ThinkGreen ActGreen GoGreen

1Take the Z- Wave

Z- WAVE MASTER CONTROLLER

NQ-900 | Wireless Z-Wave Router

›› Great price/performance›› Broadband Router with Wi-Fi 802.11G›› Built in Z-Wave sensor interface module for home automation control›› Built in web interface for controlling Z-Wave devices›› Compatible with Danish Saving Trust’s portal›› Two USB ports for adding USB modem dongle, external hard disk etc.›› Built in Ethernet and›› Built in Ethernet and Wi-Fi 802.11G connection›› Compatible with Danish Saving Trust’s portal›› Compatible with EU Alarm surveillance portal›› WPS button for easy WIFI set-up between camera and Z-Wave gateway›› Fully supports Huawei E220 USB MODEM

The NQ-900 Wireless Z-Wave Router is also a monitoring gateway and can be used to control Z-Wave devices located throughout the home or business. The NQ-900 enables remote access and control over Z-Wave devices.

NQ-9006 | Personal WIFI Camera

›› Great price/performance›› Built in Ethernet and Wi-Fi 802.11G connection›› 30 Frames per second›› 3G Live Streaming›› Resolution up to 640*480›› 2-Way audio streaming (built in microphone)›› Priva›› Privacy button to disconnect lens›› WPS button for easy WIFI set-up between camera and Z-Wave Gateway›› Dual hardware codec support for MPEG4/M-JPG (motion jpeg)›› CMS (Camera Management Server) support for easy end user installation›› Supports EU Alarm surveillance portal & Danish Saving Trust’s Portal Myhome

It is a user-friendly Indoor IP Camera, supporting both wired and wireless internet access for easy installation. Whether for Home, Business or Public Facility surveillance, or just for fun. This IP Camera has the features the users need all at an affordable price. Despite its compact size, the NorthQ camera supports two-way audio capability, motion detection and excellent video quality with VGA resolution at full 30 frames-per-second, either MPEG4 or M-JPG compression, and video latency as short as 0.2 sec.

NQ-9007 | Personal WIFI Night Camera

›› Pan, Tilt Function & Night Vision (0 lux)›› Built in Ethernet and Wi-Fi 802.11G connection›› 30 Frames per second›› 3G live Streaming›› Resolution up to 640*480›› 2-Way audio streaming (built in microphone)›› Priva›› Privacy button to disconnect lens›› WPS button for easy WIFI set-up between camera and Z-Wave Gateway›› Dual hardware codec support for Mpeg4/Mjpg (motion jpeg)›› CMS (Camera Management Server) support for easy end user installation›› Supports Danish Saving Trust’s Portal Myhome & EU Alarm surveillance portal

It is a user-friendly Indoor IP Night Camera, supporting both wired and wireless internet access for easy installation. Whether for Home, Business or Public Facility surveillance, or just for the fun of it, this IP Camera has the features the users need. Despite its compact size, NorthQ camera supports two-way audio, motion detection and excellent video quality with VGA resolution at full 30 frames-per-second. The camera features Pan/Tilt function to wider view angle, and night vision with 0 lux sensor eye.

2Take the Z- Wave

Z- WAVE TECHNOLOGY

Imagine having total remote control over all the electronics in your home. Not just your entertainment gear, but also your lighting and household appliances,your climate control, security system, health care monitoring...virtually anything that uses electricity. Now imagine that adding all this control to your home isplug-and-play simple, with no new wiring and no need for costly professional installation. Finally, imagine all this being extremely affordable, and modular too,so you can easily and inexpensively create customized control solutions for any room or situation, and add new ones to your home over time

WhWhat you are imagining is Z-Wave, the new standard in wireless remote control. Z-Wave is a next-generation wireless "ecosystem" that allows all your homeelectronics to communicate with each other, and for you to, via remote control. It uses simple, reliable, low-power radio waves that easily travel through walls, floors and cabinets. Z-Wave functionality can be added to almost any electronic device in your house, even devices that you wouldn't ordinarily think of as "intelligent," such as electrical appliances, window shades, thermostats and home lighting.

Z-Z-Wave lets you control these devices in ways that give you complete command, even when you're not at home yourself. You can control your Z-Wavehousehold remotely from an internet connected PC from anywhere in the world... You can even keep control over your household through your cell phone!

Z-Wave unifies all your home electronics into an integrated wireless network, with no complicated programming and no new cables to run. Any Z-Wave enableddevice can be effortlessly added to the network, and many non-Z-Wave devices can be made compatible by simply plugging them into a Z-Wave accessorymodule. In seconds, your device gets added to the network and can communicate wirelessly with other Z-Wave modules and controllers. Because Z-Waveoperates on its own unique frequency, it won't interfere with other wireless equipment in your home, such as cordless telephones, Wi-Fi routers etc.

And because Z-And because Z-Wave is a modular system, you can build your network one device at a time, one room at a time, or the whole house at once. The choice isyours, and the possibilities are nearly endless. Best of all, Z-Wave technology is extremely affordable, giving you powerful home control that you can integrateyourself in moments, at a fraction of the cost of conventional smart home technologies.

Z-Wave delivers on all the promises of the wired home, and opens up exciting new possibilities for the home of the future. And that future is here now, becausehundreds of Z-hundreds of Z-Wave enabled products are already widely available, from some of the best-known brands that you already know and trust. Take a few moment to go through this catalogand and better acquaint yourself with Z-Wave. Get to know how Z-Wave makes your home -- and your life -- safer, more secure,more economical, more convenient and more enjoyable!

Z-Wave | The new standard in wireless remote control

3Take the Z- Wave

Z- WAVE ELECTRICITY CONTROL

NQ-9020 | Smart Metercam

›› Automatic reading of meter values on customers sites›› VGA CMOS sensor with specially designed wideangle lens›› Optical reading camera with OCR (Optical Character Recognition)›› Built in IR-LED for illumination›› Echelon 3150 CPU with flash memory and support for remote program updates›› M-Bus Communication with 2 channels and up 16 cameras per channel›› 2 x RJ45 Connections (M-Bus + 12V)›› 2 x RJ45 Connections (M-Bus + 12V)›› Configurable readout interval (on demand, hourly, daily, monthly)›› Dustproof IP50 housing

Smart MeterCam is a digital camera designed physically and functionally for its purpose – fast and easy installation on existing electromechanical meters, on customer sites, for the automatic reading of meter values. The special lens and integrated infrared lighting provides clear, sharp pictures of the meter’s values, which may also be seen through the Smart MeterCam window.

NQ-700 | Universal & Z-Wave Remote Controller

›› Universal Remote Control›› Control up to 4 AV devices (TV, DVD/VCR, AMP, DMR)›› Access extra functions through the display›› Simple setup with full brand search using the display›› Copy Volume›› Z-Wave Lightning control›› Program and control up to 9 groups with the up to 3 commands per group›› Program and control up to 9 groups with the up to 3 commands per group.›› Simple setup menu to manage your rooms›› Possible to export remote control settings›› Easy resetting of existing Z-Wave devices

The Universal & Z-Wave Remote Control is easy to use; can control any supported AV/TV device as a normal remote control and can control several Z-Waveunits at the same time. “For example you can turn on/off appliances, lights or use the remote control as light dimmer”

NQ-710 | Z-Wave Remote Controller

›› Low-cost Z-Wave remote controller ›› Highly intuitive and easy to use UI ›› Full range of Z-Wave controller functionalities ›› Optimized antenna range ›› Gateway configurable

The NorthQ Minimote is low-cost remote controller focused on end-user ease of use. Although simplicity and user experience are the primary foci, the full range of Z-Wave remote controller capabilities are left intact for the advanced user. Network installation is vastly improved via the interface.

4Take the Z- Wave

Z- WAVE ELECTRICITY CONTROL

NQ-600 | Wireless Z-Wave Power Switch

›› Supports up to 230 Z-Wave devices and 5 groups›› Build-in light dimmer function›› Fast on/off control of Z-Wave units›› Effective range for remote controlled unit 30m+›› MESH Network (Bridge/Repeater function)›› Battery operated with 2 x AA (small batteries)

The Z-Wave Wireless Power Switch is a simple ”Master switch” that can assure that all Z-Wave connected appliances is powered on/off when switch isactivated. This makes it easy to save money by eliminating standby power.

NQ-410 | Z-Wave 2500W On/Off Wall plug

›› Z-Wave 2 Ways On/Off Plug›› Power : 230-240V›› Max capacity : 10A, 2500Watt›› Range to Master 30m+›› MESH Network (Bridge/Repeater function)

The remote controlled 2500W on/off wall plug can be used to remotely manage the power consumption of electrical appliances and thereby reduce unnecessary standby power. The wall plug communicates with the Z-Wave Power Switch allowing it to remotely turn lights or appliances on/off. In addition the on/off functions can be activated using the built-in LED-switch located on the wall plug.

NQ-420 | Z-Wave 400W On/Off Wall plug with dimmer function

›› Z-Wave 2 Ways On/Off Plug›› Power : 230-240V›› Max capacity : 10A, 400Watt›› Range to Master 30m+›› MESH Network (Bridge/Repeater function)

The remote-controlled 400W on/off/dimmer wall plug can be used to remotely dim light or manage the power consumption of electrical appliances and thereby reduce unnecessary standby power. The wall plug communicates with the Z-Wave Power Switch allowing it to remotely dim light or simply turn lights or appliances on/off. In addition the on/off/dimmer functions can be activated using the built-in LED-switch located on the wall plug.

5Take the Z- Wave

Z- WAVE ELECTRICITY & HEATING CONTROL

NQ-300 | Wireless Z-Wave Sensor

›› Dual wireless PIR Sensor operating on 868Mhz›› Battery operated (up to 2 years)›› 2 movement sensors›› Range 10m out/ Down 3,5m›› LUX sensor adjustable›› Measures humidity (+- 3%) and temperature (+-0,5C) with high accuracy›› Configures with walk test with LED›› Configures with walk test with LED›› Configurable lightning control (autonomous)›› Adjustable Sensitivity (Pets)›› Range to Master 30m+›› MESH Network (Bridge/Repeater function)

The Z-Wave Wireless PIR sensor is a simple and easy to install PIR sensor that will communicate with your Z-Wave router and send a SMS warning when it detectsactivity within its range. You will also be able to monitor your alerts on-line via internet browser. Use the advantage of Z-Wave technology to protect your home against perpetrators. It can also measure humidity and light levels and be programmed to adjust light levels that are optimal for the given conditions.

NQ-500 | Z-Wave Danfoss RA Plus-W Thermostat

›› Programmable Wireless Thermostat›› Z-Wave Based›› Integrated in NorthQ Energy Software Solution›› MESH Network (Bridge/Repeater function)›› 3 year battery life (standard AA Alkaline batteries)›› Effective range to receiver /Z-Wave master (up to 30 meters)

Danfoss has developed a new programmable wireless radiator thermostat that provides new opportunities for effective heat control at home. The product is partof the new wireless home automation systems. Via this system, you can control light, heat and a lot of other installations in your home.

6Take the Z- Wave

Z- WAVE SECURITY CONTROL

NQ-350 | Z-Wave Wireless Door Contact

›› Small form factor and aesthetical design ›› Long battery life ›› Optimized antenna range ›› Ease of use and installation ›› Size: 2.0cm x 3.4cm x 7.9cm (main body)

The NorthQ sensor is a battery-powered Z-Wave magnetic door/window sensor with an extremely small form factor. The D/W sensor will send radio signals up to 6 associated Z-Wave devices within its own Z-Wave network when the main unit separates from the smaller unit. Bidirectional mounting plate and push button allows for easy end-user installation. The NorthQ D/W Sensor also has tamper prevention capabilities and low-battery alerts.

NQ-310 | Wireless Z-Wave Sensor

›› Wireless PIR Sensor operating on frequency: 868.42Mhz›› Tamper operated: up to 10m x 100° area›› Environment: indoor use›› Effective range to receiver (up to 30 meters)›› MESH Network (Bridge/Repeater function)›› Battery operated with 3 x AAA (small batteries)›› Range ›› Range : 30 meters line of sight, in unobstructed environment›› Detection rate : Up to 10m x 100° (at 2m mounting height & below 20°C)

The Z-Wave Wireless PIR sensor is a simple and easy to install PIR sensor that will communicate with your Z-Wave router and send a SMS warning when it detectsactivity within its range. You will also be able to monitor your alerts on-line via internet browser. Use advantage of Z-Wave technology to protect your home againstperpetrators.

Take the Z- Wave

NORTHQ PROFILE & VISION

”VP Sales & Marketing”Christian von Scholten

NorthQ | AboutBased in Denmark, NorthQ is a manufacturer of quality electronic hardware products for both personal and business use. Since its launch in 2002 it has enjoyed overwhelming success based on its continuing innovation in the field. Today, NorthQ is well established in Scandinavia and its presence in Europe grows daily.

At NorthQ we are passionate about what we do. We are committed to our vision of providing the most innovative products in the marketplace while remaining competitive. Through this we are able to supply our customers and partners with great value products at the cutting-edge of technological progress.

GreenIT | Why

$avings2 = Energy + EfficiencyAs energy costs continue to rise amid growing financial uncertainty, eliminating waste and improving efficiency are increasingly important goals in both the commercial and private sectors. At NorthQ we aim to provide our customers and partners with profitable and sustainable solutions to their hardware needs by reducing the energy consumption of our products. We believe you can also save money while helping save the environment.

NorthQ | Green PartnersNorthQ is a committed member of the Z-Wave Alliance, which aims to promote Z-Wave technology by providing an open platform for seamless product integration. NorthQ cooperates closely with the Danish Energy Savings Trust, working towards creating energy efficient solutions within the IT sector.

NorthQ | History» In 2002 NorthQ was launched in Copenhagen, Denmark» In 2003 NorthQ expanded sales to Scandinavia and the UK» In 2004 a representative office of NorthQ was opened in Germany and sales expanded throughout Europe» In 2005 NorthQ products were now being distributed in 16 European countries» In 2006 NorthQ products were sold for the first time in the United St» In 2006 NorthQ products were sold for the first time in the United States» In 2007 NorthQ began co-operation with the Danish Energy Savings Trust » in 2008 NorthQ became an official member of the Z-Wave Alliance

For more information visit our website at www.northq.com or contact our offices.

NorthQ ApSStrandvejen 1572900 Hellerup, Denmark.Phone +45 70 27 18 18Fax +45 70 27 19 19sales@northq.com wwwww.northq.com