View
294
Download
9
Tags:
Embed Size (px)
DESCRIPTION
Spring 2011 Catalog Exclusively for Dealers & Rental Centers
Citation preview
Spring/Summer 2011
Airless Paint Sprayers and Accessories
Founded in 1926, Graco is a world leader in fluidhandling systems and components. Since developingtheir first portable airless sprayer in 1958, Graco isrecognized worldwide as the professional contractor’stop choice for spray equipment.
WarrantyRefer to the operating manual for complete details on limited 1 year warranty.
For more information,call 1.888.541.9788 or visit www.magnum.graco.com
©2008 Graco Inc. Form No. 339621 Rev. A 2/08 Printed in the U.S.A.All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
GRACO, INC.P.O. Box 1441Minneapolis, MN 55440-1441
Model Frequency & Amount
If This Describes You
Your Projects Your SprayableCoatings
Magnum dx.015 max. tip size.24 gpm (.91 lpm)
3/8 HP
Periodic use. Ideal forspraying up to 125 gallons (473 L) yearly*
• Homeowner • Handyman • Interiors • Fences • Houses • Decks Light to Medium
Magnum XR5.015 max. tip size
.27 gpm (1.02 lpm)5/8 HP
13% more output than dx!
Occasional, quarterly use.Ideal for spraying up to 175 gallons (662 L) yearly*
• Handyman • Remodeler• Property owner
• Interiors • Fences • Houses• Rental properties • Barns • Decks
Light to Medium
Magnum XR7 .017 max. tip size
.31 gpm (1.17 lpm)3/4 HP
15% more output than XR5!
Moderate, monthly use.Ideal for spraying up to 300 gallons (1136 L) yearly*
• Handyman • Remodeler• Property owner • Maintenance painter• General contractor
• Interiors • Fences • Houses • Rental properties • Barns • Decks • Exterior structures
Light to Medium
Magnum XR9.019 max. tip size
.38 gpm (1.44 lpm)7/8 HP
23% more output than XR7!
Frequent, twice-a-monthuse. Ideal for spraying upto 500 gallons (1893 L) yearly*
• Handyman • Remodeler• Property owner • Maintenance painter• General contractor• Small painting contractor
• Interiors • Fences • Houses• Rental properties • Barns • Decks• Exterior structures• Small commercial buildings
Light to Heavy
Graco 190ES.019 max. tip size
.38 gpm (1.44 lpm)7/8 HP
Consistent, weekly use.Ideal for spraying up to1000 gallons (3785 L) yearly*
• Handyman • Remodeler• Property owner • Maintenance painter• General contractor• Small painting contractor• Professional painting contractor
• Interiors • Fences • Houses• Rental properties • Barns • Decks• Exterior structures• Commercial buildings
Light to Heavy
Why Airless Spray?It’s faster. . .• Users can save valuable time versus other methods.• Up to 10 times* faster than brush applications.• Up to 4 times faster than roller applications.
It offers uniform coverage. . .• Easier to apply paint to a variety of surfaces – smooth to rough.• Even distribution of material on uneven surfaces.
It’s versatile. . .• Add accessories to expand your productivity and save time.• Spray most common coatings or use a pressure roller
attachment for interiors or where backrolling is necessary.
It’s more affordable than renting. . .• Designed with your needs in mind, these sprayers are an
affordable way to use an airless sprayer. • The sprayer pays for itself in just a few projects!
* Production times provided are based on application time only.
COATINGS
TIP
HOLE
SIZ
E
LIGHT
Stains
.011
.013
.015
.017
.019
Enamels PrimersInteriorPaints
ExteriorPaints
MEDIUM HEAVY
How Do I Choose the Right Sprayer?Ask yourself these 5 simple questions:1. How often will I spray?
Periodically Quarterly Monthly Twice-a-Month Weekly
2. How many gallons (liters) a year will I spray?125 gal. (473 L) 175 gal. (662 L) 300 gal. (1136 L)500 gal. (1893 L) 1000 gal. (3785 L)
3. What sprayable coatings will I use?Light Medium Heavy
4. What tip sizes can I use?
5. What types of surfaces and projects will I be spraying?Interiors Exteriors Houses
Rental Properties Commercial Buildings
* Usage guidelines (yearly gallons) are intended to help with product selection. With routine maintenance and care, your sprayer will last many years.
Order Online www.gnedi.comGNE Sold in MN, ND, SD, IA and WI
Prices• The prices printed in this catalog are the manufacturers’ suggested retail prices. Your price will vary, depending upon purchase volume and freight. • Contact GNE to determine your discount from retail price. Possession of a GNE catalog does not constitute a right to buy.• Prices and specifications are subject to change without notice.• GNE reserves the right to correct pricing errors on any/all print/ electronic media.
2
• Qualifying initial stocking order must be placed according to dealer program. • Call1-800-822-0295 to ask your GNE territory sales representative for more information.
POWER LINK
Online Dealer PortalSign Up Now at powerlink.gnedi.com
Your Source For:• Online Ordering of Parts, Engines, and Power Equipment• Dealer Pricing• Parts Lookup• Sales Programs and Product Bulletins• Online Warranty Submission• Owners Manuals• Exclusive Dealer Specials and Promotions• And Much More!
Visit the Power Link to request your Username and Password
• Save money on freight. Ask us about our Pallet Program.• GNE will help assist in creating a pallet load so you receive the most economical freight shipments.• We can help customize your order to fit the most units on a pallet to conserve freight.• Ask about new Flat Fee shipping rates.• Receive same-day shipping of all In-stock parts when you place your order with GNE by 2:00 p.m.
Customer Will-Call Orders• Customers are invited to pick up their orders from GNE, with a minimum of 4 hours prior notice provided. • Will-Call hours are from 8:00 a.m. to 4:30 p.m. If possible, please notify sales of pick-up date at time of order.
Shipping and Freight• Unless a preference is indicated on your purchase order, GNE will ship orders via the the most economical carrier. • In the event we are unable to fill your entire order, partial shipment will be made unless “Ship Complete” is indicated on your purchase order. • There is a handling charge for equipment or engines delivered by GNE personnel. • Individual engines shipped via UPS or Spee-Dee Delivery must undergo additionaL packaging prior to shipment. Therefore, there is additional handling charge per unit for such orders. • Motor freight shipments are F.O.B. Rogers, MN. Freight carriers will be chosen by GNE, and motor freight costs will be pre-paid and added to your invoice, unless other arrangements are specified on your purchase order. • Additional charges may apply for manufacturer-direct shipments.• If your package should arrive damaged, save all packaging and cartons for the carrier to inspect. Damages or shortages must be reported at once to the carrier. Notify GNE of any shortages within 24 hours of receipt.
Payment Terms• Standard payment terms are 1% 10, Net 30 Days for customers with approved credit, unless purchased under a sales program.• Orders from customers without approved credit will be processed as COD, or may be pre-paid with a credit card. • GNE accepts Visa, Mastercard, American Express and Discover cards. Credit card and COD payments do not qualify for the 1% payment discount. • A 1.5% monthly interest charge will be assessed to outstanding invoices. • A $30.00 handling fee will be applied to NSF checks.
Returns• Parts must be returned within 30 days of the invoice date.• Please contact GNE for prior authorization, as returned merchandise must have a GNE-issued RMA number clearly marked on the exterior of the shipping carton, or it will not be accepted. • Returned parts are subject to a 20% restocking fee. Please contact a Power Team representative for parts return limitations. • Engines and power equipment are non-returnable• Special orders are non-cancelable and non-returnable.• Scratch and dent engines are sold “As Is” and are non-returnable.
Ordering• For fastest order processing, order online, via fax, or by e-mail.• Include current part numbers or model numbers, a purchase order number and shipping preference.• There is a $15.00 minimum order requirement (net price before shipping and handling and/or sales tax, if applicable).• There is a $5.00 handling charge for orders not meeting the $15.00 minimum purchase requirement.
Freight ProgramsEach Power Team member is expertly equipped to
answer your questions and help you place your order for parts, engines and power equipment, offering you
the best of service and convenience.
Call GNE Power Team Toll Free: 1-800-822-0295
Local Area: 763-428-2237
Do It All with Just One Call
GNE Terms and Policies
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
GNE Welcomes Dealer Inquires
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold in MN, ND, SD and IA
WELCOME TO GNESold in MN, ND, SD, WI and IA
3
WELC
OM
E TO G
NE
3
Manufacturer Index Apache Hose . . . . . . . . . . . . . . . . . . . . . . . . . 33 BOB-CAT . . . . . . . . . . . . . . . . . . . . . . . . . .50-53 Brown . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67-69 Classen . . . . . . . . . . . . . . . . . . . . . . . . . . . .46-49 Dosko . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76-77 Drainzit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Graco . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 GNE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4-5 Honda Engines . . . . . . . . . . . . . . . . . . . . . .78-89 Honda Power Equipment . . . . . . . . . . . . . . .25-40 Honda Service Chemicals . . . . . . . . . . . . . . . . . 41 Little Wonder . . . . . . . . . . . . . . . . . . . . . . . .42-45 Mantis . . . . . . . . . . . . . . . . . . . . . . . . . . . .58-59 Paladin Brands . . . . . . . . . . . . . . . . . . . . . .12-24 Rolair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Ryan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54-57 SenDec . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Stone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70-74 Timberwolf . . . . . . . . . . . . . . . . . . . . . . . . .60-62 Toro . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6-11 Turf Teq . . . . . . . . . . . . . . . . . . . . . . . . . . .63-66
Product Group Index Aerators . . . . . . . . . . . . . . . . . . . . . 47-48, 55-56 Air Compressors . . . . . . . . . . . . . . . . . . . . . 4, 75 Augers . . . . . . . . . . . . . . . . . . . . . . . .5, 8, 13-15 Blowers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Bed Openers / Shapers . . . . . . . 44, 63-65, 67-69 Brooms . . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 66 Brush Chippers . . . . . . . . . . . . . . . . . . . . . 11, 77 Brush Cutters . . . . . . . . . . . . . . 12, 16, 63-64, 67 Compaction Equipment . . . . . . . . . . . . . . . . . . . 73 Composter . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Dethatchers . . . . . . . . . . . . . . . . . . . . . 47, 54, 66 Edgers . . . . . . . . . . . . . . . . . . . . . . . . . . . 45, 67 Engines . . . . . . . . . . . . . . . . . . . . . . . . .78-86, 89 Generators . . . . . . . . . . . . . . . . . . . . . . . . .34-40 Hedge Trimmers . . . . . . . . . . . . . . . . . . . . 45, 59 Hoses (Suction & Discharge) . . . . . . . . . . . . .32-33 Hour Meters . . . . . . . . . . . . . . . . . . . . . . . . . . 88 Lawn Mowers . . . . . . . . . . . . . . . . . 28-29, 50-53 Log Splitters . . . . . . . . . . . . . . . . . . . .5, 11, 59-62 Mini Skid Loaders . . . . . . . . . . . . . . . . . . . . . .6-8 Mixers . . . . . . . . . . . . . . . . . . . . . . . . . . . .71-72 Mulchers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Oil & Oil Changing Equipment . . . . . . . .41, 87-88 Paint Sprayers . . . . . . . . . . . . . . . . . . . . . . . . . 90 Power Rakes . . . . . . . . . . . . . . . . . . . . 20, 63, 66 Pressure Washers . . . . . . . . . . . . . . . . . . . . . . . . 4 Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . .4, 30-31 Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Screeds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Skid Loader Attachments . . . . . . . . . . . . . .8, 12-24 Snowblowers & Snow Removal Equip . . 21, 25, 66 Sod Cutters . . . . . . . . . . . . . . . . . . . . . . . . 46, 57 Stump Grinders . . . . . . . . . . . . . . . . . . 11, 21, 76 Sulkies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Sweepers . . . . . . . . . . . . . . . . . . . . . . 22, 63, 66 Tillers . . . . . . . . . . . . . . . . . . . . 23-24, 26-27, 58 Trailers . . . . . . . . . . . . . . . . . . . . . 10, 49, 55, 57 Trenchers . . . . . . . . . . . . . 9-10, 23-24, 63-64, 68 Trimmers . . . . . . . . . . . . . . . . . . . . . . . . 5, 27, 59 Trowels (Power) . . . . . . . . . . . . . . . . . . . . . . . . 74 Truck Loaders . . . . . . . . . . . . . . . . . . . . . . .43-44 Turf Rakes . . . . . . . . . . . . . . . . . . . . . . . . . 47, 54 Turf Seeders . . . . . . . . . . . . . . . . . . . . 19, 49, 54 Vacuums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Walk-Behind Trimmers . . . . . . . . . . . . . . . . . . . . 5 Wire Installation Systems . . . . . . . . . . . . . . . . . 67
Valid 06/01/11 - 06/30/11Please mention code: SPE11061 when ordering
JUNE
Valid 03/01/11 - 03/31/11Please mention code: SPE11031 when ordering
FREE SUNGLASSESWith a $250 parts order.
Offer valid for one-time use.
MARCH
Valid 04/01/11 - 04/30/11Please mention code: SPE11041when ordering
APRIL
???????
Valid 08/01/11 - 08/31/11Please mention code: SPE11081 when ordering
10% OFF LASER PARTSReceive 10% of a Laser Parts order.
Offer valid for one-time use.
AUGUST
Valid 05/01/11 - 05/31/11Please mention code: SPE11051 when ordering
FREE FREIGHT ON A PARTS ORDER OF $250+
Offer valid for one-time use.
MAY
Valid 07/01/11 - 07/31/11Please mention code: SPE11071 when ordering
JULY
FREE LEATHERMANWith $5,000 equipment purchase.
Offer valid for one-time use.
NDHonda Engines
Honda Power EquipmentApacheBanjo
BOB-CATBradcoBrownClassenDosko
EarthwayFFCGNE
Gorman RuppGracoHandyHarley
Hatz EnginesLaser
Little WonderMantis
McMillenMilwaukee
OxlitePrecisionRol-AirRyan
SenDecStone
Sweepster Timberwolf
ToroTurf Teq
SDHonda Engines
Honda Power EquipmentApacheBanjo
BOB-CATBradcoBrownDosko
EarthwayFFCGNE
Gorman RuppGracoHandyHarley
Hatz EnginesLaser
McMillenMilwaukee
OxlitePrecisionRol-AirRyan
SenDecStone
SweepsterTimberwolf
ToroTurf Teq
WIApacheBanjo
BOB-CATBradcoBrownClassenDosko
EarthwayFFCGNE
Gorman RuppGracoHandyHarleyLaser
Little WonderMantis
McMillenMilwaukee
OxlitePrecisionRol-AirRyan
SenDecStone
SweepsterTimberwolf
ToroTurf Teq
MNHonda Engines
Honda Power EquipmentApacheBanjo
BOB-CATBradcoBrownClassenDosko
EarthwayFFCGNE
Gorman RuppGracoHandyHarley
Hatz EnginesLaser
Little WonderMantis
McMillenMilwaukee
OxlitePrecisionRol-AirRyan
SenDecStone
SweepsterTimberwolf
ToroTurf Teq
GNE Brands and Distribution Territory
IAApacheBanjoBradcoDosko
EarthwayFFCGNE
Gorman RuppGracoHandyHarleyLaser
McMillenMilwaukee
OxlitePrecisionRol-Air
SenDecStone
SweepsterTimberwolfTurf Teq
MTApacheBanjo
BOB-CATClassenDosko
EarthwayGNE
Gorman RuppGracoHandyLaser
Little WonderMantis
MilwaukeeOxlite
PrecisionRyan
SenDecMI
ApacheBanjo
BOB-CATDosko
EarthwayGNE
Gorman RuppGracoHandyLaser
MilwaukeeOxlite
PrecisionRyan
SenDec
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
Territory restrictions apply. Products may not be available in entire state. Please contact TM for details.
Any Size Pallet - Shipped for $50$50 pallet shipping on one pallet shipped
anywhere within MN, ND, SD, IA, WIOffer valid for one-time use.
FREE HONDA HATWith a $250 parts order.
Offer valid for one-time use.
4
GN
E EX
CLU
SIV
ESGNE EXCLUSIVESSold in All States
Pressure WasherHigh-performance pressure washer combined with the power of a Honda engine with the long-life direct drive pumps for unsurpassed performance on tough cleaning tasks.
Consumer Model Features:•DirectDrive&AdjustablePressure•160cc Honda OHC Engine•CometPump,2,800PSI•NetTorque:6.9|GPM:2.5•Nozzles:Quick-Connect25� and Soap•ThermalProtectorIncluded•140ºFMaxInletWaterTemp•34”Lx21”Wx38”HPushDownCart•10”PneumaticTires•25’GrayHigh-PressureHosew/3/8”QuickCouplers
Item Number Description RETAIL
PRICEA 2S5X-KRGNE.AME 2”TrashPump,GS190HondaEngine,200GPM,IPTPump,StrainerIncluded $880
A 3S5X-KRGNE.AM 3”TrashPump,GS190HondaEngine,300GPM,IPTPump,StrainerIncluded $1,000
B 109270GNE.KBAR 2”Semi-TrashPump,GS190HondaEngine,131GPM,StrainerIncluded $500
B 109280GNE.KBAR 3”Semi-TrashPump,GS190HondaEngine,236GPM,StrainerIncluded $600
C 205PH-5-GC.BAN 2”TransferPump,GC160HondaEng.,BallBearingCrankshaft,BanjoPolyPump,EPDMSeals,5VaneImpeller $439
D 205PH-FGC.BAN 2”TransferPump,GC160HondaEngine,FixedThrottle,BanjoPolyPump,EPDMSeals,5VaneImpeller $399
E 205PH-5-160.BAN 2”TransferPump,GX160HondaEngine,BanjoPolyPump,EPDMSeals,5VaneImpeller $539
E 300PH-6-200.BAN 3”TransferPump,GX200HondaEngine,BanjoPolyPump,EPDMSeals,5VaneImpeller $649
F 205PO.BAN 2”BanjoPolyPumpOnly,Self-Priming,CentrifugalPump,3/4”Shaft,5VaneImpeller,ForGasEnginesOnly $199
F 300PO.BAN 3”BanjoPolyPumpOnly,Self-Priming,CentrifugalPump,3/4”Shaft,4VaneImpeller,ForGasEnginesOnly $329
BA C
D E
Engine and pedestal not included.
F
1577543GN.KBARRETaIL PRICE
$400
Industrial Air CompressorOil Free - Direct Drive•160ccHondaOHCEngine•MaximumPressure:155PSI•Pontoonstyletankdesignwithtwo-2gallontanks• 6.9CFM@40PSI|5.0CFM@90PSI• Equippedwithregulator,gauges,quickconnectand cushioned handle grips • Item number CTA5090412.SANRETaIL PRICE
$599
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Center | Call For Dealer and Rental Discount
5
GN
E EXCLU
SIV
ESGNE EXCLUSIVES
Sold in All States
One Man AugerFast, Uniform Coverage•HondaGX35Engine•Centrifugal,allmetal,automaticclutch•42.5to1ratio• Straightcut,heattreated,spurgeardesigntransmission• Sealedbearings• Accepts1”roundand1”squarehubaugers• Item number M208H.GENRETaIL PRICE
$799
Item Number Description RETAIL
PRICEM208H-2E.GNE 2”x36”Bit $120M208H-3E.GNE 3”x”36Bit $124M208H-4E.GNE 4”x”36Bit $127M208H-6E.GNE 6”x”36Bit $133M208H-8E.GNE 8”x”36Bit $140M208H-15X.GNE 15”Extension $92
Item Number Engine RETAIL
PRICE
TRI2100.EDN 160cc Honda GCV Engine $599TRI2101.EDN 160cc Honda GCV Engine $699
1108GNE.KBAR11571GNE.KBAR
NEWSplits Both
Directions
Augers sold separately
Auger Bits & Extension
NEW
Dual Split Log Splitter20 Ton Splitter•HondaGC160ccEngine•20Ton•11GPM•HorizontalDualSplit• 25”Max.LogLength• 4”x24”Cylinder• 360lbs.• Item number 11571GNE.KBAR
Horizontal/Vertical Log Splitter22 Ton Splitter•HondaGC160ccEngine•22Ton•11GPM•13Sec.CycleTime•Horizontal/VerticalOperation• 25”Max.LogLength• 4”x24”Cylinder• 500lbs.• Item number 1108GNE.KBAR
RETaIL PRICE
$1,199 RETaIL PRICE
$1,499
TRI2101.EDN
Walk-Behind Weed TrimmersMakes Trimming a Breeze•PoweredbyaHondaGCV160ccengine• Fullyenclosedhousing• 14Gaugehousing• Offsetheadtotheleftfortrimmingclosetobuildingsandfences• ModelTRI2101Featuresadropwheelforcurbsidetrimming• TRI2100:14”HighWheel/TRI2101:16”HighWheel
GNE
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Center | Call For Dealer and Rental Discount
TORO DINGOSold in MN, ND, SD and IA
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
TORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Rental Centers | Call For Rental Discount6
TORO
DIN
GO
Pallet fork attachment sold separately.
Dingo 323 Wheeled Utility LoaderFeaturing 4-Paw® Traction Control System•Ride-onplatformprovidesimprovedvisibilityofyourworkingareaandattachments.• 4-Paw® independent 4-wheel drive system includes four independent wheel motors, delivering hydraulic pressure to all four wheels at all times .• Zero-turncapabilityallowsaccesstoconfinedspacesyouneverdreamedpossible.• Powerful2-pumphydraulicsystemforefficientseparationofpowerattachments,wheelsorloaderarms.• Quick-changedriplessflat-facecouplerskeephydraulicsystemclean.• Removablecounterweightallowsyoutoaddliftcapacityorincreasedownpressure for optimal attachment performance .• 23HPKohlerair-cooledgasolineenginewithtwo-stage,heavy-dutyremoteaircleaner.• Two,4-gallonfueltanks.• 4.5mphmax.groundspeedforwardandreverse.• Mechanicallydrivenbyhydraulicpumps.• 10.8gpm@300psihydraulicpower.• Overallwidth-40.5”• 1567lbs.• Item number 22318.TOR
RETaIL PRICE
$15,869
Bucket attachment sold separately.RETaIL PRICE
$13,309
Dingo 220 Wheeled Utility LoaderPacked with the Power You Need•Ride-onplatformprovidesimprovedvisibilityofyourworkingareaandattachments.• Zero-turncapabilityallowsaccesstoconfinedspacesyouneverdreamedpossible.• Powerful2-pumphydraulicsystemforefficientseparationofpowerattachments, wheels or loader arms .• Quick-changedriplessflat-facecouplerskeephydraulicsystemclean.• Removablecounterweightallowsyoutoaddliftcapacityorincreasedownpressure for optimal attachment performance .• 20HPKohlerair-cooledgasolineenginewithstandardtwo-stageaircleaner.• One,4-gallonfueltank.• 4.5mphmax.groundspeedforwardandreverse.• Mechanicallydrivenbyhydraulicpumps.• 10.8gpm@300psihydraulicpower.• Overallwidth-40.5”• 1430lbs.• Item number 22317.TOR
Auger attachment sold separately.
TX 427 Narrow Track Utility LoaderInnovative, Rugged and Dependable•ExclusiveTXcontrolsystemiseasytolearn;newoperatorsareinstantly productive and in command .• DurableKevlar®reinforcedtracksofferextendedlife.• Tracksdisperseweightevenly,givinghighflotationandalightfootprinton turf, yet delivering the necessary traction in loose sand or mud .• 27HPKohlergasolineenginewithtwo-stage,heavy-dutyremoteaircleaner.• Trackwidth-5.9”• Overallwidth-33.7”• 5.1psigroundpressure.• 16.9gpmhydraulicflowtoeachtrack,6gpmhydraulicflowtoloaderarm.• 11.4gpmauxiliaryhydraulicflow.• 1882lbs.• Item number 22321.TOR
RETaIL PRICE
$20,689
Available Exclusively to Rental Centers
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
TORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Rental Centers | Call For Rental Discount 7
TORO
DIN
GO
TX 427 Wide Track Utility LoaderShows Up for Work Every Day, Ready for Virtually Any Job•ExclusiveTXcontrolsystemiseasytolearn;newoperatorsareinstantly productive and in command .• DurableKevlar®reinforcedtracksofferextendedlife.• Tracksdisperseweightevenly,givinghighflotationandalightfootprinton turf, yet delivering the necessary traction in loose sand or mud .• 27HPKohlergasolineenginewithtwo-stage,heavy-dutyremoteaircleaner.• 16.9gpmhydraulicflowtoeachtrack,6gpmhydraulicflowtoloaderarm.• 11.4gpmauxiliaryhydraulicflow.• Trackwidth-9.5”• Overallwidth-41”• 3.6psigroundpressure.• 2075lbs.• Item number 22322.TOR
Wide Track
RETaIL PRICE
$21,744
TX 525 Narrow Track Utility LoaderVersatility to Handle Countless Jobs on Every Site•ExclusiveTXcontrolsystemiseasytolearn;newoperatorsareinstantly productive and in command .• DurableKevlar®reinforcedtracksofferextendedlife.• Tracksdisperseweightevenly,givinghighflotationandalightfootprintonturf, yet delivering the necessary traction in loose sand or mud .• 25HPKubotadieselenginewithtwo-stage,heavy-dutyremoteaircleaner.• Trackwidth-5.9”• Overallwidth-33.7”• 5.2psigroundpressure.• 16.9gmphydraulicflowtoeachtrack,6gpmhydraulicflowtoloaderarm.• 13.8gpmauxiliaryhydraulicflow.• 1904lbs.• Item number 22323.TOR
RETaIL PRICE
$23,593
TX 525 Wide Track Utility LoaderTackle a Lot More Work in Less Time•Samefeaturesastheabove525NarrowTrackwiththesedifferences:• Trackwidth-9.5”• Overallwidth-41”• 3.4psigroundpressure.• 2001lbs.• Item number 22324.TOR
RETaIL PRICE
$24,648
Bucket attachment sold separately.
Narrow Track
Tiller attachment sold separately.
Wide Track
Trencher attachment sold separately.
Available Exclusively to Rental Centers
TORO DINGOSold in MN, ND, SD and IA
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
TORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Rental Centers | Call For Dealer Discount8
TORO
DIN
GO
Available Exclusively to Rental Centers
Compact Utility Loader Attachments
Item Number Description RETAIL PRICE
22409.TOR ** StandardBucket-4.3cu.Ft. $55722410.TOR LightMaterialsBucket-6.4cu.Ft. $64122520.TOR NarrowBucket-3.2cu.Ft.(34.5"width) $496
Buckets
Item Number Description RETAIL PRICE
23164.TOR AdjustableForks(Manuallyadjustablepalletforks) $78622423.TOR Multi-purpose tool (3 tine ripper, tow bar and tree boom) $64723135.TOR** Concrete Breaker (180lb class - conical bit) $7,11322442.TOR Cement Bowl (Use with Auger Power Head to mix concrete) $83022438.TOR TreeFork(Hydraulicallyadjustablenurseryforks) $1,44122475.TOR TXConvertiblestand-onPlatform(forgastrackmodels) $59922476.TOR TXPlatformConvertiblestand-on(fordieseltrackmodels) $70322521.TOR Grapple Rake (fork type) $2,93922456.TOR SnowThrower,2-Stage,44”Clearingpath $4,134
Material Handling Attachments
Item Number Description RETAIL PRICE
22805.TOR HighTorqueAugerPowerHead(Upto30"augerbits) $2,65322806.TOR Universal Swivel Auger Power Head (Great for fencing) $2,78622820.TOR 6"FullFlightAugerBit(requires22805or22806torun) $30322821.TOR 9"FullFlightAugerBit(requires22805or22806torun) $38922822.TOR 12"FullFlightAugerBit(requires22805or22806torun) $46522823.TOR 15"FullFlightAugerBit(requires22805or22806torun) $56722814.TOR 18"AugerBit(requires22805or22806torun) $66722815.TOR 24"AugerBit(requires22805or22806torun) $69922816.TOR 30"Auger(requires22805torun) $95422818.TOR 12"AugerExtension $14822819.TOR 24"AugerExtension $207
Augers
Item Number Description RETAIL PRICE
22473.TOR High Torque Trencher Head (Boom & Chain Sold Separately) $3,67722474.TOR High Speed Trencher Head (Boom & Chain Sold Separately) $3,67722472.TOR TrenchFiller(dualaugerhydraulictrenchfiller) $2,73722477.TOR Trencher Crumber $39222420.TOR Bore Drive Head (horizontal boring unit) $2,35522421.TOR RodandReamerKit(5'rodsupto20ft) $1,09122911.TOR ** Vibratory Plow (High efficiency low impact installation) $5,988
See List of CUL Trencher Chains on Pg 10 Under TRX Trencher Chains (Dingo & TRX)
Trencher and Underground Digging Attachments
** Attachment requires added components available through sales department .
Trench Filler
Auger Bits
Forks
Buckets
Note: Item numbers with ** are attachments that require added components.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Rental Centers | Call For Rental Discount8
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
TORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Rental Centers | Call For Dealer Discount 9
TRX Walk-Behind Trenchers“Right on Track”• TRXcontrolsystemiseasytouse,withthreeeasycontrolsoperating all traction and trenching functions .• ControlsworkvirtuallyidenticaltotheToroDingomodels,soyou can train new operators quickly .• Controlsystemallowsyoutotrenchwithonehandwhileadjusting boom depth with the other .• Trackdrivesystemprovidesalowcenterofgravityandlargefoot print offering stability and increased maneuverability without causing damage to existing turf . Tracks provide flotation while delivering the necessary traction in loose sand or mud .• Three-pumphydraulicsystemdeliverspowertothetracksandthechain.• Trackwidth-5.9”• Transportspeedupto3mph.• 36”max.trenchdepth.• Pivotingtrencherheadprovideshighgroundclearancetomake moving in difficult terrain easier than with other trenchers .• PowerfulKawasakienginesdelivertheperformanceyouexpect from Toro, and ensures your trencher will be reliable and easy to start .• Dual-elementaircleanerreducesenginewearandimproves machine performance . Optional remote filter available for model 22971 .• Overallwidth-33.8”•Weight:TRX15-1,100lbs.TRX19-1,185lbs.TRX26-1,248lbs.
Boom and chain sold separately. Shown here with optional crumber.
Available Exclusively to Rental Centers
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Rental Centers | Call For Rental Discount 9
Item Number Description RETAIL
PRICE22970 15HPKawasaki;TRX15(tractionunitonly) $10,61722971 19HPKawasaki;TRX19(tractionunitonly) $13,05422974 26HPKawasaki;TRX26(tractionunitonly) $14,942
TORO
DIN
GO
Item Number Description RETAIL PRICE
22414.TOR Utility Blade $2,04822425.TOR Power Box Rake $7,09422445.TOR Tiller $3,93923102.TOR Soil Cultivator $6,10923163.TOR Backhoewith13”Bucket $8.98023165.TOR Leveler $63523161.TOR DingoWheeledUnitFit-UpKit $39023162.TOR DingoTXUnitFit-UpKit $253
Earth Moving / Digging Equipment
Tiller
Compact Utility Loader Attachments ContinuedNote: Item numbers with ** are attachments that require added components.
Optional TRX Trailer, Chains and Attachments Available - See page 10 for details.
TORO DINGOSold in MN, ND, SD and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Center | Call For Rental Discount10
TORO
DIN
GO
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
TORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
Available Exclusively to Rental Centers
Item Number Description RETAIL
PRICE22975 24"Boom $50022976 36"Boom $64122977 48”Boom $79022978 TRXBoreDriveHead $2,14122980 TRXBackfillBlade $38222477 Trencher Crumber $392
Sitework TRX Trencher Booms & Attachments
Item Number Description RETAIL
PRICE22480 24"x4"SoilChain $37422481 24"x4"ComboChain $64422482 24"x4"RockChain $37522483 24"x6"SoilChain $50022484 24"x6"ComboChain $77522485 24"x6"RockChain $50022486 36"x4"SoilChain $50022487 36"x4"ComboChain $88622488 36"x4"RockChain $50022490 36"x6"SoilChain $72822491 36"x6"ComboChain $99722489 36"x6"RockChain $73022492 48”x4”SoilChain $45822493 48”x4”ComboChain $71322494 48”x6”SoilChain $55022495 48”x6”ComboChain $80522496 24”x4”BulletChain $1,12122497 24”x6”BulletChain $1,22322498 36”x4”BulletChain $1,52922499 36”x6”BulletChain $1,631
Sitework TRX Trencher Chains (Dingo & TRX)
Item Number Description RETAIL
PRICE22979 TRX/STXtrailer(tiedowns,ramp,torsionaxle) $1,850
TRX Dedicated Trailer
22979 Trailer (Trencher Sold Separately). 22979 Trailer (Trencher Sold Separately).
Bore Drive Head
Backfill Balde
Trencher Crumber
Boom
Combo Chain
Soil Chain
Rock chain
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Center | Call For Rental Discount
Order Online www.gnedi.com Order Online www.gnedi.comTORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
TORO DINGOSold Exclusively to Rental Centers in MN, ND, SD, WI and IA
11
TORO
DIN
GO
Available Exclusively to Rental Centers
LS-9 Log Splitter28 Ton Horizontal/Vertical Operation• Splittingforceof28tons.• 9HPSubaruEngine• 9”Solidsteelwedge.• Rubbertorsionsuspensionaxleforsmoothtrailering.• Horizontalorverticaloperation.• Adjustableswing-awayjackw/pneumatictiresforeasymaneuvering. • Trailerlightsstandard.• 24”Stroke• 2”Hitch• 715lbs.• Item number 22606.TOR
RETaIL PRICE
$3,617
BC-25 Brush Chipper6” Chipping Capacity• 25HPKohlerEngine• 6”diametercapacity• 23”x20”Feedopening.• Heavy-dutycentrifugalclutch.• Rubbertorsionsuspensionaxleforsmoothtrailering.• Towableunitfitsthroughstandard36”gates.• Trailerlightsstandard.• Gravity-feedsystem• 2”Hitch• 1,053lbs.• Item number 22604.TOR
RETaIL PRICE
$8,413
NEW NEW
Item Number Description RETAIL
PRICE22601.TOR SGR-6, 200cc Honda Engine $2,31622602.TOR SGR-13, 390cc Honda Engine $3,946
22602.TOR22601.TOR
Handle Bar Stump GrindersPowered by Honda OHV Engines• Quadrubladedesignallowseasyreplacementofteethwithinminutes.• Rubbergasketsbetweencomponentsresultsinlessoperatorvibration.• Well-balancedmachineequatestoless“muscling”whilecutting.• Heavy-dutycentrifugalclutch.• Liftinghandlesforeasyloading.• 12Toothcutterwheel,9.5”diameter. • Weight: SGR-6:103lbs. SGR-13:240lbs.
NEW
Traction Controls:1: Left/Right Track Control (forward/reverse/turn)
2: Sweep, lift/lower, and engagement of grinder head
RETaIL PRICE
$14,999
NEW
STX 26 Stump GrinderDedicated Stump Grinder• TheSTX26trackedstumpgrindercombinestheuserfriendlyattributesof theDingoTXcompactutilityloaderonacompactstumpgrinderplatform.• Tractioncontrolsystemofferssmoothoperationandfewerleversthan conventional stump grinders . Two simple controls operate all traction and grinding function .• Trackdriveprovideslowcenterofgravityandlarge footprint . Increased stability on side hills . Operates in wet & soft ground conditions . • 26HPKawasakiengine.• Headswing-47.5”arc• 13.5gpmhydraulicflowtohead.• Cutterwheel:19”Dia.• Cutterdepth: 12.5”belowgrade• Cutterheight: 33”abovegrade• 1,150lbs.• Item number 23210.TOR
12
BEST SELLERS
Call or Log On Today to Request Your FREE Paladin Product Manual
615 Trencher 17880 Brush Cutter
3600 Snow Push with Pull Back 1400 Snow Blade Brush Grapple
M4M Box Rake M6H Box Rake PS-6 Power Seeder
QCSS Angle BroomWSP36M
Walk Behind Sweeper
SB SeriesCollector Sweeper
Item Number PALLIT108.PAL
Land Sculptor
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
PaLa
DIN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
PaLa
DIN
13
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
485
Silage Defacer
Item Number Description RETAIL
PRICE
aUGERS
23537.MCMAuger Only:X1475SSLwithoutAuger;Acceptsupto36”Dia.Augers;OutputShaft2”Hex;FeaturesReverseRotationforEasyBackout;HydraulicReliefValveProtectsUnitfromDamagewhentheAugerHitsLargeImmoveableObjects;HeavyDutyAllGearDesignforLongLife&MinimalMaintenance
$1,713
24685Auger Drive Assembly*:X1475SSLwithoutAuger;Acceptsupto36”Dia.Augers;OutputShaft2.56”Round;FeaturesReverseRotationforEasyBackout;HydraulicReliefValveProtectsUnitfromDamagewhentheAugerHitsLargeImmoveableObjects;HeavyDutyAllGearDesignforLongLife&MinimalMaintenance
$2,329
21235 Universal Front End Loader Mount $257
† 24435 HDF Style Auger Bit:36”x3’,(11)Bolt-OnTeeth,2.56”Round $742
BaCKHOES† 105299-12-3PT Series 485:Incl.Fold-DownPin-onStabilizers,SwingSpeedControl&GrouserPads;12”Std.Bucket(3Teeth);3PtMountKit $9,145
111637-12.BRA Skid Hoe Assembly:(fixed),12”Std.Bucket(3Teeth) $2,678
112140-12-EC.BRA Swing Hoe Assembly:12”Std.Bucket(3Teeth),withElectricControlBox $4,767
BaLE11920-0022 Bale Mover: Model 3600 $801
LAF1960-0022.FFC Bale Squeeze $2,645
16015 Bale Spike: Quick-Attachcapability:adaptstofitagriculturaltractors,telescopichandlers,wheelloadersorbackhoe $538
BRUSHCUTTERS17880 60”;StandardFlow;15-20GPM;IncludesDoubleEdgeBlades $5,023
† 17880-WHL 60”;StandardFlow;15-20GPM;IncludesDoubleEdgeBlades;IncludesFoamFilledFrontCasterWheelforExtremeConditions $5,787
15330 72”;StandardFlow;18-22GPM;IncludesDoubleEdgeBlades $5,597
† 15330-CW 72”;StandardFlow;18-22GPM;IncludesFoamFilledFrontCasterWheelforExtremeConditions $6,361
24518 WheelKitAssemblyforBrushCutter $764
FORKSLAF1872-0022 Manure Fork:72”UniversalMount $1,643
POST DRIVER111487-8-108.BRA Post Driver:Manualsideshift,StrikerPlateandCollarAssemblies,42StrokesPerMinute,48”MaximumStroke $7,152
SILaGE DEFaCER† 16980 Silage Defacer: 96”fullwidthcutallowsdefacertocutnexttowallsandstraightthroughtobackofbunker,18-22GPM $5,432
113427.BRA Tree Shear: ForSkidLoaders,Cutsupto10”Diameter,OneInchThickHighStrengthShearingBlades $5,519
TILLERLAF3468-0022 Tiller:68”WorkingWidth,UniversalSSLMounting $5,400
Backhoe Bale Squeeze Bale Mover
Post Driver
Silage Defacer Tree Shear
aGRICULTURE
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
14
Item Number
Size (Dia x L)
# of Teeth/Type Adapter RETAIL
PRICE
20099 9”x4’ 3;Bolt-On 2”Round $325
20186 12”x4’ 4;Bolt-On 2”Round $376
20025 6”x4’ 2;Bolt-On 2.56”Round $223
20059 8”x4’ 2;Bolt-On 2.56”Round $319
20095 9”x3’ 3;Bolt-On 2.56”Round $299
20100 9”x4’ 3;Bolt-On 2.56”Round $325
20149 10”x4’ 3;Bolt-On 2.56”Round $365
20182 12”x3’ 4;Bolt-On 2.56”Round $330
20187 12”x4’ 4;Bolt-On 2.56”Round $376
20236 15”x3’ 5;Bolt-On 2.56”Round $435
20241 15”x4’ 5;Bolt-On 2.56”Round $490
20272 16”x4’ 5;Bolt-On 2.56”Round $576
20309 18”x4’ 6;Bolt-On 2.56”Round $617
Item Number
Size (Dia x L) # of Teeth/Type Adapter RETAIL
PRICE
20372 20”x48” 17;Bullet-Style 2”Hex $1,934
HDF STYLE aUGERS WITH BOLT-ON TEETH - FOR LIGHT TO MODERaTE GROUND CONDITIONS
Item Number
Size (Dia x L)
# of Teeth/Type Adapter RETAIL
PRICE
20304 18”x3’ 6;Bolt-On 2.56”Round $478
20385 24”x3’ 8;Bolt-On 2.56”Round $513
20389 24”x4’ 8;Bolt-On 2.56”Round $750
20056 8”x4’ 2;Bolt-On 2”Hex $319
20092 9”x3’ 3;Bolt-On 2”Hex $299
20096 9”x4’ 3;Bolt-On 2”Hex $325
20145 10”x4’ 3;Bolt-On 2”Hex $365
20183 12”x4’ 4;Bolt-On 2”Hex $376
20269 16”x4’ 6;Bolt-On 2”Hex $576
20306 18”x4’ 6;Bolt-On 2”Hex $617
20386 24”x4’ 8;Bolt-On 2”Hex $735
20474 36”x4’ 11;Bolt-On 2”Hex $1,202
24435 36”x3’ 11, Bolt-On 2.56”Round $742
Hex 2”Round 2.56”Round
Item Number Size Shape RETAIL
PRICE
22845 18”x2” Hex $16622851 24”x2” Hex $17622849 18”x2.56” Round $139
22856 24”X2.56” Round $159
23109 12”x2.56” Round $139
Item Number Description RETAIL
PRICE
22237.PAL 2”Roundto2”HexAdapter $109
21969.PAL 2”Hexto2”RoundAdapter $195
21987 2”Hexto2.56”RoundAdapter $208
22234 2”Roundto2.56”RoundAdapter $121
SEVERAL OTHER SIZES AVAILABLE, CALL GNE FOR DETAILS
ItemNumber Description RETAIL
PRICE
21235 UniversalFrontEndLoaderMount $257
HDR STYLE aUGERS WITH POUND-ON TEETH - FOR SOLID ROCK, FROZEN GROUND * COMPaCTED SOILS
ItemNumber
Size (Dia x L) # of Teeth/Type Adapter RETAIL
PRICE
20204 12”x4’ 4;Pound-On 2.56”Round $527
20256 15”x4’ 6;Pound-On 2.56”Round $668
20073 8”x4’ 4;Pound-On 2”Round $470
20116 9”x4’ 4;Pound-On 2.56”Round $494
20324 18”x4” 6;Pound-On 2.56”Round $781
20403 24”x3’ 8;Pound-On 2.56”Round $1,146
HDC STYLE aUGERS WITH POUND-ON TEETH - FOR DIFFICULT GROUND CONDITIONS
aUGER EXTENSIONS
aUGER aDaPTERS
SPECIaLITY MOUNTING KITS
aUGER BITS
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
PaLa
DIN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
PaLa
DIN
15
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
485
SEVERAL OTHER MODELS AVAILABLE, CALL GNE FOR DETAILS
Skid Hoe
Item Number Description RETAIL
PRICE
23537.MCMAuger Only;X1475SSLwithoutAuger;Acceptsupto36”Dia.Augers;OutputShaft2”Hex;FeaturesReverseRotationforEasyBackout;HydraulicReliefValveProtectsUnitfromDamagewhentheAugerHitsLargeImmoveableObjects;HeavyDutyAllGearDesignforLongLife&MinimalMaintenance
$1,713
24709Auger Drive Assembly*;X1475SSLwithoutAuger;Acceptsupto30”Dia.Augers;OutputShaft2”Hex;FeaturesReverseRotationforEasyBackout;HydraulicReliefValveProtectsUnitfromDamagewhentheAugerHitsLargeImmoveableObjects;HeavyDutyAllGearDesignforLongLife&MinimalMaintenance
$2,329
24685Auger Drive Assembly*;X1475SSLwithoutAuger;Acceptsupto36”Dia.Augers;OutputShaft2.56”Round;FeaturesReverseRotationforEasyBackout;HydraulicReliefValveProtectsUnitfromDamagewhentheAugerHitsLargeImmoveableObjects;HeavyDutyAllGearDesignforLongLife&MinimalMaintenance
$2,329
24710Auger Drive Assembly*;X1975SSLwithoutAuger;Acceptsupto36”Dia.Augers;OutputShaft2”Hex;FeaturesReverseRotationforEasyBackout;HydraulicReliefValveProtectsUnitfromDamagewhentheAugerHitsLargeImmoveableObjects;HeavyDutyAllGearDesignforLongLife&MinimalMaintenance
$2,522
24453 Mini Auger Drive Assembly*;X1500withoutAugerforminiloaders;OutputShaft2.56Roundor2”Square;MiniFacePlateCouplers,Over30AugerBitsAvailabletoMeetyourJobNeeds $2,049
* Auger Drive Assemblies include: drive unit, mounting bracket (21236), mounting cradle (21670), and hose kit with universal flat face couplers (21212).
Item Number Description RETAIL PRICE
† 105299-12-3PT Series 485:IncludesFold-DownPin-onStabilizers,SwingSpeedControl&GrouserPads;12”Std.Bucket(3Teeth);3PtMountingKit $8,865
111637-12.BRA Skid Hoe Assembly(fixed),12”Std.Bucket(3Teeth) $2,678
112140-12-EC.BRA Swing Hoe Assembly,12”Std.Bucket(3Teeth),withElectricControlBox $4,767
BaCKHOE aTTaCHMENTS
aUGERS
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
16
60” Brush Cutter for Skid Steer Loaders•Heavy-duty1/4”thickhighstrengthsteeldeckwithformedstiffenedside plates and heavy-duty skid shoes for added strength and rigidity .•High-speeddualrotationdoubleedgedbladesforbrushandsmalltreesupto4”indiameter.•Stumpjumperforeaseofoperationandgearboxprotection.•Universalhitch;includes1/2”bodyISOcouplersandhoses.•Standardflow,15-20GPM.•Item number17880
17880 Brush Cutter
RETaIL PRICE
$5,023
Item Number Item Description RETAIL
PRICE17880 Brush Cutter 60”;StandardFlow;15-20GPM;IncludesDoubleEdgeBlades $5,023
15330 Brush Cutter 72”;StandardFlow;18-22GPM;IncludesDoubleEdgeBlades $5,597
BRUSH CUTTER ACCESSORIESItemNumber Description RETAIL
PRICE
18512 60”DoubleEdgeBrushCutterBlades(pair) $140
24518 Caster Wheel Assembly for Brush Cutter $76415330 with optional caster wheel
66” Utility Brush GrappleFor Skid Loaders, Utility Loaders, Wheel Loaders and Backhoes•Patenteddesignwithstandsthedemandsofscraphandling, recycling and other tough applications .•Includeshardenedpins,cushionedcylinderkitand cylinder/hose guard .•Item number 11266-0022
RETaIL PRICE
$3,748
SEVERAL OTHER BUCKETS AVAILABLE,
CALL GNE FOR DETAILS
BUCKETS
BRUSH CUTTERS
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
PaLa
DIN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
PaLa
DIN
17
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
Item Number Item Size / Mounting RETAIL PRICE
11866-0022 Utility Scrap Grapple 66”UtilityScrapGrapple $3,779
11872-0022 Utility Scrap Grapple 72”UtilityScrapGrapple $3,960
11266-0022 Utility Brush Grapple 66”UtilityBrushGrapple $3,748
11272-0022 Utility Brush Grapple 72”UtilityBrushGrapple;IncludesBucket,UniversalSkidSteerMount,HosesandCouplers $3,901
107148 Mini Scrap Grapple 42”ScrapGrappleforMiniLoaders;UniversalMount $1,962
2000872 Mini Bucket 42”MiniBucket;4cu.ft.Capacity;UniversalHitch $484
19500 Mini Rock Bucket 42”MiniRockBucket;1-1/8”Tine;UniversalMount $1,010
16294 Rock Bucket 66”RockBucketwith2”TineSpacing;UniversalSkidSteerMount $1,838
16297 Rock Bucket 75”RockBucketwith2”TineSpacing;UniversalSkidSteerMount $1,939
15116 Extreme Duty Bucket 72”LowProfile;StandardFloor;NewHollandHolePattern $1,159
† 10024-0022 Concrete Claw ConcreteClaw;UniversalSSLMounting $2,181
88861-ECB Dozer Blade 84”DozerBladewithHosesandUniversalFlatFaceCouplers;ElectricalControlBox $6,061
18989-19577 Mini Dozer Blade 46”MiniDozerBladewithHydraulic/ElectricValve;FlatFaceCouplers;FitsBobcatMT50/52 $2,633
Scrap Grapple
Brush Grapple
Mini Rock Bucket
Mini Bucket
Rock Bucket Concrete Claw
BUCKET aCCESSORIESItem Number Description RETAIL
PRICE16204.PAL Bolt-On Edge Assembly,78”(9Hole,9”Spacing) $384
Dozer Blade Dozer Blade
SEVERAL OTHER BUCKETS AVAILABLE, CALL GNE FOR DETAILS
BUCKETS
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
18
Never Wheelbarrow or Pump Concrete Again•TheHarleyConcreteChuter™ is the original design for carrying and placing concrete with a skid-steer loader, going where cementtruckscan’tgo.•Accuratelyplacesconcretewithoutthemess;idealforusein construction of backyard patios and pools and pouring deck footings or formed columns or walls .
Item Number Description RETAIL
PRICE2000887 32”MiniPalletForkFrameAssembly;UniversalMount $638
2000888 42”MiniPalletForkFrameAssembly;BobcatMT50/52 $640
103775 42”MiniPalletForkFrameAssembly;FitsBobcatMT50/52 $748
16870 46”PalletForkFrameAssembly;UniversalSkidSteer $580
102028 42”ValueForkTines;3,750lbs.CapacityperPair $447
102030 48”ValueForkTines;3,750 lbs . Capacity per Pair $505
102032 42”ValueForkTines;5,500lbs.CapacityperPair $471
102034 48”ValueForkTines;5,500lbs.CapacityperPair $552
MiniPalletForkFrame
46” Pallet Fork Frame with ForksFor Skid Steer Loaders•Heavy-dutyframedesignedtohandlecapacitiesupto6,000lbs.•42”tines.•Universalskidsteermount.•Excellentsee-throughvisibilityallowsoperatortoseetineends.•Easyoperatoraccessisassuredwithaconvenientnon-skidstep.•Exclusive,patentedloadretentionringhookforsecuringandpositioningpalletforkloads.•Heavygaugebrickguardoffersoutstandingstrengthandsmoothsurfacesforprotection against load damage .• Item number 16870 w/102028RETaIL PRICE
$1,027
SEVERAL OTHER SIZES AVAILABLE, CALL GNE FOR DETAILS
Item Number Description RETAIL
PRICE11050-0022 1/2 Yard Volume Capacity $2,290
11075-0022 3/4 Yard Volume Capacity $2,531
CONCRETE CHUTER
FORKS
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
PaLa
DIN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
PaLa
DIN
19
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
Item Number Item Description RETAIL PRICE
106400 Land Sculptor 78”LandSculptorAssembly $1,6932000857 Mini Leveler 48”Wide;UniversalMount $568
Land Sculptor Land Sculptor Mini Leveler
Item Number Item Description RETAIL PRICE
111487-8-108.BRA Post Driver Manual side shift, Striker Plate and Collar Assemblies, 42 Strokes Per Minute, 48”MaximumStroke $7,152
•ManualSideShift•QuickChangeStrikerPlateandCollarAssemblies•42StrokesPerMinute•48”MaximumStroke•24GPMMaximumFlow•DesignedforSmoothOperationwithNoShockLoadbacktotheSkidSteer•CanbeusedwithBradcoTilt-Attach
6’ Power SeederFor Seeding with Harley Tractor Rakes•May be used as a stand alone seeder or with most Harley TM5 and T6 power box rakes .•Grade,level,rake,removedebrisandseed.Pulverizeandprepare seedbed, dethatch or remove old lawns and weeds . Seed new lawns or overseed all with one tool!•Idealforseedinggrassesandlawnmixturesoverlargeareaswith precise control . •4.5bushelhoppercapacity.•QuickhooktoHarleyrake.• Item number †PS-6
RETaIL PRICE
$5,244
POST DRIVER
POWER SEEDER
LaND SCULPTOR & LEVELER
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
20
PaLa
DIN
Item Number
Drive System
Raking Width
RETAIL PRICE
M.4M Manual 45” $7,169
M.5M Manual 62” $7,643
M.6M Manual 68” $8,926
M.6H Hydraulic 68” $9,819
Power Box RakeFor Use with Skid Steers•Makemoneysooner,fasterandeasierwithaHarleyPowerBoxRake.•Harleyisengineeredtokeeptimeconsuminghandlabortoaminimum.•Ifyoucan’tworkbecausethejobiswet,weedy,hardandrockywitherosion everywhere, it can be dried, flattened, pulverized and ready for seed in 30 minutes .•Workwetsitessooner.Harley’sadjustableRhino-HideBarrierletsyoucontrol particle size and speed the drying of wet areas .•UsetheHarleyraketosoften,level,mixandgrade.•Greatforuseonhardandcompactedinfieldmaterial,trenchrestorationandgolf course construction . •Completelyremoveoldlawns.WithaHarleyyoucaneasilytransformtheoldlawn•ChoosefromManualorHydraulicmodels.
Manual Rake Hydraulic Rake
The Harley Rake is 4 Attachments in 1 •Whyhaularoundallofthoseattachments?•Grade,level,rakeandremovedebris.•Pulverizeandprepareseedbed,removeoldlawnsandweeds•ComparedtothebenefitsofowningaHarley,imitatorsbarelyscratch the surface!
M4.MM5.MM6.M
Walk Behind Power RakeThe Ideal Tool for Landscaping and Seed Bed Preparation•390ccHondaOHVenginew/Cycloneaircleaner.•Hydrostaticself-propelledwithreverse.•36”rakingwidthmakesiteasytomaneuverandfitalmostanywhere.•Rakeheadpivots20ºleftandright.•Adjustablegaugewheelsfordepthcontrol.•Item number †W3
RETaIL PRICE
$3,097
WaLK BEHIND
POWER BOX RaKES
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
21
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
Mini Stump GrinderFor Mini Loaders•Bearingmountedcutterwheelwith square teeth provides smooth, trouble-free operation .•Adjustablewheelcuttingangle allows optimal cutting for any type of stump .•18”diameterwheelwith7”below ground grinding depth . •10-14GPMhydraulicflow; universal mount, flat face couplers •Item number † 101866-FFS-U
RETaIL PRICE
$3,387
Item Number Item Description RETAIL PRICE
LAF5796-0022 5700 Series Snow Blade 96”ODSnowBladewithHydraulicCushionKit;UniversalSSLMounting $3,637
11496-0022.FFC Snow Blade 96”SnowBlade $3,243
11184-RCEK-0022 84”SnowBucket 84”ODMediumDutySnowBucket;ReverseEdgeCutting;UniversalSSLMounting $2,094
† LAF3618-0022 3600 Series Snow Push 8’SnowPush;UniversalSSLMounting $3,852
LAF3618-PBK-0022 3600 Series Snow Push 8’SnowPushwithPullBackKit;UniversalSSLMounting $4,764
13-50727 Snow Blade Edge 9’SnowBladeEdge $411
Snow Blade
3600 Snow Push 3600 Snow Push with Pull Back
84”Snowblower
Stump GrinderFor Skid Steer Loaders•SG26StandardFlow•CompleteControlBoxandHarness Assembly for Skid Steers•26”SquareThreadedSingle-BoltToothCutterWheel;28teeth•12”Belowgroundgrindingdepth•14-28GPMhydraulicflow;•ToothBottomPermitsCuttingfrom Side-to-Side and Vertical Directions.50”flatfacecouplers•Item number 100319-26X72-FF
RETaIL PRICE
$8,207
SNOW
STUMP GRINDERS
PaLa
DIN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
22
36” Walk Behind SweeperPowerful and User Friendly•160ccHondaOHVengine.•36”wideand24”diameterbrushwith2brushspeeds.•Infinitelyadjustableanglingfrom20°left&rightforvariableconditions.•5forwardspeeds,neutralandreverse.•Differentialdrivefor2-wheeltraction and ease of turning . •Completefillbrushforno-streak sweeping .•275lbs.
QCSS Series Angle BroomFor Skid Steers•Nohydrauliclinebreakagewhenchangingcore•Mountstoexistingmountings•ModularDesign-caneasilychangesingleintodual,viceversa•Replaceablehexdrivesystem•Manualanglechange30degreeslefttoright•Hydraulicanglechange30degreeslefttoright`•32”diameterbrush
24” Walk Behind SweeperIdeal for Sidewalk Sweeping, Snow Removal and More•24”wideand14”diameterbrushsweepsdebrisupto6’deep.•350RPMbrushspeedsweepslargeaccumulationsforsnow,thatchanddebris.•Self-propelledwithoneforwardandonereversespeed.•Brushangleseasilyfromthehandlebarsforeaseofuse.•Big3.00x4tiresfortractioninsnoworonturf.•133lbs.•Item number WSP24
RETaIL PRICE
$1,373
Item Number Drive System Brush Brush Angle Hydraulics Details RETAIL
22072MM-0022 Hydraulic 6’ Manual;Poly/WireComboBrush Universal Skid Steer Mounting $5,809
21072MH-0022-LAF9444 Hydraulic 6’ HydraulicBrushAngleChange;Poly/WireComboBrush Universal Skid Steer Mounting $7,376
21072MH-0022-LAF9444
Item Number Series Brush RETAIL
PRICE
† WSP36 WSP Poly/Wire Combo Brush $4,049
WSP36P WSP Poly Brush $4,049
SB Series
VRS Collector Sweeper
aNGLE SWEEPERS
COLLECTOR SWEEPERS
Item Number Series Drive System Description Brush
Size Brush Type Hydraulics Details RETAIL PRICE
20572-M-0022 SB Hydraulic FrontMount;forSkidSteers 6’ Polypropylene & Wire Mix
Universal Skid Steer Mounting $4,708
VRS6M-0022 VRS Hydraulic Heavy Duty Dump Bucket Broom for Skid Steers 6’ Polypropylene & Wire Mix
Universal Skid Steer Mounting $6,290
SWEEPERS
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
PaLa
DIN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
PaLa
DIN
23
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
PaLaDINSold in MN, ND, SD, WI and IA
Mini Tiller
Item Number Description RETAIL PRICE
2008000 Mini Tiller:40”WorkingWidth,UniversalHitch,FlatFaceCouplers $3,514
LAF3468-0022 Tiller:68”WorkingWidth,UniversalSSLMounting $5.400
Tiller
Item Number Item Description RETAIL PRICE
113427.BRA Tree Shear ForSkidLoaders,Cutsupto10”Diameter,OneInchThickHighStrengthShearingBlades $5,519
† LAF1842-0022 42” Tree Spade 42”BallSizeTreeSpade;UniversalSSLMounting $1,492
12203 Tree Boom MaterialHandlerTreeBoom,66”,AttachestoUniversalSkidSteerHitch $857
Tree Shear
Tree Spade Tree Boom
625615615 625
Item Number Series Trencher Type Description RETAIL
PRICE
18393-36X56-FF-4S 615 Mini Trencher 10-16GPM;36”Boom;32Station;4.5”SharkChain;56”FlatFaceCouplers,UniversalMount $5,240
18393-36X56-FF-6S 615 Mini Trencher 10-16GPM;36”Boom;32Station;6”SharkChain;56”FlatFaceCouplers,UniversalMount $5,240
89473-82-FF 625 Universal Skid Steer Mounting 48”Boom;6”WChainw/ToothEveryStation;Two82”LHoses;UniversalFlatFaceCouplers $5,192
TRENCHERS
TILLERS
TREE CaRE
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
24
PaLa
DIN
18393-36X56-FF-4S 615 Mini Trencher 10-16GPM;36”Boom;32Station;4.5”SharkChain;56”FlatFaceCouplers,UniversalMount $5,240
18393-36X56-FF-6S 615 Mini Trencher 10-16GPM;36”Boom;32Station;6”SharkChain;56”FlatFaceCouplers,UniversalMount $5,240
MINI aTTaCHMENTSMini Auger
Mini Stump Grinder Mini Trencher
MiniForks
Mini Bucket
Mini Rock Bucket
Item Number Description RETAIL
PRICE
24453 Mini Auger Drive Assembly*;X1500withoutAugerforminiloaders;OutputShaft2.56Roundor2”Square;MiniFacePlateCouplers,Over30AugerBitsAvailabletoMeetyourJobNeeds $2,049
19500 Mini Rock Bucket 42”MiniRockBucket;1-1/8”Tine;UniversalMount $1,010
107148 Mini Scrap Grapple 42”ScrapGrappleforMiniLoaders;UniversalMount $1,962
2000872 Mini Bucket 42”MiniBucket.Capacity;UniversalHitch $484
18989-19577 Mini Dozer Blade 46”MiniDozerBladewithHydraulic/ElectricValve;FlatFaceCouplers;FitsBobcatMT50/52 $2,633
101950-FF-UNIV Mini Bucket Broom 42”MIniBucketBroom;FlatFaceCouplers;UniversalMount $4,469
MINI BUCKET
MINI aUGER
MINI FORKS2000887 32”MiniPalletForkFrameAssembly;UniversalMount $638
2000888 42”MiniPalletForkFrameAssembly;BobcatMT50/52 $640
103775 42”MiniPalletForkFrameAssembly;FitsBobcatMT50/52 $748
2008000 Mini Tiller:40”WorkingWidth,UniversalHitch,FlatFaceCouplers $3,514
† 101866-FFS-U Mini Stump Grinder: 10-14GPMhydraulicflow;Universalmount,flatfacecouplers,18”diameterwheel $3,387
101868.BRA Universal Mount for Mini Stump Grinder $376
2000857 Mini Leveler 48”Wide;UniversalMount $568MINI LEVELER
MINI STUMP GRINDER
MINI TILLER
MINI TRENCHER
2000862.PAL MiniMulti-TaskTool;UniversalMount $475MINI MULTI-TaSK TOOL
† 100295-FF-UNIV 48”X24”UniversalMount;FlatFaceCouplers $4,378MINI aNGLE BROOM
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
25
Order Online www.gnedi.com Order Online www.gnedi.comPaLaDINSold in MN, ND, SD, WI and IA
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
Item Number Engine Stage Clearing
Width Drive System Starting System Clearing Height
Max. Discharge Distance
Weight RETAIL PRICE
HS520A 160cc OHC Single 20” Manual, Auger
Assisted Drive Recoil 12” 26’ 76 lbs . $729
HS520KAS 160cc OHC Single 20” Manual, Auger
Assisted Drive120V AC w/Recoil
Backup 12” 26’ 87 lbs . $829
HS724WA 200cc OHC 2-Stage 24” Hydro . Self Propelled
Wheel DriveRecoil w/Automatic
Decompression 20” 46’ 203 lbs . $2,299
HS724TA 200cc OHC 2-Stage 24” Hydro . Self Propelled
Track DriveRecoil w/Automatic
Decompression 16.5” 46’ 198 lbs . $2,469
HS928WA 270cc OHC 2-Stage 28” Hydro . Self Propelled
Wheel DriveRecoil w/Automatic
Decompression 20” 49’ 211 lbs . $2,579
HS928WAS 270cc OHC 2-Stage 28” Hydro . Self Propelled
Wheel Drive120V AC Electric
Start w/Recoil Backup 20” 49’ 218 lbs . $2,789
HS928TA 270cc OHC 2-Stage 28” Hydro . Self Propelled
Track DriveRecoil w/Automatic
Decompression 20” 49’ 231 lbs . $2,709
HS928TAS 270cc OHC 2-Stage 28” Hydro . Self Propelled
Track Drive120V AC Electric
Start w/Recoil Backup 20” 49’ 240 lbs . $2,909
† HS1132TA 340cc OHC 2-Stage 32” Hydro . Self Propelled
Track DriveRecoil w/Automatic
Decompression 20” 56’ 254 lbs . $3,189
† HS1132TAS 340cc OHC 2-Stage 32” Hydro . Self Propelled
Track Drive12V Electric Start w/
Recoil Backup 20” 56’ 260 lbs . $3,399
Honda SnowblowersDesigned to Perform with Strength and Precision•Equippedwithlegendary,easy-startingHonda4-strokeenginesthatconsistentlydeliversmoothandreliablepower.•EveryHondaSnowblowermodelisdesignedtooperatesimply,safelyandcomfortably.•Allofthecontrolsarelaidoutlogicallyandplacedtoallowasureandeasygrip,evenwithheavyglovesormittens.•HondaSnowblowersarepowerfulandwell-craftedpiecesofqualitymachinerythataredesignedtolastforyears.
Honda Snowblower AccessoriesItem Number Description Fits Snowblower Model(s) RETAIL
PRICE
† 06350-767-100AH WorkLightKit HS724TA, HS724WA $51
06350-768-000AH WorkLightKit HS928WA, HS928WAS, HS928TA, HS928TAS $51
† 06760-768-000AH DriftBreakerKit All Two-Stage Honda Snowblowers $60
04700-768-E100 Skid Shoes All Two-Stage Honda Snowblowers $39
† 04700-768-9688 Cold Weather Cab All Two-Stage Honda Snowblowers $163
HS1132TAS
HS520AHS724WA
Pleasereadtheowner’smanualbeforeoperatingyourHondaPowerEquipment.©2011AmericanHondaMotorCo.,Inc.
HO
NDa P
OW
ER EQ
UIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
26
Full Size Mid Tine TillerClean, Quiet and Versatile•160ccHondaOHVengine.•26”tillingwidth.•Oneforwardspeedchain-drivetransmission.•Frontengineguardprotectsengineandprovidesatie-downpoint.•Commercial-gradefenders. •Easilyadjustabledragbar.•Convenienttransportwheelwithone-touch“swingup”feature.•3-positionhandleadjustment. •Reinforcedhandlebarandenginebed.•130lbs.• Item number FC600AN
Compact Size Mid Tine TillerThe Perfect Balance of Power and Maneuverability•Powerful,57ccHondaOHVengine.•21”tillingwidth(12”withoutertinesremovedfornarrowbeds).•Easy-to-use,retractabletransportwheel.•Operator-friendlycontrols.•3-positionhandleheightadjustment.•MeetsallCARB&EPAemissionlevelrequirements.•Optionalsidedisckitandfurrowattachmentavailable.•50lbs.• Item number F220AN
Item Number Description RETAIL PRICE
06720-V14-620 Side Disk Kit: Enhances Tilling Operations $27
F220A Attachment
Mini Tiller/Cultivator Lightweight and Powerful•25ccGX254-strokeenginethatusesregularfuel.•PatentedHybridTinescultivateanddig.•Ruggedtransmissionisrental-dutydurable.•Handlebardesignwithlarge-diameterpipeprotectsenginefromallsides,andfoldsforcompactstorage. •Adjustabledragbarandremovablerearwheels.•Fullyassembledinthebox.Justaddoil(includedwithunit)andgas,andyou’rereadytogo!•Optionalaerator,borderedger,andde-thatcherattachmentsavailable.•Only29lbs.• Item number FG110K1AT
Aerator De-Thatcher
Border Edger Digging Tines
Mini Tiller/Cultivator AttachmentsItem Number Description RETAIL
PRICE06727-V25-000 Aerator: Allows Air to Circulate, Improving Soil Condition $144
† 06729-V25-013 De-Thatcher: Combats Matted Turf & Removes Dead Clippings (s/n 120000 and up) $16006728-V25-000 Border Edger: Defines Driveways and Sidewalk Edges for a Manicured Look $38
† 06726-V25-010 Digging Tines: Turns Soil Easily for Planting and Cultivation $63
SideDiskKit
RETaIL PRICE
$389
RETaIL PRICE
$899
RETaIL PRICE
$1,499Pleasereadtheowner’smanualbeforeoperatingyourHondaPowerEquipment.©2011AmericanHondaMotorCo.,Inc.
Order Online www.gnedi.com Order Online www.gnedi.comHONDa POWER EQUIPMENTSold in MN, ND and SD
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
HO
NDa P
OW
ER E
QUIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
HO
NDa P
OW
ER EQ
UIP
MEN
T
27
Order Online www.gnedi.com Order Online www.gnedi.comHONDa POWER EQUIPMENTSold in MN, ND and SD
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
Honda Weed TrimmersSetting the Standard for Efficiency & Reliability•Easy-startingHondaMini4-strokeenginesgiveofflessexhaustthan 2-stroke engines . •Noneedtomixgasandoil.•Rubbermountedengineforvibrationdampening.•Durableflexshaft.•2motiontriggerthrottlecontrol.•10mm/1.25LMHarbor.•Heavy-dutygrassguardforaddedsafety. •Quick-releaseshoulderharnessandsafetyglassesincludedwith25cc and 31cc models .•35ccmodelfeaturesbike-stylehandlesandincludesa10”brush blade with blade barrier, a deluxe double harness and safety glasses .
Item Number Engine Cutting Head Handle Style Weight RETAIL PRICE
HHT25SLTAT 25cc Mini 4-Stroke Tap&GoSemi-MaticNylonHead;.095”LineStd. Low-Vibration, Easy-GripFoam 13 lbs . $349
HHT35SLTAT 31cc Mini 4-Stroke Tap&GoSemi-MaticNylonHead;.095”LineStd. Low-Vibration, Easy-GripFoam 14 .8 lbs . $379
HHT35SUKAT 35cc Mini 4-Stroke ManualFeedHead;.095”LineStd. Bicycle Style Dual Handle Bars 15 .4 lbs . $429
A B C D
Item Number Description RETAIL PRICE
A † 72560-VF9-C12 ManualFeedHead;EasilyAdjustable,Spring-LoadedTwin.095”LinesDeliveraPolishedCut $18
B 72560-VH8-642AH Semi-MaticHead;AQuickTaponaFlatSurfaceSuppliesTwo.095”LinesforLightJobs $21
C 72560-VF9-C41 Semi-ProHead;Pro-GradeSemi-MaticHeadDispensesTwo.095”LinesWithaQuickTap $21
D 72560-VF9-C33AH Pro-TapHead;HeavyDutyHeadFeedsTwo.105”LinesWithaTaponaFlatSurface $23
-- 72511-VF9-B00AH 4-PointMetalBlade;DesignedforUseinDenseWeedsandThick,HeavyGrass $12
-- 72511-VF9-F00AH 10”CircularBlade;SpecificallyDesignedforClearingHeavyBrushandSaplings $19
-- 06631-VH8-740 BarrierKit;IncludesHarness,BarrierandallHardware;Incl.Shieldsfor4/6/8ToothandSawBlades $75
HHT25SLTAT
Weed Trimmer/Brushcutter Accessories
Rental Duty Rear Tine TillerA Powerful, Earth Churning Machine•240ccOHVenginew/cycloneairfilter.•20”tillingwidth.•Heavy-dutytines,housing,andreardebrisshield.•Operator-friendlycontrols.•Easy“firsttimeuse,”includingone-steptineengage&disengagecontrol.•Protectivefrontbumper.•3speedsplusreverse.•4-positionhandlebar.•275lbs.• Item number FRC800ACRETaIL PRICE
$2,699
Pleasereadtheowner’smanualbeforeoperatingyourHondaPowerEquipment.©2011AmericanHondaMotorCo.,Inc.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
28
HRR/HRS SeriesResidential Mowers•21”cuttingwidth.•Long-lastingsteeldeckwith6cuttingheightadjustmentsfrom1”-3.5”.•160ccHondaOHCengine.•ZoneStartflywheelbrakesafetysystemquicklystopstheblade without operator presence .•ModelHRR216K6VXAfeaturesRotoStop™ blade brake clutch .•Thetwin-bladeHondaQuadraCutSystem™ (available on grass bagging models) uses 4 cutting surfaces to cut grass into tiny pieces . Finerclippingstakeuplessvolume,sothebagfills up less often . •ExclusiveHondaAdjustableSmartDrive(VKAandVXAmodels) allows operator to easily control mower speed while resting their handsontheergonomically-designed“paddle”stylecontrolhandle.
Item Number Transmission/Blade Control Mulching System Side/Rear
Discharge Rear Grass Bag Weight RETAIL PRICE
HRS216K4PDA Push;FlywheelBrake Single Blade Side Discharge Optional 62 lbs . $389
HRS216K4SDA SingleSpeed;FlywheelBrake Single Blade Side Discharge Optional 69 lbs . $439
HRR216K7PDA Push;FlywheelBrake QuadraCut™ Twin Blade Side (Optional) 2.4Bushel;Included 75 lbs . $439
HRR216K7VKA SmartDrive™VariableSpeed;FlywheelBrake QuadraCut™ Twin Blade Side (Optional) 2.4Bushel;Included 94 lbs . $479
HRR216K7VXASmartDrive™ Variable Speed w/RotoStop™ Blade Brake Clutch
QuadraCut™ Twin Blade Side (Optional) 2.4Bushel;Included 94 lbs . $579
Item Number Description RETAIL PRICE
06814-VG4-010 SideDischargeChute;ConvertsRear-BagLawnMowertoSide-Discharge $33
81560-VG4-000 LeafShredder;FitsHRR216Mowers;ChopsUpLeavesEnteringtheGrassBagforLessFrequentEmptying $31
† 08P59-VE2-010AH UniversalLawnMowerCoverforallHondaWalkBehindMowersw/21”Decks $40
HRR/HRS Series Attachments & Accessories
Item Number Starting System Blade Control Transmission Weight RETAIL
PRICE
HRC216K3PDA Recoil Start FlywheelBrake Push 97 lbs . $749
HRC216K3HXA Recoil Start Rotostop™ Blade Brake Clutch Honda Cruise Control™ Hydrostatic Drive 122 lbs . $1,249
HRC SeriesCommercial Duty Mowers•HondaGSSeries160ccOHC/OHVenginewithexcellentpower-to-weightratio.•Rugged,21”cut,steelmowingdeckwithreinforcedenginebed.•9”Xenoy™wheels(ballbearingsinallwheels).•Protectivedeckedgeguards.•Frontbumper/tiedownstandard.•Heavy-dutyreinforcedhandleswithsupportbrackets.•Largecapacityfueltank.•Large,2.4busheleasy-emptygrassbagincluded.•8Mowingheightsfrom3/4”to4”.
Item Number Description RETAIL PRICE
06180-ZE6-820 SparkArrestorKit $20
† 08P59-VE2-010AH UniversalLawnMowerCoverforallHondaWalkBehindMowersw/21”Decks $40
HRC Series Attachments & Accessories
HRC216K3HXA
HRR216K7VXA
Featuring Honda’s Exclusive SmartDrive™
Variable Speed Control System
Featuring Honda’s Exclusive Cruise Control System
Infinitely Variable Speed Controlon HRC216K3HXA
Pleasereadtheowner’smanualbeforeoperatingyourHondaPowerEquipment.©2011AmericanHondaMotorCo.,Inc.
HO
NDa P
OW
ER E
QUIP
MEN
TOrder Online www.gnedi.com Order Online www.gnedi.comHONDa POWER
EQUIPMENTSold in MN, ND and SD
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
29
Order Online www.gnedi.com Order Online www.gnedi.comHONDa POWER EQUIPMENTSold in MN, ND and SD
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
HRX SeriesPremium Residential Mowers with 21” Cut•FeaturingHonda’sexclusiveVersamow™ System, which mulches, bags and/or discharges clippings with no attachments or tools required .•ClipDirector™ regulates how much is bagged or mulched .•Extremelydurable,impact-resistantNeXite™ deck will not dent, rust or corrode over time .•MicroCut™ twin blades result in ultra fine clippings for better mulching and increased bag capacity when bagging or leaf shredding .•SmartDrive™ variable speed transmission allows the user to easily control the speed while restingtheirhandsonthehandlebars.(ModelHRX217K2VKAonly).•Powerful,190ccHondaOHCengine.•7-positionmowingheightrangefrom3/4”to4”.•2.5bushelgrassbagincluded.
Item Number Starting System Blade Control Transmission Weight RETAIL
PRICE
HRX217K2VKA Recoil Start FlywheelBrake SmartDrive™ Variable Speed Self-Propelled 87 lbs . $699
HRX217K2HXA Recoil Start Rotostop™ Blade Brake Clutch Honda Cruise Control™ Hydrostatic Drive 93 lbs . $799
HRX217K2HMA Electric Start Rotostop™ Blade Brake Clutch Honda Cruise Control™ Hydrostatic Drive 103 .6 lbs . $899
HRX Series Attachments & Accessories
Item Number Item RETAIL PRICE
31670-HPE-000 Battery Tender Plus: KeepsBatteryinTopConditionDuringOffSeason;12V/1.25AIndoor;FitsHRX217HMA $71
† 32670-HPE-800 Waterproof 800 Tender: KeepsBatteryinTopConditionDuringOffSeason;12V/800mA;Indoor/Outdoor $59
† 06761-VH7-000AH Deck Guard Kit: All-Steel Guards Protect Sides of Deck from Wear $13† 08P59-VE2-010AH Lawn Mower Cover: UniversalLawnMowerCoverforallHondaWalkBehindMowersw/21”Decks $40
Featuring Honda’s Exclusive VersaMow™ System,for No-Tools-Required Transition from Mulching,
Bagging or Side Discharge Mowing
MicroCut™ Twin Blades for Ultra Fine Clippings, Better Mulching and Increased Bag Capacity
Honda’s Innovative Electric StartThe HMA model features electric start
Featuring Honda’s Exclusive SmartDrive™
Variable Speed Control Systemon model HRX217K2VKA
The HRX Deck is Constructed of Advanced and Extremely Durable NeXite™ Material That Does Not
Dent, Rust or Corrode Over Time. Developed for Honda, NeXite™ is Exclusive on Honda Lawnmowers
Roto-Stop® is what you need to stop the blade without shutting off the
engine. Honda Roto-Stop® does it in a flash. That way, you can empty
the bag without having to restart the engine. (HXA & HMA only)
Pleasereadtheowner’smanualbeforeoperatingyourHondaPowerEquipment.©2011AmericanHondaMotorCo.,Inc.
HRX217K2HMAHRX217K2HXAHRX217K2VKA
Now backed by a full 5 Year WarrantyBest in the Industry!
HO
NDa P
OW
ER EQ
UIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
30
WX SeriesLightweight General Purpose Water Pumps•PoweredbyHonda’seasystarting,quietrunningM-4series4-cycleengines.•Exceptionalperformanceinatrulylight-weightpackage.•Anexcellentchoiceforhomeowners,gardenersandboatowners.•Hose,clampsandstrainerincludedwithmodelWX10K1AT.
Item Number Engine Port Size Max. GPM Max.
Pressure Total Head Self-Priming Weight RETAIL PRICE
WX10K1AT 25cc Mini 4-Stroke 1” 37 51 PSI 118’ Yes 13 .4 lbs . $460
WX15AX2 50cc Mini 4-Stroke 1.5” 72 54 PSI 125’ Yes 20 lbs . $530
WH SeriesHigh Pressure De-Watering Pumps•Highpressurewithlowerflow.•Thebestapplicationsforthesewaterpumpsarewherehigherpressureisrequired, such as when using sprinklers or a nozzle .•Castironvoluteandimpeller.
Item Number Engine Port Size Max. GPM
Max. Pressure Total Head Lift Self-Priming Weight RETAIL
PRICE
WH-15XK1C1 120cc Honda OHV 1.5” 115 55 PSI 127’ Yes 49 lbs . $710
WH-20XK1AC1 160cc Honda OHV 2” 134 61 PSI 141’ Yes 52 lbs . $760
WB SeriesGeneral Purpose Water Pumps•PoweredbyHonda’sIndustrialseriesGXengines,heavydutyframeanddurable, cast iron volute and impeller, these water pumps will provide outstanding performance for general clear water pumping applications .•Forconstruction,agricultureandrentaluse,thisruggedwaterpumpdeliversHonda’srenowned premium performance and quality at a value price .
Item Number Engine Port Size Max.
GPMMax.
Pressure Total Head Lift Self-Priming Weight RETAIL PRICE
WB20XK2 120cc Honda OHV 2” 152 40 PSI 92’ Yes 46 lbs . $530
WB30XK2 160cc Honda OHV 3” 275 37 PSI 85’ Yes 60 lbs . $670
WSP SeriesSubmersible Pumps•Housedinrugged,stainlesssteelcasings,thesubmersiblepumpsintheWSPSeriesofferautomaticstarting,built-inthermalautoresetand20’or50’heavy-duty,115Vcord.•Choosefromtrashortopdischargemodelstomeetyourapplicationneeds.•Designedforavarietyofresidentialandcommercialsumpapplications.
Item Number HP/Engine Port Size Max. Solid Material Size
Max. GPM Discharge Switch Type Cord
Length Weight RETAIL PRICE
WSP33K1AA 1/3HP;115V 1.25”FNTP 0.375”dia. 40 Top Non-MercuryAutoFloat 20’ 11 lbs . $240
† WSP50AA 1/2HP;115V 2”FNTP 2.0”dia. 110 Side Non-MercuryAutoFloat 25’ 36 lbs . $650
WSP53AA 1/2HP;115V 1.5”FNTP 0.375”dia. 44 Side Non-MercuryAutoFloat 50’ 27 lbs . $510
† WSP73AA 3/4HP;115V 1.5”FNTP 0.375”dia. 54 Top Non-MercuryAutoFloat 50’ 27 lbs . $560
† WSP100AA 1HP;115V 2”FNTP 2.0”dia. 150 Side Non-MercuryAutoFloat 25’ 41 lbs . $740
WSP100AA
WX15AX2
WH-15XK1C1
WB20XK2
Pleasereadtheowner’smanualbeforeoperatingyourHondaPowerEquipment.©2011AmericanHondaMotorCo.,Inc.
Order Online www.gnedi.com Order Online www.gnedi.comHONDa POWER EQUIPMENTSold in MN, ND and SD
HONDa POWER EQUIPMENT
Sold in MN, ND and SD
HO
NDa P
OW
ER E
QUIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
HO
NDA P
OW
ER EQ
UIP
MEN
T
31
Order Online www.gnedi.com Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
HONDA POWER EQUIPMENT
Sold in MN, ND and SD
Multi-Purpose PumpSpecially Designed for Transferring Chemicals and Other Liquids• The Honda Multi-Purpose Pump is the choice when pumping of approved industrial and agricultural chemicals is required. • This pump is equipped with EPDM seals and a rugged fiberglass reinforced polyester housing to ensure reliable operation while pumping approved chemicals.• Chemical resistant design for pumping substances such as fertilizers, soaps and acids. • Approved Chemicals: Ammonium Thiosulfate, Avenge, Banvel, Bladex, Extrazine, Lasso, Phosphoric Acid Solutions, Ranger, Round-up, Sutan and more. See owner’s manual for a complete listing of approved chemical substances.
Item Number Engine Port
SizeMax. Solid
Material SizeMax. GPM
Max. Pressure
Total Head Lift
Self-Priming Weight RETAIL
PRICE
WT-20XK3A 160cc Honda OHV 2” 13/16” dia. 187 42 PSI 98’ Yes 104 lbs. $1,470
WT-30XK3A 240cc Honda OHV 3” 1-1/16” dia. 319 39 PSI 89’ Yes 132 lbs. $1,730
WT-40XK2A 340cc Honda OHV 4” 1-1/16” dia. 433 37 PSI 85’ Yes 172 lbs. $2,610
WT SeriesConstruction Trash Pumps• Designed to allow solids (sticks, stones, and debris) up to 1-1/16”. (depending on model) to flow through the pump without clogging, making them ideal for construction sites. • WT pumps are designed to move lots of water and are capable of handling solids without clogging. • A quick cleanout port and easy maintenance features ensure long service life. • Conical, cast iron impeller for peak pumping performance.• Honda Trash Pumps are the ultimate choice for contractors and rental applications.
Item Number Engine Port Size Max. GPM
Max. Pressure Total Head Self-Priming Weight RETAIL
PRICE
WMP20XA1T 160cc OHV w/Oil Alert™ 2” 220 45 PSI 105’ Yes 56 lbs. $550
Item Number Engine Port Size Max. GPM
Max. Pressure Total Head Self-Priming Weight RETAIL
PRICE
WDP30XK1AT 120cc OHV w/Oil Alert™ 3” 80 N/A 16’ dry, 24’ primed Yes 120 lbs. $1,980
Diaphragm PumpLow-Volume Design Pumps Mud, Trash, Water and More• Diaphragm Pumps are one type of pump that is not centrifugal in configuration. • These positive displacement pumps are low volume pumps that are not limited to clear water; a diaphragm pump can pump mud, trash and more. • Capable of running dry and pumping water with greater than 25% solids by volume. • Features such as special rock channel and spring loaded connecting rod prevent damage from sediment buildup.• Perfect for slow seepage situations. You can count on Honda to keep the site dry.
WT30XK3A
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
32
Item Number Diameter Fits Honda Pump Model(s) RETAIL PRICE
† 124015-1145-PINKT 1.5” WX15 $112
124020-1145-PINKT 2” WB20, WT20, WMP20, WDP20 $130
124030-1145-PINKT 3” WB30, WT30, WDP30 $243
124040-1145-PINKT 4” WT40 $414
Boxed Pin Lug Hose Kits With Pin Lug Couplings• Includes 20’ green suction hose and 50’ blue discharge hose.• 3/8” hole steel strainer included.• Coupled with male & female pin lug couplings.
Item Number Diameter Fits Honda Pump Model(s) RETAIL PRICE
124015H-1145-WHKT 1.5” WH15 $150
† 124020H-1145-WHKT 2” WH20 $191
Boxed Pin Lug Hose Kits for High Pressure Pumps With Pin Lug Couplings• Includes 20’ green suction hose and 50’ blue discharge hose with nozzle.• 1/8” hole steel strainer included.• Coupled with male & female pin lug couplings.
Boxed Camlock Hose Kits With Camlock Couplings• Includes 20’ green suction hose and 50’ blue discharge hose.• 3/8” hole steel strainer included.• Coupled with male & female pipe and nipple, which includes male and female adapters.
Item Number Diameter Fits Honda Pump Model(s) RETAIL PRICE
† 124015-1145-CLKT 1.5” WX15 $146
124020-1145-CLKT 2” WB20, WT20, WMP20, WDP20 $165
124030-1145-CLKT 3” WB30, WT30, WDP30 $307
† 124040-1145-CLKT 4” WT40 $499
Center Punch Clamp Tool and ClampsFor All Honda Pumps• Heavy-duty center punch style tool.• Galvanized band clamps.
Item Number Description Fits Honda Pump Model(s)
RETAIL PRICE
† BCP-P1000H Center Punch Tool All 1”- 4” Pumps $320
† BCP-60-00H 1” Center Punch Clamp WX10 $1
† BCP-80-00H 1.5” Center Punch Clamp WX5, WH15 $1
† BCP-10-00H 2” Center Punch Clamp WB20, WH20, WT20, WMP20 $2
† BCP-16-00H 3” Center Punch Clamp WB30, WT30, WDP30 $2
† BCP-20-00H 4” Center Punch Clamp WT40 $2
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc.
HO
NDA P
OW
ER E
QUIP
MEN
TOrder Online www.gnedi.comHONDA POWER
EQUIPMENTSold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
33
Order Online www.gnedi.comAPACHE HOSE
Sold in MN, ND, SD, WI and IA
PVC Discharge Hose Kits With Male and Female Pipe Threaded Couplings
PVC Suction Hose Kits With Male and Female Pipe Threaded Couplings
Male and Female Quick CouplersWith Cam and Groove Assembly• Adapters mount directly to the pump, which allows it to accept quick-couple hoses.
Item Number Dia. x Length Weight RETAIL PRICE
98128093 1” x 20’ 10 lbs. $35
98128010 1.5” x 20’ 12 lbs. $49
98128040 2” x 20’ 15 lbs. $76
98128055 3” x 20’ 20 lbs $129
98128059 4” x 20’ 35 lbs. $213
Item Number Dia. x Length Weight RETAIL PRICE
† 98138110 1” x 25’ 10 lbs. $43
98138010 1.5” x 25’ 15 lbs. $39
98138045 2” x 50’ 15 lbs. $58
98138065 3” x 50’ 20 lbs. $107
98138075 4” x 50’ 30 lbs. $133
Item Number Coupler Type Diameter RETAIL PRICE
† 50400040 Female MNPT (A) 1.5” $11
50400050 Female MNPT (A) 2” $12
50400060 Female MNPT (A) 3” $20
50400070 Female MNPT (A) 4” $28
† 50400000 Male FNPT (B) 1.5” $5
50400010 Male FNPT (B) 2” $5
50400020 Male FNPT (B) 3” $11
50400030 Male FNPT (B) 4” $17
Strainers Item Number Type RETAIL
PRICE70002780 2” Polypropylene Strainer $9
70002800 3” Polypropylene Strainer $22
70000504 2” Steel Strainer - Round Holes $19
† 70001500 3” Steel Strainer - Round Holes $28
Gaskets and Spanner Wrench Item Number Type RETAIL
PRICE43081292 2” Short Shank Gasket $1
43081314 3” Short Shank Gasket $1
43081349 4” Short Shank Gasket $1
43106007 2” Pin Lug Spanner Wrench $10
43107003 3” Pin Lug Spanner Wrench $13
43107518 4” Pin Lug Spanner Wrench $13
APACHE H
OSE
A
B
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
34
Economy Series Generators• Honda’s Economy Series Generators are a reliable source of “no frills” portable power with all of the durability you expect from Honda.• The Honda EN models are designed for homeowner use and feature Honda’s GC series Premium Residential engine for easy starting and economical operation. • Full frame protection.• Automatic voltage regulation for stable power (EP model). • All models feature circuit protection.• All Honda power generator models are EPA and CARB compliant.
Item Number Engine Wattage Max. AC Output
Rated AC Output
Max. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run
Time Per Tankful*
Dimensions Weight RETAIL PRICE
EG4000CLAT 270cc Honda OHV 4,000
120V/240V4,000W
33.3/16.7A
3,500W29.2/14.6A N/A 72dB 6.3 gal. 15.7 hours
@ 1/2 load
26.8” L22.8” W22.5” H
155 lbs. $1,699
EG5000CLAT 390cc Honda OHV 5,000
120V/240V5,000W
41.2/20.8A
4,500W37.5/18.6A N/A 73dB 6.3 gal. 11 hours @
1/2 load
26.8” L22.8” W22.6” H
177 lbs. $1,860
EG6500CLAT 390cc Honda OHV 6,500
120V/240V6,500W
54.2/27.1A
5,500W45.8/22.9A N/A 74dB 6.3 gal. 10 hours @
1/2 load
26.8” L22.8” W22.7” H
182 lbs. $2,110
*Based on 1/2 load.
EP2500X1AHEN2500AL
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
Item Number Engine Wattage Max. AC Output
Rated AC Output
Max. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run
Time Per Tankful*
Dimensions Weight RETAIL PRICE
EN2500AL 160cc Honda OHC 2,500
120V 2,500W 20.8A
2,300W 19.2A N/A 76dB 2.9 gal. 7.3 hours
21.3” L17.5” W17.3” H
71 lbs. $579
EP2500X1AH 160cc Honda OHV 2,500
120V 2,500W20.8A
2,300W 19.2A N/A 69dB 3.83 gal. 10.2 hours
23.5” L17.1” W17.2” H
101 lbs. $920
*Based on rated load.
EG5000CLATEG4000CLAT EG6500CLAT
The New EG Economy Series• New Digital Auto Voltage Regulator (DAVR) holds the voltage stability within a +/- 1% change during operation to which the US standard is 60hZ.• Powered by the New GX Honda engine with Digital Capacitive Discharge Ignition (DCDI) Ignition and manual choke for increased reliability and durability. • Full frame and 6.3 gal. tank with fuel gauge design for added protection and long run times.• 20A circuit protection on both 120v outlets. • Centralized controls to allow for easier operation of the unit.
NEWNEWNEW
Order Online www.gnedi.com Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
HONDA POWER EQUIPMENT
Sold in MN, ND and SD
HO
NDA P
OW
ER E
QUIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
HO
NDA P
OW
ER EQ
UIP
MEN
T
35
Order Online www.gnedi.com Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
HONDA POWER EQUIPMENT
Sold in MN, ND and SD
ItemNumber Engine Wattage Max.
AC OutputRated
AC OutputMax. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run
Time Per Tankful*
Dimensions DryWeight
RETAIL PRICE
EB5000i337cc Honda OHV w/Oil Alert™
5,000120/240V 5,000W
41.7/20.8A
5,500W45.8/22.9A N/A 68dB 4.5 gal. 5.7 hours
31.9” L26.4” W30.7” H
198 lbs. $3,307
* Based on rated load.
5000 Watt i-Pro Industrial Inverter Generator• Featuring i-Monitor display which provides information for hours of operation, wattage and engine speed as well as diagnostics for convenient dealer servicing.• Load-dependent Eco-Throttle gives outstanding fuel economy and lower exhaust emissions.• All EB series Honda generators come standard with full G.F.C.I. circuit protection for regulated job sites.
Item Number Engine Wattage Max. AC Output
Rated AC Output
Max. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run
Time Per Tankful*
Dimensions DryWeight
RETAIL PRICE
EB3000cKAN 200cc Honda OHV 3,000
120V3,000W25.8A
2,600W21.7A
12V144W12A
68dB 2.7 gal. 6 hours17.3” L
15.7” W18.9” H
68 lbs. $1,530
EB4000XAT 270cc IGXHonda OHV 4,000
120/240V4,000W
33.1/16.7A
3,500W29.2/14.6A N/A 71dB 6.2 gal. 10.1 hours
41.9” L27.2” W29.2” H
185 lbs. $2,110
EB5000XK3AT 390cc IGXHonda OHV 5,000
120/240V5,000W
41.7/20.8A
4,500W37.5/18.8A N/A 72dB 6.2 gal. 8.1 hours
41.9” L27.2” W29.2” H
214 lbs. $2,280
EB6500X1AT 390cc IGXHonda OHV 6,500
120/240V6,500W
54.1/27.1A
5,500W45.8/22.9A N/A 75dB 6.2 gal. 6.9 hours
41.9” L27.2” W29.2” H
220 lbs. $2,750
* Based on rated load.
The New EB Industrial SeriesPortable Generators• The new EB series boasts the new IGX engine and the all new Honda Exclusive iAVR Power Advantage. This allows for additional power for up to 10 seconds to start larger equipment. (Additional Ouput: EB4000: 5,000W, EB5000: 7,000W, EB6500: 7,000W)• All EB series generators come standard with full G.F.C.I. circuit protection for regulated job sites. • Quieter operation, increased fuel efficiency, and faster reaction times to loads versus its predecessor.• Features a full frame and full 6.3 gallon tank with fuel gauge design for added protection and long run times.
EB3000cKAN EB5000XK3AT EB6500X1ATEB4000XAT
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
NEWNEWNEW
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
36
Item Number Engine Wattage Max. AC Output
Rated AC
Output
Max. DC
Output
Noise Level
Fuel Tank Cap.
Approx. Run
Time Per Tankful*
Dimensions DryWeight
RETAIL PRICE
EM5000iSAN
340cc Honda OHV w/Electric Start and Oil Alert™
5,000120/240V5,000W
41.7/20.8A
4,500W37.5/18.8A
N/A 68dB 4.5 gal. 5.7 hours
31.9” L26.4” W27.2” H
217 lbs. $3,900
* Based on rated load.
5000 Watt i-DeluxeDeluxe Inverter Generator• Featuring i-Monitor display which provides information for hours of operation, wattage and engine speed as well as diagnostics for convenient dealer servicing.• Eco-Throttle feature is load-dependent for quieter operation and incredible fuel efficiency.• Electric start with recoil backup. • Battery and battery tray kit sold separately.• 120/240 voltage selector switch standard.• Electronic circuit breakers standard.• Folding handle bars conserve space for easy storage.
Deluxe SeriesPortable Generators• EM Series Generators come standard with a variety of convenience features including simultaneous AC/DC use, circuit protection, large fuel tank capacity, electric start capability with auto choke and fuel solenoid for remote starting capability. • Powered by commercial grade Honda OHV engines for quiet, durable and efficient power. • Battery and battery tray kit are sold separately.• Automatic idle with fuel gauge/meter standard.• Voltage selector switch with Auto Voltage Regulator included on all models.• All models are EPA and CARB compliant
Item Number Engine Wattage Max. AC Output
Rated AC
Output
Max. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run
Time Per Tankful*
Size DryWeight
RETAIL PRICE
EM4000SXAT270cc IGX Honda OHV w/Electric Start and Oil Alert™
4,000120/240V4,000W
33.3/16.7A
3,500W29.2/14.6A
12V100W8.3A
71dB 6.2 gal. 10.1 hours41.1” L
27.8” W30.6” H
201 lbs. $2,250
EM5000SXK3AT390cc IGX Honda OHV w/Electric Start and Oil Alert™
5,000120/240V 5,000W
41.2/20.8A
4,500W 37.5/18.6A
12V100W8.3A
72dB 6.2 gal. 8.1 hours41.1” L
27.8” W30.6” H
232 lbs. $2,430
EM6500SXK2AT390cc IGX Honda OHV w/Electric Start and Oil Alert™
6,500120/240V6,500W
54.2/27.1A
5,500W45.8/22.9A
12 V100W8.3A
73dB 6.2 gal. 6.9 hours41.1” L
27.2” W30.6” H
243 lbs. $2,890
* Approximate run time per tankful of fuel, based on rated load.
EM5000SXK3ATEM4000SXAT EM6500SXK2AT
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
NEWNEW NEW
Order Online www.gnedi.com Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
HONDA POWER EQUIPMENT
Sold in MN, ND and SD
HO
NDA P
OW
ER E
QUIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
HO
NDA P
OW
ER EQ
UIP
MEN
T
37
Order Online www.gnedi.com Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
HONDA POWER EQUIPMENT
Sold in MN, ND and SD
RETAIl PRICE
$1,430
Natural Gear™ Camouflage Super Quiet GeneratorRugged, Reliable and Designed for the Great Outdoors• All the same great features your customers have grown to love in the EU2000i, but now with Natural Gear™ camouflage exterior.• Natural Gear™ is photographically derived and blends into any environment.• 2,000 watts (16.7A) of Honda Inverter AC power.• 12V - 8.0A DC output.• Super quiet 53 to 59 dB(A).• Eco-Throttle runs up to 15 hours on 1 gal. of fuel.• Power for microwaves, refrigerators, hair dryers and small AC units.• Advanced inverter technology provides reliable power to computers and other sensitive equipment.• Run parallel with another EU2000i for additional power.• Protected by Oil Alert™.• USDA-qualified spark arrestor/muffler.• 46.3 lbs.• Item number EU2000iANF
The Companion2,000 Watt, 30A Super Quiet Inverter• Designed for RVs with rooftop AC units.• 2,000 watts (16.7A) of Honda inverter 120V AC power.• 12V - 8.0A DC output.• Super quiet - 53 to 59 dB(A).• Eco Throttle runs up to 15 hours on 1 gal. of fuel.• Advanced inverter technology provides reliable power to computers and other sensitive equipment.• Protected by Oil Alert™• Lightweight - less than 46.3 lbs.• Item number EU2000iKN1
RETAIl PRICE
$1,280
Handi™ EU3000i3,000 Watt Super Quiet Inverter Generator• Designed for maximum portability with recessed transport wheels and a unique folding handle. • New, compact design is easier to store, load and pack.• Rear offset handle aids in lifting and loading.• Closeable fuel vent for safer transport.• Recessed convenience light on front panel.• With a dry weight of only 78 lbs, it is the lightest 3,000 watt inverter generator Honda has ever made.
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
ItemNumber Engine Wattage Max.
AC OutputRated
AC OutputMax. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run Time
Per TankfulDimensions Weight RETAIL
PRICE
EU3000iHAN 160cc Honda OHV 3,000
120V 3,000W
25A
2,600W 21.7A
12V100W8.3A
65dB 1.56 gal.
3.6 hrs. at rated load; 7.7 hrs. at 1/4 load
24.5 ”L14.9” W19.3” H
78 lbs. $2,600
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
38
Super Quiet Series Inverters• Honda’s advanced inverter technology makes these generators extremely lightweight, portable and fuel-efficient. • Honda’s Inverter Technology creates “clean” or stable power, making EU Series ideal for use with sensitive electronic equipment. • Since they are totally enclosed, they are incredibly quiet. • All models are EPA and CARB compliant.
EU2000iKN EU3000iSANEU1000iKN
ItemNumber Engine Wattage Max.
AC OutputRated
AC OutputMax. DCOutput
Noise Level
Fuel Tank Cap.
Approx. Run Time
Per TankfulDimensions Weight RETAIL
PRICE
EU1000iKN 50cc Honda OHV 1,000
120V 1,000W
8.3A
900W 7.5A
12V96W8.0A
59dB 0.6 gal.
3.8 hrs. at rated load; 8.3 hrs. at 1/4 load
17.7 ”L9.4” W15.0” H
29 lbs. $950
EU2000iKN 100cc Honda OHV 2,000
120V 2,000W16.7A
1,600W 13.3A
12V 96W8.0A
59dB 1.1 gal.
4.0 hrs. at rated load; 15 hrs. at 1/4 load
20.1” L11.4” W16.7” H
46.3 lbs. $1,150
EU3000iSAN 200cc Honda OHV 3,000
120V3,000W25.0A
2,800W23.3A
12V144W12A
58dB 3.4 gal.
7.2 hrs. at rated load; 20 hrs. at 1/4 load
25.8” L18.9” W22.4” H
134 lbs. $2,330
6500 Watt Super Quiet Inverter GeneratorWith i-Monitor Display• i-Monitor display provides information for hours of operation, wattage and engine speed as well as diagnostics for dealer servicing.• 120/240 volt selector switch standard.• Remote-start capable (requires Remote Start Kit; see Generator Accessories).• Wheelbarrow-style frame/wheel kit with folding handles for easy storage.• 390cc Honda OHV engine with Oil Alert™.• 120/240V, 6,500W, 54.1/27.1A maximum AC output.• 5,500W 45.8/22.9A rated AC output.• Super-quiet 60dB operating noise level.• 4.5 gallon fuel tank capacity.• Runs approximately 4.7 hours per tankful of fuel at rated load.• Runs approximately 14 hours per tankful of fuel at 1/4 load with Eco-Throttle engaged. • Overall dimensions: 33.5”L x 26.4”W x 27.5”H. • 253 lbs.• Item number EU6500isANRETAIl PRICE
$4,500
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
HO
NDA P
OW
ER E
QUIP
MEN
T
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
HO
NDA P
OW
ER EQ
UIP
MEN
T
39
Order Online www.gnedi.com HONDA POWER EQUIPMENT
Sold in MN, ND and SD
Questions? Call the GNE Power Team at 1-800-822-0295.
Parallel Operating Cables
Item Number Item Description Fits Generator Model(s)
RETAIL PRICE
32650-892-010AH DC Charging Cord Enables generator to charge batteries; 10’ long EU1000iA2, EU2000i and EU3000is $12
32650-825-005 DC Charging Cord Enables generator to charge batteries; 6’ long All Other Models with DC Output (end style “C”) $18
DC Charging Cords
Generator Light Kits
Item Number Item Description Fits Generator Model(s)
RETAIL PRICE
† 06710-ZB4-800 2-Wheel Kit Includes wheelbarrow-style handlebars, grips, wheels, axle, legs and all hardware
EB3500/EB5000EM3500/EM5000 $197
06423-ZS9-T30 4-Wheel Kit Includes 4 wheels, 2 axles and all hardware EU3000i $94
06424-ZS9-000AH Swivel 4-Wheel Kit 4-wheel kit with locking front swivel casters and 6” rear wheels EU3000i $93
Generator Wheel Kits
Item Number Item Description Fits Generator Model(s)
RETAIL PRICE
08E93-HPK123HI Parallel Operating CablesLink 2 identical models together for double the AC output; Includes ground wire connection. Output is limited by the capacity of the receptacles. (Not for use w/ Std. EU3000is)
EU1000iA2, EU2000i and EU3000Handi $40
† 08E91-Z07-200AH Parallel Operating Cable Kit Links two EU2000i’s for a maximum 30A from the 30A/125V NEMA L5-30 locking plug receptacle, heavy-duty plastic (Gen Tran) EU2000is $200
† 08E90-HPK2002 Parallel Operating Cable Kit Links two EU2000i’s for a maximum 30A from the 30A/125V NEMA L5-30 locking plug receptacle, wattage meter (Reliance) EU2000is $200
08E90-HPK2001 RV Parrallel Operating Cables - EU2000is
Links two EU2000i’s for a maximum 30A from the 30A/125V NEMA TT; 30R RV - receptacle - RV Ready EU2000is $200
† L530P-RV30R-GT RV Adapter Converts L5-30 locking receptacle to RV ready. Plugs into a 30A/125V NEMA L5-30 locking receptacle (63mm long).
EU1000iA2, EU2000iand EU3000is $18
06321-ZS9-T30AH Parallel Operating Cables Link 2 EU3000is models together for 2X the AC output. Output is limited to the capacity of the receptacles. EU3000is $50
† 08E91-ZT7-6370C Parallel Operating Cables (50A)
Links 2 EU3000is; 50A Breaker protects against overload EU3000is $230
† 08E93-1450HRV RV Parrallel Operating Cables - EU3000Handi
Link two EU3000Handi’s for a max. 50A from the 50A/125V NEMA TT; 50R RV receptacle - RV ready EU3000Handi $130
† 08E91-Z07-100AH RV ParallelOperating Cables
Link two EU2000i’s for a max. 30A from the 30A/125V NEMA TT; 30R RV receptacle - RV ready EU2000i $200
Item Number Item Description Fits Generator Model(s)
RETAIL PRICE
† 08602-ZT3-000AH Halogen Light Kit 500 watt quartz halogen light kit attachment EU1000iA2 $450† 08602-Z07-000AH Halogen Light Kit 500 watt quartz halogen light kit attachment EU2000i $565
08E93-HPK123HI
08602-ZT3-000AH
32650-892-010AH
08E91-Z07-100AH
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
40
Item Number Item Description Fits Generator Model(s) RETAIL PRICE
06610-Z22-800AH Remote Control Kit Start and stop from remote location EM3800/5000K2, EM6500K1, EU6500IS, EM5000/7000iS $200
06550-Z22-A30AH Battery Tray Kit Holds battery securely in place EM3800SX, EM5000SXK2, EM6500SXK1 $81
31670-HPE-000 Battery Tender® Fully automatic battery charger; keeps battery perfectly charged All electric start Honda generators $71
† 08181-ENM-036AH Hour Meter Monitors service/maintenance intervals andhourly usage of unit All current Honda generator models $48
† 06425-ZS9-010AH 2-Wheel Kit with Telescoping Handle
Easy open telescoping stainless steel handles and rubber dampened pre assembled base w/8” industrial-rated rubber wheels.
EU3000iS $200
63230-Z07-010AH Theft Deterrent Bracket
1/8” thick power-coated steel bracket with tamper-proof bolts to deter thieves from cutting the plastic handle and removing a cable lock. Cable and Lock are not included.
EU2000i $35
Generator Covers
Additional Generator Accessories
Item Number Item Description Fits Generator Model(s) RETAIL PRICE
† 08P58-ZT3-100S Silver Generator Cover Custom-fitted; Heavy-duty, thicker material EU1000iA2 $1508P58-Z07-100S Silver Generator Cover Custom-fitted; Heavy-duty, thicker material EU2000i $1808P58-ZS9-100S Silver Generator Cover Custom-fitted; Heavy-duty, thicker material EU3000i $2308P58-Z28-00S Silver Generator Cover Custom-fitted for handi Model; Honda Generator Logo EU3000i Handi $2408361-340008G Silver Generator Cover Custom-fitted, waterproof breathable polyester EX2200, EG3500/5000 $20
08P34-ZC2-000 Silver Generator Cover Custom-fitted, waterproof breathable polyester EP2500, EN2500, EM3500X/SX/K1, EM500X/XK1, EZ3500/5000 $27
08P58-ZT3-100G Camo Generator Cover Custom-fitted; Heavy-duty, thicker material EU1000iA2 $1708P58-Z07-100G Camo Generator Cover Custom-fitted; Heavy-duty, thicker material EU2000i $20
† 08P57-Z07-20G Camo Generator Cover Fits over Parallel Cable Kit when installed on the generator EU2000i $2208P58-ZS9-100G Camo Generator Cover Custom-fitted; Heavy-duty, thicker material EU3000i $25
† 08P58-Z28-00G Camo Generator Cover Custom-fitted for Handi Model EU3000i Handi $26† 08P58-Z30-000 Silver Generator Cover Custom-fitted (with out wheel kit option) EG4000/EG5000/EG6500CL $32
† 08P57-Z25-500 Silver Generator Cover Custom-fitted, Universal folding handle wheel kit modelsEU6500ISA, EM4000SX, EM5000SXK3, EM6500SXK2, EB4000XA, EB5000XK2, EB6500XK1
$32
† 08P58-Z22-600 Silver Generator Cover Custom-fitted, Universal fixed handle wheel kit modelsEG4000/EG5000/EG6500CL, EM3800/5000/6500SXEB3800XA, EB5000XK2A, EB6500XA
$36
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc. Connection of a generator to house power requires a transfer device to avoid possible injury to power company personnel. Consult a qualified electrician. © 2011 American Honda Motor Co., Inc.
ACCESSORY NEWS BULLETINAPPLICATION: GeneratorsACCESSORY: EU3000is 2-Wheel Telescoping Kit, EU2000i Theft Deterrent Bracket
EU3000is 2-Wheel Kit with Telescoping Handle: Convenient to use, lightweight durableconstruction, easy opening telescoping stainless steel handles and rubber dampened pre-assembled base with 8” industrial-rated rubber wheels make this wheel kit a must for EU3000is generators.
Part Number Description D/N S/R 06425-ZS9-010AH 2-WHEEL KIT, EU3000IS (ROUSH MFG.) $149.99 $199.99
EU2000i Theft Deterrent Bracket: Attach a custom made, 1/8" thick powder-coated steel bracket with tamper-proof bolts (using the tamper-proof key provided) to deter thieves from cutting the plastic handle and removing a cable lock. Works with all EU2000i models. Cable and lock are not included.
Part Number Description D/N S/R 63230-Z07-010AH THEFT DETERRENT BRACKET, EU2000I (ROUSH MFG.) $26.24 $34.99
All prices, specifications, and availability are subject to change without notice.
PAB54175
IA10-02 Issue Date Application
May 2010 GeneratorsRouting General Manager Service Manager Technician Sales Manager Parts Manager © 2010 American Honda Motor Co., Inc. All Rights Reserved
Remote Control Kit Battery Tender® 2-Wheel Kit w/Telescoping Handle
ACCESSORY NEWS BULLETINAPPLICATION: GeneratorsACCESSORY: EU3000is 2-Wheel Telescoping Kit, EU2000i Theft Deterrent Bracket
EU3000is 2-Wheel Kit with Telescoping Handle: Convenient to use, lightweight durableconstruction, easy opening telescoping stainless steel handles and rubber dampened pre-assembled base with 8” industrial-rated rubber wheels make this wheel kit a must for EU3000is generators.
Part Number Description D/N S/R 06425-ZS9-010AH 2-WHEEL KIT, EU3000IS (ROUSH MFG.) $149.99 $199.99
EU2000i Theft Deterrent Bracket: Attach a custom made, 1/8" thick powder-coated steel bracket with tamper-proof bolts (using the tamper-proof key provided) to deter thieves from cutting the plastic handle and removing a cable lock. Works with all EU2000i models. Cable and lock are not included.
Part Number Description D/N S/R 63230-Z07-010AH THEFT DETERRENT BRACKET, EU2000I (ROUSH MFG.) $26.24 $34.99
All prices, specifications, and availability are subject to change without notice.
PAB54175
IA10-02 Issue Date Application
May 2010 GeneratorsRouting General Manager Service Manager Technician Sales Manager Parts Manager © 2010 American Honda Motor Co., Inc. All Rights Reserved
ACCESSORY NEWS BULLETINAPPLICATION: GeneratorsACCESSORY: EU3000is 2-Wheel Telescoping Kit, EU2000i Theft Deterrent Bracket
EU3000is 2-Wheel Kit with Telescoping Handle: Convenient to use, lightweight durableconstruction, easy opening telescoping stainless steel handles and rubber dampened pre-assembled base with 8” industrial-rated rubber wheels make this wheel kit a must for EU3000is generators.
Part Number Description D/N S/R 06425-ZS9-010AH 2-WHEEL KIT, EU3000IS (ROUSH MFG.) $149.99 $199.99
EU2000i Theft Deterrent Bracket: Attach a custom made, 1/8" thick powder-coated steel bracket with tamper-proof bolts (using the tamper-proof key provided) to deter thieves from cutting the plastic handle and removing a cable lock. Works with all EU2000i models. Cable and lock are not included.
Part Number Description D/N S/R 63230-Z07-010AH THEFT DETERRENT BRACKET, EU2000I (ROUSH MFG.) $26.24 $34.99
All prices, specifications, and availability are subject to change without notice.
PAB54175
IA10-02 Issue Date Application
May 2010 GeneratorsRouting General Manager Service Manager Technician Sales Manager Parts Manager © 2010 American Honda Motor Co., Inc. All Rights Reserved
Theft Deterrent Bracket
Other covers available
HO
NDA P
OW
ER E
QUIP
MEN
T
Attn: Honda PE DealersCall the Power Team to request your FREE Honda PE Accessory Catalog
Order Online www.gnedi.comHONDA POWER EQUIPMENTSold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
41
Order Online www.gnedi.com HONDA CHEMICAlSSold in MN, ND and SD
Item Number Color Application RETAIL PRICE
08707-R8 Bright Red Engines (Fan Covers, Recoil Starters, Etc.); Generators; Tillers; Snowblowers; HRC-7000 Series Attachments; Most Attachments for Lawn, Utility and Compact Tractors; HA4100 Lawn Tractor $12
08707-R136 Diana Red HT and HTR Series Riding Equipment; RT5000 Tractor $1108707-R165 Jolly Red H2000/3000/4000/5000/6000 Series Riding Equipment $11
08707-NH35M Cloud Silver Metallic
H1000/2000/3000/4000/5000/6000 Series Riding Equipment Mower Decks; Lawnmowers: HR194, HR/HRA214, HRS21 (with Light Silver Mower Deck); HT-R3009K0; HT3813K0; HT3810K0/K1 Mower Decks
$17
† 08707-R280 Power Red Power Equipment (Tillers, Snowblowers, Generators) $13
Touch-Up Paints
Item Number Item Description RETAIL PRICE
08208-HST01 Hydrostatic Fluid2 Pack of Resealable 1 Qt. Bottles; Specifically Designed for Honda Hydrostatic Transmissions; Pour Point Exceeds -50ºC; Provides Maximum Efficiency and Transfer of Power; Note That Some Honda Hydro. Transmissions Do Not Use This Fluid. Refer to Shop Manual for Correct Fluid Specifications.
$12
08732-0001 Fuel Stabilizer (8 oz.)12 Pack of 8 fl. oz. Long Neck Bottles; Genuine STA-BIL® Formula Prevents Gasoline-Related Problems During Periods of Extended Winter Storage; Prevents Rust, Freezing or Gelling of Fuel; Keeps Jets and Float Bowls Free of Gummy Residues; Equipment Stays Ready-to-Use
$5
08207-5W30 Genuine Honda 5W-30 Oil
12 Pack of 1 Qt. Bottles; 5W-30 Formulation; Note: It is Extremely Important to Follow the Specific Oil Recommendations that Appear in the Owner’s Manual $5
08207-10W30 Genuine Honda 10W-30 Oil
12 Pack of 1 Qt. Bottles; 10W-30 Formulation; Note: It is Extremely Important to Follow the Specific Oil Recommendations that Appear in the Owner’s Manual $5
08207-30 Genuine Honda 30W Oil
12 Pack of 1 Qt. Bottles; 30W Formulation; Note: It is Extremely Important to Follow the Specific Oil Recommendations that Appear in the Owner’s Manual $5
Essential Fluids
Liquid GasketsItem Number Item Description RETAIL
PRICE
† 08717-0004 Hondabond 4 6 Pack of Carded 3.5 oz. Tubes; Semi-Drying Liquid Gasket; Seals with a Tough, Elastic Film, Yet Removes Easily; Solvent-Based Formula Resists Gasoline $7
† 08718-0001 Hondabond HT Individual Carded 3.5 oz. Tube; High-Temperature Silicone Liquid Gasket; Non-Acidic, Will Not Corrode Aluminum; For Use In Areas Not Requiring Solid Gaskets $15
Item Number Description Application RETAIL
PRICE
A HONDAKIT1 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions GC135/160/190 and GCV 135/160/190 $25
B HONDAKIT2 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions GX110 and GX120 with standard air filter $25
A HONDAKIT3 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions
GX110 and GX120 with Cyclone air filter and GX140, GX160 & GX200 with standard or Cyclone air filter $25
A HONDAKIT4 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions GX240 and GX270 with standard air filter. $25
A HONDAKIT5 Includes air filter, spark plug, 2-qts. engine oil, STA-BIL® fuel stabilizer and instructions
GX240 & GX270 with Cyclone air filter and GX340 & GX390 with standard or Cyclone air filter $30
C HONDAKIT6Includes prefilter, air filter, 2 spark plugs, 2-qts. engine oil, oil filter, fuel filter, STA-BIL® fuel stabilizer and instructions
GX & GV 610, 620 with standard air filter and serial number starting with 2 and GX & GXV670 with standard air filter and serial number starting with 1.
$70
Honda Engine Maintenance Kits• Kits include air filters, fuel stabilizer, oil and more, all pre-selected by engine type for your convenience.• An excellent retail kit for Honda Engine and Honda Power Equipment customers.
Please read the owner’s manual before operating your Honda Power Equipment. © 2011 American Honda Motor Co., Inc.
A CB
HO
NDA C
HEM
ICAlS
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
42
Up to 30% more powerful than the competition[ ]
High Performance VacsAdvanced Impeller and Housing for Superior Suction• Industry’s best reduction ratio, due to the five bladed, reverse inclined fan.• 29” nozzle width, with on-the-go nozzle height adjustment.• 8 bushel debris collection bag.• 10” front wheels and large, 12” pneumatic rear wheels make HPV vacs easy to maneuver.
Item Number Engine Drive
SystemLiner Kit Included Weight RETAIL
PRICE5611-00-01 206cc Briggs Intek Push Yes 184 lbs. $1,439
High Performance Vac AccessoriesItem Number Description RETAIL
PRICE600020 12’ Intake Hose Kit $269
600035 Nozzle Side Guard Kit $34
† 600177.LIT Debris Bag $116
600050 Felt Liner Kit for Debris Bag $129
† 600040 Swivel Kit for 5601 & 5611 Vacs $199
Suburban High Output (SHO) BlowersHighest Performance Blowers on the Market • Advanced impeller design for maximum air flow.• Patented adjustable air director moves piles of leaves farther & faster. • Air discharge can be directed through the front or the side.• Lift handle makes lifting the blower on and off the truck easier.• Lighter weight design is easier than ever to use.• Ergonomic handles are height adjustable and designed with anti-vibration grip.• 10” front /12” rear pneumatic wheels.• 5 year limited warranty.• Optional swivel wheel kit for 360º turning radius (Item number 9050-00-01).
High Output BlowersHigher Output, Higher Performance, Higher Profits• Patented adjustable air deflector moves debris farther and faster, directing it to the front or to the side.• Computer designed impeller with reversed inclined blades to dramatically increase air output.• 10” pneumatic front tire and 12” pneumatic rear tires for easy maneuvering.• Ergonomic handles with adjustable height and anti-vibration grip.• Heavy-gauge steel blower housing for strength and durability.• Lift handle for convenience in loading and unloading.
Item Number Engine Blower Type Weight RETAIL PRICE
LB901-00-01 265cc Subaru EX Optimax 163 lbs. $1,149LB900-00-01 270cc Honda OHV Optimax 161 lbs. $1,3999131-00-01 390cc Honda OHV High Output 179 lbs. $1,649LB1401-00-01 404cc Subaru EX40 Optimax 195 lbs. $1,599
LB900-00-01
5611-00-01
Item Number Engine Blower Type Weight RETAIL PRICE
9502-00-01 160cc Honda OHC SHO 110 lbs. $799LB601-00-01 170cc Subaru SHO 118 lbs. $769
9502-00-01
Order Online www.gnedi.com Order Online www.gnedi.comlITTlE WONDERSold in MN, ND, N. WI and E. MT
lITTlE WONDERSold in MN, ND, N. WI and E. MT
lITT
lE W
ON
DER
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
lITTlE WO
NDER
43
Order Online www.gnedi.com Order Online www.gnedi.comlITTlE WONDERSold in MN, ND, N. WI and E. MT
lITTlE WONDERSold in MN, ND, N. WI and E. MT
Item Number Engine Intake Hose Intake Nozzle Weight RETAIL PRICE
8141-00-01 14HP Subaru EX 8” x 10’ 8” dia. 225 lbs. $2,599
8160-00-01 16HP Briggs and Stratton Vanguard 10” x 10’ 10” dia. 375 lbs. $3,229
8180-00-01 18HP Briggs and Stratton Vanguard 10” x 10’ 10” dia. 385 lbs. $3,599
8221-00-01 22HP Kohler Command Pro 12” x 10’ 12” dia. 500 lbs. $5,289
8271-00-01 27HP Kohler Command Pro 14” x 10’ 14” dia. 525 lbs. $5,699
Shredding TruckloadersUltimate in Shredding Technology....Rugged Debris Loaders• Collect, condense and transport loads of leaves and other debris with these powerhouse truckloaders.• Five-blade shredding Talon™ ring, combined with an advanced impeller design, offer the highest debris reduction ratio available of any loaders on the market.• The quietest and most efficient truck loaders on the market, due to advanced impeller design.• Little Wonder debris loaders are the right choice for debris and turf care clean-up on any size residential or commercial job.• Best reduction ratio, with exclusive shredding talon ring.• Rugged, heavy-gauge all-steel construction.• Highest flow rate and lowest noise level.• User-friendly nozzle design and hose connection.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
44
8010-00-01Swing Away Kit
720055Stake Body Swing Away Kit16 & 18 HP Truck Loader Accessories
ItemNumber Description RETAIL
PRICE
720020 Liner Kit $83720025 18” Exhaust Extension Kit $89720030 Discharge Hose Extension $199720055 Stake Body Swing Away Kit $7498010-00-01 Swing Away Kit $899
Unit shown with optional trailer
BedShaper®
For Clean, Sharp Edges - Up to 100’ per Minute• Zero-turning radius.• Powerful notched blade creates a clean, sharp edge.• Cutting depths from 1/2” to 4.5”, controlled by a 7-position gauge wheel.• Patent-pending 3-In-1 lever infinitely controls ground speed and direction in both forward and reverse.• Hydrostatic transmission features a tow valve for moving the unit without engine power.• 16.25” dia. heat-treated spring steel blade.
Item Number Engine RETAIL PRICE
902-00-01 381cc Kawasaki $3,299903-00-01 390cc Honda OHV $3,599
BedShaper® AccessoriesItem Number Description RETAIL
PRICE† 80001 Shredder Kit $199
† 80002 Blade Weight Kit $99
† 80004.LIT Golf Quadrant Kit $10 902-00-01
ItemNumber Description RETAIL
PRICE
720026 Discharge Hose Extension $231† 720040 Liner Kit $89† 720050 Trailer w/Adjustable Ball Hitch $879
22 & 27 HP Truck Loader Accessories
14 HP Truck Loader AccessoriesItemNumber Description RETAIL
PRICE
† 720062 Swing Away Mount $729† 720060 Receiver Hitch Mount $109
720061 Tailgate Mount $239† 720027 Discharge Chute Extension Hose $149† 720070 Discharge Chute Deflector $29
720025 18” Housing Extension Kit $89720030 Discharge Chute Extension Hose $199
Order Online www.gnedi.com Order Online www.gnedi.comlITTlE WONDERSold in MN, ND, N. WI and E. MT
lITTlE WONDERSold in MN, ND, N. WI and E. MT
lITT
lE W
ON
DER
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
lITTlE WO
NDER
45
Order Online www.gnedi.com Order Online www.gnedi.comlITTlE WONDERSold in MN, ND, N. WI and E. MT
lITTlE WONDERSold in MN, ND, N. WI and E. MT
Item Number
Blade Type
Blade Length Weight RETAIL
PRICE
1910-00-01 Single Edge 19” 7.6 lbs. $2691920-00-01 Double Edge 19” 8.5 lbs. $2892410-00-01 Single Edge 24” 7.9 lbs. $2892420-00-01 Double Edge 24” 8.8 lbs. $3093010-00-01 Single Edge 30” 8.4 lbs. $3093020-00-01 Double Edge 30” 10.1 lbs. $329
Electric Hedge TrimmersRugged, Dependable Performance• Featuring dual-reciprocating, scissor-cutting action blades.• 2,700 cuts per minute blade speed.• 110V electric motor.• Cutting capacity up to 1/2” diameter.• Double activated switches allow the unit to operate only when both switches are simultaneously depressed, increasing operator safety.• Lightweight, precision-balanced design with ergonomic handle.• Cord management system helps attach the extension cord to the unit and keeps it from unplugging during operation.
1920-00-01
Gasoline-Powered Hedge Trimmer30” Single Edge Blade• 21.2cc, 2-cycle commercial-grade engine.• Single edge, 30” blade has reciprocating, scissor action for faster and cleaner trimming.• 3,500 cuts per minute blade speed.• Cutting capacity up to 1” diameter.• Superior blade design with stamped, thru-hardened steel blades that maintain a sharp edge longer, for less downtime and maintenance.• Anti-vibration shock mounts in handle for user comfort.• Built-in centrifugal clutch, finger throttle control and lock out lever for operator safety.• Item number 2230S-00-01RETAIl PRICE
$349 Lawn EdgersRugged and Easy to Operate• Cut up to 90’ per minute.• 10” steel blade is sharpened and useable on all four sides.• Easy cutting adjustments for edging depth up to 4”.• Cast iron cutter head offers durability and easy maintenance.• Shielded, 2-belt drive for extra blade power (Pro models only).• Deluxe model features a rotating cutter head where the cutting blade can be adjusted up to 120º horizontally for edging and trimming around posts, walls & trees.
Item Number Engine Drive Belt
Rotating Cutter Head Weight RETAIL
PRICE6002-00-01 (Deluxe) 148cc Briggs Single Yes 60 lbs. $599
6033-00-01 (Pro) 158cc Briggs Dual No 65 lbs. $6296232-00-01 (Pro) 120cc Honda OHV Dual No 69 lbs. $869
Item Number Description RETAIL PRICE
6020-00-01 Crack Cleaner Attachment; Heavy-Duty Twisted Wire Brushes $89
129.LIT Edger Blades; 2-Pack $6
Lawn Edger Accessories
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
46
Item Number Engine Cutting Width Weight RETAIL PRICE
† SCHV-12/5.5 160cc Honda OHV 12” 293 lbs. $4,476† SCHV-18/5.5 160cc Honda OHV 18” 303 lbs. $4,613† SCHV-18/8 240cc Honda OHV 18” 343 lbs. $5,103† SCHV-20/8 240cc Honda OHV 20” 343 lbs. $5,153† SCHV-24/8 240cc Honda OHV 24” 343 lbs. $5,168
Sod Cutter Accessories
Item Number Description Fits Sod Cutter Model(s) RETAIL PRICE
† C400069.CLA Sod Cutter Trailer Bracket w/Fastener All Classen Models $40
C900014.CLA 12” Sod Cutter Blade Conversion Kit SC-18, SC-20, SC-24 $129
† C900029.CLA 18” Sod Cutter Blade Conversion Kit SC-12/5.5 (S/N 279 & Up) and SC-12/8.0 (S/N 108 & Up) $252
C100016.CLA 18” Sod Cutter Blade Conversion Kit SC-20, SC-24 $55
† C900007.CLA 20” Sod Cutter Blade Conversion Kit SC-18, SC-24 $101
† C900019.CLA 24” Sod Cutter Blade Conversion Kit SC-18, SC-20 $101
C100029.CLA 12” Cutting Blade SC-12 $54
† C100416.CLA 16” Cutting Blade SC-16 $56
C100016.CLA 18” Cutting Blade SC-18 $55
† C100110.CLA 20” Cutting Blade SC-20 $62
† C100329.CLA 24” Cutting Blade SC-24 $76
SCHV18/8
Gear Drive Sod Cutters12”, 18”, 20” and 24” Widths • All the same great features as hydrostatic sod cutters (above), with exception of gear drive transmission.• Gear drive features finger throttle for adjustable speed control and goes to idle, stopping machine movement when released.
Item Number Engine Cutting Width Weight RETAIL PRICE
† SC-12/5.5 160cc Honda OHV 12” 290 lbs. $3,895† SC-12/8 240cc Honda OHV 12” 330 lbs. $4,390
SC-18/5.5 160cc Honda OHV 18” 300 lbs. $4,032SC-18/8 240cc Honda OHV 18” 340 lbs. $4,523
† SC-20/5.5 160cc Honda OHV 20” 300 lbs. $4,071† SC-20/8 240cc Honda OHV 20” 340 lbs. $4,575
SC-24/8 240cc Honda OHV 24” 340 lbs. $4,585
SC-18/8
Hydrostatic Drive Sod Cutters12”, 18”, 20” and 24” Widths • Adjustable cutting depth up to 2.5” deep.• Unique design lets you switch back and forth from a 12”, 18”, 20” or 24” cut in a matter of minutes with optional blade conversion assemblies.• Hydrostatic drive delivers a smooth, consistent power flow with infinitely varied transport speeds of up to 4.7 mph. The power-reverse feature makes it easier to load and unload, and easier to maneuver.• Clutch/brake lever for ease in unloading machine backwards from a truck or trailer.• Powered by Honda OHV engines.
New & Improved Model - 40% Less Vibration!
Order Online www.gnedi.com Order Online www.gnedi.comClASSENSold in MN, ND, N. WI and E. MT
ClASSENSold in MN, ND, N. WI and E. MT
Item Number Hitch Type Aerating
Width# of Tines
Lift Type
Load Capacity Weight RETAIL
PRICE
48RT Tow/3 Point Hitch 42” 48 Manual 780 lbs. 320 lbs. $2,039
48RTE Tow/3 Point Hitch 42” 48 Electric 780 lbs. 320 lbs. $2,493
60RT Tow/3 Point Hitch 52” 60 Manual 780 lbs. 365 lbs. $2,153
† 72RT Tow/3 Point Hitch 62” 72 Manual 780 lbs. 425 lbs. $2,266
† 48R 3 Point (Class I & II) 42” 48 Manual N/A 225 lbs. $1,473
ClA
SSEN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
ClA
SSEN
47
Order Online www.gnedi.com Order Online www.gnedi.comClASSENSold in MN, ND, N. WI and E. MT
ClASSENSold in MN, ND, N. WI and E. MT
Core Aerators42” to 72” Aerating Widths• Built of 1.5” x 1.5” solid square (not square tubing) with weight tray for optional added weight.• Tine shafts operate independently for greater turning ease.• 3/4” O.D. tine for aerating depth up to 4”.• 5.25” x 7” hole pattern.• 15 HP minimum tractor required.
Item Number Hitch Type Aerating
Width# of Tines
Lift Type
Load Capacity Weight RETAIL
PRICE
48RT Tow/3 Point Hitch 42” 48 Manual 780 lbs. 320 lbs. $2,039
48RTE Tow/3 Point Hitch 42” 48 Electric 780 lbs. 320 lbs. $2,493
60RT Tow/3 Point Hitch 52” 60 Manual 780 lbs. 365 lbs. $2,153
† 72RT Tow/3 Point Hitch 62” 72 Manual 780 lbs. 425 lbs. $2,266
† 48R 3 Point (Class I & II) 42” 48 Manual N/A 225 lbs. $1,473
Item Number Engine Blades Weight RETAIL
PRICE
TRC-20H 160cc Honda OHV Flail 165 lbs. $1,800† TRC-20B 206cc Briggs & Stratton Flail 165 lbs. $1,472
Grass-Catcher Turf RakesInclude 8 cu. ft. Grass Bag• 20” raking width.• 28 heat-treated flail blades with spacing of 11/16” standard, adjustable up to 1-3/8”.• 5-position, single action height adjustment.• Folding handle for easy transportation.• 8 cu. ft. synthetic catcher bags allows you to immediately pick up a 20” row of thatch for an instant neat and clean appearance.• Detachable steel platform helps carry the weight of the grass catcher bag.• Can be converted to a a turf seeder or a vertical cutter in minutes.
Turf RakesVersatile and Compact• 20” raking width.• 28 heat-treated flail blades with spacing of 11/16” standard, adjustable up to 1-3/8”.• 5-position, single action height adjustment.• Folding handle for easy transportation.• Can be converted to a rake with grass catcher, a turf seeder, or a vertical cutter in minutes.• Self-propelled models feature forward and reverse, eliminating operator fatigue.
Item Number Engine Drive
Type Blades Weight RETAIL PRICE
TR-20H 160cc Honda OHV Push Flail 135 lbs. $1,500TR-20B 206cc Briggs & Stratton Push Flail 135 lbs. $1,199
† TR-20MH 160cc Honda OHV Push Multi-Purpose 135 lbs. $1,550† TR-20MB 206cc Briggs & Stratton Push Multi-Purpose 135 lbs. $1,246† TRS-20B 206cc Briggs & Stratton Self Propelled Flail 215 lbs. $2,800
TRS-20H 160cc Honda OHV Self Propelled Flail 215 lbs. $3,100
Stand-Aer® Ride-On Aerator• 390cc Honda OHV engine.• Stand-Aer® technology allows the operator to steer, turn and aerate non-stop without raising the tines.• Hydrostatic forward and reverse drive with zero-turn radius steering (not-aerating).• 36 tines with a hole pattern of 4.06” x 7”.• 50,407 sq. ft./hr. productivity rate.• Adjustable coring depth up to 3”.• Hydraulic tine deployment allows operator to hydraulically raise and lower tines.• Maximum transport/aerating speed of 414 ft./min. or 4.7 mph.• Dry weight: 880 lbs.• Item number SA-25H
TR-20H
TRC-20H
Model 48R
RETAIl PRICE
$8,726
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
48
Item Number Engine Aerating
Width Coverage # of Tines Weight Bars Weight RETAIL PRICE
CA-18H 120cc Honda OHV 17.5” 23,000 sq. ft./hr. 24 2 Removable Bars; 36 lbs. ea. 278 lbs. $2,700
CA-18B 148cc Briggs & Stratton 17.5” 23,000 sq. ft./hr. 24 2 Removable Bars; 36 lbs. ea. 278 lbs. $2,400
Item Number Engine Aerating Width Coverage # of Tines Drum Weight Bar Weight RETAIL
PRICE
TA-17D 120cc Honda OHV 16.25” 19,333 sq. ft./hr. 24 6.6 gal. 40 lbs.; Removable 323 lbs. $3,350
TA-25D 120cc Honda OHV 24.37” 29,000 sq. ft./hr. 36 9.5 gal. 50 lbs.; Removable 370 lbs. $3,530
Turf Aerators19” and 26.5” Widths • Adjustable coring depth up to 2.75”• Hole pattern: 4.06” x 7”• Full-time self-propelled drive with easy reach controls.• Combination throttle and belt tightener for smoother starting.• Protective chain guard helps keep grass, leaves and cores out of the chain and sprockets.• Side bumpers prevent catching on obstacles.• Tire scrapes (TA-19B and TA-19D only) ensure consistent tine depth.• Heavy duty non-relube ball bearings.• Front mounted poly drum.
Item Number Engine Aerating
Width Coverage # of Tines Drum Weight Bar Weight RETAIL
PRICE
TA-19B 206cc Briggs Intek Pro 19” 24,000 sq. ft./hr. 30 6.6 gal. 40 lbs.; Removable 290 lbs. $2,450
† TA-19D 120cc Honda OHV 19” 24,000 sq. ft./hr. 30 6.6 gal. 40 lbs.; Removable 290 lbs. $2,800
† TA-26D 120cc Honda OHV 26.5” 34,000 sq. ft./hr. 42 9.5 gal. 50 lbs.; Removable 330 lbs. $3,200
Split Drive Aerators17” and 26.5” Widths • Patented split drive technology permits operator to steer, turn, and aerate nonstop without raising the tines out of the ground.• Steering controls ensure straight line operation on side hills with full-time self-propelled drive.• Adjustable coring depth up to 2.75”.• Hole pattern: 4.06” x 7”.• Combination throttle and belt tightener for smoother starting.• Protective chain guard helps keep grass, leaves and cores out of the chain and sprockets.• Side bumpers prevent catching on obstacles.• Heavy-duty non-relube ball bearings.• Front mounted poly drum.
Compact AeratorsSpecially Designed for the Rental Industry • Easy to transport, with folding handles and four lift handles or tie down handles.• Full-time self propelled with easy reach controls.• Adjustable coring depth up to 3”.• Hole pattern: 4.4” x 7”.• Heavy-duty non-relube ball bearings.
TA-25D
TA-19D
Order Online www.gnedi.com Order Online www.gnedi.comClASSENSold in MN, ND, N. WI and E. MT
ClASSENSold in MN, ND, N. WI and E. MT
ClA
SSEN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
ClA
SSEN
49
Order Online www.gnedi.com Order Online www.gnedi.comClASSENSold in MN, ND, N. WI and E. MT
ClASSENSold in MN, ND, N. WI and E. MT
Turf SeedersFor Seeding New and Existing Lawns• 20” seeding width.• Covered, 60 lbs. capacity seed box won’t rust or dent, and is mounted higher to prevent clogging.• Front seed drop ensures follow up soil coverage over seed for better germination.• 26 heat-treated multipurpose blades are uniquely designed with cutting edge on both ends of each blade for double the life.• 1-1/2” spacing between blades.• 5-position, single action height adjustment.• Folding handle for easy transportation.• Can be converted to a standard rake, a rake with catcher bag or a vertical cutter in minutes.
Item Number Engine Weight RETAIL PRICE
TS-20H 160cc Honda OHV 150 lbs. $1,850
TS-20B 206cc Briggs & Stratton 150 lbs. $1,550
SAT and AST TrailersSpecially Designed for Classen Equipment• Lighted trailers let you safely transport your Classen equipment by day or night.• 1 containment rod holds unit securely to your trailer, eliminating tie downs.• Unique 1-2-3 design lets you lower the trailer bed flush to the ground surface so equipment can be easily rolled on or off.• Ideal for rental applications.• Model AST is specially designed to haul Classen aerators and sod cutters.• Model SAT is specially designed to haul Classen seeders, aerators and sod cutters.
Item Number Overall Dimensions
Inside Bed
Width
Inside Bed
Length
Max. Load
CapacityTires Hitch Weight RETAIL
PRICE
AST 21.5”H x 62.5”W x 92.5”L 41.5” 60” 500 lbs. 4.8” x 8” 2” Standard (1-7/8” size available) 361 lbs. $1,926
† SAT 21.5”H x 54”W x 92.5”L 33” 60” 500 lbs. 4.8” x 8” 2” Standard (1-7/8” size available) 370 lbs. $1,812
TS-20H
TSS-20H
SAT
Self-Propelled Turf SeedersInfinite Speed up to 3.4 mph• Self-propelled forward and reverse.• Constant self-propelled speed ensures more consistent seed placement.• 20” seeding width.• Covered, 60 lbs. capacity seed box won’t rust or dent, and is mounted higher to prevent clogging.• Front seed drop ensures follow up soil coverage over seed for better germination.• 26 heat-treated multipurpose blades are uniquely designed with a cutting edge on both ends of each blade for double the life.• 1-1/2” spacing between blades.• 5-position, single action height adjustment.• Folding handle for easy transportation.
Item Number Engine Weight RETAIL PRICE
TSS-20H 160cc Honda OHV 237 lbs. $3,200
TSS-20B 206cc Briggs & Stratton 237 lbs. $2,900
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
50
FastCat® Pro SeriesCommercial Quality for the Homeowner Riding Mower• Designed for the professional who demands a tough mower. If you need commercial durability, functionality and performance the FastCat Pro is for you. • Deluxe high-back flex suspension seat for a smooth, low vibration ride.• Tackle the toughest jobs with ease with decks from 36” to 61” and up to 10 mph top speed for maximum productivity.• Extreme Discharge System for superior clipping dispersal.• Quick lift foot pedal to raise & lower deck on the go.• Light weight design and strategic weight distribution to reduce turf marking and tire slippage.• Maintenance free cutter spindles and caster wheel bearings mean less down time.
Item Number Engine Deck
Size Pumps Weight RETAIL PRICE
† 942297G 541cc Kawasaki KAI V-Twin 36” 10cc 725 lbs. $6,276
942302G 603cc Kawasaki FX 42” 10cc 766 lbs. $6,485
942298G 603cc Kawasaki FX 48” 10cc 785 lbs $6,537
942299G 641cc Kawasaki FX 52” 10cc 825 lbs $6,851
942404G 627cc Briggs & Stratton Vanguard 61” 12cc 1152 lbs $7,845
942405G 726cc Kawasaki FX 61” 12cc 1152 lbs $8,159
Item Number Description RETAIL PRICE
† 970357 Fold-Down ROPS; Easy-Install; OSHA Compliant $480† 970338 BOSS-VAC™ 2-Bag Collection System for 36” Deck $1,990† 970339 BOSS-VAC™ 2-Bag Collection System for 42” Deck $1,990
970340 BOSS-VAC™ 2-Bag Collection System for 48” Deck $1,990† 970341 BOSS-VAC™ 2-Bag Collection System for 52” Deck $1,990
970319 Polyester Grass Catcher Kit; 3.75 Bushel Dump $370† 970316 Polyester Grass Catcher Kit; 5 Bushel Dump $463
970269 52” Mulch Kit w/Eliminator Blades $211970226 48” Mulch Kit w/Eliminator Blades $226970225 36” Mulch Baffle Kit w/Eliminator Blades $156970342 32” & 48” ECO Plate Kit $46970343 36”, 52” & 54” ECO Plate Kit $46
† 970344 42” & 61” ECO Plate Kit $46† 970345 42” Anti-Scalp Kit $70† 970378 48” Anti-Scalp Kit $70
FastCat® Accessories
FastCat RZ® SeriesCommercial Quality for the Homeowner• 3 models give homeowners all the power and performance of a commercial zero-turn mower at an affordable price.• 3 models available with 42”, 52” or 61” cutting decks.• Briggs & Stratton ELS V-Twin engines.• Heavy-gauge deck and frame for extreme durability.• Molded rubber discharge chute that bounces back from hard knocks.• Extreme Discharge System for superior clipping dispersal.• Maintenance-free cutter spindles.• Quick Lift foot pedal to raise and lower deck on the go with ease.• High back bucket seat with arm rests.• Optional collection system available.• 3 year residential warranty; 90 day commercial warranty.
Item Number Engine Deck
Size Weight RETAIL PRICE
942311G 721cc Briggs & Stratton ELS V-Twin 42” 705 lbs. $5,544
942313G 721cc Briggs & Stratton ELS V-Twin 52” 840 lbs. $5,857
† 942314G 726cc Briggs & Stratton ELS V-Twin 61” 900 lbs. $7,008
Order Online www.gnedi.com Order Online www.gnedi.comBOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
BOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
BO
B-C
AT
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
BO
B-C
AT
51
Order Online www.gnedi.com Order Online www.gnedi.comBOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
BOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
Item Number Engine Pumps Deck
Size Weight RETAIL PRICE
942250F 641cc Kawasaki FX 12cc 52” 1,405 lbs. $9,972942259F 852cc Kawasaki FX 12cc 52” 1,405 lbs. $10,766942252F 675cc Kawasaki FX 12cc 61” 1,410 lbs. $10,652942253F 675cc Kawasaki FD LC 12cc 61” 1,432 lbs. $11,106942237F 725cc Kohler Command Pro 12cc 61” 1,412 lbs. $10,879942254F 852cc Kawasaki FX 12cc 61” 1,412 lbs. $10,999
Predator Pro®
Commercial Zero-Turn Mowers• ISO-Ride™ comfort system provides unmatched support plus total isolation from shock and vibration for a better ride.• Fast 16cc Hydro-Gear® pumps generate ground speeds up to 13.5 mph.• Up to 7 adjustable anti-scalp front and rear rollers ensure a better cut.• Elastomeric fabric seat suspension to isolate vibration and absorbs shock for a better all-day ride.• Easy access to deck, belt drive, hydraulic reservoir and oil filter.• Ergonomically designed, easy-access operator controls reduce fatigue.
Item Number Engine Pumps Deck Size Deck
Discharge Weight RETAIL PRICE
942253F 675cc Kawasaki Liquid Cooled 16cc 61” Side 1,432 lbs. $11,106
† 942509G 992cc Generac LP* (LP units require 4164133) 16cc 61” Rear 1,293 lbs. $13,372
† 942510G 992cc Generac LP* (LP units require 4164133) 16cc 61” Side 1,293 lbs. $13,372
† 942511G 992cc Generac LP* (LP units require 4164133) 16cc 72” Side 1,293 lbs. $14,279
† 942512G 992cc Generac Industrial OHVI 16cc 61” Side 1,293 lbs. $12,012
† 942513G 992cc Generac Industrial OHVI 16cc 72” Side 1,404 lbs. $12,466
† 942514G 999cc Kawasaki FX921V 16cc 61” Side 1293 lbs. $11,899
† 942515G 999cc Kawasaki FX1000V-DFI 16cc 61” Side 1,293 lbs. $12,466
† 942516G 999cc Kawasaki FX1000V-DFI 16cc 72” Side 1,404 lbs. $13,372
ProCat® SeriesZero-Turn Riding Mowers• Enhanced discharge design with DuraDeck™ for wider, smooth, more even dispersal of clippings• 12cc Hydrop-Gear™ pumps generate ground speeds up to 11.5 mph.• Adjustable cutting height from 1” to 5.5”. • ISO-Ride™ comfort system provides unmatched support plus total isolation from shock and vibration for a better ride.• Redesigned frame for better visibility, a seat platform that’s 2” lower for enhanced center of gravity.
Item Number Engine Pumps Deck
Size Weight RETAIL PRICE
942500G 726cc Kawasaki FX651V 12cc 52” 1256 lbs. $10,312
† 942501G 726cc Kawasaki FX731V 12cc 52” 1256 lbs. $10,822
† 942506G 852cc Kawasaki FX801V 12cc 52” 1256 lbs. $11,219
942502G 726cc Kawasaki FX730V 12cc 61” 1293 lbs. $11,049
† 942503G 675cc Kawasaki FD731F 12cc 61” 1293 lbs. $11,672
942504G 852cc Kawasaki FX801V 12cc 61” 1293 lbs. $11,332
942507G 852cc Kawasaki FX801V 12cc 61” 1293 lbs. $11,332
† 942505G 725cc Kohler Command Pro 12cc 61” 1293 lbs. $11,106
† 942508G 852cc Kawasaki FX801V 12cc 72” 1404 lbs. $12,239
Limited Availability
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
[ ]NEW AND IMPROVED: Discharge Design
Ride Comfort Maintenance Much More!
[ ]NEW AND IMPROVED: Less Slip, More Grip on Hills
Lower Seat PlatformNew Control Levers
52
Item Number Description RETAIL PRICE
SC103 Single Wheel Sulky $250SD104 Dual Wheel Sulky $275 SD-104SC-103
SulkiesFor Walk-Behind Mowers• Universal attachments fit all walk behind mowers.• Heavy-duty commercial design fits all walk behind mowers.• Durable, galvanized steel finish won’t rust or scratch.
Predator Pro and ProCat AccessoriesItem Number Description RETAIL
PRICE
970354 Fold-Down ROPS $453
970273 61” Deck Striping Kit $99
970274 52”/54” Deck Striping Kit $89
970275 48” Deck Striping Kit $79
970226 48” Mulch Baffle Kit $226
† 970254 61” Widetrack Kit (Widens Track on 61” Units) $85
970269 Mulch Kit for 52” and 54” Decks (Serial Numbers 3000 and Above) $211
970270 Mulch Kit for 61” Deck (Serial Number 3000 and Above) $223
970298 Suspension Seat Kit for ZT200 $452
† 970309 Electric Deck Lift Kit for ZT200 $653
† 970312 Kit - Front Adjust Lift Shaft for Electric Lift Kit ZT200 $114
970315 ZT Hitch Kit $12
970323 52” BOB-CAT Logo 3 Bag Spindle Drive Collection System $2,379
970325 61” BOB-CAT Logo 3 Bag Spindle Drive Collection System $2,379
970324 52” No Logo 3 Bag Spindle Drive Collection System $2,379
† 970326 61” No Logo 3 Bag Spindle Drive Collection System $2,379
† 970329 E.S. Catcher Mounting Kit (Needed for Mower Models 942212A , 942218A, 942219A and 942214A) $17
970342 ECO Plate for 32” and 48” Decks $46
970343 ECO Plate for 36”, 52” and 54” F Series and Prior Decks $46
† 970392 ECO Plate for all 42” and 61” F Series and Prior Decks $46
† 970404 ECO Plate for all 52” New G Series Decks $46
† 970405 ECO Plate for all 61” New G Series Decks $46
† 970406 ECO Plate for all 72” New G Series Decks $47
† 970355 Dump From Seat Catcher Accessory $907
Order Online www.gnedi.com Order Online www.gnedi.comBOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
BOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
BO
B-C
AT
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
BO
B-C
AT
53
Order Online www.gnedi.com Order Online www.gnedi.comBOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
BOB-CATSold in MN, ND, SD, N. WI, E. MT and N. MI
Item Number Engine Deck
Size Drive Type Weight RETAIL PRICE
† 932007G 541cc Kawasaki KAI Recoil Start 32” Single Belt 555 lbs. $3,739
933007G 541cc Kawasaki KAI Recoil Start 36” Double Belt 569 lbs. $3,857
934007G 541cc Kawasaki KAI Recoil Start 48” Double Belt 606 lbs. $3,966
Item Number Engine Deck Size Drive Type Handle Style Weight RETAIL
PRICE
† 933305G 585cc (16HP) Kawasaki FS 36” Hydrostatic Pistol Grip 652 lbs. $5,666
† 933307G 585cc (18HP) Kawasaki FS Electric Start 36” Hydrostatic Pistol Grip 657 lbs. $6,006
† 934306G 585cc (18HP) Kawasaki FS 48” Hydrostatic Pistol Grip 659 lbs. $5,892
† 934307G 585cc (18HP) Kawasaki FS Electric Start 48” Hydrostatic Pistol Grip 659 lbs. $6,119
† 935308G 585cc (20HP) Kawasaki FS 54” Hydrostatic Pistol Grip 720 lbs. $6,402
† 935309G 585cc (20HP) Kawasaki FS Electric Start 54” Hydrostatic Pistol Grip 750 lbs. $6,629
933331G 585cc (16HP) Kawasaki FS 36” Hydrostatic Z-Control 652 lbs. $5,892
934332G 585cc (18HP) Kawasaki FS 48” Hydrostatic Z-Control 659 lbs. $6,119
† 935333G 585cc (20HP) Kawasaki FS 54” Hydrostatic Z-Control 659 lbs. $6,459
Hydrostatic Drive Walk Behind MowersComplete Units• Zero-turning maneuverability.• Operator-friendly fingertip controls require minimal pressure to hold.• 7-Gauge formed, welded and reinforced construction on 36” and 48” deck models. Double 10-Gauge steel top on 54” models.• 10cc pumps generate ground speeds up to 6 mph.• Maintenance-free heavy duty spindles and wheel bearings mean less down time.• Extreme Discharge System with DuraDeck™ with molded rubber discharge chute for superior clipping dispersal.
Z-Control (available on three models) provides smooth, ergonomically-enhanced
operator control.
Gear-Drive Walk-Behind MowersA Winning Combination of Performance and Value• 5 forward speeds with reverse assist.• Extreme Discharge System with DuraDeck™ with molded rubber discharge chute for superior clipping dispersal.• Maintenance-free heavy-duty spindles and wheel bearings.• Flat-free caster wheels maximize uptime.• Heavy-duty 7-gauge frame and unitized cutting decks for longer life of the mower.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
54
Ren-O-Thin® Power RakesThe Most Versatile in Their Class• 18” raking width.• Perfect for breaking up cores as well as dethatching. • Pivoting front axle and the ability to reverse for easy maneuvering.• Simple-to-operate height adjustment.• 4L-section V-belt drive with spring-loaded reel clutch.• Rakes sold without reel. Choose from four interchangeable reels (below) to suit your specific needs.
Mataway® Overseeder/DethatcherHigh-Productivity Overseeder Dethatches and Overseeds in One Pass. • Dethatch, overseed or do both at one time. • 476cc Kohler Magnum engine.• 19” seeding/slicing width.• Adjustable cutting depth for any desired depth up to 1.5”.• Spring-loaded belt tightener clutch.• Comes standard with fixed blades with 2” spacing. • Accepts all additional interchangeable Mataway® blades listed above.• Heavy-duty snap-out reels let you easily select the type of blade and spacing required, while the optional overseeder can be adjusted to provide the proper flow. • To ensure proper germination, raising the reel automatically stops seed flow.• 462 lbs.• Item number †544873C
Item Number Engine Reel Needed Weight RETAIL PRICE
544865C 275cc Briggs & Stratton Yes 135 lbs. $1,110† 544877 160cc Honda OHV Yes 135 lbs. $1,333
Item Number Description RETAIL
PRICE
† 547452A 1/16” blades, 1-1/2” spacing; includes bearings & shaft $271
547453A 1/32” blades, 3/4” spacing; includes bearings & shaft $305545440A 1/8” blades, 2” spacing; includes bearings & shaft $282544440A 1/8” flail blades, 1” spacing; includes bearings & shaft $396
Ren-O-Thin® Reels
Item Number Description RETAIL PRICE
† 544265A 1/16” blades; 1-1/2” spacing $299544262A 1/16” blades; 1” spacing $299
† 544261A 1/32” blades; 1” spacing $299† 544260A 1/32” blades; 1/2” spacing $349† 544269A 1/8” flail blades; 1” spacing $509
Mataway® Vertical Slicer/DethatcherInterchangeable Blades for Versatility and Value• 476cc Kohler Magnum OHV engine.• 19” slicing width.• Adjustable slicing/dethatching depth to 1.5” deep.• Removes dead layers of grass, roots and debris matted between the soil and the growing grass.• Helps keep grass greener and healthier while minimizing the chance of disease.• Unit sold without blades. Choose from five interchangeable reels (below) to suit your specific needs.• 304 lbs.• Item number †544283C
544877
Mataway® Blades Required addition to complete above
Required addition to complete above
RETAIl PRICE
$6,686
RETAIl PRICE
$4,725
Order Online www.gnedi.com Order Online www.gnedi.comRYANSold in MN, ND, SD, N. WI, E. MT and N. MI
RYANSold in MN, ND, SD, N. WI, E. MT and N. MI
RYAN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
RYAN
55
Order Online www.gnedi.com Order Online www.gnedi.comRYANSold in MN, ND, SD, N. WI, E. MT and N. MI
RYANSold in MN, ND, SD, N. WI, E. MT and N. MI
Lawnaire® IV Plus 19” High-Speed, Coring, Roll-Type Aerators• 19” aerating width.• Aerates up to 9 holes per sq. ft. with a aeration pattern of 3.75” x 7”.• Water-filled drum gives deeper tine penetration to 2.75”.• Fold-down handle and lift grabs make it easy to transport. • Ergonomic handle bar features rubber grips and handle-mount throttle.• Easy-attach dual weights give excellent results in harder soils.• 200 lbs. dry/220 lbs. with weights and water in drum.
Lawnaire® V Plus26.5” Coring, Roll-Type Aerators • 26.5” aerating width.• Ground speed of 305’ per min. allows it to aerate up to 40,000 sq. ft./hr.• Aerates up to 9 holes per sq. ft. with a aeration pattern of 3.75” x 7”.• Water-filled drum gives deeper tine penetration to 2.75”.• Low center of gravity makes the Lawnaire® V Plus excellent for use on side hills.• Fold-down handle and lift grabs make it easy to transport. • Ergonomic handle bar features rubber grips and handle-mount throttle.• Easy-attach dual weights give excellent results in harder soils.• 266 lbs. dry/330 lbs. with weights and water in drum.
Lawnaire® 28 28” Zero-Turn Radius Aerator• 200cc Honda OHV engine.• Aeration pattern of 3.5” x 5” cores up to 12 holes per sq. ft.• Vertical coring action produces clean, professional results while covering up to 24,000 sq. ft./hr.• Revolutionary design combines the technology and precision of golf course aeration with the demands of lawn care maintenance.• Updated hood styling made of 16 gauge steel.• Self propelled rear-wheel drive with zero-turning radius and a tricycle front wheel for total maneuverability.• Isolated handle bars and spring-assisted lift for ease of use.• Easy access engine kill switch.• 400 lbs.• Item number 544887.
Item Number Engine Aerating
WidthDry
WeightRETAIL PRICE
544909B 205cc Briggs & Stratton 19” 200 lbs. $2,492
544908A 120cc Honda OHV w/Oil Alert™ 19” 200 lbs. $2,832
Lawnaire® IV Plus AccessoriesItem Number Description RETAIL
PRICE
544856A Tote Trailer for Jr. Sod Cutters and Lawnaire IV and V Aerators $1,530
522361 Aerator Replacement Tine (30 Required for a Complete Set) $5
Item Number Engine Aerating
WidthDry
WeightRETAIL PRICE
† 544911B 205cc Briggs & Stratton I/C 26.5” 228 lbs. $2,832
544910A 120cc Honda OHV w/Oil Alert™ 26.5” 228 lbs. $3,172
Item Number Description RETAIL
PRICE
544856A Tote Trailer for Jr. Sod Cutters and Lawnaire IV and V Aerators $1,530† 549316 Mounting Kit for Lawnaire V Aerators; for Use with Tote Trailer $372
522361 Aerator Replacement Tine (42 Required for a Complete Set) $5
Lawnaire® V Plus Accessories
544908A
544911B
544856A
RETAIl PRICE
$6,557
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
56
Lawnaire® 36” Tow-Behind Aerator• 36” aerating width.• Coring tines standard. Optional slicing tines or open-spoon tines to match your needs. • Up to 4” coring depth; aerates up to 9 holes per sq. ft.• Productivity rate of 1.5 acres/hr. at a max towing speed of 10 mph.• Manual lift standard. Optional hydraulic lift available (which requires 700 psi for operation), or the optional electric lift, which keeps you on your mower when going over driveways, sidewalks or curbs.• Clevis and pin type hitch. • Optional zero-turn hitch kit also available.• 500 lbs.• Item number 544860A
Lawnaire® 3-Point Hitch Aerators• The perfect solution to aerating compacted soil on medium-sized grounds.• Up to 4” coring depth.• Comes standard with one set of 0.75” dia. coring tines; 48 tines (8 tines per wheel) in all.• Optional slicing or open-spoon tines, as well as optional 0.5” coring tines are available.• Aerates up to 9 holes per sq. ft. with single tines; 18 holes per sq. ft. with double tines.
Renovaire® 72” Tow-Behind Aerator• Designed on the “true contour” principle with each pair of tine wheels independently mounted to follow the contour of the land, making for more precise coring.• 72” aerating width.• Up to 4” coring depth.• Comes standard with one set of 0.75” coring tines; 96 tines (8 tines per wheel).• Choice of optional slicing or deep-spoon tines, as well as 0.5” coring tines are available.• Weight trays, with 100 lbs. capacity each, provide maximum penetration in heavily compacted soils.• Productivity rate of up to 3 acres/hr.• Comes standard with hydraulic ram. Optional hydraulic pump available (item # †545370; Retail Price: $1,220).• 1518 lbs.• Item number 544317A
Item Number Description Aerating
Width Weight RETAIL PRICE
544859ACan be operated by any tractor with a Category “0” or Category “1” 3-point hitch capable of lifting 500 lbs.
36” 475 lbs. $2,459
544876ACan be operated by any tractor with a Category “1” 3-point hitch capable of lifting 500 lbs.
48” 675 lbs. $3,399
Tracaire®
72” 3-Point Hitch Aerator• Helps alleviate compaction problems that result from constant heavy use and seasonal changes on athletic fields, parks and other large areas.• 72” aerating width.• Up to 4” coring depth.• Can be operated by any tractor with a Category “1” 3-point hitch.• Comes standard with one set of 0.75” coring tines; 96 tines (12 tines per wheel) in all.• Choice of optional slicing or deep-spoon tines, as well as 0.5” coring tines are available.• Helps the development of healthy, deep-rooted grass so the turf is not uprooted during severe use.• 1,011 lbs.• Item number 544423A
Item Number Description RETAIL PRICE
545711 Hydraulic Lift Kit; Requires 700 PSI for Operation $486
4131949 Electric Lift Kit $792
545654 Manual Lift Kit $294
970315 ZT Hitch Kit $14
Lawnaire® Accessories
Shown here with optional hydraulic pump
544859
RETAIl PRICE
$4,750
RETAIl PRICE
$6,753
RETAIl PRICE
$2,719
Order Online www.gnedi.com Order Online www.gnedi.comRYANSold in MN, ND, SD, N. WI, E. MT and N. MI
RYANSold in MN, ND, SD, N. WI, E. MT and N. MI
RYAN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
RYAN
57
Order Online www.gnedi.com Order Online www.gnedi.comRYANSold in MN, ND, SD, N. WI, E. MT and N. MI
RYANSold in MN, ND, SD, N. WI, E. MT and N. MI
Jr. Sod Cutter Good Balance & Easy Handling • Power for the long haul with commercial engine options.• Pneumatic rear caster absorbs vibration and makes it easy to cut on curved landscapes• Choice of 12” or 18” cutting widths.• 75% of weight rests on the cast iron drive wheel with vulcanized knobby tread for superior traction and stability.• Easy depth (up to 2.5”) and blade angle adjustment for varying soil conditions. • Optional trenching and mole blade attachments available.
Heavy Duty Sod CutterBuilt for Commercial Use• 2 forward speeds, travelling up to 187 ft. per min.• Easy depth (up to 2.5”) and blade angle adjustment for varying soil conditions. • Optional sulky roller, roller ram conversion kit, roll diverter and sod hold-down kits are available to maximize usage of your sod cutter
Item Number Engine Cutting
Width Weight RETAIL PRICE
544953C 160cc Honda OHV 12” 298 lbs. $4,659544954C 160cc Honda OHV 18” 356 lbs. $4,999
† 544951G 182cc Briggs & Stratton Vanguard 12” 298 lbs. $4,319544952G 182cc Briggs & Stratton Vanguard 18” 356 lbs. $4,659
Jr. Sod Cutter AccessoriesItem Number Description RETAIL
PRICE544673 Mole Blade Kit; 1.25” Dia.; Fits 12” Sod Cutters $373544670 Mole Blade Kit; .75” Dia.; Fits 12” Sod Cutters $339
† 544728 Mole Blade Kit; 1.25” Dia; Fits 18” Sod Cutters $486† 544725 Mole Blade Kit; .75” Dia; Fits 18” Sod Cutters $452
546199 Trenching Blade Kit; Fits 12” and 18” Sod Cutters $452546182.7 12” Sod Cutter Blade $564132717.7 18” Sod Cutter Blade $77
† 547408 12” Wheel Assembly $248547424 18” Wheel Assembly $270
544856A Tote Trailer for Jr. Sod Cutters and Lawnaire IV and Lawnaire V Aerators $1,530
Heavy Duty Sod Cutter AccessoriesItem Number Description RETAIL
PRICE
† 2702092 Roll Diverter $1,646
† 545505 Sulky Roller $4,270
† 545395 Rolling Ram Conversion Kit (Req. for Sulky Roller) $193
† 545637 Sod Hold Down Kit $193
515547 16” Heavy Duty Sod Cutter Blade $46
515548 18” Heavy Duty Sod Cutter Blade $59
Item Number Engine Cutting
Width Weight RETAIL PRICE
† 544853F 398cc Kohler Magnum 16” 608 lbs. $11,472† 544854F 398cc Kohler Magnum 18” 608 lbs. $11,715
544953C
544854F
544728
544856A
New & Improved Model - 75% Less Vibration!
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
7262-00-02
58
Tiller/Cultivator Attachments and Accessories
Item Number Item Description RETAIL PRICE
2224DAH-00-02 24” Hedge Trimmer Bar Double Edge Hedge Trimmer Bar; 1” Cap. $1752230SAH-00-02 30” Hedge Trimmer Bar Single Edge Hedge Trimmer Bar; Attaches Easily to 2-Cycle Models, Cuts Branches up to 1” Dia. $1703222-00-02 Border Edger Cuts Neat, Crisp Edges Where Your Flower Beds Meet the Lawn $453333-00-02 Plow Attachment Forms Straight, Uniform Furrows, Both Deep and Shallow $554222-00-02 Lawn Aerator Cuts Thousands of Tiny Slits to Encourage New Growth $704333-00-02 Kickstand Works Like a Bicycle Kickstand, Allowing You to Park Your Tiller Anywhere $255222-00-02 Lawn Dethatcher 60 Strong, Flexible Spring-Steel Picks Pull up Grass Roots, Stoltons and Rhizomes; 15” Swath $1406222-00-02 Planter/Furrower Dig Deep Planting Beds for Potato Eyes, Asparagus Roots, Onion Sets and Flower Bulbs $657321-00-02 Aerator/Dethatcher Combo Aerator/Dethatcher Combo $1708222-00-02 Crevice Cleaner Remove Weeds and Dirt from Cracks in Patios and Sidewalks $609222-00-02 Wheel Set Gives You the Option of Rolling Your Tiller to the Garden $601322-00-02 Tine Detangler Easily Removes Weeds and Vines that Get Wrapped Around the Tiller Tines and Axle $201422-00-02 Handy Item Kit (SV4) For SV4 Series Engine; Includes Oil, Funnel, Spark Plug, Air Filter Pads, Transmission Grease & More $251522-00-02 2-Cycle Engine Oil For Use with Mantis 2-Cycle Tiller, BSV, and Mantis Edger; Box of 6 Pre-measured Bottles $151622-00-02 Tilling/Cultivating Tines Tilling/Cultivating Tines $701722-00-02 Weed Reducer Helps Reduce the Amount of Stringy Weeds and Vines that Wrap Around the Tine Shaft $153444-00-02 Handy Item Kit (22 & 31cc) For Honda 22cc & 31cc Engine Models; Includes Oil, Funnel, Spark Plug, Felt Air Filter Pads and More $35
† 3777 Handy Item Kit (25cc) For Honda 25cc Engine; Includes Oil, Funnel, Spark Plug, Air Filter Pad, Transmission Grease & More $353888 Handy Item Kit (35cc) Handy Item Kit for XP 35cc Honda Engine Models. $40
† 400331 Tilling Tines, XP Tilling Tines for XP Tiller - Outer pair $70† 400332 Tilling Tines, XP Tilling Tines for XP Tiller - Inner pair $135† 400333 Tilling Tines, XP Tilling Tines for XP Tiller - Complete Set $200† 811012 No-Spill Gas Can 1-1/4 Gal.; Auto Stop Removable Nozzle; Thumb-Button Lock; Stops Flow Automatically $20
811005 Tiller Storage Rack Easily, Securely Stores Your Mantis Tiller on a Garage or Shed Wall; Mounting Hardware Included $408444-00-02 Handy Item Kit (SV5)* For SV-5C and SV-5CI Engines; Includes Oil, Spark Plug, Air Filter Pads, Transmission Grease & More $30
† 8777-00-31 Handy Item Kit (SV5) Handy Item Kit for 2-Cycle (SV5) in retail 4 pack tray (must order in multiples of 4) $259333-00-02 Cord Management Kit For Electric Tiller Model; Keeps Cord Safe and Out of the Way While Tilling $80
BorderEdger
LawnAerator
LawnDethatcher
Planter /Furrower
NEW
Mantis Tiller/CultivatorsCompact, Powerful and Reliable• Choice of 2-cycle, 4-cycle, or electric power.• Patented serpentine tines are guaranteed for a lifetime against breakage.• Fold-down handlebars for easy storage.• Electric model includes battery and charger.
7565-12-02
Item Number Power Source Kickstand
IncludedBorder
Edger Incl. Weight RETAIL PRICE
7225-15-02 2-Cycle Engine Yes Yes 22 lbs. $3507225-00-02 2-Cycle Engine No No 24 lbs. $3307225-02-02 2-Cycle Engine No Yes 25 lbs. $3407250-00-02 Electric Motor No No 24 lbs. $3307250-02-02 Electric Motor No Yes 22 lbs. $3167250-15-02 Electric Motor Yes Yes 23 lbs. $3307262-00-02 4-Cycle Honda Engine No No 28 lbs. $4607262-15-02 4-Cycle Honda Engine Yes Yes 34 lbs. $4807565-12-02 XP 4-Cycle Honda Eng. Yes No 41 lbs. $600
NEW XP 16” Tiller • 35cc Honda Engine • 16” Tilling Width • 10” Tilling Depth.
Order Online www.gnedi.com Order Online www.gnedi.comMANTISSold in MN, ND, N. WI and E. MT
MANTISSold in MN, ND, N. WI and E. MT
Eco-Friendly
MAN
TIS
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
MAN
TIS
59
Order Online www.gnedi.com Order Online www.gnedi.comMANTISSold in MN, ND, N. WI and E. MT
MANTISSold in MN, ND, N. WI and E. MT
Mantis E-System1 Power Head and 4 Useful Attachments• Trim, prune, edge, and shape with this 4-in-1 multi-functional extended reach lawn and yard care tool.• Buy just one Power Head, then choose one or more attachment, or buy them all as a set.• Individual attachment options let you customize the E-system to your yard care needs.• Attachments easily switch out with no tools required.• Extra long reach and lightweight design let you easily reach down into those tough spots and into tall trees.• Shown here with Storage Rack, sold separately below.
Item Number Description RETAIL PRICE
330102 E-System Power Head $100330103 E-System Edger Attachment $80330104 E-System Line Trimmer Attachment $80330105 E-System Hedge Trimmer Attachment $80330106 E-System Pruner Attachment $80
ComposT-Twin2-Bin Compost Tumbler• Holds almost 25 cu. ft. of raw material – that’s 10 bushels in each chamber! • Vents on each door allow oxygen into the chamber while vented end caps assure even air flow and proper drainage.• Bin contents are fully enclosed to keep out rodents, pets, and other wildlife.• Frame is a convenient 32” high for easy loading and unloading.• Easy-crank handle and gear mechanisms make the drum easy to turn – even when fully loaded.
Item Number Description RETAIL
PRICE
4000-00-02 ComposT-Twin with Activator and Book $500† 201104 Compost Cover; Weather-Resistant Tarp Winterizes ComposT-Twin $80† 201107 Compost Sifter Screen $45
201108 Includes Moisture Meter & Compost Thermometer $43
4000-00-02
LoaDumper 6 cu. ft. Garden Cart• Great for moving mulch, topsoil, firewood and more.• 350 lbs. capacity.• Easy-to-clean tub has no ridges to catch material.• Unique design keeps wheels on the ground while you unload. • Run-flat tires will not go flat, even when empty of air.• Item number 811039
RETAIl PRICE
$200
Eco-Friendly
SwiftSplit® Electric Log Splitter5 Ton Vertical Splitter• 12” dia./20” long log capacity.• 2-handed switching keeps your hands out of the way.• Can be used indoors or outdoors.• 10” pneumatic tires roll easily over bumpy terrain.• 10 amp circuit breaker and a pressure relief valve protect the hydraulic unit from damage.• Folding handle for easy storage.• Item number 5005RETAIl PRICE
$550
Eco-Friendly
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
60
Item Number Description RETAIL PRICE
† C24 PDL-HYD 24’ Paddle Belt Conveyor, 160cc Honda OHV Engine, Hydraulic Drive $9,395† C26 PDL-HYD 26’ Paddle Belt Conveyor, 160cc Honda OHV Engine, Hydraulic Drive $9,895
Commercial Duty Firewood ConveyorsCut Loading Time and Save on Manpower• 160cc Honda OHV engine.• 8’ minimum operating height; 13’ 8” maximum operating height.• Ideal for moving split firewood out of the way.• Hydraulic drive tells the operator to stop or back-up the drive without stopping the engine.• Heavy steel frame supports an 18” wide 2-ply Rough Top™ belt.• Comes standard with high-speed, DOT-approved wheels & tires and a 2” ball coupler for towing.
PTO Powered Log Splitters
Item Number Splitting Force
Operation
Max Log
Length
Cycle Time
Hyd.Tank & Pump
Cylinder Size
Auto Cycle Log Lift 4-Way
WedgeWedge
Lift Weight RETAIL PRICE
† TW-3 17 Tons Horizontal 26” 6 Sec. 15 Gal.20 GPM 24” x 4” x 2” N/A Optional
(Manual) OPT N/A 450 lbs. $2,470
TW-3HD 22 Tons Horizontal 26” 10 Sec. 15 Gal.20 GPM 24” x 5” x 2” OPT Optional
(Hydraulic) STD OPT 725 lbs. $3,575
TW-S3HD.TIM 20 Tons Horizontal 24” 10 Sec. N/A 24” x 5” x 2” N/A Optional(Hydraulic) OPT N/A 690 lbs. $2,995
TW-3HD also available with a 36” or 48” maximum log length I-beam. Call GNE for details.
TW3-HD
Order Online www.gnedi.com Order Online www.gnedi.comTIMBERWOlFSold in MN, ND, SD, WI and IA
TIMBERWOlFSold in MN, ND, SD, WI and IA
TIM
BER
WO
lF
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
TIMBER
WO
LF
61
Order Online www.gnedi.com Order Online www.gnedi.comTIMBERWOLFSold in MN, ND, SD, WI and IA
TIMBERWOLFSold in MN, ND, SD, WI and IA
Table Grate 4-Way Wedge Hydraulic Log LiftManual Log LiftLog Splitter Accessories
TW-2
Item Number Engine
Splitting Force(Tons)
Operation
Max Log
Length
Cycle Time
Hyd.Tank
& Pump
Cylinder Size
Auto Cycle Log Lift 4-Way
WedgeWedge
LiftWt.
(lbs).RETAIL PRICE
TW-C1 160ccOHC 8 Horizontal 18” 14 Sec. 4 Gal.
4 GPM18” x 3” x
1.25” N/A N/A N/A N/A 255 $1,795
TW-P1 160ccOHV 20 Horizontal 26” 13 Sec. 4.5 Gal.
11 GPM24” x 4” x
1.75” N/A Optional(Manual) OPT N/A 475 $2,795
TW-HV1 160ccOHV 20 Vertical/
Horizontal 24.5” 13 Sec. 7.5 Gal.11 GPM 24” x 4” x 2” N/A N/A N/A N/A 675 $3,795
TW-2 270ccOHV 20 Horizontal 26” 9 Sec. 7.5 Gal.
16 GPM 24” x 4” x 2” N/A Optional(Manual) OPT N/A 575 $3,995
TW-HV2 270ccOHV 25 Vertical/
Horizontal 24.5” 10 Sec. 7.5 Gal.16 GPM 24” x 5” x 2” N/A N/A N/A N/A 775 $4,595
† TW-2HD 270ccOHV 20 Horizontal 26” 9 Sec 15 Gal.
16 GPM 24” x 4” x 2” OPT Optional(Hydraulic) OPT OPT 875 $4,995
TW-2HDLL 270ccOHV 20 Horizontal 26” 9 Sec 15 Gal.
16 GPM 24” x 4” x 2” OPT Standard(Hydraulic) OPT OPT 875 $5,995
Engine-Powered Log SplittersFor Home, Farm, Professional and Rental Use• Powered by Honda engines, with exception of TW-10.• Professional grade and user friendly.• Uncompromising durability and performance.• Frames are precision cut and hand welded.• Larger hydraulic reservoirs which reduce heat buildup and extends the life of the machine.• The only company to offer unique back-saving options like the multi wedges, log lifts and table grates.• The only manufacturer that uses 12” tall wedges on all machines. The ability to split larger logs means increased
production and less work.
TW-P1 TW-HV1
TW-HV2
TW-2HD
Models Shown with Optional Accessories
Item Number Description Fits Splitter Model(s) RETAIL PRICELS10-010 4-Way Splitting Wedge, Small TW-P1 $265LS10-002 4-Way Splitting Wedge, Large TW-7, TW-2, TW2HD, TW-3 $539LS10-003 6-Way Splitting Wedge, Large TW5, TW-6, TW-7, TW-3HD $799LS10-005 Table Grate, Small TW-P1, TW-2, TW-3* $399LS10-004 Table Grate, Large TW-5, TW-5FC, TW-6, TW-7, TW-3HD*, TW-2HD* $669LS10-019 Manual Log Lift, Small TW-P1, TW-2, TW-3 $559
† LS10-018 Hydraulic Log Lift, Large TW-2HD, TW-3HD $1069† LS10-021 Hydraulic Log Lift, Large TW-5, TW-5FC, TW-6 $1069† LS10-025 Hydraulic Log Lift, Large TW-7 $1,199
TW-C1
NEW
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
62
TIM
BER
WO
LF
TW-6LLTW-5LL
TW-10
Item Number Engine
Splitting Force(Tons)
Operation
Max Log
Length
Cycle Time
Hyd.Tank
& Pump
Cylinder Size
Auto Cycle Log Lift 4-Way
WedgeWedge
LiftWt.
(lbs).RETAIL PRICE
† TW-5 340ccOHV 25 Horizontal 26” 10 Sec. 15 Gal.
22 GPM 24” x 5” x 2” STD Optional(Hydraulic) STD STD 950 $7,695
TW-5LL 340ccOHV 25 Horizontal 26” 10 Sec. 15 Gal.
22 GPM 24” x 5” x 2” STD Standard(Hydraulic) STD STD 950 $8,695
† TW-5FC 340ccOHV 20 Horizontal 26” 6 Sec. 15 Gal.
22 GPM 24” x 4” x 2” STD Optional (Hydraulic) STD STD 950 $7,695
† TW-6 610ccOHV 28 Horizontal 26” 8 Sec. 20 Gal.
22 GPM 24” x 5” x 3.5” STD Optional (Hydraulic) STD STD 1,475 $9,495
TW-6LL 610ccOHV 28 Horizontal 26” 8 Sec. 20 Gal.
22 GPM 24” x 5” x 3.5” STD Standard(Hydraulic) STD STD 1,475 $10,995
† TW-7 610ccOHV 28 Horizontal 26” 8 Sec. 20 Gal.
22 GPM 24” x 5” x 3.5” STD Optional (Hydraulic)
Box Wedge
STDOPT 1,675 $12,995
† TW-7LL 610ccOHV 28 Horizontal 26” 8 Sec. 20 Gal.
22 GPM 24” x 5” x 3.5” STD Standard(Hydraulic)
Box Wedge
STDOPT 1,675 $14,150
TW-7LL
Models Shown with Optional Accessories
Order Online www.gnedi.com Order Online www.gnedi.comTIMBERWOLFSold in MN, ND, SD, WI and IA
TURF TEQSold in MN, ND, SD, WI and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
63
Order Online www.gnedi.com Order Online www.gnedi.comTIMBERWOLFSold in MN, ND, SD, WI and IA
TURF TEQSold in MN, ND, SD, WI and IA
Model 1305 Mulit-Use TractorFor Use with Quick Change Attachments Below• Powered by a 390 cc Honda OHV engine.• Hydrostatic transmission with reverse.• Adjustable ground speed control.• Easily change attachments in just minutes.• Differential lock standard; optional parking brake available.• Dramatically increase productivity and profitability with interchangeable quick-change attachments.• Compatible with all Quick-Change attachments, and includes all kits required for each attachment: Differential Lock Kit, Wheel Lock Kit, and Broom/Edger Lift Kit.• Item number 1305TR2
RETaIL PRIcE
$2,700
Quick Change Attachments - For Use with Model 1305 Multi-Use Tractor Above
Power Edger Attachment• Quick adjust depth wheel.• Drive clutch and brake.• Adjustable angle.• Bed grooming blade standard.• Optional trenching blade available.
Item Number Description RETAIL
PRICEA1300E Edger Groomer Attachment $2,211
A1300E1 Edger Groomer & Opener Attach. $2,676
† A1300E2.TUR Bed Opener Attachment $2,486
Brush Cutter AttachmentWith Side Shift Deck• 28” deck with 26” cutting width.• Differential lock.• Replaceable skids.• 2 mowing height adjustments - 2.75” and 3.75”.• Mechanical clutch/brake.• Features Side Shift, which allows the cutting deck to shift up to 12” to the left of center for 12º of articulation between the power unit and the mowing deck. This feature is perfect for mowing under and around trees.• Item number A1305C.TURRETaIL PRIcE
$1,395
Multi-Surface Power Broom AttachmentWith Pivoting Brush• 2-speed brush for debris and snow removal.• 46” wide and 18” dia. brushes.• Easy-reach controls include height control lever, hydro transmission control, left/right pivot trigger, broom drive & brake control, brush speed and brush pressure controls.• Brush cover opens for easy maintenance.
Item Number Description RETAIL
PRICE† A1300B 100% Polypropylene Brush $2,605
† A1300B1 80% Poly / 20% Wire Brush $2,705
Item Number Description RETAIL
PRICEA1305P Abrasive-Resistant Teeth $3,161
A1305P1 Carbide Teeth $3,461
Power Rake AttachmentWith Pivoting Head• 36” drum.• Right/left/center pivot from operator position.• Differential lock (on the go).• Adjustable depth control.• Safe & easy operation on any surface, even on steep inclines.• Easy-reach controls include adjustable ground speed control, drum drive & brake controls, right/left pivot trigger and differential lock.• Applications include preparing seed beds, raking rocks and debris, pulverizing and mixing soil, and repairing and renovating lawns
CONSTRUCTED FOR USE IN COMMERCIAL & RENTAL APPLICATIONSCheck out our complete line of equipment & demos on line at www.turfteq.com
HYDROSTATICALLY SELF-PROPELLED
Power Rake Power BroomBrush Cutter Power Edger
Left/Right Pivot Trigger
AttachmentRaise / Lower
Hydrostatic TransmissionControl (Reverse) Hydrostatic
TransmissionControl (Forward)
TransmissionEngaged/Disengaged
Control
13 HP Honda® Engine
Attachment Mounting Point
AttachmentDrive & Brake
Control
AdjustableGround
Speed Control
Differential Lock –Standard
Park Brake - Optional(K1305PB)
Large Tires- Hydrostatic DriveHeavy 4-Ply 18” x 6.5”
PAGE 3 PAGE 4 PAGE 5 PAGE 7
2
Model 1305 Multi-Use Tractor For Use With Quick Change Attachments
TURF TEQ
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
64
Power EdgerHydrostatic Self-Propelled• Neatly slices existing beds with minimal disturbance to the bed.• No re-mulching necessary.• Front caster wheel allows for 360º pivoting.• Unit design allows line of sight to the cutting edge.• Hydrostatically self-propelled plus reverse speed. • Differential lock and wheel lock not included.• Multiple blade options available. See page 65 for more.
Item NumberMulti-
Purpose Capable
EngineAttachment
Drive Clutch/Brake
Quick Adjust Depth Wheel
Adjustable Angle
Bed Grooming
Blade
Bed Opening
Blade
Trenching Blade
RETAIL PRICE
† 1304B No 344cc Briggs & Stratton No No No N/A Standard Optional $3,450† 1304H No 390cc Honda OHV No No No N/A Standard Optional $3,950† 1304HD.TUR No 390cc Honda OHV Yes Yes No N/A Standard Optional $4,250† 1305SP Yes* 390cc Honda OHV Yes Yes Yes Standard Optional Optional $4,546† 1305SP1 Yes* 390cc Honda OHV Yes Yes Yes Standard Standard Optional $4,999
1305SP2.TUR Yes* 390cc Honda OHV Yes Yes Yes Optional Standard Optional $4,809
1305SP1304H
Item Number Description RETAIL PRICE
† K1305DL Differential Lock Kit - Required to Convert an Edger into a Broom, Rake or Brush Cutter $125
† K1305WL Wheel Lock Kit - Required to Convert an Edger into a Broom, Rake or Brush Cutter $240
K1305LK Broom/Edger Lift Kit - Required to Convert a Rake or Brush Cutter into an Edger $190
Kits Required for Multi-Purpose Use
Item Number Description RETAIL PRICE
† K1305DL Differential Lock Kit - Required to Convert an Edger into a Brush Cutter $125
† K1305WL Wheel Lock Kit - Required to Convert a Brush Cutter into an Edger or Broom $240
K1305LK Broom/Edger Lift Kit - Required to Convert a Brush Cutter into an Edger or Broom $190
Kits Required for Multi-Purpose Use
26” Brush CutterStrong, Reliable and Easy to Maintain• Great for clearing underbrush and saplings, mowing around trees and under fence lines and clearing paths and trails. • Hydrostatic transmission with forward and reverse.• 28” deck with 26” cutting width.• Differential lock.• Replaceable skids.• 2 mowing height adjustments - 2.75” and 3.75”.• Mechanical clutch/brake.• 2 models are dedicated brush cutting units. Model 1305BC can be converted from a brush cutter to a power broom, power rake or power edger by using the conversion kits listed below.• Model 1305BC features Side Shift, which allows the cutting deck to shift up to 12” to the left of center for 12º of articulation between the power unit and the mowing deck. This feature is perfect for mowing under and around trees.
Item Number Multi-Purpose Capable Engine Side
Shift DeckRETAIL PRICE
† 1304BC.TUR No 344cc Briggs & Stratton No $2,9951304HC1.TUR No 340cc Honda OHV No $3,095
† 1304HC.TUR No 390cc Honda OHV No $3,2951305BC.TUR Yes* 390cc Honda OHV Yes $3,795
*May Require Conversion Kit. See Below.
1304HC.TUR
*May Require Conversion Kit. See Below.
Order Online www.gnedi.com Order Online www.gnedi.comTURF TEQSold in MN, ND, SD, WI and IA
TURF TEQSold in MN, ND, SD, WI and IA
TURF
TEQ
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
TURF TEQ
65
Order Online www.gnedi.com Order Online www.gnedi.comTURF TEQSold in MN, ND, SD, WI and IA
TURF TEQSold in MN, ND, SD, WI and IA
Power Edger Blades & AccessoriesItem Number Description Application RETAIL
PRICE16G* Groomer Blade For use with all 1304 and 1305 models $49
16S.TUR Sidewalk Blade Kit For use with all 1304 and 1305 models; includes blade, spacer and mounting hardware $95
† 16S1.TUR Sidewalk Blade Only For use with all 1304 and 1305 models $55
† 16S2.TUR Sidewalk Blade Hardware ONLY For use with all 1304 and 1305 models; includes spacer and mounting hardware $40
16T** Opener Blade For use with all 1304 and 1305 models $280
T1** Trenching Blade; 2”W x 5”D For use with all 1304 and 1305 models $189
T2** Trenching Blade; 1/2”W x 5”D For use with all 1304 and 1305 models $189
T3** Trenching Blade; 2”W x 7”D For use with all 1304 and 1305 models $209
T3N.TUR** Trenching Blade; 1/2”W x 7”D For use with all 1304 and 1305 models $209
T3W.TUR** Trenching Blade; 2-1/2”W x 7”D For use with all 1304 and 1305 models $220
T4** Trenching Blade; 5”W x 5”D For use with all 1304 and 1305 models $220
† K1305PB Parking Brake Kit For use with all 1305 models $50
K1305DT Dethatching/Sweeping Kit Optional for all Power Brooms (Required for natural & synthetic turf) $444
G1 Groomer Guard Assembly For use with 1305SP, 1305SP1 and 1305SP2 ONLY; For use with 16G ONLY $195
† G2 Opener/Trencher Guard Assembly For use with all 1304 and 1305 models; For use with 16T, T1, T2, T3, T3N, T3W and T4 Blades $255
10-0677 Gauge Wheel For use with 1304 Fixed Frame Models $132
* G1 Groomer Guard Assembly Required when Adding to Model 1305SP2.** G2 Opener/Trencher Guard Assembly Required when Adding to Model 1305SP.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
66
TURF
TEQ
1305PR
ItemNumber
Multi-PurposeCapable
Engine Brush Type RETAIL PRICE
1305BR Yes* 390cc Honda OHV 100% Polypropylene $4,9951305BR1 Yes* 390cc Honda OHV 80% Polypropylene/20% Wire $5,095
1305BR
*May Require Conversion Kit. See Below.
Item Number Description RETAIL
PRICE† K1305DL Differential Lock Kit - Required to Convert an Edger into a Broom $125
† K1305WL Wheel Lock Kit - Required to Convert a Broom into an Edger $240
Kits Required for Multi-Purpose Use
36” Hydrostatic Power RakeWith Pivoting Head• 36” drum.• Hydrostatic transmission control w/reverse.• Right/left/center pivot from operator position.• Differential lock (on the go).• Adjustable depth control.• Safe & easy operation on any surface, even on steep inclines.• Easy-reach controls include adjustable ground speed control, drum drive & brake controls, right/left pivot trigger and differential lock.• Applications include preparing seed beds, raking rocks and debris, pulverizing and mixing soil, and repairing and renovating lawns
ItemNumber
Multi-Purpose Capable Engine Number/Type
of TeethRETAIL PRICE
1305PR Yes* 390cc Honda OHV 48 Abrasive-Resistant $5,4501305PR1 Yes* 390cc Honda OHV 48 Carbide $5,750
*May Require Conversion Kit. See Below.
Item Number Description RETAIL PRICE
† K1305DL Differential Lock Kit - Required to Convert an Edger into a Rake $125
† K1305WL Wheel Lock Kit - Required to Convert a Rake into an Edger $240
K1305LK Broom/Edger Lift Kit - Required to Convert a Rake into an Edger or Broom $190
Kits Required for Multi-Purpose Use
Item Number Description RETAIL
PRICEK1305DT Dethatching/Sweeping Kit - Optional for all Power Brooms $444
Optional Accessories
Hydrostatic Power BroomWith Pivoting Brush• 390cc Honda engine.• Hydrostatically self-propelled for increased productivity.• 2-speed brush for debris and snow removal.• 46” wide and 18” diameter brushes are ideal for snow removal, construction clean-up, sidewalks, driveways and parking lots.• Easy-reach controls include height control lever, hydro transmission control, left/right pivot trigger, broom drive and brake control, brush speed & brush pressure controls.• Brush cover opens for easy maintenance.• Includes differential lock; wheel lock not included.
DETHATCH TURF
SWEEP TURF SURFACES
SWEEP HARD SURFACES
SNOW REMOVAL
Shown with Dethatch Kit
Shown with Sweeping Kit
Order Online www.gnedi.com Order Online www.gnedi.comTURF TEQSold in MN, ND, SD and WI
BROWNSold in MN, ND, SD and WI
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
67
Order Online www.gnedi.com Order Online www.gnedi.comTURF TEQSold in MN, ND, SD and WI
BROWNSold in MN, ND, SD and WI
WireMaster™ Wire Installation System• 160cc Honda OHV engine.• Install invisible dog fence or low voltage wire, up to 25’ per minute.• Digs trench, lays wire and covers trench all in the same pass.• Easily converts to an EdgeMaster™ with optional conversion kit, • 94 lbs.• Item number R-460HA
RETaIL PRIcE
$1,725
Edger Conversion Kit Converts WireMaster™ or ReDefiner™ Into an Edger
• Item number 459-001
WireMaster™ Conversion Kit Converts ReDefiner™ to WireMaster™
• Item number 460-001RETaIL PRIcE
$101RETaIL PRIcE
$380
ReDefiner™ The Ultimate Redefining Tool is Here!• 160cc Honda OHV engine.• Redefines existing mulch beds at speeds up to 60’ per minute.• Super maneuverable - make tree rings and fancy designs with ease.• Speed varies upon blade depth and soil conditions.• Easily converts to a WireMaster™ or to an EdgeMaster™ with optional conversion kits, sold separately below. • 90 lbs.• Item number R-450HA
RETaIL PRIcE
$1,625
EdgeMaster™ Power Lawn Edgers• 160cc Honda OHV engine.• Designed for parks, golf courses, resorts, malls, schools, rentals and others with large edging requirements.• Includes 10” scallop-edge blade.• Drop wheel for easily edging next to curbs. • Semi-enclosed blade guard with 10” blade capacity.• Dual belt drive system. • 8” pneumatic turf tires.• 95 lbs.• Item number E-104H/5.5
459-001
RETaIL PRIcE
$1,455
Brush Ox26” Self Propelled Brush Cutter• Hydro-Gear® transaxle with infinite speed control.• Adjustable cutting height.• Cuts up to 2.5” dia. brush and saplings. • Fully enclosed deck to minimize discharge and enhance shredding.• Front and rear discharge protection• Easy maintenance access• Featuring Quadro Cut blade assy. w/ stump jumper.• 394 lbs.
460-001 BRO
WN
Item Number Engine RETAIL PRICE† BC2613HR 390cc Honda OHV $3,395
BC2613HER 390cc Honda OHV, Electric Start $3,595
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
68
TrenchMaster™ Mini Trencher• Lightweight, mini trencher designed for ease of operation. • Easily loaded & unloaded by one person. • Steel ball bearing wheels. • Pneumatic turf tires.• Includes a 7” x 2” clay rotor (702-133) and rotor changing tool.
Item Number Engine
Max. Trench Depth
Weight RETAIL PRICE
F-704H/6.5 200cc Honda OHV 7” 135 lbs. $1,890† F-904H9.0 270cc Honda OHV 9” 145 lbs. $2,325† F-1202H 270cc Honda OHV 12” 265 lbs. $3,455† F-1202H13 390cc Honda OHV 12” 265 lbs. $3,785
F-704H
BedEdger™
Steerable, Multi-Purpose Mini Trencher• Ideal for the landscaper who installs edging as well as sprinkler systems. • It’s the ultimate tool for defining beds or installing plastic or steel edging.• Steerable rear wheels with pneumatic turf tires for easy maneuvering.• Honda OHV engines provide the extra power needed in tough, clay soils.• Includes a 5” BedMaster™ rotor (702-106) and rotor changing tool.
Item Number Engine
Max. Trench Depth
Weight RETAIL PRICE
F-781H 240cc Honda OHV 7” 160 lbs. $2,795F-991H 270cc Honda OHV 9” 165 lbs. $2,960
F-991H
NEW from BROWN
Bantam BedEdger™
Steerable, Multi-Purpose Mini Trencher• Ideal for defining new beds or redefining existing beds.• Quick depth adjustment - 3.5” | 4.25” | 5”• Wheels adjust for defining and redefining beds.• Honda OHV engines provide the extra power needed in tough, clay soils.• Includes a Bantam BedMaster™ rotor (470-019).
Item Number Engine Weight RETAIL
PRICE† B565H.BRO 200cc Honda OHV 110 lbs. $2,055
B580H.BRO 240cc Honda OHV 130 lbs. $2,365
B590H.BRO 270cc Honda OHV 130 lbs. $2,465B580H.BRO
Order Online www.gnedi.com Order Online www.gnedi.comBROWNSold in MN, ND, SD and WI
BROWNSold in MN, ND, SD and WI
BRO
WN
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
BRO
WN
69
Order Online www.gnedi.com Order Online www.gnedi.comBROWNSold in MN, ND, SD and WI
BROWNSold in MN, ND, SD and WI
BedMaster™ Rotors• Specifically engineered for defining landscape beds or for installing plastic edging. • The check shaped trench allows a smooth junction between turf and mulch for a very professional, pleasing landscape bed.
702-107
Clay Rotors• Use square points with a tungsten carbide “fingernail” on each point. • These work well in most soils, except rocky soils.
Specialty Rotors• Custom rotors are available for special jobs like stump removal, bullet type brick edging installation or curb/patio block installation.
702-113
702-131
ItemNumber Description RETAIL
PRICE702-100 Stump Master™ Stump Grinding Rotor $155702-112 4-1/2” x 4-1/2” Rain Drain Rotor, Bullet Edging $144702-102 4-1/2” x 6” Rain Drain Rotor $165702-113 2” x 9” Curbing Rotor $165
ItemNumber Trench Size RETAIL
PRICE702-93 3” Max. Depth; Check-Mark Shaped Trench $155702-93R 3” Redefining Rotor $134702-89 4” Max. Depth; Check-Mark Shaped Trench $155702-106 5” Max. Depth; Check-Mark Shaped Trench $160702-107 6” Max. Depth; Check-Mark Shaped Trench $190
ItemNumber Depth x Width Points RETAIL
PRICE702-82 4” x 1” 2 Points $82702-82A 5” x 1” 2 Points $84702-87 7” x 1” 2 Points $86
† 702-130 3” x 2” 3 Points $98702-131 4” x 2” 3 Points $98702-132 5” x 2” 3 Points $101702-133 7” x 2” 3 Points $10112-110 9” x 2” 3 Points $10812-111 10” x 2” 3 Points $108
702-102
702-93
Drive Belts• Heavy-duty • Extra long life• 2 belts required per machine.
Root and Fence Rotors• Designed to prune roots close to sidewalks, driveways, cart paths or other paved areas, preventing concrete damage. • Also used for installing electronic dog fencing, burying irrigation control wires or lines for low-voltage lighting.
702-90
Carbide Points and Sockets
Rock Rotors• Power through tough material with bullet shaped tungsten carbide points. • Each point mounts in a socket which allows it to be loose and rotate for even wear. • Shown here with 701-32C Carbide Points, sold separately.
702-85
EdgeMaster™
Power Edger Blades• For use with E-94 and E-104 series EdgeMasters™. E200-029-10
Item Number Depth x Width Points RETAIL PRICE
702-92 3” x 1/2” 1 Point $67702-90 4” x 1/2” 1 Point $6912-41 7” x 1/2” 1 Point $71
† 12-41A 5” x 1/2” 1 Point $7112-42A 9” x 1/2” 1 Point $74
Item Number Description RETAIL PRICE
E100-005 10” x 2” Blade $6E200-029-10 10” Starblade, 4.5mm Thick $14
Item Number Description RETAIL PRICE
701-32C Carbide Rock Points with Nuts $20701-33 Point Sockets $12
ItemNumber
Depth x Width Points RETAIL
PRICE
702-58 5” x 1-1/2” Carbide Points Sold Separately $113† 702-85 4” x 1-1/2” Carbide Points Sold Separately $113
12-37 7” x 1-1/2” Carbide Points Sold Separately $118
Item Number Fits Model Series RETAIL
PRICE
701-26 F-702 $10780-30 F-703, F-903, F-704, F-781, F991 $10E200-002 E-104 $11450-767 R-450HA, R-460HA $10
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
70
Saw Devil™Concrete Saws• Lineup consists of the most popular sizes and configurations for the professional contractor working with sawing depths of up to 7-5/8”.• Saw Devils accept most popular blade sizes including 12”, 14”, 16”, 18” and 20” blades for cut depth up to 7-5/8”.• Combination of weight, right or left-hand cut, wide wheelbase balance and a vibration reducing frame for superior productivity.• Line includes 2 manual models and 1 self-propelled model.• Optional water tank kits and blade guard kits in varying sizes available.
Item Number Engine Blade Capacity Max. Cut
DepthGuard Size
Drive Type
Weight (lbs.)
RETAIL PRICE
CS1-01573 240cc Honda OHV 12”, 14” 4-5/8” w/14” Blade 14” Push 175 $2,139
CS1-01590 340cc Honda OHV 12”, 14” 4-5/8” w/14” Blade 14” Push 175 $2,394
CS2-01564 340cc Honda OHV 12”, 14”, 16”, 18” 6-5/8” w/18” Blade 16” Push 310 $3,029
CS2-01596 390cc Honda OHV w/Cyclone Air Cleaner 12”, 14”, 16”, 18” 6-5/8” w/18” Blade 14” Push 310 $3,182
CS2-02055 390cc Honda OHV w/Cyclone Air Cleaner 12”, 14”, 16”, 18” 6-5/8” w/18” Blade 18” Push 310 $3,412
CSP3-01550 390cc Honda OHV w/Cyclone Air Cleaner 12”, 14”, 16”, 18”, 20” 7-5/8” w/20” Blade 16” Self-
Propelled 475 $5,109
CSP3-01557 610cc Honda Electric Start V-Twin w/Cyclone Air Cleaner
12”, 14”, 16”, 18”, 20” 7-5/8” w/20” Blade 18” Self-
Propelled 475 $7,139
CSP3-01561 620cc Honda Electric Start V-Twin w/Cyclone Air Cleaner
12”, 14”, 16”, 18”, 20” 7-5/8” w/20” Blade 18” Self-
Propelled 475 $7,266
CSP3-01605 620cc Honda Electric Start V-Twin w/Cyclone Air Cleaner
12”, 14”, 16”, 18”, 20” 7-5/8” w/20” Blade 20” Self-
Propelled 475 $7,391
Lil’ Devil™
Masonry Block Saws• Blaze through blocks, bricks, paving stones and more with these solid, durable, operator friendly saws.• All-steel frames, sealed ball bearings and stationary engine platforms stand up to the most complicated block cutting.• MS1 is tough, fast, portable and the head, bed and optional stand easily separate into sections, making it perfect for rental.• MS2 is the professional’s choice, ideal for stationary production work of virtually all masonry materials.
Item Number Power Source Blade
CapacityMax.
Cut DepthGuardSize
Table Height
Water Pump
Weight (lbs.)
RETAIL PRICE
MS1-01622 1.5 HP/115V Motor 14” 5” w/ 14” Blade 14” 35” Electric 190 $2,201
MS1-01733 2 HP/230V Motor 14” 5” w/ 14” Blade 14” 35” Electric 190 $2,237
MS1-01624 160cc Honda OHV w/Cyclone Air Cleaner 14” 5” w/ 14” Blade 14” 35” Belt Driven 190 $3,311
MS2-01663 340cc Honda OHV w/Cyclone Air Cleaner 14”, 20” 8” w/ 20” Blade 20” 35” Belt Driven 445 $5,067
MS2-01627 5 HP/230V Motor 14”, 20” 8” w/ 20” Blade 14” 35” Electric 445 $3,739
MS2-01629 240cc Honda OHV w/Cyclone Air Cleaner 14”, 20” 8” w/ 20” Blade 14” 35” Belt Driven 445 $4,477
MS2-01630 240cc Honda OHV w/Cyclone Air Cleaner 14”, 20” 8” w/ 20” Blade 20” 35” Belt Driven 445 $4,526
Several Other Models Available. Call GNE for Details.
Several Other Models Available. Call GNE for Details.
STO
NE
STONESold in MN, ND, SD and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
71
Item Number Engine Drum Size Batch Cap. (Bags) Clutch Type Weight RETAIL
PRICE
465PM-01749 160cc 4 cu. ft. 3/4 - 1 Hand Clutch 276 lbs. $2,475
655PM-01764 160cc 6 cu. ft. 1-1/2 - 2 Front Post Hand Clutch 550 lbs. $2,862
655PM-01765 240cc 6 cu. ft. 1-1/2 - 2 Front Post Hand Clutch 550 lbs. $3,157
655PMP-01932* 160cc 6 cu. ft. 1-1/2 - 2 Front Post Hand Clutch 550 lbs. $3,036
655PMP-01933* 240cc 6 cu. ft. 1-1/2 - 2 Front Post Hand Clutch 550 lbs. $3,373
755PM-01771 240cc 7 cu. ft. 2 - 2-1/2 Front Post Hand Clutch 565 lbs. $3,269
855PM-01778 240cc 8 cu. ft. 2-1/2 - 3 Front Post Hand Clutch 605 lbs. $3,427
855PMP-01924* 240cc 8 cu. ft. 2-1/2 - 3 Front Post Hand Clutch 605 lbs. $3,702
1050PM-01785 240cc 10 cu. ft. 2-1/2 - 3-1/2 Front Post Hand Clutch 875 lbs. $4,965
1265PM-01793 340cc 12 cu. ft. 3 - 4 Front Post Hand Clutch 1,085 lbs. $5,343
1285PM-01796 340cc 12 cu. ft. 3 - 4 Power Blend Mixing 1,120 lbs. $5,880
1285PM-02010 340cc Electric Start 12 cu. ft. 3 - 4 Power Blend Mixing 1,120 lbs. $6,222
1650PM-01808 340cc 16 cu. ft. 4-1/2 - 5-1/2 Power Blend Mixing 1,267 lbs. $9,053
1650PM-02011 340cc Electric Start 16 cu. ft. 4-1/2 - 5-1/2 Power Blend Mixing 1,267 lbs. $9,464
* Poly Drum Model
Champion®
Heavy-Duty Mortar Mixers• Stone mortar, plaster and fireproofing mixers fit every need.• From a small wheelbarrow style to a heavy-duty totally enclosed gear drive mixer, Stone offers more models, more options and more standard features than any other brand.• Powered by Honda OHV engines with Oil Alert™.• Rubber blades (Optional steel blades available).
Buddy® MixersFor Extreme-Duty Mixing Conditions• Designed to address applications that require a more robust, heavy-duty mixer, such as specialty mix applications where the mix is stiffer or much more abrasive.• Applications include, but are not limited to, curbing, terrazo or special additive mixes.• All models feature Honda OHV engines with Oil Alert™• Featuring Dynamic Mixing, which delivers a more complete blend in the first minute of mixing.• Unique drum profile eliminates the dead zone.• Patented seal and bearing design and patented removable housing.• Half-back cowl design allows engine to be started and operated without ever opening the cowl.
Champion® Hydraulic MixersItem Number Power Source Batch Cap.
(Bags)Drum Size Weight RETAIL
PRICE
HM1290-01800 390cc Honda OHV Engine w/Cyclone Air Cleaner 3-4 bags 12 cu. ft. 1,360 lbs. $7,296
HM1290-01801 5 HP/230V Single Phase Electric Motor 3-4 bags 12 cu. ft. 1,360 lbs. $7,959
HM1290-01802 5 HP/230V 3-Phase Electric Motor 3-4 bags 12 cu. ft. 1,360 lbs. $7,659
HM1290-01803 5 HP/460V 3-Phase Electric Motor 3-4 bags 12 cu. ft. 1,360 lbs. $7,659
Item Number Engine Batch Cap. (Bags)
Drum Size
(cu. ft.)Drive Type Dimensions
L x W x H Weight RETAIL PRICE
EXD850-02039BD 240cc 2 8.6 Belt 95.5” x 48” x 68” 796 lbs. $4,199
EXD1100-02042BD 240cc 3 11.1 Belt 100.5” x 48” x 68” 857 lbs. $4,607
EXD1300BD-02045BD 340cc 4 15.8 Belt 125” x 56” x 71.5” 1,084 lbs. $6,038
EXD1300GD-02105D 340cc 4 15.8 Enclosed Gear 125” x 56” x 71.5” 1,084 lbs. $6,563
Several Other Models Available. Call GNE for Details.
Several Other Models Available. Call GNE for Details.
Several Other Models Available. Call GNE
for Details.
STO
NE
STONESold in MN, ND, SD, and IA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
STONESold in MN, ND, SD and IA
72
Champion® Heavy-Duty Concrete Mixers• Stone concrete mixers meet every job site application and include the largest portable concrete mixing capacities in the industry.• Powered by Honda OHV engines with Oil Alert™.
Item Number EngineBatch
Capacity(Bags)
Drum Size Dump Style Drive Weight RETAIL
PRICE
45CM-01484 160cc Honda OHV w/Oil Alert™ 1/3 - 1/2 4 cu. ft. Side Belt 418 lbs. $2,277
65CM-01181 160cc Honda OHV w/Oil Alert™ 1/2 - 1 6 cu. ft. Side Belt 690 lbs. $3,117
65CM-01182 160cc Honda OHV w/Oil Alert™ 1/2 - 1 6 cu. ft. Side Chain 690 lbs. $3,117
65CM-00708 240cc Honda OHV w/Oil Alert™ 1/2 - 1 6 cu. ft. Side Chain 740 lbs. $3,348
65CM-00714 240cc Honda OHV w/Oil Alert™ 1/2 - 1 6 cu. ft. Side Belt 740 lbs. $3,348
75CM-01501 240cc Honda OHV w/Oil Alert™ 3/4 - 1-1/4 7 cu. ft. Side Chain 690 lbs. $3,893
75CM-01510 160cc Honda OHV w/Oil Alert™ 3/4 - 1-1/4 7 cu. ft. Side Chain 690 lbs. $3,650
95CM-00710 240cc Honda OHV w/Oil Alert™ 1 - 1/2 9 cu. ft. Side Chain 800 lbs. $4,195
95CM-00716 240cc Honda OHV w/Oil Alert™ 1 - 1/2 9 cu. ft. Side Belt 800 lbs. $4,195
105CM-01528 240cc Honda OHV w/Oil Alert™ 1-1/4 - 1-3/4 10 cu. ft. Side Belt 821 lbs. $4,740
125CM-01478 340cc Honda OHV w/Oil Alert™ 1-1/2 - 2 12 cu. ft. Side Chain 897 lbs. $6,306
Little Champ® Compact Portable Mixers• For homeowner projects, feed blending on the farm, small jobs on the construction site, or in the rental fleet, these mixers pack a punch.• Select from 3 models: wheelbarrow style, pedestal style or the combination style mixer that gives you two mixers in one with a wheelbarrow style and a pedestal style mixer in the same unit.• Pedestal models swivel 360º for easy loading and precision dumping.
Item Number Motor Configuration Drum Size Batch Capacity(Bags) Weight RETAIL
PRICE
25CMP-01909 1/3 HP; 115V; 175 RPM Wheelbarrow 2 cu. ft. 1/4 Bag 123 lbs. $711
25CMPT-01911 1/3 HP; 115V; 175 RPM Pedestal 2 cu. ft. 1/4 Bag 113 lbs. $711
25CMPC-02014 1/3 HP; 115V; 175 RPM Combination 2 cu. ft. 1/4 Bag 148 lbs. $772
Several Other Models Available. Call GNE for Details.
Several Other Models Available. Call GNE for Details.
Smooth Operator™
Power Screeds• Central power unit easily clamps to 2” x 6” or 2” x 8” screed boards, and can be easily operated by one person.• 2 sizes (400# and 800#) are job-matched for high-slump and low slump applications.• Adjustable handle allows screed to be used in either direction.
Item Number Engine Beam Length
Centrifugal Force Weight RETAIL
PRICE
VS400-00223 206cc Briggs & Stratton Up to 15’ 400 lbs. 116 lbs. $1,316
VS400-01123 160cc Honda OHV Up to 15’ 400 lbs. 116 lbs. $1,696
VS800-00846 160cc Honda OHV Up to 30’ 800 lbs. 122 lbs. $1,996
VS800-01261 206cc Briggs & Stratton IP Up to 30’ 800 lbs. 122 lbs. $1,625
Several Other Models Available. Call GNE for Details.
STO
NE
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
STONESold in MN, ND, SD and IA
73
STO
NE
Item Number Engine Asphalt Model Plate Size
EccentricForce VPM Applications Weight RETAIL
PRICE
SFP2200-01985 120cc No 13” x 21” 2,200 lbs. 6,100 Ideal for Small Jobs, Trenches, Granular Soils and Backfilling 140 lbs. $2,061
SFP2200A-01986 120cc Yes; 7.5 Qt. Removable Water Tank Included 13” x 21” 2,200 lbs. 6,100 Asphalt Patching or Finishing 140 lbs. $2,188
SFA3500-02007 160cc Yes; Custom Water System & Removable Tank 20” x 24” 3,500 lbs. 5,200
Asphalt-Specific Model; Ideal for Any Asphalt Patching and Finishing
Application205 lbs. $2,811
SFP3000-01989 160cc No 20” x 24” 3,000 lbs. 6,000Ideal for Soil Compaction on Small
Jobs and Places where a Light Compactor is Desired
198 lbs. $2,615
SFP3000A-01990 160cc Yes; 13 Qt. Removable Water Tank Included 20” x 24” 3,000 lbs. 6,000 Asphalt Patching or Finishing 200 lbs. $2,738
SFP4000-01995 160cc No 20” x 24” 4,000 lbs. 5,200 Ideal for Medium-Sized Compaction Jobs on Most Soil Types 210 lbs. $2,751
SFP4000A-01996 160cc Yes; 13 Qt. Removable Water Tank Included 20” x 24” 4,000 lbs. 5,200 Ideal for Medium-Sized
Compaction Jobs 210 lbs. $2,875
SFP5100-02003 160cc No 20” x 24” 5,100 lbs. 5,200Ideal for Rough Ground and
High Compaction Needs on Most Soil Types
221 lbs. $3,637
Stomper® 4-Cycle Rammers• 4 models, ideal for every job site compaction need, from narrow trenches to areas requiring optimum impact.• Unique design combines precise spring force, crank throw and weight to produce maximum impact force.• Engine design also allows the Stomper® to be laid down in any direction for easy transport and provides worry-free starting when standing.• The engine and carburetor are specifically designed for rammer applications. • Leading-edge, innovative technology and precision components means a line of well-balanced, smooth running, dependable rammers.
Item Number Engine Shoe ImpactForce
Carburetor Type Applications Weight RETAIL
PRICE
XH670-01975 100cc Honda 10” x 13” Poly Shoe 2,650 lbs. Light Float Pipe, Cable and Other Utility Trenches 132 lbs. $3,766
XH670D-02050 100cc Honda 10” x 13” Poly Shoe 2,650 lbs. Light Diaphragm Pipe, Cable and Other Utility Trenches 132 lbs. $3,766
XH730-01977 100cc Honda 11” x 13” Poly Shoe 3,100 lbs. Medium Float A Great All-Purpose Stomper 140 lbs. $4,389
XH730D-02047 100cc Honda 11” x 13” Poly Shoe 3,100 lbs. Medium Diaphragm A Great All-Purpose Stomper 140 lbs. $4,389
XH840-01978 120cc Honda 11” x 13” Poly Shoe 3,500 lbs. Heavy Duty Compacting Footings, Foundations and Heavy-Duty Jobs 145 lbs. $4,876
Silver Fox® Forward Plate Compactors• Self-cleaning base plate eliminates rock and dirt buildup for easier maintenance.• Synchronized drive system requires only one belt for efficient power transfer.• Single-piece heavy-duty centrifugal clutch delivers greater reliability.• Removable polyethylene water tank won’t rust (available on asphalt models).• Patented sprinkler system with Snap-Tek™ coupler to connect the water tank.• Roll cage protects engine and components.• All models feature Honda OHV engines.
Several Other Models Available. Call GNE for Details.
Several Other Models Available. Call GNE for Details.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
STONESold in MN, ND, SD and IA
74
STO
NE
Stake Bed Mud Buggy 3-in-1 Versatility• 3-in-1 stake bed configuration: converts from standard stake bed to flatbed or to an extended flatbed.• Zero-turn radius steering & all terrain stability.• Fold-up operator platform.• 42” wheel base. • Optional foam-filled tires available.• Optional quick-release hubs convert unit from dual to single wheels for fitting through doorways.
Item Number Engine Tires Tub Capacity Weight RETAIL PRICE
FB1000-01942 390cc Honda OHV Pneumatic 10 cu. ft./2,500 lbs. 1,590 lbs. $10,605
Flatbed
Extended Flatbed
Standard Stake Bed
Mud Buggy Gets You and Your Load Where It Needs to Go• Zero-turn radius steering & all terrain stability.• Fold-up operator platform.• Travels up to 6.8 mph.• Optional foam-filled tires available.• Optional quick-release hubs convert unit from dual to single wheels for fitting through doorways.
Item Number Engine Tub Type Tires Tub Capacity Weight RETAIL PRICE
SB1600-01831 390cc Honda OHV Poly Pneumatic 16 cu. ft./2,500 lbs. 1,440 lbs. $9,701
SB2100-02102 390cc Honda OHV Steel Pneumatic 21 cu. ft./3,200 lbs. 1,610 lbs. $11,339
Several Other Models Available. Call GNE for Details.Poly Tub
Steel Tub
Item Number Engine Troweling Area (Dia.)
# of Blades Type of Blades ProPitch Blade
Adjustment Weight RETAIL PRICE
CF24E-01830 120cc Honda OHV 24” 4 Combination No 130 lbs. $2,402
CF36L-02036 160cc Honda OHV 36” 4 Combination No 180 lbs. $2,472
CF36L-02034 160cc Honda OHV 36” 4 Finish No 180 lbs. $2,442
CF364-01337 160cc Honda OHV 36” 4 Combination No 170 lbs. $2,524
CF364-01316 160cc Honda OHV 36” 4 Finish No 170 lbs. $2,495
CF464-01346 240cc Honda OHV 46” 4 Combination No 200 lbs. $3,043
CF464-01327 240cc Honda OHV 46” 4 Finish No 200 lbs. $3,018
CF484-01919 340cc Honda OHV 48” 4 Combination No 270 lbs. $3,493
CF484-01918 340cc Honda OHV 48” 4 Finish No 270 lbs. $3,469
CF364-01388-PP 240cc Honda OHV 36” 4 Combination Yes 170 lbs. $2,990
CF364-01317-PP 240cc Honda OHV 36” 4 Finish Yes 170 lbs. $2,964
CF484-01940-PP 390cc Honda OHV 48” 4 Combination Yes 200 lbs. $3,901
CF484-01939-PP 390cc Honda OHV 48” 4 Finish Yes 200 lbs. $3,877
Smooth Operator™
Concrete Trowels• Precision handling for the professional finisher.• Patented Dyna-Clutch® system stops blade rotation independently from the engine for operator safety.• Low center of gravity for stability and smooth operating.• Adjustable, body-contouring handles and cushioned hand grips.• ProPitch provides quick, smooth blade pitch changes.
Trowel Dolly• Easily transport your trowel.• Trowel sold separately.• Item # 9240.
RETaIL PRIcE
$128
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
ROL-aIRSold in MN, ND, SD, WI and IA
75
Gasoline Powered Belt DrivePortable Compressors• Oil level sight gauge.• Oversized flywheel for extra cooling.• Splash lubricated pump with cast iron cylinders for long life.• Aftercooler standard.• Idle-down throttle reduces fuel consumption when air is not demanded.• Model 4090HK17 runs approx. 4-5 framing guns or approx. 5-7 roofing guns.• Includes regulator and gauge set (Item # 38RG).
Item Number Engine CFM Stage Tank Weight RETAIL PRICE
4090HK17W/38RG 160cc Honda OHV 8.9 1 9.0 Gal. 174 lbs. $1,296
6590HK18W/38RG 200cc Honda OHV 13.1 1 9.0 Gal. 179 lbs. $1,555
† 1040HK18W/38RG 240cc Honda OHV 13.6 1 9.0 Gal. 217 lbs. $1,806
8422HK30W/38RG 240cc Honda OHV 19.2 2 9.0 Gal. 286 lbs. $2,222
† 8230HK30W/38RG 240cc Honda OHV 19.2 2 20 Gal. 338 lbs. $2,407Several Other Models Available. Call GNE for Details.
4090HK17W/38RG
RO
L-aIR
Gasoline PoweredDirect Drive Portable Compressor• 120cc Honda OHV engine.• Single stage.• 4.5 gallon tank; 4.4 CFM.• 110/135 PSI operating pressure• Splash lubricated pump• Stainless steel reed valve• 72 lbs.• Item number GD4000PV5H
RETaIL PRIcE
$990
Item Number Motor HP/RPM PSI CFM Tank Weight RETAIL PRICE
FC1500HBP2 1.5 HP/3,400 RPM 125 3.6 1.5 gal. 39 lbs. $239
FC1500HS3 1.5 HP/3,400 RPM 125 3.6 2.5 gal. 43 lbs. $249
FC1500HBP2 FC2002
Stacked Tank DesignElectric Powered Compressor• 2 HP, 115V AC electric Motor• 125 PSI | 4.0 CFM• 115V AC heavy-duty electric motor.• Cast-iron cylinder.• Regulator with air line pressure gauge.• Overload protection with manual reset.• Stainless steel reed valve.• 62 lbs.
RETaIL PRIcE
$332
Hot Dog DesignElectric Powered Compressors• 95/125 PSI operating pressure.• 115V AC heavy-duty electric motor.• Single cylinder / cast iron cylinder.• Splash lubricated pump.• Regulator with air line pressure gauge, manual reset overload protection and stainless steel reed valve standard.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
76
Order Online www.gnedi.com Order Online www.gnedi.comDOSKOSold in MN, ND, SD, WI and IA
DOSKOSold in MN, ND, SD, WI and IA
Stump Grinders• Direct belt drive.• Commercial-duty engine options. • The unique side-discharge frame automatically removes cuttings from the machine. • Carbide-tipped cutter teeth.• Adjustable handle bar.• Now with Greenteeth® (except model 200-6H features Leonardi teeth)• All Dosko stump grinders are under 32” wide, so they will fit through a standard gate.
Item Number Engine Electric
Start Towable Self-Propelled
UnitWeight
RETAIL PRICE
200-6H 200cc Honda OHV No No No 134 lbs. $2,399270-9H 270cc Honda OHV No No No 199 lbs. $3,299337-13H 390cc Honda OHV No Yes No 300 lbs. $4,199357-13HE 390cc Honda OHV Yes Yes No 300 lbs. $4,499620-25KE 721cc Kohler Yes Yes No 300 lbs. $6,499620-20HE 620cc Honda V-Twin Yes Yes No 400 lbs. $5,799691SP-25KE 721cc Kohler Yes No Yes 400 lbs. $8,999691SP-20HE 620cc Honda V-Twin Yes No Yes 500 lbs. $7,999
337-13H
ItemNumber Description RETAIL PRICE
16235 Complete Carbide Stump Grinder Tooth Set $7510173-A Tooth Gauge $1216175 Carbide Left Tooth (2 Required) $1016174 Carbide Right Tooth (2 Required) $1016173 Carbide Straight Tooth (4 Required) $10783557 Green Tooth for Models 337 and 357 (8 Required) $10783558 Green Tooth for Models 620 and 691 (8 Required) $17784165 Straight Pocket for Models 337 and 357 (4 Required) $30784166 Straight Pocket for Models 620 and 691 (4 Required) $30783554 Angled Pocket for Models 337 and 357 (4 Required) $30783559 Angled Pocket for Models 620 and 691 (4 Required) $30783555 Pocket Bolt for Models 337, 357, 620 and 691 $4337-357TP Bolt on Tow Package for 337/357 Models $219620-TP Weld on Tow Package for 620 Models $239
691SP-20HE620-25KE
Stump Grinder Accessories
DO
SKO
16235
783557
784165
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Center | Call For Dealer Discount
NEW MINI STUMP GRINDER NEW MID-SIZE STUMP GRINDER • Just 134 lbs.• Leonardi® Teeth • 36”L x 23”W x 23”H Folded
• Just 199 lbs.• Green Teeth • 52”L x 32.5”W x 26”H Folded
200-6H 270-9H
NEW NEW
Order Online www.gnedi.com Order Online www.gnedi.comDOSKOSold in MN, ND, SD, WI and IA
DOSKOSold in MN, ND, SD, WI and IA
77
DO
SKO
13-16T-13H
Auto-Feed Chippers• Available in 6, 9 or 10” cutting capacity.• 180° access to flywheel knives & bed knife.• Reverse or replace cutting knives easily - even at the job site.• 360° rotating discharge chute. • 72” long feed table for maximum operator safety.• Smart Feed system monitors the chipper shaft RPM and automatically adjusts the feed roller speed. Smart Feed reduces engine stress, increases clutch and belt life with fewer jams and better productivity. • Trailer light package standard.
510SD-6-30KE 610SD-10-87DD
Item Number Engine Cutting Capacity Weight RETAIL
PRICE510-6-30KE 747cc Kohler, Electric Start 6” 2,285 lbs. $16,679
510-6-38KE 999cc Kohler, Electric Start 6” 2,310 lbs. $17,645
510SD-9-30KD 91.47 CI Kubota Diesel 9” 2,765 lbs. $23,995
610SD-10-87DD 172.70 CI Deutz Turbo Diesel 10” 3,780 lbs. $35,945
13-16T-13H
EASY ACCESS TO KNIVES, ANVIL, FEED ROLLERS AND BELTS
CHIPPING - MATERIAL IS FEED THROUGH SIDE HOPPER MULCHING - MATERIAL IS FEED THROUGH TOP HOPPER
3-In-1 Units Gravity Feed Chipper/Mulcher/Recyclers• 8” x 8” mulcher feed opening.• Patented design lets you chip, mulch and recycle.• Separate feed openings for chipping and for mulching/recycling.• Adjust the size of the chips by changing mulcher screens.• Recycles aluminum cans, cardboard, telephone books, PVC tubing, shingles & more!
Item Number Engine Chipper Feed Opening
Cutting Capacity Flywheel Unit
Weight RETAIL PRICE
13-16T-13H 390cc Honda OHV 3” x 3” 2.5” 16” 390 lbs. $4,2992022-20HE 620cc Honda OHV, Electric Start 4” x 5” 3.5” 22” 930 lbs. $8,699
2022-20HE
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Center | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
Eco-Friendly
78
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
Honda Engine Dealer ProgramsAvailable to Dealers in MN, ND and SD
Honda Engine Sales Resource Guide• Available to Honda Engine Dealers• Handy guide includes detailed engine features and competitive advantages, full line engine and replacement engine price lists, top selling Honda Engine model list, model ID guide, Go Kart Guide, HP rating guide, troubleshooting tips and more.• Honda Engine dealers, request your complimentary copy today by calling the GNE Power Team at 1-800-822-0295.
Item No. C2011.HEN
100% LEAN
HO
NDa E
NG
INES
The HONDA DifferenceHonda has built their reputation on quality, value, innovation and performance. It’s clear in every product they build, especially the engine. They are the leading manufacturer of small gas engines and the preferred brand of choice. It’s clear that customers demand Honda as their Top of the Line Choice when it comes to power equipment, shouldn’t you? Call GNE and we’ll show you how Honda leads the way and why becoming a Honda Dealer is the smart choice for you.
If you want to service Honda Engines or possibly upgrade your dealership, contact the PowerTeam for more information today at 800-822-0295!
GNE offers various Honda Engine Dealer Programs to meet the needs of a variety of dealers types. All of our programs allow dealers to take advantage of the following benefits for a nominal annual renewal fee. Not only will you be selling and servicing the best brand out there of small gas engines, but you’ll also receive:
1. Access to our dealer portal the Powerlink, for warranty processing, technical references and more!2. Shop Manual Service CD that covers all Honda Power Equipment and General Purpose Engines.3. Access for one technician to attend our annual Honda Engine Service School.4. Marketing and Promotional Materials available to promote Honda Engines in your dealership.
HONDA DEALER TYPESListed Dealer:Provides sales, parts, service and warranty repair on all Honda Engines and Honda powered Equipment. Dealers will also be listed on Honda’s dealer locator on both honda.com and gnedi.com
Unlisted Dealer:Provides sales, parts, service and warranty repair on Honda Engines that is retailed at dealership.
Rental Dealer:Allows rental stores to service and purchase parts, service and perform warranty repairs on rental fleet.
National Account Dealer:Allows power equipment dealers that carry one of the following lines of equipment to provide sales, parts, service and warranty repair on that line of equipment only. (Honda Nat’l Approved Accts: Honda Power Equipment, MTD, Toro and True Value stores)
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount 79
HO
NDa EN
GIN
ES
Horizontal Shaft, 4-Stroke Overhead Valve Engines• Single cylinder, commercial-duty engines.• Cast iron cylinder sleeve• Easy-starting• Fuel efficient• Automatic Decompression• EPA and CARB compliant
GX120Common ApplicationsEdgers, Pumps, Reel Mowers, Agricultural Equipment, Greens Mowers, Small Construction Equipment, Rammers (Compaction Equipment)
GX160Common ApplicationsAir Compressors, Generators, Pumps, Pressure Washers, Reel Mowers, Go-Karts, Agricultural Equipment, Chippers/Shredders, Small Construction Equipment, Concrete Saws
GX200Common ApplicationsAir Compressors, Generators, Pumps, Pressure Washers, Reel Mowers, Go-Karts, Agricultural Equipment, Chippers/Shredders, Small Construction Equipment, Concrete Saws
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
GX160UT1QXC9 160cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Cyclone Air Cleaner Yes 33 lbs. $439
GX160UT1RH2 160cc 2-3/32 x 22 mm. tapped M8 x 1.25” 2:1 Gear Reduction w/Wet Clutch No 45 lbs. $554
GX160UT1HX2 160cc 2-3/64 x 3/4” dia. 6:1 Gear Reduction Yes 46 lbs. $508
GX160UT1QX2 160cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Standard Yes 33 lbs. $333
† GX160UT1QA2 160cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Oil Bath Air Cleaner No 33 lbs. $333
GX160UT1QXE2 160cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Electric Start Yes 33 lbs. $534
GX160UT1QXS2 160cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Standard w/Charge Coil Yes 33 lbs. $388
GX160UT1LX2 160cc 2-3/32 x 20 mm. tapped M8 x 1.25” 2:1 Gear Reduction w/Clutch Yes 35 lbs. $417
GX160UT1TX2 160cc 2-7/16 x 5/8” threaded PTO shaft Water Pump Yes 33 lbs. $360
GX160UT1VA2 160cc 2-53/64 x 3/4” dia. tapered 2 1/4” per ft. Generator Yes 33 lbs. $347
GX160
GX200UTRH2 200cc 2-3/32 x 22 mm dia. tapped M8 x 1.25” 2:1 Gear Reduction w/Wet Clutch Yes 45 lbs. $593
GX200UTHX2 200cc 1-31/32 x 3/4” dia. 6:1 Gear Reduction Yes 41 lbs. $546
GX200UQXC9 200cc 2-7/16 x 3/4” dia. tapped 3/8” 24 UNF Cyclone Air Cleaner Yes 33 lbs. $498
GX200UTQX2 200cc 2-7/16 x 3/4”” dia. tapped 5/16” 24 UNF Standard Yes 33 lbs. $352
GX200UTTX2 200cc 2-7/16 x 5/8” threaded PTO shaft Water Pump Yes 33 lbs. $381
GX200
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICE
GX120UTQXC9 120cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Cyclone Air Cleaner Yes 34 lbs. $420
GX120UT1HX2 120cc 2-3/64 x 3/4” dia. 6:1 Gear Reduction Yes 40 lbs. $474
GX120UT1QX2 120cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Standard Yes 34 lbs. $320
GX120UT1QXS2 120cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Standard w/Charge Coil Yes 34 lbs. $374
GX120UT1TX2 120cc 2-7/16 x 5/8” threaded Water Pump No 34 lbs. $338
† GX120UT1QA2 120cc 2-7/16 x 3/4” dia. tapped 5/16” 24 UNF Oil Bath Air Cleaner No 29 lbs. $308
GX120
GX SERIES
DEPEND ON IT.
TORO DINGOSold in MN, ND, SD and IA
80
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
HO
NDa E
NG
INES
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
GX270UT2QA2 270cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Standard Yes 55 lbs. $578
GX270UT2QAE2 270cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 12V Electric Start; 3Amp Chg. Sys. Yes 63 lbs. $760
GX270UT2QXC9 270cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Cyclone Air Cleaner Yes 55 lbs. $655
GX270UT2QAR2 270cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 18Amp Charge System Yes 55 lbs. $729
GX270UT2HA2 270cc 3-5/32 x 1” dia. 6:1 Gear Reduction Yes 58 lbs. $746
GX270UT2PA2 270cc 3-1/2 x 1” dia. 14 NF threaded Water Pump Yes 55 lbs. $637
GX270UT2RA2 270cc 2-23/64 x 22 mm tapped M8 x 1.25” 2:1 Gear Reduction w/Wet Clutch Yes 56 lbs. $850
GX270UT2VA2 270cc 4-11/64 x 22.2 mm taper 21/4” per ft. Generator Yes 55 lbs. $624
GX2
70
GX340UT2QA2 340cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Standard Yes 69 lbs. $607
GX340UT2QAE2 340cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 12V Electric Start; 3Amp Chg. Sys. Yes 68 lbs. $825
GX340UT2QNE2 340cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 12V Electric Start; 10A Chg. Sys. Yes 68 lbs. $872
GX340UT2QXC9 340cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Cyclone Air Cleaner Yes 68 lbs. $728
GX340UT2QNR2 340cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Electric Start; 18A Charge System Yes 68 lbs. $927
GX340UT2HA2 340cc 3-5/32 x 1” dia. 6:1 Gear Reduction Yes 77 lbs. $847
† GX340UT2LX2 340cc 2-23/64 x 25 mm tapped M8 x 1.25” 2:1 Gear Reduction w/Clutch Yes 77 lbs. $816
† GX340UT2VA2 340cc 4-11/64 x 7/8” taper 21/4” per ft. Generator Yes 68 lbs. $694
GX390UT2QA2 390cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Standard Yes 68 lbs. $627
GX390UT2QAE2 390cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 12V Electric Start; 3Amp Chg. Sys. Yes 68 lbs. $833
GX390UT2QXC9 390cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF Cyclone Air Cleaner Yes 68 lbs. $736
GX390UT2QNE2 390cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 12V Elec. Start; 10Amp Chg. Sys. Yes 68 lbs. $876
GX390UT2QNR2 390cc 3-31/64 x 1” dia. tapped 3/8” 24 UNF 12VElec. Start; 18Amp Chg. Sys. Yes 68 lbs. $925
GX390UT2HA2 390cc 3-15/16 x 1” dia. 6:1 Gear Reduction Yes 77 lbs. $850
GX390UT2LX2 390cc 2-23/64 x 25 mm tapped M8 x 1.25” 2:1 Gear Reduction w/Clutch Yes 77 lbs. $840
GX390UT2PA2 390cc 3-1/2 x 1” threaded Water Pump Yes 68 lbs. $726
GX3
40G
X390
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICEGX240UT2QA2 240cc 3-31/64 x 1” dia. tapped 7/16” 20 UNF Standard Yes 55 lbs. $564
GX240UT2QAE2 240cc 3-31/64 x 1” dia. tapped 7/16” 20 UNF 12V Electric Start Yes 63 lbs. $740
GX240UT2QXC9 240cc 3-31/64 x 1” dia. tapped 7/16” 20 UNF Cyclone Air Cleaner Yes 55 lbs. $626
GX240UT2QAR2 240cc 3-31/64 x 1” dia. tapped 7/16” 20 UNF 18A Charge System Yes 55 lbs. $813
GX240UT2RA2 240cc 2-3/54 x 22 mm tapped M8 x 1.25” 2:1 Reduction w/Wet Clutch Yes 56 lbs. $828
GX240UT2HA2 240cc 3-15/64 x 1” dia. 6:1 Gear Reduction Yes 58 lbs. $712
GX240UT2PA2 240cc 3-1/2 x 1” dia. 14NF threaded Water Pump Yes 55 lbs. $612
GX2
40
GX340Common ApplicationsCommercial Turf Equipment, Lawn Tractors, Propane Floor Buffers, Riding Mowers, Blowers/Vacs
GX390Common ApplicationsLawn Tractors, Pressure Washers, Go-Karts, Agricultural Equipment, Chippers/Shredders, Air Compressors, Concrete Saws
GX SERIES
GX270Common ApplicationsCement Mixers and Trowels, Blowers/Vacs, Pressure Washers, Generators, Go-Karts, Concrete Saws
GX240Common ApplicationsConcrete Mixers, Concrete Trowels and Saws, Air Compressors, Water Pumps, Agricultural Equipment
Next Generation Large GX Series
More Power, Increased Fuel Economy, Significant Noise and Vibration Reduction and More!
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount 81
HO
NDa EN
GIEN
S
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
GX630/GX660/GX690 Common ApplicationsPressure Washers, Stump Grinders, Commercial Turf Equipment, Vacuum Systems, Chippers, Grain Augers
Horizontal Shaft V-Twin Series Twin Cylinder Overhead Valve Engines • 4-stroke. • Electric start.• Automotive, spin-on oil filter. • 2 barrel, fuel cut solenoid, inner vent carburetor. • Digital CDI with variable ignition timing system.
NEW
New Features:Higher horsepower, improved adaptability, greater compactness, convenient controls, greater fuel economy and, for the first time ever, a 3-year limited engine warranty.
GX630
Item Number Displacement PTO Specifications Variation Oil
Alert™ Wt. RETAILPRICE
GX630RQAF1 690cc 1” Straight (Q - Type)
Manual Throttle & Choke Control, Standard Oil Filter, Standard Fan Cover w/Protector, Electric Start, 20A Charge Coil, 20A Regulator/Rectifier, Control Box
No 98 lbs. $1,353
GX630RQXC2 690cc 1” Straight (Q - Type)
Manual Throttle Control, Manual Choke Control, Standard Oil Filter, Standard Fan Cover w/Protector, Electric Start, 3A Charge Coil, 3A Rectifier, Control Box, Oil Shut Down
Yes 98 lbs. $1314
GX630RQYF 690cc 1” Straight (Q - Type)
Remote for Wiring Throttle, Remote for Wiring Choke, Std. Oil Filter, Screen - Type Fan Cover w/Recoil Cord Hole, Screen Grid, 20A Charge Coil, 20A Regulator/Rectifier
Yes 98 lbs. $1,294
GX630RQZB2 690cc 1” Straight (Q - Type)
Manual Throttle Control, Manual Choke, Side - Mount Oil Filter, Screen - Type Fan Cover w/Recoil Cord Hole, Back - Up Recoil Start, 20A Charge Coil, Control Box, 20A Regulator/Rectifier
Yes 98 lbs. $1,363
† GX630RQZB3 690cc 1” Straight (Q - Type)
Manual Throttle & Choke Control, Std. Oil Filter, Std. Fan Cover w/Protector, 20A Charge Coil, 20A Regulator/Rectifier
Yes 98 lbs. $1,365
GX630RQZE 690cc 1” Straight (Q - Type)
Manual Throttle Control, Manual Choke, Std. Oil Filter, Screen-Type Fan Cover w/Recoil Cord Hole, Back - Up Recoil Start, 3A Charge Coil, Control Box, 3A Rectifier
Yes 98 lbs. $1,314
GX630RQAF 690cc 1” Straight (Q - Type)
Remote (Wire) Throttle Control, Remote (Wire) Choke, 17A Charge Coil, Fan Cover with PTO Shaft Hole, Standard Air Filter
98 lbs. $1,258
GX630RQDF2 690cc 1” Straight (Q - Type) 98 lbs. $1,221
GX630RQXA 690cc 1” Straight (Q - Type)
Remote (Rod) Throttle Control, Remote (Rod) Choke, 2.7A Charge Coil, Key Switch Control Box, Standard Fan Cover with Protector, Standard Air Filter, Oil Alert
Yes 98 lbs. $1,307
GX630RVXE1 690cc Tapered(V - Type) 98 lbs. $1,314
GX630RTXF2 690cc 1-1/8” Straight(T - Type)
Remote (Rod) Throttle Control, Remote (Rod) Choke, Standard Oil Filter, Screen - Type Fan Cover w/Recoil Cord Hole, Electric Start, Back - Up Recoil Start, Screen Grid, 20A Charge Coil, 20A Regulator/Rectifier
Yes 98 lbs. $1,341
V-TWIN SERIES
TORO DINGOSold in MN, ND, SD and IA
Order Online www.gnedi.com Order Online www.gnedi.com
82
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
GX660RBAF 690cc 1-7/16” StraightOil Pressure Switch, Manual Throttle, Manual Choke, Standard Air Cleaner, Control Box, 20 Amp Chg. Coil, 20 Amp Regulator Rectifier
No 102 lbs. $1,503
GX660RBDW 690cc 1-7/16” StraightRemote (Wire) Throttle Control, Remote (Wire) Choke, 17A Charge Coil, Standard Air Cleaner, Standard Fan Cover with Protector
No 102 lbs. $1,428
GX660RTAF 690cc 3.78 x 1” dia.Manual Throttle Control, Manual Choke, Standard Air Cleaner, Control Box, 20 Amp Chg. Coil, 20 Amp Regulator Rectifier
No 99 lbs. $1,503
GX660RTDW 690cc 3.78 x 1” dia.Remote (Wire) Throttle Control, Remote (Wire) Choke, Standard Air Cleaner, 20 Amp Chg. Coil, 20 Amp Regulator Rectifier
No 98 lbs. $1,430
GX660RTXA2 690cc 3.78 x 1” dia.Manual Throttle, Manual Choke, 17A Charge Coil, Control Box, Donaldson Air Cleaner, Standard Fan Cover with Protector, Oil Alert
Yes 98 lbs. $1,518
GX690RBAF 690cc 1-7/16” StraightOil Pressure Switch, Manual Throttle, Manual Choke, Standard Air Cleaner, Control Box, 20 Amp Chg. Coil, 20 Amp Regulator Rectifier
No 99 lbs. $1,608
GX690RTAF 690cc 2.76 x 1-1/8” dia.Manual Throttle Control, Manual Choke, Standard Air Cleaner, Control Box, 20 Amp Chg. Coil, 20 Amp Regulator Rectifier
No 102 lbs. $1,608
GX690RTDW 690cc 2.76 x 1-1/8” dia.Remote (Wire) Throttle Control, Remote (Wire) Choke, Standard Air Cleaner, 20 Amp Chg. Coil, 20 Amp Regulator Rectifier
No 102 lbs. $1,535
GX690RVXE2 690cc Tapered(V - Type)
Manual Throttle Control, Manual Choke, 17A Charge Coil, Control Box, Standard Fan Cover with Protector 102 lbs.
GX6
60G
X690
Horizontal Shaft V-Twin Series Twin Cylinder Overhead Valve Engines • 4-stroke. • Electric start.• Automotive, spin-on oil filter. • 2 barrel, fuel cut solenoid, inner vent carburetor. • Digital CDI with variable ignition timing system.
V-TWIN SERIES
GX660/GX690 Common ApplicationsPressure Washers, Stump Grinders, Commercial Turf Equipment, Vacuum Systems, Chippers, Grain Augers
HO
NDa E
NG
INES
New Features:Higher horsepower, improved adaptability, greater compactness, convenient controls, greater fuel economy
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
HONDa ENGINESSold in MN, ND and SD
Order Online www.gnedi.com Order Online www.gnedi.com
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
GXV SeriesVertical Shaft, 4-Stroke Overhead Valve Engines• Single cylinder, commercial-duty engines.
GXV160Common ApplicationsLawnmowers, Commercial Turf Equipment
GXV340Common ApplicationsLawn Tractors, Riding Mowers, Blowers, Vacs, Riding Sweepers, Commercial Turf Equipment
GXV390Common ApplicationsLawnmowers, Lawn Tractors, Riding Mowers, Leaf Blowers, Vacs, Chipper/Shredders, Commercial Turf
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICE
GXV160UH2A12 160cc 3-5/32 x 7/8” 1” tapped 7/8” 24 UNF Flywheel Brake No 40 lbs. $381
† GXV160UH2N12 160cc 3-5/32 x 7/8” 1” tapped 3/8” 24 UNF Standard No 35 lbs. $381
GXV160UH2N1AH 160cc 3-5/32 x 7/8” 1” tapped 3/8” 24 UNF Heavy Flywheel No 35 lbs. $376
GXV340UT2DE33 340cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF 12 Volt Electric Start w/o Fuel Tank No 78 lbs. $850
GXV340UT2DET3 340cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF 12 Volt Electric Start w/Oil Filter & Fuel Tank No 78 lbs. $850
† GXV340T2DP23 340cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF Propane Recoil Start w/o Fuel Tank Yes 78 lbs. $858
† GXV390RT1DA23 390cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF Standard w/Oil Filter; w/o Fuel Tank Yes 73 lbs. $738
† GXV390RT1DA33 390cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF Standard, Recoil Start w/o Fuel Tank Yes 73 lbs. $722
GXV390UT1DE33 390cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF 12 Volt Electric Start w/o Fuel Tank No 79 lbs. $862
† GXV390UT1DET3 390cc 3-5/32 x 1” dia. tapped 7/16” 20 UNF 12 Volt Electric Start w/Oil Filter & Fuel Tank No 79 lbs. $880
GXV160
GXV340
GXV390
How to Measure Horizontal Engine Shaft How to Measure Vertical Engine Shaft
A
Measure B for Shaft Length
A is incorrect. It is important to measure from the bottom of the mounting flange and not from the bottom of the oil pan.
B
AMeasure A for Shaft Length
83
HO
NDa EN
GIN
ES
GXV SERIES
MEaSUREING ENGINE SHaFTS
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
HONDa ENGINESSold in MN, ND and SD
84
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
HO
NDa E
NG
INES
HONDa ENGINESSold in MN, ND and SD
GC Series Horizontal Shaft Overhead Cam Engines• GC Series utilize the world’s first internal timing belt.• 4-stroke, horizontal shaft configuration. • Lightweight & fuel efficient. • Residential duty.• Remarkably quiet. GC160
Common ApplicationsFun-Karts, Pressure Washers, Reel Mowers, Generators, Water Pumps, Tillers, Edgers, Blowers, Vacs, Air Compressors, Chippers/Shredders, Log Splitters
GC190Common ApplicationsFun-Karts, Pressure Washers, Reel Mowers, Generators, Water Pumps, Tillers, Edgers, Blowers, Vacs, Air Compressors, Chippers/Shredders, Log Splitters
GCV Series Vertical Shaft Overhead Cam Engines• GC Series utilize the world’s first internal timing belt.• 4-stroke, vertical shaft configuration. • Lightweight & fuel efficient. • Residential duty.• Remarkably quiet.
GCV160Common ApplicationsLawnmowers, Chipper Vacs, Log Splitters, Pressure Washers
GCV190Common ApplicationsLawnmowers, Chipper Vacs, Log Splitters, Pressure Washers
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICE
GCV160LAOA1A-BLK 160cc N1-Type 3-5/32 x 7/8” dia. 24 UNF Flywheel Brake, Std. Throttle No 25 lbs. $204
GCV160N1AF 160cc N1-Type 3-5/32 x 7/8” dia. 24 UNF Fixed Throttle/Custom Spec. No 25 lbs. $218
† GCV160LAN5AF 160cc N5-Type 3-5/32 x 7/8” dia. 24 UNF Fixed Throttle/Custom Spec. No 25 lbs. $199
GC1
V60
GCV
190 Item Number Displacement PTO Specifications Variation Oil
Alert™ Wt. RETAILPRICE
GCV190LAS3A-BLK 190cc N3-Type 3-5/32 x 25 mm dia. 3/8” 24 UNF Flywheel Brake, Fixed Throttle, Custom Spec. No 29 lbs. $223
† GCV190LAN5AF 190cc N5-Type 1.13 x .785” dia. 24 UNF Fixed Throttle/Custom Spec. No 29 lbs. $236
Item Number Displacement PTO Specifications Variation Oil Alert™ Weight RETAIL
PRICE
GC160LAQHA 160cc 2.44 x .75” dia. Manual Throttle No 25 lbs. $218
GC160LAQHA1 160cc 2.44 x .75” dia. Remote Throttle No 25 lbs. $231
† GC160LAQHA2 160cc 2.44 x .75” dia. Lever Throttle No 25 lbs. $240
GC160LAQBC 160cc 2.44 x .75” dia. Lever Throttle No 25 lbs. $235
GC160AQHAF 160cc 2.44 x .75” dia. Fixed Throttle No 25 lbs. $214
† GC160LAVHA 160cc 2.83 x .75” dia. tapered 2.25”/ft. Standard No 25 lbs. $253
GC160LAVXA 160cc 2.83 x .75” dia. tapered 2.25”/ft. Standard Yes 25 lbs. $284
GC1
60G
C190 Item Number Displacement PTO Specifications Variation Oil
Alert™ Weight RETAILPRICE
GC190LAQHAF 190cc 2.44 x .75” dia. tapered Fixed Throttle No 29 lbs. $245
Gc/GcV SERIES
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
85
GSV190Common ApplicationsLawnmowers, Generators, Chipper Shredders, Pressure Washers, Tillers
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICE
† GSV190LAS3A 190cc 3-5/32 x 25 mm Flywheel Brake No 28.7 lbs. $289
GSV190LAN1L 190cc 3-1/8 x 7/8” tapped x 3/8” 24 UNF Adjustable Throttle No 28.7 lbs. $270
GSV190
GSV190 Series Overhead Valve, Vertical Shaft Premium Residential Engines • 4-stroke.• Cast iron cylinder sleeve.• Premium residential to light-duty commercial grade.• The perfect balance of price and performance.• Easy starting, fuel efficient.• Dual element air cleaner.• EPA/CARB compliant.
Mini-4 Series Mini Four Stroke Engines• The world’s first 360°-inclinable 4-stroke engine. • OHC engine reduces weight, noise, improves start ability and reduces oil consumption. • Runs on regular gas (no mixing gas and oil).• The internal timing belt is maintenance free. • Powerful, easy starting and fuel efficient.• Quiet-pleasing “low” tone.• EPA/CARB compliant.
GX35Common ApplicationsString Trimmers, Brush Cutters, Backpack Blowers, Mini Tillers, Water Pumps, Generators, Cement Screeds, Hobbyist Applications
GX25Common ApplicationsString Trimmers, Brush Cutters, Backpack Blowers, Mini Tillers, Water Pumps, Generators, Cement Screeds, Hobbyist Applications
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICE
† GX25NTS3 25cc @ 7,000 RPM Clutch-Ready Horizontal Fuel Tank No 7.5 lbs. $209
GX25NTT3 25cc @ 7,000 RPM Clutch-Ready Vertical Fuel Tank No 7.5 lbs. $209
GX35NTS3 35cc @ 7,000 RPM Clutch-Ready Horizontal Fuel Tank No 8 lbs. $235
GX35NTT3 35cc @ 7,000 RPM Clutch-Ready Vertical Fuel Tank No 8 lbs. $235
GXH50Common ApplicationsGenerators, Pumps, Tillers, Small Construction Equipment
GX25
GX35
GXH
50
Item Number Displacement PTO Specifications Variation Oil Alert™ Wt. RETAIL
PRICE
GXH50UQXA 50cc @ 7,000 RPM 5/8” x 1.25” Standard No 12 lbs. $405
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
HO
NDa EN
GIN
ESHONDa ENGINES
Sold in MN, ND and SD
Gc/GcV SERIES
MINI 4-STROKE SERIES
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
TORO DINGOSold in MN, ND, SD and IA
86
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
HO
NDa E
NG
INES
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
V-Twin Engine MufflersItem Number Description Color Fits Engine Model(s): RETAIL
PRICE
VHRM5 Right Discharge Muffler - Oil Filter Side Black GX610/GX620/GX670 $145
VHLM5 Left Discharge Muffler - Electric Start Side Black GX610/GX620/GX670 $145
VHSM3* Side Mount Muffler Black GX610/GX620 $135
VHLM6 Left Discharge Muffler - Electric Start Side Black GX630/GX660/GX690 $145
VHRM6 Right Discharge Muffler - Oil Filter Side Black GX630/GX660/GX690 $145
VHSM6* Side Mount Muffler Black GX630 $145
MUF-0319-KIT.SIL Side Mount Muffler Silver GX610/GX620/GX670 $138
MUF-0423.SIL Right Discharge Muffler w/Heat Shield Black GX610/GX620/GX670 $119
MUF-0424.SIL Left Discharge Muffler w/Heat Shield Black GX610/GX620/GX670 $119
MUF-0497-KIT.SIL Right Discharge Muffler - Oil Filter Side Silver GX630/GX660/GX690 $150
MUF-0497R-KIT.SIL Left Discharge Muffler - Electric Start Side Silver GX630/GX660/GX690 $150
MUF-0560.SIL Right Discharge Muffler w/Heat Shield - Oil Filter Side Black GX630/GX660/GX690 $129
MUF-0560R.SIL Left Discharge Muffler w/Heat Shield - Electric Start Side Black GX630/GX660/GX690 $129
MUF-0526-KIT.SIL Shoulder Mount Muffler w/Heat Shield Silver GX630/GX660/GX690 $140
MUF-0508.SIL Top Mount Muffler w/ Heat Shield - Oil Filter Side Silver GX630/GX660/GX690 $150
MUF-0508R.SIL Top Mount Muffler w/ Heat Shield - Electric Start Side Silver GX630/GX660/GX690 $150
CARB Compliant Fuel Tank Kits • CARB and EPA Approved Tanks• Low evaporative emission solutions to meet new regulations.• Available in 4 sizes.• Kit includes tank, low perm hose, carbon canister and hardware.
Item Number Tank Size Dimensions RETAIL
PRICE
070753AE.FLA 2.5 Gal. 7.75” H X 12.75” W X 7.86” D $299
070483BE.FLA 5 Gal. 10.25” H X 15” W X 8.67” D $299
† 070752AE.FLA 6 Gal. 12.23” H X 15” W X 8.67” D $299
070745AE.FLA 8 Gal. 10.75” H X 21.50” W X 10” D $299
ENGINE accESSORIES
Side Mount MufflerVHSM3 shown on GX620
High Mount MufflerVHLM6 shown on GX660
NEW Kit Includes:CARB Compliant Fuel Tank
Low Perm HoseCarbon Canisterand Hardware
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount 87
HO
NDa EN
GIN
ES
Item Number Description Application RETAIL PRICE
A HONDAKIT1 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions GC135/160/190 & GCV 135/160/190 $25
B HONDAKIT2 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions GX110 & GX120 with standard air filter $25
A HONDAKIT3 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions
GX110 & GX120 with Cyclone air filter and GX140, GX160 & GX200 with standard or Cyclone air filter $25
A HONDAKIT4 Includes air filter, spark plug, 1-qt. engine oil, STA-BIL® fuel stabilizer and instructions GX240 & GX270 with standard air filter. $25
A HONDAKIT5 Includes air filter, spark plug, 2-qts. engine oil, STA-BIL® fuel stabilizer and instructions
GX240 & GX270 with Cyclone air filter and GX340 & GX390 with standard or Cyclone air filter $30
C HONDAKIT6Includes prefilter, air filter, 2 spark plugs, 2-qts. engine oil, oil filter, fuel filter, STA-BIL® fuel stabi-lizer and instructions
GX & GV 610, 620 with standard air filter and serial number starting with a 2 and GX & GXV670 with standard air filter and serial number starting with a 1.
$70
Honda Engine Maintenance Kits• Kits include air filters, fuel stabilizer, oil and more, all pre-selected by engine type for your convenience.• An excellent retail kit for Honda Engine and Honda Power Equipment customers.
New Engine Warranty From Honda• Honda makes the best engine in the market and now they are backing it up with a 3 Year Limited Warranty (Available on most models) effective January 1st, 2009.
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
ModelPrevious Length Current Length
Non-Commercial/Non-Rental
Commercial/Rental
Non-Commercial/Non-Rental
Commercial/Rental
GX22, GX25, GX31, GX35, GX50 12 Months 12 Months 24 Months 12 Months
GX 24 Months 24 Months 36 Months 36 Months
iGX 24 Months 24 Months 36 Months 36 Months
GC/GCV 24 Months 3 Months 24 Months 3 Months
GS 24 Months 12 Months 24 Months 12 Months
GXV140/GXV160 24 Months 24 Months 24 Months 24 Months
GXV340-390 24 Months 24 Months 36 Months 36 Months
All V-Twin 24 Months 24 Months 36 Months 36 Months
A CB
TORO DINGOSold in MN, ND, SD and IA
88
HO
NDa E
NG
INES
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
Item Number Function Description Wt. RETAIL PRICE
SFT806-0222 Tachometer Tachometer to 7,500 RPM, Plus a Totalizing Hour Meter to 9,999.9 Hours 1 lb. $70
806-100-1032Tachometer, Hour Meter,and Maintenance Meter with Flash Alert™
Fully Automatic; Upon Engine Start, Meter Will Show RPMs; At Engine Shutdown, Meter Displays Total Accumulated Running Time; Flash Alerts for “LUBE” and “CHG OIL” at 25 Hour Intervals, with a Total Flash Time of Two Hours; Suitable for all Single Cylinder and Most Twin Cylinder, 4 Cycle, Gasoline Engines
1 lb. $40
810LA14-1 LED Volt Meter
12V DC Volt Meter; Displays Equipment’s DC Voltage Level Using a 10 Segment LED Bar Graph Display; Each Bar Represents One Volt and Corresponds to the Printed Voltage on the Meter Face; Termination: (2) 0.187 Faston Tabs
1 lb. $35
SFT806-100-1032
810LA14-1
Honda Engine Service Schools• GNE offers hands-on engine service schools each spring, open to Honda Engine dealers and OEM tech support staff members.
• After attending the Honda Engine Service School, technicians will have acquired knowledge that concentrates on the overall Honda engine product line; characteristics, benefits and service procedures with hands-on engine exercises that will enhance productivity and customer service.
• This is a great opportunity to keep current with the latest small engine technology, learn helpful tips, and network with peers.
• Service clinic dates and locations for 2011 are posted on our website. Log on to www.gnedi.com and click the “Service Schools” icon.
Item Number Fits Engine Model(s) Drain Port Size
I.D. Hose Size
RETAIL PRICE
HON1010 Honda: GX100, GX120, GX160, GX200; Kohler: CS4, CS6 10mm 1/4” $18
HON1012 Honda: GX240, GX270, GX340, GX360, GX390, GC160; Kohler: CS8.5, CS10, CS12 12mm 1/4” $18
HON1014 Honda: V-Twin Engines GX610, GX620, GX670; Kawasaki: 3.7 14mm 1/4” $18
HON1414 Honda: V-Twin Engines GX610, GX620, GX670; Kawasaki: 3.7 14mm 3/8” $18
HON1420 Honda: Vertical Shaft V-Twin Engines GXV610/620/670, GX/GXV630/660/690, IGX440 20mm 3/8” $18
HON1012-22 Extended Hose, Honda: GX240/270, GX340/360/390, GC160; Kohler: CS8.5/10/12 12mm 1/4” $21
HON1414-22 Extended Hose, Honda: V-Twin Engines GX610, GX620, GX670; Kawasaki: 3.7 14mm 1/4” $21
STAN1025 Briggs & Stratton/Tecumseh 1/4” NPT 1/4” $18
STAN1438 Briggs & Stratton/Tecumseh; Kohler: Command & OHC 16 HP & 18 HP 3/8” NPT 3/8” $18
Drainzit Oil Changing AidThe End to All Messy Oil Changes• May be used on nearly any small-engine driven equipment including generators, pressure washers, pumps/sprayers, compressors, go--karts, lawnmowers & truck-mounted engines.• Easy to install and simple to use. • Custom-designed to be installed without dismounting or modifying the engine.• Fittings convert metric to SAE wrench sizes.• Standard overall length: 14”.• Brass fittings for quality & service.• Flexible hose allows for positioning according to the application at hand.• Temperature range: -15º to 150º F.• 1 lbs. ship weight.
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
SenDEC MetersMinimal Cost, Maximum Value
Order Online www.gnedi.com Order Online www.gnedi.comHONDa ENGINESSold in MN, ND and SD
HONDa ENGINESSold in MN, ND and SD
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount 89
HO
NDa EN
GIN
ES
The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and measured in accordance with SAE J1349 at 3600 rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. Specifications subject to change without notice. For optimum performance and safety, please read the owner’s manual before operating your Honda Power Equipment. ©2011 American Honda Motor Co. Inc.
Special Dealer Discounts • While Quantities Last • Buy in Quantity for Best Pricing
Model: GX120U1QXC9
Honda 120cc EngineGX Series - Horizontal• Cyclone Air Cleaner• 3/4” Shaft• Oil Alert
Model: GCV160AS3A
Honda 160cc EngineGCV Series - Vertical• 3/4” Shaft• Fixed Throttle• Optional Manual Throttle Kit Avail.
Honda 670cc EngineGXV Series - Vertical• Lawnmower Replacement• 1 1/8” Shaft
Model: GXV670TAFModel: GXV530EXA2
Honda 530cc EngineGXV Series - Vertical• Hustler Spec Engine• Vertical Shaft • Lawnmower Replacement
Honda 340cc EngineGX Series - Horizontal• OHV• Oil Alert• 18 Amp Charge
Model: GX340U1QNR2-BLK
Honda 340cc EngineGX Series - Horizontal• 2:1 Gear Reduction• Oil Alert• 1” Shaft
Model: GX340U1LX2Honda 390cc EngineGXV Series - Vertical• Commercial Turf Eng.• 10 Amp Charge • Toro Spec
Model: GXV390UT1DETR
Honda 620cc EngineGXV Series - Vertical• Lawnmower Replacement• 12V Electric Starter
Model: GXV620U1QAF-BLK
Honda 135cc EngineGC Series - Vertical• Lawnmower Replacement• 7/8” Shaft
Model: GCV135A2A
Honda 160cc EngineGC Series - Horizontal• 3/4” Shaft• Fixed Throttle• Optional Manual Throttle Kit Avail.
Model: GC160AQHAF
SPEcIaL ENGINE BUYS
RETaIL PRIcE
$199RETaIL PRIcE
$214
RETaIL PRIcE
$194RETaIL PRIcE
$420
RETaIL PRIcE
$927RETaIL PRIcE
$816
RETaIL PRIcE
$813RETaIL PRIcE
$1355
RETaIL PRIcE
$1588RETaIL PRIcE
$1039
90
GRacOSold in MN, ND, SD, WI and IA
DEALERS SAVE UP TO 35%!
90
Item Number Motor GPM Gun
515 Reverse-A-Clean
IV SwitchTip
DuraFlex Airless Hose
SprayableCoatings Applications / Uses RETAIL
PRICE
XR7.GRA 3/4 HP .31 SG2 Metal Spray Gun 0.17 Max. Tip Size 1/4” x 50 ft Light to Medium
Remodeler, Maintenance Painter, General Contractor $400
190ES.GRA 7/8 HP .38 SG Pro Metal Spray Gun 0.19 Max. Tip Size 1/4” x 50 ft Light to Heavy
Small Painting Contractor,Pro Painting Contractor $600
Graco Airless SprayersFast, Uniform Coverage• Featuring airless spray technology which saves valuable time versus other methods.• Easily apply paint to a variety of surfaces - from rough to smooth - with even application and professional results.• Spray most common coatings or use an optional pressure roller attachment for interiors where backrolling is necessary.• Optional accessories expand productivity and save time.• Limited Availability. Units sold through GNE are former retail display models. All units carry a full manufacturer’s warranty.
XR7.GRA 190ES.GRA
Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
Graco Accessories
Item Number Description RETAIL
PRICE† 243926 SG1-EF Easy Filter Spray Gun $124
† 243011 SG2 Metal Spray Gun $159
243012 SG3 Deluxe Metal Spray Gun $189
† 255109 SG Pro Premium Metal Spray Gun $195
244512 Pressure Roller Kit $97
243063 Roller Cover: 1/2” Nap $11
243064 Roller Cover: 3/4” Nap $11
243065 Roller Cover: 1.25” Nap $11
243104 Pump Armor Fluid $8
244515 Straight Hose Swivel $30
247338 DuraFlex Airless Paint Hose: 4’ X 3/16” $21
247339 DuraFlex Airless Paint Hose: 25’ X 1/4” $41
247340 DuraFlex Airless Paint Hose: 50’ X 1/4” $57
243025 DuraFlex Airless Paint Connector $3.40
243042 20” Standard Tip Extension $41
243043 30” Standard Tip Extension $46
† 243052 40” Heavy-Duty Tip Extension $57
Item Number Description RETAIL
PRICE
221311 Reverse-A-Clean IV Spray Tip: .011 Hole Size, 6”-8” Fan Width, .12 Flow Rate $38
221313 Reverse-A-Clean IV Spray Tip: .013 Hole Size, 6”-8” Fan Width, .18 Flow Rate $38
221411 Reverse-A-Clean IV Spray Tip: .011 Hole Size, 8”-10” Fan Width, .12 Flow Rate $38
221413 Reverse-A-Clean IV Spray Tip: .013 Hole Size, 8”-10” Fan Width, .18 Flow Rate $38
221415 Reverse-A-Clean IV Spray Tip: .015 Hole Size, 8”-10” Fan Width, .24 Flow Rate $38
221417 Reverse-A-Clean IV Spray Tip: .017 Hole Size, 8”-10” Fan Width, .31 Flow Rate $38
221515 Reverse-A-Clean IV Spray Tip: .015 Hole Size, 10”-12” Fan Width, .24 Flow Rate $38
221517 Reverse-A-Clean IV Spray Tip: .017 Hole Size, 10”-12” Fan Width, .31 Flow Rate $38
221519 Reverse-A-Clean IV Spray Tip: .019 Hole Size, 10”-12” Fan Width, .38 Flow Rate $38
221619 Reverse-A-Clean IV Spray Tip: .019 Hole Size, 10”-12” Fan Width, .38 Flow Rate $38
LASER
91 Great Northern Equipment Distributing, Inc. | 800-822-0295 | www.gnedi.com Wholesale Supplier to Dealers and Rental Centers | Call For Dealer Discount
LASERSold in MN, ND, SD, WI and IA
OEM Part Number
Laser Number Manufacturer Description LASER
RETAIL95-5574 93009 Lawn Boy Air Filter - Fits Duraforce Engines $2.54
35500 93010 Tecumseh Air Filter - Fits TV90, TVS100, TVS105, TVS115, OVRM40, OVRM50, OVRM60, OVRM65, OVRM105, OVRM120 & ECV100 (3.5HP-5HP) Engines $10.03
392642 93015 Briggs & StrattonAir Filter - Fits 290400, 290700, 294700, 303400, 303700, 350400, 350700, 400400, 401400, 402400, 404400, 422400 Horizontal (L-Head) twin, Horizontal and Vertical V-Twin OHV Vanguard. Uses foam wrap 93105
$6.37
27987 93017 Briggs & Stratton Air Filter - Fits 60000-80000 Series, 100200, 111200, 130200, 131200, 140200 and fits many (2, 3, 4 & 5HP) Horizontal engines $3.84
270579 93019 Briggs & Stratton Air Filter - Fits 3, 3.5, 4HP Automatic Choke Vertical, 82500-82997, 92500, 92900 & 93500 Series $3.76
OEM Part Number
Laser Number Manufacturer Description LASER
RETAIL492932 93097 Briggs & Stratton Oil Filter (25 Micron) - Fits Vanguard 5-14HP Engines $3.67
491056 93098 Briggs & Stratton Oil Filter (25 Micron) - Fits Vanguard 5-14HP Engines (tall version) O.D.: 3”, Height: 3-3/8”, Thread: 3/4” $3.67
107423 93100 Briggs & Stratton Oil Filter (25 Micron) - Fits 70185, 499532, 692513. O.D.: 2-11/16”, Height: 2-7/8”, Thread: 3/4” $3.67
12 050 01 93123 Kohler Oil Filter (25 Micron) - Fits CH18-CH25, CV18-CV25 Engines O.D.: 3”, Height: 2-5/16”, Thread: 3/4” $3.67
OEM Part Number
Laser Number Manufacturer Description LASER
RETAIL
33280A 94363 Tecumseh Muffler - Fits HM70, HM80, HM100, VM70, VM80, VM100, H80, HHM80, V80 (7, 8, 10HP) Engines $13.32
32401 94362 Tecumseh Muffler - Fits HH40, HH50, H50, H60, HH60, H70, HH70 Series (7HP) $11.39
393010 94360 Briggs & Stratton Muffler - 9, 9B, 9F, 9R, 100200, 130200, 131200, (5HP Horizontal), 170499, 170700, 171700, 171706 (7HP Horizontal), 190400, 190799, 195400 Series (8HP Horizontal) Pipe: 3/4” $7.87
491413 94075 Briggs & Stratton Muffler - Fits 220400, 220700, 221400, 252700, 255400, 282700 (10 & 12.5HP) Engines. Special noise reduced design. 1” I.D. inlet. Gasket & Hardware Incl. $23.56
498984 94071 Briggs & Stratton Muffler - Fits 252762 Series / 12HP Engines. Fits Sears, Exmark, Bunton & Toro $37.62
OEM Part Number
Laser Number Manufacturer Description LASER
RETAIL145106 91009 Craftsman 20” Lawn Mower Blade - Fits Craftsman 20” Walk Behind Mowers $9.94942-0741 91012 MTD 21” Mulching Lawn Mower Blade - Fits MTD Deck 1995 & Older $8.47942-0742 91013 MTD 22” Mulching Lawn Mower Blade - Fits MTD Deck 1995 & Older. Fits 22” Walk Behind $11.4948110 91019 Scag 16-1/2” Lawn Mower Blade - Need 2 for 38” Cut and 3 for 48” $10.28942-0610STD 91030 MTD 19-5/16” Lawn Mower Blade - Fits Deep Deck 1992 and After. (need 2) for 38” Cut $18.71
Lawn Mower Blades
Mufflers
Oil Filters
Air Filters
Professional Quality Replacement Parts for Chainsaws, Lawnmowers, Small Engines, Snowblowers and Trimmers
AriensBriggsCase
Cub Cadet
Dixie Chopper
DixonExmark
FerrisGravely
HusqvarnaJohn Deere
KawasakiKohler
LawnboyMTD
ScagSnapper
SthilAND MORE!
Compare and Save up to 50%Call or log onto www.gnedi.com for
your Dealer Price Today!
Over 5,000 different aftermarket parts available. Click on our easy
Power Link electronic cross reference available at www.gnedi.com!
Sample of Top Selling Laser Parts - Many More Part Categories Available from Laser
Aftermarket Parts Brands Available
Mailing and Shipping Address20195 South Diamond Lake Road, Suite 100Rogers, MN 55374E-mail AddressesEngine Sales: [email protected] Sales: [email protected] Sales: [email protected]
Telephone NumbersToll-Free: 800-822-0295Twin Cities Metro Area: 763-428-2237Fax NumbersMain Office: 763-428-4821Parts Orders, Toll-Free: 866-779-9963 Parts Orders, TC Metro Area: 763-428-2094
Log on to GNE’s Power Link Dealer Portal for Online Ordering, Parts Lookup & More.
powerlink.gnedi.comItem No. CATS11.GNE Catalog Volume: 2900
Pg. 78-89 Pg. 90Pg. 60-62 Pg. 70-74 Pg. 75Pg. 67-69
Pg. 6-11 Pg. 42-45Pg. 12-24 Pg. 25-40 Pg. 54-57Pg. 50-53 Pg. 58-59Pg. 46-49
Pg. 63-66 Pg. 76-77
Order Source Code: CAT11011
Check out pages 12-24 to see our offering of Implement/Ag Attachments from Paladin!
Stump Grinders Chipper/Mulchers Brush Chippers
NEW AND
IMPROVED MODELS
Check Out Pa
ges 76-77