Partnumber Description

Lube-Shuttle® System-Side Lever Grease GunAll lever grease gun for Lube-Shuttle cartridges, high qua-lity zinc plated steel barrel and ergonomic hand grip. Packed in environmentally friendly display carton. Working pressure over 400 bar / 5,800 psi, maximum pres-sure capability 800 bar / 11,600 psi approx. TÜV, DLG, BLT approved.

Advantages: - Tool free cartridge opening with screw-cap, re-usable- Fast and clean loading and unloading without opening gun- Type and quantity of grease visible at a glance- Optimum use of all grease in cartridge- Environmentally friendly - Refillable using Lube-Shuttle filler pumps with refill adaptor (part no. MA3115050)- No air venting necessary !

With 300mm High Pressure nylon hose PH-30C, multiple braid, burst pressure 1,000 bar/14,450 psi, Ø-9mm, and 4-jaw hydraulic coupler

MA30320 Lube-Shuttle® with hose PH-30C, Thread M10x1

Lube-Shuttle® TG System - One Hand Gun One hand grease gun with zinc plated steel barrel for Lu-be-Shuttle System-Cartridges, ergonomically designed pis-tol grip, packed in environmentally friendly carton

Pressure capability of approx. 300 bar / 4,350 psiFor details of the features and advantages of the MATO-Lube-Shuttle Grease Gun System see above

With 300mm High Pressure nylon hose PH-30C, multiple braid, burst pressure 1,000 bar/14,450 psi, Ø-9mm, and 4-jaw hydraulic coupler

MA30360 Lube-Shuttle® with hose PH-30C, Thread M10x1

Handlever

2

Partnumber Description

Lube-Shuttle® AccuLuber 14.4-LS Ni-CdRobust Electric 14.4V Battery Operated Grease Gun for Lube-Shuttle® - system-cartridges.Simply remove the cartridge cap, insert into the zinc plated steel body,screw in and you are ready to go !A powerful DC motor drive, with planetary gearbox and reciprocating piston yields up to 400 bar of grease pressure.The maximum pressure is limited by an inbuilt relief valve.

Description: Battery operated grease gun, 14.4V Ni-Cd battery, 1,500mAh, Delivery: 100cc per min. approx., electronically controlled, fast charger with overload protection (1 hour charging time), high pressure rubber hose 750mm (burst pressure 1,650 bar) with 4-jaw hydraulic coupler R1/8 ", in carry-along case with space for spare battery and grease cartridge.

MA34258 Electric Grease Gun Kit AccuLuber 14.4-LS Ni-CD

Electric Grease Gun Kit AccuLuber 14.4-LS Ni-CD with a second battery

Spare Battery for AccuLuber 14.4-S + LS Ni-CDHigh Power Ni-Cad Battery 14.4V DC, 1,500mAhCharging time: 1 hour approx.

MA34259 Spare Battery for AccuLuber 14.4-S + LS Ni-CD

Chargers for Acculuber 14.4-S + LSBattery Charger with Overload Protection 14.4 DC, ON/OFF LED monitoring lamp, fast-charge function, 2m cable

MA3425920 Charger 230V AC 50 Hz for Acculuber 14.4-S + LS Ni-Cd

Electrical pumps

3

Partnumber Description

High Pressure Rubber Hose for AccuLuber 14.4-LS Ni-CDHigh pressure safety hose ø 13mm, hexagonal end fit -tings for positive and safe installation, burst pressure 1,650 bar (double steel wire braided), either with or without 4-Jaw hydraulic coupler.

MA3258948 RH-75 750mm Thread R 1/8 ", with Coupler

Carrying Strap for AcculuberSimple, fast and secure strap ensuring easy and comfortableoperation of the battery driven grease gun

MA3425999 Carrying Strap for Acculuber 14.4-LS

Lube-Shuttle® Grease Spray Unit LubeJet-ecoThis Air Pressure Operated Grease Spray Unit enables the spraying of grease directly from the Lube-Shuttle® Sys-tem-Cartridge without the need for propellants or chemical additives such as sol-vents. Spraying grease onto chains, wire ropes, open gears, sli-deways, telescopic booms etc. o�ers enormous potential for cost savings. The wasteful application of grease is history. The wide range of uses is literally unlimit.

MA3425920 Lube-Shuttle® Grease Spray Unit LubeJet-eco

Lube-Shuttle® Air Operated Grease Gun DF-LSOne Hand Air Operated Grease Gun for Lube-Shuttle® - Cartridges, designed for grease to NLGI class 3, single shot system, output 1ccm per stroke, pressure ratio 1:60, max. pressure 480 bar / 6,950 psi, air pressure 3 to 8 bar

MA3037307 DF-LS with rubber hose RH-30C R1/8 ", with Coupler

Lube-Shuttle® Dispenser Lube-Shot 400 Designed to apply grease to all open surfaces, such as uncaged roller bearings. The dispenser will replace traditional, messy methods of application with open cartridges and brushes. The use of this dispenser will permit clean and uncontaminated greasing of open bearings. Lube-Shot 400 with nozzle, screw cap and an adaptor nozzle for the Lube-Shuttle® System-Car -tridge.

MA3000110 Lube-Shuttle® Dispenser Lube-Shot 400

Nozzle-Set Lube-Shot 400Nozzle with Closure Capfor the Lube-Shuttle® - System-Cartridges

MA3000905 Nozzle-Set Lube-Shot 400

Guns + Accessories

4

Partnumber Description

Lube-Shuttle® Cartridges EmptyEmpty Lube-Shuttle® Cartridgeswith follower plate inserted and screw cap loosely atta-ched

MATO recommends emptycartridges of MBP-France: www.mbp-plastics.com

Packing Unit: 112 pcs.

MA3119805 Lube-Shuttle® Cartridges Empty

Lube-Shuttle® Cartridge Screw Caps24 Screw caps, packed in poly bag,for sealing cartridges after filling

MA3110000 Lube-Shuttle® Cartridge Screw Caps

Lube-Shuttle® Refill-Adapter-SetLube-Shuttle Cartridge Refill adaptor for use with MATO ecoFILL and pneuMATO-fill filler pumps,with threaded adaptor and 5 yellow screw caps, for sealing cartridges after refilling.

Simple and clean refilling of empty cartridges !

MA3115050 Refill-Adapter-Set Lube-Shuttle®

Pneumatic Filler Pump pneuMATO-fillFiller Pump with high output for clean and quick filling of Lube-Shuttle® cartridges (using Refill-Adaptor)or Grease Guns with Filler Point

MA3037307 To fulfill LS Cartridge from Molykote ® 25 Kgs pail :pneuMATO-fill-50-d for 50kg Kegs, Inner-Ø 265-285 mm

To fulfill LS Cartridge from Molykote ® 50 Kgs pail :pneuMATO-fill-50-d for 50kg Kegs, Inner-Ø 355-387 mm

To fulfill LS Cartridge from Molykote ® 180 Kgs drum :pneuMATO-fill-200-d for 200kg Kegs, Inner-Ø 550-590 mm

Filling equipment

5

Partnumber Description

Lube-Shuttle® Promo-SetLube-Shuttle® Promo-Set in display cartonwith Lube-Shuttle lever grease gun either with two Lube-Shuttle cartridges MOLYKOTE

with 230mm High Pressure nylon hose PH-30C,multiple braid, burst pressure 1,000 bar/14,450 psi, Ø-9mm,and 4-jaw hydraulic coupler

Lube-Shuttle® Promo-Set with PH-30C, M10x1, 1 MOLYKOTE MULTILUB LS Cartridge, 1 MOLYKOTE BR2+ LS Cartridge

Lube-Shuttle® Promo-Set with PH-30C, M10x1, 1 MOLYKOTE XXXX LS Cartridge, 1 MOLYKOTE XXXX LS Cartridge

Promotional material

6

Molykote ® MultilubDescription : High-performance grease for metal/metal combinations involving slow to fast movements and medium to high loads.

Applications : Lubrication contacts with light to medium loads and low to high speeds, even in the presence of moisture and spray; used on roller bearings, sliding guides, roller guides, ball-and-socket joints, splined shafts and threaded spindles; Used for chassis lubrication on cranes, forklift trucks and lifting apparatus.

Features : Good load-carrying capacity; Suitable for long term lubrication by virtue of low oil evaporation; Good water wash-out resistance; Good corrosion protection; Good oxidation resistance; Reduction of wear and scoring.

Composition : Mineral oil; Lithium soap; Ep additive; Corrosion inhibitor.

Temperature Range : From -25°C to +120°C.

Molykote ® BR PlusDescription : High-performance grease with solid lubricants for metal/metal combinations involving slow to fast movements, particularly with medium to high loads.

Applications : Used successfully on roller bearings, plain bearings,sliding guides, roller guides, ball-and-socket joints, splined shafts and threaded spindles.

Features : High load-carrying capacity; Suitable for long-term lubrication; Good oxidation resistance; Emergency running properties, i.e. in the case of mixed friction providing of wear protection by solid lubricants and EP additives; Good protection against scaring (false brinelling); Good water wah-out resistance; Good corrosion protection; Good protection against fretting corrosion.

Composition : Mineral oil; Lithium soap; Solid lubricants; Ep additive; Corrosion inhibitor.

Temperature Range : From -30°C to +130°C, +150°C for short periods.

Molykote ® Longterm 2 PlusDescription : Lubricating grease for metal/metal combinations with slow to medium-fast movements especially with high loads.

Applications : Used successfully for bearings, spline profiles and clutches in highly stressed motor vehicles, tractors, cranes, earth-moving machines, conveyor belts and forklift trucks, also where there is a risk of fretting corrosion, groove formation (brinell e�ect) or moisture.

Features : High load-carrying capacity; Suitable for long-term lubrication; In mixed friction it provides wear protection due to solid lubricants and EP additives, Good adhesion strength; Good protection against corrosion.

Composition : Mineral oil; Lithium soap; Solid lubricants; Ep additive; Corrosion inhibitor; Adhesion improver.

Temperature Range : From -25°C to +110°C, +130°C for short periods

Molykote ® Longterm W2Description : White lubricating grease for metal/metal combinations with slow to fast movements and medium loads.

Applications : Used successfully for bearings in machinery used in the food and pharmaceutical industries, in textile and paper making machines, domestic appliances and mechanical precision instruments.

Features : Good load-carrying capacity; Suitable for long-term lubrication since it has no tendency to oxidize; Wear protection through solid lubricants; Good adhesion strength due to incorporated adhesion improver; Good corrosion protection; Prevents the formation of frictional corrosion.

Composition : Mineral oil; Lithium soap; Solid lubricants; Adhesion improver.

Temperature Range : From -30°C to +110°C, +130°C for short periods

Molykote ® G-4500Description : Specialty lubricant that combines the benefits of wide operating temperature and broad compatibility with varied materials.

Applications : Long-term lubrication for assembly and maintenance; Can be used in food-processing applications involving mixers, motors, conveyors, low-temperature equipment, packaging machines and many other applications in or out of the food processing industry where a white grease may be desirable. Such applications may involve furni-ture, instrumentation, photo and optical equipment.

Features : Multi-purpose capabilities; Whide temperature operating range; Broad compatibility; Complies with the listing requirements of the FDA regulation 21 CFR 178.3570 and is registered at NSF under H1 category for «inciden-tal food contact».

Composition : Polyalphaolefine; Aluminum complex thickeners; Solid lubricants.

Temperature Range : From -40°C to +150°C.

Products

7