IntroductionIntroduction

FABTECH STERLING BUILDING TECHNOLOGIES PVT LTD is a jointventure between Fabtech Technologies International Ltd, India& Sterling Construction and Development Corporation,Philippines.

FABTECH Group Established in 1999, are 12years old, 400 member turnkeysolution providers with in-house design, engineering, construction and manufacturingof critical and vital elements like modular in-house partitions, HVAC, Clean roomequipment and solutions, isolation systems, and External Construction.

We are growing at a CAGR of 23%, with 72% repeat clients in India and Internationally.www.fabtecheng.com and www.fabforms.ae and is our URL.

FABTECH STERLING BUILDING TECHNOLOGIES PVT LTD is a jointventure between Fabtech Technologies International Ltd, India& Sterling Construction and Development Corporation,Philippines.

FABTECH Group Established in 1999, are 12years old, 400 member turnkeysolution providers with in-house design, engineering, construction and manufacturingof critical and vital elements like modular in-house partitions, HVAC, Clean roomequipment and solutions, isolation systems, and External Construction.

We are growing at a CAGR of 23%, with 72% repeat clients in India and Internationally.www.fabtecheng.com and www.fabforms.ae and is our URL.

THE VISIONTo become a specialist international construction company employing trendsetting and path breaking innovations.

THE MISSIONTo create a corporation which comes to mind for challenging projects, whichmakes profits, adding value to itself, our people, society and country.

THE VISIONTo become a specialist international construction company employing trendsetting and path breaking innovations.

THE MISSIONTo create a corporation which comes to mind for challenging projects, whichmakes profits, adding value to itself, our people, society and country.

The Company offers a full range of world-class fabricated and pre-engineeredconcrete form systems for commercial, residential and industrial applications.

Plaswall™ & Plasmolite™ are the products launched and have found strongacceptability in India , Middle East, Philippines, Africa, Australia, USA and UK.

The Company offers a full range of world-class fabricated and pre-engineeredconcrete form systems for commercial, residential and industrial applications.

Plaswall™ & Plasmolite™ are the products launched and have found strongacceptability in India , Middle East, Philippines, Africa, Australia, USA and UK.

Product Introduction

1 Plaswall :-It is a Lost in place formwork system, where in two fiber cementboards (FCB) of 6mm thickness are used. It uses HIMI (High ImpactMolded Inserts) bonded between two sheets of FCB in situ anderected to produce a straight-to-finish wall. A monolithic structureis then created by filling the entire structure with concrete.Additional load capacity can be obtained by providing extrareinforcing bars and/or increasing the grade of the concrete.

From structural concrete walls to thermally insulated wallsespecially designed for hot and cold climates, this patentedtechnology can meet every need.

Product Introduction

1 Plaswall :-It is a Lost in place formwork system, where in two fiber cementboards (FCB) of 6mm thickness are used. It uses HIMI (High ImpactMolded Inserts) bonded between two sheets of FCB in situ anderected to produce a straight-to-finish wall. A monolithic structureis then created by filling the entire structure with concrete.Additional load capacity can be obtained by providing extrareinforcing bars and/or increasing the grade of the concrete.

From structural concrete walls to thermally insulated wallsespecially designed for hot and cold climates, this patentedtechnology can meet every need.

Advantages : -

• Upto three times faster than conventional technology.• Faster returns on capital invested• Tried & tested in several countries.• Earthquake resistant.• No worry about brick work quality.• No worry about shortage of quality masons.• No plastering.(No messy mixing at site, workmanship issues)• No curing required.• No cracks hence long life.• Very low maintenance.• Bill of quantities defined before work.• Better predictability of costs & hence better control.• Inlaid plumbing & electrical lines, superior quality finish.

Advantages : -

• Upto three times faster than conventional technology.• Faster returns on capital invested• Tried & tested in several countries.• Earthquake resistant.• No worry about brick work quality.• No worry about shortage of quality masons.• No plastering.(No messy mixing at site, workmanship issues)• No curing required.• No cracks hence long life.• Very low maintenance.• Bill of quantities defined before work.• Better predictability of costs & hence better control.• Inlaid plumbing & electrical lines, superior quality finish.

ROOFING SLAB AND STAIR SYSTEMS :-• Strength: Panels are composed of a three-dimensional structure of high strength steel(750 MPa) and thermal insulation, which is then installed with M20 concrete. Theresulting roof and floor slabs have a bearing capacity of up to 600 kg/m -- double thestrength of typical RCC slabs using only 40% of the concrete.

• Speed: Panels are lightweight and can be carried and installed by two semi- skilledlaborers. With no shuttering or form work required, Panels radically increaseconstruction speed and reduces man-hours. Water supply and electrical conduits areconcealed within wall and slab panels and built as part of the basic structure.

ROOFING SLAB AND STAIR SYSTEMS :-• Strength: Panels are composed of a three-dimensional structure of high strength steel(750 MPa) and thermal insulation, which is then installed with M20 concrete. Theresulting roof and floor slabs have a bearing capacity of up to 600 kg/m -- double thestrength of typical RCC slabs using only 40% of the concrete.

• Speed: Panels are lightweight and can be carried and installed by two semi- skilledlaborers. With no shuttering or form work required, Panels radically increaseconstruction speed and reduces man-hours. Water supply and electrical conduits areconcealed within wall and slab panels and built as part of the basic structure.

• Affordability: Up to 50% reductions in labor costs and 35% savings in concrete and steelmake slabs upto 20% cheaper than traditional systems. By keeping building weight to aminimum, Panels also allows foundations to be built more economically.

• Comfort: Insulation within the Panels provides internal temperature reductions of upto8°C compared to typical construction, reducing energy use in cooling and helps increasingcomfort.

Our construction system substantiallyreduces your concrete, steel, and labor costs

Our construction system substantiallyreduces your concrete, steel, and labor costs

Roof Slabs:Concrete – 35%Reinforcement Steel – 100% (None Required)Labor – 30%

Staircases:Concrete – 57%Reinforcement Steel – 100% (None Required)Labor – 30%

Indian Projects Photographs

Tata Housing Development Company Ltd. – Mumbai, India

Amal Group Sales Gallery – Mumbai, India

Concorde Group – Bangalore , India

Naiknaware– Goa, India

Warai woods, Mumbai India

Apartments TMC- Mumbai, India

International Projects Photographs

60 Apartments & 15 villas Australia Project

80 Apartments Australia Project

178 villas & 2 Club house Qatar Project

Site office & 60 Porta Cabins Oman Project

35 Villas Vietnam Project

40 Villas Philippines Project

40 Villas Philippines Project

Philippines Project - High end Homes

Philippines Project – 600 HomesPhilippines Project – 600 Homes

Philippines Project – 900 Homes

Philippines Project - 1100 Homes

Philippines Project – 1100 Homes

200 Homes Philippines Project

Awarded 108000 housing units

Philippines National Police Housing Cont

Philippines National Police HousingCont

Philippines National Police Housing

Philippines Project - Cebu Resort

2 Plasmolite :-

“The ultimate solution to brick/block work &plastering!! ”

Fabtech Plasmolite holds much promise for theconstruction industry. Plasmolite has many benefitsas compared with conventional concrete. Plasmolitesaves you from the hassles of brickwork, hollow-block and plastering. It can be very well integratedwith conventional columns and beams. Usage of thisproduct leads to substantial weight reduction (dead-load), improved fire rating and maximum soundabsorption. It also offers huge saving in raw material(no gravel) and in steel reinforcement in high rise.One has to see to believe the uniformly finished andthermally insulated walls with more strength anddurability. These walls act as non-load bearing andwill find wide acceptance for various buildingsprojects.

2 Plasmolite :-

“The ultimate solution to brick/block work &plastering!! ”

Fabtech Plasmolite holds much promise for theconstruction industry. Plasmolite has many benefitsas compared with conventional concrete. Plasmolitesaves you from the hassles of brickwork, hollow-block and plastering. It can be very well integratedwith conventional columns and beams. Usage of thisproduct leads to substantial weight reduction (dead-load), improved fire rating and maximum soundabsorption. It also offers huge saving in raw material(no gravel) and in steel reinforcement in high rise.One has to see to believe the uniformly finished andthermally insulated walls with more strength anddurability. These walls act as non-load bearing andwill find wide acceptance for various buildingsprojects.

The Plasmolite technology can be used in external and internal applications, as non-load bearing (Partition walls) wall system.

Advantages : -

• Its erection takes just one-third time when compared to conventional systems.• Plasmolite saves you from the hassles of brickwork, hollow-block and plastering.• Substantial savings in raw material (no gravel required).• Increase by 6% more carpet area .• It reduces dead load of high-rise to a certain extend.• Savings in Steel reinforcement.• Plasmolite wall panels are extremely fire resistant and well suited to applications

where fire is a risk. Tests show that Plasmolite foam concrete with 112 mm widthcan protect from fire for up to 4 hours.

• Unskilled labor can do the work easily with minimal requirement of skilled labor.• Excellent thermal & acoustic properties.• Savings in Transportation & Craning.• Eco Friendly.

The Plasmolite technology can be used in external and internal applications, as non-load bearing (Partition walls) wall system.

Advantages : -

• Its erection takes just one-third time when compared to conventional systems.• Plasmolite saves you from the hassles of brickwork, hollow-block and plastering.• Substantial savings in raw material (no gravel required).• Increase by 6% more carpet area .• It reduces dead load of high-rise to a certain extend.• Savings in Steel reinforcement.• Plasmolite wall panels are extremely fire resistant and well suited to applications

where fire is a risk. Tests show that Plasmolite foam concrete with 112 mm widthcan protect from fire for up to 4 hours.

• Unskilled labor can do the work easily with minimal requirement of skilled labor.• Excellent thermal & acoustic properties.• Savings in Transportation & Craning.• Eco Friendly.

ADVANTAGES & COMPARISON WITH CONVENTIONAL WALL SYSTEMS:

Jointing Details

Indian Projects Photographs

Celon– Hyderabad, India 15000 Sqm

Amal Ambrosia –Mumbai, India

Atra– Aurangabad , India 8000 SqmPharmaceutical Factory

TCS (Tata Realty) – Pune, India 5800 sqm Cont

TCS (Tata Realty) – Pune, India 5800 Sqm

Goa Project , India 2500 Sqm

Nissan Service Centre , India 18000 Sq.ft

Indo Baijin Factory - India 8000 Sqm

Amanora Park Town ( City Corporation Limited – City Group ) – Pune, India 18005 Sqm

Philippines Project - Pharmaceutical Factory

U.A.E. Project – Prayer Room

Philippines Project - Pharmaceutical Factory

Certificates

Industrial Design, Philippines Innovation Patent, Australia Utility Model, Philippines

Design Registration, India Published Indian Patent Plaswall Trademark, India

Certificates

Plasmolite Certificate ofPhysical Properties pg2

Plasmolite Certificate ofPhysical Properties pg1

IIT Approval of PlaswallStructural Analysis

Certificates

Boundary WallCertificate

BoundaryWall Designs

National Test HouseCertificate pg1

National Test HouseCertificate pg2

Certificates

AITECH CertificationFire Testing Certificate

James HardieCertificate

Certificates

Dubai Municipal Approval

Western Abu Dhabi Municipal Approval

Certificates

Abu Dhabi Municipal Approval

Corporate Office :717, Janki Centre, Off. Veera Desai Road, Andheri (W), Mumbai - 400053 India.+ 91 - 22 - 61592800 ( 200 Lines ) , Fax : + 91 - 22 - 615928955 / + 91 - 22 – 61592855

UAE Office :Plot No: P598 – 1000, DIP Phase-2,DIP W/H No : 65 & 66, Near Ramla Hyper Market,P.O Box:118672, Dubai, U A ETelephone: +971 4 8840089 ,Fax: +971 4 8840788Email : sales.uae@fabforms.ae

Branch Office :402/403, Vishakha Arcade,Behind Mogaveera Bhavan School, Opp. Courtyard Hotel,Off Veera Desai Road, Andheri (w) Mumbai: 400 053 IndiaTel: +91 22 64553344. Fax: +91 22 61592855. Web : www.fabforms.aeEmail : sales@fabforms.ae

Corporate Office :717, Janki Centre, Off. Veera Desai Road, Andheri (W), Mumbai - 400053 India.+ 91 - 22 - 61592800 ( 200 Lines ) , Fax : + 91 - 22 - 615928955 / + 91 - 22 – 61592855

UAE Office :Plot No: P598 – 1000, DIP Phase-2,DIP W/H No : 65 & 66, Near Ramla Hyper Market,P.O Box:118672, Dubai, U A ETelephone: +971 4 8840089 ,Fax: +971 4 8840788Email : sales.uae@fabforms.ae

Branch Office :402/403, Vishakha Arcade,Behind Mogaveera Bhavan School, Opp. Courtyard Hotel,Off Veera Desai Road, Andheri (w) Mumbai: 400 053 IndiaTel: +91 22 64553344. Fax: +91 22 61592855. Web : www.fabforms.aeEmail : sales@fabforms.ae