19

FOEU 7BSJP - chandlersfe.co.uk · 1FSGFDUJPO JO JUT CFTU GPSN With the Fendt 700 Vario, Fendt introduces a compact high-horsepower tractor, which is virtually unmatched in practical

Embed Size (px)

Citation preview

With the Fendt 700 Vario, Fendt introduces a compact high-horsepower tractor, which is virtually unmatched in practical innovations. A maximum output of 145 to 240 hp, combined with exceptionally compact dimensions, permit a wide range of applications, from heavy-duty field operations and light row crop work, to dynamic transport work and manoeuvrable front loader operations. The undisputed highlight of the 700 Vario is the new Fendt VisioPlus cab – it redefines visibility.

714 Vario 145 hp 107 kW716 Vario 165 hp 121 kW718 Vario 180 hp 132 kW720 Vario 200 hp 147 kW722 Vario 220 hp 162 kW724 Vario 240 hp 176 kWMaximum output to ECE R24

2 3

More for the environment:

2

More profitability:

More comfort:

More versatility:

More safety:

More performance:

*In-house comparison Fendt (p. 16) / **In-house comparison Fendt (p. 12/13)

The new

Cutting-edge technology from the high-horsepower model ranges has now been integrated in the 700 Vario. As components of the Variotronic, the new Varioterminal, camera functions, automatic steering and documentation have now found their way into this power class. The new SCR technology stands for tremendous fuel economy, which makes the 700 Vario a new representative of the Fendt Efficient Technology. More at www.fendt.com/efficient-technology

g/kWh, DLG PowerMix* plus AdBlue consumption amounting

to 8.2 % of the diesel consumption

IN CLASS

When operators take their place in the cab, they immediately feel the excellence of the interior. The interior boasts impressive high-quality workmanship. As is typical for Fendt, the controls are logically placed and well thought-out and the Vario is easy to control. Here the workplace becomes a comfort zone – time to climb in, passengers, too.

6

exceptional sense of space

gigantic view

console on the right armrest

passenger seat can also be used as a table

standard, automatic climate control is optional

Open or closed?The VisioPlus cab Ergonomics as never before The Fendt highlight in comfort

Continuous front window with door on left (optional)Opening front window with doors on the left and right

The upwards angle of sight has been tripled. The downwards sight lines have also been optimised, making it is easy to see into the wheel arches.

8

operating concept adopted from the Fendt high-horsepower tractors

operated per touch and with the buttons on the operating element

display in the Varioterminal

suspension available as option

concept: cab suspension, seat suspension and front axle suspension

Dynamic seat

VarioGuide tested in the 828 Vario: Best in test in the topagrar tractor comparison “Operating Concepts” 01/2011: “Fendt has succeeded in clearly arranging a large number of functions on the armrest. The monitor sets new standards with its menu navigation.”

Fendt Variotronic operation

1,920 hand movements less per day

Flat menu hierarchy and everything in view Driving is better with full suspension

Pneumatic comfort cab suspensionThe mechanical three-point cab suspension reduces vibrations to a minimum and provides maximum ride comfort. The cab is supported at three points and has integral level control: at the front it rests on a central swing arm with air spring elements and at the rear on two air spring elements.

Key or touch control?You can easily change menu settings in the Varioterminal by either touching the screen or pushing the navigation buttons. You can navigate through the menus using either the keys or the touchscreen. The tractor controls on both terminals are identical.

EPC operating module for rear linkage with quick lift switch, depth control and PTO actuation (optional for front linkage)

Hand throttle

Control elements for auxiliary hydraulic control units 5 - 7

Cruise control buttons

Engine speed memory keys

Operating buttons for auxiliary hydraulic control units 3 and 4 and VariotronicTI automatic function

Crossgate lever for auxiliary hydraulic control units 1 and 2

10.4” Varioterminal

Pedal range

Membrane keypad for activating TMS, VariotronicTI, speed range selection, 4WD and di! erential lock engage-ment, front axle suspension, PTO speed selection and VarioGuide

one terminal for the first time

operated via Variotronic implement control

VariotronicTI with easy setting options

Fendt VarioGuide automatic steering

data transfer with VarioDoc

sharper turning angle

VarioGuide received a total score of 1.55 in the top agrar tractor test “GPS steering” 03/2011: “The system is simple, well integrated and works well.”

VariotronicTI headland managementThe new VariotronicTI headland management system allows operators to create turning manoeuvres easily, while the tractor is standing or driving, and then saves them for the specific implement. The entire operating sequence is shown along with the corresponding triggers and values, such as the time or the distance to the next step, which makes it easy for operators to understand the procedure. Individual steps in the operating sequence can be edited at a later time.

Without VarioActive1 turn of the steering wheel= 26.6°

Better quality of work with VarioGuide automatic steering

With VarioGuide, operators can concentrate fully on the implement. That increases performance and has a posi-tive impact on the overall quality of work, even in poor visibility conditions. VarioGuide guarantees maximum reliability thanks to new satellite technology.

With VarioActive1 turn of the steering wheel= 43.3°

VarioActive superimposed steering system

A stronger steering ratio can be activated with the VarioActive superimposed steering system. It adjusts to the steering movement and travel speed. A high gain in comfort, especially for front loader work in tight farmy-ards or at the headlands.

Screen layoutUp to four applications can be displayed simultaneously on the 10.4” Varioterminal. You can easily choose and change the arrangement of the applications on the screen as you wish.

Variotronic Implement Control All ISOBUS implements can be displayed clearly in full screen mode and conveniently controlled with touch technology. Up to 12 functions can be controlled at the same time.

Implement and tractor settingsIn the half-screen view, two appli-cations are displayed side by side or above each other and can be con-trolled simultaneously. For example, the settings for the implements and the engine and transmission can be optimally adjusted to each other.

Camera viewThe large 10.4” Varioterminal has up to two camera ports. This makes coupling implements much easier, for example. When working with rear-mounted implements, it is not necessary to constantly turn around. In addition to comfort, this provides greater safety, since the camera allows you to look into blind areas.

The last turning manoeuvre is as precise as the firstFinally, all functions in one terminal Work up to 1,250 hectares more with VarioGuide

10.4” VarioterminalThe 10.4” Varioterminal fulfils all operator wishes. Now, in addition to tractor operations and Variotronic implement con-trol, the external cameras, new Fendt VarioGuide automatic steering system and VarioDoc documentation system can be controlled with just one terminal.

7” VarioterminalWith a 7-inch screen diagonal, the 7” Varioterminal is a handy and functional companion for tractor operations and Variotronic implement control.

At the heart of the new 700 Vario is the new 6.06-litre six-cylinder engine and the SCR exhaust after-treatment technology. The 700 Vario now moves into a higher power segment with a

with the new continuously variable Vario HD transmission, the drive train delivers convincing dynamics and maximum efficiency.

Nm12001150110010501000

950900850800750

kW200190180170160150140130120110

1100 1300 1500 1700 1900 2100

g/kWh220210200

724

724

240 hp maximum output at 1,800 rpm

with emissions standard Stage 3b/Tier IV interim and excellent fuel efficiency

transmission 714 - 716 Vario ML140718 - 724 Vario ML180

TMS and automatic maximum output control are standard

33!kg/hp (724 Vario)

Fendt automated efficiency functions make saving easy

20,000 litres of fuel saved with SCR

Automatically drive at the limit Ideal power-weight ratio

*In-house comparison Fendt

1,058"Nm torque, 240 hp max. out-put at 1,800"rpm and a speci# c fuel consumption of 192 g/kW for the 724 Vario through implementation of the latest technology.

Reaction ofNH3 + NOx => H2O + N2

AdBlue® injection

Delivery module with # lter

AdBlue® tank

AdBlue® # ller neck

AdBlue® withdrawal and heating

Cooled metering module

SCR catalytic converter

The ingenious Fendt Vario transmissionThe Fendt Vario transmission is a hydrostatic-mechanical power split drive. With increasing speed, the share of the mechanical power transmitted through the planetary set increases. The hydrostats, which can be swung 45 degrees, and a high operating pressure of max. 550 bar ensure exceptional e$ ciency.

4WD

SCR (Selective Catalytic Reduction) for exhaust gas after-treatmentWith SCR technology, exhaust is after-treated with Adblue®, a 32.5 percent solution of urea, which converts nitrous oxides NOx into non-toxic nitrogen and water. The consumption of AdBlue®, the standard urea-water solution used by commercial vehicles, lies at an average of"seven percent of the diesel consumption. This can vary depending on the operation. AdBlue® is available at # lling stations all over the world or through AGCO Parts.

Hydro motor

Hydraulic pump

Planetary gear setTransmission

Engine torque

Range I / II

Planetary gear setRear axle

Accumulator shaft

A perfectly worked field and well-cared for

agricultural areas. The 700 Vario is an ideal all-rounder that works these areas as thoroughly and efficiently as possible. It provides the automated functions that are required for precise pass to pass operations and, thanks to its powerful hydraulics, implements can be used in a broad range of applications.

hydraulic double-acting valves

front valves

Front: 4,418 daNRear: 9,580 daN

shock load stabilising and da function

(540/540E/1000)

valves and rear PTO

Powerful hydraulic system

Powerful lift capacity at the rear

More than 22 connections at the front and rear Smart front hydraulics The right speed

A number of connections are available at the rear:

Connections in the front

(718-724 Vario)

No corresponding hydraulic linesThe hydraulic connections in the front of the 700 Vario have their own auxiliary valves and do not correspond with the rear valves. You therefore have a full # ve valves available at the rear plus two full valves in the front.

Axial piston hydraulic pump 109"l/min (opt. 152"l/min)

Multi-coupler for front loader

Front hydraulic con-nection with own auxiliary valves

Container for oil leakage

Central control block with auxiliary valves

Steering servo

Hydraulic connections at the rear (up to 5)

Hydraulic oil tank (64 litres of available oil)

Heat exchanger for hydraulic oil cooling.

Hydraulic lateral stabiliser

A push of a button for best quality of workIn the valve assignment page in the Varioterminal, operators can assign hydraulic valves to the operating elements as needed. The entire procedure is very user-friendly and is easy to operate with the buttons or touch screen.

The 700 Vario is sporty and dynamic in transport work. A!top speed of 50 km/h at a reduced engine speed enables fast, and most importantly, economical on-road driving. High payloads are no problem, thanks to the low power-weight ratio.

22 23

engine speed (1700 rpm)

suspension with locking function

for better straight-ahead driving at fast speeds on the road.

lights

two rear work lights

illumination of the wheel arches

up to 13.5 tons (depends on country)

Safe driving, even with high payloadsSix points for your comfort

Fendt Reaction steering system

Automatic steering axle lock

New front axle suspension The new front axle with suspension system permits higher payloads. The steering angle was also improved for a sharper turning angle.

Wide-angle mirror for a better overviewThe optional wide-angle mirror expands your # eld of vision, which provides signi# cantly more safety. You have a better overview of things that are happening on the sides of the tractor. The hazard zone, which is usually located in the blind spot, is easier to see into and unforeseen situations can be avoided.

Everything in view, even in the darkThe ingenious lighting concept on the 700 Vario doesn‘t leave you in the dark. Both the high and low beams provide an unmatched high level of illumination intensity. The work lights on the 700 Vario can be individually adjusted for up to 360"degrees of illumination. Xenon work lights are available as an option.

Additional areas visible with the wide-angle mirror

Areas visible without the wide-angle mirror

In addition to classic agricultural applications, specialty operations for contracting, municipal and forestry applications are increasing in the professional sector. The 700 Vario is clearly the all-rounder amongst tractors, so you are always ready to go for all operations.

26

build one perfect unit

loader

attachment lock

protected in cross bar

front loader

(optional)

maintenance points on the tractor

Optimal operating concept

*in combination with ProfiPlus

Comfortable work with the Fendt Cargo Maintenance is easy – even with the Cargo

Membrane keypad for hydraulic attachment lock and activating damping

The standard-equipped crossgate lever is a plus in operating comfort. Two control valves on the front loader can be operated precisely with just one lever. The optional CARGO comfort controls not only provide controls for a 3rd and 4th hydraulic circuit, but also the hydraulic attachment lock and the activation of the front loader damping system.

The upward angle of vision has been increased and opera-tors can see the raised front loader fully. The comfortable sitting position in the cab is good for your back and health

2)

A Digging depth (mm) 1) 130 290 250

B 1) 4150 4460 4500

C Dumping distance (mm) B = 3,5 m 1)

1540 1910 1870

C Dumping distance (mm) B = max. 1)

950 1120 1080

D Dumping angle 55° 55° 55°

Backwards tilt 48° 48° 48°

2600 2600 2950

Maximum lift capacity (daN) 3000 3000 3460

1) depends on tyres2) not with 28“ front tyres

28

20

21

28

27

22

17

23

8

9

10

1112

13

14

15

16

18

19

1

24

6

7

3

5

25

26

24

21

1. Front drive axle with 52° steering angle 2. Self-levelling hydropneumatic front axle suspension with 2 cylinders

(lockable)

3. Front linkage with external controls 4. Front PTO 5. 2 da hydraulic connections at the front 6. Planetary final drives 7. 6.06-l Deutz engine with 4 valves per cylinder 8. Cooler unit 9. SCR catalytic converter10. Continuously variable Vario transmission11. Hydro motor12. Hydraulic pump13 Enclosed 4WD clutch14. Fuel tank with 400-l capacity 15. AdBlue® tank with 38-l capacity16. Planetary axle17. Multi-disc brake for rear wheels18. Cardan brake for front wheels19. Rear linkage with hydraulic lateral stabilisation20. VisioPlus cab with integral automatic climate control and almost

6"m2 glass area

21. Pneumatic cab suspension 22. Armrest with Variocentre23. New Varioterminal with integral Fendt VarioGuide automatic steering

system and ISOBUS

24. VarioGuide roof unit25. Super comfort seat Evolution Dynamic with air suspension, climate control,

heating, pneumatic lumbar support

26. Comfort passenger seat with automatic seat belt27. External rearview mirror, electrically adjustable, heated28. External rear controls for linkage, PTO and one hydraulic control unit27. External rearview mirror, electrically adjustable, heated28. External rear controls for linkage, PTO and one hydraulic control unit

In the 700 Vario, start-of-the-art technology is optimally merged in a single vehicle, giving professional farmers and business owners an economic edge.

Standard and optional equipment Profi ProfiPlus

Vario controlsMulti-function joystickVarioterminal 7” Varioterminal 10.4” Variotronic Implement Control (ISOBUS)Variotronic TI - Headland Management SystemVario TMS - Engine-Transmission Management SystemVarioDocVarioDoc ProReady for automatic steering system 1)

VarioGuide automatic steering systemVarioActive steeringElectronic immobiliser

CabSplit front window and door on rightContinuous front windowMechanical cab suspensionPneumatic cab suspensionPneumatic comfort cab suspensionHeight and tilt-adjustable steering columnComfort seat, with air suspension and backrestSuper Comfort Seat with seat heating, lumbar supportSuper Comfort Seat Evolution Dynamic with climate con-trol, seat heating, lumbar support and seat suspensionComfort passenger seat with automatic seat beltFloor matRadio mounting kit with two stereo loudspeakersBlaupunkt Radio CD MP3TachographAir-conditioningAutomatic climate controlToxic filter (aerosol)Segment wipers frontParallel wipers frontRear window heatedRear window wash/wipe systemExt. rearview mirror mechanically adjustableExt. rearview mirror, electrically adjustable, heatedWide-angle mirrorInterior mirrorWork lights, 4 roof rear, 2 roof frontWork lights A-pillar, roof front, rear mudguardsWork light Xenon A-pillar, roof front, rear mudguards

Ambient lightingBracket for additional deviceCooled boxBattery disconnect switch

EngineFuel prefilterFuel prefilter (heated)Preheater package (engine, transmission, hydraulic oil)Exhaust brake

TransmissionShuttle function, Stop & Go functionAcoustic signal when reversing

Chassis / safety featuresCompressed air systemAutomatic trailer steering axle lockCompressed air Duomatic coupling

Standard and optional equipment Profi ProfiPlus

4WD / differential locksComfort engagement 4WD / differential lockRear / front differential with 100% disc locking

Power shift PTORear: Flange PTO 540/540E/1000 rpmFront: 540 or 1000 rpmExternal actuation rear PTO

Hydraulic system

152 l/min delivery capacityElectrohydraulic rear lift SA (EPC)Electrohydraulic rear lift DA (EPC), with external actuationHydraulic lower link lateral stabilisationRadar sensorHydraulic rear top link Hydraulic connection external (load-sensing)Hydraulic valve actuation crossgate lever, Connect-under-pressure couplings rearDouble connect-under-pressure lever couplings rearComfort ballast mounting w/o front liftFront lift DA, with external actuationComfort front lift da, with position control, external actuationComfort front lift da, with position control and relief control, external actuation

BodyAuto. hitch with remote control, rearBall-type coupling, height adjustableBall-type coupling normal in the low hitchBall-type coupling long in the low hitchForced steering (one or two-sided)Hitch couplingSwinging drawbarPiton fixRotating beacon left and rightWide vehicle markersPivoting front mudguardsFront weights, various sizesBallast weights for rear wheels

Front loaderFront loader mounting partsFront loader Cargo 4X85Front loader Cargo 5X/85Front loader Cargo 5X/90

1) = including VarioGuide roof hatchThe Fendt on-line configurator: put together your own custom Fendt according to your wishes. Visit www.fendt.com.

Standard and optional equipment | = standard | = optional | = not available

Fendt 714 716 718 720 722 724

EngineRated power (kW/hp) (ECE R24) 94 / 128 108 / 148 121 / 165 136 / 185 151 / 205 162 / 220Max. power (kW/hp) (ECE R24) 107 / 145 121 / 165 132 / 180 147 / 200 162 / 220 176 / 240Rated power (kW/hp) (EC 97/68) 4) 106 / 144 120 / 163 133 / 181 148 / 201 163 / 222 174 / 237Max. power (kW/hp) (EC 97/68) 110 / 150 125 / 170 139 / 188 153 / 208 168 / 229 181 / 246No. of cylinders / cooling 6/water 6/water 6/water 6/water 6/water 6/waterCylinder bore / stroke (mm) 101 / 126 101 / 126 101 / 126 101 / 126 101 / 126 101 / 126Cubic capacity (cm3) 6056 6056 6056 6056 6056 6056Rated engine speed (rpm) 2100 2100 2100 2100 2100 2100Engine speed at max. power (rpm) 1800 1800 1800 1800 1800 1800Max. torque (1450/rpm) 650 725 804 897 988 1058Torque rise (%) 43 40 39 39 39 38Optim. fuel consumption (g/kWh) 192 192 192 192 192 192Fuel tank (l) 400 400 400 400 400 400AdBlue® (l) 38 38 38 38 38 38Oil change interval (op. hrs.) 500 500 500 500 500 500

Transmission and PTOTypeSpeed range: Range I - field (forward / reverse) Range II - road (forward / reverse)

0.02 to 28 km/h / 0.02 to 17 km/h0.02 to 50 km/h / 0.02 to 33 km/h

Maximum speed (km/h) 50 50 50 50 50 50Rear PTO (rpm) 540/540E/1000Front PTO (rpm) 1) 540 or 1000

Power liftDisplacement pump pressure (200 bar) (l/min) (option)

109 (152)

109 (152)

109 (152)

109 (152)

109 (152)

109 (152)

Rear lift control EPC EPC EPC EPC EPC EPCAdditional valves max. (standard) 6 da 3) (3 da 3)) (714-716) or 7 da 3) (3 da 3)) (718-724)

electr. valves / crossgate leverMax. lift capacity, rear linkage on the draw-bar (kN/kp)

9580 9580 9580 9580 9580 9580

Max. lift capacity, front linkage (daN) 4418 4418 4418 4418 4418 4418Implement weight / front linkage up to (kg) 3180 3180 3180 3180 3180 3180

Weights and dimensionsUnladen weight 7600 7600 7900 7900 7900 7900Perm. overall weight (kg) 12500 12500 13500 13500 13500 13500Max. vertical hitch load with standard tyres and 50 km/h (kg)

2000 2000 2000 2000 2000 2000

Overall length (mm) 5227 5227 5227 5227 5240 5240Overall width (mm) 2550 2550 2550 2550 2550 2550Overall height (mm) 3050 3050 3050 3050 3050 3050Ground clearance (mm) 2) 552 552 552 552 552 552Wheelbase (mm) 2770 2770 2770 2770 2783 2783Track width front (mm) 2) 1940 1940 1940 1940 1950 1950Track width rear (mm) 2) 1920 1920 1920 1920 1920 1920Min. turning circle (m) 5,56) 5,56) 5,56) 5,56) 5,55) 5,55)

Electrical equipmentStarter (kW) 4.0 4.0 4.0 4.0 4.0 4.0Battery (V/Ah) 12 / 180 12 / 180 12 / 180 12 / 180 12 / 180 12 / 180Alternator (V/A) 14 / 200 14 / 200 14 / 200 14 / 200 14 / 200 14 / 200

tyresstandard tyres front standard tyres rear

480/70 R28 580/70 R38

540/65 R28 650/65 R38

540/65 R28 650/65 R38

540/65 R30 650/65 R42

540/65 R30 650/65 R42

540/65 R30 650/65 R42

optional front optional rear

540/65 R30 580/70 R42

540/65 R30 580/70 R42

540/65 R30 650/65 R42

600/65 R28 710/70 R38

600/65 R28 710/70 R38

600/65 R28 710/70 R38

optional front optional rear

600/60 R28 580/70 R42

600/60 R28 580/70 R42

600/65 R28 710/70 R38

600/65 R28 650/75 R38

600/65 R28 650/75 R38

600/65 R28 650/75 R38

optional front optional rear

600/60 R30 710/60 R42

600/60 R30 710/60 R42

600/60 R30 710/60 R42

600/60 R30 710/60 R42

optional front optional rear

320/85 R38* 320/90 R54*

320/85 R38* 320/90 R54*

320/85 R38* 320/90 R54*

1) = optional, 2) = with standard tyres, 3) = can also be operated as single-acting, 4) = power specifications for registration, 5) = w/o steering clutch brake, with 540/65R30, 6) = w/o steering clutch brake, with 480/70R28* = Recommended for rowcrop tires, not delivered by FendtYour Fendt dealer will be pleased to inform you about further tyre options.

32 33

Fendt overall profitability

effectiveness per hectare

unbeatable resale value

consultation and full reliability

Efficiency: The recipe for economical operationsWe make no compromises when it comes to efficiency, because our objective is to be the leader for cost-effectiveness per hectare and kilometre. The very best technology, for example as is found in the 700 Vario, is just good enough for us: the highly efficient Vario drive train and the fuel-saving SCR technology in combination with TMS. These enhance the already top-level efficiency of the Vario and further reduce the costs per hectare and kilometre.

Retention of value = future-proofing plus qualityEvery Fendt customer knows: things are settled at the end of the service life of a tractor. And this is a true joy for Fendt owners, because the resale value of a Fendt Vario is unbeatable. As a trendsetter, Fendt continually provides vital standards to the sector and implements technology that continues to be in demand in the future. Add to that the high quality, which stands for operati-onal reliability and a long lifetime. The total is a retention of value that only Fendt can offer you.

More freedom for investments – tailor-made financing through AGCO FINANCE and the custom service package

A custom financing package with attractive conditions and flexible terms offers you an ideal opportunity to match your investment to the needs of your farm or business. With a Fendt Service Package, you always have servicing and repair costs under control. When purchasing your tractor, for example, you can already plan the prescribed service work based on attractive fixed prices – with the Service Package or the comprehensive ProService Package.

It is clear that you get cutting-edge technology

to the total cost picture of a Fendt Vario: from competent consultation, to!comprehensive services to the special value retention of!a Fendt!tractor.

AGCO GmbH – Fendt-Marketing87616 Marktoberdorf, GermanyFax +49 (0) 8342 / 77-220

Fendt is a world wide Brand of AGCO. All data regarding delivery, appearance, performance, dimensions and weight, fuel consumption and running costs of the vehicles correspond with the latest information availa-ble at the time of going to press. Changes may be made befo-re the time of purchase. Your Fendt dealer will be pleased to supply you with up-to-date information.

724V/1.0-EN/09-12/8.0-E