Flowserve, Pleuger Submersible

8/21/2019 Flowserve, Pleuger Submersible

http://slidepdf.com/reader/full/flowserve-pleuger-submersible 1/8

Pump Division

SUBM SubmersibleMotors - Pumps

Byron Jackson ® Oil FilledDesign

Pleuger ® Water FilledDesign

Bulletin PS-50-3f (E)



Pump SupplierTo The World

Flowserve is the

driving force in the

global industrial

pump marketplace.

No other pump

company in the

world has the

depth or breadth

of expertise in

the successful

application of

pre-engineered,

engineered and

special purpose

pumps and

systems.

Pumping SolutionsFlowserve is providing pumpingsolutions which permit custom-ers to continuously improveproductivity, profitability and

pumping system reliability.

Market FocusedCustomer SupportProduct and industry specialistsdevelop effective proposals andsolutions directed toward marketand customer preferences.They offer technical advice andassistance throughout eachstage of the product life cycle,beginning with the inquiry.

Dynamic TechnologiesFlowserve is without peer in thedevelopment and application ofpump technology, including:• Hydraulic engineering

• Mechanical design• Materials science• Intelligent pumping• Manufacturing technology

Broad Product LinesFlowserve offers a wide rangeof complementary pump types,from pre-engineered processpumps, to highly engineeredand special purpose pumpsand systems. Pumps are builtto recognized global standardsand customer specifications.

Pump designs include:• Single stage process• Between bearing

single stage• Between bearing

multistage• Vertical• Submersible motor• Rotary• Reciprocating• Nuclear• Specialty

Pump Division



Pump Division

3

ComplementaryPump DesignsDepending upon applicationrequirements, Flowservecan also provide these

vertical design pumps:• Vertical turbine• Mixed-axial flow• Double suction

A Choice of DesignFlowserve is unique as the onlycompany capable of offeringits customers a choice ofeither oil filled or water filled

submersible motors completewith proprietary pump ends.This enables customers toselect the design that bestmeets their needs in terms of:• Application• Preference and specifications• Initial purchase cost versus

total life cycle costs

Both designs have been provenwith more than 150 years ofcombined, successful applicationexperience. Flowserve submersible motor pumps offer

these important advantages:• Single source motor and

pump with unit responsibilityfor quality, engineering,service and warranty

• Broadest range of submersible-deep well pumps and motorsin the world

• Largest range of motor horse-power per caisson size

• Choice of cooling - lubricationsystems

• Extensive seal options includingzero-leakage, zero-wear design• High efficiency and maximum

flow rate per well size• Robust design for long

service life• Re-windable motors for lower

maintenance costs• Special designs and materials

for offshore, geothermal andother demanding applications

Worldwide Repair

Factory authorized servicecenters are located in NorthAmerica, Europe and the MiddleEast. Submersible MotorExchange Program is availablefor most standard motor sizes.

Submersible Advantages• Reliable• Explosion proof• Cost effective• Silent• Out of sight

• Vandal proof• Crooked well compatible• Safe from flooding and freezing• Ideal for deep settings

SUBMSubmersible

Motors - Pumps

Byron JacksonOil Filled

Design

PleugerWater Filled

Design

VTP



PleugerWater Filled Design

Pleuger submersible motorsoffer an extraordinary range ofperformance.

The water filled and wet wound

motors are environmentallyfriendly, provide high efficiencyand offer great reliability.Superior thrust bearing design,a 100% pressure compensationsystem, re-windable stators anda choice of materials for bothstrength and dielectric charac-teristics are several featuresmaking Pleuger submersiblemotors an exceptional value.

Services• Municipal• Industrial• Process• Offshore• Mining• Irrigation• Power

Typical Applications• Potable water• Sea water – Fire protection

– Ballast• Dewatering• Pressure boosting – High rise buildings – Fountains• Subsea drives• Pipelines

Operating Parameters• Flows to 4500 m3 /h

(19 800 gpm)• Heads to 800 m (2600 ft)• Motor sizes to 5000 kW

(6700 hp) – Speeds from 200 to

3600 rpm – 2, 4 and 6 pole designs (other designs available) – 200 to 6600 volt – 50 & 60 Hz frequency – Variable frequency drive

and high temperaturemotor options

4

Standard Design FeaturesMotors• Pressure balanced

mechanical seal availablein many materials to best

suit application• Large, double journal

bearings water lubricatedand maintenance free forextended service life

• Wet type motors withwater tight insulatedwindings for easyservice

• Prefilled motors withfood grade additivesfor freeze and rustprotection

• Heavy duty, adjustable,self-aligning thrustbearings for extendedmotor life

• NEMA connections foruniversal fit

• Non-toxic Class Y winding insulation forpotable water services

• Friction welded shafts formaximum shaft strengthand highest efficiency

• Motors with CSA, EMV,KTV, CE, VDE and otherauthority certifications

Pumps• Heavy-duty and high-

efficiency impellers andbowl cases

• Wide variety of bearing,impeller and bowl casingmaterials to suit anyapplication

• Dynamically balanced

impellers to minimizevibration and maximizeservice life

• Compact adaption system between pumpand motor for maximumshaft support

Cables• Power cable internally

connected to eliminatepotential leaks

Pump Division



Pump Division

Byron Jackson Oil Filled

Design

5

Byron Jackson oil filledsubmersible units are built forthe most demanding deep wellservices. Rugged, reliable andlong lasting, these units offer

significant total life cyclecost savings.

Services• Municipal• Industrial• Process• Offshore• Mining• Irrigation• Power

Typical Applications• Potable water• Storage cavern• Sea water – Fire protection – Ballast• Dewatering• Pressure boosting – Fountains• Geothermal• Water injection system• Pipelines

Operating Parameters• Flows to 4500 m3 /h(19 800 gpm)

• Heads to 800 m (2600 ft)• Motor sizes to 1500 kW

(2000 hp) – Speeds from 1000 to

3600 rpm – 2, 4 and 6 pole designs (other designs available) – 200 to 6600 volt – 50 & 60 Hz frequencies – Variable frequency drive

and high temperaturemotor options

Accredited for waterhandling services• NSF Standard 61 Certification

according to criteria establishedjointly by the U.S. ASME andNSF International

• Certification programaccredited by RvA, the DutchCouncil for Accreditation

Standard Design FeaturesMotors• Oil filled with internal

self contained force feed,filtered, cooled oil circu-

lation system to maintaincontinuous lubrication

• Vacuum pressure impreg-nated (VPI) epoxy, ClassF insulation system forsuperior insulation andlong service life

• Double-acting thrustbearing system forcontinuous up or downthrust capability

• Special metallurgy avail-able for corrosive services

• Suitable for use withvariable frequency drivesfor improved pumpingefficiency

• Models available for hightemperature (≥ 90°C[200°F]) and high suctionpressure services

Pumps• Heavy-duty and high-

efficiency impellers and

bowl cases• Wide variety of materialsavailable to suit anyapplication

• Dynamically balancedimpellers to minimizevibration and maximizeservice life

• Dual bearings betweenpump and motor formaximum shaft support

• Highly efficient suctioninlet design

Cables• Sealed power cable

plug-in feature forreliability and ease ofinstallation; no need forfield splicing

Single, pressurizedmechanical seal For hydrocarbon servicesand non-verticalapplications

Double mechanical seal A high quality alternativeto the mercury seal

Mercury seal Zero leakage, zero wearfor absolute reliability

Seal Options



Options andTechnical Data

4000

3000

2000

1000

500

250

100

50

10

0

1500

1000

750

500

300

200

150

100

50

10

0

0 10 25 50 100 250 500 1000 2000 3500 5000

1000

750

500

300

200

100

50

25

10

0

3000

2000

1500

1000

500

250

100

50

10

0

0 25 50 100 250 500 1000 2500 5000 10 000 15 000 25 000

0 10 25 50 100 250 500 1000 2000 4000 6000

0 25 50 100 250 500 1000 2500 5000 10 000 15 000 20 000

SUBM Range Chart

Pump Impellers• Low NPSHR for hydrocarbons

and low submergence• Non-metallic for enhanced

performance and corrosion

resistance• Multiple specific speeds for

optimum selection

Pump Materials• Cast iron• Bronze• Stainless steel• Duplex and super duplex

stainless steel• Reinforced composite (Noryl®)

Accessories• Power cable assemblies• Surface plates• Junction boxes• Suction sleeves

• Booster barrels• Starters and control panels• Monitoring instrumentation• Lightning arresters• Check valves

Bottom Intake• Reduced civil cost

(sump design)• Minimum submergence

design• Modular design• Tank installation• Open sump installation

® Noryl is a registered trademark of General Electric Company Corporation.

Bottom suction multistage

Flow Rate - 60 Hz

T D H

- 5 0

H z

ft m

m3 /hgpm

T D H

-

6 0

H z

Flow Rate - 50 Hz

Pump Division

ft m

m3 /hgpm



Pump DivisionPump Division

GlobalEngineered Services

and Support

Total Cost Reduction

Asset Management

Product Life Cycle

Performance Re-rates

Site Diagnostics

Repair Services

Energy Management

Spare Parts

Maintenance Contracts

Materials Upgrades

Turnkey Services

Field Repairs

Installation

Project Supervision

Commissioning

Equipment Upgrades

Condition Monitoring

Systems Analysis

Field Machining

Service DedicationFlowserve Engineered Services is focused on providing customerswith uncompromising service and support, where and when needed.

Dedicated to delivering the high-est quality support, EngineeredServices integrates its extensivepump and materials engineeringknowledge with creative servicesolutions. Engineered Services fully understands the businesschallenges facing customers andis prepared to manage solutionsto succeed as a team.

A worldwide network of serviceand repair centers staffed byhighly skilled engineers andtechnicians is available aroundthe clock, seven days a week torespond to customer queries,to evaluate and troubleshootproblems and to providereliable solutions.

Strength of Experience,Commitment to ExcellenceFlowserve has long servedindustries requiring superiorequipment performance and

service life.• Oil and gas production• Hydrocarbon processing• Chemical processing• Water resources• Power generation• Nuclear• Mining and mineral processing• Pulp and paper• General industry

Engineered Services is dedicatedto maximizing equipmentperformance and providingreliability-centered maintenanceprograms for pumps and relatedequipment, regardless of manu-facturer. Using the FlowStar™asset management software,Engineered Services tracksperformance and supportsimprovement programs using aservice life cycle cost businessapproach. The results areimproved reliability and

increased profitability.

Business PartnerFlowserve partners withcustomers to respond tothe dynamic businessconditions that affect

them. Flowserve will work with customers to driveefficiency, maximizethroughput and controlprocess quality. Whetheruser needs involve on-site technical assistanceor broader project planning with full turnkeyresponsibility, FlowserveEngineered Services willdeliver professional,reliable results.

7

Pump Division



To find your local Flowserve representativeplease use the Sales Support Locator System

found at www.flowserve.com

Or call toll free: 1 800 728 PUMP (7867)

Your local Flowserve representative:

Pump Division

USA and Canada Flowserve Corporation5215 North O’Connor Blvd. Suite 2300Irving, Texas 75039-5421 USATelephone: 1 937 890 5839

Europe, Middle East, Africa Flowserve CorporationGebouw HagepointWestbroek 39-514822 ZX BredaNetherlandsTelephone: 31 76 502 8920

Latin America Flowserve CorporationBoulevard del CafetalEdificio Ninina, Local 7El Cafetal - CaracasVenezuela 1061Telephone: 58 212 985 3092Telefax: 58 212 985 1007

Asia Pacific Flowserve Pte. Ltd.200 Pandan Loop #06-03/04Pantech 21Singapore 128388Telephone: 65 6771 0600Telefax: 65 6779 4607

Flowserve... Supporting Our Customers

With The World’s Leading

Pump Brands

Printed in U.S.A.June 2009

© Flowserve Corporation

Jeumont-Schneider™Jeumont-Schneider™

Documents

Flowserve, Pleuger Submersible