Get 8va Edicion

Cat Ground Engaging Tools

Parts Sales Kit

PECP3001-07 www.cat.com Printed in USA 2005 Caterpillar All Rights Reserved

CatGround Engaging Tools Parts Sales Kit

8th Edition

Caterpillar. The difference counts.

CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

8th Edition

1Cat Ground Engaging Tools

Ground Engaging ToolsSection

No.

Wear Protection 1

Bulldozers / Compactors 2

Excavators 3

5000 Series Shovels 4

Hydraulic Hammers / Demolition Tools / Rock Drill Tools 5

Loaders / Backhoe Loaders / Integrated Toolcarriers 6

Skid Steer Loader 7

Underground Mining 8

Paving Products 9

Motor Graders 10

Rippers / Scarifiers 11

Scrapers 12

GET Service Tools 13

GET Made As Ordered Program 14

Appendix / Reference Materials 15

For updates to this book, please visit our website on Infocast: https://nacd.cat.com/infocast/frames/prodsupp/get/

2Introduction

This Ground Engaging Tools Parts Sales Kit (GET) is designed to providedealer salespeople (field and instore) with part numbers and product infor-mation as well as features and benefits for selected parts and service prod-ucts. It is a quick reference tool which lists part numbers and applicationsfor items that are: new, competitive and high in sales volume and salespotential.

The GET PSK should not be used as a substitute for Parts Books,Numerical Parts Record, Parts Pricing Medium or any other formalreference publication. All part numbers, specifications and applicationdata published in the GET PSK are subject to change without notice. Anyinformation taken from this publication for use in preparing a PartsSales Order or Price Quotation should always be verified against theNumerical Parts Record in accordance with the Management Partsgramentitled The Numerical Parts Record.

The tab index enables users to quickly locate various sections in the GETPSK. Users are urged to use the GET PSK consistently to help ensure closefamiliarity with the vast amount of part numbers and product information.

Ground Engaging Tools

This book supports the Caterpillar Ground Engaging Tools for loader buck-ets, excavator buckets, rippers, bulldozer blades and scraper bowls on eithercompetitive or Caterpillar machines. The function of the program is toincrease customer satisfaction and GET component sales by making avail-able a consistent, high-quality GET product line for all machines.

The Ground Engaging Tools PSK should be useful in various depart-ments, for example:

Parts and Service Salespeople can use it to determine convertibility andestablish a quote.

The service/welding shop will also find many uses for this guide.

Used equipment salesperson can convert machines on the lot toCaterpillar GET, increasing their value.

NOTE: For a detailed list of serial number equivalent information, see SerialNumber Index, Form No. SEBF9451. This Equivalent Serial NumberGuide covers Caterpillar machines from 1955.

1-1

Wear Protection Section ContentsPage

Weld-On Half-Arrow Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2Weld-On Heel Shrouds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2White Iron Wear Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3Mechanically Attached Wear Plate System (MAWPS) . . . . . . . . . . . . . . . . . . . . .1-4MAWPS Remove and Install Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7Wear Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8

Wear Protection

WELD-ON HALF-ARROW EDGES / WELD-ON HEEL SHROUDS

1-2

Wear Protection

WELD-ON HALF-ARROW EDGES

Weld-on half-arrow edges protect the bucket structure by adding more wearmaterial to the base edge, and they will fit other brand buckets.

The weld-on half-arrow edges can be used to customize loader buckets. Forexample, they could be used as sidecutters on bucket side bars to improve pene-tration, or welded between bucket teeth to reduce scalloping. Before weldinghalf-arrow sections between bucket teeth, be sure to check for tip and pin holeclearance. This is a concern primarily when using bottom strap adapters.

Options W T H B Overall Length

Part No. in. mm in. mm in. mm in. mm feet mm134-1774 4 101 0.43 11 0.40 10 0.14 3.5 8 2438134-1776 6 151 0.63 16 0.60 16 0.22 5.5 8 24388J-8141 8 203 0.75 19 0.50 13 0.16 4.0 12 36588J-8176 10 254 1.10 28 1.10 29 0.44 11 12 36586Y-2107 10 254 1.60 40 1.20 30 1.00 25 12 3658109-2696 10 254 1.60 40 1.20 30 1.00 25 18 5486132-1013 11.6 295 1.77 45 1.34 34 0.47 12 3.3 1000

WELD-ON HEEL SHROUDS

Weld-on heel shrouds protect the lower outside corner of all types of Caterpillarand other brand buckets. Protection is given to the bottom and the side of thebucket with extra wear material concentrated in the corner where its needed most.Straight and curved heel shrouds are available in two different sizes to best matchbucket contour and size, and abrasiveness of the application. The inside corner isrelieved to eliminate interference with the bucket structure. Shrouds need not beplaced tightly together. They can be spaced apart and still provide full protectiondue to shadowing. Weld-on heel shrouds are especially applicable for LHEX andunderground LHD buckets.

For high wear applications Caterpillars Mechanically Attached Wear Plate System(MAWPS) should be considered due to their quick change design. However, formoderate wear applications and sites especially concerned about mechanicallyfastened parts these weld-on heel shrouds are an excellent option to consider.

Weight A B C D E F G H Rlb in in in in in in in in in

Part No. Type (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)157-1019 straight 68.4 9.8 7.9 10.6 2.0 1.8 1.2 7.9

(31.0) (250) (200) (270) (50) (45) (30) (200)157-1027 curved 63.1 9.8 7.9 7.6 10.6 2.0 1.8 1.2 7.9 31.5

(28.6) (250) (200) (193) (270) (50) (45) (30) (200) (800)138-6529 straight 30.4 6.9 5.9 8.1 1.6 1.4 1.0 5.9

(13.8) (175) (150) (205) (40) (35) (25) (150)138-6551 curved 29.5 6.9 5.9 5.4 8.1 1.6 1.4 1.0 5.9 23.6

(13.4) (175) (150) (136) (205) (40) (35) (25) (150) (600)

W

TH

B

A

B

A

C

R

1-3

WHITE IRON WEAR BLOCKWear Protection

WHITE IRON WEAR BLOCK

The high chrome alloy white iron is brazed to a mild steel backing plate whichcan be plug-welded with an E7018 3/32" (or similar) stick electrode to a bucket,dozer moldboard, or anywhere quick installation, low cost, abrasion protectionis desired. As with any welding, traditional preheating practices apply, depend-ing upon the location. In addition to quick installation, another advantage of thedesign is that the plug welds and steel base are protected from wear.

This product is designed to add long wear life in highly abrasive applications. Ithas a hardness rating of Rc 60-65 and offers lower cost protection than hard-facing. In addition to its ease of application, it is environmentally neutral,unlike some other wear protection products.

Part Numbers: 137-9699 137-9698 137-9697

Sizes: (inches) 4 x 8 x 1 4.6 x 4.6 x .54 4.6 x 2 x .54(mm) 102 x 205 x 25 117 x 117 x 14 117 x 51 x 14

Weights: (lbs) 7.19 2.79 1.14(kg) 3.27 1.27 0.52

Features: quick installation versatility low cost environmentally neutral hardness Rc 60-65 protected welds and steel base

Applications: Anywhere extra protection is needed for abrasive wear.May not be suitable for higher impact job sites.

137-96994" x 8" x 1"

(102 mm x 205 mm x 25 mm)

137-96984.6" x 4.6" x .54"

(117 mm x 117 mm x 14 mm)137-9697

4.6" x 2" x .54"(117 mm x 51 mm x 14 mm)

MECHANICALLY ATTACHED WEAR PLATE SYSTEM

1-4

Wear Protection

MECHANICALLY ATTACHED WEAR PLATE SYSTEM (MAWPS)The Mechanically Attached Wear Plate System provides a hammerless means of instal-lation and removal. They are capable of protecting wear areas previously unprotectedor protected by weld-on or bolt-on wear plates in a large variety of applications on Catand competitive machines. The Skeletal MAWPS uses the same Series 20 base andretainer as the regular MAWPS, but has a modified skeletal plate that fits on the base.The Skeletal MAWPS wear plate is skeletal in form so it traps material in the plate andbetween the plates.

Features and Benefits Mechanical, hammerless installation. The Mechanically Attached Wear Plate

System consists of a through-hardened DH-2 wear plate which slides onto a weld-onbase plate and is held in place with a patented compression retainer. The SkeletalMAWPS wear plate is skeletal in form so it traps material in the plate and betweenthe plates. With both MAWPS systems, worn wear plates can be quickly replacedusing a common prybar or a MAWPS removal tool, 160-5119, without hammeringor welding. This makes removal and installation quick and easy. Worn wear platescan be quickly replaced using a common prybar without hammering or welding,making removal and installation quick and easy.

Reduced downtime and maintenance. Because the wear plates can be changedquickly, usually in two minutes or less, downtime and maintenance time are reducedcompared to weld-on or bolt-on wear plates.

Extended wearing. The patented compression retainer is positioned low in the baseplate allowing a greater percentage of the wear plate to be worn away before replace-ment. Competitive wear plates house the retainer higher in the wear plate therebyreducing the amount of available wear material. The Cat wear plates more efficientuse of total material lengthens replacement intervals and allows for less additionalbucket weight for comparable protection.

Flexible application. The weld-on base plate can be welded on virtually any flator moderately curved surface. The system is designed to take loads from any direc-tion so the orientation of the wear plate to the direction of the load is inconse-quential. The Mechanically Attached Wear Plate System can easily be used tocustomize a wide variety of wearing surfaces.

DescriptionWear plates are made from Caterpillar DH-2 steel and are through hardened to obtainoptimum strength and wear life. The base plate is made from slightly softer but toughweldable steel to withstand high load forces. The base plate is not subject to wearunder normal conditions since it is entirely covered by the wear plate. The patentedcompression retainer is investment cast from spring steel material and acts as aspacer when located in the holding position. As a system, the Mechanically AttachedWear Plate System will accept loads from any direction and does not require specificorientation as with competitive wear plates. They only require approximately 2 inches(50 mm) of space from adjacent objects on one end to facilitate replacement.ApplicationThe Mechanically Attached Wear Plate System can be installed on virtually anyflat surface or on moderately curved surfaces providing the radius is not extremelysmall. Radius capability is specified in the parts consist chart. Bucket bottoms andsides, dozer push arms, Hydraulic Excavator bucket ski runners and sides, truckbody duck tails, Tiger dozer blades, crusher hoppers are all candidates for wear plateprotection. Long life, ability to customize protection and ease of use promise to makethis unique wear system a popular alternative to bolt-on or weld-on wear plates.

The Skeletal Mechanically Attached Wear Plate System can be installed on virtuallyany flat or moderately curved surfaces of the truck bed. They come in two sizes, stan-dard and heavy duty. Long life, ability to customize protection and ease of usepromise to make this unique wear system a popular alternative to weld-on wearprotection.

MAWPS

SKELETAL MAWPS

1-5

MECHANICALLY ATTACHED WEAR PLATE SYSTEMWear Protection

Wear IndicatorThe wear plate has recessed holes (blind holes) cast into each corner to serve as awear indicator making inspections quick and easy. When the holes become exposedin one or more corners, it is time to change the wear plate. If the wear plate isallowed to wear beyond the wear indicator, damage to base plate may occur.

Parts ConsistMechanically Attached Wear Plate System

Suggested Base Plate Wear Plate Compression RadiusSeries Models (thk) (dimension) Retainer Capability*

20 Series 966, 980, 988, 345B, 138-0020 138-0022 138-0006 7.87 in (200 mm)other similar 0.70 in thick 8.85 in x 7.87 in x 1.38 in minimum

sizes (18 mm) (225 mm x 200 mm x 35 mm)5.35 lb (2.43 kg) 14.15 lb (6.42 kg)

Heavy Duty same same 138-0023 same same8.85 in x 7.87 in x 1.97 in

(225 mm x 200 mm x 50 mm)23.9 lb (10.85 kg)

30 Series 990, 992, 375, 138-0030 138-0032 138-0006 15.75 in (400 mm)5080, other similar 0.86 in thick 10.8 in x 7.87 in x 1.77 in minimum


Heavy Duty same same 138-0033 same same(10.8 in x 7.87 in x 2.36 in)

275 mm x 200 mm x 60 mm32.6 lb (14.8 kg)

40 Series 5110, 5130, 138-0040 138-0042 138-0007 31.50 in (800 mm)other similar 1.14 in thick 10.8 in x 7.87 in x 2.36 in minimum



(275 mm x 200 mm x 75 mm)41.2 lb (18.7 kg)

50 Series 994, 5230, 138-0050 138-0052 138-0007 47.25 in (1200 mm) other similar 1.14 in thick 11.81 in x 9.8 in x 2.95 in minimum



(300 mm x 250 mm x 100 mm)83.15 lb (37.75 kg)

Skeletal Mechanically Attached Wear Plate SystemSuggested Base Plate Wear Plate Compression Radius

Series Models (thk) (dimension) Retainer Capability*Standard Off Highway 138-0020 138-0024 138-0006 7.87 in (200 mm)

Trucks 0.70 in thick 8 in x 12.2 in x 1.38 in(18 mm) (202 mm x 310 mm x 35 mm)

5.35 lb (2.43 kg) 12.9 lb (5.9 kg)Heavy Duty Off Highway 138-0020 138-0025 138-0006 7.87 in (200 mm)

Trucks 0.70 in thick 8.15 in x 12.2 in x 1.77 in(18 mm) (207 mm x 310 mm x 45 mm)

5.35 lb (2.43 kg) 18.3 lb (8.4 kg)* Not recommended for convex radii smaller than those specified in this chart.

MECHANICALLY ATTACHED WEAR PLATE SYSTEM

1-6

Wear Protection

Promotion MaterialCD Rom Training/Sales Presentation: A CD Rom titled Caterpillar Mechani-cally Attached Wear Plate System (PEXT7000) is available through literaturedistribution. This can be used by dealer machine and parts sales people for train-ing or customer sales presentations. The CD Rom is interactive covering an Intro-duction, Features and Benefits, Size Comparison, How To Remove and Installand Questions and Answers. The CD plays for approximately 20 minutes and iscomplete with video, narration and virtual reality features. Remove and installinstructions can be printed and used as a field reference.

Demonstration Kit: A scale model demonstration kit (PEKP8025) is also avail-able through literature distribution. The kit contains a full scale 20 series wearplate, base plate and compression retainer and is enclosed in a carrying case. Thedemonstration kit can be used in conjunction with the CD Rom when makingcustomer presentations.

Video: A six-minute video on Skeletal MAWPS PEVN4817

Datasheet: MAWPS PEHP7074Skeletal MAWPS PEHP9532

WarrantyAs with all Ground Engaging Tools from Caterpillar, the Mechanically AttachedWear Plate System components are warranted against breakage for the normalwear life of the product. Caterpillar will not provide warranty coverage under thebreakage terms of the warranty statement if the wear plates are worn beyond thewear indicators on the wear plate.

Mechanically Attached Wear Plate Competitive Review

Standard Size ComparisonTotal Weight

Wear Material of Assembly % Wear Material of % Throw AwayPart inch mm lbs kg Total Assembly Weight Wear PlateCat Series 20 0.55 14 20.5 9.32 68% 35%Competition 0.31 8 18.2 8.27 44% 50%Cat Series 30 0.70 18 28.5 12.95 63% 32%Competition 0.63 16 46.9 21.32 34% 47%Cat Series 40 1.10 28 41.2 18.70 68% 22%Competition 0.63 16 46.9 21.32 34% 47%Cat Series 50 1.70 43 72.2 32.80 60% 21%Competition 1.38 35 108.6 49.36 32% 31%

Heavy Duty ComparisonTotal Weight

Wear Material of Assembly % Wear Material of % Throw AwayPart inch mm lbs kg Total Assembly Weight Wear PlateCat Series 20 1.14 29 30.8 14.00 94% 20%Competition 0.83 21 24.7 11.20 85% 24%Cat Series 30 1.34 34 39.2 17.81 87% 18%Competition 1.42 36 64.1 29.14 56% 23%Cat Series 40 1.70 43 53.5 24.32 80% 14%Competition 1.38 35 108.6 49.36 32% 23%Cat Series 50 2.68 68 101.8 (6.30 68% 10%Competition 2.40 61 145.6 66.18 42% 18%

1-7

MECHANICALLY ATTACHED WEAR PLATE SYSTEMWear Protection

Remove and Install Instructions1) Locate wear area to be protected and clean free of dirt/paint/debris. Be sure to

leave 2 inches (50 mm) minimum clearance from adjacent objects to allow forwear plate removal and installation.

2) Position the base plate in the desired location and weld the base plate in posi-tion welding at locations A & B as shown in the following illustration.Location C is used only for the 50 series base plate. Make one pass at a time ineach location to avoid excess heat build-up. The base plate will require severalpasses at each location to ensure proper strength is achieved. Use the chart todetermine fillet weld size and number of passes for each series base plate.

Series Fillet Base Plate Weld Size20 Series 0.6 in (15 mm)30 Series 0.6 in (15 mm)40 Series 0.7 in (18 mm)50 Series 0.8 in (20 mm)

3) Position the wear plate over the base plate and slide the wear plate onto the base.4) Install one end of the compression retainer under the resting point.5) Insert installation tool 160-5119 or a small pry bar with an 8 mm (0.31") width point

between the base and wear plate and pry the compression retainer into place. Afterthe retainer compresses and goes over center, it will pop into place and expand.

6) Remove the installation tool and check the compression retainer to assure it is inposition.

Removal1) Clean the compression retainer opening in the wear plate free of packed material.

A pneumatic chipper is the most effective method to clean the packed material. Notall packed material needs to be cleaned away to remove the retainer.

2) Insert the installation tool or a small pry bar in the slotted area of the compres-sion retainer and pry up. The compression retainer will pop up out of the lock-ing position.

3) Remove the retainer and slide the wear plate off the base plate.

NOTE: Compression retainers can be reused if they meet the following criteria:1. 138-0006 no less than 87 mm (3.43") length.

138-0007 no less than 97 mm (3.82") length.2. Retainer is no more than 2 mm (.080") out of flat.3. There is no deformation of the retainer material.

WEAR BARS

Wear bars provide additional blade protection in highly abrasive applica-tions where short liner life has been encountered. Wear bars are designedto be welded on top of a wear surface.

Wear bars come in different lengths to allow a customer to tailor the place-ment of the wear protection while minimizing the amount of throw-awayiron. Part numbers for the various lengths are shown below:

Wear bars are made from DH-2 steel alloy, through-hardened for greaterwear resistance and strength. Core hardness of the bars will be between45-52 Rc (2.7-3.0 BR). If the bars are to be flame cut, the burn zone mustbe preheated to 150-230C. It is also recommended to preheat the bars tothe 150-230C temperature when welding. The bars are to be positioned sothe bevel is next to the surface shown at right.

Length Width ThicknessPart Number in mm in mm in mm

107-3386 96 2438 8 203 1 25107-3387 108 2743 8 203 1 25107-3388 132 3353 8 203 1 25107-3389 144 3658 8 203 1 25107-3390 156 3962 8 203 1 25107-3391 180 4572 8 203 1 256S-4738* 82 2080 6 150 0.63 165G-3897* 36 914 6 150 0.63 165G-3488* 24 610 6 150 0.63 165G-4642* 98.4 2500 7.5 191 0.75 195G-5764* 83.7 2126 7.5 191 0.75 199R-0316* 88.2 2240 6 150 0.79 205W-7943* 36 914 6 150 0.79 205W-7937* 24 610 6 150 0.79 206K-7099* 110.2 2799 8 203 1 259R-5317* 24 610 8 203 1 258K-9916* 127 3226 9 229 1 251V-3915* 105.7 2686 9 229 1 255V-7415* 127 3226 9.6 245 1 255V-7418* 114 2890 9.6 245 1 25

* Straight Base Edge without holes, can be used as wear bar.

WEAR BARS

1-8

Wear Protection

WELD HERE

BARSURFACE

1-9

NOTESWear Protection

NOTES

1-10

Wear Protection

2-1

Bulldozers / Compactors Section ContentsPage

Bulldozer Blades . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-02D11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-03D10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-07D9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-10D8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-14D7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-18D6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-20D5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-23D4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25D3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-27End Bit Wear Material Comparison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28Cutting Edge Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-29800 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-31Compactors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-35Product Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-40Hardware Torque Requirements for Plow Bolts . . . . . . . . . . . . . . . . . . . . . .2-45Bulldozer Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-46Dimensions Bulldozer Cutting Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-49Bulldozer End Bits Conversion Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-57Dimensions Bulldozer End Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-58Dimensions Bulldozer Wear Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-68

Bulldozers / Compactors

BULLDOZER BLADES

2-2

Ground Engaging Tools Bulldozer Blades

Straight Blade (S)A good general purpose blade for most dozing applications. Available formost machines.

Universal Blade (U)A straight blade with large wings to carry large loads more efficientlyover long distances. Available only for larger models.

Semi-U Blade (SU)A straight blade with small wings to provide better load carrying char-acteristics for mid-sized and large machines.

Cushion Blade (C)A relatively narrow blade, primarily for pushing scrapers.

Power Angle and Tilt Blade (P)A very versatile blade for smaller machines.

Angle Blade (A)An economical, light to medium duty blade designed for use on D8 andsmaller machines where the ability to side-cast is desired.


2-3

D11 CARRYDOZERSBulldozers / Compactors

CARRYDOZER GETDue to its shallow cutting edge angle (35 vs. 56), the D11 CD blade has only 1.5" (38 mm) of usable wear sur-face compared to a standard dozers 2.618" (66.5 mm). Failure to change cutting edges and end bits at this lowerwear limit will result in extensive damage to the cutting edge support, end bit support and excessive gusset wear.

The Reversible Cutting Edge System offers greater wear life along with a lower cost per hour than the One-wayCutting Edge System. For additional information, reference IRM GET05-09 (PELJ0520).

Reversible Cutting Edge System One-way Cutting Edge System(Shown with ARM)

D11 CARRYDOZERS

2-4

CUTTING EDGESBlade Blade Thickness Reversible Edge One-way Edge HardwareModel Ser. Number Type inches mm Qty. Part Qty. Part Qty.* Bolts Nuts Washers

11 5JP, GD 1.77 45 5 238-3171 5 229-7052 8 5P-8361 3K-9770 4K-0684Carrydozer BHZ EWL 2.36 60 5 238-3177 5 267-8654

ARM-EWL 2.36 60 5 268-8751 5 268-8750* Quantity per edge or bit.

END BITSBlade Blade Part Part # Thickness HardwareModel Ser. Number Description (R-L) inches mm Qty.* Bolts Nuts Washers

11 5JP, Penetration 273-7223/4 2.36 60 9 5P-8361 3K-9770 4K-0684Carrydozer BHZ Standard 273-7225/6

Short End Bit 273-7228/9EWL 273-7230/1 3.00 75

EWL - Short End Bit 273-7232/3ARM-EWL 273-7234/5

ARM - Penetration 223-8127/8* Quantity per edge or bit.

SIDEBAR PROTECTORBlade Sidebar AdapterModel Protector Qty. Pin Qty. Retainer Qty. Plate Qty.

11 Carrydozer 125-0800 2 8E-4708 4 4T-4707 4 135-9794 2

WELD-ON HALF-ARROW EDGE SEGMENTBladeModel Qty.

11 Carrydozer 135-9793 2


2-5

D11 BULLDOZERSBulldozers / Compactors

CUTTING EDGESBlade Blade Thickness HardwareModel Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts

11SU 4BB, 4KB, GD 1.77 45 2 9W-2426C 9 5P-8823 3K-9770**9NH, 1AP, 2 9W-2425E 94XP, 8PP EWL 2.36 60 2 9W-4495C 9

2 9W-4494E 9EEWL 3.00 75 2 135-9577E 9

2 135-9578C 911U 4CB, 5TB, GD 1.77 45 1 9W-2426C 9 5P-8823 3K-9770**

9MH, 9ZH, 2 9W-2425E 94YP, 8RP 2 9W-2424I 9

OFFSET 2 138-6483# 91 138-6484 91 138-6485 91 138-6486 9

EWL 2.36 60 1 9W-4495C 92 9W-4494E 92 9W-4493I 9

ARM-EWL 2 195-9173 91 195-9174 91 195-9175 91 201-1231 9

EEWL 3.00 75 2 195-7187 92 135-9577 91 135-9578 9

C Center Edge E End Edge I Intermediate Edge GD General Duty EWL Extended Wear Life* Number of bolts and nuts required per edge.

** Also use 4K-0684 washers.EEWL is an extra thick edge for high face wear reclamation applications.

# 195-5118 same as 138-6483 with one sharp edge.

END BITSBlade Blade EWL ARM-EWL GD OS UtilityModel Ser. Number (R-L) (R-L) (R-L) (R-L) (R-L) inches mm Qty.* Bolts Nuts

11SU, 4BB, 4KB, 8E-4545/6 195-7171/2 8E-4543/4 136-6753/4# 8E-9785/6 b 2.36 60 9 a 5P-8823 3K-9770**11U 9NH, 1AP, 8PP 109-9053/4

4CB, 5TB, 9MH, 8E-9748/9 3.00 759ZH, 4YP, 8RP

EWL Extended Wear Life GD General Duty OS Offset* Number of bolts and nuts required per end bit.

** Also use 4K-0684 washers.a Quantity per end bit.b Level cut 136-8778/9.# 195-5117/6 same as 136-6753/4 with one sharp edge.

DOZER HEAVY DUTY MINING GET HD Edge* HD End Bit** Hardware

Blade Blade Part PartModel Ser. Number Number inches mm Number inches mm Qty. Bolts Nuts

11SU 4BB, 4KB, 9NH, (1) 107-3523 a 2.36 60 107-3521/22 b 4.72 120 44 5P-8823 3K-97701AP, 8PP

11US 4CB, 5TB, 9MH, (1) 109-9050 c 2.36 60 (2) 109-9047 d*** 4.72 120 45 5P-8823 3K-97709ZH, 8RP

HD Heavy Duty* Thick one-piece edge.

** Thick flush end bit.*** Combination end edge and end bit; double thickness, 1/2 of length.

a Edge bolt quantity is 28.b End bit bolt quantity is 16.c Edge bolt quantity is 21.d End bit bolt quantity is 24.

HardwareThickness

D11 BULLDOZERS

2-6

WEAR PLATESBlade Blade ThicknessModel Ser. Number Location Part inches mm11SU 4BB, 4KB, 5-Piece Set Right End 4T-8143 0.63 16

9NH, 1AP Right Center 4T-8145Center 4T-5308Left Center 4T-8146Left End 4T-8144

3-Piece Set Right End 4T-8143Center 6Y-1100Left End 4T-8144Push Plate 4T-5308

8PP 3-Piece Set Right End 136-3984 0.55 14Center 136-3986Left End 139-3985

11US 4CB, 5TB, 5-Piece Set Right End 4T-7629 0.63 164CB UP to Right Center 4T-7632

00787 Center 4T-5308Left Center 4T-7631Left End 4T-7630

3-Piece Set Right End 4T-7629Center 6Y-1319Left End 4T-7630

4CB for 00788 3-Piece Set Right End 122-2320and UP, Center 122-2322

9MH, 9ZH Left End 122-23218RP 3-Piece Set Right End 126-8341 0.55 14

Center 126-8343Left End 126-8342


D11 125-0800 2 8E-4708 4 4T-4707 4 135-9794 2

WELD-ON HALF-ARROW EDGE SEGMENTBlade Weld-On Half-ArrowModel Edge Segment Qty.

D11 135-9793 2

RECOMMENDED WEAR BARSDimensions Wear Bars

Blade Right Wing Left Wing Center LengthModel inches mm inches mm inches mm feet mm Qty. Part No.

11SU 20 508 20 508 175.3 4452 15 4572 2* 107-33918 2438 1* 107-3386

11US 59.5 1511 59.5 1511 134 3404 11 3353 4* 107-3388* Provides 2 wear bar coverage full width of blade.


2-7

Bulldozers / CompactorsD10 BULLDOZERS

CUTTING EDGESBlade Blade Thickness HardwareModel Ser. Number Type inches mm Qty. Part Qty.* Bolts Nuts

10C 83W FD 1.38 35 2 9J-3751E 10 8J-2928 2J-3507 a10SU 79W FD 1.38 35 2 1U-4459C 9 5P-8823 3K-9770 b

2 1U-4455E 9GD 1.57 40 2 4T-0081C 9

2 4T-0082E 9GD 1.77 45 2 6Y-0016C 9

2 6Y-0017E 9EWL 2.00 50 2 4T-0607C 9

2 4T-0604E 9EWL 2.36 60 2 6Y-0020C 9

2 6Y-0021E 91RH, GD 1.38 35 2 9W-6609C 67RH, 2 9W-6608E 54KP, EWL 1.77 45 2 9W-6656C 66EP, 2 9W-6657E 5BHJ, ARM- 2.36 60 1 195-9170E 5BHA EEWL 2 195-9171C 6

1 201-1230E 5EEWL** 2 8E-2085C 6

2 8E-2086E 5EEWL** 2.95 75 2 135-9580C 6

2 135-9579E 510U 80W FD 1.38 35 3 1U-4458C 9 5P-8823 3K-9770 b

2 1U-4457E 7GD 1.57 40 3 4T-0083C 9

2 4T-0084E 7GD 1.77 45 3 6Y-0018C 9

2 6Y-0019E 7EWL 2.00 50 3 4T-0609C 9

2 4T-0608E 7EWL 2.36 60 3 6Y-0023C 9

2 6Y-0022E 71SH, GD 1.38 35 3 9W-6615C 57WH, 2 9W-6608E 54LP, EWL 1.77 45 3 9W-6658C 56FP, 2 9W-6657E 5BHF, ARM- 2.36 60 3 223-8149C 5BHP EEWL 1 195-9170E 5

1 201-1230E 5EEWL** 3 8E-2087C 5

2 8E-2086E 5C Center Edge E End Edge FD Finish Dozing GD General Duty EWL Extended Wear Life

* Per edge.** EEWL is an extra thick edge for high face wear reclamation applications.

a Uses 5P-8250 washers.b Uses 4K-0684 washers.

D10 BULLDOZERS

END BITSBlade ARM- Abrasion/

Blade Ser. EWL EWL GD Finish Impact UtilityModel Number (R-L) (R-L) (R-L) (R-L) (R-L) (R-L) inches mm Qty. Bolts Nuts10C 83W (2) 4T-6538 6 c 8J-2928 a 2J-3507

10SU, 79W, 80W 8E-4545/6 8E-4543/4 8E-9785/6 2.36 60 9 c 5P-8361 b 3K-977010U 8E-9748/9 2.95 75 7 c

4KP, 6EP, 8E-4541/2 195-7173/4 8E-4199/8 7T-4689/8HC 100-3131/2 1.75 45 7 c 5P-8823 b 3K-97701RH, 1SH, 100-3133/4 2.36 604LP, 6FP, 136-8755/4 2.95 757RH, 7WH,BHA, BHJ,BHF, BHP

HC Hot cupped design GD General Dutya Also use 5P-8250 washers.b Also use 4K-0684 washers.c Quantity per end bit.



10SU 1RH, 7RH, 4KP, 6EP, (1) 107-3510 a 2.36 60 107-3515/16 b 4.72 120 34 5P-8823 e 3K-9770BHJ, BHA

10US 1SH, 7WH, 4LP, 6FP, (3) 8E-2087 c00 2.36 60 (2) 113-0338 d*** 4.72 120 33 5P-8823 e 3K-9770BHF, BHP

HD Heavy Duty* Thick one-piece edge.

** Thick flush end bit.*** Combination end edge and end bit; double thickness, 2/3 of length.

a Edge bolt quantity is 22.b End bit bolt quantity is 6 each.c Edge bolt quantity is 5 each.d End bit bolt quantity is 9 each.e Also use 4K-0684 washers.


D10 125-0800 2 8E-4708 4 4T-4707 4 135-9794 2

NOTE: For more information on D10 and D11 Sidebar Protector, refer to GET 99-30, PELM0918.

WELD-ON HALF-ARROW EDGE SEGMENTBlade Weld-On Half-ArrowModel Edge Segment Qty.

D10 135-9793 2

HardwareThickness

2-8

Bulldozers / CompactorsD10 BULLDOZERS

2-9


WEAR PLATESBlade Blade Thickness Model Ser. Number Location Qty. Part inches mm

10C 83W Push Plate 9J-4567 0.79 2010SU 79W1-536 Wear Plates 8 3G-6344 0.47 12

Push Plate 3G-6343 0.63 1679W537-UP 5-Piece Set Right End 4T-3722 0.63 16

Right Center 4T-3725Center/Push 1U-3697Left Center 4T-3724Left End 4T-3723

1RH, 7RH, 5-Piece Set Right End 218-3922 0.55 144KP, 6EP, Right Center 9W-7260 0.63 16BHA, BHJ Center 9W-2409

Left Center 9W-7261Left End 218-3923 0.55 14

3-Piece Set Right End 218-3922Center 218-3924Left End 218-3923Push Plate 9W-2409 0.63 16

10U 80W1-467 All 9 3G-6344 0.47 1280W468-UP 5-Piece Set Right End 4T-3726 0.63 16

Right Center 4T-3729Center 1U-3697Left Center 4T-3728Left End 4T-3727

1SH, 7WH 5-Piece Set Right End 9W-7263Right Center 9W-7262Center 9W-2409Left Center 9W-7264Left End 9W-7265

3-Piece Set Right End 9W-7263Center 6Y-1080Left End 9W-7265

4LP, 6FP, 3-Piece Set Right End 218-3939 0.55 14BHF, BHP Center 218-3941

Left End 218-3940



10N, SU 16.3 415 16.3 415 155 3932 13 3962 2* 107-33908 2438 1* 107-3386

10N, U 49.8 1264 49.8 1264 107.9 2740 9 2743 4* 107-3387* Provides 2 wear bar coverage full width of blade.

D10 BULLDOZERS

D9 BULLDOZERS

2-10

CUTTING EDGESBlade Blade Thickness HardwareModel Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts

9A 52C, 90D, FD 1.12 28 1 4T-6388C 7 8J-2928 2J-3507 c 11E, 26E 2 4T-6387E 9

EWL 1.62 41 1 7J-2966C 72 7J-2965E 9

9C 70F, 45G FD 1.12 28 1 4T-6450C 15 8J-2928 2J-3507 c 20Y 2 4T-6388E 7

9R 39K FD 1.12 28 3 4T-6386 7 8J-2928 2J-3507 c EWL 1.62 41 3 7J-2980 7

9SU 21E1831, FD 1.12 28 1 4T-6459C 9 8J-2928 2J-3507 c 25E, 06A 2 4T-6456E 6

EWL 1.62 41 1 7J-2961C 9 4J-92082 7J-2960E 6

53C, 89D, FD 1.12 28 2 4T-6448 10 4J-9208 2J-3507 c 21E832-UP EWL 1.62 41 2 7J-2962 10

05A, 18K, 46K, FD 1.12 28 3 4T-6386 7 4J-9208 a 2J-3507 c 73R, 61U GD 1.38 35 3 9W-4500 7 4J-9058 c

EWL 1.62 41 3 7J-2980 7 8J-2928EWL 1.57 40 3 7T-4342* 7 4J-9058 c

18Y1-1875, FD 1.12 28 1 4T-6386C 7 4J-9208 2J-3507 c 52Y, 42S 2 4T-6385E 8

GD 1.38 35 1 9W-4500C 7 1J-49482 9W-4502E 8

GD 1.38 35 1 6Y-0310*C 7 4J-92081 6Y-0311*L 81 6Y-0312*R 8

EWL 1.62 41 1 7J-2980C 72 9W-4508E 8

EWL2** 1.77 45 1 6Y-0476*C 71 6Y-0477*L 81 6Y-0478*R 8

18Y1876-UP GD 1.38 35 2 7T-9782C 6 6V-8360 3K-9770 b2 7T-9779E 5

EWL 1.77 45 2 9W-3928C 6 5P-88232 9W-3930E 5

1MH, 5BH, FD 1.10 28 1 6Y-5539C 12 4J-9208 2J-3507 c1LP, 2LP, 2 6Y-5540E 57NH, 2ZP, GD 1.38 35 1 7T-5702C 122BP, 9LH, 2 7T-9125E 5

9RP, CLC, CLN, EWL 1.77 45 1 9W-7043C 12CLY, CMA, T9J 2 112-2471E 5C Center Edge E End Edge L Left End R Right EndFD Finish Dozing GD General Duty EWL Extended Wear Life

* Wider edges with offset bolt holes. Use only with 7T-4092/3 (long side) or 9W-9193/4 (short side).** EWL2 is an extra thick edge for high face wear reclamation applications.

a Uses 3K-5234 washers.b Uses 4K-0684 washers.c Uses 5P-8250 washers.


2-11


CUTTING EDGES ContinuedBlade Blade Thickness HardwareModel Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts

9U 55C FD 1.12 28 1 4T-6453C 13 4J-9058 2J-3507 c 2 4T-6457E 6

EWL 1.62 41 1 7J-2963C 132 7J-2964E 6

14C, 19K, FD 1.12 28 3 4T-6378C,E 6 4J-9058 a 2J-3507 c 78X 2 4T-6379I 4

GD 1.38 35 3 9W-6092C,E 6 4J-9058 c2 9W-9197I 4

EWL 1.62 41 3 7J-2959C,E 6 4J-92082 7J-2979I 4

EWL 1.57 40 3 7T-4341*C,E 6 4J-9058 c1 7T-4336*LI 41 7T-4337*RI 4

19Y1-1474, FD 1.12 28 2 4T-6381C 9 4J-9208 2J-3507 c 78S 2 4T-6382E 6

GD 1.38 35 2 7T-9126C 92 9W-4503E 6

GD 1.38 35 2 6Y-0313*C 9 1J-49481 6Y-0315*L 61 6Y-0314*R 6

EWL 1.62 41 2 9W-4507C 92 9W-4506E 6

EWL 1.62 41 2 7T-4335*C 91 7T-4344*L 61 7T-4343*R 6

EWL2 1.77 45 2 6Y-0479*C 91 6Y-0481*L 61 6Y-0480*R 6

19Y1475-UP GD 1.38 35 3 9W-0775C 5 6V-8360 3K-9770 b2 7T-9781E 5

EWL 1.77 45 3 9W-3931C 5 5P-88232 9W-3929E 5

1LH, 2ZH, FD 1.12 28 1 6Y-5538C 15 4J-9208 2J-3507 c1MP, 7PH, 2 6Y-5540E 59MP, CMH, GD 1.38 35 1 7T-5701C 15CMN, CMS, 2 7T-9125E 5CMW, CMZ, EWL 1.77 45 1 9W-7044C 15T9H 2 112-2471E 5

9USXS 20H FD 1.12 28 4 4T-6378 6 4J-9058 2J-3507 c3 4T-6377 42 4T-6379 4

C Center Edge E End Edge I Intermediate L Left End FD Finish DozingRI Right Intermediate LI Left Intermediate R Right End GD General Duty EWL Extended Wear Life

* Wider edges with offset bolt holes. Use only with 8E-4541/2 (long side) or 8E-4199/8 (short side).a Uses 3K-5234 washers.b Uses 4K-0684 washers.c Uses 5P-8250 washers.

D9 BULLDOZERS

2-12


END BITS GD* Utility

Blade Blade EWL Thickness Finish Thickness HardwareModel Ser. Number (R-L) (R-L) inches mm (R-L) (R-L) inches mm Qty. Bolts Nuts

9A 52C, 90D, 4J-8723/4 1.25 32 7 d 8J-2928 c 2J-350711E, 26E 3G-8291/2 1.38 35

9C 70F, 45G 3G-8283/4 1.57 40 7 c 4J-9208 c 2J-350720Y (2) 4T-6389 5 d 4J-9058 c

9R 39K 4T-6391/2 7 d 8J-2928 c 2J-35079SU 53C, 89D, 7T-4093/2 5J-1279/80 1.25 32 7 d 8J-2928 c 2J-3507

21E, 25E, 3G-8289/90 1.38 3518K, 46K, 3G-8281/82 1.57 4073R, 61U 9W-9193/4 1.97 5018Y, 52Y, 8E-4541/2 1U-1545/6 1.57 40 3G-7763/4 100-3131/2 1.75 45 7 d 5P-8823 b 3K-977042S 8E-4199/8 a 2.16 55 100-3133/4 2.36 60

7T-4689/8 2.36 601MH, 5BH, 2BP, 2ZP, 8E-4539/40 8E-4197/6 1.97 50 6Y-4277/8 100-3135/6 1.75 45 7 d 4J-9208 c 2J-35071LP, 2LP, 7NH, 9LH, 100-3137/8 2.36 609RP, CLC, CLN, CLY,CMA, CMN, T9J

9U 55C, 14C, 19K, 7T-4095/4 4J-8723/4 1.25 32 7 d 8J-2928 c 2J-350720H, 78X, CMH 3G-8291/2 1.38 35

3G-8283/4 1.57 408E-4197/6 1.97 50

19Y, 78S 8E-4541/2 1U-1545/6 1.57 40 3G-7763/4 100-3131/2 1.75 45 7 d 5P-8823 b 3K-97708E-4199/8 a 2.16 55 100-3133/4 2.36 607T-4689/8 2.36 60

1LH, 2ZH, 8E-4539/40 8E-4197/6 1.97 50 6Y-4277/8 100-3135/6 1.75 45 7 d 4J-9208 c 2J-35071MP, 7PH, 100-3137/8 2.36 60CMS, CMW,CMZ, 9MP, T9H

* Part numbers that begin with: 3G, 1U, 7T = Hot cupped, Abrasion.4J, 5J, 1U, 7T = Impact.

a Use only with 16" (406 mm) wide edges.b Use 4K-0684 washers.c Use 5P-8250 washers.d Quantity per end bit.

DOZER HEAVY DUTY MINING GET HD Edge HD End Bit Hardware


9SU 2BP, 7NH, 9LH, (2) 113-0321 a 2.36 60 113-0332 b-RH 4.72 120 36 4J-9208 e 2J-35071MH, 1LP, 2LP, (1) 113-0322 c 113-0333 d-LH 19

5BH, T9JHD Heavy Duty

a Edge bolt quantity is 5 each.b End bit bolt quantity is 7.c Edge bolt quantity is 12.d End bit bolt quantity is 7.e Also use 5P-8250 washers.


D9, D8 9J-9600 2 135-9350 4 8E-6359 4 152-0027 2

NOTE: For more information on D8 and D9 Sidebar Protector, refer to IRM 01-14, PELM1017.

2-13


WEAR PLATESBlade Serial Part ThicknessModel Number Location Qty. Number inches mm

9A 52C, 90D, 11E, 26E All 5 3J-3380 0.47 129R 63E, 39K Sides 4 6J-9249 0.47 12

Center 1 6J-9248 0.63 169SU 53C, 89D, 21E, 25E, 06A Wear Plates 4 2J-8523 0.47 12

Push Plate 1 2J-8524 0.79 2018K, 46K, 73R, 61U, 05A Wear Plates 4 6J-9249 0.47 12

Push Plate 1 6J-9248 0.63 1618Y1-1875, 52Y1-1875, 425 5-Piece Set Right End 4T-3730 0.63 16

Right Center 4T-3732 0.63 16Center/Push 1U-0902 0.63 16Left Center 4T3733 0.63 16Left End 4T3731 0.63 16

All Push Plate 4-Piece Set Push Plate 4 1U-0903 0.47 12Push Plate 1 1U-0902 0.63 16

18Y1876-UP 5-Piece Set Right End 9W-1258 0.63 16Right Center 9W-1259 0.63 16Center/Push 9W-0810 0.63 16Left Center 9W-1260 0.63 16Left End 9W-1261 0.63 16

1MH, 5BH, 7NH, 5-Piece Set Right End 218-3885 0.55 141LP, 2LP, 2ZP, Right Center 9T-0251 0.63 16CLY, CMA, T9J Center 7T-5803 0.63 16

Left Center 9T-0252 0.63 16Left End 218-3887 0.55 14

3-Piece Set Right End 218-3885 0.55 14Center 218-3888 0.55 14Left End 218-3887 0.55 14Push Plate 7T-5803 0.63 16

9RP, CLC 3-Piece Set Right End 218-3885 0.55 14Center 218-3888 0.55 14Left End 218-3887 0.55 14

9U 55C Wear Plates 4 2J-8525 0.47 12Push Plate 1 2J-8524 0.79 20

14C, 19K, 78X Wear Plates 4 6J-9269 0.47 1219Y1-1474, 78S1-1474 5-Piece Set Right End 4T-3734 0.63 16

Right Center 4T-3736 0.63 16Center 1U-0902 0.63 16Left Center 4T-3737 0.63 16Left End 4T-3735 0.63 16

All Push Plate Push Plate 1 1U-0903 0.47 1219Y1475-UP 5-Piece Set Right End 9W-0812 0.63 16

Right Center 9W-0809 0.63 16Center 9W-0810 0.63 16Left Center 9W-0811 0.63 16Left End 9W-0808 0.63 16

1LH, 2ZH, 7PH, 1MP, 3-Piece Set Right End 217-7155 0.55 149MP, CMS, CMZ, T9H Center 217-7156 0.55 14

Left End 217-7157 0.55 14CMH, CMN Push Plate 7T-5803 0.63 16

9C 70F, 45G, 20YI-533, Push Plate 1 4J3868 0.63 1620Y543 Push Plate 1 9J-4567 0.79 20

Push Plate 1 4T-9534 0.79 20



9N, SU 13.4 340 13.4 340 139.7 3548 12 3658 2* 107-33898 2438 1* 107-3386

9N, U 45 1144 45 1144 93 2364 8 2438 4* 107-3386* Provides 2 wear bar coverage full width of blade.

D8 BULLDOZERS

2-14



8A 07A, 18C, 33D, FD 0.75 19 2 4T-2943 16 1J-6762 2J-3506 99D, 87D, 07E, FD 1.00 25 2 4T-2888

22E, 72D GD 1.38 35 2 9W-865728E1-11125 FD 1.00 25 4 4T-6532 6 5J-2409 2J-3505

GD 1.38 35 4 6Y-6761EWL 1.57 40 4 107-3474*

4 7T-4348*28E11126-UP, FD 1.00 25 3 4T-2994 8 4J-9058 2J-350793E, 14F, 77C GD 1.38 35 3 9W-8658

EWL 1.57 40 3 107-3484*3 7T-4351*

05Y, 41Z, 27B FD 1.00 25 2 4T-2988C 7 4J-9208 2J-3507 a2 4T-2987E 6

GD 1.38 35 2 9W-8655C** 72 9W-8657E** 6

GD 1.38 35 2 1U-4933C 72 1U-4932E 6

EWL 1.77 45 2 107-3479C 72 107-3481E 6

EWL 1.57 40 2 7T-4353C* 72 7T-4352E* 6

1HH, 2XP, FD 1.12 28 3 9W-5432 8 4F-4042 2J-3507 b9AH, 6NH, 4ZP GD 1.38 35 3 9W-9098 8

EWL 1.77 45 3 112-2474 8BHR, 9ZP, DZD, FD 1.12 28 3 135-9373 8 4F-4042 2J-3507 b

D1E, D1F GD 1.38 35 3 135-9628EWL 1.77 45 3 135-9629

8C 71F, 77G FD 1.00 25 1 4T-2867 13 5J-2409 2J-35058R 43K FD 1.00 25 2 4T-3418 10 5J-2409 2J-35058SU LGP KMB, LAA, DZC FD 1.12 28 1 4Z-9058 13 4J-9058 2J-3507 b

2 6Y-5540 58SU 08A, 12C, 18C, FD 0.75 19 2 4T-2944 13 1J-6762 2J-3506

32D,03E, 86D, FD 1.00 25 2 4T-286044C1-1192

44C1193-UP, FD 1.00 25 2 4T-2862 10 1J-6762 2J-350673D

78C, 29E, 94E FD 1.00 25 2 4T-6531 10 5J-2409 2J-3505GD 1.38 35 2 6Y-6764

EWL 1.57 40 2 6Y-5776*EWL 1.57 40 2 107-3477

69E, 14J, 44K, FD 1.00 25 2 4T-3418 10 5J-2409 2J-350595S, 80V, 47K GD 1.38 35 2 6Y-6763

EWL 1.57 40 2 6Y-5777*EWL 1.77 45 2 107-3476

29V, 30W FD 1.00 25 3 4T-2988 7 4J-9058 2J-350768V, 60V GD 1.38 35 3 9W-8657

EWL 1.77 45 3 107-3479EWL 1.57 40 3 7T-4353*

04Y1-1939 FD 1.12 28 2 4T-3423C 6 4J-9208 2J-35072 4T-3417E 5

GD 1.38 35 2 1U-4930C 62 1U-4929E 5

GD 1.38 35 2 6Y-6358C** 62 6Y-6359E** 5

EWL 1.77 45 2 107-3482C 62 107-3480E 5

EWL 1.57 40 2 7T-5235C* 61 7T-4346L* 51 7T-4345R* 5

C Center Edge E End Edge L Left End R Right End FD Finish Dozing GD General Duty EWL Extended Wear Life* EWL wider edges with offset bolt holes. Use only with EWL end bits - 7T-4088/9 (long side) and 9W-8651/2 (short side).

** 11" (280 mm) wide edges.a Uses 3K-5234 washers. b Uses 5P-8250 washers.

CUTTING EDGES ContinuedBlade Blade Thickness HardwareModel Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts

8SU 04Y1940-UP FD 1.12 28 1 4T-9586C 11 4J-9058 2J-3507 a(Cont.) 2 6Y-5540E 5

GD 1.38 35 1 9W-4396C 112 9W-4398E 5

EWL 1.77 45 1 9W-3925C 112 9W-3927-E 5

1KH, 2PP, FD 1.12 28 1 4T-6381-C 9 4J-9058 2J-3507 a2TP, 3MP, 2 6Y-5540-E 5

3WH, 1HP, 6LH, GD 1.38 35 1 7T-9126-C 99BH, 9PH, 2NP, 2 7T-9125-E 505A, 9TP, BHW, EWL 1.77 45 1 112-2472-C 9

B8S, DZA 2 112-2471-E 58U 11C, 74D, 88D, FD 1.00 25 1 4T-3419 12 1J-6762 2J-3506

24E 2 4T-2861-E 930E, 73E, 29J FD 1.00 25 1 4T-6513-C 10 5J-2409 2J-3505

2 4T-6532-E 6GD 1.38 35 1 6Y-6765-C 10

2 6Y-6761-E 6EWL 1.77 45 1 107-3478 10

2 107-3474 6EWL 1.57 40 1 7T-4355-C* 10

2 7T-4348-E* 620F, 45K, 48K FD 1.00 25 1 4T-6513-C 10 5J-2409 2J-3505

2 4T-6512-E 6GD 1.38 35 1 6Y-6765-C 10

2 6Y-6762-E 6EWL 1.77 45 1 107-3478 10 4J-9058 2J-3507

2 107-3475 6EWL 1.57 40 1 7T-4355-C* 10

2 7T-4354-E* 630V, 65X, 69V, FD 1.00 25 2 4T-2986-C 5

34W 2 4T-2987-E 6GD 1.38 35 2 9W-8656-E 5

2 9W-8655-C 6EWL 1.77 45 2 107-3473 5

2 107-3481 6EWL 1.57 40 2 7T-4352-C* 6

1 7T-4349-L* 51 7T-4350-R* 5

6Y1-1395 FD 1.00 25 2 4T-3422-C 7 4J-9208 a 2J-35072 4T-3417-E 5

GD 1.38 35 2 1U-4931-C 72 1U-4929-E 5

GD 1.38 35 2 6Y-6360-C** 72 6Y-6359-E** 5

EWL 1.77 45 2 107-3483-C 72 107-3480-E 5

EWL 1.57 40 2 7T-4347-C* 71 7T-4346-L* 51 7T-4345-R* 5

6Y1396-UP, FD 1.12 28 1 4T-9590-C 14 4J-9058 2J-350742Z, 82M 2 4T-9587-E 5

GD 1.38 35 1 9W-4397-C 142 9W-4398-E 5

EWL 1.77 45 1 9W-3926-C 142 9W-3927-E 5

1JH, 2WP, FD 1.12 28 2 4T-6378-E 6 4J-9058 2J-3507 a6AH, 9CH, 2 9W-5232-C 59WP, CXB, GD 1.38 35 2 9W-6092-C 6A5G, DZB 2 7T-9127-E 5

EWL 1.77 45 2 112-2475-C 62 112-2473-E 5

C Center Edge E End Edge L Left End R Right EndFD Finish Dozing GD General Duty EWL Extended Wear Life

* EWL wider edges with offset bolt holes. Use only with EWL end bits 7T-4090/1 (long side) and 9W-8653/4 (short side).** 11" (280 mm) wide edges.

a Uses 5P-8250 washers.

2-15



Blade Blade EWL Thickness Finish Thickness HardwareModel Ser. Number (R-L) (R-L) inches mm (R-L) (R-L) inches mm Qty. c Bolts Nuts

8A 07A, 18C, 33D, 3J-2465/6 1.00 25 4T-6667/8 7 1J-6761 2J-350672D, 87D, 99D07E, 22E28E1-11125, 4J-8843/4 1.12 28 4T-6505/6 7 5J-2409 2J-350593E, 14F, 77C 3G-8315/6 1.12 28

3G-8285/6 1.57 4028E11126-UP 7T-4091/0 9J-1477/8 1.12 28 4T-6239/40 7 4J-9058 b 2J-3507

3G-8317/8 1.18 303G-8287/8 1.57 409W-8653/4 1.97 50

05Y, 41Z, 27B 7T-4091/0 9J-1477/8 1.12 28 4T-8089/90 7 4J-9058 b 2J-35073G-8317/8 1.18 303G-8287/8 1.57 409W-8653/4 1.97 50

6NH, 1HH, 8E-4537/8 8E-4193/4 1.57 40 6Y-4277/8 100-3139/40 1.97 50 7 4F-4042 b 2J-35072XP, 9AH, 4ZP, 136-8757/6 2.36 60BHR, 9ZP, DZD

8C 71F, 77G 4J-8843/4 1.12 28 4T-6505/6 7 5J-2409 2J-35053G-8315/6 1.12 283G-8285/6 1.57 40

8R 43K 4T-6669/70 7 5J-2409 2J-35057J-2975/6 a

8SU 08A, 12C, 18C, 4T-6671/2 1.00 25 4T-6671/2 7 1J-6761 2J-350686D, 44C, 32D,73D, 03E78C, 29E, 94E, 4J-8849/50 1.12 28 7 5J-2409 2J-350569E, 14J, 44K, 3G-8299/3001.12 2847K 3G-8277/8 1.57 4029V, 30W, 68V, 7T-4088/9 9J-1479/80 1.12 28 7 4J-9058 b 2J-350760V 3G-8301/2 1.12 28

3G-8279/80 1.57 409W-8651/2 1.97 50

04Y1-1939 7T-4091/0 9J-1477/8 1.12 28 4T-8089/90 7 4J-9208 b 2J-35073G-8317/8 1.18 303G-8287/8 1.57 409W-8653/4 1.97 50

04Y1940-UP 8E-4539/40 4J-8723/4 1.12 28 100-3135/6 1.75 45 7 4J-9208 b 2J-35073G-8291/2 1.38 35 100-3137/8 2.36 603G-8283/4 1.57 408E-4197/6 1.97 50

9PH, 3WH, 8E-4537/8 8E-4193/4 1.57 40 6Y-4277/8 100-3139/40 1.97 50 7 4J-9058 b 2J-35071HP, 6LH, 9BH, 136-8757/6 2.36 602NP, 1KH, 2PP,2TP, 3MP, 05A,9TP, KMB, LAA,BHW, B8S, DZA

8U 11C, 74D, 7T-4091/0 3J-2465/6 1.12 28 4T-6667/8 7 1J-6762 2J-350688D, 24E30E, 73E, 20F, 4J-8843/4 1.12 28 4T-6505/6 7 5J-2409 2J-350545K, 48K, 29J 3G-8315/6 1.12 28

3G-8285/6 1.57 4030V, 65X, 69V, 7T-4091/0 9J-1477/8 1.12 28 4T-6239/40 7 4J-9058 b 2J-350706Y1-1395, 3G-8317/8 1.18 30 4T-8089/9034W 3G-8287/8 1.57 40

9W-8653/4 1.97 5006Y1396-UP, 8E-4539/40 4J-8723/4 1.12 28 100-3135/6 1.75 45 7 4J-9208 b 2J-350742Z, 8ZM 3G-8291/2 1.38 35 100-3137/8 2.36 60

3G-8283/4 1.57 408E-4197/6 1.97 50

9CH, 1JH, 2WP, 8E-4537/8 8E-4193/4 1.57 40 6Y-4277/8 100-3139/40 1.97 50 7 4J-9058 b 2J-35076AH, 9WP, CXB, 136-8757/6 2.36 60A5G, DZB

* Part numbers that begin with: 3G = Hot cupped, Abrasion. EWL Extended Wear Life GD General Duty3J, 4J, 9J = Impact.

a 1.57" (40 mm) thick. b Uses 5P-8250 washers. c Quantity per end bit.

D8 BULLDOZERS

2-16


2-17

D8 BULLDOZERS Bulldozers / Compactors


8A 28E, 93E, 14F, 77C, 2XP, 4ZP, Wear Plates 5 2J-8526 0.40 10054, 412, 27B, 9AH, 6NH

8C 71F, 77G Push Plates 2J-9418 0.63 168R 43K Push Plates 1 6J-9285 0.63 168SU 78C, 29E, 94E Wear Plates 4 4J-4205 0.47 12

Push Plate 1 4J-4129 0.79 2080V, 95S, 69E, 14J, 44K, 47K Wear Plates 4 6J-9286 0.47 1229V, 30W, Wear Plates 5 9J-1659 0.47 1268V, 60V Push Plates 1 9J-6870 0.63 1604Y1-1939 Wear Plates 5 1U-4417 0.47 12

Push Plate 6J-9248 0.63 1604Y1940-UP, 74M, 402, 5-Piece Set Right End 9T-0249 0.63 169TB, 26B Right Center 9T-0251 0.63 16

Center/Push 4T-9592 0.63 16Left Center 9T-0252 0.63 16Left End 9T-0250 0.63 16

1KH, 2PP, 2TP, 3MP, 5-Piece Set Right End 9W-2757 0.63 16DZA, B8S, 2NP, 9BH, Right Center 9W-2758 0.63 169PH, 1HP, 6LH Center 9W-2756 0.63 16

Left Center 9W-2759 0.63 16Left End 9W-2760 0.63 16

3-Piece Set Right End 9W-2757 0.63 16Center 9W-1771 0.63 16Left End 9W-2760 0.63 16Push Plate 9W-2756 0.63 16

8U 30E, 73E, 29J Wear Plates 4 4J-4205 0.47 12Push Plate 1 4J-4129 0.79 20

20F, 45K, 48K Wear Plates 4 6J-9286 0.47 1230V, 65X, 69V, 34W Wear Plates 4 9J-1659 0.47 12

1 9J-7539 (RH) 0.47 121 9J-7540 (LH) 0.47 12

Push Plate 9J-6870 0.63 1606Y1-1395, 42Z, 82M Wear Plates 6 1U-4417 0.47 1206Y1396-UP 5-Piece Set Right Center 9T-0255 0.63 16

Right End 9T-0253 0.63 16Center/Push 4T-9592 0.63 16Left End 9T-0254 0.63 16Left Center 9T-0256 0.63 16

1JH, 6AH, 2WP, A5G, 3-Piece Set Right End 6Y-7245 0.55 14DZB, 9CH, 6AH Center 6Y-7244 0.55 14

Left End 6Y-7246 0.55 14



8N, SU 14.1 358 14.1 358 119.6 3037 12 3658 2* 107-33898N, U 50.4 1280 50.4 1280 67.7 1720 15 4572 2* 107-3391

* Provides 2 wear bar coverage full width of blade.

DOZER HEAVY DUTY MINING GET HD Edge HD End Bit Hardware


8L, 8U 06Y1396-UP, (1) 113-0323 a 2.36 60 113-0343 b* 4.72 120 32 4J-9508 2J-3507 c42Z, 82M

HD Heavy Duty a Edge bolt quantity is 14. c Also use 5P-8250 washers.* Combination end bit and wing edge; double thickness, 2/3 of length. b End bit bolt quantity is 18.


D9, D8 9J-9600 2 135-9350 4 8E-6359 4 152-0027 2

D7 BULLDOZERS

2-18



7A 06A, 17C5001-UP, FD 0.75 19 2 4T-2949 15 5J-4771 2J-350635D, 84D, 6E, 18E FD 1.00 25 2 4T-2863

13F, 22F, FD 0.75 19 3 4T-2948 7 5J-4771 a 2J-350630F, 72F, 13H GD 1.00 25 3 4T-2989

GD 1.00 25 3 9W-9796*4EB, 3CC, 4ZC FD 0.75 19 3 4T-3901 7 6F-0196 b 2J-3505

GD 1.00 25 3 7T-6589*EWL 1.38 35 3 135-9778*

7S 05A, 17C1-5000, FD 0.75 19 1 4T-2954 23 5J-4771 2J-350684C, 34D, 83D, GD 1.00 25 1 4T-2864

02E, 17E23F, 31F, 59F, FD 0.75 19 1 4T-2946C 7 5J-4773 2J-3506

14H 2 4T-2945E 5GD 1.00 25 1 4T-2990C 7

2 4T-2991E 553J, 49K, 60K, FD 0.75 19 1 4T-2921C 7 5J-4772 b 2J-3505

64K, S7G 2 4T-2922E 5GD 1.00 25 1 4T-2993C 7

2 4T-2992E 5GD 1.00 25 1 9W-9794C* 7

2 9W-9795E* 56KB, 8ZB, 4XC, FD 0.75 19 3 4T-5318 6 6F-0196 b 2J-35058NH, J8L, CDC GD 1.00 25 3 7T-6678*

EWL 1.38 35 3 107-33637U 42G FD 0.75 19 1 4T-2955C 9 5J-4773 2J-3506

2 4T-2952E 5GD 1.00 25 1 4T-2890C 9

2 4T-2985E 585D, 61K, 94R FD 0.75 19 1 4T-2917C 9 5J-4772 b 2J-3505

2 4T-2916E 5GD 1.00 25 1 4T-3421C 9

2 4T-3420E 5GD 1.00 25 1 9W-9793C* 9

2 9W-9792E* 55SB, 9JB, 7AC, FD 0.75 19 2 4T-7110C 6 6F-0196 b 2J-35058MH, JIL, CDL 2 4T-7109E 4

GD 1.00 25 2 7T-6591C* 62 7T-6592E* 4

EWL 1.38 35 2 135-9627C* 62 135-9626E* 4

7S-LGP 6JB, 3GH, 4FG, FD 0.75 19 3 4T-3901 7 6F-0196 2J-35054XH, 5GH GD 1.00 25 3 7T-6589*

EWL 1.38 35 3 135-9778*2RP, 8RH, 5SP, FD 0.75 19 3 128-58839KP, J4L, CDN GD 1.00 25 3 135-6537*

EWL 1.38 35 3 145-78467SU 4DB, 2FC, 2JH, FD 0.75 19 1 4T-5318C 6 6F-0196 2J-3505

1JP, 8LH, CDT 2 1U-1192E 6J6L, BHT GD 1.00 25 1 7T-6678C* 6

2 7T-6936E* 6EWL 1.38 35 1 107-3363C 6

2 107-3362E 6C Center Edge E End Edge FD Finish Dozing GD General Duty

* Edges are 11" (280 mm) wide.a Uses 5P-8248 washers.b Uses 5P-8249 washers.

2-19



Blade Blade Thickness Finish Thickness HardwareModel Ser. Number (R-L) inches mm (R-L) (R-L) inches mm Qty. Bolts Nuts7A 06A, 35D, 84D, 3J-2465/6 1.12 28 4T-6667/8 3 a 1J-6761 2J-3506

06E, 18E, 4 a 5J-477117C5001-UP22F, 30F, 72F, 3G-8293/4 0.88 22 4T-6505/6 105-0575/4 1.38 35 7 a 5J-2409 2J-350513F, 13H, 4EB, 3G-8315/6 1.00 25 105-0577/6 1.75 453CC, 4ZC 4J-8843/4 1.12 28

9W-6199/8 1.38 357S 05A, 84C, 34D, 4T-6671/2 7 a 5J-4771 2J-3506

83D, 02E, 17E,17C1-50008ZB, 23F, 31F, 59F, 3G-8293/4 0.88 22 4T-6505/6 105-0575/4 1.38 35 7 a 6F-0196 2J-350560K, 14H, 49K, 64K, 3G-8315/6 1.00 25 105-0577/6 1.75 454XC, 53J, 6KB, 8NH, 4J-8843/4 1.12 28CDC, J8L, S7G 9W-6199/8 1.38 35

7U 9JB, 42G, 85D, 61K, 3G-8293/4 0.88 22 4T-6505/6 105-0575/4 1.38 35 7 a 6F-0196 2J-35057AC, 94R, 5SB, 8MH, 3G-8315/6 1.00 25 105-0577/6 1.75 45J1L, CDL 9W-6199/8 1.38 35

7S-LGP 9KP, 6JB, 2RP, 8RH, 4J-8843/4 1.12 285SP, CDN, J4L 9W-6199/8 1.38 35

7SU 2FC, 4DB, 1JP, 8LH, 9W-6199/8 1.38 352JH, BHT, J6L, CDT

* Part numbers that begin with: 3G = Hot cupped, Abrasion.3J, 4J = Impact.

a Quantity per end bit.


7A 6A, 17C, 5001-UP, 35D, Wear Plates 3 3J-3141 0.31 884D, 6E, 18E, 13F, 22F,30F, 72F, 13H, 4EB, 3CC

7S 23F, 31F, 59F, 14H, 58J, Wear Plates 3 3J-3142 0.31 849K, 60K, 64K, 05A, Push Plate 4J-3699 0.63 161701-5000, 84C, 340, 83D,02E, 6KB, 8NH, 8ZB, 4XC

7SU 4DB, 1JP, 8L11, CDT Push Plate 4J-3699 0.63 16All Wear Plates 4 3J-3142 0.31 8CDT Right End 1 4Z-9148 0.50 12

Center 1 4Z-9151Left End 1 4Z-9150

7U 85D, 42G, 61K, 94R, 5SB, Wear Plates 4 3J-3142 0.31 88MH, 9JB, 7AC Push Plate 4J-3699 0.63 16

7S-LGP 6JB, 2RP, BRH, 3GH, Wear Plates 5 2J-8523 0.50 124XH, 5GH, 5SP, 9K9

D6 BULLDOZERS

2-20


CUTTING EDGESBlade Blade Thickness HardwareModel Ser. Number Type inches mm Qty. Part Qty. Bolts Nuts Washers

6A 16C5001-UP, FD 0.75 19 1 4T-3008C 11 3F-5108 4K-036737D, 81D, 16E, 2 4T-3020E 903F, 04F, 40H15C5001-UP, FD 0.62 16 1 4T-2978 24

39D, 82D, 08E, 0.75 19 2 4T-3030 1209E

54U, 44E, 47G, FD 0.75 19 2 4T-3009 10 4F-7827 2J-3506 5P-824858G, 18H

1BH1-0569, FD 0.75 19 3 4T-6262 7 5J-4773 2J-3506 5P-82484DH, 4LH, 3EH EWL 1.00 25 3 7T-99771BH0570-UP FD 0.75 19 4 4T-2952 5

EWL 1.00 25 4 4T-29851XP, 3GP, FD 0.75 19 4 4T-2952 5 5J-4773 2J-3506 5P-82481ZP, 1YP

3PP, 4BP, 8TP EWL 1.00 25 4 4T-2985 56A Custom Wide 6HP FD 0.75 19 4 109-9093 6 5J-4773 2J-3506 5P-82486P 3WP, 3XP FD 0.75 19 2 3G-4282 7 5J-4773 2J-3506 5P-82486PXL B6X, G6M, G6N FD 0.75 19 2 3G-4282 7 5J-4773 2J-3506 5P-82486P-LGP 4MP, B6L, G6G FD 0.75 19 2 4T-2315 10 5J-4773 2J-3506 5P-8248

4TP, 4WP FD 0.75 19 2 127-3050 10G6M FD 0.75 19 2 3G-4282 7

6P-LGP Foldable F6W, F6Y FD 0.75 19 2 177-4550 9 5J-4773 2J-3508 5P-82486S 09A, 01C, 06C, FD 0.62 16 1 4T-2977 18 3F-5108 4K-0367

15C1-5000 FD 0.75 19 1 4T-3021 1816C1-5000 FD 0.62 16 1 4T-2976 22

85C, 36D, 80D, FD 0.75 19 1 4T-3023 2238D, 15E, 02G,

03G, 39H95E, 17H, 46G, FD 0.75 19 1 *4T-3013C* 7 4F-7827 2J-3506 5P-8248

55G, 63S 2 *4T-3010E* 421H, 41H FD 0.75 19 1 4T-3011C 11

2 4T-3010E 41DH1-0599, 2HH, FD 0.75 19 1 4T-6659C 7 5J-4773 2J-3506 5P-8248

3JH, 4BH 4T-3010E 4EWL 1.00 25 1 7T-9976C 7

2 7T-9978E 41RP, 3EP, FD 0.75 19 3 4T-2952 5 5J-4773 2J-3506 5P-8248

1DH600-UP, EWL 1.00 25 3 4T-2985CLH, 3EP, BHN

6S-LGP 1AH, 2LH, 3FH, FD 0.75 19 3 4T-6659 7 5J-4773 2J-3506 5P-82481SP, 3HP, BHG EWL 1.00 25 3 7T-9976

6SU 1CH, 2NH, 4PH FD 0.75 19 2 9W-1878 8 5J-4773 2J-3506 5P-82488AH, 8BH EWL 1.00 25 2 6Y-38402SP, 6GP, FD 0.75 19 2 9U-8057E 4 5J-4773 2J-3506 5P-8248ECA, SGD 1 4T-6659C 7

1TP, 3FP, 1WP, FD 0.75 19 2 9W-1878 8 5J-4773 2J-3506 5P-82483RP, 4AP, 8SP, EWL 1.00 25 2 6Y-3840 8

BHM6SU Custom Wide 1WP**, 9BP** FD 0.75 19 2 106-0956 9 5J-4773 2J-3506 5P-8248

EWL 1.00 25 2 229-6599C Center Edge E End Edge FD Finish Dozing EWL Extended Wear Life P Variable Pitch Power Angle Tilt

* Optional one-piece edge 4T-3017 can be used to replace (1) 4T-3013 and (2) 4T-3010.** Identified by part #4Z-9230 or 143-0499 on the blade assembly plate.

NOTE: Cutting edges for the SLGP blades are 8" wide. Cutting edges for all other blades are 10" wide.

2-21


END BITS GD*

Blade Blade EWL Thickness Finish Hardware Model Ser. Number (R-L) (R-L) inches mm (R-L) Utility Qty. a Bolts Nuts6A 37D, 39D, 81D, 9F-7075/6 0.88 22 4T-3049/50 6 3F-5108 4K-0367

82D, 08E, 09E, 3G-8295/6 0.88 2216E, 03F, 04F,40H, 15C5001-UP,16C5001-UP44E, 47G, 58G, 4J-8261/2 0.75 19 4T-3041/2 6 4F-7827 2J-350618H, 54U 3G-8297/8 0.88 22

9W-9011/10 1.00 253EH, 1BH1-569, 4T-4455/4 4T-4435/6 6 **5J-4773**4DH, 4LH1BH570-UP, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-35061XP, 3GP, 1ZP,3PP, 4BP, 8TP, 1YP

6A Custom 6HP 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-3506Wide6P 3WP, 3XP 4T-5407/8 140-6787/8# 0.88 22 8E-9379/78 b 4 **5J-4773** 2J-35066PXL B6X, G6M, G6N 4T-5407/8 140-6787/8# 0.88 22 8E-9379/78 b 4 **5J-4773** 2J-35066P-LGP 4MP, 4TP, 4T-5407/8 140-6787/8# 0.88 22 8E-9379/78 b 4 **5J-4773** 2J-3506

4WP, B6L,G6G, G6M

6P-LGP F6W, F6Y 0.75 19 177-4551/2 4 5J-4773** 2J-3506Foldable6S 09A, 01C, 06C, 9F-7073/4 0.88 22 4T-3051/2 3 3F-5108 4K-0367

15C1-5000, 3G-8321/2 0.88 22 3 4F-039116C1-5000,85C, 36D, 38D,80D, 15E, 02G,03G, 39H95E, 46G, 55G, 5J-1419/20 0.88 22 4T-3045/6 6 4F-7827 2J-350617H, 21H, 63S 3G-8319/20 0.88 22

9W-9015/14 1.00 254BH, 1DH1-599, 4T-4455/4 4T-4435/6 6 **5J-4773** 2J-35062HH, 3JH, 1AH1DH600-UP, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-35061RP, 3EP, CLH,BHN

6S-LGP 1AH, 2LH, 3FH, 4T-4455/4 4T-4435/6 6 **5J-4773** 2J-35061SP, 3HP, BHG

6SU & 8AH, 1CH, 2NH, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 **5J-4773** 2J-3506Custom 4PH, 8BHWide SU 2SP, 6GP, 4T-5407/8 8E-9379/78 4 5J-4773** 2J-3506

ECA, S6D1TP, 3FP, 1WP, 9W-1875/6 6Y-4411/10 1.18 30 9W-8874/5 122-8617/18 6 5J-4773** 2J-35063RP, 4AP, 8SP,9BP, BHM

* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 6Y = Impact.** Uses 5P-8248 washers.# Hot cupped end bits.a Quantity per end bit.b Has angled outer corners. May substitute (2) 3G-4285 with straight outer corner.

NOTE: End bits for the 6S-LGP dozer are designed to match with 8" wide cutting blades. End bits for all other dozers are matched with 10" wide edges.

D6 BULLDOZERS

2-22


6A 01C, 06C, 15C, 37D, Wear Plates 5 1J-3106 0.38 1016C5001-UP, 39D,81D, 82D, 08E, 09E,16E, 03F, 04F, 40H44E, 18H, 47G, 54U Wear Plates 6 3J-3740 0.38 103PP, 4BP, 1XP, 3GP, Wear Plates 8 1J-3108 0.31 88TP, 1YP, 1BH

6S 09A, 16C1-5000, Wear Plates 5 1J-3108 0.38 1085C, 80D, 15E, 02G,03G, 39H95E Wear Plates 5 2J-8526* 0.38 101RP, 3EP Wear Plates 3 3J-3142 0.31 81DH, 2HH, 30H, 50H Wear Plates 4 2J-8526 0.38 10

6S LGP 1AH, 2LH, 3FH, 1SP, 3HP, 55H Wear Plates 4 3J-3380 0.50 1221H Wear Plates 7 1J-3108 0.38 10

6SU 3FP, 1TP, 8SP, 4AP, 1CH, Wear Plates 4 9J-1659 0.50 122NH, 1WP, 3RP, 9BP1CH, 2NH, 3TH, 4JH, 4PH Wear Plates 4 2J-8526 0.38 102SP, ECA, S6D, JCE, S6S Wear Plate Center 3 9J-1659 0.50 12

Wear Plate RH 1 9W-2757 0.55 14Wear Plate LH 1 9W-2760 0.55 14

6P 3WP, 3XP, B6X, G6N Wear Plates 3 3J-3142 0.31 86P-LGP 4MP, B6L Wear Plates 4 3J-3142 0.31 8

* One plate requires modification. Fit Up Close.

Fit Up OK.


2-23


5A 91H, 96H, 42K FD 0.62 16 1 4T-2978 24 3F-5108 4K-0367FD 0.75 19 2 4T-3030 12

93H1-3846 FD 0.75 19 1 4T-3008C 1198H, 11J, 13J 2 4T-3020E 993H3847-UP FD 0.75 19 2 4T-3004 9 4F-7827 2J-3506

3AH, 2FH, 2TH FD 0.75 19 1 4T-3013 7 5J-4773 a2 1U-2207 6

6RH FD 0.75 19 2 102-4580 8 4F-7827 2J-35065S 90H FD 0.62 16 1 4T-2983C 3 3F-5108 4K-0367

2 4T-2972E 4FD 0.75 19 1 4T-3027C 3

2 4T-3028E 492H, 97H, 10J, FD 0.75 19 1 4T-3025C 7

12J 2 4T-3026E 416K, 19R FD 0.75 19 1 4T-3024 282BH, 4FH FD 0.75 19 2 3G-6062 7 5J-4773 a 2J-3506

5S Pet 4AH FD 0.75 19 2 4T-0731 5 5J-4773 a 2J-35065S-LGP 1ZH, 3KH FD 0.75 19 2 1U-2211 9 5J-4773 a 2J-35065P 9WH, 6MH FD 0.62 16 2 3G-9306 6 5J-4771 a 2J-3506

2AH, 2MH, 7AH FD 0.75 19 2 3G-4282 7 5J-4773 a 2J-35064GP, 6JP FD 0.62 16 2 8E-9377 7 5J-4773 a 2J-3506

FD 0.75 22 2 4T-6659 7 5J-4773 a 2J-35068GP FD 0.62 16 2 140-0983 6 5J-4771 a 2J-3506

5PXL HGP FD 0.62 16 2 8E-9377 7 5J-4773 a 2J-3506FD 0.75 22 2 4T-6659 7

W5C FD 0.62 16 2 5Q-8193 6 5J-4773 a 2J-35065PXW FD 0.62 16 2 157-7338 7 3F-5108 b 4K-03675P-LGP 6PH, 9XH, 8NP FD 0.62 16 2 6Y-5842 8 3F-5108 b 4K-0367

2SH, 1YH FD 0.75 19 2 4T-2315 10 5J-4773 a 2J-35064FP, BHY FD 0.62 16 2 4T-8940 8 5J-4773 a 2J-3506

8ZP FD 0.62 16 2 142-4914 8 3F-5108 a 4K-03675SU 7BH FD 0.75 19 1 4T-6659 7 5J-4773 a 2J-3506

2 9U-8057 4C Center Edge E End Edge FD Finish Dozing

a Uses 5P-8248 washers.b Uses 5P-8247 washers. Petroleum field blade.


D5 BULLDOZERS

2-24


END BITS GD*

Blade Blade EWL Thickness Finish HardwareModel Ser. Number (R-L) (R-L) inches mm (R-L) Qty. Bolts Nuts

5A 91H, 96H, 42K, 9F-7075/6 0.75 19 4T-3049/50 6 c 3F-5108 4K-036711J, 13J, 98H, 3G-8295/6 0.88 2293H1-3846,93H3847-UP, 4J-8261/2 0.75 19 4T-3041/2 6 c 4F-7827 2J-35066RH 3G-8297/8 0.88 22

8E-9901/00 1.00 253AH, 2FH, 2TH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a

5S 90H, 92H, 97H, 9F-7073/4 0.75 19 4T-3051/2 6 c 3F-5108 b 4K-036710J, 12J, 16K, 3G-8321/2 0.88 2219R2BH, 4FH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-3506

5S-Pet 4AH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-35065S-LGP 1ZH, 3KH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8**5P 6MH, 9WH, 8GP 8E-7078/9 4 c 5J-4771 a 2J-3506

6JP, 2AH, 2MH, 7AH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a5PXL HGP, W5C 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-35065PXW 6Y-5839/40 3 c 3F-5108 b 4K-03675P-LGP 6PH, 9XH, 8NP, 8ZP 6Y-5839/40 3 c 3F-5108 b 4K-0367

1YH, 2SH, BHY 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8** 4 c 5J-4773 a 2J-35065SU 7BH 4T-5407/8 140-6787/8# 0.88 22 8E-9379/8 4 c 5J-4773 a 2J-3506

* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 9F = Impact.** Has angled outer corner. May substitute (2) 3G-4285 with straight outer corner.

a Uses 5P-8248 washers.b Uses 5P-8247 washers.c Quantity per end bit. Petroleum Field blade.# Hot cupped end bits.

WEAR PLATESBlade Blade ThicknessModel Ser. Number Location Qty. Part inches mm

5A 91H, 96H, 42K Wear Plates 5 1J-3106 0.38 1093H, 98H, 11J, 13J 6 1J-3106

5S 90H 5 1J-310892H, 97H, 10J, 12J, 19R 6 1J-31082BH 4 2J-8526

5P 2AH, 4GP, 6JP 5 3J-37409WH 4 3J-3740W5C, 4GP, HGP Wear Plates 3 2J-8526

5P-LGP BHY Wear Plates 4 1J-3106

2-25



4A 12D, 78D, FD 0.62 16 1 4T-2977 18 4F-3654 4K-036705F1-285005F, 97E, FD 0.62 16 1 4T-2979 1324F, 65F

10D, 79D, FD 0.62 16 1 4T-2981 2306F1-11299

52E, 96E, 26F, FD 0.62 16 1 4T-2974C 506F11300-UP, 2 4T-2973E 6

95G, 33R6AC, 2GC FD 0.62 16 2 4T-8940 8 5J-4773* 2J-3506

4S 04A, 40D FD 0.62 16 1 4T-2977 18 4F-3654 4K-0367GD 0.75 19 1 4T-3021

67E, 27F, 94G FD 0.62 16 1 4T-2983C 3 4F-36542 4T-2972E 4

GD 0.75 19 1 4T-3027C 32 4T-3028E 4

02A, 25F, 67F FD 0.62 16 1 4T-2980 15 4F-365493C FD 0.62 16 1 8A-8580C 7

2 8A-8581E 42TC, 3CH, 3DC FD 0.62 16 2 4T-3720 6 5J-4773* 2J-3506

4S-LGP 4HC FD 0.62 16 2 4T-8940 8 5J-4773* 2J-350684E, 19J, 45J EWL 0.77 19 2 4T-3028 4 4F-3654 4K-0367

0.77 19 1 4T-3029 7FD 0.62 16 2 4T-2972 4 4F-3654

0.62 16 1 4T-2982 74P 6CH FD 0.62 16 2 6Y-5841 6 3F-5108 a 4K-0367

2YH FD 0.62 16 2 4T-6230 6 3F-5108 a 4K-03679ZB, 4AC, FD 0.62 16 2 3G-9306 6 5J-4773* 2J-35065NH, 7EH

9SH FD 0.62 16 2 104-9634 6 3F-5108 a 4K-03678LP FD 0.62 16 2 140-2187 6 3F-5108 a 4K-0367

4P-LGP 4GH, 9YH, 8ZH FD 0.62 16 2 4T-6232 8 3F-5108 a 4K-03675EC, 5RH, 7CH FD 0.62 16 2 4T-8940 8 5J-4773* 2J-35066DH, 9TH, 8MP FD 0.62 16 2 6Y-5842 8 3F-5108 a 4K-0367

8YP FD 0.62 16 2 141-2238 8 3F-5108 a 4K-03674PXL 6XH FD 0.62 16 2 8E-9377 7 5J-4773* 2J-3506

GD 0.77 19 2 4T-6659 7 5J-4773* 2J-3506C Center Edge E End Edge FD Finish Dozing EWL Extended Wear Life GD General Duty

* Uses 5P-8248 washers.a Uses 5P-8247 washers.

D4 BULLDOZERS

2-26


END BITS GD*

Blade Blade EWL Thickness Finish HardwareModel Ser. Number (R-L) (R-L) inches mm (R-L) Qty. Bolts Nuts

4A 10D, 12D, 78D, 5A-4565/6 0.88 22 4T-3043/4 3 c 3F-5108 a 4K-036779D, 52E, 96E,97E, 05F, 06F,24F, 26F, 65F,95G, 33R6AC, 2GC 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4 c 5J-4773 a 2J-3506

4S, 02A, 04A, 93C, 9F-7073/4 0.75 19 4T-3051/2 6 c 3F-5108 a 4K-03674S-LGP 40D, 67E, 84E, 3G-8321/2 0.88 22

25F, 27F, 67F,94G, 19J, 45J3DC, 2TC, 4HC, 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4 c 5J-4773 a 2J-35063CH

4P, 6DH,4GH, 8LP, 0.62 16 (2) 4T-6229 3 c 3F-5108 a 4K-03674P-LGP 9YH, 8ZH, 8MP, Straight Corner

6CH, 4AC, 2YH, or 6Y-5839/40 a9TH, 9SH, 8YP Angled Corner9ZB, 5EC, 7CH, 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4 c 5J-4773 a 2J-35065RH, 5NH

4PXL 6XH 4T-5407/8 140-6787/8** 0.88 22 8E-9379/8 b 4 c 5J-4773 a 2J-3506* Part numbers that begin with: 3G = Hot cupped, Abrasion.

9F, 5A = Impact.** Hot cupped end bits.

a Uses 5P-8247 washers.b Has angled outer corner. May substitute (2) 3G-4285 with straight corner.c Quantity per end bit.


4A 10D, 79D, 52E, 96E, Wear Plates 1 3J-3115 0.31 806F, 26F, 95G, 33R12D, 78D, 97E, 05F, 2 3J-311624F, 65F

4S 02A, 25F, 67F 2 3J-311467E 1 3J-3117

4P 9ZB, 4GH, 9SH, 4AC, 4 3J-31165NH, 7EH, 6DH, 9TH,6YH, 8LP

2-27



3S 6EH, 15W, 86U FD 0.62 16 2 4T-6230 6 3F-5108 4K-036731M, 40V FD 0.62 16 2 4T-6231 7

3P 8SU, 1GP, FD 0.62 16 2 4T-6230 6 3F-5108 4K-03672JP, 9RH

96X, 5WH, 8JP FD 0.62 16 2 4T-6232 88HP, 8KP FD 0.62 16 2 6Y-5841 6

8XP FD 0.62 16 2 141-0413 8Super SLGP 5LH FD 0.62 16 2 4T-6230 6 3F-5108 4K-0367 a

1 4T-6231 7Narrow PLGP FD 0.62 16 2 157-7338 7 3F-5108 4K-0367a Use 5P-8247 washers. FD Finish Dozing

END BITSBlade Blade Thickness HardwareModel Ser. Number Finish inches mm Qty. Bolt Nut

3P 8HP, 8KP, 2JP, 9RH, 85U, 6EH, (2) 4T-6229 b 0.62 16 3 c 3F-5108 4K-036796X, 1GP, 5LH or

3S, 3S-LGP 15W, 31M, 40V, 86U, 6EH 6Y-5839/40 a3P-LGP 5WH, 8XPa Have angled outer corner.b Straight corner.c Quantity per end bit.


3P-LGP 85U1-8375 Wear Plates 3 3J-3114 0.31 885U8376-UP 1 3J-3117 or

2 3J-3116or 5 1J-3108

END BIT WEAR MATERIAL COMPARISON

2-28

END BIT WEAR MATERIAL COMPARISON

This table compares the amount of available wear material for each end bit on the D8 through D11 R Series TTT.These figures should be viewed only as appropriate indicators of wear life, as actual end bit life will vary by jobapplication.

CUTTING EDGESWear Material

Model Type Part Number (R-L) lb kg

D11R ARM Penetration (75 mm) 223-8127/8 176.8 80.2*Carrydozer Penetration (60 mm) 273-7223/4 139.0 63.0

Endbits EWL (75 mm) 273-7230/1 83.1 37.7Standard (60 mm) 273-7225/6 73.0 33.1EWL Short (75 mm) 273-7232/3 14.0 6.4Short End Bit (60 mm) 273-7228/9 13.8 6.3

D11R Offset (60 mm) 272-7225/6 164.7 74.7SU, U EWL 8E-4545/6 147.9 67.1

Endbits GD 8E-4543/4 120.5 54.7Offset Short (60 mm) 273-7228/9 103.1 46.8Utility (75 mm) 8E-9748/9 81.2 36.8Utility (60 mm) 8E-9785/6 68.8 31.2

D10R EWL 8E-4541/2 121.5 55.1SU, U Abrasion/Impact 7T-4688/9 99.4 45.1

Endbits Utility (75 mm) 136-8755/4 91.3 41.4Utility (60 mm) 100-3133/4 76.1 34.5GD 8E-4198/9 75.0 34.0Utility (45 mm) 100-3131/2 58.6 26.6

D9R EWL 8E-4539/40 72.1 32.7SU, U GD 8E-4196/7 55.6 25.2

Endbits Utility (60 mm) 100-3137/8 47.0 21.3Utility (45 mm) 100-3135/6 35.8 16.2Finish (45 mm) 6Y-4277/8 25.3 11.5

D8R Utility (50 mm) 100-3139/40 27.1 12.3A, SU, U EWL 8E-4537/8 26.3 11.9Endbits GD 8E-4193/4 21.2 9.6

Finish (40 mm) 6Y-4277/8 25.3 11.5* Steel weight only. Does not account for increased wear life of ARM.


2-29

CUTTING EDGE SUPPORTSFOR D6R THRU D11R BULLDOZER BLADES

The cutting edge support is an integral part of the blade structure to which the cutting edges and endbits are bolted. These cutting edge support plates offer the same high quality materials and dimen-sional precision as the factory originals. Due to the critical nature of the bolted connection betweenthe GET and dozer blade, a genuine Cat cutting edge support will guarantee dimensional accuracy.Since some of these parts are MAO, made as ordered, check your parts system for availability.

DescriptionThese cutting edge support plates are available for factory bulldozer blades on D6R thru D11R TrackType Tractors. The cutting edge support is an integral part of the blade structure that mounts the cuttingedges and end bits. See the Illustration 1 (Part Identification) on next page for details. The cutting edgesupport consists of one piece for Straight, Angle, and Carrydozer blades. The Universal and Semi-Ublades use a three-piece cutting edge support system that consists of one support in the center alongwith another support for the right and left hand sides. Cutting Edge Supports table on page 2-28 showsthe required cutting edge support part numbers for the corresponding D6R thru D11R bulldozer blades.

Features and BenefitsThe cutting edge support provides a structure to which the cutting edge and end bit are bolted. Prolongedoperation with loose hardware can cause the bolts to elongate the mounting holes in the support. Thismakes it increasingly difficult to keep hardware tight. Repeatedly burning-off hardware also weakensthe support around the bolt holes. If cutting edges and end bits are not replaced soon enough, severewear and damage can occur to the cutting edge support. If a blade is suffering from any of these prob-lems, a genuine Cat cutting edge support will ease the pain with its guaranteed dimensional accuracy.

Installation InstructionsAccurate positioning and welding of a new support is critical. The dimensions for the proper angle() and distance (X) from the center of the bolt hole in the cutting edge bolt hole to the lower edge ofthe moldboard are located in Illustration 2 (Critical Dimensions) below. For end supports, distance(X) is from the center of the bolt hole in the bottom row to the lower edge of the moldboard.Failure to adhere to these dimensions could result in improper fit up as well as poor GET performance.

All gussets and structural supports that were removed must be replaced. Use E7018 welding rod or anequivalent for all welding.

CUTTING EDGE SUPPORTSBulldozers / Compactors

Illustration 1Part Identification

Illustration 2Critical Dimensions

CUTTING EDGE SUPPORTS

2-30


CUTTING EDGE SUPPORTSDistance

Blade CE Angle (X)Model Blade Serial Number Support Location Qty. () inches mm

D11CD 5JP, BHZ 135-2107 all 1 35 7.76 197D11R SU 4BB, 4KB, 9NH, 1AP, 4XP, 8PP 101-9540 outside 2 56 7.95 202

101-9533 center 1 56 7.95 202D11R U 4CB, 5TB, 9MH, 9ZH, 4YP, 8RP 8E-6346 outside 2 56 7.99 203

8E-6347 center 1 56 7.99 203D10R SU 1RH, 7RH, 4KP, 6EP, BHJ, BHA 8E-3581 outside 2 56 8.27 210

8E-7430 center 1 56 8.27 210D10R U 1SH, 7WH, 4LP, 6FP, BHF, BHP 8E-5080 outside 2 56 8.27 210

8E-6867 center 1 56 8.27 210D9R SU 1MH, 5BH, 1LP, 2LP, 7NH, 2ZP, 2BP, 9LH, 8E-5590 outside 2 56 6.57 167

9RP, CLC, CLN, CLY, CMA 109-6347 center 1 56 6.57 167D9R U 1LH, 2ZH, 1MP, 7PH, 9MP, CMH, CMN, CMS, 8E-9228 outside 2 56 6.57 167

CMW, CMZ 8E-9227 center 1 56 6.57 167D8R SU 1KH, 2PP, 2TP, 3MP, 3WH, 1HP, 6LH, 9BH, 6I-8403 outside 2 56 6.57 167

9PH, 2NP, 05A, 9TP, BHW 7T-5936 center 1 56 6.57 167D8R U 1JH, 2WP, 6AH, 9CH, 9WP, CXB 6I-8402 outside 2 56 6.57 167

7T-7831 center 1 56 6.57 167D8R A BHR, 9ZP 147-3527 all 1 57 6.50 165D7R S 6KB, 8ZB, 4XC, 8NH, J8L, CDC 6Y-5701 all 1 55 5.79 147D7R SU 4DB, 2FC, 2JH, 1JP, 8LH, CDT, J6L, BHT 6I-8380 outside 2 56 5.79 147

3G-5352 center 1 56 5.79 147D7R A 4EB, 3CC, 4ZC 4T-6337 all 1 57 5.47 139D7R U 5SB, 9JB, 7AC, 8MH, J1L, CDL 6Y-5700 outside 2 55 5.79 147

1U-1440 center 1 55 5.79 147D7R S LGP 2RP, 8RH, 5SP, 9KP, J4L, CDN 135-6536 all 1 55 5.83 148D6R S 1RP, 1DH600-UP, CLH, 3EP, BHN 8E-5199 all 1 57 4.33 110D6R S LGP 1AH, 2LH, 3FH, 1SP, 3HP, BHG 1U-1947 all 1 57 4.33 110D6R SU 1TP, 3FP, 1WP, 3RP, 4AP, 8SP, BHM 8E-5205 outside 2 55 5.20 132

6Y-1390 center 1 55 5.20 132D6R SU XW 1WP*, 9BP* 8E-5205 outside 2 55 5.20 132

4Z-9239 center 1 55 5.20 132D6R A 1XP, 3GP, 1ZP, 1YP, 3PP, 4BP, 8TP 6Y-1812 all 1 55 5.20 132D6R A XW 6HP 4Z-9435 all 1 55 5.20 132

CD Carrydozer Blade A Angle Blade S Straight Blade SU Semi-U Blade U Universal BladeLGP Tractor with LGP undercarriage XW Tractor with XW undercarriage

* Identified by part number 4Z-9230 or 143-0499 on the blade assembly plate.

2-31

800 SERIES BULLDOZERSBulldozers / Compactors

CUTTING EDGESBlade Blade Blade Thickness HardwareModel Type Ser. Number inches mm Qty. Part Qty. Bolts Nuts Washers

854 SU, GD 3WL, 3TL* 1.77 45 4 9W-6658** 5 5P-8823 3K-9770 4K-0684(Tiger 2 9W-6657** 5790) U-Coal, GD 3WL, 3TL* 1.77 45 3 7J-2966 7 4J-9208 2J-3507 5P-8250

2 135-9671 8SU, EWL 3WL, 3TL* 2.36 60 4 8E-2087** 5 5P-8823 3K-9770 4K-0684

2 8E-2086** 5Tiger U-Coal, GD 3WL, 3TL* 1.38 35 2 9W-4398 5 4J-9208 2J-3507 5P-8250690 2 7T-9126 9

2 9W-6092 6U-Coal, EWL 3WL, 3TL* 1.57 40 2 9W-3927 5

2 9W-4507 92 7J-2959 6

SU, GD 3WL, 3TL* 1.77 45 3 6Y-0018 9 5P-8823 3K-9770 4K-06842 9W-6657 5

SU, EWL 3WL, 3TL* 2.36 60 3 6Y-0023 92 8E-2086 5

844 U-Coal, 3WL, 3TL* 1.10 28 2 6Y-5540 5 4J-9058 2J-3507 5P-8250(Tiger EWL 2 4T-6386 7590) 1 4T-6378 6

U-Coal, 3WL, 3TL* 1.38 35 2 7T-9125 5EWL 1 9W-6092 6

2 9W-4500 7SU, GD Australian 1.77 45 3 9W-3928 6 5P-8823 3K-9770 4K-0684

2 9W-6657 5SU, EWL 3WL, 3TL* 2 9W-3927 5 4J-9058 2J-3507 5P-8250

2 112-2475 61 7J-2980 7

SU, EEWL Australian 2.36 60 3 135-9625 6 5P-8823 3K-9770 4K-06842 8E-2086 5

836H U 1.00 25 2 4T-2986I 5 4J-9058 2J-35072 4T-3422E 71 4T-3423C 6

SU 1.00 25 3 4T-3420C 5 6F-0196 2J-35052 4T-8797E 6

S 1.00 25 3 4T-2889 9 6F-0196 2J-3505836 None 1.00 25 3 4T-2889 9 6F-0196 2J-3505834H SU 1.00 25 3 4T-3420C 5 6F-0196 2J-3505

2 4T-8797E 6834G, S 1.12 28.5 1 6Y-5539C 12 4F-4042 2J-3507834H 2 4T-6386E 7

2.36 60 1 113-0322C 12 4F-4042 2J-35072 195-7272E 7

U 1.57 40 3 7J-2960 6 4F-4042 2J-35072.36 60 3 138-0791

835, S 27K, 36G, 1.00 25 2 4T-6515# 12 5J-2409834 96G834 U 14B 1.00 25 2 4T-8797C a 6 6F-0196

2 4T-8798E b 7834C, 834B, 64G 1.00 25 2 4T-2889 9 6F-0196824C834, 825, 93G 1.00 25 1 4T-6531C 10 6F-0196824 2 4T-6532E 6826, 826C, 97X, 90K, 1.00 25 2 4T-6515 12 5J-2409 2J-3505826G, 826H 2GP825C F 89X 1.00 25 3 4T-6238 8 4F-4042 2J-3507825G 4JP 1.00 25 4 4T-6532 6 6F-0196 2J-3505825H S 1.00 25 2 4T-2994E 8 4F-4042 2J-3507

1 4T-6238CC Center Edge E End Edge I Intermediate Edge

* Balderson serial number.** Australian built blades use a 6V-8360 bolt.# Optional 12" (305 mm) wide one piece edge 4T-6455 is available.a 135-6723 same as 4T-8797 with 1" (25 mm) bolt holes.b 135-6724 same as 4T-8798 with 1" (25 mm) bolt holes.

800 SERIES BULLDOZERS

2-32


CUTTING EDGES ContinuedBlade Blade Blade Thickness HardwareModel Type Ser. Number inches mm Qty. Part Qty. Bolts Nuts Washers824C, S 35G 1.00 25 2 4T-6514 10 5J-2409 2J-3505824G, 2HP 1.00 25 2 4T-3420 5 6F-0196 2J-3505824H 2 122-9227 6824S 88H 1.13 29 2 4T-6448 10 4J-9058 2J-3507816, 816F 51K 1.00 25 1 4T-6531C 10 6F-0196 2J-3505

2 4T-6532E 641S, 15Z, 0.75 19 1 4T-2922C 5 5J-24093ZP 2 4T-2923E 7

815 24K1-1044, 0.75 19 1 4T-3008C 11 3F-5108 4K-036759E1-341 2 4T-3020E 924K1045-UP, 59E342-UP 0.75 19 2 4T-3004 9 4F-7827 2J-350639S, 17Z 0.75 19 2 4T-3012 10 5J-4773

814, 814F S 56D, 23K 0.75 19 1 4T-2921C 7 6F-0196 2J-35052 4T-2922E 5

1.00 25 1 4T-2993C 72 4T-2992E 5

36S, 3YP 0.75 19 1 4T-2922C 5 5J-2409*2 4T-2923E 7

C Center Edge E End Edge* Uses 5P-8249 washer.

END BITS General Duty (GD)*

Blade Blade Thickness Finish HardwareModel Type Ser. Number (R-L) inches mm (R-L) Qty. Bolts Nuts Washers854 U-Coal 3WL**, 3TL** 1.57 40 135-9672/3*** 5 4J-9208 2J-3507 5P-8250(Tiger SU, GD 3WL**, 3TL** 1.77 45 100-3131/2 7 5P-8823 3K-9770 4K-0684790) 8E-4198/9 2.17 55

SU, EWL 3WL**, 3TL** 2.36 60 100-3133/4 78E-4541/2 2.76 70

Tiger U-Coal, GD 3WL**, 3TL** 1.38 35 135-9698/9 6 4J-9208 2J3057 5P-8250690 SU, GD 3WL**, 3TL** 8E-4199/8 2.17 55 7 5P-8823 3K-9770 4K-0684

SU, EWL 3WL**, 3TL** 2.76 70 8E-4541/2 7844 U-Coal 3WL**, 3TL** 1.10 28 135-9669/70 5 4J-9058 2J-3507 5P-8250(Tiger SU, GD 3WL**, 3TL** 1.77 45 100-3135/36 7 4J-9058 2J-3507 5P-8250590) 8E-4196/7 1.97 50

Australian 2.17 55 8E-4199/8 7 5P-8823 3K-9770 4K-0684SU, EWL 3WL**, 3TL** 2.36 60 100-3137/8 7 4J-9058 2J-3507 5P-8250

8E-4539/40 2.56 65Australian 2.76 70 8E-4541/2 7 5P-8823 3K-9770 4K-0684

836H U, SU, S 3G-8293/4 0.88 22 4T-6505/6 7 a 6F-0196 2J-35054J-8843/4 1.12 283G-8315/6 1.12 28

834H SU 3G-8293/4 0.88 22 4T-6505/6 7 a 6F-0196 2J-35054J-8843/4 1.12 283G-8315/6 1.12 28

834G, S 1.57 40 6Y-4277/8 7 4F-4042 2J-3507834H 2.36 60 113-0334/36 b

U 151-7476/7 1.77 45138-0792/3 2.36 60

835, 834 27K, 14B, 36G 3G-8293/4 0.88 22 4T-6505/6 7 a 6F-0196 2J-350564G, 93G, 96G 4J-8843/4 1.12 28

3G-8315/6 1.12 28826, 826C, 97X, 90K, 826G 2GP, 93G825G 4JP* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact.

** Balderson serial number.*** End bit and edge.

a Quantity per end bit.b 4.72 inch (120 mm) end bit assembly available, Part Number 113-0332/33.

2-33

800 SERIES BULLDOZERSBulldozers / Compactors

END BITS General Duty (GD)*

Blade Blade Thickness Finish HardwareModel Type Ser. Number (R-L) inches mm (R-L) Qty. Bolts Nuts Washers825C 89X 3G-8317/8 1.18 30 4T-6239/40 7 a 4F-4042 2J-3507825H S 3G-8287/8 1.12 28

9J-1477/8 1.12 28824S, 824G, 35G, 64G, 93G 3G-8293/4 0.88 22 4T-6505/6 7 a 6F-0196 2J-3505824H 2HP 4J-8843/4 1.12 28

3G-8315/6 1.12 2888H 5J-1279/80 1.25 32 7 a 4J-9208 2J-3507

3G-8289/90 1.38 353G-8281/2 1.57 40

816, 814S, 56D, 51K, 23K 3G-8293/4 0.88 22 4T-6505/6 7 a 6F-0196 2J-3505814F, 816F 4J-8843/4 1.12 28

3G-8315/6 1.12 2836S, 41S, 4T-6241/2 7 a 5J-24093YP, 3ZP

815S, 815F 39S 3G-8319/20 0.88 22 4T-3045/6 6 a 5J-4773 2J-35065J-1419/20 0.88 22

24K1-1044 9F-7075/6 0.75 19 4T-3049/50 6 a 3F-5108 4K-036759E1-341 3G-8295/6 0.88 2224K1045-UP 4J-8261/2 0.75 19 4T-3041/2 6 a 4F-7827 2J-350659E342-UP 3G-8297/8 0.88 22

* Part numbers that begin with: 3G = Hot cupped, Abrasion. 4J, 5J, 9F, 9J = Impact.a Quantity per end bit.



824S 35G (2) 109-9014 a## 2.36 60 109-9024/25 b 4.72 120 34 5J-2409 2J-3505107-3524 c*** 28

834G, 834H (3) 138-0791 2.36 60 138-0792 i 2.36 60 32 4F-4042 2J-3507U-Blade 138-0793 i

834G, 834H (1) 113-0322 2.36 60 113-0334 2.36 60 40 4F-4042 2J-3507S-Blade (2) 195-7272 113-0336

834B 14B (2) 123-3754 2.36 60 124-7284/5 or 2.36 60 40 6F-0196 2J-3505U-Blade 123-3755/56 d 128-2870/1 b

834B 36G, 96G (2) 109-3146 e 2.36 60 124-7284/5 or 2.36 60 38 6F-0196 2J-3505S-Blade 128-2870/1 b#

834 (2) 128-5695 f-C 2.36 60 124-7284/5 or 2.36 60 28 6F-0196 2J-3505Balderson 128-2870/1 b#U-Blade (1) 128-5696 g-R 2.36 60 5 6F-0196 2J-3505

(1) 128-5697 g-L824 132-1043 h-LE 2.36 60 124-7284/5 or 2.36 60 20 6F-0196 2J-3505

Balderson 128-2870/1 b#U-Blade 132-1041 g-LC 2.36 60 5 6F-0196 2J-3505

132-4730 g-RC132-1042 h-RE 2.36 60 6 6F-0196 2J-3505

HD Heavy Duty Edge Location C, R, L, LE, LC, RC, RE* Thick one-piece edge.

** Thick flush end bit.*** Thick one-piece edge and includes end bits.

a Edge bolt quantity is 20.b End bit bolt quantity is 14.c Edge bolt quantity is 28.d Edge bolt quantity is 26.e Edge bolt quantity is 24.f Edge bolt quantity is 14.g Edge bolt quantity is 5.h Edge bolt quantity is 6.i Edge end and end bit combined. Also use 8C-6913 washers. Use 128-2870/1 end bits for short side.# Edges have offset bolt holes; use 124-7284/5 for long side and 128-2870/1 for short side.

## 138-8799 is 1.77 inch (45 mm) thick.


835 27K Wear Plate 1 3J-3141 0.31 8834G, 834H Center 151-7527 0.47 12U-Blade834G, 834H RH 151-7528 0.47 12U-Blade834G, 834H LH 151-7529 0.47 12U-Blade834C 96G Wear Plate 1 3J-3142 0.31 8834C 64G Push Plate 1 4J-5622 0.79 20826 97X, 90K Wear Plate 1 3J-3141 0.31 8825 89X, 93G824C 64G Push Plate 1 4J-5622 0.79 20824C, 824G, 824H 2HP, 35G Push Plate 1 5J-2663 0.79 20824F 93G Wear Plate 1 3J-3141 0.31 8824 88H Wear Plate 4 2J-8523 0.47 12

2 6J-0164816 41S, 51K Wear Plate 1 3J-3141 0.31 8

SOLE PLATESBlade Blade Blade Thickness HardwareModel Type Ser. Number inches mm Qty. Part Qty.* Bolts Nuts Washers

854 GD Australian 1.77 45 4 9W-6658*** 5 6V-8360 3K-9770 4K-0684(Tiger 2 9W-6657*** 6V-8360 3K-9770790) SU, EWL 3WL, 3TL** 1.97 50 4 135-9668 7 3R-2299 3K-9770 4K-0684

U, GD 3WL, 3TL** 1.97 50 5 135-9668 7 3R-2299 3K-9770SU, EWL Australian 2.36 60 4 8E-2087*** 5 6V-8360 3K-9770 4K-0684

2 8E-2086*** 5 6V-8360 3K-9770Tiger 690 SU, EWL/GD 3WL, 3TL** 1.97 50 3 135-9668 7 3R-2299 3K-9770 4K-0684844 SU, GD Australian 1.77 45 3 9W-3928 6 6V-8360 3K-9770 4K-0684(Tiger 2 9W-6657 5 6V-8360 3K-9770590) SU/U, EWL/GD 3WL, 3TL** 1.97 50 3 135-9668 7 3R-2299 3K-9770

SU, EWL Australian 2.36 60 3 135-9625 6 6V-8360 3K-97702 8E-2086 5 6V-8360 3K-9770

834H U 1.77 45 2 185-6509 7 6F-0196 2J-3505 5P-8249S 1.77 45 2 100-6356 4 1J-5607 2J-3507 5P-8250

834G S, U 1.77 45 2 100-6356 4 1J-5607 2J-3507 5P-8250834 U 14B 1.00 25.4 2 4T-8799 7 6F-0196 2J-3505

S 36G, 96G 1.00 25.4 2 4T-6650 8 5J-4772 2J-35051 4T-6651 9 5J-4772 2J-3505

834, 824 C 64G 1.00 25.4 2 4T-6645 6 5J-4772 2J-3505824G S 2HP 1.00 25.4 3 4T-8799 7 5J-4772 2J-3505824H S 3 4T-8799 7 6F-0196 2J-3505 5P-8249824 S 35G1-222 1.00 25.4 3 7T-3491 7 5J-4773 2J-3506

35G 223-UP 1.00 25.4 3 7T-3492 7 6V-0196 2J-3505814 S 36S, 3YP 0.75 19 2 4T-3018 4 6V-0196 2J-3505

23K, 56D 0.75 19 2 4T-3019 5 6V-0196 2J-3505* Per plate.

** Balderson serial number.*** Australian built edges use a 6V-8360 bolt.

800 SERIES BULLDOZERS

2-34


2-35

COMPACTORSBulldozers / Compactors

COM

PACT

OR

FEET

(EAR

THM

OVIN

G)

All c

ompa

ctor

tip

optio

ns a

re w

eld-

on e

xcep

t as

foot

note

d.

Trac

tor

Whe

elTi

pTi

pM

achi

neSe

rial

Part

Tip

Asse

mbl

yPa

rtSn

apM

odel

Num

ber

Num

ber

Type

Num

ber

Num

ber

Base

Pin

Sprin

gRi

ngBo

ltNu

tW

ashe

rW

eld-

on

835

44N1

-332

N/A

Soil/

Rock

N/A

7K-2

939

9S-1

645

7K-9

535

9S-1

644

5S-1

522

44N3

3-UP

N/A

Soil

N/A

8K-9

171

7K-7

071

(2) 0

T-08

56(2

) 6B-

6682

(4) 5

H-15

0483

443

EN/

ASo

il/Ro

ckN/

A7K

-293

99S

-164

57K

-953

59S

-164

45S

-152

282

5B43

NN/

ASo

il/Ro

ckN/

Documents

Get 8va Edicion