Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Main Applications:• 50/60/400Hz conversions• Transformer tests• tests of motors and pumps
• 1 and 3 Phase Output• Output Power: 3kVA - 1.000kVA• Output Voltage: up to 1000V L-L• Output Frequency: 40Hz - 200Hz Other Versions: 15Hz - 80Hz 200Hz - 350Hz 350Hz - 450Hz
• Overload Capability up to 200%• Low output distortion• Custom specific designs• RS232/RS485 interface standard,
USB/LAN/Fiber Optic optional
• Windows® Software FVC-Manager
Description and Application
Three-phase frequency and voltage converters for manual and automatic test benches and measurement labs
Frequency converters of the FVC Series are very robust, cost af-fordable and easy to use equipments developed especially for in-tensive use in production and testing lines, as well as in research and development labs.The converters provide a symmetrical, balanced and regulated three-phase sinusoidal voltage with the possibility to vary volt-age and frequency. Models ranging from 3kVA up to 1000kVA allow to test low, medium and high power equipments that can not be supplied by conventional grids and create patterns of voltage suitable for testing the limits of operation. They can also be simply used as voltage regulators. All devices are suitable for medium and high power applications offering an excellent price/performance ratio. Typical applications are 50/60/400Hz conver-sions, transformer tests, motor or pump testing etc.The output waveform is sinusoidal with low harmonic distortion of less than 0.5% even in the presence of asymmetrical loads. FVC frequency converters can work with resistive, inductive and capacitive loads.The presence of electromechanically selectable output ranges allows to adapt the equipment to different requirements, allow-ing to use all the power at various full ranges without having to pena- lize heavily the power output.
The output voltage is continuously adjustable from 0 to full scale, feedback is done on each single phase and external sensing is standard on every equipment. The output voltage accuracy is 2% and the recovery time for a 50% load change is about 2ms.The output frequency in the standard models ranges from 40Hz to 200Hz, continuously adjustable in increments of 0.1 Hz. Mod-els with a frequency range up to 450Hz (suitable for avionic ap-plications) or down to 15Hz (typically for railway applications) are available as well.FVC converters are three-phase systems. Single phase operation with reduced power is possible by connecting the DUT between one output phase and neutral, or between two phases. Single phase units are available with an output power from 3 to 30kVA.The overload capability of the FVC Series up to 200% of the nominal current is especially suited for the test of loads with high inrush current like for example motors or pumps.Automatic and remote operation is ensured via the standard an-alog and RS232/RS485 interfaces or optional USB, LAN and Fiber Optic interfaces.
Italy: Zenone Elettronica s.r.l.TEL: +39 08 2544 9171
[email protected] | www.zenoneelettronica.it
Germany: Caltest Instruments GmbHTEL: +49(0)7842-99722-00
[email protected]: +49(0)7842-99722-29www.caltest.de
||
Frequency ConvertersFVC Series
FVC 30kVA
Output Specifications
Output voltage 1000V L-L
Minimal regulated voltage 0V
Waveform Sinusoidal
Voltage accuracy typ. 2% of FS
Output voltage ranges 1 (std) or 2 (optional)
Output frequency BF: 40-200Hz, MF: 200-350Hz,HF: 350-450Hz, opt.: 15-80Hz
Frequency resolution 0.01Hz
Frequency accuracy 0.15%
Line regulation typ. 1% FS
Load regulation typ. 1% FS
Linearity typ. 0.5% FS
DC offset 0, output is transformer-coupled
Max HF residual ripple/distortion typ. 0.5% of FS
Output connection internal terminals or output cable with CEE-connector
Max output power continuous 1000kVA
Max output power overload 120% or 200% for 1 min
Number of phases std. 3, 1-phase models up to 30kVA
Output current continuous depending on power
Max output current overload depending on power
Peak output current depending on power
Maximum time of overload at Ipeek 1 Minute
Minimum setting voltage 0V
Settling time for 50% load change 2ms
THD at 50-60Hz 0.5%
Output THD @ 400Hz typ. 3-4%
Senses internal & external
Permissible power factor from 0.2 to 1
Protection and safety Over-current, short-circuit, overtemperature
Interfaces
Controls on the front Line MCB, Push-button run-stop, Voltage adjustment 10 turn potentiometer, Fre-
quency adjustment 10 turn potentiometer, Emergency push-button
Voltage adjustment manual or 0-10V / serial (RS232/RS485)
Frequency adjustment manual or 0-10V / serial (RS232/RS485)
Run - Stop 24Vdc / serial
External emergency L.V. N.C. voltage free circuit guard
Communication interface RS232/RS485 std.;USB, LAN, Fiber Optic opt.
Analog inputs 0-10V for voltage and frequency
Input Specifications
Line voltage 3 phase / 400V 3F
Line frequency 45-65Hz
Connection to the line internal terminals or power supply cable with CEE-connector
Max compensation voltage 10% f.s.
Max cable length 100m
Line protection Automatic MCB
Other
Operating temperature 5-4o°C
Storage temperature -5-60°C
Dimensions electrical cabinets
Weight depending on power
Safety and EMC CE (EMC & LVDT)
Protection rating std. IP20B; other IP on request
Cooling Forced Air
Measurements Output voltage R, S, T; Output current R, S, T; Output frequency
Displays 3.5 digit digital voltage display3.5 digit digital current & frequency display
Acoustic noise at 1m typ. 65dBA
Line / output - gnd isolation 2500Vrms
Output / gnd isolation 1500Vrms
Max operation voltage each output to gnd
depending on output voltage
Permissible operating altitude
max. 1000m
Paint finish RAL7035
Standard Delivered Items
FVC converter, English manuals, Compliance and calibration certificate, CE conformity document
Frequency ConvertersFVC Series
Italy: Zenone Elettronica s.r.l.TEL: +39 08 2544 9171
[email protected] | www.zenoneelettronica.it
Germany: Caltest Instruments GmbHTEL: +49(0)7842-99722-00
[email protected]: +49(0)7842-99722-29www.caltest.de
||
Specifications
FVC 250 kVA
FVC-Software
Available Standard Models (Extract)
Name Description
/M-FVC-SW Management Software
/PID PID software
/Wheels Cabinet with wheels, max weight 800kg
/USB USB interface
/LAN LAN interface
/FO Fiber Optic interface
/Vxxxx Special output Voltage range (P.E. V900 = 900V f.s.)
/IP Special IP protection
/LabVIEW® LabVIEW® Drivers
Frequency ConvertersFVC Series
Every standard model available with:• Output Voltage: up to 1000V L-L• Overload: 120 or 200%• Frequency: BF (40-200Hz), MF (200-350Hz) or HF (350-450Hz)
The optional FVC-Software allows to remote the FVC Series through various available interfaces.
Italy: Zenone Elettronica s.r.l.TEL: +39 08 2544 9171
[email protected] | www.zenoneelettronica.it
Germany: Caltest Instruments GmbHTEL: +49(0)7842-99722-00
[email protected]: +49(0)7842-99722-29www.caltest.de
||
Options
More models available with up to 1000kVA.1- and 3-phase versions available with one or two ranges.Specific versions on request.
Over-load(1min)
Output Power
Over-load Power
500V Models 700V Models
Model
Vmax / Imax Overload Vmax / Imax
Model
Vmax / Imax Overload Vmax / Imax
Range 1 Range 2 Range 1 Range 2 Range 1 Range 2 Range 1 Range 2120% 3kVA 3,6kVA FVCT500V-3kVA-2-
BF-OVL120%250V / 6.9A
500V / 3.5A
250V / 8.5A
500V / 4.2A
FVCT700V-3kVA-2-BF-OVL120%
350V / 5A
700V / 2.5A
350V / 6A
700V / 3A
5kVA 6kVA FVCT500V-5kVA-2-BF-OVL120%
250V / 12A
500V / 5.8A
250V / 14A
500V / 7A
FVCT700V-5kVA-2-BF-OVL120%
350V / 8.3A
700V / 4.1A
350V / 9.9A
700V / 4.9A
7,5kVA 9kVA FVCT500V-7,5kVA-2-BF-OVL120%
250V / 17A
500V / 8.7A
250V / 21A
500V / 11A
FVCT700V-7,5kVA-2-BF-OVL120%
350V / 12A
700V / 6.2A
350V / 14A
700V / 7.1A
10kVA 12kVA FVCT500V-10kVA-2-BF-OVL120%
250V / 23A
500V / 12A
250V / 28A
500V / 14A
FVCT700V-10kVA-2-BF-OVL120%
350V / 17A
700V / 8.3A
350V / 21A
700V / 9.9A
15kVA 18kVA FVCT500V-15kVA-2-BF-OVL120%
250V / 35A
500V / 17A
250V / 42A
500V / 21A
FVCT700V-15kVA-2-BF-OVL120%
350V / 25A
700V / 12A
350V / 30A
700V / 14A
20kVA 24kVA FVCT500V-20kVA-2-BF-OVL120%
250V / 46A
500V / 23A
250V / 55A
500V / 28A
FVCT700V-20kVA-2-BF-OVL120%
350V / 33A
700V / 17A
350V / 40A
700V / 21A
30kVA 36kVA FVCT500V-30kVA-2-BF-OVL120%
250V / 69A
500V / 35A
250V / 83A
500V / 42A
FVCT700V-30kVA-2-BF-OVL120%
350V / 50A
700V / 25A
350V / 60A
700V / 30A
40kVA 48kVA FVCT500V-40kVA-2-BF-OVL120%
250V / 92A
500V / 46A
250V / 111A
500V / 55A
FVCT700V-40kVA-2-BF-OVL120%
350V / 66A
700V / 33A
350V / 79A
700V / 40A
60kVA 72kVA FVCT500V-50kVA-2-BF-OVL120%
250V / 139A
500V / 69A
250V / 167A
500V / 83A
FVCT700V-50kVA-2-BF-OVL120%
350V / 99A
700V / 50A
350V / 119A
700V / 60A
80kVA 96kVA FVCT500V-60kVA-2-BF-OVL120%
250V / 185A
500V / 92A
250V / 222A
500V / 111A
FVCT700V-60kVA-2-BF-OVL120%
350V / 132A
700V / 66A
350V / 158A
700V / 79A
100kVA 120kVA FVCT500V-100kVA-2-BF-OVL120%
250V / 231A
500V / 116A
250V / 277A
500V / 139A
FVCT700V-100kVA-2-BF-OVL120%
350V / 165A
700V / 83A
350V / 198A
700V / 99A
120kVA 144kVA FVCT500V-120kVA-2-BF-OVL120%
250V / 277A
500V / 139A
250V / 333A
500V / 167A
FVCT700V-120kVA-2-BF-OVL120%
350V / 198A
700V / 99A
350V / 238A
700V / 119A
150kVA 180kVA FVCT500V-150kVA-2-BF-OVL120%
250V / 347A
500V / 173A
250V / 416A
500V / 208A
FVCT700V-150kVA-2-BF-OVL120%
350V / 248A
700V / 124A
350V / 298A
700V / 149A
250kVA 300kVA FVCT500V-250kVA-2-BF-OVL120%
250V / 578A
500V / 289A
250V / 694A
500V / 347A
FVCT700V-250kVA-2-BF-OVL120%
350V / 413A
700V / 206A
350V / 496A
700V / 248A
Other Products
Model / Order Example
CT
I
Caltest Instruments GmbHKohlmattstrasse 7
D-77876 [email protected]
Tel: +49(0)7842-99722-00Fax: +49(0)7842-99722-29www.caltest.de
Current Generators, 1Φ and 3Φ
• GI Series: AC current generators up to 50kA / 1000kVA / 40-200Hz• GIS Series: AC and DC current generators up to 5kA / 80kVA /
DC...10-800Hz• Typical Applications: - Thermical and magnetical tests of switches, breakers, relays, fuses with trip-time measurements - Heating tests of electrical contacts - Tests of coils and transformers - Tests and calibration of measurement instruments
DC Power Sources for medium and high power applications: AL3000 Series
• Output voltage: 5VDC to 1200VDC• Output power: 2kW to 1000kW• Output current: 10A to 10000A• Operation in CV/CC/CP mode• Fully bidirectional versions AL3000R Series
Frequency ConvertersFVC Series
Founded in 1990 in Mirabella, Italy, by engineers with many years of experience in the power electronic industry, Zenone Elettronica has quickly become a leader in the design and manufacturing of complex power electronic systems with a high level of technology.With the focus in converting static energy of medium and high power, the current product program includes:- Static AC and DC current generators up to 50 kA- Single and three-phase frequency converters up to 1 MVA- Single and three phase programmable AC sources up to 1MVA- High Power DC Power Supplies up to 1200V and 1MW- High Power Bidirectional DC Power Supplies- AC loads up to 500kVA
© 2016 Zenone Elettronica. V4-January16. Subject to change without notice.
DC-Source AL3000
GI AC-Current Generator
GIS AC&DC-Current Generator
About Zenone Elettronica
FVCT690V-90KVA-1-BF-OVL120%
Series
Output voltage V L-L(up to 1000V L-L) Permanent output power
(5kVA up to 1000kVA)
Number of voltage ranges(1 or 2)
Frequency(BF = 40-200Hz, MF = 200-350Hz, HF = 350-450Hz, optional 15-80Hz)
Overload capability (1min)(120% or 200%)
Number of phases(M = 1 phase, T = 3 phases)