13
QualityForkExtension ns made by VETTER The ideal solution for lifting loads which are much longer than the which are much longer than the existing fork. Designed according to ISO 13284 Designed according to ISO 13284 and CE guideline „Machines“ 89/392/EEU-IIA!

Fork Extensions Crepa-22

Embed Size (px)

DESCRIPTION

BS ISO 13824

Citation preview

Page 1: Fork Extensions Crepa-22

QualityForkExtensionQ y ns made by VETTERy

The ideal solution for lifting loads which are much longer than thewhich are much longer than the existing fork.

Designed according to ISO 13284Designed according to ISO 13284 and CE guideline „Machines“ 89/392/EEU-IIA!

Page 2: Fork Extensions Crepa-22

Available versions

Open version

Welded structure with an open lower side

Solid and cost-effective solution for the transport of loads which are distributed over the wholeare distributed over the whole

length of the extension

Closed version

Welded and extra solid box design with a closed lower side

Designed to lift also loads whichhave their centre of gravity

outside the length of the basicoutside the length of the basicfork

Page 3: Fork Extensions Crepa-22

Demands of ISO 13284

Please observe:Please observe:

The existing fork must support at least Otherwise, technical clearance is neces,

LGV(max) =

The rated capacity of the fork extensionthe rated capacity and load centre of thseparately.

60 % of the fork extension length. ssary.y

= LGZ / 0,6

n is designed to suit the particular fork, he lift truck needs to be checked

Page 4: Fork Extensions Crepa-22

Demands of ISO 13284

Please observe:Please observe:

Fork extensions need to be equipped woff. o

These looking bolts have to stand 50 %stability is necessary. y y

with locking bolts to prevent slipping

% of the defined test load, i.e. sufficient

Page 5: Fork Extensions Crepa-22

Demands of ISO 13284

Further demands:Further demands:

• Minimum tolerance between fork extemaximum 10 % play are allowed. % p y

• Fork extension has to comply with all

Endurance testedMinimum 1,000,000 stress cycles with 25 % overload without failures

ension and the particular fork is 10mm,

demands of ISO 2330, i.e.

Safety factor 3:1Tested with 300 % of the rated capacity without faillures

Page 6: Fork Extensions Crepa-22

Demands of ISO 13284 / CE

•The scope of supply has to include deThe scope of supply has to include de

• Type plate needs to be mounted

certification

tailed operating instructionstailed operating instructions

Page 7: Fork Extensions Crepa-22

Advantages QualityForkExteng y

Advantage 1:

Solid welded box design (no bent profilSafe and stable positioning onto

nsions

e)o the fork

Page 8: Fork Extensions Crepa-22

Advantages QualityForkExteng y

Advantage 2:

Individual adaptation to the cross-sectioTight tolerances, noise reductio

nsions

on of the existing forkn and optimized overall dimensions

Page 9: Fork Extensions Crepa-22

Advantages QualityForkExteng y

Advantage 3:

Tip of the extension tapered and chamfRapid and convenient loading of

nsions

fered on the sides and undersidef pallets etc.

Page 10: Fork Extensions Crepa-22

Advantages QualityForkExteng y

Advantage 4:

Made of solid, strong sheet metal. For static reasons, the lateral sheets ar

Maximum strengthMaximum strength

nsions

re extra thick.

Page 11: Fork Extensions Crepa-22

Advantages QualityForkExteng y

Advantage 5:

In the standard version equipped with lto prevent slipping off

nsions

ocking bolts

Page 12: Fork Extensions Crepa-22

Order information

Information to be indicated when ordering

• Open or closed version?

• Cross-section of the existing fork (width x th

R i d t t l l th f th t i (L )?• Required total length of the extension (LGV)?

• Width of the existing fork in the heel section

• Blade length of the existing fork (LGz )?

g fork extensions

ickness)?

??

(BK)?

Page 13: Fork Extensions Crepa-22

Concl

VETTER QualityForkExtadvantages in safety tadvantages in safety, t

efficiency in

Do not ac

usion

tensions offer significanttime savings and moretime savings and moreapplication!

cept less!