12
FCL Series Multi-Function CNC Lathes FCL-1840 • 1860 FCL-2140 • 2160 • 2180 FCL-2540 • 2560 • 2580 FCL-2660 • 2680 • 26120

FCL Series - Amazon Simple Storage Service · FCL Series Multi-Function CNC Lathes ... A Lathe with Digital Readout. ... Dmax Dtmax Dmax FOUR WAY TOOL POST Model Dmax Dtmax Lt

Embed Size (px)

Citation preview

FCL SeriesMulti-Function CNC Lathes

FCL-1840 • 1860 FCL-2140 • 2160 • 2180FCL-2540 • 2560 • 2580FCL-2660 • 2680 • 26120

MULTI-FUNCTION CNC LATHEFCL-18 • 21 • 25 • 26 Series

FCL-1840 • 1860FCL-2140 • 2160 • 2180FCL-2540 • 2560 • 2580FCL-2660 • 2680 • 26120

MACHINE FEATURES● A Combination of a High Precision Manual Lathe.● A Lathe with Digital Readout.● A Lathe with Powerfeed and Jog Modes.● A Lathe with Teach Mode for CNC Turning.● A Lathe with Fully CNC Capability Operation● A Simple and complex parts can be turned more efficiently by utilizing manual, teach

or CNC modes or combining these modes.● All models are equipped with a spindle servo drive.● Spindle speeds and feedrate are infinitely variable. Also, the spindle speeds will

automatically adjust to varying diameters and keep constant surface speed, resulting in higher quality parts and longer tool life.

● Threads tapers and contours are performed faster and more efficiently while eliminating manual set-up.

● Radial and spherical surfaces can be turned easily without using special tools or attachments.

● Programming is also made easier through using canned cycles which eliminate tool-path programming by automatically figuring rough and finish passes, (tool compensation is automatic).

2

FC

L Series F

CL-18 • 21 • 25 • 26

FCL-2560Note:Machine shown with optional accessories

FCL-1860Note:Machine shown with optional accessories

3

FC

L Series F

CL-18 • 21 • 25 • 26

MACHINE FEATURES

High Precision SpindleThe spindle is supported by accurately measured, selected and preloaded precision taper roller bearings. The spindle is assembled in a temperature controlled cleanroom to ensure high accuracy and rigidity through the full RPM range.

High Accuracy BallscrewsHardened and ground precision ballscrews mounted on high precision bearings on both X and Z axes result in long life and high accuracy. These accuracies are verified by state-of-the-art laser calibration equipment.

Versatile Apron ControlsSpecially designed handwheels with simultaneous movement of both X and Z axes and adjustable resolutions available.It can be shifted to left or right hand side.

Wear Resistant WaysThe machine guide ways, saddle and spindle bore are hardened and ground. The contact surface of the guide ways are also hand scraped and automatically lubed.Therefore, because of lower friction and reduced wear, high accuracy results can be obtained.

Manual TailstockThe heavy duty cast tailstock features a hardened and ground quill providing easy movement for precision cutting and drilling capability while maintaininghigh rigidity for part support.

Ø75 mm Quill diameter for 18/21/25 SeriesØ80 mm Quill diameter for 26 Series

4

FC

L Series F

CL-18 • 21 • 25 • 26

Heavy Duty HeadstockThe Chrome-Molybdenum Alloy Steel gears are hardened and precision-ground for long life and low noise.

The gears are supported by high load capacity precision bearings allowing a greater transmission of torsional forces for heavier cutting capability.

Patented cam driven auto. gear shifting mechanism.

Hardened & Ground GuidewaysThe machine bed is constructed with Meehanite castings. The machine guide ways are heat treated and precision ground, providing excellent rigidity and superb dampening capability for high metal removal during rough turning and exceptional surface finish during fine turning.

2”4”3”

BIG SPINDLE BORE

Model Standard Optional (A2-11)

FCL-1840 / 1860 56mm (2.2") D1-6 N/A

FCL-2140 / 2160 / 2180 / 2540 / 2560 / 2580 85mm (3.3") D1-8 105mm (4.1")

FCL-2660 / 2680 / 26120 85mm (3.3") D1-8 105mm (4.1")

5

FC

L Series F

CL-18 • 21 • 25 • 26

MACHINE CONSTRUCTION

Unit : mm (")

FAGOR 8055i Control● Easy to modify already existing part-programs, possible to mix

8055i operations with routines defines in ISO language.● Interactive graphic interface.● 10.4'' TFT color monitor.● Profile editor.● Integrated PLC.● Graphic display.● DNC software.● Programmable spindle speed.● Constant surface speed(css)function.● Ethernet● USB

SIEMENS 828D Control● 10.4'' TFT screen.● 2 axis AC servo motors.● "ShopTurn" software

Laser CalibrationAfter assembly, the machine tolerances are measured and verified by state-of-the-art laser calibration equipment.

Spindle Nose RunoutPlace a test indicator stylus on the external surface of the spindle nose at a right angle then rotate the spindle through 360 degrees.The indicator variation will be under 0.0075mm (0.0003").

INSPECTION

BIG SPINDLE BORE

6

FC

L Series F

CL-18 • 21 • 25 • 26

V8 Vertical turret

LtLt

Dtmax

Dmax

Dtmax

Dmax

FOUR WAY TOOL POSTModel Dmax Dtmax LtFCL-1840 / 1860 230mm (9.1") 460mm (18.1") 230mm (9.1")FCL-2140 / 2160 / 2180 310mm (12.2") 540mm (21.3") 270mm (10.6")FCL-2540 / 2560 / 2580 400mm (15.7") 630mm (24.8") 315mm (12.4")FCL-2660 / 2680 / 26120 400mm (15.7") 660mm (26") 330mm (13")

8 STATION TURRETModel Dmax Dtmax LtFCL-1840 / 1860 230mm (9.1") 460mm (18.1") 230mm (9.1")FCL-2140 / 2160 / 2180 310mm (12.2") 522mm (20.6") 261mm (10.3")FCL-2540 / 2560 / 2580 400mm (15.7") 522mm (20.6") 261mm (10.3")FCL-2660 / 2680 / 26120 400mm (15.7") 630mm (24.8") 330mm (13")

Optional Accessory1 Follow rest2 Quick change toolpost3 H4 electric turret

20x20mm(18 Series) 25x25mm (21/25/26 Series)

4 3-Jaw scroll chuck (manual)5 4-Jaw scroll chuck (manual)6 V8 Hydraulic vertical turret

20x20mm(18 Series) 25x25mm (21/25/26 Series)

7 Hydraulic scroll chuck system8 Face plate9 Live center (MT6#)10 SAUTER turret

20x20mm(18 Series) 25x25mm (21/25/26 Series)

11 Chip conveyer12 Hydraulic tailstock

Standard Accessory1 Steady rest2 Manual tailstock3 Automatic Lubrication system4 Worklight5 Coolant system6 Safety door with reinforce glasses7 Sleeve (MT#5/MT#6)8 Centers MT#59 X,Z axis electric handwheel10 Manual 4-station toolpost

(25x25mm)11 Tool box12 Fully Enclosed Splash Guard

(For machine with 2M. or smaller, between centers)

H4 Electric turret

MAX. TURNING DIAMETER

Steady rest 7

FC

L Series F

CL-18 • 21 • 25 • 26

LowGear

MidGear High Gear

0

TORQUE(N-m) POWER(kW)

SIEMENSSpindle Bore Ø85mm(3.3")

2250RPM

Spindle speed (rpm)

125

38N-m42N-m120N-m

180N-m

450 900 1350 1800 2250

2100

2800

3500

700

15

3

12

6

9

13.53259

2173

1400

822548

S1 (686N-m)S6-40% (762N-m)

S1S6-40%11

8

10

7

469

2143S1 (173N-m)

S6-40% (192N-m)

For FCL-21/25

40 156 715490

S1 (9kW)

S6-40% (13.5kW)

S1 (9kW)

S6-40% (13.5kW)

LowGear

MidGear High Gear

SIEMENSSpindle Bore Ø56mm(2.2")

3100RPM TORQUE(N-m) POWER(kW)

Spindle speed (rpm)

152

29N-m32N-m

1800

2400

3000

600

15

3

12

6

9

13.52754

1836

1200

617

411

S1 (580N-m)S6-40% (644N-m)

S1S6-40%13

8

10

7

624

2848

S1 (130N-m)S6-40% (144N-m)

0 620 1240 1860 2480 3100

For FCL-18

47 208 950680

S1 (9kW)

S6-40% (13.5kW)

S1 (9kW)

S6-40% (13.5kW)

90N-m135N-m

MidGear High Gear

0

TORQUE(N-m) POWER(kW)

SIEMENSSpindle Bore Ø105mm(4.1")

1500RPM

Spindle speed (rpm)

3000

4000

1000

2000

92

73N-m77N-m

5000

300 600 900 1200 1500

4954

1138932 S1 (333N-m)

S6-40% (353N-m)

S1 (1180N-m)S6-40% (1251N-m)

S1S6-40%

20

4

16

8

16.5

12

143303 13

226

30064

85

For FCL-26

32 113 515330 13751031

S1 (11kW)

S6-40% (16.5kW)

S1 (11kW)

306N-m204N-m

S6-40% (16.5kW)

LowGear

LowGear

MidGear High Gear

0

TORQUE(N-m) POWER(kW)

SIEMENSSpindle Bore Ø85mm(3.3")

2250RPM

Spindle speed (rpm)

125

51N-m147N-m221N-m

450 900 1350 1800 2250

2400

3200

4000

800

2668

1600

1009673

S1 (915N-m)S6-40% (915N-m)

S1S6-40%10

5

416

1905S1 (231N-m)

S6-40% (231N-m)

20

4

16

8

16.5

12

1413

1429

312

79

For FCL-26

40 156 715490

S1 (11kW)

S6-40% (16.5kW)

S1 (11kW)

S6-40% (16.5kW)

SIEMENS CONTROL FCL-26 SERIES CNC LATHE POWER TORQUE CHART

FAGOR CONTROL FCL-18/21/25/26 SERIES CNC LATHE POWER TORQUE CHART

LowGear

MidGear High Gear

0

TORQUE(N-m) POWER(kW)

FAGORSpindle Bore Ø85mm(3.3")

2250RPM

Spindle speed (rpm)

125

51N-m450 900 1350 1800 2250

2400

3200

4000

800

2668

1600

965

673

S1 (915N-m)

S6-40% (1220N-m)

S1S6-40%10

5 416

1905S1 (231N-m)

S6-40% (308N-m)

20

4

16

8

15.5

12

14.5

3826

67N-m

For FCL-21/25/26

40 156 715490

S1 (11kW)

S6-40% (15.5kW)

S1 (11kW)

S6-40% (15.5kW)

147N-m211N-m

LowGear

MidGear High Gear

FAGORSpindle Bore Ø56mm(2.2")

3100RPMTORQUE(N-m) POWER(kW)

Spindle speed (rpm)

152

16N-m21N-m

960

1280

1600

320

10

2

8

4

6

1578

1127

640

353

252

S1 (322N-m)S6-40% (419N-m)

S1S6-40%12

4

555

S1 (72N-m)S6-40% (94N-m)

0 620 1240 1860 2480 3100

7

5.5

7.7

121

253254

1

For FCL-18

47 208 950680 2468

S1 (5.5kW)

S6-40% (7.7kW)

S1 (5.5kW)

S6-40% (7.7kW)

55N-m77N-m

SPINDLE MOTOR OUTPUT

SIEMENS CONTROL FCL-18/21/25 SERIES CNC LATHE POWER TORQUE CHART

8

FC

L Series F

CL-18 • 21 • 25 • 26

LowGear

MidGear High Gear

0

TORQUE(N-m) POWER(kW)

SIEMENSSpindle Bore Ø105mm(4.1")

1500RPM

Spindle speed (rpm)

2700

3600

900

1800

92 53N-m58N-m

4500

249N-m166N-m

300 600 900 1200 1500

15

3

12

6

9

13.54034

2690

1138

759 S1 (240N-m)S6-40% (266N-m)

S1 (850N-m)S6-40% (944N-m)

S1S6-40%

For FCL-21/25

32 113 515330

S1 (9kW)

S6-40% (13.5kW)

S1 (9kW)

S6-40% (13.5kW)

0

TORQUE(N-m) POWER(kW)

FAGORSpindle Bore Ø105mm(4.1")

1500RPM

SPINDLE SPEED (rpm)

3000

4000

1000

2000

92

77N-m105N-m

5000

300 600 900 1200 1500

4737

1336

932 S1 (353N-m)S6-40% (479N-m)

S1 (1250N-m)

S6-40% (1698N-m)

S1S6-40%

20

4

16

8

123303

15.5

For FCL-21/25/26

LowGear

MidGear High Gear

32 113 515330

S1 (11kW)

S6-40% (15.5kW)

S1 (11kW)

S6-40% (15.5kW)

291N-m204N-m

SPINDLE MOTOR OUTPUT

AB:2,190mm (86.2”)

C:2,100mm (82.7”)

B:1,950mm (77")

C:2,040mm (80")

A

AB:2,190mm (86.2”)

C:2,100mm (82.7”)

B:1,950mm (77")

C:2,040mm (80")

A

Model A B C

FCL-1840 / 2140 / 2540

2,700mm(106")

1,950mm(77")

2,040mm(80")

FCL-1860 / 2160 / 2560

3,200mm(126")

1,950mm(77")

2,040mm(80")

FCL-2180 / 2580

3,700mm(146")

1,950mm(77")

2,040mm(80")

Model A B C

FCL-2660 3,830mm(150.8")

2,190mm(86.2")

2,100mm(82.7")

FCL-2680 4,330mm(170.4")

2,190mm(86.2")

2,100mm(82.7")

FCL-26120 5,330mm(209.8")

2,190mm(86.2")

2,100mm(82.7")

GENERAL SPECIFICATIONS

AB:2,190mm (8602")

C:2

1,00

mm

(82.

7")

Unit : mm (")

Unit : mm (")

9

FC

L Series F

CL-18 • 21 • 25 • 26

GENERAL SPECIFICATIONSMODEL FCL-1840 / 60 FCL-2140 / 60 / 80 FCL-2540 / 60 / 80 FCL-2660 / 80 / 120

SwingSwing Over Bed 460mm (18.1") 540mm (21.3") 630mm (24.8") 660mm (26")Maximum Machining Diameter 460mm (18.1") 540mm (21.3") 630mm (24.8") 660mm (26")Swing Over Cross-Slide 230mm (9.1") 310mm (12.2") 400mm (15.7") 400mm (15.7")Center Height 230mm (9.1") 270mm (10.6") 315mm (12.4") 330mm (13")

Distance Between Centers 1,000 / 1,500 / 2,000mm(39.4" / 59.1" / 78.7")

1,000 / 1,500 / 2,000mm(39.4" / 59.1" / 78.7")

1,500 / 2,000 / 3,000mm(59.1" / 78.7" / 118.1")

Headstock

Spindle Speeds 33-3,100rpm (D1-6) 27~2,250rpm (D1-8), Opt. 80~1,500rpm 27~2,250rpm (D1-8), Opt. 80~1,500rpm(A2-11)/10~800 rpm (A2-11)

27~2,250rpm (D1-8), Opt. 80~1,500rpm(A2-11)

Spindle Nose D1-6 D1-8, Opt. A2-11 D1-8, Opt. A2-11

Spindle Bore Ø56mm (2.2") (D1-6) Ø85mm (3.3") (D1-8), Opt. Ø105mm (4.1") (A2-11)

Ø85 (3.3")mm (D1-8), Opt. Ø105 (4.1")mm (A2-11)

Taper In Spindle MT#6 1/16, Opt. 1/20 1/16, Opt. 1/20

Saddle

Longitudinal Travel(Z Axis) 900 / 1,400 / 1,900mm(35.4" / 55.1" / 74.8")

850 / 1,350 / 1,850mm(33.5" / 53.1" / 73")

850 / 1,350 / 1,850mm(33.5" / 53.1" / 73")

1,480 / 1,980 / 2,980mm(58.3" / 78" / 117.3")

Cross-Slide Travel(X Axis) 280mm (11") 350mm (13.8") 350mm (13.8") 450mm (17.7")Size Of Tool Post Shank 25mm (1") 25mm (1")

Tailstock

Diameter 75mm (3") 75mm (3") 80mm(3.2"), Opt.105mm (4.1")

Travel 210mm (8.3") 210mm (8.3") 220mm (8.7")Taper MT#5 MT#5

Motor

Spindle Motor

FAGOR: 5.5kW / 7.7kW(S1 / S6-40%) FAGOR: 11kW / 15.5kW (S1 / S6-40%) FAGOR: 11kW / 15.5kW (S1/S6-40%)

SIEMENS: 9kW / 13.5kW(S1 / S6-40%) SIEMENS: 9kW / 13.5kW (S1 / S6-40%) SIEMENS: 9kW / 13.5kW (S1 / S6-40%) SIEMENS: 11kW / 16.5kW (S1 / S60-40%)

Axis X/Z X: 1kW , Z: 1.5kW X: 1kW , Z: 1.5kWCoolant Pump Motor 1/10 kW 1/10 kW

Axis FeedrateFeedrates X/Z 5,000mm/min (196.9") 5,000mm/min (196.9")Rapid Traverse X/Z 5,000 / 8,000mm/min (196.9"/315") 5,000 / 8,000mm/min (196.9"/315")

Accuracy (VDI3441)Positioning Accuracy X: 0.012mm , Z: 0.012mm X: 0.012mm , Z: 0.012mm Repeatability X: 0.007mm , Z: 0.007mm X: 0.007mm , Z: 0.007mm

GeneralRated Power, Approx 16 KVA 20 KVA 20 KVAWidth of Bed 350mm (13.8") 350mm (13.8") 450mm (17.7")

Approx. Machine Weight 2,900 / 3,400 kgs(6,380 / 7,480 lbs)

3,200 / 3,700 / 4,200 kgs(7,040 / 8,140 / 9,240 lbs)

3,350 / 3,850 / 4,350 kgs(7,370 / 8,470 / 9,570 lbs)

4,400 / 5,100 / 5,600 kgs(9,680 / 11,220 / 12,320 lbs)

L 2,700 / 3,200 / 3,700mm (106" / 126" / 146") 2,700 / 3,200 / 3,700mm (106" / 126" / 146") 3,830 / 4,330 / 5,330mm (150.8" / 170.4" / 209.8")

Floor Space W 1,950mm (77") 1,950mm (77") 2,190mm (86.2")H 2,040mm (80" ) 2,040mm (80" ) 2,100mm (82.7")

※ Note: The manufacturer reserves the right to modify the design, specifications,mechanisms...etc. of the machine without prior notice. All the specifications shown above are just for reference.10

FC

L Series F

CL-18 • 21 • 25 • 26

GENERAL SPECIFICATIONSMODEL FCL-1840 / 60 FCL-2140 / 60 / 80 FCL-2540 / 60 / 80 FCL-2660 / 80 / 120

SwingSwing Over Bed 460mm (18.1") 540mm (21.3") 630mm (24.8") 660mm (26")Maximum Machining Diameter 460mm (18.1") 540mm (21.3") 630mm (24.8") 660mm (26")Swing Over Cross-Slide 230mm (9.1") 310mm (12.2") 400mm (15.7") 400mm (15.7")Center Height 230mm (9.1") 270mm (10.6") 315mm (12.4") 330mm (13")

Distance Between Centers 1,000 / 1,500 / 2,000mm(39.4" / 59.1" / 78.7")

1,000 / 1,500 / 2,000mm(39.4" / 59.1" / 78.7")

1,500 / 2,000 / 3,000mm(59.1" / 78.7" / 118.1")

Headstock

Spindle Speeds 33-3,100rpm (D1-6) 27~2,250rpm (D1-8), Opt. 80~1,500rpm 27~2,250rpm (D1-8), Opt. 80~1,500rpm(A2-11)/10~800 rpm (A2-11)

27~2,250rpm (D1-8), Opt. 80~1,500rpm(A2-11)

Spindle Nose D1-6 D1-8, Opt. A2-11 D1-8, Opt. A2-11

Spindle Bore Ø56mm (2.2") (D1-6) Ø85mm (3.3") (D1-8), Opt. Ø105mm (4.1") (A2-11)

Ø85 (3.3")mm (D1-8), Opt. Ø105 (4.1")mm (A2-11)

Taper In Spindle MT#6 1/16, Opt. 1/20 1/16, Opt. 1/20

Saddle

Longitudinal Travel(Z Axis) 900 / 1,400 / 1,900mm(35.4" / 55.1" / 74.8")

850 / 1,350 / 1,850mm(33.5" / 53.1" / 73")

850 / 1,350 / 1,850mm(33.5" / 53.1" / 73")

1,480 / 1,980 / 2,980mm(58.3" / 78" / 117.3")

Cross-Slide Travel(X Axis) 280mm (11") 350mm (13.8") 350mm (13.8") 450mm (17.7")Size Of Tool Post Shank 25mm (1") 25mm (1")

Tailstock

Diameter 75mm (3") 75mm (3") 80mm(3.2"), Opt.105mm (4.1")

Travel 210mm (8.3") 210mm (8.3") 220mm (8.7")Taper MT#5 MT#5

Motor

Spindle Motor

FAGOR: 5.5kW / 7.7kW(S1 / S6-40%) FAGOR: 11kW / 15.5kW (S1 / S6-40%) FAGOR: 11kW / 15.5kW (S1/S6-40%)

SIEMENS: 9kW / 13.5kW(S1 / S6-40%) SIEMENS: 9kW / 13.5kW (S1 / S6-40%) SIEMENS: 9kW / 13.5kW (S1 / S6-40%) SIEMENS: 11kW / 16.5kW (S1 / S60-40%)

Axis X/Z X: 1kW , Z: 1.5kW X: 1kW , Z: 1.5kWCoolant Pump Motor 1/10 kW 1/10 kW

Axis FeedrateFeedrates X/Z 5,000mm/min (196.9") 5,000mm/min (196.9")Rapid Traverse X/Z 5,000 / 8,000mm/min (196.9"/315") 5,000 / 8,000mm/min (196.9"/315")

Accuracy (VDI3441)Positioning Accuracy X: 0.012mm , Z: 0.012mm X: 0.012mm , Z: 0.012mm Repeatability X: 0.007mm , Z: 0.007mm X: 0.007mm , Z: 0.007mm

GeneralRated Power, Approx 16 KVA 20 KVA 20 KVAWidth of Bed 350mm (13.8") 350mm (13.8") 450mm (17.7")

Approx. Machine Weight 2,900 / 3,400 kgs(6,380 / 7,480 lbs)

3,200 / 3,700 / 4,200 kgs(7,040 / 8,140 / 9,240 lbs)

3,350 / 3,850 / 4,350 kgs(7,370 / 8,470 / 9,570 lbs)

4,400 / 5,100 / 5,600 kgs(9,680 / 11,220 / 12,320 lbs)

L 2,700 / 3,200 / 3,700mm (106" / 126" / 146") 2,700 / 3,200 / 3,700mm (106" / 126" / 146") 3,830 / 4,330 / 5,330mm (150.8" / 170.4" / 209.8")

Floor Space W 1,950mm (77") 1,950mm (77") 2,190mm (86.2")H 2,040mm (80" ) 2,040mm (80" ) 2,100mm (82.7")

※ Note: The manufacturer reserves the right to modify the design, specifications,mechanisms...etc. of the machine without prior notice. All the specifications shown above are just for reference. 11

FC

L Series F

CL-18 • 21 • 25 • 26

H/B818III H/B1224III H/B1640III H/B2440III H/B2460III H/B2480IIIA 1,757 (69") 2,376 (93.5") 3,493 (137.5") 3,926 (154.5") 4,926 (194") 6,080mm (239 3/8")B 1,330 (52") 1,150 (45.2") 1,445 (57.5") 2,100 (82.7") 3,100 (122") 4,100mm (161.4")C 2,021 (80") 2,113 (83") 2,133 (83") 2,780 (109.4")D 1,504 (59") 2,625 (103.3") 2,822 (111.1") 3,842 (151.3")E 2,746 (108") 3,200 (126") 4,165 (164") N / AF 2,043 (80") N / A N / A N / AG 2,527 (100") N / A N / A N / AH 1,062 (42") 970 (38.1") 975 (38.3") 880 (34.6")I 2,346 (92") 2,650 (104.3") 3,614 (142.3") 3,500 (137.8) 4,500 (177.1) 6,000 (236.2")J N / A 1,855 (73") 2,052 (80.8") N / A

注意:本公司隨時在進行研究改進工作,因此保有隨時更改設計、規格尺寸及機械結構之權利。

SMART-H/B818 III SMART-H/B12/16 III SMART-H/B24 III

機械尺寸

H/B818III H/B1224III H/B1640III H/B2440III H/B2460III H/B2480IIIA 1,757 (69") 2,376 (93.5") 3,493 (137.5") 3,926 (154.5") 4,926 (194") 6,080mm (239 3/8")B 1,330 (52") 1,150 (45.2") 1,445 (57.5") 2,100 (82.7") 3,100 (122") 4,100mm (161.4")C 2,021 (80") 2,113 (83") 2,133 (83") 2,780 (109.4")D 1,504 (59") 2,625 (103.3") 2,822 (111.1") 3,842 (151.3")E 2,746 (108") 3,200 (126") 4,165 (164") N / AF 2,043 (80") N / A N / A N / AG 2,527 (100") N / A N / A N / AH 1,062 (42") 970 (38.1") 975 (38.3") 880 (34.6")I 2,346 (92") 2,650 (104.3") 3,614 (142.3") 3,500 (137.8) 4,500 (177.1) 6,000 (236.2")J N / A 1,855 (73") 2,052 (80.8") N / A

注意:本公司隨時在進行研究改進工作,因此保有隨時更改設計、規格尺寸及機械結構之權利。

SMART-H/B818 III SMART-H/B12/16 III SMART-H/B24 III

機械尺寸

All content is for reference only and may be subject to change without prior notice or obligation.

CA

T: 2

816-

0002

7C00

/ 20

1308

/ 10

00P

1

OUTLINEDTYPE

NOTOUTLINEDTYPE

OUTLINEDTYPE

©19

78-2

013

® All

Righ

ts R

eser

ved.

1,855 (73") 2,052 (80.8")注意:本公司隨時在進行研究改進工作,因此保有隨時更改設計、規格尺寸及機械結構之權利。

Grinding Machines Grinding Machines Turning Machines Milling Machines