FFT Perimeter Intrusion Detection

8/10/2019 FFT Perimeter Intrusion Detection

1/58

Future Fibre Technologies

Fibre Optic Perimeter Intrusion Detection

1Future Fibre Technologies 2013

FPID-PG02/13


2/58

FFT world leader in fibre optic

intrusion detection

100s of installations and thousands of kilometres of intrusion detectioninstalled in over 55 countries

Supported by a global network of FFT offices and accredited partners.

Future Fibre Technologies 2013 2


3/58

FFT a strong tradition of

innovation and world firsts

Since 1994 Future Fibre Technologies has been a leader in developingadvanced fibre optic sensing solutions for security applications.

First company to bring high end fibre optic sensing to the mass market

First company to be able to locate an event on a fibre optic perimeterintrusion detection system

First to incorporate advanced signal processing, intelligent algorithms andArtificial Intelligence to reduce nuisance alarms

First real-time fibre optic buried pipeline

intrusion detection system that locates ThirdParty Interference (TPI)

First long distance network protection system



4/58


5/58

Addressing key customer

requirements


Feature End User Consultant Integrator

A broad range of f ibre

optic solutions

Product support

Design assistance

Appl ication engineering

Powerful integration

capability

Ongoing R&D

Commissioning support

Maintenance & Service


6/58


7/58


8/58

FFT products

FFT provides a family of fibre optic intrusion detection solutions, delivering thecomplete range of end-to-end PIDS, pipeline protection, and network security solutions

Ability to deliver a system for the smallest to the most complex and demanding sites

FFT systems are built around a number of advanced features that:

Deliver high reliability with low maintenance

Operate over long distances - up to 80km or 50miles of sensor cable with a single system

Pinpoint the location of an event or intrusion to asclose as 6 metres (20 feet)

Have high detection rates (POD)

Have low nuisance alarms (NAR)



9/58


10/58

An example of signal discrimination


Signal discrimination inaction clear detection ofclimbs during heavy rain

Dynamic threshold

Heavy rainrecognised

Received signal from the sensor offence climbs during heavy rain

Processed Signal


11/58


12/58


13/58



14/58

FFT Secure Point

An economical entry level dual zone, remote capable controller withextremely low power consumption

Sensitive enough to work on most fence types

Intelligent eliminates nuisance alarms without compromising ondetection capability

Simple to install and configure Optional installation without fusion splices

Powerful interfacing options

Flexible configurations - can beeither rack mounted or field installed

2 year warranty with global support



15/58

Located in thecontrol room up to

10km away

Insensitive lead-in cable

Start Sensor

End Sensor

Medium level security site with remotely installed controller



16/58

Power from and commsto the control room

Optional NEMA 4field enclosure

High level security site with field installed controller



17/58

Custom high level security with remotely installed controller

Located in thecontrol room up to

10km away

Insensitive lead-in cable

Start & EndSensor



18/58

Powerful interfacing options

Standard Form C dry contacts

TCP/IP for high level integration is standard

Optional FFT CAMS SP software provides:

An intelligent, easy to understand operator screen

available in a range of languages

Direct communication to CCTV cameras

Communication to MODBUS and SCADA devices



19/58

Secure Point applications

Sites typically less than 1,000 metres or 3,000 ft in overall length

Where an uncomplicated yet highly effective perimeter protectionsolution is required

Locations subject to EMI, RFI or lightning strikes

Projects requiring easy, cost-effective installation

Projects needing reliability and high sensitivity combinedwith minimal nuisance alarms

When you need an entry level solution with the backup ofa proven global supplier



20/58

Secure Point applications

Utility substations

Solar farms

Storage yards & industrial complexes

Construction sites

Pumping stations

Well pads

Block valve sites

Small secure facilities



21/58



22/58

FFT Secure Zone

One system provides either 8 or 16 separate fence zones - if onezone is disabled, the remainder continue to work

Requires no electronics or power in the field

Advanced signal processing to eliminate nuisance alarms

Intrinsically safe and immune to EMI, RFI and lightning

Fast, real-time notification of an intrusion and instant activation ofCCTV cameras to capture intruders

Lowest total cost of ownership due to simple installation,low infrastructure costs and no field maintenance

Award winning - GSN Best Perimeter ProtectionProduct (Excluding Video) 2009



23/58

Secure Zone Installation



24/58

Secure Zone Installation



25/58

Secure Zone applications

Multi zone sites typically less than 3,000 metres in overall lengthwith chain link or weldmesh fences

Where the customer specifies redundant hardware zones

Installations where an intrinsically safe solution is required

Sites subject to EMI, RFI or lightning strikes

Projects requiring simple, cost-effective installation

Projects requiring a highly reliable solution with minimalnuisance alarms

Spec compliance with hardware zone based systems



26/58


27/58

Case Study deployed at a solar

power plant

FFT Secure Zone was selected to protect the perimeter of a 10-acresolar power plant in the USA that generates about 2.4 million kilowatt-

hours (kWh) of clean, renewable energy a year.

The plant features 4,620 sun-tracking solar panels, each worththousands of dollars. The risk of theft or damage to these panels was

very real. A highly reliable zone-based perimeter intrusion

detection system was required to protect this site.

Able to tolerate extreme UV levels, high temperatures

Unaffected by the strong electromagnetic fields present



28/58

Case Study Deployed at a solar

power plant

After evaluating a range of technologies, the reasons

the client settled on the FFT Secure Zone system:

High reliability and proven tolerance to extreme UV levels,high temperatures, and harsh conditions

Fibre optic based, so is unaffected by the strongelectromagnetic fields present

Ease of installation and maintenance

Minimal nuisance alarms

FFTs local support capability.



29/58

408



30/58

FFT Secure Fence 408

One system provides 8 separate zones - if onezone is disabled, the remainder continue to work

Sensitive enough to work on almost all fence types

Up to 40km of insensitive lead in for remote sites without power

Requires no electronics or power in the field

ARaD signal processing eliminates nuisance alarms

Intrinsically safe and immune to EMI, RFI and lightning

Real-time notification of an intrusion and instant activation of cameras tocapture intruders

Lowest total cost of ownership due to simple installation, low infrastructurecosts and no field maintenance

2 year warranty with global support



31/58



32/58

Secure Fence 108 Installation



33/58


34/58

Secure Fence 408 applications

Petrochemical, Oil & LNG facilities

Critical infrastructure, Power plants, Utilities, substations

Communication sites & Industrial complexes

Military bases, Prisons & Nuclear installations

VIP residences, Government facilities

Multiple small remote sites such as cellphone towers, well pads etc.

Pump stations and block valves onpipelines



35/58



36/58

FFT Secure Fence

The most advanced, proven, fibre optic perimeter intrusion detectionsystem available today.

One system handles even the longest perimeters - up to 80km or 50miles of sensor cable

Pinpoints intrusions to 25 metres or better on almost all fence types

Requires no power or electronics in the field

Immune to EMI, RFI and nuisance alarms

Lowest total cost of ownership

Award winning - GSN Best Perimeter Protection Product(Excluding Video) 2010



37/58



38/58

Secure Fence applications

Where the customer requires or specifies a system that pinpointsthe location of an intrusion

Where a long distance, intrinsically safe solution is required



Projects needing high reliability, fault tolerance and highsensitivity combined with minimal nuisance alarms

Wherever you need a locating PIDS solution with the

backup of a proven global supplier



39/58

Secure Fence applications

Critical NationalInfrastructures

Petrochemical plants

Military bases

Power stations

Airports

Oil refineries

LNG facilities

Mining sites

Country borders

Large storage sites

Sea ports

Prisons


Case Study installed at a 250km


40/58

Case Study installed at a 250km

Middle-East perimeter

40

This sensitive Middle East installation protects a perimeter fence

in excess of 250km long that runs through some of the toughest

desert conditions imaginable.

A system was required to detect and provide the precise location ofintruders without generating false alarms from the high desert winds

experienced in this region.

It had to be easy to install, reliable, with no ongoingmaintenance

Due to the remoteness of the site,there was never the option ofproviding power on the fence line.

Future Fibre Technologies 2013


41/58

Secure Fence deployed at military


42/58

Secure Fence - deployed at military

airbase to protect f ighter aircraft

FFT Secure Fence was recently selected to provide the perimeterprotection of fighter aircraft and equipment at a sensitive military

airbase in Asia-Pacific.

Protects the perimeter fence which is in excess of 7,000 meters or23,000 feet long by detecting all unauthorised intrusions.

Provides the precise location of intrusions so that CCTVcan be used for verification

A proven history of operating reliably at militaryairports in a range of harsh weather conditions

No trenching permitted belowrunways or taxiways



43/58


44/58

S


45/58

FFT Aura SR

One FFT Aura SR system handles mediumlength perimeters up to 16km or 10 miles long

The sensor cable can be installed on almost all fence types,covertly buried in the ground, or both simultaneously

Identify & track vehicles, people, and digging activities

Pinpoints intrusions to 6 metres (20ft) or better

Detect activity up to 25 metres away from the buried sensor*

Requires no power or electronics in the field

Sensor cable cut resilience - continued operation up to the point of the cablecut standard, with self-healing resiliency an option

Immune to EMI, RFI and lightning

45

*Distances may vary depending on soil type/conditionFuture Fibre Technologies 2013


46/58


FFT A SR li ti


47/58

FFT Aura SR applications

Where a medium distance, intrinsically safe fence mounted and/or covertlyburied perimeter intrusion detection solution is required

Where the customer specifies a PIDS system that locates an intrusion

Critical sites that demand a hardened intrusion detection solution with cablecut resilience or immunity

Installations where a covert buried intrusion detection system is required todetect footsteps and digging



Wherever you need a high resilience PIDS solution with thebackup and commitment of a proven global supplier




48/58


Critical NationalInfrastructures

Petrochemical plants

Military bases

Power stations

Oil refineries

Open areas

LNG facilities

Mining sites

Storage sites

Sea ports

Prisons

Manufacturing facilities



49/58


FFT CAMS product matrix


50/58

FFT CAMS SP FFT CAMS Lite FFT CAMS

Standard ApplicationFor use with FFT Secure Point systems only

and has a maximum discount of 30%.

For use with hardware zoned systems (SecureZone and Secure Fence 408 systems) only

and has a maximum discount of 30%.

For use with FFT Secure Fence, Secure Pipe,Secure Link and FFT Aura locating systems

License Restriction s

It is for up to 8 Secure Point controllers plusone Server/Client license both on the same

computer and is non-expandable. If you havemore than eight Secure Point controllers, ormore than one Server or Client, then you will

need to purchase FFT CAMS

It is for 1 Secure Zone or 408 controller plusone Server/Client license both on the same

computer and is non-expandable. If you havemore than one Secure Zone or 408 controller,or more than one Server or Client, then you

will need to purchase FFT CAMS

It is for multiple or combined hardware zonedsystems and/or any Locator systems and

comprises 1 Client plus 1 Server license. Ifyou want to display and manage FFT CAMS

from more than one location, then you willneed to purchase additional Client licenses

Add iti onal Clients No No Extra cost option

Number of controllers supported 8 1 >8

CCTV Interface (Pelco ASCII, Pelco D, andgeneral ASCII devices) Yes Yes Yes

PLC Interface Yes Yes Yes

ADAM 6060 Interf ace Yes Yes Yes

Email Interface Yes Yes Yes

SNMP Interface Yes Yes Yes

External PIDS device input e.g.

MicrowaveNo No Yes

Redundancy No No Extra cost option

Integration to Third Party security

management systemsNo No Extra cost option

Mobile Clients No No Extra cost option

FFT CAMS product matrix


FFT CAMS powerful integration


51/58

platform and user interface

FFT CAMS is the central software management system for FFT intrusiondetection systems. It displays alarms, allows users to manage the sensingcontrollers and is the basis of integration to third party software systems.

Displays alarms and controls zones on the site map

A multilingual, stand-alone Graphical User Interface (GUI). Available inEnglish, Spanish, German, French, Russian, Thai, Arabic and Koreanplus other languages as required

Interfaces to high level security management systems, CCTVsystems, as well as mobile devices

Logs alarms and operator responses to a secure SQL database.

Accepts external inputs and activates external devicessuch as CCTV cameras, lights, alarms, etc.

Advanced client/server architecturewith redundancy



52/58

FFT CAMS


53/58

FFT CAMS




54/58


54

For commercial applications, FFT is a Lenelcertified manufacturer of fibre optic intrusiondetection systems. In addition to Lenel, FFTproducts also interface to a range of other

security management systems includingC-CURE, JCI P2000, IndigoVision, DVTel,Milestone Xprotect and Bosch VMS. SDKsare available to create custom interfaces.

For military applications, FFT complies withUS Military JFPASS integration utilizing bothICD-0100b and its predecessor TASS orTactical Automated Security System.

In the area of CCTV, FFT interfaces to a broadrange of cameras and DVR systems andprotocols including Pelco ASCII, DVTel, Axisand Bosch.

Future Fibre Technologies 2013

FFT CAMS powerful integration

l tf d i t f


55/58

Fibre Optic Cable

TCP/IP

FFT CAMS Clients

Fibre Optic Cable

FFT CAMS Client& Server

platform and user interface


FFT industry awards


56/58

y

FFT Secure Zone - GSN Best Perimeter Protection Product(Excluding Video) 2009

FFT Secure Fence - GSN Best Perimeter Protection Product(Excluding Video) 2010

Governor of Victoria Export Awards winner for 2009 and 2010

Prime Ministers Australian Exporter of the Year 2010


Selection of FFT clients


57/58


Global support


58/58

Americas Asia Pacific Europe India Middle East

Future Fibre Technologies (US) Inc800 West El Camino Real, Suite 180Mountain View, CA 94040

USA

Future Fibre Technologies Pty Ltd10 Hartnett Close,Mulgrave, Vic., 3170

Australia.

Future Fibre Technologies Europe Ltd3000 Hillswood Drive,Hillswood Business Park

Chertsey, Surrey KT16 0RSUnited Kingdom

Future Fibre TechnologiesL-9/12, DLF City Phase II,Gurgaon, Haryana 122 002

India

Future Fibre Technologies MENA FZ-LLCDubai Internet City,Building 11, Office G-08

Dubai,United Arab Emirates

Phone: +1 (650) 903 2222Toll Free: +1 (877) 650 8900Fax: +1 (435) 417 6671

Phone: +61 3 9590 3100Fax: +61 3 9560 8000

Phone: +44 (0)1932 895 317Fax: +44 (0)1932 895 318

Phone: +91 124 4087020Fax: +91 124 4087019

Phone: +971 4 434 5361Fax: +971 4 439 3406

www.fftsecurity.com


Documents

FFT Perimeter Intrusion Detection