Frontier Disks - John Deere Disk_v… · Frontier Disks Heavy Offset Disks Tandem Disks. Smooth, high-performing disks to break through hard, compacted soil With a weight-per-blade

DH51 • DH52 • DH53 • TM51 Series

Frontier Disks

Heavy Offset Disks

Tandem Disks

Smooth, high-performing disks to break through hard, compacted soil

With a weight-per-blade of 240 to 533 pounds, a penetration depth of nine inches, 10.5- or 12-inch blade spacing, and 26- to 32-inch diameter blades, Frontier Heavy Offset Disks provide high performance to fulfill all of your disking needs.

Heavy Offset DisksEverything you’ve ever wantedTillage jobs are never as easy as they seem because not every disk in the industry is designed to offer you the durability and performance that you need to see tough projects through to the end. That is, until now.

Introducing the Frontier Heavy Offset Disks. They’re everything you’re looking for in a disk. But what does ‘everything’ mean to you? It means a rugged, construction-grade frame built into an Ag disk. We figured if it’s good enough to stand up to the punishment of bigger commercial jobs, then it’s more than ready to handle your chores.

‘Everything’ also includes 17 dependable models to cover just about the entire range of today’s tillage operations. Why so many? That’s simple. Since not all jobs are the same, we made sure we considered every customer. Best of all, each disk offers the same high load absorption to take on your field conditions and your challenges, but with a variety of blade sizes, weights, and spacing’s to meet your specific needs.

Lastly, ‘everything’ includes you – an impressive lineup of disks mean nothing if our customers can’t afford them. So Frontier made sure that these disks not only perform well, but also work well within your budget. Affordability for you means…well, ‘everything’ to us.

Whether you’re mixing soil, renovating pasture, disking heavy residue or cutting down tough stubble, the Frontier Heavy Offset Disks are ready to take on any task and any application. What’s more, they plow through challenging field conditions without plugging or soil build-up.

Durability is never an issue with these battle-tested disks. The DH51, DH52 and DH53 Series are all designed with a sturdy construction frame so that you can tackle each job with more confidence, one to the next.

Smooth, high-performing disks to break through hard, compacted soil

The better you design a disk, the better the performance. That’s why Frontier Tandem Disks feature a weight-per-blade of 309 to 370 pounds, a penetration depth of nine inches, 10.5-inch blade spacing, and 26- to 28-inch diameter blades, to give you everything you need for quality results.

Tandem DisksAll-purpose disks with attitudeWhat’s in your field? Heavy residue and hard ground? Wet, gummy soil, perhaps? Or maybe rocks, debris, and other obstructions? Regardless of your conditions, the Frontier TM51 Series Tandem Disks are exceptional when it’s time to really dig in on a tough day’s work. But it’s not all power and performance…it’s so much more.

Five sturdy models made of high-strength tubular steel set this family of disks apart from the rest. Each model is ready to take a huge pounding, and eager to give it back. Massive blades let you muscle through large operations, with all the essentials of a high-impact disk, like ample weight-per-blade and large blade diameters. You’ll experience the kind of penetration reserved for only the most aggressive tillage tools.

Plus, Frontier Tandem Disks offer greater manueverability. The hydraulic folding wings make it quick and simple to get these disks through narrow roadways. And a lower transport height gives you some much-needed breathing room under bridges and overheads.

Bottom line: they’re not just field-proven, they’re all-around proven! So go ahead and take these disks out on your next job, preferably a tough one. It’s what they were made for.

Built with one of the toughest frames you’ll find on a disk, and hydraulically folding wings, the TM51 Series comes stacked with a frame that’s not only stable and long-lasting, but convenient and time-saving as well.

Frontier Tandem Disks are the ultimate in soil management. They mix and bury a variety of residue, from light and loose to hard and heavy residue. Whether it’s corn or soybean fields, cane or cotton stubble, these disks meet the job head on.

www.BuyFrontier.com

All the features you need for taking on the toughest applicationsDetails – Frontier Heavy Offset and Tandem Disks

Whether you prefer smooth blades for a clean, flush cut…or notched blades for more forceful penetration, these disk blades can be ordered with two concavities to choose from – a shallow concave for better penetration and less soil throw, or a deeper concave to bury more residue.

From the factory to the field When you purchase a Frontier disk, you can be certain that it’s built to withstand the toughest conditions – job after job, year after a year.

That’s because we’ve included the features that make a great disk…well, great. This way you get the productivity you demand, every time. From the heavy-duty frames, to the massive weight on each blade, the Frontier Heavy Offset and Tandem Disks offer one thing above all else: quality.

And when we say “quality,” we’re talking quality parts, quality assembly, and quality performance. Read more about the dependable features that are built into our disks. You’ll see why we stand by the promise of ‘rugged, reliable, and ready’. Visit your local John Deere dealer, your exclusive source of Frontier Equipment, for more information, or for sales and support.

Fully adjustable blade scrapers prevent wear when working in light dry soil, and allow non-stop disking even in wet, sticky soil.

End washers help to keep the gang shaft end nut tightly fastened on the blade while working.

A sturdy, adjustable level-lift hitch preserves balance and direction for even greater tillage results. Instead of transferring weight to your tractor, the hitch ensures that the weight stays on the disk blades. Plus, this design lets you make short, tight turns while maintaining excellent blade penetration.

The front hitch is designed with a heavy-duty cast so it won’t wear out. Best of all, you get proper pull of the disk for more consistent performance in your operation.

Tapered dual roller bearings, an important feature in giving Frontier Disks incredible durability, are enclosed in an oil-bath case to keep out dirt and debris for longer wear life and maintained performance.

For added stability, Frontier disks are equipped with a durable spool that fits within the curve of the disk blade to ensure that the gangs stay tight and secure.

Use the rear hitch to pull an additional attachment – like a secondary tillage tool, such as a harrow – to maximum your productivity.

All the features you need for taking on the toughest applications

Change gang angle to match your field conditions. Increase the angle to be more aggressive in heavy residue, or reduce gang angle when operating in lighter soils.

This handy gang wrench (seen here in storage position) is ideal for checking torque on the gangs and making sure they are tight for optimal performance.

When transporting the disk, the leveling linkage keeps the machine level from front to rear so there’s no damage to the disk blades. In working position, the linkage promotes stability over rough terrain for a smooth, consistent soil profile.

Tandem flotation tires provide level disking depth to give you a smooth soil profile, and improved weight distribution for a steadier ride during transport.

Our over-center locking wing design, used on the 21- to 24-foot offset disks, helps to ensure a level soil surface by preventing the wings from flexing up during operation.

To set blade depth, use the hydraulic lift cylinder. Convenient cylinder-stops keep the disks wheels from raising too high and prevent the blades from setting too deep (inset of cylinder-stops shown in storage position).

Additional Details – Tandem Disks (TM51 Series only)

Frontier Tandem Disks feature dual folding cylinders, enabling the left and right sides of the frame to hydraulically fold over center. With this compact fold, you have a more narrow transport width.

Hydraulic wing control valve allows varying hydraulic pressure to the wing-fold cylinders, which transfers weight from the mainframe to the wings for improved penetration in hard ground or heavy soil.

The TM51 Series offers an offset tandem formation to give you more coverage on each pass, with no need for a middle buster.

www.BuyFrontier.com

Specifications

Model #'s DH5108 DH51110 DH5112 DH5114 DH5116 DH5210 DH5212 DH5214 DH5216 DH5217 DH5219 DH5221 DH5221F

Duty Class General Purpose General Purpose General Purpose General Purpose General Purpose Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty

Working Width 8 ft. (2.4 m) 10 ft. (3 m) 12 ft. (3.7 m) 14 ft. (4.3 m) 16 ft. (4.9 m) 10 ft. (3 m) 12 ft. (3.7 m) 14 ft. (4.3 m) 16 ft. (4.9 m) 17 ft. (5.9 m) 19 ft. (5.8 m) 21 ft. (6.4 m) 20.75 ft. (6.3 m)

Transport Width 9 ft. (2.7 m) 11 ft. (3.4 m) 13 ft. (4 m) 15 ft. (4.6 m) 17 ft. (5.2 m) 11 ft. (3.4 m) 13 ft. (4 m) 15 ft. (4.6 m) 17 ft. (5.2 m) 18 ft. (5.5 m) 20 ft. (6.1 m) 22 ft. (6.7 m) 22 ft. (6.7 m)

Operating Weight 5,500 lb. (2,494.8 kg) 5,925 lb. (2,687.5 kg) 6,365 lb. (2,887.1 kg) 7,700 lb. (3,492.7 kg) 8,500 lb. (3,855.5 kg) 7,170 lb. (3,252.3 kg) 7,690 lb. (3,488.1 kg) 8,500 lb. (3,855.5 kg) 10,100 lb. (4,581.3 kg) 10,550 lb. (4,785.4 kg) 11,050 lb. (5,012.2 kg) 11,700 lb. (5,307 kg) 14,100 lb. (6,395 kg)

Weight Per Disk Blade 323 lb. (146.5 kg) 282 lb. (127.9 kg) 255 lb. (115.7 kg) 248 lb. (112.5 kg) 242 lb. (109.8) 341 lb. (154.7 kg) 308 lb. (139.7 kg) 274 lb. (124.3 kg) 288 lb. (130.6 kg) 270 lb. (122.5 kg) 257 lb. (116.6 kg) 249 lb. (112.9 kg) 300 lb. (136 kg)

Number of Blades 19 23 27 33 37 23 27 33 37 41 45 49 49

Maximum Penetration 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm) 9 in. (22.9 cm)

Drawbar Horsepower Requirements 80-90 HP (60-67 kW) 90-110 (67-82 kW) 110-135 HP (82-101 kW) 140-160 HP (104-119 kW) 160-180 HP (119-134 kW) 100-120 HP (75-90 kW) 110-135 HP (82-101 kW) 125-155 HP (93-116 kW) 150-165 HP (112-123 kW) 160-180 HP (119-135 kW) 170-200 HP (127-149 kW) 180-210 HP (134-157 kW) 180-220 HP (134-164 kW)

PTO Horsepwer Requirements 94-106 HP (70-79 kW) 106-129 HP (79-96 kW) 129-159 HP (96-118 kW) 165-188 HP (123-140 kW) 188-212 HP (140-158 kW) 118-141 HP (88-105 kW) 129-159 HP (96-118 kW) 147-182 HP (110-136 kW) 176-194 HP (132-145 kW) 188-212 HP (140-158 kW) 200-235 HP (149-175 kW) 212-247 HP (???) 212-259 HP (158-193 kW)

Front Hitch Type Spade Spade Spade Spade Spade Spade Spade Spade Spade Spade Spade Spade Spade

Blade Spacing 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm)

Blade Type

Notched (front)/Notched (rear) Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Stanard Stanard

Smooth (front)/Smooth (rear) Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional

Notched (front)/Smooth (rear) Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional

Blade Option 1 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm)

Blade Option 2 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm)

Blade Option 3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

Frame Type Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Folding

Wheel Hub Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings Dual Tapered Roller Bearings

Tires 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement 4 - Implement

Tire Size 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply

Tire Wheel Hub Type 6-bolt 6-bolt 6-bolt 6-bolt 6-bolt 8-bolt 8-bolt 8-bolt 8-bolt 8-bolt 8-bolt 8-bolt 8-bolt

Disks Gang Axle Size 1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

Model #'s DH5222F DH5224F DH5308 DH5310 DH5312 DH5314 DH5316 TM5118 TM5120 TM5121 TM5124 TM5129 TM5132

Duty Class Medium-Duty Medium-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose

Working Width 22.33 ft. (6.8 m) 24 ft. (7.3 m) 8 ft. (2.4 m) 10 ft. (3 m) 12 ft. (3.7 m) 14 ft. (4.3 m) 16 ft. (4.9 m) 18 ft. (5.5 m) 19.5 ft. (5.9 m) 21 ft. (6.4 m) 23.5 ft. (7.2 m) 29 ft. (8.8 m) 32 ft. (9.8 m)

Transport Width 23 ft. (7 m) 25 ft. (7.6 m) 9 ft. (2.7 m) 11 ft. (3.4 m) 13 ft. (4 m) 15 ft. (4.6 m) 17 ft. (5.2 m) 13.67 ft. (4.2 m) 13.67 ft. (4.2 m) 13.67 ft. (4.2 m) 13.67 ft. (4.2 m) 19.25 ft. (5.9 m) 19.25 ft. (5.9 m)

Operating Weight 14,550 lb. (6,600 kg) 15,000 lb. (6,804 kg) 8,000 lb. (3,628.7 kg) 8,525 lb. (3,866.9 kg) 9,140 lb. (4,145.8 kg) 10,450 lb. (4,740 kg) 11,100 lb. (5,034.9 kg) 15,500 lb. (7,030.7 kg) 15,850 lb. (7,189.4 kg) 16,100 lb. (7,302.8 kg) 17,920 lb. (7,842.6 kg) 22,000 lb. (9,979 kg) 24,100 lb. (10,931.6 kg)

Weight Per Disk Blade 285 lb. (129 kg) 273 lb. (124 kg) 533 lb. (241.8 kg) 449 lb. (203.7 kg) 397 lb. (180.1 kg) 362 lb. (164.2 kg) 337 lb. (152.9 kg) 369 lb. (167.4 kg) 345 lb. (156.5 kg) 322 lb. (146.1 kg) 320 lb. (145.1 kg) 314 lb. (142.4 kg) 309 lb. (140.2 kg)

Number of Blades 53 57 17 21 25 29 33 46 50 54 58 74 82


Drawbar Horsepower Requirements 190-240 HP (142-179 kW) 200-260 HP (149-194 kW) 100-130 HP (75-97 kW) 120-150 HP (90-112 kW) 140-170 HP (104-127 kW) 170-200 HP (127-149 kW) 180-210 HP (134-157 kW) 160-180 HP (119-134 kW) 170-200 HP (127-149 kW) 190-210 HP (142-157 kW) 220 HP (164 kW) minimum 260 HP (194 kW) minimum 280 HP (209 kW) minimum

PTO Horsepwer Requirements 224-282 HP (167-211 kW) 235-306 HP (175-228 kW) 118-153 HP (88-114 kW) 141-176 HP (105-132 kW) 165-200 HP (123-149 kW) 200-235 HP (149-175 kW) 212-247 HP (158-184 kW) N/A N/A N/A N/A N/A N/A


Blade Spacing 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm)

Blade Type

Notched (front)/Notched (rear) Stanard Stanard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard

Smooth (front)/Smooth (rear) Optional Optional N/A N/A N/A N/A N/A Optional Optional Optional Optional Optional Optional

Notched (front)/Smooth (rear) Optional Optional N/A N/A N/A N/A N/A Optional Optional Optional Optional Optional Optional

Blade Option 1 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm)

Blade Option 2 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm)

Blade Option 3 N/A N/A 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) N/A N/A N/A N/A N/A N/A

Frame Type Single Offset Folding Single Offset Folding Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Tandem Double Offset Tandem Double Offset Tandem Double Offset Tandem Double Offset Tandem Double Offset Tandem Double Offset



Tire Size 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply


Disks Gang Axle Size 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

Specifications

Model #'s DH5108 DH51110 DH5112 DH5114 DH5116 DH5210 DH5212 DH5214 DH5216 DH5217 DH5219 DH5221 DH5221F

Duty Class General Purpose General Purpose General Purpose General Purpose General Purpose Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty Medium-Duty

Working Width 8 ft. (2.4 m) 10 ft. (3 m) 12 ft. (3.7 m) 14 ft. (4.3 m) 16 ft. (4.9 m) 10 ft. (3 m) 12 ft. (3.7 m) 14 ft. (4.3 m) 16 ft. (4.9 m) 17 ft. (5.9 m) 19 ft. (5.8 m) 21 ft. (6.4 m) 20.75 ft. (6.3 m)

Transport Width 9 ft. (2.7 m) 11 ft. (3.4 m) 13 ft. (4 m) 15 ft. (4.6 m) 17 ft. (5.2 m) 11 ft. (3.4 m) 13 ft. (4 m) 15 ft. (4.6 m) 17 ft. (5.2 m) 18 ft. (5.5 m) 20 ft. (6.1 m) 22 ft. (6.7 m) 22 ft. (6.7 m)

Operating Weight 5,500 lb. (2,494.8 kg) 5,925 lb. (2,687.5 kg) 6,365 lb. (2,887.1 kg) 7,700 lb. (3,492.7 kg) 8,500 lb. (3,855.5 kg) 7,170 lb. (3,252.3 kg) 7,690 lb. (3,488.1 kg) 8,500 lb. (3,855.5 kg) 10,100 lb. (4,581.3 kg) 10,550 lb. (4,785.4 kg) 11,050 lb. (5,012.2 kg) 11,700 lb. (5,307 kg) 14,100 lb. (6,395 kg)

Weight Per Disk Blade 323 lb. (146.5 kg) 282 lb. (127.9 kg) 255 lb. (115.7 kg) 248 lb. (112.5 kg) 242 lb. (109.8) 341 lb. (154.7 kg) 308 lb. (139.7 kg) 274 lb. (124.3 kg) 288 lb. (130.6 kg) 270 lb. (122.5 kg) 257 lb. (116.6 kg) 249 lb. (112.9 kg) 300 lb. (136 kg)

Number of Blades 19 23 27 33 37 23 27 33 37 41 45 49 49


Drawbar Horsepower Requirements 80-90 HP (60-67 kW) 90-110 (67-82 kW) 110-135 HP (82-101 kW) 140-160 HP (104-119 kW) 160-180 HP (119-134 kW) 100-120 HP (75-90 kW) 110-135 HP (82-101 kW) 125-155 HP (93-116 kW) 150-165 HP (112-123 kW) 160-180 HP (119-135 kW) 170-200 HP (127-149 kW) 180-210 HP (134-157 kW) 180-220 HP (134-164 kW)

PTO Horsepwer Requirements 94-106 HP (70-79 kW) 106-129 HP (79-96 kW) 129-159 HP (96-118 kW) 165-188 HP (123-140 kW) 188-212 HP (140-158 kW) 118-141 HP (88-105 kW) 129-159 HP (96-118 kW) 147-182 HP (110-136 kW) 176-194 HP (132-145 kW) 188-212 HP (140-158 kW) 200-235 HP (149-175 kW) 212-247 HP (???) 212-259 HP (158-193 kW)


Blade Spacing 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm)

Blade Type

Notched (front)/Notched (rear) Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Stanard Stanard

Smooth (front)/Smooth (rear) Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional

Notched (front)/Smooth (rear) Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional Optional

Blade Option 1 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm)

Blade Option 2 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm)

Blade Option 3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A

Frame Type Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Folding



Tire Size 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 9.5L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply


Disks Gang Axle Size 1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

Model #'s DH5222F DH5224F DH5308 DH5310 DH5312 DH5314 DH5316 TM5118 TM5120 TM5121 TM5124 TM5129 TM5132

Duty Class Medium-Duty Medium-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty Heavy-Duty General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose

Working Width 22.33 ft. (6.8 m) 24 ft. (7.3 m) 8 ft. (2.4 m) 10 ft. (3 m) 12 ft. (3.7 m) 14 ft. (4.3 m) 16 ft. (4.9 m) 18 ft. (5.5 m) 19.5 ft. (5.9 m) 21 ft. (6.4 m) 23.5 ft. (7.2 m) 29 ft. (8.8 m) 32 ft. (9.8 m)

Transport Width 23 ft. (7 m) 25 ft. (7.6 m) 9 ft. (2.7 m) 11 ft. (3.4 m) 13 ft. (4 m) 15 ft. (4.6 m) 17 ft. (5.2 m) 13.67 ft. (4.2 m) 13.67 ft. (4.2 m) 13.67 ft. (4.2 m) 13.67 ft. (4.2 m) 19.25 ft. (5.9 m) 19.25 ft. (5.9 m)

Operating Weight 14,550 lb. (6,600 kg) 15,000 lb. (6,804 kg) 8,000 lb. (3,628.7 kg) 8,525 lb. (3,866.9 kg) 9,140 lb. (4,145.8 kg) 10,450 lb. (4,740 kg) 11,100 lb. (5,034.9 kg) 15,500 lb. (7,030.7 kg) 15,850 lb. (7,189.4 kg) 16,100 lb. (7,302.8 kg) 17,920 lb. (7,842.6 kg) 22,000 lb. (9,979 kg) 24,100 lb. (10,931.6 kg)

Weight Per Disk Blade 285 lb. (129 kg) 273 lb. (124 kg) 533 lb. (241.8 kg) 449 lb. (203.7 kg) 397 lb. (180.1 kg) 362 lb. (164.2 kg) 337 lb. (152.9 kg) 369 lb. (167.4 kg) 345 lb. (156.5 kg) 322 lb. (146.1 kg) 320 lb. (145.1 kg) 314 lb. (142.4 kg) 309 lb. (140.2 kg)

Number of Blades 53 57 17 21 25 29 33 46 50 54 58 74 82


Drawbar Horsepower Requirements 190-240 HP (142-179 kW) 200-260 HP (149-194 kW) 100-130 HP (75-97 kW) 120-150 HP (90-112 kW) 140-170 HP (104-127 kW) 170-200 HP (127-149 kW) 180-210 HP (134-157 kW) 160-180 HP (119-134 kW) 170-200 HP (127-149 kW) 190-210 HP (142-157 kW) 220 HP (164 kW) minimum 260 HP (194 kW) minimum 280 HP (209 kW) minimum

PTO Horsepwer Requirements 224-282 HP (167-211 kW) 235-306 HP (175-228 kW) 118-153 HP (88-114 kW) 141-176 HP (105-132 kW) 165-200 HP (123-149 kW) 200-235 HP (149-175 kW) 212-247 HP (158-184 kW) N/A N/A N/A N/A N/A N/A


Blade Spacing 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 12 in. (30.5 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm) 10.5 in. (26.7 cm)

Blade Type

Notched (front)/Notched (rear) Stanard Stanard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard

Smooth (front)/Smooth (rear) Optional Optional N/A N/A N/A N/A N/A Optional Optional Optional Optional Optional Optional

Notched (front)/Smooth (rear) Optional Optional N/A N/A N/A N/A N/A Optional Optional Optional Optional Optional Optional

Blade Option 1 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 28 x .375 in. (71.1 x 1 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm) 26 x .312 in. (66 x 0.8 cm)

Blade Option 2 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 30 x .375 in. (76.2 x 1 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm) 28 x .312 in. (71.1 x 0.8 cm)

Blade Option 3 N/A N/A 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) 32 x .375 in. (81.3 x 1 cm) N/A N/A N/A N/A N/A N/A

Frame Type Single Offset Folding Single Offset Folding Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Single Offset Rigid Tandem Double Offset Tandem Double Offset Tandem Double Offset Tandem Double Offset Tandem Double Offset Tandem Double Offset



Tire Size 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 12.5L x 15 in. (38.1 cm) 10 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply 11L x 15 in. (38.1 cm) 8 ply


Disks Gang Axle Size 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 2.5 in. (6.35 cm) 1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

1.625 or 2.125 in. (4.1275 or 5.3975 cm)

www.BuyFrontier.com

This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may include finance, credit, insurance, product options, and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL JOHN DEERE DEALER FOR DETAILS. Frontier Equipment reserves the right to change specifications, design and price of products described in this literature without notice. John Deere, the leaping deer symbol, and John Deere’s green and yellow trade dress are the trademarks of Deere & Company. Copyright 2011, Frontier Equipment.

DSFE46542 Litho in U.S.A. (11-04)

www.BuyFrontier.com

Frontier Disks Aggressive and no-nonsense…like a disk should be.

To order this literature from JDPoint, please use the following part number: 5KBDSFE46452

The End Result Matters

Tandem DisksNot every job is the same, and not every operator is the same. For customers who prefer a rugged, high-powered disk harrow with the convenience of quick and easy folding, Frontier presents the TM51 Series Tandem Disks.

Size large tillage projects up with this groundbreaking workhorse. Thick, compacted soil is no match for the heavy-duty frame, massive blades, and aggressive penetration. With five durable models to choose from, you can’t go wrong.

The TM51 Series is all-purpose…and always ready. Once the job is done, going from field to storage is a breeze. Hydraulic folding wings let you transport the disk through narrow widths. And because folding is quick, you can go from working one site to disking another with minimal downtime, making your day shorter and much easier.

Heavy Offset DisksYou spend enough time, fuel, and energy covering acres on one pass. You shouldn’t have to come back and do a second pass.

Frontier Heavy Offset Disks offer the confidence you want when you hit the field. Go with the DH51 Series for superior penetration and soil mixing. Or check out the Frontier DH52 Series, designed with a heavier frame to give you more weight and support for tackling a wider variety of tillage jobs with ease. If that’s not enough, the DH53 Series provides even more productivity for managing heavier residue and tougher soil conditions.

No matter the model, when you choose a Frontier Heavy Offset Disk, you’re working with a professional tillage tool, so you can expect professional results.

Documents

Frontier Disks - John Deere Disk_v… · Frontier Disks Heavy Offset Disks Tandem Disks. Smooth, high-performing disks to break through hard, compacted soil With a weight-per-blade