Frequencies For SNW, SS3Ni, SS7Ni, S5N and SS5Ni + How To enter it Manually Into decoders

2/22/2015 FrequenciesForSNW,SS3Ni,SS7Ni,S5NandSS5Ni+HowToenteritManuallyIntodecoders

http://www.lemmymorgan.com/frequenciesforsnwss3niss7nis5nandss5nihowtoenteritmanuallyintodecoders/ 1/18

Search

You are here: Home / Satellite TV Tutorials / Frequencies For SNW, SS3Ni, SS7Ni, S5N and SS5Ni + How To enter it Manually

Into decoders

Frequencies For SNW, SS3Ni, SS7Ni, S5N and SS5Ni +How To enter it Manually Into decodersDecember 30, 2014 By lemmy 107 Comments

Another article that is long overdue. Dont mind e, I over ate Christmas rice and became so lazy and tire.Amusing this medium to wish all my esteem followers a merry Christmas and a prosperous new year. As for myarticles and guides, it is better late than never. This is because no matter when i post an article, it will surelymake its impact. As at yesterday that I confirmed(even on Saturday) Only ss7ni was working on qsat out of thethree most important supersports channels; ss3ni, s5n/ss5ni and ss7ni. Also you should know that ss3, ss5 andss7 and ave not been showing and are still not showing on qsat. So we have the equivalent of ss3, ss5 and ss7on qsat as snw/ss3ni, ss5ni/s5n and ss7ni. Unfortunately only ss7ni is currently showing due to qsat internalproblems. However other channels like Africa magic, movies ss6 r.t.c are currently showing with amazingstability on qsat. Please dont bring your complain of yours not showing here, if your qsat is not currentlyopening any scrambled dst* channel, there are two things involved, it i either your avatarcam code is amongthe ones that are currently totally offline, or you you have not upgraded your decoder from my guided here

Now the issue at hand is that some section complaints that they lost at leat the following channels SNW/SS3Ni,SS7Ni, S5N/ SS5Ni on their qsat after upgrading their qsat with the latest available software. Well as mush as iwill say this is a bad loss because those are the channels that qsat currently decrypt for live soccer actiosintead of ss3, ss5 and ss7. I will also say that in 97% of the cases, you lost this channels due to badconfiguration after upgrade.

Get our updates deliveredstraight to your inbox...

Enter your email...

Signup Now!

Don't worry, we value your privacy andwill never spam you.

Recent Posts

My Hands ON G6 Lite HD MPEG-4 DV3 + GPRSCOMBO RECEIVER Feel the power of Ist Class Acct

DONGLES / IKS DECODERS UPDATES CHANGINGOF THE GUARDS

Azsky Releases New Recharge Tool V3.08 & v1.02For G1 Golden

Trendy Updates On Iks Decoders & Accounts February 2015

How To Configure Qsat Q26G and Activate ItsPreloaded Accounts

Download Xcam Setup /Spycam menu Software ForQsat Q26G

Updates On Current Status Of Dongles & IKSDecoders Jan / Feb 2015[A must Read]

Currently Working Iks Decoders Their Accounts &Packages

Why It Is Difficult To Recharge Azsky G1& XmanDongle & Possible solution

Dynamics Of New Qsat Avatarcam code with SixMonths Validity Period

Qsat Q26g Decoder Comes With Two Server For Dst*& Canal Now Available

January 2015 Update On Dongles & IKS Decoders Performance and Status

...

Home Forum Satellite TV Mobile Computers Contact Us About



NOTICE!! NOTICE!! NOTICE!! : SSN*** are originally designed for viewers in west Africa especially Nigeria. Youmay not get everything no matter what you do, if you are in east, North or South African Countries. Secondly,make sure you test you dish settings with another decoder and ascertain that it is not receiving the ssn***channels before you perform any of my tricks below.

IMPORTANT PER-REQUISITESAlways know that if you are using more than one dish, you wll have to setup your other dish by enablingthe disecq switch functionality within your decoder before blindscanning: yes if you dont setup yourdishes properly after a software upgrade that wiped off your settings and channels, you are likely going toget No channels scanned or only channels from one of your dishesPlease make sure you use blindscan on qsat as against auto scan and make sure network scan is turned offAnother thing is that, we have many q23g, and q13g that will simply refused to scan and save snw, ss3ni,s5n, ss7ni or s5n no matter the trick you useEntering the frequencies of the above channels will help you get the channels back on your qsat or anyother decoder for that matter however, this happens in 80% of cases on qsat so please if you do everythingon your qsat q23g, q13g, or speed hd s1 and yet those channels are not saved, it means something is wrongwith your decoder wich is beyond my resolution for now.

TP / FREQUENCIES FOR SNW, SS3Ni, ss5nI, SS7Ni and S5N

Method 1Read this guide and this on how to manually enter the frequencies on azsky G6 and Qsat decodersrespectively. Remember, the method of manually entering TP / Frequencies is similar with all decoders, justtry and get it right in your case.

1. ss7Ni : 11747 ( H )027500 (Or 27505)2. S5N : 11747 ( V ) 27500 (OR 27512)3. SNW : 11747 (H )275004. SS5Ni : 12207 ( H ) 274925. SS3Ni : 12207 ( H ) 27492

Input the above values in the manual scan / Add TP section of your decoder under tp list / antenna settings orinstallation as the case may be. the 3 distinct items above represents frequency, symbol rate and polarization

Method 2Another method you can use to get the channels back on Qsat is for you to backup the database of a workingqsat decoder that corresponds to your own mode, then use the software you backed up to upgrade your ownqsat. To put this clearer: I have a qsat q11g with all ssn channels working well with good signal, you also havea working qsat decoder with all channels available and working except ssn channels. simply backup up myown software and use it to upgrade your own qsat decoder. Please do this for qsat with same model numberse.g q13g to q13g , q15 to q15, q15g to q15g. Dont use q15 for q15g.

To learn how to backup the firmware and database of a qsat or speed hd decoder, read this

Method 3This was tested to be working by a fan:

You can remove your lnb cable from the the lnb in at the back of their qsat and fix it into lnb out and blindscan your decoder. It works perfectly too. Ss3ni and ss5ni will show up. And pay little or no attention to thesignal strength. It will show if qsat starts showing those channels.

Share this:

Twitter 4 Facebook 70 Google StumbleUpon More

Follow@lemmy28 2,254followers

Lemmy Morgan

Follow

LemmyMorgan2,336Like

Categories

Android Softwares

Android Tutorials

Apple iOS

Blackberry

Computer Tuts & Tweaks

India Free Browsing tricks

Internet & Tunnelling

Mobile Free Gprs Tricks

Mobile Games

Mobile Phones Review

Mobile Tutorials

Mobile Wifi

Nigeria Networks promo & freebees

Nokia S40



lemmy (621 Posts)Am a Fun blogger from Nigeria, and also a Student with an irrepressible flair for sharing any info i have onMobile Related Stuffs and Computer stuffs. My other area of interest is in Satellite television. You can followmy tweets on Twitter or add me to your circles on Google+! You can as well grab my feed and get updatesthrough email Google+

Filed Under: Satellite TV Tutorials

Likethisarticle?Pleaseshareonyoursocialnetwork.

Facebook Google+ Twitter Reddit LinkedIn Pinterest

Get our updates delivered straight to your inbox...

Enter your email...

Signup Now!

Don't worry, we value your privacy and will never spam you.

Comments

Bimbo Esq says:December 30, 2014 at 4:44 am

Merry xmas and prosperous new year to you, I thought snw i no longer available bcus no matter how iblindscan my decoder it doesnt come up.

Reply

dozie says:December 30, 2014 at 4:59 am

Thank u for the info, is there any new product from azsky that can open canalsat n dst* have heard aboutqsat q26g that opens canalsat n dst*

Reply

lemmy says:December 30, 2014 at 4:31 pm

@dozie, qsat q26g is not yet out.

Reply

Fred says:December 30, 2014 at 5:33 am

Greetings. Could you please state which codes are totally offline. Mine is 59 and i gave up on it long timeago, i even re-aligned my dish to 7E.

Reply

akty says:December 30, 2014 at 5:33 am

Nokia Symbian

other phones

Pc Application Reviews

Satellite TV Tutorials

social Network

Tech News

Uncategorized

Web Hosting

Windows Moble

Archives

Select Month



how can i blind scan my qsat q13g?,I upgraded my Qsat 13g,but It was unable display any channels?, plswhat can I do to resolve this problem?

Reply

NAM says:December 30, 2014 at 5:59 am

@lemmy. Please i used all de frequencies and am getin only SS7NI in all cases. Wat may be de problem ?

Reply

olaitan says:December 30, 2014 at 6:02 am

Tnks so much for the update Mr Lemmy,will do it right away.

Reply

abdul warru. says:December 30, 2014 at 6:03 am

well done mr lemmy,

Reply

peter says:December 30, 2014 at 6:10 am

Hello Lemmy,

On adding the specific TP settings, I can get the s7n and s5n but not s3n. Do I need to adjust the Lnb?

Reply


@peter, i dont think you need to adjust anything. please test your dish with another decoder and see ifit gets all channels

Reply

issabella says:December 30, 2014 at 6:29 am

lemmy,pls,what is happening to Aone??its freezess badly and dont open some channels as well.its alsodelays when u change channels.Too bad for A1 team.They should step up their game or else they will loseall of us

Reply

Bolanle ayodeji says:December 30, 2014 at 8:05 am

Pls, how can I tweak dstv decoders to get live soccer stations. Thanks for your regular update.

Reply

Larbi says:December 30, 2014 at 8:06 am



Lemmy pls hw can i manually enter TP/frequencies. i dont have de ss3ni,snw and ss5ni on my decoder

Reply


@Larbi, please read the followings very carefully: http://www.lemmymorgan.com/frequencies-for-snw-ss3ni-ss7ni-s5n-and-ss5ni-how-to-enter-it-manually-into-decoders/

Reply

kachinga says:December 30, 2014 at 8:19 am

i found the manual settings, i added those freqencies but no channels show up when i do manual scan. Doi need to downgrade software? i am using the latest one you posted

Reply

lemmy says:December 30, 2014 at 8:36 am

@kachinga, call your local satellite installer to help you test your dish with another decoder

Reply

funyguy says:December 30, 2014 at 8:21 am

oga lemmy please can u show me some guides on how to scan my qsat when i am usin multipledish,because i dont understand how to swich those disecq stuff

Reply


@funguy, please call your local satellite installer for help

Reply

clarence says:December 30, 2014 at 8:21 am

Lemmy am using Qsat13 I hv enter all the infor and am still not getting a lot of channels. my decoder canonly scan for 100 channels, am not getting max, Max 1, BBC E and L, ss3ni, 5ni, ss2, ss1 etc. pls help me mydecoder is nothing without this channels

Reply


@Clarence there is no further help for you. Maybe you should downgrade to a lower version of Qsatsoftware (that is if you were receiving a the above mentioned channels prior to upgrade) and besidehave you tested your dish with another decoder?

Reply



Famous says:December 30, 2014 at 8:37 am

Thanks Lemmy for the info but i think snw is not available bcus i v blindscan my qsat 23g still snw is notcoming up, what can i do next pls.

Reply


@famous, snw is same as ss3ni.

Reply

kaba edward says:December 30, 2014 at 8:55 am

Housemates,another reliable tp for SS3ni and SS5ni is 12220/H/27500.Add it and scan manually.Isucceeded in all attempts.Unfortunatly,the channels are not showing as said in de article but may be forprosperity.

Reply

kaba edward says:December 30, 2014 at 9:19 am

To add to my previous contribution,i have observed dat de SNW has changed or replaced by a channelcalled JANGO.You may not see SNW but jango instead.

Reply

victor says:December 30, 2014 at 9:30 am

azsky stopped working since sunday d 28th Dec. only cctv news is on, pls oga lemmy any help?

Reply


@victor, azsky is still working please check your internet or check if your account has expired or not

Reply

justice says:December 30, 2014 at 9:50 am

Lemmy, my avatacamhd code is 47*** wat codes currently showing? Cos mine went off just on sundayafternoon till today

Reply


@justice, qsat is currently working.

Reply



faraday says:December 30, 2014 at 11:28 am

thank u Lammy n merry chistmas to u and blessed new yeartnks

Reply

kwaku says:December 30, 2014 at 1:11 pm

Still ss3ni, ss5ni do not come after manual scan and blind scanis it general problem

Reply


@Kwaku, It is not a general problem. please read the followings:http://www.lemmymorgan.com/frequencies-for-snw-ss3ni-ss7ni-s5n-and-ss5ni-how-to-enter-it-manually-into-decoders/

Reply

AHMAD USMAN says:December 30, 2014 at 1:16 pm

Good day Mr. Lemmy Morgan. Happy Chrismax and prosperous new year in advance. pls sir, Telemundois one of my favorite channels on DSTV, but for the past few weeks the channel is no longer accessibly bothat qsat and AZ sky. pls assist me if their is a new frequency for the Telemundo channel.

Reply


@AHMAD, SCAN TELEMUNDO AND IT WILL COME UP. HOWEVER, YOU CAN ONLY WATCH IT WITH ACCCAM ACCOUNT FOR NOW. ESPECIALLY TV1 CCCAM ACCOUNT

Reply

Micky1GH says:December 30, 2014 at 2:13 pm

pls lemmy how do I enter the TP frequency manually, procedure pls.

Reply


@Micky1GH, Please read this: http://www.lemmymorgan.com/frequencies-for-snw-ss3ni-ss7ni-s5n-and-ss5ni-how-to-enter-it-manually-into-decoders/

Reply

dan owusu says:December 30, 2014 at 2:14 pm

I entered the digits and manual scanned but the ssni signal quality not stable



Reply

ade says:December 30, 2014 at 4:28 pm

how can i check the tittle of the program currently showing on g2 decoder

Reply

Jonathan says:December 30, 2014 at 4:30 pm

Lemmy, those still complaining after using ur trick can remove the lnb in at the back of their qsat and fix itinto lnb out and blind scan. It works perfectly too. Ss3ni and ss5ni will show up. They shouldnt mind thesignal strength. It will show if qsat starts showing those channels.

Reply

AKE MAN says:December 30, 2014 at 4:32 pm

I TRIED THE ABOVE FREQUENCY AND THE CHANNELS ARE NOT COMING UP, WHAT SHOULD I DO? I AMUSING Q23G

Reply


@ake man, read this: http://www.lemmymorgan.com/frequencies-for-snw-ss3ni-ss7ni-s5n-and-ss5ni-how-to-enter-it-manually-into-decoders/

Reply

nelson says:December 30, 2014 at 8:16 pm

help help pls mr lemmy after my upgrade my qsat 13g+ keep writing network connection failed evenwithout sloting in sim on d decoder

Reply


@Nelson : http://www.lemmymorgan.com/a-z-tutorials-on-how-to-connect-your-decoder-dongle-to-internet-solve-internt-connectivity-issues-on-decoders/

Reply

Odu says:December 30, 2014 at 8:30 pm

Is it possible for you to post the back up of ur q11g for those of us that have same decorder as you. I havetried all method posted and my SS3ni and 5ni is not still showing.

Reply




@odu, get any back up a of any qsat decoder that tallies with your model. Ad long as that particularqsat was working when you perform the backup

Reply

dongyile says:December 31, 2014 at 2:15 am

Thanks for the good work you are doing to help us,Please i have qsat11 which the accounts is expired and ibought qsat13+ and that develop a problem with the signal, i sent it to a technician but he could not repairit so is it possible to use the qsat13+ accounts with the qsat11?.Thanks

Reply


@dongyile, you cant swap qsat accounts. Thanks

Reply

lee says:December 31, 2014 at 8:01 am

pls lemmy i have two mini x4 dongles. The type that uses only 3g modem and i think dqcam. I got themearly this year. They worked fine at first and has stopped ever since. Is there any remedy to bring themback alive?

Reply


@lee maybe you can load tv1 cccam account into them

Reply

niiayi says:December 31, 2014 at 8:42 am

I have then that on my q13g but it not working i only have the sport 7 any help

Reply

ayo says:December 31, 2014 at 8:57 am

Is there anyone who has tried any of d method and can confirm dem working. ..

Reply

Zico says:December 31, 2014 at 10:09 am

Its scan 13channels but no SNW only SS7Ni came out maybe its bcos of d new qsat software upgrade v.611

Reply

Lan says:December 31, 2014 at 11:44 am

Kaba Edwards comment /method was very helpful for relieving my SS3Ni and SS5Ni



Reply

Geoff says:December 31, 2014 at 12:04 pm

I have the channels but still says scrambled, I mean the ss3Ni ss5ni

Reply


@Geoff, but i already told you that only ss7ni is opening on qsat decoders using avatarcam codescurrently

Reply

ginis says:December 31, 2014 at 12:56 pm

I tried it from lnb out and I got ss3ni but it didnt open

Reply

stuff says:December 31, 2014 at 1:33 pm

Lemmy, my AZSKY G1+ does not show any African Magic, SS3/SS3i, SS5/SS5i and some other importantchannels. It shows only SS7i and few others. Please I want to know what the problem is. I am using QSATQ11G decoder. Thanks for your great work.

Reply


@stuff, sorry you are using qsat preloaded account not azsky. Thanks. Azsky currently showing allsuper sports channels except ss1

Reply

stuff says:December 31, 2014 at 2:33 pm

Thanks Lemmy. Can I disable the account on the QSAT so that I can use the account on the AZSKYsince I have valid account on the AZSKY? Please hint me on how I can disable it?

Reply

lemmy says:January 1, 2015 at 6:31 pm

@stuff, you can pause or disable qsat accounts

Reply

wityy says:December 31, 2014 at 2:03 pm

lemmy plz hw much does the cccam or avartar cam cost plz coz mine is expired frm ghana



Reply

lemmy says:January 2, 2015 at 8:40 am

@wityy please contact me via my email

Reply

leemo says:December 31, 2014 at 5:43 pm

hi Lemmy,until 4days ago my A+ was going OK, now the blue light is blinking rapidly, and not opening any channel.please diagnose and advice. thanks.31/12/14

Reply

kaba edward says:December 31, 2014 at 6:06 pm

SS3NI AND SS5NI SHOWING OR OPENING AS AT 6PM GH TIME

Reply

atomic letra says:December 31, 2014 at 8:08 pm

hello Lemmy I observed that if u used the frequency that kaba Edward posted u will get the ss3ni andss5ni but it will not open it will b scrambled I.e if u are using azsky dongle with ur qsat .d only way for it toopen according to my observation is for u to superimposed. ie make sure u have unstable frequency of12207h 27492 and the stable frequency of 12222h 27500 so for the stable frequency to open you have toview d unstable supersport either ss3ni or ss5ni even if it is skiping alot just make sure u open it then youwill now go to view the corresponding stable supersport either ss3ni or ss5ni for example ss3ni unstableopen to view then u go to ss3ni stable vice versa then u will see d magic

Reply

Biggie says:December 31, 2014 at 9:20 pm

Let me be d first person to inform d ouse dat SS3Ni is back and wit a huge stability as at 9.30pm till10.20pmish dat am posting dis. And one more tin guys, leave SNw for now and enjoy ss3 n ss3Ni

Reply

nanas says:January 1, 2015 at 1:11 am

house qsat is back with ss3ni and ss5ni, thanks mr. Lemmy

Reply

odijie says:January 1, 2015 at 7:33 am

Happy new year lemymorganpls I brought a new AZsky to used it with SRT 4940l put d pitch sorfware inside d stronginside d pitch menu there are there things but I dont see option inside the decoderthe three thing are



Twin protocolEthernet CSCssspI have connected d Azsky to d 4950 but is not opening d dstv channelwhen I tested d AZsky with another decoder it workpls what do I need to do enable my it work with my 4950pls help meI am an installer pls help me

Reply


@odije, I dont know if azsky can work with 4940..

Reply

Rahim says:January 1, 2015 at 7:42 am

Good day Lemmy, i bought AONE {all in one} DECODER a new product i have configure it but there aresome problems ss3 snw, canal s shows for 2 minutes and go off for 3 minutes sometimes says scramblechannels, sometimes all of them scramble channels. i want to buy cccamp account to try it perhaps it shallstable. or do you have any idea for this new decoder? please help

Reply


@Rahim, buy a tv1 cccam account and your decoder will start working steadily.

Reply

Justice says:January 1, 2015 at 10:03 am

Good day Lemmy,I want to wish you and all your cherish followers a Happy New and to bring to your attention thatSS3Ni,SS5Ni and SS7Ni are now showing ooooooo

Reply

Hyman says:January 1, 2015 at 10:48 am

compliments to u mr lemmy, so thankful for ur assistance to all us. mr lemmy pls what are the signs ofthose that their avatarcan is totally offline? my q11g+ that was working fine after upgrade stoped workingfor 3days now and is on ur website that iget all my guild lines,so pls how do one know hes avatercan isoffline and what can we do . ur response is my only way out, for as i speak to u it is not connecting andeven if it connects it does not disscramble the channels.

Reply


@hyman, please change your sim card and try and query your avatarcam code. If the code displays,then your channels should open. Otherwise your code is off

Reply



adi says:January 1, 2015 at 4:52 pm

HNY sir thumbs up changing the lnb port opened up the ss channels..But the problem wit qsat decoder notcoming on with sim inserted persists..ofcox it works without netwrk connection but that is not a solutionnow is it?help

Reply

emmanuel says:January 1, 2015 at 7:09 pm

Happy new year 2015 Oga Lemmy.Please Oga Lemmy can you please give the model of a wifi adapter thatworks with strong 4950?thanks

Reply


@emmanuel, please search my article on compatible wifi adapters

Reply

BobGh says:January 1, 2015 at 8:02 pm

Oga LM, I salute you. Please mos of my ss chanels re working in exception of ss3ni and ss5ni. They bothcome as scratches coz of signal instability. What could be the problem? Any help? Thanks.

Reply

Femmy says:January 1, 2015 at 8:25 pm

i really love ur post concerning d ss3 and ss7 though am using strong decorder av nt been able to enjoy myazsky after upgrading due to the flutuating ss3 bt nw with d frq and tp above ss3 has come to stay on mydecorder bt there still some channel that are nt openin channels like: Cartoon Network,Africa magic,DisneyXD,Blitz etc hope there are some solution to it or if i may say can you share the frequency and tp isd above station is working.. Thanx and Happy new yr long live Lemmy and morgan.

Reply


@Femmy, all those mentioned channels are showing on azsky. maybe you want to talk about qsat notazsky thanks.

Reply

mykel says:January 2, 2015 at 9:19 am

This problem is for only qsat only. my tlink600hd and my friend using tlink900hd are all showing withazsky dongles. Though sometimes 3ni or 3 will freeze but both dont go. I believe the advantages of tlinkdecoders are many over others. Ive been using mine for like four(4) years now. Pls can we get the decoderfrom u? Thanks.

Reply




@mykel, tlink is available but expensive.

Reply

leemo says:January 2, 2015 at 9:26 am

Oga Lemmy please respond. as @ this time 10:23.Nig. time. my A+ blue light is blinkin rapidly and notopening any channel please what may be the problem. thanks.

Reply


@leemo a+ goes off anytime and comes back anytime try my trick here though:How To Renew A+ / A+Gold Accounts Accounts Now Available for A+

Reply

kaba edward says:January 2, 2015 at 12:17 pm

I have difficulty playing a recorded item on my qsat.i just dont know how to go about it.Secondly if dedrive is inserted in a strong decoder de item appears as PVR and it will not open when clicked on.I emailedu since 24th dec.2014 and a reminder on de 26th yet no response.kindly help me on de two scenarios.

Reply


@kaba, that is hardware problem.. change your flash drive, try your flash drive on another qsat,factory reset your qsat decoder.. try all sorts of trick but definitely only you can help yourself with this.I am not having this problem sir.

Reply

Bishop says:January 3, 2015 at 10:38 am

Please lemme my ss chancels re working in exception of ss3ni and ss5ni. They both sowing signal. Whatcould be the problem? Any help? Thanks.

Reply

Emmy says:January 3, 2015 at 5:21 pm

Hello lemmy,pls ,how can i renew my q sat 11g account?

Reply


@emmy, you can contact me on Monday or Tuesday for the qsat accounts purchase. Use my emailaddress info @lemmymorgan.com



Reply

Gabriel Essel says:January 4, 2015 at 2:26 pm

The LNB out method worked. Its working

Reply

Lelover says:January 5, 2015 at 7:01 am

Mr lemmy is q26g is good to watch canal sat smoothly without too freeze??

Reply

Alex says:January 5, 2015 at 10:52 am

Hello Lemmy, do those values apply only to West Africa? I have tried here in the East but it is only SS7Nithat is up

Reply


@alex, most of them apply only to West Africa. Thanks

Reply

AhmedG says:January 5, 2015 at 9:48 pm

Lemmy I did d LNB out method and I got d SS Nigeria. but 0% quality. I hv TV1 and active qsat accountsbut d SS3Ni is not opening. Any solution.

Reply

taiwo dahunsi says:January 7, 2015 at 2:33 pm

hello Lemmy please Im using qsat 23g I dont know y its not coming up, it just written load on its screen Idont know what to do please help me.

Reply


@taiwo, thats a huge hardware problem. Please take it to a hardware engineer.

Reply

WISDOM says:January 7, 2015 at 8:33 pm

Pls Lemmy, is qsat currently down? mine is not opening dst even after connecting to server and showingactive code.

Reply




@wisdom, qsat is currently down

Reply

Olatunji Emmanuel says:January 8, 2015 at 5:37 am

Hello Mr Lemmy,Let me first appreciate you for the great work you are doing for humanity may d good Lord bless youmore.My problem is that after i have upgrade my Xman g8 of Q11g with d software from your website,everything was successful, I retrieved all d channels but my account said ACTIVENUMBER EXPIRES or BOXHASNT ACCOUNT when I try to update it from AvatarHDcam & up till now all ds** Channels remainsScrambled except joy tv, kindly help me on what else to do.Pls, I will be glad if your assistance make available. Thanks very much

Reply


@olatunji, you need to buy another account. If you need help buying a genuine account, contact me onmy email info@ lemmymorgan.com

Reply

taiwo says:January 9, 2015 at 11:06 pm

please Lemmy how much should it cost me to buy a year account on qsat I dont know where to get itplease help me, God bless you bro

Reply


@taiwo, there is no more single one year qsat account. to get one year valdity period on your qsat, youneed to buy two six months account and load it into your qsat one after tthe other on your qsat. For youto buy the six months qsat account, send me an email on info @ lemmymorgan.com

Reply

Aninta says:January 11, 2015 at 9:39 pm

Method 3 worked for me well.

However, the problem i had with some of my fav channels on 12,244H still continues. Before pluging toLNB out, the signal quality is zero but it will scan and save. After 1hr signal will come a little andimproving with time cracking for a while till it clears out hrs after. If the decoder shuts down the signal islost and starts afresh. On LNB out it works but still cracking though i know the dish position is good since iequally use D*TV decoder and have adjusted recently. Many fav channels are on d freq, Disc, MMPrem,SS1, SS3, AMFam etc I have changed the freq to 12245H and has higher signal quality to all others but stillcracks.

Reply




@anibta, inform your local satellite installer about this development. He will find solutions

Reply

kobina says:January 14, 2015 at 11:17 am

pls brother lemmy,i reset my qsat 13 and 23 and just after that i noticed both machines goes off by itself..pls what could be the problem?

Reply


@kobina please change your internet protocol immediately

Reply

walker says:January 15, 2015 at 12:09 pm

Hi Lemmy is qsat off

Reply

aLEXANDER says:January 21, 2015 at 11:58 am

kudos bro and happy new yearjust want you give us all we should know about the Q-sat 23g as to the previous edition of same brand andmoreover if bought my 23g like july of last year do i need to do the upgrading too? if yes pls what is theprocedure thanks

Reply

Speak Your Mind

Name *

Email *

Website

POST COMMENT



Recent Comments

lemmy on DONGLES / IKS DECODERS UPDATES CHANGING OF THE GUARDS

lemmy on GLO Blackberry Cheat On Android Vs AirtelBlackerry Tweak On All Devices

lemmy on Tips & Tricks On How To Enjoy Your TV1Cccam Account[Minimize Freezing & avoid Banning]

Trending Posts

DONGLES / IKS DECODERS UPDATES CHANGING OFTHE GUARDS

My Hands ON G6 Lite HD MPEG-4 DV3 + GPRS COMBORECEIVER Feel the power of Ist Class Acct

Download Latest Upgrade Firmware for Qsat Q11G,Q13G & Q15G _V5 (Fix bugs and improve performance)

Azsky Releases New Recharge Tool V3.08 & v1.02 For G1Golden

Copyright 2015 Lemmy Morgan Designed by Don Caprio

AccountingSoftware1

FreeSatelliteTelevision2

SatelliteTVCodes3

UnlimitedDataPlans4

CheapInternetPlans5

Ads

Documents

Frequencies For SNW, SS3Ni, SS7Ni, S5N and SS5Ni + How To enter it Manually Into decoders