 114.3 355.6 438.2 396.9 22.06 x 6 x 5 6.625 x 6.625 x 5.563 4.50 14.00 17.25 15.63 48.5

150 x 150 x 150 168.3 x 168.3 x 168.3 114.3 355.6 463.6 406.4 25.56 x 6 x 6 6.625 x 6.625 x 6.625 4.50 14.00 18.25 16.00 56.3

200 x 200 x 80 219.1 x 219.1 x 88.9 152.4 457.2 462.0 487.2 30.58 x 8 x 3 8.625 x 8.625 x 3.500 6.00 18.00 18.19 19.18 67.3

200 x 200 x 100 219.1 x 219.1 x 114.3 152.4 457.2 482.6 495.3 32.88 x 8 x 4 8.625 x 8.625 x 4.500 6.00 18.00 19.00 19.50 72.3

200 x 200 x 125 219.1 x 219.1 x 141.3 152.4 457.2 508.0 504.7 35.78 x 8 x 5 8.625 x 8.625 x 5.563 6.00 18.00 20.00 19.87 78.8

200 x 200 x 150 219.1 x 219.1 x 168.3 152.4 457.2 536.7 517.4 39.68 x 8 x 6 8.625 x 8.625 x 6.625 6.00 18.00 21.13 20.37 87.4


GROOVED FITTINGS

Grooved

Fittings

79

Figure 330 Tee Wyes(Page 2 of 2)


E1

E2H

G

E1

E2H

G

Pipe SizeG

mmInches

H mm

Inches

E1 mm

Inches

E2 mm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches200 x 200 x 200 219.1 x 219.1 x 219.1 152.4 457.2 590.6 539.8 49.4

8 x 8 x 8 8.625 x 8.625 x 8.625 6.00 18.00 23.25 21.25 109.0

250 x 250 x 80 273.0 x 273.0 x 88.9 165.1 520.7 505.0 543.1 46.110 x 10 x 3 10.750 x 10.750 x 3.500 6.50 20.50 19.88 21.38 101.7

250 x 250 x 100 273.0 x 273.0 x 114.3 165.1 520.7 527.1 552.5 48.510 x 10 x 4 10.750 x 10.750 x 4.500 6.50 20.50 20.75 21.75 106.9

250 x 250 x 125 273.0 x 273.0 x 141.3 165.1 520.7 555.8 565.2 51.610 x 10 x 5 10.750 x 10.750 x 5.563 6.50 20.50 21.88 22.25 113.8

250 x 250 x 150 273.0 x 273.0 x 168.3 165.1 520.7 581.2 574.7 55.410 x 10 x 6 10.750 x 10.750 x 6.625 6.50 20.50 22.88 22.63 122.1

250 x 250 x 200 273.0 x 273.0 x 219.1 165.1 520.7 692.2 654.1 68.510 x 10 x 8 10.750 x 10.750 x 8.625 6.50 20.50 27.25 25.75 151.1

250 x 250 x 250 273.0 x 273.0 x 273.0 165.1 520.7 692.2 619.1 79.410 x 10 x 10 10.750 x 10.750 x 10.750 6.50 20.50 27.25 24.38 175.1

300 x 300 x 80 323.9 x 323.9 x 88.9 177.8 584.2 527.1 577.9 61.012 x 12 x 3 12.750 x 12.750 x 3.500 7.00 23.00 20.75 22.75 134.5

300 x 300 x 100 323.9 x 323.9 x 114.3 177.8 584.2 546.1 584.2 63.212 x 12 x 4 12.750 x 12.750 x 4.500 7.00 23.00 21.50 23.00 139.4

300 x 300 x 150 323.9 x 323.9 x 168.3 177.8 584.2 603.3 609.6 70.012 x 12 x 6 12.750 x 12.750 x 6.625 7.00 23.00 23.75 24.00 154.5

300 x 300 x 200 323.9 x 323.9 x 219.1 177.8 584.2 660.4 635.0 79.712 x 12 x 8 12.750 x 12.750 x 8.625 7.00 23.00 26.00 25.00 175.8

300 x 300 x 250 323.9 x 323.9 x 273.0 177.8 584.2 711.2 654.1 93.212 x 12 x 10 12.750 x 12.750 x 10.750 7.00 23.00 28.00 25.75 205.4

300 x 300 x 300 323.9 x 323.9 x 323.9 177.8 584.2 787.4 698.5 108.912 x 12 x 12 12.750 x 12.750 x 12.750 7.00 23.00 31.00 27.50 240.1

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


E1

G H

E2

Figure 331 Reducing Tee WyesTech Data Sheet: G180

Pipe SizeG

mmInches

H mm

Inches

E1 mm

Inches

E2 mm

Inches

Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches100 x 80 x 80 114.3 x 88.9 x 88.9 228.9 187.5 273.1 184.2 6.2

4 x 3 x 3 4.500 x 3.500 x 3.500 9.01 7.38 10.75 7.25 13.7

100 x 80 x 100 114.3 x 88.9 x 114.3 362.0 266.7 346.2 301.5 11.14 x 3 x 4 4.500 x 3.500 x 4.500 14.25 10.50 13.63 11.87 24.5

125 x 80 x 80 141.3 x 88.9 x 88.9 279.5 247.7 292.1 195.8 8.65 x 3 x 3 5.563 x 3.500 x 3.500 11.00 9.75 11.50 7.71 19.0

125 x 80 x 125 141.3 x 88.9 x 141.3 419.1 317.5 409.7 354.3 17.55 x 3 x 5 5.563 x 3.500 x 5.563 16.50 12.50 16.13 13.95 38.5

125 x 100 x 80 141.3 x 114.3 x 88.9 279.7 231.9 301.88 221.2 8.85 x 4 x 3 5.563 x 4.500 x 3.500 11.01 9.13 11.88 8.71 19.5

125 x 100 x 100 141.3 x 114.3 x 114.3 279.7 231.9 323.9 228.6 10.55 x 4 x 4 5.563 x 4.500 x 4.500 11.01 9.13 12.75 9.00 23.1

150 x 100 x 150 168.3 x 114.3 x 168.3 469.9 355.6 463.6 349.3 25.56 x 4 x 6 6.625 x 4.500 x 6.625 18.50 14.00 18.25 13.75 56.2

150 x 125 x 80 168.3 x 141.3 x 88.9 304.9 273.1 330.2 235.0 11.66 x 5 x 3 6.625 x 5.563 x 3.500 12.00 10.75 13.00 9.25 25.6

150 x 125 x 100 168.3 x 141.3 x 114.3 304.9 273.1 352.6 244.3 13.36 x 5 x 4 6.625 x 5.563 x 4.500 12.00 10.75 13.88 9.62 29.3

200 x 150 x 100 219.1 x 168.3 x 114.3 330.2 304.8 374.7 260.3 18.28 x 6 x 4 8.625 x 6.625 x 4.500 13.00 12.00 14.75 10.25 40.2

200 x 150 x 200 219.1 x 168.3 x 219.1 609.6 457.2 590.6 539.8 49.38 x 6 x 8 8.625 x 6.625 x 8.625 24.00 18.00 23.25 21.25 108.6

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


GROOVED FITTINGS

Grooved

Fittings

81

Figure 391 Fabricated Adapter NippleGroove x Male BSP Thread

Figure 392 Fabricated Adapter Nipple

Groove x Groove


Groove x Plain

E to E

E to E

E to E

Pipe SizeE to E mm

Inches

Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches32 42.4 101.6 0.411

4 1.660 4.00 0.8

40 48.3 101.6 0.411

2 1.900 4.00 0.9

50 60.3 101.6 0.52 2.375 4.00 1.2

65 73.0 101.6 0.921

2 2.875 4.00 1.9

80 88.9 101.6 1.13 3.500 4.00 2.5

100 114.3 154.4 2.44 4.500 6.00 5.4

125 141.3 154.4 3.35 5.563 6.00 7.3

150 168.3 154.4 4.36 6.625 6.00 9.4

200 219.1 154.4 6.48 8.625 6.00 14.2

250 273.0 203.2 12.210 10.750 8.00 27.0

300 323.9 203.2 15.012 12.750 8.00 33.0

For information on alternative sizes, contact a GRINNELL Sales Representative.

See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability,

refer to page 15 or contact a GRINNELL Sales Representative.

Figures 391, 392 & 393 Adapter NipplesTech Data Sheet: G180

www.grinnell.com

GROOVED FITTINGS

Grooved

Fittings


Figure 305 Groove x Female BSP Thread Nipple, Machined

Part Number

NominalSizemm

Inches

ØAmm

Inches

Bmm

Inches

Lmm

Inches

Approx. Weight

Kg.Lbs.

305H00034225 33.7 33.2 50 0.11 1.315 1.31 1.97 0.2

305H00042232 42.4 41.9 50 0.2

1 14 1.660 1.65 1.97 0.4

305H00048240 48.3 47.8 50 0.3

1 12 1.900 1.88 1.97 0.7

305H00060250 60.3 59.6 100 0.52 2.375 2.35 3.94 1.1

305H00076265 76.1 75.1 100 0.8

76,1mm 3.000 2.96 3.94 1.8

305H00089280 88.9 88.5 100 1.23 3.500 3.48 3.94 2.6

Only available in galvanised finish.For information on alternative sizes, contact a GRINNELL Sales

Representative.See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability,


L

BA

Part Number

NominalSizemm

Inches

ØAmm

Inches

Bmm

Inches

Lmm

Inches

Approx. Weight

Kg.Lbs.

304H00034225 33.7 33.2 55 0.11 1.315 1.31 2.17 0.2

304H00042232 42.4 41.9 63 0.2

1 14 1.660 1.65 2.48 0.4

304H00048240 48.3 47.8 59 0.3

1 12 1.900 1.88 2.32 0.7

304H00060250 60.3 59.6 68 0.52 2.375 2.35 2.68 1.1

304H00076265 76.1 75.2 75 0.8

76.1mm 3.000 2.96 2.95 1.8

304H00089280 88.9 87.9 80 1.43 3.500 3.46 3.15 3.1

Only available in galvanised finish.a range of fabricated adaptor nipple; grooved to plain or BSP is

also available on request. Please contact your GRINNELL sales representative or Sales Office for further information

See page 51 for fitting specifications.For instructions on part numbers, ordering information, and availability,


Figure 304 Groove x Male BSP Thread Nipple, Machined

L

BA

OUTLET FITTINGS

83

www.grinnell.com

OUTLET FITTINGS

Outlet

Fittings


The GRINNELL Figure 730 Mechanical Tee is rated at 34.5 Bar (500 psi) on standard weight pipe. It can be used in place of a tee, a cross connection, or a welded outlet where a threaded or grooved outlet is needed. The Mechanical Tee is ideal for use in retrofit or equipment hookup installations as it can be positioned along the pipe at the proper location in the field, ensuring exact lineup of the branch outlet connection. The GRINNELL Figure 730 can be used on steel or HDPE pipe.

All GRINNELL Figure 730 Mechanical Tees are provided with a ductile iron lower housing section for increased strength and dependability. This design provides stability and rigidity while inhibiting damage to the pipe during tightening.

MATERIAL SPECIFICATIONSHousing Specifications

ductile iron castings, Grade 65-45-12

(65,000 psi) (45,000 psi)

(2"), minimum 12%

galvanizing

Bolt/Nut Specifications Metric: Carbon steel oval neck track head bolts (Gold colour coded) are heat treated and conform to the physical properties of ASTM F 568 M with a minimum tensile strength of 760 MPa. Carbon steel heavy hex nuts conform to the physical properties of ASTM A 563 M Class 9. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

ANSI: Carbon steel oval neck bolts and nuts are heat-treated and conform to the physical properties of ASTM A 183 Grade 2 and SAE J429 Grade 5 with a minimum tensile strength of 7584 Bar (110,000 psi). Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 183 Grade 2 and SAE J995 Grade 5. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

request.

Figure 730 Female Threaded Tees

Pages 85 - 87

Figure 730 Grooved TeesPages 88 - 90

Outlet Fittings Table of Contents

Gasket Specifications gaskets have a Green colour

code stripe identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.

gaskets have an Orange colour code stripe identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C ( -20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapors.

Coatings


In addition, all sizes can be made into a cross configuration, threaded x threaded, groove x groove, and groove x threaded.


Issue 03, 04, 07Cert No. 570, 669, 673


OUTLET FITTINGS

Outlet

Fittings

85

Figure 730 Branch Outlet with Female BSP Threaded Branch (Tee Configuration)

BC

HoleDia.

A

E

D

Takeout

Figure 730 Mechanical Tees – Threaded(Page 1 of 3)


Part Number

Nominal Size Run x Branch

DNIn.

Hole Dia.† Max.‡ Branch

End LoadkN

Lbs.

Dimensions - mm In. Bolt Size mmIn.

Approx. Weight

kgLbs.

Min.mmIn.

Max.mmIn.

A B C D E

730AT200550 x 15 38.1 41.3 1.2 66.5 124.0 78.0 53.8 40.4 M10 x 57 1.12 x 1

2 1.50 1.63 277.1 2.62 4.88 3.07 2.12 1.59 38 x 2- 1

4 2.5

730AT200750 x 20 38.1 41.3 1.9 66.5 124.0 78.0 53.8 40.4 M10 x 57 1.02 x 3

4 1.50 1.63 433.0 2.62 4.88 3.07 2.12 1.59 38 x 2- 1

4 2.3

730AT201050 x 25 38.1 41.3 3.0 66.5 124.0 78.0 53.8 40.4 M10 x 57 1.02 x 1 1.50 1.63 679.1 2.62 4.88 3.07 2.12 1.59 3

8 x 2- 14 2.2

730AT201250 x 32 44.5 47.6 4.8 70.6 124.0 84.3 49.0 40.4 M10 x 57 1.12 x 1- 1

4 1.75 1.88 1082.1 2.78 4.88 3.32 1.93 1.59 38 x 2- 1

4 2.4

730AT201550 x 40 44.5 47.6 6.3 69.9 124.0 84.3 49.0 40.4 M10 x 57 1.12 x 1- 1

2 1.75 1.88 1417.6 2.75 4.88 3.32 1.93 1.59 38 x 2- 1

4 2.5

730AT250565 x 15 38.1 41.3 1.2 73.2 133.4 78.0 60.5 46.0 M10 x 57 1.1

2- 12 x 1 2 1.50 1.63 277.1 2.88 5.25 3.07 2.38 1.81 3

8 x 2- 14 2.4

730AT250765 x 20 38.1 41.3 1.9 73.2 133.4 78.0 60.5 46.0 M10 x 57 1.1

2- 12 x 3 4 1.50 1.63 433.0 2.88 5.25 3.07 2.38 1.81 3

8 x 2- 14 2.4

730AT251065 x 25 38.1 41.3 3.0 73.2 133.4 78.0 60.5 46.0 M10 x 57 1.1

2- 12 x 1 1.50 1.63 679.1 2.88 5.25 3.07 2.38 1.81 3

8 x 2- 14 2.4

730AT251265 x 32 50.8 54.0 4.8 76.2 133.4 90.4 55.6 46.0 M10 x 57 1.1

2- 12 x 1- 1

4 2.00 2.13 1082.1 3.00 5.25 3.56 2.19 1.81 38 x 2- 1

4 2.5

730AT251565 x 40 50.8 54.0 6.3 78.0 133.4 91.2 55.1 46.0 M10 x 57 1.2

2- 12 x 1- 1

2 2.00 2.13 1417.6 3.07 5.25 3.59 2.17 1.81 38 x 2- 1

4 2.6

730MT252065 x 50 50.8 54.0 9.9 81.0 133.4 101.6 62.0 46.0 M10 x 57 1.2

2- 12 x 2 2.00 2.13 2215.1 3.19 5.25 4.00 2.44 1.81 3

8 x 2- 14 2.7

730AT260565 x 15 38.1 41.3 1.2 74.5 142.7 78.0 62.0 47.5 M10 x 57 1.1

76.1mm x 12 1.50 1.63 277.1 2.94 5.62 3.07 2.44 1.87 – 2.5

730AT260765 x 20 38.1 41.3 1.9 74.5 142.7 78.0 62.0 47.5 M10 x 57 1.1

76.1mm x 34 1.50 1.63 433.0 2.94 5.62 3.07 2.44 1.87 – 2.5

730AT261065 x 25 38.1 41.3 3.0 74.5 142.7 78.0 62.0 47.5 M10 x 57 1.1

76.1mm x 1 1.50 1.63 679.1 2.94 5.62 3.07 2.44 1.87 – 2.5

730MT261265 x 32 50.8 54.0 4.8 77.7 142.7 90.4 57.2 47.5 M10 x 57 1.5

76.1mm x 1- 14 2.00 2.13 1082.1 3.06 5.62 3.56 2.25 1.87 – 3.3

730MT261565 x 40 50.8 54.0 6.3 79.5 142.7 90.4 57.2 47.5 M10 x 57 1.6

76.1mm x 1- 12 2.00 2.13 1417.6 3.13 5.62 3.56 2.25 1.87 – 3.6

730MT262065 x 50 50.8 54.0 9.9 82.6 142.7 101.6 63.5 47.5 M10 x 57 1.7

76.1mm x 2 2.00 2.13 2215.1 3.25 5.62 4.00 2.50 1.87 – 3.7

www.grinnell.com

OUTLET FITTINGS

Outlet

Fittings


Part Number


DNIn.


End LoadkN

Lbs.


Approx. Weight

kgLbs.

Min.mmIn.

Max.mmIn.

A B C D E

730MT300580 x 15 38.1 41.3 1.2 81.0 155.7 78.0 65.0 56.1 M12 x 89 1.73 x 1

2 1.50 1.63 277.1 3.19 6.13 3.07 2.56 2.21 12 x 3 3.7

730MT300780 x 20 38.1 41.3 1.9 81.0 155.7 78.0 65.0 56.1 M12 x 89 1.73 x 3

4 1.50 1.63 433.0 3.19 6.13 3.07 2.56 2.21 12 x 3 3.7

730MT301080 x 25 38.1 41.3 3.0 81.0 155.7 78.0 65.0 56.1 M12 x 89 1.73 x 1 1.50 1.63 679.1 3.19 6.13 3.07 2.56 2.21 1

2 x 3 3.7

730MT301280 x 32 44.5 47.6 4.8 84.8 155.7 84.3 63.5 56.1 M12 x 89 1.63 x 1- 1

4 1.75 1.88 1082.1 3.34 6.13 3.32 2.50 2.21 12 x 3 3.5

730MT301580 x 40 50.8 54.0 6.3 85.9 155.7 90.4 63.0 56.1 M12 x 89 1.73 x 1- 1

2 2.00 2.13 1417.6 3.38 6.13 3.56 2.48 2.21 12 x 3 3.7

730MT302080 x 50 63.5 66.7 9.9 88.9 155.7 103.9 69.9 56.1 M12 x 89 2.13 x 2 2.50 2.63 2215.1 3.50 6.13 4.09 2.75 2.21 1

2 x 3 4.7

730MT4205100 x 15 38.1 41.3 1.2 93.7 181.1 78.0 77.7 70.6 M12 x 89 2.24 x 1 2 1.50 1.63 277.1 3.69 7.13 3.07 3.06 2.78 1

2 x 3 4.8

730MT4207100 x 20 38.1 41.3 1.9 93.7 181.1 78.0 77.7 70.6 M12 x 89 2.24 x 3 4 1.50 1.63 433.0 3.69 7.13 3.07 3.06 2.78 1

2 x 3 4.8

730MT4210100 x 25 38.1 41.3 3.0 93.7 181.1 78.0 77.7 70.6 M12 x 89 2.2

4 x 1 1.50 1.63 679.1 3.69 7.13 3.07 3.06 2.78 12 x 3 4.8

730AT4212100 x 32 44.5 47.6 4.8 99.6 181.1 84.3 76.2 70.6 M12 x 89 2.24 x 1- 1

4 1.75 1.88 1082.1 3.92 7.13 3.32 3.00 2.78 12 x 3 4.8

730AT4215100 x 40 50.8 54.0 6.3 101.6 181.1 90.4 75.7 70.6 M12 x 89 2.34 x 1- 1

2 2.00 2.13 1417.6 4.00 7.13 3.56 2.98 2.78 12 x 3 5.1

730MT4220100 x 50 63.5 66.7 9.9 101.6 181.1 103.1 82.6 70.6 M12 x 89 2.5

4 x 2 2.50 2.63 2215.1 4.00 7.13 4.06 3.25 2.78 12 x 3 5.5

730MT4226100 x 65 69.9 73.0 15.7 101.6 181.1 111.3 79.2 70.6 M12 x 89 2.8

4 x 76.1mm 2.75 2.88 3534.3 4.00 7.13 4.38 3.12 2.78 – 6.2

730MT4230100 x 80 88.9 92.1 21.4 104.9 181.1 130.3 84.1 70.6 M12 x 89 3.5

4 x 3 3.50 3.63 4810.6 4.13 7.13 5.13 3.31 2.78 12 x 3 7.8

730MT5315125 x 40 50.8 54.0 6.3 117.6 206.5 90.4 101.6 85.6 M16 x 121 3.5

139.7mm/5 x 1- 12 2.00 2.13 1417.6 4.63 8.13 3.56 4.00 3.37 5

8 x 4- 34 7.8

730MT5320125 x 50 63.5 66.7 9.9 117.6 206.5 103.1 98.6 85.6 M16 x 121 3.5

139.7mm/5 x 2 2.50 2.63 2215.1 4.63 8.13 4.06 3.88 3.37 58 x 4- 3

4 7.8

730MT5326125 x 65 69.9 73.0 15.7 120.7 206.5 111.3 98.6 85.6 M16 x 121 4.0

139.7mm/5 x 76.1mm 2.75 2.88 3534.3 4.75 8.13 4.38 3.88 3.37 – 8.9

730MT5330125 x 80 88.9 92.1 21.4 127.0 206.5 130.3 103.1 85.6 M16 x 121 5.8

139.7mm/5 x 3 3.50 3.63 4810.6 5.00 8.13 5.13 4.06 3.37 58 x 4- 3

4 12.7

730MT6212150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 108.0 99.1 M16 x 121 3.5

165.1mm x 1- 14 2.00 2.13 1082.1 5.13 9.25 3.56 4.25 3.90 – 7.7




BC

HoleDia.

A

E

D

Takeout


OUTLET FITTINGS

Outlet

Fittings

87

Part Number


DNIn.


End LoadkN

Lbs.


Approx. Weight

kgLbs.

Min.mmIn.

Max.mmIn.

A B C D E

730AT6215150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 102.6 99.1 M16 x 121 3.5

165.1mm x 1- 12 2.00 2.13 1417.6 5.13 9.25 3.56 4.04 3.90 – 7.7

730AT6220150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 109.5 99.1 M16 x 121 3.7

165.1mm x 2 2.50 2.63 2215.1 5.13 9.25 4.06 4.31 3.90 – 8.2

730AT6226150 x 65 69.9 73.0 15.7 130.3 235.0 111.3 106.2 99.1 M16 x 121 4.1

165.1mm x 76.1mm 2.75 2.88 3584.3 5.13 9.25 4.38 4.18 3.90 – 9.0

730AT6230150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 111.0 99.1 M16 x 121 4.8

165.1mm x 3 3.50 3.63 4810.6 5.50 9.25 5.13 4.37 3.90 – 10.5

730MT6312150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 108.0 99.1 M16 x 121 3.46 x 1- 1

4 2.00 2.13 1082.1 5.13 9.25 3.56 4.25 3.90 58 x 4- 3

4 7.5

730AT6315150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 102.6 99.1 M16 x 121 3.46 x 1- 1

2 2.00 2.13 1417.6 5.13 9.25 3.56 4.04 3.90 58 x 4- 3

4 7.5

730AT6320150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 109.5 99.1 M16 x 121 3.5

6 x 2 2.50 2.63 2215.1 5.13 9.25 4.06 4.31 3.90 58 x 4- 3

4 7.7

730AT6326150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 106.2 99.1 M16 x 121 4.0

6 x 76.1mm 2.75 2.88 3245.9 5.13 9.25 4.38 4.18 3.90 58 x 4- 3

4 8.9

730AT6330150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 111.0 99.1 M16 x 121 4.7

6 x 3 3.50 3.63 4810.6 5.50 9.25 5.13 4.37 3.90 58 x 4- 3

4 10.3

730AT8020200 x 50 69.9 73.0 14.4 158.8 317.5 103.1 130.0 124.5 M20 x 121 5.5

8 x 2 2.75 2.88 3245.9 6.25 12.50 4.06 5.12 4.90 34 x 4- 3

4 12.1

730AT8026200 x 65 69.9 73.0 15.7 158.8 317.5 111.3 130.0 124.5 M20 x 121 5.7

8 x 76.1mm 2.75 2.88 3534.3 6.25 12.50 4.38 5.12 4.90 – 12.6

730AT8030200 x 80 88.9 92.1 21.4 165.1 317.5 130.3 136.4 124.5 M20 x 121 6.1

8 x 3 3.50 3.63 4810.6 6.50 12.50 5.13 5.37 4.90 34 x 4- 3

4 13.6

= 1 for red paint finish, 2 for hot dipped galvanised finish† Proper hole preparation is required for effective sealing and performance. Check the pipe seal surface within 15.9mm ( 5⁄8") of the hole

to ensure it is free from conditions affecting proper gasket sealing. Remove any sharp or rough edges from the hole or upper housing contact area that might affect assembly, proper seating of the locating collar, or flow from the outlet. For crosses, ensure double outlet holes are aligned on opposite sides of the pipe. The use of threaded products other than steel pipe, such as dry pendent sprinklers, may not be compatible with the female threaded outlet on the Mechanical Tee. Always confirm compatibility by contacting a GRINNELL Sales Representative.

‡ Maximum pressures and end loads are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.

Threads are BSP. Some size outlets are available with NPT threads. Contact a GRINNELL Sales Representative for details. For information on alternative sizes, contact a GRINNELL Sales Representative.See page 84 for mechanical tee specifications, and see pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.




BC

HoleDia.

A

E

D

Takeout

www.grinnell.com

OUTLET FITTINGS

Outlet

Fittings


Figure 730 Branch Outlet with Grooved Branch(Tee Configuration)

HoleDia.

A

D

BC

Figure 730 Mechanical Tees – Grooved(Page 1 of 3)


Part Number


DNIn.

Hole Dia.† Max.‡ End Load Branch

kNLbs.

Dimensions - mm In. BoltSize mmIn.

Approx. Weight

kgLbs.

Min.mmIn.

Max.mmIn.

A B C D

730AG201250 x 32 44.5 47.6 4.8 70.6 124.0 84.3 40.4 M10 x 57 1.12 x 1- 1

4 1.75 1.88 1082.1 2.78 4.88 3.32 1.59 38 x 2- 1

4 2.5

730AG201550 x 40 44.5 47.6 6.3 66.5 124.0 84.3 40.4 M10 x 57 1.12 x 1- 1

2 1.75 1.88 1417.6 2.62 4.88 3.32 1.59 38 x 2- 1

4 2.4

730AG251265 x 32 50.8 54.0 4.8 76.2 133.4 90.4 46.0 M10 x 57 1.1

2- 12 x 1- 1

4 2.00 2.13 1082.1 3.00 5.25 3.56 1.81 38 x 2- 1

4 2.5

730MG252065 x 50 50.8 54.0 9.9 81.0 133.4 101.6 46.0 M10 x 57 1.1

2- 12 x 2 2.00 2.13 2215.1 3.19 5.25 4.00 1.81 3

8 x 2- 14 2.5

730MG261265 x 32 50.8 54.0 4.8 77.7 142.7 90.4 47.5 M10 x 57 1.1

76.1mm x 1- 14 2.00 2.13 1082.1 3.06 5.62 3.56 1.87 – 2.5

730MG261565 x 40 50.8 54.0 6.3 79.5 142.7 90.4 47.5 M10 x 57 1.1

76.1mm x 1- 12 2.00 2.13 1417.6 3.13 5.62 3.56 1.87 – 2.5

730MG262065 x 50 50.8 54.0 9.9 82.6 142.7 101.6 47.5 M10 x 57 1.1

76.1mm x 2 2.00 2.13 2215.1 3.25 5.62 4.00 1.87 – 2.5

730MG301280 x 32 44.5 47.6 4.8 84.8 155.7 84.3 56.1 M12 x 89 1.63 x 1- 1

4 1.75 1.88 1082.1 3.34 6.13 3.32 2.21 12 x 3 3.5

730MG301580 x 40 50.8 54.0 6.3 85.9 155.7 90.4 56.1 M12 x 89 1.63 x 1- 1

2 2.00 2.13 1417.6 3.38 6.13 3.56 2.21 12 x 3 3.6

730MG302080 x 50 63.5 66.7 9.9 88.9 155.7 103.9 56.1 M12 x 89 2.03 x 2 2.50 2.63 2215.1 3.50 6.13 4.09 2.21 1

2 x 3 4.5

730AG4212100 x 32 44.5 47.6 4.8 99.6 181.1 84.3 70.6 M12 x 89 2.24 x 1- 1

4 1.75 1.88 1082.1 3.92 7.13 3.32 2.78 12 x 3 4.8

730AG4215100 x 40 50.8 54.0 6.3 101.6 181.1 90.4 70.6 M12 x 89 2.34 x 1- 1

2 2.00 2.13 1417.6 4.00 7.13 3.56 2.78 12 x 3 5.0

730MG4220100 x 50 63.5 66.7 9.9 101.6 181.1 103.1 70.6 M12 x 89 2.4

4 x 2 2.50 2.63 2215.1 4.00 7.13 4.06 2.78 12 x 3 5.3

730MG4225100 x 65 69.9 73.0 14.4 101.6 181.1 111.3 70.6 M12 x 89 2.74 x 2- 1

2 2.75 2.88 3245.9 4.00 7.13 4.38 2.78 12 x 3 5.9

730MG4226100 x 65 69.9 73.0 15.7 101.6 181.1 111.3 70.6 M12 x 89 2.7

4 x 76.1mm 2.75 2.88 3534.3 4.00 7.13 4.38 2.78 – 5.9

730MG4230100 x 80 88.9 92.1 21.4 104.9 181.1 130.3 70.6 M12 x 89 3.4

4 x 3 3.50 3.63 4810.6 4.13 7.13 5.13 2.78 12 x 3 7.4

730MG5315125 x 40 50.8 54.0 6.3 117.6 206.5 90.4 85.6 M16 x 121 3.5

139.7mm/5 x 1- 12 2.00 2.13 1417.6 4.63 8.13 3.56 3.37 5

8 x 4- 34 7.7


OUTLET FITTINGS

Outlet

Fittings

89




HoleDia.

A

D

BC

Part Number


DNIn.


kNLbs.


Approx. Weight

kgLbs.

Min.mmIn.

Max.mmIn.

A B C D

730MG5320125 x 50 63.5 66.7 9.9 117.6 206.5 103.1 85.6 M16 x 121 3.4

139.7mm/5 x 2 2.50 2.63 2215.1 4.63 8.13 4.06 3.37 58 x 4- 3

4 7.6

730MG5325125 x 65 69.9 73.0 14.4 120.7 206.5 111.3 85.6 M16 x 121 3.9

139.7mm/5 x 2- 12 2.75 2.88 3245.9 4.75 8.13 4.38 3.37 5

8 x 4- 34 8.6

730MG5326125 x 65 69.9 73.0 15.7 120.7 206.5 111.3 85.6 M16 x 121 3.9

139.7mm/5 x 76.1mm 2.75 2.88 3534.3 4.75 8.13 4.38 3.37 – 8.6

730MG5330125 x 80 88.9 92.1 21.4 127.0 206.5 130.3 85.6 M16 x 121 5.6

139.7mm/5 x 3 3.50 3.63 4810.6 5.00 8.13 5.13 3.37 58 x 4- 3

4 12.3

730MG6212150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 99.1 M16 x 121 3.5

165.1mm x 1- 14 2.00 2.13 1082.1 5.13 9.25 3.56 3.90 – 7.7

730MG6215150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 99.1 M16 x 121 3.4

165.1mm x 1- 12 2.00 2.13 1417.6 5.13 9.25 3.56 3.90 – 7.6

730AG6220150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 99.1 M16 x 121 3.6

165.1mm x 2 2.50 2.63 2215.1 5.13 9.25 4.06 3.90 – 8.0

730AG6225150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 99.1 M16 x 121 4.0

165.1mm x 2- 12 2.75 2.88 3245.9 5.13 9.25 4.38 3.90 – 8.8

730AG6226150 x 65 69.9 73.0 15.7 130.3 235.0 111.3 99.1 M16 x 121 4.0

165.1mm x 76.1mm 2.75 2.88 3534.3 5.13 9.25 4.38 3.90 – 8.8

730AG6242150 x 100 114.3 117.5 35.4 136.7 235.0 155.7 99.1 M16 x 121 5.3

165.1mm x 4 4.50 4.63 7952.2 5.38 9.25 6.13 3.90 – 11.6

730MG6312150 x 32 50.8 54.0 4.8 130.3 235.0 90.4 99.1 M16 x 121 3.56 x 1- 1

4 2.00 2.13 1082.1 5.13 9.25 3.56 3.90 58 x 4- 3

4 7.7

730AG6315150 x 40 50.8 54.0 6.3 130.3 235.0 90.4 99.1 M16 x 121 3.46 x 1- 1

2 2.00 2.13 1417.6 5.13 9.25 3.56 3.90 58 x 4- 3

4 7.6

730AG6320150 x 50 63.5 66.7 9.9 130.3 235.0 103.1 99.1 M16 x 121 3.6

6 x 2 2.50 2.63 2215.1 5.13 9.25 4.06 3.90 58 x 4- 3

4 8.0

730AG6325150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 99.1 M16 x 121 4.06 x 2- 1

2 2.75 2.88 3245.9 5.13 9.25 4.38 3.90 58 x 4- 3

4 8.8

730AG6326150 x 65 69.9 73.0 14.4 130.3 235.0 111.3 99.1 M16 x 121 4.0

6 x 76.1mm 2.75 2.88 3245.9 5.13 9.25 4.38 3.90 58 x 4- 3

4 8.8

730AG6330150 x 80 88.9 92.1 21.4 139.7 235.0 130.3 99.1 M16 x 121 4.6

6 x 3 3.50 3.63 4810.6 5.50 9.25 5.13 3.90 58 x 4- 3

4 10.1

730AG6342150 x 100 114.3 117.5 35.4 136.7 235.0 155.7 99.1 M16 x 121 5.3

6 x 4 4.50 4.63 7952.2 5.38 9.25 6.13 3.90 58 x 4- 3

4 11.6

www.grinnell.com

OUTLET FITTINGS

Outlet

Fittings


Part Number


DNIn.


kNLbs.


Approx. Weight

kgLbs.

Min.mmIn.

Max.mmIn.

A B C D

730AG8020200 x 50 69.9 73.0 9.9 158.8 317.5 111.3 124.5 M20 x 121 5.5

8 x 2 2.75 2.88 2215.1 6.25 12.50 4.38 4.90 34 x 4- 3

4 12.1

730AG8025200 x 65 69.9 73.0 14.4 158.8 317.5 111.3 124.5 M20 x 121 5.68 x 2- 1

2 2.75 2.88 3245.9 6.25 12.50 4.38 4.90 34 x 4- 3

4 12.3

730AG8026200 x 65 69.9 73.0 15.7 158.8 317.5 111.3 124.5 M20 x 121 5.6

8 x 76.1mm 2.75 2.88 3534.3 6.25 12.50 4.38 4.90 – 12.3

730AG8030200 x 80 88.9 92.1 21.4 165.1 317.5 130.3 124.5 M20 x 121 6.0

8 x 3 3.50 3.63 4810.6 6.50 12.50 5.13 4.90 34 x 4- 3

4 13.2

730AG8042200 x 100 114.3 117.5 35.4 162.1 317.5 155.7 124.5 M20 x 121 6.7

8 x 4 4.50 4.63 7952.2 6.38 12.50 6.13 4.90 34 x 4- 3

4 14.7

= 1 for red paint finish, 2 for hot dipped galvanised finish♦ Contact a GRINNELL Sales Representative for dimension details.† Proper hole preparation is required for effective sealing and performance. Check the pipe seal surface within 15.9mm ( 5⁄8") of the hole

to ensure it is free from conditions affecting proper gasket sealing. Remove any sharp or rough edges from the hole or upper housing contact area that might affect assembly, proper seating of the locating collar, or flow from the outlet. For crosses, ensure double outlet holes are aligned on opposite sides of the pipe.

‡ Maximum pressures and end loads are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 84 for mechanical tee specifications, and see pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.




HoleDia.

A

D

BC

VALVES & ACCESSORIES

91

92 www.grinnell.com


Valves &

Accessories

GRINNELL reserves the right to change the contents without notice.

Valves & Accessories Table of Contents


Figure 39101 & 39107

Grooved Butterfly Valves Flow Data

Page 93

Figure 39101HV Butterfly Valves

10 Position Handle Lever Operated for HVAC Applications

Page 94

Figure 39101 Butterfly Valve,

Lever Operated for Potable Water Applications

Page 95

Figure 39101N Butterfly Valves,

Lever Operated with Nitrile DiscPage 96

Figure 39107 Butterfly Valves

Gear Operated for Potable Water Applications

Page 97

Figure SJ-200 Low Profile

Butterfly ValvesPage 98

Model B8101Low Profile

Butterfly ValvesPage 99

Figure B333Large Diameter Butterfly Valve

Page 100 - 101

Model BV835Ball Valves

Pages 102 - 103

Model SJ-500LBall ValvePages 104

Model SJ-500WBall Valve

Gear OperatedPages 105

Model SJ-530Ball Valve (3 Port)

Pages 106

Model CV-1Grooved End Check Valves

Pages 107 - 108

Model SJ-915Dual Disk Check Valves

65 - 300mm (21⁄2-12")

Page 109

Model SJ-915Dual Disk Check Valves 350 - 600mm (14" - 24")

Page 110

Model CB800Balancing Valves

OverviewPage 111

Model CB800Threaded

Balancing ValvesPage 112

Model CB800Grooved

Balancing ValvesPage 113

Model CB800Flanged

Balancing Valves ANSI & PN16/PN10

Page 114 - 115Model CB800

Solder Balancing Valves

Page 116Model CB800Circuit Balancing

Insulation KitsPage 117

Model CB800Circuit Balancing Valves

MC2 Measuring ComputerPage 117

Figure 70607Groove Ended

Metering StationPage 118

Figure VenturiFlow Meter Butt Weld with Grooved Ends

Page 119

Figure 760WYE Strainer

Page 120

Figure S855Tee StrainerPage 121

Figure S810Suction DiffusersPages 122 - 123

Figure 7550Expansion JointsPages 124 - 129

Figure RXAGExpansion Joint

Page 130

Figure ALGExpansion Joint

Page 131

Figure ANSExpansion Joint

Page 132

Figure FTURubber Bellows

ISO R7 ThreadedPage 132

Figure FSFFlanged Rubber Bellows

Page 133

Figure UFBXFlexible Hoses

Pages 134 - 135

Figure HERCULESFix PointPage 136

Figure FAZAnchor

Page 137

Figures 407GT & 407T

Dielectric WaterwaysPage 138


Refer to back cover for country-specific contact information 93


Valves &

Accessories

Flow Characteristics Kv values in L/min (UK-GMP & US-GPM) For Figures 39101 and 39107 Butterfly Valves

DN Size UOM 20°C (68°F)

30°C (86°F)

40°C (104°F)

50°C (122°F)

60°C (140°F)

70°C (158°F)

80°C (176°F)

90°C (194°F)

50 60.3 L/min 57 135 315 628 1100 1643 1767 1850

2 2.375UK-GPM 13 30 69 138 242 361 389 407US-GPM 15 36 83 166 291 434 467 489

65 73.0 L/min 82 200 457 885 1600 2300 2600 2717

2- 12 2.875

UK-GPM 18 44 101 195 352 506 572 598US-GPM 22 53 121 234 423 608 687 718

65 76.1 L/min 82 200 457 885 1600 2300 2600 2717

76.1mm 3.000UK-GPM 18 44 101 195 352 506 572 598US-GPM 22 53 121 234 423 608 687 718

80 88.9 L/min 128 315 657 1315 2400 3500 4050 4150

3 3.500UK-GPM 28 69 145 289 528 770 891 913US-GPM 34 83 174 347 634 925 1,070 1,096

100 114.3 L/min 215 500 1085 2150 3767 6283 8133 8567

4 4.500UK-GPM 47 110 239 473 829 1,382 1,789 1,885US-GPM 57 132 287 568 995 1,660 2,149 2,263

125 139.7 L/min 415 915 1850 3417 6033 9433 12750 13717

139.7mm 5.500UK-GPM 91 201 407 752 1,327 2,075 2,805 3,017US-GPM 110 242 489 903 1,594 2,492 3,369 3,624

125 141.3 L/min 415 915 1850 3417 6033 9433 12750 13717

5 5.563UK-GPM 91 201 407 752 1,327 2,075 2,805 3,017US-GPM 110 242 489 903 1,594 2,492 3,369 3,624

150 165.1 L/min 628 1400 3067 6150 10567 16067 19933 21433

165.1mm 6.500UK-GPM 138 308 675 1,353 2,324 3,534 4,385 4,715US-GPM 166 370 810 1,625 2,792 4,245 5,266 5,663

150 168.3 L/min 628 1400 3067 6150 10567 16067 19933 21433

6 6.625UK-GPM 138 308 675 1,353 2,324 3,534 4,385 4,715US-GPM 166 370 810 1,625 2,792 4,245 5,266 5,663

200 219.1 L/min 1172 2750 5650 11283 20500 33367 47500 52150

8 8.625UK-GPM 258 605 1,243 2,482 4,509 7,340 10,449 11,472US-GPM 310 727 1,493 2,981 5,416 8,816 12,550 13,778

250 273.0 L/min 2000 5717 12217 20717 36650 56067 77350 81433

10 10.750UK-GPM 440 1,258 2,687 4,557 8,062 12,333 17,015 17,913US-GPM 528 1,510 3,228 5,473 9,683 14,813 20,436 21,515

300 323.9 L/min 3067 8717 18567 31717 55933 93217 118000 124283

12 12.750UK-GPM 675 1,918 4,084 6,977 12,304 20,505 25,957 27,339US-GPM 810 2,303 4,905 8,380 14,778 24,628 31,176 32,836

The relation between Cv and Kv is different for UK and US: (UK) Cv = 0.97Kv and (US) Cv = 1.17Kv,

The imperial (UK) gallon is officially defined as 4.546 liters.

The imperial (US) gallon is officially defined as 3.785 liters.

The uniqueness of the grooved valve begins with the spherical bore of the disc seat area which facilitates a constant disc to seat loading that maintains a leak tight stem seal regardless of disc position. Because seal force is constant throughout the full disc cycle, operating torques are kept low thus increasing valve life.

The grooved butterfly valve is the grooved end valve with the lowest pressure loss. This is accomplished by combining the best features of ball valve and butterfly designs. Utilizing the spherical bore of a ball valve design enables the use of a thin profile disc with much narrower leading edges which, while providing a bubble tight seal affords the advantage of minimal flow turbulence through the valve. This reduces pressure loss and allows more precise flow control over a wider range of flow conditions and disc positions.

Also designed with the contractor in mind, the valve body is a rugged one-piece casting with integral mounting base for either manual operated or remote controlled actuation while providing room for vital pipe system insulation.

Figures 39101 & 39107 Grooved Butterfly Valve Flow Characteristics

94 www.grinnell.com


Valves &

Accessories


Part Number

Pipe SizeMax. WkPressure

Barpsi

Dimensions - mm Inches

Lever Type

ApproxWeight

Kg.Lbs.

Nominalmm

Inches

O.D.mm

InchesA B C D E F

39101HV06050 60.3 16 100 77.5 81 230 69 45

LC 41.9

2 2.375 230 3.94 3.05 3.19 9.06 2.72 1.77 4.2

39101HV07365 73.0 16 105 82 97 230 69 45

LC 42.9

2 12 2.875 230 4.13 3.23 3.82 9.06 2.72 1.77 6.4

39101HV07665 76.1 16 105 82 97 230 69 45

LC 42.9

76,1mm 3.000 230 4.13 3.23 3.82 9.06 2.72 1.77 6.4

39101HV08980 88.9 16 112 90 97 230 69 45

LC 43.4

3 3.500 230 4.41 3.54 3.82 9.06 2.72 1.77 7.5

39101HV114100 114.3 16 135 107 116 320 77 50

LC 125.3

4 4.500 230 5.31 4.21 4.57 12.60 3.03 1.97 11.7

39101HV139125 139.7 16 147 121 148 320 77 50

LC 128.5

139,7mm 5.500 230 5.79 4.76 5.83 12.60 3.03 1.97 18.7

39101HV141125 141.3 16 147 121 148 320 77 50

LC 128.5

5 5.563 230 5.79 4.76 5.83 12.60 3.03 1.97 18.7

39101HV165150 165.1 16 180 150 148 420 77 50

LC 2012.1

165,1mm 6.500 230 7.09 5.91 5.83 16.54 3.03 1.97 26.7

39101HV168150 168.3 16 180 150 148 420 77 50

LC 2012.1

6 6.625 230 7.09 5.91 5.83 16.54 3.03 1.97 26.7

39101HV219200 219.1 16 204 172 133 420 77 50

LC 2014.7

8 8.625 230 8.03 6.77 5.24 16.54 3.03 1.97 32.4

Note: maximum working temperature 110°C (230°F )Recommended for mounting with GRINNELL Rigid Couplings.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

MATERIAL SPECIFICATIONSBody

Disc

Control Shaft & Spindle

Retainer Plug

O-Ring

Locking Ring

Performance

Figure 39101HV Butterfly Valve, 10 Position Handle Lever Operated for HVAC Applications

D

E

C

B

A

F



Valves &

Accessories

Part Number


Barpsi


Lever Type

ApproxWeight

Kg.Lbs.

Nominalmm

Inches

O.D.mm

InchesA B C D E F

39101-06050 60.3 16 100 77.5 81 230 70 45

LC 41.9

2 2.375 230 3.94 3.05 3.19 9.06 2.76 1.77 4.2

39101-07365 73.0 16 105 82 97 230 70 45

LC 42.9

2 12 2.875 230 4.13 3.23 3.82 9.06 2.76 1.77 6.4

39101-07665 76.1 16 105 82 97 230 70 45

LC 42.9

76,1mm 3.000 230 4.13 3.23 3.82 9.06 2.76 1.77 6.4

39101-08980 88.9 16 112 90 97 230 70 45

LC 43.4

3 3.500 230 4.41 3.54 3.82 9.06 2.76 1.77 7.5

39101-114100 114.3 16 135 107 116 320 76 50

LC 125.3

4 4.500 230 5.31 4.21 4.57 12.60 2.99 1.97 11.7

39101-139125 139.7 16 147 121 148 320 76 50

LC 128.5

139,7mm 5.500 230 5.79 4.76 5.83 12.60 2.99 1.97 18.7

39101-141125 141.3 16 147 121 148 320 76 50

LC 128.5

5 5.563 230 5.79 4.76 5.83 12.60 2.99 1.97 18.7

39101-165150 165.1 16 180 150 148 420 76 50

LC 2012.1

165,1mm 6.500 230 7.09 5.91 5.83 16.54 2.99 1.97 26.7

39101-168150 168.3 16 180 150 148 420 76 50

LC 2012.1

6 6.625 230 7.09 5.91 5.83 16.54 2.99 1.97 26.7

39101-219200 219.1 16 204 172 133 420 76 50

LC 2014.7

8 8.625 230 8.03 6.77 5.24 16.54 2.99 1.97 32.4

Note: recommended for mounting with GRINNELL Rigid couplings Working temperature range is -15°C to 80°C (5°F to 176°F )Option: silicon free valves for automotive industry. Because of the special grease, the agency approvals do not apply.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Disc


Bushing

Retainer Plug

O-Ring

Locking Ring

Performance

Figure 39101 Butterfly Valve, Lever Operated for Potable Water Applications

D

E

C

B

A

F

96 www.grinnell.com


Valves &

Accessories


Figure 39101N Butterfly Valves, Lever Operated with Nitrile Disc

Part Number


Barpsi


Lever Type

ApproxWeight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C D E F

39101N-06050 60.3 16 100 77.5 81 230 70 45

LC 41.9

2 2.375 230 3.94 3.05 3.19 9.06 2.76 1.77 4.2

39101N-07365 73.0 16 105 82 97 230 70 45

LC 42.9

2 12 2.875 230 4.13 3.23 3.82 9.06 2.76 1.77 6.4

39101N-07665 76.1 16 105 82 97 230 70 45

LC 42.9

76,1mm 3.000 230 4.13 3.23 3.82 9.06 2.76 1.77 6.4

39101N-08980 88.9 16 112 90 97 230 70 45

LC 43.4

3 3.500 230 4.41 3.54 3.82 9.06 2.76 1.77 7.5

39101N-114100 114.3 16 135 107 116 320 76 50

LC 125.3

4 4.500 230 5.31 4.21 4.57 12.60 2.99 1.97 11.7

39101N-139125 139.7 16 147 121 148 320 76 50

LC 128.5

139,7mm 5.500 230 5.79 4.76 5.83 12.60 2.99 1.97 18.7

39101N-141125 141.3 16 147 121 148 320 76 50

LC 128.5

5 5.563 230 5.79 4.76 5.83 12.60 2.99 1.97 18.7

39101N-165150 165.1 16 180 150 148 420 76 50

LC 2012.1

165,1mm 6.500 230 7.09 5.91 5.83 16.54 2.99 1.97 26.7

39101N-168150 168.3 16 180 150 148 420 76 50

LC 2012.1

6 6.625 230 7.09 5.91 5.83 16.54 2.99 1.97 26.7

39101N-219200 219.1 16 204 172 133 420 76 50

LC 2014.7

8 8.625 230 8.03 6.77 5.24 16.54 2.99 1.97 32.4

Note: recommended for mounting with GRINNELL Rigid couplings Working temperature range is -15°C to 80°C (5°F to 176°F )For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Disc


Bushing

Retainer Plug

O-Ring

Locking Ring

Performance

D

E

C

B

A

F



Valves &

Accessories

Figure 39107 Butterfly Valves, Gear Operated for Potable Water Applications

Part Number

Pipe Size Max. Work

PressureBarpsi

Dimensions - mm InchesApproxWeight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C E G K L M N P øV

39107-08980 88.9 16.0 112 90 97 137 72 53 185 55 45 172 150 7.43 3.500 230 4.41 3.54 3.82 5.39 2.83 2.09 7.28 2.17 1.77 6.77 5.91 16.3

39107-114100 114.3 16.0 135 107 116 170 101 79 228 77 67 216 300 15.04 4.500 230 5.31 4.21 4.57 6.69 3.98 3.11 8.98 3.03 2.64 8.50 11.81 33.1

39107-139125 139.7 16.0 147 121 148 182 101 79 228 77 67 228 300 18.3

139,7mm 5.500 230 5.79 4.76 5.83 7.17 3.98 3.11 8.98 3.03 2.64 8.98 11.81 40.3

39107-141125 141.3 16.0 147 121 148 182 101 79 228 77 67 228 300 18.55 5.563 230 5.79 4.76 5.83 7.17 3.98 3.11 8.98 3.03 2.64 8.98 11.81 40.8

39107-165150 165.1 16.0 180 150 148 215 101 79 228 77 67 261 300 21.4

165,1mm 6.500 230 7.09 5.91 5.83 8.46 3.98 3.11 8.98 3.03 2.64 10.28 11.81 47.2

39107-168150 168.3 16.0 180 150 148 215 101 79 228 77 67 261 300 21.76 6.625 230 7.09 5.91 5.83 8.46 3.98 3.11 8.98 3.03 2.64 10.28 11.81 47.8

39107-219200 219.1 16.0 204 172 133 239 101 79 228 77 67 285 300 24.08 8.625 230 8.03 6.77 5.24 9.41 3.98 3.11 8.98 3.03 2.64 11.22 11.81 52.9

39107-273250 273.0 12.7 250 233 159 288 118 82 228 79 80 332 300 40.010 10.750 175 9.84 9.17 6.26 11.34 4.65 3.23 8.98 3.11 3.15 13.07 11.81 88.2

39107-324300 323.9 12.7 275 258 165 313 118 82 228 79 80 357 300 49.012 12.750 175 10.83 10.16 6.50 12.32 4.65 3.23 8.98 3.11 3.15 14.06 11.81 108.0

Note: recommended for mounting with GRINNELL Rigid couplings Working temperature range is -15°C to 80°C (5°F to 176°F)For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Disc


Bushing

Retainer Plug

O-Ring

Locking Ring

Performance

E ØV

BAL

PG M

NC

ØD

K

98 www.grinnell.com


Valves &

Accessories


Shurjoint Figure SJ-200 Low Profile Butterfly ValveShurjoint Tech Data Sheet: J-35

Not Recommended for Steam.

H

A

B

C

O.D.

The Shurjoint Model SJ-200 Butterfly Valve is a low profile, grooved-end butterfly valve designed for oil & gas, mining and other service applications. The working pressure is rated up to 16 Bar (232 psi) and service temperatures are rated to 82°C (180°F) (Nitrile body liner).

The Model SJ-200 features a fully rubber lined body with 316 stainless steel disc. This makes the SJ-200 great for mining, oil and gas applications due to its superior abrasive and corrosion resistance.

The end to end dimensions conform to MSS SP-67. The lever handle is equipped with a tamper resistant locking device.


Pipe Size Dimensions - mm Inches Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C H

50 60.3 81.0 48 57 140 0.92 2.375 3.19 1.89 2.25 5.51 2.0

65 73.0 97.0 54 67 190 1.52 1

2 2.875 3.82 2.13 2.65 7.48 3.3

80 88.9 97.0 62 75 190 1.93 3.500 3.82 2.44 2.94 7.48 4.2

100 114.3 116.0 76 106 274 3.94 4.500 4.57 3.00 4.17 10.79 8.6

150 168.3 148.0 104 139 274 10.16 6.625 5.83 4.04 5.47 10.79 22.2

200 219.1 133.0 140 152 274 11.38 8.625 5.25 5.50 6.00 10.79 27.9

Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.

For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Nom. Rating Working Pressure Shell Test Max. Service

Temperature

CWP 16 Bar @38°C232 psi @100°F

24 Bar350 psi



*Working pressure is based on connection with roll- or cut-grooved standard wall carbon steel pipe.

*Seat test: 110% the working pressure.

MATERIAL SPECIFICATIONS Valve Body:

ASTM A 395, Gr. 65-15-45, min tensile strength 4481 Bar (65,000 psi).

Disc:

Valve Body Coating:

Valve Body Liner: (colour code: Orange stripe)

Recommended for petroleum products, vegetable oils, mineral oils and air with oil vapors. Temperature range: -29°C to 82°C (-20°F to 180°F ). Do not use for HOT WATER above 66°C (150°F ) or HOT DRY AIR above 60°C (140°F ).

Upper & Lower Shafts:

O-Ring:

Nut:

Lever Handle:

Performance

Representative.



Valves &

Accessories

Model B8101 Low Profile Butterfly ValvesTech Data Sheet: G330

The GRINNELL Model B8101 Low Profile Butterfly Valve has a rated working pressure of 13.8 Bar (200 psi) and provides efficient control of fluid in piping systems. Flow can be from either direction and the valve may be positioned in any orientation. The ductile iron body is epoxy-coated to resist atmospheric corrosion. The disc is EPDM encapsulated ductile iron compatible with a variety of chemicals and temperature ranges.


Body Coating

Disc

Disc Seal encapsulated rubber

-29°C to 121°C (-20°F to 250°F ) with intermittent service at 121°C (250°F ) and continuous service at 107°C (225°F )

encapsulated rubber -29°C to 82°C (-20°F to 180°F )

Stem

Stem Seal

Handle

Performance

Representative.


Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C D E F

50 60.3 86.0 152.0 25.0 46.0 50.0 80.0 1.92 2.375 3.39 5.98 0.98 1.81 1.97 3.15 4.2

65 73.0 96.0 152.0 25.0 52.0 61.0 91.0 2.92 1

2 2.875 3.78 5.98 0.98 2.05 2.40 3.58 6.4

80 88.9 96.0 210.0 25.0 65.0 67.0 107.0 3.43 3.500 3.78 8.27 0.98 2.56 2.64 4.21 7.5

100 114.3 115.0 210.0 25.0 83.0 83.0 123.0 5.34 4.500 4.53 8.27 0.98 3.27 3.27 4.84 11.7

125 141.3 139.7 311.2 32.0 101.6 101.6 171.5 5.85 5.563 5.50 12.25 1.26 4.00 4.00 6.75 12.7

150 168.3 132.0 305.0 32.0 109.0 109.0 174.0 12.16 6.625 5.20 12.01 1.26 4.29 4.29 6.85 26.6


A

B

F

D

C

E

100 www.grinnell.com


Valves &

Accessories


Figure B333 Large Diameter Butterfly Valve(Page 1 of 2)


MATERIAL SPECIFICATIONS Valve Body & Disc

12 and/or to ASTM A395 Gr. 65-45-15

Stem Seals

Body Coating

Disc Encapsulation

Upper and Lower Shafts

Gear Operator Housing

Set Screw

Spring Pin

Maximum Working Pressure(300 psi), non-shock cold water

Seat Material – For service temperatures from

-34°C to 93°C ( -30°F to 200°F). Recommended for water service, dilute acids, alkalies, oil-free air, and many chemical services. THEY ARE NOT RECOMMENDED FOR USE IN PETROLEUM SERVICES.

– For service temperatures from -29°C to 82°C ( -20°F to 180°F). Recommended for petroleum products, air with oil vapors, vegetable oils, and mineral oils. THEY ARE NOT RECOMMENDED FOR USE IN HOT WATER SERVICES.

Contact a GRINNELL Sales Representative for specific recommendations on seat material.

Performance

Representative.

The GRINNELL Model B333 Large Diameter Butterfly Valve provides efficient control of fluid flow in piping systems. It is a grooved-end bubble tight shut-off valve with end-to-end dimensions that meet MSS SP-67, Table 4 and a mounting pad that meets ISO 5211 for the mounting of power actuators. The valve is capable of bidirectional fluid flow at working pressures to 20 bar (300 psi) and may be positioned in any orientation.

The 350 to 600mm (14" to 24") Model B333 Butterfly Valve is configured with a worm type gear operator and consists of an epoxy powder coated ductile iron body and EPDM or Nitrile (NBR) rubber encapsulation dual-seal disc. The body and disc construction provides for increased strength and durability. The disc seal and body coating are compatible with a variety of chemicals and temperature ranges. Contact your GRINNELL Representative for specific recommendations on seal and coating selections.



Valves &

Accessories

A

F

D

B

C

E

O.D.

PCD

SK

Figure B333 Large Diameter Butterfly Valve(Page 2 of 2)


Nominal mm

Inches

PCDDia.mm

Inches

Dimensions Approx.Weight

Kg.Lbs.

Bolt Size K

mm

Smm

Inches350 125

M1224.0 14.9

14 4.90 0.94 32.8

400 140M16

36.6 14.916 5.50 1.44 32.8

450 140M16

41.3 14.918 5.50 1.625 32.8

500 165M20

52.0 30.520 6.50 2.04 67.1

600 165M20

52.0 30.524 6.50 2.04 67.1

For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15

or contact a GRINNELL Sales Representative.


Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C D E F

350 355.6 178 365 224 276 242 305 5914 14.000 7.00 14.37 8.82 10.86 9.50 12.00 130.0

400 406.4 178 416 248 302 242 305 6716 16.000 7.00 16.38 9.76 11.89 9.50 12.00 147.4

450 457.2 203 470 283 350 242 305 8618 18.000 8.00 18.50 11.14 13.78 9.50 12.00 189.2

500 508.0 216 527 314 383 290 412 13320 20.000 8.50 20.75 12.36 15.08 11.40 16.20 292.6

600 609.6 254 629 368 463 290 412 16024 24.000 10.00 24.76 14.49 17.83 11.40 16.20 353.0


Worm Gear Operator



Valves &

Accessories


Model BV835 Ball Valves(Page 1 of 2)

Tech Data Sheet: G380 GRINNELL Model BV835 Ball Valves provide for efficient control of fluid in piping systems. Flow may be from either direction, and the valves may be positioned in any orientation. The valves are furnished with grooved ends for use with GRINNELL Grooved Couplings. The handle is provided with a device for padlocking in either the open or closed position.

The GRINNELL Model BV835 is furnished with grooved ends and features a handle that accepts a padlock device for locking in either the open or closed position. Flow may be from either direction and the valves may be positioned in any orientation.

Pipe Size Dimensions - mm InchesCv

Value

Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C D

40 48.3 130 86 178 32130

2.21 1

2 1.900 5.12 3.39 7.00 1.25 4.8

50 60.3 140 95 178 38180

2.9 2 2.375 5.50 3.75 7.00 1.50 6.4

65 73.0 159 132 265 50320

4.8 2 1

2 2.875 6.25 5.20 10.43 2.00 10.6

80 88.9 167 143 265 63600

6.1 3 3.500 6.56 5.63 10.43 2.50 13.4

100 114.3 240 94 265 901020

25.04 4.500 9.45 3.70 10.43 3.50 55.0

150 168.3 258 221 600 1253300

36.06 6.625 10.15 8.70 23.60 4.92 79.2

* For the first opening or closing of the valve when the valve is not continuously operated, an additional torque of 2.0 – 2.5 times the listed operating torque is normally required.


Maximum Working Pressure68,9 Bar (1,000 psi) 50 – 80mm (1 1⁄2" – 3")55,2 Bar (800 psi) 100 - 150mm (4" - 6")

Shell Test1.5 times WOG x 60 seconds, hydrostatic, at ambient temperature

Seat Test5,5 Bar (80 psi) x 60 seconds, pneumatic

C

A

B

D


ASTM A 536, Grade 65-45-12

Body Coating

Ball

Body Seal

Seats

O-Ring

Stem

- Type 304 Stainless Steel availableLever Handle

- Type 304 Stainless Steel available

Gear Operator



Valves &

Accessories

Model BV835 Ball Valves(Page 2 of 2)


Pressure Performance

Flow Data - Cv Values


Value

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B C D E

40 48.3 130 124 203 32 152130

7.01 1

2 1.900 5.12 4.88 8 1.25 6 15.0

50 60.3 140 137 203 38 152180

8.02 2.375 5.50 5.38 8 1.50 6 18.0

65 73.0 159 145 203 50 152320

10.02 1

2 2.875 6.25 5.68 8 2.00 6 22.0

80 88.9 167 182 203 63 152600

14.03 3.500 6.56 7.16 8 2.50 6 31.0

100 114.3 240 203 203 90 1521020

33.04 4.500 9.45 8.00 8 3.50 6 73.0

150 168.3 258 277 356 125 3053300

56.06 6.625 10.15 10.89 14 4.92 12 123.4


00

2,000

4,000

6,000

8,000

10,000

50 100

Temperature (C°)

Pres

sure

(kPa

)

200 250

Values for flow of water at 16°C (60°F)

Cv =Q

Where: Cv = Flow coefficient Q = Flow (GPM) ΔP = Pressure drop (psi)

range of the gasket used in the coupling. For additional information, contact a GRINNELL Sales Representative.

Schedule 40 steel pipe with roll grooves to ANSI/AWWA C606-04 specifications. For information on other pipe schedules, contact a GRINNELL Sales Representative.

any components.

C

E

B

D

A



Valves &

Accessories


Shurjoint Model SJ-500L Ball Valve(Page 1 of 2)

Shurjoint Tech Data Sheet: J-06

Pipe Size Working Pressure

Barpsi

Operating

N / mLb/In

Dimensions - mm Inches Approx.Weight

Kg.Lbs.

Nominalmm

Inches

Pipemm

InchesL H W d A B C

40 48.3 70 7 130 86 178 32 15.9 7.9 45.1 1.81 1

2 1.900 1000 62 5.12 3.39 7.00 1.25 0.625 0.312 1.775 3.9

50 60.3 70 17 140 95 178 38 15.9 7.9 57.2 2.92 2.375 1000 150 5.50 3.75 7.00 1.50 0.625 0.312 2.250 6.4

65 73.0 70 21 159 132 265 50 15.9 7.9 69.1 4.42 1

2 2.875 1000 186 6.25 5.20 10.43 2.00 0.625 0.312 2.720 9.7

65 76.1 70 21 159 132 265 50 15.9 7.9 72.3 4.476,1mm 3.000 1000 186 6.25 5.20 10.43 2.00 0.625 0.312 2.845 9.7

80 88.9 70 28 167 143 265 63 15.9 7.9 84.9 7.83 3.500 1000 248 6.56 5.63 10.43 2.50 0.625 0.312 3.344 17.2

100 114.3 56 45 240 94 265 90 15.9 7.9 110.0 14.74 4.500 800 398 9.45 3.70 10.43 3.50 0.625 0.312 4.334 32.3

150 165.1 56 60 258 221 600 125 15.9 9.5 163.9 41.1165.1mm 6.500 800 531 10.15 8.70 23.60 4.92 0.625 0.374 6.453 90.2

150 168.3 56 60 258 221 600 125 15.9 9.5 163.9 41.16 6.625 800 531 10.15 8.70 23.60 4.92 0.625 0.374 6.453 90.2

* When first opening or closing the valve when not continuosly operated.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

The Shurjoint Model SJ-500L is a ductile iron, grooved-end, two-piece, regular port ball valve designed and tested in conformance with MSS SP-110 and SP-72. The lever handle is equipped with tamper resistant locking holes. The SJ-500L is comprised of a ductile iron body and end cap, virgin TFE seats and chrome-plated carbon steel trim. Also available with stainless steel trim as an option.


Nom. Rating

Sizemm

Inches

Working Pressure


CWP

40 - 80 70 Bar @ 38°C

EPDM: 110°C (230°F)Nitrile: 82°C (180°F)

1 12 - 3 1000 psi @100°F

100 - 150 56 Bar @ 38°C4 - 6 800 psi @100°F



H

d

BA

W

L

6"

CO.D.

W

L

H

11/2" - 4"

O.D.

d



Valves &

Accessories

Shurjoint Model SJ-500W Ball Valve Gear Operated

(Page 2 of 2)


150mm (6")

The Shurjoint Model SJ-500W can be equipped with a worm gear operator. The standard gear operator is supplied with a bracket and extension sleeve. The ISO 5211 mounting pad allows for the mounting of power actuators.

40 to 100mm (1 1⁄2" - 4")

Pipe Size Dimensions Approx.Weight

Kg.Lbs.

Nominalmm

Inches

Pipemm

Inches

Kmm

Inches

Hmm

Inches

Wmm

Inches40 48.3 152 124 203 7.0

1 12 1.900 6 4.88 8 15.4

50 60.3 152 137 203 8.02 2.375 6 5.38 8 17.665 73.0 152 145 203 10.0

2 12 2.875 6 5.68 8 22.0

65 76.1 152 145 203 10.076,1mm 3.000 6 5.68 8 22.0

80 88.9 152 182 203 14.03 3.500 6 7.16 8 30.8

100 114.3 152 203 203 33.04 4.500 6 8.00 8 72.6

150 165.1 305 277 356 56.0165,1mm 6.500 12 10.89 14 123.2

150 168.3 305 277 356 56.06 6.625 12 10.89 14 123.2



H

W

K

H

K

W

MATERIAL SPECIFICATIONS Body and End Cap:

ASTM A 395, Gr. 65-45-15.

Stem & Ball:

Seats:

Body Seal:

O-Ring:

Lever Handle:

Gear Operator:

Performance

Representative.



Valves &

Accessories


Shurjoint Model SJ-530 Ball Valve (3 Port)Shurjoint Tech Data Sheet: J-40


Pipe Size Dimensions Approx. Weight

Kg.Lbs.

Nominalmm

Inches

Pipemm

Inches

Lmm

Inches

Hmm

Inches

Wmm

Inches

dmm

Inches

Amm

Inches

Bmm

Inches50 60.3 167 110 228 38 83 79 3.582 2.375 6.55 4.32 8.96 1.50 3.25 3.13 7.89



Nom. Rating Working Pressure Max. Service

Temperature

CWP 41 Bar @38°C600 psi @100°F





W

H

A

L

O.D. d

B

The Shurjoint Model SJ-530 is a grooved-end three-port ball valve designed to divert media from bottom inlet to either of the two outlets ports. The valve port is a regular port size and the stem is a blowout proof design to MSS-SP-72 and API Standard 608. The valve is supplied with a carbon steel lever handle equipped with a tamper resistant locking device.

The valve body is made of ferritic ductile iron conforming to ASTM A 395/A (UNS F33100) with black electro deposition coating. The three-port ball is austenitic stainless steel to ASTM A 351 CF8M (316) and blowout proof stem is stainless steel to ASTM A 479 Type 316. All materials are chosen to meet the requirements of NACE MR0175-2003.

MATERIAL SPECIFICATIONS Body and End Cap:

Surface Finish:

Ball:

Stem:

Seats:

Body Seal:

Stem Hardware:

Lever Handle:

Performance

Representative.



Valves &

Accessories

Model CV-1 Grooved End Check Valves(Page 1 of 2)


SPECIFICATIONSValve Assembly Finish

Max Working Pressure

Clapper2" - 8") - Stainless Steel,

250mm (10") - Ductile iro

Valve Material SpecificationsItem No. Description Material Qty.

1 Body Ductile Iron 12 Cap Ductile Iron 13 Gasket Synthetic Fibre 14 Hex Cap Screw Steel, Zinc Plated AR5 Clapper Stainless Steel or Ductile Iron 16 Seal Facing EPDM Grade “E” 17 Spring Stainless Steel 18 Hinge Shaft Stainless Steel 19 Retaining Ring Stainless Steel AR10 Washer Teflon 211 Retention Bolt Stainless Steel 112 Seal Ring Neoprene 113 Retaining Disc Stainless Steel 114 Locknut Stainless Steel 115 Plug- 1⁄2"-14 NPT Cast Iron 216 Adhesive Thread Sealer AR17 Nameplate Aluminium 118 Rivet Steel 219 Spacer Stainless Steel 1

15

DETAIL BSEE

1

VIEW ASEE

1718

3

24,16

(2-1/2" - 8")2

9

8

7

5

(10")

8

92 7 5

13

14,16

6

13

11,16

19

5 6

5

11

12

VIEW A

DETAIL B

DN65-DN200

(2-1/2" - 8")DN65-DN200

DN250

(10")DN250

The GRINNELL Model CV-1 Grooved End Swing Check Valves are compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction. They are manufactured with a ductile iron body and a nickel-plated seat.

2" to 8") have a stainless steel clapper assembly.

10" to 12") have a ductile iron clapper assembly.

A resilient elastomer seal facing on the spring-loaded clapper ensures a leaktight seal and a non-sticking operation.

The Model CV-1 Check Valves are designed to minimize water hammer caused by flow reversal. The Model CV-1 Check Valve is furnished with grooved ends and can be installed using GRINNELL Grooved Couplings or Flanged Adapters. The Model CV-1 Check Valves have been designed with a removable cover for ease of field maintenance. These valves can be installed horizontally (with cover in the upward position) or vertically with the flow in the upward direction.

HORIZONTALORIENTATION

VERTICALORIENTATION

FLOW

FLOW

COVER

COVEROUTLET

INLET

OUTLETINLET



Valves &

Accessories


Model CV-1 Grooved End Check Valves(Page 2 of 2)

Tech Data Sheet: G352 BA

C

O.D.

12" NPT

12" NPT

D

EJ

F

Part Number

Pipe Size Dimensions mm In. Approx. Weight

kgLbs

Nominal DNIn.

O.D.mmIn.

AmmIn.

BmmIn.

CmmIn.

DmmIn.

EmmIn.

FmmIn.

JmmIn.

59590002050 60.3 171.5 111.3 64.8 65.3 82.3 120.7 41.5 4.12 2.375 6.75 4.38 2.55 2.57 3.25 4.75 1.62 9.0

59590002565 73.0 203.2 147.3 86.6 86.4 98.6 152.4 43.2 4.5

2- 12 2.875 8.00 5.80 3.41 3.40 3.88 6.00 17.0 10.0

59590007665 76.1 203.2 147.3 86.6 86.4 98.6 152.4 43.2 4.5

76.1mm 3.000 8.00 5.80 3.41 3.40 3.88 6.00 1.70 10.0

59590003080 88.9 212.6 146.3 91.4 86.4 98.6 152.4 43.2 5.03 3.500 8.37 5.76 3.60 3.40 3.88 6.00 1.70 11.0

595900040100 114.3 245.6 171.2 117.1 92.2 115.1 181.1 46.7 11.34 4.500 9.63 6.74 4.61 3.63 4.56 7.13 1.84 25.0

595900139125 139.7 266.7 190.5 134.4 106.7 124.5 193.0 48.3 13.2

139.7mm 5.500 10.50 7.50 5.29 4.20 4.90 7.60 1.90 29.0

595900050125 141.3 266.7 190.5 134.4 106.7 124.5 193.0 48.3 13.25 5.563 10.50 7.50 5.29 4.20 4.90 7.60 1.90 29.0

595900165150 165.1 292.1 204.4 146.1 114.3 127.0 193.0 37.6 21.3

165.1mm 6.500 11.50 8.05 5.75 4.50 5.00 7.60 1.48 47.0

595900060150 168.3 292.1 204.4 146.1 114.3 127.0 193.0 37.6 21.36 6.625 11.50 8.05 5.75 4.50 5.00 7.60 1.48 47.0

595900080200 219.1 355.6 260.4 196.9 142.7 138.4 213.4 58.9 29.98 8.625 14.00 10.25 7.75 5.62 5.45 8.40 2.20 66.0

595900100250 273.0 457.2 330.2 259.3 162.1 190.5 266.7 76.2 49.410 10.750 18.00 13.00 10.21 6.38 7.50 10.50 3.00 109.7

595900120300 323.9 533.4 362.7 287.2 184.4 193.5 269.7 69.9 68.012 12.750 21.00 14.28 11.31 7.26 7.62 10.62 2.75 2.68


Model CV-1 Pressure Loss Data



Valves &

Accessories

Shurjoint Model SJ-915Dual Disc Check Valves

(Page 1 of 2)




Kg.Lbs.

Nominalmm

Inches

Pipemm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches65 73.0 125 110 73 2.3

2 12 2.875 4.92 4.33 2.87 5.0

80 88.9 135 125 89 2.53 3.500 5.31 4.92 3.50 5.5

100 114.3 137 152 114 3.84 4.500 5.39 5.98 4.50 8.4

150 168.3 152 204 168 7.66 6.625 6.00 8.03 6.62 11.7

200 219.1 171 256 219 12.48 8.625 6.73 10.08 8.62 27.3

250 273.0 198 307 273 20.710 10.750 7.80 12.09 10.75 45.5

300 323.9 208 362 324 28.312 12.750 8.19 14.25 12.75 62.2



Nom. Rating Working Pressure Shell

TestMax. ServiceTemperature

Class 150

20 Bar @38°C300 psi @100°F

30 Bar450 psi





B

A

C

Size: 65 - 300mm (2 1⁄2" - 12")

The Shurjoint Model SJ-915 is a grooved-end dual-plate (or double-door) check valve designed to provide positive and silent protection against backflow in piping systems. The valve features a ductile iron body with an EPDM or Nitrile resilient seat molded to body and type 304 stainless steel discs loaded with type 313 stainless steel springs. Groove dimensions comply with ANSI/AWWA C606. Features:

valves)

economical than wafer or lugged valves

disc valves

MATERIAL SPECIFICATIONS Valve body:

ASTM A 395, Gr. 65-45-15.

Seat (Rubber Gasket) & Stabilization Rubber:

Discs:

Torsion Springs:

Disc hinge pin & disc stop pin:

Spacer & Washer:

Stop pin retainer:

Performance



Valves &

Accessories



Size: 300 - 600mm (14" - 24")

Shurjoint Model SJ-915Dual Disc Check Valves(Page 2 of 2)



Kg.Lbs.

Nominalmm

Inches

Pipemm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

Dmm

Inches

Emm

Inches350 355.6 368 329 184 283 154 46.014 14.000 14.49 12.96 7- 1

4 11.14 6.06 101.2

400 406.4 410 359 191 310 173 54.016 16.000 16.14 14.13 7- 1

2 12.20 6.81 118.8

450 457.2 461 417 203 364 203 77.018 18.000 18.15 16.42 8 14.33 8.00 169.4

500 508.0 509 460 219 408 226 96.020 20.000 20.04 18.11 8- 5

8 16.06 8.80 211.2

600 609.6 610 562 222 457 249 131.024 24.000 24.00 22.13 8- 3

4 18.00 9.80 288.2



Nom. Rating Working Pressure Shell

TestMax. ServiceTemperature

Class 150

17 Bar @38°C250 psi @100°F

26 Bar400 psi





A

E

B

C

DO.D.

The Shurjoint model SJ-915 is a grooved-end dual disc check valve for pipelines conveying water and other fluids with the rated working pressure to 17 Bar (250 psi), available in sizes 350 to 600mm (14” to 24” ). The valve features a fully lined rubber body, spring-loaded 304 stainless steel disc and shafts. The valve can be installed in a horizontal or vertical position (upward flow only). Face to face dimensions conform to API 594 Class 150 and grooved ends to ANSI/AWWA C606.

Seat test: (Hydrostatic) 1.90 MPa (275 psi) Shell test: (Hydrostatic) 2.75 MPa (400 psi)

Features

check valves)

economical than wafer or lugged valves

single disc valves

maintenance

MATERIAL SPECIFICATIONSBody:

Gr. 65-45-12 and or ASTM A395, Gr. 65-45-15, minimum tensile strength 4481 Bar (65,000 psi).

Body Lining: Buna-N: Good for petroleum oils, mineral oils, vegetable oils, aromatic hydrocarbons, many acids and water 65°C (150°F) Maximum temperature range: -29°C to 82°C ( -20°F to 180°F).

EPDM: Good for cold and hot water service up to 110°C (230°F) . Not recommended for petroleum oils, mineral oils, solvents and aromatic hydrocarbons. Maximum temperature range: -34°C to 110°C ( -29°F to 230°F)*. * See Data Sheet J-26

Discs, Disc Shafts, & Spring:

Washer:

Performance

Representative.



Valves &

Accessories

GRINNELL Model CB800 Circuit Balancing Valves are designed to achieve accurate and efficient balancing of hydronic heating or cooling systems. Circuit Balancing Valves provide superior accuracy in measuring flows rather than ball type circuit setters.

The CB800 valve serves 5 functions:

These valves are rated at 20.7 Bar (300 psi) at 150°C (300°F).

The Y-Pattern style provides low pressure drop. The globe style valve allows for precise throttling. The easy-to-adjust digital/vernier handwheel provides a minimum of 70 unique handwheel positions. The handwheel and test ports are located on one side for easy access. A built-in memory stop ensures the setting can be returned to a balanced position after shutoff. The self-sealing pressure/temperature test ports use standard insertion probes to eliminate additional components.

The GRINNELL Circuit Balancing Valve is installed with flow in the direction of the arrow, and may be in the horizontal or vertical position. The handwheel can be positioned up or down, or on either side.

CB800 Circuit Balancing ValvesTech Data Sheet: G450


( 1⁄2" – 2") solder or BSP threaded connection: brass-resistant to dezincification (DZR)

(2 1⁄2" – 12"), grooved or flanged connection: Cast Iron conforming to ASME ANSI B 16.5

Valve Stem and Disc

O-Ring

Handwheel

For accessories and replacement parts contact a GRINNELL Sales Representative for details.

Valve SizingAll balancing valves are sized to perform in a normal operation range between 25% and 100% of the full open position, at a minimum differential pressure between 0.3 – 0.9m (1 – 3 ft.) of water. It is recommended that for improved accuracy, the valve is set to open 70%+.

When maximum flow is known but a pressure drop through the balancing valve is unknown, select a balancing valve for a maximum pressure drop of 0.6m (2 ft.) water 0.06 Bar (0.8 psi) in the full open position as shown in the table to the right.

Accurate flow measurement requires that the velocity distribution near the balancing valve remains constant, regardless of the total flow through the pipe. Fittings, such as elbows and tees, disturb the normal flow profile which is established through straight pipe. Pumps create even greater disturbances. Failure to allow water flows around fittings and pumps to normalize can affect measuring accuracy by as much as 20% when the valve is in the fully open position. Minimum lengths (diameters, D) of straight pipe before and after the balancing valve prevent these errors.

Valves are designed for vertical, horizontal, or inclined installation.Minimum Pipe Diameters from Fittings

3D 2D Pump 10D 2D

Sizemm

Inches

Flow RateGPMLPM

ConnectionType

15 0.687 - 1.110

Thread or Solder

12 2.6 - 4.2

20 0.898 - 1.638 3

4 3.4 - 6.225 1.638 - 2.5361 6.2 - 9.632 2.483 - 5.548

1 14 9.4 - 21.0

40 3.96 - 7.931 1

2 15 - 3050 5.812 - 11.0962 22 - 4265 10.30 - 28.01

Flanged or Grooved

2 12 39 - 106

65 10.30 - 28.0176,1mm 39 - 106

80 15.85 - 34.873 60 - 132

100 26.42 - 57.334 100 - 217

125 29.59 - 83.75139,7mm 112 - 317

125 29.59 - 83.755 112 - 317

150 58.12 - 115.46165,1mm 220 - 437

150 58.12 - 115.466 220 - 437

200 58.92 - 232.768 223 - 881

250 77.15 - 342.9310 292 - 1298

300 162.75 - 457.3312 616 - 1731



Valves &

Accessories


L

H

Model CB800 Circuit Balancing Valves BSP Threaded EndsTech Data Sheet: G450

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining and filling. The GRINNELL Thread-by-Thread Model CB800 Valve, available in sizes 15 to 50mm ( 1⁄2" to 2"), is composed of zinc retaining brass.

Part Number

Pipe Size DimensionsApprox. Weight

Kg.Lbs.

Limits PN/°CPSI/°F

Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches

Lmm

Inches

Hmm

Inches

CB800050515 21.3 79.5 104.9 0.6 16/150

7 12 0.840 3.13 4.13 1.4 235/300

CB800075520 26.9 84.1 115.8 0.6 16/150

7 34 1.050 3.31 4.56 1.4 235/300

CB800100525 33.7 85.6 119.1 1.0 16/150

71 1.315 3.38 4.69 2.2 235/300

CB800125532 42.4 111.3 136.7 1.4 16/150

101 1

4 1.660 4.38 5.38 3.0 235/300

CB800150540 48.3 120.7 138.2 1.7 16/150

101 1

2 1.900 4.75 5.44 3.9 235/300

CB800200550 60.3 150.9 147.6 2.6 16/150

102 2.375 5.94 5.81 5.6 235/300

For information on alternative sizes, contact a GRINNELL Sales Representative.See circuit balancing valve specifications on pages 111.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



Valves &

Accessories

OD

L

H

Model CB800 Circuit Balancing Valves Grooved Ends

Tech Data Sheet: G450The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. The GRINNELL Groove-by-Groove Model CB800 Valve, available sizes 65 to 300mm (2 1⁄2" to 12"), is composed of cast iron.


Part Number


Kg.Lbs.

LimitsPN/°CPSI/°F

Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches

Lmm

Inches

Hmm

Inches

CB800250465 73.0 290.6 187.5 8.5 20.7/150

82 1

2 2.875 11.44 7.38 18.7 300/300

CB800760465 76.1 290.6 187.5 8.5 20.7/150

876,1mm 3.000 11.44 7.38 18.7 300/300

CB800300480 88.9 311.2 203.2 12.5 20.7/150

83 3.500 12.25 8.00 27.5 300/300

CB8004004100 114.3 349.3 239.8 20.5 20.7/150

84 4.500 13.75 9.44 45.1 300/300

CB8001394125 139.7 400.0 282.7 32.0 20.7/150

8139,7mm 5.500 15.75 11.13 70.4 300/300

CB8005004125 141.3 400.0 282.7 32.0 20.7/150

85 5.563 15.75 11.13 70.4 300/300

CB8001654150 165.1 479.6 285.8 43.5 20.7/150

8165,1mm 6.500 18.88 11.25 95.7 300/300

CB8006004150 168.3 479.6 285.8 43.5 20.7/150

86 6.625 18.88 11.25 95.7 300/300

CB8008004200 219.1 600.2 468.4 116.0 20.7/150

128 8.625 23.63 18.44 255.2 300/300

CB8001104250 273.1 730.3 479.6 171.0 20.7/150

1210 10.750 28.75 18.88 376.2 300/300

CB8001204300 323.9 849.4 514.4 136.0 20.7/150

1212 12.750 33.44 20.25 519.2 300/300




Valves &

Accessories


H

D

L

Model CB800 Circuit Balancing Valves Flanged Ends, PN16/PN10Tech Data Sheet: G450

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining, and filling. The GRINNELL Flange-by-Flange Model CB800 Valve, available in sizes 65 to 300mm (2 1⁄2" to 12"), is composed of cast iron.


Part Number


Kg.Lbs.


Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches

Lmm

Inches

Hmm

Inches

Dmm

Inches

CB800250665 73.0 290 188 185 13.5 16/150

82 1

2 2.875 11.4 7.4 7.3 18.7 235/300

CB800300680 88.9 310 203 200 18.0 16/150

83 3.500 12.2 8.0 7.9 39.6 235/300

CB8004006100 114.3 350 240 220 28.0 16/150

84 4.500 13.8 9.4 8.7 61.6 235/300

CB8005006125 141.3 400 283 250 40.5 16/150

85 5.563 15.7 11.1 9.8 89.1 235/300

CB8006006150 168.3 480 285 285 51.5 16/150

86 6.625 18.9 11.2 11.2 113.3 235/300

CB8008006200 219.1 600 467 340 129.5 16/150

128 8.625 23.6 18.4 13.4 284.9 235/300

CB8001106250 273.1 730 480 405 196.0 16/150

1210 10.750 28.7 18.9 15.9 431.2 235/300

CB8001206300 323.9 850 515 460 264.0 16/150

1212 12.750 33.5 20.3 18.1 580.8 235/300




Valves &

Accessories

H

D

L

Model CB800 Circuit Balancing Valves Flanged Ends, ANSI Class 125#


The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining, and filling. The GRINNELL Flange-by-Flange Model CB800 Valve, available in sizes 65 to 300mm (2 1⁄2" to 12"), is composed of cast iron.


Part Number


Kg.Lbs.


Handwheel Turns

Nominal mm

Inches

O.D.mm

Inches

Lmm

Inches

Hmm

Inches

Dmm

Inches

CB800250365 73.0 290 188 185 13.5 16/150

82 1

2 2.875 11.4 7.4 7.3 18.7 235/300

CB800300380 88.9 310 203 200 18.0 16/150

83 3.500 12.2 8.0 7.9 39.6 235/300

CB8004003100 114.3 350 240 220 28.0 16/150

84 4.500 13.8 9.4 8.7 61.6 235/300

CB8005003125 141.3 400 283 250 40.5 16/150

85 5.563 15.7 11.1 9.8 89.1 235/300

CB8006003150 168.3 480 285 285 51.5 16/150

86 6.625 18.9 11.2 11.2 113.3 235/300

CB8008003200 219.1 600 467 340 129.5 16/150

128 8.625 23.6 18.4 13.4 284.9 235/300

CB8001103250 273.1 730 480 405 196.0 16/150

1210 10.750 28.7 18.9 15.9 431.2 235/300

CB8001203300 323.9 850 515 485 264.0 16/150

1212 12.750 33.5 20.3 19.1 580.8 235/300




Valves &

Accessories


Model CB800 Circuit Balancing Valves Solder EndsTech Data Sheet: G450

The GRINNELL Model CB800 Balancing Valve provides features for achieving accurate and efficient balancing of hydronic heating or cooling systems. One valve serves five functions: throttling, measuring (pressure and temperature), positive shutoff, draining and filling. The GRINNELL Solder-by-Solder Model CB800 Valve, available in sizes 15 to 50mm ( 1⁄2" to 2"), is composed of zinc retaining brass

L

H


Kg.Lbs.


Handwheel TurnsNominal mm

Inches

O.D.mm

Inches

Lmm

Inches

Hmm

Inches15 21.3 88.9 114.3 0.6 16/150

7 12 0.840 3.50 4.50 1.4 235/300

20 26.9 96.8 115.8 0.6 16/1507 3

4 1.050 3.81 4.56 1.4 235/300

25 33.7 109.5 119.1 1.0 16/1507

1 1.315 4.31 4.69 2.2 235/300

32 42.4 128.5 136.7 1.4 16/15010

1 14 1.660 5.06 5.38 3.0 235/300

40 48.3 141.2 138.2 1.7 16/15010

1 12 1.900 5.56 5.44 3.9 235/300

50 60.3 166.6 147.6 2.6 16/15010

2 2.375 6.56 5.81 5.6 235/300




Valves &

Accessories

Model CB800 Circuit Balancing Valves MC2 Measuring Computer

Tech Data Sheet: G450The GRINNELL Model MC2 computer is a hand-held computer-balancing instrument designed to measure the flow in GRINNELL Balancing Valves from 15 – 300mm ( 1⁄2" – 12"). The GRINNELL Model MC2 computer:

All results may be saved in the hand-held computer and can be downloaded to a PC at a later time.The easy-to-operate touch button keypad protects against water and dirt particles. The hand-held computer is supplied with a rechargeable power pact. All parts of the hand-held computer are stored in a convenient carrying case.Note: Only available in select regions, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

H

D

H

D

L

L

Model CB800 Circuit Balancing Valves Insulation Kits


The insulation shells have a CFC-free inner core made of polyurethane foam with a 1.5mm (0.06") plastic coat. It consists of two double shells which are tightened by two metal straps.

Available for sizes 15 – 200mm ( 1⁄2" – 8"). Specify size and end-connection type.

Sizes 15 – 50mm ( 1⁄2" – 2" )

Sizes 65 – 200mm( 21⁄2" – 8" )


Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Dmm

Inches

Hmm

Inches

Lmm

Inches15 21.3 69 136 183 0.15 1

2 0.840 2.72 5.35 7.20 0.320 26.9 77 143 195 0.18 3

4 1.050 3.31 5.63 7.68 0.425 33.7 85 151 243 0.221 1.315 3.35 5.94 9.57 0.532 42.4 97 172 254 0.20

1 14 1.660 3.82 6.77 10.00 0.4

40 48.3 105 185 250 0.331 1

2 1.900 4.13 7.28 9.84 0.750 60.3 120 209 276 0.432 2.375 4.72 8.23 10.87 0.965 73.0 260 410 505 3.06

2 12 2.875 10.2 16.1 19.9 6.7

80 88.9 280 415 530 3.253 3.500 11.0 16.3 20.9 7.2

100 114.3 320 520 580 5.164 4.500 12.6 20.5 22.8 11.4

125 141.3 360 560 620 5.245 5.563 14.2 22.1 24.4 11.6

150 168.3 400 600 730 5.976 6.625 15.7 23.6 28.7 13.2

200 219.1 450 760 800 -8 8.625 17.6 30.0 31.5 ◆

For information on alternative sizes, contact a GRINNELL Sales Representative.◆ Contact a GRINNELL Sales Representative for details.See circuit balancing valve specifications on pages 111.For instructions on part numbers, ordering information, and availability, refer to




Valves &

Accessories


Figure 70607 Groove Ended Metering Station

Part Number

Pipe Size Dimensions - mm Inches

KvNominal mm

Inches

O.D.mm

InchesA B H J

706075165 76.1 80 108 76.1 195

10276.1mm 3.000 3.15 4.25 3.00 7.68

706075280 88.9 80 125 88.9 212

1203 3.500 3.15 4.92 3.50 8.35

7060753100 114.3 80 147 114.3 234

2344 4.500 3.15 5.79 4.50 9.21

7060754125 139.7 80 175 139.7 262

335139.7mm 5.500 3.15 6.89 5.50 10.31

7060755150 165.1 80 202 165.1 289

522165.1mm 6.500 3.15 7.95 6.50 11.38

7060756200 219.1 100 251 219.1 338

7808 8.625 3.94 9.88 8.63 13.31

7060757250 273.1 100 300 273.1 387

119710 10.750 3.94 11.81 10.75 15.24

7060758300 323.9 100 345 323.9 432

181012 12.750 3.94 13.58 12.75 17.01



Description:

complete with 2 extended pressure test points.

Application:

in the pipework of hot water heating and chilled water systems to obtain flow measurements.

232 psi)

14°F to 302°F)

Materials:

recommended a minimum of 5 diameters of straight, valve sized, pipe on the inlet of the metering station and 3 diameters on the outlet.

HB

J

DN 65

1 2 3 4 5 6 7 8 10

2

3

4

56789

100

2

Sign

al Δ

p [m

bar]

Rate of Flow V [I/s]

3

4

56789

1000

4

56789

10

2

3

4

56789100

2

Sign

al Δ

p [m

bar]

3

4

567891000

4

5678910

2 3 4 5 6 7 8 100 2 3 4 5

80 100 125 150 200 250 300



Valves &

Accessories

Figure Venturi, Flow Meter Butt Weld with Grooved Ends

Part Number

Pipe Size Max. WkPressure

Barpsi

PumpCapacity

LPMGPM

Flow RangeLPMGPM

AmmIn.

Required straight pipe length Approx

WeightKg.Lbs.

Nominal DNIn.

O.D.mmIn.

BeforemmIn.

AftermmIn.

K01000073465 73.0 34.5 379 189-757 101.6 365 146 4.0

2- 12 2.875 500 100 50-200 4.00 14.37 5.75 8.8

K015000894803

88.93.500

34.5500

568 284-1135 111.1 445 178 8.0150 75-300 4.37 17.52 7.01 17.6

K020000894757 378-1514 111.1 445 178 8.0200 100-400 4.37 17.52 7.01 17.6

K025001144

1004

114.34.500

34.5500

946 473-1892 95.3 570 228 8.0250 125-500 3.75 22.44 8.98 17.6

K0300011441.136 567-2271 95.3 570 228 8.0300 150-600 3.75 22.44 8.98 17.6

K0450011441.703 851-3406 95.3 570 228 8.0450 225-900 3.75 22.44 8.98 17.6

K050001414125 141.3 34.5 1.893 946-3785 127 695 278 8.55 5.563 500 500 250-1000 5.00 27.36 10.94 18.7

K075001684

1506

168.36.625

34.5500

2.839 1419-5677 152.4 840 336 8.5750 375-1500 6.00 33.07 13.23 18.7

K1000016843.785 1892-7570 152.4 840 336 8.51,000 500-2000 6.00 33.07 13.23 18.7

K1250016844.731 2365-9462 152.4 840 336 8.51,250 625-2500 6.00 33.07 13.23 18.7

K150002194

2008

219.18.625

34.5500

5.678 2838-11355 177.8 1095 438 10.5

1,500 750-3000 7.00 43.11 17.24 23.1

K2000021947.570 3785-15140 177.8 1095 438 10.5

2,000 1000-4000 7.00 43.11 17.24 23.1

K2500021949.463 4731-18925 177.8 1095 438 10.5

2,500 1250-5000 7.00 43.11 17.24 23.1

K30000219411.355 5677-22710 177.8 1095 438 10.5

3,000 1500-6000 7.00 43.11 17.24 23.1

K350002734

25010

273.010.750

34.5500

13.248 6623-26495 203.2 1365 546 13.0

3,500 1750-7000 8.00 53.74 21.50 28.7

K40000273415.140 7570-30280 203.2 1365 546 13.0

4,000 2000-8000 8.00 53.74 21.50 28.7

K45000273417.033 8516-34065 203.2 1365 546 13.0

4,500 2250-9000 8.00 53.74 21.50 28.7

K500003244300 323.9 34.5 18.925 9462-37850 304.8 1620 648 18.0

12 12.750 500 5,000 2500-10000 12.00 63.78 25.51 39.7

Note: End Connections: provided with butt weld and grooved ends Gauge: 114mm (4 1⁄2" ) dual scale LPM/GPM Body material: Steel Approval: FM


Metal

Identification

Tag

A

GERAND



Valves &

Accessories


Figure 760 WYE-Strainer

Part Number

Pipe SizeMax. Wk

Pressure*Barpsi

Amm

Inches

Bmm

Inches

Drain Plug Size NPT

mmInches

CvValues**

LPMGPM

KvValues**

m3/hGPM

ApproxWeight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

760F0006050 60.3 20.7 248 192 12.7 52 45 4.52 2.375 300 9.76 7.56 0.5 13.7 198 9.9

760F0007365 73.0 20.7 173 211 12.7 83 72 5.9

2 12 2.875 300 6.81 8.31 0.5 21.9 317 13.0

760F0007665 76.1 20.7 273 211 12.7 83 72 5.9

76.1mm 3.000 300 10.75 8.31 0.5 21.9 317 13.0

760F0008880 88.9 20.7 299 231 25.4 149 129 8.23 3.500 300 11.77 9.09 1 39.4 568 18.1

760F00114100 114.3 20.7 362 281 25.4 273 236 12.74 4.500 300 14.25 11.06 1 72.1 1,039 28.0

760F00139125 139.7 20.7 419 330 25.4 419 363 22.0

139,7mm 5.500 300 16.50 12.99 1 110.7 1,598 48.5

760F00165150 165.1 20.7 470 367 38.1 718 621 31.8

165,1mm 6.500 300 18.50 14.45 1.5 189.7 2,734 70.1

760F00168150 168.3 20.7 470 367 38.1 718 621 31.86 6.625 300 18.50 14.45 1.5 189.7 2,734 70.1

760F00219200 219.1 20.7 610 467 38.1 946 818 52.38 8.625 300 24.02 18.39 1.5 249.9 3,602 115.3

760F00273250 273.1 20.7 686 559 38.1 1709 1478 90.010 10.750 300 27.01 22.01 1.5 451.5 6,507 198.4

760F00324300 323.9 20.7 762 629 38.1 2680 2318 120.0

12 12.750 300 30.00 24.76 1.5 708.1 10,206 264.6

* Maximum working pressure is based upon the performance capability of the GRINNELL WYE-Strainer. Maximum system working pressure is dependant upon the rigid couplings used for installation and the pressure capacity of the system components.

** Cv values are for flow of water at 16° C (60° F )For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

A

B


Grade 65-45-12. Colour: Red

Strainer Basket

1.6 mm (0.06")in sizes 50 to 80mm (2" to 3" 3.2mm (0.16") in sizes 100 to 300mm (4" to 12") For other mesh sizes contact GRINNELL.

Access Coupling & End Cap

Bolts/Nuts

hex nuts conforming to ASTM A-183 with a minimum tensile7584 Bar (110,000 psi). Zinc electroplated as standard.

Coupling GasketGrade E EPDM (Designed in accordance with ASTM D-2000). Service temperature -40°C to 110°C (-40°F to 230°F). Recommended for water services, dilute acids, alkalies, oil free air and many chemical services. NOT FOR USE IN PETROLEUM SERVICES. Other gasket materials on request.

Drain Plug

Performance



Valves &

Accessories

Figure S855 Tee StrainersTech Data Sheet: G430

The Tee Strainer is designed to remove particles from pipelines where a compact, accessible strainer is needed for the protection of pumps, meters, valves, and similar mechanical equipment. The inlet and outlet ends are suitable for installation with GRINNELL Couplings that provide quick and easy installation.

The cover is secured by a GRINNELL Figure 772 Coupling for easy access to the screen. The cover is tapped and plugged to allow for draining.

The GRINNELL Figure S855 Tee Strainer is rated for the following pressures:

(2" – 5"): 51.7 bar (750 psi) at 38°C (100°F)

(6"): 48.3 bar (700 psi) at 38°C (100°F) (8"): 41.7 bar (600 psi) at 38°C (100°F) (10"): 34.5 bar (500 psi) at 38°C (100°F) (12"): 27.6 bar (400 psi) at 38°C (100°F)

The Figure S855 Tee Strainer perforated screen has the following perforations:

(2" – 6") = 3.2mm ( 1⁄8") (8" – 12") = 4.0mm ( 5⁄32")

Note: Other perforation screen sizes are available upon request. Specify particle retention size when ordering nonstandard screens.

MATERIAL SPECIFICATIONSDuctile Iron Body and Cover

Standard specification for ductile iron castings

(65,000 psi)(45,000 psi)

(2"), minimum 12%

Screen

for Sizes 50 – 150mm (2" – 6")

for Sizes 200 – 300mm (8" – 12")

Coating

Performance

Mechanical Products.

Pipe Size Dimensions - mm Inches Approx. Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

InchesA B

D Screen

Removal50 60.3 165.0 108.0 191.0 2.72 2.375 6.50 4.25 7.50 6.0

65 73.0 191.0 110.0 222.0 5.02 1

2 2.875 7.50 4.75 8.75 11.0

80 88.9 216.0 133.0 254.0 5.43 3.500 8.50 5.25 10.00 12.0

100 114.3 254.0 156.0 305.0 9.04 4.500 10.00 6.13 12.00 20.0

125 141.3 279.0 168.0 342.0 13.05 5.563 11.00 6.63 13.50 30.0

150 168.3 330.0 194.0 406.0 18.06 6.625 13.00 7.63 16.00 40.0

200 219.1 394.0 232.0 494.0 36.08 8.625 15.50 9.13 19.44 81.0

250 273.0 457.0 264.0 583.0 57.010 10.750 18.00 10.38 22.94 126.0

300 323.9 508.0 289.0 659.0 79.012 12.750 20.00 11.38 25.94 174.0


Lead time may vary by size, contact a GRINNELL Sales Representative for more information.


A

B

D



Valves &

Accessories


Figure S810 Suction Diffusers(Page 1 of 2)


The GRINNELL Figure S810 Suction Diffuser is compact and rugged for direct mounting to the suction side of a pump in either a horizontal or vertical position. In addition to removing foreign particles, this diffuser also provides proper flow conditions to the pump. Where space is limited, this diffuser can be used to replace the straight pipe normally required to reduce turbulence.

The GRINNELL Figure S810 Suction Diffuser’s permanent perforated stainless steel screen helps remove foreign particles. The inlet end is suitable for installation with GRINNELL Couplings. The outlet end is provided with a 150# ANSI flat face flange. Integral straightening vanes in the diffuser outlet reduce turbulence so that stress and erosion on the pump is minimized.

Maximum working pressure is 20.7 Bar (300 psi) at 38°C (100°F) and 11.4 Bar (165 psi) at 149°C (300°F).

Note: Pressure and temperature can be limited by O-ring material. Contact a GRINNELL Sales Representative.

A F

D

B

H

E

G

C


kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C D E

F Screen

Removal

G Plug NPT

H Pipe

Support ID50 x 50 60.3 x 60.3 114.3 114.3 169.9 155.7 258.8 223.8 20 20.9 8.62 x 2 2.375 x 2.375 4.50 4.50 6.69 6.13 10.19 8.81 0.75 0.824 19

65 x 50 73.0 x 60.3 127.0 127.0 190.5 166.6 276.4 231.9 20 35.1 9.12 1

2 x 2 2.875 x 2.375 5.00 5.00 7.50 6.56 10.88 9.13 0.75 1.38 2065 x 65 73.0 x 73.0 127.0 127.0 190.5 166.6 276.4 231.9 20 35.1 10.0

2 12 x 2 1

2 2.875 x 2.875 5.00 5.00 7.50 6.56 10.88 9.13 0.75 1.38 2280 x 50 88.9 x 60.3 139.7 139.7 214.4 187.5 293.6 244.6 20 35.1 17.23 x 2 3.500 x 2.375 5.50 5.50 8.44 7.38 11.56 9.63 0.75 1.38 38.0

80 x 65 88.9 x 73.0 139.7 139.7 214.4 187.5 293.6 244.6 20 35.1 17.73 x 2 1

2 3.500 x 2.875 5.50 5.50 8.44 7.38 11.56 9.63 0.75 1.38 39.0

MATERIAL SPECIFICATIONSBody and Cover

Knobs

65-45-12 for sizes 80mm x 50mm thru 250mm x 200mm (3" x 2" thru 10" x 8") Stud/nuts carbon steel conforming to ASTM A 193-4, for sizes 250mm x 250mm (10" x 10") and larger

Screen( 5⁄32") perforated type 304 stainless steel for

sizes 80mm x 50mm thru 150mm x 150mm (3" x 2" thru 6" x 6")

( 1⁄8") perforated type 304 stainless steel for sizes 200 x 125mm (8" x 5") and larger

Coating

Performance

Mechanical Products.



Valves &

Accessories


kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C D E

F Screen

Removal

G Plug NPT

H Pipe

Support ID80 x 80 88.9 x 88.9 139.7 139.7 214.4 187.5 293.6 244.6 20 35.1 18.13 x 3 3.500 x 3.500 5.50 5.50 8.44 7.38 11.56 9.63 0.75 1.38 40.0

100 x 50 114.3 x 60.3 146.1 146.1 231.9 193.8 300.0 284.0 20 35.1 21.84 x 2 4.500 x 2.375 5.75 5.75 9.13 7.63 11.81 11.18 0.75 1.38 48.0

100 x 65 114.3 x 73.0 165.1 165.1 266.2 222.3 333.5 244.6 25 35.1 22.24 x 2 1

2 4.500 x 2.875 6.50 6.50 10.48 8.75 13.13 9.63 1.00 1.38 49.0100 x 80 114.3 x 88.9 165.1 173.0 265.2 222.3 333.5 292.1 25 35.1 22.7

4 x 3 4.500 x 3.500 6.50 6.81 10.44 8.75 13.13 11.50 1.00 1.38 50.0100 x 100 114.3 x 114.3 165.1 173.0 265.2 222.3 333.5 292.1 25 35.1 23.6

4 x 4 4.500 x 4.500 6.50 6.81 10.44 8.75 13.13 11.50 1.00 1.38 52.0125 x 80 141.3 x 88.9 165.1 165.1 266.2 222.3 333.5 292.1 25 35.1 42.6

5 x 3 5.563 x 3.500 6.50 6.50 10.48 8.75 13.13 11.50 1.00 1.38 94.0125 x 100 141.3 x 114.3 165.1 165.1 303.3 254.0 400.1 355.6 25 35.1 43.5

5 x 4 5.563 x 4.500 6.50 6.50 11.94 10.00 15.75 14.00 1.00 1.38 96.0125 x 125 141.3 x 141.3 190.5 190.5 303.3 254.0 400.1 378.0 25 35.1 45.8

5 x 5 5.563 x 5.563 7.50 7.50 11.94 10.00 15.75 14.88 1.00 1.38 101.0150 x 80 168.3 x 88.9 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 46.7

6 x 3 6.625 x 3.500 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 103.0150 x 100 168.3 x 114.3 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 48.1

6 x 4 6.625 x 4.500 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 106.0150 x 125 168.3 x 141.3 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 49.9

6 x 5 6.625 x 5.563 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 110.0150 x 150 168.3 x 168.3 203.2 203.2 338.1 266.7 428.8 420.6 25 35.1 51.2

6 x 6 6.625 x 6.625 8.00 8.00 13.31 10.50 16.88 16.56 1.00 1.38 113.0200 x 125 219.1 x 141.3 228.6 228.6 365.3 292.1 454.2 428.8 25 35.1 61.2

8 x 5 8.625 x 5.563 9.00 9.00 14.38 11.50 17.88 16.88 1.00 1.38 135.0200 x 150 219.1 x 168.3 228.6 254.0 388.9 292.1 454.2 428.8 25 35.1 62.1

8 x 6 8.625 x 6.625 9.00 10.00 15.31 11.50 17.88 16.88 1.00 1.38 137.0200 x 200 219.1 x 219.1 228.6 254.0 414.3 298.5 527.1 581.2 32 35.1 100.7

8 x 8 8.625 x 8.625 9.00 10.00 16.31 11.75 20.75 22.88 1.25 1.38 222.0250 x 150 273.1 x 168.3 240.8 240.8 393.7 303.3 465.1 428.8 32 35.1 104.3

10 x 6 10.750 x 6.625 9.48 9.48 15.50 11.94 18.31 16.88 1.25 1.38 230.0250 x 200 237.1 x 219.1 228.6 298.5 468.4 298.5 527.1 581.2 32 35.1 107.0

10 x 8 10.750 x 8.625 9.00 11.75 18.44 11.75 20.75 22.88 1.25 1.38 236.0250 x 250 273.1 x 273.1 279.4 298.5 508.0 355.6 670.1 781.1 32 35.1 155.610 x 10 10.750 x 10.750 11.00 11.75 20.00 14.00 26.38 30.75 1.25 1.38 343.0

300 x 200 323.9 x 219.1 228.6 228.6 498.6 298.5 527.1 581.2 32 35.1 161.912 x 8 12.000 x 8.625 9.00 9.00 19.63 11.75 20.75 22.88 1.25 1.38 357.0

300 x 250 323.9 x 273.1 279.4 327.2 533.4 355.6 670.1 781.1 32 35.1 161.912 x 10 12.000 x 10.750 11.00 12.88 21.00 14.00 26.38 30.75 1.25 1.38 357.0

300 x 300 323.9 x 323.9 304.8 304.8 560.3 387.4 665.0 781.1 32 35.1 161.912 x 12 12.000 x 12.000 12.00 12.00 22.06 15.25 26.18 30.75 1.25 1.38 357.0

350 x 250 355.6 x 273.1 279.4 279.4 571.5 355.6 670.1 781.1 32 35.1 229.914 x 10 14.000 x 10.750 11.00 11.00 22.50 14.00 26.38 30.75 1.25 1.38 507.0

350 x 300 355.6 x 323.9 304.8 304.8 568.5 387.4 665.0 787.4 32 35.1 272.614 x 12 14.000 x 12.000 12.00 12.00 22.38 15.25 26.18 31.00 1.25 1.38 601.0

350 x 350 355.6 x 355.6 355.6 355.6 635.0 444.5 704.9 841.5 50 35.1 320.214 x 14 14.000 x 14000 14.00 14.00 25.00 17.50 27.75 33.13 2.00 1.38 706.0

400 x 350 406.4 x 355.6 355.6 355.6 660.4 444.5 708.2 787.4 50 35.1 340.116 x 14 16.000 x 14.000 14.00 14.00 26.00 17.50 27.88 31.00 2.00 1.38 750.0


Figure S810 Suction Diffusers(Page 2 of 2)




Valves &

Accessories


Figure 7550 Expansion Joint(Page 1 of 6)


GRINNELL Grooved Expansion Joints are custom-designed, thermal movement solutions that utilize the proven design characteristics of GRINNELL Flexible Couplings.

Expansion joints are designed to be used in both hot and cold applications. When pipe heats up, the expansion joint contracts to absorb the thermal expansion of the pipe. When pipe cools down, the expansion joint expands to absorb the thermal contraction of the pipe.

The expansion joints are factory fabricated and calibrated to the specific thermal movement conditions of the piping runs. The joints are manufactured from machined grooved nipples and GRINNELL Flexible Couplings, providing dependable, high pressure performance.

Expansion Joints should be anchored and guided in accordance with standard industry practices. Refer to the appropriate coupling data sheet for pressure/temperature ratings and materials of construction.

Nipples are manufactured from standard wall, A 53B black steel pipe.

Figure 7550 Expansion joints are custom designed to your specifications. Contact GRINNELL Mechanical Services for additional information.

Nominal Pipe Size 32mm to 400mm (1 1⁄4” to 16”):

mm Inches

Pipe Finish Black Galvanised Stainless Steel

Coupling Finish Orange

Paint RAL Red Galvanised Stainless Steel

Gasket Material* Grade “E”

EPDMGrade “T”

NitrileGrade “O”

FluoroelastomerGrade “L” Silicone

Factory Preset Fully

ExpandedFully

Compressed

Intermediate**

%

Total Required

Movement:

25.4mm 31.8mm 38.1mm 44.5mm

1.00" 1.25" 1.50" 1.75"

* These products are assembled with a silicone-based lubricant. ** For intermediate factory preset indicate percentage of

movement from compressed position.

Ordering ProcedureGRINNELL Mechanical Products are available globally through a network of distribution centres. Visit www.grinnell.com for the nearest distributor. When placing an order, indicate the full product name.

Use the worksheet shown below to specify information required for ordering expansion joints.

Specify quantity, nominal pipe size, (ANSI or O.D.), figure number (Figure 7550 Flexible Coupling), and type of gasket:



Valves &

Accessories



W

Y

EXPANSIONJOINT

ENSURE SUPPORTCRADLE FLANGES CONTACT

ONLY TANGENT TOCOUPLING HOUSINGS

SUPPORTCRADLE

(FABRICATEDBY OTHERS)

DO NOT ALLOWSUPPORT CRADLE FLANGES TO

INTERFERE WITH COUPLINGLOBES, NUTS OR BOLTS

ANCHOR ANCHOREND COUPLINGS GUIDES

EXPANSION JOINT

(NOT INCLUDED)

Figure 7550 Expansion Joints Typical Installation

Figure 7550 Expansion Joints Retaining Bracket Detail

RETAININGBRACKET

EXPANSIONJOINT

Figure 7550 Expansion Joints Nominal Dimensions for End Elevation View

Pipe Size Dimensions - mm Inches Coupling Movement Capability

mmInches

Nominal mm

Inches

O.D.mm

Inches

Y Coupling Length

WOverall Width

32 42.4 106.4 247.7 3.181 1

4 1.660 4.190 9.750 0.125

40 48.3 112.8 244.5 3.181 1

2 1.900 4.440 9.625 0.125

50 60.3 124.0 276.2 3.182 2.375 4.880 10.875 0.125

65 73.0 139.7 273.1 3.182 1

2 2.875 5.500 10.750 0.125

80 88.9 165.1 298.5 3.183 3.500 6.500 11.750 0.125

100 114.3 196.9 328.6 6.354 4.500 7.750 12.937 0.250

125 141.3 247.7 362.0 6.355 5.563 9.750 14.250 0.250

150 168.3 271.5 393.7 6.356 6.625 10.690 15.500 0.250

200 219.1 344.4 463.6 6.358 8.625 13.560 18.250 0.250

250 273.0 416.1 511.2 6.3510 10.750 16.380 20.125 0.250

300 323.9 479.6 568.3 6.3512 12.750 18.880 22.375 0.250

350 355.6 517.7 612.8 6.3514 14.000 20.380 24.125 0.250

400 406.4 575.1 707.9 6.3516 16.000 22.640 27.870 0.250

Refer to Technical Data Sheet G460 for additional dimensions and information.For instructions on part numbers, ordering information, and availability, refer to page




Valves &

Accessories




LZ

X

Figure 7550-1 Expansion Joints - 25.4mm (1" ) Total Movement Length Nominal Dimensions for Side Elevation View

Nominal Pipe Size Flexible* Coupling Figure / Quantity

X Coupling Height

mmInches

Z Tie

Locationmm

Inches

L Compressed

Lengthmm

Inches

L Expanded

Lengthmm

Inches

Total Movement Capability

mmInches

Approx. Weight

Kg.Lbs.

ANSI mm

Inches

O.D.mm

Inches

32 42.4705 / 8

65.02 31.75 676.27 701.67 25.40 11.81 1

4 1.660 2.560 1.25 26.625 27.625 1.000 26

40 48.3705 / 8

69.85 31.75 676.27 701.67 25.40 12.71 1

2 1.900 2.750 1.25 26.625 27.625 1.000 28

50 60.3705 / 8

82.55 31.75 676.27 701.67 25.40 14.12 2.375 3.250 1.25 26.625 27.625 1.000 31

65 73.0705 / 8

93.73 31.75 676.27 701.67 25.40 16.82 1

2 2.875 3.690 1.25 26.625 27.625 1.000 37

80 88.9705 / 8

111.25 31.75 676.27 701.67 25.40 22.23 3.500 4.380 1.25 26.625 27.625 1.000 49

100 114.3705 / 4

144.53 31.75 444.50 469.90 25.40 16.34 4.500 5.690 1.25 17.500 18.500 1.000 36

125 141.3705 / 4

174.75 31.75 444.50 469.90 25.40 24.05 5.563 6.880 1.25 17.500 18.500 1.000 53

150 168.3705 / 4

201.68 31.75 444.50 469.90 25.40 26.86 6.625 7.940 1.25 17.500 18.500 1.000 59

200 219.1705 / 4

258.83 34.93 488.95 511.17 25.40 47.28 8.625 10.190 1.375 19.125 20.125 1.000 104

250 273.0705 / 4

322.33 34.93 546.10 571.50 25.40 81.210 10.750 12.690 1.375 21.500 22.500 1.000 179

300 323.9705 / 4

379.48 34.93 546.10 571.50 25.40 106.612 12.750 14.940 1.375 21.500 22.500 1.000 235

350 355.6707 / 4

423.42 38.10 587.40 612.77 25.40 138.414 14.000 16.670 1.500 23.125 24.125 1.000 305

400 406.4707 / 4

478.28 38.10 612.77 638.17 25.40 168.216 16.000 18.830 1.500 24.125 25.125 1.000 371

* 32 to 200mm (1 1⁄4" - 8" ) Figure 405 Stainless Steel Couplings available upon request.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



Valves &

Accessories



Figure 7550-13 Expansion Joints - 31.8mm (1 1⁄4" ) Total Movement Length Nominal Dimensions for Side Elevation View

LZ

X


X Coupling Height

mmInches

Z Tie

Locationmm

Inches

L Compressed

Lengthmm

Inches

L Expanded

Lengthmm

Inches


mmInches

Approx. Weight

Kg.Lbs.

ANSI mm

Inches

O.D.mm

Inches

32 42.4705 / 10

65.02 31.75 796.92 828.67 31.75 14.11 1

4 1.660 2.560 1.25 31.375 32.625 1.250 31

40 48.3705 / 10

69.85 31.75 796.92 828.67 31.75 15.01 1

2 1.900 2.750 1.25 31.375 32.625 1.250 33

50 60.3705 / 10

82.55 31.75 796.92 828.67 31.75 16.82 2.375 3.250 1.25 31.375 32.625 1.250 37

65 73.0705 / 10

93.73 31.75 796.92 828.67 31.75 20.42 1

2 2.875 3.690 1.25 31.375 32.625 1.250 45

80 88.9705 / 10

111.25 31.75 796.92 828.67 31.75 26.83 3.500 4.380 1.25 31.375 32.625 1.250 59

100 114.3705 / 5

144.53 31.75 508.00 539.75 31.75 19.54 4.500 5.690 1.25 20.000 21.250 1.250 43

125 141.3705 / 5

174.75 31.75 508.00 539.75 31.75 29.05 5.563 6.880 1.25 20.000 21.250 1.250 64

150 168.3705 / 5

201.68 31.75 508.00 539.75 31.75 31.86 6.625 7.940 1.25 20.000 21.250 1.250 70

200 219.1705 / 5

258.83 34.93 558.80 590.55 31.75 56.78 8.625 10.190 1.375 22.000 23.250 1.250 125

250 273.0705 / 5

322.33 34.93 622.30 654.05 31.75 97.510 10.750 12.690 1.375 24.500 25.750 1.250 215

300 323.9705 / 5

379.48 34.93 622.30 654.05 31.75 127.512 12.750 14.940 1.375 24.500 25.750 1.250 281

350 355.6707 / 5

423.42 38.10 673.10 704.85 31.75 138.414 14.000 16.670 1.500 26.500 27.750 1.250 365

400 406.4707 / 5

478.28 38.10 698.50 730.25 31.75 168.216 16.000 18.830 1.500 27.500 28.750 1.250 441




Valves &

Accessories





LZ

X


X Coupling Height

mmInches

Z Tie

Locationmm

Inches

L Compressed

Lengthmm

Inches

L Expanded

Lengthmm

Inches


mmInches

Approx. Weight

Kg.Lbs.

ANSI mm

Inches

O.D.mm

Inches

32 42.4705 / 12

65.02 31.75 917.57 955.68 38.10 16.81 1

4 1.660 2.560 1.25 36.125 37.625 1.500 37

40 48.3705 / 12

69.85 31.75 917.57 955.68 38.10 17.71 1

2 1.900 2.750 1.25 36.125 37.625 1.500 39

50 60.3705 / 12

82.55 31.75 917.57 955.68 38.10 19.52 2.375 3.250 1.25 36.125 37.625 1.500 43

65 73.0705 / 12

93.73 31.75 917.57 955.68 38.10 23.62 1

2 2.875 3.690 1.25 36.125 37.625 1.500 52

80 88.9705 / 12

111.25 31.75 917.57 955.68 38.10 31.33 3.500 4.380 1.25 36.125 37.625 1.500 69

100 114.3705 / 6

144.53 31.75 571.50) 609.60) 38.10 22.7)4 4.500 5.690 1.25 22.500 24.000 1.500 50

125 141.3705 / 6

174.75 31.75 571.50 609.60 38.10 33.65 5.563 6.880 1.25 22.500 24.000 1.500 74

150 168.3705 / 6

201.68 31.75 571.50 609.60 38.10 36.76 6.625 7.940 1.25 22.500 24.000 1.500 81

200 219.1705 / 6

258.83 34.93 631.82 669.93 38.10 65.88 8.625 10.190 1.375 24.875 26.375 1.500 145

250 273.0705 / 6

322.33 34.93 698.50 736.60 38.10 113.810 10.750 12.690 1.375 27.500 29.000 1.500 251

300 323.9705 / 6

379.48 34.93 698.50 736.60 38.10 148.812 12.750 14.940 1.375 27.500 29.000 1.500 328

350 355.6707/ 6

423.42 38.10 758.82 796.93 38.10 192.814 14.000 16.670 1.500 29.875 31.375 1.500 425

400 406.4707 / 6

478.28 38.10 784.22 822.32 38.10 232.216 16.000 18.830 1.500 30.875 32.375 1.500 512




Valves &

Accessories




LZ

X


X Coupling Height

mmInches

Z Tie

Locationmm

Inches

L Compressed

Lengthmm

Inches

L Expanded

Lengthmm

Inches


mmInches

Approx. Weight

Kg.Lbs.

ANSI mm

Inches

O.D.mm

Inches

32 42.4705 / 14

65.02 31.75 1038.22 1082.67 44.45 19.01 1

4 1.660 2.560 1.25 40.875 42.625 1.750 42

40 48.3705 / 14

69.85 31.75 1038.22 1082.67 44.45 20.41 1

2 1.900 2.750 1.25 40.875 42.625 1.750 45

50 60.3705 / 14

82.55 31.75 1038.22 1082.67 44.45 22.22 2.375 3.250 1.25 40.875 42.625 1.750 49

65 73.0705 / 14

93.73 31.75 1038.22 1082.67 44.45 27.22 1

2 2.875 3.690 1.25 40.875 42.625 1.750 60

80 88.9705 / 14

111.25 31.75 1038.22 1082.67 44.45 35.83 3.500 4.380 1.25 40.875 42.625 1.750 79

100 114.3705 / 7

144.53 31.75 635.00 679.45 44.45 25.94 4.500 5.690 1.25 25.000 26.750 1.750 57

125 141.3705 / 7

174.75 31.75 635.00 679.45 44.45 38.15 5.563 6.880 1.25 25.000 26.750 1.750 84

150 168.3705 / 7

201.68 31.75 635.00 679.45 44.45 41.76 6.625 7.940 1.25 25.000 26.750 1.750 92

200 219.1705 / 7

258.83 34.93 704.85 749.30 44.45 75.38 8.625 10.190 1.375 27.750 29.500 1.750 166

250 273.0705 / 7

322.33 34.93 774.70 819.15 44.45 130.210 10.750 12.690 1.375 30.500 32.250 1.750 287

300 323.9705 / 7

379.48 34.93 774.70 819.15 44.45 170.112 12.750 14.940 1.375 30.500 32.250 1.750 375

350 355.6707 / 7

423.42 38.10 844.55 889.00 44.45 220.514 14.000 16.670 1.500 33.250 35.000 1.750 486

400 406.4707 / 7

478.28 38.10 869.95 914.40 44.45 264.416 16.000 18.830 1.500 34.250 36.000 1.750 583




Valves &

Accessories


Figure RXAG Expansion Joint

Part Number


Barpsi

Amm

Inches

Bmm

Inches

RatedMovement

Lmm

Inches

SpringRate

N/mmLbs/In.

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

RXAG03425 33.7 16.0 525 88.9 +10 / -70 12.2 4.81 1.315 230 20.67 3.50 +0.39/-2.76 69.7 10.6

RXAG04232 42.4 16.0 525 101.6 +10 / -70 12.5 6.0

1 14 1.660 230 20.67 4.00 +0.39/-2.76 71.4 13.2

RXAG04840 48.3 16.0 525 114.3 +10 / -70 5.2 7.3

1 12 1.900 230 20.67 4.50 +0.39/-2.76 29.7 16.1

RXAG06050 60.3 16.0 525 114.3 +10 / -70 15.2 7.82 2.375 230 20.67 4.50 +0.39/-2.76 86.8 17.2

RXAG07365 73.0 16.0 525 127.0 +10 / -70 22.1 10.3

2 12 2.875 230 20.67 5.00 +0.39/-2.76 126.2 22.7

RXAG07665 76.1 16.0 525 127.0 +10 / -70 22.1 10.3

76,1mm 3.000 230 20.67 5.00 +0.39/-2.76 126.2 22.7

RXAG08980 88.9 16.0 525 168.3 +10 / -70 28.5 14.63 3.500 230 20.67 6.63 +0.39/-2.76 162.7 32.2

RXAG114100 114.3 16.0 525 177.8 +10 / -70 40.2 16.34 4.500 230 20.67 7.00 +0.39/-2.76 229.5 35.9

RXAG139125 139.7 16.0 525 219.1 +10 / -70 49.5 22.3

139,7mm 5.500 230 20.67 8.63 +0.39/-2.76 282.7 49.2

RXAG141125 141.3 16.0 525 219.1 +10 / -70 49.5 22.35 5.563 230 20.67 8.63 +0.39/-2.76 282.7 49.2

RXAG165150 165.1 16.0 525 273.0 +10 / -70 59.4 30.6

165,1mm 6.500 230 20.67 10.75 +0.39/-2.76 339.2 67.5

RXAG168150 168.3 16.0 525 273.0 +10 / -70 59.4 30.66 6.625 230 20.67 10.75 +0.39/-2.76 339.2 67.5

RXAG219200 219.1 16.0 525 323.9 +10 / -70 117.3 44.48 8.625 230 20.67 12.75 +0.39/-2.76 669.8 97.9

RXAG273250 273.0 16.0 525 - - - -10 10.750 230 20.67 - - - -

Note: recommended for mounting with GRINNELL Rigid couplingsFor information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Bellow

A

ODB



Valves &

Accessories

Figure ALG Expansion Joint

Part Number


Barpsi

Amm

Inches

Bmm

Inches

RatedMovement

L mmInches

SpringRate

N/mmLbs/In.

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

ALG003425 33.7 16.0 200 39 +20 / -20 14 0.41 1.315 230 7.87 1.54 +0.79/-0.79 80 0.9

ALG004232 42.4 16.0 205 46 +20 / -20 16 0.5

1 14 1.660 230 8.07 1.81 +0.79/-0.79 91 1.2

ALG004840 48.3 16.0 234 58 +25 / -25 26 0.8

1 12 1.900 230 9.21 2.28 +0.98/-0.98 148 1.7

ALG006050 60.3 16.0 276 69 +30 / -30 22 1.32 2.375 230 10.87 2.72 +1.18/-1.18 126 2.8

ALG007365 73.0 16.0 261 87 +30 / -30 24 1.6

2 12 2.875 230 10.28 3.43 +1.18/-1.18 137 3.4

ALG007665 76.1 16.0 261 87 +30 / -30 24 1.6

76,1mm 3.000 230 10.28 3.43 +1.18/-1.18 137 3.4


MATERIAL SPECIFICATIONSBellow

Pipe Ends

Internal Sleeves

A

ODB



Valves &

Accessories


Figure ANS Expansion Joint

Part Number


Barpsi

Amm

Inches

Bmm

Inches

RatedMovement

L mmInches

SpringRate

N/mmLbs/In

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

ANS008980 88.9 16.0 205 104 +20 / -20 46 1.93 3.500 230 8.07 4.09 +0.79/-0.79 263 4.1

ANS0114100 114.3 16.0 200 127 +20 / -20 49 2.44 4.500 230 7.87 5.00 +0.79/-0.79 280 5.3

ANS0139125 139.7 16.0 210 155 +25 / -25 93 3.2

139,7mm 5.500 230 8.27 6.10 +0.98/-0.98 531 7.1

ANS0141125 141.3 16.0 210 155 +25 / -25 93 3.25 5.563 230 8.27 6.10 +0.98/-0.98 531 7.1

ANS0165150 165.1 16.0 245 184 +25 / -25 83 5.0

165,1mm 6.500 230 9.65 7.24 +0.98/-0.98 474 11.0

ANS0168150 168.3 16.0 245 184 +25 / -25 83 5.06 6.625 230 9.65 7.24 +0.98/-0.98 474 11.0

ANS0219200 219.1 16.0 275 235 +25 / -25 89 8.78 8.625 230 10.83 9.25 +0.98/-0.98 508 19.1


Figure FTU Rubber Bellows ISO R7 Threaded

Part Number


Barpsi

Amm

Inches

AxialMovement

Lmm

Inches

LateralMovement

mmInches

Max.Deflection

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

FTU020E20 26.9 10.0 200 +6 / -22 +22

45°2.1

34 1.050 150 7.87 +0.24/-0.87 +0.87 4.6

FTU025E25 33.7 10.0 200 +6 / -22 +22

45°2.5

1 1.315 150 7.87 +0.24/-0.87 +0.87 5.5

FTU032E32 42.4 10.0 200 +6 / -22 +22

45°3.2

1 14 1.660 150 7.87 +0.24/-0.87 +0.87 7.1

FTU040E40 48.3 10.0 200 +6 / -22 +22

45°3.5

1 12 1.900 150 7.87 +0.24/-0.87 +0.87 7.7

Note: Max. working temperature: +90° C maximum Vacuum: 405 mm HgFor information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


Ws No 1.4541

Pipe Ends


Coupling

A

A

ODB



Valves &

Accessories

Reaction Force FSF Rubber Expansion Joints

Figure FSF Flanged Rubber Bellows

Part Number


Barpsi

FlangeDimension

Amm

Inches

AxialMovement

Δ Lmm

Inches

LateralMovement

mmInches

Max.Deflection

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

FSF0050E50 60.3 16.0

PN10/16130 +20 / -30 +20

35°3.8

2 2.375 230 5.12 +0.79 / -1.18 +0.79 8.4

FSF0065E65 76.1 16.0

PN10/16130 +20 / -30 +20

35°4.7

76,1mm 3.000 230 5.12 +0.79 / -1.18 +0.79 10.4

FSF0080E80 88.9 16.0

PN10/16130 +20 / -30 +20

35°5.1

3 3.500 230 5.12 +0.79 / -1.18 +0.79 11.2

FSF0100E100 114.3 16.0

PN10/16130 +20 / -30 +20

35°7.0

4 4.500 230 5.12 +0.79 / -1.18 +0.79 15.4

FSF0125E125 139.7 16.0

PN10/16130 +20 / -30 +20

35°8.9

139,7mm 5.500 230 5.12 +0.79 / -1.18 +0.79 19.6

FSF0150E150 165.1 16.0

PN10/16130 +20 / -30 +20

35°10.6

165,1mm 6.500 230 5.12 +0.79 / -1.18 +0.79 23.4

FSF0200E2008

219.18.625

10.0PN10

130 +20 / -30 +2035°

15.2150 5.12 +0.79 / -1.18 +0.79 33.5

FSF0250E16.0

PN16130 +20 / -30 +20

35°15.2

230 5.12 +0.79 / -1.18 +0.79 33.5

FSF0300E25010

273.010.750

10.0PN10

130 +20 / -30 +2035°

31.5150 5.12 +0.79 / -1.18 +0.79 69.4

FSF1200E16.0

PN16130 +20 / -30 +20

35°31.5

230 5.12 +0.79 / -1.18 +0.79 69.4

FSF1250E30012

323.912.750

10.0PN10

130 +20 / -30 +2035°

98.6150 5.12 +0.79 / -1.18 +0.79 217.4

FSF1300E16.0

PN16130 +20 / -30 +20

35°98.6

230 5.12 +0.79 / -1.18 +0.79 217.4

Note: Max. working temperature: 104° C (219.2°F ) maximum Vacuum: 400 mm HgFor information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

MATERIAL SPECIFICATIONSFlange

with hardened steel flange ring.

Bellow

DN30010000

kg

bar

75005000

2500

1000750

500

250

1002 3 4 5 6 10 16 20 25

DN250

DN200

DN150

DN125

DN100DN80

DN65

DN50

A



Valves &

Accessories


Specifically designed to meet the requirements of ISO 10380 7.4.2. Applications: - Static installations (connect pipe work out of alignment) - Occasional flexing - Constant flexing - Vibration (high frequency, low amplitude movement -

compressor or pump)These products are not approved for Sprinkler applications

Figure UFBX Flexible Hoses(Page 1 of 2)

MATERIAL SPECIFICATIONSHose *

Braiding *

Temperature Range

(-328°F to 1,112°F)Hose Length

3.28 feet)

* Other materials available on request

ConstructionThe hoses are annularly corrugated formed from butt weld rigid tube. Depending on the application, required working pressure and conditions of operation, a single or double layer of wire braid is applied externally to the hose to restrain it, increasing its ability to withstand the pressure, increasing hoop strength and protection from abrasion. The extent of braiding, gauge and angle of lay is calculated carefully to maximize performance.

Part Number

ISO 10380HoseType

Max.ODmmIn.

Bend Radius Maximum Pressure Approx.WeightKg/M

Lbs./Ft.DN

Nominal Pressure

PN

StaticmmIn.

FlexingmmIn.

WorkingBarpsi

TestBarpsi

BurstBarpsi

UFBX1-034 25

4 UFBX033.7 44 200 4.1 6.2 16.4 0.31.33 1.73 7.87 59.5 89.9 237.9 0.2

50 UFBX135.8 85 200 50.0 75.0 200.0 0.71.41 3.35 7.87 725.2 1,087.8 2,900.8 0.5

63 UFBX237.9 85 200 76.0 114.0 304.0 1.11.49 3.35 7.87 1,102.3 1,653.4 4,409.1 0.7

UFBX1-042 32

2.5 UFBX041.4 55 250 3.4 5.1 13.6 0.41.63 2.17 9.84 49.3 74.0 197.3 0.3

25 UFBX143.2 105 250 39.0 59.0 156.0 0.91.70 4.13 9.84 565.6 855.7 2,262.6 0.6

50 UFBX245.3 105 250 57.0 85.0 228.0 1.31.78 4.13 9.84 826.7 1,232.8 3,306.9 0.9

UFBX1-048 40

0.5 UFBX047.9 70 250 2.4 3.6 9.6 0.71.89 2.76 9.84 34.8 52.2 139.2 0.5

25 UFBX150 127 250 35.0 53.0 140.0 1.2

1.97 5.00 9.84 507.6 768.7 2,030.5 0.8

50 UFBX252.2 127 250 55.0 82.0 220.0 1.72.06 5.00 9.84 797.7 1,189.3 3,190.8 1.1

UFBX1-060 50

0.5 UFBX062.1 90 350 1.0 1.5 4.0 0.82.44 3.54 13.78 14.5 21.8 58.0 0.6

25 UFBX164.2 160 350 30.0 45.0 120.0 1.52.53 6.30 13.78 435.1 652.7 1,740.5 1.0

40 UFBX266.3 160 350 44.0 66.0 176.0 2.32.61 6.30 13.78 638.2 957.2 2,552.7 1.5

UFBX1-076 65

0.5 UFBX076.5 110 410 1.0 1.5 4.0 1.93.01 4.33 16.14 14.5 21.8 58.0 1.3

25 UFBX178.6 200 410 26.0 39.0 104.0 2.83.09 7.87 16.14 377.1 565.6 1,508.4 1.9

40 UFBX280.7 200 410 46.0 69.0 184.0 3.73.18 7.87 16.14 667.2 1,000.8 2,668.7 2.5

UFBX1-089 80

0.5 UFBX089.8 130 450 1.0 1.5 4.0 2.33.54 5.12 17.72 14.5 21.8 58.0 1.5

20 UFBX191.9 230 450 22.0 33.0 88.0 3.43.62 9.06 17.72 319.1 478.6 1,276.3 2.3

40 UFBX294.1 230 450 40.0 60.0 160.0 4.53.70 9.06 17.72 580.2 870.2 2,320.6 3.0

DOUBLE BRAIDED

UFBX2SINGLE BRAID

UFBX1 UNBRAIDED

UFBX0



Valves &

Accessories

Figure UFBX Flexible Hoses(Page 2 of 2)

Design

twisting. Keep flexing in one plane.

Shock Pressure

considerably affect hose longevity and if encountered, peak pressure must not

pressure.

Pressure LossTo achieve the same pressure loss as in steel pipes, the diameter of the corrugated hose should be increased

Design and Installation ConsiderationsFlexing is usually in accordance with one or a combination of the types of motion shown. The flex calculations help determine the length of hose required to prevent flexing below the minimum bend radius, thereby ensuring maximum reliability. Contact

assistance with this calculation.

Vertical Loop - Horizontal Travel

Vertical Loop - Vertical Travel

UFBX Length Calculations

These drawings illustrate different length calculations necessary; Offset or

M

R

C

L

M

R

L

R

M M

L

Part Number

ISO 10380HoseType

Max.ODmmIn.

Bend Radius Maximum Pressure Approx.WeightKg/M

Lbs./Ft.DN

Nominal Pressure

PN

StaticmmIn.

FlexingmmIn.

WorkingBarpsi

TestBarpsi

BurstBarpsi

UFBX1-114 100

0.5 UFBX0126 200 560 0.7 1.0 2.8 2.84.96 7.87 22.05 10.0 15.1 40.6 1.9

16 UFBX1129 230 560 18.4 27.6 73.6 4.65.08 9.06 22.05 266.9 400.3 1,067.5 3.1

25 UFBX2132 230 560 33.0 49.5 132.0 6.45.20 9.06 22.05 478.6 717.9 1,914.5 4.3

UFBX1-139 125

0.5 UFBX0151 250 710 0.7 1.0 2.8 4.75.94 9.84 27.95 10.0 15.1 40.6 3.2

10 UFBX1153 280 710 11.5 17.3 46.0 6.66.02 11.02 27.95 166.8 250.9 667.2 4.4

20 UFBX2156 280 710 20.7 31.0 82.8 8.56.14 11.02 27.95 300.2 449.6 1,200.9 5.7

UFBX1-168 150

0.5 UFBX0178 290 815 0.6 0.8 2.2 5.57.01 11.42 32.09 8.0 12.0 31.9 3.7

10 UFBX1180 320 815 11.2 16.8 44.8 7.77.09 12.60 32.09 162.4 243.7 649.8 5.2

20 UFBX2183 320 815 20.0 30.0 80.0 9.97.20 12.60 32.09 290.1 435.1 1,160.3 6.7

UFBX1-219 200

- UFBX0232 40 1015 0.3 0.5 1.2 7.39.13 1.57 39.96 4.5 6.7 18.0 4.9

6 UFBX1235 435 1015 7.0 11.0 28.0 10.09.25 17.13 39.96 101.5 159.5 406.1 6.7

10 UFBX2237 435 1015 10.0 15.0 40.0 13.09.33 17.13 39.96 145.0 217.6 580.2 8.7

UFBX1-273 250

- UFBX0287 490 1220 0.3 0.4 1.0 9.2

11.30 19.29 48.03 3.6 5.4 14.5 6.2

6 UFBX1292 560 1220 9.6 14.4 38.4 14.7

11.50 22.05 48.03 139.2 208.9 556.9 9.9

- UFBX2- - - - - - -

Note: The values given above are for factory braided and assembled units and are given as an aid to hose selection. For unbraided applications or if the hose is to form an assembly used at the extreme of one or more of the characteristics below, please discuss the application with our application engineering department.


Offset or Lateral Movement



Valves &

Accessories


Figure HERCULES Fix Point

FMAX

GH

B

L

D

W

2X

FAZ

D1

SW T

Part Number NominalSizeDNIn.

FmaxkNlbs

Dimensions - mm In.

Type (2 Required)

SWmmIn.

TNm

Lbf/FtT < +120° C T < +220° CH

mmIn.

WmmIn.

LmmIn.

BmmIn.

D1mmIn.

1501151 150215115 5 72 140 120 115 74

FAZ II 12/105 15

- 1,124 2.83 5.51 4.72 4.53 2.91 0.20 1.03

1501181 150218118 5 72 140 120 115 74

FAZ II 12/105 15

38 1,124 2.83 5.51 4.72 4.53 2.91 0.20 1.03

1501221 150222122 5 72 140 120 115 74

FAZ II 12/105 15

12 1,124 2.83 5.51 4.72 4.53 2.91 0.20 1.03

1501281 150228128 5 72 140 120 115 74

FAZ II 12/105 15

34 1,124 2.83 5.51 4.72 4.53 2.91 0.20 1.03

1501352 150235235 5 85 140 140 135 92

FAZ II 12/105 15

1 1,124 3.35 5.51 5.51 5.31 3.62 0.20 1.03

1501422 150242242 5 85 140 140 135 92

FAZ II 12/105 15

1 14 1,124 3.35 5.51 5.51 5.31 3.62 0.20 1.03

1501483 150248348 8 100 160 175 170 125

FAZ II 16/256 30

1 1 2 1,798 3.94 6.30 6.89 6.69 4.92 0.24 2.06

1501543 150254354 8 100 160 175 170 125

FAZ II 16/256 30

- 1,798 3.94 6.30 6.89 6.69 4.92 0.24 2.06

1501573 150257357 8 100 160 175 170 125

FAZ II 16/256 30

- 1,798 3.94 6.30 6.89 6.69 4.92 0.24 2.06

1501603 150260360 8 100 160 175 170 125

FAZ II 16/256 30

2 1,798 3.94 6.30 6.89 6.69 4.92 0.24 2.06

1501764 150276476 11 115 180 205 190 150

FAZ II 16/256 30

2 12 2,473 4.53 7.09 8.07 7.48 5.91 0.24 2.06

1501894 150289489 11 115 180 205 190 150

FAZ II 16/256 30

3 2,473 4.53 7.09 8.07 7.48 5.91 0.24 2.06

1501145 1502145114 10 158 200 280 260 205

FAZ II 16/258 60

4 2,248 6.22 7.87 11.02 10.24 8.07 0.31 4.11

1501405 1502405140 10 158 200 280 260 205

FAZ II 16/258 60

5 2,248 6.22 7.87 11.02 10.24 8.07 0.31 4.11

1501686 1502686150 30 310 200 355 - 275

FAZ II 20/60- -

6 6,744 12.20 7.87 13.98 - 10.83 - -

1501197 1502197200 30 330 200 404 - 324

FAZ II 20/60- -

8 6,744 12.99 7.87 15.91 - 12.76 - -

150738 1502738250 30 370 200 487 - 407

FAZ II 20/60- -

10 6,744 14.57 7.87 19.17 - 16.02 - -




Valves &

Accessories

Figure FAZ II Anchor

Part Number Type Thread Size

Anchor Length

LmmIn.

Max. Fixture Thickness

TmmIn.

Drill Hole Diameter

mmIn.

Effective Anchor Depth

HmmIn.

Approx.Weight

Kg.Lbs.

1761201 FAZ II 12/10 M12110 10 12 70 0.0964.33 0.39 0.47 2.76 0.212

1761602 FAZ II 16/25 M16148 25 16 85 0.2235.83 0.98 0.63 3.35 0.491

1772003 FAZ II 20/60 M20202 60 20 100 0.4217.95 2.36 0.79 3.94 0.928


L

HT

Cone BoltExpansion

SleeveHexagon Nut

and Washer

Description

is pulled into the expansion clip and expands it against the drill hole wall.

corrosion-resistance class III e.g. A4 for outdoor applications and for damp rooms.

Advantages/benefits

distribution for high loads and small edge distances and axial spacings with filigree building components as well as secure expansion even in cracked concrete.

necessary to apply the torque.

Note: FAZ II Anchor is suitable only for concrete with Rck ≥ 25 N/mm2.



Valves &

Accessories


Figures 407GT & 407T Dielectric WaterwaysTech Data Sheet: G465

Clearflow* Fittings protect plumbing systems through an innovative steel-to-plastic design that establishes a dielectric waterway. The dielectric fittings separate dissimilar metals in the electrolyte (waterway), eliminating the local galvanic cell.

The Clearflow Fittings metal-to-metal joint design maintains external electrical continuity, thereby preventing stray current corrosion. This feature is critical when stray current is present due to intentional or non-intentional grounding of direct current (DC) sources, such as phone systems and appliances.

Fittings meet the requirements of ASTM D 4140 for continuous use at temperatures up to 110°C (230°F).

Test data/results and listings by Pittsburgh Testing Laboratory can be provided upon request. Contact a GRINNELL Sales Representative

Figure 407GTDielectric Waterway

Figure 407TDielectric Waterway

* Clearflow is a Registered Trademark of Perfection Corp.

E to E E to E

Pipe Size Figure 407GTGrooved x Male Thread

Figure 407TMale Thread x Male Thread

Nominal mm

Inches

O.D.mm

Inches

Part Number

End to Endmm

Inches

Approx.Weight

kgLbs.

Part Number

End to Endmm

Inches

Approx.Weight

kgLbs.

15 21.3–

– –407T000212

76.2 0.1 1

2 0.840 – – 3.0 0.2

20 26.9–

– –407T000262

76.2 0.1 3

4 1.050 – – 3.0 0.2

25 33.7 101.6 0.1407T000342

101.6 0.11 1.315 4.0 0.3 4.0 0.3

32 42.4407GT00422

101.6 0.3407T000422

101.6 0.31 1

4 1.660 4.0 0.6 4.0 0.6

40 48.3407GT00482

101.6 0.4407T000482

101.6 0.41 1

2 1.900 4.0 0.8 4.0 0.8

50 60.3407GT00602

101.6 0.5407T000602

101.6 0.52 2.375 4.0 1.0 4.0 1.0

65 73.0407GT00732

152.4 0.7407T000732

152.4 0.72 1

2 2.875 6.0 1.6 6.0 1.6

80 88.9407GT00892

152.4 0.9407T000892

152.4 0.93 3.500 6.0 2.0 6.0 2.0

100 114.3407GT01142

152.4 2.0407T001142

152.4 2.04 4.500 6.0 4.5 6.0 4.5

For information on alternative sizes, contact a GRINNELL Sales Representative.See fitting specifications on page 51.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

STAINLESS STEEL SYSTEMS

139

www.grinnell.com


Stainless

Steel


Stainless Steel Systems Table of Contents


Figure 472Stainless Steel

Rigid CouplingsPage 142

Figure SS-7XStainless Steel

Rigid Couplings (Large Diameter)

Page 143

Figure 405Stainless Steel


SS-8XStainless Steel Heavy Duty

Flexible CouplingPage 145

SS-1200Stainless Steel High Pressure


Figure 705RRilsan Coated

Flexible CouplingPage 147

SS-28Stainless Steel

Hinged Lever CouplingPage 148

Figure SS-41Flange Adapters

(ANSI Class 150#) Page 154

Figure 443 & 444Flange Adapters

(PN16/PN10 BS 4504) Page 155

Figure 410Stainless Steel 90° Elbows

Page 149

Figure 401Stainless Steel 45° Elbows

Page 149

Figure 419Stainless Steel Tees

Page 150

Figure 460Stainless Steel End Caps

Page 151

Figure 421Stainless Steel Reducing Tees

Page 152

Figure 450Stainless Steel Concentric

ReducersPage 153

Figure SJ-400Butterfly Valve

Pages 156 - 157

Figure SJ-600LBall ValvePage 158

Figure SJ-600WBall ValvePage 159

Figure SJ-630Three Port Ball Valve

Page 160

Figure SJ-726Y StrainerPage 161

Figure SS-723Mechanical Tee

Page 162



Stainless

Steel

141

MATERIAL SPECIFICATIONSStainless Steel Housing Specifications

specification for castings, iron-chromium,

for general application Grade CR-8M.

(70,000 psi)

(30,000 psi)

(2") minimum 30%

Bolt/Nut Specifications

conforming to ASTM A 193M Class 2, Type 316 Grade B8M

conforming to ASTM A 194M, Type 316, Grade 8M


code stripe identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F) plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.

gaskets have a Yellow and Green colour code stripe identification and are NSF-61 approved for cold and hot portable water up to 82°C (180°F).

gaskets have an Orange colour code stripe identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C (-20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapors.

gaskets are Red colour code stripe and conform to ASTM D 2000 for service temperatures from -34°C to 177°C ( -30°F to 350°F). They are recommended for air without hydrocarbons, or dry heat.

gaskets have a Blue colour code stripe and conform to ASTM D 2000. They are recommended for oxidizing acids, petroleum products, hydraulic fluids, lubricants, and halogenated hydrocarbons.

Fitting SpecificationsTech Data Sheet: G570

Coupling Specifications


ASTM A 312, Schedule 10 and Schedule 40

ASTM A 403 WPW or A 403 CR

steel fittings are"

4.0mm (0.16") for 250 to 300mm (10" and 12"). Fittings are fabricated from SS316Ti / 1.4571

Fittings are available in full-flow and fabricated versions in 304 and 316L S.S. Fabricated fittings are available with Schedule 10 or Schedule 40 wall thickness.

For pressure ratings of fittings, refer to data sheet G570.

For local country potable water approvals, contact a GRINNELL Sales Representative.




www.grinnell.com


Stainless

Steel


Figure 472 Stainless Steel Rigid CouplingsTech Data Sheet: G560

The GRINNELL Figure 472 Rigid Coupling is made of cast 316L stainless steel and is capable of pressure up to 41.4 Bar (600 psi).

The GRINNELL Figure 472 Patented Coupling universal tongue-and-groove design allows the housing to grip along the full 360° of circumference of the pipe. Sizes 32mm – 100mm (1 1⁄4" – 4") have gripping teeth to prevent rotation during installation.

BC

A

Part Number

Pipe SizeMax.†

PressuresBarpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap Inches

mmInches

DimensionsCoupling Bolts

Size** mm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

472MD0042432 42.4 41.4 5.78 1.5 69.9 111.3 46.0 M10 x 57 0.9

1 14 1.660 600 1,298.5 0.06 2.75 4.38 1.81 3

8 x 2 14 2.0

472MD0048440 48.3 41.4 7.57 2.0 76.2 117.3 46.0 M10 x 57 1.0

1 12 1.900 600 1,701.1 0.08 3.00 4.62 1.81 3

8 x 2 14 2.1

472MD0060450 60.3 41.4 11.82 3.3 86.6 130.0 47.8 M10 x 57 0.92 2.375 600 2,658.0 0.13 3.41 5.12 1.88 3

8 x 2 14 1.9

472MD0073465 73.0 41.4 17.32 3.3 99.3 143.0 47.8 M10 x 57 1.5

2 12 2.875 600 3,895.0 0.13 3.91 5.63 1.88 3

8 x 2 14 3.2

472MD0076465 76.1 41.4 18.86 3.3 106.4 145.3 50.8 M10 x 57 1.6

76,1mm 3.000 600 4,241.0 0.13 4.19 5.72 2.00 – 3.5

472MD0089480 88.9 41.4 25.68 3.3 117.6 158.8 47.8 M12 x 89 1.63 3.500 600 5,772.5 0.13 4.63 6.25 1.88 1

2 x 3 3.5

472MD01144100 114.3 41.4 42.44 4.8 147.6 190.5 50.0 M12 x 89 2.54 4.500 600 9,542.3 0.19 5.81 7.50 1.97 1

2 x 3 5.6

472MD01394125 139.7 41.4 63.40 4.8 178.3 246.9 52.3 M16 x 83 3.9

139,7mm 5.500 600 14,254.6 0.19 7.02 9.72 2.06 – 8.5

472MD01414125 141.3 41.4 64.87 4.8 180.1 246.6 51.8 M16 x 83 3.95 5.563 600 14,583.0 0.19 7.09 9.71 2.04 5

8 x 3 14 8.5

472MD01684150 168.3 41.4 92.00 4.8 205.5 267.5 54.1 M16 x 83 4.36 6.625 600 20,682.4 0.19 8.09 10.53 2.13 5

8 x 3 14 9.4

472MD02194200 219.1 41.4 155.92 4.8 268.2 344.4 66.5 M20 x 121 8.88 8.625 600 35,054.7 0.19 10.56 13.56 2.62 3

4 x 4 34 19.4

472MD02734250 273.0 41.4 242.22 3.3 326.1 416.8 66.5 – 14.510 10.750 600 54,455.9 0.13 12.84 16.41 2.62 1 x 6 1

2 32.0

472MD03244300 323.9 41.4 340.73 3.3 391.4 478.5 66.5 – 19.512 12.750 600 76,603.5 0.13 15.41 18.84 2.62 1 x 6 1

2 43.0

Figure 472 Rigid Couplings have an Anti-Rotation Feature of “gripping teeth” along the coupling keys in sizes 1 1⁄4" - 4" (32mm - 100mm ), making the Figure 472 perfectly suited for installations where the likelihood of rotation is greatest.

* Maximum available gap between pipe ends. Minimum gap = 0.† Maximum Pressure and End Load are total from all loads based on standard weight stainless steel pipe. Pressure ratings and end loads

may differ for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details.‡ Max end gap is for cut grooved standard weight stainless steel pipe. Values for roll grooved pipe will be half that of cut grooved.** Contact a GRINNELL Sales Representative for availability of inch bolt sizes vs. metric bolt sizes.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 141 for stainless steel coupling specifications and pages 234 - 245 for gasket information.Refer to pressure ratings for Schedule 5, 10, and 40 pipe on pages 262 - 265, or contact a GRINNELL Sales Representative.Note: The Fig. 472 Stainless Steel Heavy Duty Rigid Coupling does not provide compensation for pipe system expansion and/or

contraction associated with pipe system temperature changes.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



Stainless

Steel

143

Shurjoint Figure SS-7X Stainless Steel Rigid Couplings (Large Diameter)

Shurjoint Tech Data Sheet: K-02

The Shurjoint Model SS-7X is a tongue and groove rigid coupling designed to provide a rigid joint for stainless steel pipe in sizes 250 to 600mm (10” to 24”). The SS-7X is supplied standard in CF8 (304) and CF8M (316) with 304 and 316 bolts and nuts. The bolts must be fastened to the required torque for proper installation.


NominalSizemm

Inches

PipeO. D.mm

Inches

Pipe EndSeparation

mmInches

Dimensions - mm Inches Bolt Approx.Weight

kgLbs.

A B C No. Sizein

250 273.0 0-3.2 318 406 652 7

8 x 6 12

10.510 10.750 0-0.13 12.52 15.98 2.56 23.1

300 323.9 0-3.2 374 452 652 7

8 x 6 12

11.512 12.750 0-0.13 14.72 17.78 2.56 23.3

350 355.6 0-3.2 397 500 752 7

8 x 6 12

15.014 14.000 0-0.13 15.63 19.69 2.95 33.0

400 406.4 0-3.2 461 536 756 7

8 x 3 12

19.416 16.000 0-0.13 18.15 21.10 2.95 42.7

450 457.2 0-3.2 514 587 756 7

8 x 3 12

25.018 18.000 0-0.13 20.24 23.11 2.95 55.0

500 508.0 0-3.2 571 669 798 3

4 x 4 34

33.120 20.000 0-0.13 22.48 26.34 3.11 72.8

550 558.8 0-3.2 622 720 798 3

4 x 4 34

33.022 22.000 0-0.13 24.49 28.35 3.11 72.6

600 609.6 0-3.2 673 771 798 3

4 x 4 34

34.724 24.000 0-0.13 26.47 30.35 3.11 76.3


See page 141 for stainless steel coupling specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Nom. Rating Working Pressure (S40S, Roll-grooved)


Class 150 20 Bar @38°C300 psi @100°F



* The working pressure shown is based on roll-grooved Sch. 10S pipe. For other pipe schedules and cut-grooved pipe, see page 76 Performance Data Sheet.

* Proof test pressure: 1.5 times the working pressure, non-shock cold water. * Burst pressure is engineered minimum 2 times the working pressure.

B C

A

BC

A

BC

A

250 – 350mm (10" – 14" ) 400 – 450mm (16" – 18" ) 500 – 600mm (20" – 24" )

www.grinnell.com


Stainless

Steel


The GRINNELL Figure 405 Flexible Coupling is made of 316L stainless steel and is capable of pressures up to 51.7 Bar (750 psi), depending on pipe size and wall thickness.

B C

A

Figure 405 Stainless Steel Flexible CouplingsTech Data Sheet: G565

Part Number


Barpsi

Max.†End Load

kNLbs.

Max.*‡ End Gap

mmInches

Deflection ‡ Dimensions Coupling Bolts Size** (Qty. 2)mm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Degreesper

coupling

mm/mIn/Ft

Amm

Inches

B mm

Inches

Cmm

Inches

405MD0034425 33.7 51.7 4.53 3.3

5° 26'95.1 56.0 97.0 46.0 M10 x 57 0.6

1 1.315 750 1,018.6 0.13 0.90 2.20 3.82 1.81 38 x 2 1

4 1.5

405MD0042432 42.4 51.7 7.22 3.3

4° 19'75.0 65.0 106.4 46.0 M10 x 57 0.7

1 14 1.660 750 1,623.1 0.13 0.90 2.56 4.19 1.81 3

8 x 2 14 1.5

405MD0048440 48.3 51.7 9.46 3.3

3° 46'65.8 69.9 112.8 46.0 M10 x 57 0.7

1 12 1.900 750 2,126.4 0.13 0.79 2.75 4.44 1.81 3

8 x 2 14 1.6

405MD0060450 60.3 34.5 9.85 3.3

3° 1'52.5 82.6 124.0 47.8 M10 x 57 0.8

2 2.375 500 2,215.0 0.13 0.63 3.25 4.88 1.88 38 x 2 1

4 1.7

405MD0073465 73.0 34.5 14.44 3.3

2° 29'43.3 93.7 139.7 47.8 M10 x 57 0.9

2 12 2.875 500 3,245.8 0.13 0.52 3.69 5.50 1.88 3

8 x 2 14 2.0

405MD0076465 76.1 34.5 15.72 3.3

2° 23'41.7 101.6 146.10 47.8 M12 x 89 1.4

76,1mm 3.000 500 3,534.2 0.13 0.50 4.00 5.75 1.88 – 3.1

405MD0089480 88.9 34.5 21.40 3.3

2° 3'35.8 111.3 165.1 47.8 M12 x 89 1.4

3 3.500 500 4,810.4 0.13 0.43 4.38 6.50 1.88 12 x 3 3.1

405MD01144100 114.3 22.4 22.99 6.4

3° 11'55.8 144.5 196.9 52.3 M12 x 89 1.8

4 4.500 325 5,168.7 0.25 0.67 5.69 7.75 2.06 12 x 3 4.0

405MD01394125 139.7 13.8 21.13 6.4

2° 36'45.5 173.0 247.7 52.3 M16 x 83 3.3

139,7mm 5.500 200 4,751.5 0.25 0.55 6.81 9.75 2.06 – 7.2

405MD01414125 141.3 13.8 21.62 6.4

2° 35'45.0 174.8 247.7 52.3 M16 x 83 3.2

5 5.563 200 4,861.0 0.25 0.54 6.88 9.75 2.06 58 x 3 1

4 7.1

405MD01684150 168.3 13.8 30.67 6.4

2° 10'37.5 201.7 271.5 52.3 M16 x 83 3.2

6 6.625 200 6,894.1 0.25 0.45 7.94 10.69 2.06 58 x 3 1

4 7.1

405MD02194200 219.1 13.8 51.97 6.4

1° 40'29.2 258.8 344.4 63.5 M20 x 121 6.6

8 8.625 200 11,684.9 0.25 0.35 10.19 13.56 2.50 34 x 4 3

4 14.5

Values for roll grooved pipe will be half that of cut grooved.* Maximum available gap between pipe ends. Minimum gap = 0.† Maximum Pressure and end load are total from all loads based on standard weight stainless steel pipe. Pressure ratings and end loads

may differ for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. ‡ Max End Gap and Deflection is for cut grooved standard weight stainless steel pipe. ** Contact a GRINNELL Sales Representative for availability of inch bolt sizes vs. metric bolt sizes.For information on alternative sizes, contact a GRINNELL Sales Representative.See page 141 for stainless steel coupling specifications and pages 234 - 245 for gasket information.For fire protection equipment listing and approval pressure ratings contact Tyco FPP.Refer to pressure ratings for Schedule 5, 10, and 40 pipe on pages 262 - 265, or contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



Stainless

Steel

145

The Shurjoint Model SS-8X is designed for high pressure applications including reverse osmosis and desalination systems. The SS-8X is available in Duplex CD3MN (2205), Super Duplex CE8MN, CE3MN (2507) and 6-Moly stainless steel CK3MCuN (254SMO*). The SS-8X features 316 bolts, washers and Silicon Bronze nuts to help prevent galling during repetitive use.

The SS-8X is also available in CF8M (316) with 316 bolts and nuts. contact GRINNELL for details. * 254SMO is a registered trademark of AvestaPolarit AB.

NominalSizemm

Inches

PipeO. D.mm

Inches

Pipe EndSeparation

mmInches

DimensionsDeflection

Degree( ° )

BoltSize

Inches

Approx.Weight

kgLbs.

Amm

Inches

Bmm

Inches

Cmm

Inches20 26.9 0 - 1.6 56.0 95.0 46.0

3° - 23’ 38 x 2

0.7 3

4 1.050 0 - 0.06 2.20 3.75 1.81 1.525 33.7 0 - 1.6 63.0 99.0 46.0

2° - 45’ 38 x 2

0.81 1.315 0 - 0.06 2.45 3.91 1.81 1.832 42.4 0 - 1.6 72.0 111.0 46.0

2° - 10’ 38 x 2

0.91 1

4 1.660 0 - 0.06 2.82 4.37 1.81 2.040 48.3 0 - 1.6 78.0 123.0 46.0

1° - 54’ 38 x 2

1.01 1

2 1.900 0 - 0.06 3.06 4.82 1.81 2.250 60.3 0 - 1.6 88.0 134.0 47.0

1° - 31’ 38 x 2

1.22 2.375 0 - 0.06 3.46 5.28 1.85 2.6

65 73.0 0 - 1.6 153.0 103.0 47.01° - 15’ 3

8 x 21.3

2 12 2.875 0 - 0.06 6.02 4.06 1.85 2.9

80 88.9 0 - 1.6 120.0 171.0 47.01° - 02’ 1

2 x 31.8

3 3.500 0 - 0.06 4.71 6.74 1.85 4.0

100 114.3 0 - 3.2 152.0 201.0 52.01° - 36’ 1

2 x 32.4

4 4.500 0 - 0.13 5.98 7.90 2.03 5.3125 141.3 0 - 3.2 181.0 249.0 53.0

1° - 18’ 58 x 3 1

23.5

5 5.563 0 - 0.13 7.13 9.80 2.09 7.7150 168.3 0 - 3.2 208.0 276.0 53.0

1° - 05’ 58 x 3 1

24.0

6 6.625 0 - 0.13 8.19 10.85 2.09 8.8200 219.1 0 - 3.2 267.0 341.0 62.0

0° - 50’ 34 x 4 3

46.8

8 8.625 0 - 0.13 10.53 13.43 2.44 15.0

200 JIS216.3 0 - 3.2 264.0 338.0 62.0

0° - 51’ 34 x 4 3

46.5

8.516 0 - 0.13 10.39 13.31 2.44 14.3

Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with ASME Section VIII Division 1 pressure vessel test methods.



Size Nom. Rating

Working Pressure(S40S, Cut-grooved)

Test Pressure(Hydrostatic)


20 - 100 3

4" – 4"CWP 97 Bar @38°C

1400 psi @100°F145 Bar2100 psi


125 - 2005" – 8"

CWP 70 Bar @38°C1000 psi @100°F

103 Bar1500 psi


*Working pressure is based on cut-grooved Sch. 40S or 80S pipe only. *Burst pressure is engineered minimum 2 times the working pressure.


Shurjoint SS-8X Stainless Steel Heavy Duty Flexible Coupling


BC

A

www.grinnell.com


Stainless

Steel



Fast-Fit Gasket:Easy installation with a

single hand

The Shurjoint Model SS-1200 is designed for high pressure applications including reverse osmosis, desalination and other specialty systems. The SS-1200 is available in strong and anti-corrosive alloys of Duplex CD3MN (2205), Super Duplex CE8MN, CE3MN (2507) and 6-Moly stainless steel CK3MCuN (254SMO*). The SS-1200 features 316 bolts, washers and Silicon Bronze nuts to help prevent galling during repetitive use.

The Fast-Fit gasket has been designed and engineered for easier and faster installations. The pipe-end friendly design eliminates struggling to stretch the gasket over the pipe ends and the Fast-Fit gasket also features Shurjoint’s Gap-Seal technology, which seals the gap between the pipe ends and eliminates stagnant water pockets within the gasket cavity. The Fast-Fit gasket is UL classified in accordance with ANSI/NSF 61 for potable water (Cold Water 30°C (86°F) / and Hot Water 82°C (180°F).

Always use the factory supplied Shurjoint Fast-Fit gasket. Performance standards do not support the use of a standard gasket in the SS-1200 coupling.* 254SMO is a registered trademark of AvestaPolarit AB.

Always use the Fast-fit gasket. Don't use a standard gasket with the SS-1200 coupling.

Pipe Size Pipe EndSeparation

mmInches

Dimensions - mm InchesDeflection

Degree( ° )

CouplingBolt Size

(Qty 2) mmInches

ApproxWeight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C

20 26.9 0 - 1.6 53 94 463° - 23’ 3

8 x 20.45

34 1.050 0 - 0.06 2.09 3.70 1.81 0.99

25 33.7 0 - 1.6 60 101 462° - 45’ 3

8 x 20.55

1 1.315 0 - 0.06 2.36 3.98 1.81 1.21

32 42.4 0 - 1.6 70 111 462° - 10’ 3

8 x 20.63

1 14 1.660 0 - 0.06 2.76 4.37 1.81 1.39

40 48.3 0 - 1.6 76 117 461° - 54’ 3

8 x 20.70

1 12 1.900 0 - 0.06 2.99 4.61 1.81 1.54

50 60.3 0 - 1.6 88 137 491° - 31’ 1

2 x 31.04

2 2.375 0 - 0.06 3.46 5.39 1.85 2.29

65 73.0 0 - 1.6 102 151 491° - 15’ 1

2 x 31.38

2 12 2.875 0 - 0.06 4.02 5.94 1.85 3.04

80 88.9 0 - 1.6 119 168 491° - 02’ 1

2 x 31.55

3 3.500 0 - 0.06 4.69 6.61 1.85 3.41

100 114.3 0 - 3.2 152 207 521° - 36’ 5

8 x 3 12

2.134 4.500 0 - 0.13 5.98 8.15 2.03 4.69

Working pressure ratings are based upon generally accepted pressure piping design standards and testing in accordance with ASME Section VIII Division 1 pressure vessel test methods.



Shurjoint SS-1200 Stainless Steel High Pressure Flexible CouplingsShurjoint Tech Data Sheet: K-17

Nom. Rating

Working Pressure (S40S, Roll-grooved)

Test Pressure(Hydrostatic)


CWP 84 Bar @38°C1200 psi @100°F

126 Bar1800 psi



*Working pressure is based on cut-grooved Sch. 40S or 80S pipe only. *Burst pressure is engineered minimum 2 times the working pressure.

A

B C

Housings:

A890 Grade 5A

Grade 4A



Stainless

Steel

147

Part Number

Pipe Size Max. WkPressure †

BarPsi

Max.End

Load †kNLbs

Max. EndSeparation ‡

mmInches

Deflection Dimensions CouplingBolt Size

(Qty 2) mmInches

ApproxWeight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

PerCouplingDegrees

Pipemm/min/ft

Amm

Inches

Bmm

Inches

Cmm

Inches

705MES042R32 42.4 16.0 2.21 3.3

4° 19'75.0 65 106 46

M10x600.7

1 14 1.660 230 496.8 0.13 0.90 2.56 4.17 1.81 1.5

705MES048R40 48.3 16.0 2.90 3.3

3° 46'65.8 70 113 46

M10x600.7

1 12 1.900 230 651.9 0.13 0.79 2.76 4.45 1.81 1.5

705MES060R50 60.3 16.0 4.53 3.3

3° 01'52.5 83 124 48

M10x600.8

2 2.375 230 1,018.4 0.13 0.63 3.27 4.88 1.89 1.8

705MES076R65 76.1 16.0 7.23 3.3

2° 23'41.7 102 146 48

M12x801.4

76,1mm 3.000 230 1,625.4 0.13 0.50 4.02 5.75 1.89 3.1

705MES089R80 88.9 16.0 9.84 3.3

2° 03'35.8 111 165 48

M12x801.4

3 3.500 230 2,212.1 0.13 0.43 4.37 6.50 1.89 3.1

705MES114R100 114.3 16.0 16.27 6.4

3° 11'55.8 145 197 52

M12x801.8

4 4.500 230 3,657.6 0.25 0.67 5.71 7.76 2.05 4.0

705MES139R125 139.7 16.0 24.31 6.4

2° 36'45.0 173 248 52

M16x903.3

139.7mm 5.500 230 5,465.1 0.25 0.54 6.81 9.76 2.05 7.3

705MES141R125 141.3 16.0 24.87 6.4

2° 35'45.0 175 248 52

M16x903.2

5 5.563 230 5,591.0 0.25 0.54 6.89 9.76 2.05 7.1

705MES165R150 165.1 16.0 33.95 6.4

2° 12'38.3 197 272 52

M16x903.2

165.1mm 6.500 230 7,632.3 0.25 0.46 7.76 10.71 2.05 7.1

705MES168R150 168.3 16.0 35.27 6.4

2° 10'37.5 202 272 52

M16x903.2

6 6.625 230 7,929.0 0.25 0.45 7.95 10.71 2.05 7.1

705MES219R200 219.1 16.0 59.78 6.4

1° 40'29.2 259 344 64

M20x1206.6

8 8.625 230 13,439.1 0.25 0.35 10.20 13.54 2.52 14.6

†: Maximum pressure and end load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ on pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. For fire protection equipment listing and approval pressure ratings contact a GRINNELL Sales Representative..

‡: Maximum pipe end separation is for cut grooved standard weight pipe. Values for roll grooved will be 1⁄ 2 that of cut grooved. Standard Stainless Steel 316 Bolt, Nuts and Washer.

Standard Stainless Steel 316 Bolt, Nuts and Washer. Always use washers in combination with Fig 705R Rilsan Coated CouplingsBecause of the Rilsan coating FM/UL/VDS/LPC approvals do not apply.Also available with zinc plated bolts and nuts. Part code: 705ME...R (e.g. 705ME114R)See page 141 for stainless steel coupling specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Figure 705R Rilsan Coated Flexible Coupling

A

B C

www.grinnell.com


Stainless

Steel


The Shurjoint Model SS-28 Hinged Grooved Coupling is designed for quick connect and disconnect services. The housing segments are hinged with a lever handle for easy assembly. Use of the split pin can prevent the accidental opening of the coupling. The Model SS-28 can be used in a wide variety of applications with standard roll- or cut- grooved pipe. Housings 40mm - 100mm (1

1⁄2”- 4”) feature a smooth outer surface, housings 125mm - 300mm (5”- 12”) feature a cross-ribbed design for added strength. Standard gasket: Grade “E” EPDM or Grade “T” Nitrile. Available standard in CF8 (304) or CF8M (316).


Expansion Pipe

Lever handles are factory assembled tight for safety. The use of an expansion pipe will aid the easy opening and closing. Expansion pipes are available upon request.


BarPSI

AxialDisplacement

mmInches

Dimensions - mm InchesDeflection

Degree( ° )

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C

40 48.3 20 0 – 1.6 75 118 473º - 48'

1.01 1

2 1.900 300 0 – 0.06 2.95 4.65 1.85 2.250 60.3 20 0 – 1.6 86 121 48

3º - 31'1.1

2 2.375 300 0 – 0.06 3.39 4.76 1.89 2.465 73.0 20 0 – 1.6 92 150 48

2º - 30'1.4

2 12 2.875 300 0 – 0.06 3.62 5.91 1.89 3.1

65 76.1 20 0 – 1.6 92 150 482º - 24'

1.476.1mm 3.000 300 0 – 0.06 3.62 5.91 1.89 3.1

80 88.9 20 0 – 1.6 119 163 482º - 24'

1.83 3.500 300 0 – 0.06 4.69 6.42 1.89 4.0

100 114.3 20 0 – 3.2 165 205 52 3º - 12'

2.74 4.500 300 0 – 0.13 6.50 8.07 2.05 5.9

125 139.7 20 0 – 3.2 189 253 522º - 37'

4.9139.7mm 5.500 300 0 – 0.13 7.44 9.96 2.05 10.8

125 141.3 20 0 – 3.2 189 253 522º - 36'

4.95 5.563 300 0 – 0.13 7.44 9.96 2.05 10.8

150 165.1 20 0 – 3.2 213 278 522º - 14'

5.8165.1mm 6.500 300 0 – 0.13 8.39 10.94 2.05 12.8

150 168.3 20 0 – 3.2 216 281 522º - 10'

5.86 6.625 300 0 – 0.13 8.50 11.06 2.05 12.8

*Deflection or angular movement is the maximum value that a coupling allows under no internal pressure.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. See page 141 for stainless steel coupling specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Shurjoint SS-28 Stainless Steel Hinged Lever CouplingShurjoint Tech Data Sheet: K-21

Nom. Rating

Working Pressure (STD, Roll-grooved)


Class 150

20 Bar @38°C300 psi @100°F



*Working pressure is based on cut-grooved Sch. 40S or 80S pipe only.


B C

SplitPin

SplitPin

A

Locking Lever Handle:

A 743 Gr. CF8

Toggle Links, Hinge Pin, & Rivet:

Split Pin:



Stainless

Steel

149

Shurjoint Figure SS-41 Flange Adapters (ANSI Class 150#)

Shurjoint Tech Data Sheet: K-08The Shurjoint Model SS-41 stainless steel flange adapter allows for a direct connection with ANSI Class 125/150 flanges. The SS-41 is investment cast in Gr. CF8 (304) or CF8M (316). Integral closure tabs located on the flange OD help facilitate alignment and assembly.



Barpsi

Max. EndLoadkN

Lbs.

Dimensions Sealing Surface BoltsWeight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

Dmm

Inches

Emm

InchesNo. Size.

in

50 60.3 20 5.71 152 121 21 60 874

5 ⁄ 8 x 3 2.12 2.375 300 1330 6.00 4.75 0.83 2.36 3.42 4.6

65 73.0 20 8.37 178 140 22 73 1024

5 ⁄ 8 x 3 2.72 1

2 2.875 300 1950 7.00 5.50 0.87 2.87 4.00 6.0

80 88.9 20 12.41 190 152 24 89 1164

5 ⁄ 8 x 3 3.13 3.500 300 2880 7.50 6.00 0.94 3.50 4.56 6.8

100 114.3 20 20.51 229 191 24 114 1418

5 ⁄ 8 x 3 4.54 4.500 300 4770 9.00 7.50 0.94 4.50 5.56 9.9

150 168.3 20 44.47 279 241 25 168 1988

3 ⁄4 x 3 1⁄ 2 5.86 6.625 300 10340 11.00 9.50 1.00 6.62 7.79 12.9

200 219.1 20 75.37 343 298 28 219 2548

3 ⁄4 x 3 1⁄ 2 9.28 8.625 300 17520 13.50 11.75 1.12 8.62 10.00 20.2

* Based on Sch. 10S pipe.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. See page 141 for stainless steel coupling specifications.See pages 44-45 for flange washer Adaptor and page 267 flange drilling specificationsFor information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Nom. Rating Working Pressure (S40S, Roll-grooved)


Class 15020 Bar @38°C

300 psi @100°F



pipe. Apply 110% for cut-grooved Sch. 40S pipe. Apply 80% for roll-grooved Sch. 10S pipe and 50% for roll-grooved Sch. 5S pipe.

water.

A

BD E

C

MATERIAL SPECIFICATIONS Fitting Body:

A743 Gr. CF8

www.grinnell.com


Stainless

Steel


Figure 443 & 444 Flange Adapters (PN16/PN10 BS 4504)Tech Data Sheet: G568

Pipe Size Figure 443 - PN16 Figure 444 - PN10 BS 4504

Nominal mm

Inches

O.D.mm

Inches

Part Number

E to E mm

Inches

Mating Flange Bolt Approx. Weight

kgLbs.

Part Number

E to E mm

Inches

Mating Flange Bolt Approx. Weight

kgLbs.Qty. Size * Qty. Size *

32 42.4443H000424

904

M16 x 65 1.8–

––

– –1 1

4 1.660 3.54 4.0

40 48.3443H000484

924

M16 x 65 2.0–

––

– –1 1

2 1.900 3.62 4.4

50 60.3443H000604

954

M16 x 65 2.7–

––

– –2 2.375 3.74 6.0

65 76.1443H000764

954

M16 x 65 3.3–

––

– –76,1mm 3.000 3.74 7.3

80 88.9443H000894

1008

M16 x 70 4.0–

––

– –3 3.500 3.94 8.8

100 114.3443H001144

1028

M16 x 70 4.6–

––

– –4 4.500 4.02 10.1

125 139.7443H001394

1058

M16 x 75 6.0–

––

– –139.7mm 5.500 4.13 13.2

150 168.3443H001684

1058

M20 x 80 7.2–

––

– –6 6.625 4.13 15.9

200 219.1–

––

– –444H002194

112.08

M20 x 80 10.28 8.625 4.41 22.5

250 273.0–

––

– –444H002734

138.012

M20 x 90 18.010 10.750 39.7

300 323.9–

––

– –444H003244

138.012

M20 x 90 22.412 12.750 5.43 49.4

* = Bolts are not supplied. Bolt lengths shown are standard; it is the responsibility of the purchaser to verify correct lengths for intended applications

For information on alternative sizes, contact a GRINNELL Sales Representative.Schedule 40 fittings available upon request, contact a GRINNELL Sales Representative.See pages 44-45 for flange washer Adaptor and page 267 flange drilling specificationsSee page 141 for stainless steel specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

E to E



Stainless

Steel

151

C to E

C to E

Figure 410 90° Stainless Steel Elbows


Figure 401 45° Stainless Steel Elbows


Part Number

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

410H00034425 33.7 73.0 0.51 1.315 2.87 1.1

410H00042432 42.4 83.0 0.5

1 14 1.660 3.27 1.1

410H00048440 48.3 92.0 0.5

1 12 1.900 3.62 1.1

410H00060450 60.3 111.0 0.92 2.375 4.37 2.0

410H00076465 76.1 130.0 1.4

76,1mm 3.000 5.12 3.1

410H00089480 88.9 149.0 2.03 3.500 5.87 4.4

410H001144100 114.3 187.0 3.94 4.500 7.36 8.6

410H001394125 139.7 225.0 6.1

139.7mm 5.500 8.86 13.4

410H001684150 168.3 263.0 8.46 6.625 10.35 18.5

410H002194200 219.1 345.0 16.68 8.625 13.58 36.6

410H002734250 273.0 421.0 27.210 10.750 16.57 60.0

410H003244300 323.9 437.0 30.412 12.750 17.20 67.0


Schedule 40 fittings available upon request, contact a GRINNELL Sales Representative.

See page 141 for stainless steel fitting specifications.For instructions on part numbers, ordering information, and

availability, refer to page 15 or contact a GRINNELL Sales Representative.

Part Number

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

401H00034425 33.7 50.0 0.51 1.315 1.97 1.1

401H00042432 42.4 54.0 0.5

1 14 1.660 2.13 1.1

401H00048440 48.3 58.0 0.5

1 12 1.900 2.28 1.1

401H00060450 60.3 65.0 0.92 2.375 2.56 2.0

401H00076465 76.1 73.0 1.4

76,1mm 3.000 2.87 3.1

401H00089480 88.9 80.0 2.03 3.500 3.15 4.4

401H001144100 114.3 95.0 3.94 4.500 3.74 8.6

401H001394125 139.7 110.0 6.1

139.7mm 5.500 4.33 13.4

401H001684150 168.3 125.0 8.46 6.625 4.92 18.5

401H002194200 219.1 160.0 16.68 8.625 6.30 36.6

401H002734250 273.0 190.0 27.210 10.750 7.48 60.0

401H003244300 323.9 220.0 30.412 12.750 8.66 67.0





www.grinnell.com


Stainless

Steel


C to E

C to E

Figure 419 TeesTech Data Sheet: G570

Part Number

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

419H00034425 33.7 73.0 0.51 1.315 2.87 1.1

419H00042432 42.4 60.0 0.5

1 14 1.660 2.36 1.1

419H00048440 48.3 62.0 0.5

1 12 1.900 2.44 1.1

419H00060450 60.3 68.0 0.92 2.375 2.68 2.0

419H00076465 76.1 76.0 1.4

76,1mm 3.000 2.99 3.1

419H00089480 88.9 86.0 2.03 3.500 3.39 4.4

419H001144100 114.3 105.0 3.94 4.500 4.13 8.6

419H001394125 139.7 160.0 6.1

139.7mm 5.500 6.30 13.4

419H001684150 168.3 178.0 8.46 6.625 7.01 18.5

419H002194200 219.1 218.0 16.68 8.625 8.58 36.6

419H002734250 273.0 256.0 27.210 10.750 10.08 60.0

419H003244300 323.9 294.0 30.412 12.750 11.57 67.0

For information on alternative sizes, contact a GRINNELL Sales Representative.Schedule 40 fittings available upon request, contact a GRINNELL Sales

Representative.See page 141 for stainless steel fitting specifications.For instructions on part numbers, ordering information, and availability, refer to




Stainless

Steel

153

E to E

Figure 460 End CapsTech Data Sheet: G570

Part Number

Pipe Size NominalE to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

460H00034425 33.7 58.0 0.51 1.315 2.28 1.1

460H00042432 42.4 58.0 0.5

1 14 1.660 2.28 1.1

460H00048440 48.3 58.0 0.5

1 12 1.900 2.28 1.1

460H00060450 60.3 58.0 0.92 2.375 2.28 2.0

460H00076465 76.1 60.0 1.4

76,1mm 3.000 2.36 3.1

460H00089480 88.9 60.0 2.03 3.500 2.36 4.4

460H001144100 114.3 60.0 3.94 4.500 2.36 8.6

460H001394125 139.7 60.0 6.1

139.7mm 5.500 2.36 13.4

460H001684150 * 168.3 66.0 8.4

6 6.625 2.60 18.5

460H002194200 * 219.1 81.0 16.6

8 8.625 3.19 36.6

460H002734250 * 273.0 81.0 27.2

10 10.750 3.19 60.0

460H003244300 * 323.9 81.0 30.4

12 12.750 3.19 67.0

* Dished CapFor information on alternative sizes, contact a GRINNELL Sales Representative.Schedule 40 fittings available upon request, contact a GRINNELL Sales

Representative.See page 141 for stainless steel fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page


www.grinnell.com


Stainless

Steel


Figure 421 Reducing TeesTech Data Sheet: G570

Part Number

Pipe SizeC to Emm

Inches

C to Bmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

421H02010450 x 50 x 25 60.3 x 60.3 x 33.7 68.0 68.0 1.0

2 x 2 x 1 2.375 x 2.375 x 1.315 2.68 2.68 2.2

421H02012450 x 50 x 32 60.3 x 60.3 x 42.4 68.0 68.0 1.12 x 2 x 1 1

4 2.375 x 2.375 x 1.660 2.68 2.68 2.4

421H02015450 x 50 x 40 60.3 x 60.3 x 48.3 68.0 68.0 1.12 x 2 x 1 1

2 2.375 x 2.375 x 1.900 2.68 2.68 2.4

421H02615450 x 50 x 40 76.1 x 76.1 x 48.3 76.0 76.0 1.2

76.1 x 76.1mm x 1 12 3.000 x 3.000 x 1.900 2.99 2.99 2.6

421H02620450 x 50 x 50 76.1 x 76.1 x 60.3 76.0 76.0 2.0

76.1 x 76.1mm x 2 3.000 x 3.000 x 2.375 2.99 2.99 4.4

421H03020480 x 80 x 50 88.9 x 88.9 x 60.3 83.0 86.0 2.5

3 x 3 x 2 3.500 x 3.500 x 2.375 3.27 3.39 5.5

421H03026480 x 80 x 65 88.9 x 88.9 x 76.1 83.0 86.0 2.6

3 x 3 x 76.1mm 3.500 x 3.500 x 3.000 3.27 3.39 5.7

421H042204100 x 100 x 50 114.3 x 114.3 x 60.3 95.0 105.0 4.6

4 x 4 x 2 4.500 x 4.500 x 2.375 3.74 4.13 10.1

421H042264100 x 100 x 65 114.3 x 114.3 x 76.1 95.0 105.0 5.1

4 x 4 x 76.1mm 4.500 x 4.500 x 3.000 3.74 4.13 11.2

421H042304100 x 100 x 80 114.3 x 114.3 x 88.9 95.0 105.0 5.2

4 x 4 x 3 4.500 x 4.500 x 3.500 3.74 4.13 11.5

421H052304125 x 125 x 80 139.7 x 139.7 x 88.9 108.0 124.0 6.7

139.7 x 139.7mm x 3 5.000 x 5.000 x 3.500 4.25 4.88 14.8

421H052424125 x 125 x 100 139.7 x 139.7 x 114.3 108.0 124.0 6.7

139.7 x 139.7mm x 3 5.000 x 5.000 x 4.500 4.25 4.88 14.8

421H063204150 x 150 x 50 168.3 x 168.3 x 88.9 122.0 143.0 11.8

6 x 6 x 2 6.625 x 6.625 x 2.375 4.80 5.63 26.0

421H063264150 x 150 x 65 168.3 x 168.3 x 76.1 122.0 143.0 12.0

6 x 6 x 76.1mm 6.625 x 6.625 x 3.000 4.80 5.63 26.5

421H063304150 x 150 x 80 168.3 x 168.3 x 60.3 122.0 143.0 12.1

6 x 6 x 3 6.625 x 6.625 x 3.500 4.80 5.63 26.7

421H063424150 x 150 x 100 168.3 x 168.3 x 114.3 122.0 143.0 12.2

6 x 6 x 4 6.625 x 6.625 x 4.500 4.80 5.63 26.9

421H063524150 x 150 x 125 168.3 x 168.3 x 139.7 122.0 143.0 12.26 x 6 x 139.7 6.625 x 6.625 x 5.000 4.80 5.63 26.9

421H080424200 x 200 x 100 219.1 x 219.1 x 114.1 148.0 178.0 24.2

8 x 8 x 4 8.625 x 8.625 x 4.500 5.83 7.01 53.4

421H080524200 x 200 x 125 219.1 x 219.1 x 139.7 148.0 178.0 24.28 x 8 x 139.7 8.625 x 8.625 x 5.000 5.83 7.01 53.4

421H080634200 x 200 x 150 219.1 x 219.1 x 168.3 148.0 178.0 24.2

8 x 8 x 6 8.625 x 8.625 x 6.625 5.83 7.01 53.4

421H011634250 x 250 x 150 273.0 x 273.0 x 168.3 194.0 216.0 30.1

10 x 10 x 6 10.750 x 10.750 x 6.625 7.64 8.50 66.4

421H011804250 x 250 x 200 273.0 x 273.0 x 219.1 204.0 216.0 30.1

10 x 10 x 8 10.750 x 10.750 x 8.625 8.03 8.50 66.4

421H013804300 x 300 x 200 323.9 x 323.9 x 219.1 229.0 254.0 35.6

12 x 12 x 8 12.750 x 12.750 x 8.625 9.02 10.00 78.5

421H013114300 x 300 x 250 323.9 x 323.9 x 273.0 242.0 254.0 35.6

12 x 12 x 10 12.750 x 12.750 x 10.750 9.53 10.00 78.5

For information on alternative sizes, contact a GRINNELL Sales Representative.Schedule 40 fittings available upon request, contact a GRINNELL Sales Representative.See page 141 for stainless steel fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact

a GRINNELL Sales Representative.

C to B

C to E



Stainless

Steel

155

E to E

Figure 450 Concentric ReducersTech Data Sheet: G570

Part Number

Pipe SizeE to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

450H01210432 x 25 42.4 x 33.7 120.0 0.51 1

4 x 1 1.660 x 1.315 4.72 1.1

450H01510440 x 25 48.3 x 33.7 134.0 0.51 1

2 x 1 1.900 x 1.315 5.28 1.1

450H01512440 x 32 48.3 x 42.4 99.0 0.5

1 12 x 1 1

4 1.900 x 1.660 3.90 1.1

450H02015450 x 40 60.3 x 48.3 111.0 1.02 x 1 1

2 2.375 x 1.900 4.37 2.2

450H02615465 x 40 76.1 x 48.3 125.0 1.0

76.1mm x 1 12 3.000 x 1.900 4.92 2.2

450H02620465 x 50 76.1 x 60.3 125.0 1.1

76.1mm x 2 3.000 x 2.375 4.92 2.4

450H03015480 x 40 88.9 x 48.3 125.0 1.13 x 1 1

2 3.500 x 1.900 4.92 2.4

450H03020480 x 50 88.9 x 60.3 125.0 1.13 x 2 3.500 x 2.375 4.92 2.4

450H03026480 x 65 88.9 x 76.1 125.0 1.1

3 x 76.1mm 3.500 x 3.000 4.92 2.4

450H042204100 x 50 114.3 x 60.3 135.0 1.1

4 x 2 4.500 x 2.375 5.31 2.4

450H042264100 x 65 114.3 x 76.1 135.0 1.3

4 x 76.1mm 4.500 x 3.000 5.31 2.9

450H042304100 x 80 114.3 x 88.9 135.0 1.3

4 x 3 4.500 x 3.500 5.31 2.9

450H052304125 x 80 139.7 x 88.9 162.0 1.3

139.7mm x 3 5.500 x 3.500 6.38 2.9

450H052424125 x 100 139.7 x 114.3 162.0 1.6

139.7mm x 4 5.500 x 4.500 6.38 3.5

Part Number

Pipe SizeE to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

450H063424150 x 100 168.3 x 114.3 175.0 1.6

6 x 4 6.625 x 4.500 6.89 3.5

450H063524150 x 125 168.3 x 139.7 210.0 1.7

6 x 139.7mm 6.625 x 5.500 8.27 3.7

450H080424200 x 100 219.1 x 114.3 227.0 1.7

8 x 4 8.625 x 4.500 8.94 3.7

450H080524200 x 125 219.1 x 139.7 227.0 2.5

8 x 139.7mm 8.625 x 5.500 8.94 5.5

450H080634200 x 150 219.1 x 168.3 227.0 2.5

8 x 6 8.625 x 6.625 8.94 5.5

450H011634250 x 150 273.0 x 168.3 278.0 2.5

10 x 6 10.750 x 6.625 10.94 5.5

450H011804250 x 200 273.0 x 219.1 278.0 3.4

10 x 8 10.750 x 8.625 10.94 7.5

450H013804300 x 200 323.9 x 219.1 300.0 4.7

12 x 8 12.750 x 8.625 11.81 10.4

450H013114300 x 250 323.9 x 273.0 300.0 5.212 x 10 12.750 x 10.750 11.81 11.5





www.grinnell.com


Stainless

Steel


The Shurjoint Model SJ-400 Butterfly Valve is a grooved end stainless steel butterfly valve, supplied with a 10 position lever handle (SJ-400-L) or worm gear operator (SJ-400-W). The body is available in CF8M (type 316) to ASTM A 743 with integral neck and ISO 5211 mounting pad. It features a dual seal disc encapsulated with Gr. E EPDM for cold and hot water services. The end-to-end dimensions conform to MSS SP-67. The SJ-400 is UL classified in accordance with ANSI/NSF 61 and Annex G for potable water use to temperature 23°C (73.4°F).


Shurjoint Figure SJ-400 Butterfly Valve(Page 1 of 2)


Nom. Rating



Class 150

20 Bar @38°C300 psi @100°F




SJ-400-L50 - 300mm (2" - 12")

SJ-400-W350 - 600mm (14" - 24")

MATERIAL SPECIFICATIONSValve Body:

743, A 351, or A 744 which is UL classified in accordance with ANSI/NSF 61 and Annex G for potable water use to temperature 23°C (73.4°F).

Stems:

Disc:

EPDM.

Disc Encapsulation:: EPDM Rubber is classified

in accordance with ANSI/NSF 61 and Annex G for potable water use to temperature 23°C (73.4°F)

O-Rings:

Gear Box:

A 351.

Pipe Size Equivalent Length on Sch. 40 Pipe*

MeterFeet

Cv ValuesNominal mm

Inches

O.D.mm

Inches50 60.3 2.48

1202 2.375 8.165 73 2.48

2102.5 2.875 8.165 76.1 2.48

21076.1mm 3.000 8.1

80 88.9 2.56380

3 3.500 8.4100 114.3 2.53

7204 4.500 8.3

125 139.7 2.991150

139.7mm 5.500 9.8125 141.3 2.99

11505 5.563 9.8

150 165.1 2.262250

165.1mm 6.500 7.4150 168.3 2.26

22506 6.625 7.4

200 219.1 3.353800

8 8.625 11.0250 273.0 3.20

550010 10.750 10.5300 323.9 3.66

825012 12.750 12.0

350 355.6 7.629500

14 14.000 25.0400 406.4 7.92

1300016 16.000 26.0

450 457.2 9.7516000

18 18.000 32.0500 508.0 11.37

2000020 20.000 37.3600 609.6 13.32

2900024 24.000 43.7

* At 15 feet/sec. (4.6m/s) velocity of water.



Stainless

Steel

157

SJ-400-L50 - 300mm (2" - 12")

SJ-400-W350 - 600mm (14" - 24")

Shurjoint Figure SJ-400 Butterfly Valve(Page 2 of 2)



kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C D

E (Gear

Operator)

E (Lever)

Fmm

Inches50 60.3 81 64 63 106 153 192 154 2.32 2.375 3.19 2.5 2.48 4.17 6.02 7.56 6.06 5.1

65 73 97 79 68 110 153 192 154 3.22.5 2.875 3.81 3.13 2.69 4.33 6.02 7.56 6.06 7.1

65 76.1 97 79 68 110 153 192 154 3.276.1mm 3.000 3.81 3.13 2.69 4.33 6.02 7.56 6.06 7.1

80 88.9 97 92 76 126 153 192 154 3.53 3.500 3.81 3.63 3 4.96 6.02 7.56 6.06 7.7

100 114.3 116 118 89 135 153 260 154 5.04 4.500 4.56 4.63 3.5 5.31 6.02 10.24 6.06 11

125 139.7 148 145 102 168 153 260 154 7.1139.7mm 5.500 5.83 5.71 4.02 6.61 6.02 10.24 6.06 15.7

125 141.3 148 145 102 168 153 260 154 7.15 5.563 5.83 5.71 4.02 6.61 6.02 10.24 6.06 15.7

150 165.1 148 145 102 184 153 260 154 9.2165.1mm 6.500 5.81 5.69 4 7.24 6.02 10.24 6.06 20.3

150 168.3 148 145 102 184 153 260 154 9.26 6.625 5.81 5.69 4 7.24 6.02 10.24 6.06 20.3

200 219.1 133 222 140 208 200 260 203 12.28 8.625 5.25 8.75 5.5 8.19 7.87 10.24 7.99 26.9

250 273.0 159 276 170 235 200 356 203 28.310 10.750 6.25 10.87 6.69 9.25 7.87 14.02 7.99 62.4

300 323.9 165 327 205 260 200 356 203 40.012 12.750 6.5 12.87 8.07 10.25 7.87 14.02 7.99 88.2

350 355.6 178 365 224 276 242 – 305 59.014 14.000 7.01 14.37 8.82 10.87 9.53 12.01 130.1

400 406.4 178 416 248 302 242 – 305 67.016 16.000 7.01 16.38 9.76 11.89 9.53 12.01 147.7

450 457.2 203 470 283 350 242 – 305 86.018 18.000 7.99 18.5 11.14 13.78 9.53 12.01 189.6

500 508.0 216 527 314 383 290 – 412 133.020 20.000 8.5 20.75 12.36 15.08 11.42 16.22 293.2

600 609.6 254 629 368 453 290 – 412 160.024 24.000 10 24.76 14.49 17.83 11.42 16.22 352.7



A

E

O.D.

D

BB

C

D

E

F

O.D.

A

www.grinnell.com


Stainless

Steel


Shurjoint Figure SJ-600L Ball Valve(Lever)(Page 1 of 2)

Shurjoint Tech Data Sheet: K-12The Shurjoint Model SJ-600L is a stainless steel, grooved-end, two-piece, full port ball valve designed and tested in conformance with MSS SP-110 and SP-72. The lever handle is equipped with tamper resistant locking holes. The SJ-600L is comprised of a stainless steel body and end cap, virgin TFE seats and stainless steel trim. The valve is supplied standard in CF8M (316).


40 - 80mm (1 1⁄2" - 3")

100mm (4")


Value

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesL H W d

40 48.3 140 94 193 38270

3.01 1

2 1.900 5.50 3.70 7.60 1.50 6.6

50 60.3 156 105 193 50500

4.02 2.375 6.15 4.13 7.60 1.97 8.8

65 73.0 180 110 250 65800

7.02 1

2 2.875 7.09 4.33 9.84 2.56 15.4

65 76.1 180 110 250 65800

7.076.1mm 3.000 7.09 4.33 9.84 2.56 15.4

80 88.9 214 152 250 781200

9.43 3.500 8.42 6.00 9.84 3.07 20.7

100 114.3 240 167 290 1002150

25.04 4.500 9.45 6.57 11.42 3.94 55.0

* The weight includes the lever handle.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


Nom. Rating


Shell Test(Hydrostatic)


CWP 42 Bar @38°C600 psi @100°F

63 Bar900 psi



*Working pressure is for connection with cut- or roll-grooved schedule Sch. 40S pipe.


W

L

Hd

MATERIAL SPECIFICATIONSBody, End Cap, Stem, and Ball:

Seats:

Seals:

Lever Handle:

Flow Data (Cv Values in Dimensions table):Values for flow of water at 16°C (60°F).Where: Cv = Flow coefficient Q = Flow (GPM) ΔP = Pressure drop (psi)



Stainless

Steel

159

Shurjoint Figure SJ-600W Ball Valve(Gear)

(Page 2 of 2)

Shurjoint Tech Data Sheet: K-12The Shurjoint Model SJ-600W is supplied with a worm gear operator. The standard gear operator is supplied with a bracket and extension sleeve. The ISO 5211 mounting pad allows for mounting of other power actuators. Sizes available are 50 to 100mm (2" to 4").


Value

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesK H W

50 60.3 152 137 203500

8.102 2.375 6 5.38 8 17.82

65 73.0 152 145 203800

11.102 1

2 2.875 6 5.68 8 24.42

65 76.1 152 145 203800

11.1076,1mm 3.000 6 5.68 8 24.42

80 88.9 152 182 2031200

13.503 3.500 6 7.16 8 29.70

100 114.3 152 203 2032150

29.04 4.500 6 8.00 8 63.80

* The weight includes the worm gear operator.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


H

K

W

General Notes:Maximum Working Pressure (CWP) listed is the maximum cold water pressure for general piping services tested to ASTM F1476 and or

AWWA C606 methods. Figures listed are based on roll- or cut-grooved standard wall stainless steel pipe. For other pipe schedules or pipe materials, contact Shurjoint for additional information.

Field Joint Test: For one time only the system may be tested hydrostatically at 1½ times the maximum working pressure listed (AWWA C606 5.2.3).

Warning: Piping systems must always be depressurized and drained before attempting disassembly and or removal of any components.Shurjoint reserves the right to change specifications, designs and or standard without notice and without incurring any obligations.

www.grinnell.com


Stainless

Steel


Shurjoint Figure SJ-630 Three Port Ball ValveShurjoint Tech Data Sheet: K-25

The Shurjoint Model SJ-630 is a grooved-end three-port ball valve designed to divert media from bottom inlet to either of the two outlets ports. The valve port is a regular port size and the stem is a blowout proof design to MSS SP-72 and API Standard 608. The valve is supplied with a carbon steel lever handle equipped with a tamper resistant locking device.

The valve body and three-port ball are made of austenitic stainless steel conforming to ASTM A351 CF8M(316) and blowout proof stem is stainless steel to ASTM A479 Type 316. The Valve body and trim materials are in compliance with NACE MR-01-75 requirement.


Pipe Size Dimensions - mm InchesCv / Kv Value

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesL H W d A B

50 60.3 167 110 228 38 83 7936 / 31

3.582 2.375 6.55 4.32 8.96 1.50 3.25 3.13 7.89



Nom. Rating



CWP 41 Bar @38°C600 psi @100°F



* Working pressure is based on connection with roll- or cut-grooved Sch. 40S stainless steel pipe.

* Seat test: 110% the working pressure.* Shell test: 1.5 times the working pressure.

W

H

A

L

O.D. d

B

MATERIAL SPECIFICATIONSBody, End Cap & Ball:

Stem:

Seats:

Body Seal:

Stem Hardware:

Lever Handle:



Stainless

Steel

161

Shurjoint Figure SJ-726 Y StrainerShurjoint Tech Data Sheet: K-11


The Shurjoint Model SS-726 Stainless Steel Grooved-end Y-Strainers are designed to strain debris and foreign matter from piping systems and thus provide inexpensive protection for costly pumps, meters and other components. Cleaning and maintenance of the screen can be accomplished easily by removing the coupling. The Model SS-726 Stainless Steel Y-Strainer is suitable for vertical or horizontal installations.

Nom. Rating

Working Pressure(S40S, Roll-grooved)


Class 150

20 Bar @ 38°C300 psi @100°F




water.

Pipe Size Max. Working Pressure

Barpsi

Dimensions - mm Inches Drain PlugSizemm

Inches

Cv Valve

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C

65 73.0 20 273 199 122 1592

7.62 1

2 2.875 300 10.75 7.83 4.80 12 16.7

80 88.9 20 299 221 129 15162

8.63 3.500 300 11.75 8.70 5.08 1

2 18.9

100 114.3 20 362 269 168 25284

9.64 4.500 300 14.25 10.59 6.61 1 21.1

150 168.3 20 470 357 219 25770

39.06 6.625 300 18.50 14.05 8.62 1 85.8



B

C A

MATERIAL SPECIFICATIONSBody, End-Cap, Drain Plug and Coupling Segments:

A 743 Gr. CF8

Bolts & Nuts:

B-8 with heavy duty nuts to ASTM A 194 B8, Molybdenum disulfide (MoS2) coated.

B-8M with heavy duty nuts to ASTM B8M, Molybdenum disulfide (MoS2) coated.

Screen:

Factory’s standard screen perforation is 3.2mm ( 1⁄8"). Other perforations are available upon request.

Flow Data (Cv Values in Dimensions table):Values for flow of water at 16°C (60°F).Where: Cv = Flow coefficient Q = Flow (GPM) ΔP = Pressure drop (psi)

www.grinnell.com


Stainless

Steel


Shurjoint Figure SS-723 Mechanical TeeShurjoint Tech Data Sheet: K-10

Pressure-Temperature RatingNom.

RatingWorking Pressure

(S40S, Roll-grooved)Max. ServiceTemperature

Class 150

20 Bar @ 38°C300 psi @100°F



The Shurjoint Model SS-723 stainless steel mechanical tee is the ideal fitting for branch or direct outlet connections to sprinkler heads, drop nipples and or gauges on stainless steel pipe. No need for welding, simply cut or drill a hole at the desired location, position the housing so that the locating collar fits within the hole and secure with the bolts and nuts. The SS-723 is comprised of stainless steel investment cast housings, EPDM gasket and stainless steel track bolts and nuts. The SS-723 is available in grades CF8 (304) and CF8M (316). Additional sizes and or grades are available on request, please contact for Shurjoint for details.

Pipe Size HoleDiameter

mmInches

Dimensions - mm Inches Sealing Surface - mm InchesBolt Size.

in

Approx.Weight

kgLbs.

Nominal mm

InchesA B C D T*

32 x 15 30 41 26 87 49 27 5 ⁄ 16 x 1 1⁄ 20.3

1¼ x ½ 1.18 1.60 1.02 3.44 1.93 1.06 0.7

32 x 20 30 44 26 87 49 29 5 ⁄ 16 x 1 1⁄ 20.3

1¼ x ¾ 1.18 1.70 1.02 3.44 1.93 1.14 0.7

32 x 25 30 51 26 87 49 34 5 ⁄ 16 x 1 1⁄ 20.4

1¼ x 1 1.18 2.00 1.02 3.44 1.93 1.34 0.9

40 x 15 30 44 29 90 49 30 5 ⁄ 16 x 1 1⁄ 20.3

1½ x ½ 1.18 1.70 1.13 3.54 1.93 1.18 0.7

40 x 20 30 46 29 90 49 31 5 ⁄ 16 x 1 1⁄ 20.3

1½ x ¾ 1.18 1.81 1.13 3.54 1.93 1.22 0.7

40 x 25 30 53 29 90 49 36 5 ⁄ 16 x 1 1⁄ 20.4

1½ x 1 1.18 2.09 1.13 3.54 1.93 1.42 0.9

50 x 15 30 51 36 109 51 37 5 ⁄ 16 x 1 1⁄ 20.5

2 x ½ 1.18 2.00 1.42 4.28 2.00 1.46 1.1

50 x 20 30 53 36 109 51 28 5 ⁄ 16 x 1 1⁄ 20.5

2 x ¾ 1.18 2.09 1.42 4.28 2.00 1.10 1.1

T*: Take-out (Centre of run to end of pipe to be engaged)Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


B

C

A

D

Takeout



MATERIAL SPECIFICATIONSHousing:

Bolts & Nuts:

nuts to ASTM A 194 B8, Molybdenum disulfide (MoS2) coated.

duty nuts to ASTM B8M, Molybdenum disulfide (MoS2) coated.

HDPE SYSTEMS

163

www.grinnell.com

HDPE SYSTEMS

HDPE

Systems


Figure 9095HDPE CouplingsPages 165 - 166

Figure 9097HDPE Transition Couplings

Page 167

Figure 9094HDPE Flange Couplings

Page 168

HDPE couplings are designed to join IPS HDPE pipe, DR32.5 to 7.3, conforming to ASTM D2513, D3350 and or ANSI/AWWA C901 and ISO HDPE pipe, SDR 9 to 26, conforming to ISO 4427- 1⁄2.

Coupling Ductile Iron Housing Specifications


Bolt/Nut SpecificationsANSI: Carbon steel oval neck bolts & nuts are heat-treated and conform to the physical properties of ASTM A 183 Grade 2 and SAE J429 Grade 5 with a minimum tensile strength of 7584 Bar (110,000 psi). Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 183 Grade 2 and SAE J995 Grade 5. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

Metric: Carbon steel oval neck track head bolts (Gold colour coded) are heat treated and conform to the physical properties of ASTM F 568 M with a minimum tensile strength of 760 MPa. Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 563 M Class 9. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

request.


code stripe identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services.

(Colour code: Orange stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to +82°C (-20°F to +180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F).

GRINNELL recommends the use of a silicone based lubricant for the HDPE series.

Coatings

HDPE Systems Table of Contents


Pressure Ratings (psi) - IPS Size

Pressure Ratings (Bar) - ISO Size

Pipe Dimension Ratio (DR)

PE4710PE100

PE3608PE3408

DR 7.3 317 265

DR 9 250 200

DR 11 200 160

DR 13.5 160 130

DR 17 125 100

DR 21 100 80

DR 26 80 65

DR 32.5 63 50

Design stress: PE4710 1000 psi, PE3608 & 3408 800 psiDR (Pipe Dimension Ratio)Where: DR = D/tD = pipe outside diameter, in.t = pipe minimum wall thickness, in.

Pipe Dimension Ratio (SDR) PE100 PE80

SDR 9 20 16SDR 11 16 10SDR 17 10 6.3SDR 26 6.3 4

Design stress: PE100 8.0 MPa, PE80 5.0 MPaSDR (Standard Dimension Ratio)Where: DR = D/tD = pipe outside diameter, mmt = pipe minimum wall thickness, mm

As the ductile iron coupling is much stronger than HDPE pipe itself, pressure ratings of HDPE couplings are determined by the pressure rating of HDPE pipe used. Pressure ratings of HDPE pipe vary depending on DR or SDR (standard dimension ratio) and design stress of the material.



HDPE SYSTEMS

HDPE

Systems

165

The Shurjoint Figure 9095 HDPE Coupling is specially designed for joining sections of high-density polyethylene (HDPE) piping. The Figure 9095 features a four-bolt coupling design with machined gripping teeth to positively secure high-density polyethylene piping and create a leak-tight joint.

The contoured housing features an integrated ramp design that helps avoid obstacles while relocating pipe runs. This coupling is ideal for mining, irrigation, and tunnelling applications.

B

A

C

Shurjoint Figure 9095 HDPE CouplingsIPS Pipe Size

(Page 1 of 2)

IPS Sizes Shurjoint Tech Data Sheet: Q-01

Part Number

IPS Pipe Size Dimensions - mm InchesCoupling Bolt Size

(Qty. 4) Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C

909520ES50 60.3 86.0 133.0 117.0 – 2.62 2.375 3.39 5.24 4.61 1

2 x 2 38 5.7

909530ES80 88.9 117.0 165.0 102.0 – 3.63 3.500 4.61 6.50 4.02 1

2 x 2 34 7.9

909540ES100 114.3 146.0 203.0 146.0 – 5.24 4.500 5.75 7.99 5.75 1

2 x 3 11.4

909560ES150 168.3 200.0 273.0 149.0 – 8.26 6.625 7.87 10.75 5.87 5

8 x 3 12 18.0

909580ES200 219.1 264.0 333.0 152.0 – 12.58 8.625 10.39 13.11 5.98 5

8 x 3 12 27.5

909510ES250 273.0 318.0 397.0 165.0 – 20.010 10.750 12.52 15.63 6.50 3

4 x 4 34 44.0

909512ES300 323.9 365.0 448.0 200.0 – 25.512 12.750 14.37 17.64 7.87 3

4 x 4 34 56.1

909514ES350 355.6 413.0 492.0 257.0 – 41.214 14.000 16.26 19.37 10.12 1 x 6 90.6

909516ES400 406.4 467.0 543.0 257.0 – 44.216 16.000 18.39 21.38 10.12 1 x 6 97.2

909518ES450 457.2 515.0 595.0 260.0 – 50.518 18.000 20.28 23.43 10.24 1 x 6 111.1

909521ES500 508.0 568.0 651.0 260.0 – 61.820 20.000 22.36 25.63 10.24 1 x 6 136.0

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 164 for HDPE coupling specifications and pages 234 - 245 for gasket information.See pages 164, 256 for pipe wall thickness and standard dimension ratio information.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

IPS Size

www.grinnell.com

HDPE SYSTEMS

HDPE

Systems


B

A

C

Shurjoint Figure 9095 HDPE Couplings ISO Pipe Size (Page 2 of 2)

ISO Sizes Shurjoint Tech Data Sheet: Q-04

ISO Pipe OD Size Dimensions - mm Coupling Bolt Size

(Qty. 4) mm

Approx.Weight

kgMin. mm

Max. mm A B C

50 50.5 72 115 105 M10 x 55 1.5

63 63.6 85 128 105 M10 x 55 1.9

75 75.7 97 140 105 M10 x 55 2.4

90 90.9 113 169 105 M12 x 75 3.3

110 111.0 139 181 112 M12 x 75 4.0

160 161.5 190 232 118 M12 x 75 5.6

180 181.7 211 253 118 M12 x 75 7.5

200 201.8 236 305 127 M16 x 90 9.4

225 226.4 261 330 127 M16 x 90 11.3

250 252.3 289 351 134 M16 x 110 12.7

280 281.7 319 406 134 M16 x 90 18.4

315 317.9 354 438 134 M20 x 120 16.7

355 357.2 412 489 256 M24 x 110 36.7

400 402.4 462 540 256 M24 x 110 45.5

450 452.7 515 595 256 M24 x 110 57.7



ISO Size


HDPE SYSTEMS

HDPE

Systems

167

The Shurjoint Figure 9097 HDPE Transition Coupling provides for an efficient transition from grooved piping systems to high-density polyethylene (HDPE) piping. The Figure 9097 features a four-bolt coupling design with one side of machine gripping teeth and a grooved end creating a leak-tight joint between high-density polyethylene and grooved piping systems.

The contoured housing features the same integrated ramp design as the Shurjoint Figure 9095, which helps avoid obstacles while relocating pipe runs. This coupling is ideal for mining, irrigation, and tunnelling applications.

B

A

C

Shurjoint Figure 9097 HDPE Transition CouplingsIPS & ISO Pipe Sizes

IPS Sizes Shurjoint Tech Data Sheet: Q-02ISO Sizes Shurjoint Tech Data Sheet: Q-05

Part Number

IPS Pipe Size Dimensions - mm InchesCoupling Bolt Size

(Qty. 4) Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C

909720ES50 60.3 86.0 152.0 79.0 – 2.02 2.375 3.39 5.99 3.11 1

2 x 2 38 4.4

909730ES80 88.9 114.0 181.0 79.0 – 2.73 3.500 4.49 7.13 3.11 1

2 x 3 5.9

909740ES100 114.3 146.0 216.0 95.0 – 3.84 4.500 5.75 8.50 3.74 1

2 x 3 8.4

909760ES150 168.3 203.0 286.0 95.0 – 5.76 6.625 8.00 11.26 3.74 5

8 x 3 12 12.5

909780ES200 219.1 267.0 346.0 108.0 – 9.78 8.625 10.51 13.63 4.25 5

8 x 3 12 21.3

909710ES250 273.0 321.0 432.0 127.0 – 16.010 10.750 12.64 17.00 5.00 3

4 x 4 34 35.2

909712ES300 323.9 375.0 495.0 127.0 – 19.612 12.750 14.76 19.49 5.00 3

4 x 4 34 43.1



ISO Pipe OD Size Dimensions - mm Coupling Bolt Size

(Qty. 4) mm

Approx.Weight

kgMin. mm

Max. mm A B C

63.0 60.3 86 146 73 M10 x 55 1.575.0 73.0 97 146 73 M10 x 55 1.990.0 88.9 114 178 73 M12 x 75 2.3110.0 114.3 144 203 76 M12 x 75 2.8160.0 165.1 194 254 76 M12 x 75 3.9160.0 168.3 198 257 76 M12 x 75 3.9200.0 219.1 256 321 84 M16 x 90 6.4250.0 273.0 321 432 127 M20 x 120 11.9315.0 323.9 375 495 127 M20 x 120 12.7



IPS Size

ISO Size

www.grinnell.com

HDPE SYSTEMS

HDPE

Systems


Shurjoint Figure 9094 Flange CouplingsIPS (ANSI) & ISO (PN10/16) Pipe SizesIPS Sizes Shurjoint Tech Data Sheet: Q-03ISO Sizes Shurjoint Tech Data Sheet: Q-06 The Shurjoint Figure 9094 HDPE Flange Coupling provides

for an efficient transition from high-density polyethylene (HDPE) piping to ANSI class 125#/150# or PN 10/16 flanged piping system. This coupling is ideal for mining, irrigation, and tunnelling applications.

CB

A

Part Number

IPS Pipe Size Dimensions - mm Inches Draw Bolt/ Nut Flange Mating Bolts ‡ Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C Qty Size

Inches Qty Size Inches

–80 88.9 197.0 225.0 79.0

2–

44.8

3 3.500 7.75 8.86 3.10 58 x 2 1

8 5

8 x 3 14 10.6

909440ES100 114.3 229.0 260.0 79.0

2–

86.8

4 4.500 9.00 10.25 3.10 58 x 2 1

8 5

8 x 3 14 15.0

909460ES150 168.3 279.0 311.0 95.0

2–

8– 9.8

6 6.625 11.00 12.25 3.75 58 x 2 1

8 3

4 x 3 12 21.5

909480ES200 219.1 343.0 375.0 87.0

2–

8– 13.1

8 8.625 13.50 14.75 3.42 58 x 2 1

8 3

4 x 3 34 28.8

–250 273.0 406.0 533.0 108.0

4 1219.5

10 10.750 16.00 21.0 4.25 34 x 2 3

8 1 x 6 42.9

–300 323.9 483.0 610.0 108.0

4 1223.4

12 12.750 19.02 24.0 4.25 34 x 2 3

8 1 x 6 51.5

‡ Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger. It is the responsibility of the purchaser to verify correct length for the intended application.



ISO/ PN10/16 Pipe OD Size Dimensions - mm Draw Bolt/ Nut Flange Mating Bolts ‡ Approx.Weight

kgHDPEmm

Steelmm A B C Qty Size

mm Qty Size mm

63 60.3 165 196.9 78.6 2 M16 x 54 4 M16 4.3 90 88.9 200 228 79 2 M16 x 54 8 M16 4.8110 114.3 220 251 79 2 M16 x 54 8 M16 6.8160 165.1 285 317 95 2 M20 x 60 8 M20 9.8200 219.1 340 372 87 2 M20 x 60 12 (PN 16) M20 13.1250 273.0 405 532 108 4 M24 x 100 12 M24 19.5315 323.9 460 587 108 4 M24 x 100 12 M24 28.5

‡ Mating bolts and nuts are not supplied. Flange mating bolts must be at least SAE J429, Grade 5 or stronger. It is the responsibility of the purchaser to verify correct length for the intended application.



IPS Size / ANSI Class 125/150

ISO Size / PN 10/16

EXTRA HEAVY END PROTECTION

(EP) SYSTEMS

169

www.grinnell.com

EXTRA HEAVY (EP) SYSTEMS

Extra

Heavy

Systems


Figure XH-70EPExtra Heavy Rigid Coupling End Protection (EP) Gasket

Page 171

Figure 10EP90° EP Elbow

Page 172

Figure 11EP45° EP Elbow

Page 172

Extra Heavy Systems Table of Contents

FITTING MATERIAL SPECIFICATIONS

Fitting Body:

strength 448MPa (65,000 psi). or segmentally welded Schedule 80 steel pipe, per ASTM A-53 Schedule 80.

Surface Finish:

General Notes:

the service temperature range of the gasket used in the coupling. For additional information contact Shurjoint.

and loads based on Sch. 40 steel pipe with roll grooves to ANSI/AWWA C 606 (latest version) specifications. For information on other pipe schedules contact Shurjoint.

the figures shown.

disassembly and or removal of any components.

without notice and without incurring any obligations.

Figure 20EPEP Tee

Page 173

Figure 35EPEP CrossPage 173

Figure 22EPEP Header Tee

Page 174




Extra

Heavy

Systems

171

Shurjoint Figure XH-70EP Extra Heavy Rigid Couplings With End Protection (EP) Gasket

Shurjoint Tech Data Sheet: C-09

EP Gasket

The Shurjoint Model XH-70EP is designed for use with plastic coated or cement lined pipe. The EP (end protection) gasket serves to form a continuous lined surface at the joint and also helps protect the pipe ends from corrosion. This coupling is rated up to 175 Bar (2500 psi) when used in conjunction with machined EP cut grooves and the applicable pipe.


Barpsi

Max. EndLoadkN

Lbs.

Dimensions Bolt / Nut BoltWeight

Kg.Lbs.

Nominalmm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesNo. Size

in

50 60.3 175 50 90 150 492 5 ⁄ 8 x 2 3 ⁄4

1.52 2.375 2500 11070 3.54 5.90 1.92 3.3

65 73.0 175 73.2 103 168 492 5 ⁄ 8 x 2 3 ⁄4

1.82 1

2 2.875 2500 16220 4.06 6.61 1.92 4.0

80 88.9 175 108.6 122 188 512 5 ⁄ 8 x 2 3 ⁄4

2.23 3.500 2500 24040 4.80 7.40 2.00 4.8

100 114.3 175 179.5 157 222 552 3 ⁄4 x 4 3 ⁄4

4.04 4.500 2500 39740 6.18 8.74 2.17 8.8

150 168.3 140 311.3 218 295 572 7⁄ 8 x 5 1⁄ 2

8.06 6.625 2000 68910 8.58 11.61 2.25 17.6

200 219.1 140 527.6 275 364 702 1 x 5 1⁄ 2

10.98 8.625 2000 116790 10.83 14.33 2.75 24.0

250 273.0 88 514.8 334 424 752 1 x 5 1⁄ 2

14.210 10.750 1250 113400 13.15 16.70 2.95 31.2

300 323.9 88 724.7 390 480 752 1 x 5 1⁄ 2

16.712 12.750 1250 159510 15.35 18.93 2.95 36.7

* Pressures quoted are based on EP cut grooved XS (Sch. 80) pipe.CAUTION: Always fasten the bolts to the required torque. Contact GRINNELL for part numbersRefer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint



Housing:

ASTM A395 Gr.65-45-15, min. tensile strength 4481 Bar (65,000 psi).

Surface Finish:

Rubber Gasket: “EP” gasket (Colour code: Orange

stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to 82°C (-20°F to 180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F)

Bolts & Nuts:

ASTM A449-83a (or A183 Gr. 2), minimum tensile strength 7584 Bar (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to ASTM A563

BC

A

www.grinnell.com


Extra

Heavy

Systems


Extra Heavy Cut Grooved Fittings (End Protection)

Shurjoint Figure 10EP 90° EP ElbowsShurjoint Tech Data Sheet: E-23

Shurjoint Figure 11EP 45° EP ElbowsShurjoint Tech Data Sheet: E-23

Pipe SizeC to Emm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 83 1.02 2.375 3.25 2.2

65 73.0 95 1.72 1

2 2.875 3.75 3.8

80 88.9 108 2.73 3.500 4.25 5.9

100 114.3 127 4.44 4.500 5.00 9.7

150 168.3 165 10.46 6.625 6.50 22.9


See page 170 for fitting specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to


Pipe SizeC to Emm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 51 0.82 2.375 2.00 1.8

65 73.0 57 1.32 1

2 2.875 2.25 2.9

80 88.9 64 1.93 3.500 2.50 4.3

100 114.3 76 3.94 4.500 3.00 8.5

150 168.3 89 7.56 6.625 3.50 16.5


See page 170 for fitting specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to


Shurjoint offers a variety of fittings with extra heavy (Sch. 80) wall thickness and "EP" cut grooves available for use with XH-70EP couplings. These fittings must be used with XH-70EP couplings in high pressure systems where the system pressure exceeds the published ratings for XH-1000 or Model 7707 couplings.

C-E

C-E

C-E

C-E



Extra

Heavy

Systems

173

Shurjoint Figure 20EP EP Tee

Shurjoint Tech Data Sheet: E-23

Shurjoint Figure 35EP EP Cross

Shurjoint Tech Data Sheet: E-23

Pipe SizeC to Emm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 83 1.62 2.375 3.25 3.5

65 73.0 95 3.62 1

2 2.875 3.75 7.9

80 88.9 108 7.33 3.500 4.25 16.0

100 114.3 127 10.74 4.500 5.00 23.5

150 168.3 165 12.26 6.625 6.50 27.0


See page 170 for fitting specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or


Pipe SizeC to Emm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 83 1.82 2.375 3.25 3.9

65 73.0 95 3.02 1

2 2.875 3.75 6.6

80 88.9 108 6.43 3.500 4.25 14.2

100 114.3 127 7.24 4.500 5.00 15.8

150 168.3 165 20.96 6.625 6.50 46.0


See page 170 for fitting specifications.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or


C-E

C-E

C-E

C-E

www.grinnell.com


Extra

Heavy

Systems


Shurjoint Figure 22EP EP Header TeeShurjoint Tech Data Sheet: E-23

Fitting Size Mated C to EC to Emm

Inches

Approx.Weight

Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches50 to 80 60.3 108 1.52 to 3 2.375 4.25 3.4

50 to 100 73.0 127 1.92 to 4 2.875 5.00 4.1


See page 170 for fitting specifications.For information on alternative sizes, contact a GRINNELL Sales

Representative.For instructions on part numbers, ordering information, and availability, refer

to page 15 or contact a GRINNELL Sales Representative.

C-E

C-E

Shurjoint Model 22EP Header Tees are specifically designed for use in oilfield production headers where the top (test) line is 50mm (2") and the bottom production line is 80mm (3") or 100mm (4").


Nom. Rating

Working Pressure (STD, Roll-grooved)


Class300

52 Bar @ 38°C750 psi @100°F






SHOULDERED SYSTEMS

175

www.grinnell.com

SHOULDERED SYSTEMS

Shouldered

Systems


Shouldered SystemsTable of Contents & Specifications

Shouldered Piping System

The shouldered piping system is a classic and versatile piping method used for a wide range of applications including irrigation, dewatering on construction sites, and other installations, etc. The shouldered system features full flow characteristics, provides speed and ease of installation, and proven reliability. The system provides for limited expansion and contraction and accommodates some linear and angular movement. Each joint is a union.

The shouldered piping system utilizes Type A weld-on rings, manufactured from mild steel or material compatible to pipe end used.

L-3

Type A Weld-on Ring

Housing Segment

Gasket

Bolt & Nut

Shoulder Dimensions

( Type A Weld-on Rings )

The shouldered piping system utilizes Type A weld-on rings, manufactured from mild steel or material compatible to pipe end used. Type A rings are suitable for services up to maximum 41 Bar (600 psi) for sizes up 50 to 100mm (2" to 4") and 28 Bar (400 psi) for 125 to 200mm (5" 8")

NominalSizemm

Inches

Pipe ODD1mm

Inches

Shoulder Diameter

D2mm

Inches

Shoulder Length

Lmm

Inches

Nominal GapE

mmInches

50 60.3 66.5 16.0 3.22 2.375 2.62 0.63 0.13

80 88.9 97.0 16.0 3.23 3.500 3.82 0.63 0.13

100 114.3 122.0 17.5 3.24 4.500 4.80 0.69 0.13

150 165.1 174.5 17.5 3.26 6.500 6.87 0.69 0.13

150 168.3 178.0 17.5 3.26 6.625 7.00 0.69 0.13

200 219.1 232.0 20.6 3.28 8.625 9.13 0.81 0.13


Figure S35Shouldered Flexible Coupling

Page 177

Figure SD-28Shouldered Toggle Coupling

Page 178

L E

ØD1ØD2L

3



SHOULDERED SYSTEMS

Shouldered

Systems

177

Shurjoint Figure S35 Shouldered Flexible CouplingShurjoint Tech Data Sheet: T-05

CB

A


The Shurjoint Model S35 coupling is a flexible type shouldered coupling for general applications for use on Type A shouldered pipe ends.

Pipe Size Working Pressure(CWP)*

Barpsi

Dimensions - mm Inches Allowable Pipe End

Separationmm

Inches

Deflection ( ° )

BoltSizein

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

InchesA B C

50 60.3 20.7 99.0 139.0 46.0 3.22° 43'

3 ⁄ 8" x 2 1⁄ 8" 1.12 2.375 300 3.90 5.47 1.81 0.13 2.4

80 88.9 20.7 129.0 168.0 46.0 3.21° 53'

1⁄ 2" x 3" 1.53 3.500 300 5.08 6.61 1.81 0.13 3.3

100 114.3 20.7 159.0 200.0 50.0 3.21° 29'

1⁄ 2" x 3" 2.24 4.500 300 6.26 7.87 1.97 0.13 4.9

150 165.1 20.7 213.0 267.0 50.0 3.21° 2'

5 ⁄ 8" x 3 1⁄ 2" 3.56 6.500 300 8.39 10.50 1.97 0.13 7.7

150 168.3 20.7 219.0 279.0 50.0 3.21° 1'

5 ⁄ 8" x 3 1⁄ 2" 3.86 6.625 300 8.62 11.00 1.97 0.13 8.4

200 219.1 20.7 273.0 335.0 60.0 3.20° 47'

3 ⁄4" x 4 3 ⁄4" 5.98 8.625 300 10.75 13.19 2.36 0.13 13.0

250 273.0 20.7 335.4 396.8 65.0 3.20° 47'

3 ⁄4" x 4 3 ⁄4" 9.010 10.750 300 13.20 15.62 2.56 0.13 19.8

300 323.9 20.7 385.8 450.1 65.0 3.20° 47'

3 ⁄4" x 4 3 ⁄4" 10.412 12.750 300 15.19 17.72 2.56 0.13 22.9

* Working pressure is based on standard wall carbon steel pipe.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


Nom. Rating

Working Pressure(STD)


Class 150

20.7 Bar @38°C300 psi @100°F



*Working pressure is based on standard wall carbon steel pipe.*Proof test pressure: 1.5 times the working pressure, non-shock

cold water.*Burst pressure is engineered minimum 3 times the working

pressure.

MATERIAL SPECIFICATIONS Housing:


Surface Finish:

(Option)

Rubber Gasket: (Colour code: Orange stripe)

Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to 82°C (-20°F to 180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F)

Bolts & Nuts:

ASTM A 449-83a (or A 183 Gr. 2), minimum tensile strength 7584 Bar (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to ASTM A 563.

www.grinnell.com

SHOULDERED SYSTEMS

Shouldered

Systems


Shurjoint Figure SD-28 Shouldered Toggle CouplingShurjoint Tech Data Sheet: T-07

The Shurjoint Model SD-28 coupling is designed to connect shouldered-end pipe with Type A rings for services where frequent assembly and disassembly is desired or required. The housing segments are hinged with a lever handle for easy installation. The use of a split pin prevents accidental opening of the couplings.


Pipe Size Max. Working Pressure (CWP)*

Barpsi

Dimensions Allowable PipeEnd Separation

(E)mm

Inches

Deflection( ° )

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

Inches

50 60.3 20 86.5 112.5 49 3.22° - 43'

1.32 2.375 300 39.32 4.43 1.93 0.125 2.8

80 88.9 20 126 164 49 3.21° - 53'

2.03 3.500 300 4.96 6.46 1.93 0.125 4.4

100 114.3 20 160 214 52 3.21° - 29'

3.04 4.500 300 6.30 8.43 2.05 0.125 6.6

150 165.1 20 214 283 52 3.21° - 2'

4.36 6.500 300 8.43 11.14 2.05 0.125 6.5

150 168.3 20 217 282 52 3.21° - 1'

4.56 6.625 300 8.54 11.10 2.05 0. 125 9.9

200 219.1 20 278 360 60 3.20° - 47'

8.38 8.625 300 10.95 14.17 2.36 0.125 18.3

* Working pressure is based on standard wall carbon steel pipe.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


Nom. Rating



Class 150

20 Bar @38°C300 psi @100°F



*Working pressure is based on standard wall carbon steel pipe.*Proof test pressure: 1.5 times the working pressure, non-

shock cold water.*Burst pressure is engineered minimum 3 times the working

pressure.

BC

ASplit Pin

MATERIAL SPECIFICATIONS Housing & Locking Lever Handle:


Surface Finish:

colours

Rubber Gasket: (Colour code: Orange stripe)

Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to 82°C (-20°F to 180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F).


Toggle Links:

Hinge Pin:

Rivet:

Split Pin:

G-MINE (PVC) SYSTEMS

179

www.grinnell.com


G-MINE

Systems


Figure 72900SDR Pipe (Spline x Spline)

Page 182

Figure 72904Couplings (Spline x Spline)

Page 183

Figure 72905Weld Couplings

(Spline x Solvent Weld)Page 183

Figure 72919Reducing Couplings

(Male Spline x Female Spline)Page 184

Figure 72940Outlet Couplings

(Male Spline x Female Spline x Female Thread)

Page 184

Figure 72930Outlet Couplings (Spline x Spline x Female Thread)

Page 185

Figure 72906End Nipples

(Spline x Plain End)Page 185

Figure 72907Nipples

(Spline x Groove)Page 186

Figure 72908Nipples

(Spline x Male Thread)Page 186

Figure 72909Nipples

(Plain End x Male Thread)Page 187

Figure 72911Nipples

(Spline x Spline)Page 187





Figure 7291390° Sweep Elbows (Spline x Spline)

Page 189

Figure 7291445° Sweep Elbows (Spline x Spline)

Page 189

Figure 72915Caps & Plugs

(Spline)Page 190

Figure 72916Flange Adapters (Spline x Flange)

Page 190

Figure 72917Tees

(Spline x Spline x Spline)Page 191

Figure 72918Reducing Tees

(Spline x Spline x Spline)Page 191

Figure B8200LButterfly Valves (Spline x Spline)

Page 192

Figures 72999, 72899, and ITGMSpare Parts

Pages 193 - 194

G-MINE PVC Systems Table of Contents




G-MINE

Systems

181

Approvals:

except for SDR 13.5 which is NSF-61.

Materials:

Vinyl Chloride) conforming to ASTM D 1784.

3139.

(NBR) or Polyisoprene Rubber conforming to ASTM F 477.

Polyvinylidene Flouride.

PVC Temperature Service Factor:

water environment of 23°C (73.4°F) ± 2°C (±3.6°F). As the temperature of the environment increases, PVC Pipe becomes more ductile. This is represented by the graph (Figure 1).

impact strength increases and the tensile strength decreases as the temperature rises. Because of this effect, the pressure rating of the pipe and fittings must be decreased to allow for safe operation of the line at elevated temperatures.

G-MINE PVC SystemsTech Data Sheet: G590

70 80 90 100 110 120 130 140

PV

C S

ER

VIC

E F

AC

TO

R

TEMPERATURE, °F

0

0.20

0.40

0.60

0.80

1.00

0.40

0.75

1.000.88

0.620.50

0.300.22

FIGURE 1 PVC TEMPERATURE

SERVICE FACTOR

Pipe Specifications:

Nominal Property Values

Pipe Property Test Method Value

Izod Impact ASTM D 256 16.8 N/m of Notch 1.15 Ft.-Lbs./In.

Tensile Strength ASTM D 638 482 Bar7.000 psi

Modulus of Elasticity ASTM D 638 27579 Bar

400.000 psiDeflection

Temperature ASTM D 648 70°C158°F

Flammability ASTM D 635 Self-Extinguishing

Pipe Impact Strength Production Specification

Nominal Size mm

Inches

SDR 21 N/m

Ft. - Lbs.

SDR 17 N/m

Ft. - Lbs.

SDR 13.5* N/m

Ft. - Lbs.50 - 2480 24802 — 170 170

80 - 3575 35753 — 245 245

100 3721 4670 46704 255 320 320

150 5545 6859 68596 380 470 470

200 7223 8902 89028 495 610 610

* High-pressure pipe

www.grinnell.com


G-MINE

Systems


Figure 72900 SDR Pipe(Spline x Spline)Tech Data Sheet: G590

The GRINNELL Figure 72900 G-MINE PVC Pipe provides a flexible piping system that is non-corrosive and resistant to harsh environments, acids, and most chemicals. Its specially formulated compound contains impact modifiers and UV (Ultraviolet) inhibitors that provide higher impact strength over an extended period of time. Pipe is available in 5.8m (19 foot) laying lengths.

GROOVE DETAIL

O.D.

SEE GROOVE DETAIL15°P

G2 O.D.

G1C

PIPE LENGTH, 20'-0"

Part Number

Pipe Size

SDR

Max. Pressure

RatingBarpsi

Pmm

Inches

Cmm

Inches

G1 Widthmm

Inches

G2 Depthmm

Inches

Min. Wall Thk.mm

Inches

Approx. Pipe

Weight Kg/M

Lbs./Ft.

Nominal mm

Inches

O.D.mm

Inches

7290020E50 60.3

SDR 1717.2 4.8 44.5 6.4 2.5 3.6 0.3

2 2.375 250 0.188 1.75 0.250 0.100 0.140 0.64

7290030E80 88.9

SDR 1717.2 4.8 63.5 9.5 3.4 5.2 0.6

3 3.50 250 0.188 2.50 0.375 0.135 0.206 1.37

7290040LE100 114.3

SDR 2113.8 4.8 76.2 9.5 3.4 5.4 0.8

4 L 4.50 200 0.188 3.00 0.375 0.135 0.214 1.86

7290040E100 114.3

SDR 1717.2 4.8 76.2 9.5 3.4 6.7 1.0

4 4.50 250 0.188 3.00 0.375 0.135 0.265 2.25

7290040HE100 114.3

SDR 13.521.7 4.8 76.2 9.5 3.4 8.5 1.3

4 H 4.50 315 0.188 3.00 0.375 0.135 0.333 2.85

7290060LE150 168.3

SDR 2113.8 8.0 76.2 9.5 3.4 8.0 1.8

6 L 6.625 200 0.313 3.00 0.375 0.135 0.316 3.99

7290060E150 168.3

SDR 1717.2 8.0 76.2 9.5 3.4 9.9 2.2

6 6.625 250 0.313 3.00 0.375 0.135 0.390 4.87

7290060HE150 168.3

SDR 13.521.7 8.0 76.2 9.5 3.4 12.5 2.8

6 H 6.625 315 0.313 3.00 0.375 0.135 0.491 6.07

7290080LE200 219.1

SDR 2113.8 16.7 80.3 12.7 3.7 10.4 3.0

8 L 8.625 200 0.625 3.16 0.500 0.145 0.410 6.71

7290080E200 219.1

SDR 1717.2 16.7 80.3 12.7 3.7 12.9 3.7

8 8.625 250 0.625 3.16 0.500 0.145 0.508 8.16

7290080HE200 219.1

SDR 13.521.7 16.7 80.3 12.7 3.7 16.2 4.7

8 H 8.625 315 0.625 3.16 0.500 0.145 0.639 10.30

Laying length is 5,8m (19 foot). G-MINE Pipe is produced with thickened ends to accommodate the G-MINE groove while maintaining their designed pressure rating.

Grooving the non-thickened pipe body will result in less-than-designed pressure rating for the new joint and ultimately the entire system. When fabrication is required for non-thickened end products, apply a Figure 72905 G-MINE x Solvent Weld Transition Coupling.

250 and 300mm (10" and 12" ) are available upon request. Contact a GRINNELL Sales Representative.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



G-MINE

Systems

183

The GRINNELL Figure 72904 G-MINE Coupling provides a connection between two pieces of G-MINE PVC Pipe. G-MINE Couplings are designed for non-permanent use applications and are supplied with O-rings (gaskets) for ease of assembly and disassembly.

Figure 72904 Couplings(Spline x Spline)Tech Data Sheet: G590

L

B.O.D.

The GRINNELL Figure 72905 G-MINE Transition Coupling (Female x Solvent Weld) provides an efficient transition from G-MINE PVC Pipe to plain-end PVC pipe.

Figure 72905 Couplings(Spline x Solvent Weld)


L2

B.O.D.

L1

Part Number

Nominal Sizemm

Inches

B.O.D.mm

Inches

Lmm

Inches

Max. Pressure

RatingBarpsi

Approx. Weight

kgLbs.

729042050 81 133.4 17.2 0.52 3.20 5.25 250 1.05

729043080 111 184.2 17.2 1.03 4.375 7.25 250 2.17

7290440100 139 209.6 17.2 2.24 5.47 8.25 250 4.92

7290440H100 151 209.6 21.7 2.34H 5.96 8.25 315 5.00

7290460150 199 209.6 17.2 2.86 7.84 8.25 250 6.20

7290460H150 213 209.6 21.7 4.76 H 8.37 8.25 315 10.40

7290480200 259 257.3 17.2 5.08 10.19 10.125 250 10.93

7290480H200 278 257.3 21.7 9.18 H 10.95 10.125 315 20.00

G-MINE Gaskets (O-rings) and Splines included.10" and 12" (250 and 300mm) are available upon request. Contact a GRINNELL Sales

Representative.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15


Part Number

Nominal Sizemm

Inches

B.O.D.mm

Inches

Max.Pressure

RatingBarpsi

L1mm

Inches

L 2mm

Inches

Approx. Weight

kgLbs.

729052050 81.3 17.2 139.7 60.5 0.52 3.20 250 5.50 2.375 1.00

729053080 111.1 17.2 203.2 88.9 1.03 4.375 250 8.00 3.50 2.20

7290540100 138.9 17.2 228.6 101.6 1.64 5.47 250 9.00 4.00 3.50

7290560150 199.1 17.2 228.6 101.6 2.9

6 7.84 250 9.00 4.00 6.40

7290580200 258.8 17.2 257.3 114.3 5.18 10.19 250 10.125 4.50 11.30

G-MINE Gasket O-ring and Spline included.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15


www.grinnell.com


G-MINE

Systems


Figure 72919 Reducing Couplings(Male Spline x Female Spline)Tech Data Sheet: G590

The GRINNELL Figure 72919 G-MINE Reducing Coupling (Female x Male) allows for a direct transition between two different pipe sizes.

B.O.D.

L O.D.

Figure 72940 Outlet Couplings(Male Spline x Female Spline x Female Thread)Tech Data Sheet: G590

The GRINNELL Figure 72940 G-MINE Threaded Outlet Coupling (Female x Male x Female NPT) provides a threaded branch outlet connection.

B.O.D.

NPT

O.D.

L1

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

B.O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729194020100 x 50 60.3 139 17.2 387.4 2.3

4 x 2 2.375 5.47 250 15.25 5.00

729194030100 x 80 88.9 139 17.2 420.6 2.6

4 x 3 3.50 5.47 250 16.56 5.70

729196020150 x 50 60.3 199 17.2 400.1 4.7

6 x 2 2.375 7.84 250 15.75 10.40

729196030150 x 80 88.9 199 17.2 419.1 5.0

6 x 3 3.50 7.84 250 16.50 11.00

729196040150 x 100 114.3 199 17.2 441.5 5.0

6 x 4 4.50 7.84 250 17.38 11.10

729198020200 x 50 60.3 259 17.2 431.8 5.0

8 x 2 2.375 10.19 250 17.00 11.10

729198040200 x 100 114.3 259 17.2 397.0 10.9

8 x 4 4.50 10.19 250 15.63 24.10

729198060200 x 150 168.3 259 17.2 469.9 11.2

8 x 6 6.625 10.19 250 18.50 24.60

G-MINE Gasket (O-ring) and Spline included.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15


Part Number

Nominal SizeRun x OutletInches x NPT

O.D.mm

Inches

B.O.D.mm

Inches

Max.Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

72940207550 x 20 60.3 81 17.2 257.3 0.7

2 x 34 2.375 3.20 250 10.13 1.60

72940201050 x 25 60.3 81 17.2 257.3 0.7

2 x 1 2.375 3.20 250 10.13 1.50

72940301580 x 40 88.9 111 17.2 342.9 1.6

3 x 1 12 3.50 4.375 250 13.50 3.60

729404015100 x 40 114.3 139 17.2 381.0 2.6

4 x 1 12 4.50 5.47 250 15.00 5.80

729406015150 x 40 168.3 199 17.2 431.8 5.2

6 x 1 12 6.625 7.84 250 17.00 11.50

729408020200 x 40 219.1 259 17.2 482.6 9.3

8 x 1 12 8.625 10.19 250 19.00 20.60

G-MINE Gasket (O-ring) and Spline included.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or




G-MINE

Systems

185

Figure 72906 Nipples(Spline x Plain End)


The GRINNELL Figure 72930 G-MINE Threaded Outlet Coupling (Female x Female x Female NPT) provides a connection between two pieces of G-MINE PVC Pipe and includes a threaded branch connection.

Figure 72930 Outlet Couplings(Spline x Spline x Female Thread)


NPT

B.O.D.

L

The GRINNELL Figure 72906 G-MINE Nipple (Male x Plain-End) provides an economical and efficient method of converting a solvent weld-end pipe run to a G-MINE grooved connection.

O.D.

L

Part Number

Nominal SizeRun x OutletInches x NPT

B.O.D.mm

Inches

Max. Pressure Rating

Barpsi

Lmm

Inches

Approx. Weight

kgLbs.

72930207550 x 20 81 13.8 177.8 0.72 x 3

4 3.20 200 7.00 1.50

72930201050 x 25 81 13.8 177.8 0.62 x 1 3.20 200 7.00 1.40

72930307580 x 20 111 13.8 241.3 1.23 x 3

4 4.375 200 9.50 2.60

72930301080 x 25 111 13.8 241.3 1.33 x 1 4.375 200 9.50 2.90

72930301580 x 40 111 11.0 241.3 1.23 x 1 1

2 4.375 160 9.50 2.70

729304075100 x 20 139 13.8 266.7 1.94 x 3 4 5.47 200 10.50 4.10

729304010100 x 25 139 13.8 266.7 1.9

4 x 1 5.47 200 10.50 4.10

729304015100 x 40 139 11.0 266.7 1.84 x 1 1

2 5.47 160 10.50 4.00

729306075150 x 20 199 13.8 285.8 3.66 x 3 4 7.84 200 11.25 7.90

729306010150 x 25 199 13.8 285.8 3.6

6 x 1 7.84 200 11.25 7.90

729306015150 x 40 199 13.8 285.8 3.66 x 1 1

2 7.84 200 11.25 7.90

729308010200 x 25 259 13.8 317.5 6.8

8 x 1 10.19 200 12.50 15.00

729308015200 x 40 259 13.8 317.5 6.88 x 1 1

2 10.19 200 12.50 15.00

G-MINE Gaskets (O-rings) and Splines included.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page


Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729062050 60.3 17.2 177.8 0.32 2.375 250 7.00 0.60

729063080 88.9 17.2 228.6 0.63 3.50 250 9.00 1.40

7290640100 114.3 17.2 254.0 1.04 4.50 250 10.00 2.30

7290660150 168.3 17.2 304.8 2.46 6.625 250 12.00 5.20

7290680200 219.1 17.2 330.2 4.48 8.625 250 13.00 9.70

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page


www.grinnell.com


G-MINE

Systems


The GRINNELL Figure 72907 G-MINE Transition Coupling (G-MINE x Grooved) provides an efficient transition from G-MINE PVC Pipe to grooved steel pipe that meets AWWA C-606 IPS Groove Standards.

Figure 72907 Nipples(Spline x Groove)Tech Data Sheet: G590

O.D.

L

The GRINNELL Figure 72908 G-MINE Threaded Nipple (Male x Male NPT) provides an economical and efficient method of connecting a G-MINE piping system to a female threaded adapter or device.

Figure 72908 Nipples(Spline x Male Thread)Tech Data Sheet: G590

O.D.

L

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729072050 60.3 17.2 177.8 0.32 2.375 250 7.00 0.60

729073080 88.9 17.2 228.6 0.73 3.50 250 9.00 1.60

7290740100 114.3 17.2 254.0 1.14 4.50 250 10.00 2.50

7290740H100 114.3 17.2 254.0 1.44 H 4.50 250 10.00 3.10

7290760150 168.3 17.2 304.8 2.46 6.625 250 12.00 5.20

7290760H150 168.3 17.2 304.8 3.36 H 6.625 250 12.00 7.20

7290780200 219.1 17.2 342.9 4.18 8.625 250 13.50 9.00

Requires thrust blocking to eliminate end loads; use only with GRINNELL Flexible Couplings only.

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15


Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729082050 60.3 13.8 177.8 0.32 2.375 200 7.00 0.60

729083080 88.9 13.1 228.6 0.63 3.50 190 9.00 1.30

7290840100 114.3 11.0 254.0 1.14 4.50 160 10.00 2.40

7290860150 168.3 9.7 304.8 2.46 6.625 140 12.00 5.20

7290880200 219.1 8.3 330.2 4.18 8.625 120 13.00 9.00





G-MINE

Systems

187

The GRINNELL Figure 72909 G-MINE Threaded Nipple (Plain-end x Male NPT) provides an economical and efficient method of connecting a solvent weld-end pipe run to a female threaded adapter or device.

Figure 72909 Nipples(Plain End x Male Thread)


O.D.

L

The GRINNELL Figure 72911 G-MINE Nipple (Male x Male) provides an economical and efficient method of connecting two female G-MINE components.

Figure 72911 Nipples(Spline x Spline)Tech Data Sheet: G590

O.D.

L

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729092050 60.3 13.8 133.4 0.32 2.375 200 5.25 0.60

729093080 88.9 13.1 165.1 0.63 3.50 190 6.50 1.25

7290940100 114.3 11.0 177.8 1.14 4.50 160 7.00 2.50

7290960150 168.3 9.7 228.6 2.6

6 6.625 140 9.00 5.70

7290980200 219.1 8.3 248.9 4.78 8.625 120 9.80 10.25



Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

7291140100 114.3 17.2 254.0 1.04 4.50 250 10.00 2.30

7291160150 168.3 17.2 304.8 2.46 6.625 250 12.00 5.20

7291180200 219.1 17.2 330.2 4.48 8.625 250 13.00 9.70



www.grinnell.com


G-MINE

Systems


The GRINNELL Figure 72910 G-MINE 90° Degree Elbow (Male x Male) provides an economical and efficient method of changing pipe direction.

Figure 72910 90° Elbows(Spline x Spline)Tech Data Sheet: G590

O.D.

L

L

The GRINNELL Figure 72912 G-MINE 45° Degree Elbow (Male x Male) provides an economical and efficient method of changing pipe direction.

Figure 72912 45° Elbows(Spline x Spline)Tech Data Sheet: G590

O.D.

L

L

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729102050 60.3 17.2 203.2 0.82 2.375 250 8.00 1.70

729103080 88.9 17.2 258.6 1.93 3.50 250 10.18 4.10

7291040100 114.3 17.2 314.5 3.44 4.50 250 12.375 7.50

72910460150 168.3 17.2 397.0 7.96 6.625 250 15.625 17.40

7291080200 219.1 17.2 457.2 15.38 8.625 250 18.00 33.70



Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Approx. Weight

kgLbs.

729122050 60.3 17.2 196.9 0.72 2.375 250 7.75 1.60

729123080 88.9 17.2 247.7 1.83 3.50 250 9.75 3.90

7291240100 114.3 17.2 285.8 3.24 4.50 250 11.25 7.10

7291260150 168.3 17.2 330.2 7.36 6.625 250 13.00 16.10

7291280200 219.1 17.2 381.0 14.08 8.625 250 15.00 30.90





G-MINE

Systems

189

The GRINNELL Figure 72913 G-MINE 90° Degree Sweep Elbow provides an economical and efficient method of changing pipe direction.

Figure 72913 90° Sweep Elbows(Spline x Spline)Tech Data Sheet: G590

L

O.D.

90°

W

The GRINNELL Figure 72914 G-MINE 45° Degree Sweep Elbow provides an economical and efficient method of changing pipe direction.

Figure 72914 45° Sweep Elbows(Spline x Spline)Tech Data Sheet: G590

L

O.D.

45°

W

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Wmm

Inches

Approx. Weight

kgLbs.

729132050 60.3 17.2 408 408 1.12 2.375 250 16.06 16.06 2.40

729133080 88.9 17.2 587.4 587.4 2.93 3.50 250 23.125 23.125 6.40

7291340100 114.3 17.2 408.0 408.0 5.84 4.50 250 30.25 30.25 12.70

72913240H100 114.3 21.7 768.4 768.4 6.84 H 4.50 315 30.25 30.25 14.90

7291360150 168.3 17.2 1066.8 1066.8 14.16 6.625 250 42.00 42.00 31.00

7291360H150 168.3 21.7 1066.8 1066.8 20.66 H 6.625 315 42.00 42.00 45.30

7291380200 219.1 17.2 1184.3 1184.3 26.88 8.625 250 46.625 46.625 59.00

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales



Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Wmm

Inches

Approx. Weight

kgLbs.

729142050 60.3 17.2 460.4 190.5 0.92 2.375 250 18.125 7.50 2.00

729143080 88.9 17.2 652.5 273.1 2.23 3.50 250 25.69 10.75 4.90

7291440100 114.3 17.2 730.3 301.6 3.44 4.50 250 28.75 11.875 7.50

7291440H100 114.3 21.7 730.3 301.6 5.34 H 4.50 315 28.75 11.875 11.60

7291460150 168.3 17.2 995.4 412.8 8.36 6.625 250 39.19 16.25 18.30

7291460H150 168.3 21.7 995.4 412.8 11.96 H 6.625 315 39.19 16.25 26.20

7291480200 219.1 17.2 1320.8 547.7 15.98 8.625 250 52.00 21.57 35.00

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales



www.grinnell.com


G-MINE

Systems


The GRINNELL Figure 72915 G-MINE End Plug and End Cap provide an economical and efficient method of capping a piping system.

Figure 72915 Caps & Plugs(Spline)Tech Data Sheet: G590

B.O.D.

L

L

O.D.

The GRINNELL Figure 72916 G-MINE Flange Adapter provides a direct transition from flanged components to G-MINE PVC piping components.

Figure 72916 Flange Adapters (Spline x Flange 150psi)Tech Data Sheet: G590

ABOLTSIZE

O.D.1 O.D.2

LR

Figure 72915 End Cap (Female Spline)

Figure 72915 End Plug (Male Spline)

Figure 72915 End Plug

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches


Barpsi

Lmm

Inches

Approx. Weight

kgLbs.

729152050 60 17.2 190.5 0.42 2.375 250 7.50 0.90

729153080 89 17.2 254.0 0.93 3.50 250 10.00 2.00

Figure 72915 End Cap*

Part Number

Nominal Sizemm

Inches

B.O.D.mm

Inches


Barpsi

Lmm

Inches

Approx. Weight

kgLbs.

7291540100 139 17.2 228.6 1.94 5.47 250 9.00 4.20

7291560150 199 17.2 228.6 4.16 7.84 250 9.00 9.00

7291580200 259 17.2 257.3 7.78 10.19 250 10.125 17.00

* G-MINE Gasket (O-ring) and Spline included.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales

Representative.For instructions on part numbers, ordering information, and availability,


Part Number

Nominal Sizemm

Inches

Outlet 1 O.D.mm

Inches


Barpsi

Lmm

Inches

Flange 2 O.D.mm

Inches

R mm

Inches

Bolt Circle Diameter

mmInches

Bolt Size

Bolt Holes

Approx. Weight

kgLbs.

729162050 60.3 10.3 182.6 152.4 20.6 120.7 5

8 40.7

2 2.375 150 7.19 6.00 0.81 4.75 1.6

729163080 88.9 10.3 235.0 190.5 26.9 152.4 5

8 41.5

3 3.50 150 9.25 7.50 1.06 6.00 3.2

7291640100 114.3 10.3 260.4 228.6 28.7 190.5 5

8 82.3

4 4.50 150 10.25 9.00 1.125 7.50 5.0

7291660150 168.3 10.3 316 279.4 32.5 241.3 3

4 84.1

6 6.625 150 12.44 11.00 1.28 9.50 9.0

7291680200 219.1 10.3 339.9 342.9 35.1 298.5 3

4 87.3

8 8.625 150 13.38 13.50 1.375 11.75 16.0

All flanges are Van Stone style with glass-filled PVC ring.ANSI Class 125 and 150 bolt pattern.See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



G-MINE

Systems

191

The GRINNELL Figure 72917 G-MINE Tee (Male) provides an economical and efficient method of adding a G-MINE PVC Branch Run to a piping system.

Figure 72917 Tees(Spline x Spline x Spline)


L

F

O.D.

O.D.

The GRINNELL Figure 72918 G-MINE Reducing Tee (Male) provides an economical and efficient method of adding a reduced diameter G-MINE PVC Branch Run to a piping system.

Figure 72918 Reducing Tees(Spline x Spline x Spline)


L

F

O.D.1

O.D.2

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Max. Pressure

RatingBarpsi

Lmm

Inches

Fmm

Inches

Approx. Weight

kgLbs.

729172050 60.3 17.2 419.1 276.4 1.02 2.375 250 16.50 10.875 2.30

729173080 88.9 17.2 546.1 280.0 2.63 3.50 250 21.50 11.25 5.80

7291740100 114.3 17.2 628.7 314.5 4.94 4.50 250 24.75 12.375 10.70

7291760150 168.3 17.2 787.4 393.7 11.36 6.625 250 31.00 15.50 25.00

7291780200 219.1 17.2 920.8 450.9 21.88 8.625 250 36.25 17.75 48.00

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to


Part Number

Nominal Size Run x Run x Branch

mmInches

Run O.D. 1

mmInches

Outlet O.D. 2

mmInches

Max.Pressure

RatingBarpsi

Lmm

Inches

Fmm

Inches

Approx. Weight

kgLbs.

72918302080 x 50 88.9 60.3 17.2 533.4 224.5 2.33 x 2 3.50 2.375 250 21.00 8.84 5.00

729184020100 x 50 114.3 60.3 17.2 581.2 240.5 4.6

4 x 2 4.50 2.375 250 22.875 9.47 10.10

729184030100 x 80 114.3 88.9 17.2 614.4 296.2 4.9

4 x 3 4.50 3.50 250 24.19 11.66 10.80

729186020150 x 50 168.3 60.3 17.2 714.5 298.5 10.4

6 x 2 6.625 2.375 250 28.125 11.75 22.83

729186030150 x 80 168.3 88.9 17.2 714.5 323.9 11.0

6 x 3 6.625 3.50 250 28.125 12.75 24.20

729186040150 x 100 168.3 114.3 17.2 741.4 349.3 11.1

6 x 4 6.625 4.50 250 29.19 13.75 24.40

729188060200 x 150 219.1 168.3 17.2 850.9 427.0 23.1

8 x 6 8.625 6.625 250 33.50 16.81 50.90

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page


www.grinnell.com


G-MINE

Systems


Model B8200L G-MINE Butterfly Valves(Spline x Spline) Tech Data Sheet: G592

MATERIAL SPECIFICATIONSMaximum Working Pressure

22.1 Bar (320 psi)

Working Temperature Range0°C to 60°C (32°F to 140°F)

BodyDuctile iron conforming to ASTM A 536, Grade 65-45-12

Body CoatingBlack epoxy-coated

DiscDuctile iron conforming to ASTM A 536, Grade 65-45-12

Disc SealGrade “T” Nitrile encapsulated rubber

StemTwo-piece Type 316 Stainless Steel Splines

Stem SealEPDM O-rings, upper and lower stem

HandleZinc-plated carbon steel

GRINNELL Model B8200 Butterfly Valves are designed for use with the G-MINE PVC Piping System. Available sizes include 50 to 200mm (2" to 8") diameters. Precision machined grooves in the valve body provide easy alignment of the valve and G-MINE Coupling, allowing for the insertion of the spline to connect the GRINNELL Model B8200 Valve to the G-MINE PVC System. Flow may enter the valve from either direction and valve can be orientated in any direction.

STEMSEALS

O.D.

HANDLE

BODY

STEM

DISCSEAL

DISC

B

A

L

T/O

Part Number

Nominal Pipe Size Dimensions - mm Inches Approx.Weight

kgLbs.

ANSImm

Inches

O.D.mm

InchesA B L T/O

B82002050 60.3 202.0 131.0 191.1 61.0 4.02 2.375 7.95 5.16 7.50 2.40 8.8

B82003080 88.9 202.0 146.0 233.2 55.1 8.03 3.500 7.95 5.75 9.18 2.17 17.6

B820040100 114.3 202.0 179.0 258.6 52.8 12.04 4.500 7.95 7.05 10.18 2.08 26.4

B820060150 168.3 261.0 213.1 264.6 58.7 23.06 6.625 10.28 8.39 10.41 2.31 50.6

B820080200 219.1 315.0 238.0 278.5 50.8 34.08 8.625 12.40 9.37 10.96 2.00 74.9

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.



G-MINE

Systems

193

The GRINNELL Figure ITGM G-MINE Spline Insertion Tool assists with the insertion of the spline into the groove, locking the fitting to the pipe.

Figure ITGM Insertion ToolsTech Data Sheet: G590

PLUNGER

HANDLE

LOAD SPLINEINTO BARREL

SPLINE(NOT INCLUDED

WITH TOOL)

BARREL

POINTEDINSERTION END

OF SPLINEFLANGE

The GRINNELL Figure 72999 G-MINE Spline securely locks the coupling or fitting to the pipe. The spline is made of Nylon and is also available in Acid-Resistant Polypropylene.

Figure 72999 SplinesTech Data Sheet: G590

L

C.S.DIA.

INSERTION END

Part Number

Nominal Sizemm

Inches

Lmm

Inches

Cross Section Diameter C.S.

mmInches

Configuration

729992050 266.7 4.8

ROUND2 10.50 0.19

729993080 406.4 6.4

ROUND3 16.00 0.25

7299940100 457.2 6.4

ROUND4 18.00 0.25

7299940H100 457.2 6.4

SQUARE4 H 18.00 0.25

7299960150 609.6 6.4

ROUND6 24.00 0.25

7299960H150 609.6 6.4

SQUARE6 H 24.00 0.25

7299980200 812.8 8.0

SQUARE8 32.00 0.31



Part Number

Nominal Size mm

Inches

ITGM 3680 - 150

3 - 6

ITGM 82008

See G-MINE specifications on page 181.For information on alternative sizes, contact a

GRINNELL Sales Representative.For instructions on part numbers, ordering

information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

www.grinnell.com


G-MINE

Systems


The GRINNELL Figure 72899 G-MINE Gasket (O-ring) provides a hydraulic seal. Most G-MINE Fittings and Couplings are manufactured to include an O-ring, a flexible elastomeric seal. G-MINE O-rings are Teflon-coated, Nitrile Butadiene Rubber (NBR) or Polyisoprene Rubber conforming to ASTM F 477 (Solvent weld and plain end fittings are designed for use without o-ring).

Figure 72899 Replacement GasketsTech Data Sheet: G590

C.S.

DIA.O.D.

* Registered trademark of Dupont.

Part Number

Nominal Sizemm

Inches

O.D.mm

Inches

Cross Section

Diameter C.S.mm

Inches

MaterialTeflon*-Coated

728992050 70.4 5.3

Nitrile Butadiene Rubber2 2.770 0.210

728993080 98.9 5.3


7289940100 124.3 5.3


7289960150 182.3 7.0


7289980200 237.5 9.5

Polyisoprene Rubber8 9.350 0.375

See G-MINE specifications on page 181.For information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact

a GRINNELL Sales Representative.

PLAIN END SYSTEMS

195

www.grinnell.com

PLAIN END SYSTEMS

Plain End

Systems


Figure 909Plain End Couplings

Page 198

Figure 910Plain End 90° Elbows

Page 199

Figure 901Plain End 45° Elbows

Page 199

Figure 910LRPlain End Long Radius

90° ElbowsPage 200

Figure 901LRPlain End Long Radius

45° ElbowsPage 200

Figure 919Plain End Tees

Page 201

Figure 927Plain End Crosses

Page 201

Figure 960Plain End Caps

Page 202

Figure 924Plain End True Wyes

Page 202

Figure 921Plain End Reducing Tees

Page 203

Figure 914Plain End Laterals

Page 203

Figure 999Plain End Swaged Nipples

Page 204

Figures 991, 992 & 993Plain End Adapter Nipples

Page 205

Figure 941 & 942Plain End Flange Adapters

Page 206

Plain End Systems Table of Contents



PLAIN END SYSTEMS

Plain End

Systems

197

The GRINNELL Plain End Piping System is designed for use in both maintenance and new system applications and eliminates the need for pipe end preparation. The GRINNELL Figure 909 Plain End Coupling features case-hardened gripping teeth that securely grip onto the pipe surface. The coupling is designed for schedule 40 steel pipe and is not for use with steel pipe with a Brinell hardness greater than 150 HB, nor is it switchable for plastic pipe, cast, or ductile iron pipe.

Contact a GRINNELL Sales Representative about other materials and pipe schedules. Follow bolt torque ratings to ensure a properly assembled coupling.

Coupling Ductile Iron Housing Specifications


(65,000 psi)

(45,000 psi)

(2"), minimum 12%

galvanizing

Coatings

Bolt/Nut SpecificationsANSI: Carbon steel oval neck bolts and nuts are heat-treated and conform to the physical properties of ASTM A 183 Grade 2 and SAE J429 Grade 5 with a minimum tensile strength of 7584 Bar (110,000 psi). Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 183 Grade 2 and SAE J995 Grade 5. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

Metric: Carbon steel oval neck track head bolts (Gold colour coded) are heat treated and conform to the physical properties of ASTM F 568 M with a minimum tensile strength of 760 MPa. Carbon Steel heavy hex nuts conform to the physical properties of ASTM A 563 M Class 9. Bolts and nuts are zinc-electroplated conforming to ASTM B 633.

request.


code stripe identification and conform to ASTM D 2000 for service temperatures from -34°C to 110°C (-30°F to 230°F). They are recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air, and many chemical services. They are not recommended for petroleum services. For low temperature and vacuum systems, a Tri-Seal Grade “E” EPDM gasket with rigid coupling is recommended.

gaskets have an Orange colour code stripe identification and conform to ASTM D 2000 for service temperatures from -29°C to 82°C (-20°F to 180°F). They are recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapors.

Fitting Specifications

(60,000 psi)

2413 Bar (35,000 psi)

(1 1⁄4" – 10") – Schedule 40

(12" – 24") – Std. Wall 9.5mm (0.375)

Coatings


Fitting SpecificationsTech Data Sheet: G192

Coupling SpecificationsTech Data Sheet: G190

Plain end fittings are manufactured to provide minimum pressure drop and uniform flow. Fittings are designed for use with the Figure 909 Plain End Couplings only.

Plain end fittings are available in a variety of styles.

Fitting dimensions may vary, contact a GRINNELL Sales Representative.

Gasket

Housing Segment

Bolt / Nut

Hardened Steel Jaws

Steel Pipe 50 - 400mm (2" – 16")(Hardness HB 150 max.)

www.grinnell.com

PLAIN END SYSTEMS

Plain End

Systems


The GRINNELL Figure 909 Plain End Coupling utilizes hardened gripping teeth to securely grip onto plain and beveled end pipe surfaces. It is capable of pressures up to 51.7 Bar (750 psi) depending on pipe size and wall thickness.

The GRINNELL Figure 909 Plain End Coupling is designed for Schedule 40 steel pipe and is not for use with steel pipe with a Brinnell hardness greater than 150 HB, plastic, cast, or ductile iron pipes. Contact a GRINNELL Sales Representative for recommendations on other materials and pipe schedules.

50mm - 150mm (2" - 6") (2 Bolts) 200mm - 400mm (8" - 16") (4 Bolts)

BC

CB

A A

Figure 909 Plain End CouplingsTech Data Sheet: G190

Part Number


Barpsi

Max.†End Load

kNLbs.


Kg.Lbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesQty.

Sizemm

Inches

909AE006050 60.3 51.7 14.78 93.7 146.1 84.1

2M16 x 90 2.4

2 2.375 750 3322.6 3.69 5.75 3.31 58 x 3 1

2 5.4

909AE007365 73.0 41.4 17.33 105.9 158.8 84.1

2M16 x 90 2.7

2 12 2.875 600 3895.1 4.17 6.25 3.31 5

8 x 3 12 5.9

909AE007665 76.1 41.4 23.00 111.9 181.1 98.6

2M20 x 121 2.1

76.1mm 3.000 600 5,170.6 4.41 7.13 3.88 34 x 4 3

4 4.6

909AE008980 88.9 41.4 25.68 122.2 192.0 84.1

2M20 x 121 4.1

3 3.500 600 5772.7 4.81 7.56 3.31 34 x 4 3

4 9.0

909AE0114100 114.3 31 31.83 150.6 219.2 98.6

2M20 x 121 6.1

4 4.500 450 7,156.9 5.93 8.63 3.88 34 x 4 3

4 13.5

909AE0165150 165.1 20.7 44.30 203.7 293.7 293.6

2M24 x 165 9.8

165.1mm 6.500 300 9,959.0 8.02 11.56 11.56 1 x 6 12 21.6

909AE0168150 168.3 20.7 46.00 208.0 296.7 108.0

2M24 x 165 10.7

6 6.625 300 10,341.5 8.19 11.68 4.25 1 x 6 12 23.5

909AE0219200 219.1 17.2 64.97 271.5 346.2 124.7

4M22 x 140 15.9

8 8.625 250 14,606.6 10.69 13.63 4.91 78 x 5 1

2 35.1

909AE0273250 273.0 17.2 100.93 333.5 403.4 124.7

4M22 x 140 22.0

10 10.750 250 22,690.6 13.13 15.88 4.91 78 x 5 1

2 48.5

= 1 for red paint finish, 2 for hot dipped galvanised finish† Maximum Pressure and End Load are total from all loads based on standard weight steel pipe. Pressure ratings and end loads may differ for other pipe materials and/or wall thickness. Contact a GRINNELL Sales Representative for details. For information on alternative sizes, contact a GRINNELL Sales Representative.See page 197 for plain end coupling specifications and pages 234 - 245 for gasket information.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.


PLAIN END SYSTEMS

Plain End

Systems

199

C to E C to E

Figure 910 90° Plain End Elbows


Figure 901 45° Plain End Elbows


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 120.7 0.82 2.375 4.75 1.8

65 73.0 139.7 1.42 1

2 2.875 5.50 3.1

65 76.1 139.7 1.576,1mm 3.000 5.50 3.2

80 88.9 158.8 2.23 3.500 6.25 4.8

100 114.3 196.9 3.44 4.500 7.75 7.5

125 139.7 248.0 5.1139,7mm 5.500 9.75 11.3

125 141.3 248.0 5.35 5.563 9.75 11.6

150 165.1 254.0 7.7165,1mm 6.500 10.00 16.9

150 168.3 254.0 7.56 6.625 10.00 16.6

200 219.1 279.4 13.48 8.625 11.00 29.6

250 273.0 292.1 22.010 10.750 11.50 48.5

300 323.9 342.9 30.112 12.750 13.50 66.4


See page 197 for plain end fitting specifications.For instructions on part numbers, ordering information, and


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 79.5 0.62 2.375 3.13 1.3

65 73.0 88.9 1.02 1

2 2.875 3.50 2.1

65 76.1 88.9 1.076,1mm 3.000 3.50 2.2

80 88.9 95.3 1.63 3.500 3.75 3.5

100 114.3 108.0 2.54 4.500 4.25 5.5

125 139.7 127.0 3.5139,7mm 5.500 5.00 7.7

125 141.3 127.0 3.75 5.563 5.00 8.1

150 165.1 146.1 5.0165,1mm 6.500 5.75 11.0

150 168.3 146.1 5.16 6.625 5.75 11.2

200 219.1 152.4 8.68 8.625 6.00 19.0

250 273.0 165.1 12.710 10.750 6.50 28.0

300 323.9 177.8 22.012 12.750 7.00 48.0




www.grinnell.com

PLAIN END SYSTEMS

Plain End

Systems


C to E C to E

Figure 910LR 90° Plain End Long Radius ElbowsTech Data Sheet: G192

Figure 901LR 45° Plain End Long Radius ElbowsTech Data Sheet: G192

Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 108.0 1.22 2.375 4.25 2.7

65 73.0 139.7 1.92 1

2 2.875 5.50 4.2

65 76.1 139.7 2.076,1mm 3.000 5.50 4.4

80 88.9 158.8 2.93 3.500 6.25 6.5

100 114.3 203.3 5.24 4.500 8.00 11.5

125 139.7 248.0 8.6139,7mm 5.500 9.75 19.0

125 141.3 248.0 8.85 5.563 9.75 19.4

150 165.1 282.7 12.0165,1mm 6.500 11.13 26.4

150 168.3 282.7 12.66 6.625 11.13 27.9

200 219.1 358.9 24.78 8.625 14.13 54.5

250 273.0 435.1 47.010 10.750 17.13 103.7

300 323.9 511.3 67.012 12.750 20.13 147.8




Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 79.5 0.82 2.375 3.13 1.8

65 73.0 88.9 1.32 1

2 2.875 3.50 2.9

65 76.1 88.9 1.476,1mm 3.000 3.50 3.1

80 88.9 95.3 2.13 3.500 3.75 4.6

100 114.3 114.3 3.44 4.500 4.50 7.5

125 139.7 127.0 5.7139,7mm 5.500 5.00 12.5

125 141.3 127.0 5.75 5.563 5.00 12.5

150 165.1 149.4 5.4165,1mm 6.500 5.88 12.0

150 168.3 149.4 5.46 6.625 5.88 12.0

200 219.1 181.1 15.48 8.625 7.13 34.0

250 273.0 212.9 25.410 10.750 8.38 56.0

300 323.9 244.6 44.512 12.750 9.36 98.0





PLAIN END SYSTEMS

Plain End

Systems

201

C to E

Figure 919 Plain End Tees


C to E

Figure 927 Plain End Crosses


Pipe SizeC to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 82.6 1.22 2.375 3.25 2.7

65 73.0 95.3 2.02 1

2 2.875 3.75 4.4

65 76.1 95.3 2.976,1mm 3.000 3.75 6.5

80 88.9 108.0 2.93 3.500 4.25 6.5

100 114.3 127.0 4.84 4.500 5.00 10.7

125 139.7 139.7 6.9139,7mm 5.500 5.50 15.2

125 141.3 139.7 7.05 5.563 5.50 15.5

150 165.1 165.1 11.0165,1mm 6.500 6.50 24.2

150 168.3 165.1 10.46 6.625 6.50 23.0

200 219.1 254.0 19.88 8.625 10.00 43.7

250 273.0 292.1 25.910 10.750 11.50 57.0

300 323.9 342.9 49.912 12.750 13.50 110.0




Pipe SizeE to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 108.0 1.72 2.375 4.25 3.7

65 73.0 120.7 2.62 1

2 2.875 4.75 5.8

65 76.1 120.7 2.776,1mm 3.000 4.75 6.0

80 88.9 130.3 3.93 3.500 5.13 8.6

100 114.3 149.4 9.44 4.500 5.88 20.7

125 141.3 175.0 8.45 5.563 6.88 18.5

150 165.1 193.8 12.4165,1mm 6.500 7.63 27.3

150 168.3 193.8 13.06 6.625 7.63 28.6

200 219.1 254.0 21.78 8.625 10.00 48.0

250 273.0 292.1 34.010 10.750 11.50 75.0

300 323.9 342.9 43.412 12.750 13.50 95.8




www.grinnell.com

PLAIN END SYSTEMS

Plain End

Systems


E to E

Figure 960 Plain End CapsTech Data Sheet: G192

C to SE

C to LE

Figure 924 Plain End True WyesTech Data Sheet: G192

Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 108.0 69.9 1.12 2.375 4.25 2.75 2.5

65 73.0 120.7 76.2 2.02 1

2 2.875 4.75 3.00 4.4

80 88.9 130.3 82.6 2.93 3.500 5.13 3.25 6.4

100 114.3 149.4 95.3 4.84 4.500 5.88 3.75 10.5

125 141.3 175.0 101.6 6.95 5.563 6.88 4.00 15.2

150 168.3 193.8 114.3 10.46 6.625 7.63 4.50 22.9

200 219.1 254.0 152.4 19.08 8.625 10.00 6.00 41.9

250 273.0 292.1 165.1 30.010 10.750 11.50 6.50 66.2

300 323.9 342.9 177.8 39.812 12.750 13.50 7.00 87.7




Pipe SizeE to Emm

Inches

Approx.Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 102.0 1.02 2.375 4.00 2.3

65 73.0 127.0 1.42 1

2 2.875 5.00 3.0

80 88.9 152.4 2.03 3.500 6.00 4.5

100 114.3 178.0 3.44 4.500 7.00 7.5

125 141.3 216.0 5.75 5.563 8.50 12.5

150 168.3 254.0 7.76 6.625 10.00 17.0

200 219.1 279.4 13.28 8.625 11.00 29.0

250 273.0 330.2 11.110 10.750 13.00 24.5

300 323.9 355.6 14.112 12.750 14.00 31.0





PLAIN END SYSTEMS

Plain End

Systems

203

C to E

Figure 921 Plain End Reducing Tees


C to LE

C to SEC to LE

Figure 914 Plain End Laterals


Pipe SizeC to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches80 x 80 x 50 88.9 x 88.9 x 60.3 130.3 3.2

3 x 3 x 2 3.500 x 3.500 x 2.375 5.13 7.1

100 x 100 x 50 114.3 x 114.3 x 60.3 149.4 4.14 x 4 x 2 4.500 x 4.500 x 2.375 5.88 9.1

100 x 100 x 65 114.3 x 114.3 x 73.0 149.4 4.34 x 4 x 2 1

2 4.500 x 4.500 x 2.875 5.88 9.5

100 x 100 x 80 114.3 x 114.3 x 88.9 149.4 4.44 x 4 x 3 4.500 x 4.500 x 3.500 5.88 9.7

150 x 150 x 50 168.3 x 168.3 x 60.3 193.8 8.86 x 6 x 2 6.625 x 6.625 x 2.375 7.63 19.4

150 x 150 x 80 168.3 x 168.3 x 88.9 193.8 9.56 x 6 x 3 6.625 x 6.625 x 3.500 7.63 21.0

150 x 150 x 100 168.3 x 168.3 x 114.3 193.8 9.96 x 6 x 4 6.625 x 6.625 x 4.500 7.63 21.8

200 x 200 x 50 219.1 x 219.1 x 60.3 254.0 16.48 x 8 x 2 8.625 x 8.625 x 2.375 10.00 36.2

200 x 200 x 80 219.1 x 219.1 x 88.9 254.0 16.68 x 8 x 3 8.625 x 8.625 x 3.500 10.00 36.5

200 x 200 x 100 219.1 x 219.1 x 114.1 254.0 16.98 x 8 x 4 8.625 x 8.625 x 4.500 10.00 37.2

200 x 200 x 125 219.1 x 219.1 x 141.3 254.0 16.78 x 8 x 5 8.625 x 8.625 x 5.563 10.00 36.8

200 x 200 x 150 219.1 x 219.1 x 168.3 254.0 17.08 x 8 x 6 8.625 x 8.625 x 6.625 10.00 37.4

250 x 250 x 100 273.0 x 273.0 x 114.3 292.1 26.310 x 10 x 4 10.750 x 10.750 x 4.500 11.50 58.0

250 x 250 x 150 273.0 x 273.0 x 168.3 292.1 27.210 x 10 x 6 10.750 x 10.750 x 6.625 11.50 66.0

250 x 250 x 200 323.9 x 323.9 x 219.1 292.1 28.110 x 10 x 8 10.750 x 10.750 x 8.625 11.50 62.0

250 x 250 x 100 323.9 x 323.9 x 168.3 342.9 36.712 x 12 x 6 12.750 x 12.750 x 6.625 13.50 80.9

250 x 250 x 150 323.9 x 323.9 x 219.1 342.9 34.612 x 12 x 8 12.750 x 12.750 x 8.625 13.50 76.3

250 x 250 x 200 323.9 x 323.9 x 273.0 342.9 35.212 x 12 x 10 12.750 x 12.750 x 10.750 13.50 77.6




Pipe SizeC to LE

mmInches

C to SEmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 184.2 69.9 2.02 2.375 7.25 2.75 4.5

65 73.0 197.0 76.2 3.52 1

2 2.875 7.75 3.00 7.7

80 88.9 222.3 82.6 5.03 3.500 8.75 3.25 11.0

100 114.3 273.1 95.3 8.54 4.500 10.75 3.75 18.7

125 141.3 324.0 101.6 13.35 5.563 12.75 4.00 29.4

150 168.3 355.6 114.3 19.16 6.625 14.00 4.50 42.2

200 219.1 457.2 152.4 32.28 8.625 18.00 6.00 70.9

250 273.0 527.1 165.1 30.010 10.750 20.75 6.50 66.2

300 323.9 622.3 177.8 39.812 12.750 24.50 7.00 87.7




www.grinnell.com

PLAIN END SYSTEMS

Plain End

Systems


E to E

Figure 999 Plain End Swaged NipplesTech Data Sheet: G192

Pipe SizeE to Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches65 x 50 73.0 x 60.3 177.8 1.62 1

2 x 2 2.875 x 2.375 7.00 3.5

80 x 50 88.9 x 60.3 203.2 2.33 x 2 3.500 x 2.375 8.00 5.0

80 x 65 88.9 x 73.0 203.2 2.33 x 2 1

2 3.500 x 2.875 8.00 5.0

100 x 50 114.3 x 60.3 228.6 3.64 x 2 4.500 x 2.375 9.00 8.0

100 x 65 114.3 x 73.0 228.6 3.64 x 2 1

2 4.500 x 2.875 9.00 8.0

100 x 80 114.3 x 88.9 228.6 3.64 x 3 4.500 x 3.500 9.00 8.0

125 x 50 141.3 x 60.3 279.4 5.45 x 2 5.563 x 2.375 11.00 12.0

125 x 80 141.3 x 88.9 279.4 5.45 x 3 5.563 x 3.500 11.00 12.0

125 x 100 141.3 x 114.3 279.4 5.45 x 4 5.563 x 4.500 11.00 12.0

150 x 50 168.3 x 60.3 304.8 8.66 x 2 6.625 x 2.375 12.00 19.0

150 x 65 168.3 x 73.0 304.8 8.66 x 2 1

2 6.625 x 2.875 12.00 19.0

150 x 80 168.3 x 88.9 304.8 8.66 x 3 6.625 x 3.500 12.00 19.0

150 x 100 168.3 x 114.3 304.8 8.66 x 4 6.625 x 4.500 12.00 19.0

150 x 125 168.3 x 141.3 304.8 8.66 x 5 6.625 x 5.563 12.00 19.0

200 x 80 219.1 x 88.9 330.2 -8 x 3 8.625 x 3.500 13.00

200 x 100 219.1 x 114.3 330.2 -8 x 4 8.625 x 4.500 13.00

200 x 150 219.1 x 168.3 330.2 -8 x 6 8.625 x 6.625 13.00

250 x 80 273.0 x 88.9 381.0 -10 x 3 10.750 x 3.500 15.00

250 x 100 273.0 x 114.3 381.0 -10 x 4 10.750 x 4.500 15.00

250 x 150 273.0 x 168.3 381.0 -10 x 6 10.750 x 6.625 15.00

250 x 200 273.0 x 219.1 381.0 -10 x 8 10.750 x 8.625 15.00

300 x 150 323.9 x 168.3 406.4 -12 x 6 12.750 x 6.625 16.00

300 x 200 323.9 x 219.1 406.4 -12 x 8 12.750 x 8.625 16.00

300 x 250 323.9 x 273.0 406.4 -12 x 10 12.750 x 10.750 16.00

◆ These sizes are available. Contact a GRINNELL Sales Representative for details.

For information on alternative sizes, contact a GRINNELL Sales Representative.See page 197 for plain end fitting specifications.For instructions on part numbers, ordering information, and availability, refer to



PLAIN END SYSTEMS

Plain End

Systems

205

Figure 991 Fabricated Adapter NipplePlain x Male BSP Thread


Plain x Groove


Plain x Bevel

E to E

E to E

E to E

Figures 991, 992, 993 Plain End Adapter Nipples


Pipe SizeE to E mm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches50 60.3 101.6 0.52 2.375 4.00 1.2

65 73.0 101.6 0.92 1

2 2.875 4.00 1.9

80 88.9 101.6 1.13 3.500 4.00 2.5

100 114.3 154.4 2.44 4.500 6.00 5.4

125 141.3 154.4 3.35 5.563 6.00 7.3

150 168.3 154.4 4.36 6.625 6.00 9.4

200 219.1 154.4 6.48 8.625 6.00 14.2




www.grinnell.com

PLAIN END SYSTEMS

Plain End

Systems


Figure 941 Plain End Flange Adapter

ANSI Class 150#

Figure 942 Plain End Flange Adapter

ANSI Class 300#

E to E E to E

Figure 941 Plain End Flange Adapters (ANSI Class 150#)

Figure 942 Plain End Flange Adapters (ANSI Class 300#)Tech Data Sheet: G192

Pipe Size Figure 941 – ANSI Class 150# Figure 942 – ANSI Class 300#Nominal

mmInches

O.D.mm

Inches

E to Emm

Inches

Mating Flange BoltQty.

Approx. Weightkg

Lbs.

E to Emm

Inches

Mating Flange BoltQty.

Approx. Weightkg

Lbs.50 60.3 101.6

42.8 101.6

83.7

2 2.375 4.00 6.4 4.00 8.2

65 73.0 101.64

4.0 101.68

5.42 1

2 2.875 4.00 8.8 4.00 11.9

80 88.9 101.64

4.7 101.68

7.03 3.500 4.00 10.4 4.00 15.5

100 114.3 152.48

8.3 152.48

12.74 4.500 6.00 18.2 6.00 28.0

125 141.3 152.48

10.0 152.48

16.85 5.563 6.00 22.0 6.00 37.0

150 168.3 152.48

12.7 152.412

21.86 6.625 6.00 28.1 6.00 48.0

200 219.1 152.48

19.8 152.412

35.88 8.625 6.00 43.7 6.00 79.0

For information on alternative sizes, contact a GRINNELL Sales Representative.See Flange Drilling Specifications on page 267.See page 197 for plain end fitting specifications.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

RING JOINTSYSTEMS

207

www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems


Ring Joint Table of ContentsCOUPLING MATERIAL SPECIFICATIONSHousing:

to ASTM A 395, Gr. 65-45-15, min. tensile strength 4481 Bar (65,000 psi).

– Sizes 200 to 650mm (8" to 26”) consist of two housing segments

– 700 to 950mm (28" to 38”) consist of six housing segments

– 1000 to 2400mm (40" to 96”) consist of eight housing segments

Surface Finish:

colours

Weld Rings:

Rubber Gasket: (Colour code: Green stripe)

Good for cold & hot water up to 110°C (230°F). Also good for services for water with acid, water with chlorine, deionized water, seawater and waste water, dilute acids, oil-free air and many chemicals. Not recommended for petroleum oils, minerals oils, solvents and aromatic hydrocarbons. Maximum Temperature Range: -34°C to 110°C (-30°F to 230°F)*. *EPDM gaskets for water services are not recommended for steam services unless couplings or components are accessible for frequent gasket replacement.

(Colour code: Orange stripe) Recommended for petroleum products, air with oil vapors, vegetable and mineral oils within the specified temperature range. Also good for water services under 66°C (150°F). Temperature range: -29°C to 82°C (-20°F to 180°F). Do not use for HOT WATER above 66°C (150°F) or HOT DRY AIR above 60°C (140°F).

Butyl.

For additional details contact a GRINNELL Sales Representative.

Bolts & Nuts: 3⁄4" to 1”): Heat treated carbon steel

track bolts to ASTM A 183 Gr. 2, minimum tensile strength 7584 Bar (110,000 psi), Zinc electroplated, with heavy-duty hexagonal nuts to ASTM A563.

1 1⁄4" to 1 1⁄2") sizes: Carbon steel hex. bolts to ASTM A 307 Gr. A or B, minimum strength 4136 Bar (60,000 psi), Zinc electroplated, with hexagonal nuts to ASTM A 563.

Bronze nut are available upon request.

Model R-88Ring Joint

Pages 210 - 211

Model R-88Large Diameter Ring Joint

Page 212

Model RH-10001000 PSI Ring Joint Coupling

Page 213

Model RX-30003000 PSI Ring Joint Coupling

Page 214

Model RX-37703770 PSI Ring Joint Coupling

Page 215

RJ-1090° Ring Joint Elbow

Page 216

RJ-1145° Ring Joint Elbow

Page 217

RJ-20Ring Joint Tee

Page 217

RJ-21Reducing Tee

Page 218

RJ-50Concentric Reducer

Page 219

RJ-51Eccentric Reducer

Page 219

RJ-6045° Ring Joint Cap

Page 220

RJ-70Flange Adapter

Page 220



RING JOINT SYSTEMS

Ring

Joint

Systems

209

Ring Joint Coupling The ring joint coupling provides a much more secure joint than a comparable roll-grooved system, simply because the contact area of the rings is much greater than that of the roll-groove profile. In addition, the welded rings are able to withstand 2 - 3 times the shearing forces of roll grooves. High pressure couplings up to 260 Bar (3770 psi) are available.

#R-88 Ring Joint Coupling

Factory Supplied Weld Rings

Gasket

Weld Ring

Housing Segment

Bolts & Nuts

Ring Joint SpecificationsShurjoint Tech Data Sheet: O-01

Maximum Internal Service Pressures of Carbon Steel Pipe ASTM A53 Gr. B.

Nominal Sizemm

Inches

XS0.5" Bar psi

STD0.375"*

Bar psi

LW0.25" /

0.312"^Bar psi

200 109.4 69.4 53.68 1586 1006 777

250 87.0 63.0 42.810 1262 913 621300 72.9 54.3 36.012 1058 788 522

350 66.3 49.4 32.814 962 717 475

400 57.8 43.1 28.616 839 625 415

450 51.3 38.3 25.418 744 555 368500 46.1 34.4 22.820 668 499 331600 38.3 28.6 19.024 555 415 275650 35.3 26.3 21.926 512 382 318700 32.8 24.5 20.328 475 355 295750 30.5 22.8 19.030 443 331 275800 28.6 21.4 17.832 415 310 258900 25.4 19.0 15.836 368 275 229950 24.1 18.0 15.038 349 261 217

1000 22.8 17.1 14.240 331 248 206

1050 21.7 16.3 12.942 315 236 187

1100 20.8 15.5 –44 301 225

1200 19.0 14.2 –48 275 206

1300 17.5 13.1 –52 254 190

1350 16.9 12.6 –54 245 183

1400 16.3 12.2 –56 236 177

1500 15.2 11.4 –60 220 165

1650 13.8 10.3 –66 200 150

1700 13.4 10.0 –68 194 145

1800 12.6 9.4 –72 183 137

2100 10.8 8.1 –84 157 118

2400 9.4 7.1 –96 137 103

Except * 200mm (8" ): 8.2mm (0.322" ); 250 to 600mm (10" to 24" ): 6.4mm (0.25" ); 650 to 1050mm (26" to 42" ): 7.9mm (0.312" )

Max. Internal Service Pressures of Carbon Steel Pipe ASTM A53 Gr. B

When designing a piping system you must select pipe with the appropriate wall thickness to correspond with the intended working pressure of the system. The table lists design working pressure by the pipe wall schedule, XS, STD and LW, of representative ASTM A53 Gr. B carbon steel pipe calculated in accordance with the formula stipulated in ASME B31.1 Power Piping 104.1.

2SE (tm-A) P =

Do - 2y (tm - A)

Where: P = Maximum internal service pressure (psi)

SE = Allowable stress (psi) (ASTM A53 Gr. B = 1034 Bar (15,000 psi)

tm = Minimum pipe wall thickness (inch) (87.5% of nominal wall thickness)

Do = Outside diameter of pipe (inch)

y = A coefficient (For ferritic steels 316°C (600°F) or below = 0.4)

A = Additional thickness (inch) (A = 0)


www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems


Shurjoint Model R-88 Ring Joint Couplings(Page 1 of 3)

Shurjoint Tech Data Sheet: O-01


Sizemm

Inches

Nom. Rating



200 - 6008" – 24"

Class 250

20 Bar @38°C300 psi @100°F



65026"

Class 150

20 Bar @38°C300 psi @100°F



700 - 90028" - 36"

Class 150

20 Bar @38°C300 psi @100°F



950 - 240038" – 96"

Class 125

12 Bar @38°C175 psi @100°F





pressure for sizes up to 300mm (12" ) and 2 times for sizes 400mm (14" ) & above.

The Shurjoint Model R-88 Ring Joint Coupling is an ideal pipe joining method when pipe is difficult to groove or when grooving is not the preferred joining method. Available in sizes 200 thru 2400mm (8” to 96”) the R-88 offers ease of use and excellent performance.

The Model R-88 Ring Joint Coupling is supplied with a pair of factory supplied weld rings. For installation weld a factory-supplied weld ring on each pipe end to be connected, next mount the rubber gasket over the pipe ends, place coupling segments over the gasket and fasten the bolts and nuts.

The R-88 Ring Joint Coupling is considered a shoulder coupling with the factory supplied weld rings serving as the joint shoulders. The R-88’s performance standards meet and or exceed the requirements of ASTM F1476 and AWWA C606. The factory supplied weld rings offer a much more economical and convenient alternative to traditional shoulder rings, such as Type A, B, C, D, E, and G rings.

The R-88 Coupling can also be used on stainless steel pipe with optional weld rings available in compatible stainless steel grades. Check with GRINNELL for details and availability.

Typical applications

A 700mm (28") R-88 coupling installed in a chill water system

The Model R-88 Ring Joint Coupling is available in sizes from 200mm (8”). Sizes 350 to 650mm (14” to 26”) are now available either in a two-segment style (R-88N) or multi-segment style (R-88). The two-segment style offers a easier and faster installation. Sizes 700 to 2400mm (28”to 96"). The larger diameter couplings are comprised of 6 to 8 housing segments depending on the size and feature two bolts at each joint segment to ensure a positive connection.


RING JOINT SYSTEMS

Ring

Joint

Systems

211

Shurjoint Model R-88 Ring Joint Couplings(Page 2 of 3)


200 - 500mm (8" - 20") (R-88 & R-88N)

600 - 650mm (24" - 26")(R-88N)

Pipe SizeMax. Working PressureRings both sides fully

weldedDimensions Bolt Size Sealing

Surface L

mmInches

RingSize

Rmm

Inches

SeparationE

(max)mm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

XS (.500”)

Barpsi

STD (.375”)

Barpsi

LW (.312”)

Barpsi

Amm

Inches

Bmm

Inches

Cmm

InchesNo. mm

Inches

200 219.1 40 28 28 256 330 792

3 ⁄4 x 4 3 ⁄4 23 6 4.8 7.68 8.625 600 400 400 10.08 13.00 3.11 0.91 1

4 0.19 16.8

250 273.0 40 28 28 312 386 832

3 ⁄4 x 4 3 ⁄4 23 6 4.8 10.110 10.750 600 400 400 12.29 15.20 3.25 0.91 1

4 0.19 22.2

300 323.9 40 28 28 374 455 862

7⁄ 8 x 6 1⁄ 2 26 8 4.8 14.012 12.750 600 400 400 14.72 17.90 3.39 1.02 5

16 0.19 30.8

350 (R-88N) 355.6 40 28 24 405 493 932

7⁄ 8 x 5 1⁄ 2 26 8 6.4 17.414 14.000 600 400 350 15.93 19.40 3.65 1.02 5

16 0.25 38.3

400 (R-88N) 406.4 35 28 24 455 547 932

7⁄ 8 x 5 1⁄ 2 26 8 6.4 18.716 16.000 500 400 350 17.92 21.52 3.65 1.02 5

16 0.25 41.1

450 (R-88N) 457.2 35 28 24 517 614 1072

1 x 5 1⁄ 2 30 8 9.5 23.118 18.000 500 400 350 20.37 24.17 4.23 1.18 5

16 0.375 50.8

500(R-88N) 508.0 35 28 20 570 660 1102

1 x 5 1⁄ 2 30 9.5 9.5 38.220 20.000 500 400 300 22.46 25.99 4.35 1.18 3

8 0.375 84.0

600 (R-88N) 609.6 35 28 17 690 762 1234

7⁄ 8 x 6 1⁄ 2 30 12.7 9.5 49.724 24.000 500 400 250 27.17 30.0 4.84 1.18 1

2 0.375 109.3

650 (R-88N) 660.4 28 20 17 751 852 1704

1 x 8 7⁄ 8 50 12.7 9.5 78.726 26.000 400 300 250 29.58 32.78 6.69 2.00 1

2 0.375 173.5

R-88N is a two-segment type coupling. Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. See page 209 for Ring Joint specificationsFor information on alternative sizes, contact a GRINNELL Sales Representative.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

A

B C

A

B C

PIPE O.D.

E

RL

www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems


R-88Size: 1200mm (48") 700 - 950mm (28" - 38") 1000 - 2400mm (40" - 96")

Shurjoint Model R-88 Ring Joint CouplingsLarge Diameter(Page 3 of 3)


Pipe Size Max. Working PressureRings both sides fully welded Dimensions Bolt Size

SealingSurface L

mmInches

RingSize R

mmInches

SeparationE (max)

mmInches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

XS (.500")

Barpsi

STD (.375")

Barpsi

LW (.312")

Barpsi

Amm

Inches

Bmm

Inches

Cmm

InchesNo. mm

Inches

700 711.2 28 20 17 806 902 17112

7⁄ 8 x 4 50 12.7 12.7 101.028 28.000 400 300 250 31.75 35.50 6.73 2.00 1

2 0.50 222.2750 762.0 28 20 17 857 955 171

121 x 3 1⁄ 2 50 12.7 12.7 99.5

30 30.000 400 300 250 33.75 37.60 6.73 2.00 12 0.50 218.9

800 812.8 28 20 17 908 1003 17112

1 x 3 1⁄ 2 50 12.7 12.7 102.232 32.000 400 300 250 35.75 39.50 6.73 2.00 1

2 0.50 225.4850 863.4 24 20 14 959 1054 171

121 x 3 1⁄ 2 50 12.7 12.7 115.0

34 34.000 350 300 200 37.75 41.50 6.73 2.00 12 0.50 253.0

900 914.4 24 20 14 1010 1103 17112

1 x 3 1⁄ 2 50 12.7 12.7 111.636 36.000 350 300 200 39.75 43.50 6.73 2.00 1

2 0.50 246.0950 965.2 20 16 12 1060 1156 171

121 x 3 1⁄ 2 50 12.7 12.7 125.0

38 38.000 300 232 175 41.75 45.50 6.73 2.00 12 0.50 275.0

1000 1016.0 20 16 12 1135 1229 19816

1 x 3 1⁄ 2 60 15.9 15.9 141.040 40.000 300 232 175 44.69 48.39 7.80 2.37 5

8 0.625 310.21050 1066.8 20 16 12 1186 1280 198

161¼ x 5 60 15.9 15.9 148.6

42 42.000 300 232 175 46.70 50.39 7.80 2.37 58 0.625 326.9

1100 1117.6 20 16 12 1236 1318 19816

1¼ x 5 60 15.9 15.9 156.044 44.000 300 232 175 48.66 51.89 7.80 2.37 5

8 0.625 343.21200 1219.2 20 16 --- 1338 1420 198

161 x 3 1⁄ 2 60 15.9 15.9 211.8

48 48.000 300 232 --- 52.68 55.91 7.80 2.37 58 0.625 466.7

1300 1320.8 16 12 --- 1555 1539 19816

1¼ x 5 60 15.9 15.9 206.052 52.000 232 175 --- 61.25 60.60 7.80 2.37 5

8 0.625 453.21350 1371.6 16 12 --- 1660 1590 198

161¼ x 5 60 15.9 15.9 214.6

54 54.000 232 175 --- 63.25 62.60 7.80 2.37 58 0.625 472.1

1400 1422.4 16 12 --- 1660 1641 19816

1¼ x 5 60 15.9 15.9 222.056 56.000 232 175 --- 65.38 64.60 7.80 2.37 5

8 0.625 488.21500 1524.0 16 12 --- 1762 1742 198

161¼ x 5 60 15.9 15.9 244.2

60 60.000 232 175 --- 69.38 68.60 7.80 2.37 58 0.625 537.2

1650 1676.4 12 8.6 --- 1932 1925 21616

1 1⁄ 2 x 5 60 19.1 19.1 278.466 66.000 175 125 --- 76.00 75.79 8.00 2.37 3

4 0.75 612.51700 1727.2 12 8.6 --- 1994 1976 216

161 1⁄ 2 x 5 60 19.1 19.1 357.0

68 68.000 175 125 --- 78.50 77.79 8.00 2.37 34 0.75 785.4

1800 1828.8 10 8.6 --- 2095 2078 21616

1 1⁄ 2 x 5 60 19.1 19.1 335.372 72.000 150 125 --- 82.50 81.81 8.00 2.37 3

4 0.75 737.72100 2133.6 8.6 7 --- 2406 2383 216

161 1⁄ 2 x 5 60 19.1 19.1 354.7

84 84.000 125 100 --- 94.75 93.81 8.00 2.37 34 0.75 780.3

2400 2438.4 8.6 7 --- 2711 2662 21616

1 1⁄ 2 x 5 60 19.1 19.1 374.296 96.000 125 100 --- 106.75 105.79 8.00 2.37 3

4 0.75 823.2

For information on alternative sizes, contact a GRINNELL Sales Representative.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. See page 209 for Ring Joint specificationsFor instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

A

B C

A

B C

-88

PIPE O.D.

E

RL


RING JOINT SYSTEMS

Ring

Joint

Systems

213

Shurjoint Model RH-1000 1000 PSI Ring Joint Couplings


The Shurjoint Model RH-1000 coupling is a high pressure ring joint coupling for use with Sch. 40, Sch. 80 and heavier wall carbon steel pipe.

The coupling is comprised of two ductile iron heavy-wall housings, rubber gasket (EPDM or Nitrile) and two heat-treated track bolts and nuts which provide a fully restrained joint and a maximum working pressure of 70 Bar (1,000 psi) depending on the pipe used.

Two steel weld rings are factory supplied with the coupling.



Barpsi

Dimensions Bolt / Nut Deflection

( ° )

Pipe-end Preparation Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesNo. Size

in

Rmm

Inches

Lmm

Inches

E (max)mm

Inches200 219.1 70 282 372 98

21" x 140

0° – 18'12 25 3.2 18.1

8 8.625 1000 11.10 14.65 3.86 0.47 1 0.13 39.8

250 273.0 70 340 430 1082

1" x 1650° – 38'

12 25 3.2 26.010 10.750 1000 13.32 16.93 4.25 0.47 1 0.13 57.2

300 323.9 70 415 510 1062

1" x 1650° – 32'

12 25 3.2 33.012 12.750 1000 16.33 20.07 4.17 0.47 1 0.13 72.6

*Bolt & nuts are UNC threaded.For information on alternative sizes, contact a GRINNELL Sales Representative.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint

Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com. See page 209 for Ring Joint specificationsFor instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Nom. Rating



Class 400

70 Bar @38°C1000 psi @100°F





pressure.

A

B C

PIPE O.D.

E

RL

www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems



The Shurjoint Model RX-3000 coupling is a high pressure ring joint coupling for use with Sch. 80, 120 and heavier wall carbon steel pipe.

The coupling is comprised of two ductile iron heavy-wall housings, rubber gasket (EPDM or Nitrile) and two or four heat-treated track bolts and nuts which provide a fully restrained joint and a maximum working pressure up to 210 Bar (3,000 psi) depending on the pipe used.

Two steel weld rings are factory supplied with the coupling.

Pipe Size Max.WorkingPressure

Barpsi

Dimensions Bolt / Nut* Pipe-end Preparation Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches

Amm

Inches

Bmm

Inches

Cmm

InchesQty. Size

in

Rmm

Inches

Lmm

Inches

Emm

Inches200 219.1 210 300 394 148

21 1⁄ 8 x 130 12.0 - 12.7 31 3 35.87

8 8.625 3000 11.81 15.51 5.83 0.472 - 0.500 1.22 18 78.92

250 273.0 210 380 481 1524

1¼ x 165 15.9 - 16.0 31 3 52.7810 10.748 3000 14.96 18.93 5.98 0.625 - 0.629 1.22 1

8 116.36

300 323.9 210 470 572 1734

1 1⁄ 2" x 160 15.9 - 16.0 31 3 96.2412 12.752 3000 18.5 22.48 6.81 0.625 - 0.629 1.22 1

8 212.27

*Bolt & nuts are UNC threaded. @ 12.7mm ( 1⁄2" ) and 15.9mm ( 5⁄8" ) steel rings are also available upon request.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


Shurjoint Model RX-3000 3000 PSI Ring Joint CouplingsShurjoint Tech Data Sheet: O-05

Nom. Rating



Class 1500

210 Bar @38°C3000 psi @100°F



*Working pressure is based on API 5L X65 line pipe.*Proof test pressure: 1.5 times the working pressure, non-shock


pressure.

A

B C

PIPE O.D.

E

RL


RING JOINT SYSTEMS

Ring

Joint

Systems

215


The Shurjoint Model RX-3770 Ring Joint Coupling is designed to provide a fully restrained joint for use with extra-strong carbon steel pipe including API 5L Grade X65 line pipe.

The coupling is comprised of two ductile iron heavy-wall housing segments, rubber gasket (EPDM) and four heat-treated track bolts and nuts. Two steel weld rings are factory supplied with a coupling.

NominalSizemm

Inches

PipeODmm

Inches

Max. WorkingPressure

Barpsi

Dimensions Bolt / Nut* Pipe-end Preparation Approx. Weight

kgLbs.

Amm

Inches

Bmm

Inches

Cmm

InchesNo. Size

in

Rmm

Inches

Lmm

Inches

Emm

Inches150 168.3 260 260 321 149

4 7⁄ 8" x 165 12 31 5 27.7

6 6.625 3770 10.24 12.64 5.87 0.472 1.22 0.20 61.2

200 219.1 260 329 414 1754

1¼" x 165 16 38 5 49.98 8.625 3770 12.95 16.30 6.89 0.625 1.50 0.20 110.0

250 273.0 260 404 505 1884

1 1⁄ 2" x 175 19 38 5 79.210 10.750 3770 15.90 19.88 7.40 0.750 1.50 0.20 174.5

300 323.9 260 482 587 2194

1 1⁄ 2" x 175 22 38 6 112.312 12.750 3770 19.0 23.10 8.63 0.875 1.50 0.24 247.1

*Bolt & nuts are UNC threaded.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


Shurjoint Model RX-37703770 PSI Ring Joint Couplings


Nom. Rating Working Pressure Max. Service

Temperature

Class 2000

260 Bar @38°C3770 psi @100°F



*Working pressure is based on API 5L X65 line pipe.*Proof test pressure: 1.5 times the working pressure, non-shock


pressure.

A

B C

R

L

E

PIPE O.D.

www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems


Shurjoint Figure RJ-10 90° Ring Joint ElbowsShurjoint Tech Data Sheet: O-02

Pipe SizeC - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches200 219.1 197 13.08 8.625 7.75 28.6

250 273.0 229 25.010 10.750 9.00 55.0300 323.9 254 35.012 12.750 10.00 77.0350 355.6 280 37.014 14.000 11.00 81.4

400 406.4 305 45.016 16.000 12.00 99.0

450 457.2 686 95.018 18.000 27.0 209.0500 508.0 762 138.020 20.000 30.0 203.6600 609.6 914 220.024 24.000 36.0 485.0650 660.4 991 237.026 26.000 39.00 521.0700 711.2 1067 275.028 28.000 42.00 605.0750 76.20 1143 316.030 30.000 45.00 695.0800 812.8 1219 360.032 32.000 48.00 792.0850 863.4 1295 407.034 34.000 51.00 895.0900 914.4 1372 457.036 36.000 54.00 1005.0

1000 1016.0 1524 564.040 40.000 60.00 1241.0

1050 1066.8 1600 622.042 42.000 63.00 1368.0

1100 1117.6 1676 683.044 44.000 66.00 1503.0

1200 1219.2 1829 814.048 48.000 72.00 1790.0

sizes are to manufacturer's standard.Refer to the Shurjoint technical data sheet for complete technical

information and installation instructions. More information about Shurjoint Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.

See left column for Ring Joint specificationsFor information on alternative sizes, contact a GRINNELL Sales

Representative.For instructions on part numbers, ordering information, and


C to E

C to E

RING JOINT FITTINGSShurjoint offers a full range of ring joint fittings for use with Model R-88 ring joint couplings.

8” - 16”) Models RJ-10, RJ-11 & RJ-60 and RJ-20 are available in cast ductile iron to ASTM A 536 Gr. 65-45-12.

weight pipe, ASTM A 53 Gr. B or equivalent, or fabricated from wrought carbon steel of the equivalent properties.

request. contact Shurjoint for details.

FITTING MATERIAL SPECIFICATIONSFitting body:

ASTM A 395, Gr. 65-45-15. min. tensile strength 4481 Bar (65,000 psi).

(0.375") wall pipe of ASTM A 234 Gr. WPB

Surface Finish:

red.

(Option)

Rings:

General Notes:

ratings of installed coupling.

working pressure listed (AWWA C606 5.2.3).

depressurized and drained before attempting disassembly and or removal of any components.

scalding or hot water services or other high temperature applications. Visit Shurjoint website for full warranty.

designs and or standard equipment without notice and without incurring any obligation.



RING JOINT SYSTEMS

Ring

Joint

Systems

217

Pipe SizeC - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches200 219.1 197 21.08 8.625 7.75 46.2

250 273.0 229 33.010 10.750 9.00 72.6300 323.9 254 47.012 12.750 10.00 103.4

350 355.6 280 54.014 14.000 11.00 118.8

400 406.4 305 70.016 16.000 12.00 154.0

450 457.2 394 122.018 18.000 15.50 268.0500 508.0 438 153.020 20.000 17.25 337.0600 609.6 508 212.024 24.000 20.00 466.0650 660.4 572 348.026 26.000 22.50 766.0700 711.2 597 392.028 28.000 23.50 862.0750 76.20 635 451.030 30.000 25.00 992.0800 812.8 673 516.032 32.000 26.50 1135.0850 863.4 711 584.034 34.000 28.00 1285.0900 914.4 762 657.036 36.000 30.00 1445.0

1000 1016.0 838 814.040 40.000 33.00 1790.0

1050 1066.8 889 837.042 42.000 35.00 1841.0

1100 1117.6 914 943.044 44.000 36.00 2075.0

1200 1219.2 1016 1131.048 48.000 40.00 2488.0

18" ) and larger sizes and E-E of R-60 650mm (26" ) and larger sizes conform to ANSI B16.9. All other sizes are to manufacturer's standard.


See page 216 for Ring Joint specificationsFor information on alternative sizes, contact a GRINNELL Sales



Shurjoint Figure RJ-20 Ring Joint Tee


C to E

C to E

Pipe SizeC - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches200 219.1 108 9.58 8.625 4.25 20.9

250 273.0 121 18.010 10.750 4.75 39.6300 323.9 133 23.012 12.750 5.25 50.6

350 355.6 152 24.014 14.000 6.00 52.8

400 406.4 184 46.016 16.000 7.25 101.2

450 457.2 286 48.018 18.000 11.25 105.6500 508.0 318 50.020 20.000 12.50 110.0600 609.6 381 80.024 24.000 15.00 176.0650 660.4 406 119.026 26.000 16.00 262.0700 711.2 438 138.028 28.000 17.25 304.0750 76.20 480 158.030 30.000 18.50 348.0800 812.8 502 180.032 32.000 19.75 396.0850 863.4 533 204.034 34.000 21.00 449.0900 914.4 565 229.036 36.000 22.25 504.0

1000 1016.0 632 282.040 40.000 24.88 620.0

1050 1066.8 660 311.042 42.000 26.00 684.0

1100 1117.6 696 342.044 44.000 27.39 752.0

1200 1219.2 759 407.048 48.000 29.88 895.0

18" ) and larger sizes conform to ANSI B16.9. All other sizes are to manufacturer's standard.





Shurjoint Figure RJ-11 45° Ring Joint Elbows


C to E

www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems


Shurjoint Figure RJ-21 Reducing TeesShurjoint Tech Data Sheet: O-02

Pipe SizeC - Emm

Inches

C - Bmm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches350 x 300 355.6 x 323.9 279 270 66.014 x 12 14.000 x 12.750 11.00 10.62 145.0

400 x 300 406.4 x 323.9 305 295 78.016 x 12 16.000 x 12.750 12.00 11.62 172.0

400 x 350 406.4 x 355.6 305 305 80.016 x 14 16.000 x 14.000 12.00 12.00 176.0

450 x 300 457.2 x 323.9 343 321 112.018 x 12 18.000 x 12.750 13.50 12.62 246.0

450 x 350 457.2 x 355.6 343 330 115.018 x 14 18.000 x 14.000 13.50 13.00 253.0

450 x 400 457.2 x 406.4 343 330 120.018 x 16 18.000 x 16.000 13.50 13.00 264.0

500 x 300 508.0 x 323.9 381 346 135.020 x 12 20.000 x 12.750 15.00 13.62 297.0

500 x 350 508.0 x 355.6 381 356 138.020 x 14 20.000 x 14.000 15.00 14.00 304.0

500 x 400 508.0 x 406.4 381 356 144.020 x 16 20.000 x 16.000 15.00 14.00 317.0

500 x 450 508.0 x 457.2 381 368 149.020 x 18 20.000 x 18.000 15.00 14.50 328.0

600 x 300 609.6 x 323.9 432 397 180.024 x 12 24.000 x 12.750 17.00 15.62 396.0

600 x 350 609.6 x 355.6 432 406 185.024 x 14 24.000 x 14.000 17.00 16.00 407.0

600 x 400 609.6 x 406.4 432 406 190.024 x 16 24.000 x 16.000 17.00 16.00 418.0

600 x 450 609.6 x 457.2 432 419 197.024 x 18 24.000 x 18.000 17.00 16.50 433.0

600 x 500 609.6 x 508.0 432 432 202.024 x 20 24.000 x 20.000 17.00 17.00 444.0

C-E: Mfr's standard. E-E marked (*): Mfr's standard (made of ductile iron). All other E-E: ANSI B16.9.Refer to the Shurjoint technical data sheet for complete technical information and installation instructions. More information about Shurjoint


C to E

C to B


RING JOINT SYSTEMS

Ring

Joint

Systems

219

Pipe SizeE - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches350 x 300 355.6 x 323.9 203* 23.014 x 12 14.000 x 12.750 8.00 51.0

400 x 300 406.4 x 323.9 229* 29.016 x12 16.000 x 12.750 9.00 64.0

400 x 350 406.4 x 355.6 229* 29.016 x 14 16.000 x 14.000 9.00 64.0

450 x 300 457.2 x 323.9 241* 33.018 x 12 18.000 x 12.750 9.50 72.6

450 x 350 457.2 x 355.6 381 36.018 x 14 18.000 x 14.000 15.00 79.0

450 x 400 457.2 x 406.4 381 36.018 x 16 18.000 x 16.000 15.00 79.0

500 x 300 508.0 x 323.9 254* 43.020 x 12 20.000 x 12.750 10.00 95.0

500 x 350 508.0 x 355.6 508 45.020 x 14 20.000 x 14.000 20.0 99.0

500 x 400 508.0 x 406.4 508 46.020 x 16 20.000 x 16.000 20.0 101.0

500 x 450 508.0 x 457.2 508 58.020 x 18 20.000 x 18.000 20.00 128.0

600 x 300 609.6 x 323.9 305* 70.024 x 12 24.000 x 12.750 12.00 154.0

600 x 350 609.6 x 355.6 508 70.024 x 14 24.000 x 14.000 20.00 154.0

600 x 400 609.6 x 406.4 305* 70.024 x 16 24.000 x 16.000 12.00 154.0

600 x 450 609.6 x 457.2 508 70.024 x 18 24.000 x 18.000 20.00 154.0

600 x 500 609.6 x 508.0 305* 71.024 x 20 24.000 x 20.000 12.00 156.0

C-E: Mfr's standard. E-E marked (*): Mfr's standard (made of ductile iron). All other E-E: ANSI B16.9.





Shurjoint Figure RJ-50 Concentric Reducer


Shurjoint Figure RJ-51 Eccentric Reducer


Pipe SizeE - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches350 x 300 355.6 x 323.9 330 23.014 x 12 14.000 x 12.750 13.00 51.0

400 x 300 406.4 x 323.9 229* 29.016 x 12 16.000 x 12.750 9.00 64.0

400 x 350 406.4 x 355.6 229* 29.016 x 14 16.000 x 14.000 9.00 64.0

450 x 300 457.2 x 323.9 381 35.018 x 12 18.000 x 12.750 15.00 78.0

450 x 350 457.2 x 355.6 381 36.018 x 14 18.000 x 14.000 15.00 79.0

450 x 400 457.2 x 406.4 381 36.018 x 16 18.000 x 16.000 15.00 79.0

500 x 300 508.0 x 323.9 508 43.020 x 12 20.000 x 12.750 20.00 95.0

500 x 350 508.0 x 355.6 508 45.020 x 14 20.000 x 14.000 20.0 99.0

500 x 400 508.0 x 406.4 508 46.020 x 16 20.000 x 16.000 20.0 101.0

500 x 450 508.0 x 457.2 508 58.020 x 18 20.000 x 18.000 20.00 128.0

600 x 300 609.6 x 323.9 508 70.024 x 12 24.000 x 12.750 20.00 154.0

600 x 350 609.6 x 355.6 508 70.024 x 14 24.000 x 14.000 20.00 154.0

600 x 400 609.6 x 406.4 508 70.024 x 16 24.000 x 16.000 20.00 154.0

600 x 450 609.6 x 457.2 508 70.024 x 18 24.000 x 18.000 20.00 154.0

600 x 500 609.6 x 508.0 508 71.024 x 20 24.000 x 20.000 20.00 156.0

C-E: Mfr's standard. E-E marked (*): Mfr's standard (made of ductile iron). All other E-E: ANSI B16.9.





E to E E to E

www.grinnell.com

RING JOINT SYSTEMS

Ring

Joint

Systems


Pipe SizeE - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches200 219.1 152 20.48 8.625 6 44.9

250 273.0 203 30.510 10.750 8 67.1

300 323.9 203 44.612 12.750 8 98.1

350 355.6 203 54.014 14.000 8.00 118.8

400 406.4 203 66.816 16.000 8.00 147.0

450 457.2 203 65.018 18.000 8.00 143.0

500 508.0 203 77.020 20.000 8.00 169.4

600 609.6 203 130.424 24.000 8.00 286.9

1200 1219.2 203 364.048 48.000 8.00 800.8

E-E: Mfr's standard.Refer to the Shurjoint technical data sheet for complete technical

information and installation instructions. More information about Shurjoint Piping Products can be found on page 14 in the General Data section of this book or on www.shurjoint.com.

See Flange Drilling Specifications on page 267.See page 216 for Ring Joint specificationsFor information on alternative sizes, contact a GRINNELL Sales



Shurjoint Figure RJ-70 Flange AdapterShurjoint Tech Data Sheet: O-02

E to E

Shurjoint Figure RJ-60 Ring Joint CapShurjoint Tech Data Sheet: O-02

Pipe SizeE - Emm

Inches

Approx. Weight

kgLbs.

Nominal mm

Inches

O.D.mm

Inches200 219.1 76 5.58 8.625 3.00 12.1

250 273.0 76 6.010 10.750 3.00 13.2300 323.9 76 8.012 12.750 3.00 17.6

350 355.6 102 12.014 14.000 4.00 26.4

400 406.4 102 15.016 16.000 4.00 33.0

450 457.2 127 21.018 18.000 5.00 46.2500 508.0 152 26.020 20.000 6.00 57.2600 609.6 152 35.024 24.000 6.00 77.0650 660.4 267 50.026 26.000 10.50 110.0700 711.2 267 56.028 28.000 10.50 123.0750 76.20 267 62.030 30.000 10.50 136.0800 812.8 267 113.032 32.000 10.50 248.6850 863.4 267 75.034 34.000 10.50 165.0900 914.4 267 152.036 36.000 10.50 334.4

1000 1016.0 305 102.040 40.000 12.00 224.0

1050 1066.8 305 110.042 42.000 12.00 242.0

1100 1117.6 343 126.044 44.000 13.50 277.0

1200 1219.2 343 143.048 48.000 13.50 315.0

and larger sizes conform to ANSI B16.9. All other sizes are to manufacturer's standard.





E to E

PREPARATIONEQUIPMENT

221

www.grinnell.com

PREPARATION EQUIPMENT

Preparation

Equipment


Preparation Equipment Table of Contents


Figure Groover 01Portable Groover

Pages – 223

Figure Groover 02Automatic Groover

Pages – 223

Figure Groover 10APortable Groover

Pages – 223

Figure STANDPipestand

Page – 223

Figure RJ624Pipestand

Page – 223

Figure HCTOOLHole Cutting Tool

Page – 224

Hole Cutting Tools

Page – 224

Pipe TapePage – 225

Figure PUNCHHole PunchPage – 225

Figure GAUGEGroove Gauge

Page – 226

BT

COD

A

Roll Grooving SpecificationsPages 227– 228

TB

COD

A

Cut Grooving Specifications

Pages – 229 - 230

BT

COD

A

Large Diameter Roll Groove

SpecificationsPage – 231

BT

COD

A

End Protection (EP) Cut Groove

SpecificationsPage – 232



Preparation

Equipment

223

PartNumber

Nominal SizemmIn.

PowerSupply* Description

Approx. Weight

kgLbs

GROOVER 0142.4mm thru 457.2mm

380VAC 50Hz Portable Groover with Pipestand207

1 14 thru 18 456.4

GROOVER 0242.4mm thru 457.2mm

380VAC 50Hz Automatic Groover with Pipestand297

1 14 thru 18 654.8

GROOVER 10A33.7mm thru 219.1mm


1 thru 8 235.9

GROO10A-UK33.7mm thru 219.1mm


1 thru 8 235.9

*Note: Other voltages on request.For instructions on part numbers, ordering information, and availability, refer to page 15 or contact a GRINNELL Sales Representative.

Part Number Description

Size Range

mmIn.

Approx. Weight

kgLbs

STAND Pipestand for pipes 33.7mm thru 219.1mm 15

1" thru 8" 33.1

RJ-624 Pipestand for pipes 168.3mm thru 609.6mm 40

6" thru 24" 88.2


Pipe Preparation Tools

Figure STAND Figure RJ-624

Figure GROOVER 01 Figure GROOVER 02 Figure GROOVER 10A

Pipe Stands

www.grinnell.com


Preparation

Equipment


Figure HCTOOL Hole Cutting Tool

Hole Cutting Tool Spare Parts

Part Number

PipeSizemmIn.

Max. Hole ØSupply

mmIn.

DescriptionApproxWeight

Kg

HCTOOL21.0-273.0 125

Hole cutting Tool8.0

12-10 5 17.6

Note: The HCT Hole Cutting Tool is a great help when drilling holes in pipe. Almost any standard hole saw machine [i.e. electric drill] can be mounted on the HCT. With the HCT the hole saw can be fixed, secured and used as a leveling tool to ensure accurate hole alignment. For pipes of 12mm thru 250mm ( 1⁄2"thru 12" ). With the optional base and beam adapter, the support can also be attached to standard steel beams.

Contact a GRINNELL Sales Representative for missing part numbers and ordering information.

Part Number

DmmIn.

Use withHole Drill

Use withDrive Plate

HOLESAW2222.2

HOLESAWCP –0.87

HOLESAW2423.8

HOLESAWCP –0.94

HOLESAW2525.4

HOLESAWCP –1.00

HOLESAW3534.9

HOLESAWCP5 –1.37

HOLESAW3838.1

HOLESAWCP5 –1.50

HOLESAW4444.5

HOLESAWCP5 –1.75

HOLESAW5050.8

HOLESAWCP5 –2.00

HOLESAW6363.5

HOLESAWCP5 –2.50

HOLESAW7069.9

HOLESAWCP5 –2.75

HOLESAW8988.9

HOLESAWCP5 HOLESAWDP3.50

HOLESAW114114.3

HOLESAWCP5 HOLESAWDP4.50


Figure HCTOOL (Drill not included)

Figure HOLESAW (Available sizes show in table)

Figure HOLESAWCP (For dia. 14.3mm

thru 30.2mm) (0.56" thru 1.19")

Figure HOLESAWDP (Drive plate for dia. 76.2mm

thru 152.4mm) (3.00" thru 6.00")

Figure HOLESAWCD (Spare drill for

HOLESAWCP & HOLESAWCP5)

Figure HOLESAWCP5 (For dia. 31.8mm thru 152.4mm)

(1.25" thru 6.00")

D



Preparation

Equipment

225

Figure PUNCHCentre Punch

GRINNELL Groove Measurement Tapes

This dimensional measurement tape has been developed to check the groove diameter (C-size) of grooved pipe from 33.7mm up to 609.6mm (1” up to 24”).

The loop extending from the metal housing consist of a clear-view plastic window with an indicator line and a metal measuring tape. Through the window one can see the various markings (groove tolerance areas) on the tape.

First, verify which size pipe is to be checked. As shown on the drawing, the metal tape will show the diameter of a particular steel pipe size. Slide the loop over the grooved end of the pipe and place the tape in the groove.

Please note: Check whether the tape is placed in the groove over the entire circumference of the pipe!

Pull the tape tightly on the pipe. Through the clear view window one should see the indicator line and a small ‘block’ showing the tolerance area for the groove. The indicator line in the window must fall within the dark coloured block or groove tolerance area.

If the indicator line is not within the groove tolerance area, first check if the tape is pulled back tightly, and whether the tape is correctly placed in the groove. If the tape is placed properly, this particular groove is not correct. Make sure that the settings on the GRINNELL grooving tool are corrected to obtain the correct groove dimensions.

Please note:

This tape is not a calibrated tool and is to be used for reference only. To ensure accuracy, always check grooved end pipe with calibrated gauges or calibers.

For Roll Groove Standard Specifications for Steel Pipe and Other IPS Pipe, refer to Data Sheet G710.

Part Number

Pipe Size mmIn.

Description Hole Drill

Use with Drive Plate

GRINTAPE33.7 – 323.9

Pipe Measuring Tape 0.1001 – 12

ZKLM02433.7 – 609.6

Pipe Measuring Tape 0.1001 – 24


Part Number

PUNCH


www.grinnell.com


Preparation

Equipment


GRINNELL Gauges

This dimensional gauge is developed to check the A dimension (gasket seat) and B dimension (groove width) of grooved pipe.

A Dimension - Gasket seatSelect the proper size of pipe on the gauge. Place the gauge with the DIM A OK side on the grooved end of the pipe as shown on the drawing. If the gauge fits the groove should be acceptable. If the DIM A NOT OK side fits the grooved end, this groove is not made in accordance with GRINNELL specifications.

B Dimension - Groove widthSelect the proper size of the pipe on the gauge. Place the gauge with the DIM B OK side in the groove of the pipe as shown on the drawing. If the gauge fits, the groove should be acceptable. If the DIM B NOT OK side fits the groove, this groove is not made in accordance with GRINNELL specifications.

Please note: This gauge is not a calibrated tool and is to be used for reference only. To ensure accuracy, always check grooved end pipe with calibrated gauges or calibers.

Part Number

Pipe Size mmIn.

Description Hole Drill

Use with Drive Plate

GAUGE33.7 – 323.9

Gauge 0.2501 – 12


Dimension A

8-12 1-6

8-12 1-6

A-Dim OK

A-DimNot OK

1-1.5 2-6 8-12

1-1.5 2-6 8-12

B-Dim OK

B-Dim Not OKDimension B



Preparation

Equipment

227

GRINNELL Roll Grooves conform to AWWA C-606 specification.

BT

COD

D

A

Roll Groove Standard Specification for Steel & Other IPS Pipe

(Page 1 of 2)


NominalPipeSizemm

Inches

Pipe O.D.mm

Inches

A±0,76mm±0.030"

mmInches

B±0,76mm±0.030"

mmInches

CGroove Diameter

mmInches

DGroove Depth

(ref. only)mm

Inches

TMinimum

Wallmm

Inches

Maximum Allow Flare Diameter

mmInchesO.D.

Tolerance

+ - Actual Tol. +0.000

32 42.4 0.41 0.41 15.88 7.14 38.99 -0.38 1.60 1.65 44.961 1

4 1.660 0.016 0.016 0.625 0.281 1.535 -0.015 0.062 0.065 1.77

40 48.3 0.48 0.48 15.88 7.14 45.09 -0.38 1.60 1.65 51.051 1

2 1.900 0.019 0.019 0.625 0.281 1.775 -0.015 0.062 0.065 2.01

50 60.3 0.61 0.61 15.88 8.74 57.15 -0.38 1.60 1.65 62.992 2.375 0.024 0.024 0.625 0.344 2.250 -0.015 0.062 0.065 2.48

65 73.0 0.74 0.74 15.88 8.74 69.09 -0.46 1.98 2.11 75.692 1

2 2.875 0.029 0.029 0.625 0.344 2.720 -0.018 0.078 0.083 2.98

65 76.1 0.76 0.76 15.88 8.74 72.26 -0.46 1.93 2.11 78.7476.1mm 3.000 0.030 0.030 0.625 0.344 2.845 -0.018 0.076 0.083 3.10

80 88.9 0.89 0.79 15.88 8.74 84.94 -0.46 1.98 2.11 91.443 3.500 0.035 0.031 0.625 0.344 3.344 -0.018 0.078 0.083 3.60

100 108.0 1.09 0.79 15.88 8.74 103.73 -0.51 2.11 2.11 110.49108.0mm 4.252 0.043 0.031 0.625 0.344 4.084 -0.020 0.083 0.083 4.35

100 114.3 1.14 0.79 15.88 8.74 110.08 -0.51 2.11 2.11 116.844 4.500 0.045 0.031 0.625 0.344 4.334 -0.020 0.083 0.083 4.60

125 133.0 1.35 0.79 15.88 8.74 129.13 -0.56 2.11 2.77 135.89133.0mm 5.236 0.053 0.031 0.625 0.344 5.084 -0.022 0.083 0.109 5.35

125 139.7 1.42 0.79 15.88 8.74 135.48 -0.56 2.11 2.77 142.24139.7mm 5.500 0.056 0.031 0.625 0.344 5.334 -0.022 0.083 0.109 5.60

125 141.3 1.42 0.79 15.88 8.74 137.03 -0.56 2.13 2.77 143.765 5.563 0.056 0.031 0.625 0.344 5.395 -0.022 0.084 0.109 5.66

150 159.0 1.60 0.79 15.88 8.74 154.53 -0.76 2.11 2.77 161.29159.0mm 6.260 0.063 0.031 0.625 0.344 6.084 -0.030 0.083 0.109 6.35

(1) The maximum allowable tolerances for IPS Pipe from square cut ends is: 0.76mm (0.030") for sizes 32mm – 80mm (1¼" thru 3") 1.14mm (0.045") for sizes 100mm – 150mm (4" – 6") 1.52mm (0.060") for sizes 200mm (8") and above.

(2) Gasket Seating Surface “A” must be free from score marks, ridges, indentations, projections, loose paint, scale, dirt chips, grease, rust, etc. that would prevent a positive seal.

(3) Groove Diameter “C” must be of uniform depth around the circumference of the pipe.

(4) Groove Depth “D” is a reference dimension only. The Groove Diameter “C” must be maintained.

(5) Minimum Wall Thickness “T” is the minimum wall thickness that should be roll grooved.

(6) Maximum allowable pipe end flare diameter is measured at the pipe end diameter.

www.grinnell.com


Preparation

Equipment


NominalPipeSizemm

Inches

Pipe O.D.mm

Inches

A±0,76mm±0.030"

mmInches

B±0,76mm±0.030"

mmInches

CGroove Diameter

mmInches

DGroove Depth

(ref. only)mm

Inches

TMinimum

Wallmm

Inches

Maximum Allow Flare Diameter

mmInchesO.D.

Tolerance

+ - Actual Tol. +0.000

150 165.1 1.60 0.79 15.88 8.74 160.78 -0.56 2.16 2.77 167.64165.1mm 6.500 0.063 0.031 0.625 0.344 6.330 -0.022 0.085 0.109 6.60

150 168.3 1.60 0.79 15.88 8.74 163.96 -0.56 2.16 2.77 170.946 6.625 0.063 0.031 0.625 0.344 6.455 -0.022 0.085 0.109 6.73

200 219.1 1.60 0.79 19.05 11.91 214.40 -0.64 2.34 2.77 223.528 8.625 0.063 0.031 0.750 0.469 8.441 -0.025 0.092 0.109 8.80

250 273.0 1.60 0.79 19.05 11.91 268.27 -0.69 2.39 3.40 277.3710 10.750 0.063 0.031 0.750 0.469 10.562 -0.027 0.094 0.134 10.92

300 323.9 1.60 0.79 19.05 11.91 318.19 -0.76 2.77 3.96 328.1712 12.750 0.063 0.031 0.750 0.469 12.531 -0.030 0.109 0.156 12.92

350 355.6 1.60 0.79 23.83 11.91 350.04 -0.76 2.77 3.96 358.1414 14.000 0.063 0.031 0.938 0.469 13.781 -0.030 0.109 0.156 14.10

400 406.4 1.60 0.79 23.83 11.91 400.84 -0.76 2.77 4.19 408.9416 16.000 0.063 0.031 0.938 0.469 157.81 -0.030 0.109 0.165 16.10

450 457.2 1.60 0.79 25.40 11.91 451.64 -0.76 2.77 4.19 461.2618 18.000 0.063 0.031 1.000 0.469 17.781 -0.030 0.109 0.165 18.16

500 508.0 1.60 0.79 25.40 11.91 502.44 -0.76 2.77 4.78 512.0620 20.000 0.063 0.031 1.000 0.469 19.781 -0.030 0.109 0.188 20.16

600 609.6 1.60 0.79 25.40 12.70 600.86 -0.76 4.37 5.54 614.6824 24.000 0.063 0.031 1.000 0.500 23.656 -0.030 0.172 0.218 24.20

BT

COD

D

A

Roll Groove Standard Specification for Steel & Other IPS Pipe(Page 2 of 2)






(5) Minimum Wall Thickness “T” is the minimum wall thickness that should be roll grooved.

(6) Maximum allowable pipe end flare diameter is measured at the pipe end diameter.



Preparation

Equipment

229

Cut Groove Standard Specification for Steel & Other IPS Pipe

(Page 1 of 2)


TB

D

COD

A

NominalPipeSizemm

Inches

Pipe O.D.mm

Inches

A±0,76mm±0.030"

mmInches

B±0,76mm±0.030"

mmInches

CGroove Diameter

mmInches

D Groove Depth

(ref. only)mm

Inches

T Minimum

Wallmm

InchesO.D.Tolerance

+ - Actual Tol. +0.00032 42.4 0.41 0.41 15.88 7.95 38.99 -0.38 1.60 3.56

1 14 1.660 0.016 0.016 0.625 0.313 1.535 -0.015 0.062 0.140

40 48.3 0.48 0.48 15.88 7.95 45.09 -0.38 1.60 3.681 1

2 1.900 0.019 0.019 0.625 0.313 1.775 -0.015 0.062 0.145

50 60.3 0.61 0.61 15.88 7.95 57.15 -0.38 1.60 3.912 2.375 0.024 0.024 0.625 0.313 2.250 -0.015 0.062 0.154

65 73.0 0.74 0.74 15.88 7.95 69.09 -0.46 1.98 4.782 1

2 2.875 0.029 0.029 0.625 0.313 2.720 -0.018 0.078 0.188

65 76.1 0.76 0.76 15.88 7.95 72.26 -0.46 1.93 4.7876.1mm 3.000 0.030 0.030 0.625 0.313 2.845 -0.018 0.076 0.188

80 88.9 0.89 0.79 15.88 7.95 84.94 -0.46 1.98 4.783 3.500 0.035 0.031 0.625 0.313 3.344 -0.018 0.078 0.188

100 108.0 1.07 0.79 15.88 9.53 103.73 -0.51 2.11 5.16108.0mm 4.252 0.042 0.031 0.625 0.375 4.084 -0.020 0.083 0.203

100 114.3 1.14 0.79 15.88 9.53 110.08 -0.51 2.11 5.164 4.500 0.045 0.031 0.625 0.375 4.334 -0.020 0.083 0.203

125 133.0 1.35 0.79 15.88 9.53 129.13 -0.51 2.11 5.16133.0mm 5.236 0.052 0.031 0.625 0.375 5.084 -0.020 0.083 0.203

125 139.7 1.42 0.79 15.88 9.53 135.48 -0.51 2.11 5.16139.7mm 5.500 0.056 0.031 0.625 0.375 5.334 -0.020 0.083 0.203





(5) Minimum Wall Thickness “T” is the minimum wall thickness that should be cut grooved.

www.grinnell.com


Preparation

Equipment


NominalPipeSizemm

Inches

Pipe O.D.mm

Inches

A±0,76mm±0.030"

mmInches

B±0,76mm±0.030"

mmInches

CGroove Diameter

mmInches

D Groove Depth

(ref. only)mm

Inches

T Minimum

Wallmm

InchesO.D.Tolerance

+ - Actual Tol. +0.000125 141.3 1.42 0.79 15.88 9.53 137.03 -0.56 2.13 5.165 5.563 0.056 0.031 0.625 0.375 5.395 -0.022 0.084 0.203

150 159.0 1.60 0.79 15.88 9.53 154.53 -0.56 2.11 5.56159.0mm 6.260 0.063 0.031 0.625 0.375 6.084 -0.022 0.083 0.219

150 165.1 1.60 0.79 15.88 9.53 160.78 -0.56 2.16 5.56165.1mm 6.500 0.063 0.031 0.625 0.375 6.330 -0.022 0.085 0.219

150 168.3 1.60 0.79 15.88 9.53 163.96 -0.56 2.16 5.566 6.625 0.063 0.031 0.625 0.375 6.455 -0.022 0.085 0.219

200 219.1 1.60 0.79 19.05 11.13 214.40 -0.64 2.34 6.058 8.625 0.063 0.031 0.750 0.438 8.441 -0.025 0.092 0.238

250 273.0 1.60 0.79 19.05 12.70 268.27 -0.69 2.39 6.3510 10.750 0.063 0.031 0.750 0.500 10.562 -0.027 0.094 0.250

300 323.9 1.60 0.79 19.05 12.70 318.19 -0.76 2.77 7.0912 12.750 0.063 0.031 0.750 0.500 12.531 -0.030 0.109 0.279

350 355.6 1.60 0.79 23.83 12.70 350.04 -0.76 2.77 7.1414 14.000 0.063 0.031 0.938 0.500 13.781 -0.030 0.109 0.281

400 406.4 1.60 0.79 23.83 12.70 400.84 -0.76 2.77 7.9216 16.000 0.063 0.031 0.938 0.500 157.81 -0.030 0.109 0.312

450 457.2 1.60 0.79 25.40 12.70 451.64 -0.76 2.77 7.9218 18.000 0.063 0.031 1.000 0.500 17.781 -0.030 0.109 0.312

500 508.0 1.60 0.79 25.40 12.70 502.44 -0.76 2.77 7.9220 20.000 0.063 0.031 1.000 0.500 19.781 -0.030 0.109 0.312

600 609.6 1.60 0.79 25.40 14.27 600.86 -0.76 4.37 9.5324 24.000 0.063 0.031 1.000 0.562 23.656 -0.030 0.172 0.375

Cut Groove Standard Specification for Steel & Other IPS Pipe(Page 2 of 2)


TB

D

COD

A





(5) Minimum Wall Thickness “T” is the minimum wall thickness that should be cut grooved.



Preparation

Equipment

231

1. Square cut: Max. allowable tolerances from square cut are 1.6mm (0.060" ).

2. The gasket seating surface ‘A’ shall be free from deep scores, marks, or ridges that would prevent a positive seal.

3. The ‘C’ dimensions are average values. The groove must be of uniform depth around the entire circumference. Use a GRINNELL groove or rule to check the groove diameter.

4. The ‘T’ is the minimum allowable wall thickness that may be roll-grooved.

5. The ‘D’ is for reference use only. The groove depth shall be determined by the groove diameter ‘C’.

6. Flare Diameter: The pipe end that may flare when the groove is rolled shall be within this limit when measured at the extreme end of the pipe.

NominalSizemm

Inches

Pipe Outside Diameter

A±0.03mm

±0.8"mm

Inches

B±0.03mm

±0.8"mm

Inches

C+0, -0.063mm

+0, -1.6"mm

Inches

DNominal Groove Depth

mmInches

TMin. Allow

Wall ThicknessMax

AllowedFlare Dia.

mmInches

O.D.mm

Inches

Tolerance

mmInches

mmInches

Roll Grooved

mmInches

Cut Grooved

mmInches

650 660.4 +2.36 -0.79 44.5 15.9 647.7 6.4 9.5 15.9 665.526 26.0 -0.093 -0.031 1.75 0.625 25.5 0.25 0.375 0.625 26.2

700 711.2 +2.36 -0.79 44.5 15.9 698.5 6.4 9.5 15.9 716.328 28.0 -0.093 -0.031 1.75 0.625 27.5 0.25 0.375 0.625 28.2

750 762.0 +2.36 -0.79 44.5 15.9 749.3 6.4 9.5 15.9 767.130 30.0 -0.093 -0.031 1.75 0.625 29.5 0.25 0.375 0.625 30.2

800 812.8 +2.36 -0.79 44.5 15.9 800.1 6.4 9.5 15.9 817.932 32.0 -0.093 -0.031 1.75 0.625 31.5 0.25 0.375 0.625 32.2

900 914.4 +2.36 -0.79 44.5 15.9 901.7 6.4 9.5 15.9 919.536 36.0 -0.093 -0.031 1.75 0.625 35.5 0.25 0.375 0.625 36.2

1000 1016.0 +2.36 -0.79 44.5 15.9 1003.3 6.4 9.5 15.9 1026.240 40.0 -0.093 -0.031 1.75 0.625 39.5 0.25 0.375 0.625 40.4

1050 1066.8 +2.36 -0.79 50.8 15.9 1054.1 6.4 9.5 15.9 1071.942 42.0 -0.093 -0.031 2.00 0.625 41.5 0.25 0.375 0.625 42.2

Standard Roll Groove for Large Diameter IPS Pipe

BT

COD

D

A

www.grinnell.com


Preparation

Equipment


1. EP cut-grooves are for plastic coated or cement lined pipe to be connected with XH-70EP couplings only. Do not roll groove pipe, which can damage the coating or lining and or create flared pipe ends.

2. Always use plain-end square cut pipe. Do not use beveled end pipe.

3. Always use an EP gasket with a XH-70EP coupling. Do not use a standard gasket.

4. The gasket seating area shall be free from deep scores, marks, or ridges that could prevent a positive seal.

NominalSizemm

Inches

Pipe O. D. Gasket Seat A Groove Width B Groove Dia. C Groove Depth

d (ref.)

Basicmm

Inches

Tolerance Basicmm

Inches

Tol.±

Basicmm

Inches

Tol.+0.25/+0.010

Basicmm

Inches

Tol.+0/+0mm

Inchesmm

Inches50 60.3 +0.61 -0.61 14.27 ±0.25 6.48 -0.13 57.15 -0.38 1.602 2.375 +0.024 -0.024 0.562 ±0.010 0.255 -0.005 2.250 -0.015 0.063

65 73.0 +0.74 -0.74 14.27 ±0.25 6.48 -0.13 69.09 -0.46 1.982 1

2 2.875 +0.029 -0.29 0.562 ±0.010 0.255 -0.005 27.20 -0.018 0.078

80 88.9 +0.89 -0.79 14.27 ±0.25 6.48 -0.13 84.94 -0.46 1.983 3.500 +0.035 -0.031 0.562 ±0.010 0.255 -0.005 3.344 -0.018 0.078

100 114.3 +1.14 -0.79 15.37 ±0.38 7.75 -0.13 110.08 -0.51 2.114 4.500 +0.045 -0.031 0.605 ±0.015 0.305 -0.005 4.334 -0.020 0.083

150 168.3 +1.60 -0.79 15.37 ±0.38 7.75 -0.13 163.96 -0.56 2.166 6.625 +0.063 -0.031 0.605 ±0.015 0.305 -0.005 6.455 -0.022 0.085

200 219.1 +1.60 -0.79 18.14 ±0.38 10.16 -0.25 214.4 -0.64 2.348 8.625 +0.063 -0.031 0.714 ±0.015 0.400 -0.010 8.441 -0.025 0.092

250 273.0 +1.60 -0.79 18.14 ±0.38 10.16 -0.25 268.28 -0.69 2.3910 10.750 +0.063 -0.031 0.714 ±0.015 0.400 -0.010 10.562 -0.027 0.094

300 323.9 +1.60 -0.79 18.14 ±0.38 10.16 -0.25 318.29 -0.76 2.7712 12.750 +0.063 -0.031 0.714 ±0.015 0.400 -0.010 12.531 -0.030 0.109

End Protection (EP) Cut-Groove Specification

TB

d

COD

A

This chart should only be used with End Protection (EP) Piping components (pages 32, 170 thru 174)

GASKETS

233

www.grinnell.com

GASKETS

Gaskets


Pressure responsive gaskets are offered in a variety of types. Although they each serve a specific function they all utilize the same sealing design.

The GRINNELL gasket is designed to provide a three-way sealing action.

(1) Installation of the gasket over the outside sealing surface of the pipe compresses the lip seal and forms the initial seal.

(2) The installation of the housing segments around the gasket and into the pipe groove properly positions the gasket. Tightening of the housing segments forms the gasket to the inside of the housing and compresses it around the pipe-sealing surface thus increasing the gasket’s sealing against the pipe.

(3) The introduction of the system pressure energizes the pressure responsive seal of the gasket and further enhances the sealing action.

First SealC-shaped rubber gasket seals on pipe ends.

Second SealThe housings compress the gasket to increase the sealing capacity.

Third SealThe system pressure or vacuum will then maximize the leak-tight seal.

GRINNELL Gasket SealTech Data Sheet: G610



GRINNELL Gaskets should only be used on GRINNELL Couplings.

For Shurjoint replacement gaskets, please contact your local Sales Representative.

NSF Approved for Potable Water Applications, contact a GRINNELL Sales Representative for details


GASKETS

Gaskets

235

Standard The standard style gasket, with a “C” shape configuration, is the most commonly used. It is provided as the standard gasket in the Figure 705, 707, 770, 772, 780, 405, and 472 GRINNELL Couplings. The gasket is available in Grade “E” and “EN” EPDM, Grade “T” Nitrile, Grade “L” Silicone, and Grade “O” Fluoroelastomer.

Tri-Seal The tri-seal gasket is designed to close off the gap or gasket cavity. This is accomplished by positioning the centre “rib” of the gasket over the gap between the pipes. The tri-seal gasket has two tapered sealing edges in addition to the centre rib for additional strength and sealing.

The Tri-Seal gasket can be used with the Figure 705, 707, 770, 772, 405, and 472 GRINNELL Couplings. It is recommended for use in low temperature and vacuum services (greater than 10" Hg (250mm Hg)) applications and potable water systems. Note only a petroleum-free silicone based lubricant is recommended for low temperature applications. The gasket is available in Grade “E”, “EN” EPDM, and Grade “T” Nitrile. Note: Rigid couplings are recommended for vacuum and low temperature applications.

Centre-Stop, Push-On The Grade “EHT” EPDM Centre-Stop, Push-On Style Gasket is specially designed for easy installation of the GRINNELL Figure 740 Pivot-Bolt Coupling.

Reducing Coupling The reducing gasket is provided with ribs used to position the larger pipe so that the sealing lip is located on the sealing surface of the pipe. This gasket is used only with the Figure 716 GRINNELL Reducing Coupling and is available in Grade “E” EPDM and Grade “T” Nitrile.

Reducing couplings are not recommended for low temperature applications.

Flange Adapter This gasket is specifically designed for use with the Figure 71 Flange Adapter. The gasket has an optimum amount of rubber to provide a dependable seal between both the pipe and mating surface. The gasket is available in Grade “E” EPDM and Grade “T” Nitrile.

Outlet Fittings The gasket provides a compression type seal, which is designed to conform to the exterior curve (OD) of the pipe. This design is unique to the Figure 730 Mechanical Tee (threaded and grooved). The gasket is available in Grade “E” EPDM and Grade “T” Nitrile. Note: When used in low temperature applications, use a petroleum-free silicone based lubricant, otherwise no lubricant is required on Mechanical Tee and Strap gaskets.

Outlet CouplingThis gasket is specifically designed for use with the GRINNELL Figure 702 Outlet Coupling.

Plain End CouplingThis gasket is designed for use with the Figure 909 Plain End Coupling.

GRINNELL gaskets are designed exclusively for use with GRINNELL manufactured coupling housings. The mixing of other manufacturer’s gaskets or housings with GRINNELL gaskets or housings may result in pipe joint leakage or failure and will void the GRINNELL Mechanical Products Limited Warranty.

GRINNELL Gasket StylesTech Data Sheet: G610

GRINNELL Gaskets should only be used on GRINNELL Couplings. For Shurjoint replacement gaskets, please contact your local Sales Representative.

www.grinnell.com

GASKETS

Gaskets


The Gasket Recommendation Table has been developed to assure maximum service life. The table was developed from information supplied by the material manufacturers of the elastomer, technical reference literature, and testing conducted by GRINNELL Mechanical Products.

In evaluating the gasket grade for intended service applications the following consideration must be reviewed: system operating temperature, fluid or solution concentration, and duration of service.

All gasket recommendations are based on a temperature of 21°C (70°F) unless otherwise noted.

Technical and Engineering Services should be consulted if combinations of service solutions are being considered.

Email: [email protected] Phone: +31 (0)53 428 4444 Fax: +31 (0)53 428 3377

Contact a GRINNELL Sales Representative for recommendations for services not listed.

Gasket recommendations apply to GRINNELL gaskets and valves only.

Grade Temperature Range

Compound Colour Code

General Service Application

“E” -34°C to 110°C(-30°F to 230°F)

EPDM Green Stripe

Hot water, dilute acids, alkalies, oil free air, and many chemical services not involving petroleum products.Excellent oxidation resistance.Not for use with hydrocarbons.Not recommended for steam service.

“E” Tri- Seal

-34°C to 110°C(-30°F to 230°F)

EPDM Green Stripe

Hot water, dilute acids, alkalies, and many chemical services not involving petroleum products.Excellent oxidation resistance.Not for use with hydrocarbons.Recommended for low temperature and vacuum services.

“EN” and “EN” Tri-Seal for IPS Pipe

Potable Water up to 82°C (180°F)

EPDMGreen/Yellow

Stripe

IPS Sizes Only, Approved for Potable Water Applications, contact a GRINNELL Sales Representative for detailsNot recommended for hydrocarbons.

“EHT” Centre-Stop

Push-On Style

For closed-loop heating systems -34°C to 120°C

(-30°F to 250°F )Potable Water up to

82°C (180°F)

EPDMGreen and

Red Striped

Approved for Potable Water Applications, contact a GRINNELL Sales Representative for detailsRecommended for use in low temperature and vacuum systems Not recommended for hydrocarbons.

“T” and “T” Tri- Seal

-29°C to 82°C(-20°F to 180°F)

Nitrile Orange Stripe

Compressed air, petroleum products, vegetable oils, mineral oils, and air with oils.High-End oil vapor temperature, decrease to 66°C (150°F ).Not recommended for hot water systems.Not recommended for hot dry air systems.

“O” and “O” Tri- Seal

-7°C to 149°C(+20°F to 300°F)

Fluoroelastomer Blue Stripe Oxidizing acids, petroleum products, hydraulic fluids, lubricants, halogenated hydrocarbons.

“L” -34°C to 177°C(-30°F to 350°F)

Silicone * Red StripeAir without hydrocarbons, dry heat.

* To prevent gasket from deteriorating, NEVER use silicone-based lubricants with Grade “L” Silicone gaskets.For local country potable water approvals contact a GRINNELL Sales Representative.

GRINNELL Gasket Grade & RecommendationsTech Data Sheet: G610

The Tri-Seal Grade E freezer gasket is used primarily for dry pipe fire protection systems, vacuum service, and

freezer applications. The Tri-Seal freezer gasket differs from standard gaskets by closing off the gap of gasket cavity. This is accomplished by positioning the centre “rib” of the gasket over the gap between the pipes. The Tri-Seal freezer gasket has two tapered sealing edges in addition to the centre rib for additional strength and sealing.

The Tri-Seal freezer gasket is available in sizes 32mm to 300mm (11⁄4" to 12") and is designed for use with GRINNELL Figure 705, 705R, 707, 774, 772, 405 and 472 Couplings. A petroleum-free silicone based lubricant is recommended for all dry pipe systems.

They are intended primarily for low-temperature, dry systems in cold storage, freezer applications and vacuum applications greater than 10 inches of mercury.

Note: Rigid couplings are preferred for vacuum, dry pipe and freezer applications.

Tri-Seal Freezer Gasket



GASKETS

Gaskets

237

engineering evaluation and recommendation where the gasket grade is shown in parenthesis.

For low temperature applications, use a petroleum-free silicone lubricant.

for the service intended.

temperature of 21°C (70°F).

Representative for recommendation.

grade is listed first.

Service Gasket Grade

Air, (no oil vapors) Temp. -34°C to 110°C (-30°F to 230°F) EAir, Oil Vapor Temp. -29°C to 66°C (-20°F to 150°F) TWater, Temp. to 110°C (230°F)(NOT RECOMMENDED FOR STEAM SERVICE)

E

Water, Acid Mine E/TWater, Chlorine EWater, Deionized EWater, Seawater EWater, Waste (NO PETROLEUM PRODUCTS) E

Service Gasket Grade

Crude Oil - Sour TDiesel Oil TFuel Oil TGasoline, Leaded THydraulic Oil TKerosene TLube Oil, to 66°C (150°F ) TMotor Oil TTar and Tar Oil T

GRINNELL Gasket Air, Water & Chemical Recommendations(Page 1 of 3)


Chemical Composition

Gasket Grade

ASTM #3 Oil T

Acetaldehyde E

Acetamide T

Acetic Acid up to 10% 38°C (100°F ) E

Acetic Acid up to 10-50% 38°C (100°F ) L

Acetic Acid, Glacial 38°C (100°F ) L

Acetic Anhydride E

Acetone E

Acetonitrile T

Acetylene E/T

Adipic Acid T

Alkalis E

Allyl Alcohol to 96% E

Alum Sulfuric Acid O

Alums E/T

Aluminum Chloride E/T

Aluminum Fluoride E/T

Aluminum Hydroxide E

Aluminum Nitrate E/T

Aluminum Oxychloride T

Aluminum Phosphate E

Aluminum Salts T

Aluminum Sulfate E/T

Ammonia Gas, Cold E

Ammonia, Liquid E

Ammonium Bifluoride T

Ammonium Carbonate E

Ammonium Chloride E/T


Gasket Grade

Ammonium Fluoride E

Ammonium Hydroxide E

Ammonium Metaphosphate E

Ammonium Nitrate T

Ammonium Nitrite E

Ammonium Persulfate, to 10% E

Ammonium Phosphate T

Ammonium Sulfamate T

Ammonium Sulfate E/T

Ammonium Sulfide E

Ammonium Thiocyanate E

Amyl Acetate E

Amyl Alcohol E

Amyl Chloronaphthalene T

Anderol O

Aniline E

Aniline Dyes E

Aniline Hydrochloride E

Aniline Oil E

Antimony Chloride E

Antimony Trichloride E

Argon Gas E/O

Aroclor(S) O

Arsenic Acid, to 75% T

Barium Carbonate E

Barium Chloride E/T

Barium Hydroxide E/T


Gasket Grade

Barium Sulfide T

Benzaldehyde E

Benzene O

Benzine (see Petroleum Ether) O

Benzoic Acid E

Benzol O

Benzyl Alcohol E

Benzyl Benzoate E

Black Sulfate Liquor T

Blast Furnace Gas T

Bleach,12% Active E

Borax Solutions E

Bordeaux Mixture E

Boric Acid E/T

Bromine O

Butane Gas T

Butanol (see Butyl Alcohol) E/T

Butyl Acetate Ricinoleate E

Butyl Alcohol E/T

Butyl “Cellosolve Adipate” E/T

Butyl Phenol E

Butyl Stearate T

Butylene T

Butylene Glycol E

Calcium Acetate T

Calcium Bisulphite T

Calcium Chloride E/T


Gasket Grade

Calcium Hydroxide E/T

Calcium Hypochlorite E

Calcium Hypochloride E

Calcium Nitrate E/T

Calcium Sulfate E/T

Calcium Sulfide E/T

Caliche Liquors T

Carbitol E/T

Carbonic Acid, Phenol O

Carbon Bisulfide O

Carbon Dioxide, Dry E/T

Carbon Dioxide, Wet E/T

Carbon Disulfide O

Carbon Monoxide E

Carbon Tetrachloride O

Caustic Potash E/T

Cellosolve Acetate E

Cellosolve (Alcohol Ether) E

Cellulose Acetate E

Cellulube 220 (Tri-Aryl-Phosphate) E

Cellulube Hydraulic Fluids E

China Wood Oil, Tung Oil T

Chloric Acid to 20% E

Chlorine, Dry O

Chlorine, Water 4000 PPM (max.) E

Chlorinated Paraffin (Chlorocosane) T

Water & Air Petroleum Products


www.grinnell.com

GASKETS

Gaskets



Gasket Grade

Chloroacetic Acid E

Chloroacetone E

Chlorobenzene O

Chloroform O

Chrome Alum T

Chrome Plating Solutions O

Chromic Acid, to 25% O

Citric Acid E/T

Coke Oven Gas T/O

Copper Chloride T

Copper Cyanide E/T

Copper Fluoride E

Copper Nitrate E/T

Copper Sulfate E/T

Creosol, Cresylic Acid O

Creosote, Coal Tar O

Creosote, Wood O

Cupric Fluoride T

Cupric Sulfate T

Cyclohexane (Alicyclic Hydrocarbon) O

Cyclohexanone E

Deionized Water E

Dextrim T

Dibutyl Phthalate E

Dichloro Difloro Methane T

Dicyclohexylamine T

Diesel Oil T

Diethyl Ether T

Diethyl Sebacate E

Diethylamine T

Diethylene Glycol E/T

Digester Gas T

Dimethylamine T

Dioctyl Phthalate E

Dioxane E

Dipentene (Terpene-Hydrocarbon) T

Dipropylene Glycol T

Dowtherm A O

Dowtherm E O

Dowtherm SR-1 T/E

Ethane E

Ethanolamine E

Ethyl Acetoacetate E

Ethyl Acrylate L

Ethyl Alcohol E

Ethyl Cellulose E


Gasket Grade

Ethyl “Cellusolve” E

Ethyl Chloride E

Ethyl Ether T

Ethyl Oxalate E

Ethyl Silicate T

Ethylene Chlorohydrin E

Ethylene Diamine T

Ethylene Dichloride (Dichloroethane) O

Ethylene Glycol E/T

Ferric Chloride, to 35% E/T

Ferric Chloride, Saturated E

Ferric Hydroxide E

Ferric Sulfate T

Fire Fighting Foam Concentrate E/O

Fluboric Acid E/T

Fly Ash E

FM200 HFC-227ea E

Fog Oil T

Formaldehyde E/T

Formamide E/T

Formic Acid E

Freon 11, 54°C (130°F ) T

Freon 12, 54°C (130°F ) T

Freon 113 54°C (130°F ) T

Freon 114, 54°C (130°F ) T

Freon 134a, 80°C (176°F ) E/T

Fructose E/T

Fuel Oil T

Fumaric Acid E

Furfuryl Alcohol E

Gasoline, Refined T

Gasoline, Refined, Unleaded O

Glue E/T

Glycerin E/T

Glycerol E/T

Glycol E/T

Glycolic Acid E

Grease T

Green Sulfate Liquor T

Halon 1301 E

Heptane T

Hexaldehyde E

Hexane T

Hexanol Tertiary T

Hexyl Alcohol T

Hexylene Glycol T


Gasket Grade

Hydrobromic Acid, to 40% E

Hydrochloric Acid, to 36%, 24°C (75°F ) E

Hydrochloric Acid, to 36%, 70°C (158°F ) O

Hydrocyanic Acid E

Hydrofluoric Acid, to 75%, 24°C (75°F ) O

Hydrofluosilicic Acid E

Hydrogen Gas, Cold E/T

Hydrogen Gas, Hot E

Hydrogen Peroxide, to 50% L

Hydrogen Peroxide, to 90% O

Hydrogen Sulfide E

Hydroquinone T

Hydroxylamine Sulfate E

Hypochlorous Acid, Dilute E

Iso Octane, 38°C (100°F ) T

Isobutyl Alcohol E

Isopropyl Acetate E

Isopropyl Alcohol E

Isopropyl Ether T

JP-3 T

JP-4 T

JP-5, 6, 7, 8 T

Kerosene T

Ketones E

Latex (1% Styrene & Butadiene) O

Lauric Acid T

Lavender Oil T

Lead Acetate T

Lead Chloride E

Lead Sulfate T

Lime and H2O E/T

Linoleic Acid O

Lithium Bromide T

Lithium Chloride T

Lubricating Oil, Refined T

Lubricating Oil, Sour T

Lubricating Oil, to 66°C (150°F ) T

Magnesium Chloride E/T

Magnesium Hydroxide E/T

Magnesium Sulfate E/T

Maleic Acid T

Malic Acid T


Gasket Grade

Mercuric Chloride E/T

Mercuric Cyanide T

Mercurous Nitrate E/T

Mercury T

Methane T

Methyl Alcohol, Methanol E/T

Methyl Chloride O

Methyl Ethyl Ketone E

Methyl Isobutyl Carbinol E

Methylene Chloride O

Methylene Dichloride 38°C (100°F ) O

MIL-L7808 O

MIL-05606 O

MIL-08515 O

Mineral Oils T

Naptha, 71°C (160°F ) O

Napthenic Acid T

Natural Gas T

Nevoil E

Nickel Chloride E/T

Nickel Plating Solution 52°C (125°F ) E/T

Nickel Sulfate E/T

Nitric Acid to 10%, 24°C (75°F ) E

Nitric Acid, 10-50%, 24°C (75°F ) O

Nitric Acid, 50-86%, 24°C (75°F ) O

Nitric Acid, Red Fuming O

Nitromethane E

Nitrous Oxide E

NOVEC 1230 FK-5-1-12 E

Ogisogiric Acid, to 75%, 66°C (150°F ) O

Oil, Crude Sour T

Oil, Motor T

Oleic Acid T

Oronite 8200 Silicate Ester Fluid O

Orthodichloro- benzene O

OS-45 Silicate Ester Fluid O

OS-45-1 O

Oxalic Acid E

Oxygen, Cold E

Ozone E

Palmitic Acid T





GASKETS

Gaskets

239


Gasket Grade

Pentane T

Perchloroethylene O

Petroleum Ether (see Benzene) O

Petroleum Oils T

Phenol (Carbolic Acid) O

Phenylhydrazine E

Phenylhydrazine Hydrochloride E

Phosphate Ester E

Phosphoric Acid, to 75% and 21°C (70°F ) E/T

Phosphoric Acid, to 85% and 93°C (200°F ) O

Photographic Solutions T

Phthalic Anhydride E

Polybutene T

Polyvinyl Acetate, Solid (In Liquid State is 50% solution of Methanol or 60% solution of H2O)

E

Potassium Alum E/T

Potassium Bicarbonate E/T

Potassium Bichromate E/T

Potassium Borate E

Potassium Bromate E

Potassium Bromide E/T

Potassium Carbonate E/T

Potassium Chlorate E

Potassium Chloride E

Potassium Chromate T

Potassium Cyanide E/T

Potassium Dichromate E

Potassium Ferricyanide E

Potassium Ferrocyanide E

Potassium Fluoride E

Potassium Hydroxide T

Potassium Nitrate T

Potassium Perborate E

Potassium Perchlorate T

Potassium Permanganate,Saturated to 10%

E

Potassium PermaganateSaturate 10-25%

E

Potassium Persulfate T

Potassium Silicate E/T

Potassium Sulfate T

Prestone T

Propane Gas T *


Gasket Grade

Propanol E

Propargyl Alcohol E

Propyl Alcohol T

Propylene Dichloride L

Propylene Glycol E

Pyranol 1467 T

Pyranol 1476 T

Pyroguard “C” T

Pyroguard “D” T

Pyroguard 55 E

Pyrrole E

Ref. Fuel (70 ISO Octane, 30 Toluene) T

Rosin Oil T

Salicylic Acid E

Secondary Butyl Alcohol T

Sewage E/T

Silver Nitrate E

Silver Sulfate E

Skydrol, 93°C (200°F ) L

Skydrol 500 Phosphate Ester E

Soap Solutions E/T

Soda Ash, Sodium Carbonate E/T

Sodium Acetate E

Sodium Alum T

Sodium Benzoate E

Sodium Bicarbonate E/T

Sodium Bisulfate E/T

Sodium Bisulfite (Black Liquor) E/T

Sodium Bromide E/T

Sodium Carbonate E/T

Sodium Chlorate E

Sodium Chloride E/T

Sodium Cyanide E/T

Sodium Dichromate, to 20% E/T

Sodium Ferricyanide E/T

Sodium Ferrocyanide E/T

Sodium Fluoride E/T

Sodium Hydro Sulfide T

Sodium Hydroxide to 50% E

Sodium Hypochlorite, to 20% E

Sodium Metaphosphate T

Sodium Nitrate E

Sodium Nitrite E/T


Gasket Grade

Sodium Perborate E

Sodium Peroxide E

Sodium Phosphate, Dibasic T

Sodium Phosphate, Monobasic T

Sodium Phosphate, Tribasic T

Sodium Silicate T

Sodium Sulfate E/T

Sodium Sulfide T

Sodium Sulfite Solution, to 20% T

Sodium Thiosulfate, “Hypo” T

Sohovis 47 T

Sohovis 78 T

Solvasol #1 T

Solvasol #2 T

Solvasol #3 T

Solvasol #73 T

Spindle Oil T

Stannic Chloride T

Stannous Chloride, to 15% T

Starch T

Stearic Acid T

Stoddard Solvent T

Styrene O

Sulfonic Acid E

Sulphite Acid Liquor E

Sulfur E

Sulfur Chloride O

Sulfur Dioxide, Dry E/T

Sulfur Dioxide, Liquid E

Sulfur Trioxide, Dry O

Sulfuric Acid, to 25%, 66°C (150°F ) E

Sulfuric Acid, 25-50%, 93°C (200°F ) O

Sulfuric Acid, 50-95%, 66°C (150°F ) O

Sulfuric Acid, Fuming O

Sulfuric Acid, Oleum O

Sulfurous Acid O

Tall Oil T

Tanning Liquors (50g. alum. solution, 50g. dichromate solution)

T

Tartaric Acid E

Tertiary Butyl Alcohol E/T

Tetrabutyl Titanate E


Gasket Grade

Tetrachloroethylene O

Thionyl Chloride T

Terpineol T

Titanium Tetrachloride O

Toluene, 30% T

Transmission Fluid, Type A O

Triacetin T

Trichloroethane O

Trichloroethylene, to 93°C (200°F ) O

Tricresyl Phosphate E

Triethanolamine E/T

Trisodium Phosphate E

Tung Oil T

Turbo Oil #15 Diester Lubricant O

Turpentine T

Urea T

Vegetable Oils T

Vinyl Acetate E

Vi-Pex T

Water, to 66°C (150°F ) E/T

Water, to 93°C (200°F ) E

Water, to 110°C (230°F) E

Water, Acid Mine E/T

Water, Chlorine E

Water, Deionized E

Water, Potable EN

Water, Seawater E

Water, Waste E/T

White Liquor E

Wood Oil T

Xylene O

Zinc Chloride, to 50% E

Zinc Nitrate E

Zinc Sulfate E/T



Note: Contact GRINNELL for an Engineering evaluation and recommendation where the gasket grade is shown in parenthesis. For dry pipe systems or freezer systems, use Tri-Seal freezer gasket and petroleum free silicone lubricant. Check gasket colour code to be certain it is recommended for the service intended. Unless otherwise noted, all gasket listings are based upon a temperature of 21°C (70°F). For services not listed contact GRINNELL for recommendation. Where more than one gasket is shown, the preferred gasket grade is listed first.


www.grinnell.com

GASKETS

Gaskets


The below table will give an indication on the number of gaskets which can be lubricated with 1 kg lubricant

Part Number

TraditionalLubricant

Approx. Weight

kgLbs.

70006E English Label0.51.1

70008E English Label1.02.2

70009E German Label1.02.2

70010E French Label1.02.2

70011E Dutch Label1.02.2

70013E Spanish Label1.02.2

70015E Swedish Label1.02.2

Part Number

Quick DryLubricant

Approx. Weight

kgLbs.

70006B English Label0.51.1


70009B German Label1.02.2

70010B French Label1.02.2

70011B Dutch Label1.02.2

70013B Spanish Label1.02.2

70015B Swedish Label1.02.2

Part Number

GETL(GRINNELL Extreme

Temperature Lubricant)

Approx. Weight

kgLbs.


Part Number

Lubricantfor Potable Water

Approx. Weight

kgLbs.

VR69-252 With KTW Certificate

1.02.2

Application TraditionalLubricant

Quick DryLubricant

GETL(GRINNELL

ExtremeTemperature

Lubricant)

Fire Protection

Chilled Water

Heating

Compressed Air

Drainage

Sewage

Process < 66°C (150°F )

Process > 66°C (150°F )

GasketSizeDNIn.

TraditionalLubricant

Quick DryLubricant

GETL(GRINNELL Extreme

Temperature Lubricant)

32650 650 1000

1 14

40570 570 1000

1 12

50440 440 1000

280

300 300 7003

100220 220 500

4150

135 135 3006

200110 110 250

8250

85 85 20010300

65 65 16012

35055 55 140

14400

50 50 12016

45038 38 90

18500

33 33 8020600

20 20 5024

During installation of a GRINNELL Coupling, always lubricate the gasket. For couplings using the tri-seal gasket in a low temperature application, use a petroleum-free silicone based lubricant. For mechanical tees and straps when used in low temperature applications, use a petroleum-free silicone based lubricant, otherwise no lubricant is required.

GRINNELL Mechanical Piping Products recommends two kinds of lubricant:

* 7 Release Compound (Silicone)

Check lubricant chart to be certain the proper lubricant is recommended for the service intended. For information on health safety, contact a GRINNELL Sales Representative for Material Safety Data Sheets (MSDS).

* Dow Corning is a registered trademark of Dow Corning Corporation.

GRINNELL Gasket LubricantsTech Data Sheet: G610

GRINNELL Gaskets should only be used on GRINNELL Couplings. For Shurjoint replacement gaskets, please contact your local Sales Rep.


GASKETS

Gaskets

241

GRINNELL Replacement Gaskets for Figure 740, 705, 774, 707, 770 and 772

(Page 1 of 2)

Pipe Size EPDM NitrileNominal

mmInches

O.D.mm

Inches

Grade E C-Style

Grade E Tri-Seal

Grade EHT Push-On Style

EPDM Grade EN*

C-Style

Grade T C-Style

Grade T Tri-Seal

Grade T Push-On Style

25 33.710EPDM – – 10EPDM-PW 10BUNA – –

1 1.31532 42.4

12EPDM 12EPDM-TRI – 12EPDM-PW 12BUNA – –1 1

4 1.66040 48.3

15EPDM 15EPDM-TRI – 15EPDM-PW 15BUNA – –1 1

2 1.90050 60.3

20EPDM 20EPDM-TRI 74020EPDME 20EPDM-PW 20BUNA – 74020NITRILS2 2.37565 73.0

25EPDM 25EPDM-TRI 74025EPDME 25EPDM-PW 25BUNA – 74025NITRILS2 1

2 2.87565 76.1

26EPDM 26EPDM-TRI – 26EPDM-PW 26BUNA – –76.1mm 3.000

80 88.930EPDM 30EPDM-TRI 74030EPDME 30EPDM-PW 30BUNA – 74030NITRILS

3 3.500100 108.0

41EPDM – – – 41BUNA – –108.0mm 4.252


4 4.500125 133.0

51EPDM – – – 51BUNA – –133.0mm 5.236

125 139.752EPDM 52EPDM-TRI – 52EPDM-PW 52BUNA – –

139.7mm 5.500125 141.3

52EPDM 52EPDM-TRI 74050EPDME 52EPDM-PW 52BUNA – 74050NITRILS5 5.563

150 159.061EPDM – – – 61BUNA – –

159.0mm 6.260150 165.1

62EPDM 62EPDM-TRI – 62EPDM-PW 62BUNA – –165.1mm 6.500


6 6.625200 219.1

80EPDM 80EPDM-TRI 74080EPDME 80EPDM-PW 80BUNA – 74080NITRILS8 8.625

250 273.011EPDM 11EPDM-TRI – 11EPDM-PW 11BUNA – –

10 10.750300 323.9

13EPDM 13EPDM-TRI – 13EPDM-PW 13BUNA – –12 12.750

350 355.614EPDM – – – 14BUNA – –

14 14.000400 406.4

16EPDM – – – 16BUNA – –16 16.000

450 457.218EPDM – – – 18BUNA – –

18 18.000500 508.0

21EPDM – – – 21BUNA – –20 20.000600 609.6

24EPDM – – – 24BUNA – –24 24.000


Tri-Seal Style Gaskets


www.grinnell.com

GASKETS

Gaskets


GRINNELL Replacement Gaskets for Figure 740, 705, 774, 707, 770 and 772(Page 2 of 2)

Pipe Size Fluoro Elastomer SiliconeNominal

mmInches

O.D.mm

Inches

Grade O C-Style

Grade O Tri-Seal

Grade L C-Style

25 33.710VITON – 10SILICONE

1 1.31532 42.4

12VITON – 12SILICONE1 1

4 1.66040 48.3


2 1.90050 60.3

20VITON – 20SILICONE2 2.37565 73.0


2 2.87565 76.1

26VITON – 26SILICONE76.1mm 3.000


3 3.500100 108.0

– – –108.0mm 4.252


4 4.500125 133.0

– – –133.0mm 5.236


139.7mm 5.500125 141.3

52VITON – 52SILICONE5 5.563

150 159.0– – –

159.0mm 6.260150 165.1

62VITON – 62SILICONE165.1mm 6.500


6 6.625200 219.1



10 10.750300 323.9



14 14.000400 406.4


450 457.218VITON – –

18 18.000500 508.0

21VITON – –20 20.000600 609.6

24VITON – –24 24.000


Tri-Seal Style Gaskets



GASKETS

Gaskets

243

Pipe Size Figure 71 Flange Adapter

Figure 780 Snap Coupling

Figure 909 Plain End Coupling

Nominal mm

Inches

O.D.mm

Inches

EPDM Grade E

Nitrile Grade T

EPDM Grade E

Nitrile Grade T

EPDM Grade E

Nitrile Grade T

25 33.7– – – – – –

1 1.315

32 42.4– – – – – –

1 14 1.660

40 48.3– – 15EPDM780 15BUNA780 – –

1 12 1.900

50 60.320EPDM71 20BUNA71 20EPDM780 20BUNA780 20EPDM909 20BUNA909

2 2.375


2 12 2.875

65 76.126EPDM71 26BUNA71 26EPDM780 26BUNA780 – –

76.1mm 3.000


108.0mm 4.252100 114.3

– – – – – –4 4.500


133.0mm 5.236125 139.7

– – – – – –139.7mm 5.500


5 5.563150 159.0

52EPDM71 52BUNA71 53EPDM780 53BUNA780 – –159.0mm 6.260

150 165.1– – – – – –

165.1mm 6.500


6 6.625


8 8.625


10 10.750

300 323.911EPDM71 11BUNA71 – – 11EPDM909 11BUNA909

12 12.750

350 355.613EPDM71 13BUNA71 – – – –

14 14.000400 406.4

– – – – – –16 16.000

450 457.2– – – – – –

18 18.000500 508.0

– – – – – –20 20.000600 609.6

– – – – – –24 24.000


GRINNELL Replacement Gaskets for Figure 71, 780, & 909

Figure 909 GasketsFigure 780 GasketsFigure 71 Gaskets


www.grinnell.com

GASKETS

Gaskets


GRINNELL Replacement Gaskets for Figure 716

Pipe SizeEPDM Grade E

716-StyleNitrile Grade T

716-StyleNominal

mmInches

O.D.mm

Inches50 x 40 60.3 x 48.3

EPDM2015 BUNA20152 x 1 1

2 2.375 x 1.900

65 x 50 73.0 x 60.3EPDM2520 BUNA2520

2 12 x 2 2.875 x 2.375

65 x 50 76.1 x 60.3EPDM2620 BUNA2620

76.1 x 2 3.000 x 2.375

80 x 50 88.9 x 60.3EPDM3020 BUNA3020

3 x 2 3.500 x 2.375

80 x 65 88.9 x 73.0EPDM3025 BUNA3025

3 x 2 12 3.500 x 2.875

80 x 65 88.9 x 76.1EPDM3026 BUNA3026

3 x 76.1mm 3.500 x 3.000

100 x 60 114.3 x 60.3EPDM4220 BUNA4220

4 x 2 4.500 x 2.375

100 x 65 114.3 x 73.0EPDM4225 BUNA4225

4 x 2 12 4.500 x 2.875

100 x 65 114.3 x 76.1EPDM4226 BUNA4226

114.3 x 76.1mm 4.500 x 3.000

100 x 80 114.3 x 88.9EPDM4230 BUNA4230

4 x 3 4.500 x 3.500

125 x 100 139.7 x 114.3EPDM5242 BUNA5242

139.7mm x 4 5.500 x 4.500

125 x 100 141.3 x 114.3EPDM5342 BUNA5342

5 x 4 5.563 x 4.500

150 x 100 165.1 x 114.3EPDM6242 BUNA6242

165mm x 4 6.500 x 4.500

150 x 100 168.3 x 114.3EPDM6342 BUNA6342

6 x 4 6.625 x 4.500

150 x 125 168.3 x 141.3EPDM6553 BUNA6553

6 x 5 6.625 x 5.563

200 x 150 219.1 x 168.3EPDM8063 BUNA8063

8 x 6 8.625 x 6.625


Reducing Coupling The reducing gasket is provided with ribs used to position the larger pipe so that the sealing lip is located on the sealing surface of the pipe. This gasket is used only with the Figure 716 GRINNELL Reducing Coupling and is available in Grade “E” EPDM and Grade “T” Nitrile.



GASKETS

Gaskets

245

GRINNELL Replacement Gaskets for Figure 730

Run Sizemm

Inches

Outlet Sizemm

Inches

EPDM Grade E

730-Style

Nitrile Grade T

730-Style

50. 65. 80. 100 15. 20. 251EPDM730 1BUNA730

2, 2 12, 3, 4 1

2, 3 4, 1

50. 80. 100 322EPDM730 2BUNA730

2, 3, 4 1 14

50 402EPDM730 2BUNA730

2 1 1 2

65. 80. 100. 150 403EPDM730 3BUNA730

2 1 2, 3, 4, 5, 6 1 1 2

65 323EPDM730 3BUNA730

2 12 1 1

4

150 323EPDM730 3BUNA730

6 1 14

65 503EPDM730 3BUNA730

2 1 2 2

80. 100. 125. 150. 200 504EPDM730 4BUNA730

3, 4, 5, 6, 8 2

100. 125 655EPDM730 5BUNA730

4, 5 2 12

150. 200 656EPDM730 6BUNA730

6, 8 2 12

100. 125 807EPDM730 7BUNA730

4, 5 3

150. 200 808EPDM730 8BUNA730

6, 8 3

150. 200 1009EPDM730 9BUNA730

6, 8 4


Outlet Size

Run Size

Outlet FittingsThe gasket provides a compression type seal, which is designed to conform to the exterior curve (OD) of the pipe. This design is unique to the Figure 730 Mechanical Tee (threaded and grooved). Note: When used in low temperature applications, use a petroleum-free silicone based lubricant, otherwise no lubricant is required on Mechanical Tee gaskets.


www.grinnell.com

GASKETS

Gaskets



PRESSURE & DESIGN DATA

247

www.grinnell.com


Pressure &

Design Data


Angular DeflectionGRINNELL Flexible Couplings are capable of accommodating angular deflection.

Expansion/ContractionGRINNELL Flexible Couplings are capable of accommodating pipe thermal movements provided they are properly gapped and a sufficient quantity of flexible couplings are used. Note that flexible couplings will not accommodate both full maximum linear movement and the maximum available angular deflection concurrently at the same joint.

If it is desired to have both deflection and linear movement available, then the system should have sufficient flexible joints to accommodate the requirement.

Rigid JointsGRINNELL Rigid Couplings provide rigid gripping of the pipe. They are designed to bring the pipe ends close together and to ensure the coupling clamps firmly onto the pipe OD and the bottom of the grooves. Because rigid couplings clamp around the entire pipe surface, they provide resistance to flexural and torsional loads and therefore permit longer spacing to ASME/ANSI B 31.1 (Power Piping) and ASME/ANSI B 39.1 (Building Services) requirements.

Flexible JointsGRINNELL Flexible Couplings act as an “expansion joint”, allowing linear and angular movement of the pipe. They are designed with the coupling keys engaging the pipe without gripping on the bottom of the grooves, while still providing for a restrained mechanical joint. This is particularly useful to allow for pipe expansion/contraction and piping misalignment.

For thermal expansion with flexible couplings, the pipe ends at each joint should be fully gapped to the maximum amount. This can be accomplished by pressurizing the system and then anchoring the system.

For thermal contraction with flexible couplings, the pipe ends at each joint should be fully butted. The system can then be anchored in place to prevent the pipe ends from opening up to the maximum end gap when pressurized.

Pipe Ends Butted for Contraction

End Gap

Pipe Ends Gapped for Expansion

For design purposes, the maximum pipe end gap should be reduced to account for field practices as follows:

The following values should be used as available pipe end movements for GRINNELL Figure 705, 707, and 716 Flexible Couplings:

The deflection published is a maximum value. For design purposes the maximum deflection should be reduced to account for field practices as shown:

Linear Movement (Flexible Couplings)

DesignTech Data Sheets: G810, G820, G830

End Gap Reduction

Pipe Sizemm

Inches

Maximum Pipe End Gap

42.4 – 88.950%

1 14 – 3

114.3 – 610.025%

4 – 24

Pipe End Movements

Pipe Size mm

Inches

Cut Grooved

mmInches

Roll Grooved

mmInches

42.4 – 88.9 0 – 1.6 0 – 0.81 1

4 – 3 0 – 0.063 0 – 0.031

114.3 – 610.0 0 – 2.4 0 – 2.44 – 24 0 – 0.188 0 – 0.094

* Roll grooved joints provide half the available movement of cut grooved joints.

Deflection

Pipe Sizemm

Inches

Maximum Pipe DeflectionReduction

42.4 – 88.950%

1 14 – 3

114.3 – 610.025%

4 – 24



Pressure &

Design Data

249

The following guidelines are similar to any expansion joint:It is recommended that anchors be installed at changes of direction on the pipe lines to control the pipe movement. The thermal expansion/contraction in the piping system can be accommodated using GRINNELL Flexible Couplings. In designing anchoring systems, it is suggested that the following be taken into consideration:

Three methods are available as examples to accommodate thermal expansion/contraction:

(1) Design the system with rigid couplings and place expansion joints at the proper locations. Expansion joints may be a series of flexible grooved couplings of a sufficient quantity to accommodate the movement.

(2) Design the system with flexible and/or rigid couplings and allow the pipe to move in directions desired, with the use of anchors and guides if so required. With this method, it is important to ensure that movement at branch connections, changes of direction, equipment hookup, etc., will not cause damage or harmful stresses.

(3) Design the system with flexible couplings utilizing the expansion/contraction capabilities of these products.

The following example illustrates this method:(6") Schedule 40 steel pipe, roll grooved,

45.7m (150') long, anchored at each end

(200°F)

(40°F)

(80°F)

Thermal MovementTech Data Sheets: G810, G820, G830

AnchorPosition

ExpansionJoint Fig. 7550

IntermediateGuides

AnchorPosition

IntermediateGuides

IntermediateGuides

FlexibleCouplings

Activation Force

Pipe Sizemm

Inches

Activation ForceN

Lbs.

42.4 1561 1

4 35

48.3 2001 1

2 45

60.3 3112 70

73.0 6452 1

2 100

76.1 48976,1mm 110

88.9 6453 145

114.3 10684 240

141.3 16685 375

165.1 2224165,1mm 500

168.3 23136 520

219.1 39148 880

273.0 607210 1365

323.9 851812 1915

www.grinnell.com


Pressure &

Design Data


Thermal MovementTech Data Sheets: G810, G820, G830

Directions to calculate the number of couplings required to compensate for the thermal expansion and contraction of pipe (by example):

(1) Thermal ContractionUtilize the Thermal Expansion Table. Allowance for the minimum installation temperature, in this case 26.6°C to 4.4°C (80°F to 40°F), is calculated as:

26.6°C = 15,5mm per 30,5m 4.4°C = 7,6mm per 30,5m Difference = 7,9mm per 30,5m For 45,7m of pipe = 7,9mm x 1.5 = 11,9mm per 45,7m

(80°F = 0.61" per 100' 40°F = 0.30" per 100' Difference = 0.31" per 100' For 150' of pipe = 0.31" x 1.5 = 0.47" per 150')

(2) Thermal ExpansionUtilize the Thermal Expansion Table. Allowance for the minimum installation temperature, in this case 26.6°C to 93.3°C (80°F to 200°F), is calculated as:

93.3°C = 38,6mm per 30,5m 26.6°C = 15,5mm per 30,5m Difference = 23,1mm per 30,5m For 45,7m of pipe = 23,1mm x 1.5 = 34,5mm per 45,7m

(200°F = 1.52" per 100' 80°F = 0.61" per 100' Difference = 0.91" per 100' For 150' of pipe = 0.91 x 1.5 = 1.36" per 150')

(3) Couplings RequiredAvailable linear movement for a 150mm (6") Figure 707 Flexible Coupling on roll grooved pipe = 2.4mm (0.094") per coupling.

Fully butted together for contraction only. Therefore the number of Figure 707 Flexible Couplings required:

(0.47" / 0.094" per coupling = 5.0)

(b) Fully gapped apart for expansion only. Therefore the number of Figure 707 Flexible Couplings required:

(1.36" / 0.094" per coupling = 14.47)

expansion

Thermal Expansion of Carbon Steel in millimeters/30.5 Meters (Inches/100 Feet)

Between 0°F (-18°C) and Indicated Temperature

TemperatureC°F°

Thermal Expansionmm/30.5m

Inches/100 Feet-40.0 -7.72-40 -0.30

-34.4 -5.79-30 -0.23

-28.9 -3.86-20 -0.15

-23.3 -1.93-10 -0.08

-17.8 0.000 0.00

-12.2 1.9310 0.08

-6.7 3.8620 0.15-1.1 5.7930 0.234.4 7.7240 0.30

10.0 9.6550 0.38

15.6 11.5860 0.46

21.1 13.5170 0.53

26.7 15.4480 0.61

32.2 17.3790 0.68

37.8 19.30100 0.7643.3 21.23110 0.8448.9 23.16120 0.9154.4 25.09130 0.9960.0 27.02140 1.0665.6 28.95150 1.1471.1 30.88160 1.2276.7 32.81170 1.2982.2 34.74180 1.3787.8 36.67190 1.4493.3 38.60200 1.5298.9 40.53210 1.60

104.4 42.46220 1.67

110.0 44.39230 1.75

Mean Coef. of thermal expansion = 0.00001139 mm/mm/°C Source: ASME B31.9



Pressure &

Design Data

251

R =

L = (2) (R)

N =

L

2

2

T

R = Radius of curve

L = Pipe length

= Deflection from centre line, in degrees, for each coupling (see table)

N = Number of flexible couplings needed

T = Total deflection, in degrees, required

GRINNELL Flexible Couplings provide for restrained joints and allow for deflection to aid where the pipe or equipment is misaligned.

Note that flexible couplings will not accommodate both full maximum linear movement and the maximum available angular deflection concurrently at the same joint. Design Deflection for

Roll Grooved Pipe

If it is desired to have both deflection and linear movement available, then the system should have sufficient flexible joints to accommodate the requirement.

Flexible couplings are also useful in laying out curved piping systems.

Misalignment and DeflectionTech Data Sheets: G810, G820, G830

Deflection O (Roll Grooved Pipe)

Pipe Sizemm

Inches

Figures705 & 707

42.41.08°

1 14

48.30.94°

1 12

60.30.75°

2

73.00.62°

2 12

76.10.60°

76,1mm

88.90.51°

3

114.31.19°

4

141.30.97°

5

165.10.83°

165,1mm

168.30.81°

6

219.10.63°

8

273.00.50°

10

323.90.42°

12

Incorporates the recommended safety factor reduction for field practices (50% for sizes 32mm - 80mm (1 1⁄4" – 3" ) and 25% for sizes 100mm - 300mm (4" – 12" )).

www.grinnell.com


Pressure &

Design Data


All piping systems require that the support system accommodate the weight of the pipe, joint connections, fluid, and other system components. In addition, consideration may be necessary in reducing stresses, accommodating thermal expansion or contraction, building settlement, seismic movement, etc. The following tables provide guidelines for grooved steel piping products without concentrated loads between supports.

Flexible JointsFor pipe runs when linear movement is accommodated by the flexible coupling:

For pipe runs when linear movement is not required:

Rigid JointsFor pipe runs with rigid couplings:

Pipe SupportTech Data Sheets: G810, G820, G830

Number of Hangers Per Pipe Length

Pipe Sizemm

Inches

Pipe Length in Meters Feet

10 12 15 22 25 30 35 403.3 3.7 4.6 6.7 7.6 9.1 10.7 12.2

Average Number of Hangers Per Pipe Length

42.4 – 60.32 2 2 3 4 4 5 6

1 14 - 2

73.0 – 114.31 2 2 2 2 3 4 4

2 12 - 4

141.3 – 609.61 1 2 2 2 3 3 3

5 - 24

Distance Between Supports

Nominal Sizemm

Inches

Maximum Distance Between Supports

MetersFeet

42.4 - 48.3 3.71 1

4 - 1 12 12

60.3 - 219.1 4.62 - 8 15

273.0 - 323.9 4.9

10 - 12 16

355.6 - 406.4 5.514 - 16 18

457.2 - 609.6 6.118 - 24 20

Note: The requirements of ANSI, ASME or other code groups may require additional supports.

Pipe SizeSuggested Maximum Span

Between Supports – Meters Feet

Nominal DNIn.

O.D.mmIn.

Water Service Air Service

I II III I II III

25 33.4 2.1 2.7 3.7 2.7 9 3.71 1.315 7 9 12 9 2.7 12

32 42.4 2.1 3.4 3.7 2.7 11 3.71 1

4 1.660 7 11 12 9 3.4 12

40 48.3 2.1 3.7 4.6 2.7 13 4.61 1

2 1.900 7 12 15 9 4.0 15

50 60.3 3.0 4.0 4.6 4.0 15 4.62 2.375 10 13 15 13 4.6 15

65 73.0 3.4 4.3 4.6 4.3 16 4.62 1

2 2.875 11 14 15 14 4.9 15

65 76.1 3.4 4.3 4.6 4.3 16 4.676.1mm 3.000 11 14 15 14 4.9 15

80 88.9 3.7 4.6 4.6 4.6 17 4.63 3.500 12 15 15 15 5.2 15

100 114.3 4.3 5.2 4.6 5.2 21 4.64 4.500 14 17 15 17 6.4 15

125 133.0 4.9 5.8 4.6 6.1 24 4.6133.0mm 5.236 16 19 15 20 7.3 15

125 139.7 4.6 5.5 4.6 5.2 23 4.6139.7mm 5.500 15 18 15 19 7 15

125 141.3 4.9 5.8 4.6 6.1 24 4.65 5.563 16 19 15 20 7.3 15

150 165.1 5.2 6.1 4.6 6.4 25 4.6165.1mm 6.500 17 20 15 21 7.6 15

150 168.3 5.2 6.1 4.6 6.4 25 4.66 6.625 17 20 15 21 7.6 15

200 219.1 5.8 6.4 4.6 7.3 28 4.68 8.625 19 21 15 24 8.5 15

250 273.0 5.8 6.4 4.6 7.3 31 4.610 10.750 19 21 15 24 9.4 15

300 323.9 7 6.4 4.6 9.1 33 4.612 12.750 23 21 15 30 10.1 15

350 355.6 7 6.4 4.6 9.1 33 4.614 14.000 23 21 15 30 10.1 15

400 406.4 8.2 6.4 4.6 10.7 33 4.616 16.000 27 21 15 35 10.1 15

450 457.2 8.2 6.4 4.6 10.7 33 4.618 18.000 27 21 15 35 10.1 15

500 508.0 9.1 6.4 4.6 11.9 33 4.620 20.000 30 21 15 39 10.1 15

600 609.6 9.8 6.4 4.6 12.8 33 4.624 24.000 32 21 15 42 10.1 15

I - Spacing by ANSI B31.1 Power Piping CodeII - Spacing by ANSI B39.1 Building Piping CodeIII - Spacing by NFPA 13 Sprinkler Systems

(Steel Pipe except Threaded Lightwall)



Pressure &

Design Data

253


Rotational MovementGRINNELL Flexible Couplings are suitable for use in seismic as well as mining applications. The inherent capability of the flexible coupling to allow for linear movement, angular deflection, and rotational movement make it an excellent choice for reducing stresses in a piping system and to increase pipe life in slurry applications.

For mining applications where the pipe needs to be rotated, the system should be depressurized. The pipe coupling bolts/nuts can be loosened, pipe rotated, the bolts/nuts re-tightened, and the system be put back in service.

Even distribution of pipe wear can be achieved with this method on the inner service of the pipe.

Note: Precautions are necessary to monitor pipe wall thickness to evaluate pressure capability of the pipe with reduced wall.

Linear MovementFlexible couplings are designed with the couplings keys engaging the pipe without gripping on the bottom of the groove while still providing for a restrained mechanical joint.

The inherent flexibility of the coupling must be considered when deciding on support arrangements for the piping system as movement can occur in more than one plane (linear movement, angular deflection, and rotational movement).

Upon system pressurization, each pipe end within the flexible couplings will expand to the maximum published value. The coupling keys make contact with the face of the groove and restrain the joint. In piping systems, this movement will be accumulative.

www.grinnell.com


Pressure &

Design Data


Angular MovementSystem movement can be accommodated by providing for sufficient offset lengths. Temperature increases/decreases can further increase this movement.

When systems are anchored with partially deflected joints, the system can move to the fully deflected condition upon pressurization resulting in the “snaking” of the piping system. Lightweight hangers may not be suitable to prevent the lateral motion.

Pipe SupportPipe hanger positioning is important when considering pipe “sagging” due to the flexible nature of the piping system. Proper positioning of hangers near the elbow, for example, should be considered.

The use of spring hangers or other methods can be considered to accommodate vibrations. Base supports, pressure thrust anchors, and pipe offsets can be used to direct pipe movement.

The use of rigid couplings can be considered to reduce the movement available with flexible couplings. Consideration of other methods of accommodation of pipe movements may be required.




Pressure &

Design Data

255

Vertical PipingTech Data Sheets: G810, G820, G830

Risers comprised of rigid couplings can be considered instead of welded or flanged systems. Where thermal movement exists, expansion joints and/or flexible couplings with offsets may be required.

When using flexible couplings, the movement that occurs in long lengths of piping needs to be considered. Each joint can move up to the maximum pipe end separation published. This movement can accumulate and result in the growth of the piping system, for example at the top. Offsets may be necessary.

Should the riser contain branch connections, the movement which occurs at these locations with flexible couplings will also need to be considered.

One solution would be to anchor the vertical piping at appropriate locations to prevent movement which can cause stresses at the branches or equipment. The use of rigid couplings can be an advantage.

As always, good piping practice should prevail. It is the designer’s responsibility to select products suitable for the intended service and to ensure that pressure ratings and performance data is not exceeded. Never remove any piping component or correct or modify any piping deficiencies without first depressurizing and draining the system. Material and gasket selection should be verified to be compatible for the specific application.

www.grinnell.com


Pressure &

Design Data


Pipe SizeConversion Table

Wall Thickness - mm inches

Nominal DNIn.

O.D.mmIn.

Pipe ANSI B36.10 Pipe DIN Norm

Sch. 5 Sch. 10 Sch. 20 Sch. 30 Sch. 40 Sch. 80 DIN 2440 DIN 2448 DIN 2458

20 26.9 1.65 2.77 – – 2.87 3.91 2.65 2.3 2 3

4 1.050 0.06 0.11 – – 0.11 0.15 0.10 0.09 0.08

25 33.4 1.65 2.77 – – 3.38 4.55 3.25 2.6 21 1.315 0.06 0.11 – – 0.13 0.18 0.13 0.10 0.08

32 42.4 1.65 2.77 – – 3.56 4.83 3.25 2.6 2.31 1

4 1.660 0.06 0.11 – – 0.14 0.19 0.13 0.10 0.09

40 48.3 1.65 2.77 – – 3.68 5.08 3.25 2.6 2.31 1

2 1.900 0.06 0.11 – – 0.14 0.20 0.13 0.10 0.09

50 60.3 1.65 2.77 – – 3.91 5.54 3.65 2.9 2.62 2.375 0.06 0.11 – – 0.15 0.22 0.14 0.11 0.10

65 73.0 2.11 3.05 – – 5.16 7.01 – – –2 1

2 2.875 0.08 0.12 – – 0.20 0.28 – – –

65 76.1 – – – – – – 3.65 2.9 2.676.1mm 3.000 – – – – – – 0.14 0.11 0.10

80 88.9 2.11 3.05 5.49 7.61 4.05 3.2 2.93 3.500 0.08 0.12 0.22 0.30 0.16 0.13 0.11

100 108.0 – – – – – – – 3.6 2.9108.0mm 4.252 – – – – – – – 0.14 0.11

100 114.3 2.11 3.05 – – 6.02 8.56 4.5 3.6 3.24 4.500 0.08 0.12 – – 0.24 0.34 0.18 0.14 0.13

125 133.0 – – – – – – – 4 3.6133.0mm 5.236 – – – – – – – 0.16 0.14

125 139.7 – – – – – – 4.85 – –139.7mm 5.500 – – – – – – 0.19 – –

125 141.3 2.77 3.4 – – 6.55 9.53 – – –5 5.563 0.11 0.13 – – 0.26 0.38 – – –

150 159.0 – – – – – – – 4.5 4159.0mm 6.260 – – – – – – – 0.18 0.16

150 165.1 – – – – – – 4.85 4.5 4165.1mm 6.500 – – – – – – 0.19 0.18 0.16

150 168.3 2.77 3.4 – – 7.11 10.97 – – 4.56 6.625 0.11 0.13 – – 0.28 0.43 – – 0.18

200 219.1 2.77 3.76 6.35 7.04 8.18 12.7 – 6.3 4.58 8.625 0.11 0.15 0.25 0.28 0.32 0.50 – 0.25 0.18

250 273.0 3.4 4.19 6.35 7.8 9.27 15.06 – 6.3 510 10.750 0.13 0.16 0.25 0.31 0.36 0.59 – 0.25 0.20

300 323.9 3.96 4.57 6.35 8.38 10.31 17.45 – 7.1 5.612 12.750 0.16 0.18 0.25 0.33 0.41 0.69 – 0.28 0.22

350 355.6 4.19 6.35 7.94 9.53 11.1 19.05 – 8 5.614 14.000 0.16 0.25 0.31 0.38 0.44 0.75 – 0.31 0.22

400 406.4 – 6.35 7.94 9.53 12.7 21.41 – 8.8 6.316 16.000 – 0.25 0.31 0.38 0.50 0.84 – 0.35 0.25

450 457.2 – 6.35 7.94 11.13 14.28 23.8 – 10 6.318 18.000 – 0.25 0.31 0.44 0.56 0.94 – 0.39 0.25

500 508.0 – 6.35 9.53 12.7 15.06 26.19 – 11 6.320 20.000 – 0.25 0.38 0.50 0.59 1.03 – 0.43 0.25

600 609.6 – 6.35 9.53 14.28 17.45 30.94 – 12.5 6.324 24.000 – 0.25 0.38 0.56 0.69 1.22 – 0.49 0.25

Pipe Data



Pressure &

Design Data

257

Working Pressure Ratings Bar (psi) onISO Size Steel Pipe

(Page 1 of 3)

Pipe Size NominalWall

Thicknessmm Inches

GRINNELL Coupling Working Pressure Ratings (Bar psi) on Roll Grooved ISO Size Steel Pipe

mmInches O.D. Fig. 705

FlexibleFig. 707 Flexible

Fig. 740 Rigid

Fig. 772 Rigid

Fig. 770 Rigid

Fig. 774 Rigid

Fig. 716 Reducing

Fig. 71 Flange

25 1

33.71.315

1.8 20.7 51.7 – – – 20.7 – –0.071 300 750 – – – 300 – –

2.9 34.5 51.7 – – – 34.5 – –0.114 500 750 – – – 500 – –

3.2 34.5 69.0 – – – 34.5 – –0.126 500 1001 – – – 500 – –

32 1 1 4

42.41.660

1.8 20.7 51.7 – 51.7 – 20.7 – –0.071 300 750 – 750 – 300 – –

2.9 34.5 51.7 – 51.7 – 34.5 – –0.114 500 750 – 750 – 500 – –

3.6 34.5 69.0 – 51.7 – 34.5 – –0.142 500 1001 – 750 – 500 – –

40 1 1 2

48.31.900

1.8 34.5 34.5 – 34.5 – 34.5 – –0.071 500 500 – 500 – 500 – –

2.9 34.5 51.7 – 51.7 – 34.5 – –0.114 500 750 – 750 – 500 – –

3.6 34.5 69.0 – 51.7 – 34.5 – –0.142 500 1001 – 750 – 500 – –

50 2

60.32.375

1.8 34.5 34.5 – 34.5 34.5 34.5 24.1 13.80.071 500 500 – 500 500 500 350 200

2.9 34.5 51.7 41.4 51.7 51.7 34.5 24.1 17.20.114 500 750 600 750 750 500 350 249

3.6 34.5 69.0 51.7 51.7 69.0 34.5 34.5 20.70.142 500 1001 750 750 1001 500 500 300

65 2 1 2

73.02.875

2.0 34.5 34.5 – 34.5 34.5 34.5 24.1 13.80.079 500 500 – 500 500 500 350 200

3.2 34.5 41.3 41.4 41.3 41.3 34.5 24.1 17.20.126 500 599 600 599 500 350 249

5.0 34.5 69.0 51.7 51.7 69.0 34.5 34.5 20.70.197 500 1001 750 750 1001 500 500 300

65 76.1mm

76.13.000

2.0 34.5 34.5 – 34.5 – 34.5 24.1 13.80.079 500 500 – 500 – 500 350 200

3.2 34.5 41.3 – 41.3 – 34.5 24.1 17.20.126 500 599 – 599 – 500 350 249

5.0 34.5 69.0 – 51.7 – 34.5 34.5 20.70.197 500 1001 – 750 – 500 500 300

80 3

88.93.500

2.0 34.5 34.5 – 34.5 34.5 34.5 24.1 13.80.079 500 500 – 500 500 500 350 200

3.2 34.5 41.3 41.4 41.3 41.3 34.5 24.1 17.20.126 500 599 600 599 599 500 350 249

5.6 34.5 69.0 51.7 51.7 69.0 34.5 34.5 20.70.220 500 1001 750 750 1001 500 500 300

100 108.0mm

108.04.252

2.0 27.6 – – – – – – –0.079 400 – – – – – – –

3.2 34.5 – – – – – – –0.126 500 – – – – – – –

5.6 34.5 – – – – – – –0.220 500 – – – – – – –

www.grinnell.com


Pressure &

Design Data


Working Pressure Ratings Bar (psi) onISO Size Steel Pipe(Page 2 of 3)


Thicknessmm Inches




Fig. 740 Rigid

Fig. 772 Rigid

Fig. 770 Rigid

Fig. 774 Rigid

Fig. 716 Reducing

Fig. 71 Flange

100 4

114.34.500

2.0 27.6 27.6 – 27.6 27.6 27.6 24.1 13.80.079 400 400 – 400 400 400 350 200

3.2 34.5 41.3 34.5 41.3 41.3 34.5 24.1 17.20.126 500 599 500 599 599 500 350 249

5.6 34.5 69.0 51.7 51.7 69.0 34.5 34.5 20.70.220 300 300 300 300 300 300 300 300

125 133.0mm

133.05.236

2.9 24.1 – – – – – – –0.114 300 – – – – – – –

3.6 31.0 – – – – – – –0.142 300 – – – – – – –

6.3 31.0 – – – – – – –0.248 300 – – – – – – –

125 139.7mm

139.75.500

2.9 24.1 24.1 – 24.1 – 24.1 – 13.80.114 300 300 – 300 – 300 – 300

3.6 31.0 34.5 – 31.0 – 31.0 – 17.20.142 300 300 – 300 – 300 – 300

6.3 31.0 69.0 – 51.7 – 31.0 – 20.70.248 300 300 – 300 – 300 – 300

1255

141.35.563

2.9 24.1 24.1 – 24.1 – 24.1 24.1 13.80.114 300 300 – 300 – 300 300 300

3.6 31.0 34.5 34.5 31.0 – 31.0 24.1 17.20.142 300 300 300 300 – 300 300 300

6.3 31.0 69.0 51.7 51.7 – 31.0 34.5 20.70.248 300 300 300 300 – 300 300 300

150 159.0mm

159.06.260

2.9 24.1 – – – – – – –0.114 300 – – – – – – –

3.6 31.0 – – – – – – –0.142 300 – – – – – – –

7.1 31.0 – – – – – – –0.280 300 – – – – – – –

150 165.1mm

165.16.500

2.9 24.1 24.1 – 24.1 – 24.1 24.1 13.80.114 300 300 – 300 – 300 300 300

3.6 31.0 31.0 – 34.5 – 31.0 24.1 17.20.142 300 300 – 300 – 300 300 300

7.1 31.0 69.0 – 48.2 – 31.0 27.6 20.70.280 300 300 – 300 – 300 300 300

150 6

168.36.625

2.9 24.1 24.1 – 24.1 24.1 24.1 24.1 13.80.114 300 300 – 300 300 300 300 300

3.6 31.0 31.0 34.5 34.5 34.5 31.0 24.1 17.20.142 300 300 300 300 300 300 300 300

7.1 31.0 69.0 48.3 48.2 69.0 31.0 27.6 20.70.280 300 300 300 300 300 300 300 300

200 8

219.18.625

2.9 17.2 17.2 – 17.2 17.2 17.2 13.8 13.80.114 300 300 – 300 300 300 300 300

5.0 20.7 20.7 20.7 20.7 20.7 20.7 20.7 13.80.197 300 300 300 300 300 300 300 300

8.0 31.0 55.1 41.4 41.3 55.1 31.0 27.6 20.70.315 300 300 300 300 300 300 300 300



Pressure &

Design Data

259

Working Pressure Ratings Bar (psi) onISO Size Steel Pipe

(Page 3 of 3)


Thicknessmm Inches




Fig. 740 Rigid

Fig. 772 Rigid

Fig. 770 Rigid

Fig. 774 Rigid

Fig. 716 Reducing

Fig. 71 Flange

250 10

273.010.750

3.6 20.7 17.2 – 17.2 17.2 20.7 – 13.80.142 300 300 – 300 300 300 – 300

5.0 24.1 20.7 – 20.7 20.7 24.1 – 13.80.197 300 300 – 300 300 300 – 300

8.0 24.1 34.5 – 27.6 55.1 24.1 – 17.20.315 300 300 – 300 300 300 – 300

300 12

323.912.750

4.0 13.8 13.8 – 13.8 13.8 13.8 – 13.80.157 300 300 – 300 300 300 – 300

5.0 20.7 20.7 – 13.8 13.8 20.7 – 13.80.197 300 300 – 300 300 300 – 300

8.0 24.1 34.5 – 27.6 55.1 24.1 – 17.20.315 300 300 – 300 300 300 – 300

350 14

355.614.000

4.0 – 8.6 – 8.6 – – – 8.60.157 – 300 – 300 – – – 300

6.3 – 17.2 – 24.1 – – – 13.80.248 – 300 – 300 – – – 300

8.8 – 20.7 – 24.1 – – – 13.80.346 – 300 – 300 – – – 300

9.5 – 24.1 – 24.1 – – – 20.70.374 – 300 – 300 – – – 300

400 16

406.416.000

4.0 – 6.9 – 6.9 – – – 6.90.157 – 300 – 300 – – – 300

6.3 – 20.7 – 24.1 – – – 13.80.248 – 300 – 300 – – – 300

8.8 – 20.7 – 24.1 – – – 13.80.346 – 300 – 300 – – – 300

9.5 – 24.1 – 24.1 – – – 20.70.374 – 300 – 300 – – – 300

450 18

457.218.000

5.0 – 6.9 – 24.1 – – – 13.80.197 – 300 – 300 – – – 300

6.3 – 15.5 – 24.1 – – – 13.80.248 – 300 – 300 – – – 300

8.8 – 20.7 – 24.1 – – – 20.70.346 – 300 – 300 – – – 300

50020

508.020.000

5.0 – 3.4 – 3.4 – – – 3.40.197 – 300 – 300 – – – 300

6.3 – 6.9 – 13.8 – – – 6.90.248 – 300 – 300 – – – 300

8.8 – 20.7 – 24.1 – – – 20.70.346 – 300 – 300 – – – 300

60024

609.624.000

5.0 – 1.7 – 1.7 – – – 1.70.197 – 300 – 300 – – – 300

6.3 – 5.2 – 13.8 – – – 6.90.248 – 300 – 300 – – – 300

8.8 – 17.2 – 24.1 – – – 17.20.346 – 300 – 300 – – – 300

www.grinnell.com


Pressure &

Design Data


Pipe SizePipe

Schedule

NominalWall

Thicknessmm Inches

GRINNELL Coupling Working Pressure Ratings (Bar PSI) on Light Wall Roll Grooved Steel Pipe


FlexibleFig. 774

RigidFig. 707 Flexible

Fig. 772 Rigid

Fig. 716 Reducing

Fig. 71 Flange

25 1

33.71.315

51.7 – 20.7 – – – –

0.065 – 300 – – – –

102.8 – 20.7 – – – –

0.109 – 300 – – – –

32 1 1 4

42.41.660

51.7 20.7 20.7 – 51.7 – –

0.065 300 300 – 750 – –

102.8 34.5 20.7 – 51.7 – –

0.109 500 300 – 750 – –

40 1 1 2

48.31.900

51.7 34.5 20.7 34.5 34.5 24.1 –

0.065 500 300 500 500 350 –

102.8 34.5 20.7 51.7 51.7 24.1 –

0.109 500 300 750 750 350 –

50 2

60.32.375

51.7 34.5 20.7 34.5 34.5 24.1 13.8

0.065 500 300 500 500 350 200

102.8 34.5 20.7 51.7 51.7 24.1 17.2

0.109 500 300 750 750 350 250

65 2 1

2

73.02.875

52.1 34.5 20.7 34.5 34.5 24.1 13.8

0.083 500 300 500 500 350 200

103.0 34.5 20.7 41.4 41.4 24.1 17.20.12 500 300 600 600 350 250

80 3

88.93.500

52.1 34.5 20.7 34.5 34.5 24.1 13.8

0.083 500 300 500 500 350 200

103.0 34.5 20.7 41.4 41.4 24.1 17.20.12 500 300 600 600 350 250

100 4

114.34.500

52.1 27.6 20.7 27.6 27.6 24.1 13.8

0.083 400 300 400 400 350 200

103.0 34.5 20.7 41.4 41.4 24.1 17.20.12 500 300 600 600 350 250

1255

141.35.563

52.8 24.1 20.7 24.1 24.1 24.1 13.8

0.109 350 300 350 350 350 200

103.4 31.0 20.7 34.5 31.0 24.1 17.2

0.134 450 300 500 450 350 250

150 6

168.36.625

52.8 24.1 20.7 24.1 24.1 – 13.8

0.109 350 300 350 350 – 200

103.4 31.0 20.7 31.0 34.5 – 17.2

0.134 450 300 450 500 – 250

200 8

219.18.625

52.8 17.2 17.2 17.2 17.2 – 13.8

0.109 250 250 250 250 – 200

103.8 20.7 20.7 20.7 20.7 – 13.8

0.148 300 300 300 300 – 200

Working Pressure Ratings Bar (psi) onLight Wall Roll Grooved Steel Pipe(Page 1 of 2)



Pressure &

Design Data

261

Pipe SizePipe

Schedule

NominalWall

Thicknessmm Inches

GRINNELL Coupling Working Pressure Ratings (Bar PSI) on Light Wall Roll Grooved Steel Pipe


FlexibleFig. 774

RigidFig. 707 Flexible

Fig. 772 Rigid

Fig. 716 Reducing

Fig. 71 Flange

250 10

273.010.750

53.4 20.7 – 17.2 17.2 – 13.8

0.134 300 – 250 250 – 200

104.2 24.1 – 20.7 20.7 – 13.8

0.165 350 – 300 300 – 200

300 12

323.912.750

54.0 20.7 – 13.8 13.8 – 13.8

0.156 300 – 200 200 – 200

104.6 24.1 – 20.7 13.8 – 13.80.18 350 – 300 200 – 200

350 14

355.614.000

54.0 – – 8.6 – – –

0.156 – – 125 – – –

106.4 – – 17.2 – – –

0.25 – – 250 – – –

207.9 – – 19.0 – – –

0.312 – – 275 – – –

400 16

406.416.000

54.2 – – 6.9 – – –

0.165 – – 100 – – –

106.4 – – 12.1 – – –

0.25 – – 175 – – –

207.9 – – 19.0 – – –

0.312 – – 275 – – –

450 18

457.218.000

106.4 – – 6.9 – – –

0.25 – – 100 – – –

207.9 – – 12.1 – – –

0.312 – – 175 – – –

50020

508.020.000

106.4 – – 6.9 – – –

0.25 – – 100 – – –

20 (Std.)9.5 – – 20.7 – – –

0.375 – – 300 – – –

60024

609.624.000

106.4 – – 5.2 – – –

0.25 – – 75 – – –

20 (Std.)9.5 – – 17.2 – – –

0.375 – – 250 – – –

Working Pressure Ratings Bar (psi) onLight Wall Roll Grooved Steel Pipe

(Page 2 of 2)

www.grinnell.com


Pressure &

Design Data


Maximum Pressure Ratings Bar (psi) onANSI 304/316 Stainless Steel(Page 1 of 2)

Pipe SizePipe

Schedule

WallThickness

mmIn.

Maximum Pressure Ratings (Bar psi) on ANSI 304/316 Stainless Steel

Nominal DNIn.

O.D.mmIn.

Figure 705

Figure 774

Figure 707

Figure 772

Figure 405

Figure 472

Figure 770

Figure 71

25 1

33.71.315

51.7 24.1 20.7 27.6 – 24.1 – – –

0.065 350 300 400 – 350 – – –

102.8 34.5 20.7 34.5 – 34.5 – – –

0.109 500 300 500 – 500 – – –

403.4 51.7 20.7 51.7 – 51.7 – – –

0.133 750 300 750 – 750 – – –

32 1 1

4

42.41.660

51.7 22.4 20.7 27.6 27.6 24.1 24.1 – –

0.065 325 300 400 400 350 350 – –

102.8 34.5 20.7 34.5 51.7 34.5 34.5 – –

0.109 500 300 500 750 500 500 – –

403.6 51.7 20.7 51.7 51.7 51.7 51.7 – –

0.140 750 300 750 750 750 750 – –

40 1 1

2

48.31.900

51.7 22.4 20.7 27.6 27.6 24.1 24.1 – –

0.065 325 300 400 400 350 350 – –

102.8 34.5 20.7 34.5 51.7 34.5 34.5 – –

0.109 500 300 500 750 500 500 – –

403.7 44.8 20.7 51.7 51.7 51.7 51.7 – –

0.145 650 300 750 750 750 750 – –

50 2

60.32.375

51.7 17.2 17.2 22.4 24.1 24.1 24.1 24.1 12.1

0.065 250 250 325 350 350 350 350 175

102.8 34.5 20.7 34.5 48.3 34.5 34.5 51.7 19.0

0.109 500 300 500 700 500 500 750 275

403.9 34.5 20.7 51.7 51.7 34.5 41.4 51.7 19.0

0.154 500 300 750 750 500 600 750 275

65 2 1

2

73.02.875

52.1 17.2 17.2 22.4 24.1 24.1 24.1 24.1 12.1

0.083 250 250 325 350 350 350 350 175

103.0 34.5 20.7 34.5 48.3 34.5 34.5 51.7 19.0

0.120 500 300 500 700 500 500 750 275

405.2 34.5 20.7 51.7 51.7 34.5 41.4 51.7 19.0

0.203 500 300 750 750 500 600 750 275

80 3

88.93.500

52.1 17.2 17.2 22.4 24.1 24.1 24.1 24.1 12.1

0.083 250 250 325 350 350 350 350 175

103.0 27.6 20.7 34.5 34.5 34.5 34.5 51.7 19.0

0.120 400 300 500 500 500 500 750 275

405.5 34.5 20.7 51.7 51.7 34.5 41.4 51.7 19.0

0.216 500 300 750 750 500 600 750 275

100 4

114.34.500

52.1 13.8 13.8 17.2 20.7 20.7 20.7 20.7 12.1

0.083 200 200 250 300 300 300 300 175

103.0 27.6 20.7 34.5 34.5 27.6 27.6 51.7 19.0

0.120 400 300 500 500 400 400 750 275

406.0 34.5 20.7 51.7 51.7 34.5 41.4 51.7 19.0

0.237 500 300 750 750 500 600 750 275



Pressure &

Design Data

263

Pipe SizePipe

Schedule

WallThickness

mmIn.

Maximum Pressure Ratings (Bar psi) on ANSI 304/316 Stainless Steel

Nominal DNIn.

O.D.mmIn.

Figure 705

Figure 774

Figure 707

Figure 772

Figure 405

Figure 472

Figure 770

Figure 71

1255

141.35.563

52.8 8.6 8.6 13.8 17.2 17.2 17.2 17.2 8.6

0.109 125 125 200 250 250 250 250 125

103.4 24.1 20.7 34.5 34.5 24.1 24.1 24.1 13.8

0.134 350 300 500 500 350 350 350 200

406.6 31.0 20.7 44.8 44.8 31.0 41.4 51.7 17.2

0.258 450 300 650 650 450 600 750 250

150 6

168.36.625

52.8 5.2 5.2 8.6 17.2 17.2 17.2 17.2 5.2

0.109 75 75 125 250 250 250 250 75

103.4 13.8 13.8 20.7 20.7 17.2 20.7 24.1 8.6

0.134 200 200 300 300 250 300 350 125

407.1 20.7 20.7 34.5 31.0 31.0 41.4 51.7 10.3

0.280 300 300 500 450 450 600 750 150

200 8

219.18.625

52.8 3.4 3.4 5.2 6.9 6.9 6.9 6.9 3.4

0.109 50 50 75 100 100 100 100 50

103.8 13.8 13.8 20.7 20.7 13.8 20.7 24.1 5.2

0.148 200 200 300 300 200 300 350 75

408.2 20.7 20.7 27.6 31.0 31.0 41.4 44.8 8.6

0.322 300 300 400 450 450 600 650 125

250 10

273.010.750

53.4 N/R N/R N/R N/R – N/R N/R N/R

0.134 N/R N/R N/R N/R – N/R N/R N/R

104.2 5.2 5.2 8.6 20.7 – 20.7 20.7 5.2

0.165 75 75 125 300 – 300 300 75

409.3 5.2 5.2 22.4 31.0 – 41.4 41.4 8.6

0.365 75 75 325 450 – 600 600 125

300 12

323.912.750

54.0 N/R N/R N/R 10.3 – 10.3 20.7 N/R

0.156 N/R NR N/R 150 – 150 300 N/R

104.6 3.4 5.2 8.6 10.3 – 10.3 17.2 3.4

0.180 50 75 125 150 – 150 250 50

409.5 3.4 5.2 17.2 27.6 – 41.4 41.4 8.6

0.375 50 75 250 400 – 600 600 125

Maximum Pressure Ratings Bar (psi) onANSI 304/316 Stainless Steel

(Page 2 of 2)

www.grinnell.com


Pressure &

Design Data


Pipe Size Pipe Thickness

Wallmm

Maximum Pressure Ratings (Bar psi) on ISO 304/316 Stainless Steel

Nominal DNIn.

O.D.mmIn.

Figure 705

Figure 774

Figure 707

Figure 772

Figure 405

Figure 472

Figure 770

Figure 71

25 1

33.71.315

2.0 24 21 28 – 24 – – –0.079 350 300 400 – 350 – – –

2.8 34 21 34 – 34 – – –0.110 500 300 500 – 500 – – –

3.4 52 21 52 – 52 – – –0.134 750 300 750 – 750 – – –

32 1 1 4

42.41.660

2.0 22 21 28 28 24 24 – –0.079 325 300 400 400 350 350 – –

2.8 34 21 34 52 34 34 – –0.110 500 300 500 750 500 500 – –

3.6 52 21 52 52 52 52 – –0.142 750 300 750 750 750 750 – –

40 1 1 2

48.31.900

2.0 22 21 28 28 24 24 – –0.079 325 300 400 400 350 350 – –

2.8 34 21 34 52 34 34 – –0.110 500 300 500 750 500 500 – –

3.7 45 21 52 52 52 52 – –0.146 650 300 750 750 750 750 – –

50 2

60.32.375

2.0 17 17 22 24 24 24 24 120.079 250 250 325 350 350 350 350 175

2.8 34 21 34 48 34 34 52 190.110 500 300 500 700 500 500 750 275

3.9 34 21 52 52 34 41 52 190.154 500 300 750 750 500 600 750 275

65 2 1 2

73.02.875

2.0 17 17 22 24 24 24 24 120.079 250 250 325 350 350 350 350 175

3.0 34 21 34 48 34 34 52 190.118 500 300 500 700 500 500 750 275

5.2 34 21 52 52 34 41 52 190.205 500 300 750 750 500 600 750 275

65 76.1mm

76.13.000

2.0 17 17 22 24 24 24 – 120.079 250 250 325 350 350 350 – 175

3.0 28 21 34 34 34 34 – 190.118 400 300 500 500 500 500 – 275

5.2 34 21 52 52 34 41 – 190.205 500 300 750 750 500 600 – 275

80 3

88.93.500

2.0 17 17 22 24 24 24 24 120.079 250 250 325 350 350 350 350 175

3.0 28 21 34 34 34 34 52 190.118 400 300 500 500 500 500 750 275

5.5 34 21 52 52 34 41 52 190.217 500 300 750 750 500 600 750 275

100 4

114.34.500

2.0 14 14 17 21 21 21 21 120.079 200 200 250 300 300 300 300 175

3.0 28 21 34 34 28 28 52 190.118 400 300 500 500 400 400 750 275

6.0 34 21 52 52 34 41 52 190.236 500 300 750 750 500 600 750 275

Maximum Pressure Ratings Bar (psi) onISO 304/316 Stainless Steel(Page 1 of 2)



Pressure &

Design Data

265

Pipe Size Pipe Thickness

Wallmm

Maximum Pressure Ratings (Bar psi) on ISO 304/316 Stainless Steel

Nominal DNIn.

O.D.mmIn.

Figure 705

Figure 774

Figure 707

Figure 772

Figure 405

Figure 472

Figure 770

Figure 71

125 139.7mm

139.75.500

2.8 9 9 14 17 17 17 – 90.110 125 125 200 250 250 250 – 125

3.4 24 21 34 34 24 24 – 140.134 350 300 500 500 350 350 – 200

6.4 31 21 45 45 31 41 – 170.252 450 300 650 650 450 600 – 250

1255

141.35.563

2.8 9 9 14 17 17 17 17 90.110 125 125 200 250 250 250 250 125

3.4 24 21 34 34 24 24 24 140.134 350 300 500 500 350 350 350 200

6.6 31 21 45 45 31 41 52 170.260 450 300 650 650 450 600 750 250

150 165.1mm

165.16.500

2.8 5 5 9 17 17 17 – 50.110 75 75 125 250 250 250 – 75

3.4 14 14 21 21 17 21 – 90.134 200 200 300 300 250 300 – 125

7.1 21 21 34 31 31 41 – 100.280 300 300 500 450 450 600 – 150

150 6

168.36.625

2.8 5 5 9 17 17 17 17 50.110 75 75 125 250 250 250 250 75

3.4 14 14 21 21 17 21 24 90.134 200 200 300 300 250 300 350 125

7.1 21 21 34 31 31 41 52 100.280 300 300 500 450 450 600 750 150

200 8

219.18.625

2.8 3 3 5 7 7 7 7 30.110 50 50 75 100 100 100 100 50

3.8 14 14 21 21 14 21 24 50.150 200 200 300 300 200 300 350 75

8.2 21 21 28 31 31 41 45 90.323 300 300 400 450 450 600 650 125

250 10

273.010.750

3.4 N/R N/R N/R N/R – N/R N/R N/R0.134 N/R N/R N/R N/R – N/R N/R N/R

4.2 5 5 9 21 – 21 21 50.165 75 75 125 300 – 300 300 75

9.3 5 5 22 31 – 41 41 90.366 75 75 325 450 – 600 600 125

300 12

323.912.750

4.0 N/R N/R N/R 10 – 10 21 NR0.157 N/R N/R N/R 150 – 150 300

4.6 3 5 9 10 – 10 17 30.181 50 75 125 150 – 150 250 50

9.5 3 5 17 28 – 41 41 90.374 50 75 250 400 – 600 600 125

Maximum Pressure Ratings Bar (psi) onISO 304/316 Stainless Steel

(Page 2 of 2)

www.grinnell.com


Pressure &

Design Data


Global Pipe Size DesignationsGRINNELL Mechanical Products product data is utilized worldwide and all technical data is shown in both metric and imperial terms. The following chart shows a comparison between typical metric and IPS pipe sizes.

IMPORTANT NOTE: Nominal designations are used where the actual OD of the pipe matches the ANSI size. Otherwise both the nominal and actual OD are listed.

China sizes are listed as actual OD in mm. ** China sizes are tubing sizes.

Nominal Size (DN) Outside Diameter (OD)

Inches (Imperial)

mm (Metric)

mm (Specification

Reference)

DIN mm

BS mm

ISO mm

JIS mm

ANSI Inches

GB China mm

India

IS 1239 IS3589

12 15 21.3mm DN 15 DN 15 DN 15 21.7mm 1⁄ 2 DN 15 DN 15 –

34 20 26.7mm 26.9mm DN 20 DN 20 27.2mm 3⁄4 DN 20 DN 20 –

1 25 33.4mm 33.7mm DN 25 DN 25 34mm 1 DN 25 DN 25 –1 1

4 32 42.2mm 42.4mm DN 32 DN 32 42.7mm 1 1⁄4 DN 32 DN 32 –1 1

2 40 48.3mm DN 40 DN 40 DN 40 48.6mm 1 1⁄ 2 DN 40 DN 40 –2 50 60.3mm DN 50 DN 50 DN 50 60.5mm 2 DN 50 DN 50 –

2 12 65

73.1mm – – – – 2 1⁄ 2 – – –76.1mm BS/ISO 76.1mm 76.1mm 76.1mm 76.3mm – 76.1mm ** 76.1mm –

3 80 88.9mm DN 80 DN 80 DN 80 DN 80 3 DN 80 DN 80 –

3 12 90 101.6mm – – – – – – – –

4 100108mm China

(& old DIN) DIN 133mm – – – – 108mm ** – –

114.3mm DN 100 DN 100 DN 101 DN 100 4 DN 100 DN 100 –– 127mm 127mm – – – – – – – –

5 125133mm China – – – – – 133mm ** – –

139.7mm BS/ISO DN 125 139.7mm 139.7mm 139.8mm – 139.7mm 139.7mm –141.3mm – – – – 5 – – –

– 152.4mm 152.4mm – – – – – – – –

6 150159mm China – – – – – 159mm –

165.1mm JIS/BS – 165.1mm – 165.2mm – – 165.1mm –168.3mm DN 150 – DN 150 – 6 DN 150 – DN 150

– 175 193.7mm – – – – – – – 193.7mm– 203.2mm 203.2mm – – – – – – – –

8 200216.3mm JIS – – – 216.3mm – – – –

219.1mm DN 200 DN 200 DN 200 – 8 DN 200 DN 200 DN 200– 254mm 254mm – – – – – – – –

10 250267.4mm JIS – – – 267.4mm – – – –

273mm DN 250 DN 250 DN 250 – 10 DN 250 DN 250 DN 250– 304.8mm 304.8mm – – – – – – – –

12 300318.5mm JIS – – – 318.5mm – – – –

323.9mm DN 300 DN 300 DN 300 – 12 – – –

14 350355.6mm DN 350 DN 350 DN 350 DN 350 14 DN 350 – –

377mm China – – – – – 377mm – –

16 400406.4mm DN 400 DN 400 DN 400 DN 400 16 DN 400 – –

426mm China – – – – – 426mm – –

18 450457.2mm DN 450 DN 450 DN 450 DN 450 18 DN 450 – –

480mm China – – – – – 480mm – –

20 500508mm DN 500 DN 500 DN 500 DN 500 20 DN 500 – –

530mm China – – – – – 530mm – –

22 550558.8mm – – – DN 550 22 559mm – –

580mm China – – – – – 580mm – –

24 600610mm DN 600 DN 600 DN 600 DN 600 24 DN 600 – –

630mm China – – – – – 630mm – –



Pressure &

Design Data

267

Flange Drilling Specifications

“B” DimensionBolt Hole Diameter

“A” DimensionBolt Circle Diameter

Quantity “N”Number of Bolt Holes

Valve SizeANSI B16.1

(Class 125#) 1ISO 2084 (PN10) 2

ISO 2084 (PN16) 3

Dimensions - mm InchesNominal

mmInches

O.D.mm

InchesA B Qty.

N A B Qty. N A B Qty.

N

50 60.3 120.6 19.04

125.0 18.04

125.0 18.04

2 2.375 4.75 0.75 4.92 0.71 4.92 0.71

65 73.0 139.7 19.04

145.0 18.04

145.0 18.04

2 12 2.875 5.50 0.75 5.71 0.71 5.71 0.71

80 88.9 152.4 19.04

160.0 18.08

160.0 18.08

3 3.500 6.00 0.75 6.30 0.71 6.30 0.71

100 114.3 190.5 19.18

180.0 18.08

180.0 18.08

4 4.500 7.50 0.75 7.09 0.71 7.09 0.71

125 141.3 215.9 22.48

210.0 18.08

210.0 18.08

5 5.563 8.50 0.88 8.27 0.71 8.27 0.71

150 168.3 241.3 22.48

240.0 22.08

240.0 22.08

6 6.625 9.50 0.88 9.45 0.87 9.45 0.87

200 219.1 298.5 22.28

295.0 22.08

295.0 22.012

8 8.625 11.75 0.88 11.61 0.87 11.61 0.87

250 273.0 362.0 25.412

350.0 22.012

355.0 26.012

10 10.750 14.25 1.00 13.78 0.87 13.98 1.02

300 323.9 431.8 25.412

400.0 22.012

410.0 26.012

12 12.750 17.00 1.00 15.75 0.87 16.14 1.02

350 355.6 476.5 28.412

460.0 22.016

470.0 26.016

14 14.000 18.76 1.12 18.11 0.87 18.50 1.02

400 406.4 539.8 28.416

515.0 26.016

525.0 30.016

16 16.000 21.25 1.12 20.28 1.02 20.67 1.18

450 457.2 577.9 31.816

565.0 26.020

585.0 30.020

18 18.000 22.75 1.25 22.24 1.02 23.03 1.18

500 508.0 635.0 31.820

620.0 26.020

650.0 33.020

20 20.000 25.00 1.25 24.41 1.02 25.59 1.30

600 609.6 749.3 35.120

725.0 30.020

770.0 36.020

24 24.000 29.50 1.38 28.54 1.18 30.31 1.42

1 Same drilling as for B16.5 (Class 150#) and B16.42 (Class 250#).2 Same drilling as for BS 4504 Section 3.2 (PN10) and DIN 2532 (PN10).3 Same drilling as for BS 4504 Section 3.2 (PN16) and DIN 2532 (PN16).For additional information, contact a GRINNELL Sales Representative.

www.grinnell.com


Pressure &

Design Data


Typical General Specification(CSI - Div. 15, Section A Info., Methods, & Instructions)

Section 1 - Grooved Piping Method

GRINNELL grooved pipe couplings, grooved end fittings, grooved end butterfly and check valves, and other system components as manufactured or supplied by Tyco Fire Protection Products shall be used to install piping systems and make mechanical equipment connections in systems within specified operating conditions and working pressures as shown in the coupling manufacturer’s product specification. GRINNELL grooved pipe couplings shall be used for the following systems (subject to applicable local code approval).

Heating / Air ConditioningChilled Water Hot Water Condenser Water Heating Cooling Tower Dual Temperature Machinery Room Utility Water

PlumbingDomestic Hot Water Domestic Cold Water Roof Drains/Storm Drains

OtherVacuum Lubrication Air Pneumatic Conveyor Elevator Hydraulic Low Temperature

Metric/Imperial Conversion Chart

Convert Metric to Imperial Convert Imperial to Metric

MillimetersX 0.03937

InchesX 25.4(mm) (in)

MetersX 3.281

FeetX 0.3048

(m) (ft)Kilograms

X 2.205Pounds

X 0.4536(kg) (lb)

GramsX 0.03527

OuncesX 28.35

(g) (oz)Kilopascals

X 0.145Pressure

X 6.894(kPa) (psi)Bar

X 14.5Pressure

X 0.069(psi)

NewtonsX 0.2248

End LoadX 4.45

(N) (lb)Newton Meters

X 0.738Torque

X 1.356(lbft)

Celsius(C + 17.78) × 1.8

Temp.(F – 32) ÷ 1.8

(°C) (°F)Watts

X 1.341 × 10-3Horsepower

X 745.7(w) (hp)

Liters per min.X 0.2642

Gal. per Min.X 3.785

(L/M) (gpm)Cubic Meters per min.

X 264.210-3 Gal. per Min.

X 3.7865(m3/m) (gpm)

This chart is provided as a guide for converting metric and imperial measurements.



Pressure &

Design Data

269

Typical Guide SpecificationBasic Materials & Methods (CSI - Div. 15 Section 15050)

Section 1 - Materials - Pipe & Pipe Fittings

1.1 Pipe - Pipe shall conform to GRINNELL published tolerance specifications. Steel pipe shall be black or galvanised, conforming to ASTM A-135, A-795 or A-53.

1.2 Couplings - Couplings shall be GRINNELL Figures 705, 707, 772 and 716 cast in ductile iron as specified in ASTM A-536. Couplings shall have nuts and bolts. Couplings shall be coated with a lead free paint as standard, or hot-dipped galvanised in accordance with ASTM A-153 as an option. Couplings shall be GRINNELL Figures 405 and 472 cast in Stainless Steel as specified in ASTM A-743/A-743M. Couplings shall have nuts and bolts.

1.2.1 Gaskets - Gaskets shall be a pressure responsive design, moulded of synthetic elastomer as designated by ASTM D-2000, and shall conform to the coupling housing and pipe outside diameter. Reference shall be made to the latest published GRINNELL gasket selection guide for proper gasket selection for the intended service.

1.2.1.1 Water Service - Gasket shall be Grade “E” EPDM with green colour code identification, for service temperatures from - 34°C to 110°C (-30°F to 230°F). Recommended for hot water not to exceed 110°C (230°F), plus a variety of dilute acids, oil free air and many chemical services. Not recommended for petroleum services or steam.

1.2.1.2 Oil Service - Gasket shall be grade “T” Nitrile with orange colour code identification, for service temperatures from -29°C to 82°C (-20°F to 180°F). Recommended for petroleum products, vegetable oils, mineral oils, and air with oil vapors

1.2.1.3 Other Services - Refer to the latest published GRINNELL gasket selection guide for other service recommendations.

1.2.2 Bolts and Nuts - Shall be heat treated carbon steel, ovalneck track head bolts and heavy hex nuts, conforming to the physical properties of ASTM A-183 with a minimum tensile strength of 7584 Bar (110,000 psi). Bolts and nuts shall be zinc electroplated.

1.3 Flanges - Shall be GRINNELL Figure 71 Flange, casting in ductile iron in accordance with ASTM A-536. Flange shall conform to ANSI Class 125 and 150 bolt patterns and shall be coated with a lead-free paint as standard, or hot dipped galvanised in accordance to ASTM A-153.

1.4 Fittings - Shall be ASTM A-536 ductile iron or fabricated from steel pipe, 32mm - 600mm (1 1⁄4" - 24"). All fittings shall be coated with a lead-free paint as standard, or hot-dipped galvanised as an option in accordance to ASTM A-153.

1.5 Branch Outlets - Shall be GRINNELL Figure 730 mechanical tees or crosses with integral gasket. Figure 730 shall be coated with a lead-free paint as standard, or hot-dipped galvanised as an option.

1.6 Butterfly Valves - Shall be with grooved ends. Valves shall have encapsulated Grade “E” EPDM or Grade “T” Nitrile disc and rated at 20.7 Bar (300 psi) bubble-tight-shut-off. Reference shall be ma1100de to the latest published GRINNELL gasket selection guide for proper disc seal selection for the intended service. Valve bodies shall be ductile iron, and upper stems shall be stainless steel.

1.7 Check Valves - Shall be with grooved ends. Valves shall have a resilient elastomer seal Grade “E” EPDM or Grade “T” Nitrile and rated at 20.7 Bar (300 psi). Reference shall be made to the latest published GRINNELL gasket selection guide for proper seal selection for the intended service. Valve bodies shall be ductile iron with a nickel seat. The caps shall be ductile iron with an attached stainless steel clapper assembly for 60.3mm - 219.1mm (2" - 8") and a ductile iron clapper assembly for 273.0mm - 323.9mm (10" - 12"). All bodies and caps shall be coated with a lead-free paint as standard.

Section 2 - Materials - Pipe Preparation

Pipe shall be prepared according to GRINNELL published specifications, ANSI/AWWA C-606, or other applicable standards.

2.1 Pipe Ends - Shall be clean and free from indentations, projections, burrs, rust or roll marks in the area from pipe end to groove.

2.1.1 Standard Weight Pipe - Shall be roll grooved without removing metal, or cut grooved in accordance with GRINNELL published standard roll groove or standard cut groove specifications.

2.1.2 Lightwall Pipe - Shall be roll grooved without metal removal in accordance with GRINNELL published standard roll groove specifications.

SECTION 3 - ASSEMBLY

3.1 GRINNELL couplings, fittings, flanges and valves shall be assembled in accordance with instructions published

by Tyco Fire Protection Products.

3.1.1 Pipe - Ends shall be clean and free from indentations, projections, burrs, roll marks, etc., in the area from pipe end to groove. Pipe ends shall be square cut and prepared in accordance with standard GRINNELL specifications.

3.1.2 Gasket - Shall be of pressure responsive design verified as proper style and grade suitable for the intended service as published in the latest GRINNELL gasket recommendation technical literature.

3.1.3 Lubrication - A thin, uniform coat of GRINNELL lubricant shall be applied to the entire exterior of the gasket, including the gasket lips. Complete lubrication is essential to prevent gasket pinching and to ease installation and alignment. Petroleum-free silicone gasket lubricant is recommended when gaskets are subject to low temperature conditions. Petroleum lubricants shall not be used for EPDM gaskets.

SECTION 4 - SUPPORT

4.1 Horizontal Piping: ( Contact Tyco Fire Protection Products for support recommendations)

4.1.1 Flexible Connections - No pipe length shall be left unsupported between any two couplings, nor shall any pipe be left unsupported whenever a change in direction of line flow takes place. Supports shall meet the requirements stated above, but in no case shall the distance between supports exceed the following for systems where linear movement is not required:

4.1.2 Rigid Connections - Pipe connections formed with the Figure 772 shall be supported in accordance with applicable ANSI B31.1, Power Piping

Pipe Code.

Distance Between Supports

Nominal Sizemm

Inches

SpanMeters

Feet

42.4 - 48.3 3.71 1

4 - 1 12 12

60.3 - 219.1 4.62 - 8 15

273.0 - 323.9 4.9

10 - 12 16

355.6 - 406.4 5.514 - 16 18

457.2 - 609.6 6.118 - 24 20

Note: The requirements of ANSI, ASME or other code groups may require additional supports.

www.grinnell.com


Pressure &

Design Data


Typical SpecificationsBuilding Service Systems - PlumbingPlumbing Specifications (CSI - Div. 15 Section 15-E Plumbing)

SECTION 1 - DOMESTIC WATER SYSTEMS

(CSI - Div. 15, Section 15-E Water Supply Systems) GRINNELL Mechanical Grooved Pipe couplings, fittings and butterfly valves as manufactured or supplied by Tyco Fire Protection Products shall be used for all water supply systems under operating conditions not to exceed 110°C (230°F) temperature. The coupling gasket and encapsulated disc on butterfly valves shall be Grade “E” EPDM.

1.1 Materials:

1.1.1 Pipe - Pipe shall be galvanised steel pipe, conforming to ASTM A-135, A-795 or A-53. All pipe shall be prepared according to GRINNELL published specifications, or to ANSI/AWWA C-606 grooved end pipe. Pipe ends shall be prepared as detailed in Basic Materials and Methods and to the latest GRINNELL published specifications.

1.1.2 Couplings - All GRINNELL grooved couplings and fittings shall be painted or galvanised Figure 705, 707, 772 or 716 with Grade “E” EPDM gaskets and zinc plated bolts and nuts.

1.1.3 Branch Connections - Shall be made with Figure 730 and/or Figure 522.

1.1.4 Flange Connections - Flange connections shall be GRINNELL Figure 71 Flanges incorporating Grade “E” EPDM gasket.

1.1.5 Fittings - Fittings shall be painted or galvanised GRINNELL standard ductile iron or segmentally welded steel fittings, with grooved ends.

1.1.6 Butterfly Valves - Shall be of grooved end design with a Grade “E” EPDM encapsulated disc. Upper stem shall be stainless steel. Valves shall have pressure assisted double seal and be capable of 300 psi, bubble-tight-shutoff. Butterfly valves shall be with gear actuator or hand lever. Operating conditions not to exceed -34°C to 110°C (-30°F to 230°F).

1.1.7 Check Valves - Shall be of grooved end design with a clapper seal of Grade “E” EPDM. Valves shall be capable of pressures of 300 psi. The valves shall have a spring loaded clapper to ensure a leak tight seal and a nonsticking operation. The clapper seat in the valve body shall be nickel. Operating conditions not to exceed -34°C to 110°C (-30°F to 230°F).

SECTION 2 - STORM DRAINS / ROOF DRAINS

GRINNELL mechanical grooved pipe couplings and fittings as manufactured by Tyco Fire Protection Products shall be used for all storm and roof drainage systems.

2.1 Materials:

2.1.1 Pipe - Pipe shall be galvanised steel pipe, conforming to ASTM A-135, A-795 or A-53. All pipe shall be prepared according to GRINNELL published specifications, or to ANSI/AWWA grooved end pipe. Pipe

ends shall be prepared as detailed in Basic Materials and Methods and to the latest GRINNELL published specifications.

2.1.2 Couplings - Couplings shall be galvanised Figure 705, 707, 772 or 716 with Grade “E” EPDM gaskets and zinc plated bolts and nuts.

2.1.3 Flange Connections - Flange connections shall be galvanised GRINNELL Figure 71 Flanges incorporating Grade “E” EPDM gasket.

2.1.4 Fittings - Fittings shall be galvanised GRINNELL standard ductile iron or segmentally welded steel fittings, with grooved ends.

2.2 Plastic Pipe Systems

2.2.1 Pipe - Pipe with material and dimensions conforming to ASTM D-1785 Type 1, Grade 1 with cut grooves and joint pressure ratings conforming to grooved manufacturer’s

or Type 2, Grade 1 with rolled or radius cut grooves and joint ratings conforming to grooved manufacturer’s specifications and recommendations.

2.2.2 Couplings - Flexible type couplings shall be used.

2.2.3 Flange Connections - Same as in 2.1.3

2.2.4 Fittings - Same as in 2.1.4

SECTION 3 - VENT PIPING

(Same as in Section 2 - Storm Drains / Roof Drains)



Pressure &

Design Data

271

Typical SpecificationsBuilding Service Systems - Cooling

Cooling System Specifications (CSI - Div. 15 Section 15-N Refrigeration Systems)

SECTION 1 - CHILLED WATER - SUPPLY & RETURN

GRINNELL Mechanical Grooved Pipe couplings, fittings and butterfly and check valves as manufactured or supplied by Tyco Fire Protection Products shall be used for cooling system chilled water piping, including risers, mains, equipment connection, branches, supply and return lines under operating conditions not to exceed -34°C to 110°C (-30°F to 230°F) temperature. Calculations shall be made based on coupling manufacturers latest literature to determine expansion/ contraction allowance available, enabling elimination of special movement compensators, swing joints, flexible connections and vibration isolators where possible.

1.1 Materials:

1.1.1 Pipe - Shall be steel pipe, conforming to ASTM A-135, A-795 or A-53. All pipe shall be prepared according to GRINNELL published specifications, or to ANSI/AWWA C-606 grooved end pipe. Pipe ends shall be prepared as detailed in Basic Materials and Methods.

1.1.2 Couplings - All flexible couplings shall be GRINNELL Figure 705 and 707 with Grade “E” EPDM gaskets and zinc plated bolts and nuts. All rigid couplings shall be GRINNELL Figure 772 with Grade “E” EPDM gaskets and zinc plated bolts and nuts.

1.1.3 Branch Connections - Branch stub-in connections shall be made with Figure 730 with Grade “E” EPDM gaskets and zinc plated bolts and nuts.

1.1.4 Flange Connections - Shall be GRINNELL Figure 71 Flange incorporating Grade “E” EPDM gasket.

1.1.5 Fittings - Shall be GRINNELL ductile iron or segmentally welded steel fittings, with grooved ends.

1.1.6 Butterfly Valves - Shall be of grooved end design with EPDM encapsulated disc. Neck design shall readily accommodate insulation. Valves shall have pressure assisted double seal and stainless steel upper stems, and be capable of 20.7 Bar (300 psi), bubble-tight-shut-off, with an actuator or hand lever.

1.1.7 Check Valves - Shall be of grooved end design with a clapper seal of EPDM. The valves shall have a spring loaded clapper to ensure a leak tight seal and a non-sticking operation. The clapper seat in the valve body shall be nickel. Valves shall be capable of pressures of 20.7 Bar (300 psi).

SECTION 2 - COOLING TOWER PIPING

Same as Section 1, except pipe, couplings and fittings shall be galvanised.

SECTION 3 - DUAL TEMPERATURE SYSTEMS PIPING

Same as Section 1.

SECTION 4 - CONDENSER WATER PIPING

Same as Section 1.

www.grinnell.com


Pressure &

Design Data


Typical SpecificationsBuilding Service Systems - HeatingHeating System Specifications (CSI - Div. 15 Section 15-L Water Piping)

SECTION 1 - HOT WATER HEATING SYSTEMS - SUPPLY & RETURN

GRINNELL Mechanical Grooved Pipe couplings, fittings and butterfly and check valves as manufactured or supplied by Tyco Fire Protection Products shall be used for hot water systems , including boiler manifolds, mains, risers, branches, supply and return lines, under operating conditions not to exceed 110°C (230°F). Calculations shall be based on coupling manufacturers latest literature to determine expansion allowance available, enabling elimination of special expansion compensators, swing joints, flexible connections and vibration isolators where possible.

1.1 Materials:

1.1.1 Pipe - Shall be steel pipe, conforming to ASTM A-135, A-795 or A-53. All pipe shall be prepared according to GRINNELL published specifications, or to ANSI/AWWA C-606 grooved end pipe. Pipe ends shall be prepared as detailed in Basic Materials and Methods.

1.1.2 Couplings - All flexible couplings shall be GRINNELL Figure 705 and 707 with Grade “E” EPDM gaskets and zinc plated bolts and nuts. All rigid couplings shall be GRINNELL Figure 772 with Grade “E” EPDM gaskets and zinc plated bolts and nuts. All reducing couplings shall be GRINNELL Figure 716 with Grade “E” EPDM gaskets and zinc plated bolts and nuts.

1.1.3 Branch Connections - Branch stub-in connections shall be made with GRINNELL Figure 730 with Grade “E” EPDM gaskets and zinc plated bolts and nuts.

1.1.4 Flange Connections - Flange connections shall be GRINNELL Figure 71 Flange incorporating Grade “E” EPDM gasket.

1.1.5 Fittings - Fittings shall be GRINNELL ductile iron or segmentally welded steel fittings, with grooved ends.

1.1.6 Butterfly Valves - Shall be of grooved end design with EPDM encapsulated disc. Neck design shall readily accommodate insulation. Valves shall have pressure assisted double seal and stainless steel upper stems, and be capable of 20.7 Bar (300 psi), bubble-tight-shut-off, with an actuator or hand lever.

1.1.7 Check Valves - Shall be of grooved end design with a clapper seal of EPDM. The valves shall have a spring loaded clapper to ensure a leak tight seal and a nonsticking operation. Valves shall be capable of pressures of 20.7 Bar (300 psi).

INDICES

273

www.grinnell.com

INDICES

Indices

274

Keyword Index(Page 1 of 4)

111⁄4° Elbows, 211 & 311 . . . . . . . . . . . . . . . . . . . . . . . 5622-1⁄2° Elbows, 212 & 312 . . . . . . . . . . . . . . . . . . . . . . 551000 PSI Ring Joint Couplings, RH-1000 . . . . . . . . . . . . 2133000 PSI Ring Joint Couplings, RX-3000 . . . . . . . . . . . . 2143770 PSI Ring Joint Couplings, RX-3770 . . . . . . . . . . . . 21545° Elbows, 11EP . . . . . . . . . . . . . . . . . . . . . . . . . . . 17245° Elbows, 201, 301 & 201LR . . . . . . . . . . . . . . . . . . . 5445° Elbows, 401, SS . . . . . . . . . . . . . . . . . . . . . . . . . 15145° Elbows, 72912, G-MINE . . . . . . . . . . . . . . . . . . . 18845° Elbows, Ring Joint, RJ-11 . . . . . . . . . . . . . . . . . . . . 21745° Laterals, 314 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7645° Plain End Elbows, 901 . . . . . . . . . . . . . . . . . . . . . . 19945° Plain End Long Radius Elbows, 901LR . . . . . . . . . . . 20045° Reducing Laterals, 325 . . . . . . . . . . . . . . . . . . . . . . 7745° Sweep Elbows, 72914, G-MINE . . . . . . . . . . . . . . 18990° Elbows, 10EP . . . . . . . . . . . . . . . . . . . . . . . . . . . 17290° Elbows, 210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5290° Elbows, 410, SS . . . . . . . . . . . . . . . . . . . . . . . . . 15190° Elbows, 72910, G-MINE . . . . . . . . . . . . . . . . . . . 18890° Elbows, Ring Joint, RJ-10 . . . . . . . . . . . . . . . . . . . . 21690° Long Radius Elbows, 210LR & 310LR . . . . . . . . . . . . 5390° Plain End Elbows, 910 . . . . . . . . . . . . . . . . . . . . . . 19990° Plain End Long Radius Elbows, 910LR . . . . . . . . . . . 20090° Sweep Elbows, 72913, G-MINE . . . . . . . . . . . . . . 189Access Coupling & End Cap . . . . . . . . . . . . . . . . . . . . . 120Adapter Nipples, 391, 392 & 393 . . . . . . . . . . . . . . . . 81Adapter Nipples, Plain End, 991, 992, & 993 . . . . . . . 205Adapters, Flange (ANSI), 341 . . . . . . . . . . . . . . . . . . . . 48Adapters, Flange (ANSI), 71 . . . . . . . . . . . . . . . . . . 42 - 43Adapters, Flange (ANSI), SS-41, SS . . . . . . . . . . . . . . . 149Adapters, Flange (PN10/PN16), 343 & 344 . . . . . . . 46 - 47Adapters, Flange (PN10/PN16), 71 . . . . . . . . . . . . . . . . 41Adapters, Flange (PN16/PN10), 443 & 444, SS . . . . . . 150Adapters, Flange 72916, G-MINE . . . . . . . . . . . . . . . . 190Adapters, Flange Plain End (ANSI), 942 & 941 . . . . . . . 206Adapters, Flange, Ring Joint, RJ-70 . . . . . . . . . . . . . . . . 220Agency Listings and Approvals . . . . . . . . . . . . . . . . . . . . 11Air, Water & Chemical Gasket Recommendations . . 237 - 239Anchor, FAZ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137Angular Deflection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248Angular Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . 254ANSI Stainless Steel, Maximum Pressure Ratings . . . 262 - 263Approvals and Listings . . . . . . . . . . . . . . . . . . . . . . . . . . 11ASME Standard Note . . . . . . . . . . . . . . . . . . . . . . . . . . 38Ball Valve (3 Port), SJ-530 . . . . . . . . . . . . . . . . . . . . . . 106Ball Valve (Gear), SJ-600W . . . . . . . . . . . . . . . . . . . . . 159Ball Valve (Lever), SJ-600L . . . . . . . . . . . . . . . . . . . . . . 158Ball Valve Gear Operated, SJ-500W . . . . . . . . . . . . . . 105Ball Valve, SJ-500L . . . . . . . . . . . . . . . . . . . . . . . . . . . 104Ball Valve, Three Port, SJ-630 . . . . . . . . . . . . . . . . . . . . 160Ball Valves, BV835 . . . . . . . . . . . . . . . . . . . . . . . 102 - 103Bellows, Flanged Rubber, FSF . . . . . . . . . . . . . . . . . . . 133Bellows, Threaded Rubber, FTU . . . . . . . . . . . . . . . . . . 132Body, End-Cap, Drain Plug and Coupling Segments: . . . . 161Butterfly Valve, Lever Operated for HVAC, 39101HV . . . . 94Butterfly Valve, Large Diameter, B333 . . . . . . . . . . 100 - 101Butterfly Valve, Lever Operated Potable Water, 39101 . . . 95Butterfly Valve, Low Profile, SJ-200 . . . . . . . . . . . . . . . . . 98Butterfly Valves, G-MINE, B8200L . . . . . . . . . . . . . . . . 192Butterfly Valves, Gear Operated for Potable Water, 39107 . 97Butterfly Valves, Lever Operated w/Nitrile Disc, 39101N . . 96Butterfly Valves, Low Profile B8101 . . . . . . . . . . . . . . . . . 99

Cap, Ring Joint, RJ-60 . . . . . . . . . . . . . . . . . . . . . . . . . 220Caps & Plugs, 72915, G-MINE . . . . . . . . . . . . . . . . . . 190Caps, Plain End, 960 . . . . . . . . . . . . . . . . . . . . . . . . . 202CB800 Circuit Balancing Valves Overview & Specs . . . . . 111Centre Punch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225Centre-Stop, Push-On . . . . . . . . . . . . . . . . . . . . . . . . . . 235Check Valves, CV-1 . . . . . . . . . . . . . . . . . . . . . . . 107 - 108Check Valves, Dual Disc, SJ-915 . . . . . . . . . . . . . 109 - 110Chemical, Air, & Water Gasket Recommendations . . 237 - 239Circuit Balancing Valves BSP Threaded Ends . . . . . . . . . . 112Circuit Balancing Valves Flanged Ends, ANSI . . . . . . . . . 115Circuit Balancing Valves Flanged Ends, PN16/PN10 . . . . 114Circuit Balancing Valves Grooved Ends . . . . . . . . . . . . . 113Circuit Balancing Valves Solder Ends . . . . . . . . . . . . . . . 116Clapper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107Concentric Reducer, Ring Joint, RJ-50 . . . . . . . . . . . . . . 219Concentric Reducers, 250 & 350 . . . . . . . . . . . . . . . 70 - 72Concentric Reducers, 450, SS . . . . . . . . . . . . . . . . . . . 155Continuity, Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . 37Conversion Chart, Metric/Imperial . . . . . . . . . . . . . . . . 267Couplings, (Spline x Solvent Weld), 72905, G-MINE . . . 183Couplings, 1000 PSI, Ring Joint, RH-1000 . . . . . . . . . . . 213Couplings, 3770 PSI, Ring Joint, RX-3770 . . . . . . . . . . . 215Couplings, 72904, G-MINE . . . . . . . . . . . . . . . . . . . . 183Couplings, 780 Grooved Snap . . . . . . . . . . . . . . . . . . . . 31Couplings, Extra Heavy Rigid End Protection (EP) XH-70EP 32Couplings, Flange, IPS & ISO Pipe Sizes, 9094 . . . . . . . 168Couplings, Flexible Reducing, 716 . . . . . . . . . . . . . . . . . 33Couplings, Flexible, 405, SS . . . . . . . . . . . . . . . . . . . . 144Couplings, Flexible, 705 . . . . . . . . . . . . . . . . . . . . . . . . 24Couplings, Flexible, Heavy Duty, SS-8X . . . . . . . . . . . . . 145Couplings, Flexible, High Pressure, SS-1200 . . . . . . . . . . 146Couplings, Flexible, Rilsan Coated 705R . . . . . . . . . . . . 147Couplings, Flexible, Shouldered, S35 . . . . . . . . . . . . . . 177Couplings, Galvanised Finish . . . . . . . . . . . . . . . . . . . . . 37Couplings, Heavy Duty Flexible, 707 . . . . . . . . . . . . 26 - 27Couplings, High Pressure Rigid, 770 . . . . . . . . . . . . . . . 25Couplings, Hinged Lever, SS-28, SS . . . . . . . . . . . . . . . 148Couplings, Installation Information . . . . . . . . . . . . . . . . . . 38Couplings, IPS & ISO Pipe Sizes, 9095, HDPE . . . . 165 - 166Couplings, Large Diameter Flexible, 7707N . . . . . . . . . . 29Couplings, Large Diameter, 707L . . . . . . . . . . . . . . . . . . 28Couplings, Large Diameter, Ring Joint R-88 . . . . . . . . . . . 212Couplings, Outlet, 72940, G-MINE . . . . . . . . . . . 184 - 185Couplings, Outlet, 702 Mechanical . . . . . . . . . . . . . 34 - 35Couplings, Painted Finish . . . . . . . . . . . . . . . . . . . . . . . . 37Couplings, Plain End, 909 . . . . . . . . . . . . . . . . . . . . . . . 30Couplings, Rapid Installation Pivot-Bolt (GRIP) Rigid, 740 . . 22Couplings, Reducing 72919, G-MINE . . . . . . . . . . . . . . 184Couplings, Required . . . . . . . . . . . . . . . . . . . . . . . . . . 250Couplings, Rigid (Large Diameter), SS-7X . . . . . . . . . . . . 143Couplings, Rigid 772 . . . . . . . . . . . . . . . . . . . . . . . 20 - 21Couplings, Rigid, 472, SS . . . . . . . . . . . . . . . . . . . . . . 142Couplings, Rigid, 774 . . . . . . . . . . . . . . . . . . . . . . . . . 23Couplings, Rigid, Extra Heavy (EP) XH-70EP . . . . . . 32, 171Couplings, Ring Joint, 3000 PSI, RX-3000 . . . . . . . . . . . 214Couplings, Ring Joint, R-88 . . . . . . . . . . . . . . . . . 210 - 211Couplings, Specifications, Stainless Steel Systems . . . . . . 141Couplings, Toggle, Shouldered, SD-28 . . . . . . . . . . . . . 178Couplings, Transition IPS & ISO Pipe Sizes, 9097 HDPE . 167Couplings, Transition, 7706-T . . . . . . . . . . . . . . . . . . . . . 36Cross, 227 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page


INDICES

Indices

275


Cross, 35EP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173Cross, Plain End, 927 . . . . . . . . . . . . . . . . . . . . . . . . . 201Cut Grooved Fittings (End Protection), Extra Heavy . . . . . 172Cut Groove Specification . . . . . . . . . . . . . . . . . . . 229 - 230Cut-Groove Specification, End Protection (EP) . . . . . . . . . 232Deflection and Misalignment . . . . . . . . . . . . . . . . . . . . . 251Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 248Dielectric Waterways, 407GT & 407T . . . . . . . . . . . . . 138Diffusers, Suction, S810 . . . . . . . . . . . . . . . . . . . 122 - 123Drilling Flange Specifications . . . . . . . . . . . . . . . . . . . . 268Dual Disc Check Valves, SJ-915 . . . . . . . . . . . . . . 109 - 110Eccentric Reducer, Ring Joint, RJ-51 . . . . . . . . . . . . . . . . 219Eccentric Reducers, 251 & 351 . . . . . . . . . . . . . . . . . 73 - 75Elbows, 111⁄4°, 211 & 311 . . . . . . . . . . . . . . . . . . . . . . 56Elbows, 221⁄2°, 212 & 312 . . . . . . . . . . . . . . . . . . . . . . 55Elbows, 45° Long Radius, Plain End, 901LR . . . . . . . . . . 200Elbows, 45° Plain End, 901 . . . . . . . . . . . . . . . . . . . . . 199Elbows, 45° Sweep, 72914, G-MINE . . . . . . . . . . . . . . 189Elbows, 45°, 11EP . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Elbows, 45°, 201, 301 & 201LR . . . . . . . . . . . . . . . . . . 54Elbows, 45°, 401, SS . . . . . . . . . . . . . . . . . . . . . . . . . 151Elbows, 45°, 72912, G-MINE . . . . . . . . . . . . . . . . . . . 188Elbows, 90° Long Radius, 210LR & 310LR . . . . . . . . . . . . 53Elbows, 90° Long Radius, Plain End , 910LR . . . . . . . . . 200Elbows, 90° Plain End, 910 . . . . . . . . . . . . . . . . . . . . . 199Elbows, 90° Sweep, 72913, G-MINE . . . . . . . . . . . . . . 189Elbows, 90°, 10EP . . . . . . . . . . . . . . . . . . . . . . . . . . . 172Elbows, 90°, 210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52Elbows, 90°, 410, SS . . . . . . . . . . . . . . . . . . . . . . . . . 151Elbows, 90°, 72910, G-MINE . . . . . . . . . . . . . . . . . . . 188Elbows, Long Radius 3D . . . . . . . . . . . . . . . . . . . . . . . . 57Elbows, Long Radius 5D . . . . . . . . . . . . . . . . . . . . . . . . 58Elbows, Long Radius 6D . . . . . . . . . . . . . . . . . . . . . . . . 59Electrical Continuity . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37End Caps with Threaded Outlet, 361 thru 365 . . . . . . 63 - 64End Caps, 260 & 360 . . . . . . . . . . . . . . . . . . . . . . . . . 62End Caps, 460, SS . . . . . . . . . . . . . . . . . . . . . . . . . . . 153End Protection (EP) Cut-Groove Specification . . . . . . . . . . 232End Protection, Extra Heavy, Fittings . . . . . . . . . . . . . . . 172Expansion Joint, 7550 . . . . . . . . . . . . . . . . . . . . . 124 - 129Expansion Joint, ALG . . . . . . . . . . . . . . . . . . . . . . . . . 131Expansion Joint, ANS . . . . . . . . . . . . . . . . . . . . . . . . . 132Expansion Joint, RXAG . . . . . . . . . . . . . . . . . . . . . . . . 130Expansion and Contraction . . . . . . . . . . . . . . . . . . . . . . 248Extra Heavy Cut Grooved Fittings (End Protection) . . . . . . 172Extra Heavy Rigid Couplings (EP) XH-70EP . . . . . . . 32, 171Extra Heavy Systems Table of Contents . . . . . . . . . . . . . . 170Fitting Friction Resistance Chart . . . . . . . . . . . . . . . . . . . . 51Fitting Specifications, Stainless Steel Systems . . . . . . . . . 141Fittings Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 51Fittings, End Protection, Extra Heavy, . . . . . . . . . . . . . . 172Fix Point, HERCULES . . . . . . . . . . . . . . . . . . . . . . . . . . 136Flange Adapter Technical Data . . . . . . . . . . . . . . . . . . . . 45Flange Adapter Washers . . . . . . . . . . . . . . . . . . . . . . . . 44Flange Adapter, Ring Joint, RJ-70 . . . . . . . . . . . . . . . . . 220Flange Adapters (ANSI), 341 . . . . . . . . . . . . . . . . . . . . 48Flange Adapters (ANSI), 71 . . . . . . . . . . . . . . . . . . 42 - 43Flange Adapters (ANSI), SS-41, SS . . . . . . . . . . . . . . . . 149Flange Adapters (PN10/PN16 BS 4504), 343 & 344 . 46 - 47Flange Adapters (PN10/PN16 BS 4504), 71 . . . . . . . . . . 41Flange Adapters (PN16/PN10 BS 4504), 443 & 444, SS 150Flange Adapters Table of Contents . . . . . . . . . . . . . . . . . . 40

Flange Adapters, 72916, G-MINE . . . . . . . . . . . . . . . . 190Flange Adapters, Plain End (ANSI), 942 & 941 . . . . . . . 206Flange Couplings IPS & ISO Pipe Sizes, 9094 . . . . . . . . 168Flange Drilling Specifications . . . . . . . . . . . . . . . . . . . . 268Flanged Rubber Bellows, FSF . . . . . . . . . . . . . . . . . . . . 133Flexible Coupling, Heavy Duty, SS-8X . . . . . . . . . . . . . . 145Flexible Coupling, Rilsan Coated 705R . . . . . . . . . . . . . 147Flexible Coupling, Shouldered, S35 . . . . . . . . . . . . . . . 177Flexible Couplings, 405, SS . . . . . . . . . . . . . . . . . . . . . 144Flexible Couplings, 705 . . . . . . . . . . . . . . . . . . . . . . . . 24Flexible Couplings, High Pressure, SS-1200 . . . . . . . . . . 146Flexible Hoses, UFBX . . . . . . . . . . . . . . . . . . . . . 134 - 135Flexible Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252Flexible Reducing Couplings, 716 . . . . . . . . . . . . . . . . . 33Flow Characteristics, Grooved Butterfly Valve . . . . . . . . . . 93Flow Meter Butt Weld, Venturi . . . . . . . . . . . . . . . . . . . . 119Freezer Gasket, Tri-Seal . . . . . . . . . . . . . . . . . . . . . . . . 236G-MINE PVC Systems . . . . . . . . . . . . . . . . . . . . . . . . . 181G-MINE PVC Systems Table of Contents . . . . . . . . . . . . . 180Galvanised Finish, Couplings . . . . . . . . . . . . . . . . . . . . . 37Gasket - Air, Water & Chemical Recommendations . 237 - 239Gasket Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240Gasket, Freezer Tri-Seal . . . . . . . . . . . . . . . . . . . . . . . . 236Gaskets, Replacement . . . . . . . . . . . . . . . . . . . . . 241 - 245Gaskets, Replacement for 72899, G-MINE . . . . . . . . . . 194Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 226Global Pipe Size Designations . . . . . . . . . . . . . . . . . . . 266Government Agencies, Associations, & Approval Bodies . . 11GRINNELL Coupling Gasket Specifications . . . . . . . . . . . . 19GRINNELL Gasket Grade & Recommendations . . . . 236 - 239GRINNELL Gasket Lubricants . . . . . . . . . . . . . . . . . . . . 240GRINNELL Gasket Seal . . . . . . . . . . . . . . . . . . . . . . . . 234GRINNELL Gasket Styles . . . . . . . . . . . . . . . . . . . . . . . 235GRINNELL Gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . 226GRINNELL Groove Measurement Tapes . . . . . . . . . . . . . 225GRINNELL Part Numbers, How to Build . . . . . . . . . . . . . . 15GRINNELL Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Groove Measurement Tapes . . . . . . . . . . . . . . . . . . . . . 225Groove, Cut Specification . . . . . . . . . . . . . . . . . . 229 - 230Groove, Roll Specification . . . . . . . . . . . . . . . . . . 227 - 228Grooved Butterfly Valve Flow Characteristics . . . . . . . . . . . 93Grooved Couplings Table of Contents . . . . . . . . . . . . . . . 18Grooved Fittings Table of Contents . . . . . . . . . . . . . . . . . . 50HDPE couplings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164HDPE Couplings IPS & ISO Pipe Sizes, 9095 . . . . . 165 - 166HDPE Flange Couplings IPS & ISO Pipe Sizes, 9094 . . . . 168HDPE Systems Table of Contents . . . . . . . . . . . . . . . . . . 164HDPE Transition Couplings IPS & ISO Pipe Sizes, 9097 . . 167Header Tee, 22EP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Heavy Duty Flexible Coupling, SS-8X . . . . . . . . . . . . . . 145Heavy Duty Flexible Couplings, 707 . . . . . . . . . . . . . 26 - 27High Pressure Flexible Couplings, SS-1200 . . . . . . . . . . . 146High Pressure Rigid Couplings, 770 . . . . . . . . . . . . . . . . 25Hinged Lever Coupling, SS-28, SS . . . . . . . . . . . . . . . . 148Hole Cutting Tool Spare Parts . . . . . . . . . . . . . . . . . . . . 224Hole Cutting Tool, Figure HCTOOL . . . . . . . . . . . . . . . . 224Hose Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134Hoses, Flexible, UFBX . . . . . . . . . . . . . . . . . . . . . 134 - 135How to Build GRINNELL Part Numbers . . . . . . . . . . . . . . . 15Hydrant Tee, 222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Imperial/Metric Conversion Chart . . . . . . . . . . . . . . . . . 267Insertion Tools, G-MINE . . . . . . . . . . . . . . . . . . . . . . . . 193


www.grinnell.com

INDICES

Indices

276

Installation Information, Coupling . . . . . . . . . . . . . . . . . . 38Insulation Kits, CB800 Circuit Balancing Valves . . . . . . . 117IPS Pipe, Cut Groove Specification . . . . . . . . . . . . 229 - 230IPS Pipe, Large Diameter, Roll Groove Specifications . . . . 231IPS Pipe, Roll Groove Specification . . . . . . . . . . . . 227 - 228ISO Stainless Steel, Maximum Pressure Ratings . . . . 264 - 265ISO 9001:2008 Certified . . . . . . . . . . . . . . . . . . . . . . . 13ISO Size Steel Pipe, Working Pressure Ratings . . . . 257 - 259Joint, Expansion, 7550 . . . . . . . . . . . . . . . . . . . . 124 - 129Joint, Expansion, ALG . . . . . . . . . . . . . . . . . . . . . . . . . 131Joint, Expansion, ANS . . . . . . . . . . . . . . . . . . . . . . . . 132Joint, Expansion, RXAG . . . . . . . . . . . . . . . . . . . . . . . . 130Laboratories, Government Agencies, General Code Groups,

Associations, and Approval Bodies . . . . . . . . . . . . . . . . 11Large Diameter Butterfly Valve, B333 . . . . . . . . . . . 100 - 101Large Diameter Couplings, 707L . . . . . . . . . . . . . . . . . . 28Large Diameter Flexible Couplings, 7707N . . . . . . . . . . . 29Large Diameter IPS Pipe, Standard Roll Groove . . . . . . . . 231Large Diameter Ring Joint Couplings, R-88 . . . . . . . . . . . 212Laterals, 45°, 314 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Laterals, Plain End, 914 . . . . . . . . . . . . . . . . . . . . . . . . 203Laterals, Reducing 45°, 325 . . . . . . . . . . . . . . . . . . . . . . 77Light Wall Roll Grooved Working Pressure . . . . . . . 260 - 261Linear Movement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253Linear Movement (Flexible Couplings) . . . . . . . . . . . . . . 248Listings and Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . 11Long Radius 3D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . 57Long Radius 45° Elbows, Plain End, 901LR . . . . . . . . . . 200Long Radius 5D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . 58Long Radius 6D Elbows . . . . . . . . . . . . . . . . . . . . . . . . . 59Long Radius 90° Elbows, Plain End , 910LR . . . . . . . . . . 200Low Profile Butterfly Valve, SJ-200 . . . . . . . . . . . . . . . . . 98Low Profile Butterfly Valves, B8101 . . . . . . . . . . . . . . . . . 99Lubricants, Gasket . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240Maximum Pressure Ratings - ANSI Stainless Steel . . . 262 - 263Maximum Pressure Ratings - ISO Stainless Steel . . . . 264 - 265Measurement Tapes Groove, . . . . . . . . . . . . . . . . . . . . 225Measuring Computer, MC2 . . . . . . . . . . . . . . . . . . . . . 117Mechanical Tee, SS-723 . . . . . . . . . . . . . . . . . . . . . . . 162Mechanical Tees – Grooved, 730 . . . . . . . . . . . . . . . 88 - 90Mechanical Tees – Threaded, 730 . . . . . . . . . . . . . . 85 - 87Meter Flow, Butt Weld, Venturi . . . . . . . . . . . . . . . . . . . 119Metering Station, 70607 Groove End . . . . . . . . . . . . . . 118Metric/Imperial Conversion Chart . . . . . . . . . . . . . . . . . 267Minimum Pipe Diameters from Fittings . . . . . . . . . . . . . . 111Misalignment and Deflection . . . . . . . . . . . . . . . . . . . . . 251Movement, Thermal . . . . . . . . . . . . . . . . . . . . . . . 249 - 250Nipples, Adapter, 391, 392 & 393 . . . . . . . . . . . . . . . . 81Nipples, Adapter, Plain End, 991, 992, & 993 . . . . . . . 205Nipples, G-MINE . . . . . . . . . . . . . . . . . . . . . . . . 185 - 187Nipples, Machined . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82Nipples, Swaged, Plain End, 999 . . . . . . . . . . . . . . . . . 204No Special Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8NOISE AND VIBRATION . . . . . . . . . . . . . . . . . . . . . . . . 10Outlet Couplings, 702 Mechanical . . . . . . . . . . . . . . 34 - 35Outlet Couplings, G-MINE . . . . . . . . . . . . . . . . . . 184 - 185Outlet Fittings Table of Contents . . . . . . . . . . . . . . . . . . . . 84Overview, Circuit Balancing Valves . . . . . . . . . . . . . . . . 111Paint Process . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Part Numbers, How to Build . . . . . . . . . . . . . . . . . . . . . . 15Pipe Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 256Pipe Preparation Tools . . . . . . . . . . . . . . . . . . . . . . . . . 223

Pipe Size Designations . . . . . . . . . . . . . . . . . . . . . . . . . 266Pipe Stands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223Pipe Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252 - 254Pipe, SDR (Spline x Spline), 72900, G-MINE . . . . . . . . . 182Pivot-Bolt (GRIP) Rapid Installation Rigid Couplings, 740 . . 22Plain End 45° Elbows, 901 . . . . . . . . . . . . . . . . . . . . . . 199Plain End 90° Elbows, 910 . . . . . . . . . . . . . . . . . . . . . . 199Plain End Adapter Nipples, 991, 992, & 993 . . . . . . . . 205Plain End Caps, 960 . . . . . . . . . . . . . . . . . . . . . . . . . . 202Plain End Couplings, 909 . . . . . . . . . . . . . . . . . . . . . . . 30Plain End Crosses, 927 . . . . . . . . . . . . . . . . . . . . . . . . 201Plain End Flange Adapters (ANSI), 942 & 941 . . . . . . . . 206Plain End Laterals, 914 . . . . . . . . . . . . . . . . . . . . . . . . 203Plain End Long Radius 45° Elbows, 901LR . . . . . . . . . . . 200Plain End Reducing Tees, 921 . . . . . . . . . . . . . . . . . . . . 203Plain End Swaged Nipples, 999 . . . . . . . . . . . . . . . . . . 204Plain End Systems Table of Contents . . . . . . . . . . . . . . . . 196Plain End Tees, 919 . . . . . . . . . . . . . . . . . . . . . . . . . . . 201Plain End True Wyes, 924 . . . . . . . . . . . . . . . . . . . . . . 202Plugs & Caps, 72915, G-MINE . . . . . . . . . . . . . . . . . . 190Pre-Manufactured/Product Design . . . . . . . . . . . . . . . . . . 12Preparation Equipment Table of Contents . . . . . . . . . . . . 222Preparation Tools, Pipe . . . . . . . . . . . . . . . . . . . . . . . . 223Pressure Ratings, ISO & IPS . . . . . . . . . . . . . . . . . . . . . 164Pressure Ratings, Max. - ANSI Stainless Steel . . . . . 262 - 263Pressure Ratings, Max. - ISO Stainless Steel . . . . . . 264 - 265Pressure Ratings, Working - ISO Size Steel Pipe . . . . 257 - 259Pressure Ratings, Working Light Wall Roll Groove . . 260 - 261PVC Systems, G-MINE . . . . . . . . . . . . . . . . . . . . . . . . 181PVC Temperature Service Factor: . . . . . . . . . . . . . . . . . . 181Rapid Installation Pivot-Bolt (GRIP) Rigid Couplings, 740 . . 22Reducers, Concentric, 250 & 350 . . . . . . . . . . . . . . 70 - 72Reducers, Concentric, 450, SS . . . . . . . . . . . . . . . . . . . 155Reducers, Eccentric, 251 & 351 . . . . . . . . . . . . . . . . 73 - 75Reducing 45° Laterals, 325 . . . . . . . . . . . . . . . . . . . . . . 77Reducing Couplings, 72919, G-MINE . . . . . . . . . . . . . . 184Reducing Couplings, Flexible, 716 . . . . . . . . . . . . . . . . . 33Reducing Tees, 322 . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Reducing Tees, 221 & 321 . . . . . . . . . . . . . . . . . . . 65 - 68Reducing Tees, 421, SS . . . . . . . . . . . . . . . . . . . . . . . 154Reducing Tees, 72918, G-MINE . . . . . . . . . . . . . . . . . . 191Reducing Tees, Plain End, 921 . . . . . . . . . . . . . . . . . . . 203Reducing Tees, Ring Joint, RJ-21 . . . . . . . . . . . . . . . . . . 218Reducing Tees, Wyes, 331 . . . . . . . . . . . . . . . . . . . . . . 80Replacement Gaskets . . . . . . . . . . . . . . . . . . 194, 241 - 245Retrofits and Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Rigid Couplings, (Large Diameter), SS-7X . . . . . . . . . . . . 143Rigid Couplings, 472, SS . . . . . . . . . . . . . . . . . . . . . . . 142Rigid Couplings, 772 . . . . . . . . . . . . . . . . . . . . . . . 20 - 21Rigid Couplings, 774 . . . . . . . . . . . . . . . . . . . . . . . . . . 23Rigid Couplings, Extra Heavy, (EP), XH-70EP . . . . . . 32, 171Rigid Joints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 252Rilsan Coated Flexible Coupling, 705R . . . . . . . . . . . . . 147Ring Joint, 3000 PSI Couplings, RX-3000 . . . . . . . . . . . 214Ring Joint, 45° Elbows, RJ-11 . . . . . . . . . . . . . . . . . . . . 217Ring Joint, 90° Elbows, RJ-10 . . . . . . . . . . . . . . . . . . . . 216Ring Joint, Cap, RJ-60 . . . . . . . . . . . . . . . . . . . . . . . . . 220Ring Joint, Concentric Reducer, RJ-50 . . . . . . . . . . . . . . 219Ring Joint, Couplings, 1000 PSI, RH-1000 . . . . . . . . . . . 213Ring Joint, Couplings, 3770 PSI, RX-3770 . . . . . . . . . . . 215Ring Joint, Couplings, R-88 . . . . . . . . . . . . . . . . . 210 - 211Ring Joint, Eccentric Reducer RJ-51 . . . . . . . . . . . . . . . . 219




INDICES

Indices

277

Ring Joint, Large Diameter Couplings, R-88 . . . . . . . . . . . 212Ring Joint, Reducing Tees, RJ-21 . . . . . . . . . . . . . . . . . . 218Ring Joint, Specifications . . . . . . . . . . . . . . . . . . . . . . . 209Ring Joint, Table of Contents . . . . . . . . . . . . . . . . . . . . . 208Ring Joint, Tee, RJ-20 . . . . . . . . . . . . . . . . . . . . . . . . . 217Roll Groove for Large Diameter IPS Pipe . . . . . . . . . . . . . 231Roll Groove Specification for Steel IPS Pipe . . . . . . . 227 - 228Rotational Movement . . . . . . . . . . . . . . . . . . . . . . . . . . 253Rubber Bellows Threaded, FTU . . . . . . . . . . . . . . . . . . . 132Rubber Bellows, Flanged, FSF . . . . . . . . . . . . . . . . . . . 133SDR Pipe (Spline x Spline), 72900, G-MINE . . . . . . . . . 182Shouldered Flexible Coupling, S35 . . . . . . . . . . . . . . . . 177Shouldered Systems Specifications . . . . . . . . . . . . . . . . . 176Shouldered Systems Table of Contents & Specifications . . 176Shouldered Toggle Coupling, SD-28 . . . . . . . . . . . . . . . 178Shurjoint Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14Snap Couplings, 780 Grooved . . . . . . . . . . . . . . . . . . . 31Spare Parts, Hole Cutting Tool . . . . . . . . . . . . . . . . . . . 224Specifications, Circuit Balancing Valves . . . . . . . . . . . . . 111Specifications, Ring Joint . . . . . . . . . . . . . . . . . . . . . . . 209Specifications, Shouldered Systems . . . . . . . . . . . . . . . . 176Splines, 72999, G-MINE . . . . . . . . . . . . . . . . . . . . . . . 193Stainless Steel Hinged Lever Coupling, SS-28 . . . . . . . . . 148Stainless Steel Housing Specifications . . . . . . . . . . . . . . 141Stainless Steel ISO - Maximum Pressure Ratings . . . . 264 - 265Stainless Steel Systems Table of Contents . . . . . . . . . . . . 140Stainless Steel, ANSI, Maximum Pressure Ratings . . 262 - 263Standard Roll Groove for Large Diameter IPS Pipe . . . . . . 231Stands, Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 223Steel Pipe, ISO Size, Working Pressure Ratings . . . . 257 - 259Steel Pipe, Light Wall Roll Groove Working Pressure 260 - 261Strainer Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Strainer, WYE, 760 . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Strainer, Y, SJ-726 . . . . . . . . . . . . . . . . . . . . . . . . . . . 161Strainers, Tee, S855 . . . . . . . . . . . . . . . . . . . . . . . . . . 121Suction Diffusers, S810 . . . . . . . . . . . . . . . . . . . . 122 - 123Swaged Nipples, Plain End, 999 . . . . . . . . . . . . . . . . . 204Sweep, Elbows, 45° 72914, G-MINE . . . . . . . . . . . . . . 189Table of Contents, Extra Heavy Systems . . . . . . . . . . . . . 170Table of Contents, Flange Adapters . . . . . . . . . . . . . . . . . 40Table of Contents, G-MINE PVC Systems . . . . . . . . . . . . 180Table of Contents, Grooved Couplings . . . . . . . . . . . . . . 18Table of Contents, Grooved Fittings . . . . . . . . . . . . . . . . . 50Table of Contents, HDPE Systems . . . . . . . . . . . . . . . . . 164Table of Contents, Outlet Fittings . . . . . . . . . . . . . . . . . . . 84Table of Contents, Plain End Systems . . . . . . . . . . . . . . . 196Table of Contents, Ring Joint . . . . . . . . . . . . . . . . . . . . . 208Table of Contents, Shouldered Systems . . . . . . . . . . . . . . 176Table of Contents, Stainless Steel Systems . . . . . . . . . . . . 140Table of Contents, Valves & Accessories . . . . . . . . . . . . . 92Tapes, Groove Measurement . . . . . . . . . . . . . . . . . . . . 225Technical Data, Flange Adapter . . . . . . . . . . . . . . . . . . . 45Tees, 20EP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 173Tees, 219 & 319 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Tees, 419, SS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152Tees, 72917, G-MINE . . . . . . . . . . . . . . . . . . . . . . . . . 191Tees, Header, 22EP . . . . . . . . . . . . . . . . . . . . . . . . . . . 174Tees, Hydrant, 222 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Tees, Mechanical – Grooved, 730 . . . . . . . . . . . . . . 88 - 90Tees, Mechanical – Threaded, 730 . . . . . . . . . . . . . . 85 - 87Tees, Mechanical, SS-723 . . . . . . . . . . . . . . . . . . . . . . 162Tees, Plain End, 919 . . . . . . . . . . . . . . . . . . . . . . . . . . 201

Tees, Reducing, 322 . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Tees, Reducing, 221 & 321 . . . . . . . . . . . . . . . . . . . 65 - 68Tees, Reducing, 421, SS . . . . . . . . . . . . . . . . . . . . . . . 154Tees, Reducing, 72918, G-MINE . . . . . . . . . . . . . . . . . 191Tees, Reducing, Plain End, 921 . . . . . . . . . . . . . . . . . . . 203Tees, Reducing, Ring Joint, RJ-21 . . . . . . . . . . . . . . . . . . 218Tees, Ring Joint, RJ-20 . . . . . . . . . . . . . . . . . . . . . . . . . 217Tees, Strainers, S855 . . . . . . . . . . . . . . . . . . . . . . . . . 121Tees Wyes, 330 . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 79Tees, Wyes, Reducing, 331 . . . . . . . . . . . . . . . . . . . . . . 80Testing and Product Design . . . . . . . . . . . . . . . . . . . . . . . 12Thermal Contraction . . . . . . . . . . . . . . . . . . . . . . . . . . 250Thermal Expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . 250Thermal Movement . . . . . . . . . . . . . . . . . . . . . . . 249 - 250Three Port Ball Valve, SJ-630 . . . . . . . . . . . . . . . . . . . . 160Toggle Coupling, Shouldered, SD-28 . . . . . . . . . . . . . . 178Tool, Hole Cutting, Figure HCTOOL . . . . . . . . . . . . . . . 224Tools, Insertion, G-MINE . . . . . . . . . . . . . . . . . . . . . . . 193Tools, Pipe Preparation . . . . . . . . . . . . . . . . . . . . . . . . 223Transition Couplings IPS & ISO Pipe Sizes, 9097 HDPE . . 167Transition Couplings, 7706-T . . . . . . . . . . . . . . . . . . . . . 36Tri-Seal Freezer Gasket . . . . . . . . . . . . . . . . . . . . . . . . 236True Wyes, Plain End, 924 . . . . . . . . . . . . . . . . . . . . . . 202Tyco Acquires Shurjoint . . . . . . . . . . . . . . . . . . . . . . . . . 14Typical General Specification . . . . . . . . . . . . . . . . 268 - 272Valve, Ball (3 Port), SJ-530 . . . . . . . . . . . . . . . . . . . . . 106Valve, Ball (Gear), SJ-600W . . . . . . . . . . . . . . . . . . . . 159Valve, Ball (Lever), SJ-600L . . . . . . . . . . . . . . . . . . . . . 158Valve, Ball, Gear Operated, SJ-500W . . . . . . . . . . . . . 105Valve, Ball, SJ-500L . . . . . . . . . . . . . . . . . . . . . . . . . . 104Valve, Ball, Three Port, SJ-630 . . . . . . . . . . . . . . . . . . . 160Valve, Butterfly, Lever Operated for HVAC, 39101HV . . . . 94Valve, Butterfly, Large Diameter, B333 . . . . . . . . . . 100 - 101Valve, Butterfly, Lever Operated for Potable Water, 39101 95Valve, Butterfly, Low Profile, SJ-200 . . . . . . . . . . . . . . . . . 98Valves & Accessories Table of Contents . . . . . . . . . . . . . . 92Valves, Ball BV835 . . . . . . . . . . . . . . . . . . . . . . . 102 - 103Valves, Butterfly, Gear Operated, Potable Water, 39107 . . 97Valves, Butterfly, Lever Operated w/Nitrile Disc, 39101N . 96Valves, Butterfly, Low Profile B8101 . . . . . . . . . . . . . . . . 99Valves, Check, CV-1 . . . . . . . . . . . . . . . . . . . . . . 107 - 108Valves, Check, Dual Disc, SJ-915 . . . . . . . . . . . . . 109 - 110Valves, Circuit Balancing, BSP Threaded Ends . . . . . . . . . 112Valves, Circuit Balancing, Flanged Ends, ANSI . . . . . . . . 115Valves, Circuit Balancing, Flanged Ends, PN16/PN10 . . . 114Valves, Circuit Balancing, Grooved Ends . . . . . . . . . . . . 113Valves, Circuit Balancing, Solder Ends . . . . . . . . . . . . . . 116Valves, G-MINE Butterfly, B8200L . . . . . . . . . . . . . . . . . 192Vertical Piping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255Washers, Flange Adapter . . . . . . . . . . . . . . . . . . . . . . . 44Water, Air & Chemical Gasket Recommendations . . 237 - 239Waterways, Dielectric, 407GT & 407T . . . . . . . . . . . . . 138Website . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16Weld Rings: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208Working Pressure Ratings ISO Size Steel Pipe . . . . . 257 - 259Working Pressure Ratings, Light Wall Roll Groove . . 260 - 261Worm Gear Operator . . . . . . . . . . . . . . . . . . . . . . . . . 101WYE-Strainer, 760 . . . . . . . . . . . . . . . . . . . . . . . . . . . 120Wyes, Tees, 330 . . . . . . . . . . . . . . . . . . . . . . . . . . 78 - 79Wyes, True, Plain End, 924 . . . . . . . . . . . . . . . . . . . . . 202Y Strainer, SJ-726 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161



www.grinnell.com

INDICES

Indices

278

Part Number Index(Page 1 of 4)

1BUNA730 .......2451EPDM730 ........2452BUNA730 .......2452BUNA730 .......2452EPDM730 ........2452EPDM730 ........2453BUNA730 .......2453BUNA730 .......2453BUNA730 .......2453BUNA730 .......2453EPDM730 ........2453EPDM730 ........2453EPDM730 ........2453EPDM730 ........2454BUNA730 .......2454EPDM730 ........2455BUNA730 .......2455EPDM730 ........2456BUNA730 .......2456EPDM730 ........2457BUNA730 .......2457EPDM730 ........2458BUNA730 .......2458EPDM730 ........2459BUNA730 .......2459EPDM730 ........24510BUNA ...........24110EPDM ...........24110EPDM-PW ......24110EPDM-TRI .......24110SILICONE ......24210VITON ..........24211BUNA ...........24111BUNA71 .......24311BUNA909 .....24311EPDM ...........24111EPDM-PW ......24111EPDM-TRI .......24111EPDM71 ........24311EPDM909 ......24311SILICONE ......24211VITON ..........24212BUNA ...........24112EPDM ...........24112EPDM-PW ......24112EPDM-TRI .......24112SILICONE ......24212VITON ..........24213BUNA ...........24113BUNA71 .......24313EPDM ...........24113EPDM-PW ......24113EPDM-TRI .......24113EPDM71 ........24313SILICONE ......24213VITON ..........24214BUNA ...........24114EPDM ...........24114SILICONE ......24214VITON ..........24215BUNA ...........24115BUNA780 .....24315EPDM ...........24115EPDM-PW ......24115EPDM-TRI .......24115EPDM780 ......24315SILICONE ......24215VITON ..........242

16BUNA ...........24116EPDM ...........24116SILICONE ......24216VITON ..........24218BUNA ...........24118EPDM ...........24118VITON ..........24220BUNA ...........24120BUNA71 .......24320BUNA780 .....24320BUNA909 .....24320EPDM ...........24120EPDM-PW ......24120EPDM-TRI .......24120EPDM71 ........24320EPDM780 ......24320EPDM909 ......24320SILICONE ......24220VITON ..........24221BUNA ...........24121EPDM ...........24121VITON ..........24224BUNA ...........24124EPDM ...........24124VITON ..........24225BUNA ...........24125BUNA71 .......24325BUNA780 .....24325BUNA909 .....24325EPDM ...........24125EPDM-PW ......24125EPDM-TRI .......24125EPDM71 ........24325EPDM780 ......24325EPDM909 ......24325SILICONE ......24225VITON ..........24226BUNA ...........24126BUNA71 .......24326BUNA780 .....24326EPDM ...........24126EPDM-PW ......24126EPDM-TRI .......24126EPDM71 ........24326EPDM780 ......24326SILICONE ......24226VITON ..........24230BUNA ...........24130BUNA71 .......24330BUNA780 .....24330BUNA909 .....24330EPDM ...........24130EPDM-PW ......24130EPDM-TRI .......24130EPDM71 ........24330EPDM780 ......24330EPDM909 ......24330SILICONE ......24230VITON ..........24241BUNA ...........24141EPDM ...........24142BUNA ...........24142BUNA71 .......24342BUNA780 .....24342BUNA909 .....24342EPDM ...........24142EPDM-PW ......24142EPDM-TRI .......241

42EPDM71 ........24342EPDM780 ......24342EPDM909 ......24342SILICONE ......24242VITON ..........24251BUNA ...........24151EPDM ...........24152BUNA ...........24152BUNA ...........24152BUNA71 .......24352BUNA71 .......24352BUNA780 .....24352EPDM ...........24152EPDM ...........24152EPDM-PW ......24152EPDM-PW ......24152EPDM-TRI .......24152EPDM-TRI .......24152EPDM71 ........24352EPDM71 ........24352EPDM780 ......24352SILICONE ......24252SILICONE ......24252VITON ..........24252VITON ..........24253BUNA780 .....24353EPDM780 ......24361BUNA ...........24161EPDM ...........24162BUNA ...........24162BUNA71 .......24362BUNA780 .....24362EPDM ...........24162EPDM-PW ......24162EPDM-TRI .......24162EPDM71 ........24362EPDM780 ......24362SILICONE ......24262VITON ..........24263BUNA ...........24163BUNA71 .......24363BUNA780 .....24363BUNA909 .....24363EPDM ...........24163EPDM-PW ......24163EPDM-TRI .......24163EPDM71 ........24363EPDM780 ......24363EPDM909 ......24363SILICONE ......24263VITON ..........24280BUNA ...........24180BUNA71 .......24380BUNA780 .....24380BUNA909 .....24380EPDM ...........24180EPDM-PW ......24180EPDM-TRI .......24180EPDM71 ........24380EPDM780 ......24380EPDM909 ......24380SILICONE ......24280VITON ..........2421501145 ..........1361501151 ..........1361501181 ..........1361501197 ..........1361501221 ..........136

1501281 ..........1361501352 ..........1361501405 ..........1361501422 ..........1361501483 ..........1361501543 ..........1361501573 ..........1361501603 ..........1361501686 ..........1361501764 ..........1361501894 ..........1361502145 ..........1361502151 ..........1361502181 ..........1361502197 ..........1361502221 ..........1361502281 ..........1361502352 ..........1361502405 ..........1361502422 ..........1361502483 ..........1361502543 ..........1361502573 ..........1361502603 ..........1361502686 ..........1361502738 ..........1361502764 ..........1361502894 ..........136150738 ............136201LR00355 .....54201LR00406 .....54201M00034 .....54201M00042 .....54201M00048 .....54201M00060 .....54201M00073 .....54201M00076 .....54201M00089 .....54201M00108 .....54201M00114 .....54201M00133 .....54201M00139 .....54201M00141 .....54201M00159 .....54201M00165 .....54201M00168 .....54201M00219 .....54201M00273 .....54201M00324 .....54210LR0060 .......53210LR0073 .......53210LR0076 .......53210LR0089 .......53210LR0114 .......53210LR0139 .......53210LR0141 .......53210LR0165 .......53210LR0168 .......53210LR0219 .......53210LR0273 .......53210LR0324 .......53210LR0355 .......53210LR0406 .......53210M00034 .....52210M00042 .....52210M00048 .....52210M00060 .....52210M00073 .....52

210M00076 .....52210M00089 .....52210M00108 .....52210M00114 .....52210M00133 .....52210M00139 .....52210M00141 .....52210M00159 .....52210M00165 .....52210M00168 .....52210M00219 .....52210M00273 .....52210M00324 .....52211A00042 .....56211A00048 .....56211A00060 .....56211A00073 .....56211A00089 .....56211A00114 .....56211A00141 .....56211A00168 .....56211A00219 .....56211M00076 .....56211M00139 .....56211M00165 .....56212A00042 .....55212A00048 .....55212A00060 .....55212A00073 .....55212A00089 .....55212A00114 .....55212A00141 .....55212A00168 .....55212A00219 .....55212M00076 .....55212M00139 .....55219M00034 .....60219M00042 .....60219M00048 .....60219M00060 .....60219M00073 .....60219M00076 .....60219M00089 .....60219M00108 .....60219M00114 .....60219M00133 .....60219M00139 .....60219M00141 .....60219M00159 .....60219M00165 .....60219M00168 .....60219M00219 .....60219M00273 .....60219M00324 .....60219M00355 .....60219M00406 .....60221A03015 .....65221A05325 .....66221A05330 .....66221A05342 .....66221A08042 .....66221A08063 .....66221M01142 .....66221M01163 .....66221M01180 .....67221M02015 .....65221M02520 .....65221M02615 .....65

221M02620 .....65221M03010 .....65221M03020 .....65221M03025 .....65221M03026 .....65221M04220 .....65221M04225 .....65221M04226 .....65221M04230 .....65221M05230 .....65221M05242 .....66221M06230 .....66221M06242 .....66221M06320 .....66221M06325 .....66221M06326 .....66221M06330 .....66221M06342 .....66221M06352 .....66221M08052 .....66221M08062 .....66222M0139 .......61227M00042 .....61227M00048 .....61227M00060 .....61227M00073 .....61227M00076 .....61227M00089 .....61227M00108 .....61227M00114 .....61227M00168 .....61227M00219 .....61227M002732 .....61227M003242 .....6122V42262 ..........69250A01163 .....71250A01180 .....71250A01311 .....71250A01342 .....71250A01363 .....71250A01380 .....71250A01512 .....70250A03015 .....70250A06330 .....71250A08042 .....71250A08063 .....71250M01162 .....71250M01210 .....70250M01510 .....70250M02010 .....70250M02012 .....70250M02015 .....70250M02520 .....70250M02612 .....70250M02615 .....70250M02620 .....70250M03020 .....70250M03025 .....70250M03026 .....70250M04220 .....70250M04225 .....70250M04226 .....70250M04230 .....70250M05230 .....70250M05242 .....70250M05342 .....70250M06230 .....70250M06242 .....70

Part No. . . . .Page Part No. . . . .Page Part No. . . . .Page Part No. . . . .Page Part No. . . . .Page Part No. . . . .Page

= 1 for red paint finish (RAL 3000), 2 for hot dipped galvanised finish, or 5 for painted white RAL9010 coating (where available)


INDICES

Indices

279


250M06252 .....71250M06320 .....71250M06326 .....71250M06342 .....71250M06352 .....71250M06353 .....71250M08052 .....71250M08062 .....71251A03020 .....73251A03025 .....73251A04220 .....73251A04225 .....73251A04230 .....73251A05342 .....73251A06330 .....73251A06342 .....74251A06353 .....74260M00034 .....62260M00042 .....62260M00048 .....62260M00060 .....62260M00073 .....62260M00076 .....62260M00089 .....62260M00114 .....62260M00139 .....62260M00141 .....62260M00159 .....62260M00165 .....62260M00168 .....62260M00219 .....62260M00273 .....62260M00324 .....62301T00457 ......54301T00508 ......54301T00610 ......54304H000342 ......82304H000422 ......82304H000482 ......82304H000602 ......82304H000762 ......82304H000892 ......82305H000342 ......82305H000422 ......82305H000482 ......82305H000602 ......82305H000762 ......82305H000892 ......82310T00457 ......53310T00508 ......53310T00610 ......53311F00273 ......56311F00324 ......56311F00355 ......56311F00406 ......56311F00457 ......56311F00508 ......56311F00610 ......56312F00165 ......55312F00273 ......55312F00324 ......55312T00355 ......55312T00406 ......55312T00457 ......55312T00508 ......55312T00610 ......55314F00034 ......76314F00042 ......76

314F00048 ......76314F00060 ......76314F00076 ......76314F00089 ......76314F00114 ......76314F00139 ......76314F00165 ......76314F00168 ......76314F00219 ......76314F00273 ......76314F00324 ......76319T00457 ......60319T00508 ......60319T00610 ......60321F01152 ......66321F01162 ......66321F01311 ......67321F01330 ......67321F01342 ......67321F01352 ......67321F01362 ......67321F01363 ......67321F01380 ......67321F02010 ......65321F05226 ......65321F06220 ......66321F06226 ......66321T01411 ......67321T01413 ......67321T01442 ......67321T01463 ......67321T01480 ......67321T01611 ......67321T01613 ......67321T01614 ......67321T01642 ......67321T01663 ......67321T01680 ......67321T01811 ......67321T01813 ......68321T01814 ......68321T01816 ......68321T01863 ......67321T01880 ......67321T02111 ......68321T02113 ......68321T02114 ......68321T02116 ......68321T02118 ......68321T02163 ......68321T02180 ......68321T02411 ......68321T02413 ......68321T02414 ......68321T02416 ......68321T02418 ......68321T02421 ......68321T02480 ......68322F020202 .......69322F026202 .......69322F026252 .......69322F030202 .......69322F030252 .......69322F042202 .......69322F042262 .......69325F01042 ......77325F01052 ......77325F01063 ......77

325F01080 ......77325F01242 ......77325F01263 ......77325F01280 ......77325F03020 ......77325F03026 ......77325F04220 ......77325F04226 ......77325F04230 ......77325F05220 ......77325F05230 ......77325F05242 ......77325F06220 ......77325F06230 ......77325F06242 ......77325F06252 ......77325F06320 ......77325F06330 ......77325F06342 ......77325F06352 ......77325F08042 ......77325F08052 ......77325F08063 ......77327F00141 ......61327F00165 ......61341F00060 ......48341F00073 ......48341F00089 ......48341F00114 ......48341F00141 ......48341F00168 ......48341F00219 ......48341F00273 ......48341F00324 ......48341T00355 ......48341T00406 ......48341T00457 ......48341T00508 ......48341T00610 ......48343F00060 ......46343F00076 ......46343F00089 ......46343F00108 ......46343F00114 ......46343F00133 ......46343F00139 ......46343F00159 ......46343F00165 ......46343F00168 ......46343F00219 ......46343F00273 ......46343F00324 ......46343T00355 ......47343T00406 ......47343T00457 ......47343T00508 ......47343T00610 ......47344F00219 ......46344F00273 ......46344F00324 ......46344T00355 ......47344T00406 ......47344T00457 ......47344T00508 ......47344T00610 ......47350F01142 ......71350F01152 ......71350F01362 ......71

350F02610 ......70350F04241 ......70350F06361 ......71350F06362 ......71350F08053 ......71350T01411 ......72350T01413 ......72350T01462 ......71350T01463 ......71350T01480 ......71350T01611 ......72350T01613 ......72350T01614 ......72350T01680 ......72350T01813 ......72350T01814 ......72350T01816 ......72350T02111 ......72350T02113 ......72350T02114 ......72350T02116 ......72350T02118 ......72350T02411 ......72350T02413 ......72350T02414 ......72350T02416 ......72350T02418 ......72350T02421 ......72351F01142 ......74351F01152 ......74351F01153 ......74351F01162 ......74351F01163 ......74351F01180 ......74351F01342 ......74351F01362 ......74351F01363 ......74351F01380 ......74351F01411 ......74351F02010 ......73351F02012 ......73351F02015 ......73351F02615 ......73351F02620 ......73351F03026 ......73351F04226 ......73351F05230 ......73351F05242 ......73351F06220 ......73351F06230 ......73351F06242 ......73351F06252 ......73351F06320 ......73351F06352 ......74351F08030 ......74351F08042 ......74351F08052 ......74351F08053 ......74351F08062 ......74351F08063 ......74351T01411 ......75351T01413 ......75351T01462 ......74351T01463 ......74351T01480 ......75351T01611 ......75351T01613 ......75351T01614 ......75

351T01680 ......75351T01813 ......75351T01814 ......75351T01816 ......75351T02111 ......75351T02113 ......75351T02114 ......75351T02116 ......75351T02118 ......75351T02411 ......75351T02413 ......75351T02414 ......75351T02416 ......75351T02418 ......75351T02421 ......75360T00355 ......62360T00406 ......62360T00457 ......62360T00508 ......62360T00610 ......62361M00060 .....64361M00076 .....64361M00089 .....64361M00114 .....64361M00139 .....64361M00141 .....64361M00165 .....64361M00168 .....64361M00219 .....64361M00273 .....64362M00076 .....64362M00089 .....64362M00114 .....64362M00139 .....64362M00141 .....64362M00165 .....64362M00168 .....64362M00219 .....64362M00273 .....64363M00060 .....63363M00076 .....63363M00089 .....63363M00114 .....63363M00139 .....63363M00141 .....63363M00165 .....63363M00168 .....63363M00219 .....63364M00060 .....63364M00076 .....63364M00089 .....63364M00114 .....63364M00139 .....63364M00141 .....63364M00165 .....63364M00168 .....63364M00219 .....63365M00060 .....63365M00076 .....63365M00089 .....63365M00114 .....63365M00139 .....63365M00165 .....63365M00168 .....63365M00219 .....6339101-060 .........9539101-073 .........9539101-076 .........95

39101-089 .........9539101-114 .........9539101-139 .........9539101-141 .........9539101-165 .........9539101-168 .........9539101-219 .........9539101HV060 ......9439101HV073 ......9439101HV076 ......9439101HV089 ......9439101HV114 ......9439101HV139 ......9439101HV141 ......9439101HV165 ......9439101HV168 ......9439101HV219 ......9439101N-060 .......9639101N-073 .......9639101N-076 .......9639101N-089 .......9639101N-114 .......9639101N-139 .......9639101N-141 .......9639101N-165 .......9639101N-168 .......9639101N-219 .......9639107-089 .........9739107-114 .........9739107-139 .........9739107-141 .........9739107-165 .........9739107-168 .........9739107-219 .........9739107-273 .........9739107-324 .........97401H000344 ....151401H000424 ....151401H000484 ....151401H000604 ....151401H000764 ....151401H000894 ....151401H001144 ....151401H001394 ....151401H001684 ....151401H002194 ....151401H002734 ....151401H003244 ....151405MD00344 ...144405MD00424 ...144405MD00484 ...144405MD00604 ...144405MD00734 ...144405MD00764 ...144405MD00894 ...144405MD01144 ...144405MD01394 ...144405MD01414 ...144405MD01684 ...144405MD02194 ...144407GT00422 ....138407GT00482 ....138407GT00602 ....138407GT00732 ....138407GT00892 ....138407GT01142 ....138407T000212 .....138407T000262 .....138



www.grinnell.com

INDICES

Indices

280

407T000342 .....138407T000422 .....138407T000482 .....138407T000602 .....138407T000732 .....138407T000892 .....138407T001142 .....138410H000344 ....151410H000424 ....151410H000484 ....151410H000604 ....151410H000764 ....151410H000894 ....151410H001144 ....151410H001394 ....151410H001684 ....151410H002194 ....151410H002734 ....151410H003244 ....151419H000344 ....152419H000424 ....152419H000484 ....152419H000604 ....152419H000764 ....152419H000894 ....152419H001144 ....152419H001394 ....152419H001684 ....152419H002194 ....152419H002734 ....152419H003244 ....152421H011634 ....154421H011804 ....154421H013114 ....154421H013804 ....154421H020104 ....154421H020124 ....154421H020154 ....154421H026154 ....154421H026204 ....154421H030204 ....154421H030264 ....154421H042204 ....154421H042264 ....154421H042304 ....154421H052304 ....154421H052424 ....154421H063204 ....154421H063264 ....154421H063304 ....154421H063424 ....154421H063524 ....154421H080424 ....154421H080524 ....154421H080634 ....154443H000424 ....150443H000484 ....150443H000604 ....150443H000764 ....150443H000894 ....150443H001144 ....150443H001394 ....150443H001684 ....150444H002194 ....150444H002734 ....150444H003244 ....150450H011634 ....155450H011804 ....155

450H012104 ....155450H013114 ....155450H013804 ....155450H015104 ....155450H015124 ....155450H020154 ....155450H026154 ....155450H026204 ....155450H030154 ....155450H030204 ....155450H030264 ....155450H042204 ....155450H042264 ....155450H042304 ....155450H052304 ....155450H052424 ....155450H063424 ....155450H063524 ....155450H080424 ....155450H080524 ....155450H080634 ....155460H000344 ....153460H000424 ....153460H000484 ....153460H000604 ....153460H000764 ....153460H000894 ....153460H001144 ....153460H001394 ....153460H001684 ....153460H002194 ....153460H002734 ....153460H003244 ....153472MD00424 ...142472MD00484 ...142472MD00604 ...142472MD00734 ...142472MD00764 ...142472MD00894 ...142472MD01144 ...142472MD01394 ...142472MD01414 ...142472MD01684 ...142472MD02194 ...142472MD02734 ...142472MD03244 ...142595900020 ......108595900025 ......108595900030 ......108595900040 ......108595900050 ......108595900060 ......108595900076 ......108595900080 ......108595900100 ......108595900120 ......108595900139 ......108595900165 ......10870006B ............24070006E ............24070008B ............24070008E ............24070009B ............24070009E ............24070010B ............24070010E ............24070011B ............24070011E ............240

70013B ............24070013E ............24070015B ............24070015E ............240705ME0034 .....24705ME0042 .....24705ME0048 .....24705ME0060 .....24705ME0073 .....24705ME0076 .....24705ME0089 .....24705ME0108 .....24705ME0114 .....24705ME0133 .....24705ME0139 .....24705ME0141 .....24705ME0159 .....24705ME0165 .....24705ME0168 .....24705ME0219 .....24705ME0273 .....24705ME0324 .....24705MES042R ....147705MES048R ....147705MES060R ....147705MES076R ....147705MES089R ....147705MES114R ....147705MES139R ....147705MES141R ....147705MES165R ....147705MES168R ....147705MES219R ....147705MT0034 .....24705MT0042 .....24705MT0048 .....24705MT0060 .....24705MT0073 .....24705MT0076 .....24705MT0089 .....24705MT0108 .....24705MT0114 .....24705MT0133 .....24705MT0139 .....24705MT0141 .....24705MT0159 .....24705MT0165 .....24705MT0168 .....24705MT0219 .....24705MT0273 .....24705MT0324 .....247060751 ..........1187060752 ..........1187060753 ..........1187060754 ..........1187060755 ..........1187060756 ..........1187060757 ..........1187060758 ..........118707AE0034 ......26707AE0048 ......26707AE0060 ......26707AE0073 ......26707AE0076 ......26707AE0089 ......26707AE0114 ......26707AE0139 ......26707AE0141 ......26

707AE0165 ......26707AE0168 ......26707AE0219 ......27707AE0273 ......27707AE0324 ......27707AE0355 ......27707AE0406 ......27707AE0457 ......27707AE0508 ......27707AE0610 ......27707ME0042 .....26716AE2015 ......33716AE2520 ......33716AE3020 ......33716AE3025 ......33716AE4220 ......33716AE4225 ......33716AE4230 ......33716AE5342 ......33716AE6342 ......33716AE6353 ......33716AE8063 ......33716ME2620 .....33716ME3026 .....33716ME4226 .....33716ME5242 .....33716ME6242 .....3371AAE0060 .....4271AAE0073 .....4271AAE0089 .....4271AAE0114 .....4271AAE0141 .....4271AAE0168 .....4271AAE0219 .....4271AAE0273 .....4271AAE0324 .....4271AAE0355 .....4371AAE0406 .....4371AAE0457 .....4371AAE0508 .....4371AAE0609 .....4371DAE0060 ......4171DAE0076 ......4171DAE0089 ......4171DAE0114 ......4171DAE0165 ......4171DAE0168 ......4171DAE0273 ......4171DAE8273 ......4171DME0139 .....4171DME0219 .....4171DME0324 .....4171DME8219 .....4171DME8324 .....417289920 ..........1947289930 ..........1947289940 ..........1947289960 ..........1947289980 ..........1947290020E ........1827290030E ........1827290040E ........1827290040HE ......1827290040LE .......1827290060E ........1827290060HE ......1827290060LE .......1827290080E ........182

7290080HE ......1827290080LE .......1827290420 ..........1837290430 ..........1837290440 ..........1837290440H ........1837290460 ..........1837290460H ........1837290480 ..........1837290480H ........1837290520 ..........1837290530 ..........1837290540 ..........1837290560 ..........1837290580 ..........1837290620 ..........1857290630 ..........1857290640 ..........1857290660 ..........1857290680 ..........1857290720 ..........1867290730 ..........1867290740 ..........1867290740H ........1867290760 ..........1867290760H ........1867290780 ..........1867290820 ..........1867290830 ..........1867290840 ..........1867290860 ..........1867290880 ..........1867290920 ..........1877290930 ..........1877290940 ..........1877290960 ..........1877290980 ..........1877291020 ..........1887291030 ..........1887291040 ..........18872910460 ........1887291080 ..........1887291140 ..........1877291160 ..........1877291180 ..........1877291220 ..........1887291230 ..........1887291240 ..........1887291260 ..........1887291280 ..........1887291320 ..........18972913240H ......1897291330 ..........1897291340 ..........1897291360 ..........1897291360H ........1897291380 ..........1897291420 ..........1897291430 ..........1897291440 ..........1897291440H ........1897291460 ..........1897291460H ........1897291480 ..........1897291520 ..........1907291530 ..........1907291540 ..........1907291560 ..........190

7291580 ..........1907291620 ..........1907291630 ..........1907291640 ..........1907291660 ..........1907291680 ..........1907291720 ..........1917291730 ..........1917291740 ..........1917291760 ..........1917291780 ..........191729183020 ......191729184020 ......191729184030 ......191729186020 ......191729186030 ......191729186040 ......191729188060 ......191729194020 ......184729194030 ......184729196020 ......184729196030 ......184729196040 ......184729198020 ......184729198040 ......184729198060 ......184729302010 ......185729302075 ......185729303010 ......185729303015 ......185729303075 ......185729304010 ......185729304015 ......185729304075 ......185729306010 ......185729306015 ......185729306075 ......185729308010 ......185729308015 ......185729402010 ......184729402075 ......184729403015 ......184729404015 ......184729406015 ......184729408020 ......1847299920 ..........1937299930 ..........1937299940 ..........1937299940H ........1937299960 ..........1937299960H ........1937299980 ..........193730AT2005 ......85730AT2007 ......85730AT2010 ......85730AT2012 ......85730AT2015 ......85730AT2505 ......85730AT2507 ......85730AT2510 ......85730AT2512 ......85730AT2515 ......85730AT2605 ......85730AT2607 ......85730AT2610 ......85730AT4212 ......86730AT4215 ......86730AT6215 ......87





INDICES

Indices

281

730AT6220 ......87730AT6226 ......87730AT6230 ......87730AT6315 ......87730AT6320 ......87730AT6326 ......87730AT6330 ......87730AT8020 ......87730AT8026 ......87730AT8030 ......87730MT2520 .....85730MT2612 .....85730MT2615 .....85730MT2620 .....85730MT3005 .....86730MT3007 .....86730MT3010 .....86730MT3012 .....86730MT3015 .....86730MT3020 .....86730MT4205 .....86730MT4207 .....86730MT4210 .....86730MT4220 .....86730MT4226 .....86730MT4230 .....86730MT5315 .....86730MT5320 .....86730MT5326 .....86730MT5330 .....86730MT6212 .....86730MT6312 .....8774020EPDME ....24174020NITRILS ...24174025EPDME ....24174025NITRILS ...24174030EPDME ....24174030NITRILS ...24174040EPDME ....24174040NITRILS ...24174050EPDME ....24174050NITRILS ...24174060EPDME ....24174060NITRILS ...24174080EPDME ....24174080NITRILS ...241740AE0060* ......22740AE0073* ......22740AE0089* ......22740AE0114* ......22740AE0141* ......22740AE0168* ......22740AE0219* ......22740ME0076* ......22740ME0139* ......22740ME0165* ......22760F00060.......120760F00073.......120760F00076.......120760F00088.......120760F00114.......120760F00139.......120760F00165.......120760F00168.......120760F00219.......120760F00273.......120760F00324.......120770AE0060 ......25

770AE0073 ......25770AE0089 ......25770AE0114 ......25770AE0168 ......25770AE0219 ......25770AE0273 ......25770AE0324 ......25772AE0355 ......21772AE0355 ......21772AE0406 ......21772AE0406 ......21772AE0457 ......21772AE0457 ......21772AE0508 ......21772AE0508 ......21772AE0610 ......21772AE0610 ......21772ME0042 .....20772ME0048 .....20772ME0060 .....20772ME0073 .....20772ME0076 .....20772ME0089 .....20772ME0114 .....20772ME0139 .....20772ME0141 .....20772ME0165 .....20772ME0168 .....20772ME0219 .....20772ME0273 .....21772ME0324 .....21772MT0042 .....20772MT0048 .....20772MT0060 .....20772MT0073 .....20772MT0076 .....20772MT0089 .....20772MT0114 .....20772MT0139 .....20772MT0141 .....20772MT0165 .....20772MT0168 .....20772MT0219 .....20772MT0273 .....21772MT0324 .....21774ME0034 .....23774ME0042 .....23774ME0048 .....23774ME0060 .....23774ME0073 .....23774ME0076 .....23774ME0089 .....23774ME0114 .....23774ME0139 .....23774ME0141 .....23774ME0165 .....23774ME0168 .....23774ME0219 .....23774ME0273 .....23774ME0324 .....23774MT0034 .....23774MT0042 .....23774MT0048 .....23774MT0060 .....23774MT0073 .....23774MT0076 .....23774MT0089 .....23774MT0114 .....23

774MT0139 .....23774MT0141 .....23774MT0165 .....23774MT0168 .....23774MT0219 .....23774MT0273 .....23774MT0324 .....23780AE0048 ......31780AE0060 ......31780AE0073 ......31780AE0076 ......31780AE0089 ......31780AE0114 ......31780AE0139 ......31780AE0141 ......31780AE0165 ......31780AE0168 ......31780AE0219 ......318000B ..............240909440ES ........168909460ES ........168909480ES ........168909510ES ........165909512ES ........165909514ES ........165909516ES ........165909518ES ........165909520ES ........165909521ES ........165909530ES ........165909540ES ........165909560ES ........165909580ES ........165909710ES ........167909712ES ........167909720ES ........167909730ES ........167909740ES ........167909760ES ........167909780ES ........167909AE0060 ......30909AE0060 ....198909AE0073 ......30909AE0073 ....198909AE0076 ......30909AE0076 ....198909AE0089 ......30909AE0089 ....198909AE0114 ......30909AE0114 ....198909AE0165 ......30909AE0165 ....198909AE0168 ......30909AE0168 ....198909AE0219 ......30909AE0219 ....198909AE0273 ......30909AE0273 ....198ALG0034 ..........131ALG0042 ..........131ALG0048 ..........131ALG0060 ..........131ALG0073 ..........131ALG0076 ..........131ANS0089 .........132ANS0114 .........132ANS0139 .........132ANS0141 .........132

ANS0165 .........132ANS0168 .........132ANS0219 .........132B820020 ..........192B820030 ..........192B820040 ..........192B820060 ..........192B820080 ..........192BUNA2015 .......244BUNA2520 .......244BUNA2620 .......244BUNA3020 .......244BUNA3025 .......244BUNA3026 .......244BUNA4220 .......244BUNA4225 .......244BUNA4226 .......244BUNA4230 .......244BUNA5242 .......244BUNA5342 .......244BUNA6242 .......244BUNA6342 .......244BUNA6553 .......244BUNA8063 .......244CB8000505 ......112CB8000755 ......112CB8001005 ......112CB8001103 ......115CB8001104 ......113CB8001106 ......114CB8001203 ......115CB8001204 ......113CB8001206 ......114CB8001255 ......112CB8001394 ......113CB8001505 ......112CB8001654 ......113CB8002005 ......112CB8002503 ......115CB8002504 ......113CB8002506 ......114CB8003003 ......115CB8003004 ......113CB8003006 ......114CB8004003 ......115CB8004004 ......113CB8004006 ......114CB8005003 ......115CB8005004 ......113CB8005006 ......114CB8006003 ......115CB8006004 ......113CB8006006 ......114CB8007604 ......113CB8008003 ......115CB8008004 ......113CB8008006 ......114CLIP0103 ............37CLIP0406 ............37CLIP0812 ............37EPDM2015 ........244EPDM2520 ........244EPDM2620 ........244EPDM3020 ........244EPDM3025 ........244EPDM3026 ........244EPDM4220 ........244EPDM4225 ........244

EPDM4226 ........244EPDM4230 ........244EPDM5242 ........244EPDM5342 ........244EPDM6242 ........244EPDM6342 ........244EPDM6553 ........244EPDM8063 ........244FSF0050E .........133FSF0065E .........133FSF0080E .........133FSF0100E .........133FSF0125E .........133FSF0150E .........133FSF0200E .........133FSF0250E .........133FSF0300E .........133FSF1200E .........133FSF1250E .........133FSF1300E .........133FTU020E ...........132FTU025E ...........132FTU032E ...........132FTU040E ...........132GAUGE ............226GRINTAPE .........225GROO10A-UK ...223GROOVER 01 ....223GROOVER 02 ....223GROOVER 10A .223HCTOOL ...........224HOLESAW114 ...224HOLESAW22 .....224HOLESAW24 .....224HOLESAW25 .....224HOLESAW35 .....224HOLESAW38 .....224HOLESAW44 .....224HOLESAW50 .....224HOLESAW63 .....224HOLESAW70 .....224HOLESAW89 .....224HOLESAWCP .....224HOLESAWCP .....224HOLESAWCP .....224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWCP5 ...224HOLESAWDP .....224HOLESAWDP .....224INS060M ............44INS073M ............44INS089M ............44INS114M ............44INS141M ............44INS168M ............44INS219M ............44INS273M ............44INS324M ............44INS355M ............44INS406M ............44INS457M ............44INS508M ............44

INS609M ............44INSDIN060M ......44INSDIN076M ......44INSDIN089M ......44INSDIN114M ......44INSDIN139M ......44INSDIN165M ......44INSDIN168M ......44INSDIN219M ......44INSDIN273M ......44INSDIN324M ......44ITGM 36 ...........193ITGM 8 .............193K010000734 ....119K015000894 ....119K020000894 ....119K025001144 ....119K030001144 ....119K045001144 ....119K050001414 ....119K075001684 ....119K100001684 ....119K125001684 ....119K150002194 ....119K200002194 ....119K250002194 ....119K300002194 ....119K350002734 ....119K400002734 ....119K450002734 ....119K500003244 ....119PUNCH .............225RJ-624 ..............223RXAG034 .........130RXAG042 .........130RXAG048 .........130RXAG060 .........130RXAG073 .........130RXAG076 .........130RXAG089 .........130RXAG114 .........130RXAG139 .........130RXAG141 .........130RXAG165 .........130RXAG168 .........130RXAG219 .........130RXAG273 .........130STAND ..............223UFBX1-034 ........134UFBX1-042 ........134UFBX1-048 ........134UFBX1-060 ........134UFBX1-076 ........134UFBX1-089 ........134UFBX1-114 ........135UFBX1-139 ........135UFBX1-168 ........135UFBX1-219 ........135UFBX1-273 ........135VR69-252 .........240ZKLM024 ..........225




www.grinnell.com

INDICES

Indices

282

Figure Number Index(Page 1 of 2)

Figure Number . . . . . . . . . . . . . . . . . . . . . . . . Page Keywords . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page

Figure 10EP 90° EP Elbows . . . . . . . . . . . . . . . . . . . . . 172Figure 11EP 45° EP Elbows . . . . . . . . . . . . . . . . . . . . . 172Figure 20EP EP Tee . . . . . . . . . . . . . . . . . . . . . . . . . . . 173Figure 22EP EP Header Tee . . . . . . . . . . . . . . . . . . . . . 174Figure 35EP EP Cross . . . . . . . . . . . . . . . . . . . . . . . . . . 173Figure 71 Flange Adapters (ANSI) . . . . . . . . . . . . . . . 42 - 43Figure 71 Flange Adapters (PN10/PN16) . . . . . . . . . . . . 41Figure 201 - 45° Elbows . . . . . . . . . . . . . . . . . . . . . . . . 54Figure 201LR - 45° Long Radius Elbows . . . . . . . . . . . . . . 54Figure 210 - 90° Elbows . . . . . . . . . . . . . . . . . . . . . . . . 52Figure 210LR - 90° Long Radius Elbows . . . . . . . . . . . . . . 53Figure 211 - 111⁄4° Elbows . . . . . . . . . . . . . . . . . . . . . . . 56Figure 212 - 221⁄2° Elbows . . . . . . . . . . . . . . . . . . . . . . . 55Figure 219 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Figure 221 Reducing Tees . . . . . . . . . . . . . . . . . . . . 65 - 68Figure 222 Hydrant Tee . . . . . . . . . . . . . . . . . . . . . . . . . 69Figure 227 Cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61Figure 250 Concentric Reducers . . . . . . . . . . . . . . . . 70 - 72Figure 251 Eccentric Reducers . . . . . . . . . . . . . . . . . 73 - 75Figure 260 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 62Figure 301 - 45° Elbows . . . . . . . . . . . . . . . . . . . . . . . . 54Figure 304 Nipple, Machined, Groove x Male Thread . . . . 82Figure 305 Nipple, Machined, Groove x Female Thread . . 82Figure 310LR - 90° Long Radius Elbows . . . . . . . . . . . . . . 53Figure 311 - 111⁄4° Elbows . . . . . . . . . . . . . . . . . . . . . . . 56Figure 312 - 221⁄2° Elbows . . . . . . . . . . . . . . . . . . . . . . . 55Figure 314 - 45° Laterals . . . . . . . . . . . . . . . . . . . . . . . . 76Figure 319 Tees . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60Figure 321 Reducing Tees . . . . . . . . . . . . . . . . . . . . 65 - 68Figure 322 Reducing Tees . . . . . . . . . . . . . . . . . . . . . . . 69Figure 325 - 45° Reducing Laterals . . . . . . . . . . . . . . . . . 77Figure 330 Tee Wyes . . . . . . . . . . . . . . . . . . . . . . . 78 - 79Figure 331 Reducing Tee Wyes . . . . . . . . . . . . . . . . . . . . 80Figure 341 Flange Adapters (ANSI) . . . . . . . . . . . . . . . . . 48Figure 343 Flange Adapters (PN10/PN16) . . . . . . . . 46 - 47Figure 344 Flange Adapters (PN10) . . . . . . . . . . . . . 46 - 47Figure 350 Concentric Reducers . . . . . . . . . . . . . . . . 70 - 72Figure 351 Eccentric Reducers . . . . . . . . . . . . . . . . . 73 - 75Figure 360 End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 62Figure 361 thru 365 End Caps with Threaded Outlet . . 63 - 64Figure 391 Adapter Nipples, Groove x Thread . . . . . . . . . 81Figure 392 Adapter Nipples, Groove x Groove . . . . . . . . 81Figure 393 Adapter Nipples, Groove x Bevel . . . . . . . . . . 81Figure 401 - 45° Stainless Steel Elbows . . . . . . . . . . . . . 151Figure 405 Stainless Steel Flexible Couplings . . . . . . . . . 144Figure 407GT Dielectric Waterways . . . . . . . . . . . . . . . 138Figure 407T Dielectric Waterways . . . . . . . . . . . . . . . . . 138Figure 410 - 90° Stainless Steel Elbows . . . . . . . . . . . . . 151Figure 419 Tees, SS . . . . . . . . . . . . . . . . . . . . . . . . . . 152Figure 421 Reducing Tees, SS . . . . . . . . . . . . . . . . . . . 154Figure 443 Flange Adapters (PN16), SS . . . . . . . . . . . . 150Figure 444 Flange Adapters (PN10), SS . . . . . . . . . . . . 150Figure 450 Concentric Reducers, SS . . . . . . . . . . . . . . . 155Figure 460 End Caps, SS . . . . . . . . . . . . . . . . . . . . . . 153Figure 472 Stainless Steel Rigid Couplings . . . . . . . . . . . 142Figure 702 Mechanical Outlet Couplings . . . . . . . . . . 34 - 35Figure 705 Flexible Couplings . . . . . . . . . . . . . . . . . . . . 24Figure 705R Rilsan Coated Flexible Coupling . . . . . . . . . 147Figure 707 Heavy Duty Flexible Couplings . . . . . . . . . 26 - 27Figure 707L Large Diameter Couplings . . . . . . . . . . . . . . . 28

Figure 716 Flexible Reducing Couplings. . . . . . . . . . . . . . 33Figure 730 Mechanical Tees – Grooved . . . . . . . . . . . 88 - 90Figure 730 Mechanical Tees – Threaded . . . . . . . . . . 85 - 87Figure 740 Rapid Installation Pivot-Bolt Rigid Couplings . . . 22Figure 760 WYE-Strainer . . . . . . . . . . . . . . . . . . . . . . . 120Figure 770 High Pressure Rigid Couplings . . . . . . . . . . . . 25Figure 772 Rigid Couplings . . . . . . . . . . . . . . . . . . . 20 - 21Figure 774 Rigid Couplings . . . . . . . . . . . . . . . . . . . . . . 23Figure 780 Grooved Snap Couplings. . . . . . . . . . . . . . . . 31Figure 901 - 45° Plain End Elbows . . . . . . . . . . . . . . . . 199Figure 901LR - 45° Plain End Long Radius Elbows . . . . . . 200Figure 909 Plain End Couplings . . . . . . . . . . . . . . . 30, 198Figure 910 - 90° Plain End Elbows . . . . . . . . . . . . . . . . 199Figure 910LR - 90° Plain End Long Radius Elbows . . . . . . 200Figure 914 Plain End Laterals . . . . . . . . . . . . . . . . . . . . 203Figure 919 Plain End Tees . . . . . . . . . . . . . . . . . . . . . . 201Figure 921 Plain End Reducing Tees . . . . . . . . . . . . . . . 203Figure 924 Plain End True Wyes . . . . . . . . . . . . . . . . . . 202Figure 927 Plain End Crosses . . . . . . . . . . . . . . . . . . . . 201Figure 941 Plain End Flange Adapters (ANSI 150#) . . . . 206Figure 942 Plain End Flange Adapters (ANSI 300#) . . . . 206Figure 960 Plain End Caps . . . . . . . . . . . . . . . . . . . . . . 202Figure 991 Plain End Adapter Nipples, Plain x Thread . . . 205Figure 992 Plain End Adapter Nipples, Plain x Groove . . 205Figure 993 Plain End Adapter Nipples, Plain x Bevel . . . . 205Figure 999 Plain End Swaged Nipples . . . . . . . . . . . . . . 204Figure 7550 Expansion Joint . . . . . . . . . . . . . . . . . 124 - 129Figure 7706-T Transition Couplings . . . . . . . . . . . . . . . . . 36Figure 7707N Large Diameter Flexible Couplings . . . . . . . 29Figure 9094 HDPE Flange Couplings . . . . . . . . . . . . . . . 168Figure 9095 HDPE Couplings . . . . . . . . . . . . . . . 165 - 166Figure 9097 HDPE Transition Couplings . . . . . . . . . . . . . 167Figure 39101 Butterfly Valve Lever Op. Potable Water . . . . 95Figure 39101HV Butterfly Valve, Lever Op., HVAC . . . . . . 94Figure 39101N Butterfly Valves Lever Op. Nitrile Disc . . . . 96Figure 39107 Butterfly Valves Gear Op. Potable Water . . . 97Figure 70607 Groove End Metering Station . . . . . . . . . . 118Figure 72899 Replacement Gaskets, G-MINE . . . . . . . . 194Figure 72900 SDR Pipe, G-MINE . . . . . . . . . . . . . . . . . 182Figure 72904 Couplings, G-MINE . . . . . . . . . . . . . . . . 183Figure 72905 Couplings (Spline x Solvent Weld), G-MINE 183Figure 72906 Nipples (Spline x Plain End), G-MINE . . . . 185Figure 72907 Nipples (Spline x Groove), G-MINE . . . . . 186Figure 72908 Nipples (Spline x Male Thread), G-MINE . 186Figure 72909 Nipples (Plain End x Male Thread), G-MINE 187Figure 72910 90° Elbows, G-MINE . . . . . . . . . . . . . . . 188Figure 72911 Nipples, G-MINE . . . . . . . . . . . . . . . . . . 187Figure 72912 - 45° Elbows, G-MINE . . . . . . . . . . . . . . 188Figure 72913 - 90° Sweep Elbows, G-MINE . . . . . . . . . 189Figure 72914 - 45° Sweep Elbows, G-MINE . . . . . . . . . 189Figure 72915 Caps & Plugs, G-MINE . . . . . . . . . . . . . . 190Figure 72916 Flange Adapters, G-MINE . . . . . . . . . . . . 190Figure 72917 Tees, G-MINE . . . . . . . . . . . . . . . . . . . . 191Figure 72918 Reducing Tees, G-MINE . . . . . . . . . . . . . 191Figure 72919 Reducing Couplings (Male Spline x Female Spline), G-MINE . . . . . . . . . . . . . 184Figure 72930 Outlet Couplings (Spline x Spline x Female Thread), G-MINE . . . . . . . . . . 185Figure 72940 Outlet Couplings (Male Spline x Female Spline x Female Thread), G-MINE 184Figure 72999 Splines, G-MINE . . . . . . . . . . . . . . . . . . 193


INDICES

Indices

283

Figure ALG Expansion Joint . . . . . . . . . . . . . . . . . . . . . 131Figure ANS Expansion Joint . . . . . . . . . . . . . . . . . . . . . 132Figure B333 Large Diameter Butterfly Valve . . . . . . 100 - 101Figure B8101 Low Profile Butterfly Valves . . . . . . . . . . . . . 99Figure B8200L G-MINE Butterfly Valves . . . . . . . . . . . . . 192Figure BV835 Ball Valves . . . . . . . . . . . . . . . . . . . 102 - 103Figure CB800 Circuit Bal. Valves Threaded Ends . . . . . . . 112Figure CB800 Circuit Bal. Valves Flanged Ends, (ANSI) . . . 115Figure CB800 Circuit Bal. Valves Flanged Ends, (PN16/10) 114Figure CB800 Circuit Bal. Valves Grooved Ends . . . . . . . 113Figure CB800 Circuit Bal. Valves Insulation Kits . . . . . . . . 117Figure CB800 Circuit Bal. Valves Measuring Computer . . 117Figure CB800 Circuit Bal. Valves Solder Ends . . . . . . . . . 116Figure CV-1 Grooved End Check Valves . . . . . . . . . 107 - 108Figure CV-1 Pressure Loss Data . . . . . . . . . . . . . . . . . . . 108Figure FAZ II Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . 137Figure FSF Flanged Rubber Bellows . . . . . . . . . . . . . . . . 133Figure FTU Rubber Bellows ISO R7 Threaded . . . . . . . . . 132Figure HCTOOL Hole Cutting Tool . . . . . . . . . . . . . . . . . 224Figure HERCULES Fix Point . . . . . . . . . . . . . . . . . . . . . . 136Figure ITGM Insertion Tools, G-MINE . . . . . . . . . . . . . . 193Figure PUNCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 225Figure R-88 Ring Joint Couplings . . . . . . . . . . . . . . 210 - 211Figure R-88 Ring Joint Couplings Large Diameter . . . . . . . 212Figure RH-1000 - 1000 PSI Ring Joint Couplings . . . . . . . 213Figure RJ-10 - 90° Ring Joint Elbows. . . . . . . . . . . . . . . . 216Figure RJ-11 - 45° Ring Joint Elbows. . . . . . . . . . . . . . . . 217Figure RJ-20 Ring Joint Tee . . . . . . . . . . . . . . . . . . . . . . 217Figure RJ-21 Reducing Tees . . . . . . . . . . . . . . . . . . . . . . 218Figure RJ-50 Concentric Reducer . . . . . . . . . . . . . . . . . . 219

Figure RJ-51 Eccentric Reducer . . . . . . . . . . . . . . . . . . . 219Figure RJ-60 Ring Joint Cap . . . . . . . . . . . . . . . . . . . . . 220Figure RJ-70 Flange Adapter . . . . . . . . . . . . . . . . . . . . . 220Figure RX-3000 - 3000 PSI Ring Joint Couplings . . . . . . . 214Figure RX-3770 - 3770 PSI Ring Joint Couplings . . . . . . . 215Figure RXAG Expansion Joint . . . . . . . . . . . . . . . . . . . . 130Figure S35 Shouldered Flexible Coupling . . . . . . . . . . . . 177Figure S810 Suction Diffusers . . . . . . . . . . . . . . . . 122 - 123Figure S855 Tee Strainers . . . . . . . . . . . . . . . . . . . . . . . 121Figure SD-28 Shouldered Toggle Coupling . . . . . . . . . . . 178Figure SJ-200 Low Profile Butterfly Valve . . . . . . . . . . . . . . 98Figure SJ-400 Butterfly Valve . . . . . . . . . . . . . . . . . 156 - 157Figure SJ-500L Ball Valve . . . . . . . . . . . . . . . . . . . . . . . 104Figure SJ-500W Ball Valve Gear Operated . . . . . . . . . . . 105Figure SJ-530 Ball Valve (3 Port) . . . . . . . . . . . . . . . . . . 106Figure SJ-600L Ball Valve (Lever) . . . . . . . . . . . . . . . . . . 158Figure SJ-600W Ball Valve (Gear) . . . . . . . . . . . . . . . . . 159Figure SJ-630 Three Port Ball Valve . . . . . . . . . . . . . . . . 160Figure SJ-726 Y Strainer . . . . . . . . . . . . . . . . . . . . . . . . 161Figure SJ-915 Dual Disc Check Valves . . . . . . . . . . 109 - 110Figure SS-28 Stainless Steel Hinged Lever Coupling . . . . . 148Figure SS-41 Flange Adapters (ANSI), SS . . . . . . . . . . . 149Figure SS-723 Mechanical Tee . . . . . . . . . . . . . . . . . . . 162Figure SS-1200 SS, High Pressure Flexible Couplings. . . . 146Figure SS-7X Stainless Steel Rigid Couplings (Large Dia.) . 143Figure SS-8X Stainless Steel Heavy Duty Flexible Coupling 145Figure UFBX Flexible Hoses . . . . . . . . . . . . . . . . . . 134 - 135Figure Venturi, Flow Meter Butt Weld with Grooved Ends . 119Figure XH-70EP Extra Heavy Rigid Couplings (EP) . . . 32, 171

Figure Number Index(Page 2 of 2)

10-Year Limited Warranty


Limited Warranty

Products manufactured by Tyco International (Tyco) under the GRINNELL brand are warranted solely to the original Buyer for ten (10) years against defects in material and workmanship when paid for and properly installed and maintained under normal use and service, except for the G-MINE line of products, which are warranted solely to the original Buyer for six (6) months against defects in material and workmanship when paid for and properly installed and maintained under normal use and service. This warranty will expire ten (10) years from date of shipment by Tyco. No warranty is given for products or components manufactured by companies not affiliated by ownership with Tyco or for products and components which have been subject to misuse, improper installation or maintenance, corrosion, or other external sources of damage. Materials found by Tyco to be defective shall be either repaired or replaced, at Tyco’s sole option. Tyco neither assumes, nor authorizes any person to assume for it, any other obligation in connection with the sale of products or parts of products. Tyco shall not be responsible for system design errors or inaccurate or incomplete information supplied by Buyer or Buyer’s representatives.

In no event shall Tyco be liable, in contract, tort, strict liability or under any other legal theory, for incidental, indirect, special or consequential damages, including but not limited to labor charges, regardless of whether Tyco was informed about the possibility of such damages, and in no event shall Tyco’s liability exceed an amount equal to the sales price.

The foregoing warranty is made in lieu of any and all other warranties, express or implied, including warranties of merchantability and fitness for a particular purpose.

This Limited Warranty sets forth the exclusive remedy for claims based on failure of or defect in products, materials or components, whether the claim is made in contract, tort, strict liability or any other legal theory.

This warranty will apply to the full extent permitted by law. The invalidity, in whole or part, of any portion of this warranty will not affect the remainder.

Regional Offices EMEA:

Austria (Vienna)

Tel: +43 (0)1 271 0049Fax: +43 (0)1 271 0142

Belgium (Mechelen)

Tel: +32 (0)15 285 555Fax: +32 (0)15 206 076

Czech Republic (Liberec)

Tel: + 420 482 736 291Fax: + 420 482 736 293

France (Paris)

Tel: +33 (0)1 48 178 727Fax: +33 (0)1 48 178 720

Germany (Rodgau)

Tel: +49 (0)6 106 84455Fax: +49 (0)6 106 18177

Hungary (Budapest)

Tel: +36 (0)1 481 1383Fax: +36 (0)1 203 4427

Italy (Milan)

Tel: +39 (0)331 583 000Fax: +39 (0)331 583 030

Norway (Lørenskog)

Tel: +47 6791 7700Fax: +47 6791 7715

Russia

Tel: +31 (0)53 428 4444Fax: +31 (0)53 428 3377

Spain (Madrid)

Tel: +34 (0)91 380 74 60Fax: +34 (0)91 380 74 61

Sweden (Lammhult)

Tel: +46 (0)472 269 980Fax: +46 (0)472 269 989

The Netherlands (Enschede)

Tel: +31 (0)53 428 4444Fax: +31 (0)53 428 3377

Turkey (Ankara)

Tel: +90 312 473 70 11Fax: +90 312 473 73 92

United Arab Emirates (Dubai)

Tel: +971 (0)4 883 8689Fax: +971(0)4 883 8674

UK & Ireland (Manchester)

Tel: +44 (0)161 2594 000Fax: +44 (0)161 8750 491

Copyright © 2013 Tyco Fire Products LP. All rights reserved.

www.grinnell.com

Documents

Grinnell Quick Up Pipes & Fittings for Piping Installation Catalog 2013