Embed Size (px)
Citation preview
Forged steel valves
D
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P03 06-01
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 14001
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 9001
FEATURES
ELECTRIC ACTUATOR PNEUMATIC ACTUATOR
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
10 (3/8") 15 (1/2") 20 (3/4") 25 (1") 32 (1-1/4") 40 (1-1/2") 50 (2") 65 (2-1/2") 80 (3")100 (4")
5.0 (11.0 LB) 4.9 (10.8 LB) 8.2 (18.1 LB) 8.0 (17.6 LB) 30.3 (66.8 LB) 30.3 (66.8 LB) 28.8 (63.5 LB)
---
4.6 (10.1 LB) 4.5 (9.9 LB) 7.4 (16.3 LB) 7.2 (15.9 LB) 27.3 (60.2 LB) 27.3 (60.2 LB) 26.0 (57.3 LB) - - -
4.6 (10.1 LB) 4.5 (9.9 LB) 6.7 (14.8 LB) 6.5 (14.3 LB) 28.2 (62.2 LB) 28.2 (62.2 LB) 26.9 (59.3 LB) 90.0 (198.4 LB) 87.0 (191.8 LB) 83.0 (183.0 LB)
DETAILED FEATURES REGARDING THE VALVE DESIGN AND MATERIALS USED HAVE BEEN INDICATED ON THE VALVE SPECIFIC DATA SHEETS
VALVES CAN BE FITTED WITH ALL TYPES AND MAKES OF ACTUATORS
PNEUMATIC ACTUATORS CAN BE DIAPHRAGM AS WELL AS PISTON TYPE ACTUATORS
ACTUATORS WILL BE ACCURATELY SIZED AND EACH AND EVERY UNIT WILL BE FUNCTIONALLY TESTED BY HP VALVES
BECAUSE OF THE RIGID VALVE CONSTRUCTION, VALVES CAN BE INSTALLED BOTH IN HORIZONTAL AND VERTICAL LINES
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL MOTOR OPERATED VALVES, BONNETLESS
205 (8.07)205 (8.07)220 (8.66)220 (8.66)350 (13.78)350 (13.78)350 (13.78)
---
223 (8.78)223 (8.78)235 (9.25)235 (9.25)369 (14.53)369 (14.53)369 (14.53)530 (20.87)530 (20.87)530 (20.87)
NOM. SIZE D VALVE WEIGHT KG D VALVE WEIGHT KG D VALVE WEIGHT KG
205 (8.07) 205 (8.07) 220 (8.66) 220 (8.66) 350 (13.78) 350 (13.78) 350 (13.78)
---
PATTERN STRAIGHT (FIG 02.1) SHORT (FIG 02.6) Y (FIG 02.2)
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P04 06-01
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 14001
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
10 (3/8")
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
210 (8.27)
210 (8.27)
230 (9.06)
230 (9.06)
300 (11.81)
300 (11.81)
300 (11.81)
220 (8.66)
220 (8.66)
278 (10.94)
278 (10.94)
450 (17.72)
450 (17.72)
450 (17.72)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
1.3
2.5
6.2
6.8
23.6
23.6
31.0
3.9 (8.6 LB)
3.8 (8.4 LB)
7.4 (16.3 LB)
7.2 (15.9 LB)
31.0 (68.3 LB)
31.0 (68.3 LB)
29.5 (65.0 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS SCREW-DOWN NON-RETURN VALVE AND/OR ANGLE PATTERN WITH 75 MM (<_ 1") / 125 MM (<_ 2") CENTRE-TO-END OPERATION OPTIONAL NON-ROTATING ONE-PIECE STEM/DISC FOR ELECTRIC OR PNEUMATIC ACTUATOR (FIG 02.1) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST) TRIM 17CR (1.4122) / STELLITE - F316 (1.4401) / STELLITE - 431 (1.4057) (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS-EN 15761 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL GLOBE VALVES, BONNETLESS - FIG 01.1
21
08
07
27
09
10
12
13
50
14
28
44
01
02
03
04
05
A
F
D
B
E
C
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P05 06-01
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 14001
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F G Cv WEIGHT KG
10 (3/8")
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
236 (9.29)
236 (9.29)
291 (11.46)
291 (11.46)
469 (18.46)
469 (18.46)
469 (18.46)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
3.4 (7.5 LB)
3.3 (7.3 LB)
5.9 (13.0 LB)
5.7 (12.6 LB)
28.9 (68.7 LB)
28.9 (68.7 LB)
27.6 (60.8 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS ALSO IN SIZES EXCEEDING 2” (FIG 02.2) AND AS SCREW-DOWN NON-RETURN VALVE OPERATION OPTIONAL NON-ROTATING ONE-PIECE STEM/DISC FOR ELECTRIC OR PNEUMATIC ACTUATOR (FIG 02.2) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N - SA182-F22 - SA182-F91 - SA182-F316(L) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS-EN 15761 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 / 1500 / 1700 / 2500 / 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)
FORGED STEEL Y-PATTERN GLOBE VALVES, BONNETLESS - FIG 01.2
44
21
28
50
13
14
10
27
09
12
07
05
04
03
02
01
08
55 o
G
F
E
C
B A
D
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
115 (4.53)
115 (4.53)
140 (5.51)
140 (5.51)
245 (9.65)
245 (9.65)
245 (9.65)
21 (0.83)
21 (0.83)
29 (1.14)
29 (1.14)
50 (1.97)
50 (1.97)
50 (1.97)
43.3 (1.70)
43.3 (1.70)
51.5 (2.02)
51.5 (2.02)
85.0 (3.35)
85.0 (3.35)
85.0 (3.35)
1.5
2.7
8.0
8.7
34.4
34.4
44.2
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P14-H16 12-01
LLOY
D'SREGI S
TER QUAL I T Y
ASSU
RANCE
I S O 14001
LLOY
D'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
18 (0.71)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
11 (0.43)
15 (0.59)
18 (0.71)
28 (1.10)
36 (1.42)
36 (1.42)
75 (2.95)
75 (2.95)
75 (2.95)
175 (6.89)
175 (6.89)
175 (6.89)
260 (10.24)
260 (10.24)
260 (10.24)
430 (16.93)
430 (16.93)
430 (16.93)
75 (2.95)
75 (2.95)
75 (2.95)
175 (6.89)
175 (6.89)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
-
-
-
-
-
-
7.6 (16.8 LB)
7.4 (16.3 LB)
7.2 (15.9 LB)
34.1 (75.2 LB)
32.9 (72.5 LB)
32.9 (72.5 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) OPTIONS SCREW-DOWN NON-RETURN VALVE OPERATION OPTIONAL NON-ROTATING ONE-PIECE STEM/DISC FOR ELECTRIC OR PNEUMATIC ACTUATOR (FIG 02.3) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA182-F316(L) - SA350-LF2 - SA182-F92 - 16Mo3 TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL GLOBE VALVES, ANGLE PATTERN, BONNETLESS - FIG 01.3
C
B
DE
A
F
03
02
01
09
27
07
08
05
04
28
14
50
13
12
10
21
44
B
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P14 12-01
LLOY
D'SREGI S
TER QUAL I T Y
ASSU
RANCE
I S O 14001
LLOY
D'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
18 (0.71)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
11 (0.43)
15 (0.59)
18 (0.71)
28 (1.10)
36 (1.42)
36 (1.42)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
175 (6.89)
175 (6.89)
260 (10.24)
260 (10.24)
260 (10.24)
430 (16.93)
430 (16.93)
430 (16.93)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
175 (6.89)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
-
-
-
-
-
-
8.0 (17.4 LB)
7.9 (17.2 LB)
7.8 (17.0 LB)
34.1 (75.2 LB)
32.9 (72.5 LB)
32.9 (72.5 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) OPTIONS SCREW-DOWN NON-RETURN VALVE OPERATION OPTIONAL NON-ROTATING ONE-PIECE STEM/DISC FOR ELECTRIC OR PNEUMATIC ACTUATOR (FIG 02.3) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL GLOBE VALVES, ANGLE PATTERN, BONNETLESS - FIG 01.3
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B04-P04 15-00
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
10 (3/8”)
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
132 (5.20)
132 (5.20)
154 (6.06)
154 (6.06)
192 (7.56)
192 (7.56)
192 (7.56)
220 (8.66)
220 (8.66)
278 (10.94)
278 (10.94)
450 (17.72)
450 (17.72)
450 (17.72)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
1.3
2.2
5.9
6.7
22.3
22.3
26.1
3.5 (7.7 LB)
3.4 (7.5 LB)
6.7 (14.8 LB)
6.5 (14.3 LB)
28.0 (61.7 LB)
28.0 (61.7 LB)
26.7 (58.9 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT
SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”)
OPERATION OPTIONAL NON-ROTATING ONE-PIECE STEM/DISC FOR ELECTRIC OR PNEUMATIC ACTUATOR (FIG 02.6)
ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N - SA350-LF2 - SA182-F12 - SA182-F22 - SA182-F316(L) - SA182-F51 (OTHERS ON REQUEST)
TRIM 17CR/STELLITE - F316/STELLITE - F51/STELLITE (OTHERS ON REQUEST)
STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - (API 600) - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL GLOBE VALVES, BONNETLESS - FIG 01.6
21
08
07
27
09
10
12
13
50
14
28
44
01
02
03
04
05
C
B A
F
DE
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P06 06-01
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 14001
LLOYD'SREGIS
TER QUALITY
ASSURANCE
ISO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
10 (3/8")
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
210 (8.27)
210 (8.27)
230 (9.06)
230 (9.06)
300 (11.81)
300 (11.81)
300 (11.81)
215 (8.46)
215 (8.46)
263 (10.35)
263 (10.35)
426 (16.77)
426 (16.77)
426 (16.77)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
1.2
2.5
6.1
7.1
23.2
23.2
31.5
4.0 (8.8 LB)
3.9 (8.6 LB)
7.7 (17.0 LB)
7.5 (16.5 LB)
32.0 (70.5 LB)
32.0 (70.5 LB)
30.5 (67.2 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS PARABOLIC DISC AND/OR ANGLE PATTERN WITH 75 MM (<_ 1") / 125 MM (<_ 2") CENTRE-TO-END OPERATION HANDWHEEL - GEARBOX - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST) TRIM 17CR (1.4122) / STELLITE - F316 (1.4401) / STELLITE - 431 (1.4057) (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND / FLANGE AISI 304 / CARBON STEEL
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
11 STEM / DISC 17 CR / STELLITED (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
15 POSITION INDICATOR 17 CR
23 PARALLEL KEY STAINLESS STEEL
25 SET SCREW STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
32 THIN NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
DESIGN ASME B16.34 - BS-EN 15761 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL THROTTLE VALVES, BONNETLESS - FIG 02.1
32
01
02
04
05
23
07
27
25
15
11
12
13
14
44
09
B A
F
DE
C
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P24 15-00
LLOYD’S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 14001
LLOYD’S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E G Cv WEIGHT KG
65 (2-1/2")
80 (3")
50 (1.97)
60 (2.36)
50 (1.97)
60 (2.36)
320 (12.60)
320 (12.60)
530 (20.87)
530 (20.87)
72 (2.83)
72 (2.83)
79.0 (3.11)
79.0 (3.11)
95.9
142.4
90 (198 LB)
87 (192 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS PARABOLIC DISC OPERATION GEARBOX - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N (1.0460) - SA182-F22 (10CrMo9.10)- SA182-F91 (1.4903) - SA182-F316(L) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316(L) /STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC F316(L) / STELLITED
04 LOOSE BACKSEAT ASTM-A182-F316(L)
05 STEM PACKING GRAPHITE
07 GLAND FLANGE 42CrMo4
08 GLAND ASTM-A182-F316(L)
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE / FLANGE ASTM-A216-WCB
15 POSITION INDICATOR CARBON STEEL
16 BOLT STEEL ZINC PLATED
23 PARALLEL KEY STAINLESS STEEL
26 BOLT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
61521 NE - 16751 NE-SB - 43.61B EMSA NGISED
BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627
OTHER END CONNECTIONS CLAMP CONNECTORS
END-TO-END DIMENSIONS MANUFACTURER’S STANDARD
PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 / 1500 / 1700 / 2500 / 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)EN RATING PN160 - PN500 (760)
FORGED STEEL Y-PATTERN GLOBE VALVES, BONNETLESS - FIG 02.2
0102
0310
0405
2608
0727
0916
1544
2312
D
GC
AB
E
50˚
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P25 15-00
LLOYD’S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 14001
LLOYD’S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E G Cv WEIGHT KG
DESIGN CONSTRUCTION PRESSURE SEALED BONNET WITH INTEGRAL BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS PARABOLIC DISC OPERATION GEARBOX - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N - SA182-F22 - SA182-F91 - SA182-F316(L) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316(L)/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC F316 / STELLITED
04 BONNET ASTM-A182-F316(L)
05 STEM PACKING GRAPHITE
07 GLAND FLANGE 42CrMo4
08 GLAND ASTM-A182-F316(L)
09 GLAND BOLT / NUT ASTM-A193-B7 / A194-2H
10 STEM 17Cr (SEE BELOW)
12 YOKE / FLANGE ASTM-A216-WCB
15 POSITION INDICATOR CARBON STEEL
16 BOLT STEEL ZINC PLATED
18 RETAINING PLATE ASTM-A105N
19 GASKET ASTM-A182-F316(L)
20 THRUST RING ASTM-A182-F316(L)
21 SEGMENTAL RING ASTM-A182-F316(L)
23 PARALLEL KEY STAINLESS STEEL
26 BOLT STEEL ZINC PLATED
27 SPRING WASHER STEEL ZINC PLATED
29 BOLT STEEL ZINC PLATED
44 NAMEPLATE STAINLESS STEEL
61521 NE - 16751 NE-SB - 43.61B EMSA NGISED
BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627
OTHER END CONNECTIONS CLAMP CONNECTORS
END-TO-END DIMENSIONS MANUFACTURER’S STANDARD
PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 / 1500 / 1700 / 2500 / 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)EN RATING B160 - B500 (760)
FORGED Y-PATTERN GLOBE VALVES, PRESSURE SEAL BONNET - FIG 02.2
100 (4")
100 (4")
530 (20.87)
530 (20.87)
83 (183 LB)
78 (172 LB)
75 (2.95)
80 (3.15)
75 (2.95)
80 (3.15)
239
259
320 (12.60)
320 (12.60)
72 (2.83)
72 (2.83)
79.0 (3.11)
79.0 (3.11)
2312
0915
1644
0727
2908
0518
2126
1920
1004
0203
01
D
A
B
E
CG
50˚
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P15-H16 12-01
LLOY
D'SREGI S
TER QUAL I T Y
ASSU
RANCE
I S O 14001
LLOYD'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
18 (0.71)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
11 (0.43)
15 (0.59)
18 (0.71)
28 (1.10)
36 (1.42)
36 (1.42)
75 (2.95)
75 (2.95)
75 (2.95)
175 (6.89)
175 (6.89)
175 (6.89)
239 (9.41)
239 (9.41)
239 (9.41)
379 (14.92)
379 (14.92)
379 (14.92)
75 (2.95)
75 (2.95)
75 (2.95)
175 (6.89)
175 (6.89)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
-
-
-
-
-
-
7.9 (17.4 LB)
7.7 (17.0 LB)
7.5 (16.5 LB)
35.1 (77.4 LB)
33.9 (74.7 LB)
33.9 (74.7 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) OPTIONS PARABOLIC DISC OR CONTINUOUS BLOW DOWN VALVE (FIG 09.3) OPERATION HANDWHEEL - GEARBOX - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA182-F316(L) - SA350-LF2 - SA182-F92 - 16Mo3 TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND / FLANGE AISI 304 / CARBON STEEL
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
11 STEM / DISC 17 CR / STELLITED (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
15 POSITION INDICATOR 17 CR
23 PARALLEL KEY STAINLESS STEEL
25 SET SCREW STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
32 THIN NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL THROTTLE VALVES, ANGLE PATTERN - FIG 02.3
B
B
A
DE
F
C
02
01
23
05
04
11
14
13
12
32
09
27
07
15
25
44
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P15 12-01
LLOY
D'SREGI S
TER QUAL I T Y
ASSU
RANCE
I S O 14001
LLOYD'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
18 (0.71)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
11 (0.43)
15 (0.59)
18 (0.71)
28 (1.10)
36 (1.42)
36 (1.42)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
175 (6.89)
175 (6.89)
239 (9.41)
239 (9.41)
239 (9.41)
379 (14.92)
379 (14.92)
379 (14.92)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
175 (6.89)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
-
-
-
-
-
-
8.3 (18.1 LB)
8.2 (17.9 LB)
8.1 (17.6 LB)
35.1 (77.4 LB)
33.9 (74.7 LB)
33.9 (74.7 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) OPTIONS PARABOLIC DISC OR CONTINUOUS BLOW DOWN VALVE (FIG 09.3) OPERATION HANDWHEEL - GEARBOX - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND / FLANGE AISI 304 / CARBON STEEL
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
11 STEM / DISC 17 CR / STELLITED (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
15 POSITION INDICATOR 17 CR
23 PARALLEL KEY STAINLESS STEEL
25 SET SCREW STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
32 THIN NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL THROTTLE VALVES, ANGLE PATTERN - FIG 02.3
MAIN DIMENSIONS IN MM (INCH)
Member of Plasticon Holding BV B03-P16 15-00
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
10 (3/8”)
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
210 (8.27)
210 (8.27)
230 (9.06)
230 (9.06)
300 (11.81)
300 (11.81)
300 (11.81)
220 (8.66)
220 (8.66)
278 (10.94)
278 (10.94)
450 (17.72)
450 (17.72)
450 (17.72)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
1.3
2.5
5.8
6.5
18.6
18.6
25.4
3.9 (8.6 LB)
3.8 (8.4 LB)
7.4 (16.3 LB)
7.2 (15.9 LB)
31.0 (68.3 LB)
31.0 (68.3 LB)
29.5 (65.0 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) OPTIONS ALSO AVAILABLE IN ANGLE PATTERN WITH 75 MM (<_ 1”) / 125 MM (<_ 2”) CENTRE-TO-END ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND
(OTHERS
ON
REQUEST)
MATERIALS
BODY SA105N (1.0460) - SA182-F12 (13CrMo 4.4) - SA182-F22 (10CrMo 9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST) TRIM 17CR (1.4122) / STELLITE - F316 (1.4401) / STELLITE - 431 (1.4057) (OTHERS ON REQUEST)
STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL STOP-CHECK (SDNR), BONNETLESS - FIG 03.1
21
08
07
27
09
10
12
13
50
14
28
44
01
02
03
04
05
A
F
D
B
E
C
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P17 05-01
LLOYD'S
REGIS
TER QUAL IT Y
ASSU
RANCE
I S O 14001
LLOYD'S
REGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F G Cv WEIGHT KG
10 (3/8”)
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
236 (9.29)
236 (9.29)
291 (11.46)
291 (11.46)
469 (18.46)
469 (18.46)
469 (18.46)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
3.4 (7.5 LB)
3.3 (7.3 LB)
5.9 (13.0 LB)
5.7 (12.6 LB)
28.9 (68.7 LB)
28.9 (68.7 LB)
27.6 (60.8 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST) -MATERIALS BODY SA105N - SA182-F22 - SA182-F91 - SA182-F316(L) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 / 1500 / 1700 / 2500 / 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)
FORGED STEEL Y-PATTERN STOP-CHECK (SDNR) VALVES - FIG 03.2
44
21
28
50
13
14
10
27
09
12
07
05
04
03
02
01
08
55 o
G
F
E
C
B A
D
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
115 (4.53)
115 (4.53)
140 (5.51)
140 (5.51)
245 (9.65)
245 (9.65)
245 (9.65)
21 (0.83)
21 (0.83)
29 (1.14)
29 (1.14)
50 (1.97)
50 (1.97)
50 (1.97)
43.3 (1.70)
43.3 (1.70)
51.5 (2.02)
51.5 (2.02)
85.0 (3.35)
85.0 (3.35)
85.0 (3.35)
1.5
2.7
8.0
8.7
34.4
34.4
44.2
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P18 12-01
LLOY
D'SREGI S
TER QUAL I T Y
ASSU
RANCE
I S O 14001
LLOYD'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
18 (0.71)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
11 (0.43)
15 (0.59)
18 (0.71)
28 (1.10)
36 (1.42)
36 (1.42)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
175 (6.89)
175 (6.89)
260 (10.24)
260 (10.24)
260 (10.24)
430 (16.93)
430 (16.93)
430 (16.93)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
175 (6.89)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
-
-
-
-
-
-
8.0 (17.4 LB)
7.9 (17.2 LB)
7.8 (17.0 LB)
34.1 (75.2 LB)
32.9 (72.5 LB)
32.9 (72.5 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST) TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL STOP-CHECK (SDNR) VALVES, ANGLE PATTERN - FIG 03.3
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P18-H16 12-01
LLOY
D'SREGI S
TER QUAL I T Y
ASSU
RANCE
I S O 14001
LLOYD'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
18 (0.71)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
11 (0.43)
15 (0.59)
18 (0.71)
28 (1.10)
36 (1.42)
36 (1.42)
75 (2.95)
75 (2.95)
75 (2.95)
175 (6.89)
175 (6.89)
175 (6.89)
260 (10.24)
260 (10.24)
260 (10.24)
430 (16.93)
430 (16.93)
430 (16.93)
75 (2.95)
75 (2.95)
75 (2.95)
175 (6.89)
175 (6.89)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
-
-
-
-
-
-
7.6 (16.8 LB)
7.4 (16.3 LB)
7.2 (15.9 LB)
34.1 (75.2 LB)
32.9 (72.5 LB)
32.9 (72.5 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”) ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA182-F316(L) - SA350-LF2 - SA182-F92 - 16Mo3 TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL STOP-CHECK (SDNR) VALVES, ANGLE PATTERN - FIG 03.3
C
B
B
DE
A
F
03
02
01
09
27
07
08
05
04
28
14
50
13
12
10
21
44
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B04-P13 15-00
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
10 (3/8”)
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
132 (5.20)
132 (5.20)
154 (6.06)
154 (6.06)
192 (7.56)
192 (7.56)
192 (7.56)
220 (8.66)
220 (8.66)
278 (10.94)
278 (10.94)
450 (17.72)
450 (17.72)
450 (17.72)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
1.3
2.2
5.9
6.7
22.3
22.3
26.1
3.5 (7.7 LB)
3.4 (7.5 LB)
6.7 (14.8 LB)
6.5 (14.3 LB)
28.0 (61.7 LB)
28.0 (61.7 LB)
26.7 (58.9 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT
SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”)
ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N - SA350-LF2 - SA182-F12 - SA182-F22 - SA182-F316(L) - SA182-F51 (OTHERS ON REQUEST)
TRIM 17CR/STELLITE - F316/STELLITE - F51/STELLITE (OTHERS ON REQUEST)
STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS 5352 - (API 600) - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL STOP-CHECK (SDNR) VALVES, BONNETLESS - FIG 03.6
21
08
07
27
09
10
12
13
50
14
28
44
01
02
03
04
05
C
B A
F
DE
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P08 15-01
LLOYD'S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 14001
LLOYD'S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C1 D1 Cv WEIGHT KG C2 D2 Cv WEIGHT KG
10 (3/8") 15 (1/2") 20 (3/4") 25 (1") 32 (1-1/4") 40 (1-1/2") 50 (2") 65 (2-1/2") 80 (3")100 (4")
7 (0.28)11 (0.43)16 (0.63)20 (0.79)30 (1.18)30 (1.18)40 (1.57)50 (1.97)60 (2.36)75 (2.95)
98 (3.86) 98 (3.86)123 (4.84)123 (4.84)198 (7.80)198 (7.80)198 (7.80)292 (11.50)292 (11.50)292 (11.50)
2.0 (4.4 LB) 1.9 (4.2 LB) 3.0 (6.6 LB) 2.8 (6.2 LB) 18.9 (41.7 LB) 18.9 (41.7 LB) 17.5 (38.6 LB) 72.0 (158.7 LB) 69.0 (152.1 LB) 65.0 (143.3 LB)
108 (4.25)108 (4.25)135 (5.31)135 (5.31)213 (8.39)213 (8.39)213 (8.39)
---
2.5 (5.5 LB) 2.4 (5.3 LB) 4.5 (9.9 LB) 4.3 (9.5 LB) 21.0 (46.3 LB) 21.0 (46.3 LB) 19.5 (43.0 LB)
---
DESIGN CONSTRUCTION PRESSURE SEAL BONNET
SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5")
MATERIALS Y-PATTERN SA105N - SA182-F22 - SA182-F91 - SA182-F316(L) (OTHERS ON REQUEST)
STRAIGHT BODY SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST)
TRIM SPRING ASSISTED STELLITE PISTON (FIG 04) OR STAINLESS STEEL BALL (FIG 05)
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
17 SPRING AISI 302
18 BONNET ASTM-A182-F316(L)
19 GASKET ASTM-A182-F316(L)
20 CAP CARBON STEEL
27 SPRINGWASHER STEEL ZINC PLATED
32 NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
61521 NE - 0483 NID - 16751 NE-SB - 43.61B EMSA NGISEDBUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)
66221 NE - 0323 NID - 895 IPA - 43.61B EMSA GNITSET ERUSSERP
ASME CLASS 900 - 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL STRAIGHT / Y-PATTERN CHECK VALVES - FIG 04.1 / 04.2
44
01
02
03
17
18
19
20
27
32
44
01
02
03
17
18
19
20
27
32
C2
D2
AB
C1
D1
AB
1.5 2.7 8.0 8.7 34.4 34.4 44.2 95.9 142.4 239.2
115 (4.53)115 (4.53)140 (5.51)140 (5.51)245 (9.65)245 (9.65)245 (9.65)320 (12.60)320 (12.60)320 (12.60)
11 (0.43)11 (0.43)18 (0.71)18 (0.71)36 (1.42)36 (1.42)36 (1.42)50 (1.97)60 (2.36)75 (2.95)
210 (8.27)210 (8.27)230 (9.06)230 (9.06)300 (11.81)300 (11.81)300 (11.81)
---
1.3 2.5 6.2 6.8 23.6 23.6 31.0
---
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B04-P06 15-02
LLOYD'S
REG
I S
TER QUAL IT Y
ASSURANCE
I SO 14001
LLOYD'SREGI S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E P TO OPEN Cv WEIGHT KG
10 (3/8”)
15 (1/2”)
20 (3/4”)
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
132 (5.20)
132 (5.20)
154 (6.06)
154 (6.06)
192 (7.56)
192 (7.56)
192 (7.56)
108 (4.25)
108 (4.25)
135 (5.31)
135 (5.31)
213 (8.39)
213 (8.39)
213 (8.39)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
0.5 BAR
0.5 BAR
0.5 BAR
0.5 BAR
0.5 BAR
0.5 BAR
0.5 BAR
1.3
2.2
5.9
6.7
22.3
22.3
26.1
2.1 (4.6 LB)
2.0 (4.4 LB)
3.7 (8.2 LB)
3.5 (7.7 LB)
18.0 (39.7 LB)
18.0 (39.7 LB)
16.7 (36.8 LB)
DESIGN CONSTRUCTION PRESSURE SEAL BONNET
SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5”)
MATERIALS BODY SA105N - SA350-LF2 - SA182-F12 - SA182-F22 - SA182-F316(L) - SA182-F51 (OTHERS ON REQUEST)
TRIM SPRING ASSISTED STELLITE PISTON (FIG 04.6) OR STAINLESS STEEL BALL (FIG 05.6)
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 DISC STELLITE
17 SPRING AISI 302
18 BONNET ASTM-A182-F316(L)
19 GASKET ASTM-A182-F316(L)
20 CAP CARBON STEEL
27 SPRINGWASHER STEEL ZINC PLATED
32 NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
DESIGN ASME B16.34 - BS 5352 - (API 600) - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL CHECK VALVES - FIG 04.6
44
01
02
03
17
18
19
20
27
32
AB
DE
C
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P27 15-00
LLOYD’S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 14001
LLOYD’S
REGIS
TER QUAL I T Y
ASSURANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D Cv WEIGHT KG
10 (3/8")
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
11 (0.43)
11 (0.43)
18 (0.71)
18 (0.71)
36 (1.42)
36 (1.42)
36 (1.42)
7 (0.28)
11 (0.43)
16 (0.63)
20 (0.79)
30 (1.18)
30 (1.18)
40 (1.57)
115 (4.53)
115 (4.53)
140 (5.51)
140 (5.51)
245 (9.65)
245 (9.65)
245 (9.65)
98 (3.86)
98 (3.86)
123 (4.84)
123 (4.84)
198 (7.80)
198 (7.80)
198 (7.80)
1.5
2.7
8.0
8.7
34.4
34.4
44.2
2.0 (4.4 LB)
1.9 (4.2 LB)
3.0 (6.6 LB)
2.8 (6.2 LB)
18.9 (41.7 LB)
18.9 (41.7 LB)
17.5 (38.6 LB)
DESIGN CONSTRUCTION PRESSURE SEAL BONNET
SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5")
MATERIALS BODY SA105N - SA182-F22 - SA182-F91 - SA182-F316(L) (OTHERS ON REQUEST)
TRIM SPRING ASSISTED STAINLESS STEEL BALL (FIG 05) OR STELLITE PISTON (FIG 04)
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 BALL F316(L)
17 SPRING AISI 302
18 BONNET ASTM-A182-F316(L)
19 GASKET ASTM-A182-F316(L)
20 CAP CARBON STEEL
27 SPRINGWASHER STEEL ZINC PLATED
32 NUT STEEL ZINC PLATED
44 NAMEPLATE STAINLESS STEEL
61521 NE - 0483 NID - 16751 NE-SB - 43.61B EMSA NGISEDBUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 - 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL Y-PATTERN BALL CHECK VALVES - FIG 05.2
32
27
20
19
18
17
03
02
01
44
B A
D
C
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P10 15-00
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E F Cv WEIGHT KG
10 (3/8")
15 (1/2")
20 (3/4")
25 (1")
32 (1-1/4")
40 (1-1/2")
50 (2")
-
-
-
-
28.5 (1.12)
28.5 (1.12)
38 (1.50)
7 (0.28)
11 (0.43)
15 (0.59)
19 (0.75)
30 (1.18)
30 (1.18)
40 (1.57)
132 (5.20)
132 (5.20)
154 (6.06)
154 (6.06)
192 (7.56)
192 (7.56)
192 (7.56)
225 (8.86)
225 (8.86)
282 (11.10)
282 (11.10)
455 (17.91)
455 (17.91)
455 (17.91)
25 (0.98)
25 (0.98)
38 (1.50)
38 (1.50)
72 (2.83)
72 (2.83)
72 (2.83)
150 (5.91)
150 (5.91)
200 (7.87)
200 (7.87)
350 (13.78)
350 (13.78)
350 (13.78)
2.2
6.0
11.2
21.5
42.9
42.9
77.8
3.5 (7.7 LB)
3.4 (7.5 LB)
6.7 (14.8 LB)
6.5 (14.3 LB)
30.0 (66.1 LB)
30.0 (66.1 LB)
28.0 (61.7 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT
SEAT HIGH TEMPERATURE VACUUM BRAZED IN STELLITE SEAT OR WELDED IN STELLITED SEAT RINGS
OPERATION OPTIONAL NON-ROTATING STEM FOR ELECTRIC OR PNEUMATIC ACTUATOR
ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N - SA350-LF2 - SA182-F12 - SA182-F22 - SA182-F316(L) - SA182-F51 - SA182-F91
TRIM 17CR/STELLITE - F316/STELLITE - F51/STELLITE (OTHERS ON REQUEST)
STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE(D)
03 WEDGE STELLITE
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND FLANGE CARBON STEEL
08 GLAND AISI 304
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
10 STEM 17 CR (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
21 NUT STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
28 SPRINGWASHER STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
50 PIN HARDENED STEEL
DESIGN ASME B16.34 - BS-EN 15761 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 1500 / 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL GATE VALVES, BONNETLESS - FIG 06.6
21
08
07
27
09
10
12
13
50
14
28
44
01
02
03
04
05
C
B
F
ED
A
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P22 13-00
LLOYD’S
REGIS
T ER QUAL IT Y
ASSURANCE
I SO 14001
LLOYD’S
REG
I S
TER QUAL I TY
ASSU
RANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE CLASS A B C D E F Cv WEIGHT KG
2-1/2” (65)
3” (80)
4” (100)
2-1/2” (65)
3” (80)
4” (100)
1500LBS
1500LBS
1500LBS
2500LBS
2500LBS
2500LBS
52 (2.05)
62 (2.44)
80 (3.15)
52 (2.05)
52 (2.05)
70 (2.76)
55 (2.17)
65 (2.56)
85 (3.35)
55 (2.17)
55 (2.17)
75 (2.95)
305 (12)
305 (12)
406 (16)
305 (12)
305 (12)
406 (16)
93 (3.7)
93 (3.7)
109 (4.3)
93 (3.7)
93 (3.7)
109 (4.3)
575 (22.6)
568 (22.3)
645 (25.4)
575 (22.6)
563 (22.2)
640 (25.2)
350 (13.8)
350 (13.8)
350 (13.8)
350 (13.8)
350 (13.8)
350 (13.8)
228
325
545
228
228
412
82 (181 LB)
76 (168 LB)
115 (254 LB)
82 (181 LB)
82 (181 LB)
122 (269 LB)
DESIGN CONSTRUCTION PRESSURE SEAL BONNET AND INTEGRAL BACKSEAT OPTIONS AUXILIARY CONNECTIONS AND/OR PROTECTION AGAINST FLUID THERMAL EXPANSION OPERATION HANDWHEEL - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - POSITION INDICATOR - STEM COVER (OTHERS ON REQUEST)
MATERIALS BODY / BONNET (S)A105N (1.0460) - (S)A182-F22 (10CrMo9.10) - (S)A182-F91 (1.4903) - (S)A182-F92 - (S)A182-F316(L) (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY (S)A105N (SEE BELOW)02 SEAT RING A106 + STELLITE #1203 PARALLEL DISC STELLITE #604 BONNET ASTM - A10505 STEM PACKING GRAPHITE/316 (GNHD)06 SPRING INCONEL 75007 GLAND FLANGE 42CrMo408 GLAND AISI 30409 GLAND BOLT / NUT ASTM-A193-B7 / A194-2H10 STEM 17Cr / 1.412211 TOPFLANGE CARBON STEEL12 YOKE BAR 17Cr / 1.412213 YOKE SLEEVE ALU-BRONZE14 HANDWHEEL CARBON STEEL15 GUIDING-PLATE CARBON STEEL16 DISC HOLDER ASTM-A182-F31618 RETAINING PLATE C22.819 GASKET GRAPHITE / 31620 THRUST RING ASTM-A182-F31621 SEGMENTAL RING 1.492324 PARALLEL KEY STAINLESS STEEL26 NEEDLE BEARING -27 SPRING WASHER STEEL ZINC PLATED28 BOLT STEEL ZINC PLATED29 BOLT STEEL ZINC PLATED32 THIN NUT STEEL ZINC PLATED44 NAME PLATE STAINLESS STEEL
DESIGN ASME B16.34 - EN 12516 - (BS-EN 10434) - API 600
BUTTWELDING ENDS ASME B16.25 - EN 12627 - DIN-EN 9692-1
END-TO-END DIMENSIONS ASME B16.10 - EN 12982 / EN 558-2 - MANUFACTURERS STANDARD
PRESSURE TESTING ASME B16.34 - EN 12266 - API 598
ASME CLASS 1500 / 2500 (4500)EN RATING PN160 - PN500 (B760)
FORGED STEEL GATE VALVES, PRESSURE SEAL BONNET – FIG 06.6
030201
1706
10041920210518290807
091512
132628
29
1432
24
11
27
44
16
E
C
D (O
PEN)
nB
nA
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P09 15-00
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE A B C D E WEIGHT KG
10 (3/8") 15 (1/2") 20 (3/4") 25 (1") 32 (1-1/4") 40 (1-1/2") 50 (2") 65 (2-1/2") 80 (3") 100 (4")
18 (0.71)18 (0.71)18 (0.71)18 (0.71)36 (1.42)36 (1.42)36 (1.42)50 (1.97)60 (2.36)75 (2.95)
7 (0.28)11 (0.43)16 (0.63)20 (0.79)30 (1.18)30 (1.18)40 (1.57)50 (1.97)60 (2.36)75 (2.95)
140 (5.51)140 (5.51)140 (5.51)140 (5.51)245 (9.65)245 (9.65)245 (9.65)320 (12.60)320 (12.60)320 (12.60)
123 (4.84)123 (4.84)123 (4.84)123 (4.84)198 (7.80)198 (7.80)198 (7.80)292 (11.50)292 (11.50)292 (11.50)
29 (1.14)29 (1.14)29 (1.14)29 (1.14)50 (1.97)50 (1.97)50 (1.97)72 (2.83)72 (2.83)72 (2.83)
3.3 (7.3 LB) 3.2 (7.1 LB) 3.0 (6.6 LB) 2.8 (6.2 LB) 18.9 (41.7 LB) 18.9 (41.7 LB) 17.5 (38.6 LB) 70.0 (154.3 LB) 67.0 (147.7 LB) 63.0 (138.9 LB)
DESIGN CONSTRUCTION PRESSURE SEAL BONNET
SCREEN SLOTTED TUBE (0.1, 0.2, 0.3 OR 0.5 MM PERFORATION), DESIGNED FOR MAXIMUM DIFFERENTIAL PRESSURE
OPTIONS BONNET WITH 3/8" BUTTWELDING DRAIN CONNECTION
MATERIALS BODY SA105N - SA182-F22 - SA182-F91 - SA182-F316(L) (OTHERS ON REQUEST)
01 BODY VARIOUS (SEE BELOW)
18 BONNET ASTM-A182-F316(L)
19 GASKET ASTM-A182-F316(L)
20 CAP AISI 304 (>2'' CS)
27 SPRINGWASHER STEEL ZINC PLATED
32 NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
56 SCREEN ASTM-A182-F316(L)
DESIGN ASME B16.34 - BS-EN 15761 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS API OR NPT FEMALE THREADS / CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 - 2700 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL Y-PATTERN STRAINERS - FIG 08.2
56
18
19
20
44
27
32
01
ED
A
B
C
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P11-H16 12-01
LLOYD'S
REGIS
T ER QUAL IT Y
ASSURANCE
I SO 14001
LLOYD'S
REG
I S
TER QUAL I TY
ASSU
RANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE SEATBORE-A B C D E F WEIGHT KG
20 (3/4")
25 (1")
32 (1-1/4")
32 (1-1/4")
40 (1-1/2")
40 (1-1/2")
50 (2")
50 (2")
3-16 (0.12 - 0.63)
3-18 (0.12 - 0.71)
3-18 (0.12 - 0.71)
19-28 (0.75 - 1.10)
3-18 (0.12 - 0.71)
19-36 (0.75 - 1.42)
3-18 (0.12 - 0.71)
19-36 (0.75 - 1.42)
16 (0.63)
20 (0.79)
20 (0.79)
28 (1.10)
20 (0.79)
36 (1.42)
20 (0.79)
36 (1.42)
75 (2.95)
75 (2.95)
125 (4.92)
175 (6.89)
125 (4.92)
175 (6.89)
125 (4.92)
175 (6.89)
239 (9.41)
239 (9.41)
239 (9.41)
379 (14.92)
239 (9.41)
379 (14.92)
239 (9.41)
379 (14.92)
75 (2.95)
75 (2.95)
125 (4.92)
175 (6.89)
125 (4.92)
175 (6.89)
125 (4.92)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
200 (7.87)
350 (13.78)
200 (7.87)
350 (13.78)
7.7 (17.0 LB)
7.5 (16.5 LB)
11.3 (25.1 LB)
35.1 (78.0 LB)
9.6 (25.1 LB)
33.9 (75.3 LB)
11.7 (26.0 LB)
33.9 (75.3 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS STANDARD PLUG OR THROTTLE TYPE DISC AND/OR TANDEM BLOW DOWN OPERATION HANDWHEEL - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA182-F316(L) - SA350-LF2 - SA182-F92 - 16Mo3 TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 VENTURI ASTM-A182-F316
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND / FLANGE AISI 304 / CARBON STEEL
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
11 STEM / DISC 17 CR / STELLITED (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
15 POSITION INDICATOR 17 CR
23 PARALLEL KEY STAINLESS STEEL
25 SET SCREW STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
32 THIN NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
DESIGN ASME B16.34 - BS-EN 15761 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 - 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL CONT. BLOW DOWN VALVES, BONNETLESS - FIG 09.3
02
09
44
14
13
12
11
15
25
27
07
23
05
04
03
01
32
B
A
DE
C
F
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P11 12-01
LLOYD'S
REGIS
T ER QUAL IT Y
ASSURANCE
I SO 14001
LLOYD'S
REG
I S
TER QUAL I TY
ASSU
RANCE
I SO 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
NOM. SIZE SEATBORE-A B C D E F WEIGHT KG
20 (3/4")
25 (1")
32 (1-1/4")
32 (1-1/4")
40 (1-1/2")
40 (1-1/2")
50 (2")
50 (2")
3-16 (0.12 - 0.63)
3-18 (0.12 - 0.71)
3-18 (0.12 - 0.71)
19-28 (0.75 - 1.10)
3-18 (0.12 - 0.71)
19-36 (0.75 - 1.42)
3-18 (0.12 - 0.71)
19-36 (0.75 - 1.42)
16 (0.63)
20 (0.79)
20 (0.79)
28 (1.10)
20 (0.79)
36 (1.42)
20 (0.79)
36 (1.42)
(4.13)
(4.13)
105 (4.13)
175 (6.89)
105 (4.13)
175 (6.89)
105 (4.13)
175 (6.89)
239 (9.41)
239 (9.41)
239 (9.41)
379 (14.92)
239 (9.41)
379 (14.92)
239 (9.41)
379 (14.92)
105 (4.13)
105 (4.13)
105 (4.13)
175 (6.89)
105 (4.13)
175 (6.89)
105 (4.13)
175 (6.89)
200 (7.87)
200 (7.87)
200 (7.87)
350 (13.78)
200 (7.87)
350 (13.78)
200 (7.87)
350 (13.78)
8.2 (17.9 LB)
8.1 (17.6 LB)
10.4 (22.7 LB)
35.1 (77.4 LB)
10.4 (22.7 LB)
33.9 (74.7 LB)
10.4 (22.8 LB)
33.9 (74.7 LB)
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN SEAT RING WITH THICKNESS > 5 MM (1/5") OPTIONS STANDARD PLUG OR THROTTLE TYPE DISC AND/OR TANDEM BLOW DOWN OPERATION HANDWHEEL - ELECTRIC OR PNEUMATIC ACTUATOR ACCESSORIES LIMIT SWITCHES - LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY TRIM 17CR/STELLITE - F316/STELLITE (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 SEAT STELLITE
03 VENTURI ASTM-A182-F316
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND / FLANGE AISI 304 / CARBON STEEL
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
11 STEM / DISC 17 CR / STELLITED (SEE BELOW)
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
15 POSITION INDICATOR 17 CR
23 PARALLEL KEY STAINLESS STEEL
25 SET SCREW STEEL ZINC PLATED
27 SPRINGWASHER STEEL ZINC PLATED
32 THIN NUT STEEL ZINC PLATED
44 NAMEPLATE ALUMINIUM
DESIGN ASME B16.34 - BS-EN 15761 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN-EN 9692-1 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 - 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL CONT. BLOW DOWN VALVES, BONNETLESS - FIG 09.3
105
105
SA105N (1.0460) - SA182-F12 (13CrMo4.5) - SA182-F22 (10CrMo9.10) - SA182-F91 (1.4903) (OTHERS ON REQUEST)
MAIN DIMENSIONS IN MM (INCH)
Member of Indutrade AB B03-P13 05-01
LLOY
D'S
REGI S
TER QUAL IT Y
ASSU
RANCE
I S O 14001
LLOYD'S
REG
I S
T ER QUAL I TY
ASSURANCE
I S O 9001
FEATURES
MATERIALS
STANDARDS
HP Valves Oldenzaal BV, P.O. Box 151, 7570 AD Oldenzaal, The NetherlandsPhone: +31 (0)541 519555, Fax: +31 (0)541 522045, E-mail: [email protected]: www.hpvalves.com
DESIGN CONSTRUCTION INTEGRAL BONNET (BONNETLESS) AND LOOSE BACKSEAT (FIXED BACKSEAT OPTIONAL) SEAT RING HIGH TEMPERATURE VACUUM BRAZED IN FULL STELLITE 3-STAGE SEAT
OPERATION HANDWHEEL -
ELECTRIC OR PNEUMATIC ACTUATORACCESSORIES LIMIT SWITCHES
- LOCKING DEVICE - LIVE LOADED GLAND (OTHERS ON REQUEST)
MATERIALS BODY SA105N - SA182-F12 - SA182-F22 - SA182-F91 (OTHERS ON REQUEST) STEM PACKING GRAPHITE WITH INTEGRAL OR STAINLESS STEEL REINFORCED ANTI EXTRUSION RINGS
01 BODY VARIOUS (SEE BELOW)
02 3-STAGE SEAT 1.4923 / STELLITED
04 LOOSE BACKSEAT AISI 304
05 STEM PACKING GRAPHITE
07 GLAND / FLANGE AISI 304 / CARBON STEEL
09 GLAND BOLT / NUT ASTM-A193-B7 / ASTM-A194-2H
11 STEM / DISC 1.4923 / HARDENED
12 YOKE CARBON STEEL
13 YOKE SLEEVE ALUMINIUM-BRONZE
14 HANDWHEEL CARBON STEEL
15 POSITION INDICATOR 17 CR
23 PARALLEL KEY STAINLESS STEEL
25
SET SCREW
STEEL ZINC PLATED
26
BEARING
-
27
SPRINGWASHER
STEEL ZINC PLATED
32
STEEL ZINC PLATED
DESIGN ASME B16.34 - BS 5352 - DIN 3840 - EN 12516BUTTWELDING ENDS ASME B16.25 - DIN 2559 - EN 12627SOCKET WELDING ENDS ASME B16.11 - EN 12760OTHER END CONNECTIONS CLAMP CONNECTORS / FLANGED RTJ OR RFEND-TO-END DIMENSIONS MANUFACTURER’S STANDARD (FLANGED VALVES ACC. THE RELEVANT STANDARD)PRESSURE TESTING ASME B16.34 - BS 6755 - API 598 - DIN 3230 - EN 12266
ASME CLASS 900 - 2500 (4500)API CLASS 6.000 PSI (10.000 PSI)DIN CLASS PN 160 - PN 640
FORGED STEEL 3-STAGE BLOW DOWN VALVES, BONNETLESS - FIG 09.3.9
F
D
C
B
E
14
32
24
26
13
12
11
27
15
25
07
23
05
02
01
09
04
44
24 PARALLEL KEY STAINLESS STEEL
STEEL ZINC PLATED
THIN NUT
44
NAMEPLATE
ALUMINIUM
NOM. SIZE FLOW-AREA B C D E F WEIGHT KG
25 (1”)
32 (1-1/4”)
40 (1-1/2”)
50 (2”)
132 mm
132 mm
405 mm
405 mm
20 (0.79)
25 (0.98)
30 (1.18)
36 (1.42)
175 (6.89)
175 (6.89)
175 (6.89)
175 (6.89)
379 (14.92)
379 (14.92)
379 (14.92)
379 (14.92)
175 (6.89)
175 (6.89)
175 (6.89)
175 (6.89)
350 (13.78)
350 (13.78)
350 (13.78)
350 (13.78)
36.6 (80.7 LB)
36.2 (79.8 LB)
34.2 (75.4 LB)
33.8 (74.5 LB)
2
2
2
2
B03-06-01
