FEUP, Porto, Portugal - paginas.fe.up.pt · FEUP, Porto, Portugal The Faculty of Engineering of the University of Porto (FEUP) Classical Orchestra is a project from FEUP’s Cultural

FEUP, Porto, Portugal


SUNDAY, 21/06

10h:00 Registration

15h:30 Opening Ceremony

16h:00 Classical Orchestra of FEUP Concert

17h:00 Plenary Session | Thinking through the social leg of the stool | Caroline Baillie

18h:00 SPM Award Ceremony

18h:15 Welcome Reception

MONDAY, 22/06

08h:30 Plenary Session | Frontiers in Mechanics of Materials | Nicola Pugno

09h:30 LANEMA / Quadrant Technical Presentation

10h:00 Coffee-Break

10h:30 Oral Sessions A

12h:30 Lunch Break

14h:00 Plenary Session | Critical materials in smart products: Chances and Challenges for Materials Science and Engineering | Margarethe Hofmann-Amtenbrink

15h:00 Oral Sessions B

16h:00 Coffee-Break & Poster Session A

17h:30 Oral Sessions C

19h:15 Departure for Conference Dinner

20h:00 Conference Dinner

TUESDAY, 23/06

08h:30 Plenary Session | Spintronic devices: exploring new functionalities of magnetic materials | Paulo Freitas

09h:30 Oral Sessions D

10h:30 Coffee-Break

11h:00 Oral Sessions E

12h:30 Lunch Break

14h:00 Plenary Session | Once upon a time… A Scientific society | Paloma Fernandez

15h:00 Oral Sessions F

16h:30 Coffee-Break & Poster Session B

18h:00 Closure Ceremony

http://paginas.fe.up.pt/~materiais2015/wd/social/musical-programme/

http://paginas.fe.up.pt/~materiais2015/wd/conference/invited-speakers/#Caroline

http://paginas.fe.up.pt/~materiais2015/wd/conference/invited-speakers/




http://paginas.fe.up.pt/~materiais2015/wd/conference/invited-speakers/#Freitas

http://paginas.fe.up.pt/~materiais2015/wd/conference/invited-speakers/#Paloma


- Opening and Closing Ceremony - Plenary Sessions

Oral Sessions

A1, B1, C1, D1, E1, F1

Secretariat

Oral Sessions

A5, B5, C5

Poster Sessions (corredor)

A, B

Oral Sessions B001 B002 B003 A2 A3 A4 B2 B3 B4 C2 C3 C4 D2 D3 D4 E2 E3 E4 F2 F3 F4



The Faculty of Engineering of the University of

Porto (FEUP) Classical Orchestra is a project

from FEUP’s Cultural Commission, and is

mostly attended by FEUP community members

(students, technicians, teachers,

researchers). The artistic direction of the

project is entrusted to the conductor José

Eduardo Gomes. The presentation concert of

the FEUP’s Classical Orchestra took place in

December 2013.

JOSÉ EDUARDO GOMES

José Eduardo Gomes he’s graduated from the

Porto Music University with a Soloist Degree in

Clarinet, with Professor António Saiote. He

was also a student of Professor Thomas Friedli.

He is a founder member of Vintage Quartet.

As far as his studies in conducting are

concerned he is a graduated for an Orchestra

Conducting degree at the Haute École de

Musique de Genève, with mention Très Bien,

Geneva, Switzerland, under the guidance of

Professor Laurent Gay, and also studied Choir

Conducting, with Professor Celso Antunes.

From September 2008 to June 2011, he was

the Musical Director of the Chamber Orchestra

of Carouge in Geneva, Switzerland. He’s a

regular guest conductor in several Orchestras

and develops an intense pedagogical activity

with young orchestras as well. Recently, he

was assistant of Maestro Peter Eötvös, in a

project with the Oporto Symphony Orchestra

Casa da Música. Nowadays, he’s CPO Choir

Principal Conductor, Principal Conductor of

Orchestra Classic FEUP.

PROGRAMME

Mozart Magic Flute Overture

The Magic Flute K. 620, is one of the most

famous operas by Wolfgang Amadeus Mozart

to a German libretto by Emanuel Schikaneder.

It’s an opera which has the characteristic of

being to sing in the form of Singspiel, a form

of German-language music drama, now

regarded as a genre of opera, that included

both singing and spoken dialogue. The work

was premiered on 30 September 1791 at

Schikaneder’s theatre, the Freihaus-Theater

auf der Wieden in Vienna.

Sibelius Valse Triste

Valse triste, Op. 44, No. 1, is a short orchestral

work by the Finnish composer Jean Sibelius. It

was originally part of the incidental music he

composed for his brother-in-law Arvid

Järnefelt’s 1903 play Kuolema (Death), but is

far better known as a separate concert piece.

Bizet Carmen Suite no 1

Prélude

Aragonaise

Intermezzo

Séguedille


Les Dragons d’Alcala

Les Toréadors

The Carmen Suites are two suites of orchestral

music drawn from the music of Georges Bizet’s

1875 opera Carmen and compiled

posthumously by his friend Ernest Guiraud.

They adhere very closely to Bizet’s

orchestration.This first Suite contains the

famous Aragonaise, used by some other

composers, for example by Pablo de Sarasate,

for his Carmen Fantasy to solo violin and

orchestra.

F. Lehár Gold and Silver Waltz

In 1902, the Austro-Hungarian composer Franz

Lehár, composed one of his most famous

waltzes. He is mainly known for his operettas,

of which the most successful and best known

is The Merry Widow (Die lustige Witwe).

Tchaikovsky Flower Waltz

The “Waltz of the Flowers” (1892) is a piece

of orchestral music from the second act of The

Nutcracker, a ballet composed by

Tchaikovsky. Tchaikovsky told his fellow

musicians he was working on a “fantastic”

ballet called The Nutcracker: “It’s awfully fun

to write a march for tin soldiers, a waltz of the

flowers, etc.” The waltz is also the last

number in his Nutcracker Suite.

orquestra_classica©susana_neves


Caroline Baillie (AUS) “Thinking through the social leg of the stool”

The talk would be focused on her work for Waste

for life (wasteforlife.org) where marginalized

populations are enabled to improve their

livelihoods by developing products from the waste

they collect, as opposed to simply selling it to a

middleman. The materials research is done by

students and by local communities on the ground.

It is rudimentary materials research, involving the

search for waste based products which sell and can

be made by local communities (currently in Argentina and Lesotho and soon Sri Lanka) in poor

conditions without the addition of additives, and with only basic equipment. This means it is

extremely innovative but as it involves rubbish and basic processing, it is often not seen as such by

the materials community. Caroline Baillie would not be presenting data but context and the story

of how such sustainable materials development work is done.

Caroline is Chair of Engineering Education at UWA, Perth and has previously held

appointments at the University of Sydney, Imperial College, UK and Queens University,

Canada. Beginning her academic career in materials engineering, she has also gained

qualifications, expertise and experience in education and anthropology and she now works

at the juncture between these disciplines as well as between theory and practice. Caroline

is particularly interested in ways in which materials science and engineering can help to

create solutions for the environment as well as social problems. In 2006 she founded the

not for profit organization, Waste for Life (wasteforlife.org), which uses composites

materials knowledge to co-create income streams for marginalized populations in different

parts of the Global South. She has recently been awarded a large program grant from the

Australian Department for Foreign Affairs and Trade to develop a Waste for Life initiative

in Sri Lanka. Caroline is a Thomson Reuters Highly cited materials science author, with over

200 publications, papers and books on green materials, engineering education and

engineering and social justice.

http://wasteforlife.org/



Nicola Pugno (IT) “Frontiers in Mechanics of Materials”

In this Plenary Lecture Nicola M. Pugno will discuss his recent studies

on the mechanics of nanotubes, graphene and related composites as

well as of bio-inspired nanomaterials (e.g. mimicking nacre for

strength, spider silk for toughness, gecko foot for smart adhesion,

lotus leaf for self-cleaning, bone for self-healing, etc.), including a

new concept and its proof for making the world’s toughest fibres.

Nicola M. Pugno was born in 1972 in Pavia, Italy and is

currently married and has three babies. He holds a Master’s degree in Mechanical

Engineering and a Master’s degree in Physics, as well as a Ph.D. in Fracture Mechanics and

a Ph.D. in Biology. He is a Full Professor of Solid and Structural Mechanics at the University

of Trento, Italy and there Founder and Head of the Laboratory of Bio-Inspired and

Graphene Nanomechanics. He is also the Scientific Responsible of Graphene

Nanocomposites (within the Graphene Flagship) at the Fondazione Bruno Kessler, Trento,

Italy and Full Professor of Materials Science at the Queen Mary University of London,

London, UK. He has published about 235 International Journal (Int. J.) papers on Solid-,

Structural-, Fracture-, Bio- and Nano-Mechanics in leading international journals mainly

on nanotubes, graphene and related composites as well as on bio-inspired nanomaterials.

He is in the Editorial Board of about 40 Int. J. including Scientific Reports, and he is

Academic Editor of PlosOne and Editor-in-Chief of Bio-Inspired Materials as well as of

Frontiers in Materials – Mechanics. NMP has received the 2011 ERC Starting Grant and in

2013 both the two ERC Proof of Concept assigned to Italy by the European Research

Council.


QUADRANT HIGH-PERFORMANCE PLASTIC SOLUTIONS: A DAY IN YOUR LIFE WITH QUADRANT Giovanni Pretalli

Quadrant is a leading global manufacturer of high-performance thermoplastic materials in the form

of semifinished products and finished parts. The company has locations in 20 countries and more

than 2000 employees. Its specialty engineering thermoplastics and composites are superior in

performance to metals and other materials and are used in a wide range of applications, primarily

in the capital goods industry. Together with leaders in a broad variety of customer markets,

Quadrant is continuously developing new areas of application. With its new owner Mitsubishi

Plastics, Inc., Quadrant is well prepared to expand its market leadership position in the future.

Within the Quadrant Group, Quadrant Engineering Plastic Products (Quadrant EPP) is the world’s

leading manufacturer of semi-finished products. Quadrant EPP’s materials range from UHMW

polyethylene, nylon and acetal to ultra-high performance polymers that resist temperatures to over

425°C. The company’s rods, sheets, tubes and custom shapes are among others used to machine

components for the food and packing industries, the medical and pharmaceutical sector,

transportation industry, semiconductor manufacturing, aerospace, electronics, chemical processing

and various other industries. Quadrant EPP also manufactures finished products for these industries.

Products and services are available through a worldwide network of branch offices, technical

support centres and authorized dealers.


The Quadrant Materials Performance Pyramid

Quadrant EPP Deutschland GmbH,

Petra Brinkmann, Marketing Communications Europe


OS A1 | MAIN AUDITORIUM

55 VIS/NIR WAVELENGTH SELECTOR USING A TANDEM PI’N/PIN A-SIC:H OPTICAL FILTER

M. Vieira, M. A. Vieira, V. Silva, P. Louro, I. Rodrigues

56 OPTICAL SIGNAL PROCESSING AND DIVERSITY TECHNIQUES FOR DATA ERROR DETECTION AND CORRECTION USING a-SICH TECHNOLOGY

M. A. Vieira, M. Vieira, V. Silva, P. Louro

61 EXPERIMENTAL CHARACTERIZATION OF Ti6Al4V PARTS PRODUCED BY DISTINCT METAL ADDITIVE MANUFACTURING TECHNIQUES

Jorge Lino Alves, Frederico Gomes, Rui Neto, Teresa Duarte, Francisco Torres, Margarida Machado

125 PROCESSING AND FUNCTIONALIZATION OF CELLULAR CERAMIC TUBES

N. Vitorino, A. V. Kovalevsky, M. J. Ribeiro, J. C. C. Abrantes, J. R. Frade

139 PROCESSING AND CHARACTERIZATION OF POLY(ACID LACTIC) MICROSPHERES BY OIL IN WATER EMULSION TECHNIQUE

D. M. Correia, C. Ribeiro, V. Sencadas, G. Botelho, J. L. Gomes Ribelles, S. Lanceros-Méndez

158 STUDY OF THE VIABILITY OF MANUFATURING CERAMIC MOULDS BY ADDITIVE MANUFACTURING FOR INVESTMENT CASTING

Edwin Ocaña Garzón, Jorge Lino Alves, Rui J. Neto

181 IN SITU STUDIES OF Ni-Ti SHAPE MEMORY ALLOYS

F. M. Braz Fernandes, R. M. S. Martins, K. K. Mahesh, R. J. C. Silva, N. Schell

185 LITHIUM-DOPED SILK FIBROIN FILMS FOR APPLICATION INELECTROCHROMIC DEVICES

Rui F. P. Pereira, F. Sentanin, A. Pawlicka, M. Manuela Silva, Verónica de Zea Bermude

OS A2 | ROOM B001

38 LOW-COST 3D FOOD PRINTING Isaac Alves Ferreira, Jorge Lino Alves

46 EFFECTS OF MANUFACTURING IMPERFECTIONS ON THE FATIGUE LIFE OF SANDWICH SHELLS WITH REGARD TO WIND TURBINE ROTOR

Pedro Dolabella Portella, Dustin Nielowa, Volker Trappea

62 SHEAR FRACTURE TOUGHNESS AND COHESIVE LAWS OF ADHESIVELY-BONDED JOINTS

João C. S. Azevedo, Raul D. S. G. Campilho, Francisco J. G. da Silva

73 STRENGTH AND FAILURE MODES OF SINGLE-L ADHESIVE JOINTS BETWEEN ALUMINIUM AND COMPOSITES

Nuno R. E. Domingues, Júlia C. Trojan, Raul D. S. G. Campilho, Ricardo J. C. Carbas, Mariana D. Banea, Lucas F. M. da Siva

233 PROJECT BASED LEARNING AS A METHODOLOGY FOR COLLABORATIVE ENGINEERING IN THE PRODUCT AND INDUSTRIAL DESIGN MASTER AT FEUP. CASE STUDY OF THE DEVELOPMENT OF TWO SCHOOL CHAIRS WITH NAUTILUS.

Vítor Carneiro, Ângela Gomes, Bárbara Rangel

275 EFFECT OF THE CHEMICAL MILLING PROCESS ON THE SURFACE OF TITANIUM ALUMINIDE CASTINGS

Rui Neto, Teresa Duarte, Jorge Lino, Francisco Torres, João Pinto


OS A3 | ROOM B002

19 MECHANICAL CHARACTERIZATION OF MORTAR BEAMS

F. A. Costa Oliveira, S. Lopes, J. Cruz Fernandes

152 RESISTANCE OF A NONWOVEN GEOTEXTILE AGAINST MECHANICAL DAMAGE AND ABRASION

Mónica Dias, José Ricardo Carneiro, Maria de Lurdes Lopes

201 FOAMED BITUMEN: AN ALTERNATIVE WAY OF PRODUCING ASPHALT MIXTURES

Liliana Abreu, Joel Oliveira, Hugo Silva, Catarina Silva, Daniela Palha, Paulo Fonseca

207 ALTERNATIVE LOW COST CORE SYSTEMS OF VACUUM INSULATION PANELS DESIGNED FOR NEAR ZERO-ENERGY BUILDINGS

J. Corker, F. A. Almeida, M. Fan, R. Caps

212 COMPARATIVE ANALYSES OF THE EFFECTS OF TRIETHANOLAMINE AND TRISOPROPANOLAMINE COMBINED WITH CALCIUM NITRATE ON THE SHORT-TERM PROPERTIES OF CEMENT PASTES

M. Cheikh-Zouaoui, N. Chikh

235 STUDY OF THE INTERACTION BETWEEN ASPHALT AND PLASTIC WASTES IN NEW POLYMER MODIFIED BINDERS (PMB)

Liliana Costa, Sara Fernandes, Hugo Silva, Joel Oliveira

322 SHEAR RESISTANCE OF CONCRETE REINFORCED WITH ULTRA-HIGH STRENGTH STEEL FIBRES

José Gomes, Carlos Sousa, Mário Pimentel, Ana Maria Proença, A. Serra Neves

247 EFFECT OF INCORPORATING DIFFERENT WASTE MATERIALS IN BITUMEN

Sara Fernandes, Liliana Costa, Hugo Silva, Joel Oliveira

OS A4 | ROOM B003

83 HIGH-VOLUME FLY ASH ULTRA-HIGH PERFORMANCE CONCRETE

Iman Ferdosian, Aires Camões

173 DEVELOPMENT OF A SUSTAINABLE DESIGN PROJECT FOR SOCIAL REINTEGRATION

Daniela Carriço, Bárbara Rangel

196 PHOSPHATE REMOVAL FROM WASTEWATER EFFLUENT BY ADSORPTION ONTO FeOOH AND RECOVERY AS MAGNESIUM SALT

Kyriaki Kalaitzidou, Manassis Mitrakas, Christina Raptopoulou, Athanasia Tolkou, Anastasios Zouboulis

222 PLA RECYCLED AND WOOD - A NEW MATERIAL COMBINATION

Margarida Caldas, Lígia Lopes, Jorge Lino Alves

240 MECHANICAL CHARACTERIZATION OF SAND AND POLYURETHANE RESIDUE MIXTURES STABILISED WITH ALKALI ACTIVATED FLY ASH

Mónica Dias, Maria de Lurdes Lopes, Tiago Miranda, Nuno Cristelo, Dinis Leitão, Ernesto Lucas

248 CHARACTERIZATION OF EUCALYPTUS BASED POLYMER COMPOSITES

M. Franco, C. Malça, A. Mateus, N. Alves

336 COPPER RECOVERY FROM WASTE PRINTED CIRCUIT BOARDS THROUGH A THERMAL/MECHANICAL PROCESS

E. Ventura, S. Pinho, M. F. Almeida, A. Futuro, J. M. Dias

4 BIODEGRADATION IMPACT ON “GREEN” PLA/GRAPHENE-NANOPLATELETS COMPOSITES, MECHANICAL PROPERTIES AND TOXICITY

Artur M. Pinto, Carolina Gonçalves, Inês C. Gonçalves, Fernão D. Magalhães


OS A5 | ROOM B014

121 TAILORING THE MICROSTRUCTURE AND PROPERTIES OF CRN THIN FILMS BY HIPIMS IN DEEP OSCILLATIONS MAGNETRON SPUTTERING (DOMS) MODE

F. Ferreira, J. C. Oliveira, A. Cavaleiro

155 INFLUENCE OF ANODIZING PARAMETERS ON STEEL AND ALUMINUM ALLOYS SURFACE OLEO/HYDRO-PHOBIC/PHILIC CHARACTER

S. P. Rodrigues, A. Cavaleiro, S. Carvalho

159 ADSORPTION OF PHENOL ON SILICA AEROGELS USING A STIRRED TANK AND A FIXED BED COLUMN

Joana Marques, Telma Matias, Artur J. M. Valente, António Portugal, Margarida Quina, Licínio Gando-Ferreira, Luísa Durães

189 NOVEL SURFACE TREATMENT FOR POLYMERIC SUBSTRATES Sílvia Cruz, Luís A. Rocha, Júlio C. Viana

286 METAL, CERAMIC AND CERMET INTERFACE DEPOSITION FEATURES BY COLD GAS SPRAY AT NANOSCALE

N. Cinca, S. Dosta, A. Concustell, M. Couto, A. M.Vilardell, I. G. Cano, J. M. Guilemany

306 COEFFICIENT OF FRICTION MEASUREMENT IN SIMILAR CONDITIONS TO THE EJECTION PHASE IN INJECTION MOULDING PROCESS

Ângela Rodrigues, António J. Pontes

335 LOW PRESSURE GAS NITRIDING OF STEEL: TECHNICAL ASPECTS AND PRODUCTS CHARACTERISTICS

A. Duarte, B. Branco

348 COMPARISON OF PROTECTION PERFORMANCE BETWEEN PTA Ni-BASED AND SPUTTERED TiSi(V)N COATINGS

F. Fernandes, T. Polcar, J. Ferreira, A. Cavaleiro


Margarethe Hofmann-Amtenbrink (CH) “Critical materials in smart products: Chances and Challenges for Materials Science and

Engineering“

During the last 5 years challenges with resources and supply of some

important elements became an important factor in the development

and innovation of various products especially in the fields like energy,

communication technologies, automotive, aerospace, construction,

or machinery and equipment sectors. The European Union has

addressed this problem, and an “Ad-Hoc Working Group on Defining

Critical Raw Materials” consisting of experts from different European

governmental and private organisations have prepared two reports in

2010 and in 2013. They identified critical elements playing a major

role for the European economy such as Antimony, Beryllium,

Chromium, Cobalt, Gallium, Germanium Indium, Graphite, Niobium, Tungsten, Rare Earth

Elements, and others. For industrial development and innovation strategies, companies are

depending on a) access to such elements, b) a certain price stability and c) sustainably supply. Not

all of this was the case during the last years. These instabilities affect the competition in Europe

and especially between Europe and China. Although Europe and the United States have many ore

deposits, for less common elements China is controlling more than 95% of this market.

Margarethe Hofmann-Amtenbrink is the founder and owner of MatSearch.

She is materials scientist, and trained in literature and patent search. She

consulted companies, organized and conducted scientific and technical

conferences and seminars together with national and international organizations.

In the last years she concentrated her activities in creating and managed various

research programs and projects in Switzerland and in Europe in the field of

advanced materials, biomaterials, biotechnology, and nanotechnology for health

(FP5 and FP7). She is President of the Federation of European Materials Scocieties

and is also managing the Swiss Foundation Entwicklungsfonds Seltene Metalle, ESM.


Since February 2015, the market access to China has been opened again, and prices of critical

materials decreased, which is welcomed by the materials industry, but however might have an

impact on the exploration of new resources, increased recycling rates and maybe the development

of novel substitution strategies and recycling methods in the Western world. Europe’s research and

development is leading in many industrial sectors because of its innovative approaches, and the

European market is growing in fast-changing sectors like communication, transport, health sector

and energy, Most of these innovations are based on materials research and development which has

been undertaken the last 20 years. Materials innovation takes a long time from idea to marketable

products. To prevent wrong strategies of long-term materials research and development, it is

necessary today and for the future to consider in materials research the reserves and availability

of critical elements, their mining and processing as well as substitution, end-of-life use and

recycling potential.


OS B1 | MAIN AUDITORIUM

194 ZnO NANOROD ARRAYS BY CHEMICAL SPRAY: DEVELOPMENT AND PROPERTIES

Malle Krunks, Inga Gromõko, Tatjana Dedova, Arvo Mere, Ilona Oja Acik

195 PLASMONIC ABSORBERS AND SOLAR CELLS BY NON-VACUUM CHEMICAL SPRAY METHOD

A. Mere, A. Katerski, E. Kärber, I. Oja Acik, M. Krunks

202 LOW DIMENSIONAL MAGNETOELECTRIC CFO/PVDF MICROPARTICLES

R. Gonçalves, P. Martins, D. M. Correia, V. Sencadas, G. Botelho, S. Lanceros-Méndez

203 THE USE OF FUNCTIONALIZED NANOFIBRILLATED CELLULOSE IN CORROSION PROTECTION

A. Caetano, R. Duarte, A. Reis, J. Tedim, A.P. Mendes de Sousa, J. Ataíde, M. G. S Ferreira, D. Evtyugin

OS B2 | ROOM B001

120 ENERGY SAVING TILES

M. P. Seabra, Rui M. Novais, Guilherme Ascensão, J. A. Labrincha, H. Jorge, S. Bastos

123 ELECTRICAL CONDUCTIVITY, OXYGEN NONSTOICHIOMETRY AND THERMAL EXPANSION OF Nd1-xSr1+xNiO4±d (x = 0-0.6) AS OXYGEN ELECTRODE MATERIALS FOR SOFC/SOEC

Ekaterina Kravchenko, Kiryl Zakharchuk, Jekabs Grins, Gunnar Svensson, Vladimir Pankov, Aleksey Yaremchenko

150 EFFECT OF DRYING TEMPERATURE ON POLY(VINYLIDENE FLUORIDE) POLYMER BINDER FOR C-LiFePO4 CATHODE SLURRY PREPARATION

A. Gören, C. M. Costa, S. Ferdov, D. Cíntora-Juárez, J. L. Tirado, M. M. Silva, S. Lanceros-Méndez

153 TAILORING POLY(VINYLIDENE FLUORIDE - CO - CHLOROTRIFLUOROETHYLENE) MICROSTRUCTURE AND PHYSICAL PROPERTIES BY EXPLORING ITS BINARY SYSTEMS WITH N,N DIMETHYLFORMAMIDE

R. E. Sousa, J. C. C. Ferreira, C. M. Costa, A. V. Machado, M. M. Silva, S. Lanceros-Méndez

OS B3 | ROOM B002

43 ENVIRONMENTAL AND ECONOMIC LIFE CYCLE ASSESSMENT OF POLYMERS AND COMPOSITES MATERIALS AND PARTS. A REVIEW.

C. A. Bernardo, Carla L. Simões, Lígia M. Costa Pinto

50 THE CORK PROJECTION FOCUSED IN THE DEVELOPMENT OF A SUSTAINABLE SURFBOARD BASED ON SCIENTIFIC DESIGN

João Teixeira, Ermanno Aparo, Mafalda Lopes Laranjo

57 MERCURY REMOVAL FROM GASES BY IRON MANGANESE OXYHYDROXIDES

Kokkinos Evgenios, Kellartzis Ioannis, Stavropoulos G. Georgios, Mitrakas Manasis

80 ALTERNATIVE SOLUTION FOR THERMAL REHABILITATION OF BUILDINGS WITH POLYSTYRENE PANELS

Adrian Bojan, Anca-Gabriela Popa, Ioana-Eugenia Tanasescu


OS B4 | ROOM B003

283 EXPERIMENTAL AND ANALYTICAL EVALUATION OF THE STRESS-STRAIN CURVES OF AA5754-T4 AND AA6061-T6 BY HYDRAULIC BULGE TEST

Hugo Campos, Abel D. Santos

287 IMPROVING MIXING PROCESSES WITH THE HELP OF NUMERICAL TOOLS

L. L. Ferrás, J. M. Nóbrega, J. A. Covas

310 OPTIMIZATION OF A COMPOSITE STRUCTURE THROUGH THE USE OF A METAHEURISTIC OPTIMIZATION METHOD AND FINITE ELEMENTS

Ricardo Sá, Ismael F. Vaz, F. W. J. van Hattum, J. M. A. César de Sá, J. P. Nunes

354 AN IMPROVED METHODOLOGY FOR IMPACT CRASH SIMULATION OF INJECTION MOULDED PART

Carlos N. Barbosa, Francisco Carvalho, Júlio C. Viana, Markus Franzend, Thomas Baranowski, Ricardo Simões

OS B5 | ROOM B014

107 INFLUENCE OF THE SCREEN PRINTING PARAMETERS ON THE THICKNESS OF THE DEPOSITED GOLD INK LAYER IN DECALS FOR DECORATION OF CERAMIC PRODUCTS

M. C. S. R. Costa, L. P. N. C. Simões, M. Caiado, J. C. Almeida, I. M. Miranda Salvado, M. H. F. V. Fernandes, F. M. Costa, A. B. Lopes

267 NON-RELEASING ANTIFOULING POLYMERS FOR WATERBORNE SYSTEMS

E. R. Silva, O. Ferreira, M. J. Calhorda, J. C. Bordado

15 MAGNETITE NANOPARTICLES IN HEXAVALENT CHROMIUM REMOVAL

E. Kaprara, M. Mitrakas, M. Angelakeris, N. Pliatsikas, G. Vourlias, N. Andritsos, K. Simeonidis

295 SYNTHESIS OF NOVEL NANOMATERIALS AND THEIR CHARACTERIZATION USING ATOMIC FORCE MICROSCOPY AND LIGHT SCATTERING

Costas S. Patrickios, Theodora Krasia-Christoforou, Eleni J. Kepola, Marios Elladiou, Nikolaos Mastroyiannopoulos, Leonidas A. Phylactou, Edna N. Yamasaki, Holger Schönherre


A1 10 MICROSTRUCTURE AND MECHANICAL PROPERTIES

OF Al/SiC SURFACE COMPOSITE LAYER PRODUCED BY FRICTION STIR PROCESSING

M. J. Cristóbal, C. M. Abreu, R. Acuña ,M. Cabeza, P. Merino, D. Verdera

A2 23 DEVELOPMENT OF BIOPLASTICS FROM AGRO-WASTES

Maria João Macedo, I. Moura, M. Oliveira and A.V. Machado

A3 41 DEVELOPMENT OF FLUORESCENT NANOCOMPOSITES BASED ON CdTe QUANTUM DOTS

Vanessa Oliveira, I. Moura, A. V. Machado

A4 44 THE EFFECT OF SIZE, AMOUNT AND SURFACE TREATMENT OF MICRO PARTICLES OF CORK ON THE TOUGHNESS OF A BRITTLE EPOXY

A. Q. Barbosa, L. F. M. da Silva, J. Abenojar, M. Figueiredo, A. Öchsner

A5 47 PROCESS MODEL FOR THE IDENTIFICATION OF DEMANDS OF NEW MATERIALS AND TECHNOLOGIES IN THE DESIGN: CASE STUDY OF THE BACTERIAL CELLULOSE

Debora Barauna, Michele Tais, D. C. Zamoner, Dalton L. Razera, Denise A. K. Silva

A6 48 APPLICATIONS OF ELASTIC SCATTERING AND COMPUTER SIMULATION OF ENERGY SPECTRA TO SURFACE ANALYSIS OF MATERIALS

José A. R. Pacheco de Carvalho, Cláudia F. F. P. R. Pacheco, António D. Reis

A7 49 APPLICATIONS OF MEV ION BEAMS, NUCLEAR REACTIONS AND COMPUTER SIMULATION TO SURFACE ANALYSIS OF MATERIALS

José A. R. Pacheco de Carvalho, Cláudia F. F. P. R. Pacheco, António D. Reis

A8 64 THE MATHEMATICAL MODELING FOR THE ELECTROPOLYMERIZATION OF ACID DERIVATIVES OF HETEROCYCLIC COMPOUNDS OVER ACTIVE METALS

V. Tkach, S. C. de Oliveira, O. I. Aksimentyeva, V. Nechyporuk, P. Yagodynets

A9 68 DEVELOPMENT OF CELLULOSE ACETATE MEMBRANES CONTAINING NANOPARTICLES FOR WATER APPLICATIONS

Joana Silva, Ana S. Abreu, M. Oliveira, A. V. Machado

A10 72 EXPERIMENTAL SIMULATION OF COOLING RATES THROUGH JOMINY TEST IN THE SAE 1026 STEEL GETTING THE VARIATIONS OF THE MECHANICAL PROPERTIES

Fernandes, M. T., Jácome, P. A. D., Ferreira, I. L., Silva, L. M., Monteiro, P. C. P.

A11 78 EVOLUTION OF SURFACE TENSION AND GIBBS-THOMSON COEFFICIENT DURING ALUMINUM ALLOYS SOLIDIFICATION

Jácome, P. A. D., Fernandes, M. T., Garcia, A., Ferreira, I. L.

A12 79 IN VITRO STUDY OF PLATELET BEHAVIOUR ON TITANIUM SURFACE MODIFIED BY PLASMA

J. O. Vitoriano, C. Alves Jr., D. C. Braz, H. A. Rocha, R. C. Lima da Silva

A13 86 EMERGENCY MEDICAL VEHICLES: MATERIAL BENCHMARKING AND MECHANICAL PROPERTIES

J. Luís, T. Carvalho, L. S. O. Pires, R. Torcato, J. M. Oliveira, S. P. M. Silva, P. Lima

A14 88 REMOVAL AND/OR RECOVERY OF PHOSPHATES BY PRECIPITATION AS FERRIC PHOSPHATE FROM THE EFFLUENT OF A MUNICIPAL WASTEWATER TREATMENT PLANT

Athanasia Tolkou, Kyriaki Kalaιtzidou, Christina Raptopoulou, Manassis Mitrakas, Anastasios Zouboulis

A15 90 ANALYSIS OF POLYDICYCLOPENTADIENE-METAL HYBRID ADHESIVE JOINTS FOR AUTOMOTIVE EXTERIOR BODY APPLICATIONS

André Camboa, João Pedro Nunes, Jorge Lino Alves

A16 96 OPTOELECTRONIC PROPERTIES OF PYRENE COUPLED POLY(2,5-DITHIENYLPYRROLE) DERIVATIVES

Nese Guven, Pinar Camurlu, Baris Yucel

A17 98 PREPARATION OF SILICA NANOPARTICLE COATINGS CONTAINING HEXAGONAL BORON NITRIDE

H. Erdem Çamurlu, Ahmet Gençer

A18 104 USE OF ADVANCED COMPOSITES MATERIALS IN STRENGTHENING REINFORCED CONCRETE COLUMNS

M. Cheikh-Zouaoui, N. Chikh

A19 115 DESIGN OF CERAMIC MIXTURES WITH REFRACTORY WASTE FROM STEEL INDUCTION FURNACE

Abílio Silva, José Nunes, André Martins, Ana Segadães


A20 119 HIDDEN VALUE IN CERAMIC PIGMENTS WITH MAGNETIC PROPERTIES

R. M. Novais, M. P. Seabra, R. C. Pullar

A21 127 PVD LITHIUM BATTERY ENCAPSULATION

J. F. Ribeiro, R. Sousa, D. J. Cunha, E. M. F. Vieira, L. M. Gonçalves, M. M. Silva, L. Dupont, J. H. Correia

A22 129 ELECTROCHEMICAL PROPERTIES OF CORE-SHELL POLYPYRROLE/POLY(VINYLIDENE FLUORIDE) ELECTROSPUN FIBERS

J. Dias, G. Botelho, T. Otero, V. Sencadas, S. Lanceros-Méndez

A23 138 NOVEL ANISOTROPIC MAGNETOELECTRIC EFFECT ON δ-FeO(OH)/P(VDF-TrFe) MULTIFERROIC COMPOSITES

P. Martins, A. Larrea, R. Gonçalves, G. Botelho, E. Venkata Raman, S. K. Mendiratta, V. Sebastian, S. Lanceros-Mendez

A24 141 SIZE EFFECTS ON THE MAGNETOELECTRIC PERFORMANCE OF POLY(VINYLIDENE FLUORIDE)/EPOXY/VITROVAC LAMINATED COMPOSITED

M. P. Silva, P. Martins, C. S. Lehmann, A. Lasheras, J. Gutiérrez, S. Lanceros-Mendez, J. M. Barandiarán

A25 143 DAMAGE ASSESSMENT MODEL FOR DRILLED COMPOSITES LAMINATE PLATES

Jorge Silva, Filipe Ferreira, Stella M. Abreu, João E. Matos, João Manuel R.S. Tavares, Luís M. Durão

A26 146 ON THE OPERATING CONDITIONS OF SOLID-STATE MAGNETIC REFRIGERATORS

B. D. Bordalo, D. J. Silva, J. Puga, J. P. Araújo, J. C. R. E. Oliveira, A. M. Pereira, J. Ventura

A27 151 IMPROVING LITHIUM ION BATTERY PERFORMANCE BY COMPUTER SIMULATIONS OF THEIR INTERDIGITATED STRUCTURE

D. Miranda, R. E. Sousa, A. Gören, C. M. Costa, A. M. Almeida, M. M. Silva, S. Lanceros-Méndez

A28 154 EFFECT OF THE DEGREE OF POROSITY ON POLY(VINYLIDENE FLUORIDE-TRIFLUOROETHYLENE)/POLY(ETHYLENE OXIDE) BLENDS FOR LITHIUM-ION BATTERY SEPARATORS

A. Gören, C. M. Costa, M. N. Tamaño Machiavello, D. Cíntora-Juárez, J. Nunes-Pereira, J. L. Tirado, M. M. Silva, J. L. Gomez-Ribelles, S. Lanceros-Méndez

A29 163 WC CEMENTED CARBIDES WITH MARTENSITIC BINDERS

F. Silva, C. M. Fernandes, A. M. R. Senos

A30 176 DEVELOPMENT OF A NEW U 200 PULTRUSION DIE TO PRODUCE GRP COMPOSITE PROFILES USING DIFFERENT THERMOSETTING RESINS

D. Melo, J. P. Nunes, M. Vasconcelos

A31 198 MDF AND PB ACTIVATED CARBONS FOR ADSORPTION OF DYES FROM LIQUID PHASE

J. A. F. L. Gomes, B. C. Azaruja, P. A. M. Mourão

A32 199 ADSORPTION OF PESTICIDES ONTO ACTIVATED CARBONS FROM WOOD COMPOSITES

V. Almodôvar, I. P. P. Cansado, J. A. F. L. Gomes, P. A. M. Mourão

A33 206 INFLUENCE OF THE DYNAMICAL MOBILITY IN Li 3D NEGATIVE ELECTRODE MORPHOLOGY SIMULATIONS

J. C. R. E. Oliveira, M. H. Braga

A34 208 DEVELOPMENT OF BIO-BASED THERMO-REGULATING NANOFIBERS BY ELECTROSPINNING

J. Corker, M. Gonçalves

A35 213 SUPERHYDROPHOBIC COATINGS WITH ENHANCED PROPERTIES FOR LARGE WIND TURBINE BLADES

Cano I. G., Concustell A., Robotti M., Dosta S., Guilemany J. M.

A36 214 URBCORK - URBAN FURNITURE WITH HIGH DENSITY AGGLOMERATED CORK APPLICATION

Mariana Alves, Lígia Lopes, Jorge Lino Alves, Francisco Xavier de Carvalho

A37 231 THE Cu-Li-Mg-H SYSTEM: ITS CATALYTIC SYSTEM M. H. Braga, R. R. Avillez

A38 239 FUNCTIONALLY GRADED NiTi SHAPE MEMORY ALLOYS

F. E. Ferreira, A. R. Alves, J. P. Oliveira, F. Braz Fernandes

A39 241 REUSABILITY AND PHOTOCATALYTIC ACTIVITY OF PVDF-TRFE NANOCOMPOSITES

Sara Teixeira, P. M. Martins, Klaus Kuehn, S. Lanceros-Méndez, Gianaurelio Cunibert

A40 245 THE LIVING MATERIALS

Luís Guedes de Carvalho, Francisco Guedes de Carvalho, Nuno Leite Costa

A41 246 TRANSMISSION OF SIGNALS USING WHITE AND VISIBLE LEDS FOR VLC APPLICATIONS

P. Louro, V. Silva, I. Rodrigues, M. A. Vieira, M. Vieira

A42 273 NUMERICAL SIMULATION OF RESIDUAL STRESSES AND WARPAGE INDUCED DURING THE MANUFACTURE OF A BUTT-WELDED JOINT

Diogo F. Almeida, Rui F. Martins, João B. Cardoso

A43 278 FABRICATION, CHARACTERIZATION AND LUMINESCENCE ENHANCEMENT OF NEW CaWO4:Dy3+ INCORPORATED INTO SILICA XEROGEL

Beata Grobelna, Anna Synak, Piotr Bojarski, Dorota Głowaty, Elżbieta Szczepańska, Natalia Kawecka

A44 280 GROWTH OF DIAMOND/WC COMPOSITE COATINGS USING THE HOT-FILAMENT CHEMICAL VAPOR DEPOSITION TECHNIQUE

M. A. Neto, A. J. S Fernandes, F. J. Oliveira, R. F. Silva


A45 296 STUDY OF NANOMECHANICAL PROPERTIES OF (1-y) BST-yMgO THIN FILMS

Dionizy Czekaj, Agata Lisińska-Czekaj

A46 305 STUDY OF COMPOSITIONALLY GRADED BST THIN FILMS WITH PFM

Dionizy Czekaj, Agata Lisińska-Czekaj, Dmitry Kozodaev

A47 307 MECHNICAL PROPERTIES AND STRAIN INHOMEGENEITY INVESTIGATION IN REINFORCED PLYWOOD WITH DRILLED HOLES

Tomasz Brynk, Magdalena Jurczyk-Kowalska, S. Krauze, M. Kowalski

A48 313 INFLUENCE OF FLAME RETARDANT POLYURETHANE FOAM ON FLAMMABILITY OF THE UPHOLSTERY SYSTEMS

M. Jurczyk-Kowalska, J. Radziszewska- Wolińska, D. Milczarek, S. Krauze, M. Kowalski

A49 315 SYNTHESIS AND STRUCTURE OF Bi5FeTi3O15 CERAMICS

Agata Lisińska-Czekaj, Dionizy Czekaj

A50 317 FABRICATION AND STRUCTURE OF LMO-BASED CERAMICS

Aldona Zarycka, Jan Ilczuk

A51 320 BRIDGED SILSESQUIOXANES WITH PENDING ALKYL CHAINS PREPARED BY ACID-CATALYZED SOL-GEL REACTIONS: STRUCTURAL AND MORPHOLOGICAL PROPERTIES

S. C. Nunes, R. A. S. Ferreira, L. D. Carlos, P. Almeida, X. Cattoën, M. Wong Chi Man, V. de Zea Bermudez

A52 327 INFLUENCE OF PROCESSING CONDITIONS ON CRYSTAL STRUCTURE OF BiNbO4 CERAMICS

Agata Lisińska-Czekaj, Dionizy Czekaj

A53 77 THE INFLUENCE OF FILLER POLYMERIC SENSORS ON THE MECHANICAL PROPERTIES OF SMART COATINGS

D. Almeida, A.S.M. Trino, J. Tedim, J. Carneiro, M.G.S. Ferreira


OS C1 | MAIN AUDITORIUM

210 LASER WELDING OF A Cu-Al-Mn SUPERELASTIC SHAPE MEMORY ALLOY

J. P. Oliveira, Boyd Panton, Z. Zeng, T. Omori, R.M. Miranda, N. Zhou, F. Braz Fernandes

227 GROWTH OF COMPLEX COLLOIDAL FILMS

C. S. Dias, N. M. A. M. Araújo, M. M. Telo da Gama

238 PRODUCING LFT COMPOSITE PARTS FOR LARGE CONSUMPTIOM MARKETS FROM THERMOPLASTIC POWDER-COATED TOWPREGS

F. M. Rodrigues, J. P. Nunes, P. J. Novo, J. F. Silva

263 INFLUENCE OF HEAT TREATMENTS ON THE SENSITIZATION OF A SUPERMARTENSITIC 13%Cr STEEL

Sérgio Souto Maior Tavares, Manoel Ribeiro da Silva, Juan Manuel Pardal, Mariana Bertonceli Silva, Marcelo Camargo Severo de Macedo

266 EFFECT OF EXPLOSIVE RATIO ON EXPLOSIVE WELDING QUALITY OF COPPER TO ALUMINIUM

A. Loureiro, R. Mendes, J. B. Ribeiro, R. M. Leal

272 DESIGN OF A SELF-CONTAINED BREATHING APPARATUS (SCBA) USING A CARBON FIBRE REINFORCED POLYMER AND THE FILAMENT WINDING TECHNIQUE

L. Fernandes, Rui F. Martins, Paulo P. Silva

OS C2 | ROOM B001

303 WEIGHT LOSS, THERMAL AND MECHANICAL PROPERTIES OF PLA/GNP AND PLA/CNT-COOH BIODEGRADABLE NANOCOMPOSITES DURING HYDROLYTIC DEGRADATION

Viviana Correia Pinto, José Xavier, Marta Martins, Nuno Rocha, Carolina Gonçalves, Fernão D. Magalhães, Rui Miranda Guedes

358 HARDMETAL COMPONENTS RECOVERY BY THERMAL DEPOSITION

F. W. Rodrigues, Eduardo Soares, F. M. Costa

1 CO2 SEQUESTRATION IN CORK PRODUCTS FOR INDUSTRIAL, DESIGN AND BUILDING APPLICATIONS

Luís Gil, Paulo Silva

344 MECHANICAL BEHAVIOUR ASSESSMENT OF UNSATURATED POLYESTER POLYMER MORTARS FILLED WITH NANO-SIZED Al2O3 AND ZrO2 PARTICLES

S. P. B. Sousa, M. C. S. Ribeiro, P. R. O. Nóvoa, C. M. Pereira, A. J. M. Ferreira

122 IONIC LIQUID-BASED MATERIALS: NEW STRATEGIES TO DESIGN IMPROVED CO2 SELECTIVE MEMBRANES

Liliana C. Tomé, Isabel M. Marrucho

230 EFFECT OF HEAT TREATMENT ON Ni-Ti ENDODONTIC FILES Machado, A., Fernandes, F. M. B.


OS C3 | ROOM B002

29 FRICTION STIR TEXTURING

M. I. Costa, C. Leitão, A. Ramalho, D. M. Rodrigues

60 SPRAYING OF A WC-12Co CGS LAYER OVER A WC-Co HVOF COATING

M. Couto, S. Dosta, I. G. Cano, J. M. Guilemany

84 DEVELOPMENT OF FUNCTIONAL ADDITIVES BASED ON CORK FOR ANTI-CORROSION COATINGS

A. Caetano, F. Maia, L. Santos, J. Tedim, D. Evtyugin, M. G. S. Ferreira

103 CHARACTERIZATION OF NOBLE METALLIC THIN COATINGS ON LEAD GLASS SUBSTRATES

A. R. M. Sarabando, J. Mesquita-Guimarães, F. M. Santos, A. B. Lopes, A. P. Rodrigues, L. C. Alves, R. C. da Silva, A. Gil, A. Sá

172 STRUCTURAL STUDY AND AB-INITIO SIMULATION OF TaOx COATINGS DEPOSITED BY MAGNETRON SPUTTERING

C.F. Almeida Alves, L. Marques, F. Paumier, T. Girardeau, D. Schneider, S. Carvalho

OS C4 | ROOM B003

95 USE OF PIG BONE IN VIVO FOR SIMULATION OF MASTICATORY PROCESS WITH DENTAL IMPLANTS

Moura, A. F. B. M., Sousa, J. A. L., Andrade, A. C., Aquino, G. dos S., Medeiros, J. T. N.

12 NEURO-MUSCULAR REGENERATION USING SCAFFOLDS WITH MESENCHYMAL STEM CELLS (MSCS) ISOLATED FROM HUMAN UMBILICAL CORD WHARTON’S JELLY

A. C. Maurício, A. R. Caseiro, Tiago Pereira, Jorge Ribeiro, J. D. Santos, A. L. Luís

17 BIOMATERIALS FOR SKELETAL MUSCLE REGENERATION - HOW CAN WE IMPROVE BIOCOMPATIBILITY AND CLINICAL OUTCOMES?

A. R. Caseiro, T. Pereira, P. J Bártolo, D. Santos, A.L. Luís, A. C. Maurício

27 DEVELOPMENT OF A HYALURONIC ACID-CHITOSAN-SILOXANE HYBRID HYDROGEL FOR UNDIFFERENTIATED MESENCHYMAL STEM CELLS PROLIFERATION

Joana M. Martins, Yuki Shirosaki, Dina M. Silva, A. R. Caseiro, A. C. Maurício, José D. Santos

30 MULTIFUNCTIONAL ELECTROSPUN FIBRE MEMBRANES ASSOCIATED TO BONE GRAFTS FOR BONE REGENERATION

Daniel Santos, Dina M. Silva, J. D. Santos, Vitor Sencadas

31 PREPARATION AND CHARACTERIZATION OF BIOACTIVE CALCIUM PHOSPHATE MACROPOROUS GRANULES FOR ORTHOPEDIC APPLICATIONS

Cristina O. Correia, Dina M. Silva, Pedro S. Gomes, Maria H. Fernandes, José D. Santos


OS C5 | ROOM B014

22 SENSING PROPERTIES OF NANOSCALED II-VI BASED COMPOUNDS

G. Escalante, B. Sotillo and P. Fernández

66 ELECTRICAL RESPONSE TO HUMIDITY OF TiO2:WO3 SENSORS DOPED WITH VANADIUM INVESTIGATED BY IMPEDANCE SPECTROSCOPY

Juliano Libardi, Pedro M. Faia, Cristina Louro, Itamar M. Barbosa

92 MAGNETIC AND ELECTRICAL PROPERTIES OF COPPER DOPED MANGANESE FERRITE

Valesca Donizeti de Oliveira, Manoel Ribeiro da Silva, Rero Marques Rubinger, Adhimar Flávio de Oliveira, Claudiney Sales Pereira Mendonça, Geovane Rodrigues

94 MAGNETIC PROPERTIES OF COBALT DOPED MANGANESE FERRITE

Manoel Ribeiro da Silva, Laura Guimarães, Priscila Veloso, Flavia Gonçalves, Valesca Donizeti de Oliveira

160 STUDY OF MULTIFERROIC LuMn1±zO3±δ (0.00 ≤ z ≤ 0.08), BREAKING THE GEOMETRIC MAGNETIC FRUSTRATION BY SELF-DOPING

F. Figueiras, D. Karpinsky, A. Baghizadeh, P. B. Tavares, Soma Das, J. Agostinho Moreira, A. Kholkin, J. M. Vieira, V. S. Amaral



Paulo Freitas (PT) “Spintronic devices: exploring new functionalities of magnetic materials”

Magnetic materials have been with us for decades, used in

permanent magnets, in soft ferrite and amorphous magnetic

cores, in steels, etc… The exploitation of their properties in

thin film format was first done in the data storage industry

(magnetic hard disk, thin film read and write heads).

Component development followed an aggressive roadmap that

required technology changes from simple AMR (anisotropic

magnetoresistance) read heads (from late 80s to 1996), to GMR

(giant magnetoresistance) based heads (up to 2004-2005), and

later to TMR (tunnel magnetoresistance) based heads (present).

The HDD industry moved from in plane recorded media to perpendicular recorded media around

2006.

Paulo Freitas was a postdoctoral Research Fellow at the IBM Watson Research

Center, Yorktown Heights, New York, USA (1986-87) after his PhD at the Carnegie

Mellon University. From 1990 to 2000, he was Director of the Solid State Technology

Group at INESC and since 2000, Director of INESC-MN.

Paulo Freitas has been a full professor of Physics at the Instituto Superior Técnico

since 2003, was President of the Department of Physics from 2006 to 2008, and

coordinates the Biomedical Engineering Integrated Masters Course at IST since

2008. In 2007, he joined the Installation Commission of the International Iberian

Nanotechnology Institute (INL) and was appointed Deputy Director General in 2009.

Paulo Freitas received several awards and distinctions, namely: the Fundação

Calouste Gulbenkian Prize in the area of Nanotechnologies, as PhD supervisor of H.

Ferreira (2004); the Prémio Excelência, from the Portuguese Foundation for

Science and Technology (2005-2006); the 2nd Finalist of Descartes Prize for


Research (2007), awarded by The European Commission; and was nominated a

Distinguished Lecturer from the IEEE Magnetics Society (2008).

Freitas’ current research include GMR heads for ultra-high density recording, spin-

dependent tunneling junctions, non-volatile memories, magnetic multilayers and

thin films, micro magnetism, transport phenomena, GMR sensors, bioelectronics

and biosensors. He is author of more than 350 scientific articles, one patent and

inventor of a bioelectronic device. Paulo Freitas supervised 17 PhD students, more

than 20 post-doctoral fellows, and develops an intense educational mission to train

and coach new scientists and engineers.

TMR elements started to be used in Magnetic Random Access Memories (MRAM) around 2006, but

technology here also changed rapidly to cope with requirements from the non-volatile memory

industry (from using Oe fields to switch the storage layer, to using the spin polarized current through

the memory element to switch it).

The magnetic sensor market, presently dominated at around 70-80% by Hall effect sensors and in

the rest by AMR sensors, is now looking at GMR and predominantly TMR sensors to cope with more

demanding applications. In this talk I will review the development of these magnetic thin film

devices showing diverse applications of these technologies spanning also industrial sensor and

biosensing applications.


OS D1 | MAIN AUDITORIUM

16 THE ROLE OF TENSION-COMPRESSION ASYMMETRY OF THE PLASTIC FLOW ON DUCTILITY AND DAMAGE ACCUMULATION OF POROUS POLYCRYSTALS

J. L. Alves, M. C. Oliveira, L. F. Menezes, O. Cazacu

110 MECHANICAL AND MICROSTRUCTURAL BEHAVIOUR OF DUAL PHASE STEELS SHEET

J. A. Sousa, I. Bdikin, A. B. Lopes

284 MECHANICAL PROPERTIES DETERMINATION OF DUAL-PHASE STEELS USING UNIAXIAL TENSILE AND HYDRAULIC BULGE TEST

Rui Amaral, Abel D. Santos, A. B. Lopes

323 EVIDENCE OF BIMODAL DEFECT DISTRIBUTION BY X-RAY DIFFRACTION IN TM IMPLANTED Al0.15Ga0.85N

S. Magalhães, M. Fialho, K. Lorenz, E. Alves

OS D2 | ROOM B001

289

HYBRID POROUS NANOMATERIALS FOR ENERGY APPICATIONS André Costa, Vânia André, Pedro Atienzar, Miriam Sousa, Maykel de Miguel, Maria Teresa Duarte, Hermenegildo García, Carlos Baleizão

229 THE ROLE OF Li3ClO-BASED ELECTROLYTE IN Li-ION/SULFUR BATTERIES

M. H. Braga, J. A. Ferreira, A. Murchison

243 PREPARATION AND CHARACTERIZATION OF SOLID POLYMER ELECTROLYTES BASED ON CHITOSAN AND CERIUM TRIFLATE

R. Alves, A. Pawlicka, M. M. Silva

124 OPTIMIZED MAGNETOELECTRIC COMPOSITES AND POWER CIRCUIT FOR ENERGY HARVESTING APPLICATIONS

M. P. Silva, Diogo S. Reis, A. Lasheras, P. Martins J. Gutiérrez, S. Lanceros-Mendez, J. M. Brandiarán

OS D3 | ROOM B002

237 ADVANCED COATINGS FROM ARCHITECTURED HYBRID NANOPARTICLES

Tânia Ribeiro, Susana Piçarra, J. M. Gaspar Martinho, Carlos Baleizão, José Paulo S. Farinha

242 COMPARATIVE PHOTOCATALYTIC EFFICIENCY OF TiO2 NANOPARTICLES IN SUSPENSION VS. IMMOBILIZED INTO PVDF-TRFE MEMBRANES

P. M. Martins, R. Miranda, C. J. Tavares, G. Botelho, S. Lanceros-Mendez

3 APPLICATION OF COMPUTATIONAL THERMODYNAMICS TO THE DETERMINATION OF DENSITY AND SPECIFIC HEAT OF AN Al-5.5 wt.% Si-3.0 wt.% Cu ALLOY AS A FUNCTION OF TEMPERATURE

M. C. C. Paresque, F. C. Nascimento, F. Bertelli, A. Furtado, A. Garcia, I. L. Ferreira

290 HYBRID MESOPOROUS SILICA NANOPARTICLES FOR THERANOSTICS

Ana Sofia Rodrigues, Elizabete Coutinho, Tânia Ribeiro, José Paulo S. Farinha, Carlos Baleizão


OS D4 | ROOM B003

74 SHEAR COHESIVE LAW ESTIMATION OF ADHESIVE LAYERS BY DIGITAL IMAGE CORRELATION

Ana C. C. Leitão, Raul D. S. G. Campilho, João C. S. Azevedo, Daniel C. Moura, Mariana D. Banea

82 PARALLELIZATION OF KINETIC MONTE CARLO ALGORITHM TO SIMULATE AL3SC PRECIPITATION

Alfredo Moura, António Esteves

140 RESIDUAL STRESS FIELD AND DISTORTIONS RESULTING FROMWELDING PROCESSES: NUMERICAL MODELLING USING SYSWELD

Tiago R. Lima, Sérgio M. O. Tavares, Paulo M. S. T. de Castro

65 THE MECHANISM FOR THE ELECTROANALYTIC ACTION OF TRIAZOLIC DERIVATIVES OF CONDUCTING POLYMERS AND ITS MATHEMATICAL REPRESENTATION

Volodymyr Tkach, Sílvio César de Oliveira, Somayeh Tajik, Reza Ojani, Petro Yagodynets


OS E1 | MAIN AUDITORIUM

311 MICRO HOT EMBOSSING: INFLUENCE OF TWO DIFFERENT BINDERS ON 316L METAL PARTS

E. W. Sequeiros, V. C. Neto, M. T. Vieira, M. F. Vieira

343 NONDESTRUCTIVE TESTING IN MICROFABRICATION USING BACTERIA

T. J. Ferreira, A. R. Farinha, T. G. Santos, R. Miranda, C. C. Carvalho and M. T. Vieira

346 HIGH-SPEED MACHINING CHIPS CHARACTERIZATION S. C. Godinho, R. F. Santos, M. T. Vieira

28 DISSIMILAR FRICTION STIR LAP WELDING OF HEAT AND NON-HEAT TREATABLE ALUMINIUM ALLOY

M. I. Costa, I. Galvão, C. Leitão, D. M. Rodrigues

20 TOOL ASSISTED FRICTION WELDING

T. Mira-Aguiar, M. I. Costa, D. Verdera, I. Galvão, C. Leitão, D. M. Rodrigues

21 RESISTANCE SEAM WELDING OF ALUMINIUM, ZINC AND GALVANIZED STEEL: A WELD DEFECT ANALYSIS

T. Mira-Aguiar, I. Galvão, C. Leitão, D. M. Rodrigues

OS E2 | ROOM B001

71 DISPERSION OF GRAPHITE NANOPLATELETS IN POLYPROPYLENE MELTS: INFLUENCE OF MATERIAL AND PROCESS PARAMETERS

R. M. Santos, C. Vilaverde, M. C. Paiva, J. A. Covas

345 MECHANICAL BEHAVIOUR ANALYSIS OF POLYESTER POLYMER MORTARS REINFORCED WITH TIRE RUBBER FIBRES

S. P. B. Sousa, M. C. S. Ribeiro, E. M. Cruz, G. M. Barrera, A. J. M. Ferreira

347 EFFECTS OF CARBON NANOTUBE MODIFIED ADHESIVE LAYER ON LOW VELOCITY IMPACT AND FLEXURAL PROPERTIES OF CORK CORE SANDWICH STRUCTURES

Ígor A. R. Lopes, Fernando P. B. Macedo, Albertino J. C. Arteiro, Ana L. M. A. Reis, Paulo J. R. O. António T. Marques

33 EFFECT OF CARBON BLACK NANOPARTICLES CONCENTRATION ON THE MECHANICAL PROPERTIES OF A STRUCTURAL EPOXY ADHESIVE

R. J. C. Carbas, L. F. M. da Silva, L. F. S. Andrés

91 CHARACTERIZATION OF TEPs-MODIFIED ADHESIVES

M. D. Banea, L. F. M. da Silva, R. J. C. Carbas, R. D. S. G. Campilho

126 EFFECT OF IONIC LIQUID TYPE ON THE PHYSICOCHEMICAL PROPERTIES OF POLY(VINYLIDENE FLUORIDE)/IONIC LIQUID BLENDS

J. C. Dias, R. Mejri, A. C. Lopes, G. Botelho, M. M. Silva, S. B. Hentati, J. M. S. S. Esperança, S. Lanceros-Méndez


OS E3 | ROOM B002

100 ENERGY TRANSFER MECHANISMS IN YAG:Dy SYSTEM

J. F. C. Carreira, M. R. N. Soares, F. M. Costa, T. Monteiro, L. Rino

128 LOCAL SURFACE PLASMON RESONANCE OF METALLIC NANOPARTICLES EMBEDDED IN AMORPHOUS SILICON

A. Fantoni, M. Fernandes, Y. Vigranenko, M. Vieira

133 GD2O3:EU3+/PPO/POPOP/POLYSTYRENE COMPOSITES FOR INDIRECT X-RAY DETECTION

J. Oliveira, P. M. Martins, P. Martins, V. Correia, J. G. Rocha, S. Lanceros-Mendez

142 UPGRADING OF CGO GRAIN BOUNDARIES CONDUCTIVITY J. C. C. Abrantes, E. Gomes, J. R. Frade

200 ALL-INKJET-PRINTED ADJUSTABLE LOW-PASS FILTER FOR PRINTED STRAIN SENSORS BASED ON PIEZORESISTIVE MATERIAL

H. F. Castro, V. Correia, E. Sowade, K. Y. Mitra, J. G. Rocha, R. R. Baumann, S. Lanceros-Méndez

279 LOCAL DYE CONCENTRATION IN HYBRID POROUS NANOLAYERS

A. Synak, B. Grobelna, L. Kułak, A. Lewkowicz, P. Bojarski

OS E4 | ROOM B003

35 EFFECT OF STERILIZATION METHOD ON ELECTROSPUN POLY (LACTIC ACID) (PLA) FIBRES FOR BONE REGENERATION APPLICATIONS

T. A. M. Valente, V. Sencadas, D. M. Silva, P. S. Gomes, M. H. Fernandes, J. D. Santos

114 ANTIBACTERIAL PROPERTIES OF FIBROUS STENTS COATED WITH SILVER OXIDE NANOCOATINGS

Rita Rebelo, Nívea Vila, Raul Fangueiro, Sandra Carvalho, Mariana Henriques

188 INTRAOCULAR LENSES AS DRUG DELIVERY SYSTEMS

Andreia Pimenta, Dimitriya Bozukova, Rogério Colaço, Benilde Saramago, Ana Paula Serro

211 NOVEL DRY MULTIPIN ELECTRODES FOR RAPID ELECTROENCEPHALOGRAPHIC RECORDING

P. Pedrosa, P. Fiedler, J. Haueisen, F. Vaz, C. Fonseca

215 PREPARATION AND ELECTRICAL POLARIZATION OF A CHITOSAN AND HYDROXYAPATITE COMPOSITE FOR HARD TISSUE ENGINEERING

A. F. Correia, A. C. Videira, J. E. Pereira, C. F. C. João, E. R. Neagu, M. P. F. Graça, L. F. V. Pinto, J. C. Silva, J. P. Borges, M. C. Lança

216 OSTEOGENISIS ENHANCEMENT OF HYDROXYAPATITE BASED MATERIALS BY ELECTRICAL POLARIZATION

A. C. Videira, A. F. Correia, J. E. Pereira, M. P. F. Graça, E. R. Neagu, L. F. V. Pinto, J. C. Silva, J. P. Borges, M. C. Lança


Paloma Fernandez (SP) “Once upon a time… A Scientific society”

The first Scientific Societies were born in Italy in XVIth Century. The

first scientific discoveries, such as we understand in a modern context,

questioned the fixed and dogmatic positions from leading classes,

mainly the Church. A necessity arose to find places or forums where

the “new scientists” could discuss their new points of view. In 1560, in

Naples, was founded the Accademia Secretorum Naturae, also in Rome

from 1603 to 1630, the Academia dei Lincei played a role and later in

this century the Great Duke Fernando de Médicis gave support to la

Accademia del Cimento. In England, Francis Bacon in his work Novum

Organum (1620) defended the necessity of such institutions and some

authors consider that this was one the reasons for Charles II to found

the Royal Society in 1660. Although most of the prominent English

scientist had begun to meet in Gresham College in London, and later, during the civil war in Oxford,

since 1645 with the suggestive name of Invisible College.

In France, in 1666, Luis XIV founded la Académie des Sciences. In Germany at the beginning of this

century an attempt was also made in Rostock, however the first German institution which could be

considered a Scientific Society was founded by the Prussian emperor Federico in 1700.

Paloma Fernandez is the head of the Spanish Materials Society and member of

the General Assembly of the European Federation of Materials Societies (FEMS), in

which SOCIEMAT is integrated. Since September 2013 she is also member of FEMS’

Executive Committee.

She is part of the Materials Physic Department since 1986 and since 2007 she is full

professor in the scientific fields of Materials Science and Metallurgic Engineering.

The role and interests of all these primitive societies were different, in Italy were more focused on


the controversies between incipient Science an orthodoxy, in France and England on the practical

Sciences or Engineering, but in all cases were the seed for the present scientific societies, and in

many cases the origin of some of the most prestigious institutions.

Nowadays, most of the primitive objectives of the Scientific Societies have been overcome, also

the new Technologies and in particular the new information paradigm, have created a new scenario,

should then the Societies be redefined, what is their new role? Paraphrasing President Kennedy, do

not ask what can your Society make for you, but what can you do for your Society?


OS F1 | MAIN AUDITORIUM

268 EFFECT OF ULTRASONIC ENERGY IN THE DISPERSION TREATMENT OF AN Al-CNT NANOCOMPOSITE

Sónia Simões, Filomena Viana, Marcos A. L. Reis, Manuel Vieira

276 TRIBOLOGY TESTING TO FRICTION DETERMINATION IN SHEET METAL FORMING PROCESSES

Anvar Makhkamov, Dipak Wagre, António M. Baptista, Abel D. Santos, Luís Malheiro

281 OPTIMIZATION OF MWCNT-METAL MATRIX COMPOSITES FEEDSTOCKS

T. J. Ferreira, M. T. V. Vieira

298 ROLE OF PRESSURE-ASSISTED SINTERING IN BaLa4Ti4O15 MICROSTRUCTURE

Manuela Fernandes, Nivas B. Selvaraj, João C. C. Abrantes, Ana M. R. Senos, Paula M. Vilarinho

301 THERMAL STABILITY OF NANOSTRUCTURED COPPER FILMS R. F. Santos, F. Viana

334 IMPROVING THE RESIDUAL STRESSES OF AZ31B MAGNESIUM ALLOYS BY CRYOGENIC MACHINING

M. J. Marques, A. C. Batista, J. C. Outeiro

OS F2 | ROOM B001

353 A STUDY ON WEAR BEHAVIOUR OF METAL-REINFORCED, CERAMIC-REINFORCED AND HYBRID ALUMINUM COMPOSITES

G. Miranda, M. Buciumeanu, O. Carvalho, S. Madeira, D. Soares, F. S. Silva

357 THE INFLUENCE OF REINFORCEMENT ON DAMPING BEHAVIOUR AlSi-SiC COMPOSITES

S. Madeira, O. Carvalho, V.H. Carneiro, D. Soares, F. S. Silva, G. Miranda

326 EFFECT OF HEAT INPUT ON MICROSTRUCTURE AND STRENGTH OF WELDS IN TANTALUM AND NIOBIUM ALLOYS

M. Bexiga, A. Tavares, F. Melo, A. Loureiro

18 INFLUENCE OF Si AND HEAT TREATMENT ON THE MEYER’S INDEX OF CHROMIUM WHITE CAST IRONS

Leonardo Goyos, Angel Varela, Santiago Castellanos, Ana García, José Mier, Michel Moors

25 THE USE OF THERMAL ANALYSIS TO FORECAST THE DENDRITIC COHERENCY POINT ON NODULAR IRON MELTS

Vitor Anjos, C. A. Silva Ribeiro

97 LOW-TEMPERATURE NITRIDING OF VA-GROUP METAL POWDERS (V, Nb, Ta) IN FLOWING NH3 GAS UNDER HEATING WITH CONCENTRATED SOLAR BEAM AT PSA

J. C. Fernandes, F. A. C. Oliveira, L. G. Rosa, J. Rodríguez, I. Cañadas, T. Magalhães, N. Shohoji


OS F3 | ROOM B002

93 ADHEREND MATERIAL EFFECT ON THE TENSILE FRACTURE TOUGHNESS OF MODERN TOUGH STRUCTURAL ADHESIVES

M. D. Banea, L. F. M. da Silva, R. J. C. Carbas, R. D. S. G. Campilho

144 A COMPARISON OF METHODOLOGIES FOR FATIGUE ANALYSIS OF SHAFTS: DIN 743 vs. APPROACHES BASED ON SODERBERG CRITERION

Sérgio M.O. Tavares, Paulo M. S. T. de Castro

149 AN OVERVIEW ON ADVANCES IN MANUFACTURING PROCESSES OF PARTS IN TITANIUM AND TITANIUM ALLOYS

Santiago David Castellanos Villa, Jorge Lino Alves, Rui J. Neto

228 MATERIAL SELECTION FOR AN OFF-ROAD MOTORCYCLE RACING WRIST BRACE

Diogo Manuel dos Santos Matos, Jorge Lino Alves, Bárbara Rangel

259 EXPERIMENTAL CHARACTERIZATION OF CERAMIC SHELLS FOR INVESTMENT CASTING OF REACTIVE ALLOYS

Rui Neto, Teresa Duarte, Jorge Lino Alves, Francisco Torres

OS F4 | ROOM B003

218 SYNTHESIS PARAMETERS OPTIMIZATION OF IRON-OXIDE MAGNETIC SILICA SPHERES FOR BIOMEDICAL APPLICATIONS

V. F. Cardoso, S. Irusta, N. Navascues, G. Botelho,G. Minas, S. Lanceros-Méndez

244 POLYMERIC IONIC LIQUIDS AS COATINGS FOR SOLID PHASE MICRO EXTRACTION FIBERS

David J. S. Patinha, Liliana C. Tomé, M. Isik, D. Mecerreyes, Armando J. D. Silvestre, Isabel M. Marrucho

250 ASSESSING THE APPLICATION OF POLYPROPYLENE MULTIFILAMENT YARNS IN BRAIN PHANTOMS

Catarina Guise, Raul Fangueiro, Walter Schneider, João Miguel Nóbrega

264 SURFACE MODIFICATION OF INTRAOCULAR LENSES BY PLASMA GRAFTING FOR CONTROLLED RELEASE OF MOXIFLOXACIN

A. P. Vieira, A. F. R. Pimenta, P. Alves, P. Coimbra, M. H. Gil, J. L. G. C. Mata, A. P. Serro, A. J. Guiomar

265 STRUCTURAL AND MECHANICAL CHARACTERIZATION OF DENTAURUM AND ORMCO ORTHODONTIC WIRES

Joana Cruz, Rafaella Magalhães, Francisco Manuel Braz Fernandes

304 THE MECHANICAL RESPONSE OF THE REINFORCED-GROUND MATRIX IN THE PORCINE ANNULUS FIBROSUS TO UNIAXIAL COMPRESSIVE LOADING

Araújo, A. R. G., Peixinho, N., Pinho, A. C. M., Claro, J. C. P.


B1 8 PREPARATION BY POLYMERIZED-GEL MEDIATED SYNTHESIS AND CHARACTERIZATION OF COMPACT La0.6Sr0.4Fe1-yCoyO3-x CATHODES FOR INTERMEDIATE TEMPERATURE FUEL CELLS

J. Tartaj, J. M. Pérez-Falcón, D. Pérez Coll

B2 11 NANO-BIOCOMPOSITES AS ACTIVE PACKAGING FOR FOOD APPLIANCE – PROSPECTS AND CONSTRAINTS

Victor Gomes Lauriano de Souza, Ana Luísa Fernando

B3 14 NANOPOWDERS OF WC-AISI 316L STAINLESS STEEL PREPARED BY HIGH ENERGY BALL MILLING

D. A. Amancio, C. M. Fernandes, J. V. R. Toledo, E. O. Corrêa, G. Silva, A. M. R. Senos

B4 24 UPWARD AND DOWNWARD UNSTEADY-STATE DIRECTIONAL SOLIDIFICATION OF A HYPOEUTECTIC Al-3wt.%Mg ALLOY

C. Brito, F. Bertelli, M. A. P. Castanho, P. R. Goulart, J. E. Spinelli, N. Cheung, A. Garcia

B5 36 SOLID CERTIFIED WOODS IN FURNITURE DESIGN Michele Tais, D. C. Zamoner, Debora Barauna, Dalton Luiz Razera

B6 51 PHYSICOCHEMICAL UNDERPINNINGS BEHIND THE SYNTHESIS OF LAYERED DOUBLE HYDROXIDES: OPTIMIZATION OF THE UPSCALING CONDITIONS

T. L. P. Galvão, C. S. Neves, D. Mata, E. Malheiro, M. J. Ferreira, J. Tedim, M. G. S. Ferreira

B7 52 MICROREACTORS WITH NANOFIBERS EMBEDDED USING ELECTRODYNAMIC FOCUSING

Ana Neilde Rodrigues da Silva, Rogerio Furlan, Demétrius Saraiva Gomes, Maria Lúcia Pereira Silva

B8 54 EVIDENCE OF CUBIC Cu3As AS THE STABLE ARSENIDE AT LOW TEMPERATURES IN ARSENICAL COPPERS

Filipa Pereira, Rui J. C. Silva, António M. Monge Soares, Maria Fátima Araújo, Maria José Oliveira, Rui M. S. Martins, Norbert Schell

B9 67 PRECIPITATION HARDENING MECHANISM OF Cu-Ni-Zn-Al ALLOYS

E. Donoso, M. J. Diánez, J. M. Criado, M. J. Sayagués, G. Díaz, L. Olivares

B10 70 RHEOLOGICAL AND MORPHOLOGICAL CHARACTERIZATION OF PP-CORK COMPOSITES

S. P. M. Silva, P. S. Lima, J. Luís, T. Carvalho, L. S. O. Pires, R. Torcato, J. M. Oliveira

B11 87 MULTIFUNCTIONAL MATERIALS FOR BONE CANCER TREATMENT

Anton Ficai, Maria Sonmez, Madalina Giorgiana Albu, Denisa Ficai, Coralia Bleontu, Ecaterina Andronescu

B12 89 SYNTHESIS AND CHARACTERIZATION OF COMPOSITE MATERIALS BASED ON POLYPROPYLENE AND SILICON CARBIDE

Denisa Ficai, Maria Sonmez, Anton Ficai, Laurentia Alexandrescu, Ecaterina Andronescu

B13 99 THERMAL CHARACTERISTICS OF CO-DOPED BOROPHOSPHATE GLASS

A. A. S. Lopes, M. M. R. A. Lima, J. P. Veiga, B. Sava, L. Boroica, M. Elisa, D. Ulieru, R. C. C. Monteiro

B14 106 TIN (HYDR)OXIDES FOR HEXAVALENT CHROMIUM REMOVAL FROM DRINKING WATER

E. Kaprara, K. Kalaitzidou, N. Tziarou, G. Vourlias, K. Simeonidis, A. Zouboulis, M. Mitrakas

B15 108 THERMAL RESISTANCES POLYMER COMPOSITES REINFORCED WITH NANOPARTICLES

Mihai Georgescu, Denisa Ficai, Dana Gurau

B16 136 DEVELOPMENT OF PVA AND SEBS PIEZORESISTIVE POLYMERS BASED INKS FOR PRINTING TECHNOLOGIES

J. Oliveira, B. F. Gonçalves, P. Martins, P. Costa, G. Botelho, G. Rocha, Senentxu Lanceros-Mendez

B17 137 FABRICATION AND MECHANICAL PROPERTIES OF POLY(VINYLIDENE FLUORIDE) THREE DIMENSIONAL POROUS SCAFFOLDS

D. M. Correia, C. Ribeiro, V. Sencadas, G. Botelho, J. L. Gomes Ribelles, S. Lanceros-Méndez

B18 164 IBUPROFEN-LOADED NANOSTRUCTURED ZnO AND PU/ZnO COMPOSITES: CONTROL OF DRUG UPTAKE AND RELEASE

M. E. V. Costa, K. J. Debelak, A. Pires, M. H. V. Fernandes

B19 165 SPRAY-DRYING NANOSTRUCTURED HYDROXYAPATITE-CHITOSAN GRANULES FOR A CONTROLED DELIVERY OF DEXAMETHASONE

Mikalai Zhuk, Maria Elisabete Vieira Costa, Maria Margarida Almeida

B20 167 THE EFFECT OF SILVER CONTENT AND CRISTALINITY ON THE BIOACTIVE BEHAVIOUR OF CALCIUM-PHOSPHATE-BASED GLASS-CERAMICS

M. N. Capela, M. P. Seabra, S. D. de Campos, D. M. Tobaldi, M. J. Ribeiro, M. H. V. Fernandes

B21 177 MECHANICAL BEHAVIOUR OF AMAZONIAN RUBBER UNDER TENSILE TESTS FOR SUSTAINABLE PRODUCTS

Isabella Santos, Matheus Igreja, Manoel Silva, Norma E. S. Beltrão, Nubia S. Santos

B22 179 EFFECT OF POWDER SIZE ON THE STABILIZATION MECHANISM OF ZIRCONIA IN AQUEOUS SUSPENSION

Micaela Rodrigues, Susana Olhero, Célio F. Pina, Alberto C. Ferro, Mafalda Guedes


B23 183 PLAYING WITH IONIC LIQUIDS TO UNCOVER NOVEL POLYMERELECTROLYTES

R. Leones, F. Sentanin, J. M. S. S. Esperança, A. Pawlicka, M. M. Silva

B24 184 IONIC, PARAMAGNETIC AND PHOTOPHYSICAL PROPERTIES OF A NEW BIOHYBID MATERIAL INCORPORATING COPPER PERCHLORATE

R. Leones, J. P. Donoso, C. J. Magon, I. D. A. Silva, A. S. S. de Camargo, A. Pawlicka, M. M. Silva

B25 186 A STUDY ON THE INFLUENCE OF WORKING PARAMETERS IN THE POLISHING OF ORNAMENTAL STONES

A. R. Barbosa, P. M. Amaral, L. Guerra Rosa, J. C. Pereira

B26 187 USE OF A SURFACTANT (CAC) FOR CONTROLLING THE RELEASE OF OPHTALMIC DRUGS FROM HYDROGELS FORCONTACT LENS

Ana Valente, Andreia Pimenta, Benilde Saramago, Ana Paula Serro

B27 192 OBTAINING AND CHARACTERIZATION OF NANOCOMPOSITE BASED ON POLYPROPYLENE/GRAPHENE OXIDE

M. Sonmez, A. Ficai, D. Ficai, D. F. Sava, D. Gurau

B28 193 COMPOSITE MATERIALS BASED ON SODIUM ALGINATE USED TO REMOVE HEAVY METAL IONS

M. Sonmez, A. Ficai, D. Ficai, Dragos Gudovan, E. Andronescu

B29 204 INFLUENCE OF AGING TREATMENT ON THE THERMOPHYSICAL CHARACTERISTICS AND MECHANICAL PROPERTIES OF FORGING WIRE NiTi ALLOY RICH IN Ni FOR SUPERELASTIC APPLICATIONS

Patrícia Freitas Rodrigues, Francisco Manuel Braz Fernandes, Edir Neves Texeira, Shimeni Baptista Ribeiro, Andersan dos Santos Paula

B30 209 INTEGRATED EQUIPMENT FOR THE CHARACTERIZATION OF ORGANIC LIGHT EMITTING DIODES

João Patrício, André Pinto, Luiz Pereira, Luís Rino

B31 217 PROCESSING AND CHARACTERIZATION OF PVDF-BASED POROUS MEMBRANES VIA AIR DRYING AND NON-SOLVENT INDUCED PHASE SEPARATION

V. F. Cardoso, H. Salazar, C. Ferreira, A. C. Lopes, G. Botelho, S. Lanceros-Méndez

B32 258 CHARACTERIZATION OF TITANIUM-HYDROXYAPATITE BIOCOMPOSITES PROCESSED BY DIP-COATING

R. Baptista, D. Gadelha, M. Bandeira, D. Arteiro, M. I. Delgado, A. C. Ferro, M. Guedes

B33 274 PROTIC IONIC LIQUID MODIFIED MESOPOROUS SILICA OBTAINED BY THE SOL-GEL TECHNIQUE: SYNTHESIS AND CHARACTERIZATION

Maria Vanessa Souza Oliveira, Paulo Alexandre Almeida Rodrigues, Silvana Mattedi, Filipe José Oliveira, Rui Ferreira e Silva, Cleide Mara Faria Soares, Álvaro Silva Lima

B34 262 DESIGN STUDY FOCUSED ON SUSTAINABLE DEVELOPMENT OF A NATURAL PINE RESIN PRODUCT

Cristiano de Sousa, Jorge Lino Alves, Rui Mendonça

B35 277 ENHANCED FLUORESCENCE OF FLAVIN MONONUCLEOTIDE BY SELF-ASSEMBLED SILVER NANOPARTICLES

A. Synak, B. Grobelna, I. Gryczynski, S. Raut, P. Bojarski

B36 291 ELECTRODYNAMIC FOCUSING OF POLYVINYLPYRROLIDONE FIBERS WITH CARBON BLACK

Demétrius Saraiva Gomes, Ana Neilde Rodrigues da Silva, Valtemar Fernandes Cardoso, Rogerio Furlan, Maria Lúcia Pereira da Silva

B37 292 FORMATION AND CRYSTALLIZATION OF ZINC BOROSILICATE GLASSES

A. T. G. Kullberg, A. A. S. Lopes, J. P. B. Veiga, M. M. R. A. Lima, R. C. C. Monteiro

B38 299 ALOE VERA LOADED BOROSILICATE GLASS/PCL COMPOSITES - STRUCTURAL STUDIES

P. F. Lito, N. Ahmad, J. M. Oliveira, J. Knowles, M. H. V. Fernandes

B39 302 ELECTROSPUN MATS OF BIODEGRADABLE CHITOSAN-BASED POLYURETHANE UREAS

Vieira, Tânia, Borges, João Paulo, Henriques, Célia

B40 312 ZIRCONIA SUBSTRATES WITH MICROPATTERNED SiO2 COATINGS FOR GUIDED BONE REGENERATION

A. Carvalho, M. H. Fernandes, F. J. Monteiro

B41 321 DIELECTRIC AND MECHANICAL PROPERTIES OF LMO-BASED CERAMICS

Aldona Zarycka, Jan Ilczuk

B42 325 CARRAGEENAN-BASED BIOMATERIALS FOR APPLICATIONS AS POLYMER ELECTROLYTES

S. C. Nunes, R. F. P. Pereira, M. M. Silva, P. Almeida, V. de Zea Bermudez

B43 331 PORCELAIN POWDERS FOR THREE-DIMENSIONAL (3D) PRINTING

P. L. Marques, P. G. P. Duarte, J. Marinheiro, P. M. Vilarinho

B44 333 STRUCTURAL ANALYSIS OF COBALT FERRITES DOPED WITH NIOBIUM OXIDE

Francisco E. Carvalho, Anderson K. Hirata, Leonardo V. Lemos, Antonio C. C. Migliano, Robert C. Pullar

B45 337 MECHANICAL AND METALLURGICAL CHARACTERIZATION OF HOT PRESSED DIAMOND REINFORCED COPPER-NICKEL ALLOYS

Ferreira P., Henriques, B., Silva F., Miranda, G., Buciumeanu, M., Cabral, A., Fredel M.


B46 339 SIMULATIONS OF EQUIAXED DENDRITIC GROWTH EVOLUTIONS OF AL-CU ALLOY UNDER COOLING RATE CONSTANT

M.C.C.Paresque, P. A. D. Jácome, F. S. Melo, D. M. Silva1, I. L. Ferreira, A. F. Ferreira

B47 341 MICROSTRUCTURE MODELLING IN CAST SUPER DUPLEX STAINLESS STEELS

Ricardo O. Sousa, Pedro Lacerda, Paulo J. Ferreira, Laura M. M. Ribeiro

B48 342 3D-REINFORCEMENT TECHNIQUES FOR CO-BONDED CFRP JOINTS

Manuel Tiago von Hafe P. F. Silva, Pedro P. Camanho, Paulo M. S. T. de Castro, António T. Marques

B49 352 CHITOSAN-CELLULOSE DERIVATIVE (HPMC) HYDROGEL FILMS: THERMAL-MECHANICAL PROFILE

Sandra Cerqueira Barros, Carlos M. Costa, Senentxu Lanceros Mendez, M. N. Tamaño Maciavello, J. L. Gomez Ribelles, Franciani Sentanin, Agnieszka Pawlicka Maule, Maria Manuela Silva

B50 355 CORRELATIVE SEM AND AFM OBSERVATIONS OF SIALOLITHS

T. Seixas, P. Nolasco, P. V. Coelho, C. Coelho, A. P. Alves de Matos, R. C. Martins, P. A. Carvalho

B51 356 X-RAY COMPUTED MICROTOMOGRAPHY OF SIALOLITHS

P. Nolasco, T. Seixas, P.V. Coelho, C. Coelho, D. Angelo, M. Nunes, F.S. Silva, J.R. Dias, N.M. Alves, A. Maurício, Manuel F.C. Pereira, A.P. Alves de Matos, R.C Martins, P.A. Carvalho

B52 359 ACCUMULATIVE ROLL BONDING OF Al/Cu FOILS: PHASE EVOLUTION WITH HEAT TREATING

O. Emadinia, S. Simões, F. Viana, M.F. Vieira



TECHNICAL EXHIBITORS

PLATINUM SPONSORS

GOLD SPONSORS

SILVER SPONSORS

INSTITUTIONAL SUPPORT

SUPPORTER


Luís Filipe Malheiros FEUP (Chairman) António Fernando Silva FCUP António Paulo Monteiro Baptista FEUP António Torres Marques FEUP Carlos Sá CEMUP Fernando Jorge Lino Alves FEUP Filomena Viana FEUP João Lopes dos Santos FCUP Laura Ribeiro FEUP Manuel Vieira FEUP

CONTACTS: Faculdade de Engenharia da Universidade do Porto

R. Dr. Roberto Frias, s/n 4200-465 Porto

Portugal

Tel: +351 22 041 3111

Fax: +351 22 041 4900

Email: [email protected]

Webpage: http://paginas.fe.up.pt/~materiais2015/

mailto:%[email protected]

http://paginas.fe.up.pt/~materiais2015/


Abel Dias dos Santos, P Adélio Mendes, P Albano Cavaleiro, P Alberto Ferro, P Altino Loureiro, P Amélia Almeida, P Ana Maria Pinto, P Ana Maria Senos, P Aníbal Guedes, P Ascensão Lopes, P Cândida Vilarinho, P Carlos Fonseca, P Carlos Silva Ribeiro, P Carmén Rangel, P Cláudio Schön, BR Dalton Luis Razera, BR Delfim Soares, P Dulce de Meira Albach, BR Eduardo Soares, P Elvira Fortunato, P Emília Rosa, P Fernanda Margarido, P Fernando Castro, P Fernando Jorge Monteiro, P Filipe Oliveira, P Francisco Braz Fernandes, P Hélder Puga, P Helena Braga, P Irene Cano, SP Joana Espain, P Joana Moreira Dias, P Joana Sousa Coutinho, P João Labrincha, P João Moura Bordado, P Joaquim Barbosa, P Joaquim Vieira, P

Jon Sertucha, SP Jorge Frade, P José António Simões, P José Covas, P José Domingos Santos, P José Luís Santos, P Jose Manuel Torralba, SP Josep Maria Guilemany, SP Liliana Duarte, CH Lucas Silva, P Luís Gil, P Luís Guerra Rosa, P Luís Juvandes, P Lurdes Lopes, P Manuel Fernando Pereira, P Maria Helena Fernandes, P Maria Júlia Cristóbal Ortega, SP Mário Ferreira, P Núria Cinca (SP) Patrícia Carvalho, P Paula Vilarinho, P Paulo Jorge Ferreira, USA Paulo Tavares de Castro, P Pedro Granja, P Rogério Colaço, P Rogério Simões, P Rosa Miranda, P Rui Jorge Silva, P Rui Silva, P Rui Vilar, P Sergi Dosta, SP Sónia Simões, P Teresa Cidade, P Teresa Duarte, P Teresa Vieira, P Valdemar Fernandes, P


Documents

FEUP, Porto, Portugal - paginas.fe.up.pt · FEUP, Porto, Portugal The Faculty of Engineering of the University of Porto (FEUP) Classical Orchestra is a project from FEUP’s Cultural