16
#1 | 2018 KRAITEC® step PROTECTIVE AND WALKWAY SLABS for terraces, balconies, flat roofs and as edge surfacing around swimming pools made from rubber granules comfortable · eye-pleasing · flexible MADE IN GERMANY

for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

#1

| 201

8

KRAITEC® step PROTECTIVE AND WALKWAY SLABS

for terraces, balconies, flat roofs and as edge surfacing around swimming poolsmade from rubber granules

comfortable · eye-pleasing · flexible

MADE IN GERMANY

Page 2: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

2

MADE IN GERMANY

KRAITEC® step FOR TERRACES AND BALCONIES

KRAITEC® stepFOR TERRACES AND BALCONIES

Balconies, terraces and gardens are recreational areas right on your property. Its eye-pleasing appearance makes rest and relaxation easy.

KRAITEC® step products are high-quality elastic surfacing slabs made from recycled rubber. They are comfortable to walk on, look great and provide outstanding surfacing on ter-races and balconies as well as on walkways around houses and in gardens.

The advantages of KRAITEC® step speak for themselves:

• Simple non-glued installation with 4 integrated connector pins

Advantage: the 30 mm thick slabs are securely bonded together, preventing displacement or buckling

• Individual slabs can be replaced at any timeAdvantage: replacing slabs is fast and easy with no mess

• Superb „Made in Germany“ quality, simple to care forAdvantage: long life (even at below-freezing temperatures),easy to clean

• Eye-pleasing colours, can be combined as desiredAdvantage: highly decorative, individualized surfacing fits in perfectly with surroundings

• SafeAdvantage: no danger of injury, can be walked on barefoot (no splintering as found on wood)

• Thermal insulation and noise deadeningAdvantage: warm and quiet floors

• Slip-resistant and quick drying (drainage channels on the bottom ensure secure removal of water)

Advantage: safety for your children

• Environment-friendly (made from recycled rubber granulate, can be recycled again after use)

Advantage: You take an active part in protecting the environ-ment and conserving natural resources

Page 3: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

3KRAITEC® step IMPACT SOUND REDUCTION

KRAITEC® step TESTED ROOF SYSTEM · INSULATION: PIR / WATERPROOFING: BITUMENEXAMPLE FOR IMPACT SOUND REDUCTION: ΔL W = 27 dB

KRAITEC® step

Connector pins

Waterproofing

Insulation PIR (140 mm)

Vapour control layer/Bitumen

Substructure

description construction

1

2

3

4

5

6

50

ΔL

40

30

20

63 125 250 500

Frequency range according to ISO 717-2

1000 2000 4000 5000

10

0

-10 f

Laboratory measurements according to ISO 10140.

Frequency (Hz) ΔL (dB)50 5,763 4,580 0,8

100 1,0125 6,1160 9,5200 13,5250 19,7315 29,2400 34,2500 37,6630 43,8800 47,5

1000 51,61250 57,71600 59,02000 62,22500 62,73150 62,84000 -5000 -

12

34

5

6

Page 4: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

4

MADE IN GERMANY

KRAITEC® stepINNOVATIVE, VERSATILE

KRAITEC® stepMade from recycled tyre granulate, the slabs are bonded with coloured binding agents and are therefore available in diffe-rent colours. The colour range of KRAITEC® step enables a wide variety of colour designs. KRAITEC® step and its variants are suitable for applications with a high risk of slipping due to their particularly anti-slip surface (tested anti-slip properties according to R10). The panels are simply laid on a flat and firm surface.

Optionally available with fleece lamination on the underside (KRAITEC® step plus).

KRAITEC® step crossKRAITEC® step cross is a further development of the proven step slab. It offers a surface structure with a tile look and is thus based on the usual floor coverings for terraces and balco-nies. However, it offers the same pleasantly soft walking fee-ling as the step slab, reduces impact noise and is extremely durable. Available in red, green, black and grey.

also available als half slab RED

Art. 06189300 Art. 06189307

GREEN

Art. 06189318

GREY

Art. 06189319

BLACK

KRAITEC® step

KRAITEC® step - INNOVATIVE, VERSATILE AND A VARIETY OF DESIGN OPTIONS

1

1CE

RTI

FIED FIRE PERFORM

ANCE

DIN EN 13501-5

Page 5: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

5

KRAITEC® step color • step neonVARIETY OF DESIGN OPTIONS

KRAITEC® step color KRAITEC® step color • step neonWith coloured EPDM upper surface.Unlike KRAITEC® step the recyced rubber slabs KRAITEC® step color und KRAITEC® step neon have an additional surface layer of approx. 10 mm of coloured virgin EPDM rubber. A wide range of colours are available for selection and combination in accordance with your ideas and wishes, allowing you to create a personalized, unique ambiance on your balcony and terrace.

KRAITEC® step neonBRIGHT GREEN

Art. 07189307

BRIGHT RED

Art. 07189308 Art. 07189309

BRIGHT YELLOW

Art. 07189310

BRIGHT BLUE

Art. 07189311

BRIGHT ORANGE

KRAITEC® step colorYELLOW

Art. 07189303

GREEN

Art. 07189302

RED

Art. 07189301 Art. 07189304

BLUE

Art. 07189305

GREY

Art. 07189306

BEIGEKRAITEC® step neon

KRAITEC® step color / neon

CER

TIFI

ED FIRE PERFORMAN

CE

DIN EN 13501-5

Page 6: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

6

MADE IN GERMANY

KRAITEC® step - ON FLAT ROOFS

KRAITEC® stepAPPLICATION ON FLAT ROOFS

R10

WATER-PERMEABLE

CER

TIFI

ED FIRE PERFORMAN

CE

DIN EN 13501-5

Flat roofs must allow access for maintenance, repair and cleaning work.

KRAITEC® step is ideally suited for walkways and as protecti-ve mat for waterproofing systems on flat roofs.KRAITEC® step can be directly installed on all types of water-proofing thus protecting the roof system from damage.Material compatibility must be clarified beforehand. For problematic material combinations we recommend KRAITEC® step plus with polyester geotextile laminate (300 g/m²) on the bottom side.Installation of KRAITEC® step is fast and simple using the connector pins supplied. The surface can be walked on immediately after installation.This dense and rugged rubber slab is also well suited for use in support pads under roof-mounted structures (antennas, air conditioning units, etc.).

KRAITEC® step satisfies the criterion „hard roofing“:

Materials used as top layers on flat roofs must resist flying sparks and radiated heat to minimize fire risks.

KRAITEC® step was tested by an independant testing institu-te and received the classification Broof(t1) according to DIN EN 13501-5 (testing based on DIN V ENV 1187). The „hard roofing“criterion is proved by a general building authority test certificate (test number: P-3692/139/11-MPA BS).

KRAITEC® step - contributes considerably to the protection of your valuable property.

Page 7: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

7KRAITEC® step TO BITUMEN

recycled rubber granulesfor comfort and safety

connector pins for easy installation

and stability

drainage channels on thelower side facilitate water drainage

KRAITEC® stepAPPLICATION TO BITUMEN

R10

WATER-PERMEABLE

RED

Art. 06189300 Art. 06189307

GREEN

Art. 06189318

GREY

Art. 06189319

BLACK

CER

TIFI

ED FIRE PERFORMAN

CE

DIN EN 13501-5

Technical Data

Material Polyurethane-bonded recycled tyre granulate

Area weight approx. 20.8 kg/m2 (approx. 5.2 kg/slab)

Thickness 30 mm (± 2.0 mm)

Dimensions 500 x 500 mm (± 1.5 %)

Surface smooth with open pores, chamfered edges

Lower side smooth with drainage channels, geotextile (PES, polyester-geotextile, 300 g/m²)

Colour red, green, grey or black

Fire resistance Efl (DIN EN 13501-1)Broof(t1) (DIN EN 13501-5)

Temperatureresistance -30° to + 80° C

Compression under traffic load

10 % at approx. 18 t/m²20 % at approx. 38 t/m² (test method based on DIN EN ISO 3386-2)

Other 4 x plastic connector pins/slab

Packaging180 slabs perone-way pallet 105 x 105 cmWeight: approx. 950 kg/pallet

Page 8: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

8

MADE IN GERMANY

KRAITEC® step roof PVCPROTECTIVE SLAB WITH PVC CLADDING

KRAITEC® step roof PVC - PROTECTIVE MAT WITH PVC CLADDING

DISPLACEMENT SPAC

E

R10

CER

TIFI

ED FIRE PERFORMAN

CE

DIN EN 13501-5

Technical Data

MaterialPolyurethane-bonded recycled tyregranulate with PVC cladding on the bottom

Area Weight approx. 21.1 kg/m² approx. 5.3 kg / slab

Thickness 30 mm (± 2.0 mm)

Dimensions 500 x 500 mm (± 1.5 %)

Surface smooth with open pores, chamfered edges

Lower side PVC cladding with drainage channel

Colours red, green, grey or black (Slight mate-rial-related colour variations possible)

Fire resistance Efl (DIN EN 13501-1)Broof(t1) (DIN EN 13501-5)

Temperatureresistance -30° to + 80° C

Compression under traffic load

10 % at approx. 18 t/m²20 % at approx. 38 t/m²(in accordance with DIN EN ISO 3386-2)

Other

Pre-drilled holes on two sides of the slab, plastic connector pins (pre-dril-led holes on four sides of the slab on request)

Packaging180 slabs perone-way pallet 105 x 105 cmWeight: approx. 954 kg/pallet

KRAITEC® step roof PVC is a protective slab made of rubber granules with PVC cladding on the bottom that is used on flat roofs with PVC foil covering as a walkway for maintenance, inspection and installation.KRAITEC® step roof PVC is also used as a protective layer under roof structures (e.g. solar installations, antennas, etc.).KRAITEC® step roof PVC features PVC cladding on the bottom as an integrated separating layer in case of incompatibility with the roofing felt. The PVC cladding enables permanent bonding to the PVC roofing felt by means of hot-air welding to prevent lifting or slipping.

Page 9: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

9

KRAITEC® step roof FPOPROTECTIVE SLAB WITH FPO CLADDING

thermal separation

FPO cladding

KRAITEC® step roof FPO - PROTECTIVE SLAB WITH FPO CLADDING

R10

CER

TIFI

ED FIRE PERFORMAN

CE

DIN EN 13501-5

KRAITEC® step roof FPO is a protective mat made of rubber granules with FPO cladding on the bottom that is used on flat roofs with FPO foil covering as a walkway for maintenance, inspection and installation.KRAITEC® step roof FPO is also used as a protective layer under roof structures (e.g. solar installations, antennas, etc.).KRAITEC® step roof FPO features FPO cladding on the bottom. The FPO cladding enables permanent bonding to the FPO roofing felt by means of hot-air welding to prevent lifting or slipping.

Technical Data

MaterialPolyurethane-bonded recycled tire granulate with FPO cladding on the bottom

Area Weight approx. 21.2 kg/m² approx. 5.3 kg / slab

Thickness 30 mm (± 2.0 mm)

Dimensions 500 x 500 mm (± 1.5 %)

Surface smooth with open pores, chamfered edges

Lower side FPO-cladding with drainage channels

Colours red, green, grey or black (slight mate-rial-related colour variations possible)

Fire resistance Efl (DIN EN 13501-1)Broof(t1) (DIN EN 13501-5)

Temperatureresistance -30° to + 80° C

Compression under traffic load

10 % at approx. 18 t/m²20 % at approx. 38 t/m²(in accordance with DIN EN ISO 3386-2)

Other

Pre-drilled holes on two sides of the slab, plastic connector pins (pre-dril-led holes on four sides of the slab on request)

Packaging180 slabs perone-way pallet 105 x 105 cmWeight: approx. 954 kg/pallet

Page 10: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

10

MADE IN GERMANY

KRAITEC® stepVERSATILE DESIGN OPTIONS

The unique surface layer of virgin EPDM rubber provides KRAITEC® step color and KRAITEC® step neon with out-standing durability and UV resistance. Excellent chlorine resistance makes them ideal for use in walkways and edge surfacing around swimming pools.

Easy cutting of KRAITEC® step slabse.g. for the insertion of any solar panels

KRAITEC® step VERSATILE DESIGN OPTIONS

Page 11: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

11

KRAITEC® stepAPPLICATION AROUND SWIMMING POOLS

Resistance to chlorine, water permeability and a highanti-slip class qualify KRAITEC® step as the ideal floorcovering for swimming pools.

class C

KRAITEC® step APPLICATION AROUND SWIMMING POOLS

CH

LORINE-RESISTANT

Cl Cl

Page 12: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

12

MADE IN GERMANY

KRAITEC® stepINSTALLATION INSTRUCTIONS

1. InstallationBefore installation ensure that the subsurface has a sufficient slope and adequate takeoff drains and check levelness of sub-surface (see installation instruction). Be sure that the subsur-face is compatible with the slabs. Start installation in a corner of the surface to be covered.Connect the slabs using the integrated connector pins moun-ted in the slabs as supplied. The pins, which allow rapid instal-lation without need for time-consuming glueing, should point in the direction of installation. Install the first row of slabs up to the edge limitation on the other side, checking to ensure pro-per alignment, perpendicularity and fit with the edge borde-ring. Installation is normally recommended in a masonry-type configuration, i.e. starting every second row with a half slab, in order to further stabilize placement.

2. CuttingThe slabs are easy to cut using a low-speed sabre saw (bla-de for wood with medium-sized teeth) or a carpet knife while using a steel straightedge as a guide. Be sure to support the slab with sufficient elevation on both sides of the cut.

3. Please noteWhen laying the slabs on plastic liners or waterproofing (e.g. on roof terraces), a separation geotextile or equivalent materi-al or KRAITEC® step plus which incorporates a laminated 300 g/m² synthetic fabric on its bottom side has to be used.Surfacing exposed to extreme temperatures will contract on cooling. This may result in gap formation at joints.

4. DisclaimerWe shall be glad to send you a detailed application-specific in-stallation instruction (terraces, balconies, flat roofs, edge sur-facing around swimming pools) for e. g. walkways or nonrec-tangular areas. You can also send your request via our website www.kraiburg-relastec.com/kraitec.

KRAITEC® step INSTALLATION INSTRUCTIONS

Page 13: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

13

KRAITEC® step RECOMMENDED CLEANING PROCEDURES

General information:Do not permit substances which can cause permanent stains - such as paints, lacquers, oils etc - to contact or mark KRAITEC® step surfaces. In this case a cleaning would be extremely difficult or even impossible.

Routine cleaning:To remove loose dust, dirt or other foreign material, use a soft-bristled broom or a heavy-duty vacuum cleaner. If the vacuumcleaner incorporates a mechanically driven brush, be sure that it is soft enough to avoid damaging the surface. To removeforeign material adhering to the surface such as dirt, moss, foods etc., srub with a soft brush and water and rinse off with large amounts of water. Should residual material remain, scrub with a soft brush, warm water and highly diluted cleaning agent and again rinse off using large amounts of water.High-pressure spray cleaners can also be used to clean KRAITEC® step. Always maintain a minimum separation of 30 cm between the spray nozzle and the surface cleaned to reduce impact pressure and also ensure that the water temperature does not exceed 80°C. Following spray cleaning, remove all material washed out of the pores by washing with highly diluted cleaning agent and again rinsing with large amounts of water.

KRAITEC® step RECOMMENDED CLEANING PROCEDURES

Page 14: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

14

MADE IN GERMANY

KRAITEC®ENVIRONMENTAL MANAGEMENT, TECHNICAL SERVICE, LOCATIONS, BROCHURES

KRAITEC® - ENVIRONMENTAL MANAGEMENT, SERVICE

Do you need general information?Whether general information, offers, pro-duct samples or printed brochures: With this form you can easily contact us:

kraiburg-relastec.com/kraitec/contact

Hamburg

Berlin

DresdenLeipzig

Magdeburg

Nuremberg

Hannover

Cologne

Frankfurt a. M.

Stuttgart

Munich

Salzwedel

Tittmoning

We turn waste rubber materials into new raw materials and products, making a valuable contribution to waste reduction and the protection of the environment.

We invest in innovative and environmentally friendly production methods and technologies.

Our products are subject to continuous quality testing and further develop-ment, whereby environment concerns are given priority. We are always on the lockout for even moren environmentally friendly alternatives that enable us to further reduce emissions and protect resources.

All employees of KRAIBURG Relastec undertake to implement sustainable practices in their daily work and to protect the environment wherever they can.

We expect the same from our suppliers and constantly monitor their performance.

Production Plant/Loading address:KRAIBURG Relastec GmbH & Co. KGFuchsberger Straße 4D-29410 Salzwedel

Sales Office & Marketing:KRAIBURG Relastec GmbH & Co. KGKehlsteinstraße 2D-84529 Tittmoning

Feel free to use our Technical Service!No matter whether by phone or on-site, our KRAITEC® technical service will give you professional advice every time during the whole planning and execution of your projects.

Fon: +49 (0) 3901 8304-63Mobile: +49 (0) 151-42 65 60 57Fax: +49 (0) 3901 [email protected]

Page 15: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

15

Notes

KRAITEC® structural protection DAMTEC® sonic KRAITEC® references

Additional KRAITEC® brochures

KRAITEC® - ADDITIONAL BROCHURES

Page 16: for terraces, balconies, flat roofs and as edge surfacing around … · 2019-05-30 · 6 MADE IN GERMANY KRAITEC® step - ON FLAT ROOFS KRAITEC® step APPLICATION ON FLAT ROOFS R10

PROTECTIVE MATS FOR STRUCTURAL PROTECTIONmade from rubber granules

KRAIBURG Relastec GmbH & Co.KGFuchsberger Straße 4 · D-29410 Salzwedel

Sales Germany:

Tel. +49 (0) 8683 701 -167Fax +49 (0) 8683 701 [email protected]

www.kraiburg-relastec.com/kraitec

All rights reserved, all indications without engagement, subject to modifications© KRAIBURG Relastec GmbH & Co. KG 2018

Sales International:

Tel. +49 (0) 8683 701 -285Fax +49 (0) 8683 701 [email protected]