Fiat Ducato / Citroën Jumper / Peugeot Boxer

LED-daytime running light setBrief

Information

Fro

ntlig

hting

Ideas today forthe cars of tomorrow

For further details visit:

Find your local Hella Service Partner garage here:

www.daytime-running-light.com

www.hella.com/lightshow

www.hella-service-partner.com

Vehicle application: Fiat Ducato from model year 07/06, Peugeot Boxer from model year 04/06,

Citroen Jumper from model year 04/06

Product features � Radiant, brilliant white, rod-shaped

signal light off ers innovative LED

power with fi ve diodes per light.

� The high-performance LEDs have a

service life of more than 10,000

hours and therefore last as long as

the vehicle.

� The transparent lens off ers a clear

view of the refl ector.

� Low power consumption:

7 W at 12 V

� The design trims can be painted in

the colour of your choice

� The daytime running light set is ECE

and SAE type-approved

Scope of supply

� 2 daytime running lights

� 2 vehicle-specifi c design trims with

opening and mounting bracket

� 1 professional harness

� Fastening material (for easy

mounting)

� Installation Instructions

� 1 relay

Part no. 2PT 010 043-811

Optional accessories (not included in the scope of supply)

Extension cable 2-pole,

length 500 mm8KB 178 139-001

Ideas today forthe cars of tomorrow

© H

ella

KG

aA

Hueck &

Co

., L

ipp

sta

dt

12.1

0

Daytime running light provides a decisive safety advantage in

road traffi c and prevents 58% of accidents which result in

serious injuries*.

* Study carried out by the SWOV-Institute for Road Safety Research on behalf of

the EU.

Fig.: System comparison: low beam versus daytime running light

Attachment regulations

* When used as a position light, the minimum attachment

height must be 350 mm and the maximum distance from the

outside edge must be 400 mm.

** In the case of vehicles with a width <1,300 mm, the distance

has to be at least 400 mm.

See the internet for further legal stipulations and attachment

regulations or ask at a qualifi ed garage.

Installation

The daytime running light sets can be mounted easily:The lights can be mounted or clicked into position on the side in

a prepared cut-out in the bumper using a supplied fi tting spring.

Alternatively, they can be mounted respectively on two screw

bosses on the rear of the casing.

Suitable screws are provided with the fi ttings in the scope of

supply. Metal holders for connecting to a sturdy point on the

bumper need to be created individually by the customer.

For more information please refer to the assembly instructions.