page 00 • Fig. RGV030 • DN 40 - 1000 • Pressure rating PN 10 - 16 • Max. 120 °C • Face To Face EN 558-1, 15 (DIN3352 F5) • Non-rising Stem • Custom made available Gate valves DIN3352 F5 Resilient Seated NRS Flanged ends Ductile Iron PN10/PN16 REEP brand RGV030 model DIN3352/EN1171 resilient gate valve, pressure rating PN 10/16, bolted bonnet, non-rising stem,Face to Face according to EN 558-1, 15 series (DIN3202 F5). All ferrous parts are fusion bonded epoxy coated internally and externally. Use of EPDM rubber on the wedge guarantees complete seal tightness and the seats are insensitive to impurities in the installation. The use of O-ring and Dust gland as stem seal guarantee a low-maintenance and long service life. DVGW certified coating & rubber are available upon request. Material EN and/or (DIN) DI GGG50 DI GGG50 420S37 EPDM EPDM EPDM DI Component Material specification Wedge Rubber Bonnet gasket O-ring Handwheel/Cap nut Stem St.St Pressure and temperature range Size water DN40 thru DN 1000 16 bar – 120 °C Ordering information Ordering code Pressure rating Flange drilling Type RGV030A PN 10/16 PN 10/16 HW OP RGV030B PN 10/16 PN 10/16 CAP OP RGV030C 40 - 1000 PN 10/16 HW WITH POSITION INDICATOR OP RGV030D PN 10/16 PN 10/16 MOUNTING INPUT FLANGE OP RGV030X SPECIFIC CUSTOM MADE DN [mm] 40 - 1000 40 - 1000 40 - 1000 PN 10/16 Body and bonnet Dimensions DN PN L H W Weight [mm] [mm] [kg] 40 16 180 160 11 50 16 50 195 160 12 65 16 70 225 180 16 16 80 255 200 20 1 1 16 285 200 26 125 16 345 220 34 150 16 385 250 45 200 16 465 280 69 250 16 565 320 106 300 16 645 350 148 350 16 762 450 220 400 16 450 290 450 16 957 640 420 500 16 0 1036 640 470 600 16 0 1188 640 700 80 700 800 1000 16 16 16 836 1450 1660 2100 800 1000 1000 1820 1235 910

Gate valves DIN3352 F5 Resilient SeatedNRS Flanged ends ... · 12/5/2018 · (DIN3352 F5) • Non-rising Stem • Custom made available Gate valves DIN3352 F5 Resilient SeatedNRS

Download PDF Report

Upload
others
View
2
Download
0

Embed Size (px)

Citation preview

Page 1: Gate valves DIN3352 F5 Resilient SeatedNRS Flanged ends ... · 12/5/2018 · (DIN3352 F5) • Non-rising Stem • Custom made available Gate valves DIN3352 F5 Resilient SeatedNRS

page 00

• Fig. RGV030• DN 40 - 1000• Pressure rating PN 10 - 16• Max. 120 °C• Face To Face EN 558-1, 15

(DIN3352 F5)

• Non-rising Stem• Custom made available

Gate valvesDIN3352 F5 Resilient Seated NRS Flanged ends Ductile Iron PN10/PN16

REEP brand RGV030 model DIN3352/EN1171 resilient gate valve, pressure rating PN 10/16, bolted bonnet, non-rising stem,Face to Face according to EN 558-1, 15 series (DIN3202 F5). All ferrous parts are fusion bonded epoxy coated internally and externally. Use of EPDM rubber on the wedge guarantees complete seal tightness and the seats are insensitive to impurities in the installation. The use of O-ring and Dust gland as stem seal guarantee a low-maintenance and long service life. DVGW certified coating & rubber are available upon request.

Material EN and/or (DIN)

DI GGG50

420S37

EPDMEPDMEPDMDI

Component

Material specification

Wedge RubberBonnet gasketO-ringHandwheel/Cap nutStem St.St

Pressure and temperature rangeSize water

DN40 thru DN 1000 16 bar – 120 °C

Ordering informationOrdering code Pressure rating Flange drilling TypeRGV030A PN 10/16 PN 10/16 HW OPRGV030B PN 10/16 PN 10/16 CAP OP

RGV030C 40 - 1000 PN 10/16 HW WITH POSITION INDICATOR OPRGV030D PN 10/16 PN 10/16 MOUNTING INPUT FLANGE OPRGV030X SPECIFIC CUSTOM MADE

DN [mm]40 - 1000

40 - 1000

PN 10/16

Body and bonnet

DimensionsDN PN L H W Weight

[mm] [mm] [kg]40 16 нпл 180 160 1150 16 н50 195 160 1265 16 н70 225 180 16

16 н80 255 200 2011лл 16 олл 285 200 26125 16 онр 345 220 34150 16 орл 385 250 45200 16 плл 465 280 69250 16 прл 565 320 106300 16 рлл 645 350 148350 16 762 450 220400 16 слл 450 290450 16 срл 957 640 420500 16 тл0 1036 640 470600 16 ул0 1188 640 700

7008001000

161616

ррл

фллмлллмнлл

836

145016602100

80010001000 1820

1235910

REEP

图章

tiger

图章