Headquarters : İşçiler Caddesi No: 124 Yenişehir / İZMİR Phone: +90.232 457 5708(pbx) Fax: +90.232 469 2350Branch : 1203/4 Sokak No: 1/C Yenişehir / İZMİR Phone: +90.232 449 3130Factory : Mehmet Akif Ersoy Mahallesi 1. Öteyaka Mevkii No: 40 Kemalpaşa / İZMİR Phone: +90.232 887 1700 (pbx) Fax: +90.232 887 1115

• Gate Valves (Resilient Seated)• Butterfly Valves - Double Eccentric - Wafer Type• Checkvalves - Swing Type - Lifting Type• Strainers• Ball Valves (2 Piece)• Dismantling Joints

2

RESILIENT SEATEDGATE VALVES

F5 - PN 16

50089045024,5410

12x53455

141

45070040022

35512x23

400

101

40059035020

2958x23340

66

35048030019

2408x23285

41

32542530019

2108x19250

32

30037025019

1808x19220

22

28033025019

2008x19200

18

27030020019

1454x19185

13

25027020019

1254x19165

11

300250200150125100806550400310

127045028

52516x31

580

215

350290

100445026,5470

16x28520

190

30027089045024,5410

12x23455

115

25025070040022

35512x23

400

72

20023059035020

2958x23340

45

150

Nominal Pressure

Nominal DiaValve DimensionsTS 457/1DIN 3352/2-F4

Flange DimensionsTS ISO 7005-2DIN 2501

Weight

F4 - PN 16

21048030019

2408x23285

30

12520042530019

2108x19250

25

10019037025019

1808x19220

18

8018033025019

2008x19200

16

6517030020019

1454x19185

13

5015027020019

1254x19165

10

DNLH

D1bK

nxdD

Kg.

Material

Body Bonnet Stem Nut Stem Wedge O-Ring Seal

(GGG40) (GGG40) BRONZE MS58 X20Cr13 GGG40/EPDM NBR EPDM

Part Name Temp. °C Pressure PN

-10...... +80 10 - 16

Resilient seated gate valves are used for general purpose on/off operations in municipal, agricultural and industrial infrastructural networks.The sealing is achieved by the vulcanized rubber on the wedge acting directly on the body internal wall.Opening and the closing is done by CCW and CW rotary motion of the non-rising stem, respectively. This action moves the wedge up and down, confined and guided on the monoblock internal ribs of the body. The wedge is fitted in the shell form on the cover, leaving no visual form in the direction of flow. This ensures the laminar flow through the valve with virtually no sensible head loss.

RESILIENT SETAED GATE VALVE (Non-rising Stem)General :

Nominal Dia. : DN50 – DN400Nominal Pressure : PN10 - 16Material : EN-GJS 400-15 (GGG 40) Ductile IronFlange Standard : TS ISO 7005-2 / TS EN 1092-2Dimensions : DIN 3202 – F4 / TS EN 558/1-14Operating Temp. : -10 ºC … +80 ºCCoating : Electrostatic Epoxy Powder RAL5005

Applications•Municipal, agricultural and industrial use.•Liquids with no acidic or alcalic or flammable value.

Technical Features

L

H

DN

D1

b

D

dK

3

BUTTERFLY VALVEFLANGED

Applications• Municipal and Agricultural Irrigation.• Liquids with no acidic or alcalic or flammable value.

Valve Type :Flanged Type Butterfly ValveDN/ANSI : DN 150-DN 3000 6” - 120” Nominal Pressure : PN 10, PN 16, PN 25, PN 40Flange Standards : PN 10, PN 16, PN 25, PN 40Top Flange : ISO 5211Marking : EN 19Face to Face dims. : EN 558-1/14Test Standard : EN 12266-1

Technical FeaturesBUTTERFLY VALVE (Flanged, Double Eccentric)

Flanged butterfly valves are of a double eccentric design.It provides complete leakage tightness by its elastomeric seat which is connected to disc with the retaining ring. It is generally controlled manually with gearbox, electrical, pneumatic and hydraulic actuator. The design can either be of single or double eccentrical disc centerline as an option.

General

157

183

223

245

279

307

336

361

420

473

554

600

683

795

932

1070

1158

1329

1500

1560

1630

1855

157

183

223

245

279

316

355

388

451

494

566

600

698

845

932

1070

1158

1329

1500

1560

1630

1855

165

213

220

273

285

325

343

375

435

488

550

620

682

800

962

1110

1170

1290

1500

1653

1630

1900

165 75 75 160 210 230 238 -

213 75 75 190 230 230 238 -

220 75 75 220 250 230 238 -

273 75 75 250 270 230 238 83.98

285 102 102 280 290 335 315 148.9

325 102 102 310 310 350 315 223.1

358 102 102 330 330 400 315 272.6

397 102 102 360 350 450 315 318.2

465 102 102 440 390 450 315 410.2

503 135 135 465 430 600 414 511.9

580 135 135 540 470 600 414 584.5

640 225 225 570 510 600 525 682.4

682 225 225 676 550 600 525 790.5

800 225 225 735 630 600 525 980.9

962 225 225 878 710 600 525 1155.3

1110 245 245 976 790 600 709 1310

1170 245 245 1058 870 600 709 1506.6

1290 245 245 1173 950 600 709 1692.3

1500 245 245 1310 950 600 709 1903.4

1653 245 245 1444 950 600 1100 2244

1630 245 245 1550 950 600 1100 2330

1900 245 245 1810 950 600 1000 2762

A3 A3 B B M MPN 10 PN 16 PN 10 PN 16 PN 10 PN 16

H FF ØT W Z

BODY

DN b ØD ØD2 Ød Øk n

150

200

250

300

350

400

450

500

600

700

800

900

1000

1200

1400

1600

1800

2000

2200

2500

2600

3000

19

20

22

24,5

24,5

24,5

25,5

26,5

30

32,5

35

37,5

40

45

46

49

52

55

58

64

66

75

PN 10 PN 16

b ØD ØD2 Ød Øk n

8

12

12

12

16

16

20

20

20

24

24

28

28

32

36

40

44

48

52-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

19

20

22

24.5

26.5

28

30

31.5

36

39.5

43

46.5

50

57

60

65

70

75

80

285 285 23 240

340 340 23 295

395 405 28 355

455 460 28 410

505 520 28 470

565 580 31 525

615 640 31 585

670 715 34 650

780 840 37 770

895 910 37 840

1015 1025 41 950

1115 1125 41 1050

1230 1255 44 1170

1455 1485 50 1390

1675 1685 50 1590

1915 1930 57 1820

2115 2130 57 2020

2325 2345 62 2230

2555 2555

175

205

255

300

350

400

450

500

600

700

800

900

1000

1200

1400

1600

1800

2000

2200 62 2440

2860

2960

3562

175

205

255

300

350

400

450

500

600

700

800

900

1000

1200

1400

1600

1800

2000

2200

2500

2600

3000

23

23

23

23

23

28

28

28

31

31

34

34

37

41

44

50

50

50

57

57

57

72

240

295

350

400

460

515

565

620

725

840

950

1050

1160

1380

1590

1820

2020

2230

2440

2750

2850

3290

8

8

12

12

16

16

20

20

20

24

24

28

28

32

36

40

44

48

52

56

60

68

F 10

F 10

F 10

F 10

F 14

F 14

F 16

F 16

F 16

F 25

F 25

F 30

F 35

F 35

F 35

F 48

F 48

F 48

F 60

F 60

F 60

F 60

F 10

F 10

F 10

F 10

F 14

F 14

F 16

F 16

F 25

F 30

F 30

F 35

F 35

F 35

F 35

F 48

F 48

F 48

F 60

F 60

F 60

F 60

ISO 5211/1F

Free

Sha

ftW

eight

(kg)

PN 10 PN 16

30.0

45.0

63.5

83.5

131.0

149.0

226.0

251.0

325.0

488.0

606.0

878.0

1.359.0

1.949.0

3.000.0

3.689.0

4.366.0

6.300.0

9.925.0

-

-

-

PN 10

GEARBOXPN 16

Type TypeWeight (kg) Weight (kg)

AST-30 8,220 AST-30 8,220

AST-40 12,240AST-60 17,900

AST-60 17,900

AST-80 32,660 AST-80 32,660

AB1950N/SP4

AB6800NLT/SP4

AB6800N/SP4

AB6800N/SP6

A250N/SP9

A250N/SP9

IW82

IW9RA

IW11

IW13

IW14R1

58,000

100,000

100,000

111,000

225,000

222,000

262,000

570,000

1180,000

2200,000

58,000

100,000

100,000

111,000

225,000

222,000

262,000

570,000

1180,000

2200,000

AB1950N/SP4

AB6800N/SP4

AB6800N/SP6

A250N/SP9

IW82

IW9RA

IW11

IW11

IW115

IW13

IW14R1

4

BUTTERFLY VALVETECHNICAL

Material

Rear Stem Front Cover Setscrew Bolt Rear Cover Eye Bolt Key 0-ring Washer Bolt

1.4021' 1.4057 St-37, GGG 40 8.8 8.8 St-37, GGG 40 A 105 C45 K EPDM A2 A2

Part Name

Material

Part Name Body Body Seat Disc Disc Seal Retaining Ring Bolt Bushings 0-ring Front Stem Pin GGG 40-50 Welded GGG 40-50 EPDM ST-37, AISI304, A2 Bronz EPDM 1.4021' 1.4057 1.4021' 1.4057 Stainless Steel AISI316

1 1A 2 3 4 5 6 7 8 9 10

11 12 13 14 15 16 17 18 19 20

5

BUTTERFLY VALVE

35014"

30012"

25010"

2008"

1506"

1255"

1004"

803"

652½"

502"

401½"

60024"

50020"

45018"

40016"

DNRgt

H1H2H3H4LTWAt1t2bB

DNMN

d1xzkd

Kg.

Nominal Diameter

Nominal Pressure

Filter Dimensions

Flange Dimensions

PN 16 PN 10

Flan

ge D

imen

sion

sTS

ISO

7005

-2DI

N 2

501

351410280325

670

17342,2

3

470

39

300,537024531065

620

290,2

4

860

10212512x441026

33

250,5316210270

54568

16241,1

22

355

17

200257175238

44660

191

295

12

150206145203

381

139145

19

240 22

48,5

127,5179125184

342

115

210

7

103,7150110171

31452

89,7

3016

7090

10x4180

4,5

80,4122100157

290

1265,9

16018

4

65,410780

137

250 46

46,5

145

3,5

53,49275

130

23843

31,79,5

14

125

2,5

582677450500

1050154

561,3

55

77036

169

492,5577385435

920127

23475,8

5,5 3,5

90

45

65033

110

456526335400

810114

437,5

585

92

398,5468315375

765102

20385,2

5 12

70

525 30

75

408560

120

21333

22,6

110

2

Hole QtyWeight

EPN 16DN 40 ... DN 600

Material

Body Disc Handle Stem Body Seal Upper Seal

GGG25/40 SS/NI Coated Metal SS EPDM NBR 18

Part Name Temperature °C Pressure PN

-10...... +80 10 - 16

Nominal Dia. : DN40-600Nominal Pres. : PN10-PN16Flange Standard : TS ISO 7005-2 / TS EN 1092-2Operating Temp. : -10 °C ... +80 °CCoating : Electrostatic Epoxy Powder

Applications•HVAC Systems•Water Treatment/Filtering Facilities•Paper Industry•Municipal Water Pipelines

Technical Features BUTTERFLY VALVE ( Wafer Type)

Butterfly Valves of wafer type are of concentric design. They are installed in between two external flanges of the pipeline components.They are widely used in HVAC systems, filter manual back-wash systems, water treatment systems etc..for quick opening and closing the lines.The handle on the disc shaft is turned in 1/4 rotation from fully opend to fully closedposition.Electrical of pneumatic actuators are added as an option for automated on/off.The valve is not intended for regulation or partly opened operation.

General :

1 2 3 4 5 6

6

CHECK-VALVESWING TYPE

30070065024,5410

12x23455200

25060054522

35512x23

400150

20050043020

2958x23340118

15040035019

2408x2328561,5

125Nominal DiaValve DimensionsTS 457/1-DIN 3352/2-F4

Flange DimensionsTS ISO 7005-2DIN 2501Weight

350320 192108x1925046,8

10030028019

1808x1922029

8026024519

2008x1920021,5

6524022019

1454x1918517,5

5020019219

1254x1916511

DN

LHbk

nxdD

Kg.

Nominal Dia. : DN50 – DN300Nominal Pressure : PN10 - 16Material : EN-GJS 400-15 (GGG 40) Ductile IronFlange Standard : TS ISO 7005-2 / TS EN 1092-2Dimensions : DIN 3202/2 – F6 / TS EN 558/1-14Operating Temp : -10 ºC … +80 ºCCoating : Electrostatic Epoxy Powder RAL5005

Applications•Municipal, agricultural and industrial use. •Liquids with no acidic or alcalic or flammable value.•Air pipelines.

Technical Features :Check valves are used widely in pipelines conveying liquids, gases and steam.They prevent the fluid from back flow in a very simple manner.The only moving part in the check-valve is the disc with seal, hinged on the body to rotate freely, closing at an angle of 5° .This design detail ensures the drip tight closing of the disc by gravity even at very low or no-pressure applications.The disc opens in the direction of flow by the inertial effect of the moving fluid automatically. Only at no-flow condition the disc returns to its seat, preventing back flow drip tight.This offers a one-way flow through the valve.The use of swing type check-valves are very important mostly at the outlet of pumps. It is very important that the disc closes rapidly in pump applications with turn-off or electricity cut-off, before reversing flow slams the disc back to its seat, inducing waterhammer other than induced by the rapid velocity change in the pipeline. Counterweight is added to the check-valve disc stem for that purpose as an optional feature.

CHECK-VALVE (Swing Type)General :

Material

Part Name

MATERIAL FEATURES

DIMENSIONS

Body Cover Disc Stem Seat Seal

GG25/GGG40 GG25/GGG40 GG25/GGG40 Stainless Steel Pirinç (CuZn40Pb2) NBR / EPDM Rubber Coating AISI 304 /Bronz

Temp. °C Pressure PN

-10...... +120 16

ØDN

k D

bnxØd

H

L

X20Cr13

7

30072572524,5410

12x23455180

25063560022

35512x23

400140

20052151020

2958x2334092

15040642019

2408x2328553

125Nominal Dia.Valve DimensionsTS 457/1-DIN 3352/2-F4

Flange DimensionsTS ISO 7005-2DIN 2501Weight

356335 192108x1925034

10030532019

1808x1922029

8025426019

2008x1920015

6521625019

1454x1918514

5020525019

1254x1916511

DN

LHbk

nxdD

Kg.

Material

Part Name

MATERIAL FEATURES

DIMENSIONS

Body Bonnet Disc Stem Seat Seal

GG25/GGG40 GG25/GGG40 GG25/GGG40 Stainless Steel Brass(CuZn40Pb2) NBR / EPDM Rubber Coating AISI 304 /Bronze

Temp °C Pressure PN

-10...... +120 16

CHECK-VALVES(LIFTING TYPE)

Nominal Dia. : DN50 – DN300Nominal Pressure : PN10 - 16Material : Body EN-GJS 400-15 (GGG 40) Ductile Iron Disc EPDM coated Ductile iron Seat AISI 304 Stainless SteelFlange Standard : TS ISO 7005-2 / TS EN 1092-2Dimensions : DIN 3202/2 – F6 / TS EN 558/1-14Operating Temp. : -10 ºC … +80 ºCCoating : Electrostatic Epoxy Powder RAL5005

Applications•Municipal, agricultural and industrial use.•Liquids with no acidic or alcalic or flammable value•Air Pipelines

Technical Features Check valves of lifting type are used widely in pipelines conveying liquids, gases and steam.They prevent the fluid from back flow in a very simple manner.The only moving part in the check-valve is the disc with seal, spring loaded to close against the direction of flow.This design detail ensures the drip tight closing of the disc, but there is a minimum pressure needed to open the disc in the direction of flow overcoming the spring force. This value is about 0.5-0.7 bars. So, the use at very low or no-pressure applications is not possible.At no-flow condition in the pressurized pipeline the disc returns to its seat by the spring force on the disc, preventing back flow drip tight.This offers a one-way flow through the valve.It is very important that the disc closes rapidly in pump applications with turn-off or electricity cut-off, before reversing flow slams the disc back to its seat, inducing waterhammer other than induced by the rapid velocity change in the pipeline. The spring force serves for this instant closure before flow reversal.

CHECK-VALVES (Lifting Type)General

L

bnxød

Dk

H

ØDN

8

STRAINERS

400350300250200150125100806550 900800700600500

1100980749635521406356305254216205 20501850165014501250

DN

BSDkgbd

Dkgbd

Kg.

LValve DimensionsTS 11494 /DIN 3202/5-F1

Nominal Diameter

Filter Dimension

# Holes

PN 16

PN 10

# HolesWeight

Flan

ge D

imen

sion

sTS

ISO

7005

-2DI

N 2

501

4504005805254902831

40035052047044026,5

27028045541037824,528

16

270280400355320 22

12

17020034029526820

23

170180285240212

100130250210188

100130220180158

8

9085

200160138

1918

9070

185145122

1200900

11251050100046,541

1050800

10259509004341

95070091084079639,537

8206008407707273637

53040071565061032

31,534

9070

165125102

4

30020010590686045402218 23001800120090050015

22

12

2023

26

818

4

45540037024,523

16

50546043024,5

56551548224,5

28

67062058626,5

78072568930

31

89584080232,5

101595090835

34

11151050100637,5

400350320

340295268

285240212

250210188

220180158

200160138

185145122

19

165125102

Nominal Dia. : DN50 – DN900Nominal Pressure : PN10 - 16Material : Body EN-GJS 400-15 (GGG 40) Ductile Iron Filter - AISI 304 Stainless SteelFlange Standard : TS ISO 7005-2 / TS EN 1092-2Dimensions : DIN 3202/2 – F1 / TS EN 558/1-14Operating Temp. : -10 ºC … +120 ºCCoating : Electrostatic Epoxy Powder RAL5005

Applications•Municipal and Irrigation Pipeline systems•Liquids with no acidic or alcalic or flammable value•Air Pipelines

Technical Features STRAINERS ( Y-Pattern )

Stainers are widely used in pipelines to filter foreign or unwanted particles that are flowing or drifting with the flow. They prevent pipeline system components like pressure regulation valves, watermeters, pumps from getting damaged by the impact of the foreign objects or particles in the flow. They increase the lifetime of such components.Strainer of in-line type makes servicing and cleaning easy by only dismantling the cover on site.The blind bolt on the cover can be replaced by a ball valve for flushing of small particles caught in the internal filter cage.The cage is designed to withstand the pressure difference of partly clogged screen across the body in better strength for heavy duty use compared to competi-tors.

General

9

BALL VALVES

10080655040

190180170150140

DN

Gmax.

Hmax.

L

Valv

e Di

men

sion

sTS

313

8/DI

N 3

357/

6-1

Nominal Dia.

260

190

260

175

260

145

260

135

190

125# Holes

PN 1

6

Flan

ge D

imen

sion

sTS

ISO

7005

-2DI

N 2

501

Dkgbd

220180158

200160138

22

8

185145122

18

165125102

20

1501108818

4Weight/Kg. 23,718,312,69,67

Dkgbd

PN 1

0

# Holes

Weight/Kg. 22,21710,57,55,9

210170148

190150128

18 18

160130110

4

140110901614

13010080

Material

Body Flange Handle Stem Ball Rings O-Ring

GG25/40/50 GG25/40/50 ST37 SS SS PTFE Viton

Part Name Temp. °C Pressure PN

-10...... +120 6 - 10

Nominal Dia. : DN40 – DN100 ( Flanged and Threaded) Nominal Pressure : PN10 - 16Material : EN-GJL-250 (GG25)Gray Cast Iron or EN-GJS-400-15 (GGG 40) Ductile IronStandard : TS ISO 7005-2 / TS EN 1092-2Dimensions : DIN 3357/6 – 1 / TS EN 558/1-14Operating Temp. : -10 ºC … +120 ºCCoating : Electrostatic Epoxy Powder RAL5005

Applications•Municipal and Irrigation pipelines•Liquids with no acidic or alcalic or flammable value•Air Pipelines

Technical Features BALL VALVE ( 2 pieces)

Ball valves are extensively used for on/off manual operation of pipelines.The handle connected to ball stem is rotated ¼ turn from fully opened to fully closed position.The valve is easy to operate but manual fast closure of a valve can induce waterhammer on the pipeline and should be used responsibly on a pipeline.For the valves to be used as irrigation hydrant outlet valve, emptying of water inside the ball should be done to refrain body damage from frost during winter.

General

L

ØDN

k D

H

G

n x Ø

d

b

10

DISMANTLING JOINTS

7 2 7 6 4 3 5 7 7 1 7

132 777 7

4 6

75

PN16 100 125 150 200 250 300 350 400 450 500 600

Dkbdl1l2

220

180

19

19

200

310

250

210

19

19

200

310

285

240

19

23

200

320

340

295

20

23

220

340

400

355

22

28

230

370

455

410

24,5

28

250

410

520

470

26,5

28

260

410

580

525

28

31

270

430

640

585

30

31

270

430

715

650

31,5

34

280

440

840

770

36

37

300

480

PN10 100 125 150 200 250 300 350 400 450 500 600

Dkbdl1l2

220

180

19

19

200

310

250

210

19

19

200

310

285

240

19

23

200

320

340

295

20

23

220

340

400

350

22

23

220

360

455

400

24,5

23

220

360

505

460

24,5

23

230

360

565

515

24,5

28

230

370

615

565

25,5

28

250

390

670

620

26,5

28

260

390

780

725

30

31

260

410

910

840

39,5

37

895

840

32,5

31

1025

950

43

41

1015

950

35

34

1125

1050

46,5

41

1115

1050

37,5

34

1255

1170

50

44

1230

1160

40

37

700 800 900 1000

700 800 900 1000

Nominal Dia. : DN80-100Nominal Pressure : PN16Material : Body EN-GJS-400-15 (GGG 40) Ductile Iron Seal EPDM Bolts and Nuts 8.8 galvanizedFlange Standard : TS ISO 7005-2 / TS EN 1092-2Operating Temp. : -10 °C ... +80 °CCoating : Electrostatic Epoxy Powder RAL5005

Applications and Details•Dismantling Joint is shortened to help the valves dismantled from the line. •Pipelines are operated more easily for maintanance.•The length for dismantling joint helps the length L by ± 25 mm.

Technical Features DISMANTLING JOINTS

Dismantling Joints are used to help installation and dismantling of the pipeline components on a pipeline.They are of telescopic type interconnected 2 piece design.The full length is elongated and shortened as per the value given on the illusturation to fit the gap between the flanges of the component and the joint itself. The seal is then tigthened by tightening the bolts of the middle element across the conical seal, which seals onto the outer perimeter of the main element.

General

Material

Long Piece Short Piece Ring Seal Long Stud Short Stud Hexagonal nut

Ductile iron Ductile iron Ductile/Steel Rubber Galvanized Steel Galvanized Steel Galvanized Steel (GGG40) (GGG40) (GGG40/St37) (EPDM) (Ck45) (Ck45) (8.8)

Part Name Temp.°C PressurePN

-10...... +80 10 - 16

1 2 3 4 5 6 7

kD

l2l1

+25-25

b d