FireFree® ScandiBoard

Fire Protection of Steel Constructions

www.scandisupply.com

FireFree® ScandiBoards Light weight Passive Fire Protection

of Steel Constructions

Tested and classified according to the European standard EN 13381-4:2009

Earlier tested according DIN 4102-2, BS 476-21 and DS 1057.1

Material Class A1

New possibilities in easy fire resistance FireFree

® ScandiBoard is the fastest product to install in the marked. The product is classified

according to the new European standards. The board material is FireFree®

ScandiBoard and is made

of Calcium Silicate.

Fast working procedure The solution requires only one board, which ensures a fast working procedure and smooth

installation. FireFree® ScandiBoard is easy to install.

Types, dimensions and weight

Type Weight Thickness Width Length 1 Length 2 Length 3

FireFree® ScandiBoard 5,5 kg/m

2 22 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 6,3 kg/m

2 25 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 7,5 kg/m

2 30 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 8,8 kg/m

2 35 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 10,0 kg/m

2 40 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 11,3 kg/m

2 45 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 12,5 kg/m

2 50 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 13,8 kg/m

2 55 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

FireFree® ScandiBoard 15,0 kg/m

2 60 mm 1.220 mm 1.000 mm 2.040 mm 2.440 mm

Facts Easy and quick assembly

Lightweight solution

High product stability

Environmentally correct material – quartz free

No growing conditions for mold and fungus

Benefits

Strong and durable material

Easy to handle – and to install

Excellent screw holding capacity

Low weight of the final construction

Few screws, stables or shot nails

General FireFree

® ScandiBoards can

be machined with ordinary

tools for woodworking. It is

not necessary to take any

special measures.

Safety

FireFree® ScandiBoard does

not contain inorganic fibers

or quartz. By machining the

machines should be connect-

ed to the dust extraction

equipment to reduce the

amount of dust.

Tools

FireFree® ScandiBoards can

be cut with a circular saw or

jigsaw. Edges can be sanded

or rasped and the plates are

assembled with screws, sta-

ples or shot nails. See the

Table.

Surface Requirements

If the FireFree® Scandi-

Boards must be visible, it is

possible to mount side rails

according to the steel suppli-

er's instructions. See also our

suggestions for surface

treatment.

Transport / storage

FireFree® ScandiBoards will

be delivered on pallets. Place

the pallets on a smooth and

dry spot and protect them

against the weather.

Be careful when transporting

individual sheets, to avoid

damaging the edges. Do not

put plates vertical on the

edges, as it may damage the

corners.

Cutting

FireFree® ScandiBoards are to

be cut with an excess of 1-2

mm. For the beams are to be

made plugs for mounting be-

tween flanges. Plugs are also

carried out with an excess of

1-2 mm.

Fixing

FireFree® ScandiBoards can

be assembled with screws,

staples or shot nails according

to the Table.

It is not necessary to apply

glue under the assumption that

all connections are tight. If

not, you must apply Nullifire

B722 fire mastic in the joints

(maximum width 4 mm) be-

fore the plates are mounted, so

the joint is tight.

Installation of FireFree® ScandiBoards

Board thickness Screws Staples Shot nails

mm Distance Size Distance Size Distance Size

22 340 mm 4,0 x 50 340 mm 63 mm Na Na

25 340 mm 4,0 x 50 340 mm 63 mm 460 mm 37 mm

30 340 mm 4,0 x 60 340 mm 63 mm 460 mm 42 mm

35 340 mm 4,0 x 70 340 mm 63 mm 460 mm 47 mm

40 340 mm 5,0 x 80 Na Na 460 mm 52 mm

45 340 mm 5,0 x 90 Na Na 460 mm 57 mm

50 340 mm 5,0 x 100 Na Na 460 mm 62 mm

55 340 mm 5,0 x 100 Na Na Na Na

60 340 mm 5,0 x 120 Na Na Na Na

Fixing methodes

Installation of FireFree® ScandiBoards for

Passive Fire Protection of load bearing steel constructions

- when using screws or stables

Installation of FireFree® ScandiBoards for

Passive Fire Protection of load bearing steel constructions

of HSQ and closed profiles - when using shot nails

Profil Am/V -41

Am/V -32 Profil Am/V -4

1Am/V -3

2 Profil Am/V -41

Am/V -32

HE 100A 185 138 HE 100B 154 115 HE 100M 85 65

HE 120A 184 137 HE 120B 141 106 HE 120M 80 61

HE 140A 174 129 HE 140B 130 98 HE 140M 76 58

HE 160A 161 120 HE 160B 118 89 HE 160M 71 54

HE 180A 155 115 HE 180B 110 83 HE 180M 68 52

HE 200A 145 108 HE 200B 103 77 HE 200M 65 49

HE 220A 134 100 HE 220B 97 73 HE 220M 62 47

HE 240A 122 91 HE 240B 91 68 HE 240M 52 40

HE 260A 118 88 HE 260B 88 66 HE 260M 51 39

HE 280A 113 84 HE 280B 85 64 HE 280M 50 38

HE 300A 105 78 HE 300B 81 60 HE 300M 43 33

HE 320A 98 74 HE 320B 77 58 HE 320M 43 33

HE 340A 94 72 HE 340B 75 57 HE 340M 43 33

HE 360A 91 70 HE 360B 73 57

HE 400A 87 68 HE 400B 71 56

HE 450A 83 66 HE 450B 69 55

HE 500A 80 65 HE 500B 67 55

HE 550A 79 65 HE 550B 67 55

HE 600A 79 65 HE 600B 67 55

HE 650A 79 65 HE 650B 66 55

Profil Am/V -41

Am/V -32 Profil Am/V -4

1Am/V -3

2 Profil Am/V -41

Am/V -32

IPE 80 330 270 UPE 80 230 185 UNP 80 227 186

IPE 100 300 247 UPE 100 223 183 UNP 100 222 185

IPE 120 279 230 UPE 120 214 178 UNP 120 206 174

IPE 140 259 215 UPE 140 205 173 UNP 140 196 167

IPE 160 241 200 UPE 160 194 165 UNP 160 188 160

IPE 180 226 188 UPE 180 185 158 UNP 180 179 154

IPE 200 211 176 UPE 200 177 152 UNP220 147 127

IPE 220 198 165 UPE 220 166 143

IPE 240 184 153 UPE 240 156 135

IPE 270 176 147 UPE 270 148 129

IPE 300 167 139 UPE 300 142 124

IPE 330 156 131 UPE 330 129 113

IPE 360 146 122 UPE 360 121 107

IPE 400 137 116 UPE 400 112 100

IPE 450 130 110

IPE 500 121 104

IPE 550 113 98

IPE 600 105 91

1 A m /V -4: 4-sided fire protection

2 A m /V -3: 3-sided fire protection

Section factors Am/V m-1

when using screws or stables

HEB HEM

IPE UNPUPE

HEA

R 30

Am/V m-1

350-650ºC 350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC

40 22 22 22 22 22 22 22 22

45 22 22 22 22 22 22 22 22

50 22 22 22 22 22 22 22 22

55 22 22 22 22 22 22 22 22

60 22 22 22 22 22 22 22 22

65 22 22 22 22 22 22 22 22

70 22 22 22 22 22 22 22 22

75 22 22 22 22 22 22 22 22

80 22 22 22 22 22 22 22 22

85 22 22 22 22 22 22 22 22

90 22 22 22 22 22 22 22 22

95 22 22 22 22 22 22 22 22

100 22 22 22 22 22 22 22 22

105 22 22 22 22 22 22 22 22

110 22 22 22 22 22 22 22 22

115 22 22 22 22 22 22 22 22

120 22 22 22 22 22 22 22 22

125 22 25 22 22 22 22 22 22

130 22 25 22 22 22 22 22 22

135 22 25 22 22 22 22 22 22

140 22 30 22 22 22 22 22 22

145 22 30 25 22 22 22 22 22

150 22 30 25 22 22 22 22 22

155 22 30 25 22 22 22 22 22

160 22 30 25 22 22 22 22 22

165 22 30 30 25 22 22 22 22

170 22 35 30 25 22 22 22 22

175 22 35 30 25 22 22 22 22

180 22 35 30 25 22 22 22 22

185 22 35 30 25 22 22 22 22

190 22 35 30 30 25 22 22 22

195 22 35 30 30 25 22 22 22

200 22 40 35 30 25 22 22 22

205 22 40 35 30 25 22 22 22

210 22 40 35 30 25 22 22 22

215 22 40 35 30 30 25 22 22

220 22 40 35 30 30 25 22 22

225 22 45 35 35 30 25 22 22

230 22 45 40 35 30 25 22 22

235 22 45 40 35 30 25 22 22

240 22 45 40 35 30 30 25 22

245 22 45 40 35 30 30 25 22

250 22 45 40 35 30 30 25 22

255 22 50 40 35 35 30 25 22

260 22 50 40 35 35 30 25 22

265 22 50 45 40 35 30 25 25

270 22 50 45 40 35 30 30 25

275 22 50 45 40 35 30 30 25

280 22 55 45 40 35 30 30 25

285 22 55 45 40 35 30 30 25

290 22 55 45 40 35 35 30 25

300 22 55 50 45 40 35 30 25

NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest 11.11.30

Design temperature

R 60

FireFree® ScandiBoard thickness for Passive Fire Protection

of steel - when using screws and stables

Am/V m-1

350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC

40 22 22 22 22 22 22 22

45 22 22 22 22 22 22 22

50 22 22 22 22 22 22 22

55 22 22 22 22 22 22 22

60 22 22 22 22 22 22 22

65 22 22 22 22 22 22 22

70 22 22 22 22 22 22 22

75 25 22 22 22 22 22 22

80 25 22 22 22 22 22 22

85 30 25 22 22 22 22 22

90 30 25 22 22 22 22 22

95 30 30 25 22 22 22 22

100 35 30 25 22 22 22 22

105 35 30 25 22 22 22 22

110 35 30 30 25 22 22 22

115 40 35 30 25 22 22 22

120 40 35 30 30 25 22 22

125 40 35 30 30 25 22 22

130 45 40 35 30 25 22 22

135 45 40 35 30 30 25 22

140 45 40 35 30 30 25 22

145 50 40 35 35 30 25 22

150 50 45 40 35 30 30 25

155 50 45 40 35 30 30 25

160 55 45 40 35 30 30 25

165 55 45 40 35 35 30 25

170 55 50 45 40 35 30 30

175 60 50 45 40 35 30 30

180 60 50 45 40 35 35 30

185 60 55 45 40 35 35 30

190 55 50 45 40 35 30

195 55 50 45 40 35 30

200 55 50 45 40 35 35

205 60 50 45 40 35 35

210 60 55 45 40 40 35

215 60 55 50 45 40 35

220 55 50 45 40 35

225 55 50 45 40 35

230 55 50 45 40 35

235 60 50 45 40 40

240 60 55 50 45 40

245 60 55 50 45 40

250 60 55 50 45 40

255 55 50 45 40

260 55 50 45 40

265 60 50 45 45

270 60 55 50 45

275 60 55 50 45

280 60 55 50 45

285 55 50 45

290 55 50 45

295 60 50 45

300 60 55 50

NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest 11.11.30

Design temperature

R 90

FireFree® ScandiBoard thickness for Passive Fire

Protection of steel - when using screws and stables

Am/V m-1

350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC

40 22 22 22 22 22 22 22

45 22 22 22 22 22 22 22

50 25 22 22 22 22 22 22

55 30 22 22 22 22 22 22

60 30 25 22 22 22 22 22

65 35 30 25 22 22 22 22

70 35 30 25 22 22 22 22

75 40 35 30 25 22 22 22

80 40 35 30 25 25 22 22

85 40 35 30 30 25 22 22

90 45 40 35 30 30 25 22

95 45 40 35 30 30 25 22

100 50 45 40 35 30 30 25

105 50 45 40 35 30 30 25

110 55 45 40 35 35 30 25

115 55 50 45 40 35 30 30

120 60 50 45 40 35 35 30

125 60 55 45 40 40 35 30

130 55 50 45 40 35 30

135 55 50 45 40 35 35

140 60 50 45 40 40 35

145 60 55 50 45 40 35

150 55 50 45 40 35

155 60 50 45 40 40

160 60 55 50 45 40

165 60 55 50 45 40

170 55 50 45 40

175 60 50 45 40

180 60 55 50 45

185 60 55 50 45

190 55 50 45

195 60 50 45

200 60 55 50

205 60 55 50

210 60 55 50

215 55 50

220 60 55

225 60 55

230 60 55

235 60 55

240 55

245 60

250 60

255 60

260 60

265

270

275

280

285

290

NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest 11.11.30

FireFree® ScandiBoard thickness for Passive Fire

Protection of steel - when using screws and stables

Design temperature

R 120

Am/V m-1

350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC

40 35 30 25 22 22 22 22

45 40 35 30 25 22 22 22

50 45 35 35 30 25 22 22

55 45 40 35 35 30 25 22

60 50 45 40 35 30 30 25

65 55 50 45 40 35 30 30

70 60 50 45 40 35 35 30

75 55 50 45 40 35 30

80 60 50 45 40 40 35

85 55 50 45 40 35

90 60 50 45 40 40

95 60 55 50 45 40

100 60 50 45 45

105 60 55 50 45

110 55 50 45

115 60 55 50

120 60 55 50

125 60 55

130 60 55

135 55

140 60

145 60

150

155

160

165

170

175

180

185

190

195

200

205

210

215

220

225

230

235

240

245

250

255

260

265

270

275

280

285

290

NOTE: If the A m /V is placed between two different board thicknesses, please take the thickest 11.11.30

FireFree® ScandiBoard thickness for Passive Fire

Protection of steel - when using screws and stables

R 180

Design temperature

Thickness Am/V m-1

Thickness Am/V m-1

Diameter Thickness Am/V m-1

3,2 312 5 400 60,3 2,9 461

3,6 277 6 333 60,3 4,5 305

4 250 7 285 76,1 2,9 456

4,5 222 8 250 76,1 4,5 301

4,85 206 9 222 88,9 3,2 413

5 200 10 200 88,9 4,85 278

5,4 185 11 182 114,3 3,6 365

6 166 12 166 114,3 5,4 277

6,3 158 13 153 139,7 4 327

7 142 14 143 139,7 5,4 245

8 125 15 133 168,3 4,5 289

8,87 113 16 125 165,1 5,4 243

9 111 17 118 219,1 6,3 208

10 100 18 111 273 6,3 207

11 90 19 105 323,9 7,1 183

12 83 20 100 355,6 8 163

12,5 80 22 91 406,4 8,8 148

16 63 25 80 457 10 130

20 50 30 67 508 11 118

* Round profiles shall be proteced as a square 11.11.30

RHS/SHS profilesFlat profiles and

angel profilesRound* profiles

Section factors Am/V m-1

for HSQ and closed profiles

when using shot nails

Am/V m-1

350ºC 400-750ºC 350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650-750ºC

60 25 25 25 25 25 25 25 25 25

65 25 25 25 25 25 25 25 25 25

70 25 25 30 25 25 25 25 25 25

75 25 25 30 25 25 25 25 25 25

80 25 25 30 25 25 25 25 25 25

85 25 25 30 25 25 25 25 25 25

90 25 25 30 25 25 25 25 25 25

95 25 25 30 25 25 25 25 25 25

100 25 25 30 30 25 25 25 25 25

105 25 25 30 30 25 25 25 25 25

110 25 25 30 30 25 25 25 25 25

115 25 25 35 30 25 25 25 25 25

120 25 25 35 30 25 25 25 25 25

125 25 25 35 30 25 25 25 25 25

130 25 25 35 30 25 25 25 25 25

135 25 25 35 30 30 25 25 25 25

140 25 25 35 30 30 25 25 25 25

145 25 25 35 30 30 25 25 25 25

150 25 25 35 35 30 25 25 25 25

155 25 25 35 35 30 25 25 25 25

160 25 25 40 35 30 25 25 25 25

165 25 25 40 35 30 25 25 25 25

170 25 25 40 35 30 25 25 25 25

175 25 25 40 35 30 25 25 25 25

180 25 25 40 35 30 25 25 25 25

185 25 25 40 35 30 25 25 25 25

190 25 25 40 35 30 30 25 25 25

195 25 25 40 35 30 30 25 25 25

200 25 25 40 35 30 30 25 25 25

205 25 25 45 35 35 30 25 25 25

210 25 25 45 40 35 30 25 25 25

215 25 25 45 40 35 30 25 25 25

220 25 25 45 40 35 30 25 25 25

225 25 25 45 40 35 30 25 25 25

230 25 25 45 40 35 30 25 25 25

235 25 25 45 40 35 30 25 25 25

240 30 25 45 40 35 30 25 25 25

245 30 25 45 40 35 30 25 25 25

250 30 25 45 40 35 30 25 25 25

255 30 25 45 40 35 30 25 25 25

260 30 25 50 40 35 30 25 25 25

265 30 25 50 40 35 30 25 25 25

270 30 25 50 40 35 30 25 25 25

275 30 25 50 40 35 30 30 25 25

280 30 25 50 40 35 30 30 25 25

285 30 25 50 45 35 30 30 25 25

290 30 25 50 45 35 30 30 25 25

NOTE: If the U/A is placed between two different board thicknesses, please take the thickest 11.11.30

R 30

FireFree® ScandiBoard for Passive Fire Protection of steel -

R 60

Design temperature

for HSQ and closed profiles when using shot nails

Am/V m-1

350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC 700ºC 750ºC

60 30 30 25 25 25 25 25 25 25

65 35 30 25 25 25 25 25 25 25

70 35 30 30 25 25 25 25 25 25

75 35 30 30 25 25 25 25 25 25

80 35 35 30 25 25 25 25 25 25

85 35 35 30 30 25 25 25 25 25

90 40 35 30 30 25 25 25 25 25

95 40 35 30 30 25 25 25 25 25

100 40 35 35 30 25 25 25 25 25

105 40 35 35 30 25 25 25 25 25

110 40 40 35 30 30 25 25 25 25

115 45 40 35 30 30 25 25 25 25

120 45 40 35 30 30 25 25 25 25

125 45 40 35 35 30 25 25 25 25

130 45 40 35 35 30 25 25 25 25

135 45 40 40 35 30 30 25 25 25

140 45 45 40 35 30 30 25 25 25

145 50 45 40 35 30 30 25 25 25

150 50 45 40 35 30 30 25 25 25

155 50 45 40 35 35 30 25 25 25

160 50 45 40 35 35 30 25 25 25

165 50 45 40 40 35 30 25 25 25

170 55 45 40 40 35 30 30 25 25

175 55 50 45 40 35 30 30 25 25

180 55 50 45 40 35 30 30 25 25

185 50 45 40 35 30 30 25 25

190 50 45 40 35 30 30 25 25

195 50 45 40 35 35 30 25 25

200 50 45 40 35 35 30 25 25

205 50 45 40 35 35 30 25 25

210 55 45 40 40 35 30 25 25

215 55 45 40 40 35 30 25 25

220 55 50 45 40 35 30 30 25

225 55 50 45 40 35 30 30 25

230 50 45 40 35 30 30 25

235 50 45 40 35 30 30 25

240 50 45 40 35 30 30 25

245 50 45 40 35 30 30 25

250 50 45 40 35 30 30 25

255 50 45 40 35 30 30 25

260 50 45 40 35 35 30 25

265 50 45 40 35 35 30 25

270 55 45 40 35 35 30 25

275 55 45 40 35 35 30 25

280 55 45 40 40 35 30 25

285 55 50 40 40 35 30 25

290 55 50 45 40 35 30 25

NOTE: If the U/A is placed between two different board thicknesses, please take the thickest 11.11.30

Design temperature

R 90

for HSQ and closed profiles when using shot nails

FireFree® ScandiBoard for Passive Fire Protection of steel -

Am/V m-1

350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC 700ºC 750ºC

60 35 35 30 30 25 25 25 25 25

65 40 35 35 30 25 25 25 25 25

70 40 35 35 30 30 25 25 25 25

75 40 40 35 30 30 25 25 25 25

80 45 40 35 35 30 30 25 25 25

85 45 40 40 35 30 30 25 25 25

90 45 40 40 35 35 30 25 25 25

95 45 45 40 35 35 30 30 25 25

100 50 45 40 40 35 30 30 25 25

105 50 45 40 40 35 30 30 25 25

110 50 45 45 40 35 35 30 25 25

115 50 50 45 40 35 35 30 30 25

120 55 50 45 40 40 35 30 30 25

125 50 45 40 40 35 30 30 25

130 50 45 45 40 35 35 30 25

135 55 50 45 40 35 35 30 30

140 55 50 45 40 35 35 30 30

145 55 50 45 40 40 35 30 30

150 50 45 45 40 35 30 30

155 50 45 45 40 35 35 30

160 55 50 45 40 35 35 30

165 55 50 45 40 35 35 30

170 55 50 45 40 40 35 30

175 50 45 40 40 35 30

180 50 45 40 40 35 30

185 50 45 45 40 35 30

190 50 50 45 40 35 35

195 55 50 45 40 35 35

200 55 50 45 40 35 35

205 55 50 45 40 35 35

210 50 45 40 35 35

215 50 45 40 40 35

220 50 45 40 40 35

225 50 45 40 40 35

230 50 45 45 40 35

235 50 45 45 40 35

240 55 50 45 40 35

245 55 50 45 40 35

250 55 50 45 40 35

255 55 50 45 40 35

260 55 50 45 40 35

265 50 45 40 35

270 50 45 40 40

275 50 45 40 40

280 50 45 40 40

285 50 45 40 40

290 50 45 40 40

NOTE: If the U/A is placed between two different board thicknesses, please take the thickest 11.11.30

R 120

Design temperature

FireFree® ScandiBoard for Passive Fire Protection of steel -

for HSQ and closed profiles when using shot nails

Am/V m-1

350ºC 400ºC 450ºC 500ºC 550ºC 600ºC 650ºC 700ºC 750ºC

60 50 45 40 40 35 35 30 30 25

65 50 45 45 40 40 35 35 30 30

70 50 50 45 45 40 35 35 30 30

75 55 50 50 45 40 40 35 35 30

80 55 50 45 45 40 40 35 30

85 50 50 45 40 40 35 35

90 55 50 45 45 40 40 35

95 50 50 45 40 40 35

100 55 50 45 45 40 35

105 50 50 45 40 40

110 55 50 45 40 40

115 55 50 45 45 40

120 50 50 45 40

125 55 50 45 40

130 55 50 45 45

135 50 45 45

140 50 50 45

145 55 50 45

150 55 50 45

155 55 50 45

160 50 50

165 50 50

170 55 50

175 55 50

180 55 50

185 50

190 50

195 50

200 55

205 55

210 55

215 55

220

225

230

235

240

245

250

255

260

265

270

275

280

285

290

NOTE: If the U/A is placed between two different board thicknesses, please take the thickest 11.11.30

Design temperature

R 180

FireFree® ScandiBoard for Passive Fire Protection of steel -

for HSQ and closed profiles when using shot nails

Data sheet Data 850 2011-08-23

www.scandisupply.com Page 1 of 1

FireFree® ScandiBoard 850

FireFree® ScandiBoard 850 is a

lightweight calcium silicate board,

which is tested according to EN

ISO 1716:2002, and approved

according to EN 13501-1:2007 as

non-combustible, A1.

FireFree® ScandiBoard 850 has

been tested for quartz and asbestos

content by The National Institute of

Occupational Health, Denmark. No

content of quartz or asbestos has

been detected.

FireFree® ScandiBoard 850 is

available in thicknesses from

22 - 100 mm and can be processed

to the dimension needed for a

specific construction from a max.

size of 2.440 x 1.220 mm.

Standard sizes

Length x width in mm

1.220 x 1.000

2.040 x 1.220

2.440 x 1.220

Special sizes and sanding on

request.

Tolerances in mm

Trimmed Sanded

Length/width ± 2,5 ± 2,5

Thickness ± 1,5 ± 0,5

Storage

The boards will be packed on

pallets. Place the pallets on a

smooth and dry spot and protect

them against the weather.

Product profile

FireFree® ScandiBoard 850 is

characterized by:

• Non-combustibility

• Extremely lightweight

• Good mechanical characteristics

• Frost resistant

• Low moisture expansion and

contraction

• Good thermal resistance

• Rot resistant

• No growing conditions for mould

and fungus

• Environmentally friendly

• Easy to machine and work with

Max. service temp. 1.000 °C

Bulk density, dry 250 kg/m³

pH value 10,3

Compressive strength

(EN 1094-5: 1995) 2,8 MPa

Modulus of rupture

(EN 993-6: 1995) 1,7 MPa

Coefficient of reversible thermal

expansion (BS 1902: section 5.3:

1990) @ 20°C-750°C (68°F-

1382°F) 5.5x10 -6

m/(mK)

Coefficient of moisture

expansion (DTI rep.) @ 23°C

50%RH to 23°C 10%RH,

4.0x10 -3

mm/(m%RH)

Coefficient of moisture

contraction (DTI rep.) @ 23°C

50%RH to 23°C 100%RH,

0 mm/(m%RH)

Sound reduction index

Thickness 19 mm 26 dB

Thickness 38 mm 29 dB

Thickness 60 mm 31 dB

Thermal conductivity

@ 20°C 0,06 W/(m×K)

@ 200°C 0,08 W/(m×K)

@ 400°C 0,10 W/(m×K)

@ 600°C 0.12 W/(m×K)

Chemical analysis, typical

Silica SiO2 47%

Calcium oxide CaO 45%

Loss on ignition

1025°C (1877°F) LOI 6%

Water content 2,5%

Colour Grey

Non-combustibility:

Tested according to EN ISO

1716:2002 and classified

according to the EN 13501-1:2007

as non-combustible: A1.

Material Safety Data Sheet MSDS F810-850 2011-08-24

www.scandisupply.com Side 1 af 2

Material Safety Data Sheet according to 93/112/EF

Non combustible material for fire protection

01 Product Identification

Company

FireFree® ScandiBoard 810

FireFree® ScandiBoard 820

FireFree® ScandiBoard 830

FireFree® ScandiBoard 850

Scandi Supply a/s Energivej 2 DK-5492 Vissenbjerg Denmark Phone: +45-7624 4800 Fax: +45-7624 4801 e-mail: info@scandisupply.dk www.scandisupply.com

02 Hazards Identification No special marking is required 03 Composition Substances and CAS No.

Calcium silicate, 1344-95-2 Calcite, 13397-26-7 Cellulose fibres

04 First Aid Measures

Inhalation Skin contact Eye contact Burn Other information

Due to the physical form of the product, the following precautions

are relevant only in case of cutting. Fresh air in case of sickness or discomfort. No special precautions. Rinse eyes in plenty of water. - -

05 Fire-fighting measures Extinguishing equipment Risks Personal protective

equipment

- The product is non-flammable -

06 Accidental release

. measures Personal protective

equipment Environmental protection Clearing

- Vacuuming of spills. See item 13 below.

07 Handling and storage Work place Storage Packing

No special precautions. No law-enforced requirements. Dry storage recommended. Various standard packing’s available.

08 Exposure controls/ personal protection Control method and

tolerances Breathing protection Hand and skin protection Eye protection

- The use of dust filters is recommended when cutting the product. No special protection required, gloves may be used by handling. Protective glasses recommended when cutting the product.

Material Safety Data Sheet MSDS F810-850 2011-08-24

www.scandisupply.com Side 2 af 2

09 Physical and chemical properties

Chemical composition: SiO2 (47%), Al2O3 (0.3%), Fe2O3 (0.3%), MgO (0.6%), K2O (0.1%), Na2O (0.1%), CaO (45%) Loss on ignition 6% Appearance: Greyish, porous board Density (bulk, dry): 225 - 250 - 300 kg/m3 Melting point: 1.345 C pH: 10,3 Solubility in water (20 C): 0 Solubility (organic): 0

10 Stability and reactivity Stable under normal circumstances. 11 Toxicological

. information Inhalation Consumption Skin contact Eye contact Long-term effects

Inhalation of dust may irritate the upper air passage. - No known effects. Mechanical irritation. No known effects.

12 Ecological information - 13 Disposal considerations Spills or waste can be removed as general building waste.

Chemical waste group: H. If during use the product takes up foreign substances, this must be

taken into account on removal. 14 Transportation

. information Outside classification limits

15 Regulatory information Danger symbols The product contains Risk regulations Safety regulations Special labelling

. regulations National regulations

None - - - None None

16 Other Information Application Restrictions of use Training requirements

Fire protection product None None

Prepared by Scandi Supply a/s

Production Plant: Fur Landevej 120 DK - 7870 Roslev

Head Quarters: Scandi Supply a/s Energivej 2 DK - 5492 Vissenbjerg

Scandi Supply a/s • Energivej 2 • DK-5492 Vissenbjerg • Tlf. +45 7624 4800 • Fax +45 7624 4801 • mail@scandisupply.dk

In case of fire, buildings need protection, valuables need shielding and human lives must be saved. The cornerstone in this respect is passive fire protection of building constructions, and Scandi Supply is a leading supplier of complete solutions to this end. Safety has top priority for Scandi Supply, and we take pride in choosing the right solution for every task. We never take a task lightly, and we are committed to making it easy for our customers and business partners to create valuable and secure results. Close cooperation is what leads to long lasting relations ... With over 20 years experience our advice and guidance are thoroughly tested - just like our products. We constantly work to develop innovative solutions and obtain new approvals. Please contact Scandi Supply to discuss your projects within the field of passive fire protection.

www.scandisupply.com