11
Features 3F, No.5 Industry E. Rd. IX Hsinchu Science Park, Hsinchu 30075 Taiwan TEL: +886-3-5788693 FAX: +886-3-5772320 E-mail: [email protected] RACK MOUNT IFDU-S Splice cabinet IFDU-T Termination cabinet IDFU-TS Splice and termination cabinet IMFDC Splice and termination cabinet IMCNP Connector network panel IZMPJ Fixed cabinet ITMVJ Cabinet with slide-out shelf IECNP ETSI Connector Network Panel 19” RACKS IMROM The complete FTTH solution IiSEVEN 600 and 800 mm wide 19" racks OPNET manufacturers comprehensive fiber optic cable management systems delivering high performance solutions for passive network installations. OPNET systems meet today’s requirements for tomorrow’s applications. These advanced modular fiber optic systems include the full range of passive components for singlemode and multimode applications that when combined, provide complete solutions for today’s applications, and maximize physical infrastructure performance, reliability, modularity and scalability. Content

Features - OPNET Technologies Rack Mount Splice Cabinet FEATURES The IFDU-S cabinet is based on universal optical distribution frames. The unified modular system enables easy reconfiguration

  • Upload
    hadieu

  • View
    220

  • Download
    5

Embed Size (px)

Citation preview

Features

3F, No.5 Industry E. Rd. IX Hsinchu Science Park, Hsinchu 30075 TaiwanTEL: +886-3-5788693 FAX: +886-3-5772320 E-mail: [email protected]

RACK MOUNTIFDU-S Splice cabinetIFDU-T Termination cabinetIDFU-TS Splice and termination cabinetIMFDC Splice and termination cabinetIMCNP Connector network panelIZMPJ Fixed cabinetITMVJ Cabinet with slide-out shelfIECNP ETSI Connector Network Panel

19” RACKSIMROM The complete FTTH solutionIiSEVEN 600 and 800 mm wide 19" racks

OPNET manufacturers comprehensive fiber optic cable management systems delivering high performance solutions for passive network installations. OPNET systems meet today’s requirements for tomorrow’s applications. These advanced modular fiber optic systems include the full range of passive components for singlemode and multimode applications that when combined, provide complete solutions for today’s applications, and maximize physical infrastructure performance, reliability, modularity and scalability.

Content

IFDU-S Rack Mount Splice Cabinet

FEATURES

The IFDU-S cabinet is based on universal optical distribution frames. The unified modular system enables easy reconfiguration and can be extended according to operator requirements. The IFDU-S provides splicing, storage and protection of up to 288 fiber splices in individually accessible trays.The slide-out and swing down shelf enables unrestricted front, rear and top access to the splicing area. Various types of splice trays can be used.

Splicing of up 288 fibers in one cabinetFixed or hinged cassette installationSlide-out and drop down shelfAluminum material - low weight and shipment costsBend radius protection protection enables managementand rearrangement of cable slackRemovable top provides unrestricted access to splicetray and fiber connectionsCable strain-relief hardware providedDurable powder coat finish – RAL 9006

Parts available separately

1 IFDU-BU-X_base unit5 IFDU-SS_sliding shelf6 IFDU-RC-X_rear cover7-10 IFDU-CH-X_cassette holder11 IFDU-TC_top cover12 IFDU-DM-X_front door metal (plexi)13 Key lock / latch14 UH-X_unit holder15 BRP reel

109

7

1

12

6

5

11

13

14

15

431,5

130

291

IFDU-T Termination CabinetThe IFDU-T cabinet is based on universal optical distribution frames. The unified modular system enables easy reconfiguration and can be extended according to operator needs. The IFDU-T provides termination in convenient housing unit. The IFDU-T terminates up to 144 fibers in a 3U distribution frame. This unit can take up to 12 snap-in coupling panels or prewired cassettes. The slide-out and swing down shelf enables unrestricted front, rear and top access to termination panels and cable reserve.

FEATURES

Splicing of up 288 fibers in one cabinetFixed or hinged cassette installationSlide-out and drop down shelfAluminum material - low weight and shipment costsBend radius protection protection enables managementand rearrangement of cable slackRemovable top provides unrestricted access to splicetray and fiber connectionsCable strain-relief hardware providedDurable powder coat finish – RAL 9006

Parts available separately

1 IFDU-BU-X_base unit5 IFDU-SS_sliding shelf6 IFDU-RC-X_rear cover7 IFDU-CP-X_connector panel12 IFDU-TC_top cover13 IFDU-DM-X_front door metal (plexi)14 Key lock / latch15 UH-X_unit holder16 BRP_reel radius protection

1

13

5

12

14

15

7

6

16

130

431,5

295

OFDU-TS Rack Mount Splice and Termination Cabinet

FEATURES

The IFDU-TS cabinet is based on universal optical distribution frames. The unified modular system enables easy reconfiguration and can be extended according to operator needs. The IFDU-TS provides splicing and termination within one convenient housing unit. The IFDU-TS terminates up to 144 fibers in a 3U distribution frame. This unit can take up to 12 snap-in coupling panels or prewired cassettes. The slide-out and swing down shelf enables unrestricted front, rear and top access to the splicing area and termination panels. Various types of splice trays can be used.

Splicing and termination in one cabinetSlide-out and drop down shelfAluminum material - low weight and shipment costsUp to 144 - fiber terminationSplicing in single splice trays, individual splice tray accessFixed or hinged cassette installationRemovable top and back cover enables unrestricted front,rear and top accessFor FTTH use - microtube holder includedLockable or latch door options are availableDurable powder coat finish - RAL 9006

Parts available separately

1 IFDU-BU-X_base unit5 IFDU-SS_sliding shelf6 IFDU-RC-X_rear cover7 IFDU-CP-X_connector panel8-11 IFDU-CH-X_cassette holder12 IFDU-TC_top cover13 IFDU-DM-X_front door metal (plexi)14 Key lock / latch15 UH-X_unit holder

1110

8

1

7

13

6

12

14

15

5

16

130

431,5

295

IMFDC Splice and Termination Cabinet

FEATURES

The IMFDC Cabinets offer termination and splicing within one convenient housing. The IMFDC terminates up to 144 fibers in a 6U frame. This unit accepts 12 snap-in coupling panels or prewired cassettes. Fibers are routed to the lower section of the unit where splice trays, fiber bundles, and budler tubes are stored. Various types of splice trays, blocks of 12 splice cassettes can be located on a pullout shelf, allowing easy access to the budler tube,fiber storage and splicing area. IMFDC-T is special variant which contains only 24 snap-in coupling panels for high density termination. It accommodates of up to 288 optical adapters.

Aluminium material providing low weight and shipping costsAccommodates up to 144 fiber splices or 288 optical adaptersSplicing in single splice trays or in block of 12 cassettesIndividual splice tray accessRemovable top and back cover allows unrestricted front,rear and top accessPrewired CAPM cassettes include connectorized fiberpigtails and adaptersKey lock and metal latch door options are availableDurable powder coat finishLabels provided to document splice and termination locations

Parts available separately

267

432305

IMCNP Rack Mount Connector Network Panel

FEATURES

The IMCNP Connector Network Panel is an economical rack mountable patch panel for use with splicing of manufactured pigtails, preterminated cables and field-installable connectors. The cables are strain-relieved at the rear of the unit. The pivoting shelf can be equipped with either a splice tray holder or bend radius protection which guides, stores and organizes excess slack. This prevents damage to fibers prior to routing into couplings.The IMCNP is used in installations where space is limited.

Splicing and termination optical cable in one boxAluminum material - low weight and shipment costsExtended (3 coupling panels per 1U) version availableSplice cassette holder enables cable termination with the helpof pigtail splicingAccommodates up to 24 fibers in 1 rack unitRemovable top cover provides unrestricted accessPivoting shelf eases connector routing and cable routingCable strain-relief and grounding provisionsAccepts industry standard connector typesFTTH use – microtubes holder includedPassed seismic tests according to ASME standardsApproved for construction of nuclear power plant components

Parts available separately

1 IMCNP-BU-X_base unit6 IMCNP-TS-1_twisting shelf7 IMCNP-CP-1_front panel8 IMCNP-TC_top cover9 Pin FH-M5-3810 Pin FH-M3-3011 UH-1_var112 Screw CNMP

1

7

8

611

12

10 9

34

431

273

IZMPJ Enclosed Cabinet

FEATURES

The IZMPJ enclosed cabinet introduces a compact, low cost solution for fiber optic cable termination. The IZMPJ series is ideal for rack-mounting in confined areas such as equipment enclosures where rack space is limited. The modular system allows splicing and termination of 48 fibers in rack height 1U.

FTTH use - holder for microtubes includedDesigned for microtubes terminationCompact robust designFixed shelfChangeable front panel, various coupling adaptorsCoupling adapters mounted on the face panelAccommodates up to 48 fibers in 1 rack unitRemovable top cover provides unrestricted accessDurable powder coat finishCable strain-relief and grounding provisionsAccepts the industry's most common connector types

Parts available separately

433

44

266

240

ITMVJ Cabinet With Slide-Out Shelf

FEATURES

The ITMVJ sliding shelf cabinet introduces a compact, low cost solution for fiber optic cable termination. The ITMVJ series is ideal for rack-mounting in confined areas such as equipment enclosures where rack space is limited. The cabinet is equipped with a slide-out shelf with splice tray holder. This allows easy access to the splicing area for optical network reconfiguration during operation and prevents damage to fibers prior to routing into adapters. The modular system allows splicing and termination of up to 48 fibers in rack height 1U.

FTTH use - holder for minicables or microtubesDesigned for cable or microtubes terminationCompact robust designSlide-out shelf provides unrestricted accessChangeable front panel, various adaptersCoupling adapters mounted on the face panelAccommodates up to 48 �bers in 1 rack unitDurable powder coat �nishCable strain-relief and grounding provisionsAccepts industry standard connector types

Parts available separately

219

431

44

IECNP ETSI Connector Network Panel

FEATURES

The IECNP cabinet is based on universal optical distribution frames. It provides splicing and termination within one convenient housing unit. The IECNP terminates up to 144 fibers in a 7SU (ETSI height) distribution frame. The swing-out shelf enables unrestricted front, rear and top access to the splicing area and termination panels.

IETSI rack standards compatibleAluminum material - low weight and shipment costsUp to 144 termination in 7SU (175 mm) IETSI heightSplicing and termination optical cable in one boxSplice cassette holder enables cable termination with the helpof pigtail splicingFixed or hinged cassette installationRemovable top cover provides unrestricted accessPivoting shelf eases connector routing and cable routingCable strain-relief and grounding provisionsAccepts the industry's most common connector types

Parts available separately

440

515533

254446.9

440

276.3

1.25

244.3

33.25

286.15

IMROM series

FEATURES

The IMROM is an optical fiber distribution/patch system for Passive Optical Networks. The main system application is fiber termination in Central Offices of FTTH networks. IMROM combines the advantages of the Central Office systems available on the market.

Maximum fiber density due to two-rowed fiber modules - 960/1920 fiber terminations for standard/SFF adapter systems per standard rack (1000 mm width, 2200 mm height)Comfortable patching with two-sided overlength patchcord storage3 di�erent rack heights: 32HU/1800 mm, 40HU/2200 mm, 48HU/2600 mm2 di�erent rack widths: 600 mm, 1000 mmOpen and closed rack versionsThe combined splice/patch fiber modules are 90 degrees rotatable and removable and are available in 2 sizes: 0.5 HU or 1 HU for 12/24 standard/SFF adapters per module (see technical data on page 4)Only one, uniform metal frontplate for all adapter types45 degrees, snap-in adapter holders for all conventional adapter types: SCsx, LCdx, E2000, LX.5, FC, STMinifuex for fiber protectionPossibility to blow up fibers directly to the fiber modulesIntegration of gas-blockers on incoming tubesSolutions for cross-connect and interconnect configurationsModular subunits for highest fiexibilityRear vertical cable guidance for incoming cablesBending radius protection of 30mm for fibers and patchcordsIntelligent patchcord management: Vertical patchcord cable guidance on left and right side Mandrels on left and right side of the rack provide sufficient space for patchcord overlength storageIntegrated patchcord management to adjacent racks avoids the usage of external ducts

IiSEVEN series

FEATURES

The IiSEVEN 19" rack has been designed to provide the user with an unmatched ratio between price, utility value and quality. This rack is the ideal choice for installers and end users who want to spend less time choosing between various options and configuring difficult product part numbers.After extensive research, we have prepared a portfolio of the most frequently used dimensions together with one universal design.

CodingIiSEVEN is a trade name; in all technical documents (data sheets, catalogue) IiSEVEN is referred to as RI7DimensionsIiSEVEN is available in most 42U and 45U standard heights, and the most frequently used small size – 21 and 27U; available footprints di�er slightly for the above mentioned heightsFrameThe frame is made from 1.5 mm high-quality sheet steel; the IiSEVEN cabinet has a high level of rigidity and stability (load rating 400 kg;decreased to 300 kg for 27U RI7 racks)ColorIiSEVEN is available in two colors: light grey (RAL 7035, Code - B) and black (RAL 9005, Code - H)OptionsIiSEVEN fully satisfies the requirements for safe housing of equipment,cabling, ventilation & power supplies. The range of options is reduced in comparison with the highly customizable ROF family. In case your requirements are more complex, please refer to the ROF family of racks or to the respective specialist rack series (ROS, ROR, ROP, RSB)