15
Forged Gate, Globe & Check Valve Forge Gate Valve (Model – 1300) Forge Globe Valve (Model – 3100) Forge Check Valve (Model – 6300) Sizes: - 1/ 2” to 2” (15mm to 50mm) Rating: - Class 800 & Class 1500 Forged Steel Valves Information:- www.invacovalves.com [email protected] [email protected] +91 9920 900 311 +91 9619 010 130

Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

  • Upload
    others

  • View
    24

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

Forged Gate, Globe & Check ValveForge Gate Valve (Model – 1300)

Forge Globe Valve (Model – 3100)

Forge Check Valve (Model – 6300)

Sizes: - 1/ 2” to 2” (15mm to 50mm)Rating: - Class 800 & Class 1500

Forged Steel Valves

Information:[email protected]@gmail.com+91 9920 900 311+91 9619 010 130

Page 2: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

ContentsCompany Overview 01

Product Range 01

Quality Standards 02

GA Drawing (Gate Valve) 03

Material of Construction (Gate) 04

Dimensions (Gate Valve) 05

GA Drawing (Globe Valve) 06

Material of Construction (Globe) 07

Dimensions (Globe) 08

GA Drawing (Check Valve) 09

Material of Construction (Check) 10

Dimensions (Check valve) 11

Quality Policy 12

Page 3: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

1

Company Overview:

“INVACO” (Industrial Valve Company) is leading manufacturer of industrial valves. INVACO is anexport oriented valve manufacturer producing top quality valves. INVACO valves are designed, developed,manufactured and tested under rigorous 100% quality control inspections with full traceability of NACE,chemical, mechanical, hydro & air test records. All INVACO valves are produced in accordance withinternational standards like API, ASME, ANSI, AWWA, MSS, DIN, EN, ISO, BS, JIS, AS, IS etc.INVACO committed to excellence by manufacturing top quality valves to meet customer’s needs withlow cost, on-time delivery & providing finest service in industry. INVACO manufacture Ball valves (Floating &Trunnion Mounted), Butterfly Valves (Damper, Sleeved, Double offset & Triple Offset), Gate Valves, GlobeValves & Check Valves for oil & gas, petrochemicals, refineries, power plants, water treatment plants,chemical, paper & pulp, sugar, steel, pharma, pipe- line transmission and other process industries.“INVACO” (Industrial Valve Company) is specialized in design, manufacturing & testing of CAST &FORGED Steel Gate, Globe & Check Valves. All valves are designed as per ASME B16.34, API 600, API 602, API6D,BS 1861, BS 1873 and follows ISO 9001:2015 Quality Management Systems. INVACO, manufactureForge Gate, Globe & Check valve size from 1/ 2” to 2” (15mm to 50mm) with pressure range from Class 800to Class 1500 and equivalent EN pressure ratings. Gate , Globe & Check valves produced from FORGEDmaterials like A105, LF2, F304, F316, F51, F11, F53, F55 and other special materials.INVACO (Industrial Valve Company) aims to produced a zero defect valves for long life and reliableservices. Making continual improvements aims towards to minimize the Total Ownership Cost for valuedcustomers. Also aims to established sales and services of valves & actuators worldwide. INVACO is ready toserve various global industries towards a sustainable new world.This catalog provides basic information of Gate, Globe & Check Valves. Every effort has been made tomaintain technical accuracies however INVACO has reserve rights to make any change in design andmaterials without prior notice.Product Range for GGC (Gate, Globe & Check Valve):

ValveDesign

ASME CLASS / Size – in ( mm)150 300 600 800 900 1500 2500GateValve 2” – 24”(50 – 600 ) 2” – 24”(50 – 600 ) 2” – 24”(50 – 600 ) ---- 2” – 24”(50 – 600 ) 2” – 12”(50 – 300 ) 2” – 12”(50 – 300 )GlobeValve 2” – 24”(50 – 600 ) 2” – 24”(50 – 600 ) 2” – 24”(50 – 600 ) ---- 2” – 18”(50 – 450 ) 2” – 16”(50 – 400 ) 2” – 12”(50 – 300 )CheckValve 2” – 24”(50 – 600 ) 2” – 24”(50 – 600 ) 2” – 24”(50 – 600 ) ---- 2” – 16”(50 – 400 ) 2” – 14”(50 – 350 ) 2” – 10”(50 – 250 )ForgeValve( GGC ) ---- ---- ---- 1/2” – 2”( 15 – 50 ) 1/2” – 2”( 15 – 50 ) 1/2” – 2”( 15 – 50 ) ----

Page 4: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

2

Quality Standards for GGC (Gate, Globe & Check Valve):

Design Standards:-

Gate Valve Globe Valve Check ValveAPI 600, API 602,ASME B16.34, BS 1414,ISO 10434, BS 5352 ASME B16.34, BS 1873,API 600 , API 602,BS 5352 ASME B 16.34, API 6D,BS 1868, API 594,API 602, BS 5352Common Standards:-API 598 – Valve Inspection and Testing.ASME B 16.5 – Pipe Flanges and Flanged Fittings.ASME B 16.47 – Large Diameter Steel Flanges.ASME B 16.10 – Face to Face and End to End Dimension of Valves.ASME B 16.25 – Butt Welding Ends.ASME B 16.11 – Forged Steel Socket Welding and threaded Fittings.ASME B 1.20.1 – Pipe Threads for general Purposes.MSS SP- 6 – Standards Finishes for contact surface for flanges.MSS SP- 25 – Standard marking system for valves, fittings, flanges.MSS SP- 55 – Steel Casting – Visual methods for Evaluation of surface Irregularities.MSS SP- 44 – Steel Pipeline Flanges.MSS SP – 61 – Pressure Testing of Valves.BS 6755 – Testing of Valves.BS EN 12266 – Industrial Valves – Testing of Valves.BS EN 6364 – Valves for Cryogenic Services.BS EN 558 – Face to Face & Centre to face dimensions soft, metal valves for use in pipeSystems.BS EN 1092 – Flanges & their joints- Circular Flanges for Pipes, valves, Fittings & Accessories.BS EN 12516 – Industrial Valves – Shell Design Strength.ISO 9001:2015 – Quality management System – Requirements.ISO 5208 – Industrial valves pressure testing for metallic valves.NACE MR0175 – Petroleum & Natural Gas industries materials for use in H2S containingEnvironments in Oil and Gas production.NACE TM 0284 – Standard Test Method ( HIC).NACE TM 0177 – Standard Test Method.NACE MR 0103 – Standard

Page 5: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

3

GA Drawing for Forged Gate Valve (Model – 1300):

Design Features Reference StandardsSize: - 1/2” to 2” (15mm to 50mm) Design: - ASME B16.34, API 602Rating: - Class 800 & Class 1500 Face to Face: -Manufacturing StandardVacuum Seal Arrangement Testing: - API 598Stallite or Hardface Socket Weld End :- ASME B 16.11Outside Screw & Yoke , Bolted Bonnet But Weld End :- ASME B 16.25Operations: - Handwheel Screwed End ( F-NPT) :- ASME B 1.20.1

Page 6: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

4

Material of Construction for Forged Gate Valve (Model – 1300):

Bill Of Material ( Forged Gate Valves)

Sr.No. Part Carbon Steel Low Temperature

Steel Stainless Steel1 Body ASTM A 105N ASTM A 350 Gr. LF2 ASTM A 182 Gr. F316 /F3042 Seat Ring AISI410/ SS304 / SS316 SS316 SS304, SS3163 Wedge AISI410/ SS304 / SS316 SS316 SS304, SS3164 Spindle AISI410 / SS304 / SS316 A182 Gr. F316 A 182 Gr.F316 / F3045 Gasket SPWG + (SS304 /SS316) SPWG + SS316 SPWG + ( SS316 / SS304)6 Bonnet ASTM A 105N ASTM A 350 Gr. LF2 ASTM A 182 Gr. F316 /F3047 Bolt A193 Gr. B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B88 Packing Graphite Graphite Graphite9 Screw A193 Gr. B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B810 Washer Carbon Steel(Galvanized) Carbon Steel(Galvanized) Stainless Steel11 Gland Bush AISI 410 / SS 304 /SS316 SS316 SS 316/30412 Gland Flange A 105N A 350 Gr. LF2 SS 316/30413 Eye Bolt Nut A194 Gr 2H , 2HM A 194 Gr. 4L ,7M, 4 A 194 Gr. 8MA ,14 Eye Bolt A193 Gr B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B815 Yoke Sleeve S.G. Iron S.G. Iron S.G. Iron16 Hand Wheel Malleable Iron Malleable Iron Malleable Iron17 BearingWasher Carbon Steel Carbon Steel Stainless Steel18 Hand WheelNut A194 Gr 2H , 2HM A 194 Gr. 4L ,7M, 4 A 194 Gr. 8MA , 8MNOTE:** All API 600 Trims are available as per customer requirement.** Stellite or Hardface are optional and as per customer requirement.** "INVACO" reserve rights to change MATERIALS & DESIGN anytime without prior notice.

Page 7: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

5

Dimensions for Forged Gate Valve (Model 1300):–

Design & Features:-Design: - ASME B.16.34, API 602, BS 5352Face to Face: - Manufacturing StandardTesting: - API 598.But-Weld End: - ASME B16.25Socket End :- ASME B 16.11Screwed End ( F-NPT):- ASME B 1.20.1Bolted Bonnet, Outside Screw & Yoke Pattern.Rising Stem & HandwheelFlexible or Solid Wedge Design.Stellite or HardFaceLantern Ring Design for Vacuum ServicesExtended Bonnet Design.Low Emission Design

Size F(mm) L(mm) H(mm) Socket End Screwed End(F-NPT) But-WeldEndin mm W(mm) S(mm) F-NPT N(mm)½ 15 85 165 95 21.8 9.5 ½ 13.5AvailableonRequest

¾ 20 90 175 95 27.2 12.5 ¾ 141 25 103 215 105 33.9 12.5 1 17.31½ 40 128 275 150 48.8 12.5 1½ 18.32 50 142 285 150 61.2 16 2 19.3Note:- ** INVACO reserves the right to change the dimensions, materials, design & other informationanytime without prior notice.

Page 8: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

6

GA Drawing for Forged Globe Valve (Model – 3100):

Design Features Reference StandardsSize: - 1/2” to 2” (15mm to 50mm) Design: - ASME B16.34,API 602, BS5352, BS 1873Rating: - Class 800 & Class 1500 Face to Face: -Manufacturing StandardVacuum Seal Arrangement Testing: - API 598Stallite or Hardface Socket Weld End :- ASME B 16.11Outside Screw & Yoke , Bolted Bonnet But Weld End :- ASME B 16.25Operations: - Handwheel, Screwed End ( F-NPT) :- ASME B 1.20.1

Page 9: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

7

Material of Construction for Forged Globe Valve (Model – 3100):

Bill Of Material ( Forged Globe Valves)Sr.No. Part Carbon Steel Low Temperature Steel Stainless Steel1 Body ASTM A 105N ASTM A 350 Gr. LF2 ASTM A 182 Gr. F316 /F3042 Seat Ring AISI410/ SS304 / SS316 SS316 SS304, SS3163 Plug AISI410/ SS304 / SS316 SS316 SS304, SS3164 Spindle AISI410 / SS304 /SS316 A182 Gr. F316 A 182 Gr.F316 / F3045 Gasket SPWG + (SS304/SS316) SPWG + SS316 SPWG + (SS316 /SS304)6 Bonnet A105N A 350 Gr. LF2 A 182 Gr. F316 / F3047 Bolt A193 Gr. B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B88 Packing Graphite Graphite Graphite9 Screw A193 Gr. B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B810 Washer Carbon Steel(Galvanized) Carbon Steel(Galvanized) Stainless Steel11 Gland Bush AISI 410 / SS 304 /SS316 SS316 SS 316/30412 Gland Flange A 105N A 350 Gr. LF2 SS 316/30413 Eye Bolt Nut A194 Gr 2H , 2HM A 194 Gr. 4L ,7M, 4 A 194 Gr. 8MA , 8M14 Eye Bolt A193 Gr B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B815 Yoke Sleeve S.G. Iron S.G. Iron S.G. Iron16 Hand Wheel Malleable Iron Malleable Iron Malleable Iron17 Washer Carbon Steel Carbon Steel Stainless Steel18 Hand WheelNut A194 Gr 2H , 2HM A 194 Gr. 4L ,7M, 4 A 194 Gr. 8MA , 8M

NOTE:** All API 600 Trims are available as per customer requirement.** Stellite or Hardface are optional and as per customer requirement.** "INVACO" reserve rights to change MATERIALS & DESIGN anytime without prior notice.

Page 10: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

8

Dimensions for Forged Globe Valve (Model 3100):–

Design & Features:-Design: - ASME B.16.34, API 602, BS 5352Face to Face: - Manufacturing StandardTesting: - API 598.But-Weld End: - ASME B16.25Socket End :- ASME B 16.11Screwed End ( F-NPT):- ASME B 1.20.1Bolted Bonnet, Outside Screw & YokeRising Stem & HandwheelStellite or HardFaceLantern Ring Design for Vacuum ServicesExtended Bonnet Design.Low Emission Design

Size F(mm) L(mm) H(mm) Socket End Screwed End(F-NPT) But-WeldEndin mm W(mm) S(mm) F-NPT N(mm)½ 15 85 145 95 21.8 9.5 ½ 13.5AvailableonRequest

¾ 20 90 155 95 27.2 12.5 ¾ 141 25 103 210 105 33.9 12.5 1 17.31½ 40 128 265 150 48.8 12.5 1½ 18.32 50 142 275 150 61.2 16 2 19.3Note:- ** INVACO reserves the right to change the dimensions, materials, design & other informationanytime without prior notice.

Page 11: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

9

GA Drawing for Forged Check Valve (Model – 6300):

Page 12: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

10

Design Features Reference StandardsSize: - 1/2” to 2” (15mm to 50mm) Design: - ASME B16.34, BS 5352Rating: - Class 800 & Class 1500 Face to Face: -Manufacturing StandardTongue & Groove Design Testing: - API 598Stallite or Hardface Socket Weld End :- ASME B 16.11Bolted Cover But Weld End :- ASME B 16.25Operations: - Self Operated Screwed End ( F-NPT) :- ASME B 1.20.1Material of Construction for Forged Check Valve (Model – 6300):

Bill Of Material ( Forged Check Valves)

Sr. No. Part Carbon Steel Low Temperature Steel Stainless Steel

1 Body ASTM A 105N ASTM A 350 Gr. LF2 ASTM A 182 Gr. F316 / F3042 Seat Ring AISI410/ SS304 / SS316 SS316 SS304, SS3163 Disc AISI410/ SS304 / SS316 SS316 SS304, SS3164 Gasket SPWG + (SS304 /SS316) SPWG + SS316 SPWG + (SS316 /SS304)5 Cover ASTM A 105N ASTM A 350 Gr. LF2 ASTM A 182 Gr. F316 / F3046 Bolt A193 Gr. B7 , B7M A 320 Gr. L7M , L7 A193 Gr.B8M , B8

NOTE:** Trims are available as per customer requirement.** Stellite or Hardface are optional and as per customer requirement.** "INVACO" reserve rights to change MATERIALS & DESIGN anytime without prior notice.

Page 13: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

11

Dimensions for Forged Check Valve (Model - 6300):–

Size F(mm) L(mm) Socket End Screwed End(F-NPT) But-WeldEndin mm W(mm) S(mm) F-NPT N(mm)½ 15 85 66 21.8 9.5 ½ 13.5AvailableonRequest

¾ 20 90 75 27.2 12.5 ¾ 141 25 103 84 33.9 12.5 1 17.31½ 40 128 106 48.8 12.5 1½ 18.32 50 142 142 61.2 16 2 19.3Note:- ** INVACO reserves the right to change the dimensions, materials, design & other informationanytime without prior notice.

Page 14: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

12

Quality PolicyAt “INVACO”, we established this comprehensive Quality ManagementSystem to implement a strategy of continual improvement and compliancewith the requirements of the ISO 9001:2008 Quality Assurance standard andother industrial valves standards by:Customer Focused: Make commitments we fully understand and believe we can meet anddeliver. Meet all commitments to customers on time. Satisfy our customer’s needs and exceed their expectations.Performance Driven: Verify that our products and services meet customer requirements. Monitor benchmark and continuously improve our business, products,and services, organization and employee’s performance.Entire “INVACO” stick to the spirit and intent of this policy to ensurecustomer satisfaction is achieved at all respects and times.Issue No.:- 1Next Review Date: - May 2018

(Sandesh Shamkuwar)Managing Director

Page 15: Forged Gate, Globe & Check Valve GGC.pdf · BS EN 1092 Flanges & their joints - Circular Flanges for Pipes, valves, Fittings & A ccessories. BS EN 12516 Industrial Valves Shell Design

Information:[email protected]@gmail.com+91 9619 010 130+91 9920 900 311WORK:4123, Near Khadi Machine &,Petrol Pump, K.B. Road,Ambernath (w), Mumbai.OFFICE:4 /202, Highland Residency,Thane (w), Mumbai, 400 607

Your Local INVACO Representative: